Import 5.2p1 tarball

1 files changed, 148 insertions, 0 deletions

diff --git a/scp.0 b/scp.0
new file mode 100644
index 000000000..26b3fc728
--- /dev/null
+++ b/scp.0
@@ -0,0 +1,148 @@
+SCP(1)                     OpenBSD Reference Manual                     SCP(1)
+
+NAME
+     scp - secure copy (remote file copy program)
+
+SYNOPSIS
+     scp [-1246BCpqrv] [-c cipher] [-F ssh_config] [-i identity_file]
+         [-l limit] [-o ssh_option] [-P port] [-S program]
+         [[user@]host1:]file1 ...  [[user@]host2:]file2
+
+DESCRIPTION
+     scp copies files between hosts on a network.  It uses ssh(1) for data
+     transfer, and uses the same authentication and provides the same security
+     as ssh(1).  Unlike rcp(1), scp will ask for passwords or passphrases if
+     they are needed for authentication.
+
+     File names may contain a user and host specification to indicate that the
+     file is to be copied to/from that host.  Local file names can be made ex-
+     plicit using absolute or relative pathnames to avoid scp treating file
+     names containing `:' as host specifiers.  Copies between two remote hosts
+     are also permitted.
+
+     The options are as follows:
+
+     -1      Forces scp to use protocol 1.
+
+     -2      Forces scp to use protocol 2.
+
+     -4      Forces scp to use IPv4 addresses only.
+
+     -6      Forces scp to use IPv6 addresses only.
+
+     -B      Selects batch mode (prevents asking for passwords or passphras-
+             es).
+
+     -C      Compression enable.  Passes the -C flag to ssh(1) to enable com-
+             pression.
+
+     -c cipher
+             Selects the cipher to use for encrypting the data transfer.  This
+             option is directly passed to ssh(1).
+
+     -F ssh_config
+             Specifies an alternative per-user configuration file for ssh.
+             This option is directly passed to ssh(1).
+
+     -i identity_file
+             Selects the file from which the identity (private key) for public
+             key authentication is read.  This option is directly passed to
+             ssh(1).
+
+     -l limit
+             Limits the used bandwidth, specified in Kbit/s.
+
+     -o ssh_option
+             Can be used to pass options to ssh in the format used in
+             ssh_config(5).  This is useful for specifying options for which
+             there is no separate scp command-line flag.  For full details of
+             the options listed below, and their possible values, see
+             ssh_config(5).
+
+                   AddressFamily
+                   BatchMode
+                   BindAddress
+                   ChallengeResponseAuthentication
+                   CheckHostIP
+                   Cipher
+                   Ciphers
+                   Compression
+                   CompressionLevel
+                   ConnectionAttempts
+                   ConnectTimeout
+                   ControlMaster
+                   ControlPath
+                   GlobalKnownHostsFile
+                   GSSAPIAuthentication
+                   GSSAPIDelegateCredentials
+                   HashKnownHosts
+                   Host
+                   HostbasedAuthentication
+                   HostKeyAlgorithms
+                   HostKeyAlias
+                   HostName
+                   IdentityFile
+                   IdentitiesOnly
+                   KbdInteractiveDevices
+                   LogLevel
+                   MACs
+                   NoHostAuthenticationForLocalhost
+                   NumberOfPasswordPrompts
+                   PasswordAuthentication
+                   Port
+                   PreferredAuthentications
+                   Protocol
+                   ProxyCommand
+                   PubkeyAuthentication
+                   RekeyLimit
+                   RhostsRSAAuthentication
+                   RSAAuthentication
+                   SendEnv
+                   ServerAliveInterval
+                   ServerAliveCountMax
+                   SmartcardDevice
+                   StrictHostKeyChecking
+                   TCPKeepAlive
+                   UsePrivilegedPort
+                   User
+                   UserKnownHostsFile
+                   VerifyHostKeyDNS
+
+     -P port
+             Specifies the port to connect to on the remote host.  Note that
+             this option is written with a capital `P', because -p is already
+             reserved for preserving the times and modes of the file in
+             rcp(1).
+
+     -p      Preserves modification times, access times, and modes from the
+             original file.
+
+     -q      Quiet mode: disables the progress meter as well as warning and
+             diagnostic messages from ssh(1).
+
+     -r      Recursively copy entire directories.  Note that scp follows sym-
+             bolic links encountered in the tree traversal.
+
+     -S program
+             Name of program to use for the encrypted connection.  The program
+             must understand ssh(1) options.
+
+     -v      Verbose mode.  Causes scp and ssh(1) to print debugging messages
+             about their progress.  This is helpful in debugging connection,
+             authentication, and configuration problems.
+
+     The scp utility exits 0 on success, and >0 if an error occurs.
+
+SEE ALSO
+     rcp(1), sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1),
+     ssh_config(5), sshd(8)
+
+HISTORY
+     scp is based on the rcp(1) program in BSD source code from the Regents of
+     the University of California.
+
+AUTHORS
+     Timo Rinne <tri@iki.fi>
+     Tatu Ylonen <ylo@cs.hut.fi>
+
+OpenBSD 4.5                      July 12, 2008                               3