/* xdelta 3 - delta compression tools and library * Copyright (C) 2001, 2003, 2004, 2005, 2006, 2007. Joshua P. MacDonald * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* To know more about Xdelta, start by reading xdelta3.c. If you are * ready to use the API, continue reading here. There are two * interfaces -- xd3_encode_input and xd3_decode_input -- plus a dozen * or so related calls. This interface is styled after Zlib. */ #ifndef _XDELTA3_H_ #define _XDELTA3_H_ #include #include #include #include /****************************************************************/ /* Default configured value of stream->winsize. If the program * supplies xd3_encode_input() with data smaller than winsize the * stream will automatically buffer the input, otherwise the input * buffer is used directly. */ #ifndef XD3_DEFAULT_WINSIZE #define XD3_DEFAULT_WINSIZE (1U << 23) #endif /* Default total size of the source window used in xdelta3-main.h */ #ifndef XD3_DEFAULT_SRCWINSZ #define XD3_DEFAULT_SRCWINSZ (1U << 26) #endif /* When Xdelta requests a memory allocation for certain buffers, it * rounds up to units of at least this size. The code assumes (and * asserts) that this is a power-of-two. */ #ifndef XD3_ALLOCSIZE #define XD3_ALLOCSIZE (1U<<14) #endif /* The XD3_HARDMAXWINSIZE parameter is a safety mechanism to protect * decoders against malicious files. The decoder will never decode a * window larger than this. If the file specifies VCD_TARGET the * decoder may require two buffers of this size. * * 8-16MB is reasonable, probably don't need to go larger. */ #ifndef XD3_HARDMAXWINSIZE #define XD3_HARDMAXWINSIZE (1U<<24) #endif /* The IOPT_SIZE value sets the size of a buffer used to batch * overlapping copy instructions before they are optimized by picking * the best non-overlapping ranges. The larger this buffer, the * longer a forced xd3_srcwin_setup() decision is held off. Setting * this value to 0 causes an unlimited buffer to be used. */ #ifndef XD3_DEFAULT_IOPT_SIZE #define XD3_DEFAULT_IOPT_SIZE (1U<<15) #endif /* The maximum distance backward to search for small matches */ #ifndef XD3_DEFAULT_SPREVSZ #define XD3_DEFAULT_SPREVSZ (1U<<18) #endif /* The default compression level */ #ifndef XD3_DEFAULT_LEVEL #define XD3_DEFAULT_LEVEL 3 #endif #ifndef XD3_DEFAULT_SECONDARY_LEVEL #define XD3_DEFAULT_SECONDARY_LEVEL 6 #endif #ifndef XD3_USE_LARGEFILE64 #define XD3_USE_LARGEFILE64 1 #endif /* Sizes and addresses within VCDIFF windows are represented as usize_t * * For source-file offsets and total file sizes, total input and * output counts, the xoff_t type is used. The decoder and encoder * generally check for overflow of the xoff_t size (this is tested at * the 32bit boundary [xdelta3-test.h]). */ #ifndef _WIN32 #include typedef unsigned int usize_t; #else #define WIN32_LEAN_AND_MEAN #if XD3_USE_LARGEFILE64 /* 64 bit file offsets: uses GetFileSizeEx and SetFilePointerEx. * requires Win2000 or newer version of WinNT */ #define WINVER 0x0500 #define _WIN32_WINNT 0x0500 #else /* 32 bit (DWORD) file offsets: uses GetFileSize and * SetFilePointer. compatible with win9x-me and WinNT4 */ #define WINVER 0x0400 #define _WIN32_WINNT 0x0400 #endif #include typedef unsigned int usize_t; #ifdef _MSC_VER #define inline typedef signed int ssize_t; typedef unsigned char uint8_t; typedef unsigned short uint16_t; typedef unsigned long uint32_t; typedef ULONGLONG uint64_t; #else /* mingw32, lcc and watcom provide a proper header */ #include #endif #endif /* TODO: note that SIZEOF_USIZE_T is never set to 8, although it should be for * a 64bit platform. OTOH, may be that using 32bits is appropriate even on a * 64bit platform because we allocate large arrays of these values. */ #if XD3_USE_LARGEFILE64 #define __USE_FILE_OFFSET64 1 /* GLIBC: for 64bit fileops, ... ? */ typedef uint64_t xoff_t; #define SIZEOF_XOFF_T 8 #define SIZEOF_USIZE_T 4 #ifndef WIN32 #define Q "ll" #else #define Q "I64" #endif #else typedef uint32_t xoff_t; #define SIZEOF_XOFF_T 4 #define SIZEOF_USIZE_T 4 #define Q #endif #define USE_UINT32 (SIZEOF_USIZE_T == 4 || \ SIZEOF_XOFF_T == 4 || REGRESSION_TEST) #define USE_UINT64 (SIZEOF_USIZE_T == 8 || \ SIZEOF_XOFF_T == 8 || REGRESSION_TEST) /* TODO: probably should do something better here. */ #ifndef UNALIGNED_OK #if defined(__i386__) || defined(__i486__) || defined(__i586__) || \ defined(__i686__) || defined(_X86_) || defined(__x86_64__) #define UNALIGNED_OK 1 #else #define UNALIGNED_OK 0 #endif #endif /**********************************************************************/ /* Whether to build the encoder, otherwise only build the decoder. */ #ifndef XD3_ENCODER #define XD3_ENCODER 1 #endif /* The code returned when main() fails, also defined in system includes. */ #ifndef EXIT_FAILURE #define EXIT_FAILURE 1 #endif /* REGRESSION TEST enables the "xdelta3 test" command, which runs a series of self-tests. */ #ifndef REGRESSION_TEST #define REGRESSION_TEST 0 #endif /* XD3_DEBUG=1 enables assertions and various statistics. Levels > 1 * enable some additional output only useful during development and * debugging. */ #ifndef XD3_DEBUG #define XD3_DEBUG 0 #endif #ifndef PYTHON_MODULE #define PYTHON_MODULE 0 #endif #ifndef SWIG_MODULE #define SWIG_MODULE 0 #endif /* There are three string matching functions supplied: one fast, one * slow (default), and one soft-configurable. To disable any of * these, use the following definitions. */ #ifndef XD3_BUILD_SLOW #define XD3_BUILD_SLOW 1 #endif #ifndef XD3_BUILD_FAST #define XD3_BUILD_FAST 1 #endif #ifndef XD3_BUILD_FASTER #define XD3_BUILD_FASTER 1 #endif #ifndef XD3_BUILD_FASTEST #define XD3_BUILD_FASTEST 1 #endif #ifndef XD3_BUILD_SOFT #define XD3_BUILD_SOFT 1 #endif #ifndef XD3_BUILD_DEFAULT #define XD3_BUILD_DEFAULT 1 #endif #if XD3_DEBUG #include #endif /* XPRINT. Debug output and VCDIFF_TOOLS functions report to stderr. * I have used an irregular style to abbreviate [fprintf(stderr, "] as * [DP(RINT "]. */ #define DP fprintf #define RINT stderr, typedef struct _xd3_stream xd3_stream; typedef struct _xd3_source xd3_source; typedef struct _xd3_hash_cfg xd3_hash_cfg; typedef struct _xd3_smatcher xd3_smatcher; typedef struct _xd3_rinst xd3_rinst; typedef struct _xd3_dinst xd3_dinst; typedef struct _xd3_hinst xd3_hinst; typedef struct _xd3_winst xd3_winst; typedef struct _xd3_rpage xd3_rpage; typedef struct _xd3_addr_cache xd3_addr_cache; typedef struct _xd3_output xd3_output; typedef struct _xd3_desect xd3_desect; typedef struct _xd3_iopt_buflist xd3_iopt_buflist; typedef struct _xd3_rlist xd3_rlist; typedef struct _xd3_sec_type xd3_sec_type; typedef struct _xd3_sec_cfg xd3_sec_cfg; typedef struct _xd3_sec_stream xd3_sec_stream; typedef struct _xd3_config xd3_config; typedef struct _xd3_code_table_desc xd3_code_table_desc; typedef struct _xd3_code_table_sizes xd3_code_table_sizes; typedef struct _xd3_slist xd3_slist; typedef struct _xd3_whole_state xd3_whole_state; typedef struct _xd3_wininfo xd3_wininfo; /* The stream configuration has three callbacks functions, all of * which may be supplied with NULL values. If config->getblk is * provided as NULL, the stream returns XD3_GETSRCBLK. */ typedef void* (xd3_alloc_func) (void *opaque, usize_t items, usize_t size); typedef void (xd3_free_func) (void *opaque, void *address); typedef int (xd3_getblk_func) (xd3_stream *stream, xd3_source *source, xoff_t blkno); /* These are internal functions to delay construction of encoding * tables and support alternate code tables. See the comments & code * enabled by GENERIC_ENCODE_TABLES. */ typedef const xd3_dinst* (xd3_code_table_func) (void); typedef int (xd3_comp_table_func) (xd3_stream *stream, const uint8_t **data, usize_t *size); #if XD3_DEBUG #define XD3_ASSERT(x) \ do { if (! (x)) { DP(RINT "%s:%d: XD3 assertion failed: %s\n", __FILE__, __LINE__, #x); \ abort (); } } while (0) #else #define XD3_ASSERT(x) (void)0 #endif /* XD3_DEBUG */ #ifdef __GNUC__ #ifndef max #define max(x,y) ({ \ const typeof(x) _x = (x); \ const typeof(y) _y = (y); \ (void) (&_x == &_y); \ _x > _y ? _x : _y; }) #endif /* __GNUC__ */ #ifndef min #define min(x,y) ({ \ const typeof(x) _x = (x); \ const typeof(y) _y = (y); \ (void) (&_x == &_y); \ _x < _y ? _x : _y; }) #endif #else /* __GNUC__ */ #ifndef max #define max(x,y) ((x) < (y) ? (y) : (x)) #endif #ifndef min #define min(x,y) ((x) < (y) ? (x) : (y)) #endif #endif /* __GNUC__ */ /**************************************************************** PUBLIC ENUMS ******************************************************************/ /* These are the five ordinary status codes returned by the * xd3_encode_input() and xd3_decode_input() state machines. */ typedef enum { /* An application must be prepared to handle these five return * values from either xd3_encode_input or xd3_decode_input, except * in the case of no-source compression, in which case XD3_GETSRCBLK * is never returned. More detailed comments for these are given in * xd3_encode_input and xd3_decode_input comments, below. */ XD3_INPUT = -17703, /* need input */ XD3_OUTPUT = -17704, /* have output */ XD3_GETSRCBLK = -17705, /* need a block of source input (with no * xd3_getblk function), a chance to do * non-blocking read. */ XD3_GOTHEADER = -17706, /* (decode-only) after the initial VCDIFF & first window header */ XD3_WINSTART = -17707, /* notification: returned before a window is * processed, giving a chance to * XD3_SKIP_WINDOW or not XD3_SKIP_EMIT that * window. */ XD3_WINFINISH = -17708, /* notification: returned after encode/decode & output for a window */ XD3_TOOFARBACK = -17709, /* (encoder only) may be returned by getblk() if the block is too old */ XD3_INTERNAL = -17710, /* internal error */ XD3_INVALID = -17711, /* invalid config */ XD3_INVALID_INPUT = -17712, /* invalid input/decoder error */ XD3_NOSECOND = -17713, /* when secondary compression finds no improvement. */ } xd3_rvalues; /* special values in config->flags */ typedef enum { XD3_JUST_HDR = (1 << 1), /* used by VCDIFF tools, see xdelta3-main.h. */ XD3_SKIP_WINDOW = (1 << 2), /* used by VCDIFF tools, see xdelta3-main.h. */ XD3_SKIP_EMIT = (1 << 3), /* used by VCDIFF tools, see xdelta3-main.h. */ XD3_FLUSH = (1 << 4), /* flush the stream buffer to prepare for xd3_stream_close(). */ XD3_SEC_DJW = (1 << 5), /* use DJW static huffman */ XD3_SEC_FGK = (1 << 6), /* use FGK adaptive huffman */ XD3_SEC_TYPE = (XD3_SEC_DJW | XD3_SEC_FGK), XD3_SEC_NODATA = (1 << 7), /* disable secondary compression of the data section. */ XD3_SEC_NOINST = (1 << 8), /* disable secondary compression of the inst section. */ XD3_SEC_NOADDR = (1 << 9), /* disable secondary compression of the addr section. */ XD3_SEC_NOALL = (XD3_SEC_NODATA | XD3_SEC_NOINST | XD3_SEC_NOADDR), XD3_ADLER32 = (1 << 10), /* enable checksum computation in the encoder. */ XD3_ADLER32_NOVER = (1 << 11), /* disable checksum verification in the decoder. */ XD3_ALT_CODE_TABLE = (1 << 12), /* for testing th e alternate code table encoding. */ XD3_NOCOMPRESS = (1 << 13), /* disable ordinary data * compression feature, only search * the source, not the target. */ XD3_BEGREEDY = (1 << 14), /* disable the "1.5-pass * algorithm", instead use greedy * matching. Greedy is off by * default. */ XD3_ADLER32_RECODE = (1 << 15), /* used by "recode". */ /* 4 bits to set the compression level the same as the command-line * setting -1 through -9 (-0 corresponds to the XD3_NOCOMPRESS flag, * and is independent of compression level). This is for * convenience, especially with xd3_encode_memory(). */ XD3_COMPLEVEL_SHIFT = 20, /* 20 - 24 */ XD3_COMPLEVEL_MASK = (0xF << XD3_COMPLEVEL_SHIFT), XD3_COMPLEVEL_1 = (1 << XD3_COMPLEVEL_SHIFT), XD3_COMPLEVEL_2 = (2 << XD3_COMPLEVEL_SHIFT), XD3_COMPLEVEL_3 = (3 << XD3_COMPLEVEL_SHIFT), XD3_COMPLEVEL_6 = (6 << XD3_COMPLEVEL_SHIFT), XD3_COMPLEVEL_9 = (9 << XD3_COMPLEVEL_SHIFT), } xd3_flags; /* The values of this enumeration are set in xd3_config using the * smatch_cfg variable. It can be set to default, slow, fast, etc., * and soft. */ typedef enum { XD3_SMATCH_DEFAULT = 0, /* Flags may contain XD3_COMPLEVEL bits, else default. */ XD3_SMATCH_SLOW = 1, XD3_SMATCH_FAST = 2, XD3_SMATCH_FASTER = 3, XD3_SMATCH_FASTEST = 4, XD3_SMATCH_SOFT = 5, } xd3_smatch_cfg; /********************************************************************* PRIVATE ENUMS **********************************************************************/ /* stream->match_state is part of the xd3_encode_input state machine * for source matching: * * 1. the XD3_GETSRCBLK block-read mechanism means reentrant matching * 2. this state spans encoder windows: a match and end-of-window * will continue in the next 3. the initial target byte and source * byte are a presumed match, to avoid some computation in case the * inputs are identical. */ typedef enum { MATCH_TARGET = 0, /* in this state, attempt to match the start of * the target with the previously set source * address (initially 0). */ MATCH_BACKWARD = 1, /* currently expanding a match backward in the source/target. */ MATCH_FORWARD = 2, /* currently expanding a match forward in the source/target. */ MATCH_SEARCHING = 3, /* currently searching for a match. */ } xd3_match_state; /* The xd3_encode_input state machine steps through these states in * the following order. The matcher is reentrant and returns * XD3_INPUT whenever it requires more data. After receiving * XD3_INPUT, if the application reads EOF it should call * xd3_stream_close(). */ typedef enum { ENC_INIT = 0, /* xd3_encode_input has never been called. */ ENC_INPUT = 1, /* waiting for xd3_avail_input () to be called. */ ENC_SEARCH = 2, /* currently searching for matches. */ ENC_INSTR = 3, /* currently formatting output. */ ENC_FLUSH = 4, /* currently emitting output. */ ENC_POSTOUT = 5, /* after an output section. */ ENC_POSTWIN = 6, /* after all output sections. */ ENC_ABORTED = 7, /* abort. */ } xd3_encode_state; /* The xd3_decode_input state machine steps through these states in * the following order. The matcher is reentrant and returns * XD3_INPUT whenever it requires more data. After receiving * XD3_INPUT, if the application reads EOF it should call * xd3_stream_close(). * * 0-8: the VCDIFF header * 9-18: the VCDIFF window header * 19-21: the three primary sections: data, inst, addr * 22: producing output: returns XD3_OUTPUT, possibly XD3_GETSRCBLK, * 23: return XD3_WINFINISH, set state=9 to decode more input */ typedef enum { DEC_VCHEAD = 0, /* VCDIFF header */ DEC_HDRIND = 1, /* header indicator */ DEC_SECONDID = 2, /* secondary compressor ID */ DEC_TABLEN = 3, /* code table length */ DEC_NEAR = 4, /* code table near */ DEC_SAME = 5, /* code table same */ DEC_TABDAT = 6, /* code table data */ DEC_APPLEN = 7, /* application data length */ DEC_APPDAT = 8, /* application data */ DEC_WININD = 9, /* window indicator */ DEC_CPYLEN = 10, /* copy window length */ DEC_CPYOFF = 11, /* copy window offset */ DEC_ENCLEN = 12, /* length of delta encoding */ DEC_TGTLEN = 13, /* length of target window */ DEC_DELIND = 14, /* delta indicator */ DEC_DATALEN = 15, /* length of ADD+RUN data */ DEC_INSTLEN = 16, /* length of instruction data */ DEC_ADDRLEN = 17, /* length of address data */ DEC_CKSUM = 18, /* window checksum */ DEC_DATA = 19, /* data section */ DEC_INST = 20, /* instruction section */ DEC_ADDR = 21, /* address section */ DEC_EMIT = 22, /* producing data */ DEC_FINISH = 23, /* window finished */ DEC_ABORTED = 24, /* xd3_abort_stream */ } xd3_decode_state; /************************************************************ internal types ************************************************************/ /* instruction lists used in the IOPT buffer */ struct _xd3_rlist { xd3_rlist *next; xd3_rlist *prev; }; /* the raw encoding of an instruction used in the IOPT buffer */ struct _xd3_rinst { uint8_t type; uint8_t xtra; uint8_t code1; uint8_t code2; usize_t pos; usize_t size; xoff_t addr; xd3_rlist link; }; /* the code-table form of an single- or double-instruction */ struct _xd3_dinst { uint8_t type1; uint8_t size1; uint8_t type2; uint8_t size2; }; /* the decoded form of a single (half) instruction. */ struct _xd3_hinst { uint8_t type; uint32_t size; /* TODO: why decode breaks if this is usize_t? */ uint32_t addr; /* TODO: why decode breaks if this is usize_t? */ }; /* the form of a whole-file instruction */ struct _xd3_winst { uint8_t type; /* RUN, ADD, COPY */ uint8_t mode; /* 0, VCD_SOURCE, VCD_TARGET */ usize_t size; xoff_t addr; xoff_t position; /* absolute position of this inst */ }; /* used by the encoder to buffer output in sections. list of blocks. */ struct _xd3_output { uint8_t *base; usize_t next; usize_t avail; xd3_output *next_page; }; /* used by the decoder to buffer input in sections. */ struct _xd3_desect { const uint8_t *buf; const uint8_t *buf_max; uint32_t size; /* TODO: why decode breaks if this is usize_t? */ usize_t pos; /* used in xdelta3-decode.h */ uint8_t *copied1; usize_t alloc1; /* used in xdelta3-second.h */ uint8_t *copied2; usize_t alloc2; }; /* the VCDIFF address cache, see the RFC */ struct _xd3_addr_cache { usize_t s_near; usize_t s_same; usize_t next_slot; /* the circular index for near */ usize_t *near_array; /* array of size s_near */ usize_t *same_array; /* array of size s_same*256 */ }; /* the IOPT buffer list is just a list of buffers, which may be allocated * during encode when using an unlimited buffer. */ struct _xd3_iopt_buflist { xd3_rinst *buffer; xd3_iopt_buflist *next; }; /* This is the record of a pre-compiled configuration, a subset of xd3_config. */ struct _xd3_smatcher { const char *name; int (*string_match) (xd3_stream *stream); usize_t large_look; usize_t large_step; usize_t small_look; usize_t small_chain; usize_t small_lchain; usize_t max_lazy; usize_t long_enough; }; /* hash table size & power-of-two hash function. */ struct _xd3_hash_cfg { usize_t size; usize_t shift; usize_t mask; }; /* the sprev list */ struct _xd3_slist { usize_t last_pos; }; /* window info (for whole state) */ struct _xd3_wininfo { xoff_t offset; usize_t length; uint32_t adler32; }; /* whole state for, e.g., merge */ struct _xd3_whole_state { usize_t addslen; uint8_t *adds; usize_t adds_alloc; usize_t instlen; xd3_winst *inst; usize_t inst_alloc; usize_t wininfolen; xd3_wininfo *wininfo; usize_t wininfo_alloc; xoff_t length; }; /******************************************************************** public types *******************************************************************/ /* Settings for the secondary compressor. */ struct _xd3_sec_cfg { int data_type; /* Which section. (set automatically) */ usize_t ngroups; /* Number of DJW Huffman groups. */ usize_t sector_size; /* Sector size. */ int inefficient; /* If true, ignore efficiency check [avoid XD3_NOSECOND]. */ }; /* This is the user-visible stream configuration. */ struct _xd3_config { usize_t winsize; /* The encoder window size. */ usize_t sprevsz; /* How far back small string matching goes */ usize_t iopt_size; /* entries in the instruction-optimizing buffer */ usize_t srcwin_maxsz; /* srcwin_size grows by a factor of 2 when no matches are found */ xd3_getblk_func *getblk; /* The three callbacks. */ xd3_alloc_func *alloc; xd3_free_func *freef; void *opaque; /* Not used. */ int flags; /* stream->flags are initialized * from xd3_config & never * modified by the library. Use * xd3_set_flags to modify flags * settings mid-stream. */ xd3_sec_cfg sec_data; /* Secondary compressor config: data */ xd3_sec_cfg sec_inst; /* Secondary compressor config: inst */ xd3_sec_cfg sec_addr; /* Secondary compressor config: addr */ xd3_smatch_cfg smatch_cfg; /* See enum: use fields below for soft config */ xd3_smatcher smatcher_soft; }; /* The primary source file object. You create one of these objects and * initialize the first four fields. This library maintains the next * 5 fields. The configured getblk implementation is responsible for * setting the final 3 fields when called (and/or when XD3_GETSRCBLK * is returned). */ struct _xd3_source { /* you set */ usize_t blksize; /* block size */ const char *name; /* its name, for debug/print purposes */ void *ioh; /* opaque handle */ /* getblk sets */ xoff_t curblkno; /* current block number: client sets after getblk request */ usize_t onblk; /* number of bytes on current block: client sets, must be >= 0 and <= blksize */ const uint8_t *curblk; /* current block array: client sets after getblk request */ /* xd3 sets */ usize_t srclen; /* length of this source window */ xoff_t srcbase; /* offset of this source window in the source itself */ int shiftby; /* for power-of-two blocksizes */ int maskby; /* for power-of-two blocksizes */ xoff_t cpyoff_blocks; /* offset of dec_cpyoff in blocks */ usize_t cpyoff_blkoff; /* offset of copy window in blocks, remainder */ xoff_t getblkno; /* request block number: xd3 sets current getblk request */ xoff_t max_blkno; xoff_t frontier_blkno; usize_t onlastblk; int eof_known; }; /* The primary xd3_stream object, used for encoding and decoding. You * may access only two fields: avail_out, next_out. Use the methods * above to operate on xd3_stream. */ struct _xd3_stream { /* input state */ const uint8_t *next_in; /* next input byte */ usize_t avail_in; /* number of bytes available at next_in */ xoff_t total_in; /* how many bytes in */ /* output state */ uint8_t *next_out; /* next output byte */ usize_t avail_out; /* number of bytes available at next_out */ usize_t space_out; /* total out space */ xoff_t current_window; /* number of windows encoded/decoded */ xoff_t total_out; /* how many bytes out */ /* to indicate an error, xd3 sets */ const char *msg; /* last error message, NULL if no error */ /* source configuration */ xd3_source *src; /* source array */ /* encoder memory configuration */ usize_t winsize; /* suggested window size */ usize_t sprevsz; /* small string, previous window size (power of 2) */ usize_t sprevmask; /* small string, previous window size mask */ usize_t iopt_size; usize_t iopt_unlimited; usize_t srcwin_maxsz; /* general configuration */ xd3_getblk_func *getblk; /* set nxtblk, nxtblkno to scanblkno */ xd3_alloc_func *alloc; /* malloc function */ xd3_free_func *free; /* free function */ void* opaque; /* private data object passed to alloc, free, and getblk */ int flags; /* various options */ /* secondary compressor configuration */ xd3_sec_cfg sec_data; /* Secondary compressor config: data */ xd3_sec_cfg sec_inst; /* Secondary compressor config: inst */ xd3_sec_cfg sec_addr; /* Secondary compressor config: addr */ xd3_smatcher smatcher; usize_t *large_table; /* table of large checksums */ xd3_hash_cfg large_hash; /* large hash config */ usize_t *small_table; /* table of small checksums */ xd3_slist *small_prev; /* table of previous offsets, circular linked list */ int small_reset; /* true if small table should be reset */ xd3_hash_cfg small_hash; /* small hash config */ xd3_addr_cache acache; /* the vcdiff address cache */ xd3_encode_state enc_state; /* state of the encoder */ usize_t taroff; /* base offset of the target input */ usize_t input_position; /* current input position */ usize_t min_match; /* current minimum match length, avoids redundent matches */ usize_t unencoded_offset; /* current input, first * unencoded offset. this value * is <= the first instruction's * position in the iopt buffer, * if there is at least one * match in the buffer. */ // SRCWIN // these variables plus srcwin_maxsz above (set by config) int srcwin_decided; /* boolean: true if the srclen,srcbase have been decided. */ xoff_t srcwin_cksum_pos; /* Source checksum position */ // MATCH xd3_match_state match_state; /* encoder match state */ xoff_t match_srcpos; /* current match source position relative to srcbase */ xoff_t match_last_srcpos; /* previously attempted * srcpos, to avoid loops. */ xoff_t match_minaddr; /* smallest matching address to * set window params (reset each * window xd3_encode_reset) */ xoff_t match_maxaddr; /* largest matching address to * set window params (reset each * window xd3_encode_reset) */ usize_t match_back; /* match extends back so far */ usize_t match_maxback; /* match extends back maximum */ usize_t match_fwd; /* match extends forward so far */ usize_t match_maxfwd; /* match extends forward maximum */ xoff_t maxsrcaddr; /* address of the last source match (across windows) */ uint8_t *buf_in; /* for saving buffered input */ usize_t buf_avail; /* amount of saved input */ const uint8_t *buf_leftover; /* leftover content of next_in (i.e., user's buffer) */ usize_t buf_leftavail; /* amount of leftover content */ xd3_output *enc_current; /* current output buffer */ xd3_output *enc_free; /* free output buffers */ xd3_output *enc_heads[4]; /* array of encoded outputs: head of chain */ xd3_output *enc_tails[4]; /* array of encoded outputs: tail of chain */ uint32_t recode_adler32; /* set the adler32 checksum * during "recode". */ xd3_rlist iopt_used; /* instruction optimizing buffer */ xd3_rlist iopt_free; xd3_rinst *iout; /* next single instruction */ xd3_iopt_buflist *iopt_alloc; const uint8_t *enc_appheader; /* application header to encode */ usize_t enc_appheadsz; /* application header size */ /* decoder stuff */ xd3_decode_state dec_state; /* current DEC_XXX value */ usize_t dec_hdr_ind; /* VCDIFF header indicator */ usize_t dec_win_ind; /* VCDIFF window indicator */ usize_t dec_del_ind; /* VCDIFF delta indicator */ uint8_t dec_magic[4]; /* First four bytes */ usize_t dec_magicbytes; /* Magic position. */ usize_t dec_secondid; /* Optional secondary compressor ID. */ /* TODO: why decode breaks if this is usize_t? */ uint32_t dec_codetblsz; /* Optional code table: length. */ uint8_t *dec_codetbl; /* Optional code table: storage. */ usize_t dec_codetblbytes; /* Optional code table: position. */ /* TODO: why decode breaks if this is usize_t? */ uint32_t dec_appheadsz; /* Optional application header: size. */ uint8_t *dec_appheader; /* Optional application header: storage */ usize_t dec_appheadbytes; /* Optional application header: position. */ usize_t dec_cksumbytes; /* Optional checksum: position. */ uint8_t dec_cksum[4]; /* Optional checksum: storage. */ uint32_t dec_adler32; /* Optional checksum: value. */ /* TODO: why decode breaks if this is usize_t? */ uint32_t dec_cpylen; /* length of copy window (VCD_SOURCE or VCD_TARGET) */ xoff_t dec_cpyoff; /* offset of copy window (VCD_SOURCE or VCD_TARGET) */ /* TODO: why decode breaks if this is usize_t? */ uint32_t dec_enclen; /* length of delta encoding */ /* TODO: why decode breaks if this is usize_t? */ uint32_t dec_tgtlen; /* length of target window */ #if USE_UINT64 uint64_t dec_64part; /* part of a decoded uint64_t */ #endif #if USE_UINT32 uint32_t dec_32part; /* part of a decoded uint32_t */ #endif xoff_t dec_winstart; /* offset of the start of current target window */ xoff_t dec_window_count; /* == current_window + 1 in DEC_FINISH */ usize_t dec_winbytes; /* bytes of the three sections so far consumed */ usize_t dec_hdrsize; /* VCDIFF + app header size */ const uint8_t *dec_tgtaddrbase; /* Base of decoded target addresses (addr >= dec_cpylen). */ const uint8_t *dec_cpyaddrbase; /* Base of decoded copy addresses (addr < dec_cpylen). */ usize_t dec_position; /* current decoder position counting the cpylen offset */ usize_t dec_maxpos; /* maximum decoder position counting the cpylen offset */ xd3_hinst dec_current1; /* current instruction */ xd3_hinst dec_current2; /* current instruction */ uint8_t *dec_buffer; /* Decode buffer */ uint8_t *dec_lastwin; /* In case of VCD_TARGET, the last target window. */ usize_t dec_lastlen; /* length of the last target window */ xoff_t dec_laststart; /* offset of the start of last target window */ usize_t dec_lastspace; /* allocated space of last target window, for reuse */ xd3_desect inst_sect; /* staging area for decoding window sections */ xd3_desect addr_sect; xd3_desect data_sect; xd3_code_table_func *code_table_func; xd3_comp_table_func *comp_table_func; const xd3_dinst *code_table; const xd3_code_table_desc *code_table_desc; xd3_dinst *code_table_alloc; /* secondary compression */ const xd3_sec_type *sec_type; xd3_sec_stream *sec_stream_d; xd3_sec_stream *sec_stream_i; xd3_sec_stream *sec_stream_a; /* state for reconstructing whole files (e.g., for merge), this only * supports loading USIZE_T_MAX instructions, adds, etc. */ xd3_whole_state whole_target; /* statistics */ xoff_t n_scpy; xoff_t n_tcpy; xoff_t n_add; xoff_t n_run; xoff_t l_scpy; xoff_t l_tcpy; xoff_t l_add; xoff_t l_run; usize_t i_slots_used; #if XD3_DEBUG usize_t large_ckcnt; /* memory usage */ usize_t alloc_cnt; usize_t free_cnt; #endif }; /************************************************************************** PUBLIC FUNCTIONS **************************************************************************/ /* This function configures an xd3_stream using the provided in-memory * input buffer, source buffer, output buffer, and flags. The output * array must be large enough or else ENOSPC will be returned. This * is the simplest in-memory encoding interface. */ int xd3_encode_memory (const uint8_t *input, usize_t input_size, const uint8_t *source, usize_t source_size, uint8_t *output_buffer, usize_t *output_size, usize_t avail_output, int flags); /* The reverse of xd3_encode_memory. */ int xd3_decode_memory (const uint8_t *input, usize_t input_size, const uint8_t *source, usize_t source_size, uint8_t *output_buf, usize_t *output_size, usize_t avail_output, int flags); /* This function encodes an in-memory input. The output array must be * large enough to hold the output or else ENOSPC is returned. The * source (if any) should be set using xd3_set_source() with a * single-block xd3_source. This calls the underlying non-blocking * interface, xd3_encode_input(), handling the necessary input/output * states. This method be considered a reference for any application * using xd3_encode_input() directly. * * xd3_stream stream; * xd3_config config; * xd3_source src; * * memset (& src, 0, sizeof (src)); * memset (& stream, 0, sizeof (stream)); * memset (& config, 0, sizeof (config)); * * if (source != NULL) * { * src.size = source_size; * src.blksize = source_size; * src.curblkno = 0; * src.onblk = source_size; * src.curblk = source; * xd3_set_source(&stream, &src); * } * * config.flags = flags; * config.srcwin_maxsz = source_size; * config.winsize = input_size; * * ... set smatcher, appheader, encoding-table, compression-level, etc. * * xd3_config_stream(&stream, &config); * xd3_encode_stream(&stream, ...); * xd3_free_stream(&stream); * * DO NOT USE except for testing. These methods are allocate bad buffer sizes. */ int xd3_encode_stream (xd3_stream *stream, const uint8_t *input, usize_t input_size, uint8_t *output, usize_t *output_size, usize_t avail_output); /* The reverse of xd3_encode_stream. */ int xd3_decode_stream (xd3_stream *stream, const uint8_t *input, usize_t input_size, uint8_t *output, usize_t *output_size, usize_t avail_size); /* This is the non-blocking interface. * * Handling input and output states is the same for encoding or * decoding using the xd3_avail_input() and xd3_consume_output() * routines, inlined below. * * Return values: * * XD3_INPUT: the process requires more input: call * xd3_avail_input() then repeat * * XD3_OUTPUT: the process has more output: read stream->next_out, * stream->avail_out, then call xd3_consume_output(), * then repeat * * XD3_GOTHEADER: (decoder-only) notification returned following the * VCDIFF header and first window header. the decoder * may use the header to configure itself. * * XD3_WINSTART: a general notification returned once for each * window except the 0-th window, which is implied by * XD3_GOTHEADER. It is recommended to use a * switch-stmt such as: * * ... * again: * switch ((ret = xd3_decode_input (stream))) { * case XD3_GOTHEADER: { * assert(stream->current_window == 0); * stuff; * } * // fallthrough * case XD3_WINSTART: { * something(stream->current_window); * goto again; * } * ... * * XD3_WINFINISH: a general notification, following the complete * input & output of a window. at this point, * stream->total_in and stream->total_out are consistent * for either encoding or decoding. * * XD3_GETSRCBLK: If the xd3_getblk() callback is NULL, this value * is returned to initiate a non-blocking source read. */ int xd3_decode_input (xd3_stream *stream); int xd3_encode_input (xd3_stream *stream); /* The xd3_config structure is used to initialize a stream - all data * is copied into stream so config may be a temporary variable. See * the [documentation] or comments on the xd3_config structure. */ int xd3_config_stream (xd3_stream *stream, xd3_config *config); /* Since Xdelta3 doesn't open any files, xd3_close_stream is just an * error check that the stream is in a proper state to be closed: this * means the encoder is flushed and the decoder is at a window * boundary. The application is responsible for freeing any of the * resources it supplied. */ int xd3_close_stream (xd3_stream *stream); /* This arranges for closes the stream to succeed. Does not free the * stream.*/ void xd3_abort_stream (xd3_stream *stream); /* xd3_free_stream frees all memory allocated for the stream. The * application is responsible for freeing any of the resources it * supplied. */ void xd3_free_stream (xd3_stream *stream); /* This function informs the encoder or decoder that source matching * (i.e., delta-compression) is possible. For encoding, this should * be called before the first xd3_encode_input. A NULL source is * ignored. For decoding, this should be called before the first * window is decoded, but the appheader may be read first * (XD3_GOTHEADER). After decoding the header, call xd3_set_source() * if you have a source file. Note: if (stream->dec_win_ind & VCD_SOURCE) * is true, it means the first window expects there to be a source file. */ int xd3_set_source (xd3_stream *stream, xd3_source *source); /* If the source size is known, call this instead of xd3_set_source(). * to avoid having stream->getblk called (and/or to avoid XD3_GETSRCBLK). * * Follow these steps: xd3_source source; memset(&source, 0, sizeof(source)); source.blksize = size; source.onblk = size; source.curblk = buf; source.curblkno = 0; int ret = xd3_set_source_and_size(&stream, &source, size); ... */ int xd3_set_source_and_size (xd3_stream *stream, xd3_source *source, xoff_t source_size); /* This should be called before the first call to xd3_encode_input() * to include application-specific data in the VCDIFF header. */ void xd3_set_appheader (xd3_stream *stream, const uint8_t *data, usize_t size); /* xd3_get_appheader may be called in the decoder after XD3_GOTHEADER. * For convenience, the decoder always adds a single byte padding to * the end of the application header, which is set to zero in case the * application header is a string. */ int xd3_get_appheader (xd3_stream *stream, uint8_t **data, usize_t *size); /* To generate a VCDIFF encoded delta with xd3_encode_init() from * another format, use: * * xd3_encode_init_partial() -- initialze encoder state (w/o hash tables) * xd3_init_cache() -- reset VCDIFF address cache * xd3_found_match() -- to report a copy instruction * * set stream->enc_state to ENC_INSTR and call xd3_encode_input as usual. */ int xd3_encode_init_partial (xd3_stream *stream); void xd3_init_cache (xd3_addr_cache* acache); int xd3_found_match (xd3_stream *stream, usize_t pos, usize_t size, xoff_t addr, int is_source); /* Gives an error string for xdelta3-speficic errors, returns NULL for system errors */ const char* xd3_strerror (int ret); /* For convenience, zero & initialize the xd3_config structure with specified flags. */ static inline void xd3_init_config (xd3_config *config, int flags) { memset (config, 0, sizeof (*config)); config->flags = flags; } /* This supplies some input to the stream. * * For encoding, if the input is larger than the configured window * size (xd3_config.winsize), the entire input will be consumed and * encoded anyway. If you wish to strictly limit the window size, * limit the buffer passed to xd3_avail_input to the window size. * * For encoding, if the input is smaller than the configured window * size (xd3_config.winsize), the library will create a window-sized * buffer and accumulate input until a full-sized window can be * encoded. XD3_INPUT will be returned. The input must remain valid * until the next time xd3_encode_input() returns XD3_INPUT. * * For decoding, the input will be consumed entirely before XD3_INPUT * is returned again. */ static inline void xd3_avail_input (xd3_stream *stream, const uint8_t *idata, usize_t isize) { /* Even if isize is zero, the code expects a non-NULL idata. Why? * It uses this value to determine whether xd3_avail_input has ever * been called. If xd3_encode_input is called before * xd3_avail_input it will return XD3_INPUT right away without * allocating a stream->winsize buffer. This is to avoid an * unwanted allocation. */ XD3_ASSERT (idata != NULL || isize == 0); stream->next_in = idata; stream->avail_in = isize; } /* This acknowledges receipt of output data, must be called after any * XD3_OUTPUT return. */ static inline void xd3_consume_output (xd3_stream *stream) { stream->avail_out = 0; } /* These are set for each XD3_WINFINISH return. */ static inline int xd3_encoder_used_source (xd3_stream *stream) { return stream->src != NULL && stream->src->srclen > 0; } static inline xoff_t xd3_encoder_srcbase (xd3_stream *stream) { return stream->src->srcbase; } static inline usize_t xd3_encoder_srclen (xd3_stream *stream) { return stream->src->srclen; } /* Checks for legal flag changes. */ static inline void xd3_set_flags (xd3_stream *stream, int flags) { /* The bitwise difference should contain only XD3_FLUSH or XD3_SKIP_WINDOW */ XD3_ASSERT(((flags ^ stream->flags) & ~(XD3_FLUSH | XD3_SKIP_WINDOW)) == 0); stream->flags = flags; } /* Gives some extra information about the latest library error, if any is known. */ static inline const char* xd3_errstring (xd3_stream *stream) { return stream->msg ? stream->msg : ""; } /* 64-bit divisions are expensive. on a 32bit platform, these show in * a profile as __udivdi3(). these are all the xoff_t divisions: */ static inline void xd3_blksize_div (const xoff_t offset, const xd3_source *source, xoff_t *blkno, usize_t *blkoff) { *blkno = source->maskby ? (offset >> source->shiftby) : (offset / source->blksize); *blkoff = source->maskby ? (offset & source->maskby) : (offset - *blkno * source->blksize); } #endif /* _XDELTA3_H_ */