New upstream release (8.0p1)

1 files changed, 66 insertions, 45 deletions

diff --git a/ssh.c b/ssh.c
index 3140fed4c..86f143341 100644
--- a/ssh.c
+++ b/ssh.c
@@ -1,4 +1,4 @@
-/* $OpenBSD: ssh.c,v 1.494 2018/10/03 06:38:35 djm Exp $ */
+/* $OpenBSD: ssh.c,v 1.500 2019/01/19 21:43:56 djm Exp $ */
 /*
  * Author: Tatu Ylonen <ylo@cs.hut.fi>
  * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
@@ -527,7 +527,8 @@ check_load(int r, const char *path, const char *message)
  * file if the user specifies a config file on the command line.
  */
 static void
-process_config_files(const char *host_name, struct passwd *pw, int post_canon)
+process_config_files(const char *host_name, struct passwd *pw, int final_pass,
+    int *want_final_pass)
 {
         char buf[PATH_MAX];
         int r;
@@ -535,7 +536,8 @@ process_config_files(const char *host_name, struct passwd *pw, int post_canon)
         if (config != NULL) {
                 if (strcasecmp(config, "none") != 0 &&
                     !read_config_file(config, pw, host, host_name, &options,
-                    SSHCONF_USERCONF | (post_canon ? SSHCONF_POSTCANON : 0)))
+                    SSHCONF_USERCONF | (final_pass ? SSHCONF_FINAL : 0),
+                    want_final_pass))
                         fatal("Can't open user config file %.100s: "
                             "%.100s", config, strerror(errno));
         } else {
@@ -544,12 +546,12 @@ process_config_files(const char *host_name, struct passwd *pw, int post_canon)
                 if (r > 0 && (size_t)r < sizeof(buf))
                         (void)read_config_file(buf, pw, host, host_name,
                             &options, SSHCONF_CHECKPERM | SSHCONF_USERCONF |
-                            (post_canon ? SSHCONF_POSTCANON : 0));
+                            (final_pass ? SSHCONF_FINAL : 0), want_final_pass);
 
                 /* Read systemwide configuration file after user config. */
                 (void)read_config_file(_PATH_HOST_CONFIG_FILE, pw,
                     host, host_name, &options,
-                    post_canon ? SSHCONF_POSTCANON : 0);
+                    final_pass ? SSHCONF_FINAL : 0, want_final_pass);
         }
 }
 
@@ -581,7 +583,7 @@ main(int ac, char **av)
 {
         struct ssh *ssh = NULL;
         int i, r, opt, exit_status, use_syslog, direct, timeout_ms;
-        int was_addr, config_test = 0, opt_terminated = 0;
+        int was_addr, config_test = 0, opt_terminated = 0, want_final_pass = 0;
         char *p, *cp, *line, *argv0, buf[PATH_MAX], *logfile;
         char cname[NI_MAXHOST];
         struct stat st;
@@ -610,6 +612,8 @@ main(int ac, char **av)
         av = saved_av;
 #endif
 
+        seed_rng();
+
         /*
          * Discard other fds that are hanging around. These can cause problem
          * with backgrounded ssh processes started by ControlPersist.
@@ -647,7 +651,6 @@ main(int ac, char **av)
         if ((ssh = ssh_alloc_session_state()) == NULL)
                 fatal("Couldn't allocate session state");
         channel_init_channels(ssh);
-        active_state = ssh; /* XXX legacy API compat */
 
         /* Parse command-line arguments. */
         host = NULL;
@@ -733,6 +736,8 @@ main(int ac, char **av)
                                 cp = mac_alg_list('\n');
                         else if (strcmp(optarg, "kex") == 0)
                                 cp = kex_alg_list('\n');
+                        else if (strcmp(optarg, "kex-gss") == 0)
+                                cp = kex_gss_alg_list('\n');
                         else if (strcmp(optarg, "key") == 0)
                                 cp = sshkey_alg_list(0, 0, 0, '\n');
                         else if (strcmp(optarg, "key-cert") == 0)
@@ -745,7 +750,7 @@ main(int ac, char **av)
                                 cp = xstrdup("2");
                         else if (strcmp(optarg, "help") == 0) {
                                 cp = xstrdup(
-                                    "cipher\ncipher-auth\nkex\nkey\n"
+                                    "cipher\ncipher-auth\nkex\nkex-gss\nkey\n"
                                     "key-cert\nkey-plain\nmac\n"
                                     "protocol-version\nsig");
                         }
@@ -816,7 +821,7 @@ main(int ac, char **av)
                         fprintf(stderr, "%s, %s\n",
                             SSH_RELEASE,
 #ifdef WITH_OPENSSL
-                            SSLeay_version(SSLEAY_VERSION)
+                            OpenSSL_version(OPENSSL_VERSION)
 #else
                             "without OpenSSL"
 #endif
@@ -1036,11 +1041,6 @@ main(int ac, char **av)
 
         host_arg = xstrdup(host);
 
-#ifdef WITH_OPENSSL
-        OpenSSL_add_all_algorithms();
-        ERR_load_crypto_strings();
-#endif
-
         /* Initialize the command to execute on remote host. */
         if ((command = sshbuf_new()) == NULL)
                 fatal("sshbuf_new failed");
@@ -1085,14 +1085,16 @@ main(int ac, char **av)
         if (debug_flag)
                 logit("%s, %s", SSH_RELEASE,
 #ifdef WITH_OPENSSL
-                    SSLeay_version(SSLEAY_VERSION)
+                    OpenSSL_version(OPENSSL_VERSION)
 #else
                     "without OpenSSL"
 #endif
                 );
 
         /* Parse the configuration files */
-        process_config_files(host_arg, pw, 0);
+        process_config_files(host_arg, pw, 0, &want_final_pass);
+        if (want_final_pass)
+                debug("configuration requests final Match pass");
 
         /* Hostname canonicalisation needs a few options filled. */
         fill_default_options_for_canonicalization(&options);
@@ -1149,12 +1151,17 @@ main(int ac, char **av)
          * If canonicalisation is enabled then re-parse the configuration
          * files as new stanzas may match.
          */
-        if (options.canonicalize_hostname != 0) {
-                debug("Re-reading configuration after hostname "
-                    "canonicalisation");
+        if (options.canonicalize_hostname != 0 && !want_final_pass) {
+                debug("hostname canonicalisation enabled, "
+                    "will re-parse configuration");
+                want_final_pass = 1;
+        }
+
+        if (want_final_pass) {
+                debug("re-parsing configuration");
                 free(options.hostname);
                 options.hostname = xstrdup(host);
-                process_config_files(host_arg, pw, 1);
+                process_config_files(host_arg, pw, 1, NULL);
                 /*
                  * Address resolution happens early with canonicalisation
                  * enabled and the port number may have changed since, so
@@ -1264,8 +1271,6 @@ main(int ac, char **av)
                 tty_flag = 0;
         }
 
-        seed_rng();
-
         if (options.user == NULL)
                 options.user = xstrdup(pw->pw_name);
 
@@ -1344,7 +1349,7 @@ main(int ac, char **av)
                 int sock;
                 if ((sock = muxclient(options.control_path)) >= 0) {
                         ssh_packet_set_connection(ssh, sock, sock);
-                        packet_set_mux();
+                        ssh_packet_set_mux(ssh);
                         goto skip_connect;
                 }
         }
@@ -1371,11 +1376,9 @@ main(int ac, char **av)
         if (addrs != NULL)
                 freeaddrinfo(addrs);
 
-        packet_set_timeout(options.server_alive_interval,
+        ssh_packet_set_timeout(ssh, options.server_alive_interval,
             options.server_alive_count_max);
 
-        ssh = active_state; /* XXX */
-
         if (timeout_ms > 0)
                 debug3("timeout: %d ms remain after connect", timeout_ms);
 
@@ -1486,10 +1489,10 @@ main(int ac, char **av)
         signal(SIGCHLD, main_sigchld_handler);
 
         /* Log into the remote system.  Never returns if the login fails. */
-        ssh_login(&sensitive_data, host, (struct sockaddr *)&hostaddr,
+        ssh_login(ssh, &sensitive_data, host, (struct sockaddr *)&hostaddr,
             options.port, pw, timeout_ms);
 
-        if (packet_connection_is_on_socket()) {
+        if (ssh_packet_connection_is_on_socket(ssh)) {
                 verbose("Authenticated to %s ([%s]:%d).", host,
                     ssh_remote_ipaddr(ssh), ssh_remote_port(ssh));
         } else {
@@ -1523,7 +1526,7 @@ main(int ac, char **av)
 
  skip_connect:
         exit_status = ssh_session2(ssh, pw);
-        packet_close();
+        ssh_packet_close(ssh);
 
         if (options.control_path != NULL && muxserver_sock != -1)
                 unlink(options.control_path);
@@ -1598,6 +1601,8 @@ static void
 ssh_confirm_remote_forward(struct ssh *ssh, int type, u_int32_t seq, void *ctxt)
 {
         struct Forward *rfwd = (struct Forward *)ctxt;
+        u_int port;
+        int r;
 
         /* XXX verbose() on failure? */
         debug("remote forward %s for: listen %s%s%d, connect %s:%d",
@@ -1609,12 +1614,25 @@ ssh_confirm_remote_forward(struct ssh *ssh, int type, u_int32_t seq, void *ctxt)
             rfwd->connect_host, rfwd->connect_port);
         if (rfwd->listen_path == NULL && rfwd->listen_port == 0) {
                 if (type == SSH2_MSG_REQUEST_SUCCESS) {
-                        rfwd->allocated_port = packet_get_int();
-                        logit("Allocated port %u for remote forward to %s:%d",
-                            rfwd->allocated_port,
-                            rfwd->connect_host, rfwd->connect_port);
-                        channel_update_permission(ssh,
-                            rfwd->handle, rfwd->allocated_port);
+                        if ((r = sshpkt_get_u32(ssh, &port)) != 0)
+                                fatal("%s: %s", __func__, ssh_err(r));
+                        if (port > 65535) {
+                                error("Invalid allocated port %u for remote "
+                                    "forward to %s:%d", port,
+                                    rfwd->connect_host, rfwd->connect_port);
+                                /* Ensure failure processing runs below */
+                                type = SSH2_MSG_REQUEST_FAILURE;
+                                channel_update_permission(ssh,
+                                    rfwd->handle, -1);
+                        } else {
+                                rfwd->allocated_port = (int)port;
+                                logit("Allocated port %u for remote "
+                                    "forward to %s:%d",
+                                    rfwd->allocated_port, rfwd->connect_host,
+                                    rfwd->connect_port);
+                                channel_update_permission(ssh,
+                                    rfwd->handle, rfwd->allocated_port);
+                        }
                 } else {
                         channel_update_permission(ssh, rfwd->handle, -1);
                 }
@@ -1771,7 +1789,7 @@ ssh_session2_setup(struct ssh *ssh, int id, int success, void *arg)
 {
         extern char **environ;
         const char *display;
-        int interactive = tty_flag;
+        int r, interactive = tty_flag;
         char *proto = NULL, *data = NULL;
 
         if (!success)
@@ -1797,11 +1815,12 @@ ssh_session2_setup(struct ssh *ssh, int id, int success, void *arg)
         if (options.forward_agent) {
                 debug("Requesting authentication agent forwarding.");
                 channel_request_start(ssh, id, "auth-agent-req@openssh.com", 0);
-                packet_send();
+                if ((r = sshpkt_send(ssh)) != 0)
+                        fatal("%s: %s", __func__, ssh_err(r));
         }
 
         /* Tell the packet module whether this is an interactive session. */
-        packet_set_interactive(interactive,
+        ssh_packet_set_interactive(ssh, interactive,
             options.ip_qos_interactive, options.ip_qos_bulk);
 
         client_session2_setup(ssh, id, tty_flag, subsystem_flag, getenv("TERM"),
@@ -1858,7 +1877,7 @@ ssh_session2_open(struct ssh *ssh)
 static int
 ssh_session2(struct ssh *ssh, struct passwd *pw)
 {
-        int devnull, id = -1;
+        int r, devnull, id = -1;
         char *cp, *tun_fwd_ifname = NULL;
 
         /* XXX should be pre-session */
@@ -1888,7 +1907,7 @@ ssh_session2(struct ssh *ssh, struct passwd *pw)
         }
 
         /* Start listening for multiplex clients */
-        if (!packet_get_mux())
+        if (!ssh_packet_get_mux(ssh))
                 muxserver_listen(ssh);
 
         /*
@@ -1922,7 +1941,7 @@ ssh_session2(struct ssh *ssh, struct passwd *pw)
         if (!no_shell_flag)
                 id = ssh_session2_open(ssh);
         else {
-                packet_set_interactive(
+                ssh_packet_set_interactive(ssh,
                     options.control_master == SSHCTL_MASTER_NO,
                     options.ip_qos_interactive, options.ip_qos_bulk);
         }
@@ -1931,10 +1950,12 @@ ssh_session2(struct ssh *ssh, struct passwd *pw)
         if (options.control_master == SSHCTL_MASTER_NO &&
             (datafellows & SSH_NEW_OPENSSH)) {
                 debug("Requesting no-more-sessions@openssh.com");
-                packet_start(SSH2_MSG_GLOBAL_REQUEST);
-                packet_put_cstring("no-more-sessions@openssh.com");
-                packet_put_char(0);
-                packet_send();
+                if ((r = sshpkt_start(ssh, SSH2_MSG_GLOBAL_REQUEST)) != 0 ||
+                    (r = sshpkt_put_cstring(ssh,
+                    "no-more-sessions@openssh.com")) != 0 ||
+                    (r = sshpkt_put_u8(ssh, 0)) != 0 ||
+                    (r = sshpkt_send(ssh)) != 0)
+                        fatal("%s: %s", __func__, ssh_err(r));
         }
 
         /* Execute a local command */