Import OpenSSH 5.1p1.

1 files changed, 665 insertions, 0 deletions

diff --git a/ssh_config.0 b/ssh_config.0
new file mode 100644
index 000000000..e2e645854
--- /dev/null
+++ b/ssh_config.0
@@ -0,0 +1,665 @@
+SSH_CONFIG(5)             OpenBSD Programmer's Manual            SSH_CONFIG(5)
+
+NAME
+     ssh_config - OpenSSH SSH client configuration files
+
+SYNOPSIS
+     ~/.ssh/config
+     /etc/ssh/ssh_config
+
+DESCRIPTION
+     ssh(1) obtains configuration data from the following sources in the fol-
+     lowing order:
+
+           1.   command-line options
+           2.   user's configuration file (~/.ssh/config)
+           3.   system-wide configuration file (/etc/ssh/ssh_config)
+
+     For each parameter, the first obtained value will be used.  The configu-
+     ration files contain sections separated by ``Host'' specifications, and
+     that section is only applied for hosts that match one of the patterns
+     given in the specification.  The matched host name is the one given on
+     the command line.
+
+     Since the first obtained value for each parameter is used, more host-spe-
+     cific declarations should be given near the beginning of the file, and
+     general defaults at the end.
+
+     The configuration file has the following format:
+
+     Empty lines and lines starting with `#' are comments.  Otherwise a line
+     is of the format ``keyword arguments''.  Configuration options may be
+     separated by whitespace or optional whitespace and exactly one `='; the
+     latter format is useful to avoid the need to quote whitespace when speci-
+     fying configuration options using the ssh, scp, and sftp -o option.  Ar-
+     guments may optionally be enclosed in double quotes (") in order to rep-
+     resent arguments containing spaces.
+
+     The possible keywords and their meanings are as follows (note that key-
+     words are case-insensitive and arguments are case-sensitive):
+
+     Host    Restricts the following declarations (up to the next Host key-
+             word) to be only for those hosts that match one of the patterns
+             given after the keyword.  If more than one pattern is provided,
+             they should be separated by whitepsace.  A single `*' as a pat-
+             tern can be used to provide global defaults for all hosts.  The
+             host is the hostname argument given on the command line (i.e. the
+             name is not converted to a canonicalized host name before match-
+             ing).
+
+             See PATTERNS for more information on patterns.
+
+     AddressFamily
+             Specifies which address family to use when connecting.  Valid ar-
+             guments are ``any'', ``inet'' (use IPv4 only), or ``inet6'' (use
+             IPv6 only).
+
+     BatchMode
+             If set to ``yes'', passphrase/password querying will be disabled.
+             This option is useful in scripts and other batch jobs where no
+             user is present to supply the password.  The argument must be
+             ``yes'' or ``no''.  The default is ``no''.
+
+     BindAddress
+             Use the specified address on the local machine as the source ad-
+             dress of the connection.  Only useful on systems with more than
+             one address.  Note that this option does not work if
+             UsePrivilegedPort is set to ``yes''.
+
+     ChallengeResponseAuthentication
+             Specifies whether to use challenge-response authentication.  The
+             argument to this keyword must be ``yes'' or ``no''.  The default
+             is ``yes''.
+
+     CheckHostIP
+             If this flag is set to ``yes'', ssh(1) will additionally check
+             the host IP address in the known_hosts file.  This allows ssh to
+             detect if a host key changed due to DNS spoofing.  If the option
+             is set to ``no'', the check will not be executed.  The default is
+             ``yes''.
+
+     Cipher  Specifies the cipher to use for encrypting the session in proto-
+             col version 1.  Currently, ``blowfish'', ``3des'', and ``des''
+             are supported.  des is only supported in the ssh(1) client for
+             interoperability with legacy protocol 1 implementations that do
+             not support the 3des cipher.  Its use is strongly discouraged due
+             to cryptographic weaknesses.  The default is ``3des''.
+
+     Ciphers
+             Specifies the ciphers allowed for protocol version 2 in order of
+             preference.  Multiple ciphers must be comma-separated.  The sup-
+             ported ciphers are ``3des-cbc'', ``aes128-cbc'', ``aes192-cbc'',
+             ``aes256-cbc'', ``aes128-ctr'', ``aes192-ctr'', ``aes256-ctr'',
+             ``arcfour128'', ``arcfour256'', ``arcfour'', ``blowfish-cbc'',
+             and ``cast128-cbc''.  The default is:
+
+                aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,
+                arcfour256,arcfour,aes192-cbc,aes256-cbc,aes128-ctr,
+                aes192-ctr,aes256-ctr
+
+     ClearAllForwardings
+             Specifies that all local, remote, and dynamic port forwardings
+             specified in the configuration files or on the command line be
+             cleared.  This option is primarily useful when used from the
+             ssh(1) command line to clear port forwardings set in configura-
+             tion files, and is automatically set by scp(1) and sftp(1).  The
+             argument must be ``yes'' or ``no''.  The default is ``no''.
+
+     Compression
+             Specifies whether to use compression.  The argument must be
+             ``yes'' or ``no''.  The default is ``no''.
+
+     CompressionLevel
+             Specifies the compression level to use if compression is enabled.
+             The argument must be an integer from 1 (fast) to 9 (slow, best).
+             The default level is 6, which is good for most applications.  The
+             meaning of the values is the same as in gzip(1).  Note that this
+             option applies to protocol version 1 only.
+
+     ConnectionAttempts
+             Specifies the number of tries (one per second) to make before ex-
+             iting.  The argument must be an integer.  This may be useful in
+             scripts if the connection sometimes fails.  The default is 1.
+
+     ConnectTimeout
+             Specifies the timeout (in seconds) used when connecting to the
+             SSH server, instead of using the default system TCP timeout.
+             This value is used only when the target is down or really un-
+             reachable, not when it refuses the connection.
+
+     ControlMaster
+             Enables the sharing of multiple sessions over a single network
+             connection.  When set to ``yes'', ssh(1) will listen for connec-
+             tions on a control socket specified using the ControlPath argu-
+             ment.  Additional sessions can connect to this socket using the
+             same ControlPath with ControlMaster set to ``no'' (the default).
+             These sessions will try to reuse the master instance's network
+             connection rather than initiating new ones, but will fall back to
+             connecting normally if the control socket does not exist, or is
+             not listening.
+
+             Setting this to ``ask'' will cause ssh to listen for control con-
+             nections, but require confirmation using the SSH_ASKPASS program
+             before they are accepted (see ssh-add(1) for details).  If the
+             ControlPath cannot be opened, ssh will continue without connect-
+             ing to a master instance.
+
+             X11 and ssh-agent(1) forwarding is supported over these multi-
+             plexed connections, however the display and agent forwarded will
+             be the one belonging to the master connection i.e. it is not pos-
+             sible to forward multiple displays or agents.
+
+             Two additional options allow for opportunistic multiplexing: try
+             to use a master connection but fall back to creating a new one if
+             one does not already exist.  These options are: ``auto'' and
+             ``autoask''.  The latter requires confirmation like the ``ask''
+             option.
+
+     ControlPath
+             Specify the path to the control socket used for connection shar-
+             ing as described in the ControlMaster section above or the string
+             ``none'' to disable connection sharing.  In the path, `%l' will
+             be substituted by the local host name, `%h' will be substituted
+             by the target host name, `%p' the port, and `%r' by the remote
+             login username.  It is recommended that any ControlPath used for
+             opportunistic connection sharing include at least %h, %p, and %r.
+             This ensures that shared connections are uniquely identified.
+
+     DynamicForward
+             Specifies that a TCP port on the local machine be forwarded over
+             the secure channel, and the application protocol is then used to
+             determine where to connect to from the remote machine.
+
+             The argument must be [bind_address:]port.  IPv6 addresses can be
+             specified by enclosing addresses in square brackets or by using
+             an alternative syntax: [bind_address/]port.  By default, the lo-
+             cal port is bound in accordance with the GatewayPorts setting.
+             However, an explicit bind_address may be used to bind the connec-
+             tion to a specific address.  The bind_address of ``localhost''
+             indicates that the listening port be bound for local use only,
+             while an empty address or `*' indicates that the port should be
+             available from all interfaces.
+
+             Currently the SOCKS4 and SOCKS5 protocols are supported, and
+             ssh(1) will act as a SOCKS server.  Multiple forwardings may be
+             specified, and additional forwardings can be given on the command
+             line.  Only the superuser can forward privileged ports.
+
+     EnableSSHKeysign
+             Setting this option to ``yes'' in the global client configuration
+             file /etc/ssh/ssh_config enables the use of the helper program
+             ssh-keysign(8) during HostbasedAuthentication.  The argument must
+             be ``yes'' or ``no''.  The default is ``no''.  This option should
+             be placed in the non-hostspecific section.  See ssh-keysign(8)
+             for more information.
+
+     EscapeChar
+             Sets the escape character (default: `~').  The escape character
+             can also be set on the command line.  The argument should be a
+             single character, `^' followed by a letter, or ``none'' to dis-
+             able the escape character entirely (making the connection trans-
+             parent for binary data).
+
+     ExitOnForwardFailure
+             Specifies whether ssh(1) should terminate the connection if it
+             cannot set up all requested dynamic, tunnel, local, and remote
+             port forwardings.  The argument must be ``yes'' or ``no''.  The
+             default is ``no''.
+
+     ForwardAgent
+             Specifies whether the connection to the authentication agent (if
+             any) will be forwarded to the remote machine.  The argument must
+             be ``yes'' or ``no''.  The default is ``no''.
+
+             Agent forwarding should be enabled with caution.  Users with the
+             ability to bypass file permissions on the remote host (for the
+             agent's Unix-domain socket) can access the local agent through
+             the forwarded connection.  An attacker cannot obtain key material
+             from the agent, however they can perform operations on the keys
+             that enable them to authenticate using the identities loaded into
+             the agent.
+
+     ForwardX11
+             Specifies whether X11 connections will be automatically redirect-
+             ed over the secure channel and DISPLAY set.  The argument must be
+             ``yes'' or ``no''.  The default is ``no''.
+
+             X11 forwarding should be enabled with caution.  Users with the
+             ability to bypass file permissions on the remote host (for the
+             user's X11 authorization database) can access the local X11 dis-
+             play through the forwarded connection.  An attacker may then be
+             able to perform activities such as keystroke monitoring if the
+             ForwardX11Trusted option is also enabled.
+
+     ForwardX11Trusted
+             If this option is set to ``yes'', remote X11 clients will have
+             full access to the original X11 display.
+
+             If this option is set to ``no'', remote X11 clients will be con-
+             sidered untrusted and prevented from stealing or tampering with
+             data belonging to trusted X11 clients.  Furthermore, the xauth(1)
+             token used for the session will be set to expire after 20 min-
+             utes.  Remote clients will be refused access after this time.
+
+             The default is ``no''.
+
+             See the X11 SECURITY extension specification for full details on
+             the restrictions imposed on untrusted clients.
+
+     GatewayPorts
+             Specifies whether remote hosts are allowed to connect to local
+             forwarded ports.  By default, ssh(1) binds local port forwardings
+             to the loopback address.  This prevents other remote hosts from
+             connecting to forwarded ports.  GatewayPorts can be used to spec-
+             ify that ssh should bind local port forwardings to the wildcard
+             address, thus allowing remote hosts to connect to forwarded
+             ports.  The argument must be ``yes'' or ``no''.  The default is
+             ``no''.
+
+     GlobalKnownHostsFile
+             Specifies a file to use for the global host key database instead
+             of /etc/ssh/ssh_known_hosts.
+
+     GSSAPIAuthentication
+             Specifies whether user authentication based on GSSAPI is allowed.
+             The default is ``no''.  Note that this option applies to protocol
+             version 2 only.
+
+     GSSAPIDelegateCredentials
+             Forward (delegate) credentials to the server.  The default is
+             ``no''.  Note that this option applies to protocol version 2 on-
+             ly.
+
+     HashKnownHosts
+             Indicates that ssh(1) should hash host names and addresses when
+             they are added to ~/.ssh/known_hosts.  These hashed names may be
+             used normally by ssh(1) and sshd(8), but they do not reveal iden-
+             tifying information should the file's contents be disclosed.  The
+             default is ``no''.  Note that existing names and addresses in
+             known hosts files will not be converted automatically, but may be
+             manually hashed using ssh-keygen(1).
+
+     HostbasedAuthentication
+             Specifies whether to try rhosts based authentication with public
+             key authentication.  The argument must be ``yes'' or ``no''.  The
+             default is ``no''.  This option applies to protocol version 2 on-
+             ly and is similar to RhostsRSAAuthentication.
+
+     HostKeyAlgorithms
+             Specifies the protocol version 2 host key algorithms that the
+             client wants to use in order of preference.  The default for this
+             option is: ``ssh-rsa,ssh-dss''.
+
+     HostKeyAlias
+             Specifies an alias that should be used instead of the real host
+             name when looking up or saving the host key in the host key
+             database files.  This option is useful for tunneling SSH connec-
+             tions or for multiple servers running on a single host.
+
+     HostName
+             Specifies the real host name to log into.  This can be used to
+             specify nicknames or abbreviations for hosts.  The default is the
+             name given on the command line.  Numeric IP addresses are also
+             permitted (both on the command line and in HostName specifica-
+             tions).
+
+     IdentitiesOnly
+             Specifies that ssh(1) should only use the authentication identity
+             files configured in the ssh_config files, even if ssh-agent(1)
+             offers more identities.  The argument to this keyword must be
+             ``yes'' or ``no''.  This option is intended for situations where
+             ssh-agent offers many different identities.  The default is
+             ``no''.
+
+     IdentityFile
+             Specifies a file from which the user's RSA or DSA authentication
+             identity is read.  The default is ~/.ssh/identity for protocol
+             version 1, and ~/.ssh/id_rsa and ~/.ssh/id_dsa for protocol ver-
+             sion 2.  Additionally, any identities represented by the authen-
+             tication agent will be used for authentication.
+
+             The file name may use the tilde syntax to refer to a user's home
+             directory or one of the following escape characters: `%d' (local
+             user's home directory), `%u' (local user name), `%l' (local host
+             name), `%h' (remote host name) or `%r' (remote user name).
+
+             It is possible to have multiple identity files specified in con-
+             figuration files; all these identities will be tried in sequence.
+
+     KbdInteractiveAuthentication
+             Specifies whether to use keyboard-interactive authentication.
+             The argument to this keyword must be ``yes'' or ``no''.  The de-
+             fault is ``yes''.
+
+     KbdInteractiveDevices
+             Specifies the list of methods to use in keyboard-interactive au-
+             thentication.  Multiple method names must be comma-separated.
+             The default is to use the server specified list.  The methods
+             available vary depending on what the server supports.  For an
+             OpenSSH server, it may be zero or more of: ``bsdauth'', ``pam'',
+             and ``skey''.
+
+     LocalCommand
+             Specifies a command to execute on the local machine after suc-
+             cessfully connecting to the server.  The command string extends
+             to the end of the line, and is executed with the user's shell.
+             The following escape character substitutions will be performed:
+             `%d' (local user's home directory), `%h' (remote host name), `%l'
+             (local host name), `%n' (host name as provided on the command
+             line), `%p' (remote port), `%r' (remote user name) or `%u' (local
+             user name).  This directive is ignored unless PermitLocalCommand
+             has been enabled.
+
+     LocalForward
+             Specifies that a TCP port on the local machine be forwarded over
+             the secure channel to the specified host and port from the remote
+             machine.  The first argument must be [bind_address:]port and the
+             second argument must be host:hostport.  IPv6 addresses can be
+             specified by enclosing addresses in square brackets or by using
+             an alternative syntax: [bind_address/]port and host/hostport.
+             Multiple forwardings may be specified, and additional forwardings
+             can be given on the command line.  Only the superuser can forward
+             privileged ports.  By default, the local port is bound in accor-
+             dance with the GatewayPorts setting.  However, an explicit
+             bind_address may be used to bind the connection to a specific ad-
+             dress.  The bind_address of ``localhost'' indicates that the lis-
+             tening port be bound for local use only, while an empty address
+             or `*' indicates that the port should be available from all in-
+             terfaces.
+
+     LogLevel
+             Gives the verbosity level that is used when logging messages from
+             ssh(1).  The possible values are: QUIET, FATAL, ERROR, INFO, VER-
+             BOSE, DEBUG, DEBUG1, DEBUG2, and DEBUG3.  The default is INFO.
+             DEBUG and DEBUG1 are equivalent.  DEBUG2 and DEBUG3 each specify
+             higher levels of verbose output.
+
+     MACs    Specifies the MAC (message authentication code) algorithms in or-
+             der of preference.  The MAC algorithm is used in protocol version
+             2 for data integrity protection.  Multiple algorithms must be
+             comma-separated.  The default is:
+
+                   hmac-md5,hmac-sha1,umac-64@openssh.com,
+                   hmac-ripemd160,hmac-sha1-96,hmac-md5-96
+
+     NoHostAuthenticationForLocalhost
+             This option can be used if the home directory is shared across
+             machines.  In this case localhost will refer to a different ma-
+             chine on each of the machines and the user will get many warnings
+             about changed host keys.  However, this option disables host au-
+             thentication for localhost.  The argument to this keyword must be
+             ``yes'' or ``no''.  The default is to check the host key for lo-
+             calhost.
+
+     NumberOfPasswordPrompts
+             Specifies the number of password prompts before giving up.  The
+             argument to this keyword must be an integer.  The default is 3.
+
+     PasswordAuthentication
+             Specifies whether to use password authentication.  The argument
+             to this keyword must be ``yes'' or ``no''.  The default is
+             ``yes''.
+
+     PermitLocalCommand
+             Allow local command execution via the LocalCommand option or us-
+             ing the !command escape sequence in ssh(1).  The argument must be
+             ``yes'' or ``no''.  The default is ``no''.
+
+     Port    Specifies the port number to connect on the remote host.  The de-
+             fault is 22.
+
+     PreferredAuthentications
+             Specifies the order in which the client should try protocol 2 au-
+             thentication methods.  This allows a client to prefer one method
+             (e.g. keyboard-interactive) over another method (e.g. password)
+             The default for this option is: ``gssapi-with-mic,hostbased,
+             publickey, keyboard-interactive, password''.
+
+     Protocol
+             Specifies the protocol versions ssh(1) should support in order of
+             preference.  The possible values are `1' and `2'.  Multiple ver-
+             sions must be comma-separated.  The default is ``2,1''.  This
+             means that ssh tries version 2 and falls back to version 1 if
+             version 2 is not available.
+
+     ProxyCommand
+             Specifies the command to use to connect to the server.  The com-
+             mand string extends to the end of the line, and is executed with
+             the user's shell.  In the command string, `%h' will be substitut-
+             ed by the host name to connect and `%p' by the port.  The command
+             can be basically anything, and should read from its standard in-
+             put and write to its standard output.  It should eventually con-
+             nect an sshd(8) server running on some machine, or execute sshd
+             -i somewhere.  Host key management will be done using the Host-
+             Name of the host being connected (defaulting to the name typed by
+             the user).  Setting the command to ``none'' disables this option
+             entirely.  Note that CheckHostIP is not available for connects
+             with a proxy command.
+
+             This directive is useful in conjunction with nc(1) and its proxy
+             support.  For example, the following directive would connect via
+             an HTTP proxy at 192.0.2.0:
+
+                ProxyCommand /usr/bin/nc -X connect -x 192.0.2.0:8080 %h %p
+
+     PubkeyAuthentication
+             Specifies whether to try public key authentication.  The argument
+             to this keyword must be ``yes'' or ``no''.  The default is
+             ``yes''.  This option applies to protocol version 2 only.
+
+     RekeyLimit
+             Specifies the maximum amount of data that may be transmitted be-
+             fore the session key is renegotiated.  The argument is the number
+             of bytes, with an optional suffix of `K', `M', or `G' to indicate
+             Kilobytes, Megabytes, or Gigabytes, respectively.  The default is
+             between `1G' and `4G', depending on the cipher.  This option ap-
+             plies to protocol version 2 only.
+
+     RemoteForward
+             Specifies that a TCP port on the remote machine be forwarded over
+             the secure channel to the specified host and port from the local
+             machine.  The first argument must be [bind_address:]port and the
+             second argument must be host:hostport.  IPv6 addresses can be
+             specified by enclosing addresses in square brackets or by using
+             an alternative syntax: [bind_address/]port and host/hostport.
+             Multiple forwardings may be specified, and additional forwardings
+             can be given on the command line.  Only the superuser can forward
+             privileged ports.
+
+             If the bind_address is not specified, the default is to only bind
+             to loopback addresses.  If the bind_address is `*' or an empty
+             string, then the forwarding is requested to listen on all inter-
+             faces.  Specifying a remote bind_address will only succeed if the
+             server's GatewayPorts option is enabled (see sshd_config(5)).
+
+     RhostsRSAAuthentication
+             Specifies whether to try rhosts based authentication with RSA
+             host authentication.  The argument must be ``yes'' or ``no''.
+             The default is ``no''.  This option applies to protocol version 1
+             only and requires ssh(1) to be setuid root.
+
+     RSAAuthentication
+             Specifies whether to try RSA authentication.  The argument to
+             this keyword must be ``yes'' or ``no''.  RSA authentication will
+             only be attempted if the identity file exists, or an authentica-
+             tion agent is running.  The default is ``yes''.  Note that this
+             option applies to protocol version 1 only.
+
+     SendEnv
+             Specifies what variables from the local environ(7) should be sent
+             to the server.  Note that environment passing is only supported
+             for protocol 2.  The server must also support it, and the server
+             must be configured to accept these environment variables.  Refer
+             to AcceptEnv in sshd_config(5) for how to configure the server.
+             Variables are specified by name, which may contain wildcard char-
+             acters.  Multiple environment variables may be separated by
+             whitespace or spread across multiple SendEnv directives.  The de-
+             fault is not to send any environment variables.
+
+             See PATTERNS for more information on patterns.
+
+     ServerAliveCountMax
+             Sets the number of server alive messages (see below) which may be
+             sent without ssh(1) receiving any messages back from the server.
+             If this threshold is reached while server alive messages are be-
+             ing sent, ssh will disconnect from the server, terminating the
+             session.  It is important to note that the use of server alive
+             messages is very different from TCPKeepAlive (below).  The server
+             alive messages are sent through the encrypted channel and there-
+             fore will not be spoofable.  The TCP keepalive option enabled by
+             TCPKeepAlive is spoofable.  The server alive mechanism is valu-
+             able when the client or server depend on knowing when a connec-
+             tion has become inactive.
+
+             The default value is 3.  If, for example, ServerAliveInterval
+             (see below) is set to 15 and ServerAliveCountMax is left at the
+             default, if the server becomes unresponsive, ssh will disconnect
+             after approximately 45 seconds.  This option applies to protocol
+             version 2 only.
+
+     ServerAliveInterval
+             Sets a timeout interval in seconds after which if no data has
+             been received from the server, ssh(1) will send a message through
+             the encrypted channel to request a response from the server.  The
+             default is 0, indicating that these messages will not be sent to
+             the server.  This option applies to protocol version 2 only.
+
+     SmartcardDevice
+             Specifies which smartcard device to use.  The argument to this
+             keyword is the device ssh(1) should use to communicate with a
+             smartcard used for storing the user's private RSA key.  By de-
+             fault, no device is specified and smartcard support is not acti-
+             vated.
+
+     StrictHostKeyChecking
+             If this flag is set to ``yes'', ssh(1) will never automatically
+             add host keys to the ~/.ssh/known_hosts file, and refuses to con-
+             nect to hosts whose host key has changed.  This provides maximum
+             protection against trojan horse attacks, though it can be annoy-
+             ing when the /etc/ssh/ssh_known_hosts file is poorly maintained
+             or when connections to new hosts are frequently made.  This op-
+             tion forces the user to manually add all new hosts.  If this flag
+             is set to ``no'', ssh will automatically add new host keys to the
+             user known hosts files.  If this flag is set to ``ask'', new host
+             keys will be added to the user known host files only after the
+             user has confirmed that is what they really want to do, and ssh
+             will refuse to connect to hosts whose host key has changed.  The
+             host keys of known hosts will be verified automatically in all
+             cases.  The argument must be ``yes'', ``no'', or ``ask''.  The
+             default is ``ask''.
+
+     TCPKeepAlive
+             Specifies whether the system should send TCP keepalive messages
+             to the other side.  If they are sent, death of the connection or
+             crash of one of the machines will be properly noticed.  However,
+             this means that connections will die if the route is down tem-
+             porarily, and some people find it annoying.
+
+             The default is ``yes'' (to send TCP keepalive messages), and the
+             client will notice if the network goes down or the remote host
+             dies.  This is important in scripts, and many users want it too.
+
+             To disable TCP keepalive messages, the value should be set to
+             ``no''.
+
+     Tunnel  Request tun(4) device forwarding between the client and the serv-
+             er.  The argument must be ``yes'', ``point-to-point'' (layer 3),
+             ``ethernet'' (layer 2), or ``no''.  Specifying ``yes'' requests
+             the default tunnel mode, which is ``point-to-point''.  The de-
+             fault is ``no''.
+
+     TunnelDevice
+             Specifies the tun(4) devices to open on the client (local_tun)
+             and the server (remote_tun).
+
+             The argument must be local_tun[:remote_tun].  The devices may be
+             specified by numerical ID or the keyword ``any'', which uses the
+             next available tunnel device.  If remote_tun is not specified, it
+             defaults to ``any''.  The default is ``any:any''.
+
+     UsePrivilegedPort
+             Specifies whether to use a privileged port for outgoing connec-
+             tions.  The argument must be ``yes'' or ``no''.  The default is
+             ``no''.  If set to ``yes'', ssh(1) must be setuid root.  Note
+             that this option must be set to ``yes'' for
+             RhostsRSAAuthentication with older servers.
+
+     User    Specifies the user to log in as.  This can be useful when a dif-
+             ferent user name is used on different machines.  This saves the
+             trouble of having to remember to give the user name on the com-
+             mand line.
+
+     UserKnownHostsFile
+             Specifies a file to use for the user host key database instead of
+             ~/.ssh/known_hosts.
+
+     VerifyHostKeyDNS
+             Specifies whether to verify the remote key using DNS and SSHFP
+             resource records.  If this option is set to ``yes'', the client
+             will implicitly trust keys that match a secure fingerprint from
+             DNS.  Insecure fingerprints will be handled as if this option was
+             set to ``ask''.  If this option is set to ``ask'', information on
+             fingerprint match will be displayed, but the user will still need
+             to confirm new host keys according to the StrictHostKeyChecking
+             option.  The argument must be ``yes'', ``no'', or ``ask''.  The
+             default is ``no''.  Note that this option applies to protocol
+             version 2 only.
+
+             See also VERIFYING HOST KEYS in ssh(1).
+
+     VisualHostKey
+             If this flag is set to ``yes'', an ASCII art representation of
+             the remote host key fingerprint is printed additionally to the
+             hex fingerprint string.  If this flag is set to ``no'', only the
+             hex fingerprint string will be printed.  The default is ``no''.
+
+     XAuthLocation
+             Specifies the full pathname of the xauth(1) program.  The default
+             is /usr/X11R6/bin/xauth.
+
+PATTERNS
+     A pattern consists of zero or more non-whitespace characters, `*' (a
+     wildcard that matches zero or more characters), or `?' (a wildcard that
+     matches exactly one character).  For example, to specify a set of decla-
+     rations for any host in the ``.co.uk'' set of domains, the following pat-
+     tern could be used:
+
+           Host *.co.uk
+
+     The following pattern would match any host in the 192.168.0.[0-9] network
+     range:
+
+           Host 192.168.0.?
+
+     A pattern-list is a comma-separated list of patterns.  Patterns within
+     pattern-lists may be negated by preceding them with an exclamation mark
+     (`!').  For example, to allow a key to be used from anywhere within an
+     organisation except from the ``dialup'' pool, the following entry (in au-
+     thorized_keys) could be used:
+
+           from="!*.dialup.example.com,*.example.com"
+
+FILES
+     ~/.ssh/config
+             This is the per-user configuration file.  The format of this file
+             is described above.  This file is used by the SSH client.  Be-
+             cause of the potential for abuse, this file must have strict per-
+             missions: read/write for the user, and not accessible by others.
+
+     /etc/ssh/ssh_config
+             Systemwide configuration file.  This file provides defaults for
+             those values that are not specified in the user's configuration
+             file, and for those users who do not have a configuration file.
+             This file must be world-readable.
+
+SEE ALSO
+     ssh(1)
+
+AUTHORS
+     OpenSSH is a derivative of the original and free ssh 1.2.12 release by
+     Tatu Ylonen.  Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo
+     de Raadt and Dug Song removed many bugs, re-added newer features and cre-
+     ated OpenSSH.  Markus Friedl contributed the support for SSH protocol
+     versions 1.5 and 2.0.
+
+OpenBSD 4.4                      June 26, 2008                              11