From 862c489cd21c224c7934ba1cd6f9f2dc94395c9d Mon Sep 17 00:00:00 2001 From: Steven Date: Thu, 30 Sep 2021 13:00:09 -0400 Subject: Makefile from https://github.com/digiampietro/arduino-makefile/tree/master/blink-wemos-ota --- src/main/Makefile | 166 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 166 insertions(+) create mode 100644 src/main/Makefile diff --git a/src/main/Makefile b/src/main/Makefile new file mode 100644 index 0000000..cd0b8f9 --- /dev/null +++ b/src/main/Makefile @@ -0,0 +1,166 @@ +# Makefile for Arduino based scketches +# +# Copyright 2020 Valerio Di Giampietro http://va.ler.io v@ler.io +# MIT License - see License.txt file +# +# This Makefile uses the arduino-cli, the Arduino command line interface +# and has been designed and tested to run on Linux, not on Windows. +# Probably it will run on a Mac, but it has not been tested. +# +# Please note that: +# +# 1. each sketch must reside in his own folder with this Makefile +# +# 2. the main make targets are: +# - all compiles and upload +# - compile compiles only +# - upload upload via serial port, compile if the binary file is +# not available +# - ota upload Over The Air, automatically find the device +# IP address using the IOT_NAME (device hostname) +# - clean clean the build directory +# - find find OTA updatable devices on the local subnet +# - requirements it the file "requirements.txt" exists it will +# install the libraries listed in this file +# +# default is "all" +# +# 3. it gets the name of the sketch using the wildcard make command; +# the name is *.ino; this means that you must have ONLY a file +# with .ino extension, otherwise this makefile will break. This +# also means that you can use this Makefile, almost unmodified, +# for any sketch as long as you keep a single .ino file in each +# folder +# +# 4. you can split your project in multiple files, if you wish, +# using a single .ino file and multiple .h files, that you can +# include in the .ino file with an '#include "myfile.h"' +# directive +# +# Optionally some environment variables can be set: +# +# FQBN Fully Qualified Board Name; if not set in the environment +# it will be assigned a value in this makefile +# +# SERIAL_DEV Serial device to upload the sketch; if not set in the +# environment it will be assigned: +# /dev/ttyUSB0 if it exists, or +# /dev/ttyACM0 if it exists, or +# unknown +# +# IOT_NAME Name of the IOT device; if not set in the environment +# it will be assigned a value in this makefile. This is +# very useful for OTA update, the device will be searched +# on the local subnet using this name +# +# OTA_PORT Port used by OTA update; if not set in the environment +# it will be assigned the default value of 8266 in this +# makefile +# +# OTA_PASS Password used for OTA update; if not set in the environment +# it will be assigned the default value of an empty string +# +# V verbose flag; can be 0 (quiet) or 1 (verbose); if not set +# in the environment it will be assigned a default value +# in this makefile + + +MAKE_DIR := $(PWD) +# +# ----- setup wor Wemos D1 mini ----- +FQBN ?= esp8266:esp8266:d1_mini +IOT_NAME ?= esp8266-blink +OTA_PORT ?= 8266 +OTA_PASS ?= +# ----- setup for Arduino Uno +#FQBN ?= arduino:avr:uno +# ----- --------------------- +V ?= 0 +VFLAG = + +ifeq "$(V)" "1" +VFLAG =-v +endif + +ifndef SERIAL_DEV + ifneq (,$(wildcard /dev/ttyUSB0)) + SERIAL_DEV = /dev/ttyUSB0 + else ifneq (,$(wildcard /dev/ttyACM0)) + SERIAL_DEV = /dev/ttyACM0 + else + SERIAL_DEV = unknown + endif +endif + +BUILD_DIR := $(subst :,.,build/$(FQBN)) + +SRC := $(wildcard *.ino) +HDRS := $(wildcard *.h) +BIN := $(BUILD_DIR)/$(SRC).bin +ELF := $(BUILD_DIR)/$(SRC).elf + +$(info FQBN is [${FQBN}]) +$(info IOT_NAME is [${IOT_NAME}]) +$(info OTA_PORT is [${OTA_PORT}]) +$(info OTA_PASS is [${OTA_PASS}]) +$(info V is [${V}]) +$(info VFLAG is [${VFLAG}]) +$(info MAKE_DIR is [${MAKE_DIR}]) +$(info BUILD_DIR is [${BUILD_DIR}]) +$(info SRC is [${SRC}]) +$(info HDRS is [${HDRS}]) +$(info BIN is [${BIN}]) +$(info SERIAL_DEV is [${SERIAL_DEV}]) + +all: $(ELF) upload +.PHONY: all + +compile: $(ELF) +.PHONY: compile + +$(ELF): $(SRC) $(HDRS) + arduino-cli compile -b $(FQBN) $(VFLAG) + @if which arduino-manifest.pl; \ + then echo "---> Generating manifest.txt"; \ + arduino-manifest.pl -b $(FQBN) $(SRC) $(HDRS) > manifest.txt; \ + else echo "---> If you want to generate manifest.txt, listing used libraries and their versions,"; \ + echo "---> please install arduino-manifest, see https://github.com/digiampietro/arduino-manifest"; \ + fi + +upload: + @if [ ! -c $(SERIAL_DEV) ] ; \ + then echo "---> ERROR: Serial Device not available, please set the SERIAL_DEV environment variable" ; \ + else echo "---> Uploading sketch\n"; \ + arduino-cli upload -b $(FQBN) -p $(SERIAL_DEV) $(VFLAG); \ + fi + +ota: + @PLAT_PATH=`arduino-cli compile -b $(FQBN) --show-properties | grep '^runtime.platform.path' | awk -F= '{print $$2}'` ; \ + PY_PATH=`arduino-cli compile -b $(FQBN) --show-properties | grep '^runtime.tools.python3.path' | awk -F= '{print $$2}'` ; \ + IOT_IP=`avahi-browse _arduino._tcp --resolve --parsable --terminate|grep -i ';$(IOT_NAME);'|grep ';$(OTA_PORT);'| awk -F\; '{print $$8}'|head -1`; \ + BINFILE=$(wildcard $(BUILD_DIR)/$(SRC)*bin); \ + echo "PLAT_PATH is [$$PLAT_PATH]" ; \ + echo "PY_PATH: is [$$PY_PATH]" ; \ + echo "IOT_IP: is [$$IOT_IP]" ; \ + echo "BINFILE: is [$$BINFILE]" ; \ + if [ "$$IOT_IP" = "" ] ; \ + then echo "Unable to find device IP. Check that the IOT_NAME environment variable is correctly set. Use 'make find' to search devices"; \ + else echo "---> Uploading Over The Air"; \ + $$PY_PATH/python3 $$PLAT_PATH/tools/espota.py -i $$IOT_IP -p $(OTA_PORT) --auth=$(OTA_PASS) -f $$BINFILE ;\ + fi + +clean: + @echo "---> Cleaning the build directory" + rm -rf build + +find: + avahi-browse _arduino._tcp --resolve --parsable --terminate + +requirements: + @if [ -e requirements.txt ]; \ + then while read -r i ; do echo ; \ + echo "---> Installing " '"'$$i'"' ; \ + arduino-cli lib install "$$i" ; \ + done < requirements.txt ; \ + else echo "---> MISSING requirements.txt file"; \ + fi -- cgit v1.2.3