Import openssh_7.4p1.orig.tar.gz

1 files changed, 248 insertions, 261 deletions

diff --git a/ssh_config.0 b/ssh_config.0
index 8733281f5..4ca9a5ff8 100644
--- a/ssh_config.0
+++ b/ssh_config.0
@@ -16,25 +16,23 @@ DESCRIPTION
            3.   system-wide configuration file (/etc/ssh/ssh_config)
 
      For each parameter, the first obtained value will be used.  The
-     configuration files contain sections separated by M-bM-^@M-^\HostM-bM-^@M-^] specifications,
+     configuration files contain sections separated by Host specifications,
      and that section is only applied for hosts that match one of the patterns
      given in the specification.  The matched host name is usually the one
      given on the command line (see the CanonicalizeHostname option for
-     exceptions.)
+     exceptions).
 
      Since the first obtained value for each parameter is used, more host-
      specific declarations should be given near the beginning of the file, and
      general defaults at the end.
 
-     The configuration file has the following format:
-
-     Empty lines and lines starting with M-bM-^@M-^X#M-bM-^@M-^Y are comments.  Otherwise a line
-     is of the format M-bM-^@M-^\keyword argumentsM-bM-^@M-^].  Configuration options may be
-     separated by whitespace or optional whitespace and exactly one M-bM-^@M-^X=M-bM-^@M-^Y; the
-     latter format is useful to avoid the need to quote whitespace when
-     specifying configuration options using the ssh, scp, and sftp -o option.
-     Arguments may optionally be enclosed in double quotes (") in order to
-     represent arguments containing spaces.
+     The file contains keyword-argument pairs, one per line.  Lines starting
+     with M-bM-^@M-^X#M-bM-^@M-^Y and empty lines are interpreted as comments.  Arguments may
+     optionally be enclosed in double quotes (") in order to represent
+     arguments containing spaces.  Configuration options may be separated by
+     whitespace or optional whitespace and exactly one M-bM-^@M-^X=M-bM-^@M-^Y; the latter format
+     is useful to avoid the need to quote whitespace when specifying
+     configuration options using the ssh, scp, and sftp -o option.
 
      The possible keywords and their meanings are as follows (note that
      keywords are case-insensitive and arguments are case-sensitive):
@@ -45,8 +43,8 @@ DESCRIPTION
              provided, they should be separated by whitespace.  A single M-bM-^@M-^X*M-bM-^@M-^Y
              as a pattern can be used to provide global defaults for all
              hosts.  The host is usually the hostname argument given on the
-             command line (see the CanonicalizeHostname option for
-             exceptions.)
+             command line (see the CanonicalizeHostname keyword for
+             exceptions).
 
              A pattern entry may be negated by prefixing it with an
              exclamation mark (M-bM-^@M-^X!M-bM-^@M-^Y).  If a negated entry is matched, then the
@@ -74,14 +72,8 @@ DESCRIPTION
              keyword executes the specified command under the user's shell.
              If the command returns a zero exit status then the condition is
              considered true.  Commands containing whitespace characters must
-             be quoted.  The following character sequences in the command will
-             be expanded prior to execution: M-bM-^@M-^X%LM-bM-^@M-^Y will be substituted by the
-             first component of the local host name, M-bM-^@M-^X%lM-bM-^@M-^Y will be substituted
-             by the local host name (including any domain name), M-bM-^@M-^X%hM-bM-^@M-^Y will be
-             substituted by the target host name, M-bM-^@M-^X%nM-bM-^@M-^Y will be substituted by
-             the original target host name specified on the command-line, M-bM-^@M-^X%pM-bM-^@M-^Y
-             the destination port, M-bM-^@M-^X%rM-bM-^@M-^Y by the remote login username, and M-bM-^@M-^X%uM-bM-^@M-^Y
-             by the username of the user running ssh(1).
+             be quoted.  Arguments to exec accept the tokens described in the
+             TOKENS section.
 
              The other keywords' criteria must be single entries or comma-
              separated lists and may use the wildcard and negation operators
@@ -96,33 +88,33 @@ DESCRIPTION
 
      AddKeysToAgent
              Specifies whether keys should be automatically added to a running
-             ssh-agent(1).  If this option is set to M-bM-^@M-^\yesM-bM-^@M-^] and a key is loaded
+             ssh-agent(1).  If this option is set to yes and a key is loaded
              from a file, the key and its passphrase are added to the agent
              with the default lifetime, as if by ssh-add(1).  If this option
-             is set to M-bM-^@M-^\askM-bM-^@M-^], ssh will require confirmation using the
+             is set to ask, ssh(1) will require confirmation using the
              SSH_ASKPASS program before adding a key (see ssh-add(1) for
-             details).  If this option is set to M-bM-^@M-^\confirmM-bM-^@M-^], each use of the
-             key must be confirmed, as if the -c option was specified to
-             ssh-add(1).  If this option is set to M-bM-^@M-^\noM-bM-^@M-^], no keys are added to
-             the agent.  The argument must be M-bM-^@M-^\yesM-bM-^@M-^], M-bM-^@M-^\confirmM-bM-^@M-^], M-bM-^@M-^\askM-bM-^@M-^], or
-             M-bM-^@M-^\noM-bM-^@M-^].  The default is M-bM-^@M-^\noM-bM-^@M-^].
+             details).  If this option is set to confirm, each use of the key
+             must be confirmed, as if the -c option was specified to
+             ssh-add(1).  If this option is set to no, no keys are added to
+             the agent.  The argument must be yes, confirm, ask, or no (the
+             default).
 
      AddressFamily
              Specifies which address family to use when connecting.  Valid
-             arguments are M-bM-^@M-^\anyM-bM-^@M-^], M-bM-^@M-^\inetM-bM-^@M-^] (use IPv4 only), or M-bM-^@M-^\inet6M-bM-^@M-^] (use IPv6
-             only).  The default is M-bM-^@M-^\anyM-bM-^@M-^].
+             arguments are any (the default), inet (use IPv4 only), or inet6
+             (use IPv6 only).
 
      BatchMode
-             If set to M-bM-^@M-^\yesM-bM-^@M-^], passphrase/password querying will be disabled.
+             If set to yes, passphrase/password querying will be disabled.
              This option is useful in scripts and other batch jobs where no
-             user is present to supply the password.  The argument must be
-             M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The default is M-bM-^@M-^\noM-bM-^@M-^].
+             user is present to supply the password.  The argument must be yes
+             or no (the default).
 
      BindAddress
              Use the specified address on the local machine as the source
              address of the connection.  Only useful on systems with more than
              one address.  Note that this option does not work if
-             UsePrivilegedPort is set to M-bM-^@M-^\yesM-bM-^@M-^].
+             UsePrivilegedPort is set to yes.
 
      CanonicalDomains
              When CanonicalizeHostname is enabled, this option specifies the
@@ -131,21 +123,21 @@ DESCRIPTION
 
      CanonicalizeFallbackLocal
              Specifies whether to fail with an error when hostname
-             canonicalization fails.  The default, M-bM-^@M-^\yesM-bM-^@M-^], will attempt to look
+             canonicalization fails.  The default, yes, will attempt to look
              up the unqualified hostname using the system resolver's search
-             rules.  A value of M-bM-^@M-^\noM-bM-^@M-^] will cause ssh(1) to fail instantly if
+             rules.  A value of no will cause ssh(1) to fail instantly if
              CanonicalizeHostname is enabled and the target hostname cannot be
              found in any of the domains specified by CanonicalDomains.
 
      CanonicalizeHostname
              Controls whether explicit hostname canonicalization is performed.
-             The default, M-bM-^@M-^\noM-bM-^@M-^], is not to perform any name rewriting and let
-             the system resolver handle all hostname lookups.  If set to M-bM-^@M-^\yesM-bM-^@M-^]
-             then, for connections that do not use a ProxyCommand, ssh(1) will
+             The default, no, is not to perform any name rewriting and let the
+             system resolver handle all hostname lookups.  If set to yes then,
+             for connections that do not use a ProxyCommand, ssh(1) will
              attempt to canonicalize the hostname specified on the command
              line using the CanonicalDomains suffixes and
              CanonicalizePermittedCNAMEs rules.  If CanonicalizeHostname is
-             set to M-bM-^@M-^\alwaysM-bM-^@M-^], then canonicalization is applied to proxied
+             set to always, then canonicalization is applied to proxied
              connections too.
 
              If this option is enabled, then the configuration files are
@@ -154,7 +146,7 @@ DESCRIPTION
 
      CanonicalizeMaxDots
              Specifies the maximum number of dot characters in a hostname
-             before canonicalization is disabled.  The default, M-bM-^@M-^\1M-bM-^@M-^], allows a
+             before canonicalization is disabled.  The default, 1, allows a
              single dot (i.e. hostname.subdomain).
 
      CanonicalizePermittedCNAMEs
@@ -165,10 +157,10 @@ DESCRIPTION
              CNAMEs in canonicalization, and target_domain_list is a pattern-
              list of domains that they may resolve to.
 
-             For example, M-bM-^@M-^\*.a.example.com:*.b.example.com,*.c.example.comM-bM-^@M-^]
-             will allow hostnames matching M-bM-^@M-^\*.a.example.comM-bM-^@M-^] to be
-             canonicalized to names in the M-bM-^@M-^\*.b.example.comM-bM-^@M-^] or
-             M-bM-^@M-^\*.c.example.comM-bM-^@M-^] domains.
+             For example, "*.a.example.com:*.b.example.com,*.c.example.com"
+             will allow hostnames matching "*.a.example.com" to be
+             canonicalized to names in the "*.b.example.com" or
+             "*.c.example.com" domains.
 
      CertificateFile
              Specifies a file from which the user's certificate is read.  A
@@ -176,10 +168,9 @@ DESCRIPTION
              use this certificate either from an IdentityFile directive or -i
              flag to ssh(1), via ssh-agent(1), or via a PKCS11Provider.
 
-             The file name may use the tilde syntax to refer to a user's home
-             directory or one of the following escape characters: M-bM-^@M-^X%dM-bM-^@M-^Y (local
-             user's home directory), M-bM-^@M-^X%uM-bM-^@M-^Y (local user name), M-bM-^@M-^X%lM-bM-^@M-^Y (local host
-             name), M-bM-^@M-^X%hM-bM-^@M-^Y (remote host name) or M-bM-^@M-^X%rM-bM-^@M-^Y (remote user name).
+             Arguments to CertificateFile may use the tilde syntax to refer to
+             a user's home directory or the tokens described in the TOKENS
+             section.
 
              It is possible to have multiple certificate files specified in
              configuration files; these certificates will be tried in
@@ -188,24 +179,22 @@ DESCRIPTION
 
      ChallengeResponseAuthentication
              Specifies whether to use challenge-response authentication.  The
-             argument to this keyword must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The default is
-             M-bM-^@M-^\yesM-bM-^@M-^].
+             argument to this keyword must be yes (the default) or no.
 
      CheckHostIP
-             If this flag is set to M-bM-^@M-^\yesM-bM-^@M-^], ssh(1) will additionally check the
-             host IP address in the known_hosts file.  This allows ssh to
+             If set to yes (the default), ssh(1) will additionally check the
+             host IP address in the known_hosts file.  This allows it to
              detect if a host key changed due to DNS spoofing and will add
              addresses of destination hosts to ~/.ssh/known_hosts in the
              process, regardless of the setting of StrictHostKeyChecking.  If
-             the option is set to M-bM-^@M-^\noM-bM-^@M-^], the check will not be executed.  The
-             default is M-bM-^@M-^\yesM-bM-^@M-^].
+             the option is set to no, the check will not be executed.
 
      Cipher  Specifies the cipher to use for encrypting the session in
-             protocol version 1.  Currently, M-bM-^@M-^\blowfishM-bM-^@M-^], M-bM-^@M-^\3desM-bM-^@M-^], and M-bM-^@M-^\desM-bM-^@M-^] are
-             supported.  des is only supported in the ssh(1) client for
-             interoperability with legacy protocol 1 implementations that do
-             not support the 3des cipher.  Its use is strongly discouraged due
-             to cryptographic weaknesses.  The default is M-bM-^@M-^\3desM-bM-^@M-^].
+             protocol version 1.  Currently, blowfish, 3des (the default), and
+             des are supported, though des is only supported in the ssh(1)
+             client for interoperability with legacy protocol 1
+             implementations; its use is strongly discouraged due to
+             cryptographic weaknesses.
 
      Ciphers
              Specifies the ciphers allowed for protocol version 2 in order of
@@ -237,10 +226,10 @@ DESCRIPTION
                    chacha20-poly1305@openssh.com,
                    aes128-ctr,aes192-ctr,aes256-ctr,
                    aes128-gcm@openssh.com,aes256-gcm@openssh.com,
-                   aes128-cbc,aes192-cbc,aes256-cbc,3des-cbc
+                   aes128-cbc,aes192-cbc,aes256-cbc
 
-             The list of available ciphers may also be obtained using the -Q
-             option of ssh(1) with an argument of M-bM-^@M-^\cipherM-bM-^@M-^].
+             The list of available ciphers may also be obtained using "ssh -Q
+             cipher".
 
      ClearAllForwardings
              Specifies that all local, remote, and dynamic port forwardings
@@ -248,12 +237,11 @@ DESCRIPTION
              cleared.  This option is primarily useful when used from the
              ssh(1) command line to clear port forwardings set in
              configuration files, and is automatically set by scp(1) and
-             sftp(1).  The argument must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The default is
-             M-bM-^@M-^\noM-bM-^@M-^].
+             sftp(1).  The argument must be yes or no (the default).
 
      Compression
-             Specifies whether to use compression.  The argument must be M-bM-^@M-^\yesM-bM-^@M-^]
-             or M-bM-^@M-^\noM-bM-^@M-^].  The default is M-bM-^@M-^\noM-bM-^@M-^].
+             Specifies whether to use compression.  The argument must be yes
+             or no (the default).
 
      CompressionLevel
              Specifies the compression level to use if compression is enabled.
@@ -275,18 +263,18 @@ DESCRIPTION
 
      ControlMaster
              Enables the sharing of multiple sessions over a single network
-             connection.  When set to M-bM-^@M-^\yesM-bM-^@M-^], ssh(1) will listen for
-             connections on a control socket specified using the ControlPath
-             argument.  Additional sessions can connect to this socket using
-             the same ControlPath with ControlMaster set to M-bM-^@M-^\noM-bM-^@M-^] (the
-             default).  These sessions will try to reuse the master instance's
-             network connection rather than initiating new ones, but will fall
-             back to connecting normally if the control socket does not exist,
-             or is not listening.
-
-             Setting this to M-bM-^@M-^\askM-bM-^@M-^] will cause ssh to listen for control
+             connection.  When set to yes, ssh(1) will listen for connections
+             on a control socket specified using the ControlPath argument.
+             Additional sessions can connect to this socket using the same
+             ControlPath with ControlMaster set to no (the default).  These
+             sessions will try to reuse the master instance's network
+             connection rather than initiating new ones, but will fall back to
+             connecting normally if the control socket does not exist, or is
+             not listening.
+
+             Setting this to ask will cause ssh(1) to listen for control
              connections, but require confirmation using ssh-askpass(1).  If
-             the ControlPath cannot be opened, ssh will continue without
+             the ControlPath cannot be opened, ssh(1) will continue without
              connecting to a master instance.
 
              X11 and ssh-agent(1) forwarding is supported over these
@@ -296,41 +284,35 @@ DESCRIPTION
 
              Two additional options allow for opportunistic multiplexing: try
              to use a master connection but fall back to creating a new one if
-             one does not already exist.  These options are: M-bM-^@M-^\autoM-bM-^@M-^] and
-             M-bM-^@M-^\autoaskM-bM-^@M-^].  The latter requires confirmation like the M-bM-^@M-^\askM-bM-^@M-^]
-             option.
+             one does not already exist.  These options are: auto and autoask.
+             The latter requires confirmation like the ask option.
 
      ControlPath
              Specify the path to the control socket used for connection
              sharing as described in the ControlMaster section above or the
-             string M-bM-^@M-^\noneM-bM-^@M-^] to disable connection sharing.  In the path, M-bM-^@M-^X%LM-bM-^@M-^Y
-             will be substituted by the first component of the local host
-             name, M-bM-^@M-^X%lM-bM-^@M-^Y will be substituted by the local host name (including
-             any domain name), M-bM-^@M-^X%hM-bM-^@M-^Y will be substituted by the target host
-             name, M-bM-^@M-^X%nM-bM-^@M-^Y will be substituted by the original target host name
-             specified on the command line, M-bM-^@M-^X%pM-bM-^@M-^Y the destination port, M-bM-^@M-^X%rM-bM-^@M-^Y by
-             the remote login username, M-bM-^@M-^X%uM-bM-^@M-^Y by the username and M-bM-^@M-^X%iM-bM-^@M-^Y by the
-             numeric user ID (uid) of the user running ssh(1), and M-bM-^@M-^X%CM-bM-^@M-^Y by a
-             hash of the concatenation: %l%h%p%r.  It is recommended that any
-             ControlPath used for opportunistic connection sharing include at
-             least %h, %p, and %r (or alternatively %C) and be placed in a
-             directory that is not writable by other users.  This ensures that
-             shared connections are uniquely identified.
+             string none to disable connection sharing.  Arguments to
+             ControlPath may use the tilde syntax to refer to a user's home
+             directory or the tokens described in the TOKENS section.  It is
+             recommended that any ControlPath used for opportunistic
+             connection sharing include at least %h, %p, and %r (or
+             alternatively %C) and be placed in a directory that is not
+             writable by other users.  This ensures that shared connections
+             are uniquely identified.
 
      ControlPersist
              When used in conjunction with ControlMaster, specifies that the
              master connection should remain open in the background (waiting
              for future client connections) after the initial client
-             connection has been closed.  If set to M-bM-^@M-^\noM-bM-^@M-^], then the master
+             connection has been closed.  If set to no, then the master
              connection will not be placed into the background, and will close
              as soon as the initial client connection is closed.  If set to
-             M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\0M-bM-^@M-^], then the master connection will remain in the
+             yes or 0, then the master connection will remain in the
              background indefinitely (until killed or closed via a mechanism
-             such as the ssh(1) M-bM-^@M-^\-O exitM-bM-^@M-^] option).  If set to a time in
-             seconds, or a time in any of the formats documented in
-             sshd_config(5), then the backgrounded master connection will
-             automatically terminate after it has remained idle (with no
-             client connections) for the specified time.
+             such as the "ssh -O exit").  If set to a time in seconds, or a
+             time in any of the formats documented in sshd_config(5), then the
+             backgrounded master connection will automatically terminate after
+             it has remained idle (with no client connections) for the
+             specified time.
 
      DynamicForward
              Specifies that a TCP port on the local machine be forwarded over
@@ -342,7 +324,7 @@ DESCRIPTION
              the local port is bound in accordance with the GatewayPorts
              setting.  However, an explicit bind_address may be used to bind
              the connection to a specific address.  The bind_address of
-             M-bM-^@M-^\localhostM-bM-^@M-^] indicates that the listening port be bound for local
+             localhost indicates that the listening port be bound for local
              use only, while an empty address or M-bM-^@M-^X*M-bM-^@M-^Y indicates that the port
              should be available from all interfaces.
 
@@ -352,17 +334,17 @@ DESCRIPTION
              line.  Only the superuser can forward privileged ports.
 
      EnableSSHKeysign
-             Setting this option to M-bM-^@M-^\yesM-bM-^@M-^] in the global client configuration
+             Setting this option to yes in the global client configuration
              file /etc/ssh/ssh_config enables the use of the helper program
              ssh-keysign(8) during HostbasedAuthentication.  The argument must
-             be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The default is M-bM-^@M-^\noM-bM-^@M-^].  This option should be
-             placed in the non-hostspecific section.  See ssh-keysign(8) for
-             more information.
+             be yes or no (the default).  This option should be placed in the
+             non-hostspecific section.  See ssh-keysign(8) for more
+             information.
 
      EscapeChar
              Sets the escape character (default: M-bM-^@M-^X~M-bM-^@M-^Y).  The escape character
              can also be set on the command line.  The argument should be a
-             single character, M-bM-^@M-^X^M-bM-^@M-^Y followed by a letter, or M-bM-^@M-^\noneM-bM-^@M-^] to disable
+             single character, M-bM-^@M-^X^M-bM-^@M-^Y followed by a letter, or none to disable
              the escape character entirely (making the connection transparent
              for binary data).
 
@@ -373,18 +355,17 @@ DESCRIPTION
              listen on a specified port).  Note that ExitOnForwardFailure does
              not apply to connections made over port forwardings and will not,
              for example, cause ssh(1) to exit if TCP connections to the
-             ultimate forwarding destination fail.  The argument must be M-bM-^@M-^\yesM-bM-^@M-^]
-             or M-bM-^@M-^\noM-bM-^@M-^].  The default is M-bM-^@M-^\noM-bM-^@M-^].
+             ultimate forwarding destination fail.  The argument must be yes
+             or no (the default).
 
      FingerprintHash
              Specifies the hash algorithm used when displaying key
-             fingerprints.  Valid options are: M-bM-^@M-^\md5M-bM-^@M-^] and M-bM-^@M-^\sha256M-bM-^@M-^].  The
-             default is M-bM-^@M-^\sha256M-bM-^@M-^].
+             fingerprints.  Valid options are: md5 and sha256 (the default).
 
      ForwardAgent
              Specifies whether the connection to the authentication agent (if
              any) will be forwarded to the remote machine.  The argument must
-             be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The default is M-bM-^@M-^\noM-bM-^@M-^].
+             be yes or no (the default).
 
              Agent forwarding should be enabled with caution.  Users with the
              ability to bypass file permissions on the remote host (for the
@@ -397,7 +378,7 @@ DESCRIPTION
      ForwardX11
              Specifies whether X11 connections will be automatically
              redirected over the secure channel and DISPLAY set.  The argument
-             must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The default is M-bM-^@M-^\noM-bM-^@M-^].
+             must be yes or no (the default).
 
              X11 forwarding should be enabled with caution.  Users with the
              ability to bypass file permissions on the remote host (for the
@@ -414,17 +395,15 @@ DESCRIPTION
              minutes has elapsed.
 
      ForwardX11Trusted
-             If this option is set to M-bM-^@M-^\yesM-bM-^@M-^], remote X11 clients will have full
+             If this option is set to yes, remote X11 clients will have full
              access to the original X11 display.
 
-             If this option is set to M-bM-^@M-^\noM-bM-^@M-^], remote X11 clients will be
-             considered untrusted and prevented from stealing or tampering
-             with data belonging to trusted X11 clients.  Furthermore, the
-             xauth(1) token used for the session will be set to expire after
-             20 minutes.  Remote clients will be refused access after this
-             time.
-
-             The default is M-bM-^@M-^\noM-bM-^@M-^].
+             If this option is set to no (the default), remote X11 clients
+             will be considered untrusted and prevented from stealing or
+             tampering with data belonging to trusted X11 clients.
+             Furthermore, the xauth(1) token used for the session will be set
+             to expire after 20 minutes.  Remote clients will be refused
+             access after this time.
 
              See the X11 SECURITY extension specification for full details on
              the restrictions imposed on untrusted clients.
@@ -436,8 +415,7 @@ DESCRIPTION
              connecting to forwarded ports.  GatewayPorts can be used to
              specify that ssh should bind local port forwardings to the
              wildcard address, thus allowing remote hosts to connect to
-             forwarded ports.  The argument must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The
-             default is M-bM-^@M-^\noM-bM-^@M-^].
+             forwarded ports.  The argument must be yes or no (the default).
 
      GlobalKnownHostsFile
              Specifies one or more files to use for the global host key
@@ -446,25 +424,24 @@ DESCRIPTION
 
      GSSAPIAuthentication
              Specifies whether user authentication based on GSSAPI is allowed.
-             The default is M-bM-^@M-^\noM-bM-^@M-^].
+             The default is no.
 
      GSSAPIDelegateCredentials
-             Forward (delegate) credentials to the server.  The default is
-             M-bM-^@M-^\noM-bM-^@M-^].
+             Forward (delegate) credentials to the server.  The default is no.
 
      HashKnownHosts
              Indicates that ssh(1) should hash host names and addresses when
              they are added to ~/.ssh/known_hosts.  These hashed names may be
              used normally by ssh(1) and sshd(8), but they do not reveal
              identifying information should the file's contents be disclosed.
-             The default is M-bM-^@M-^\noM-bM-^@M-^].  Note that existing names and addresses in
+             The default is no.  Note that existing names and addresses in
              known hosts files will not be converted automatically, but may be
              manually hashed using ssh-keygen(1).
 
      HostbasedAuthentication
              Specifies whether to try rhosts based authentication with public
-             key authentication.  The argument must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The
-             default is M-bM-^@M-^\noM-bM-^@M-^].
+             key authentication.  The argument must be yes or no (the
+             default).
 
      HostbasedKeyTypes
              Specifies the key types that will be used for hostbased
@@ -501,8 +478,8 @@ DESCRIPTION
              If hostkeys are known for the destination host then this default
              is modified to prefer their algorithms.
 
-             The list of available key types may also be obtained using the -Q
-             option of ssh(1) with an argument of M-bM-^@M-^\keyM-bM-^@M-^].
+             The list of available key types may also be obtained using "ssh
+             -Q key".
 
      HostKeyAlias
              Specifies an alias that should be used instead of the real host
@@ -512,41 +489,33 @@ DESCRIPTION
 
      HostName
              Specifies the real host name to log into.  This can be used to
-             specify nicknames or abbreviations for hosts.  If the hostname
-             contains the character sequence M-bM-^@M-^X%hM-bM-^@M-^Y, then this will be replaced
-             with the host name specified on the command line (this is useful
-             for manipulating unqualified names).  The character sequence M-bM-^@M-^X%%M-bM-^@M-^Y
-             will be replaced by a single M-bM-^@M-^X%M-bM-^@M-^Y character, which may be used
-             when specifying IPv6 link-local addresses.
-
-             The default is the name given on the command line.  Numeric IP
-             addresses are also permitted (both on the command line and in
-             HostName specifications).
+             specify nicknames or abbreviations for hosts.  Arguments to
+             HostName accept the tokens described in the TOKENS section.
+             Numeric IP addresses are also permitted (both on the command line
+             and in HostName specifications).  The default is the name given
+             on the command line.
 
      IdentitiesOnly
              Specifies that ssh(1) should only use the authentication identity
              and certificate files explicitly configured in the ssh_config
              files or passed on the ssh(1) command-line, even if ssh-agent(1)
              or a PKCS11Provider offers more identities.  The argument to this
-             keyword must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  This option is intended for
-             situations where ssh-agent offers many different identities.  The
-             default is M-bM-^@M-^\noM-bM-^@M-^].
+             keyword must be yes or no (the default).  This option is intended
+             for situations where ssh-agent offers many different identities.
 
      IdentityAgent
              Specifies the UNIX-domain socket used to communicate with the
              authentication agent.
 
-             This option overrides the M-bM-^@M-^\SSH_AUTH_SOCKM-bM-^@M-^] environment variable
-             and can be used to select a specific agent.  Setting the socket
-             name to M-bM-^@M-^\noneM-bM-^@M-^] disables the use of an authentication agent.  If
-             the string M-bM-^@M-^\SSH_AUTH_SOCKM-bM-^@M-^] is specified, the location of the
-             socket will be read from the SSH_AUTH_SOCK environment variable.
+             This option overrides the SSH_AUTH_SOCK environment variable and
+             can be used to select a specific agent.  Setting the socket name
+             to none disables the use of an authentication agent.  If the
+             string "SSH_AUTH_SOCK" is specified, the location of the socket
+             will be read from the SSH_AUTH_SOCK environment variable.
 
-             The socket name may use the tilde syntax to refer to a user's
-             home directory or one of the following escape characters: M-bM-^@M-^X%dM-bM-^@M-^Y
-             (local user's home directory), M-bM-^@M-^X%uM-bM-^@M-^Y (local user name), M-bM-^@M-^X%lM-bM-^@M-^Y
-             (local host name), M-bM-^@M-^X%hM-bM-^@M-^Y (remote host name) or M-bM-^@M-^X%rM-bM-^@M-^Y (remote user
-             name).
+             Arguments to IdentityAgent may use the tilde syntax to refer to a
+             user's home directory or the tokens described in the TOKENS
+             section.
 
      IdentityFile
              Specifies a file from which the user's DSA, ECDSA, Ed25519 or RSA
@@ -560,10 +529,9 @@ DESCRIPTION
              from the filename obtained by appending -cert.pub to the path of
              a specified IdentityFile.
 
-             The file name may use the tilde syntax to refer to a user's home
-             directory or one of the following escape characters: M-bM-^@M-^X%dM-bM-^@M-^Y (local
-             user's home directory), M-bM-^@M-^X%uM-bM-^@M-^Y (local user name), M-bM-^@M-^X%lM-bM-^@M-^Y (local host
-             name), M-bM-^@M-^X%hM-bM-^@M-^Y (remote host name) or M-bM-^@M-^X%rM-bM-^@M-^Y (remote user name).
+             Arguments to IdentityFile may use the tilde syntax to refer to a
+             user's home directory or the tokens described in the TOKENS
+             section.
 
              It is possible to have multiple identity files specified in
              configuration files; all these identities will be tried in
@@ -588,7 +556,7 @@ DESCRIPTION
      Include
              Include the specified configuration file(s).  Multiple pathnames
              may be specified and each pathname may contain glob(3) wildcards
-             and, for user configurations, shell-like M-bM-^@M-^\~M-bM-^@M-^] references to user
+             and, for user configurations, shell-like M-bM-^@M-^X~M-bM-^@M-^Y references to user
              home directories.  Files without absolute paths are assumed to be
              in ~/.ssh if included in a user configuration file or /etc/ssh if
              included from the system configuration file.  Include directive
@@ -596,30 +564,27 @@ DESCRIPTION
              inclusion.
 
      IPQoS   Specifies the IPv4 type-of-service or DSCP class for connections.
-             Accepted values are M-bM-^@M-^\af11M-bM-^@M-^], M-bM-^@M-^\af12M-bM-^@M-^], M-bM-^@M-^\af13M-bM-^@M-^], M-bM-^@M-^\af21M-bM-^@M-^], M-bM-^@M-^\af22M-bM-^@M-^],
-             M-bM-^@M-^\af23M-bM-^@M-^], M-bM-^@M-^\af31M-bM-^@M-^], M-bM-^@M-^\af32M-bM-^@M-^], M-bM-^@M-^\af33M-bM-^@M-^], M-bM-^@M-^\af41M-bM-^@M-^], M-bM-^@M-^\af42M-bM-^@M-^], M-bM-^@M-^\af43M-bM-^@M-^], M-bM-^@M-^\cs0M-bM-^@M-^],
-             M-bM-^@M-^\cs1M-bM-^@M-^], M-bM-^@M-^\cs2M-bM-^@M-^], M-bM-^@M-^\cs3M-bM-^@M-^], M-bM-^@M-^\cs4M-bM-^@M-^], M-bM-^@M-^\cs5M-bM-^@M-^], M-bM-^@M-^\cs6M-bM-^@M-^], M-bM-^@M-^\cs7M-bM-^@M-^], M-bM-^@M-^\efM-bM-^@M-^],
-             M-bM-^@M-^\lowdelayM-bM-^@M-^], M-bM-^@M-^\throughputM-bM-^@M-^], M-bM-^@M-^\reliabilityM-bM-^@M-^], or a numeric value.
+             Accepted values are af11, af12, af13, af21, af22, af23, af31,
+             af32, af33, af41, af42, af43, cs0, cs1, cs2, cs3, cs4, cs5, cs6,
+             cs7, ef, lowdelay, throughput, reliability, or a numeric value.
              This option may take one or two arguments, separated by
              whitespace.  If one argument is specified, it is used as the
              packet class unconditionally.  If two values are specified, the
              first is automatically selected for interactive sessions and the
-             second for non-interactive sessions.  The default is M-bM-^@M-^\lowdelayM-bM-^@M-^]
-             for interactive sessions and M-bM-^@M-^\throughputM-bM-^@M-^] for non-interactive
-             sessions.
+             second for non-interactive sessions.  The default is lowdelay for
+             interactive sessions and throughput for non-interactive sessions.
 
      KbdInteractiveAuthentication
              Specifies whether to use keyboard-interactive authentication.
-             The argument to this keyword must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The default
-             is M-bM-^@M-^\yesM-bM-^@M-^].
+             The argument to this keyword must be yes (the default) or no.
 
      KbdInteractiveDevices
              Specifies the list of methods to use in keyboard-interactive
              authentication.  Multiple method names must be comma-separated.
              The default is to use the server specified list.  The methods
              available vary depending on what the server supports.  For an
-             OpenSSH server, it may be zero or more of: M-bM-^@M-^\bsdauthM-bM-^@M-^], M-bM-^@M-^\pamM-bM-^@M-^], and
-             M-bM-^@M-^\skeyM-bM-^@M-^].
+             OpenSSH server, it may be zero or more of: bsdauth, pam, and
+             skey.
 
      KexAlgorithms
              Specifies the available KEX (Key Exchange) algorithms.  Multiple
@@ -628,25 +593,21 @@ DESCRIPTION
              will be appended to the default set instead of replacing them.
              The default is:
 
-                   curve25519-sha256@libssh.org,
+                   curve25519-sha256,curve25519-sha256@libssh.org,
                    ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,
                    diffie-hellman-group-exchange-sha256,
                    diffie-hellman-group-exchange-sha1,
                    diffie-hellman-group14-sha1
 
              The list of available key exchange algorithms may also be
-             obtained using the -Q option of ssh(1) with an argument of M-bM-^@M-^\kexM-bM-^@M-^].
+             obtained using "ssh -Q kex".
 
      LocalCommand
              Specifies a command to execute on the local machine after
              successfully connecting to the server.  The command string
              extends to the end of the line, and is executed with the user's
-             shell.  The following escape character substitutions will be
-             performed: M-bM-^@M-^X%dM-bM-^@M-^Y (local user's home directory), M-bM-^@M-^X%hM-bM-^@M-^Y (remote host
-             name), M-bM-^@M-^X%lM-bM-^@M-^Y (local host name), M-bM-^@M-^X%nM-bM-^@M-^Y (host name as provided on the
-             command line), M-bM-^@M-^X%pM-bM-^@M-^Y (remote port), M-bM-^@M-^X%rM-bM-^@M-^Y (remote user name) or
-             M-bM-^@M-^X%uM-bM-^@M-^Y (local user name) or M-bM-^@M-^X%CM-bM-^@M-^Y by a hash of the concatenation:
-             %l%h%p%r.
+             shell.  Arguments to LocalCommand accept the tokens described in
+             the TOKENS section.
 
              The command is run synchronously and does not have access to the
              session of the ssh(1) that spawned it.  It should not be used for
@@ -666,7 +627,7 @@ DESCRIPTION
              privileged ports.  By default, the local port is bound in
              accordance with the GatewayPorts setting.  However, an explicit
              bind_address may be used to bind the connection to a specific
-             address.  The bind_address of M-bM-^@M-^\localhostM-bM-^@M-^] indicates that the
+             address.  The bind_address of localhost indicates that the
              listening port be bound for local use only, while an empty
              address or M-bM-^@M-^X*M-bM-^@M-^Y indicates that the port should be available from
              all interfaces.
@@ -685,7 +646,7 @@ DESCRIPTION
              then the specified algorithms will be appended to the default set
              instead of replacing them.
 
-             The algorithms that contain M-bM-^@M-^\-etmM-bM-^@M-^] calculate the MAC after
+             The algorithms that contain "-etm" calculate the MAC after
              encryption (encrypt-then-mac).  These are considered safer and
              their use recommended.
 
@@ -698,7 +659,7 @@ DESCRIPTION
                    hmac-sha2-256,hmac-sha2-512,hmac-sha1
 
              The list of available MAC algorithms may also be obtained using
-             the -Q option of ssh(1) with an argument of M-bM-^@M-^\macM-bM-^@M-^].
+             "ssh -Q mac".
 
      NoHostAuthenticationForLocalhost
              This option can be used if the home directory is shared across
@@ -706,8 +667,7 @@ DESCRIPTION
              machine on each of the machines and the user will get many
              warnings about changed host keys.  However, this option disables
              host authentication for localhost.  The argument to this keyword
-             must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The default is to check the host key for
-             localhost.
+             must be yes or no.  (the default).
 
      NumberOfPasswordPrompts
              Specifies the number of password prompts before giving up.  The
@@ -715,12 +675,12 @@ DESCRIPTION
 
      PasswordAuthentication
              Specifies whether to use password authentication.  The argument
-             to this keyword must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The default is M-bM-^@M-^\yesM-bM-^@M-^].
+             to this keyword must be yes (the default) or no.
 
      PermitLocalCommand
              Allow local command execution via the LocalCommand option or
              using the !command escape sequence in ssh(1).  The argument must
-             be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The default is M-bM-^@M-^\noM-bM-^@M-^].
+             be yes or no (the default).
 
      PKCS11Provider
              Specifies which PKCS#11 provider to use.  The argument to this
@@ -742,12 +702,12 @@ DESCRIPTION
 
      Protocol
              Specifies the protocol versions ssh(1) should support in order of
-             preference.  The possible values are M-bM-^@M-^X1M-bM-^@M-^Y and M-bM-^@M-^X2M-bM-^@M-^Y.  Multiple
-             versions must be comma-separated.  When this option is set to
-             M-bM-^@M-^\2,1M-bM-^@M-^] ssh will try version 2 and fall back to version 1 if
-             version 2 is not available.  The default is M-bM-^@M-^X2M-bM-^@M-^Y.  Protocol 1
-             suffers from a number of cryptographic weaknesses and should not
-             be used.  It is only offered to support legacy devices.
+             preference.  The possible values are 1 and 2.  Multiple versions
+             must be comma-separated.  When this option is set to 2,1 ssh will
+             try version 2 and fall back to version 1 if version 2 is not
+             available.  The default is version 2.  Protocol 1 suffers from a
+             number of cryptographic weaknesses and should not be used.  It is
+             only offered to support legacy devices.
 
      ProxyCommand
              Specifies the command to use to connect to the server.  The
@@ -755,15 +715,14 @@ DESCRIPTION
              using the user's shell M-bM-^@M-^XexecM-bM-^@M-^Y directive to avoid a lingering
              shell process.
 
-             In the command string, any occurrence of M-bM-^@M-^X%hM-bM-^@M-^Y will be substituted
-             by the host name to connect, M-bM-^@M-^X%pM-bM-^@M-^Y by the port, and M-bM-^@M-^X%rM-bM-^@M-^Y by the
-             remote user name.  The command can be basically anything, and
+             Arguments to ProxyCommand accept the tokens described in the
+             TOKENS section.  The command can be basically anything, and
              should read from its standard input and write to its standard
              output.  It should eventually connect an sshd(8) server running
              on some machine, or execute sshd -i somewhere.  Host key
              management will be done using the HostName of the host being
              connected (defaulting to the name typed by the user).  Setting
-             the command to M-bM-^@M-^\noneM-bM-^@M-^] disables this option entirely.  Note that
+             the command to none disables this option entirely.  Note that
              CheckHostIP is not available for connects with a proxy command.
 
              This directive is useful in conjunction with nc(1) and its proxy
@@ -787,7 +746,7 @@ DESCRIPTION
      ProxyUseFdpass
              Specifies that ProxyCommand will pass a connected file descriptor
              back to ssh(1) instead of continuing to execute and pass data.
-             The default is M-bM-^@M-^\noM-bM-^@M-^].
+             The default is no.
 
      PubkeyAcceptedKeyTypes
              Specifies the key types that will be used for public key
@@ -804,11 +763,12 @@ DESCRIPTION
                 ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
                 ssh-ed25519,ssh-rsa
 
-             The -Q option of ssh(1) may be used to list supported key types.
+             The list of available key types may also be obtained using "ssh
+             -Q key".
 
      PubkeyAuthentication
              Specifies whether to try public key authentication.  The argument
-             to this keyword must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The default is M-bM-^@M-^\yesM-bM-^@M-^].
+             to this keyword must be yes (the default) or no.
 
      RekeyLimit
              Specifies the maximum amount of data that may be transmitted
@@ -820,7 +780,7 @@ DESCRIPTION
              M-bM-^@M-^X1GM-bM-^@M-^Y and M-bM-^@M-^X4GM-bM-^@M-^Y, depending on the cipher.  The optional second
              value is specified in seconds and may use any of the units
              documented in the TIME FORMATS section of sshd_config(5).  The
-             default value for RekeyLimit is M-bM-^@M-^\default noneM-bM-^@M-^], which means that
+             default value for RekeyLimit is default none, which means that
              rekeying is performed after the cipher's default amount of data
              has been sent or received and no time based rekeying is done.
 
@@ -834,7 +794,7 @@ DESCRIPTION
              given on the command line.  Privileged ports can be forwarded
              only when logging in as root on the remote machine.
 
-             If the port argument is M-bM-^@M-^X0M-bM-^@M-^Y, the listen port will be dynamically
+             If the port argument is 0, the listen port will be dynamically
              allocated on the server and reported to the client at run time.
 
              If the bind_address is not specified, the default is to only bind
@@ -846,9 +806,9 @@ DESCRIPTION
 
      RequestTTY
              Specifies whether to request a pseudo-tty for the session.  The
-             argument may be one of: M-bM-^@M-^\noM-bM-^@M-^] (never request a TTY), M-bM-^@M-^\yesM-bM-^@M-^] (always
-             request a TTY when standard input is a TTY), M-bM-^@M-^\forceM-bM-^@M-^] (always
-             request a TTY) or M-bM-^@M-^\autoM-bM-^@M-^] (request a TTY when opening a login
+             argument may be one of: no (never request a TTY), yes (always
+             request a TTY when standard input is a TTY), force (always
+             request a TTY) or auto (request a TTY when opening a login
              session).  This option mirrors the -t and -T flags for ssh(1).
 
      RevokedHostKeys
@@ -862,16 +822,16 @@ DESCRIPTION
 
      RhostsRSAAuthentication
              Specifies whether to try rhosts based authentication with RSA
-             host authentication.  The argument must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The
-             default is M-bM-^@M-^\noM-bM-^@M-^].  This option applies to protocol version 1 only
-             and requires ssh(1) to be setuid root.
+             host authentication.  The argument must be yes or no (the
+             default).  This option applies to protocol version 1 only and
+             requires ssh(1) to be setuid root.
 
      RSAAuthentication
              Specifies whether to try RSA authentication.  The argument to
-             this keyword must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  RSA authentication will only
-             be attempted if the identity file exists, or an authentication
-             agent is running.  The default is M-bM-^@M-^\yesM-bM-^@M-^].  Note that this option
-             applies to protocol version 1 only.
+             this keyword must be yes (the default) or no.  RSA authentication
+             will only be attempted if the identity file exists, or an
+             authentication agent is running.  Note that this option applies
+             to protocol version 1 only.
 
      SendEnv
              Specifies what variables from the local environ(7) should be sent
@@ -932,24 +892,23 @@ DESCRIPTION
              domain socket file.  This option is only used for port forwarding
              to a Unix-domain socket file.
 
-             The argument must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The default is M-bM-^@M-^\noM-bM-^@M-^].
+             The argument must be yes or no (the default).
 
      StrictHostKeyChecking
-             If this flag is set to M-bM-^@M-^\yesM-bM-^@M-^], ssh(1) will never automatically add
+             If this flag is set to yes, ssh(1) will never automatically add
              host keys to the ~/.ssh/known_hosts file, and refuses to connect
              to hosts whose host key has changed.  This provides maximum
              protection against trojan horse attacks, though it can be
              annoying when the /etc/ssh/ssh_known_hosts file is poorly
              maintained or when connections to new hosts are frequently made.
              This option forces the user to manually add all new hosts.  If
-             this flag is set to M-bM-^@M-^\noM-bM-^@M-^], ssh will automatically add new host
-             keys to the user known hosts files.  If this flag is set to
-             M-bM-^@M-^\askM-bM-^@M-^], new host keys will be added to the user known host files
-             only after the user has confirmed that is what they really want
-             to do, and ssh will refuse to connect to hosts whose host key has
-             changed.  The host keys of known hosts will be verified
-             automatically in all cases.  The argument must be M-bM-^@M-^\yesM-bM-^@M-^], M-bM-^@M-^\noM-bM-^@M-^], or
-             M-bM-^@M-^\askM-bM-^@M-^].  The default is M-bM-^@M-^\askM-bM-^@M-^].
+             this flag is set to no, ssh will automatically add new host keys
+             to the user known hosts files.  If this flag is set to ask (the
+             default), new host keys will be added to the user known host
+             files only after the user has confirmed that is what they really
+             want to do, and ssh will refuse to connect to hosts whose host
+             key has changed.  The host keys of known hosts will be verified
+             automatically in all cases.
 
      TCPKeepAlive
              Specifies whether the system should send TCP keepalive messages
@@ -958,53 +917,50 @@ DESCRIPTION
              this means that connections will die if the route is down
              temporarily, and some people find it annoying.
 
-             The default is M-bM-^@M-^\yesM-bM-^@M-^] (to send TCP keepalive messages), and the
+             The default is yes (to send TCP keepalive messages), and the
              client will notice if the network goes down or the remote host
              dies.  This is important in scripts, and many users want it too.
 
-             To disable TCP keepalive messages, the value should be set to
-             M-bM-^@M-^\noM-bM-^@M-^].
+             To disable TCP keepalive messages, the value should be set to no.
 
      Tunnel  Request tun(4) device forwarding between the client and the
-             server.  The argument must be M-bM-^@M-^\yesM-bM-^@M-^], M-bM-^@M-^\point-to-pointM-bM-^@M-^] (layer 3),
-             M-bM-^@M-^\ethernetM-bM-^@M-^] (layer 2), or M-bM-^@M-^\noM-bM-^@M-^].  Specifying M-bM-^@M-^\yesM-bM-^@M-^] requests the
-             default tunnel mode, which is M-bM-^@M-^\point-to-pointM-bM-^@M-^].  The default is
-             M-bM-^@M-^\noM-bM-^@M-^].
+             server.  The argument must be yes, point-to-point (layer 3),
+             ethernet (layer 2), or no (the default).  Specifying yes requests
+             the default tunnel mode, which is point-to-point.
 
      TunnelDevice
              Specifies the tun(4) devices to open on the client (local_tun)
              and the server (remote_tun).
 
              The argument must be local_tun[:remote_tun].  The devices may be
-             specified by numerical ID or the keyword M-bM-^@M-^\anyM-bM-^@M-^], which uses the
-             next available tunnel device.  If remote_tun is not specified, it
-             defaults to M-bM-^@M-^\anyM-bM-^@M-^].  The default is M-bM-^@M-^\any:anyM-bM-^@M-^].
+             specified by numerical ID or the keyword any, which uses the next
+             available tunnel device.  If remote_tun is not specified, it
+             defaults to any.  The default is any:any.
 
      UpdateHostKeys
              Specifies whether ssh(1) should accept notifications of
              additional hostkeys from the server sent after authentication has
              completed and add them to UserKnownHostsFile.  The argument must
-             be M-bM-^@M-^\yesM-bM-^@M-^], M-bM-^@M-^\noM-bM-^@M-^] (the default) or M-bM-^@M-^\askM-bM-^@M-^].  Enabling this option
-             allows learning alternate hostkeys for a server and supports
-             graceful key rotation by allowing a server to send replacement
-             public keys before old ones are removed.  Additional hostkeys are
-             only accepted if the key used to authenticate the host was
-             already trusted or explicitly accepted by the user.  If
-             UpdateHostKeys is set to M-bM-^@M-^\askM-bM-^@M-^], then the user is asked to confirm
-             the modifications to the known_hosts file.  Confirmation is
-             currently incompatible with ControlPersist, and will be disabled
-             if it is enabled.
+             be yes, no (the default) or ask.  Enabling this option allows
+             learning alternate hostkeys for a server and supports graceful
+             key rotation by allowing a server to send replacement public keys
+             before old ones are removed.  Additional hostkeys are only
+             accepted if the key used to authenticate the host was already
+             trusted or explicitly accepted by the user.  If UpdateHostKeys is
+             set to ask, then the user is asked to confirm the modifications
+             to the known_hosts file.  Confirmation is currently incompatible
+             with ControlPersist, and will be disabled if it is enabled.
 
              Presently, only sshd(8) from OpenSSH 6.8 and greater support the
-             M-bM-^@M-^\hostkeys@openssh.comM-bM-^@M-^] protocol extension used to inform the
+             "hostkeys@openssh.com" protocol extension used to inform the
              client of all the server's hostkeys.
 
      UsePrivilegedPort
              Specifies whether to use a privileged port for outgoing
-             connections.  The argument must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^].  The default is
-             M-bM-^@M-^\noM-bM-^@M-^].  If set to M-bM-^@M-^\yesM-bM-^@M-^], ssh(1) must be setuid root.  Note that
-             this option must be set to M-bM-^@M-^\yesM-bM-^@M-^] for RhostsRSAAuthentication with
-             older servers.
+             connections.  The argument must be yes or no (the default).  If
+             set to yes, ssh(1) must be setuid root.  Note that this option
+             must be set to yes for RhostsRSAAuthentication with older
+             servers.
 
      User    Specifies the user to log in as.  This can be useful when a
              different user name is used on different machines.  This saves
@@ -1018,24 +974,23 @@ DESCRIPTION
 
      VerifyHostKeyDNS
              Specifies whether to verify the remote key using DNS and SSHFP
-             resource records.  If this option is set to M-bM-^@M-^\yesM-bM-^@M-^], the client
-             will implicitly trust keys that match a secure fingerprint from
-             DNS.  Insecure fingerprints will be handled as if this option was
-             set to M-bM-^@M-^\askM-bM-^@M-^].  If this option is set to M-bM-^@M-^\askM-bM-^@M-^], information on
-             fingerprint match will be displayed, but the user will still need
-             to confirm new host keys according to the StrictHostKeyChecking
-             option.  The argument must be M-bM-^@M-^\yesM-bM-^@M-^], M-bM-^@M-^\noM-bM-^@M-^], or M-bM-^@M-^\askM-bM-^@M-^].  The default
-             is M-bM-^@M-^\noM-bM-^@M-^].
+             resource records.  If this option is set to yes, the client will
+             implicitly trust keys that match a secure fingerprint from DNS.
+             Insecure fingerprints will be handled as if this option was set
+             to ask.  If this option is set to ask, information on fingerprint
+             match will be displayed, but the user will still need to confirm
+             new host keys according to the StrictHostKeyChecking option.  The
+             default is no.
 
              See also VERIFYING HOST KEYS in ssh(1).
 
      VisualHostKey
-             If this flag is set to M-bM-^@M-^\yesM-bM-^@M-^], an ASCII art representation of the
+             If this flag is set to yes, an ASCII art representation of the
              remote host key fingerprint is printed in addition to the
              fingerprint string at login and for unknown host keys.  If this
-             flag is set to M-bM-^@M-^\noM-bM-^@M-^], no fingerprint strings are printed at login
-             and only the fingerprint string will be printed for unknown host
-             keys.  The default is M-bM-^@M-^\noM-bM-^@M-^].
+             flag is set to no (the default), no fingerprint strings are
+             printed at login and only the fingerprint string will be printed
+             for unknown host keys.
 
      XAuthLocation
              Specifies the full pathname of the xauth(1) program.  The default
@@ -1045,7 +1000,7 @@ PATTERNS
      A pattern consists of zero or more non-whitespace characters, M-bM-^@M-^X*M-bM-^@M-^Y (a
      wildcard that matches zero or more characters), or M-bM-^@M-^X?M-bM-^@M-^Y (a wildcard that
      matches exactly one character).  For example, to specify a set of
-     declarations for any host in the M-bM-^@M-^\.co.ukM-bM-^@M-^] set of domains, the following
+     declarations for any host in the ".co.uk" set of domains, the following
      pattern could be used:
 
            Host *.co.uk
@@ -1058,11 +1013,43 @@ PATTERNS
      A pattern-list is a comma-separated list of patterns.  Patterns within
      pattern-lists may be negated by preceding them with an exclamation mark
      (M-bM-^@M-^X!M-bM-^@M-^Y).  For example, to allow a key to be used from anywhere within an
-     organization except from the M-bM-^@M-^\dialupM-bM-^@M-^] pool, the following entry (in
+     organization except from the "dialup" pool, the following entry (in
      authorized_keys) could be used:
 
            from="!*.dialup.example.com,*.example.com"
 
+TOKENS
+     Arguments to some keywords can make use of tokens, which are expanded at
+     runtime:
+
+           %%    A literal M-bM-^@M-^X%M-bM-^@M-^Y.
+           %C    Shorthand for %l%h%p%r.
+           %d    Local user's home directory.
+           %h    The remote hostname.
+           %i    The local user ID.
+           %L    The local hostname.
+           %l    The local hostname, including the domain name.
+           %n    The original remote hostname, as given on the command line.
+           %p    The remote port.
+           %r    The remote username.
+           %u    The local username.
+
+     Match exec accepts the tokens %%, %h, %L, %l, %n, %p, %r, and %u.
+
+     CertificateFile accepts the tokens %%, %d, %h, %l, %r, and %u.
+
+     ControlPath accepts the tokens %%, %C, %h, %i, %L, %l, %n, %p, %r, and
+     %u.
+
+     HostName accepts the tokens %% and %h.
+
+     IdentityAgent and IdentityFile accept the tokens %%, %d, %h, %l, %r, and
+     %u.
+
+     LocalCommand accepts the tokens %%, %C, %d, %h, %l, %n, %p, %r, and %u.
+
+     ProxyCommand accepts the tokens %%, %h, %p, and %r.
+
 FILES
      ~/.ssh/config
              This is the per-user configuration file.  The format of this file
@@ -1087,4 +1074,4 @@ AUTHORS
      created OpenSSH.  Markus Friedl contributed the support for SSH protocol
      versions 1.5 and 2.0.
 
-OpenBSD 6.0                      July 22, 2016                     OpenBSD 6.0
+OpenBSD 6.0                    October 15, 2016                    OpenBSD 6.0