| Age | Commit message (Collapse) | Author |
|---|
|
Also, avoid the need for putting `_XOPEN_SOURCE` in every test file.
|
|
|
|
|
|
This changes only code, no string literals or comments.
|
|
follow TokTok#731. This commit
completely removed all things in namespace bit_rate, and deprecated
functions are to be added back in another commit. set_xxx() is treadted
as a property of namespace audio&video, same as bit_rate change event.
toxav_basic_test is fixed, either.
|
|
Fixes #572.
As discussed in the issue, there's a risk that toxcore may not hold the
maximum bitrates libvpx supports, if toxcore insists on using integer
type. I initially proposed to have another flag in set(), so that we can
use unsigned type instead. iphydf came up with a better solution, that is
splitting the original functions, one for audio, one for video. Now, we
could safely replace int32_t with uint32_t.
Also: clean video_bit_rate_invalid()
Though this is not a part of issue #572, as it's used in the
toxav_bit_rate_set(), i cleaned the code. As mannol said, there should be
a check. Uint32_t is large enough to hold the maximum bitrates libvpx
supports, but user may pass a value larger than uint while smaller than
uint32_t. Thanks to the reminding from nurupo, it's no longer a stub
function.
Bitrate error enums are shared for both audio and video
https://github.com/TokTok/c-toxcore/pull/578#issuecomment-360095609, just
as iphydf said.
|
|
Tests are not actually ran on appveyor for now, since they all fault for
some reason. For now, we just build them. Also, some tests are disabled
on msvc entirely, because they don't even compile. We'll need to look
into those, later. They are disabled using `MSVC_DONT_BUILD`.
|
|
Also fix a mistake with forgotten braces around parameter
|
|
This reverts commit 59e2a844f04a8725e8079f854158aa86ef5988b2, and
defines _DARWIN_C_SOURCE in toxcore/network.c
|
|
This reverts commit f3469070fe899e8e4fd88665386a55bad9f77cd8.
|
|
- CFLAG gnu99 was changed to c99.
- CXXFLAG c++98 was changed to c++11.
- CFLAG -pedantic-errors was added so that non-ISO C now throws errors.
- _XOPEN_SOURCE feature test macro added and set to 600 to expose SUSv3
and c99 definitions in modules that required them.
- Fixed tests (and bootstrap daemon logging) that were failing due to
the altered build flags.
- Avoid string suffix misinterpretation; explicit narrowing conversion.
- Misc. additions to .gitignore to make sure build artifacts don't wind
up in version control.
|
|
|
|
Previously, all log messages generated by tox_new (which is quite a lot)
were dropped, because client code had no chance to register a logging
callback, yet. This change allows setting the log callback from the
beginning and removes the ability to unset it.
Since the log callback is forever special, since it can't be stateless,
we don't necessarily need to treat it uniformly (with `event`).
|
|
Cleanups:
- Fix header guards to not use reserved names.
- Avoid name shadowing.
- Removed an unused variable found by avoiding name shadowing.
|
|
- All global variables should be static unless they have an explicit
extern declaration in a header file.
- `to_compare` was not used in encryptsave and toxav tests.
- `break` in switch cases is not required directly after `return`,
`goto`, or a noreturn function like `abort`.
|
|
This reverts commit 21f8db12c45bd56293262cd4abfb73cd9abec821.
It is currently broken. Incoming call callbacks are not invoked, and
instead the client goes offline immediately.
|
|
|
|
In the future, all TODOs added either need a bug number (TODO(#NN)) or a
person's github user name. By default, I made irungentoo the owner of
all toxcore TODOs, mannol the owner of toxav TODOs, and myself the owner
of API TODOs.
|
|
- Any non-externally-visible declarations should be `static`.
- Casting away the `const` qualifier from pointers-to-const is
dangerous. All but one instance of this are now correct. The one
instance where we can't keep `const` is one where toxav code actually
writes to a chunk of memory marked as `const`. This code also assumes
4 byte alignment of data packets. I don't know whether that is a valid
assumption, but it's likely unportable, and *not* obviously correct.
- Replaced empty parameter lists with `(void)` to avoid passing
parameters to it. Empty parameter lists are old style declarations for
unknown number and type of arguments.
- Commented out (as `#if DHT_HARDENING` block) the hardening code that
was never executed.
- Minor style fix: don't use `default` in enum-switches unless the number
of enumerators in the default case is very large. In this case, it was
2, so we want to list them both explicitly to be warned about missing
one if we add one in the future.
- Removed the only two function declarations from nTox.h and put them
into nTox.c. They are not used outside and nTox is not a library.
|
|
Messenger is slightly twisty when it comes to sending connection status
callbacks It will very likely need at the very least a partial refactor to
clean it up a bit. Toxcore shouldn't need void *userdata as deep as is
currently does.
(amend 1) Because of the nature of toxcore connection callbacks, I decided to
change this commit from statelessness for connections changes to statelessness
for friend requests. It's simpler this was and doesn't include doing anything
foolish in the time between commits.
group fixup because grayhatter doesn't want to do it
"arguably correct" is not how you write security sensitive code
Clear a compiler warning about types within a function.
|
|
A race condition that happens on machines with heavily used network interfaces
causes tests to fail. Packets sent don't arrive on time. This sleep gives it 100
extra milliseconds. The real fix would be to wait for the event to occur and
then continue, but with a "once-loop" that is tox_iterate, it's not feasible at
this time.
|
|
http://llvm.org/docs/CodingStandards.html#use-early-exits-and-continue-to-simplify-code
|
|
|
|
|
|
**What are we doing?**
We are moving towards stateless callbacks. This means that when registering a
callback, you no longer pass a user data pointer. Instead, you pass a user data
pointer to tox_iterate. This pointer is threaded through the code, passed to
each callback. The callback can modify the data pointed at. An extra indirection
will be needed if the pointer itself can change.
**Why?**
Currently, callbacks are registered with a user data pointer. This means the
library has N pointers for N different callbacks. These pointers need to be
managed by the client code. Managing the lifetime of the pointee can be
difficult. In C++, it takes special effort to ensure that the lifetime of user
data extends at least beyond the lifetime of the Tox instance. For other
languages, the situation is much worse. Java and other garbage collected
languages may move objects in memory, so the pointers are not stable. Tox4j goes
through a lot of effort to make the Java/Scala user experience a pleasant one by
keeping a global array of Tox+userdata on the C++ side, and communicating via
protobufs. A Haskell FFI would have to do similarly complex tricks.
Stateless callbacks ensure that a user data pointer only needs to live during a
single function call. This means that the user code (or language runtime) can
move the data around at will, as long as it sets the new location in the
callback.
**How?**
We are doing this change one callback at a time. After each callback, we ensure
that everything still works as expected. This means the toxcore change will
require 15 Pull Requests.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add a way to select the type of savedata (normal savedata, load a
secret key, potentially others?) to load.
|
|
|
|
|
|
|
|
|
|
|
|
new_api
|
|
friend_get_connection_status
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
