Import OpenSSH 3.8p1.

1 files changed, 220 insertions, 0 deletions

diff --git a/sftp.0 b/sftp.0
new file mode 100644
index 000000000..acb400dad
--- /dev/null
+++ b/sftp.0
@@ -0,0 +1,220 @@
+SFTP(1)                    OpenBSD Reference Manual                    SFTP(1)
+
+NAME
+     sftp - secure file transfer program
+
+SYNOPSIS
+     sftp [-1Cv] [-B buffer_size] [-b batchfile] [-F ssh_config]
+          [-o ssh_option] [-P sftp_server_path] [-R num_requests] [-S program]
+          [-s subsystem | sftp_server] host
+     sftp [[user@]host[:file [file]]]
+     sftp [[user@]host[:dir[/]]]
+     sftp -b batchfile [user@]host
+
+DESCRIPTION
+     sftp is an interactive file transfer program, similar to ftp(1), which
+     performs all operations over an encrypted ssh(1) transport.  It may also
+     use many features of ssh, such as public key authentication and compres-
+     sion.  sftp connects and logs into the specified host, then enters an in-
+     teractive command mode.
+
+     The second usage format will retrieve files automatically if a non-inter-
+     active authentication method is used; otherwise it will do so after suc-
+     cessful interactive authentication.
+
+     The third usage format allows the sftp client to start in a remote direc-
+     tory.
+
+     The final usage format allows for automated sessions using the -b option.
+     In such cases, it is usually necessary to configure public key authenti-
+     cation to obviate the need to enter a password at connection time (see
+     sshd(8) and ssh-keygen(1) for details).  The options are as follows:
+
+     -1      Specify the use of protocol version 1.
+
+     -B buffer_size
+             Specify the size of the buffer that sftp uses when transferring
+             files.  Larger buffers require fewer round trips at the cost of
+             higher memory consumption.  The default is 32768 bytes.
+
+     -b batchfile
+             Batch mode reads a series of commands from an input batchfile in-
+             stead of stdin.  Since it lacks user interaction it should be
+             used in conjunction with non-interactive authentication.  A
+             batchfile of `-' may be used to indicate standard input.  sftp
+             will abort if any of the following commands fail: get, put,
+             rename, ln, rm, mkdir, chdir, ls, lchdir, chmod, chown, chgrp,
+             lpwd and lmkdir.  Termination on error can be suppressed on a
+             command by command basis by prefixing the command with a `-'
+             character (for example, -rm /tmp/blah*).
+
+     -C      Enables compression (via ssh's -C flag).
+
+     -F ssh_config
+             Specifies an alternative per-user configuration file for ssh(1).
+             This option is directly passed to ssh(1).
+
+     -o ssh_option
+             Can be used to pass options to ssh in the format used in
+             ssh_config(5).  This is useful for specifying options for which
+             there is no separate sftp command-line flag.  For example, to
+             specify an alternate port use: sftp -oPort=24.  For full details
+             of the options listed below, and their possible values, see
+             ssh_config(5).
+
+                   AddressFamily
+                   BatchMode
+                   BindAddress
+                   ChallengeResponseAuthentication
+                   CheckHostIP
+                   Cipher
+                   Ciphers
+                   Compression
+                   CompressionLevel
+                   ConnectionAttempts
+                   ConnectionTimeout
+                   GlobalKnownHostsFile
+                   GSSAPIAuthentication
+                   GSSAPIDelegateCredentials
+                   Host
+                   HostbasedAuthentication
+                   HostKeyAlgorithms
+                   HostKeyAlias
+                   HostName
+                   IdentityFile
+                   LogLevel
+                   MACs
+                   NoHostAuthenticationForLocalhost
+                   NumberOfPasswordPrompts
+                   PasswordAuthentication
+                   Port
+                   PreferredAuthentications
+                   Protocol
+                   ProxyCommand
+                   PubkeyAuthentication
+                   RhostsRSAAuthentication
+                   RSAAuthentication
+                   ServerAliveInterval
+                   ServerAliveCountMax
+                   SmartcardDevice
+                   StrictHostKeyChecking
+                   TCPKeepAlive
+                   UsePrivilegedPort
+                   User
+                   UserKnownHostsFile
+                   VerifyHostKeyDNS
+
+     -P sftp_server_path
+             Connect directly to a local sftp server (rather than via ssh(1))
+             This option may be useful in debugging the client and server.
+
+     -R num_requests
+             Specify how many requests may be outstanding at any one time.
+             Increasing this may slightly improve file transfer speed but will
+             increase memory usage.  The default is 16 outstanding requests.
+
+     -S program
+             Name of the program to use for the encrypted connection.  The
+             program must understand ssh(1) options.
+
+     -s subsystem | sftp_server
+             Specifies the SSH2 subsystem or the path for an sftp server on
+             the remote host.  A path is useful for using sftp over protocol
+             version 1, or when the remote sshd(8) does not have an sftp sub-
+             system configured.
+
+     -v      Raise logging level.  This option is also passed to ssh.
+
+INTERACTIVE COMMANDS
+     Once in interactive mode, sftp understands a set of commands similar to
+     those of ftp(1).  Commands are case insensitive and pathnames may be en-
+     closed in quotes if they contain spaces.
+
+     bye         Quit sftp.
+
+     cd path     Change remote directory to path.
+
+     chgrp grp path
+                 Change group of file path to grp.  grp must be a numeric GID.
+
+     chmod mode path
+                 Change permissions of file path to mode.
+
+     chown own path
+                 Change owner of file path to own.  own must be a numeric UID.
+
+     exit        Quit sftp.
+
+     get [flags] remote-path [local-path]
+                 Retrieve the remote-path and store it on the local machine.
+                 If the local path name is not specified, it is given the same
+                 name it has on the remote machine.  If the -P flag is speci-
+                 fied, then the file's full permission and access time are
+                 copied too.
+
+     help        Display help text.
+
+     lcd path    Change local directory to path.
+
+     lls [ls-options [path]]
+                 Display local directory listing of either path or current di-
+                 rectory if path is not specified.
+
+     lmkdir path
+                 Create local directory specified by path.
+
+     ln oldpath newpath
+                 Create a symbolic link from oldpath to newpath.
+
+     lpwd        Print local working directory.
+
+     ls [flags] [path]
+                 Display remote directory listing of either path or current
+                 directory if path is not specified.  If the -l flag is speci-
+                 fied, then display additional details including permissions
+                 and ownership information.
+
+     lumask umask
+                 Set local umask to umask.
+
+     mkdir path  Create remote directory specified by path.
+
+     progress    Toggle display of progress meter.
+
+     put [flags] local-path [remote-path]
+                 Upload local-path and store it on the remote machine.  If the
+                 remote path name is not specified, it is given the same name
+                 it has on the local machine.  If the -P flag is specified,
+                 then the file's full permission and access time are copied
+                 too.
+
+     pwd         Display remote working directory.
+
+     quit        Quit sftp.
+
+     rename oldpath newpath
+                 Rename remote file from oldpath to newpath.
+
+     rm path     Delete remote file specified by path.
+
+     rmdir path  Remove remote directory specified by path.
+
+     symlink oldpath newpath
+                 Create a symbolic link from oldpath to newpath.
+
+     version     Display the sftp protocol version.
+
+     ! command   Execute command in local shell.
+
+     !           Escape to local shell.
+
+     ?           Synonym for help.
+
+SEE ALSO
+     ftp(1), scp(1), ssh(1), ssh-add(1), ssh-keygen(1), ssh_config(5),
+     sftp-server(8), sshd(8)
+
+     T. Ylonen, and S. Lehtinen, SSH File Transfer Protocol, draft-ietf-secsh-
+     filexfer-00.txt, January 2001, work in progress material.
+
+OpenBSD 3.4                    February 4, 2001                              4