Import OpenSSH 3.9p1.

1 files changed, 494 insertions, 0 deletions

diff --git a/ssh_config.0 b/ssh_config.0
new file mode 100644
index 000000000..d1a6ab364
--- /dev/null
+++ b/ssh_config.0
@@ -0,0 +1,494 @@
+SSH_CONFIG(5)             OpenBSD Programmer's Manual            SSH_CONFIG(5)
+
+NAME
+     ssh_config - OpenSSH SSH client configuration files
+
+SYNOPSIS
+     $HOME/.ssh/config
+     /etc/ssh/ssh_config
+
+DESCRIPTION
+     ssh obtains configuration data from the following sources in the follow-
+     ing order:
+           1.   command-line options
+           2.   user's configuration file ($HOME/.ssh/config)
+           3.   system-wide configuration file (/etc/ssh/ssh_config)
+
+     For each parameter, the first obtained value will be used.  The configu-
+     ration files contain sections bracketed by ``Host'' specifications, and
+     that section is only applied for hosts that match one of the patterns
+     given in the specification.  The matched host name is the one given on
+     the command line.
+
+     Since the first obtained value for each parameter is used, more host-spe-
+     cific declarations should be given near the beginning of the file, and
+     general defaults at the end.
+
+     The configuration file has the following format:
+
+     Empty lines and lines starting with `#' are comments.
+
+     Otherwise a line is of the format ``keyword arguments''.  Configuration
+     options may be separated by whitespace or optional whitespace and exactly
+     one `='; the latter format is useful to avoid the need to quote whites-
+     pace when specifying configuration options using the ssh, scp and sftp -o
+     option.
+
+     The possible keywords and their meanings are as follows (note that key-
+     words are case-insensitive and arguments are case-sensitive):
+
+     Host    Restricts the following declarations (up to the next Host key-
+             word) to be only for those hosts that match one of the patterns
+             given after the keyword.  `*' and `?' can be used as wildcards in
+             the patterns.  A single `*' as a pattern can be used to provide
+             global defaults for all hosts.  The host is the hostname argument
+             given on the command line (i.e., the name is not converted to a
+             canonicalized host name before matching).
+
+     AddressFamily
+             Specifies which address family to use when connecting.  Valid ar-
+             guments are ``any'', ``inet'' (Use IPv4 only) or ``inet6'' (Use
+             IPv6 only.)
+
+     BatchMode
+             If set to ``yes'', passphrase/password querying will be disabled.
+             This option is useful in scripts and other batch jobs where no
+             user is present to supply the password.  The argument must be
+             ``yes'' or ``no''.  The default is ``no''.
+
+     BindAddress
+             Specify the interface to transmit from on machines with multiple
+             interfaces or aliased addresses.  Note that this option does not
+             work if UsePrivilegedPort is set to ``yes''.
+
+     ChallengeResponseAuthentication
+             Specifies whether to use challenge response authentication.  The
+             argument to this keyword must be ``yes'' or ``no''.  The default
+             is ``yes''.
+
+     CheckHostIP
+             If this flag is set to ``yes'', ssh will additionally check the
+             host IP address in the known_hosts file.  This allows ssh to de-
+             tect if a host key changed due to DNS spoofing.  If the option is
+             set to ``no'', the check will not be executed.  The default is
+             ``yes''.
+
+     Cipher  Specifies the cipher to use for encrypting the session in proto-
+             col version 1.  Currently, ``blowfish'', ``3des'', and ``des''
+             are supported.  des is only supported in the ssh client for in-
+             teroperability with legacy protocol 1 implementations that do not
+             support the 3des cipher.  Its use is strongly discouraged due to
+             cryptographic weaknesses.  The default is ``3des''.
+
+     Ciphers
+             Specifies the ciphers allowed for protocol version 2 in order of
+             preference.  Multiple ciphers must be comma-separated.  The sup-
+             ported ciphers are ``3des-cbc'', ``aes128-cbc'', ``aes192-cbc'',
+             ``aes256-cbc'', ``aes128-ctr'', ``aes192-ctr'', ``aes256-ctr'',
+             ``arcfour'', ``blowfish-cbc'', and ``cast128-cbc''.  The default
+             is
+
+               ``aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,
+                 aes192-cbc,aes256-cbc''
+
+     ClearAllForwardings
+             Specifies that all local, remote and dynamic port forwardings
+             specified in the configuration files or on the command line be
+             cleared.  This option is primarily useful when used from the ssh
+             command line to clear port forwardings set in configuration
+             files, and is automatically set by scp(1) and sftp(1).  The argu-
+             ment must be ``yes'' or ``no''.  The default is ``no''.
+
+     Compression
+             Specifies whether to use compression.  The argument must be
+             ``yes'' or ``no''.  The default is ``no''.
+
+     CompressionLevel
+             Specifies the compression level to use if compression is enabled.
+             The argument must be an integer from 1 (fast) to 9 (slow, best).
+             The default level is 6, which is good for most applications.  The
+             meaning of the values is the same as in gzip(1).  Note that this
+             option applies to protocol version 1 only.
+
+     ConnectionAttempts
+             Specifies the number of tries (one per second) to make before ex-
+             iting.  The argument must be an integer.  This may be useful in
+             scripts if the connection sometimes fails.  The default is 1.
+
+     ConnectTimeout
+             Specifies the timeout (in seconds) used when connecting to the
+             ssh server, instead of using the default system TCP timeout.
+             This value is used only when the target is down or really un-
+             reachable, not when it refuses the connection.
+
+     ControlMaster
+             Enables the sharing of multiple sessions over a single network
+             connection.  When set to ``yes'' ssh will listen for connections
+             on a control socket specified using the ControlPath argument.
+             Additional sessions can connect to this socket using the same
+             ControlPath with ControlMaster set to ``no'' (the default).
+             These sessions will reuse the master instance's network connec-
+             tion rather than initiating new ones.  Setting this to ``ask''
+             will cause ssh to listen for control connections, but require
+             confirmation using the SSH_ASKPASS program before they are ac-
+             cepted (see ssh-add(1) for details).
+
+     ControlPath
+             Specify the path to the control socket used for connection shar-
+             ing.  See ControlMaster above.
+
+     DynamicForward
+             Specifies that a TCP/IP port on the local machine be forwarded
+             over the secure channel, and the application protocol is then
+             used to determine where to connect to from the remote machine.
+             The argument must be a port number.  Currently the SOCKS4 and
+             SOCKS5 protocols are supported, and ssh will act as a SOCKS serv-
+             er.  Multiple forwardings may be specified, and additional for-
+             wardings can be given on the command line.  Only the superuser
+             can forward privileged ports.
+
+     EnableSSHKeysign
+             Setting this option to ``yes'' in the global client configuration
+             file /etc/ssh/ssh_config enables the use of the helper program
+             ssh-keysign(8) during HostbasedAuthentication.  The argument must
+             be ``yes'' or ``no''.  The default is ``no''.  This option should
+             be placed in the non-hostspecific section.  See ssh-keysign(8)
+             for more information.
+
+     EscapeChar
+             Sets the escape character (default: `~').  The escape character
+             can also be set on the command line.  The argument should be a
+             single character, `^' followed by a letter, or ``none'' to dis-
+             able the escape character entirely (making the connection trans-
+             parent for binary data).
+
+     ForwardAgent
+             Specifies whether the connection to the authentication agent (if
+             any) will be forwarded to the remote machine.  The argument must
+             be ``yes'' or ``no''.  The default is ``no''.
+
+             Agent forwarding should be enabled with caution.  Users with the
+             ability to bypass file permissions on the remote host (for the
+             agent's Unix-domain socket) can access the local agent through
+             the forwarded connection.  An attacker cannot obtain key material
+             from the agent, however they can perform operations on the keys
+             that enable them to authenticate using the identities loaded into
+             the agent.
+
+     ForwardX11
+             Specifies whether X11 connections will be automatically redirect-
+             ed over the secure channel and DISPLAY set.  The argument must be
+             ``yes'' or ``no''.  The default is ``no''.
+
+             X11 forwarding should be enabled with caution.  Users with the
+             ability to bypass file permissions on the remote host (for the
+             user's X11 authorization database) can access the local X11 dis-
+             play through the forwarded connection.  An attacker may then be
+             able to perform activities such as keystroke monitoring if the
+             ForwardX11Trusted option is also enabled.
+
+     ForwardX11Trusted
+             If this option is set to ``yes'' then remote X11 clients will
+             have full access to the original X11 display.  If this option is
+             set to ``no'' then remote X11 clients will be considered untrust-
+             ed and prevented from stealing or tampering with data belonging
+             to trusted X11 clients.
+
+             The default is ``no''.
+
+             See the X11 SECURITY extension specification for full details on
+             the restrictions imposed on untrusted clients.
+
+     GatewayPorts
+             Specifies whether remote hosts are allowed to connect to local
+             forwarded ports.  By default, ssh binds local port forwardings to
+             the loopback address.  This prevents other remote hosts from con-
+             necting to forwarded ports.  GatewayPorts can be used to specify
+             that ssh should bind local port forwardings to the wildcard ad-
+             dress, thus allowing remote hosts to connect to forwarded ports.
+             The argument must be ``yes'' or ``no''.  The default is ``no''.
+
+     GlobalKnownHostsFile
+             Specifies a file to use for the global host key database instead
+             of /etc/ssh/ssh_known_hosts.
+
+     GSSAPIAuthentication
+             Specifies whether user authentication based on GSSAPI is allowed.
+             The default is ``no''.  Note that this option applies to protocol
+             version 2 only.
+
+     GSSAPIDelegateCredentials
+             Forward (delegate) credentials to the server.  The default is
+             ``no''.  Note that this option applies to protocol version 2 on-
+             ly.
+
+     HostbasedAuthentication
+             Specifies whether to try rhosts based authentication with public
+             key authentication.  The argument must be ``yes'' or ``no''.  The
+             default is ``no''.  This option applies to protocol version 2 on-
+             ly and is similar to RhostsRSAAuthentication.
+
+     HostKeyAlgorithms
+             Specifies the protocol version 2 host key algorithms that the
+             client wants to use in order of preference.  The default for this
+             option is: ``ssh-rsa,ssh-dss''.
+
+     HostKeyAlias
+             Specifies an alias that should be used instead of the real host
+             name when looking up or saving the host key in the host key
+             database files.  This option is useful for tunneling ssh connec-
+             tions or for multiple servers running on a single host.
+
+     HostName
+             Specifies the real host name to log into.  This can be used to
+             specify nicknames or abbreviations for hosts.  Default is the
+             name given on the command line.  Numeric IP addresses are also
+             permitted (both on the command line and in HostName specifica-
+             tions).
+
+     IdentityFile
+             Specifies a file from which the user's RSA or DSA authentication
+             identity is read.  The default is $HOME/.ssh/identity for proto-
+             col version 1, and $HOME/.ssh/id_rsa and $HOME/.ssh/id_dsa for
+             protocol version 2.  Additionally, any identities represented by
+             the authentication agent will be used for authentication.  The
+             file name may use the tilde syntax to refer to a user's home di-
+             rectory.  It is possible to have multiple identity files speci-
+             fied in configuration files; all these identities will be tried
+             in sequence.
+
+     IdentitiesOnly
+             Specifies that ssh should only use the authentication identity
+             files configured in the ssh_config files, even if the ssh-agent
+             offers more identities.  The argument to this keyword must be
+             ``yes'' or ``no''.  This option is intented for situations where
+             ssh-agent offers many different identities.  The default is
+             ``no''.
+
+     LocalForward
+             Specifies that a TCP/IP port on the local machine be forwarded
+             over the secure channel to the specified host and port from the
+             remote machine.  The first argument must be a port number, and
+             the second must be host:port.  IPv6 addresses can be specified
+             with an alternative syntax: host/port.  Multiple forwardings may
+             be specified, and additional forwardings can be given on the com-
+             mand line.  Only the superuser can forward privileged ports.
+
+     LogLevel
+             Gives the verbosity level that is used when logging messages from
+             ssh.  The possible values are: QUIET, FATAL, ERROR, INFO, VER-
+             BOSE, DEBUG, DEBUG1, DEBUG2 and DEBUG3.  The default is INFO.
+             DEBUG and DEBUG1 are equivalent.  DEBUG2 and DEBUG3 each specify
+             higher levels of verbose output.
+
+     MACs    Specifies the MAC (message authentication code) algorithms in or-
+             der of preference.  The MAC algorithm is used in protocol version
+             2 for data integrity protection.  Multiple algorithms must be
+             comma-separated.  The default is ``hmac-md5,hmac-sha1,hmac-
+             ripemd160,hmac-sha1-96,hmac-md5-96''.
+
+     NoHostAuthenticationForLocalhost
+             This option can be used if the home directory is shared across
+             machines.  In this case localhost will refer to a different ma-
+             chine on each of the machines and the user will get many warnings
+             about changed host keys.  However, this option disables host au-
+             thentication for localhost.  The argument to this keyword must be
+             ``yes'' or ``no''.  The default is to check the host key for lo-
+             calhost.
+
+     NumberOfPasswordPrompts
+             Specifies the number of password prompts before giving up.  The
+             argument to this keyword must be an integer.  Default is 3.
+
+     PasswordAuthentication
+             Specifies whether to use password authentication.  The argument
+             to this keyword must be ``yes'' or ``no''.  The default is
+             ``yes''.
+
+     Port    Specifies the port number to connect on the remote host.  Default
+             is 22.
+
+     PreferredAuthentications
+             Specifies the order in which the client should try protocol 2 au-
+             thentication methods.  This allows a client to prefer one method
+             (e.g.  keyboard-interactive) over another method (e.g.  password)
+             The default for this option is: ``hostbased,publickey,keyboard-
+             interactive,password''.
+
+     Protocol
+             Specifies the protocol versions ssh should support in order of
+             preference.  The possible values are ``1'' and ``2''.  Multiple
+             versions must be comma-separated.  The default is ``2,1''.  This
+             means that ssh tries version 2 and falls back to version 1 if
+             version 2 is not available.
+
+     ProxyCommand
+             Specifies the command to use to connect to the server.  The com-
+             mand string extends to the end of the line, and is executed with
+             /bin/sh.  In the command string, `%h' will be substituted by the
+             host name to connect and `%p' by the port.  The command can be
+             basically anything, and should read from its standard input and
+             write to its standard output.  It should eventually connect an
+             sshd(8) server running on some machine, or execute sshd -i some-
+             where.  Host key management will be done using the HostName of
+             the host being connected (defaulting to the name typed by the us-
+             er).  Setting the command to ``none'' disables this option en-
+             tirely.  Note that CheckHostIP is not available for connects with
+             a proxy command.
+
+     PubkeyAuthentication
+             Specifies whether to try public key authentication.  The argument
+             to this keyword must be ``yes'' or ``no''.  The default is
+             ``yes''.  This option applies to protocol version 2 only.
+
+     RemoteForward
+             Specifies that a TCP/IP port on the remote machine be forwarded
+             over the secure channel to the specified host and port from the
+             local machine.  The first argument must be a port number, and the
+             second must be host:port.  IPv6 addresses can be specified with
+             an alternative syntax: host/port.  Multiple forwardings may be
+             specified, and additional forwardings can be given on the command
+             line.  Only the superuser can forward privileged ports.
+
+     RhostsRSAAuthentication
+             Specifies whether to try rhosts based authentication with RSA
+             host authentication.  The argument must be ``yes'' or ``no''.
+             The default is ``no''.  This option applies to protocol version 1
+             only and requires ssh to be setuid root.
+
+     RSAAuthentication
+             Specifies whether to try RSA authentication.  The argument to
+             this keyword must be ``yes'' or ``no''.  RSA authentication will
+             only be attempted if the identity file exists, or an authentica-
+             tion agent is running.  The default is ``yes''.  Note that this
+             option applies to protocol version 1 only.
+
+     SendEnv
+             Specifies what variables from the local environ(7) should be sent
+             to the server.  Note that environment passing is only supported
+             for protocol 2, the server must also support it, and the server
+             must be configured to accept these environment variables.  Refer
+             to AcceptEnv in sshd_config(5) for how to configure the server.
+             Variables are specified by name, which may contain the wildcard
+             characters `*' and `?'.  Multiple environment variables may be
+             separated by whitespace or spread across multiple SendEnv direc-
+             tives.  The default is not to send any environment variables.
+
+     ServerAliveInterval
+             Sets a timeout interval in seconds after which if no data has
+             been received from the server, ssh will send a message through
+             the encrypted channel to request a response from the server.  The
+             default is 0, indicating that these messages will not be sent to
+             the server.  This option applies to protocol version 2 only.
+
+     ServerAliveCountMax
+             Sets the number of server alive messages (see above) which may be
+             sent without ssh receiving any messages back from the server.  If
+             this threshold is reached while server alive messages are being
+             sent, ssh will disconnect from the server, terminating the ses-
+             sion.  It is important to note that the use of server alive mes-
+             sages is very different from TCPKeepAlive (below).  The server
+             alive messages are sent through the encrypted channel and there-
+             fore will not be spoofable.  The TCP keepalive option enabled by
+             TCPKeepAlive is spoofable.  The server alive mechanism is valu-
+             able when the client or server depend on knowing when a connec-
+             tion has become inactive.
+
+             The default value is 3.  If, for example, ServerAliveInterval
+             (above) is set to 15, and ServerAliveCountMax is left at the de-
+             fault, if the server becomes unresponsive ssh will disconnect af-
+             ter approximately 45 seconds.
+
+     SmartcardDevice
+             Specifies which smartcard device to use.  The argument to this
+             keyword is the device ssh should use to communicate with a smart-
+             card used for storing the user's private RSA key.  By default, no
+             device is specified and smartcard support is not activated.
+
+     StrictHostKeyChecking
+             If this flag is set to ``yes'', ssh will never automatically add
+             host keys to the $HOME/.ssh/known_hosts file, and refuses to con-
+             nect to hosts whose host key has changed.  This provides maximum
+             protection against trojan horse attacks, however, can be annoying
+             when the /etc/ssh/ssh_known_hosts file is poorly maintained, or
+             connections to new hosts are frequently made.  This option forces
+             the user to manually add all new hosts.  If this flag is set to
+             ``no'', ssh will automatically add new host keys to the user
+             known hosts files.  If this flag is set to ``ask'', new host keys
+             will be added to the user known host files only after the user
+             has confirmed that is what they really want to do, and ssh will
+             refuse to connect to hosts whose host key has changed.  The host
+             keys of known hosts will be verified automatically in all cases.
+             The argument must be ``yes'', ``no'' or ``ask''.  The default is
+             ``ask''.
+
+     TCPKeepAlive
+             Specifies whether the system should send TCP keepalive messages
+             to the other side.  If they are sent, death of the connection or
+             crash of one of the machines will be properly noticed.  However,
+             this means that connections will die if the route is down tem-
+             porarily, and some people find it annoying.
+
+             The default is ``yes'' (to send TCP keepalive messages), and the
+             client will notice if the network goes down or the remote host
+             dies.  This is important in scripts, and many users want it too.
+
+             To disable TCP keepalive messages, the value should be set to
+             ``no''.
+
+     UsePrivilegedPort
+             Specifies whether to use a privileged port for outgoing connec-
+             tions.  The argument must be ``yes'' or ``no''.  The default is
+             ``no''.  If set to ``yes'' ssh must be setuid root.  Note that
+             this option must be set to ``yes'' for RhostsRSAAuthentication
+             with older servers.
+
+     User    Specifies the user to log in as.  This can be useful when a dif-
+             ferent user name is used on different machines.  This saves the
+             trouble of having to remember to give the user name on the com-
+             mand line.
+
+     UserKnownHostsFile
+             Specifies a file to use for the user host key database instead of
+             $HOME/.ssh/known_hosts.
+
+     VerifyHostKeyDNS
+             Specifies whether to verify the remote key using DNS and SSHFP
+             resource records.  If this option is set to ``yes'', the client
+             will implicitly trust keys that match a secure fingerprint from
+             DNS.  Insecure fingerprints will be handled as if this option was
+             set to ``ask''.  If this option is set to ``ask'', information on
+             fingerprint match will be displayed, but the user will still need
+             to confirm new host keys according to the StrictHostKeyChecking
+             option.  The argument must be ``yes'', ``no'' or ``ask''.  The
+             default is ``no''.  Note that this option applies to protocol
+             version 2 only.
+
+     XAuthLocation
+             Specifies the full pathname of the xauth(1) program.  The default
+             is /usr/X11R6/bin/xauth.
+
+FILES
+     $HOME/.ssh/config
+             This is the per-user configuration file.  The format of this file
+             is described above.  This file is used by the ssh client.  Be-
+             cause of the potential for abuse, this file must have strict per-
+             missions: read/write for the user, and not accessible by others.
+
+     /etc/ssh/ssh_config
+             Systemwide configuration file.  This file provides defaults for
+             those values that are not specified in the user's configuration
+             file, and for those users who do not have a configuration file.
+             This file must be world-readable.
+
+SEE ALSO
+     ssh(1)
+
+AUTHORS
+     OpenSSH is a derivative of the original and free ssh 1.2.12 release by
+     Tatu Ylonen.  Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo
+     de Raadt and Dug Song removed many bugs, re-added newer features and cre-
+     ated OpenSSH.  Markus Friedl contributed the support for SSH protocol
+     versions 1.5 and 2.0.
+
+OpenBSD 3.6                   September 25, 1999                             8