144 files changed, 10464 insertions, 46759 deletions

diff --git a/.cvsignore b/.cvsignore
index 12de9ef50..98f48ff50 100644
--- a/.cvsignore
+++ b/.cvsignore
@@ -8,8 +8,6 @@ ssh-keysign
 ssh-agent
 sftp-server
 sftp
-configure
-config.h.in
 config.h
 config.status
 config.cache
@@ -18,7 +16,9 @@ stamp-h.in
 Makefile
 ssh_prng_cmds
 *.out
-*.0
 buildit.sh
-autom4te.cache
 ssh-rand-helper
+build-deb
+build-deb-stamp
+build-udeb
+build-udeb-stamp
diff --git a/Makefile.in b/Makefile.in
index a603609ae..ea0f9c3ef 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -292,7 +292,7 @@ install-files: scard-install
         else \
                 echo "$(DESTDIR)$(sysconfdir)/sshd_config already exists, install will not overwrite"; \
         fi
-        @if [ -f ssh_prng_cmds -a ! -z "$(INSTALL_SSH_PRNG_CMDS)" ]; then \
+        @if [ -f ssh_prng_cmds ] && [ ! -z "$(INSTALL_SSH_PRNG_CMDS)" ]; then \
                 if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds ] ; then \
                         $(INSTALL) -m 644 ssh_prng_cmds.out $(DESTDIR)$(sysconfdir)/ssh_prng_cmds; \
                 else \
@@ -406,7 +406,7 @@ tests:	$(TARGETS)
                 $@
 
 regressclean:
-        if [ -f regress/Makefile -a -r regress/Makefile ]; then \
+        if [ -f regress/Makefile ] && [ -r regress/Makefile ]; then \
                 (cd regress && $(MAKE) clean) \
         fi
 
diff --git a/RFC.nroff b/RFC.nroff
deleted file mode 100644
index d6baed652..000000000
--- a/RFC.nroff
+++ /dev/null
@@ -1,1780 +0,0 @@
-.\" -*- nroff -*-
-.\"
-.\" $OpenBSD: RFC.nroff,v 1.2 2000/10/16 09:38:44 djm Exp $
-.\"
-.pl 10.0i
-.po 0
-.ll 7.2i
-.lt 7.2i
-.nr LL 7.2i
-.nr LT 7.2i
-.ds LF Ylonen
-.ds RF FORMFEED[Page %]
-.ds CF
-.ds LH Internet-Draft
-.ds RH 15 November 1995
-.ds CH SSH (Secure Shell) Remote Login Protocol
-.na
-.hy 0
-.in 0
-Network Working Group                                          T. Ylonen
-Internet-Draft                         Helsinki University of Technology
-draft-ylonen-ssh-protocol-00.txt                        15 November 1995
-Expires: 15 May 1996
-
-.in 3
-
-.ce
-The SSH (Secure Shell) Remote Login Protocol
-
-.ti 0
-Status of This Memo
-
-This document is an Internet-Draft.   Internet-Drafts  are  working
-documents of the Internet Engineering Task Force (IETF), its areas,
-and its working groups.  Note that other groups may also distribute
-working documents as Internet-Drafts.
-
-Internet-Drafts are draft documents valid  for  a  maximum  of  six
-months  and  may  be updated, replaced, or obsoleted by other docu-
-ments at any time.  It is inappropriate to use  Internet-Drafts  as
-reference  material  or  to  cite them other than as ``work in pro-
-gress.''
-
-To learn the current status of any Internet-Draft, please check the
-``1id-abstracts.txt'' listing contained in the Internet- Drafts Shadow
-Directories on ftp.is.co.za (Africa), nic.nordu.net (Europe),
-munnari.oz.au (Pacific Rim), ds.internic.net (US East Coast), or
-ftp.isi.edu (US West Coast).
-
-The distribution of  this  memo  is  unlimited.
-
-.ti 0
-Introduction
-
-SSH (Secure Shell) is a program to log into another computer over a
-network, to execute commands in a remote machine, and to move files
-from one machine to another.  It provides strong authentication and
-secure communications over insecure networks.  Its features include
-the following:
-.IP o
-Closes several security holes (e.g., IP, routing, and DNS spoofing).
-New authentication methods: .rhosts together with RSA [RSA] based host
-authentication, and pure RSA authentication.
-.IP o
-All communications are automatically and transparently encrypted.
-Encryption is also used to protect integrity.
-.IP o
-X11 connection forwarding provides secure X11 sessions.
-.IP o
-Arbitrary TCP/IP ports can be redirected over the encrypted channel
-in both directions.
-.IP o
-Client RSA-authenticates the server machine in the beginning of every
-connection to prevent trojan horses (by routing or DNS spoofing) and
-man-in-the-middle attacks, and the server RSA-authenticates the client
-machine before accepting .rhosts or /etc/hosts.equiv authentication
-(to prevent DNS, routing, or IP spoofing).
-.IP o
-An authentication agent, running in the user's local workstation or
-laptop, can be used to hold the user's RSA authentication keys.
-.RT
-
-The goal has been to make the software as easy to use as possible for
-ordinary users.  The protocol has been designed to be as secure as
-possible while making it possible to create implementations that
-are easy to use and install.  The sample implementation has a number
-of convenient features that are not described in this document as they
-are not relevant for the protocol.
-
-
-.ti 0
-Overview of the Protocol
-
-The software consists of a server program running on a server machine,
-and a client program running on a client machine (plus a few auxiliary
-programs).  The machines are connected by an insecure IP [RFC0791]
-network (that can be monitored, tampered with, and spoofed by hostile
-parties).
-
-A connection is always initiated by the client side.  The server
-listens on a specific port waiting for connections.  Many clients may
-connect to the same server machine.
-
-The client and the server are connected via a TCP/IP [RFC0793] socket
-that is used for bidirectional communication.  Other types of
-transport can be used but are currently not defined.
-
-When the client connects the server, the server accepts the connection
-and responds by sending back its version identification string.  The
-client parses the server's identification, and sends its own
-identification.  The purpose of the identification strings is to
-validate that the connection was to the correct port, declare the
-protocol version number used, and to declare the software version used
-on each side (for debugging purposes).  The identification strings are
-human-readable.  If either side fails to understand or support the
-other side's version, it closes the connection.
-
-After the protocol identification phase, both sides switch to a packet
-based binary protocol.  The server starts by sending its host key
-(every host has an RSA key used to authenticate the host), server key
-(an RSA key regenerated every hour), and other information to the
-client.  The client then generates a 256 bit session key, encrypts it
-using both RSA keys (see below for details), and sends the encrypted
-session key and selected cipher type to the server.  Both sides then
-turn on encryption using the selected algorithm and key.  The server
-sends an encrypted confirmation message to the client.
-
-The client then authenticates itself using any of a number of
-authentication methods.  The currently supported authentication
-methods are .rhosts or /etc/hosts.equiv authentication (disabled by
-default), the same with RSA-based host authentication, RSA
-authentication, and password authentication.
-
-After successful authentication, the client makes a number of requests
-to prepare for the session.  Typical requests include allocating a
-pseudo tty, starting X11 [X11] or TCP/IP port forwarding, starting
-authentication agent forwarding, and executing the shell or a command.
-
-When a shell or command is executed, the connection enters interactive
-session mode.  In this mode, data is passed in both directions,
-new forwarded connections may be opened, etc.  The interactive session
-normally terminates when the server sends the exit status of the
-program to the client.
-
-
-The protocol makes several reservations for future extensibility.
-First of all, the initial protocol identification messages include the
-protocol version number.  Second, the first packet by both sides
-includes a protocol flags field, which can be used to agree on
-extensions in a compatible manner.  Third, the authentication and
-session preparation phases work so that the client sends requests to
-the server, and the server responds with success or failure.  If the
-client sends a request that the server does not support, the server
-simply returns failure for it.  This permits compatible addition of
-new authentication methods and preparation operations.  The
-interactive session phase, on the other hand, works asynchronously and
-does not permit the use of any extensions (because there is no easy
-and reliable way to signal rejection to the other side and problems
-would be hard to debug).  Any compatible extensions to this phase must
-be agreed upon during any of the earlier phases.
-
-.ti 0
-The Binary Packet Protocol
-
-After the protocol identification strings, both sides only send
-specially formatted packets.  The packet layout is as follows:
-.IP o
-Packet length: 32 bit unsigned integer, coded as four 8-bit bytes, msb
-first.  Gives the length of the packet, not including the length field
-and padding.  The maximum length of a packet (not including the length
-field and padding) is 262144 bytes.
-.IP o
-Padding: 1-8 bytes of random data (or zeroes if not encrypting).  The
-amount of padding is (8 - (length % 8)) bytes (where % stands for the
-modulo operator).  The rationale for always having some random padding
-at the beginning of each packet is to make known plaintext attacks
-more difficult.
-.IP o
-Packet type: 8-bit unsigned byte.  The value 255 is reserved for
-future extension.
-.IP o
-Data: binary data bytes, depending on the packet type.  The number of
-data bytes is the "length" field minus 5.
-.IP o
-Check bytes: 32-bit crc, four 8-bit bytes, msb first.  The crc is the
-Cyclic Redundancy Check, with the polynomial 0xedb88320, of the
-Padding, Packet type, and Data fields.  The crc is computed before
-any encryption.
-.RT
-
-The packet, except for the length field, may be encrypted using any of
-a number of algorithms.  The length of the encrypted part (Padding +
-Type + Data + Check) is always a multiple of 8 bytes.  Typically the
-cipher is used in a chained mode, with all packets chained together as
-if it was a single data stream (the length field is never included in
-the encryption process).  Details of encryption are described below.
-
-When the session starts, encryption is turned off.  Encryption is
-enabled after the client has sent the session key.  The encryption
-algorithm to use is selected by the client.
-
-
-.ti 0
-Packet Compression
-
-If compression is supported (it is an optional feature, see
-SSH_CMSG_REQUEST_COMPRESSION below), the packet type and data fields
-of the packet are compressed using the gzip deflate algorithm [GZIP].
-If compression is in effect, the packet length field indicates the
-length of the compressed data, plus 4 for the crc.  The amount of
-padding is computed from the compressed data, so that the amount of
-data to be encrypted becomes a multiple of 8 bytes.
-
-When compressing, the packets (type + data portions) in each direction
-are compressed as if they formed a continuous data stream, with only the
-current compression block flushed between packets.  This corresponds
-to the GNU ZLIB library Z_PARTIAL_FLUSH option.  The compression
-dictionary is not flushed between packets.  The two directions are
-compressed independently of each other.
-
-
-.ti 0
-Packet Encryption
-
-The protocol supports several encryption methods.  During session
-initialization, the server sends a bitmask of all encryption methods
-that it supports, and the client selects one of these methods.  The
-client also generates a 256-bit random session key (32 8-bit bytes) and
-sends it to the server.
-
-The encryption methods supported by the current implementation, and
-their codes are:
-.TS
-center;
-l r l.
-SSH_CIPHER_NONE 0          No encryption
-SSH_CIPHER_IDEA 1          IDEA in CFB mode
-SSH_CIPHER_DES  2          DES in CBC mode
-SSH_CIPHER_3DES 3          Triple-DES in CBC mode
-SSH_CIPHER_TSS  4          An experimental stream cipher
-SSH_CIPHER_RC4  5          RC4
-.TE
-
-All implementations are required to support SSH_CIPHER_DES and
-SSH_CIPHER_3DES.  Supporting SSH_CIPHER_IDEA, SSH_CIPHER_RC4, and
-SSH_CIPHER_NONE is recommended.  Support for SSH_CIPHER_TSS is
-optional (and it is not described in this document).  Other ciphers
-may be added at a later time; support for them is optional.
-
-For encryption, the encrypted portion of the packet is considered a
-linear byte stream.  The length of the stream is always a multiple of
-8.  The encrypted portions of consecutive packets (in the same
-direction) are encrypted as if they were a continuous buffer (that is,
-any initialization vectors are passed from the previous packet to the
-next packet).  Data in each direction is encrypted independently.
-.IP SSH_CIPHER_DES
-The key is taken from the first 8 bytes of the session key.  The least
-significant bit of each byte is ignored.  This results in 56 bits of
-key data.  DES [DES] is used in CBC mode.  The iv (initialization vector) is
-initialized to all zeroes.
-.IP SSH_CIPHER_3DES
-The variant of triple-DES used here works as follows: there are three
-independent DES-CBC ciphers, with independent initialization vectors.
-The data (the whole encrypted data stream) is first encrypted with the
-first cipher, then decrypted with the second cipher, and finally
-encrypted with the third cipher.  All these operations are performed
-in CBC mode.
-
-The key for the first cipher is taken from the first 8 bytes of the
-session key; the key for the next cipher from the next 8 bytes, and
-the key for the third cipher from the following 8 bytes.  All three
-initialization vectors are initialized to zero.
-
-(Note: the variant of 3DES used here differs from some other
-descriptions.)
-.IP SSH_CIPHER_IDEA
-The key is taken from the first 16 bytes of the session key.  IDEA
-[IDEA] is used in CFB mode.  The initialization vector is initialized
-to all zeroes.
-.IP SSH_CIPHER_TSS
-All 32 bytes of the session key are used as the key.
-
-There is no reference available for the TSS algorithm; it is currently
-only documented in the sample implementation source code.  The
-security of this cipher is unknown (but it is quite fast).  The cipher
-is basically a stream cipher that uses MD5 as a random number
-generator and takes feedback from the data.
-.IP SSH_CIPHER_RC4
-The first 16 bytes of the session key are used as the key for the
-server to client direction.  The remaining 16 bytes are used as the
-key for the client to server direction.  This gives independent
-128-bit keys for each direction.
-
-This algorithm is the alleged RC4 cipher posted to the Usenet in 1995.
-It is widely believed to be equivalent with the original RSADSI RC4
-cipher.  This is a very fast algorithm.
-.RT
-
-
-.ti 0
-Data Type Encodings
-
-The Data field of each packet contains data encoded as described in
-this section.  There may be several data items; each item is coded as
-described here, and their representations are concatenated together
-(without any alignment or padding).
-
-Each data type is stored as follows:
-.IP "8-bit byte"
-The byte is stored directly as a single byte.
-.IP "32-bit unsigned integer"
-Stored in 4 bytes, msb first.
-.IP "Arbitrary length binary string"
-First 4 bytes are the length of the string, msb first (not including
-the length itself).  The following "length" bytes are the string
-value.  There are no terminating null characters.
-.IP "Multiple-precision integer"
-First 2 bytes are the number of bits in the integer, msb first (for
-example, the value 0x00012345 would have 17 bits).  The value zero has
-zero bits.  It is permissible that the number of bits be larger than the
-real number of bits.
-
-The number of bits is followed by (bits + 7) / 8 bytes of binary data,
-msb first, giving the value of the integer.
-.RT
-
-
-.ti 0
-TCP/IP Port Number and Other Options
-
-The server listens for connections on TCP/IP port 22.
-
-The client may connect the server from any port.  However, if the
-client wishes to use any form of .rhosts or /etc/hosts.equiv
-authentication, it must connect from a privileged port (less than
-1024).
-
-For the IP Type of Service field [RFC0791], it is recommended that
-interactive sessions (those having a user terminal or forwarding X11
-connections) use the IPTOS_LOWDELAY, and non-interactive connections
-use IPTOS_THROUGHPUT.
-
-It is recommended that keepalives are used, because otherwise programs
-on the server may never notice if the other end of the connection is
-rebooted.
-
-
-.ti 0
-Protocol Version Identification
-
-After the socket is opened, the server sends an identification string,
-which is of the form
-"SSH-<protocolmajor>.<protocolminor>-<version>\\n", where
-<protocolmajor> and <protocolminor> are integers and specify the
-protocol version number (not software distribution version).
-<version> is server side software version string (max 40 characters);
-it is not interpreted by the remote side but may be useful for
-debugging.
-
-The client parses the server's string, and sends a corresponding
-string with its own information in response.  If the server has lower
-version number, and the client contains special code to emulate it,
-the client responds with the lower number; otherwise it responds with
-its own number.  The server then compares the version number the
-client sent with its own, and determines whether they can work
-together.  The server either disconnects, or sends the first packet
-using the binary packet protocol and both sides start working
-according to the lower of the protocol versions.
-
-By convention, changes which keep the protocol compatible with
-previous versions keep the same major protocol version; changes that
-are not compatible increment the major version (which will hopefully
-never happen).  The version described in this document is 1.3.
-
-The client will
-
-.ti 0
-Key Exchange and Server Host Authentication
-
-The first message sent by the server using the packet protocol is
-SSH_SMSG_PUBLIC_KEY.  It declares the server's host key, server public
-key, supported ciphers, supported authentication methods, and flags
-for protocol extensions.  It also contains a 64-bit random number
-(cookie) that must be returned in the client's reply (to make IP
-spoofing more difficult).  No encryption is used for this message.
-
-Both sides compute a session id as follows.  The modulus of the server
-key is interpreted as a byte string (without explicit length field,
-with minimum length able to hold the whole value), most significant
-byte first.  This string is concatenated with the server host key
-interpreted the same way.  Additionally, the cookie is concatenated
-with this.  Both sides compute MD5 of the resulting string.  The
-resulting 16 bytes (128 bits) are stored by both parties and are
-called the session id.
-
-The client responds with a SSH_CMSG_SESSION_KEY message, which
-contains the selected cipher type, a copy of the 64-bit cookie sent by
-the server, client's protocol flags, and a session key encrypted
-with both the server's host key and server key.  No encryption is used
-for this message.
-
-The session key is 32 8-bit bytes (a total of 256 random bits
-generated by the client).  The client first xors the 16 bytes of the
-session id with the first 16 bytes of the session key.  The resulting
-string is then encrypted using the smaller key (one with smaller
-modulus), and the result is then encrypted using the other key.  The
-number of bits in the public modulus of the two keys must differ by at
-least 128 bits.
-
-At each encryption step, a multiple-precision integer is constructed
-from the data to be encrypted as follows (the integer is here
-interpreted as a sequence of bytes, msb first; the number of bytes is
-the number of bytes needed to represent the modulus).
-
-The most significant byte (which is only partial as the value must be
-less than the public modulus, which is never a power of two) is zero.
-
-The next byte contains the value 2 (which stands for public-key
-encrypted data in the PKCS standard [PKCS#1]).  Then, there are
-non-zero random bytes to fill any unused space, a zero byte, and the
-data to be encrypted in the least significant bytes, the last byte of
-the data in the least significant byte.
-
-This algorithm is used twice.  First, it is used to encrypt the 32
-random bytes generated by the client to be used as the session key
-(xored by the session id).  This value is converted to an integer as
-described above, and encrypted with RSA using the key with the smaller
-modulus.  The resulting integer is converted to a byte stream, msb
-first.  This byte stream is padded and encrypted identically using the
-key with the larger modulus.
-
-After the client has sent the session key, it starts to use the
-selected algorithm and key for decrypting any received packets, and
-for encrypting any sent packets.  Separate ciphers are used for
-different directions (that is, both directions have separate
-initialization vectors or other state for the ciphers).
-
-When the server has received the session key message, and has turned
-on encryption, it sends a SSH_SMSG_SUCCESS message to the client.
-
-The recommended size of the host key is 1024 bits, and 768 bits for
-the server key.  The minimum size is 512 bits for the smaller key.
-
-
-.ti 0
-Declaring the User Name
-
-The client then sends a SSH_CMSG_USER message to the server.  This
-message specifies the user name to log in as.
-
-The server validates that such a user exists, checks whether
-authentication is needed, and responds with either SSH_SMSG_SUCCESS or
-SSH_SMSG_FAILURE.  SSH_SMSG_SUCCESS indicates that no authentication
-is needed for this user (no password), and authentication phase has
-now been completed.  SSH_SMSG_FAILURE indicates that authentication is
-needed (or the user does not exist).
-
-If the user does not exist, it is recommended that this returns
-failure, but the server keeps reading messages from the client, and
-responds to any messages (except SSH_MSG_DISCONNECT, SSH_MSG_IGNORE,
-and SSH_MSG_DEBUG) with SSH_SMSG_FAILURE.  This way the client cannot
-be certain whether the user exists.
-
-
-.ti 0
-Authentication Phase
-
-Provided the server didn't immediately accept the login, an
-authentication exchange begins.  The client sends messages to the
-server requesting different types of authentication in arbitrary order as
-many times as desired (however, the server may close the connection
-after a timeout).  The server always responds with SSH_SMSG_SUCCESS if
-it has accepted the authentication, and with SSH_SMSG_FAILURE if it has
-denied authentication with the requested method or it does not
-recognize the message.  Some authentication methods cause an exchange
-of further messages before the final result is sent.  The
-authentication phase ends when the server responds with success.
-
-The recommended value for the authentication timeout (timeout before
-disconnecting if no successful authentication has been made) is 5
-minutes.
-
-The following authentication methods are currently supported:
-.TS
-center;
-l r l.
-SSH_AUTH_RHOSTS 1       .rhosts or /etc/hosts.equiv
-SSH_AUTH_RSA    2       pure RSA authentication
-SSH_AUTH_PASSWORD       3       password authentication
-SSH_AUTH_RHOSTS_RSA     4       .rhosts with RSA host authentication
-.TE
-.IP SSH_AUTH_RHOSTS
-
-This is the authentication method used by rlogin and rsh [RFC1282].
-
-The client sends SSH_CMSG_AUTH_RHOSTS with the client-side user name
-as an argument.
-
-The server checks whether to permit authentication.  On UNIX systems,
-this is usually done by checking /etc/hosts.equiv, and .rhosts in the
-user's home directory.  The connection must come from a privileged
-port.
-
-It is recommended that the server checks that there are no IP options
-(such as source routing) specified for the socket before accepting
-this type of authentication.  The client host name should be
-reverse-mapped and then forward mapped to ensure that it has the
-proper IP-address.
-
-This authentication method trusts the remote host (root on the remote
-host can pretend to be any other user on that host), the name
-services, and partially the network: anyone who can see packets coming
-out from the server machine can do IP-spoofing and pretend to be any
-machine; however, the protocol prevents blind IP-spoofing (which used
-to be possible with rlogin).
-
-Many sites probably want to disable this authentication method because
-of the fundamental insecurity of conventional .rhosts or
-/etc/hosts.equiv authentication when faced with spoofing.  It is
-recommended that this method not be supported by the server by
-default.
-.IP SSH_AUTH_RHOSTS_RSA
-
-In addition to conventional .rhosts and hosts.equiv authentication,
-this method additionally requires that the client host be
-authenticated using RSA.
-
-The client sends SSH_CMSG_AUTH_RHOSTS_RSA specifying the client-side
-user name, and the public host key of the client host.
-
-The server first checks if normal .rhosts or /etc/hosts.equiv
-authentication would be accepted, and if not, responds with
-SSH_SMSG_FAILURE.  Otherwise, it checks whether it knows the host key
-for the client machine (using the same name for the host that was used
-for checking the .rhosts and /etc/hosts.equiv files).  If it does not
-know the RSA key for the client, access is denied and SSH_SMSG_FAILURE
-is sent.
-
-If the server knows the host key of the client machine, it verifies
-that the given host key matches that known for the client.  If not,
-access is denied and SSH_SMSG_FAILURE is sent.
-
-The server then sends a SSH_SMSG_AUTH_RSA_CHALLENGE message containing
-an encrypted challenge for the client.  The challenge is 32 8-bit
-random bytes (256 bits).  When encrypted, the highest (partial) byte
-is left as zero, the next byte contains the value 2, the following are
-non-zero random bytes, followed by a zero byte, and the challenge put
-in the remaining bytes.  This is then encrypted using RSA with the
-client host's public key.  (The padding and encryption algorithm is
-the same as that used for the session key.)
-
-The client decrypts the challenge using its private host key,
-concatenates this with the session id, and computes an MD5 checksum
-of the resulting 48 bytes.  The MD5 output is returned as 16 bytes in
-a SSH_CMSG_AUTH_RSA_RESPONSE message.  (MD5 is used to deter chosen
-plaintext attacks against RSA; the session id binds it to a specific
-session).
-
-The server verifies that the MD5 of the decrypted challenge returned by
-the client matches that of the original value, and sends SSH_SMSG_SUCCESS if
-so.  Otherwise it sends SSH_SMSG_FAILURE and refuses the
-authentication attempt.
-
-This authentication method trusts the client side machine in that root
-on that machine can pretend to be any user on that machine.
-Additionally, it trusts the client host key.  The name and/or IP
-address of the client host is only used to select the public host key.
-The same host name is used when scanning .rhosts or /etc/hosts.equiv
-and when selecting the host key.  It would in principle be possible to
-eliminate the host name entirely and substitute it directly by the
-host key.  IP and/or DNS [RFC1034] spoofing can only be used
-to pretend to be a host for which the attacker has the private host
-key.
-.IP SSH_AUTH_RSA
-
-The idea behind RSA authentication is that the server recognizes the
-public key offered by the client, generates a random challenge, and
-encrypts the challenge with the public key.  The client must then
-prove that it has the corresponding private key by decrypting the
-challenge.
-
-The client sends SSH_CMSG_AUTH_RSA with public key modulus (n) as an
-argument.
-
-The server may respond immediately with SSH_SMSG_FAILURE if it does
-not permit authentication with this key.  Otherwise it generates a
-challenge, encrypts it using the user's public key (stored on the
-server and identified using the modulus), and sends
-SSH_SMSG_AUTH_RSA_CHALLENGE with the challenge (mp-int) as an
-argument.
-
-The challenge is 32 8-bit random bytes (256 bits).  When encrypted,
-the highest (partial) byte is left as zero, the next byte contains the
-value 2, the following are non-zero random bytes, followed by a zero
-byte, and the challenge put in the remaining bytes.  This is then
-encrypted with the public key.  (The padding and encryption algorithm
-is the same as that used for the session key.)
-
-The client decrypts the challenge using its private key, concatenates
-it with the session id, and computes an MD5 checksum of the resulting
-48 bytes.  The MD5 output is returned as 16 bytes in a
-SSH_CMSG_AUTH_RSA_RESPONSE message.  (Note that the MD5 is necessary
-to avoid chosen plaintext attacks against RSA; the session id binds it
-to a specific session.)
-
-The server verifies that the MD5 of the decrypted challenge returned
-by the client matches that of the original value, and sends
-SSH_SMSG_SUCCESS if so.  Otherwise it sends SSH_SMSG_FAILURE and
-refuses the authentication attempt.
-
-This authentication method does not trust the remote host, the
-network, name services, or anything else.  Authentication is based
-solely on the possession of the private identification keys.  Anyone
-in possession of the private keys can log in, but nobody else.
-
-The server may have additional requirements for a successful
-authentiation.  For example, to limit damage due to a compromised RSA
-key, a server might restrict access to a limited set of hosts.
-.IP SSH_AUTH_PASSWORD
-
-The client sends a SSH_CMSG_AUTH_PASSWORD message with the plain text
-password.  (Note that even though the password is plain text inside
-the message, it is normally encrypted by the packet mechanism.)
-
-The server verifies the password, and sends SSH_SMSG_SUCCESS if
-authentication was accepted and SSH_SMSG_FAILURE otherwise.
-
-Note that the password is read from the user by the client; the user
-never interacts with a login program.
-
-This authentication method does not trust the remote host, the
-network, name services or anything else.  Authentication is based
-solely on the possession of the password.  Anyone in possession of the
-password can log in, but nobody else.
-.RT
-
-.ti 0
-Preparatory Operations
-
-After successful authentication, the server waits for a request from
-the client, processes the request, and responds with SSH_SMSG_SUCCESS
-whenever a request has been successfully processed.  If it receives a
-message that it does not recognize or it fails to honor a request, it
-returns SSH_SMSG_FAILURE.  It is expected that new message types might
-be added to this phase in future.
-
-The following messages are currently defined for this phase.
-.IP SSH_CMSG_REQUEST_COMPRESSION
-Requests that compression be enabled for this session.  A
-gzip-compatible compression level (1-9) is passed as an argument.
-.IP SSH_CMSG_REQUEST_PTY
-Requests that a pseudo terminal device be allocated for this session.
-The user terminal type and terminal modes are supplied as arguments.
-.IP SSH_CMSG_X11_REQUEST_FORWARDING
-Requests forwarding of X11 connections from the remote machine to the
-local machine over the secure channel.  Causes an internet-domain
-socket to be allocated and the DISPLAY variable to be set on the server.
-X11 authentication data is automatically passed to the server, and the
-client may implement spoofing of authentication data for added
-security.  The authentication data is passed as arguments.
-.IP SSH_CMSG_PORT_FORWARD_REQUEST
-Requests forwarding of a TCP/IP port on the server host over the
-secure channel.  What happens is that whenever a connection is made to
-the port on the server, a connection will be made from the client end
-to the specified host/port.  Any user can forward unprivileged ports;
-only the root can forward privileged ports (as determined by
-authentication done earlier).
-.IP SSH_CMSG_AGENT_REQUEST_FORWARDING
-Requests forwarding of the connection to the authentication agent.
-.IP SSH_CMSG_EXEC_SHELL
-Starts a shell (command interpreter) for the user, and moves into
-interactive session mode.
-.IP SSH_CMSG_EXEC_CMD
-Executes the given command (actually "<shell> -c <command>" or
-equivalent) for the user, and moves into interactive session mode.
-.RT
-
-
-.ti 0
-Interactive Session and Exchange of Data
-
-During the interactive session, any data written by the shell or
-command running on the server machine is forwarded to stdin or
-stderr on the client machine, and any input available from stdin on
-the client machine is forwarded to the program on the server machine.
-
-All exchange is asynchronous; either side can send at any time, and
-there are no acknowledgements (TCP/IP already provides reliable
-transport, and the packet protocol protects against tampering or IP
-spoofing).
-
-When the client receives EOF from its standard input, it will send
-SSH_CMSG_EOF; however, this in no way terminates the exchange.  The
-exchange terminates and interactive mode is left when the server sends
-SSH_SMSG_EXITSTATUS to indicate that the client program has
-terminated.  Alternatively, either side may disconnect at any time by
-sending SSH_MSG_DISCONNECT or closing the connection.
-
-The server may send any of the following messages:
-.IP SSH_SMSG_STDOUT_DATA
-Data written to stdout by the program running on the server.  The data
-is passed as a string argument.  The client writes this data to
-stdout.
-.IP SSH_SMSG_STDERR_DATA
-Data written to stderr by the program running on the server.  The data
-is passed as a string argument.  The client writes this data to
-stderr.  (Note that if the program is running on a tty, it is not
-possible to separate stdout and stderr data, and all data will be sent
-as stdout data.)
-.IP SSH_SMSG_EXITSTATUS
-Indicates that the shell or command has exited.  Exit status is passed
-as an integer argument.  This message causes termination of the
-interactive session.
-.IP SSH_SMSG_AGENT_OPEN
-Indicates that someone on the server side is requesting a connection
-to the authentication agent.  The server-side channel number is passed
-as an argument.  The client must respond with either
-SSH_CHANNEL_OPEN_CONFIRMATION or SSH_CHANNEL_OPEN_FAILURE.
-.IP SSH_SMSG_X11_OPEN
-Indicates that a connection has been made to the X11 socket on the
-server side and should be forwarded to the real X server.  An integer
-argument indicates the channel number allocated for this connection on
-the server side.  The client should send back either
-SSH_MSG_CHANNEL_OPEN_CONFIRMATION or SSH_MSG_CHANNEL_OPEN_FAILURE with
-the same server side channel number.
-.IP SSH_MSG_PORT_OPEN
-Indicates that a connection has been made to a port on the server side
-for which forwarding has been requested.  Arguments are server side
-channel number, host name to connect to, and port to connect to.  The
-client should send back either
-SSH_MSG_CHANNEL_OPEN_CONFIRMATION or SSH_MSG_CHANNEL_OPEN_FAILURE with
-the same server side channel number.
-.IP SSH_MSG_CHANNEL_OPEN_CONFIRMATION
-This is sent by the server to indicate that it has opened a connection
-as requested in a previous message.  The first argument indicates the
-client side channel number, and the second argument is the channel number
-that the server has allocated for this connection.
-.IP SSH_MSG_CHANNEL_OPEN_FAILURE
-This is sent by the server to indicate that it failed to open a
-connection as requested in a previous message.  The client-side
-channel number is passed as an argument.  The client will close the
-descriptor associated with the channel and free the channel.
-.IP SSH_MSG_CHANNEL_DATA
-This packet contains data for a channel from the server.  The first
-argument is the client-side channel number, and the second argument (a
-string) is the data.
-.IP SSH_MSG_CHANNEL_CLOSE
-This is sent by the server to indicate that whoever was in the other
-end of the channel has closed it.  The argument is the client side channel
-number.  The client will let all buffered data in the channel to
-drain, and when ready, will close the socket, free the channel, and
-send the server a SSH_MSG_CHANNEL_CLOSE_CONFIRMATION message for the
-channel.
-.IP SSH_MSG_CHANNEL_CLOSE_CONFIRMATION
-This is send by the server to indicate that a channel previously
-closed by the client has now been closed on the server side as well.
-The argument indicates the client channel number.  The client frees
-the channel.
-.RT
-
-The client may send any of the following messages:
-.IP SSH_CMSG_STDIN_DATA
-This is data to be sent as input to the program running on the server.
-The data is passed as a string.
-.IP SSH_CMSG_EOF
-Indicates that the client has encountered EOF while reading standard
-input.  The server will allow any buffered input data to drain, and
-will then close the input to the program.
-.IP SSH_CMSG_WINDOW_SIZE
-Indicates that window size on the client has been changed.  The server
-updates the window size of the tty and causes SIGWINCH to be sent to
-the program.  The new window size is passed as four integer arguments:
-row, col, xpixel, ypixel.
-.IP SSH_MSG_PORT_OPEN
-Indicates that a connection has been made to a port on the client side
-for which forwarding has been requested.  Arguments are client side
-channel number, host name to connect to, and port to connect to.  The
-server should send back either SSH_MSG_CHANNEL_OPEN_CONFIRMATION or
-SSH_MSG_CHANNEL_OPEN_FAILURE with the same client side channel number.
-.IP SSH_MSG_CHANNEL_OPEN_CONFIRMATION
-This is sent by the client to indicate that it has opened a connection
-as requested in a previous message.  The first argument indicates the
-server side channel number, and the second argument is the channel
-number that the client has allocated for this connection.
-.IP SSH_MSG_CHANNEL_OPEN_FAILURE
-This is sent by the client to indicate that it failed to open a
-connection as requested in a previous message.  The server side
-channel number is passed as an argument.  The server will close the
-descriptor associated with the channel and free the channel.
-.IP SSH_MSG_CHANNEL_DATA
-This packet contains data for a channel from the client.  The first
-argument is the server side channel number, and the second argument (a
-string) is the data.
-.IP SSH_MSG_CHANNEL_CLOSE
-This is sent by the client to indicate that whoever was in the other
-end of the channel has closed it.  The argument is the server channel
-number.  The server will allow buffered data to drain, and when ready,
-will close the socket, free the channel, and send the client a
-SSH_MSG_CHANNEL_CLOSE_CONFIRMATION message for the channel.
-.IP SSH_MSG_CHANNEL_CLOSE_CONFIRMATION
-This is send by the client to indicate that a channel previously
-closed by the server has now been closed on the client side as well.
-The argument indicates the server channel number.  The server frees
-the channel.
-.RT
-
-Any unsupported messages during interactive mode cause the connection
-to be terminated with SSH_MSG_DISCONNECT and an error message.
-Compatible protocol upgrades should agree about any extensions during
-the preparation phase or earlier.
-
-
-.ti 0
-Termination of the Connection
-
-Normal termination of the connection is always initiated by the server
-by sending SSH_SMSG_EXITSTATUS after the program has exited.  The
-client responds to this message by sending SSH_CMSG_EXIT_CONFIRMATION
-and closes the socket; the server then closes the socket.  There are
-two purposes for the confirmation: some systems may lose previously
-sent data when the socket is closed, and closing the client side first
-causes any TCP/IP TIME_WAIT [RFC0793] waits to occur on the client side, not
-consuming server resources.
-
-If the program terminates due to a signal, the server will send
-SSH_MSG_DISCONNECT with an appropriate message.  If the connection is
-closed, all file descriptors to the program will be closed and the
-server will exit.  If the program runs on a tty, the kernel sends it
-the SIGHUP signal when the pty master side is closed.
-
-.ti 0
-Protocol Flags
-
-Both the server and the client pass 32 bits of protocol flags to the
-other side.  The flags are intended for compatible protocol extension;
-the server first announces which added capabilities it supports, and
-the client then sends the capabilities that it supports.
-
-The following flags are currently defined (the values are bit masks):
-.IP "1 SSH_PROTOFLAG_SCREEN_NUMBER"
-This flag can only be sent by the client.  It indicates that the X11
-forwarding requests it sends will include the screen number.
-.IP "2 SSH_PROTOFLAG_HOST_IN_FWD_OPEN"
-If both sides specify this flag, SSH_SMSG_X11_OPEN and
-SSH_MSG_PORT_OPEN messages will contain an additional field containing
-a description of the host at the other end of the connection.
-.RT
-
-.ti 0
-Detailed Description of Packet Types and Formats
-
-The supported packet types and the corresponding message numbers are
-given in the following table.  Messages with _MSG_ in their name may
-be sent by either side.  Messages with _CMSG_ are only sent by the
-client, and messages with _SMSG_ only by the server.
-
-A packet may contain additional data after the arguments specified
-below.  Any such data should be ignored by the receiver.  However, it
-is recommended that no such data be stored without good reason.  (This
-helps build compatible extensions.)
-.IP "0 SSH_MSG_NONE"
-This code is reserved.  This message type is never sent.
-.IP "1 SSH_MSG_DISCONNECT"
-.TS
-;
-l l.
-string  Cause of disconnection
-.TE
-This message may be sent by either party at any time.  It causes the
-immediate disconnection of the connection.  The message is intended to
-be displayed to a human, and describes the reason for disconnection.
-.IP "2 SSH_SMSG_PUBLIC_KEY"
-.TS
-;
-l l.
-8 bytes anti_spoofing_cookie
-32-bit int      server_key_bits
-mp-int  server_key_public_exponent
-mp-int  server_key_public_modulus
-32-bit int      host_key_bits
-mp-int  host_key_public_exponent
-mp-int  host_key_public_modulus
-32-bit int      protocol_flags
-32-bit int      supported_ciphers_mask
-32-bit int      supported_authentications_mask
-.TE
-Sent as the first message by the server.  This message gives the
-server's host key, server key, protocol flags (intended for compatible
-protocol extension), supported_ciphers_mask (which is the
-bitwise or of (1 << cipher_number), where << is the left shift
-operator, for all supported ciphers), and
-supported_authentications_mask (which is the bitwise or of (1 <<
-authentication_type) for all supported authentication types).  The
-anti_spoofing_cookie is 64 random bytes, and must be sent back
-verbatim by the client in its reply.  It is used to make IP-spoofing
-more difficult (encryption and host keys are the real defense against
-spoofing).
-.IP "3 SSH_CMSG_SESSION_KEY"
-.TS
-;
-l l.
-1 byte  cipher_type (must be one of the supported values)
-8 bytes anti_spoofing_cookie (must match data sent by the server)
-mp-int  double-encrypted session key
-32-bit int      protocol_flags
-.TE
-Sent by the client as the first message in the session.  Selects the
-cipher to use, and sends the encrypted session key to the server.  The
-anti_spoofing_cookie must be the same bytes that were sent by the
-server.  Protocol_flags is intended for negotiating compatible
-protocol extensions.
-.IP "4 SSH_CMSG_USER"
-.TS
-;
-l l.
-string  user login name on server
-.TE
-Sent by the client to begin authentication.  Specifies the user name
-on the server to log in as.  The server responds with SSH_SMSG_SUCCESS
-if no authentication is needed for this user, or SSH_SMSG_FAILURE if
-authentication is needed (or the user does not exist).  [Note to the
-implementator: the user name is of arbitrary size.  The implementation
-must be careful not to overflow internal buffers.]
-.IP "5 SSH_CMSG_AUTH_RHOSTS"
-.TS
-;
-l l.
-string  client-side user name
-.TE
-Requests authentication using /etc/hosts.equiv and .rhosts (or
-equivalent mechanisms).  This authentication method is normally
-disabled in the server because it is not secure (but this is the
-method used by rsh and rlogin).  The server responds with
-SSH_SMSG_SUCCESS if authentication was successful, and
-SSH_SMSG_FAILURE if access was not granted.  The server should check
-that the client side port number is less than 1024 (a privileged
-port), and immediately reject authentication if it is not.  Supporting
-this authentication method is optional.  This method should normally
-not be enabled in the server because it is not safe.  (However, not
-enabling this only helps if rlogind and rshd are disabled.)
-.IP "6 SSH_CMSG_AUTH_RSA"
-.TS
-;
-l l.
-mp-int  identity_public_modulus
-.TE
-Requests authentication using pure RSA authentication.  The server
-checks if the given key is permitted to log in, and if so, responds
-with SSH_SMSG_AUTH_RSA_CHALLENGE.  Otherwise, it responds with
-SSH_SMSG_FAILURE.  The client often tries several different keys in
-sequence until one supported by the server is found.  Authentication
-is accepted if the client gives the correct response to the challenge.
-The server is free to add other criteria for authentication, such as a
-requirement that the connection must come from a certain host.  Such
-additions are not visible at the protocol level.  Supporting this
-authentication method is optional but recommended.
-.IP "7 SSH_SMSG_AUTH_RSA_CHALLENGE"
-.TS
-;
-l l.
-mp-int  encrypted challenge
-.TE
-Presents an RSA authentication challenge to the client.  The challenge
-is a 256-bit random value encrypted as described elsewhere in this
-document.  The client must decrypt the challenge using the RSA private
-key, compute MD5 of the challenge plus session id, and send back the
-resulting 16 bytes using SSH_CMSG_AUTH_RSA_RESPONSE.
-.IP "8 SSH_CMSG_AUTH_RSA_RESPONSE"
-.TS
-;
-l l.
-16 bytes        MD5 of decrypted challenge
-.TE
-This message is sent by the client in response to an RSA challenge.
-The MD5 checksum is returned instead of the decrypted challenge to
-deter known-plaintext attacks against the RSA key.  The server
-responds to this message with either SSH_SMSG_SUCCESS or
-SSH_SMSG_FAILURE.
-.IP "9 SSH_CMSG_AUTH_PASSWORD"
-.TS
-;
-l l.
-string  plain text password
-.TE
-Requests password authentication using the given password.  Note that
-even though the password is plain text inside the packet, the whole
-packet is normally encrypted by the packet layer.  It would not be
-possible for the client to perform password encryption/hashing,
-because it cannot know which kind of encryption/hashing, if any, the
-server uses.  The server responds to this message with
-SSH_SMSG_SUCCESS or SSH_SMSG_FAILURE.
-.IP "10 SSH_CMSG_REQUEST_PTY"
-.TS
-;
-l l.
-string  TERM environment variable value (e.g. vt100)
-32-bit int      terminal height, rows (e.g., 24)
-32-bit int      terminal width, columns (e.g., 80)
-32-bit int      terminal width, pixels (0 if no graphics) (e.g., 480)
-32-bit int      terminal height, pixels (0 if no graphics) (e.g., 640)
-n bytes tty modes encoded in binary
-.TE
-Requests a pseudo-terminal to be allocated for this command.  This
-message can be used regardless of whether the session will later
-execute the shell or a command.  If a pty has been requested with this
-message, the shell or command will run on a pty.  Otherwise it will
-communicate with the server using pipes, sockets or some other similar
-mechanism.
-
-The terminal type gives the type of the user's terminal.  In the UNIX
-environment it is passed to the shell or command in the TERM
-environment variable.
-
-The width and height values give the initial size of the user's
-terminal or window.  All values can be zero if not supported by the
-operating system.  The server will pass these values to the kernel if
-supported.
-
-Terminal modes are encoded into a byte stream in a portable format.
-The exact format is described later in this document.
-
-The server responds to the request with either SSH_SMSG_SUCCESS or
-SSH_SMSG_FAILURE.  If the server does not have the concept of pseudo
-terminals, it should return success if it is possible to execute a
-shell or a command so that it looks to the client as if it was running
-on a pseudo terminal.
-.IP "11 SSH_CMSG_WINDOW_SIZE"
-.TS
-;
-l l.
-32-bit int      terminal height, rows
-32-bit int      terminal width, columns
-32-bit int      terminal width, pixels
-32-bit int      terminal height, pixels
-.TE
-This message can only be sent by the client during the interactive
-session.  This indicates that the size of the user's window has
-changed, and provides the new size.  The server will update the
-kernel's notion of the window size, and a SIGWINCH signal or
-equivalent will be sent to the shell or command (if supported by the
-operating system).
-.IP "12 SSH_CMSG_EXEC_SHELL"
-
-(no arguments)
-
-Starts a shell (command interpreter), and enters interactive session
-mode.
-.IP "13 SSH_CMSG_EXEC_CMD"
-.TS
-;
-l l.
-string  command to execute
-.TE
-Starts executing the given command, and enters interactive session
-mode.  On UNIX, the command is run as "<shell> -c <command>", where
-<shell> is the user's login shell.
-.IP "14 SSH_SMSG_SUCCESS"
-
-(no arguments)
-
-This message is sent by the server in response to the session key, a
-successful authentication request, and a successfully completed
-preparatory operation.
-.IP "15 SSH_SMSG_FAILURE"
-
-(no arguments)
-
-This message is sent by the server in response to a failed
-authentication operation to indicate that the user has not yet been
-successfully authenticated, and in response to a failed preparatory
-operation.  This is also sent in response to an authentication or
-preparatory operation request that is not recognized or supported.
-.IP "16 SSH_CMSG_STDIN_DATA"
-.TS
-;
-l l.
-string  data
-.TE
-Delivers data from the client to be supplied as input to the shell or
-program running on the server side.  This message can only be used in
-the interactive session mode.  No acknowledgement is sent for this
-message.
-.IP "17 SSH_SMSG_STDOUT_DATA"
-.TS
-;
-l l.
-string  data
-.TE
-Delivers data from the server that was read from the standard output of
-the shell or program running on the server side.  This message can
-only be used in the interactive session mode.  No acknowledgement is
-sent for this message.
-.IP "18 SSH_SMSG_STDERR_DATA"
-.TS
-;
-l l.
-string  data
-.TE
-Delivers data from the server that was read from the standard error of
-the shell or program running on the server side.  This message can
-only be used in the interactive session mode.  No acknowledgement is
-sent for this message.
-.IP "19 SSH_CMSG_EOF"
-
-(no arguments)
-
-This message is sent by the client to indicate that EOF has been
-reached on the input.  Upon receiving this message, and after all
-buffered input data has been sent to the shell or program, the server
-will close the input file descriptor to the program.  This message can
-only be used in the interactive session mode.  No acknowledgement is
-sent for this message.
-.IP "20 SSH_SMSG_EXITSTATUS"
-.TS
-;
-l l.
-32-bit int      exit status of the command
-.TE
-Returns the exit status of the shell or program after it has exited.
-The client should respond with SSH_CMSG_EXIT_CONFIRMATION when it has
-received this message.  This will be the last message sent by the
-server.  If the program being executed dies with a signal instead of
-exiting normally, the server should terminate the session with
-SSH_MSG_DISCONNECT (which can be used to pass a human-readable string
-indicating that the program died due to a signal) instead of using
-this message.
-.IP "21 SSH_MSG_CHANNEL_OPEN_CONFIRMATION"
-.TS
-;
-l l.
-32-bit int      remote_channel
-32-bit int      local_channel
-.TE
-This is sent in response to any channel open request if the channel
-has been successfully opened.  Remote_channel is the channel number
-received in the initial open request; local_channel is the channel
-number the side sending this message has allocated for the channel.
-Data can be transmitted on the channel after this message.
-.IP "22 SSH_MSG_CHANNEL_OPEN_FAILURE"
-.TS
-;
-l l.
-32-bit int      remote_channel
-.TE
-This message indicates that an earlier channel open request by the
-other side has failed or has been denied.  Remote_channel is the
-channel number given in the original request.
-.IP "23 SSH_MSG_CHANNEL_DATA"
-.TS
-;
-l l.
-32-bit int      remote_channel
-string  data
-.TE
-Data is transmitted in a channel in these messages.  A channel is
-bidirectional, and both sides can send these messages.  There is no
-acknowledgement for these messages.  It is possible that either side
-receives these messages after it has sent SSH_MSG_CHANNEL_CLOSE for
-the channel.  These messages cannot be received after the party has
-sent or received SSH_MSG_CHANNEL_CLOSE_CONFIRMATION.
-.IP "24 SSH_MSG_CHANNEL_CLOSE"
-.TS
-;
-l l.
-32-bit int      remote_channel
-.TE
-When a channel is closed at one end of the connection, that side sends
-this message.  Upon receiving this message, the channel should be
-closed.  When this message is received, if the channel is already
-closed (the receiving side has sent this message for the same channel
-earlier), the channel is freed and no further action is taken;
-otherwise the channel is freed and SSH_MSG_CHANNEL_CLOSE_CONFIRMATION
-is sent in response.  (It is possible that the channel is closed
-simultaneously at both ends.)
-.IP "25 SSH_MSG_CHANNEL_CLOSE_CONFIRMATION"
-.TS
-;
-l l.
-32-bit int      remote_channel
-.TE
-This message is sent in response to SSH_MSG_CHANNEL_CLOSE unless the
-channel was already closed.  When this message is sent or received,
-the channel is freed.
-.IP "26 (OBSOLETED; was unix-domain X11 forwarding)
-.IP "27 SSH_SMSG_X11_OPEN"
-.TS
-;
-l l.
-32-bit int      local_channel
-string  originator_string (see below)
-.TE
-This message can be sent by the server during the interactive session
-mode to indicate that a client has connected the fake X server.
-Local_channel is the channel number that the server has allocated for
-the connection.  The client should try to open a connection to the
-real X server, and respond with SSH_MSG_CHANNEL_OPEN_CONFIRMATION or
-SSH_MSG_CHANNEL_OPEN_FAILURE.
-
-The field originator_string is present if both sides
-specified SSH_PROTOFLAG_HOST_IN_FWD_OPEN in the protocol flags.  It
-contains a description of the host originating the connection.
-.IP "28 SSH_CMSG_PORT_FORWARD_REQUEST"
-.TS
-;
-l l.
-32-bit int      server_port
-string  host_to_connect
-32-bit int      port_to_connect
-.TE
-Sent by the client in the preparatory phase, this message requests
-that server_port on the server machine be forwarded over the secure
-channel to the client machine, and from there to the specified host
-and port.  The server should start listening on the port, and send
-SSH_MSG_PORT_OPEN whenever a connection is made to it.  Supporting
-this message is optional, and the server is free to reject any forward
-request.  For example, it is highly recommended that unless the user
-has been authenticated as root, forwarding any privileged port numbers
-(below 1024) is denied.
-.IP "29 SSH_MSG_PORT_OPEN"
-.TS
-;
-l l.
-32-bit int      local_channel
-string  host_name
-32-bit int      port
-string  originator_string (see below)
-.TE
-Sent by either party in interactive session mode, this message
-indicates that a connection has been opened to a forwarded TCP/IP
-port.  Local_channel is the channel number that the sending party has
-allocated for the connection.  Host_name is the host the connection
-should be be forwarded to, and the port is the port on that host to
-connect.  The receiving party should open the connection, and respond
-with SSH_MSG_CHANNEL_OPEN_CONFIRMATION or
-SSH_MSG_CHANNEL_OPEN_FAILURE.  It is recommended that the receiving
-side check the host_name and port for validity to avoid compromising
-local security by compromised remote side software.  Particularly, it
-is recommended that the client permit connections only to those ports
-for which it has requested forwarding with SSH_CMSG_PORT_FORWARD_REQUEST.
-
-The field originator_string is present if both sides
-specified SSH_PROTOFLAG_HOST_IN_FWD_OPEN in the protocol flags.  It
-contains a description of the host originating the connection.
-.IP "30 SSH_CMSG_AGENT_REQUEST_FORWARDING"
-
-(no arguments)
-
-Requests that the connection to the authentication agent be forwarded
-over the secure channel.  The method used by clients to contact the
-authentication agent within each machine is implementation and machine
-dependent.  If the server accepts this request, it should arrange that
-any clients run from this session will actually contact the server
-program when they try to contact the authentication agent.  The server
-should then send a SSH_SMSG_AGENT_OPEN to open a channel to the agent,
-and the client should forward the connection to the real
-authentication agent.  Supporting this message is optional.
-.IP "31 SSH_SMSG_AGENT_OPEN"
-.TS
-;
-l l.
-32-bit int      local_channel
-.TE
-Sent by the server in interactive session mode, this message requests
-opening a channel to the authentication agent.  The client should open
-a channel, and respond with either SSH_MSG_CHANNEL_OPEN_CONFIRMATION
-or SSH_MSG_CHANNEL_OPEN_FAILURE.
-.IP "32 SSH_MSG_IGNORE"
-.TS
-;
-l l.
-string  data
-.TE
-Either party may send this message at any time.  This message, and the
-argument string, is silently ignored.  This message might be used in
-some implementations to make traffic analysis more difficult.  This
-message is not currently sent by the implementation, but all
-implementations are required to recognize and ignore it.
-.IP "33 SSH_CMSG_EXIT_CONFIRMATION"
-
-(no arguments)
-
-Sent by the client in response to SSH_SMSG_EXITSTATUS.  This is the
-last message sent by the client.
-.IP "34 SSH_CMSG_X11_REQUEST_FORWARDING"
-.TS
-;
-l l.
-string  x11_authentication_protocol
-string  x11_authentication_data
-32-bit int      screen number (if SSH_PROTOFLAG_SCREEN_NUMBER)
-.TE
-Sent by the client during the preparatory phase, this message requests
-that the server create a fake X11 display and set the DISPLAY
-environment variable accordingly.  An internet-domain display is
-preferable.  The given authentication protocol and the associated data
-should be recorded by the server so that it is used as authentication
-on connections (e.g., in .Xauthority).  The authentication protocol
-must be one of the supported X11 authentication protocols, e.g.,
-"MIT-MAGIC-COOKIE-1".  Authentication data must be a lowercase hex
-string of even length.  Its interpretation is protocol dependent.
-The data is in a format that can be used with e.g. the xauth program.
-Supporting this message is optional.
-
-The client is permitted (and recommended) to generate fake
-authentication information and send fake information to the server.
-This way, a corrupt server will not have access to the user's terminal
-after the connection has terminated.  The correct authorization codes
-will also not be left hanging around in files on the server (many
-users keep the same X session for months, thus protecting the
-authorization data becomes important).
-
-X11 authentication spoofing works by initially sending fake (random)
-authentication data to the server, and interpreting the first packet
-sent by the X11 client after the connection has been opened.  The
-first packet contains the client's authentication.  If the packet
-contains the correct fake data, it is replaced by the client by the
-correct authentication data, and then sent to the X server.
-.IP "35 SSH_CMSG_AUTH_RHOSTS_RSA"
-.TS
-;
-l l.
-string  clint-side user name
-32-bit int      client_host_key_bits
-mp-int  client_host_key_public_exponent
-mp-int  client_host_key_public_modulus
-.TE
-Requests authentication using /etc/hosts.equiv and .rhosts (or
-equivalent) together with RSA host authentication.  The server should
-check that the client side port number is less than 1024 (a privileged
-port), and immediately reject authentication if it is not.  The server
-responds with SSH_SMSG_FAILURE or SSH_SMSG_AUTH_RSA_CHALLENGE.  The
-client must respond to the challenge with the proper
-SSH_CMSG_AUTH_RSA_RESPONSE.  The server then responds with success if
-access was granted, or failure if the client gave a wrong response.
-Supporting this authentication method is optional but recommended in
-most environments.
-.IP "36 SSH_MSG_DEBUG"
-.TS
-;
-l l.
-string  debugging message sent to the other side
-.TE
-This message may be sent by either party at any time.  It is used to
-send debugging messages that may be informative to the user in
-solving various problems.  For example, if authentication fails
-because of some configuration error (e.g., incorrect permissions for
-some file), it can be very helpful for the user to make the cause of
-failure available.  On the other hand, one should not make too much
-information available for security reasons.  It is recommended that
-the client provides an option to display the debugging information
-sent by the sender (the user probably does not want to see it by default).
-The server can log debugging data sent by the client (if any).  Either
-party is free to ignore any received debugging data.  Every
-implementation must be able to receive this message, but no
-implementation is required to send these.
-.IP "37 SSH_CMSG_REQUEST_COMPRESSION"
-.TS
-;
-l l.
-32-bit int      gzip compression level (1-9)
-.TE
-This message can be sent by the client in the preparatory operations
-phase.  The server responds with SSH_SMSG_FAILURE if it does not
-support compression or does not want to compress; it responds with
-SSH_SMSG_SUCCESS if it accepted the compression request.  In the
-latter case the response to this packet will still be uncompressed,
-but all further packets in either direction will be compressed by gzip.
-.RT
-
-
-.ti 0
-Encoding of Terminal Modes
-
-Terminal modes (as passed in SSH_CMSG_REQUEST_PTY) are encoded into a
-byte stream.  It is intended that the coding be portable across
-different environments.
-
-The tty mode description is a stream of bytes.  The stream consists of
-opcode-argument pairs.  It is terminated by opcode TTY_OP_END (0).
-Opcodes 1-127 have one-byte arguments.  Opcodes 128-159 have 32-bit
-integer arguments (stored msb first).  Opcodes 160-255 are not yet
-defined, and cause parsing to stop (they should only be used after any
-other data).
-
-The client puts in the stream any modes it knows about, and the server
-ignores any modes it does not know about.  This allows some degree of
-machine-independence, at least between systems that use a POSIX-like
-[POSIX] tty interface.  The protocol can support other systems as
-well, but the client may need to fill reasonable values for a number
-of parameters so the server pty gets set to a reasonable mode (the
-server leaves all unspecified mode bits in their default values, and
-only some combinations make sense).
-
-The following opcodes have been defined.  The naming of opcodes mostly
-follows the POSIX terminal mode flags.
-.IP "0 TTY_OP_END"
-Indicates end of options.
-.IP "1 VINTR"
-Interrupt character; 255 if none.  Similarly for the other characters.
-Not all of these characters are supported on all systems.
-.IP "2 VQUIT"
-The quit character (sends SIGQUIT signal on UNIX systems).
-.IP "3 VERASE"
-Erase the character to left of the cursor.
-.IP "4 VKILL"
-Kill the current input line.
-.IP "5 VEOF "
-End-of-file character (sends EOF from the terminal).
-.IP "6 VEOL "
-End-of-line character in addition to carriage return and/or linefeed.
-.IP "7 VEOL2"
-Additional end-of-line character.
-.IP "8 VSTART"
-Continues paused output (normally ^Q).
-.IP "9 VSTOP"
-Pauses output (^S).
-.IP "10 VSUSP"
-Suspends the current program.
-.IP "11 VDSUSP"
-Another suspend character.
-.IP "12 VREPRINT"
-Reprints the current input line.
-.IP "13 VWERASE"
-Erases a word left of cursor.
-.IP "14 VLNEXT"
-More special input characters; these are probably not supported on
-most systems.
-.IP "15 VFLUSH"
-.IP "16 VSWTCH"
-.IP "17 VSTATUS"
-.IP "18 VDISCARD"
-
-.IP "30 IGNPAR"
-The ignore parity flag.  The next byte should be 0 if this flag is not
-set, and 1 if it is set.
-.IP "31 PARMRK"
-More flags.  The exact definitions can be found in the POSIX standard.
-.IP "32 INPCK"
-.IP "33 ISTRIP"
-.IP "34 INLCR"
-.IP "35 IGNCR"
-.IP "36 ICRNL"
-.IP "37 IUCLC"
-.IP "38 IXON"
-.IP "39 IXANY"
-.IP "40 IXOFF"
-.IP "41 IMAXBEL"
-
-.IP "50 ISIG"
-.IP "51 ICANON"
-.IP "52 XCASE"
-.IP "53 ECHO"
-.IP "54 ECHOE"
-.IP "55 ECHOK"
-.IP "56 ECHONL"
-.IP "57 NOFLSH"
-.IP "58 TOSTOP"
-.IP "59 IEXTEN"
-.IP "60 ECHOCTL"
-.IP "61 ECHOKE"
-.IP "62 PENDIN"
-
-.IP "70 OPOST"
-.IP "71 OLCUC"
-.IP "72 ONLCR"
-.IP "73 OCRNL"
-.IP "74 ONOCR"
-.IP "75 ONLRET"
-
-.IP "90 CS7"
-.IP "91 CS8"
-.IP "92 PARENB"
-.IP "93 PARODD"
-
-.IP "192 TTY_OP_ISPEED"
-Specifies the input baud rate in bits per second.
-.IP "193 TTY_OP_OSPEED"
-Specifies the output baud rate in bits per second.
-.RT
-
-
-.ti 0
-The Authentication Agent Protocol
-
-The authentication agent is a program that can be used to hold RSA
-authentication keys for the user (in future, it might hold data for
-other authentication types as well).  An authorized program can send
-requests to the agent to generate a proper response to an RSA
-challenge.  How the connection is made to the agent (or its
-representative) inside a host and how access control is done inside a
-host is implementation-dependent; however, how it is forwarded and how
-one interacts with it is specified in this protocol.  The connection
-to the agent is normally automatically forwarded over the secure
-channel.
-
-A program that wishes to use the agent first opens a connection to its
-local representative (typically, the agent itself or an SSH server).
-It then writes a request to the connection, and waits for response.
-It is recommended that at least five minutes of timeout are provided
-waiting for the agent to respond to an authentication challenge (this
-gives sufficient time for the user to cut-and-paste the challenge to a
-separate machine, perform the computation there, and cut-and-paste the
-result back if so desired).
-
-Messages sent to and by the agent are in the following format:
-.TS
-;
-l l.
-4 bytes Length, msb first.  Does not include length itself.
-1 byte  Packet type.  The value 255 is reserved for future extensions.
-data    Any data, depending on packet type.  Encoding as in the ssh packet
-protocol.
-.TE
-
-The following message types are currently defined:
-.IP "1 SSH_AGENTC_REQUEST_RSA_IDENTITIES"
-
-(no arguments)
-
-Requests the agent to send a list of all RSA keys for which it can
-answer a challenge.
-.IP "2 SSH_AGENT_RSA_IDENTITIES_ANSWER"
-.TS
-;
-l l.
-32-bit int      howmany
-howmany times:
-32-bit int      bits
-mp-int  public exponent
-mp-int  public modulus
-string  comment
-.TE
-The agent sends this message in response to the to
-SSH_AGENTC_REQUEST_RSA_IDENTITIES.  The answer lists all RSA keys for
-which the agent can answer a challenge.  The comment field is intended
-to help identify each key; it may be printed by an application to
-indicate which key is being used.  If the agent is not holding any
-keys, howmany will be zero.
-.IP "3 SSH_AGENTC_RSA_CHALLENGE
-.TS
-;
-l l.
-32-bit int      bits
-mp-int  public exponent
-mp-int  public modulus
-mp-int  challenge
-16 bytes        session_id
-32-bit int      response_type
-.TE
-Requests RSA decryption of random challenge to authenticate the other
-side.  The challenge will be decrypted with the RSA private key
-corresponding to the given public key.
-
-The decrypted challenge must contain a zero in the highest (partial)
-byte, 2 in the next byte, followed by non-zero random bytes, a zero
-byte, and then the real challenge value in the lowermost bytes.  The
-real challenge must be 32 8-bit bytes (256 bits).
-
-Response_type indicates the format of the response to be returned.
-Currently the only supported value is 1, which means to compute MD5 of
-the real challenge plus session id, and return the resulting 16 bytes
-in a SSH_AGENT_RSA_RESPONSE message.
-.IP "4 SSH_AGENT_RSA_RESPONSE"
-.TS
-;
-l l.
-16 bytes        MD5 of decrypted challenge
-.TE
-Answers an RSA authentication challenge.  The response is 16 bytes:
-the MD5 checksum of the 32-byte challenge.
-.IP "5 SSH_AGENT_FAILURE"
-
-(no arguments)
-
-This message is sent whenever the agent fails to answer a request
-properly.  For example, if the agent cannot answer a challenge (e.g.,
-no longer has the proper key), it can respond with this.  The agent
-also responds with this message if it receives a message it does not
-recognize.
-.IP "6 SSH_AGENT_SUCCESS"
-
-(no arguments)
-
-This message is sent by the agent as a response to certain requests
-that do not otherwise cause a message be sent.  Currently, this is
-only sent in response to SSH_AGENTC_ADD_RSA_IDENTITY and
-SSH_AGENTC_REMOVE_RSA_IDENTITY.
-.IP "7 SSH_AGENTC_ADD_RSA_IDENTITY"
-.TS
-;
-l l.
-32-bit int      bits
-mp-int  public modulus
-mp-int  public exponent
-mp-int  private exponent
-mp-int  multiplicative inverse of p mod q
-mp-int  p
-mp-int  q
-string  comment
-.TE
-Registers an RSA key with the agent.  After this request, the agent can
-use this RSA key to answer requests.  The agent responds with
-SSH_AGENT_SUCCESS or SSH_AGENT_FAILURE.
-.IP "8 SSH_AGENT_REMOVE_RSA_IDENTITY"
-.TS
-;
-l l.
-32-bit int      bits
-mp-int  public exponent
-mp-int  public modulus
-.TE
-Removes an RSA key from the agent.  The agent will no longer accept
-challenges for this key and will not list it as a supported identity.
-The agent responds with SSH_AGENT_SUCCESS or SSH_AGENT_FAILURE.
-.RT
-
-If the agent receives a message that it does not understand, it
-responds with SSH_AGENT_FAILURE.  This permits compatible future
-extensions.
-
-It is possible that several clients have a connection open to the
-authentication agent simultaneously.  Each client will use a separate
-connection (thus, any SSH connection can have multiple agent
-connections active simultaneously).
-
-
-.ti 0
-References
-
-.IP "[DES] "
-FIPS PUB 46-1: Data Encryption Standard.  National Bureau of
-Standards, January 1988.  FIPS PUB 81: DES Modes of Operation.
-National Bureau of Standards, December 1980.  Bruce Schneier: Applied
-Cryptography.  John Wiley & Sons, 1994.  J. Seberry and J. Pieprzyk:
-Cryptography: An Introduction to Computer Security.  Prentice-Hall,
-1989.
-.IP "[GZIP] "
-The GNU GZIP program; available for anonymous ftp at prep.ai.mit.edu.
-Please let me know if you know a paper describing the algorithm.
-.IP "[IDEA] "
-Xuejia Lai: On the Design and Security of Block Ciphers, ETH Series in
-Information Processing, vol. 1, Hartung-Gorre Verlag, Konstanz,
-Switzerland, 1992.  Bruce Schneier: Applied Cryptography, John Wiley &
-Sons, 1994.  See also the following patents: PCT/CH91/00117, EP 0 482
-154 B1, US Pat. 5,214,703.
-.IP [PKCS#1]
-PKCS #1: RSA Encryption Standard.  Version 1.5, RSA Laboratories,
-November 1993.  Available for anonymous ftp at ftp.rsa.com.
-.IP [POSIX]
-Portable Operating System Interface (POSIX) - Part 1: Application
-Program Interface (API) [C language], ISO/IEC 9945-1, IEEE Std 1003.1,
-1990.
-.IP [RFC0791]
-J. Postel: Internet Protocol, RFC 791, USC/ISI, September 1981.
-.IP [RFC0793]
-J. Postel: Transmission Control Protocol, RFC 793, USC/ISI, September
-1981.
-.IP [RFC1034]
-P. Mockapetris: Domain Names - Concepts and Facilities, RFC 1034,
-USC/ISI, November 1987.
-.IP [RFC1282]
-B. Kantor: BSD Rlogin, RFC 1258, UCSD, December 1991.
-.IP "[RSA] "
-Bruce Schneier: Applied Cryptography.  John Wiley & Sons, 1994.  See
-also R. Rivest, A. Shamir, and L. M. Adleman: Cryptographic
-Communications System and Method.  US Patent 4,405,829, 1983.
-.IP "[X11] "
-R. Scheifler: X Window System Protocol, X Consortium Standard, Version
-11, Release 6.  Massachusetts Institute of Technology, Laboratory of
-Computer Science, 1994.
-.RT
-
-
-.ti 0
-Security Considerations
-
-This protocol deals with the very issue of user authentication and
-security.
-
-First of all, as an implementation issue, the server program will have
-to run as root (or equivalent) on the server machine.  This is because
-the server program will need be able to change to an arbitrary user
-id.  The server must also be able to create a privileged TCP/IP port.
-
-The client program will need to run as root if any variant of .rhosts
-authentication is to be used.  This is because the client program will
-need to create a privileged port.  The client host key is also usually
-stored in a file which is readable by root only.  The client needs the
-host key in .rhosts authentication only.  Root privileges can be
-dropped as soon as the privileged port has been created and the host
-key has been read.
-
-The SSH protocol offers major security advantages over existing telnet
-and rlogin protocols.
-.IP o
-IP spoofing is restricted to closing a connection (by encryption, host
-keys, and the special random cookie).  If encryption is not used, IP
-spoofing is possible for those who can hear packets going out from the
-server.
-.IP o
-DNS spoofing is made ineffective (by host keys).
-.IP o
-Routing spoofing is made ineffective (by host keys).
-.IP o
-All data is encrypted with strong algorithms to make eavesdropping as
-difficult as possible.  This includes encrypting any authentication
-information such as passwords.  The information for decrypting session
-keys is destroyed every hour.
-.IP o
-Strong authentication methods: .rhosts combined with RSA host
-authentication, and pure RSA authentication.
-.IP o
-X11 connections and arbitrary TCP/IP ports can be forwarded securely.
-.IP o
-Man-in-the-middle attacks are deterred by using the server host key to
-encrypt the session key.
-.IP o
-Trojan horses to catch a password by routing manipulation are deterred
-by checking that the host key of the server machine matches that
-stored on the client host.
-.RT
-
-The security of SSH against man-in-the-middle attacks and the security
-of the new form of .rhosts authentication, as well as server host
-validation, depends on the integrity of the host key and the files
-containing known host keys.
-
-The host key is normally stored in a root-readable file.  If the host
-key is compromised, it permits attackers to use IP, DNS and routing
-spoofing as with current rlogin and rsh.  It should never be any worse
-than the current situation.
-
-The files containing known host keys are not sensitive.  However, if an
-attacker gets to modify the known host key files, it has the same
-consequences as a compromised host key, because the attacker can then
-change the recorded host key.
-
-The security improvements obtained by this protocol for X11 are of
-particular significance.  Previously, there has been no way to protect
-data communicated between an X server and a client running on a remote
-machine.  By creating a fake display on the server, and forwarding all
-X11 requests over the secure channel, SSH can be used to run any X11
-applications securely without any cooperation with the vendors of the
-X server or the application.
-
-Finally, the security of this program relies on the strength of the
-underlying cryptographic algorithms.  The RSA algorithm is used for
-authentication key exchange.  It is widely believed to be secure.  Of
-the algorithms used to encrypt the session, DES has a rather small key
-these days, probably permitting governments and organized criminals to
-break it in very short time with specialized hardware.  3DES is
-probably safe (but slower).  IDEA is widely believed to be secure.
-People have varying degrees of confidence in the other algorithms.
-This program is not secure if used with no encryption at all.
-
-
-.ti 0
-Additional Information
-
-Additional information (especially on the implementation and mailing
-lists) is available via WWW at http://www.cs.hut.fi/ssh.
-
-Comments should be sent to Tatu Ylonen <ylo@cs.hut.fi> or the SSH
-Mailing List <ssh@clinet.fi>.
-
-.ti 0
-Author's Address
-
-.TS
-;
-l.
-Tatu Ylonen
-Helsinki University of Technology
-Otakaari 1
-FIN-02150 Espoo, Finland
-
-Phone: +358-0-451-3374
-Fax: +358-0-451-3293
-EMail: ylo@cs.hut.fi
-.TE
diff --git a/auth-krb4.c b/auth-krb4.c
deleted file mode 100644
index b28df469f..000000000
--- a/auth-krb4.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * Copyright (c) 1999 Dug Song.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "includes.h"
-RCSID("$OpenBSD: auth-krb4.c,v 1.29 2003/02/21 10:34:48 mpech Exp $");
-
-#include "ssh.h"
-#include "ssh1.h"
-#include "packet.h"
-#include "xmalloc.h"
-#include "log.h"
-#include "servconf.h"
-#include "uidswap.h"
-#include "auth.h"
-
-#ifdef AFS
-#include "radix.h"
-#endif
-
-#ifdef KRB4
-extern ServerOptions options;
-
-static int
-krb4_init(void *context)
-{
-        static int cleanup_registered = 0;
-        Authctxt *authctxt = (Authctxt *)context;
-        const char *tkt_root = TKT_ROOT;
-        struct stat st;
-        int fd;
-
-        if (!authctxt->krb4_ticket_file) {
-                /* Set unique ticket string manually since we're still root. */
-                authctxt->krb4_ticket_file = xmalloc(MAXPATHLEN);
-#ifdef AFS
-                if (lstat("/ticket", &st) != -1)
-                        tkt_root = "/ticket/";
-#endif /* AFS */
-                snprintf(authctxt->krb4_ticket_file, MAXPATHLEN, "%s%u_%ld",
-                    tkt_root, authctxt->pw->pw_uid, (long)getpid());
-                krb_set_tkt_string(authctxt->krb4_ticket_file);
-        }
-        /* Register ticket cleanup in case of fatal error. */
-        if (!cleanup_registered) {
-                fatal_add_cleanup(krb4_cleanup_proc, authctxt);
-                cleanup_registered = 1;
-        }
-        /* Try to create our ticket file. */
-        if ((fd = mkstemp(authctxt->krb4_ticket_file)) != -1) {
-                close(fd);
-                return (1);
-        }
-        /* Ticket file exists - make sure user owns it (just passed ticket). */
-        if (lstat(authctxt->krb4_ticket_file, &st) != -1) {
-                if (st.st_mode == (S_IFREG | S_IRUSR | S_IWUSR) &&
-                    st.st_uid == authctxt->pw->pw_uid)
-                        return (1);
-        }
-        /* Failure - cancel cleanup function, leaving ticket for inspection. */
-        log("WARNING: bad ticket file %s", authctxt->krb4_ticket_file);
-
-        fatal_remove_cleanup(krb4_cleanup_proc, authctxt);
-        cleanup_registered = 0;
-
-        xfree(authctxt->krb4_ticket_file);
-        authctxt->krb4_ticket_file = NULL;
-
-        return (0);
-}
-
-/*
- * try krb4 authentication,
- * return 1 on success, 0 on failure, -1 if krb4 is not available
- */
-int
-auth_krb4_password(Authctxt *authctxt, const char *password)
-{
-        AUTH_DAT adata;
-        KTEXT_ST tkt;
-        struct hostent *hp;
-        struct passwd *pw;
-        char localhost[MAXHOSTNAMELEN], phost[INST_SZ], realm[REALM_SZ];
-        u_int32_t faddr;
-        int r;
-
-        if ((pw = authctxt->pw) == NULL)
-                return (0);
-
-        /*
-         * Try Kerberos password authentication only for non-root
-         * users and only if Kerberos is installed.
-         */
-        if (pw->pw_uid != 0 && krb_get_lrealm(realm, 1) == KSUCCESS) {
-                /* Set up our ticket file. */
-                if (!krb4_init(authctxt)) {
-                        log("Couldn't initialize Kerberos ticket file for %s!",
-                            pw->pw_name);
-                        goto failure;
-                }
-                /* Try to get TGT using our password. */
-                r = krb_get_pw_in_tkt((char *) pw->pw_name, "", realm,
-                    "krbtgt", realm, DEFAULT_TKT_LIFE, (char *)password);
-                if (r != INTK_OK) {
-                        debug("Kerberos v4 password authentication for %s "
-                            "failed: %s", pw->pw_name, krb_err_txt[r]);
-                        goto failure;
-                }
-                /* Successful authentication. */
-                chown(tkt_string(), pw->pw_uid, pw->pw_gid);
-
-                /*
-                 * Now that we have a TGT, try to get a local
-                 * "rcmd" ticket to ensure that we are not talking
-                 * to a bogus Kerberos server.
-                 */
-                gethostname(localhost, sizeof(localhost));
-                strlcpy(phost, (char *)krb_get_phost(localhost),
-                    sizeof(phost));
-                r = krb_mk_req(&tkt, KRB4_SERVICE_NAME, phost, realm, 33);
-
-                if (r == KSUCCESS) {
-                        if ((hp = gethostbyname(localhost)) == NULL) {
-                                log("Couldn't get local host address!");
-                                goto failure;
-                        }
-                        memmove((void *)&faddr, (void *)hp->h_addr,
-                            sizeof(faddr));
-
-                        /* Verify our "rcmd" ticket. */
-                        r = krb_rd_req(&tkt, KRB4_SERVICE_NAME, phost,
-                            faddr, &adata, "");
-                        if (r == RD_AP_UNDEC) {
-                                /*
-                                 * Probably didn't have a srvtab on
-                                 * localhost. Disallow login.
-                                 */
-                                log("Kerberos v4 TGT for %s unverifiable, "
-                                    "no srvtab installed? krb_rd_req: %s",
-                                    pw->pw_name, krb_err_txt[r]);
-                                goto failure;
-                        } else if (r != KSUCCESS) {
-                                log("Kerberos v4 %s ticket unverifiable: %s",
-                                    KRB4_SERVICE_NAME, krb_err_txt[r]);
-                                goto failure;
-                        }
-                } else if (r == KDC_PR_UNKNOWN) {
-                        /*
-                         * Disallow login if no rcmd service exists, and
-                         * log the error.
-                         */
-                        log("Kerberos v4 TGT for %s unverifiable: %s; %s.%s "
-                            "not registered, or srvtab is wrong?", pw->pw_name,
-                            krb_err_txt[r], KRB4_SERVICE_NAME, phost);
-                        goto failure;
-                } else {
-                        /*
-                         * TGT is bad, forget it. Possibly spoofed!
-                         */
-                        debug("WARNING: Kerberos v4 TGT possibly spoofed "
-                            "for %s: %s", pw->pw_name, krb_err_txt[r]);
-                        goto failure;
-                }
-                /* Authentication succeeded. */
-                return (1);
-        } else
-                /* Logging in as root or no local Kerberos realm. */
-                debug("Unable to authenticate to Kerberos.");
-
- failure:
-        krb4_cleanup_proc(authctxt);
-
-        if (!options.kerberos_or_local_passwd)
-                return (0);
-
-        /* Fall back to ordinary passwd authentication. */
-        return (-1);
-}
-
-void
-krb4_cleanup_proc(void *context)
-{
-        Authctxt *authctxt = (Authctxt *)context;
-        debug("krb4_cleanup_proc called");
-        if (authctxt->krb4_ticket_file) {
-                (void) dest_tkt();
-                xfree(authctxt->krb4_ticket_file);
-                authctxt->krb4_ticket_file = NULL;
-        }
-}
-
-int
-auth_krb4(Authctxt *authctxt, KTEXT auth, char **client, KTEXT reply)
-{
-        AUTH_DAT adat = {0};
-        Key_schedule schedule;
-        struct sockaddr_in local, foreign;
-        char instance[INST_SZ];
-        socklen_t slen;
-        u_int cksum;
-        int r, s;
-
-        s = packet_get_connection_in();
-
-        slen = sizeof(local);
-        memset(&local, 0, sizeof(local));
-        if (getsockname(s, (struct sockaddr *) & local, &slen) < 0)
-                debug("getsockname failed: %.100s", strerror(errno));
-        slen = sizeof(foreign);
-        memset(&foreign, 0, sizeof(foreign));
-        if (getpeername(s, (struct sockaddr *) & foreign, &slen) < 0) {
-                debug("getpeername failed: %.100s", strerror(errno));
-                fatal_cleanup();
-        }
-        instance[0] = '*';
-        instance[1] = 0;
-
-        /* Get the encrypted request, challenge, and session key. */
-        if ((r = krb_rd_req(auth, KRB4_SERVICE_NAME, instance,
-            0, &adat, ""))) {
-                debug("Kerberos v4 krb_rd_req: %.100s", krb_err_txt[r]);
-                return (0);
-        }
-        des_key_sched((des_cblock *) adat.session, schedule);
-
-        *client = xmalloc(MAX_K_NAME_SZ);
-        (void) snprintf(*client, MAX_K_NAME_SZ, "%s%s%s@%s", adat.pname,
-            *adat.pinst ? "." : "", adat.pinst, adat.prealm);
-
-        /* Check ~/.klogin authorization now. */
-        if (kuserok(&adat, authctxt->user) != KSUCCESS) {
-                log("Kerberos v4 .klogin authorization failed for %s to "
-                    "account %s", *client, authctxt->user);
-                xfree(*client);
-                *client = NULL;
-                return (0);
-        }
-        /* Increment the checksum, and return it encrypted with the
-           session key. */
-        cksum = adat.checksum + 1;
-        cksum = htonl(cksum);
-
-        /* If we can't successfully encrypt the checksum, we send back an
-           empty message, admitting our failure. */
-        if ((r = krb_mk_priv((u_char *) & cksum, reply->dat, sizeof(cksum) + 1,
-            schedule, &adat.session, &local, &foreign)) < 0) {
-                debug("Kerberos v4 mk_priv: (%d) %s", r, krb_err_txt[r]);
-                reply->dat[0] = 0;
-                reply->length = 0;
-        } else
-                reply->length = r;
-
-        /* Clear session key. */
-        memset(&adat.session, 0, sizeof(adat.session));
-        return (1);
-}
-#endif /* KRB4 */
-
-#ifdef AFS
-int
-auth_krb4_tgt(Authctxt *authctxt, const char *string)
-{
-        CREDENTIALS creds;
-        struct passwd *pw;
-
-        if ((pw = authctxt->pw) == NULL)
-                goto failure;
-
-        temporarily_use_uid(pw);
-
-        if (!radix_to_creds(string, &creds)) {
-                log("Protocol error decoding Kerberos v4 TGT");
-                goto failure;
-        }
-        if (strncmp(creds.service, "", 1) == 0) /* backward compatibility */
-                strlcpy(creds.service, "krbtgt", sizeof creds.service);
-
-        if (strcmp(creds.service, "krbtgt")) {
-                log("Kerberos v4 TGT (%s%s%s@%s) rejected for %s",
-                    creds.pname, creds.pinst[0] ? "." : "", creds.pinst,
-                    creds.realm, pw->pw_name);
-                goto failure;
-        }
-        if (!krb4_init(authctxt))
-                goto failure;
-
-        if (in_tkt(creds.pname, creds.pinst) != KSUCCESS)
-                goto failure;
-
-        if (save_credentials(creds.service, creds.instance, creds.realm,
-            creds.session, creds.lifetime, creds.kvno, &creds.ticket_st,
-            creds.issue_date) != KSUCCESS) {
-                debug("Kerberos v4 TGT refused: couldn't save credentials");
-                goto failure;
-        }
-        /* Successful authentication, passed all checks. */
-        chown(tkt_string(), pw->pw_uid, pw->pw_gid);
-
-        debug("Kerberos v4 TGT accepted (%s%s%s@%s)",
-            creds.pname, creds.pinst[0] ? "." : "", creds.pinst, creds.realm);
-        memset(&creds, 0, sizeof(creds));
-
-        restore_uid();
-
-        return (1);
-
- failure:
-        krb4_cleanup_proc(authctxt);
-        memset(&creds, 0, sizeof(creds));
-        restore_uid();
-
-        return (0);
-}
-
-int
-auth_afs_token(Authctxt *authctxt, const char *token_string)
-{
-        CREDENTIALS creds;
-        struct passwd *pw;
-        uid_t uid;
-
-        if ((pw = authctxt->pw) == NULL)
-                return (0);
-
-        if (!radix_to_creds(token_string, &creds)) {
-                log("Protocol error decoding AFS token");
-                return (0);
-        }
-        if (strncmp(creds.service, "", 1) == 0) /* backward compatibility */
-                strlcpy(creds.service, "afs", sizeof creds.service);
-
-        if (strncmp(creds.pname, "AFS ID ", 7) == 0)
-                uid = atoi(creds.pname + 7);
-        else
-                uid = pw->pw_uid;
-
-        if (kafs_settoken(creds.realm, uid, &creds)) {
-                log("AFS token (%s@%s) rejected for %s",
-                    creds.pname, creds.realm, pw->pw_name);
-                memset(&creds, 0, sizeof(creds));
-                return (0);
-        }
-        debug("AFS token accepted (%s@%s)", creds.pname, creds.realm);
-        memset(&creds, 0, sizeof(creds));
-
-        return (1);
-}
-#endif /* AFS */
diff --git a/auth-pam.c b/auth-pam.c
index b93241f48..147f4f8bb 100644
--- a/auth-pam.c
+++ b/auth-pam.c
@@ -185,6 +185,7 @@ static int sshpam_cred_established = 0;
 static int sshpam_account_status = -1;
 static char **sshpam_env = NULL;
 static Authctxt *sshpam_authctxt = NULL;
+static char badpw[] = "\b\n\r\177INCORRECT";
 static const char *sshpam_password = NULL;
 
 /* Some PAM implementations don't implement this */
@@ -696,7 +697,12 @@ sshpam_respond(void *ctx, u_int num, char **resp)
                 return (-1);
         }
         buffer_init(&buffer);
-        buffer_put_cstring(&buffer, *resp);
+        if (sshpam_authctxt->valid &&
+            (sshpam_authctxt->pw->pw_uid != 0 ||
+             options.permit_root_login == PERMIT_YES))
+                buffer_put_cstring(&buffer, *resp);
+        else
+                buffer_put_cstring(&buffer, badpw);
         if (ssh_msg_send(ctxt->pam_psock, PAM_AUTHTOK, &buffer) == -1) {
                 buffer_free(&buffer);
                 return (-1);
@@ -1075,7 +1081,6 @@ sshpam_auth_passwd(Authctxt *authctxt, const char *password)
 {
         int flags = (options.permit_empty_passwd == 0 ?
             PAM_DISALLOW_NULL_AUTHTOK : 0);
-        static char badpw[] = "\b\n\r\177INCORRECT";
 
         if (!options.use_pam || sshpam_handle == NULL)
                 fatal("PAM: %s called when PAM disabled or failed to "
diff --git a/auth2-chall.c b/auth2-chall.c
index 486baaaa3..f5f2f1477 100644
--- a/auth2-chall.c
+++ b/auth2-chall.c
@@ -274,12 +274,9 @@ input_userauth_info_response(int type, u_int32_t seq, void *ctxt)
         }
         packet_check_eom();
 
-        if (authctxt->valid) {
-                res = kbdintctxt->device->respond(kbdintctxt->ctxt,
-                    nresp, response);
-        } else {
-                res = -1;
-        }
+        res = kbdintctxt->device->respond(kbdintctxt->ctxt, nresp, response);
+        if (!authctxt->valid)
+                res = 1;        /* keep going if login invalid */
 
         for (i = 0; i < nresp; i++) {
                 memset(response[i], 'r', strlen(response[i]));
@@ -291,7 +288,7 @@ input_userauth_info_response(int type, u_int32_t seq, void *ctxt)
         switch (res) {
         case 0:
                 /* Success! */
-                authenticated = 1;
+                authenticated = authctxt->valid ? 1 : 0;
                 break;
         case 1:
                 /* Authentication needs further interaction */
diff --git a/auth2-pam.c b/auth2-pam.c
deleted file mode 100644
index ac28fb245..000000000
--- a/auth2-pam.c
+++ /dev/null
@@ -1,165 +0,0 @@
-#include "includes.h"
-RCSID("$Id: auth2-pam.c,v 1.15 2003/01/08 01:37:03 djm Exp $");
-
-#ifdef USE_PAM
-#include <security/pam_appl.h>
-
-#include "ssh.h"
-#include "ssh2.h"
-#include "auth.h"
-#include "auth-pam.h"
-#include "packet.h"
-#include "xmalloc.h"
-#include "dispatch.h"
-#include "log.h"
-
-static int do_pam_conversation_kbd_int(int num_msg, 
-    const struct pam_message **msg, struct pam_response **resp, 
-    void *appdata_ptr);
-void input_userauth_info_response_pam(int type, u_int32_t seqnr, void *ctxt);
-
-struct {
-        int finished, num_received, num_expected;
-        int *prompts;
-        struct pam_response *responses;
-} context_pam2 = {0, 0, 0, NULL};
-
-static struct pam_conv conv2 = {
-        do_pam_conversation_kbd_int,
-        NULL,
-};
-
-int
-auth2_pam(Authctxt *authctxt)
-{
-        int retval = -1;
-
-        if (authctxt->user == NULL)
-                fatal("auth2_pam: internal error: no user");
-
-        conv2.appdata_ptr = authctxt;
-        do_pam_set_conv(&conv2);
-
-        dispatch_set(SSH2_MSG_USERAUTH_INFO_RESPONSE,
-            &input_userauth_info_response_pam);
-        retval = (do_pam_authenticate(0) == PAM_SUCCESS);
-        dispatch_set(SSH2_MSG_USERAUTH_INFO_RESPONSE, NULL);
-
-        return retval;
-}
-
-static int
-do_pam_conversation_kbd_int(int num_msg, const struct pam_message **msg,
-    struct pam_response **resp, void *appdata_ptr)
-{
-        int i, j, done;
-        char *text;
-
-        context_pam2.finished = 0;
-        context_pam2.num_received = 0;
-        context_pam2.num_expected = 0;
-        context_pam2.prompts = xmalloc(sizeof(int) * num_msg);
-        context_pam2.responses = xmalloc(sizeof(struct pam_response) * num_msg);
-        memset(context_pam2.responses, 0, sizeof(struct pam_response) * num_msg);
-
-        text = NULL;
-        for (i = 0, context_pam2.num_expected = 0; i < num_msg; i++) {
-                int style = PAM_MSG_MEMBER(msg, i, msg_style);
-                switch (style) {
-                case PAM_PROMPT_ECHO_ON:
-                case PAM_PROMPT_ECHO_OFF:
-                        context_pam2.num_expected++;
-                        break;
-                case PAM_TEXT_INFO:
-                case PAM_ERROR_MSG:
-                default:
-                        /* Capture all these messages to be sent at once */
-                        message_cat(&text, PAM_MSG_MEMBER(msg, i, msg));
-                        break;
-                }
-        }
-
-        if (context_pam2.num_expected == 0)
-                return PAM_SUCCESS;
-
-        packet_start(SSH2_MSG_USERAUTH_INFO_REQUEST);
-        packet_put_cstring(""); /* Name */
-        packet_put_cstring(""); /* Instructions */
-        packet_put_cstring(""); /* Language */
-        packet_put_int(context_pam2.num_expected);
-        
-        for (i = 0, j = 0; i < num_msg; i++) {
-                int style = PAM_MSG_MEMBER(msg, i, msg_style);
-                
-                /* Skip messages which don't need a reply */
-                if (style != PAM_PROMPT_ECHO_ON && style != PAM_PROMPT_ECHO_OFF)
-                        continue;
-                
-                context_pam2.prompts[j++] = i;
-                if (text) {
-                        message_cat(&text, PAM_MSG_MEMBER(msg, i, msg));
-                        packet_put_cstring(text);
-                        text = NULL;
-                } else
-                        packet_put_cstring(PAM_MSG_MEMBER(msg, i, msg));
-                packet_put_char(style == PAM_PROMPT_ECHO_ON);
-        }
-        packet_send();
-        packet_write_wait();
-
-        /*
-         * Grabbing control of execution and spinning until we get what
-         * we want is probably rude, but it seems to work properly, and
-         * the client *should* be in lock-step with us, so the loop should
-         * only be traversed once.
-         */
-        while(context_pam2.finished == 0) {
-                done = 1;
-                dispatch_run(DISPATCH_BLOCK, &done, appdata_ptr);
-                if (context_pam2.finished == 0)
-                        debug("extra packet during conversation");
-        }
-
-        if (context_pam2.num_received == context_pam2.num_expected) {
-                *resp = context_pam2.responses;
-                return PAM_SUCCESS;
-        } else
-                return PAM_CONV_ERR;
-}
-
-void
-input_userauth_info_response_pam(int type, u_int32_t seqnr, void *ctxt)
-{
-        Authctxt *authctxt = ctxt;
-        unsigned int nresp = 0, rlen = 0, i = 0;
-        char *resp;
-
-        if (authctxt == NULL)
-                fatal("input_userauth_info_response_pam: no authentication context");
-
-        nresp = packet_get_int();       /* Number of responses. */
-        debug("got %d responses", nresp);
-
-
-        if (nresp != context_pam2.num_expected)
-                fatal("%s: Received incorrect number of responses "
-                    "(expected %d, received %u)", __func__, 
-                    context_pam2.num_expected, nresp);
-
-        if (nresp > 100)
-                fatal("%s: too many replies", __func__);
-
-        for (i = 0; i < nresp; i++) {
-                int j = context_pam2.prompts[i];
-
-                resp = packet_get_string(&rlen);
-                context_pam2.responses[j].resp_retcode = PAM_SUCCESS;
-                context_pam2.responses[j].resp = resp;
-                context_pam2.num_received++;
-        }
-
-        context_pam2.finished = 1;
-
-        packet_check_eom();
-}
-#endif
diff --git a/auth2-pam.h b/auth2-pam.h
deleted file mode 100644
index c54f811cf..000000000
--- a/auth2-pam.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* $Id: auth2-pam.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#include "includes.h"
-#ifdef USE_PAM
-
-int     auth2_pam(Authctxt *authctxt);
-
-#endif /* USE_PAM */
diff --git a/autom4te-2.53.cache/output.0 b/autom4te-2.53.cache/output.0
deleted file mode 100644
index 74f5afd76..000000000
--- a/autom4te-2.53.cache/output.0
+++ /dev/null
@@ -1,18359 +0,0 @@
-@%:@! /bin/sh
-@%:@ Guess values for system-dependent variables and create Makefiles.
-@%:@ Generated by GNU Autoconf 2.53.
-@%:@ 
-@%:@ Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
-@%:@ Free Software Foundation, Inc.
-@%:@ This configure script is free software; the Free Software Foundation
-@%:@ gives unlimited permission to copy, distribute and modify it.
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-
-# NLS nuisances.
-# Support unset when possible.
-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
-    { $as_unset LANG || test "${LANG+set}" != set; } ||
-      { LANG=C; export LANG; }
-(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
-    { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
-      { LC_ALL=C; export LC_ALL; }
-(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
-    { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
-      { LC_TIME=C; export LC_TIME; }
-(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
-    { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
-      { LC_CTYPE=C; export LC_CTYPE; }
-(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
-    { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
-      { LANGUAGE=C; export LANGUAGE; }
-(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
-    { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
-      { LC_COLLATE=C; export LC_COLLATE; }
-(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
-    { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
-      { LC_NUMERIC=C; export LC_NUMERIC; }
-(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
-    { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
-      { LC_MESSAGES=C; export LC_MESSAGES; }
-
-
-# Name of the executable.
-as_me=`(basename "$0") 2>/dev/null ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-         X"$0" : 'X\(//\)$' \| \
-         X"$0" : 'X\(/\)$' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-          /^X\/\(\/\/\)$/{ s//\1/; q; }
-          /^X\/\(\/\).*/{ s//\1/; q; }
-          s/.*/./; q'`
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conftest.sh
-  echo  "exit 0"   >>conftest.sh
-  chmod +x conftest.sh
-  if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conftest.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-         case $as_dir in
-         /*)
-           if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-             CONFIG_SHELL=$as_dir/$as_base
-             export CONFIG_SHELL
-             exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-           fi;;
-         esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='      ' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS="   $as_nl"
-
-# CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
-
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-exec 6>&1
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete.  It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-
-ac_unique_file="ssh.c"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#if HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#if HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#if STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# if HAVE_STDLIB_H
-#  include <stdlib.h>
-# endif
-#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
-#  include <memory.h>
-# endif
-# include <string.h>
-#endif
-#if HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#if HAVE_INTTYPES_H
-# include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-#  include <stdint.h>
-# endif
-#endif
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-ac_prev=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_option in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval "enable_$ac_feature=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_$ac_feature='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_$ac_package='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval "with_$ac_package=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; }
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-   { (exit 1); exit 1; }; }
-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-    eval "$ac_envvar='$ac_optarg'"
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
-   { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-              localstatedir libdir includedir oldincludedir infodir mandir
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used." >&2
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$0" : 'X\(//\)[^/]' \| \
-         X"$0" : 'X\(//\)$' \| \
-         X"$0" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-          /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-          /^X\(\/\/\)$/{ s//\1/; q; }
-          /^X\(\/\).*/{ s//\1/; q; }
-          s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-   { (exit 1); exit 1; }; }
-  else
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-  fi
-fi
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-_ACEOF
-
-  cat <<_ACEOF
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --infodir=DIR          info documentation [PREFIX/info]
-  --mandir=DIR           man documentation [PREFIX/man]
-_ACEOF
-
-  cat <<\_ACEOF
-
-System types:
-  --build=BUILD     configure for building on BUILD [guessed]
-  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-
-  cat <<\_ACEOF
-
-Optional Features:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --disable-largefile     omit support for large files
-  --disable-strip         Disable calling strip(1) on install
-  --disable-lastlog       disable use of lastlog even if detected no
-  --disable-utmp          disable use of utmp even if detected no
-  --disable-utmpx         disable use of utmpx even if detected no
-  --disable-wtmp          disable use of wtmp even if detected no
-  --disable-wtmpx         disable use of wtmpx even if detected no
-  --disable-libutil       disable use of libutil (login() etc.) no
-  --disable-pututline     disable use of pututline() etc. (uwtmp) no
-  --disable-pututxline    disable use of pututxline() etc. (uwtmpx) no
-
-Optional Packages:
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-osfsia           Enable Digital Unix SIA
-  --with-cflags           Specify additional flags to pass to compiler
-  --with-cppflags         Specify additional flags to pass to preprocessor 
-  --with-ldflags          Specify additional flags to pass to linker
-  --with-libs             Specify additional libraries to link with
-  --without-rpath         Disable auto-added -R linker paths
-  --with-zlib=PATH        Use zlib in PATH
-  --with-skey[=PATH]      Enable S/Key support
-                            (optionally in PATH)
-  --with-tcp-wrappers[=PATH]      Enable tcpwrappers support
-                            (optionally in PATH)
-  --with-pam              Enable PAM support 
-  --with-ssl-dir=PATH     Specify path to OpenSSL installation 
-  --with-rand-helper      Use subprocess to gather strong randomness 
-  --with-prngd-port=PORT  read entropy from PRNGD/EGD TCP localhost:PORT
-  --with-prngd-socket=FILE read entropy from PRNGD/EGD socket FILE (default=/var/run/egd-pool)
-  --with-entropy-timeout  Specify entropy gathering command timeout (msec)
-  --with-privsep-user=user Specify non-privileged user for privilege separation
-  --with-sectok           Enable smartcard support using libsectok
-  --with-opensc=PFX       Enable smartcard support using OpenSC
-  --with-kerberos5=PATH   Enable Kerberos 5 support
-  --with-kerberos4=PATH   Enable Kerberos 4 support
-  --with-afs=PATH         Enable AFS support
-  --with-privsep-path=xxx Path for privilege separation chroot (default=/var/empty)
-  --with-xauth=PATH       Specify path to xauth program 
-  --with-mantype=man|cat|doc  Set man page type
-  --with-md5-passwords    Enable use of MD5 passwords
-  --without-shadow        Disable shadow password support
-  --with-ipaddr-display   Use ip address instead of hostname in \$DISPLAY
-  --with-default-path=    Specify default \$PATH environment for server
-  --with-superuser-path=  Specify different path for super-user
-  --with-ipv4-default     Use IPv4 by connections unless '-6' specified
-  --with-4in6             Check for and convert IPv4 in IPv6 mapped addresses
-  --with-bsd-auth         Enable BSD auth support
-  --with-pid-dir=PATH     Specify location of ssh.pid file
-  --with-lastlog=FILE|DIR specify lastlog location common locations
-
-Some influential environment variables:
-  CC          C compiler command
-  CFLAGS      C compiler flags
-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-              nonstandard directory <lib dir>
-  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
-              headers in a nonstandard directory <include dir>
-  CPP         C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-_ACEOF
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  ac_popdir=`pwd`
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d $ac_dir || continue
-    ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-# absolute.
-ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
-ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-
-    cd $ac_dir
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      echo
-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
-    elif test -f $ac_srcdir/configure; then
-      echo
-      $SHELL $ac_srcdir/configure  --help=recursive
-    elif test -f $ac_srcdir/configure.ac ||
-           test -f $ac_srcdir/configure.in; then
-      echo
-      $ac_configure --help
-    else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi
-    cd $ac_popdir
-  done
-fi
-
-test -n "$ac_init_help" && exit 0
-if $ac_init_version; then
-  cat <<\_ACEOF
-
-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
-Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit 0
-fi
-exec 5>config.log
-cat >&5 <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.53.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-{
-cat <<_ASUNAME
-@%:@@%:@ --------- @%:@@%:@
-@%:@@%:@ Platform. @%:@@%:@
-@%:@@%:@ --------- @%:@@%:@
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
-done
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-@%:@@%:@ ----------- @%:@@%:@
-@%:@@%:@ Core tests. @%:@@%:@
-@%:@@%:@ ----------- @%:@@%:@
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell meta-characters.
-ac_configure_args=
-ac_sep=
-for ac_arg
-do
-  case $ac_arg in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n ) continue ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    continue ;;
-  *" "*|*"      "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-    ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-  esac
-  case " $ac_configure_args " in
-    *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-    *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-       ac_sep=" " ;;
-  esac
-  # Get rid of the leading space.
-done
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-    cat <<\_ASBOX
-@%:@@%:@ ---------------- @%:@@%:@
-@%:@@%:@ Cache variables. @%:@@%:@
-@%:@@%:@ ---------------- @%:@@%:@
-_ASBOX
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-{
-  (set) 2>&1 |
-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      sed -n \
-        "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-          s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-      ;;
-    *)
-      sed -n \
-        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-      ;;
-    esac;
-}
-    echo
-    if test -s confdefs.h; then
-      cat <<\_ASBOX
-@%:@@%:@ ----------- @%:@@%:@
-@%:@@%:@ confdefs.h. @%:@@%:@
-@%:@@%:@ ----------- @%:@@%:@
-_ASBOX
-      echo
-      sed "/^$/d" confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core core.* *.core &&
-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-     ' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-@%:@define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-@%:@define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-@%:@define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special
-  # files actually), so we avoid doing that.
-  if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
-    esac
-  fi
-else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
-               sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-  eval ac_new_val="\$ac_env_${ac_var}_value"
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
-        { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-        { echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-        { echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-        ac_cache_corrupted=:
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *" "*|*"    "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-ac_config_headers="$ac_config_headers config.h"
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $@%:@ != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$as_dir/$ac_word" ${1+"$@"}
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$ac_ct_CC" && break
-done
-
-  CC=$ac_ct_CC
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output" >&5
-echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-  (eval $ac_link_default) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Find the output, starting from the most likely.  This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null;
-                ls a.out conftest 2>/dev/null;
-                ls a.* conftest.* 2>/dev/null`; do
-  case $ac_file in
-    *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;;
-    a.out ) # We found the default executable, but exeext='' is most
-            # certainly right.
-            break;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-          # FIXME: I believe we export ac_cv_exeext for Libtool --akim.
-          export ac_cv_exeext
-          break;;
-    * ) break;;
-  esac
-done
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5
-echo "$as_me: error: C compiler cannot create executables" >&2;}
-   { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
-
-# Check the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
-  if { ac_try='./$ac_file'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
-        cross_compiling=yes
-    else
-        { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'." >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-  fi
-fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-rm -f a.out a.exe conftest$ac_cv_exeext
-ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
-  case $ac_file in
-    *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-          export ac_cv_exeext
-          break;;
-    * ) break;;
-  esac
-done
-else
-  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-if test "${ac_cv_objext+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;;
-    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-       break;;
-  esac
-done
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_compiler_gnu=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_compiler_gnu=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_prog_cc_g=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-# Some people use a C++ compiler to compile C.  Since we use `exit',
-# in C++ we need to declare it.  In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-@%:@ifndef __cplusplus
-  choke me
-@%:@endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  for ac_declaration in \
-   ''\
-   '#include <stdlib.h>' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
-do
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@include <stdlib.h>
-$ac_declaration
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-continue
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_declaration
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
-fi
-
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f $ac_dir/shtool; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-# Make sure we can run config.sub.
-$ac_config_sub sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
-   { (exit 1); exit 1; }; }
-
-echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6
-if test "${ac_cv_build+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_build_alias=$build_alias
-test -z "$ac_cv_build_alias" &&
-  ac_cv_build_alias=`$ac_config_guess`
-test -z "$ac_cv_build_alias" &&
-  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-   { (exit 1); exit 1; }; }
-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6
-build=$ac_cv_build
-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6
-if test "${ac_cv_host+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_host_alias=$host_alias
-test -z "$ac_cv_host_alias" &&
-  ac_cv_host_alias=$ac_cv_build_alias
-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6
-host=$ac_cv_host
-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-
-echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
-echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6
-if test "${ac_cv_c_bigendian+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # See if sys/param.h defines the BYTE_ORDER macro.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/param.h>
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
- bogus endian macros
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  # It does; now see whether it defined to BIG_ENDIAN or not.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/param.h>
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-#if BYTE_ORDER != BIG_ENDIAN
- not big endian
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_c_bigendian=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_c_bigendian=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-# It does not; compile a test program.
-if test "$cross_compiling" = yes; then
-  # try to guess the endianess by grep'ing values into an object file
-  ac_cv_c_bigendian=unknown
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
-short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
-void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; }
-short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
-short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
-void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; }
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- _ascii (); _ebcdic (); 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  if fgrep BIGenDianSyS conftest.$ac_objext >/dev/null ; then
-  ac_cv_c_bigendian=yes
-fi
-if fgrep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
-  if test "$ac_cv_c_bigendian" = unknown; then
-    ac_cv_c_bigendian=no
-  else
-    # finding both strings is unlikely to happen, but who knows?
-    ac_cv_c_bigendian=unknown
-  fi
-fi
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-int
-main ()
-{
-  /* Are we little or big endian?  From Harbison&Steele.  */
-  union
-  {
-    long l;
-    char c[sizeof (long)];
-  } u;
-  u.l = 1;
-  exit (u.c[sizeof (long) - 1] == 1);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_c_bigendian=no
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-ac_cv_c_bigendian=yes
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
-echo "${ECHO_T}$ac_cv_c_bigendian" >&6
-case $ac_cv_c_bigendian in
-  yes)
-    
-cat >>confdefs.h <<\_ACEOF
-@%:@define WORDS_BIGENDIAN 1
-_ACEOF
- ;;
-  no)
-     ;;
-  *)
-    { { echo "$as_me:$LINENO: error: unknown endianess
-presetting ac_cv_c_bigendian=no (or yes) will help" >&5
-echo "$as_me: error: unknown endianess
-presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-
-
-# Checks for programs.
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-      # Double quotes because CPP needs to be expanded
-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@include <assert.h>
-                     Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether non-existent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  break
-fi
-
-    done
-    ac_cv_prog_CPP=$CPP
-  
-fi
-  CPP=$ac_cv_prog_CPP
-else
-  ac_cv_prog_CPP=$CPP
-fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@include <assert.h>
-                     Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether non-existent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
-else
-  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  RANLIB=$ac_ct_RANLIB
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-        if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-          if test $ac_prog = install &&
-            grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-            # AIX install.  It has an incompatible calling convention.
-            :
-          elif test $ac_prog = install &&
-            grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-            # program-specific install script used by HP pwplus--don't use.
-            :
-          else
-            ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-            break 3
-          fi
-        fi
-      done
-    done
-    ;;
-esac
-done
-
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL=$ac_install_sh
-  fi
-fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-# Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_AR+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $AR in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_AR="$AR" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_AR="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-AR=$ac_cv_path_AR
-
-if test -n "$AR"; then
-  echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-for ac_prog in perl5 perl
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PERL+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PERL in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PERL=$ac_cv_path_PERL
-
-if test -n "$PERL"; then
-  echo "$as_me:$LINENO: result: $PERL" >&5
-echo "${ECHO_T}$PERL" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$PERL" && break
-done
-
-# Extract the first word of "sed", so it can be a program name with args.
-set dummy sed; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_SED+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $SED in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_SED="$SED" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_SED="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-SED=$ac_cv_path_SED
-
-if test -n "$SED"; then
-  echo "$as_me:$LINENO: result: $SED" >&5
-echo "${ECHO_T}$SED" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-# Extract the first word of "ent", so it can be a program name with args.
-set dummy ent; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_ENT+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $ENT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_ENT="$ENT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_ENT="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-ENT=$ac_cv_path_ENT
-
-if test -n "$ENT"; then
-  echo "$as_me:$LINENO: result: $ENT" >&5
-echo "${ECHO_T}$ENT" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-# Extract the first word of "bash", so it can be a program name with args.
-set dummy bash; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_TEST_MINUS_S_SH+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $TEST_MINUS_S_SH in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_TEST_MINUS_S_SH="$TEST_MINUS_S_SH" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_TEST_MINUS_S_SH="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-TEST_MINUS_S_SH=$ac_cv_path_TEST_MINUS_S_SH
-
-if test -n "$TEST_MINUS_S_SH"; then
-  echo "$as_me:$LINENO: result: $TEST_MINUS_S_SH" >&5
-echo "${ECHO_T}$TEST_MINUS_S_SH" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-# Extract the first word of "ksh", so it can be a program name with args.
-set dummy ksh; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_TEST_MINUS_S_SH+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $TEST_MINUS_S_SH in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_TEST_MINUS_S_SH="$TEST_MINUS_S_SH" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_TEST_MINUS_S_SH="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-TEST_MINUS_S_SH=$ac_cv_path_TEST_MINUS_S_SH
-
-if test -n "$TEST_MINUS_S_SH"; then
-  echo "$as_me:$LINENO: result: $TEST_MINUS_S_SH" >&5
-echo "${ECHO_T}$TEST_MINUS_S_SH" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-# Extract the first word of "sh", so it can be a program name with args.
-set dummy sh; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_TEST_MINUS_S_SH+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $TEST_MINUS_S_SH in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_TEST_MINUS_S_SH="$TEST_MINUS_S_SH" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_TEST_MINUS_S_SH="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-TEST_MINUS_S_SH=$ac_cv_path_TEST_MINUS_S_SH
-
-if test -n "$TEST_MINUS_S_SH"; then
-  echo "$as_me:$LINENO: result: $TEST_MINUS_S_SH" >&5
-echo "${ECHO_T}$TEST_MINUS_S_SH" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-# Extract the first word of "sh", so it can be a program name with args.
-set dummy sh; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_SH+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $SH in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_SH="$SH" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_SH="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-SH=$ac_cv_path_SH
-
-if test -n "$SH"; then
-  echo "$as_me:$LINENO: result: $SH" >&5
-echo "${ECHO_T}$SH" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-# System features
-# Check whether --enable-largefile or --disable-largefile was given.
-if test "${enable_largefile+set}" = set; then
-  enableval="$enable_largefile"
-  
-fi; 
-if test "$enable_largefile" != no; then
-
-  echo "$as_me:$LINENO: checking for special C compiler options needed for large files" >&5
-echo $ECHO_N "checking for special C compiler options needed for large files... $ECHO_C" >&6
-if test "${ac_cv_sys_largefile_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_sys_largefile_CC=no
-     if test "$GCC" != yes; then
-       ac_save_CC=$CC
-       while :; do
-         # IRIX 6.2 and later do not support large files by default,
-         # so use the C compiler's -n32 option if that helps.
-         cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
-    We can't simply define LARGE_OFF_T to be 9223372036854775807,
-    since some C++ compilers masquerading as C compilers
-    incorrectly reject 9223372036854775807.  */
-@%:@define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-                       && LARGE_OFF_T % 2147483647 == 1)
-                      ? 1 : -1];
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-         rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext 
-         CC="$CC -n32"
-         rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sys_largefile_CC=' -n32'; break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext 
-         break
-       done
-       CC=$ac_save_CC
-       rm -f conftest.$ac_ext
-    fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_CC" >&5
-echo "${ECHO_T}$ac_cv_sys_largefile_CC" >&6
-  if test "$ac_cv_sys_largefile_CC" != no; then
-    CC=$CC$ac_cv_sys_largefile_CC
-  fi
-
-  echo "$as_me:$LINENO: checking for _FILE_OFFSET_BITS value needed for large files" >&5
-echo $ECHO_N "checking for _FILE_OFFSET_BITS value needed for large files... $ECHO_C" >&6
-if test "${ac_cv_sys_file_offset_bits+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  while :; do
-  ac_cv_sys_file_offset_bits=no
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
-    We can't simply define LARGE_OFF_T to be 9223372036854775807,
-    since some C++ compilers masquerading as C compilers
-    incorrectly reject 9223372036854775807.  */
-@%:@define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-                       && LARGE_OFF_T % 2147483647 == 1)
-                      ? 1 : -1];
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@define _FILE_OFFSET_BITS 64
-@%:@include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
-    We can't simply define LARGE_OFF_T to be 9223372036854775807,
-    since some C++ compilers masquerading as C compilers
-    incorrectly reject 9223372036854775807.  */
-@%:@define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-                       && LARGE_OFF_T % 2147483647 == 1)
-                      ? 1 : -1];
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sys_file_offset_bits=64; break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  break
-done
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sys_file_offset_bits" >&5
-echo "${ECHO_T}$ac_cv_sys_file_offset_bits" >&6
-if test "$ac_cv_sys_file_offset_bits" != no; then
-  
-cat >>confdefs.h <<_ACEOF
-@%:@define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
-_ACEOF
-
-fi
-rm -f conftest*
-  echo "$as_me:$LINENO: checking for _LARGE_FILES value needed for large files" >&5
-echo $ECHO_N "checking for _LARGE_FILES value needed for large files... $ECHO_C" >&6
-if test "${ac_cv_sys_large_files+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  while :; do
-  ac_cv_sys_large_files=no
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
-    We can't simply define LARGE_OFF_T to be 9223372036854775807,
-    since some C++ compilers masquerading as C compilers
-    incorrectly reject 9223372036854775807.  */
-@%:@define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-                       && LARGE_OFF_T % 2147483647 == 1)
-                      ? 1 : -1];
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@define _LARGE_FILES 1
-@%:@include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
-    We can't simply define LARGE_OFF_T to be 9223372036854775807,
-    since some C++ compilers masquerading as C compilers
-    incorrectly reject 9223372036854775807.  */
-@%:@define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-                       && LARGE_OFF_T % 2147483647 == 1)
-                      ? 1 : -1];
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sys_large_files=1; break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  break
-done
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sys_large_files" >&5
-echo "${ECHO_T}$ac_cv_sys_large_files" >&6
-if test "$ac_cv_sys_large_files" != no; then
-  
-cat >>confdefs.h <<_ACEOF
-@%:@define _LARGE_FILES $ac_cv_sys_large_files
-_ACEOF
-
-fi
-rm -f conftest*
-fi
-
-
-if test -z "$AR" ; then
-        { { echo "$as_me:$LINENO: error: *** 'ar' missing, please install or fix your \$PATH ***" >&5
-echo "$as_me: error: *** 'ar' missing, please install or fix your \$PATH ***" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-# Use LOGIN_PROGRAM from environment if possible
-if test ! -z "$LOGIN_PROGRAM" ; then
-        cat >>confdefs.h <<_ACEOF
-@%:@define LOGIN_PROGRAM_FALLBACK "$LOGIN_PROGRAM"
-_ACEOF
-
-else
-        # Search for login
-        # Extract the first word of "login", so it can be a program name with args.
-set dummy login; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_LOGIN_PROGRAM_FALLBACK+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $LOGIN_PROGRAM_FALLBACK in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_LOGIN_PROGRAM_FALLBACK="$LOGIN_PROGRAM_FALLBACK" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_LOGIN_PROGRAM_FALLBACK="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-LOGIN_PROGRAM_FALLBACK=$ac_cv_path_LOGIN_PROGRAM_FALLBACK
-
-if test -n "$LOGIN_PROGRAM_FALLBACK"; then
-  echo "$as_me:$LINENO: result: $LOGIN_PROGRAM_FALLBACK" >&5
-echo "${ECHO_T}$LOGIN_PROGRAM_FALLBACK" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test ! -z "$LOGIN_PROGRAM_FALLBACK" ; then
-                cat >>confdefs.h <<_ACEOF
-@%:@define LOGIN_PROGRAM_FALLBACK "$LOGIN_PROGRAM_FALLBACK"
-_ACEOF
-
-        fi
-fi
-
-if test -z "$LD" ; then
-        LD=$CC
-fi
-
-        
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_prog_cc_stdc=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX                   -qlanglvl=ansi
-# Ultrix and OSF/1      -std1
-# HP-UX 10.20 and later -Ae
-# HP-UX older versions  -Aa -D_HPUX_SOURCE
-# SVR4                  -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_stdc=$ac_arg
-break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext 
-done
-rm -f conftest.$ac_ext conftest.$ac_objext
-CC=$ac_save_CC
-
-fi
-
-case "x$ac_cv_prog_cc_stdc" in
-  x|xno)
-    echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
-  *)
-    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-    CC="$CC $ac_cv_prog_cc_stdc" ;;
-esac
-
-echo "$as_me:$LINENO: checking for inline" >&5
-echo $ECHO_N "checking for inline... $ECHO_C" >&6
-if test "${ac_cv_c_inline+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_c_inline=no
-for ac_kw in inline __inline__ __inline; do
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#ifndef __cplusplus
-static $ac_kw int static_foo () {return 0; }
-$ac_kw int foo () {return 0; }
-#endif
-
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_c_inline=$ac_kw; break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
-echo "${ECHO_T}$ac_cv_c_inline" >&6
-case $ac_cv_c_inline in
-  inline | yes) ;;
-  no) 
-cat >>confdefs.h <<\_ACEOF
-@%:@define inline 
-_ACEOF
- ;;
-  *)  cat >>confdefs.h <<_ACEOF
-@%:@define inline $ac_cv_c_inline
-_ACEOF
- ;;
-esac
-
-if test "$GCC" = "yes" || test "$GCC" = "egcs"; then 
-        CFLAGS="$CFLAGS -Wall -Wpointer-arith -Wno-uninitialized"
-fi
-
-# Check for some target-specific stuff
-case "$host" in
-*-*-aix*)
-        AFS_LIBS="-lld"
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        if (test "$LD" != "gcc" && test -z "$blibpath"); then
-                echo "$as_me:$LINENO: checking if linkage editor ($LD) accepts -blibpath" >&5
-echo $ECHO_N "checking if linkage editor ($LD) accepts -blibpath... $ECHO_C" >&6
-                saved_LDFLAGS="$LDFLAGS"
-                LDFLAGS="$LDFLAGS -blibpath:/usr/lib:/lib:/usr/local/lib"
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                                blibpath="/usr/lib:/lib:/usr/local/lib"
-                        
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6 
-                
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-                LDFLAGS="$saved_LDFLAGS"
-        fi
-        echo "$as_me:$LINENO: checking for authenticate" >&5
-echo $ECHO_N "checking for authenticate... $ECHO_C" >&6
-if test "${ac_cv_func_authenticate+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char authenticate (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char authenticate ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_authenticate) || defined (__stub___authenticate)
-choke me
-#else
-f = authenticate;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_authenticate=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_authenticate=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_authenticate" >&5
-echo "${ECHO_T}$ac_cv_func_authenticate" >&6
-if test $ac_cv_func_authenticate = yes; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_AIXAUTHENTICATE 1
-_ACEOF
-
-else
-  echo "$as_me:$LINENO: checking for authenticate in -ls" >&5
-echo $ECHO_N "checking for authenticate in -ls... $ECHO_C" >&6
-if test "${ac_cv_lib_s_authenticate+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ls  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char authenticate ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-authenticate ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_s_authenticate=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_s_authenticate=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_s_authenticate" >&5
-echo "${ECHO_T}$ac_cv_lib_s_authenticate" >&6
-if test $ac_cv_lib_s_authenticate = yes; then
-   cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_AIXAUTHENTICATE 1
-_ACEOF
-
-                                LIBS="$LIBS -ls"
-                        
-fi
-
-                
-fi
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_GETADDRINFO 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_REALPATH 1
-_ACEOF
-
-                cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_LASTLOG 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NEEDS_UTMPX 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETPROCTITLE_STRATEGY PS_USE_CLOBBER_ARGV
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETPROCTITLE_PS_PADDING '\0'
-_ACEOF
-
-        ;;
-*-*-cygwin*)
-        check_for_libcrypt_later=1
-        LIBS="$LIBS /usr/lib/textmode.o"
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_CYGWIN 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_SHADOW 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define IPV4_DEFAULT 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define IP_TOS_IS_BROKEN 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define NO_X11_UNIX_SOCKETS 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define NO_IPPORT_RESERVED_CONCEPT 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_FD_PASSING 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETGROUPS_NOOP 1
-_ACEOF
-
-        ;;
-*-*-dgux*)
-        cat >>confdefs.h <<\_ACEOF
-@%:@define IP_TOS_IS_BROKEN 1
-_ACEOF
-
-        ;;
-*-*-darwin*)
-        echo "$as_me:$LINENO: checking if we have working getaddrinfo" >&5
-echo $ECHO_N "checking if we have working getaddrinfo... $ECHO_C" >&6
-        if test "$cross_compiling" = yes; then
-  echo "$as_me:$LINENO: result: assume it is working" >&5
-echo "${ECHO_T}assume it is working" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <mach-o/dyld.h>
-main() { if (NSVersionOfRunTimeLibrary("System") >= (60 << 16))
-                exit(0);
-        else
-                exit(1);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  echo "$as_me:$LINENO: result: working" >&5
-echo "${ECHO_T}working" >&6
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-echo "$as_me:$LINENO: result: buggy" >&5
-echo "${ECHO_T}buggy" >&6
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_GETADDRINFO 1
-_ACEOF
-
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-        ;;
-*-*-hpux10.26)
-        if test -z "$GCC"; then
-                CFLAGS="$CFLAGS -Ae"
-        fi
-        CPPFLAGS="$CPPFLAGS -D_HPUX_SOURCE -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1"
-        IPADDR_IN_DISPLAY=yes
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SECUREWARE 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NO_ENDOPT 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NEEDS_UTMPX 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_SHADOW 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMP 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETPROCTITLE_STRATEGY PS_USE_PSTAT
-_ACEOF
-
-        LIBS="$LIBS -lsec -lsecpw"
-        
-echo "$as_me:$LINENO: checking for t_error in -lxnet" >&5
-echo $ECHO_N "checking for t_error in -lxnet... $ECHO_C" >&6
-if test "${ac_cv_lib_xnet_t_error+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lxnet  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char t_error ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-t_error ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_xnet_t_error=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_xnet_t_error=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_xnet_t_error" >&5
-echo "${ECHO_T}$ac_cv_lib_xnet_t_error" >&6
-if test $ac_cv_lib_xnet_t_error = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBXNET 1
-_ACEOF
-
-  LIBS="-lxnet $LIBS"
-
-else
-  { { echo "$as_me:$LINENO: error: *** -lxnet needed on HP-UX - check config.log ***" >&5
-echo "$as_me: error: *** -lxnet needed on HP-UX - check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-        disable_ptmx_check=yes
-        ;;
-*-*-hpux10*)
-        if test -z "$GCC"; then
-                CFLAGS="$CFLAGS -Ae"
-        fi
-        CPPFLAGS="$CPPFLAGS -D_HPUX_SOURCE -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1"
-        IPADDR_IN_DISPLAY=yes
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NO_ENDOPT 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NEEDS_UTMPX 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_SHADOW 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMP 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETPROCTITLE_STRATEGY PS_USE_PSTAT
-_ACEOF
-
-        LIBS="$LIBS -lsec"
-        
-echo "$as_me:$LINENO: checking for t_error in -lxnet" >&5
-echo $ECHO_N "checking for t_error in -lxnet... $ECHO_C" >&6
-if test "${ac_cv_lib_xnet_t_error+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lxnet  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char t_error ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-t_error ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_xnet_t_error=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_xnet_t_error=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_xnet_t_error" >&5
-echo "${ECHO_T}$ac_cv_lib_xnet_t_error" >&6
-if test $ac_cv_lib_xnet_t_error = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBXNET 1
-_ACEOF
-
-  LIBS="-lxnet $LIBS"
-
-else
-  { { echo "$as_me:$LINENO: error: *** -lxnet needed on HP-UX - check config.log ***" >&5
-echo "$as_me: error: *** -lxnet needed on HP-UX - check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-        ;;
-*-*-hpux11*)
-        CPPFLAGS="$CPPFLAGS -D_HPUX_SOURCE -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1"
-        IPADDR_IN_DISPLAY=yes
-        cat >>confdefs.h <<\_ACEOF
-@%:@define PAM_SUN_CODEBASE 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NO_ENDOPT 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NEEDS_UTMPX 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_SHADOW 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMP 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETPROCTITLE_STRATEGY PS_USE_PSTAT
-_ACEOF
-
-        LIBS="$LIBS -lsec"
-        
-echo "$as_me:$LINENO: checking for t_error in -lxnet" >&5
-echo $ECHO_N "checking for t_error in -lxnet... $ECHO_C" >&6
-if test "${ac_cv_lib_xnet_t_error+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lxnet  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char t_error ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-t_error ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_xnet_t_error=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_xnet_t_error=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_xnet_t_error" >&5
-echo "${ECHO_T}$ac_cv_lib_xnet_t_error" >&6
-if test $ac_cv_lib_xnet_t_error = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBXNET 1
-_ACEOF
-
-  LIBS="-lxnet $LIBS"
-
-else
-  { { echo "$as_me:$LINENO: error: *** -lxnet needed on HP-UX - check config.log ***" >&5
-echo "$as_me: error: *** -lxnet needed on HP-UX - check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-        ;;
-*-*-irix5*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS"
-        PATH="$PATH:/usr/etc"
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_INET_NTOA 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_ABBREV_NO_TTY 1
-_ACEOF
-
-        ;;
-*-*-irix6*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS"
-        PATH="$PATH:/usr/etc"
-        cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_IRIX_ARRAY 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_IRIX_PROJECT 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_IRIX_AUDIT 1
-_ACEOF
-
-        echo "$as_me:$LINENO: checking for jlimit_startjob" >&5
-echo $ECHO_N "checking for jlimit_startjob... $ECHO_C" >&6
-if test "${ac_cv_func_jlimit_startjob+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char jlimit_startjob (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char jlimit_startjob ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_jlimit_startjob) || defined (__stub___jlimit_startjob)
-choke me
-#else
-f = jlimit_startjob;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_jlimit_startjob=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_jlimit_startjob=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_jlimit_startjob" >&5
-echo "${ECHO_T}$ac_cv_func_jlimit_startjob" >&6
-if test $ac_cv_func_jlimit_startjob = yes; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_IRIX_JOBS 1
-_ACEOF
-
-fi
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_INET_NTOA 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_ABBREV_NO_TTY 1
-_ACEOF
-
-        ;;
-*-*-linux*)
-        no_dev_ptmx=1
-        check_for_libcrypt_later=1
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DONT_TRY_OTHER_AF 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define PAM_TTY_KLUDGE 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETPROCTITLE_STRATEGY PS_USE_CLOBBER_ARGV
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETPROCTITLE_PS_PADDING '\0'
-_ACEOF
-
-        inet6_default_4in6=yes
-        ;;
-mips-sony-bsd|mips-sony-newsos4)
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_NEWS4 1
-_ACEOF
-
-        SONY=1
-        ;;
-*-*-netbsd*)
-        check_for_libcrypt_before=1
-        need_dash_r=1
-        ;;
-*-*-freebsd*)
-        check_for_libcrypt_later=1
-        ;;
-*-next-*)
-        conf_lastlog_location="/usr/adm/lastlog"
-        conf_utmp_location=/etc/utmp
-        conf_wtmp_location=/usr/adm/wtmp
-        MAIL=/usr/spool/mail
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_NEXT 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_REALPATH 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_SAVED_UIDS 1
-_ACEOF
-
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        CFLAGS="$CFLAGS"
-        ;;
-*-*-solaris*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib -R/usr/local/lib" 
-        need_dash_r=1
-        cat >>confdefs.h <<\_ACEOF
-@%:@define PAM_SUN_CODEBASE 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NEEDS_UTMPX 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NEEDS_TERM 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define PAM_TTY_KLUDGE 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define STREAMS_PUSH_ACQUIRES_CTTY 1
-_ACEOF
-
-        # hardwire lastlog location (can't detect it on some versions)
-        conf_lastlog_location="/var/adm/lastlog"
-        echo "$as_me:$LINENO: checking for obsolete utmp and wtmp in solaris2.x" >&5
-echo $ECHO_N "checking for obsolete utmp and wtmp in solaris2.x... $ECHO_C" >&6
-        sol2ver=`echo "$host"| sed -e 's/.*[0-9]\.//'`
-        if test "$sol2ver" -ge 8; then
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMP 1
-_ACEOF
-
-                cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_WTMP 1
-_ACEOF
-
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-        ;;
-*-*-sunos4*)
-        CPPFLAGS="$CPPFLAGS -DSUNOS4"
-        
-for ac_func in getpwanam
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-f = $ac_func;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define PAM_SUN_CODEBASE 1
-_ACEOF
-
-        conf_utmp_location=/etc/utmp
-        conf_wtmp_location=/var/adm/wtmp
-        conf_lastlog_location=/var/adm/lastlog
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        ;;
-*-ncr-sysv*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        LIBS="$LIBS -lc89"
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        ;;
-*-sni-sysv*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        # /usr/ucblib MUST NOT be searched on ReliantUNIX
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        IPADDR_IN_DISPLAY=yes
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define IP_TOS_IS_BROKEN 1
-_ACEOF
-
-        # /usr/ucblib/libucb.a no longer needed on ReliantUNIX
-        # Attention: always take care to bind libsocket and libnsl before libc,
-        # otherwise you will find lots of "SIOCGPGRP errno 22" on syslog
-        ;;
-*-*-sysv4.2*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        ;;
-*-*-sysv5*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        ;;
-*-*-sysv*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        ;;
-*-*-sco3.2v4*)
-        CPPFLAGS="$CPPFLAGS -Dftruncate=chsize -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        LIBS="$LIBS -los -lprot -lx -ltinfo -lm"
-        RANLIB=true
-        no_dev_ptmx=1
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_SYS_TERMIO_H 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SECUREWARE 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_SHADOW 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_SAVED_UIDS 1
-_ACEOF
-
-        
-
-for ac_func in getluid setluid
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-f = $ac_func;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-        MANTYPE=man
-        do_sco3_extra_lib_check=yes
-        ;;
-*-*-sco3.2v5*)
-        if test -z "$GCC"; then
-                CFLAGS="$CFLAGS -belf"
-        fi
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        LIBS="$LIBS -lprot -lx -ltinfo -lm"
-        no_dev_ptmx=1
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SECUREWARE 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_SHADOW 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_FD_PASSING 1
-_ACEOF
-
-        
-
-for ac_func in getluid setluid
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-f = $ac_func;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-        MANTYPE=man
-        ;;
-*-*-unicosmk*)
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_FD_PASSING 1
-_ACEOF
-
-        LDFLAGS="$LDFLAGS"
-        LIBS="$LIBS -lgen -lrsc -lshare -luex -lacm"
-        MANTYPE=cat
-        ;;
-*-*-unicos*)
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_FD_PASSING 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define NO_SSH_LASTLOG 1
-_ACEOF
-
-        LDFLAGS="$LDFLAGS -Wl,-Dmsglevel=334:fatal"
-        LIBS="$LIBS -lgen -lrsc -lshare -luex -lacm"
-        MANTYPE=cat
-        ;;
-*-dec-osf*)
-        echo "$as_me:$LINENO: checking for Digital Unix SIA" >&5
-echo $ECHO_N "checking for Digital Unix SIA... $ECHO_C" >&6
-        no_osfsia=""
-        
-# Check whether --with-osfsia or --without-osfsia was given.
-if test "${with_osfsia+set}" = set; then
-  withval="$with_osfsia"
-  
-                        if test "x$withval" = "xno" ; then
-                                echo "$as_me:$LINENO: result: disabled" >&5
-echo "${ECHO_T}disabled" >&6
-                                no_osfsia=1
-                        fi
-                
-fi; 
-        if test -z "$no_osfsia" ; then
-                if test -f /etc/sia/matrix.conf; then
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_OSF_SIA 1
-_ACEOF
-
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_LOGIN 1
-_ACEOF
-
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_FD_PASSING 1
-_ACEOF
-
-                        LIBS="$LIBS -lsecurity -ldb -lm -laud"
-                else
-                        echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                fi
-        fi
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_FD_PASSING 1
-_ACEOF
-
-        ;;
-
-*-*-nto-qnx)
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define NO_X11_UNIX_SOCKETS 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define MISSING_NFDBITS 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define MISSING_HOWMANY 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define MISSING_FD_MASK 1
-_ACEOF
-
-        ;;
-esac
-
-# Allow user to specify flags
-
-# Check whether --with-cflags or --without-cflags was given.
-if test "${with_cflags+set}" = set; then
-  withval="$with_cflags"
-  
-                if test "x$withval" != "xno" ; then
-                        CFLAGS="$CFLAGS $withval"
-                fi
-                
-
-fi; 
-
-# Check whether --with-cppflags or --without-cppflags was given.
-if test "${with_cppflags+set}" = set; then
-  withval="$with_cppflags"
-  
-                if test "x$withval" != "xno"; then
-                        CPPFLAGS="$CPPFLAGS $withval"
-                fi
-        
-
-fi; 
-
-# Check whether --with-ldflags or --without-ldflags was given.
-if test "${with_ldflags+set}" = set; then
-  withval="$with_ldflags"
-  
-                if test "x$withval" != "xno" ; then
-                        LDFLAGS="$LDFLAGS $withval"
-                fi
-                
-
-fi; 
-
-# Check whether --with-libs or --without-libs was given.
-if test "${with_libs+set}" = set; then
-  withval="$with_libs"
-  
-                if test "x$withval" != "xno" ; then
-                        LIBS="$LIBS $withval"
-                fi
-                
-
-fi; 
-
-# Checks for header files.
-
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-if test "${ac_cv_header_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_cv_header_stdc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_header_stdc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "memchr" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "free" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then
-  :
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <ctype.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \
-                     || ('j' <= (c) && (c) <= 'r') \
-                     || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
-  int i;
-  for (i = 0; i < 256; i++)
-    if (XOR (islower (i), ISLOWER (i))
-        || toupper (i) != TOUPPER (i))
-      exit(2);
-  exit (0);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
-if test $ac_cv_header_stdc = yes; then
-  
-cat >>confdefs.h <<\_ACEOF
-@%:@define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-                  inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-
-@%:@include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_Header=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_Header=no"
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-
-done
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-for ac_header in bstring.h crypt.h endian.h floatingpoint.h \
-        getopt.h glob.h ia.h lastlog.h libgen.h limits.h login.h \
-        login_cap.h maillock.h netdb.h netgroup.h \
-        netinet/in_systm.h paths.h pty.h readpassphrase.h \
-        rpc/types.h security/pam_appl.h shadow.h stddef.h stdint.h \
-        strings.h sys/bitypes.h sys/bsdtty.h sys/cdefs.h \
-        sys/mman.h sys/pstat.h sys/select.h sys/stat.h \
-        sys/stropts.h sys/sysmacros.h sys/time.h sys/timers.h \
-        sys/un.h time.h tmpdir.h ttyent.h usersec.h \
-        util.h utime.h utmp.h utmpx.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-@%:@include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-
-done
-
-
-# Checks for libraries.
-echo "$as_me:$LINENO: checking for yp_match" >&5
-echo $ECHO_N "checking for yp_match... $ECHO_C" >&6
-if test "${ac_cv_func_yp_match+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char yp_match (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char yp_match ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_yp_match) || defined (__stub___yp_match)
-choke me
-#else
-f = yp_match;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_yp_match=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_yp_match=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_yp_match" >&5
-echo "${ECHO_T}$ac_cv_func_yp_match" >&6
-if test $ac_cv_func_yp_match = yes; then
-  :
-else
-  
-echo "$as_me:$LINENO: checking for yp_match in -lnsl" >&5
-echo $ECHO_N "checking for yp_match in -lnsl... $ECHO_C" >&6
-if test "${ac_cv_lib_nsl_yp_match+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lnsl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char yp_match ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-yp_match ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_nsl_yp_match=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_nsl_yp_match=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_yp_match" >&5
-echo "${ECHO_T}$ac_cv_lib_nsl_yp_match" >&6
-if test $ac_cv_lib_nsl_yp_match = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBNSL 1
-_ACEOF
-
-  LIBS="-lnsl $LIBS"
-
-fi
-
-fi
-
-echo "$as_me:$LINENO: checking for setsockopt" >&5
-echo $ECHO_N "checking for setsockopt... $ECHO_C" >&6
-if test "${ac_cv_func_setsockopt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char setsockopt (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char setsockopt ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_setsockopt) || defined (__stub___setsockopt)
-choke me
-#else
-f = setsockopt;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_setsockopt=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_setsockopt=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_setsockopt" >&5
-echo "${ECHO_T}$ac_cv_func_setsockopt" >&6
-if test $ac_cv_func_setsockopt = yes; then
-  :
-else
-  
-echo "$as_me:$LINENO: checking for setsockopt in -lsocket" >&5
-echo $ECHO_N "checking for setsockopt in -lsocket... $ECHO_C" >&6
-if test "${ac_cv_lib_socket_setsockopt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsocket  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char setsockopt ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-setsockopt ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_socket_setsockopt=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_socket_setsockopt=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_socket_setsockopt" >&5
-echo "${ECHO_T}$ac_cv_lib_socket_setsockopt" >&6
-if test $ac_cv_lib_socket_setsockopt = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBSOCKET 1
-_ACEOF
-
-  LIBS="-lsocket $LIBS"
-
-fi
-
-fi
-
-
-if test "x$with_tcp_wrappers" != "xno" ; then
-    if test "x$do_sco3_extra_lib_check" = "xyes" ; then
-        echo "$as_me:$LINENO: checking for innetgr in -lrpc" >&5
-echo $ECHO_N "checking for innetgr in -lrpc... $ECHO_C" >&6
-if test "${ac_cv_lib_rpc_innetgr+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lrpc -lyp -lrpc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char innetgr ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-innetgr ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_rpc_innetgr=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_rpc_innetgr=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_rpc_innetgr" >&5
-echo "${ECHO_T}$ac_cv_lib_rpc_innetgr" >&6
-if test $ac_cv_lib_rpc_innetgr = yes; then
-  LIBS="-lrpc -lyp -lrpc $LIBS" 
-fi
-
-    fi
-fi
-
-echo "$as_me:$LINENO: checking for getspnam" >&5
-echo $ECHO_N "checking for getspnam... $ECHO_C" >&6
-if test "${ac_cv_func_getspnam+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char getspnam (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char getspnam ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_getspnam) || defined (__stub___getspnam)
-choke me
-#else
-f = getspnam;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_getspnam=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_getspnam=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_getspnam" >&5
-echo "${ECHO_T}$ac_cv_func_getspnam" >&6
-if test $ac_cv_func_getspnam = yes; then
-  :
-else
-  echo "$as_me:$LINENO: checking for getspnam in -lgen" >&5
-echo $ECHO_N "checking for getspnam in -lgen... $ECHO_C" >&6
-if test "${ac_cv_lib_gen_getspnam+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgen  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char getspnam ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-getspnam ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_gen_getspnam=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_gen_getspnam=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_gen_getspnam" >&5
-echo "${ECHO_T}$ac_cv_lib_gen_getspnam" >&6
-if test $ac_cv_lib_gen_getspnam = yes; then
-  LIBS="$LIBS -lgen"
-fi
-
-fi
-
-
-
-# Check whether --with-rpath or --without-rpath was given.
-if test "${with_rpath+set}" = set; then
-  withval="$with_rpath"
-  
-                if test "x$withval" = "xno" ; then      
-                        need_dash_r=""
-                fi
-                if test "x$withval" = "xyes" ; then
-                        need_dash_r=1
-                fi
-        
-
-fi; 
-
-
-# Check whether --with-zlib or --without-zlib was given.
-if test "${with_zlib+set}" = set; then
-  withval="$with_zlib"
-  
-                if test "x$withval" = "xno" ; then
-                        { { echo "$as_me:$LINENO: error: *** zlib is required ***" >&5
-echo "$as_me: error: *** zlib is required ***" >&2;}
-   { (exit 1); exit 1; }; }
-                fi
-                if test -d "$withval/lib"; then
-                        if test -n "${need_dash_r}"; then
-                                LDFLAGS="-L${withval}/lib -R${withval}/lib ${LDFLAGS}"
-                        else
-                                LDFLAGS="-L${withval}/lib ${LDFLAGS}"
-                        fi
-                else
-                        if test -n "${need_dash_r}"; then
-                                LDFLAGS="-L${withval} -R${withval} ${LDFLAGS}"
-                        else
-                                LDFLAGS="-L${withval} ${LDFLAGS}"
-                        fi
-                fi
-                if test -d "$withval/include"; then
-                        CPPFLAGS="-I${withval}/include ${CPPFLAGS}"
-                else
-                        CPPFLAGS="-I${withval} ${CPPFLAGS}"
-                fi
-        
-
-fi; 
-
-
-echo "$as_me:$LINENO: checking for deflate in -lz" >&5
-echo $ECHO_N "checking for deflate in -lz... $ECHO_C" >&6
-if test "${ac_cv_lib_z_deflate+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lz  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char deflate ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-deflate ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_z_deflate=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_z_deflate=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_z_deflate" >&5
-echo "${ECHO_T}$ac_cv_lib_z_deflate" >&6
-if test $ac_cv_lib_z_deflate = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBZ 1
-_ACEOF
-
-  LIBS="-lz $LIBS"
-
-else
-  { { echo "$as_me:$LINENO: error: *** zlib missing - please install first or check config.log ***" >&5
-echo "$as_me: error: *** zlib missing - please install first or check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-
-echo "$as_me:$LINENO: checking for strcasecmp" >&5
-echo $ECHO_N "checking for strcasecmp... $ECHO_C" >&6
-if test "${ac_cv_func_strcasecmp+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char strcasecmp (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char strcasecmp ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_strcasecmp) || defined (__stub___strcasecmp)
-choke me
-#else
-f = strcasecmp;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_strcasecmp=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_strcasecmp=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_strcasecmp" >&5
-echo "${ECHO_T}$ac_cv_func_strcasecmp" >&6
-if test $ac_cv_func_strcasecmp = yes; then
-  :
-else
-   echo "$as_me:$LINENO: checking for strcasecmp in -lresolv" >&5
-echo $ECHO_N "checking for strcasecmp in -lresolv... $ECHO_C" >&6
-if test "${ac_cv_lib_resolv_strcasecmp+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lresolv  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char strcasecmp ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-strcasecmp ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_resolv_strcasecmp=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_resolv_strcasecmp=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_strcasecmp" >&5
-echo "${ECHO_T}$ac_cv_lib_resolv_strcasecmp" >&6
-if test $ac_cv_lib_resolv_strcasecmp = yes; then
-  LIBS="$LIBS -lresolv"
-fi
- 
-
-fi
-
-echo "$as_me:$LINENO: checking for utimes" >&5
-echo $ECHO_N "checking for utimes... $ECHO_C" >&6
-if test "${ac_cv_func_utimes+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char utimes (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char utimes ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_utimes) || defined (__stub___utimes)
-choke me
-#else
-f = utimes;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_utimes=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_utimes=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_utimes" >&5
-echo "${ECHO_T}$ac_cv_func_utimes" >&6
-if test $ac_cv_func_utimes = yes; then
-  :
-else
-   echo "$as_me:$LINENO: checking for utimes in -lc89" >&5
-echo $ECHO_N "checking for utimes in -lc89... $ECHO_C" >&6
-if test "${ac_cv_lib_c89_utimes+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lc89  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char utimes ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-utimes ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_c89_utimes=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_c89_utimes=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_c89_utimes" >&5
-echo "${ECHO_T}$ac_cv_lib_c89_utimes" >&6
-if test $ac_cv_lib_c89_utimes = yes; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_UTIMES 1
-_ACEOF
-
-                                        LIBS="$LIBS -lc89"
-fi
- 
-
-fi
-
-
-
-for ac_header in libutil.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-@%:@include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-
-done
-
-echo "$as_me:$LINENO: checking for library containing login" >&5
-echo $ECHO_N "checking for library containing login... $ECHO_C" >&6
-if test "${ac_cv_search_login+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_func_search_save_LIBS=$LIBS
-ac_cv_search_login=no
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char login ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-login ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_login="none required"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-if test "$ac_cv_search_login" = no; then
-  for ac_lib in util bsd; do
-    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char login ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-login ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_login="-l$ac_lib"
-break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-  done
-fi
-LIBS=$ac_func_search_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_search_login" >&5
-echo "${ECHO_T}$ac_cv_search_login" >&6
-if test "$ac_cv_search_login" != no; then
-  test "$ac_cv_search_login" = "none required" || LIBS="$ac_cv_search_login $LIBS"
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_LOGIN 1
-_ACEOF
-
-fi
-
-
-
-
-for ac_func in logout updwtmp logwtmp
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-f = $ac_func;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-
-for ac_func in strftime
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-f = $ac_func;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-else
-  # strftime is in -lintl on SCO UNIX.
-echo "$as_me:$LINENO: checking for strftime in -lintl" >&5
-echo $ECHO_N "checking for strftime in -lintl... $ECHO_C" >&6
-if test "${ac_cv_lib_intl_strftime+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lintl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char strftime ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-strftime ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_intl_strftime=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_intl_strftime=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_intl_strftime" >&5
-echo "${ECHO_T}$ac_cv_lib_intl_strftime" >&6
-if test $ac_cv_lib_intl_strftime = yes; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRFTIME 1
-_ACEOF
-
-LIBS="-lintl $LIBS"
-fi
-
-fi
-done
-
-
-# Check for ALTDIRFUNC glob() extension
-echo "$as_me:$LINENO: checking for GLOB_ALTDIRFUNC support" >&5
-echo $ECHO_N "checking for GLOB_ALTDIRFUNC support... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-                #include <glob.h>
-                #ifdef GLOB_ALTDIRFUNC
-                FOUNDIT
-                #endif
-        
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "FOUNDIT" >/dev/null 2>&1; then
-  
-                cat >>confdefs.h <<\_ACEOF
-@%:@define GLOB_HAS_ALTDIRFUNC 1
-_ACEOF
-
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-        
-else
-  
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        
-
-fi
-rm -f conftest*
-
-
-# Check for g.gl_matchc glob() extension
-echo "$as_me:$LINENO: checking for gl_matchc field in glob_t" >&5
-echo $ECHO_N "checking for gl_matchc field in glob_t... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-                #include <glob.h>
-                int main(void){glob_t g; g.gl_matchc = 1;}
-        
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "FOUNDIT" >/dev/null 2>&1; then
-  
-                cat >>confdefs.h <<\_ACEOF
-@%:@define GLOB_HAS_GL_MATCHC 1
-_ACEOF
-
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-        
-else
-  
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        
-
-fi
-rm -f conftest*
-
-
-echo "$as_me:$LINENO: checking whether struct dirent allocates space for d_name" >&5
-echo $ECHO_N "checking whether struct dirent allocates space for d_name... $ECHO_C" >&6
-if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <dirent.h>
-int main(void){struct dirent d;exit(sizeof(d.d_name)<=sizeof(char));}
-        
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_ONE_BYTE_DIRENT_D_NAME 1
-_ACEOF
-
-        
-
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-# Check whether user wants S/Key support
-SKEY_MSG="no" 
-
-# Check whether --with-skey or --without-skey was given.
-if test "${with_skey+set}" = set; then
-  withval="$with_skey"
-  
-                if test "x$withval" != "xno" ; then
-
-                        if test "x$withval" != "xyes" ; then
-                                CPPFLAGS="$CPPFLAGS -I${withval}/include"
-                                LDFLAGS="$LDFLAGS -L${withval}/lib"
-                        fi
-
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define SKEY 1
-_ACEOF
-
-                        LIBS="-lskey $LIBS"
-                        SKEY_MSG="yes" 
-        
-                        echo "$as_me:$LINENO: checking for s/key support" >&5
-echo $ECHO_N "checking for s/key support... $ECHO_C" >&6
-                        if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <stdio.h>
-#include <skey.h>
-int main() { char *ff = skey_keyinfo(""); ff=""; exit(0); }
-                                
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-
-                                        echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                                        { { echo "$as_me:$LINENO: error: ** Incomplete or missing s/key libraries." >&5
-echo "$as_me: error: ** Incomplete or missing s/key libraries." >&2;}
-   { (exit 1); exit 1; }; }
-                                
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-                fi
-        
-
-fi; 
-
-# Check whether user wants TCP wrappers support
-TCPW_MSG="no"
-
-# Check whether --with-tcp-wrappers or --without-tcp-wrappers was given.
-if test "${with_tcp_wrappers+set}" = set; then
-  withval="$with_tcp_wrappers"
-  
-                if test "x$withval" != "xno" ; then
-                        saved_LIBS="$LIBS"
-                        saved_LDFLAGS="$LDFLAGS"
-                        saved_CPPFLAGS="$CPPFLAGS"
-                        if test -n "${withval}" -a "${withval}" != "yes"; then
-                                if test -d "${withval}/lib"; then
-                                        if test -n "${need_dash_r}"; then
-                                                LDFLAGS="-L${withval}/lib -R${withval}/lib ${LDFLAGS}"
-                                        else
-                                                LDFLAGS="-L${withval}/lib ${LDFLAGS}"
-                                        fi
-                                else
-                                        if test -n "${need_dash_r}"; then
-                                                LDFLAGS="-L${withval} -R${withval} ${LDFLAGS}"
-                                        else
-                                                LDFLAGS="-L${withval} ${LDFLAGS}"
-                                        fi
-                                fi
-                                if test -d "${withval}/include"; then
-                                        CPPFLAGS="-I${withval}/include ${CPPFLAGS}"
-                                else
-                                        CPPFLAGS="-I${withval} ${CPPFLAGS}"
-                                fi
-                        fi
-                        LIBWRAP="-lwrap"
-                        LIBS="$LIBWRAP $LIBS"
-                        echo "$as_me:$LINENO: checking for libwrap" >&5
-echo $ECHO_N "checking for libwrap... $ECHO_C" >&6
-                        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <tcpd.h>
-                                        int deny_severity = 0, allow_severity = 0;
-                                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-hosts_access(0);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                                        cat >>confdefs.h <<\_ACEOF
-@%:@define LIBWRAP 1
-_ACEOF
-
-                                        
-                                        TCPW_MSG="yes"
-                                
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-
-                                        { { echo "$as_me:$LINENO: error: *** libwrap missing" >&5
-echo "$as_me: error: *** libwrap missing" >&2;}
-   { (exit 1); exit 1; }; }
-                                
-                        
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-                        LIBS="$saved_LIBS"
-                fi
-        
-
-fi; 
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-for ac_func in \
-        arc4random __b64_ntop b64_ntop __b64_pton b64_pton basename bcopy \
-        bindresvport_sa clock fchmod fchown freeaddrinfo futimes \
-        gai_strerror getaddrinfo getcwd getgrouplist getnameinfo getopt \
-        getpeereid _getpty getrlimit getrusage getttyent glob inet_aton \
-        inet_ntoa inet_ntop innetgr login_getcapbool md5_crypt memmove \
-        mkdtemp mmap ngetaddrinfo nsleep ogetaddrinfo openpty pstat \
-        readpassphrase realpath recvmsg rresvport_af sendmsg setdtablesize \
-        setegid setenv seteuid setgroups setlogin setpcred setproctitle \
-        setresgid setreuid setrlimit setsid setvbuf sigaction sigvec \
-        snprintf socketpair strerror strlcat strlcpy strmode strnvis \
-        sysconf tcgetpgrp truncate utimes vhangup vsnprintf waitpid \
-
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-f = $ac_func;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-echo "$as_me:$LINENO: checking for library containing nanosleep" >&5
-echo $ECHO_N "checking for library containing nanosleep... $ECHO_C" >&6
-if test "${ac_cv_search_nanosleep+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_func_search_save_LIBS=$LIBS
-ac_cv_search_nanosleep=no
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char nanosleep ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-nanosleep ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_nanosleep="none required"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-if test "$ac_cv_search_nanosleep" = no; then
-  for ac_lib in rt posix4; do
-    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char nanosleep ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-nanosleep ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_nanosleep="-l$ac_lib"
-break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-  done
-fi
-LIBS=$ac_func_search_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_search_nanosleep" >&5
-echo "${ECHO_T}$ac_cv_search_nanosleep" >&6
-if test "$ac_cv_search_nanosleep" != no; then
-  test "$ac_cv_search_nanosleep" = "none required" || LIBS="$ac_cv_search_nanosleep $LIBS"
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_NANOSLEEP 1
-_ACEOF
-
-fi
-
-
-echo "$as_me:$LINENO: checking whether strsep is declared" >&5
-echo $ECHO_N "checking whether strsep is declared... $ECHO_C" >&6
-if test "${ac_cv_have_decl_strsep+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-#ifndef strsep
-  char *p = (char *) strsep;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_have_decl_strsep=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_have_decl_strsep=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_decl_strsep" >&5
-echo "${ECHO_T}$ac_cv_have_decl_strsep" >&6
-if test $ac_cv_have_decl_strsep = yes; then
-  
-for ac_func in strsep
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-f = $ac_func;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-fi
-
-
-
-for ac_func in dirname
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-f = $ac_func;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-for ac_header in libgen.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-@%:@include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-
-done
- 
-else
-  
-        echo "$as_me:$LINENO: checking for dirname in -lgen" >&5
-echo $ECHO_N "checking for dirname in -lgen... $ECHO_C" >&6
-if test "${ac_cv_lib_gen_dirname+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgen  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dirname ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-dirname ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_gen_dirname=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_gen_dirname=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_gen_dirname" >&5
-echo "${ECHO_T}$ac_cv_lib_gen_dirname" >&6
-if test $ac_cv_lib_gen_dirname = yes; then
-  
-                echo "$as_me:$LINENO: checking for broken dirname" >&5
-echo $ECHO_N "checking for broken dirname... $ECHO_C" >&6
-if test "${ac_cv_have_broken_dirname+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                        save_LIBS="$LIBS"
-                        LIBS="$LIBS -lgen"
-                        if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <libgen.h>
-#include <string.h>
-
-int main(int argc, char **argv) {
-    char *s, buf[32];
-
-    strncpy(buf,"/etc", 32);
-    s = dirname(buf);
-    if (!s || strncmp(s, "/", 32) != 0) {
-        exit(1);
-    } else {
-        exit(0);
-    }
-}
-                                
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_broken_dirname="no" 
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
- ac_cv_have_broken_dirname="yes" 
-                        
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-                        LIBS="$save_LIBS"
-                
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_broken_dirname" >&5
-echo "${ECHO_T}$ac_cv_have_broken_dirname" >&6
-                if test "x$ac_cv_have_broken_dirname" = "xno" ; then
-                        LIBS="$LIBS -lgen"
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_DIRNAME 1
-_ACEOF
-
-                        
-for ac_header in libgen.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-@%:@include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-
-done
-
-                fi
-        
-fi
-
-
-fi
-done
-
-
-
-
-for ac_func in gettimeofday time
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-f = $ac_func;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-
-
-
-
-
-for ac_func in endutent getutent getutid getutline pututline setutent
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-f = $ac_func;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-for ac_func in utmpname
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-f = $ac_func;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-
-
-
-
-for ac_func in endutxent getutxent getutxid getutxline pututxline 
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-f = $ac_func;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-
-for ac_func in setutxent utmpxname
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-f = $ac_func;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-echo "$as_me:$LINENO: checking for daemon" >&5
-echo $ECHO_N "checking for daemon... $ECHO_C" >&6
-if test "${ac_cv_func_daemon+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char daemon (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char daemon ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_daemon) || defined (__stub___daemon)
-choke me
-#else
-f = daemon;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_daemon=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_daemon=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_daemon" >&5
-echo "${ECHO_T}$ac_cv_func_daemon" >&6
-if test $ac_cv_func_daemon = yes; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_DAEMON 1
-_ACEOF
-
-else
-  echo "$as_me:$LINENO: checking for daemon in -lbsd" >&5
-echo $ECHO_N "checking for daemon in -lbsd... $ECHO_C" >&6
-if test "${ac_cv_lib_bsd_daemon+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lbsd  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char daemon ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-daemon ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_bsd_daemon=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_bsd_daemon=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_daemon" >&5
-echo "${ECHO_T}$ac_cv_lib_bsd_daemon" >&6
-if test $ac_cv_lib_bsd_daemon = yes; then
-  LIBS="$LIBS -lbsd"; cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_DAEMON 1
-_ACEOF
-
-fi
-
-
-fi
-
-
-echo "$as_me:$LINENO: checking for getpagesize" >&5
-echo $ECHO_N "checking for getpagesize... $ECHO_C" >&6
-if test "${ac_cv_func_getpagesize+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char getpagesize (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char getpagesize ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_getpagesize) || defined (__stub___getpagesize)
-choke me
-#else
-f = getpagesize;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_getpagesize=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_getpagesize=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_getpagesize" >&5
-echo "${ECHO_T}$ac_cv_func_getpagesize" >&6
-if test $ac_cv_func_getpagesize = yes; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_GETPAGESIZE 1
-_ACEOF
-
-else
-  echo "$as_me:$LINENO: checking for getpagesize in -lucb" >&5
-echo $ECHO_N "checking for getpagesize in -lucb... $ECHO_C" >&6
-if test "${ac_cv_lib_ucb_getpagesize+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lucb  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char getpagesize ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-getpagesize ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_ucb_getpagesize=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_ucb_getpagesize=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_ucb_getpagesize" >&5
-echo "${ECHO_T}$ac_cv_lib_ucb_getpagesize" >&6
-if test $ac_cv_lib_ucb_getpagesize = yes; then
-  LIBS="$LIBS -lucb"; cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_GETPAGESIZE 1
-_ACEOF
-
-fi
-
-
-fi
-
-
-# Check for broken snprintf
-if test "x$ac_cv_func_snprintf" = "xyes" ; then
-        echo "$as_me:$LINENO: checking whether snprintf correctly terminates long strings" >&5
-echo $ECHO_N "checking whether snprintf correctly terminates long strings... $ECHO_C" >&6
-        if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <stdio.h>
-int main(void){char b[5];snprintf(b,5,"123456789");exit(b[4]!='\0');}
-                
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-
-                        echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_SNPRINTF 1
-_ACEOF
-
-                        { echo "$as_me:$LINENO: WARNING: ****** Your snprintf() function is broken, complain to your vendor" >&5
-echo "$as_me: WARNING: ****** Your snprintf() function is broken, complain to your vendor" >&2;}
-                
-        
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-
-if test "x$ac_cv_func_mkdtemp" = "xyes" ; then
-echo "$as_me:$LINENO: checking for (overly) strict mkstemp" >&5
-echo $ECHO_N "checking for (overly) strict mkstemp... $ECHO_C" >&6
-if test "$cross_compiling" = yes; then
-  
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRICT_MKSTEMP 1
-_ACEOF
-
-         
-
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <stdlib.h>
-main() { char template[]="conftest.mkstemp-test";
-if (mkstemp(template) == -1)
-        exit(1);
-unlink(template); exit(0);
-}
-        
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
- 
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRICT_MKSTEMP 1
-_ACEOF
-
-        
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-
-echo "$as_me:$LINENO: checking whether getpgrp requires zero arguments" >&5
-echo $ECHO_N "checking whether getpgrp requires zero arguments... $ECHO_C" >&6
-if test "${ac_cv_func_getpgrp_void+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # Use it with a single arg.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-getpgrp (0);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_getpgrp_void=no
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_func_getpgrp_void=yes
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_getpgrp_void" >&5
-echo "${ECHO_T}$ac_cv_func_getpgrp_void" >&6
-if test $ac_cv_func_getpgrp_void = yes; then
-  
-cat >>confdefs.h <<\_ACEOF
-@%:@define GETPGRP_VOID 1
-_ACEOF
-
-fi
-
-
-# Check for PAM libs
-PAM_MSG="no"
-
-# Check whether --with-pam or --without-pam was given.
-if test "${with_pam+set}" = set; then
-  withval="$with_pam"
-  
-                if test "x$withval" != "xno" ; then
-                        if test "x$ac_cv_header_security_pam_appl_h" != "xyes" ; then
-                                { { echo "$as_me:$LINENO: error: PAM headers not found" >&5
-echo "$as_me: error: PAM headers not found" >&2;}
-   { (exit 1); exit 1; }; }
-                        fi
-
-                        
-echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBDL 1
-_ACEOF
-
-  LIBS="-ldl $LIBS"
-
-fi
-
-                        
-echo "$as_me:$LINENO: checking for pam_set_item in -lpam" >&5
-echo $ECHO_N "checking for pam_set_item in -lpam... $ECHO_C" >&6
-if test "${ac_cv_lib_pam_pam_set_item+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpam  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char pam_set_item ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-pam_set_item ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_pam_pam_set_item=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_pam_pam_set_item=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_pam_pam_set_item" >&5
-echo "${ECHO_T}$ac_cv_lib_pam_pam_set_item" >&6
-if test $ac_cv_lib_pam_pam_set_item = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBPAM 1
-_ACEOF
-
-  LIBS="-lpam $LIBS"
-
-else
-  { { echo "$as_me:$LINENO: error: *** libpam missing" >&5
-echo "$as_me: error: *** libpam missing" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-                        
-for ac_func in pam_getenvlist
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-char (*f) ();
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-f = $ac_func;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-                        disable_shadow=yes
-                        PAM_MSG="yes"
-
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PAM 1
-_ACEOF
-
-                        if test $ac_cv_lib_dl_dlopen = yes; then
-                                LIBPAM="-lpam -ldl"
-                        else
-                                LIBPAM="-lpam"
-                        fi
-                        
-                fi
-        
-
-fi; 
-
-# Check for older PAM
-if test "x$PAM_MSG" = "xyes" ; then
-        # Check PAM strerror arguments (old PAM)
-        echo "$as_me:$LINENO: checking whether pam_strerror takes only one argument" >&5
-echo $ECHO_N "checking whether pam_strerror takes only one argument... $ECHO_C" >&6
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <stdlib.h>
-#include <security/pam_appl.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-(void)pam_strerror((pam_handle_t *)NULL, -1);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_OLD_PAM 1
-_ACEOF
-
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                        PAM_MSG="yes (old library)"
-                
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-
-# Some systems want crypt() from libcrypt, *not* the version in OpenSSL,
-# because the system crypt() is more featureful.
-if test "x$check_for_libcrypt_before" = "x1"; then
-        
-echo "$as_me:$LINENO: checking for crypt in -lcrypt" >&5
-echo $ECHO_N "checking for crypt in -lcrypt... $ECHO_C" >&6
-if test "${ac_cv_lib_crypt_crypt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lcrypt  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char crypt ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-crypt ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_crypt_crypt=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_crypt_crypt=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_crypt_crypt" >&5
-echo "${ECHO_T}$ac_cv_lib_crypt_crypt" >&6
-if test $ac_cv_lib_crypt_crypt = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBCRYPT 1
-_ACEOF
-
-  LIBS="-lcrypt $LIBS"
-
-fi
-
-fi
-
-# Search for OpenSSL
-saved_CPPFLAGS="$CPPFLAGS"
-saved_LDFLAGS="$LDFLAGS"
-
-# Check whether --with-ssl-dir or --without-ssl-dir was given.
-if test "${with_ssl_dir+set}" = set; then
-  withval="$with_ssl_dir"
-  
-                if test "x$withval" != "xno" ; then
-                        if test -d "$withval/lib"; then
-                                if test -n "${need_dash_r}"; then
-                                        LDFLAGS="-L${withval}/lib -R${withval}/lib ${LDFLAGS}"
-                                else
-                                        LDFLAGS="-L${withval}/lib ${LDFLAGS}"
-                                fi
-                        else
-                                if test -n "${need_dash_r}"; then
-                                        LDFLAGS="-L${withval} -R${withval} ${LDFLAGS}"
-                                else
-                                        LDFLAGS="-L${withval} ${LDFLAGS}"
-                                fi
-                        fi
-                        if test -d "$withval/include"; then
-                                CPPFLAGS="-I${withval}/include ${CPPFLAGS}"
-                        else
-                                CPPFLAGS="-I${withval} ${CPPFLAGS}"
-                        fi
-                fi
-        
-
-fi; 
-LIBS="$LIBS -lcrypto"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char RAND_add ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-RAND_add ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_OPENSSL 1
-_ACEOF
-
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-
-                                if test -n "${need_dash_r}"; then
-                        LDFLAGS="-L/usr/local/ssl/lib -R/usr/local/ssl/lib ${saved_LDFLAGS}"
-                else
-                        LDFLAGS="-L/usr/local/ssl/lib ${saved_LDFLAGS}"
-                fi
-                CPPFLAGS="-I/usr/local/ssl/include ${saved_CPPFLAGS}"
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char RAND_add ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-RAND_add ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_OPENSSL 1
-_ACEOF
-
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-
-                                { { echo "$as_me:$LINENO: error: *** Can't find recent OpenSSL libcrypto (see config.log for details) ***" >&5
-echo "$as_me: error: *** Can't find recent OpenSSL libcrypto (see config.log for details) ***" >&2;}
-   { (exit 1); exit 1; }; }
-                        
-                
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-        
-
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-# Determine OpenSSL header version
-echo "$as_me:$LINENO: checking OpenSSL header version" >&5
-echo $ECHO_N "checking OpenSSL header version... $ECHO_C" >&6
-if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <stdio.h>
-#include <string.h>
-#include <openssl/opensslv.h>
-#define DATA "conftest.sslincver"
-int main(void) {
-        FILE *fd;
-        int rc;
-
-        fd = fopen(DATA,"w");
-        if(fd == NULL)
-                exit(1);
-
-        if ((rc = fprintf(fd ,"%x (%s)\n", OPENSSL_VERSION_NUMBER, OPENSSL_VERSION_TEXT)) <0)
-                exit(1);
-
-        exit(0);
-}
-        
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                ssl_header_ver=`cat conftest.sslincver`
-                echo "$as_me:$LINENO: result: $ssl_header_ver" >&5
-echo "${ECHO_T}$ssl_header_ver" >&6
-        
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-
-                echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-                { { echo "$as_me:$LINENO: error: OpenSSL version header not found." >&5
-echo "$as_me: error: OpenSSL version header not found." >&2;}
-   { (exit 1); exit 1; }; }
-        
-
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-# Determine OpenSSL library version
-echo "$as_me:$LINENO: checking OpenSSL library version" >&5
-echo $ECHO_N "checking OpenSSL library version... $ECHO_C" >&6
-if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <stdio.h>
-#include <string.h>
-#include <openssl/opensslv.h>
-#include <openssl/crypto.h>
-#define DATA "conftest.ssllibver"
-int main(void) {
-        FILE *fd;
-        int rc;
-
-        fd = fopen(DATA,"w");
-        if(fd == NULL)
-                exit(1);
-
-        if ((rc = fprintf(fd ,"%x (%s)\n", SSLeay(), SSLeay_version(SSLEAY_VERSION))) <0)
-                exit(1);
-
-        exit(0);
-}
-        
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                ssl_library_ver=`cat conftest.ssllibver`
-                echo "$as_me:$LINENO: result: $ssl_library_ver" >&5
-echo "${ECHO_T}$ssl_library_ver" >&6
-        
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-
-                echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-                { { echo "$as_me:$LINENO: error: OpenSSL library not found." >&5
-echo "$as_me: error: OpenSSL library not found." >&2;}
-   { (exit 1); exit 1; }; }
-        
-
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-# Sanity check OpenSSL headers
-echo "$as_me:$LINENO: checking whether OpenSSL's headers match the library" >&5
-echo $ECHO_N "checking whether OpenSSL's headers match the library... $ECHO_C" >&6
-if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <string.h>
-#include <openssl/opensslv.h>
-int main(void) { exit(SSLeay() == OPENSSL_VERSION_NUMBER ? 0 : 1); }
-        
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-        
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                { { echo "$as_me:$LINENO: error: Your OpenSSL headers do not match your library" >&5
-echo "$as_me: error: Your OpenSSL headers do not match your library" >&2;}
-   { (exit 1); exit 1; }; }
-        
-
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-# Some Linux systems (Slackware) need crypt() from libcrypt, *not* the 
-# version in OpenSSL. Skip this for PAM
-if test "x$PAM_MSG" = "xno" -a "x$check_for_libcrypt_later" = "x1"; then
-        echo "$as_me:$LINENO: checking for crypt in -lcrypt" >&5
-echo $ECHO_N "checking for crypt in -lcrypt... $ECHO_C" >&6
-if test "${ac_cv_lib_crypt_crypt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lcrypt  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char crypt ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-crypt ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_crypt_crypt=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_crypt_crypt=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_crypt_crypt" >&5
-echo "${ECHO_T}$ac_cv_lib_crypt_crypt" >&6
-if test $ac_cv_lib_crypt_crypt = yes; then
-  LIBS="$LIBS -lcrypt"
-fi
-
-fi
-
-
-### Configure cryptographic random number support
-
-# Check wheter OpenSSL seeds itself
-echo "$as_me:$LINENO: checking whether OpenSSL's PRNG is internally seeded" >&5
-echo $ECHO_N "checking whether OpenSSL's PRNG is internally seeded... $ECHO_C" >&6
-if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <string.h>
-#include <openssl/rand.h>
-int main(void) { exit(RAND_status() == 1 ? 0 : 1); }
-        
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                OPENSSL_SEEDS_ITSELF=yes
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-        
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                # Default to use of the rand helper if OpenSSL doesn't
-                # seed itself
-                USE_RAND_HELPER=yes
-        
-
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-# Do we want to force the use of the rand helper?
-
-# Check whether --with-rand-helper or --without-rand-helper was given.
-if test "${with_rand_helper+set}" = set; then
-  withval="$with_rand_helper"
-  
-                if test "x$withval" = "xno" ; then
-                        # Force use of OpenSSL's internal RNG, even if 
-                        # the previous test showed it to be unseeded.
-                        if test -z "$OPENSSL_SEEDS_ITSELF" ; then
-                                { echo "$as_me:$LINENO: WARNING: *** Forcing use of OpenSSL's non-self-seeding PRNG" >&5
-echo "$as_me: WARNING: *** Forcing use of OpenSSL's non-self-seeding PRNG" >&2;}
-                                OPENSSL_SEEDS_ITSELF=yes
-                                USE_RAND_HELPER=""
-                        fi
-                else
-                        USE_RAND_HELPER=yes
-                fi
-        
-fi;     
-
-# Which randomness source do we use?
-if test ! -z "$OPENSSL_SEEDS_ITSELF" -a -z "$USE_RAND_HELPER" ; then
-        # OpenSSL only
-        cat >>confdefs.h <<\_ACEOF
-@%:@define OPENSSL_PRNG_ONLY 1
-_ACEOF
-
-        RAND_MSG="OpenSSL internal ONLY"
-        INSTALL_SSH_RAND_HELPER=""
-elif test ! -z "$USE_RAND_HELPER" ; then
-        # install rand helper
-        RAND_MSG="ssh-rand-helper"
-        INSTALL_SSH_RAND_HELPER="yes"
-fi
-
-
-### Configuration of ssh-rand-helper
-
-# PRNGD TCP socket
-
-# Check whether --with-prngd-port or --without-prngd-port was given.
-if test "${with_prngd_port+set}" = set; then
-  withval="$with_prngd_port"
-  
-                case "$withval" in
-                no)
-                        withval=""
-                        ;;
-                [0-9]*)
-                        ;;
-                *)
-                        { { echo "$as_me:$LINENO: error: You must specify a numeric port number for --with-prngd-port" >&5
-echo "$as_me: error: You must specify a numeric port number for --with-prngd-port" >&2;}
-   { (exit 1); exit 1; }; }
-                        ;;
-                esac
-                if test ! -z "$withval" ; then
-                        PRNGD_PORT="$withval"
-                        cat >>confdefs.h <<_ACEOF
-@%:@define PRNGD_PORT $PRNGD_PORT
-_ACEOF
-
-                fi
-        
-
-fi; 
-
-# PRNGD Unix domain socket
-
-# Check whether --with-prngd-socket or --without-prngd-socket was given.
-if test "${with_prngd_socket+set}" = set; then
-  withval="$with_prngd_socket"
-  
-                case "$withval" in
-                yes)
-                        withval="/var/run/egd-pool"
-                        ;;
-                no)
-                        withval=""
-                        ;;
-                /*)
-                        ;;
-                *)
-                        { { echo "$as_me:$LINENO: error: You must specify an absolute path to the entropy socket" >&5
-echo "$as_me: error: You must specify an absolute path to the entropy socket" >&2;}
-   { (exit 1); exit 1; }; }
-                        ;;
-                esac
-
-                if test ! -z "$withval" ; then
-                        if test ! -z "$PRNGD_PORT" ; then
-                                { { echo "$as_me:$LINENO: error: You may not specify both a PRNGD/EGD port and socket" >&5
-echo "$as_me: error: You may not specify both a PRNGD/EGD port and socket" >&2;}
-   { (exit 1); exit 1; }; }
-                        fi
-                        if test ! -r "$withval" ; then
-                                { echo "$as_me:$LINENO: WARNING: Entropy socket is not readable" >&5
-echo "$as_me: WARNING: Entropy socket is not readable" >&2;}
-                        fi
-                        PRNGD_SOCKET="$withval"
-                        cat >>confdefs.h <<_ACEOF
-@%:@define PRNGD_SOCKET "$PRNGD_SOCKET"
-_ACEOF
-
-                fi
-        
-else
-  
-                # Check for existing socket only if we don't have a random device already
-                if test "$USE_RAND_HELPER" = yes ; then
-                        echo "$as_me:$LINENO: checking for PRNGD/EGD socket" >&5
-echo $ECHO_N "checking for PRNGD/EGD socket... $ECHO_C" >&6
-                        # Insert other locations here
-                        for sock in /var/run/egd-pool /dev/egd-pool /etc/entropy; do
-                                if test -r $sock && $TEST_MINUS_S_SH -c "test -S $sock -o -p $sock" ; then
-                                        PRNGD_SOCKET="$sock"
-                                        cat >>confdefs.h <<_ACEOF
-@%:@define PRNGD_SOCKET "$PRNGD_SOCKET"
-_ACEOF
-
-                                        break;
-                                fi
-                        done
-                        if test ! -z "$PRNGD_SOCKET" ; then
-                                echo "$as_me:$LINENO: result: $PRNGD_SOCKET" >&5
-echo "${ECHO_T}$PRNGD_SOCKET" >&6
-                        else
-                                echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-                        fi
-                fi
-        
-
-fi; 
-
-# Change default command timeout for hashing entropy source
-entropy_timeout=200
-
-# Check whether --with-entropy-timeout or --without-entropy-timeout was given.
-if test "${with_entropy_timeout+set}" = set; then
-  withval="$with_entropy_timeout"
-  
-                if test "x$withval" != "xno" ; then
-                        entropy_timeout=$withval
-                fi
-                
-
-fi; 
-cat >>confdefs.h <<_ACEOF
-@%:@define ENTROPY_TIMEOUT_MSEC $entropy_timeout
-_ACEOF
-
-
-SSH_PRIVSEP_USER=sshd
-
-# Check whether --with-privsep-user or --without-privsep-user was given.
-if test "${with_privsep_user+set}" = set; then
-  withval="$with_privsep_user"
-  
-                if test -n "$withval"; then
-                        SSH_PRIVSEP_USER=$withval
-                fi
-                
-
-fi; 
-cat >>confdefs.h <<_ACEOF
-@%:@define SSH_PRIVSEP_USER "$SSH_PRIVSEP_USER"
-_ACEOF
-
-
-
-# We do this little dance with the search path to insure
-# that programs that we select for use by installed programs
-# (which may be run by the super-user) come from trusted
-# locations before they come from the user's private area.
-# This should help avoid accidentally configuring some
-# random version of a program in someone's personal bin.
-
-OPATH=$PATH
-PATH=/bin:/usr/bin
-test -h /bin 2> /dev/null && PATH=/usr/bin
-test -d /sbin && PATH=$PATH:/sbin
-test -d /usr/sbin && PATH=$PATH:/usr/sbin
-PATH=$PATH:/etc:$OPATH
-
-# These programs are used by the command hashing source to gather entropy 
-
-        # Extract the first word of "ls", so it can be a program name with args.
-set dummy ls; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_LS+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_LS in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_LS="$PROG_LS" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_LS="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_LS=$ac_cv_path_PROG_LS
-
-if test -n "$PROG_LS"; then
-  echo "$as_me:$LINENO: result: $PROG_LS" >&5
-echo "${ECHO_T}$PROG_LS" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_LS" ; then
-                PROG_LS="undef"
-        fi
-        
-
-
-        # Extract the first word of "netstat", so it can be a program name with args.
-set dummy netstat; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_NETSTAT+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_NETSTAT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_NETSTAT="$PROG_NETSTAT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_NETSTAT="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_NETSTAT=$ac_cv_path_PROG_NETSTAT
-
-if test -n "$PROG_NETSTAT"; then
-  echo "$as_me:$LINENO: result: $PROG_NETSTAT" >&5
-echo "${ECHO_T}$PROG_NETSTAT" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_NETSTAT" ; then
-                PROG_NETSTAT="undef"
-        fi
-        
-
-
-        # Extract the first word of "arp", so it can be a program name with args.
-set dummy arp; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_ARP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_ARP in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_ARP="$PROG_ARP" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_ARP="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_ARP=$ac_cv_path_PROG_ARP
-
-if test -n "$PROG_ARP"; then
-  echo "$as_me:$LINENO: result: $PROG_ARP" >&5
-echo "${ECHO_T}$PROG_ARP" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_ARP" ; then
-                PROG_ARP="undef"
-        fi
-        
-
-
-        # Extract the first word of "ifconfig", so it can be a program name with args.
-set dummy ifconfig; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_IFCONFIG+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_IFCONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_IFCONFIG="$PROG_IFCONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_IFCONFIG="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_IFCONFIG=$ac_cv_path_PROG_IFCONFIG
-
-if test -n "$PROG_IFCONFIG"; then
-  echo "$as_me:$LINENO: result: $PROG_IFCONFIG" >&5
-echo "${ECHO_T}$PROG_IFCONFIG" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_IFCONFIG" ; then
-                PROG_IFCONFIG="undef"
-        fi
-        
-
-
-        # Extract the first word of "jstat", so it can be a program name with args.
-set dummy jstat; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_JSTAT+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_JSTAT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_JSTAT="$PROG_JSTAT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_JSTAT="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_JSTAT=$ac_cv_path_PROG_JSTAT
-
-if test -n "$PROG_JSTAT"; then
-  echo "$as_me:$LINENO: result: $PROG_JSTAT" >&5
-echo "${ECHO_T}$PROG_JSTAT" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_JSTAT" ; then
-                PROG_JSTAT="undef"
-        fi
-        
-
-
-        # Extract the first word of "ps", so it can be a program name with args.
-set dummy ps; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_PS+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_PS in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_PS="$PROG_PS" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_PS="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_PS=$ac_cv_path_PROG_PS
-
-if test -n "$PROG_PS"; then
-  echo "$as_me:$LINENO: result: $PROG_PS" >&5
-echo "${ECHO_T}$PROG_PS" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_PS" ; then
-                PROG_PS="undef"
-        fi
-        
-
-
-        # Extract the first word of "sar", so it can be a program name with args.
-set dummy sar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_SAR+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_SAR in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_SAR="$PROG_SAR" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_SAR="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_SAR=$ac_cv_path_PROG_SAR
-
-if test -n "$PROG_SAR"; then
-  echo "$as_me:$LINENO: result: $PROG_SAR" >&5
-echo "${ECHO_T}$PROG_SAR" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_SAR" ; then
-                PROG_SAR="undef"
-        fi
-        
-
-
-        # Extract the first word of "w", so it can be a program name with args.
-set dummy w; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_W+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_W in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_W="$PROG_W" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_W="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_W=$ac_cv_path_PROG_W
-
-if test -n "$PROG_W"; then
-  echo "$as_me:$LINENO: result: $PROG_W" >&5
-echo "${ECHO_T}$PROG_W" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_W" ; then
-                PROG_W="undef"
-        fi
-        
-
-
-        # Extract the first word of "who", so it can be a program name with args.
-set dummy who; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_WHO+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_WHO in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_WHO="$PROG_WHO" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_WHO="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_WHO=$ac_cv_path_PROG_WHO
-
-if test -n "$PROG_WHO"; then
-  echo "$as_me:$LINENO: result: $PROG_WHO" >&5
-echo "${ECHO_T}$PROG_WHO" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_WHO" ; then
-                PROG_WHO="undef"
-        fi
-        
-
-
-        # Extract the first word of "last", so it can be a program name with args.
-set dummy last; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_LAST+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_LAST in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_LAST="$PROG_LAST" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_LAST="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_LAST=$ac_cv_path_PROG_LAST
-
-if test -n "$PROG_LAST"; then
-  echo "$as_me:$LINENO: result: $PROG_LAST" >&5
-echo "${ECHO_T}$PROG_LAST" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_LAST" ; then
-                PROG_LAST="undef"
-        fi
-        
-
-
-        # Extract the first word of "lastlog", so it can be a program name with args.
-set dummy lastlog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_LASTLOG+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_LASTLOG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_LASTLOG="$PROG_LASTLOG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_LASTLOG="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_LASTLOG=$ac_cv_path_PROG_LASTLOG
-
-if test -n "$PROG_LASTLOG"; then
-  echo "$as_me:$LINENO: result: $PROG_LASTLOG" >&5
-echo "${ECHO_T}$PROG_LASTLOG" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_LASTLOG" ; then
-                PROG_LASTLOG="undef"
-        fi
-        
-
-
-        # Extract the first word of "df", so it can be a program name with args.
-set dummy df; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_DF+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_DF in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_DF="$PROG_DF" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_DF="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_DF=$ac_cv_path_PROG_DF
-
-if test -n "$PROG_DF"; then
-  echo "$as_me:$LINENO: result: $PROG_DF" >&5
-echo "${ECHO_T}$PROG_DF" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_DF" ; then
-                PROG_DF="undef"
-        fi
-        
-
-
-        # Extract the first word of "vmstat", so it can be a program name with args.
-set dummy vmstat; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_VMSTAT+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_VMSTAT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_VMSTAT="$PROG_VMSTAT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_VMSTAT="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_VMSTAT=$ac_cv_path_PROG_VMSTAT
-
-if test -n "$PROG_VMSTAT"; then
-  echo "$as_me:$LINENO: result: $PROG_VMSTAT" >&5
-echo "${ECHO_T}$PROG_VMSTAT" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_VMSTAT" ; then
-                PROG_VMSTAT="undef"
-        fi
-        
-
-
-        # Extract the first word of "uptime", so it can be a program name with args.
-set dummy uptime; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_UPTIME+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_UPTIME in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_UPTIME="$PROG_UPTIME" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_UPTIME="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_UPTIME=$ac_cv_path_PROG_UPTIME
-
-if test -n "$PROG_UPTIME"; then
-  echo "$as_me:$LINENO: result: $PROG_UPTIME" >&5
-echo "${ECHO_T}$PROG_UPTIME" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_UPTIME" ; then
-                PROG_UPTIME="undef"
-        fi
-        
-
-
-        # Extract the first word of "ipcs", so it can be a program name with args.
-set dummy ipcs; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_IPCS+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_IPCS in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_IPCS="$PROG_IPCS" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_IPCS="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_IPCS=$ac_cv_path_PROG_IPCS
-
-if test -n "$PROG_IPCS"; then
-  echo "$as_me:$LINENO: result: $PROG_IPCS" >&5
-echo "${ECHO_T}$PROG_IPCS" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_IPCS" ; then
-                PROG_IPCS="undef"
-        fi
-        
-
-
-        # Extract the first word of "tail", so it can be a program name with args.
-set dummy tail; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_TAIL+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_TAIL in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_TAIL="$PROG_TAIL" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_TAIL="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_TAIL=$ac_cv_path_PROG_TAIL
-
-if test -n "$PROG_TAIL"; then
-  echo "$as_me:$LINENO: result: $PROG_TAIL" >&5
-echo "${ECHO_T}$PROG_TAIL" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_TAIL" ; then
-                PROG_TAIL="undef"
-        fi
-        
-
-# restore PATH
-PATH=$OPATH
-
-# Where does ssh-rand-helper get its randomness from?
-INSTALL_SSH_PRNG_CMDS=""
-if test ! -z "$INSTALL_SSH_RAND_HELPER" ; then
-        if test ! -z "$PRNGD_PORT" ; then
-                RAND_HELPER_MSG="TCP localhost:$PRNGD_PORT"
-        elif test ! -z "$PRNGD_SOCKET" ; then
-                RAND_HELPER_MSG="Unix domain socket \"$PRNGD_SOCKET\""
-        else
-                RAND_HELPER_MSG="Command hashing (timeout $entropy_timeout)"
-                RAND_HELPER_CMDHASH=yes
-                INSTALL_SSH_PRNG_CMDS="yes"
-        fi
-fi
-
-
-
-# Cheap hack to ensure NEWS-OS libraries are arranged right.
-if test ! -z "$SONY" ; then
-  LIBS="$LIBS -liberty";
-fi
-
-# Checks for data types
-echo "$as_me:$LINENO: checking for char" >&5
-echo $ECHO_N "checking for char... $ECHO_C" >&6
-if test "${ac_cv_type_char+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-if ((char *) 0)
-  return 0;
-if (sizeof (char))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_char=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_type_char=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_char" >&5
-echo "${ECHO_T}$ac_cv_type_char" >&6
-
-echo "$as_me:$LINENO: checking size of char" >&5
-echo $ECHO_N "checking size of char... $ECHO_C" >&6
-if test "${ac_cv_sizeof_char+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_char" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (char))) >= 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (char))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo=`expr $ac_mid + 1`
-                    if test $ac_lo -le $ac_mid; then
-                      ac_lo= ac_hi=
-                      break
-                    fi
-                    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (char))) < 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (char))) >= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_hi=`expr '(' $ac_mid ')' - 1`
-                       if test $ac_mid -le $ac_hi; then
-                         ac_lo= ac_hi=
-                         break
-                       fi
-                       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo= ac_hi=
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (char))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_char=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (char), 77" >&5
-echo "$as_me: error: cannot compute sizeof (char), 77" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-long longval () { return (long) (sizeof (char)); }
-unsigned long ulongval () { return (long) (sizeof (char)); }
-@%:@include <stdio.h>
-@%:@include <stdlib.h>
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (char))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (char))))
-        exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (char))))
-        exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_char=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (char), 77" >&5
-echo "$as_me: error: cannot compute sizeof (char), 77" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_char=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_char" >&5
-echo "${ECHO_T}$ac_cv_sizeof_char" >&6
-cat >>confdefs.h <<_ACEOF
-@%:@define SIZEOF_CHAR $ac_cv_sizeof_char
-_ACEOF
-
-
-echo "$as_me:$LINENO: checking for short int" >&5
-echo $ECHO_N "checking for short int... $ECHO_C" >&6
-if test "${ac_cv_type_short_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-if ((short int *) 0)
-  return 0;
-if (sizeof (short int))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_short_int=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_type_short_int=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_short_int" >&5
-echo "${ECHO_T}$ac_cv_type_short_int" >&6
-
-echo "$as_me:$LINENO: checking size of short int" >&5
-echo $ECHO_N "checking size of short int... $ECHO_C" >&6
-if test "${ac_cv_sizeof_short_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_short_int" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (short int))) >= 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (short int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo=`expr $ac_mid + 1`
-                    if test $ac_lo -le $ac_mid; then
-                      ac_lo= ac_hi=
-                      break
-                    fi
-                    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (short int))) < 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (short int))) >= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_hi=`expr '(' $ac_mid ')' - 1`
-                       if test $ac_mid -le $ac_hi; then
-                         ac_lo= ac_hi=
-                         break
-                       fi
-                       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo= ac_hi=
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (short int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_short_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (short int), 77" >&5
-echo "$as_me: error: cannot compute sizeof (short int), 77" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-long longval () { return (long) (sizeof (short int)); }
-unsigned long ulongval () { return (long) (sizeof (short int)); }
-@%:@include <stdio.h>
-@%:@include <stdlib.h>
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (short int))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (short int))))
-        exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (short int))))
-        exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_short_int=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (short int), 77" >&5
-echo "$as_me: error: cannot compute sizeof (short int), 77" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_short_int=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_short_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_short_int" >&6
-cat >>confdefs.h <<_ACEOF
-@%:@define SIZEOF_SHORT_INT $ac_cv_sizeof_short_int
-_ACEOF
-
-
-echo "$as_me:$LINENO: checking for int" >&5
-echo $ECHO_N "checking for int... $ECHO_C" >&6
-if test "${ac_cv_type_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-if ((int *) 0)
-  return 0;
-if (sizeof (int))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_int=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_type_int=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5
-echo "${ECHO_T}$ac_cv_type_int" >&6
-
-echo "$as_me:$LINENO: checking size of int" >&5
-echo $ECHO_N "checking size of int... $ECHO_C" >&6
-if test "${ac_cv_sizeof_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_int" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (int))) >= 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo=`expr $ac_mid + 1`
-                    if test $ac_lo -le $ac_mid; then
-                      ac_lo= ac_hi=
-                      break
-                    fi
-                    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (int))) < 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (int))) >= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_hi=`expr '(' $ac_mid ')' - 1`
-                       if test $ac_mid -le $ac_hi; then
-                         ac_lo= ac_hi=
-                         break
-                       fi
-                       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo= ac_hi=
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77" >&5
-echo "$as_me: error: cannot compute sizeof (int), 77" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-long longval () { return (long) (sizeof (int)); }
-unsigned long ulongval () { return (long) (sizeof (int)); }
-@%:@include <stdio.h>
-@%:@include <stdlib.h>
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (int))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (int))))
-        exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (int))))
-        exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_int=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77" >&5
-echo "$as_me: error: cannot compute sizeof (int), 77" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_int=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_int" >&6
-cat >>confdefs.h <<_ACEOF
-@%:@define SIZEOF_INT $ac_cv_sizeof_int
-_ACEOF
-
-
-echo "$as_me:$LINENO: checking for long int" >&5
-echo $ECHO_N "checking for long int... $ECHO_C" >&6
-if test "${ac_cv_type_long_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-if ((long int *) 0)
-  return 0;
-if (sizeof (long int))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_long_int=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_type_long_int=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_long_int" >&5
-echo "${ECHO_T}$ac_cv_type_long_int" >&6
-
-echo "$as_me:$LINENO: checking size of long int" >&5
-echo $ECHO_N "checking size of long int... $ECHO_C" >&6
-if test "${ac_cv_sizeof_long_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_long_int" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long int))) >= 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo=`expr $ac_mid + 1`
-                    if test $ac_lo -le $ac_mid; then
-                      ac_lo= ac_hi=
-                      break
-                    fi
-                    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long int))) < 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long int))) >= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_hi=`expr '(' $ac_mid ')' - 1`
-                       if test $ac_mid -le $ac_hi; then
-                         ac_lo= ac_hi=
-                         break
-                       fi
-                       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo= ac_hi=
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_long_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long int), 77" >&5
-echo "$as_me: error: cannot compute sizeof (long int), 77" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-long longval () { return (long) (sizeof (long int)); }
-unsigned long ulongval () { return (long) (sizeof (long int)); }
-@%:@include <stdio.h>
-@%:@include <stdlib.h>
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (long int))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (long int))))
-        exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (long int))))
-        exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_long_int=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long int), 77" >&5
-echo "$as_me: error: cannot compute sizeof (long int), 77" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_long_int=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_long_int" >&6
-cat >>confdefs.h <<_ACEOF
-@%:@define SIZEOF_LONG_INT $ac_cv_sizeof_long_int
-_ACEOF
-
-
-echo "$as_me:$LINENO: checking for long long int" >&5
-echo $ECHO_N "checking for long long int... $ECHO_C" >&6
-if test "${ac_cv_type_long_long_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-if ((long long int *) 0)
-  return 0;
-if (sizeof (long long int))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_long_long_int=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_type_long_long_int=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_long_long_int" >&5
-echo "${ECHO_T}$ac_cv_type_long_long_int" >&6
-
-echo "$as_me:$LINENO: checking size of long long int" >&5
-echo $ECHO_N "checking size of long long int... $ECHO_C" >&6
-if test "${ac_cv_sizeof_long_long_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_long_long_int" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long long int))) >= 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long long int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo=`expr $ac_mid + 1`
-                    if test $ac_lo -le $ac_mid; then
-                      ac_lo= ac_hi=
-                      break
-                    fi
-                    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long long int))) < 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long long int))) >= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_hi=`expr '(' $ac_mid ')' - 1`
-                       if test $ac_mid -le $ac_hi; then
-                         ac_lo= ac_hi=
-                         break
-                       fi
-                       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo= ac_hi=
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long long int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_long_long_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long long int), 77" >&5
-echo "$as_me: error: cannot compute sizeof (long long int), 77" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-long longval () { return (long) (sizeof (long long int)); }
-unsigned long ulongval () { return (long) (sizeof (long long int)); }
-@%:@include <stdio.h>
-@%:@include <stdlib.h>
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (long long int))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (long long int))))
-        exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (long long int))))
-        exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_long_long_int=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long long int), 77" >&5
-echo "$as_me: error: cannot compute sizeof (long long int), 77" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_long_long_int=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_long_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_long_long_int" >&6
-cat >>confdefs.h <<_ACEOF
-@%:@define SIZEOF_LONG_LONG_INT $ac_cv_sizeof_long_long_int
-_ACEOF
-
-
-
-# Sanity check long long for some platforms (AIX)
-if test "x$ac_cv_sizeof_long_long_int" = "x4" ; then
-        ac_cv_sizeof_long_long_int=0
-fi
-
-# More checks for data types
-echo "$as_me:$LINENO: checking for u_int type" >&5
-echo $ECHO_N "checking for u_int type... $ECHO_C" >&6
-if test "${ac_cv_have_u_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
- #include <sys/types.h> 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- u_int a; a = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_u_int="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_u_int="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_u_int" >&5
-echo "${ECHO_T}$ac_cv_have_u_int" >&6
-if test "x$ac_cv_have_u_int" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_U_INT 1
-_ACEOF
-
-        have_u_int=1
-fi
-
-echo "$as_me:$LINENO: checking for intXX_t types" >&5
-echo $ECHO_N "checking for intXX_t types... $ECHO_C" >&6
-if test "${ac_cv_have_intxx_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
- #include <sys/types.h> 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- int8_t a; int16_t b; int32_t c; a = b = c = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_intxx_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_intxx_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_intxx_t" >&5
-echo "${ECHO_T}$ac_cv_have_intxx_t" >&6
-if test "x$ac_cv_have_intxx_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_INTXX_T 1
-_ACEOF
-
-        have_intxx_t=1
-fi
-
-if (test -z "$have_intxx_t" && \
-           test "x$ac_cv_header_stdint_h" = "xyes")
-then
-    echo "$as_me:$LINENO: checking for intXX_t types in stdint.h" >&5
-echo $ECHO_N "checking for intXX_t types in stdint.h... $ECHO_C" >&6
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
- #include <stdint.h> 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- int8_t a; int16_t b; int32_t c; a = b = c = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_INTXX_T 1
-_ACEOF
-
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-
-echo "$as_me:$LINENO: checking for int64_t type" >&5
-echo $ECHO_N "checking for int64_t type... $ECHO_C" >&6
-if test "${ac_cv_have_int64_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#ifdef HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#include <sys/socket.h>
-#ifdef HAVE_SYS_BITYPES_H
-# include <sys/bitypes.h>
-#endif
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- int64_t a; a = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_int64_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_int64_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_int64_t" >&5
-echo "${ECHO_T}$ac_cv_have_int64_t" >&6
-if test "x$ac_cv_have_int64_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_INT64_T 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for u_intXX_t types" >&5
-echo $ECHO_N "checking for u_intXX_t types... $ECHO_C" >&6
-if test "${ac_cv_have_u_intxx_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
- #include <sys/types.h> 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- u_int8_t a; u_int16_t b; u_int32_t c; a = b = c = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_u_intxx_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_u_intxx_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_u_intxx_t" >&5
-echo "${ECHO_T}$ac_cv_have_u_intxx_t" >&6
-if test "x$ac_cv_have_u_intxx_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_U_INTXX_T 1
-_ACEOF
-
-        have_u_intxx_t=1
-fi
-
-if test -z "$have_u_intxx_t" ; then
-    echo "$as_me:$LINENO: checking for u_intXX_t types in sys/socket.h" >&5
-echo $ECHO_N "checking for u_intXX_t types in sys/socket.h... $ECHO_C" >&6
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
- #include <sys/socket.h> 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- u_int8_t a; u_int16_t b; u_int32_t c; a = b = c = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_U_INTXX_T 1
-_ACEOF
-
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-
-echo "$as_me:$LINENO: checking for u_int64_t types" >&5
-echo $ECHO_N "checking for u_int64_t types... $ECHO_C" >&6
-if test "${ac_cv_have_u_int64_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
- #include <sys/types.h> 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- u_int64_t a; a = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_u_int64_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_u_int64_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_u_int64_t" >&5
-echo "${ECHO_T}$ac_cv_have_u_int64_t" >&6
-if test "x$ac_cv_have_u_int64_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_U_INT64_T 1
-_ACEOF
-
-        have_u_int64_t=1
-fi
-
-if test -z "$have_u_int64_t" ; then
-    echo "$as_me:$LINENO: checking for u_int64_t type in sys/bitypes.h" >&5
-echo $ECHO_N "checking for u_int64_t type in sys/bitypes.h... $ECHO_C" >&6
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
- #include <sys/bitypes.h> 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- u_int64_t a; a = 1
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_U_INT64_T 1
-_ACEOF
-
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-
-if test -z "$have_u_intxx_t" ; then
-        echo "$as_me:$LINENO: checking for uintXX_t types" >&5
-echo $ECHO_N "checking for uintXX_t types... $ECHO_C" >&6
-if test "${ac_cv_have_uintxx_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-                        
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- uint8_t a; uint16_t b; uint32_t c; a = b = c = 1; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_uintxx_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_uintxx_t="no" 
-                
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-        
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_uintxx_t" >&5
-echo "${ECHO_T}$ac_cv_have_uintxx_t" >&6
-        if test "x$ac_cv_have_uintxx_t" = "xyes" ; then
-                cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_UINTXX_T 1
-_ACEOF
-
-        fi
-fi
-
-if test -z "$have_uintxx_t" ; then
-    echo "$as_me:$LINENO: checking for uintXX_t types in stdint.h" >&5
-echo $ECHO_N "checking for uintXX_t types in stdint.h... $ECHO_C" >&6
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
- #include <stdint.h> 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- uint8_t a; uint16_t b; uint32_t c; a = b = c = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_UINTXX_T 1
-_ACEOF
-
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-
-if (test -z "$have_u_intxx_t" || test -z "$have_intxx_t" && \
-           test "x$ac_cv_header_sys_bitypes_h" = "xyes")
-then
-        echo "$as_me:$LINENO: checking for intXX_t and u_intXX_t types in sys/bitypes.h" >&5
-echo $ECHO_N "checking for intXX_t and u_intXX_t types in sys/bitypes.h... $ECHO_C" >&6
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/bitypes.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-                        int8_t a; int16_t b; int32_t c;
-                        u_int8_t e; u_int16_t f; u_int32_t g;
-                        a = b = c = e = f = g = 1;
-                
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_U_INTXX_T 1
-_ACEOF
-
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_INTXX_T 1
-_ACEOF
-
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext 
-fi
-
-
-echo "$as_me:$LINENO: checking for u_char" >&5
-echo $ECHO_N "checking for u_char... $ECHO_C" >&6
-if test "${ac_cv_have_u_char+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- u_char foo; foo = 125; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_u_char="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_u_char="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_u_char" >&5
-echo "${ECHO_T}$ac_cv_have_u_char" >&6
-if test "x$ac_cv_have_u_char" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_U_CHAR 1
-_ACEOF
-
-fi
-
-
-   echo "$as_me:$LINENO: checking for socklen_t" >&5
-echo $ECHO_N "checking for socklen_t... $ECHO_C" >&6
-if test "${ac_cv_type_socklen_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/socket.h>
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-if ((socklen_t *) 0)
-  return 0;
-if (sizeof (socklen_t))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_socklen_t=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_type_socklen_t=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_socklen_t" >&5
-echo "${ECHO_T}$ac_cv_type_socklen_t" >&6
-if test $ac_cv_type_socklen_t = yes; then
-  :
-else
-  
-      echo "$as_me:$LINENO: checking for socklen_t equivalent" >&5
-echo $ECHO_N "checking for socklen_t equivalent... $ECHO_C" >&6
-      if test "${curl_cv_socklen_t_equiv+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-         # Systems have either "struct sockaddr *" or
-         # "void *" as the second argument to getpeername
-         curl_cv_socklen_t_equiv=
-         for arg2 in "struct sockaddr" void; do
-            for t in int size_t unsigned long "unsigned long"; do
-               cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-                  #include <sys/types.h>
-                  #include <sys/socket.h>
-
-                  int getpeername (int, $arg2 *, $t *);
-               
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-
-                  $t len;
-                  getpeername(0,0,&len);
-               
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                  curl_cv_socklen_t_equiv="$t"
-                  break
-               
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-            done
-         done
-
-         if test "x$curl_cv_socklen_t_equiv" = x; then
-            { { echo "$as_me:$LINENO: error: Cannot find a type to use in place of socklen_t" >&5
-echo "$as_me: error: Cannot find a type to use in place of socklen_t" >&2;}
-   { (exit 1); exit 1; }; }
-         fi
-      
-fi
-
-      echo "$as_me:$LINENO: result: $curl_cv_socklen_t_equiv" >&5
-echo "${ECHO_T}$curl_cv_socklen_t_equiv" >&6
-      
-cat >>confdefs.h <<_ACEOF
-@%:@define socklen_t $curl_cv_socklen_t_equiv
-_ACEOF
-
-fi
-
-
-
-echo "$as_me:$LINENO: checking for sig_atomic_t" >&5
-echo $ECHO_N "checking for sig_atomic_t... $ECHO_C" >&6
-if test "${ac_cv_type_sig_atomic_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <signal.h>
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-if ((sig_atomic_t *) 0)
-  return 0;
-if (sizeof (sig_atomic_t))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_sig_atomic_t=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_type_sig_atomic_t=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_sig_atomic_t" >&5
-echo "${ECHO_T}$ac_cv_type_sig_atomic_t" >&6
-if test $ac_cv_type_sig_atomic_t = yes; then
-  
-cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_SIG_ATOMIC_T 1
-_ACEOF
-
-
-fi
-
-
-echo "$as_me:$LINENO: checking for size_t" >&5
-echo $ECHO_N "checking for size_t... $ECHO_C" >&6
-if test "${ac_cv_have_size_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- size_t foo; foo = 1235; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_size_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_size_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_size_t" >&5
-echo "${ECHO_T}$ac_cv_have_size_t" >&6
-if test "x$ac_cv_have_size_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SIZE_T 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for ssize_t" >&5
-echo $ECHO_N "checking for ssize_t... $ECHO_C" >&6
-if test "${ac_cv_have_ssize_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- ssize_t foo; foo = 1235; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_ssize_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_ssize_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_ssize_t" >&5
-echo "${ECHO_T}$ac_cv_have_ssize_t" >&6
-if test "x$ac_cv_have_ssize_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SSIZE_T 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for clock_t" >&5
-echo $ECHO_N "checking for clock_t... $ECHO_C" >&6
-if test "${ac_cv_have_clock_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <time.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- clock_t foo; foo = 1235; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_clock_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_clock_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_clock_t" >&5
-echo "${ECHO_T}$ac_cv_have_clock_t" >&6
-if test "x$ac_cv_have_clock_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_CLOCK_T 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for sa_family_t" >&5
-echo $ECHO_N "checking for sa_family_t... $ECHO_C" >&6
-if test "${ac_cv_have_sa_family_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <sys/socket.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- sa_family_t foo; foo = 1235; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_sa_family_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- sa_family_t foo; foo = 1235; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_sa_family_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_sa_family_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_sa_family_t" >&5
-echo "${ECHO_T}$ac_cv_have_sa_family_t" >&6
-if test "x$ac_cv_have_sa_family_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SA_FAMILY_T 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for pid_t" >&5
-echo $ECHO_N "checking for pid_t... $ECHO_C" >&6
-if test "${ac_cv_have_pid_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- pid_t foo; foo = 1235; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_pid_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_pid_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_pid_t" >&5
-echo "${ECHO_T}$ac_cv_have_pid_t" >&6
-if test "x$ac_cv_have_pid_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_PID_T 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for mode_t" >&5
-echo $ECHO_N "checking for mode_t... $ECHO_C" >&6
-if test "${ac_cv_have_mode_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- mode_t foo; foo = 1235; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_mode_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_mode_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_mode_t" >&5
-echo "${ECHO_T}$ac_cv_have_mode_t" >&6
-if test "x$ac_cv_have_mode_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_MODE_T 1
-_ACEOF
-
-fi
-
-
-echo "$as_me:$LINENO: checking for struct sockaddr_storage" >&5
-echo $ECHO_N "checking for struct sockaddr_storage... $ECHO_C" >&6
-if test "${ac_cv_have_struct_sockaddr_storage+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <sys/socket.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- struct sockaddr_storage s; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_struct_sockaddr_storage="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_struct_sockaddr_storage="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_struct_sockaddr_storage" >&5
-echo "${ECHO_T}$ac_cv_have_struct_sockaddr_storage" >&6
-if test "x$ac_cv_have_struct_sockaddr_storage" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRUCT_SOCKADDR_STORAGE 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for struct sockaddr_in6" >&5
-echo $ECHO_N "checking for struct sockaddr_in6... $ECHO_C" >&6
-if test "${ac_cv_have_struct_sockaddr_in6+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <netinet/in.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- struct sockaddr_in6 s; s.sin6_family = 0; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_struct_sockaddr_in6="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_struct_sockaddr_in6="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_struct_sockaddr_in6" >&5
-echo "${ECHO_T}$ac_cv_have_struct_sockaddr_in6" >&6
-if test "x$ac_cv_have_struct_sockaddr_in6" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRUCT_SOCKADDR_IN6 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for struct in6_addr" >&5
-echo $ECHO_N "checking for struct in6_addr... $ECHO_C" >&6
-if test "${ac_cv_have_struct_in6_addr+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <netinet/in.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- struct in6_addr s; s.s6_addr[0] = 0; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_struct_in6_addr="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_struct_in6_addr="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_struct_in6_addr" >&5
-echo "${ECHO_T}$ac_cv_have_struct_in6_addr" >&6
-if test "x$ac_cv_have_struct_in6_addr" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRUCT_IN6_ADDR 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for struct addrinfo" >&5
-echo $ECHO_N "checking for struct addrinfo... $ECHO_C" >&6
-if test "${ac_cv_have_struct_addrinfo+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netdb.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- struct addrinfo s; s.ai_flags = AI_PASSIVE; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_struct_addrinfo="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_struct_addrinfo="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_struct_addrinfo" >&5
-echo "${ECHO_T}$ac_cv_have_struct_addrinfo" >&6
-if test "x$ac_cv_have_struct_addrinfo" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRUCT_ADDRINFO 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for struct timeval" >&5
-echo $ECHO_N "checking for struct timeval... $ECHO_C" >&6
-if test "${ac_cv_have_struct_timeval+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
- #include <sys/time.h> 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- struct timeval tv; tv.tv_sec = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_struct_timeval="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_struct_timeval="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_struct_timeval" >&5
-echo "${ECHO_T}$ac_cv_have_struct_timeval" >&6
-if test "x$ac_cv_have_struct_timeval" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRUCT_TIMEVAL 1
-_ACEOF
-
-        have_struct_timeval=1
-fi
-
-echo "$as_me:$LINENO: checking for struct timespec" >&5
-echo $ECHO_N "checking for struct timespec... $ECHO_C" >&6
-if test "${ac_cv_type_struct_timespec+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-if ((struct timespec *) 0)
-  return 0;
-if (sizeof (struct timespec))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_struct_timespec=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_type_struct_timespec=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_struct_timespec" >&5
-echo "${ECHO_T}$ac_cv_type_struct_timespec" >&6
-if test $ac_cv_type_struct_timespec = yes; then
-  
-cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_STRUCT_TIMESPEC 1
-_ACEOF
-
-
-fi
-
-
-# We need int64_t or else certian parts of the compile will fail.
-if test "x$ac_cv_have_int64_t" = "xno" -a \
-        "x$ac_cv_sizeof_long_int" != "x8" -a \
-        "x$ac_cv_sizeof_long_long_int" = "x0" ; then
-        echo "OpenSSH requires int64_t support.  Contact your vendor or install"
-        echo "an alternative compiler (I.E., GCC) before continuing."
-        echo ""
-        exit 1;
-else
-        if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <stdio.h>
-#include <string.h>
-#ifdef HAVE_SNPRINTF
-main()
-{
-        char buf[50];
-        char expected_out[50];
-        int mazsize = 50 ;
-#if (SIZEOF_LONG_INT == 8)
-        long int num = 0x7fffffffffffffff;
-#else
-        long long num = 0x7fffffffffffffffll;
-#endif
-        strcpy(expected_out, "9223372036854775807");
-        snprintf(buf, mazsize, "%lld", num);
-        if(strcmp(buf, expected_out) != 0)
-                exit(1);
-        exit(0);
-}
-#else
-main() { exit(0); }
-#endif
-                
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   true 
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
- cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_SNPRINTF 1
-_ACEOF
- 
-        
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-
-
-# look for field 'ut_host' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_host
-        echo "$as_me:$LINENO: checking for ut_host field in utmp.h" >&5
-echo $ECHO_N "checking for ut_host field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_host" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_HOST_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_host' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_host
-        echo "$as_me:$LINENO: checking for ut_host field in utmpx.h" >&5
-echo $ECHO_N "checking for ut_host field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_host" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_HOST_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'syslen' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"syslen
-        echo "$as_me:$LINENO: checking for syslen field in utmpx.h" >&5
-echo $ECHO_N "checking for syslen field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "syslen" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SYSLEN_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_pid' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_pid
-        echo "$as_me:$LINENO: checking for ut_pid field in utmp.h" >&5
-echo $ECHO_N "checking for ut_pid field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_pid" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_PID_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_type' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_type
-        echo "$as_me:$LINENO: checking for ut_type field in utmp.h" >&5
-echo $ECHO_N "checking for ut_type field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_type" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_TYPE_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_type' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_type
-        echo "$as_me:$LINENO: checking for ut_type field in utmpx.h" >&5
-echo $ECHO_N "checking for ut_type field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_type" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_TYPE_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_tv' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_tv
-        echo "$as_me:$LINENO: checking for ut_tv field in utmp.h" >&5
-echo $ECHO_N "checking for ut_tv field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_tv" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_TV_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_id' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_id
-        echo "$as_me:$LINENO: checking for ut_id field in utmp.h" >&5
-echo $ECHO_N "checking for ut_id field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_id" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_ID_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_id' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_id
-        echo "$as_me:$LINENO: checking for ut_id field in utmpx.h" >&5
-echo $ECHO_N "checking for ut_id field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_id" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_ID_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_addr' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_addr
-        echo "$as_me:$LINENO: checking for ut_addr field in utmp.h" >&5
-echo $ECHO_N "checking for ut_addr field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_addr" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_ADDR_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_addr' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_addr
-        echo "$as_me:$LINENO: checking for ut_addr field in utmpx.h" >&5
-echo $ECHO_N "checking for ut_addr field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_addr" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_ADDR_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_addr_v6' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_addr_v6
-        echo "$as_me:$LINENO: checking for ut_addr_v6 field in utmp.h" >&5
-echo $ECHO_N "checking for ut_addr_v6 field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_addr_v6" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_ADDR_V6_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_addr_v6' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_addr_v6
-        echo "$as_me:$LINENO: checking for ut_addr_v6 field in utmpx.h" >&5
-echo $ECHO_N "checking for ut_addr_v6 field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_addr_v6" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_ADDR_V6_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_exit' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_exit
-        echo "$as_me:$LINENO: checking for ut_exit field in utmp.h" >&5
-echo $ECHO_N "checking for ut_exit field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_exit" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_EXIT_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_time' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_time
-        echo "$as_me:$LINENO: checking for ut_time field in utmp.h" >&5
-echo $ECHO_N "checking for ut_time field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_time" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_TIME_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_time' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_time
-        echo "$as_me:$LINENO: checking for ut_time field in utmpx.h" >&5
-echo $ECHO_N "checking for ut_time field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_time" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_TIME_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_tv' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_tv
-        echo "$as_me:$LINENO: checking for ut_tv field in utmpx.h" >&5
-echo $ECHO_N "checking for ut_tv field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "ut_tv" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_TV_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-echo "$as_me:$LINENO: checking for struct stat.st_blksize" >&5
-echo $ECHO_N "checking for struct stat.st_blksize... $ECHO_C" >&6
-if test "${ac_cv_member_struct_stat_st_blksize+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-static struct stat ac_aggr;
-if (ac_aggr.st_blksize)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_stat_st_blksize=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_member_struct_stat_st_blksize=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_blksize" >&5
-echo "${ECHO_T}$ac_cv_member_struct_stat_st_blksize" >&6
-if test $ac_cv_member_struct_stat_st_blksize = yes; then
-  
-cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_STRUCT_STAT_ST_BLKSIZE 1
-_ACEOF
-
-
-fi
-
-
-echo "$as_me:$LINENO: checking for ss_family field in struct sockaddr_storage" >&5
-echo $ECHO_N "checking for ss_family field in struct sockaddr_storage... $ECHO_C" >&6
-if test "${ac_cv_have_ss_family_in_struct_ss+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <sys/socket.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- struct sockaddr_storage s; s.ss_family = 1; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_ss_family_in_struct_ss="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_ss_family_in_struct_ss="no" 
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_ss_family_in_struct_ss" >&5
-echo "${ECHO_T}$ac_cv_have_ss_family_in_struct_ss" >&6
-if test "x$ac_cv_have_ss_family_in_struct_ss" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SS_FAMILY_IN_SS 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for __ss_family field in struct sockaddr_storage" >&5
-echo $ECHO_N "checking for __ss_family field in struct sockaddr_storage... $ECHO_C" >&6
-if test "${ac_cv_have___ss_family_in_struct_ss+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <sys/socket.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- struct sockaddr_storage s; s.__ss_family = 1; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have___ss_family_in_struct_ss="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have___ss_family_in_struct_ss="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have___ss_family_in_struct_ss" >&5
-echo "${ECHO_T}$ac_cv_have___ss_family_in_struct_ss" >&6
-if test "x$ac_cv_have___ss_family_in_struct_ss" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE___SS_FAMILY_IN_SS 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for pw_class field in struct passwd" >&5
-echo $ECHO_N "checking for pw_class field in struct passwd... $ECHO_C" >&6
-if test "${ac_cv_have_pw_class_in_struct_passwd+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <pwd.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- struct passwd p; p.pw_class = 0; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_pw_class_in_struct_passwd="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_pw_class_in_struct_passwd="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_pw_class_in_struct_passwd" >&5
-echo "${ECHO_T}$ac_cv_have_pw_class_in_struct_passwd" >&6
-if test "x$ac_cv_have_pw_class_in_struct_passwd" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_PW_CLASS_IN_PASSWD 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for pw_expire field in struct passwd" >&5
-echo $ECHO_N "checking for pw_expire field in struct passwd... $ECHO_C" >&6
-if test "${ac_cv_have_pw_expire_in_struct_passwd+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <pwd.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- struct passwd p; p.pw_expire = 0; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_pw_expire_in_struct_passwd="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_pw_expire_in_struct_passwd="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_pw_expire_in_struct_passwd" >&5
-echo "${ECHO_T}$ac_cv_have_pw_expire_in_struct_passwd" >&6
-if test "x$ac_cv_have_pw_expire_in_struct_passwd" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_PW_EXPIRE_IN_PASSWD 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for pw_change field in struct passwd" >&5
-echo $ECHO_N "checking for pw_change field in struct passwd... $ECHO_C" >&6
-if test "${ac_cv_have_pw_change_in_struct_passwd+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <pwd.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- struct passwd p; p.pw_change = 0; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_pw_change_in_struct_passwd="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_pw_change_in_struct_passwd="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_pw_change_in_struct_passwd" >&5
-echo "${ECHO_T}$ac_cv_have_pw_change_in_struct_passwd" >&6
-if test "x$ac_cv_have_pw_change_in_struct_passwd" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_PW_CHANGE_IN_PASSWD 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for msg_accrights field in struct msghdr" >&5
-echo $ECHO_N "checking for msg_accrights field in struct msghdr... $ECHO_C" >&6
-if test "${ac_cv_have_accrights_in_msghdr+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/uio.h>
-int main() {
-#ifdef msg_accrights
-exit(1);
-#endif
-struct msghdr m;
-m.msg_accrights = 0;
-exit(0);
-}
-                
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_accrights_in_msghdr="yes" 
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
- ac_cv_have_accrights_in_msghdr="no" 
-        
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_accrights_in_msghdr" >&5
-echo "${ECHO_T}$ac_cv_have_accrights_in_msghdr" >&6
-if test "x$ac_cv_have_accrights_in_msghdr" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_ACCRIGHTS_IN_MSGHDR 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for msg_control field in struct msghdr" >&5
-echo $ECHO_N "checking for msg_control field in struct msghdr... $ECHO_C" >&6
-if test "${ac_cv_have_control_in_msghdr+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/uio.h>
-int main() {
-#ifdef msg_control
-exit(1);
-#endif
-struct msghdr m;
-m.msg_control = 0;
-exit(0);
-}
-                
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_control_in_msghdr="yes" 
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
- ac_cv_have_control_in_msghdr="no" 
-        
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_control_in_msghdr" >&5
-echo "${ECHO_T}$ac_cv_have_control_in_msghdr" >&6
-if test "x$ac_cv_have_control_in_msghdr" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_CONTROL_IN_MSGHDR 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking if libc defines __progname" >&5
-echo $ECHO_N "checking if libc defines __progname... $ECHO_C" >&6
-if test "${ac_cv_libc_defines___progname+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- extern char *__progname; printf("%s", __progname); 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_libc_defines___progname="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_libc_defines___progname="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_libc_defines___progname" >&5
-echo "${ECHO_T}$ac_cv_libc_defines___progname" >&6
-if test "x$ac_cv_libc_defines___progname" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE___PROGNAME 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking whether $CC implements __FUNCTION__" >&5
-echo $ECHO_N "checking whether $CC implements __FUNCTION__... $ECHO_C" >&6
-if test "${ac_cv_cc_implements___FUNCTION__+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <stdio.h>
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- printf("%s", __FUNCTION__); 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_cc_implements___FUNCTION__="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_cc_implements___FUNCTION__="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_cc_implements___FUNCTION__" >&5
-echo "${ECHO_T}$ac_cv_cc_implements___FUNCTION__" >&6
-if test "x$ac_cv_cc_implements___FUNCTION__" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE___FUNCTION__ 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking whether $CC implements __func__" >&5
-echo $ECHO_N "checking whether $CC implements __func__... $ECHO_C" >&6
-if test "${ac_cv_cc_implements___func__+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <stdio.h>
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- printf("%s", __func__); 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_cc_implements___func__="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_cc_implements___func__="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_cc_implements___func__" >&5
-echo "${ECHO_T}$ac_cv_cc_implements___func__" >&6
-if test "x$ac_cv_cc_implements___func__" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE___func__ 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking whether getopt has optreset support" >&5
-echo $ECHO_N "checking whether getopt has optreset support... $ECHO_C" >&6
-if test "${ac_cv_have_getopt_optreset+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <getopt.h>
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- extern int optreset; optreset = 0; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_getopt_optreset="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_have_getopt_optreset="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_getopt_optreset" >&5
-echo "${ECHO_T}$ac_cv_have_getopt_optreset" >&6
-if test "x$ac_cv_have_getopt_optreset" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_GETOPT_OPTRESET 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking if libc defines sys_errlist" >&5
-echo $ECHO_N "checking if libc defines sys_errlist... $ECHO_C" >&6
-if test "${ac_cv_libc_defines_sys_errlist+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- extern const char *const sys_errlist[]; printf("%s", sys_errlist[0]);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_libc_defines_sys_errlist="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_libc_defines_sys_errlist="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_libc_defines_sys_errlist" >&5
-echo "${ECHO_T}$ac_cv_libc_defines_sys_errlist" >&6
-if test "x$ac_cv_libc_defines_sys_errlist" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SYS_ERRLIST 1
-_ACEOF
-
-fi
-
-
-echo "$as_me:$LINENO: checking if libc defines sys_nerr" >&5
-echo $ECHO_N "checking if libc defines sys_nerr... $ECHO_C" >&6
-if test "${ac_cv_libc_defines_sys_nerr+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- extern int sys_nerr; printf("%i", sys_nerr);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_libc_defines_sys_nerr="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- ac_cv_libc_defines_sys_nerr="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_libc_defines_sys_nerr" >&5
-echo "${ECHO_T}$ac_cv_libc_defines_sys_nerr" >&6
-if test "x$ac_cv_libc_defines_sys_nerr" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SYS_NERR 1
-_ACEOF
-
-fi
-
-SCARD_MSG="no" 
-
-# Check whether user wants sectok support
-
-# Check whether --with-sectok or --without-sectok was given.
-if test "${with_sectok+set}" = set; then
-  withval="$with_sectok"
-  
-                if test "x$withval" != "xno" ; then
-                        if test "x$withval" != "xyes" ; then
-                                CPPFLAGS="$CPPFLAGS -I${withval}"
-                                LDFLAGS="$LDFLAGS -L${withval}"
-                                if test ! -z "$need_dash_r" ; then
-                                        LDFLAGS="$LDFLAGS -R${withval}"
-                                fi
-                                if test ! -z "$blibpath" ; then
-                                        blibpath="$blibpath:${withval}"
-                                fi
-                        fi
-                        
-for ac_header in sectok.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-@%:@include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-
-done
-
-                        if test "$ac_cv_header_sectok_h" != yes; then
-                                { { echo "$as_me:$LINENO: error: Can't find sectok.h" >&5
-echo "$as_me: error: Can't find sectok.h" >&2;}
-   { (exit 1); exit 1; }; }
-                        fi
-                        
-echo "$as_me:$LINENO: checking for sectok_open in -lsectok" >&5
-echo $ECHO_N "checking for sectok_open in -lsectok... $ECHO_C" >&6
-if test "${ac_cv_lib_sectok_sectok_open+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsectok  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char sectok_open ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-sectok_open ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_sectok_sectok_open=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_sectok_sectok_open=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_sectok_sectok_open" >&5
-echo "${ECHO_T}$ac_cv_lib_sectok_sectok_open" >&6
-if test $ac_cv_lib_sectok_sectok_open = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBSECTOK 1
-_ACEOF
-
-  LIBS="-lsectok $LIBS"
-
-fi
-
-                        if test "$ac_cv_lib_sectok_sectok_open" != yes; then
-                                { { echo "$as_me:$LINENO: error: Can't find libsectok" >&5
-echo "$as_me: error: Can't find libsectok" >&2;}
-   { (exit 1); exit 1; }; }
-                        fi
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define SMARTCARD 1
-_ACEOF
-
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_SECTOK 1
-_ACEOF
-
-                        SCARD_MSG="yes, using sectok" 
-                fi
-        
-
-fi; 
-
-# Check whether user wants OpenSC support
-
-# Check whether --with-opensc or --without-opensc was given.
-if test "${with_opensc+set}" = set; then
-  withval="$with_opensc"
-  opensc_config_prefix="$withval"
-else
-  opensc_config_prefix=""
-fi; 
-if test x$opensc_config_prefix != x ; then
-  OPENSC_CONFIG=$opensc_config_prefix/bin/opensc-config
-  # Extract the first word of "opensc-config", so it can be a program name with args.
-set dummy opensc-config; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_OPENSC_CONFIG+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $OPENSC_CONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_OPENSC_CONFIG="$OPENSC_CONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_OPENSC_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_path_OPENSC_CONFIG" && ac_cv_path_OPENSC_CONFIG="no"
-  ;;
-esac
-fi
-OPENSC_CONFIG=$ac_cv_path_OPENSC_CONFIG
-
-if test -n "$OPENSC_CONFIG"; then
-  echo "$as_me:$LINENO: result: $OPENSC_CONFIG" >&5
-echo "${ECHO_T}$OPENSC_CONFIG" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  if test "$OPENSC_CONFIG" != "no"; then
-    LIBOPENSC_CFLAGS=`$OPENSC_CONFIG --cflags`
-    LIBOPENSC_LIBS=`$OPENSC_CONFIG --libs`
-    CPPFLAGS="$CPPFLAGS $LIBOPENSC_CFLAGS"
-    LDFLAGS="$LDFLAGS $LIBOPENSC_LIBS"
-    cat >>confdefs.h <<\_ACEOF
-@%:@define SMARTCARD 1
-_ACEOF
-
-    cat >>confdefs.h <<\_ACEOF
-@%:@define USE_OPENSC 1
-_ACEOF
-
-    SCARD_MSG="yes, using OpenSC" 
-  fi
-fi
-
-# Check whether user wants Kerberos 5 support
-KRB5_MSG="no" 
-
-# Check whether --with-kerberos5 or --without-kerberos5 was given.
-if test "${with_kerberos5+set}" = set; then
-  withval="$with_kerberos5"
-  
-                if test "x$withval" != "xno" ; then
-                        if test "x$withval" = "xyes" ; then
-                                KRB5ROOT="/usr/local"
-                        else
-                                KRB5ROOT=${withval}
-                        fi
-                        CPPFLAGS="$CPPFLAGS -I${KRB5ROOT}/include"
-                        LDFLAGS="$LDFLAGS -L${KRB5ROOT}/lib"
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define KRB5 1
-_ACEOF
-
-                        KRB5_MSG="yes"
-                        echo "$as_me:$LINENO: checking whether we are using Heimdal" >&5
-echo $ECHO_N "checking whether we are using Heimdal... $ECHO_C" >&6
-                        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
- #include <krb5.h> 
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- char *tmp = heimdal_version; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                                         cat >>confdefs.h <<\_ACEOF
-@%:@define HEIMDAL 1
-_ACEOF
-
-                                         K5LIBS="-lkrb5 -ldes -lcom_err -lasn1 -lroken"
-                                       
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                                         K5LIBS="-lkrb5 -lk5crypto -lcom_err"
-                                       
-                        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-                        if test ! -z "$need_dash_r" ; then
-                                LDFLAGS="$LDFLAGS -R${KRB5ROOT}/lib"
-                        fi
-                        if test ! -z "$blibpath" ; then
-                                blibpath="$blibpath:${KRB5ROOT}/lib"
-                        fi
-                        
-echo "$as_me:$LINENO: checking for dn_expand in -lresolv" >&5
-echo $ECHO_N "checking for dn_expand in -lresolv... $ECHO_C" >&6
-if test "${ac_cv_lib_resolv_dn_expand+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lresolv  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dn_expand ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-dn_expand ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_resolv_dn_expand=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_resolv_dn_expand=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_dn_expand" >&5
-echo "${ECHO_T}$ac_cv_lib_resolv_dn_expand" >&6
-if test $ac_cv_lib_resolv_dn_expand = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBRESOLV 1
-_ACEOF
-
-  LIBS="-lresolv $LIBS"
-
-fi
-
-
-                        KRB5=yes
-                fi
-        
-
-fi; 
-# Check whether user wants Kerberos 4 support
-KRB4_MSG="no" 
-
-# Check whether --with-kerberos4 or --without-kerberos4 was given.
-if test "${with_kerberos4+set}" = set; then
-  withval="$with_kerberos4"
-  
-                if test "x$withval" != "xno" ; then
-                        if test "x$withval" != "xyes" ; then
-                                CPPFLAGS="$CPPFLAGS -I${withval}/include"
-                                LDFLAGS="$LDFLAGS -L${withval}/lib"
-                                if test ! -z "$need_dash_r" ; then
-                                        LDFLAGS="$LDFLAGS -R${withval}/lib"
-                                fi
-                                if test ! -z "$blibpath" ; then
-                                        blibpath="$blibpath:${withval}/lib"
-                                fi
-                        else
-                                if test -d /usr/include/kerberosIV ; then
-                                        CPPFLAGS="$CPPFLAGS -I/usr/include/kerberosIV"
-                                fi
-                        fi
-
-                        
-for ac_header in krb.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-$ac_includes_default
-@%:@include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-@%:@include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  egrep -v '^ *\+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-
-done
-
-                        if test "$ac_cv_header_krb_h" != yes; then
-                                { echo "$as_me:$LINENO: WARNING: Cannot find krb.h, build may fail" >&5
-echo "$as_me: WARNING: Cannot find krb.h, build may fail" >&2;}
-                        fi
-                        
-echo "$as_me:$LINENO: checking for main in -lkrb" >&5
-echo $ECHO_N "checking for main in -lkrb... $ECHO_C" >&6
-if test "${ac_cv_lib_krb_main+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lkrb  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-main ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_krb_main=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_krb_main=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_krb_main" >&5
-echo "${ECHO_T}$ac_cv_lib_krb_main" >&6
-if test $ac_cv_lib_krb_main = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBKRB 1
-_ACEOF
-
-  LIBS="-lkrb $LIBS"
-
-fi
-
-                        if test "$ac_cv_lib_krb_main" != yes; then
-                                
-echo "$as_me:$LINENO: checking for main in -lkrb4" >&5
-echo $ECHO_N "checking for main in -lkrb4... $ECHO_C" >&6
-if test "${ac_cv_lib_krb4_main+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lkrb4  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-main ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_krb4_main=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_krb4_main=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_krb4_main" >&5
-echo "${ECHO_T}$ac_cv_lib_krb4_main" >&6
-if test $ac_cv_lib_krb4_main = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBKRB4 1
-_ACEOF
-
-  LIBS="-lkrb4 $LIBS"
-
-fi
-
-                                if test "$ac_cv_lib_krb4_main" != yes; then
-                                        { echo "$as_me:$LINENO: WARNING: Cannot find libkrb nor libkrb4, build may fail" >&5
-echo "$as_me: WARNING: Cannot find libkrb nor libkrb4, build may fail" >&2;}
-                                else
-                                        KLIBS="-lkrb4"
-                                fi
-                        else
-                                KLIBS="-lkrb"
-                        fi
-                        
-echo "$as_me:$LINENO: checking for des_cbc_encrypt in -ldes" >&5
-echo $ECHO_N "checking for des_cbc_encrypt in -ldes... $ECHO_C" >&6
-if test "${ac_cv_lib_des_des_cbc_encrypt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldes  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char des_cbc_encrypt ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-des_cbc_encrypt ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_des_des_cbc_encrypt=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_des_des_cbc_encrypt=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_des_des_cbc_encrypt" >&5
-echo "${ECHO_T}$ac_cv_lib_des_des_cbc_encrypt" >&6
-if test $ac_cv_lib_des_des_cbc_encrypt = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBDES 1
-_ACEOF
-
-  LIBS="-ldes $LIBS"
-
-fi
-
-                        if test "$ac_cv_lib_des_des_cbc_encrypt" != yes; then
-                                
-echo "$as_me:$LINENO: checking for des_cbc_encrypt in -ldes425" >&5
-echo $ECHO_N "checking for des_cbc_encrypt in -ldes425... $ECHO_C" >&6
-if test "${ac_cv_lib_des425_des_cbc_encrypt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldes425  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char des_cbc_encrypt ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-des_cbc_encrypt ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_des425_des_cbc_encrypt=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_des425_des_cbc_encrypt=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_des425_des_cbc_encrypt" >&5
-echo "${ECHO_T}$ac_cv_lib_des425_des_cbc_encrypt" >&6
-if test $ac_cv_lib_des425_des_cbc_encrypt = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBDES425 1
-_ACEOF
-
-  LIBS="-ldes425 $LIBS"
-
-fi
-
-                                if test "$ac_cv_lib_des425_des_cbc_encrypt" != yes; then
-                                        { echo "$as_me:$LINENO: WARNING: Cannot find libdes nor libdes425, build may fail" >&5
-echo "$as_me: WARNING: Cannot find libdes nor libdes425, build may fail" >&2;}
-                                else
-                                        KLIBS="-ldes425"
-                                fi
-                        else
-                                KLIBS="-ldes"
-                        fi
-                        
-echo "$as_me:$LINENO: checking for dn_expand in -lresolv" >&5
-echo $ECHO_N "checking for dn_expand in -lresolv... $ECHO_C" >&6
-if test "${ac_cv_lib_resolv_dn_expand+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lresolv  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dn_expand ();
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
-dn_expand ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_resolv_dn_expand=yes
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-ac_cv_lib_resolv_dn_expand=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_dn_expand" >&5
-echo "${ECHO_T}$ac_cv_lib_resolv_dn_expand" >&6
-if test $ac_cv_lib_resolv_dn_expand = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBRESOLV 1
-_ACEOF
-
-  LIBS="-lresolv $LIBS"
-
-fi
-
-                        KRB4=yes
-                        KRB4_MSG="yes" 
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define KRB4 1
-_ACEOF
-
-                fi
-        
-
-fi; 
-
-# Check whether user wants AFS support
-AFS_MSG="no" 
-
-# Check whether --with-afs or --without-afs was given.
-if test "${with_afs+set}" = set; then
-  withval="$with_afs"
-  
-                if test "x$withval" != "xno" ; then
-
-                        if test "x$withval" != "xyes" ; then
-                                CPPFLAGS="$CPPFLAGS -I${withval}/include"
-                                LDFLAGS="$LDFLAGS -L${withval}/lib"
-                        fi
-
-                        if test -z "$KRB4" ; then
-                                { echo "$as_me:$LINENO: WARNING: AFS requires Kerberos IV support, build may fail" >&5
-echo "$as_me: WARNING: AFS requires Kerberos IV support, build may fail" >&2;}
-                        fi
-
-                        LIBS="-lkafs $LIBS"
-                        if test ! -z "$AFS_LIBS" ; then
-                                LIBS="$LIBS $AFS_LIBS"
-                        fi
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define AFS 1
-_ACEOF
-
-                        AFS_MSG="yes" 
-                fi
-        
-
-fi; 
-LIBS="$LIBS $KLIBS $K5LIBS"
-
-# Looking for programs, paths and files
-
-PRIVSEP_PATH=/var/empty
-
-# Check whether --with-privsep-path or --without-privsep-path was given.
-if test "${with_privsep_path+set}" = set; then
-  withval="$with_privsep_path"
-  
-                if test "x$withval" != "$no" ; then
-                        PRIVSEP_PATH=$withval
-                fi
-        
-
-fi; 
-
-
-
-# Check whether --with-xauth or --without-xauth was given.
-if test "${with_xauth+set}" = set; then
-  withval="$with_xauth"
-  
-                if test "x$withval" != "xno" ; then
-                        xauth_path=$withval
-                fi
-        
-else
-  
-                TestPath="$PATH"
-                TestPath="${TestPath}${PATH_SEPARATOR}/usr/X/bin"
-                TestPath="${TestPath}${PATH_SEPARATOR}/usr/bin/X11"
-                TestPath="${TestPath}${PATH_SEPARATOR}/usr/X11R6/bin"
-                TestPath="${TestPath}${PATH_SEPARATOR}/usr/openwin/bin"
-                # Extract the first word of "xauth", so it can be a program name with args.
-set dummy xauth; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_xauth_path+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $xauth_path in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_xauth_path="$xauth_path" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $TestPath
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_xauth_path="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-xauth_path=$ac_cv_path_xauth_path
-
-if test -n "$xauth_path"; then
-  echo "$as_me:$LINENO: result: $xauth_path" >&5
-echo "${ECHO_T}$xauth_path" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-                if (test ! -z "$xauth_path" && test -x "/usr/openwin/bin/xauth") ; then
-                        xauth_path="/usr/openwin/bin/xauth"
-                fi
-        
-
-fi; 
-
-STRIP_OPT=-s
-# Check whether --enable-strip or --disable-strip was given.
-if test "${enable_strip+set}" = set; then
-  enableval="$enable_strip"
-  
-                if test "x$enableval" = "xno" ; then
-                        STRIP_OPT=
-                fi
-        
-
-fi; 
-
-
-if test -z "$xauth_path" ; then
-        XAUTH_PATH="undefined"
-        
-else
-        cat >>confdefs.h <<_ACEOF
-@%:@define XAUTH_PATH "$xauth_path"
-_ACEOF
-
-        XAUTH_PATH=$xauth_path
-        
-fi
-
-# Check for mail directory (last resort if we cannot get it from headers)
-if test ! -z "$MAIL" ; then
-        maildir=`dirname $MAIL`
-        cat >>confdefs.h <<_ACEOF
-@%:@define MAIL_DIRECTORY "$maildir"
-_ACEOF
-
-fi
-
-if test -z "$no_dev_ptmx" ; then
-        if test "x$disable_ptmx_check" != "xyes" ; then
-                echo "$as_me:$LINENO: checking for \"/dev/ptmx\"" >&5
-echo $ECHO_N "checking for \"/dev/ptmx\"... $ECHO_C" >&6
-if test "${ac_cv_file___dev_ptmx_+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  test "$cross_compiling" = yes &&
-  { { echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5
-echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-if test -r ""/dev/ptmx""; then
-  ac_cv_file___dev_ptmx_=yes
-else
-  ac_cv_file___dev_ptmx_=no
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_file___dev_ptmx_" >&5
-echo "${ECHO_T}$ac_cv_file___dev_ptmx_" >&6
-if test $ac_cv_file___dev_ptmx_ = yes; then
-  
-                                cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_DEV_PTMX 1
-_ACEOF
-
-                                have_dev_ptmx=1
-                        
-                
-fi
-
-        fi
-fi
-echo "$as_me:$LINENO: checking for \"/dev/ptc\"" >&5
-echo $ECHO_N "checking for \"/dev/ptc\"... $ECHO_C" >&6
-if test "${ac_cv_file___dev_ptc_+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  test "$cross_compiling" = yes &&
-  { { echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5
-echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-if test -r ""/dev/ptc""; then
-  ac_cv_file___dev_ptc_=yes
-else
-  ac_cv_file___dev_ptc_=no
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_file___dev_ptc_" >&5
-echo "${ECHO_T}$ac_cv_file___dev_ptc_" >&6
-if test $ac_cv_file___dev_ptc_ = yes; then
-  
-                cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_DEV_PTS_AND_PTC 1
-_ACEOF
-
-                have_dev_ptc=1
-        
-
-fi
-
-
-# Options from here on. Some of these are preset by platform above
-
-# Check whether --with-mantype or --without-mantype was given.
-if test "${with_mantype+set}" = set; then
-  withval="$with_mantype"
-  
-                case "$withval" in
-                man|cat|doc)
-                        MANTYPE=$withval
-                        ;;
-                *)
-                        { { echo "$as_me:$LINENO: error: invalid man type: $withval" >&5
-echo "$as_me: error: invalid man type: $withval" >&2;}
-   { (exit 1); exit 1; }; }
-                        ;;
-                esac
-        
-
-fi; 
-if test -z "$MANTYPE"; then
-        TestPath="/usr/bin${PATH_SEPARATOR}/usr/ucb"
-        for ac_prog in nroff awf
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_NROFF+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $NROFF in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_NROFF="$NROFF" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $TestPath
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_NROFF="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-NROFF=$ac_cv_path_NROFF
-
-if test -n "$NROFF"; then
-  echo "$as_me:$LINENO: result: $NROFF" >&5
-echo "${ECHO_T}$NROFF" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$NROFF" && break
-done
-test -n "$NROFF" || NROFF="/bin/false"
-
-        if ${NROFF} -mdoc ${srcdir}/ssh.1 >/dev/null 2>&1; then
-                MANTYPE=doc
-        elif ${NROFF} -man ${srcdir}/ssh.1 >/dev/null 2>&1; then
-                MANTYPE=man
-        else
-                MANTYPE=cat
-        fi
-fi
-
-if test "$MANTYPE" = "doc"; then
-        mansubdir=man;
-else
-        mansubdir=$MANTYPE;
-fi
-
-
-# Check whether to enable MD5 passwords
-MD5_MSG="no" 
-
-# Check whether --with-md5-passwords or --without-md5-passwords was given.
-if test "${with_md5_passwords+set}" = set; then
-  withval="$with_md5_passwords"
-  
-                if test "x$withval" != "xno" ; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_MD5_PASSWORDS 1
-_ACEOF
-
-                        MD5_MSG="yes" 
-                fi
-        
-
-fi; 
-
-# Whether to disable shadow password support
-
-# Check whether --with-shadow or --without-shadow was given.
-if test "${with_shadow+set}" = set; then
-  withval="$with_shadow"
-  
-                if test "x$withval" = "xno" ; then      
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_SHADOW 1
-_ACEOF
-
-                        disable_shadow=yes
-                fi
-        
-
-fi; 
-
-if test -z "$disable_shadow" ; then
-        echo "$as_me:$LINENO: checking if the systems has expire shadow information" >&5
-echo $ECHO_N "checking if the systems has expire shadow information... $ECHO_C" >&6
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <shadow.h>
-        struct spwd sp;
-        
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- sp.sp_expire = sp.sp_lstchg = sp.sp_inact = 0; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   sp_expire_available=yes 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-        if test "x$sp_expire_available" = "xyes" ; then
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                cat >>confdefs.h <<\_ACEOF
-@%:@define HAS_SHADOW_EXPIRE 1
-_ACEOF
-
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-fi
-
-# Use ip address instead of hostname in $DISPLAY
-if test ! -z "$IPADDR_IN_DISPLAY" ; then
-        DISPLAY_HACK_MSG="yes"
-        cat >>confdefs.h <<\_ACEOF
-@%:@define IPADDR_IN_DISPLAY 1
-_ACEOF
-
-else
-        DISPLAY_HACK_MSG="no" 
-        
-# Check whether --with-ipaddr-display or --without-ipaddr-display was given.
-if test "${with_ipaddr_display+set}" = set; then
-  withval="$with_ipaddr_display"
-  
-                        if test "x$withval" != "xno" ; then     
-                                cat >>confdefs.h <<\_ACEOF
-@%:@define IPADDR_IN_DISPLAY 1
-_ACEOF
-
-                                DISPLAY_HACK_MSG="yes" 
-                        fi
-                
-        
-fi; 
-fi
-
-if test $ac_cv_func_login_getcapbool = "yes" -a \
-        $ac_cv_header_login_cap_h = "yes" ; then
-        USES_LOGIN_CONF=yes
-fi
-# Whether to mess with the default path
-SERVER_PATH_MSG="(default)" 
-
-# Check whether --with-default-path or --without-default-path was given.
-if test "${with_default_path+set}" = set; then
-  withval="$with_default_path"
-  
-                if test "$USES_LOGIN_CONF" = "yes" ; then
-                        { echo "$as_me:$LINENO: WARNING: 
---with-default-path=PATH has no effect on this system.
-Edit /etc/login.conf instead." >&5
-echo "$as_me: WARNING: 
---with-default-path=PATH has no effect on this system.
-Edit /etc/login.conf instead." >&2;}
-                elif test "x$withval" != "xno" ; then   
-                        user_path="$withval"
-                        SERVER_PATH_MSG="$withval" 
-                fi
-        
-else
-   if test "$USES_LOGIN_CONF" = "yes" ; then
-        { echo "$as_me:$LINENO: WARNING: Make sure the path to scp is in /etc/login.conf" >&5
-echo "$as_me: WARNING: Make sure the path to scp is in /etc/login.conf" >&2;}
-        else
-        if test "$cross_compiling" = yes; then
-   user_path="/usr/bin:/bin:/usr/sbin:/sbin" 
-        
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-/* find out what STDPATH is */
-#include <stdio.h>
-#ifdef HAVE_PATHS_H
-# include <paths.h>
-#endif
-#ifndef _PATH_STDPATH
-# ifdef _PATH_USERPATH  /* Irix */
-#  define _PATH_STDPATH _PATH_USERPATH
-# else
-#  define _PATH_STDPATH "/usr/bin:/bin:/usr/sbin:/sbin"
-# endif
-#endif
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#define DATA "conftest.stdpath"
-
-main()
-{
-        FILE *fd;
-        int rc;
-        
-        fd = fopen(DATA,"w");
-        if(fd == NULL)
-                exit(1);
-        
-        if ((rc = fprintf(fd,"%s", _PATH_STDPATH)) < 0)
-                exit(1);
-
-        exit(0);
-}
-                
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   user_path=`cat conftest.stdpath` 
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-( exit $ac_status )
- user_path="/usr/bin:/bin:/usr/sbin:/sbin" 
-fi
-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-# make sure $bindir is in USER_PATH so scp will work
-                t_bindir=`eval echo ${bindir}`
-                case $t_bindir in
-                        NONE/*) t_bindir=`echo $t_bindir | sed "s~NONE~$prefix~"` ;;
-                esac
-                case $t_bindir in
-                        NONE/*) t_bindir=`echo $t_bindir | sed "s~NONE~$ac_default_prefix~"` ;;
-                esac
-                echo $user_path | grep ":$t_bindir"  > /dev/null 2>&1
-                if test $? -ne 0  ; then
-                        echo $user_path | grep "^$t_bindir"  > /dev/null 2>&1
-                        if test $? -ne 0  ; then
-                                user_path=$user_path:$t_bindir
-                                echo "$as_me:$LINENO: result: Adding $t_bindir to USER_PATH so scp will work" >&5
-echo "${ECHO_T}Adding $t_bindir to USER_PATH so scp will work" >&6
-                        fi
-                fi
-        fi 
-
-fi; 
-if test "$USES_LOGIN_CONF" != "yes" ; then
-        cat >>confdefs.h <<_ACEOF
-@%:@define USER_PATH "$user_path"
-_ACEOF
-
-        
-fi
-
-# Set superuser path separately to user path
-
-# Check whether --with-superuser-path or --without-superuser-path was given.
-if test "${with_superuser_path+set}" = set; then
-  withval="$with_superuser_path"
-  
-                if test "x$withval" != "xno" ; then
-                        cat >>confdefs.h <<_ACEOF
-@%:@define SUPERUSER_PATH "$withval"
-_ACEOF
-
-                        superuser_path=$withval
-                fi
-        
-
-fi; 
-
-
-# Whether to force IPv4 by default (needed on broken glibc Linux)
-IPV4_HACK_MSG="no" 
-
-# Check whether --with-ipv4-default or --without-ipv4-default was given.
-if test "${with_ipv4_default+set}" = set; then
-  withval="$with_ipv4_default"
-  
-                if test "x$withval" != "xno" ; then     
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define IPV4_DEFAULT 1
-_ACEOF
-
-                        IPV4_HACK_MSG="yes" 
-                fi
-        
-
-fi; 
-
-echo "$as_me:$LINENO: checking if we need to convert IPv4 in IPv6-mapped addresses" >&5
-echo $ECHO_N "checking if we need to convert IPv4 in IPv6-mapped addresses... $ECHO_C" >&6
-IPV4_IN6_HACK_MSG="no" 
-
-# Check whether --with-4in6 or --without-4in6 was given.
-if test "${with_4in6+set}" = set; then
-  withval="$with_4in6"
-  
-                if test "x$withval" != "xno" ; then
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define IPV4_IN_IPV6 1
-_ACEOF
-
-                        IPV4_IN6_HACK_MSG="yes" 
-                else
-                        echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                fi
-        
-else
-  
-                if test "x$inet6_default_4in6" = "xyes"; then
-                        echo "$as_me:$LINENO: result: yes (default)" >&5
-echo "${ECHO_T}yes (default)" >&6
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define IPV4_IN_IPV6 1
-_ACEOF
-
-                        IPV4_IN6_HACK_MSG="yes" 
-                else
-                        echo "$as_me:$LINENO: result: no (default)" >&5
-echo "${ECHO_T}no (default)" >&6
-                fi
-        
-
-fi; 
-
-# Whether to enable BSD auth support
-BSD_AUTH_MSG=no
-
-# Check whether --with-bsd-auth or --without-bsd-auth was given.
-if test "${with_bsd_auth+set}" = set; then
-  withval="$with_bsd_auth"
-  
-                if test "x$withval" != "xno" ; then     
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define BSD_AUTH 1
-_ACEOF
-
-                        BSD_AUTH_MSG=yes
-                fi
-        
-
-fi; 
-
-# Where to place sshd.pid
-piddir=/var/run
-# make sure the directory exists
-if test ! -d $piddir ; then     
-        piddir=`eval echo ${sysconfdir}`
-        case $piddir in
-                NONE/*) piddir=`echo $piddir | sed "s~NONE~$ac_default_prefix~"` ;;
-        esac
-fi
-
-
-# Check whether --with-pid-dir or --without-pid-dir was given.
-if test "${with_pid_dir+set}" = set; then
-  withval="$with_pid_dir"
-  
-                if test "x$withval" != "xno" ; then     
-                        piddir=$withval
-                        if test ! -d $piddir ; then     
-                        { echo "$as_me:$LINENO: WARNING: ** no $piddir directory on this system **" >&5
-echo "$as_me: WARNING: ** no $piddir directory on this system **" >&2;}
-                        fi
-                fi
-        
-
-fi; 
-
-cat >>confdefs.h <<_ACEOF
-@%:@define _PATH_SSH_PIDDIR "$piddir"
-_ACEOF
-
-
-
-# Check whether --enable-lastlog or --disable-lastlog was given.
-if test "${enable_lastlog+set}" = set; then
-  enableval="$enable_lastlog"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_LASTLOG 1
-_ACEOF
- 
-
-fi; 
-# Check whether --enable-utmp or --disable-utmp was given.
-if test "${enable_utmp+set}" = set; then
-  enableval="$enable_utmp"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMP 1
-_ACEOF
- 
-
-fi; 
-# Check whether --enable-utmpx or --disable-utmpx was given.
-if test "${enable_utmpx+set}" = set; then
-  enableval="$enable_utmpx"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMPX 1
-_ACEOF
- 
-
-fi; 
-# Check whether --enable-wtmp or --disable-wtmp was given.
-if test "${enable_wtmp+set}" = set; then
-  enableval="$enable_wtmp"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_WTMP 1
-_ACEOF
- 
-
-fi; 
-# Check whether --enable-wtmpx or --disable-wtmpx was given.
-if test "${enable_wtmpx+set}" = set; then
-  enableval="$enable_wtmpx"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_WTMPX 1
-_ACEOF
- 
-
-fi; 
-# Check whether --enable-libutil or --disable-libutil was given.
-if test "${enable_libutil+set}" = set; then
-  enableval="$enable_libutil"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_LOGIN 1
-_ACEOF
- 
-
-fi; 
-# Check whether --enable-pututline or --disable-pututline was given.
-if test "${enable_pututline+set}" = set; then
-  enableval="$enable_pututline"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_PUTUTLINE 1
-_ACEOF
- 
-
-fi; 
-# Check whether --enable-pututxline or --disable-pututxline was given.
-if test "${enable_pututxline+set}" = set; then
-  enableval="$enable_pututxline"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_PUTUTXLINE 1
-_ACEOF
- 
-
-fi; 
-
-# Check whether --with-lastlog or --without-lastlog was given.
-if test "${with_lastlog+set}" = set; then
-  withval="$with_lastlog"
-  
-                if test "x$withval" = "xno" ; then      
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_LASTLOG 1
-_ACEOF
-
-                else
-                        conf_lastlog_location=$withval
-                fi
-        
-
-fi; 
-
-
-echo "$as_me:$LINENO: checking if your system defines LASTLOG_FILE" >&5
-echo $ECHO_N "checking if your system defines LASTLOG_FILE... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <utmp.h>
-#ifdef HAVE_LASTLOG_H
-#  include <lastlog.h>
-#endif
-#ifdef HAVE_PATHS_H
-#  include <paths.h>
-#endif
-#ifdef HAVE_LOGIN_H
-# include <login.h>
-#endif
-        
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- char *lastlog = LASTLOG_FILE; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                echo "$as_me:$LINENO: checking if your system defines _PATH_LASTLOG" >&5
-echo $ECHO_N "checking if your system defines _PATH_LASTLOG... $ECHO_C" >&6
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <utmp.h>
-#ifdef HAVE_LASTLOG_H
-#  include <lastlog.h>
-#endif
-#ifdef HAVE_PATHS_H
-#  include <paths.h>
-#endif
-                
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- char *lastlog = _PATH_LASTLOG; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
-
-                        echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                        system_lastlog_path=no
-                
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-        
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-if test -z "$conf_lastlog_location"; then
-        if test x"$system_lastlog_path" = x"no" ; then
-                for f in /var/log/lastlog /usr/adm/lastlog /var/adm/lastlog /etc/security/lastlog ; do
-                                if (test -d "$f" || test -f "$f") ; then
-                                        conf_lastlog_location=$f
-                                fi
-                done
-                if test -z "$conf_lastlog_location"; then
-                        { echo "$as_me:$LINENO: WARNING: ** Cannot find lastlog **" >&5
-echo "$as_me: WARNING: ** Cannot find lastlog **" >&2;}
-                                        fi
-        fi
-fi
-
-if test -n "$conf_lastlog_location"; then
-        cat >>confdefs.h <<_ACEOF
-@%:@define CONF_LASTLOG_FILE "$conf_lastlog_location"
-_ACEOF
-
-fi      
-
-echo "$as_me:$LINENO: checking if your system defines UTMP_FILE" >&5
-echo $ECHO_N "checking if your system defines UTMP_FILE... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <utmp.h>
-#ifdef HAVE_PATHS_H
-#  include <paths.h>
-#endif
-        
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- char *utmp = UTMP_FILE; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-          system_utmp_path=no 
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-if test -z "$conf_utmp_location"; then
-        if test x"$system_utmp_path" = x"no" ; then
-                for f in /etc/utmp /usr/adm/utmp /var/run/utmp; do
-                        if test -f $f ; then
-                                conf_utmp_location=$f
-                        fi
-                done
-                if test -z "$conf_utmp_location"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMP 1
-_ACEOF
-
-                fi
-        fi
-fi
-if test -n "$conf_utmp_location"; then
-        cat >>confdefs.h <<_ACEOF
-@%:@define CONF_UTMP_FILE "$conf_utmp_location"
-_ACEOF
-
-fi      
-
-echo "$as_me:$LINENO: checking if your system defines WTMP_FILE" >&5
-echo $ECHO_N "checking if your system defines WTMP_FILE... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <utmp.h>
-#ifdef HAVE_PATHS_H
-#  include <paths.h>
-#endif
-        
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- char *wtmp = WTMP_FILE; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-          system_wtmp_path=no 
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-if test -z "$conf_wtmp_location"; then
-        if test x"$system_wtmp_path" = x"no" ; then
-                for f in /usr/adm/wtmp /var/log/wtmp; do
-                        if test -f $f ; then
-                                conf_wtmp_location=$f
-                        fi
-                done
-                if test -z "$conf_wtmp_location"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_WTMP 1
-_ACEOF
-
-                fi
-        fi
-fi
-if test -n "$conf_wtmp_location"; then
-        cat >>confdefs.h <<_ACEOF
-@%:@define CONF_WTMP_FILE "$conf_wtmp_location"
-_ACEOF
-
-fi      
-
-
-echo "$as_me:$LINENO: checking if your system defines UTMPX_FILE" >&5
-echo $ECHO_N "checking if your system defines UTMPX_FILE... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <utmp.h>
-#ifdef HAVE_UTMPX_H
-#include <utmpx.h>
-#endif
-#ifdef HAVE_PATHS_H
-#  include <paths.h>
-#endif
-        
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- char *utmpx = UTMPX_FILE; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-          system_utmpx_path=no 
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-if test -z "$conf_utmpx_location"; then
-        if test x"$system_utmpx_path" = x"no" ; then
-                cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMPX 1
-_ACEOF
-
-        fi
-else
-        cat >>confdefs.h <<_ACEOF
-@%:@define CONF_UTMPX_FILE "$conf_utmpx_location"
-_ACEOF
-
-fi      
-
-echo "$as_me:$LINENO: checking if your system defines WTMPX_FILE" >&5
-echo $ECHO_N "checking if your system defines WTMPX_FILE... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#include <utmp.h>
-#ifdef HAVE_UTMPX_H
-#include <utmpx.h>
-#endif
-#ifdef HAVE_PATHS_H
-#  include <paths.h>
-#endif
-        
-#ifdef F77_DUMMY_MAIN
-#  ifdef __cplusplus
-     extern "C"
-#  endif
-   int F77_DUMMY_MAIN() { return 1; }
-#endif
-int
-main ()
-{
- char *wtmpx = WTMPX_FILE; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6 
-else
-  echo "$as_me: failed program was:" >&5
-cat conftest.$ac_ext >&5
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-          system_wtmpx_path=no 
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-if test -z "$conf_wtmpx_location"; then
-        if test x"$system_wtmpx_path" = x"no" ; then
-                cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_WTMPX 1
-_ACEOF
-
-        fi
-else
-        cat >>confdefs.h <<_ACEOF
-@%:@define CONF_WTMPX_FILE "$conf_wtmpx_location"
-_ACEOF
-
-fi      
-
-
-if test ! -z "$blibpath" ; then
-        LDFLAGS="$LDFLAGS -blibpath:$blibpath"
-        { echo "$as_me:$LINENO: WARNING: Please check and edit -blibpath in LDFLAGS in Makefile" >&5
-echo "$as_me: WARNING: Please check and edit -blibpath in LDFLAGS in Makefile" >&2;}
-fi
-
-if test "$PAM_MSG" = yes ; then
-        LIBS=`echo $LIBS | sed 's/-lpam //'`
-fi
-if test "$ac_cv_lib_pam_pam_set_item" = yes ; then
-        LIBS=`echo $LIBS | sed 's/-ldl //'`
-fi
-
-
-ac_config_files="$ac_config_files Makefile openbsd-compat/Makefile scard/Makefile ssh_prng_cmds"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overriden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
-  (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
-      sed -n \
-        "s/'/'\\\\''/g;
-          s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-      ;;
-    esac;
-} |
-  sed '
-     t clear
-     : clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if cmp -s $cache_file confcache; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-    cat confcache >$cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[         ]*VPATH[        ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[    ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[      ]*$//;
-}'
-fi
-
-DEFS=-DHAVE_CONFIG_H
-
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-
-# NLS nuisances.
-# Support unset when possible.
-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
-    { $as_unset LANG || test "${LANG+set}" != set; } ||
-      { LANG=C; export LANG; }
-(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
-    { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
-      { LC_ALL=C; export LC_ALL; }
-(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
-    { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
-      { LC_TIME=C; export LC_TIME; }
-(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
-    { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
-      { LC_CTYPE=C; export LC_CTYPE; }
-(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
-    { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
-      { LANGUAGE=C; export LANGUAGE; }
-(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
-    { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
-      { LC_COLLATE=C; export LC_COLLATE; }
-(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
-    { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
-      { LC_NUMERIC=C; export LC_NUMERIC; }
-(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
-    { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
-      { LC_MESSAGES=C; export LC_MESSAGES; }
-
-
-# Name of the executable.
-as_me=`(basename "$0") 2>/dev/null ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-         X"$0" : 'X\(//\)$' \| \
-         X"$0" : 'X\(/\)$' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-          /^X\/\(\/\/\)$/{ s//\1/; q; }
-          /^X\/\(\/\).*/{ s//\1/; q; }
-          s/.*/./; q'`
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conftest.sh
-  echo  "exit 0"   >>conftest.sh
-  chmod +x conftest.sh
-  if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conftest.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-         case $as_dir in
-         /*)
-           if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-             CONFIG_SHELL=$as_dir/$as_base
-             export CONFIG_SHELL
-             exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-           fi;;
-         esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='      ' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS="   $as_nl"
-
-# CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX
-@%:@@%:@ Running $as_me. @%:@@%:@
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.53.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-_ACEOF
-
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
-  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
-  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
-  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_commands"; then
-  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-                   instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.53,
-  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-    shift
-    set dummy "$ac_option" "$ac_optarg" ${1+"$@"}
-    shift
-    ;;
-  -*);;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_need_defaults=false;;
-  esac
-
-  case $1 in
-  # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion"
-    exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;;
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    shift
-    CONFIG_FILES="$CONFIG_FILES $1"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $1"
-    ac_need_defaults=false;;
-
-  # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
-
-  *) ac_config_targets="$ac_config_targets $1" ;;
-
-  esac
-  shift
-done
-
-_ACEOF
-
-
-
-
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_config_target in $ac_config_targets
-do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "openbsd-compat/Makefile" ) CONFIG_FILES="$CONFIG_FILES openbsd-compat/Makefile" ;;
-  "scard/Makefile" ) CONFIG_FILES="$CONFIG_FILES scard/Makefile" ;;
-  "ssh_prng_cmds" ) CONFIG_FILES="$CONFIG_FILES ssh_prng_cmds" ;;
-  "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-fi
-
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-: ${TMPDIR=/tmp}
-{
-  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=$TMPDIR/cs$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
-   { (exit 1); exit 1; }
-}
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@build@,$build,;t t
-s,@build_cpu@,$build_cpu,;t t
-s,@build_vendor@,$build_vendor,;t t
-s,@build_os@,$build_os,;t t
-s,@host@,$host,;t t
-s,@host_cpu@,$host_cpu,;t t
-s,@host_vendor@,$host_vendor,;t t
-s,@host_os@,$host_os,;t t
-s,@CPP@,$CPP,;t t
-s,@RANLIB@,$RANLIB,;t t
-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@AR@,$AR,;t t
-s,@PERL@,$PERL,;t t
-s,@SED@,$SED,;t t
-s,@ENT@,$ENT,;t t
-s,@TEST_MINUS_S_SH@,$TEST_MINUS_S_SH,;t t
-s,@SH@,$SH,;t t
-s,@LOGIN_PROGRAM_FALLBACK@,$LOGIN_PROGRAM_FALLBACK,;t t
-s,@LD@,$LD,;t t
-s,@LIBWRAP@,$LIBWRAP,;t t
-s,@LIBPAM@,$LIBPAM,;t t
-s,@INSTALL_SSH_RAND_HELPER@,$INSTALL_SSH_RAND_HELPER,;t t
-s,@SSH_PRIVSEP_USER@,$SSH_PRIVSEP_USER,;t t
-s,@PROG_LS@,$PROG_LS,;t t
-s,@PROG_NETSTAT@,$PROG_NETSTAT,;t t
-s,@PROG_ARP@,$PROG_ARP,;t t
-s,@PROG_IFCONFIG@,$PROG_IFCONFIG,;t t
-s,@PROG_JSTAT@,$PROG_JSTAT,;t t
-s,@PROG_PS@,$PROG_PS,;t t
-s,@PROG_SAR@,$PROG_SAR,;t t
-s,@PROG_W@,$PROG_W,;t t
-s,@PROG_WHO@,$PROG_WHO,;t t
-s,@PROG_LAST@,$PROG_LAST,;t t
-s,@PROG_LASTLOG@,$PROG_LASTLOG,;t t
-s,@PROG_DF@,$PROG_DF,;t t
-s,@PROG_VMSTAT@,$PROG_VMSTAT,;t t
-s,@PROG_UPTIME@,$PROG_UPTIME,;t t
-s,@PROG_IPCS@,$PROG_IPCS,;t t
-s,@PROG_TAIL@,$PROG_TAIL,;t t
-s,@INSTALL_SSH_PRNG_CMDS@,$INSTALL_SSH_PRNG_CMDS,;t t
-s,@OPENSC_CONFIG@,$OPENSC_CONFIG,;t t
-s,@PRIVSEP_PATH@,$PRIVSEP_PATH,;t t
-s,@xauth_path@,$xauth_path,;t t
-s,@STRIP_OPT@,$STRIP_OPT,;t t
-s,@XAUTH_PATH@,$XAUTH_PATH,;t t
-s,@NROFF@,$NROFF,;t t
-s,@MANTYPE@,$MANTYPE,;t t
-s,@mansubdir@,$mansubdir,;t t
-s,@user_path@,$user_path,;t t
-s,@piddir@,$piddir,;t t
-CEOF
-
-_ACEOF
-
-  cat >>$CONFIG_STATUS <<\_ACEOF
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-        ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-        ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
-  fi
-fi # test -n "$CONFIG_FILES"
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-        cat >$tmp/stdin
-        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$ac_file" : 'X\(//\)[^/]' \| \
-         X"$ac_file" : 'X\(//\)$' \| \
-         X"$ac_file" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-          /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-          /^X\(\/\/\)$/{ s//\1/; q; }
-          /^X\(\/\).*/{ s//\1/; q; }
-          s/.*/./; q'`
-  { case "$ac_dir" in
-  [\\/]* | ?:[\\/]* ) as_incr_dir=;;
-  *)                      as_incr_dir=.;;
-esac
-as_dummy="$ac_dir"
-for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
-  case $as_mkdir_dir in
-    # Skip DOS drivespec
-    ?:) as_incr_dir=$as_mkdir_dir ;;
-    *)
-      as_incr_dir=$as_incr_dir/$as_mkdir_dir
-      test -d "$as_incr_dir" ||
-        mkdir "$as_incr_dir" ||
-        { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }
-    ;;
-  esac
-done; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-# absolute.
-ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
-ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
-  esac
-
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-                                     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-         # Absolute (can't be DOS-style, as IFS=:)
-         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         echo $f;;
-      *) # Relative
-         if test -f "$f"; then
-           # Build tree
-           echo $f
-         elif test -f "$srcdir/$f"; then
-           # Source tree
-           echo $srcdir/$f
-         else
-           # /dev/null tree
-           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
-
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([   ]*\)#\([        ]*define[       ][      ]*\)'
-ac_dB='[        ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([   ]*\)#\([        ]*\)undef\([    ][      ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-        cat >$tmp/stdin
-        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-         # Absolute (can't be DOS-style, as IFS=:)
-         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         echo $f;;
-      *) # Relative
-         if test -f "$f"; then
-           # Build tree
-           echo $f
-         elif test -f "$srcdir/$f"; then
-           # Source tree
-           echo $srcdir/$f
-         else
-           # /dev/null tree
-           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  # Remove the trailing spaces.
-  sed 's/[      ]*$//' $ac_file_inputs >$tmp/in
-
-_ACEOF
-
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h.  The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status.  Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\_ACEOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[    ]*#[    ]*define[       ][      ]*\([^  (][^    (]*\)\(([^)]*)\)[       ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-t end
-s,^[    ]*#[    ]*define[       ][      ]*\([^  ][^     ]*\)[   ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-_ACEOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless.  Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\_ACEOF
-s,^[    ]*#[    ]*undef[        ][      ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-_ACEOF
-
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo '  if egrep "^[    ]*#[    ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo '  :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
-do
-  # Write a limited-size here document to $tmp/defines.sed.
-  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#define' lines.
-  echo '/^[     ]*#[    ]*define/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
-  rm -f conftest.defines
-  mv conftest.tail conftest.defines
-done
-rm -f conftest.defines
-echo '  fi # egrep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
-  # Write a limited-size here document to $tmp/undefs.sed.
-  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#undef'
-  echo '/^[     ]*#[    ]*undef/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
-  rm -f conftest.undefs
-  mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    echo "/* Generated by configure.  */" >$tmp/config.h
-  else
-    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
-  fi
-  cat $tmp/in >>$tmp/config.h
-  rm -f $tmp/in
-  if test x"$ac_file" != x-; then
-    if cmp -s $ac_file $tmp/config.h 2>/dev/null; then
-      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$ac_file" : 'X\(//\)[^/]' \| \
-         X"$ac_file" : 'X\(//\)$' \| \
-         X"$ac_file" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-          /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-          /^X\(\/\/\)$/{ s//\1/; q; }
-          /^X\(\/\).*/{ s//\1/; q; }
-          s/.*/./; q'`
-      { case "$ac_dir" in
-  [\\/]* | ?:[\\/]* ) as_incr_dir=;;
-  *)                      as_incr_dir=.;;
-esac
-as_dummy="$ac_dir"
-for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
-  case $as_mkdir_dir in
-    # Skip DOS drivespec
-    ?:) as_incr_dir=$as_mkdir_dir ;;
-    *)
-      as_incr_dir=$as_incr_dir/$as_mkdir_dir
-      test -d "$as_incr_dir" ||
-        mkdir "$as_incr_dir" ||
-        { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }
-    ;;
-  esac
-done; }
-
-      rm -f $ac_file
-      mv $tmp/config.h $ac_file
-    fi
-  else
-    cat $tmp/config.h
-    rm -f $tmp/config.h
-  fi
-done
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || { (exit 1); exit 1; }
-fi
-
-
-# Print summary of options
-
-# Someone please show me a better way :)
-A=`eval echo ${prefix}` ; A=`eval echo ${A}`
-B=`eval echo ${bindir}` ; B=`eval echo ${B}`
-C=`eval echo ${sbindir}` ; C=`eval echo ${C}`
-D=`eval echo ${sysconfdir}` ; D=`eval echo ${D}`
-E=`eval echo ${libexecdir}/ssh-askpass` ; E=`eval echo ${E}`
-F=`eval echo ${mandir}/${mansubdir}X` ; F=`eval echo ${F}`
-G=`eval echo ${piddir}` ; G=`eval echo ${G}`
-H=`eval echo ${PRIVSEP_PATH}` ; H=`eval echo ${H}`
-I=`eval echo ${user_path}` ; I=`eval echo ${I}`
-J=`eval echo ${superuser_path}` ; J=`eval echo ${J}`
-
-echo ""
-echo "OpenSSH has been configured with the following options:"
-echo "                     User binaries: $B"
-echo "                   System binaries: $C"
-echo "               Configuration files: $D"
-echo "                   Askpass program: $E"
-echo "                      Manual pages: $F"
-echo "                          PID file: $G"
-echo "  Privilege separation chroot path: $H"
-if test "$USES_LOGIN_CONF" = "yes" ; then
-echo "   At runtime, sshd will use the path defined in /etc/login.conf"
-else
-echo "            sshd default user PATH: $I"
-fi
-if test ! -z "$superuser_path" ; then
-echo "          sshd superuser user PATH: $J"
-fi
-echo "                    Manpage format: $MANTYPE"
-echo "                       PAM support: ${PAM_MSG}"
-echo "                KerberosIV support: $KRB4_MSG"
-echo "                 KerberosV support: $KRB5_MSG"
-echo "                 Smartcard support: $SCARD_MSG"
-echo "                       AFS support: $AFS_MSG"
-echo "                     S/KEY support: $SKEY_MSG"
-echo "              TCP Wrappers support: $TCPW_MSG"
-echo "              MD5 password support: $MD5_MSG"
-echo "       IP address in \$DISPLAY hack: $DISPLAY_HACK_MSG"
-echo "          Use IPv4 by default hack: $IPV4_HACK_MSG"
-echo "           Translate v4 in v6 hack: $IPV4_IN6_HACK_MSG"
-echo "                  BSD Auth support: $BSD_AUTH_MSG"
-echo "              Random number source: $RAND_MSG"
-if test ! -z "$USE_RAND_HELPER" ; then
-echo "     ssh-rand-helper collects from: $RAND_HELPER_MSG"
-fi
-
-echo ""
-
-echo "              Host: ${host}"
-echo "          Compiler: ${CC}"
-echo "    Compiler flags: ${CFLAGS}"
-echo "Preprocessor flags: ${CPPFLAGS}"
-echo "      Linker flags: ${LDFLAGS}"
-echo "         Libraries: ${LIBWRAP} ${LIBPAM} ${LIBS}"
-
-echo ""
-
-if test "x$PAM_MSG" = "xyes" ; then
-        echo "PAM is enabled. You may need to install a PAM control file "
-        echo "for sshd, otherwise password authentication may fail. "
-        echo "Example PAM control files can be found in the contrib/ " 
-        echo "subdirectory"
-        echo ""
-fi
-
-if test ! -z "$RAND_HELPER_CMDHASH" ; then
-        echo "WARNING: you are using the builtin random number collection "
-        echo "service. Please read WARNING.RNG and request that your OS "
-        echo "vendor includes kernel-based random number collection in "
-        echo "future versions of your OS."
-        echo ""
-fi
-
diff --git a/autom4te-2.53.cache/requests b/autom4te-2.53.cache/requests
deleted file mode 100644
index 17e72cec4..000000000
--- a/autom4te-2.53.cache/requests
+++ /dev/null
@@ -1,96 +0,0 @@
-# This file was created by autom4te-2.53.
-# It contains the lists of macros which have been traced.
-# It can be safely removed.
-
-@request = (
-             bless( [
-                      '0',
-                      1,
-                      [
-                        '/usr/share/autoconf'
-                      ],
-                      [
-                        '--reload-state=/usr/share/autoconf/autoconf/autoconf.m4f',
-                        'aclocal.m4',
-                        'configure.ac'
-                      ],
-                      {
-                        'm4_pattern_forbid' => 1,
-                        'AC_TYPE_OFF_T' => 1,
-                        'AC_PROG_LIBTOOL' => 1,
-                        'AC_FUNC_STAT' => 1,
-                        'AC_HEADER_TIME' => 1,
-                        'AC_FUNC_WAIT3' => 1,
-                        'AC_STRUCT_TM' => 1,
-                        'AC_FUNC_LSTAT' => 1,
-                        'AC_TYPE_MODE_T' => 1,
-                        'AC_FUNC_STRTOD' => 1,
-                        'AC_CHECK_HEADERS' => 1,
-                        'AC_PROG_CXX' => 1,
-                        'AC_PATH_X' => 1,
-                        'AC_PROG_AWK' => 1,
-                        'AC_HEADER_STDC' => 1,
-                        'AC_HEADER_MAJOR' => 1,
-                        'AC_FUNC_ERROR_AT_LINE' => 1,
-                        'AC_PROG_GCC_TRADITIONAL' => 1,
-                        'AC_LIBSOURCE' => 1,
-                        'AC_STRUCT_ST_BLOCKS' => 1,
-                        'AC_TYPE_SIGNAL' => 1,
-                        'AC_TYPE_UID_T' => 1,
-                        'AC_PROG_MAKE_SET' => 1,
-                        'm4_pattern_allow' => 1,
-                        'AC_DEFINE_TRACE_LITERAL' => 1,
-                        'AM_PROG_LIBTOOL' => 1,
-                        'AC_FUNC_STRERROR_R' => 1,
-                        'AC_PROG_CC' => 1,
-                        'AC_DECL_SYS_SIGLIST' => 1,
-                        'AC_FUNC_FORK' => 1,
-                        'AC_FUNC_VPRINTF' => 1,
-                        'AC_FUNC_STRCOLL' => 1,
-                        'AC_PROG_YACC' => 1,
-                        'AC_INIT' => 1,
-                        'AC_STRUCT_TIMEZONE' => 1,
-                        'AC_FUNC_CHOWN' => 1,
-                        'AC_SUBST' => 1,
-                        'AC_FUNC_ALLOCA' => 1,
-                        'AC_FUNC_GETPGRP' => 1,
-                        'AC_PROG_RANLIB' => 1,
-                        'AC_FUNC_SETPGRP' => 1,
-                        'AC_CONFIG_SUBDIRS' => 1,
-                        'AC_FUNC_MMAP' => 1,
-                        'AC_TYPE_SIZE_T' => 1,
-                        'AC_CHECK_TYPES' => 1,
-                        'AC_FUNC_UTIME_NULL' => 1,
-                        'AC_FUNC_STRFTIME' => 1,
-                        'AC_HEADER_STAT' => 1,
-                        'AC_C_INLINE' => 1,
-                        'AC_PROG_CPP' => 1,
-                        'AC_C_CONST' => 1,
-                        'AC_PROG_LEX' => 1,
-                        'AC_TYPE_PID_T' => 1,
-                        'AC_CONFIG_FILES' => 1,
-                        'include' => 1,
-                        'AC_FUNC_SETVBUF_REVERSED' => 1,
-                        'AC_FUNC_FNMATCH' => 1,
-                        'AC_PROG_INSTALL' => 1,
-                        'AM_GNU_GETTEXT' => 1,
-                        'AC_FUNC_OBSTACK' => 1,
-                        'AC_CHECK_LIB' => 1,
-                        'AC_FUNC_MALLOC' => 1,
-                        'AC_FUNC_GETGROUPS' => 1,
-                        'AC_FUNC_GETLOADAVG' => 1,
-                        'AH_OUTPUT' => 1,
-                        'AC_FUNC_FSEEKO' => 1,
-                        'AC_FUNC_MKTIME' => 1,
-                        'AM_CONDITIONAL' => 1,
-                        'AC_CONFIG_HEADERS' => 1,
-                        'AC_HEADER_SYS_WAIT' => 1,
-                        'AC_PROG_LN_S' => 1,
-                        'AC_FUNC_MEMCMP' => 1,
-                        'm4_include' => 1,
-                        'AC_HEADER_DIRENT' => 1,
-                        'AC_CHECK_FUNCS' => 1
-                      }
-                    ], 'Request' )
-           );
-
diff --git a/autom4te-2.53.cache/traces.0 b/autom4te-2.53.cache/traces.0
deleted file mode 100644
index c928d0c58..000000000
--- a/autom4te-2.53.cache/traces.0
+++ /dev/null
@@ -1,941 +0,0 @@
-m4trace:configure.ac:3: -1- AC_INIT
-m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?A[CHUM]_])
-m4trace:configure.ac:3: -1- m4_pattern_forbid([_AC_])
-m4trace:configure.ac:3: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs. LIBOBJS'])
-m4trace:configure.ac:3: -1- m4_pattern_allow([^AS_FLAGS$])
-m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?m4_])
-m4trace:configure.ac:3: -1- m4_pattern_forbid([^dnl$])
-m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?AS_])
-m4trace:configure.ac:3: -1- AC_SUBST([SHELL], [${CONFIG_SHELL-/bin/sh}])
-m4trace:configure.ac:3: -1- AC_SUBST([PATH_SEPARATOR])
-m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_NAME], [m4_ifdef([AC_PACKAGE_NAME],      ['AC_PACKAGE_NAME'])])
-m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_TARNAME], [m4_ifdef([AC_PACKAGE_TARNAME],   ['AC_PACKAGE_TARNAME'])])
-m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_VERSION], [m4_ifdef([AC_PACKAGE_VERSION],   ['AC_PACKAGE_VERSION'])])
-m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_STRING], [m4_ifdef([AC_PACKAGE_STRING],    ['AC_PACKAGE_STRING'])])
-m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_BUGREPORT], [m4_ifdef([AC_PACKAGE_BUGREPORT], ['AC_PACKAGE_BUGREPORT'])])
-m4trace:configure.ac:3: -1- AC_SUBST([exec_prefix], [NONE])
-m4trace:configure.ac:3: -1- AC_SUBST([prefix], [NONE])
-m4trace:configure.ac:3: -1- AC_SUBST([program_transform_name], [s,x,x,])
-m4trace:configure.ac:3: -1- AC_SUBST([bindir], ['${exec_prefix}/bin'])
-m4trace:configure.ac:3: -1- AC_SUBST([sbindir], ['${exec_prefix}/sbin'])
-m4trace:configure.ac:3: -1- AC_SUBST([libexecdir], ['${exec_prefix}/libexec'])
-m4trace:configure.ac:3: -1- AC_SUBST([datadir], ['${prefix}/share'])
-m4trace:configure.ac:3: -1- AC_SUBST([sysconfdir], ['${prefix}/etc'])
-m4trace:configure.ac:3: -1- AC_SUBST([sharedstatedir], ['${prefix}/com'])
-m4trace:configure.ac:3: -1- AC_SUBST([localstatedir], ['${prefix}/var'])
-m4trace:configure.ac:3: -1- AC_SUBST([libdir], ['${exec_prefix}/lib'])
-m4trace:configure.ac:3: -1- AC_SUBST([includedir], ['${prefix}/include'])
-m4trace:configure.ac:3: -1- AC_SUBST([oldincludedir], ['/usr/include'])
-m4trace:configure.ac:3: -1- AC_SUBST([infodir], ['${prefix}/info'])
-m4trace:configure.ac:3: -1- AC_SUBST([mandir], ['${prefix}/man'])
-m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME])
-m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */
-#undef PACKAGE_NAME])
-m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME])
-m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME])
-m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION])
-m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */
-#undef PACKAGE_VERSION])
-m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING])
-m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING])
-m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT])
-m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT])
-m4trace:configure.ac:3: -1- AC_SUBST([build_alias])
-m4trace:configure.ac:3: -1- AC_SUBST([host_alias])
-m4trace:configure.ac:3: -1- AC_SUBST([target_alias])
-m4trace:configure.ac:3: -1- AC_SUBST([DEFS])
-m4trace:configure.ac:3: -1- AC_SUBST([ECHO_C])
-m4trace:configure.ac:3: -1- AC_SUBST([ECHO_N])
-m4trace:configure.ac:3: -1- AC_SUBST([ECHO_T])
-m4trace:configure.ac:3: -1- AC_SUBST([LIBS])
-m4trace:configure.ac:6: -1- AC_CONFIG_HEADERS([config.h])
-m4trace:configure.ac:7: -1- AC_PROG_CC
-m4trace:configure.ac:7: -1- AC_SUBST([CC])
-m4trace:configure.ac:7: -1- AC_SUBST([CFLAGS])
-m4trace:configure.ac:7: -1- AC_SUBST([LDFLAGS])
-m4trace:configure.ac:7: -1- AC_SUBST([CPPFLAGS])
-m4trace:configure.ac:7: -1- AC_SUBST([CC])
-m4trace:configure.ac:7: -1- AC_SUBST([ac_ct_CC])
-m4trace:configure.ac:7: -1- AC_SUBST([CC])
-m4trace:configure.ac:7: -1- AC_SUBST([ac_ct_CC])
-m4trace:configure.ac:7: -1- AC_SUBST([CC])
-m4trace:configure.ac:7: -1- AC_SUBST([CC])
-m4trace:configure.ac:7: -1- AC_SUBST([ac_ct_CC])
-m4trace:configure.ac:7: -1- AC_SUBST([EXEEXT], [$ac_cv_exeext])
-m4trace:configure.ac:7: -1- AC_SUBST([OBJEXT], [$ac_cv_objext])
-m4trace:configure.ac:8: -1- AC_SUBST([build], [$ac_cv_build])
-m4trace:configure.ac:8: -1- AC_SUBST([build_cpu], [`echo $ac_cv_build | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\1/'`])
-m4trace:configure.ac:8: -1- AC_SUBST([build_vendor], [`echo $ac_cv_build | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\2/'`])
-m4trace:configure.ac:8: -1- AC_SUBST([build_os], [`echo $ac_cv_build | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\3/'`])
-m4trace:configure.ac:8: -1- AC_SUBST([host], [$ac_cv_host])
-m4trace:configure.ac:8: -1- AC_SUBST([host_cpu], [`echo $ac_cv_host | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\1/'`])
-m4trace:configure.ac:8: -1- AC_SUBST([host_vendor], [`echo $ac_cv_host | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\2/'`])
-m4trace:configure.ac:8: -1- AC_SUBST([host_os], [`echo $ac_cv_host | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\3/'`])
-m4trace:configure.ac:9: -1- AC_DEFINE_TRACE_LITERAL([WORDS_BIGENDIAN])
-m4trace:configure.ac:9: -1- AH_OUTPUT([WORDS_BIGENDIAN], [/* Define to 1 if your processor stores words with the most significant byte
-   first (like Motorola and SPARC, unlike Intel and VAX). */
-#undef WORDS_BIGENDIAN])
-m4trace:configure.ac:12: -1- AC_PROG_CPP
-m4trace:configure.ac:12: -1- AC_SUBST([CPP])
-m4trace:configure.ac:12: -1- AC_SUBST([CPPFLAGS])
-m4trace:configure.ac:12: -1- AC_SUBST([CPP])
-m4trace:configure.ac:13: -1- AC_PROG_RANLIB
-m4trace:configure.ac:13: -1- AC_SUBST([RANLIB])
-m4trace:configure.ac:13: -1- AC_SUBST([ac_ct_RANLIB])
-m4trace:configure.ac:14: -1- AC_PROG_INSTALL
-m4trace:configure.ac:14: -1- AC_SUBST([INSTALL_PROGRAM])
-m4trace:configure.ac:14: -1- AC_SUBST([INSTALL_SCRIPT])
-m4trace:configure.ac:14: -1- AC_SUBST([INSTALL_DATA])
-m4trace:configure.ac:15: -1- AC_SUBST([AR], [$ac_cv_path_AR])
-m4trace:configure.ac:16: -1- AC_SUBST([PERL], [$ac_cv_path_PERL])
-m4trace:configure.ac:17: -1- AC_SUBST([SED], [$ac_cv_path_SED])
-m4trace:configure.ac:18: -1- AC_SUBST([PERL])
-m4trace:configure.ac:19: -1- AC_SUBST([ENT], [$ac_cv_path_ENT])
-m4trace:configure.ac:20: -1- AC_SUBST([ENT])
-m4trace:configure.ac:21: -1- AC_SUBST([TEST_MINUS_S_SH], [$ac_cv_path_TEST_MINUS_S_SH])
-m4trace:configure.ac:22: -1- AC_SUBST([TEST_MINUS_S_SH], [$ac_cv_path_TEST_MINUS_S_SH])
-m4trace:configure.ac:23: -1- AC_SUBST([TEST_MINUS_S_SH], [$ac_cv_path_TEST_MINUS_S_SH])
-m4trace:configure.ac:24: -1- AC_SUBST([SH], [$ac_cv_path_SH])
-m4trace:configure.ac:27: -1- AC_DEFINE_TRACE_LITERAL([_FILE_OFFSET_BITS])
-m4trace:configure.ac:27: -1- AH_OUTPUT([_FILE_OFFSET_BITS], [/* Number of bits in a file offset, on hosts where this is settable. */
-#undef _FILE_OFFSET_BITS])
-m4trace:configure.ac:27: -1- AC_DEFINE_TRACE_LITERAL([_LARGE_FILES])
-m4trace:configure.ac:27: -1- AH_OUTPUT([_LARGE_FILES], [/* Define for large files, on AIX-style hosts. */
-#undef _LARGE_FILES])
-m4trace:configure.ac:35: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_PROGRAM_FALLBACK])
-m4trace:configure.ac:38: -1- AC_SUBST([LOGIN_PROGRAM_FALLBACK], [$ac_cv_path_LOGIN_PROGRAM_FALLBACK])
-m4trace:configure.ac:40: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_PROGRAM_FALLBACK])
-m4trace:configure.ac:47: -1- AC_SUBST([LD])
-m4trace:configure.ac:49: -1- AC_C_INLINE
-m4trace:configure.ac:49: -1- AC_DEFINE_TRACE_LITERAL([inline])
-m4trace:configure.ac:49: -1- AH_OUTPUT([inline], [/* Define as \`__inline' if that's what the C compiler calls it, or to nothing
-   if it is not supported. */
-#undef inline])
-m4trace:configure.ac:49: -1- AC_DEFINE_TRACE_LITERAL([inline])
-m4trace:configure.ac:79: -1- AC_DEFINE_TRACE_LITERAL([WITH_AIXAUTHENTICATE])
-m4trace:configure.ac:79: -1- AC_CHECK_LIB([s], [authenticate], [ AC_DEFINE(WITH_AIXAUTHENTICATE)
-                                LIBS="$LIBS -ls"
-                        ])
-m4trace:configure.ac:79: -1- AC_DEFINE_TRACE_LITERAL([WITH_AIXAUTHENTICATE])
-m4trace:configure.ac:80: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_GETADDRINFO])
-m4trace:configure.ac:81: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_REALPATH])
-m4trace:configure.ac:83: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_LASTLOG])
-m4trace:configure.ac:84: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NEEDS_UTMPX])
-m4trace:configure.ac:85: -1- AC_DEFINE_TRACE_LITERAL([SETPROCTITLE_STRATEGY])
-m4trace:configure.ac:86: -1- AC_DEFINE_TRACE_LITERAL([SETPROCTITLE_PS_PADDING])
-m4trace:configure.ac:91: -1- AC_DEFINE_TRACE_LITERAL([HAVE_CYGWIN])
-m4trace:configure.ac:92: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:93: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_SHADOW])
-m4trace:configure.ac:94: -1- AC_DEFINE_TRACE_LITERAL([IPV4_DEFAULT])
-m4trace:configure.ac:95: -1- AC_DEFINE_TRACE_LITERAL([IP_TOS_IS_BROKEN])
-m4trace:configure.ac:96: -1- AC_DEFINE_TRACE_LITERAL([NO_X11_UNIX_SOCKETS])
-m4trace:configure.ac:97: -1- AC_DEFINE_TRACE_LITERAL([NO_IPPORT_RESERVED_CONCEPT])
-m4trace:configure.ac:98: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_FD_PASSING])
-m4trace:configure.ac:99: -1- AC_DEFINE_TRACE_LITERAL([SETGROUPS_NOOP])
-m4trace:configure.ac:102: -1- AC_DEFINE_TRACE_LITERAL([IP_TOS_IS_BROKEN])
-m4trace:configure.ac:114: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_GETADDRINFO])
-m4trace:configure.ac:122: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SECUREWARE])
-m4trace:configure.ac:123: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:124: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NO_ENDOPT])
-m4trace:configure.ac:125: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NEEDS_UTMPX])
-m4trace:configure.ac:126: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_SHADOW])
-m4trace:configure.ac:127: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMP])
-m4trace:configure.ac:128: -1- AC_DEFINE_TRACE_LITERAL([SETPROCTITLE_STRATEGY])
-m4trace:configure.ac:130: -1- AC_CHECK_LIB([xnet], [t_error], [], [{ { echo "$as_me:$LINENO: error: *** -lxnet needed on HP-UX - check config.log ***" >&5
-echo "$as_me: error: *** -lxnet needed on HP-UX - check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }])
-m4trace:configure.ac:130: -1- AH_OUTPUT([HAVE_LIBXNET], [/* Define to 1 if you have the \`xnet' library (-lxnet). */
-#undef HAVE_LIBXNET])
-m4trace:configure.ac:130: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBXNET])
-m4trace:configure.ac:139: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:140: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NO_ENDOPT])
-m4trace:configure.ac:141: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NEEDS_UTMPX])
-m4trace:configure.ac:142: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_SHADOW])
-m4trace:configure.ac:143: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMP])
-m4trace:configure.ac:144: -1- AC_DEFINE_TRACE_LITERAL([SETPROCTITLE_STRATEGY])
-m4trace:configure.ac:146: -1- AC_CHECK_LIB([xnet], [t_error], [], [{ { echo "$as_me:$LINENO: error: *** -lxnet needed on HP-UX - check config.log ***" >&5
-echo "$as_me: error: *** -lxnet needed on HP-UX - check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }])
-m4trace:configure.ac:146: -1- AH_OUTPUT([HAVE_LIBXNET], [/* Define to 1 if you have the \`xnet' library (-lxnet). */
-#undef HAVE_LIBXNET])
-m4trace:configure.ac:146: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBXNET])
-m4trace:configure.ac:151: -1- AC_DEFINE_TRACE_LITERAL([PAM_SUN_CODEBASE])
-m4trace:configure.ac:152: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:153: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NO_ENDOPT])
-m4trace:configure.ac:154: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NEEDS_UTMPX])
-m4trace:configure.ac:155: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_SHADOW])
-m4trace:configure.ac:156: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMP])
-m4trace:configure.ac:157: -1- AC_DEFINE_TRACE_LITERAL([SETPROCTITLE_STRATEGY])
-m4trace:configure.ac:159: -1- AC_CHECK_LIB([xnet], [t_error], [], [{ { echo "$as_me:$LINENO: error: *** -lxnet needed on HP-UX - check config.log ***" >&5
-echo "$as_me: error: *** -lxnet needed on HP-UX - check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }])
-m4trace:configure.ac:159: -1- AH_OUTPUT([HAVE_LIBXNET], [/* Define to 1 if you have the \`xnet' library (-lxnet). */
-#undef HAVE_LIBXNET])
-m4trace:configure.ac:159: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBXNET])
-m4trace:configure.ac:165: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_INET_NTOA])
-m4trace:configure.ac:166: -1- AC_DEFINE_TRACE_LITERAL([WITH_ABBREV_NO_TTY])
-m4trace:configure.ac:172: -1- AC_DEFINE_TRACE_LITERAL([WITH_IRIX_ARRAY])
-m4trace:configure.ac:173: -1- AC_DEFINE_TRACE_LITERAL([WITH_IRIX_PROJECT])
-m4trace:configure.ac:174: -1- AC_DEFINE_TRACE_LITERAL([WITH_IRIX_AUDIT])
-m4trace:configure.ac:175: -1- AC_DEFINE_TRACE_LITERAL([WITH_IRIX_JOBS])
-m4trace:configure.ac:176: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_INET_NTOA])
-m4trace:configure.ac:177: -1- AC_DEFINE_TRACE_LITERAL([WITH_ABBREV_NO_TTY])
-m4trace:configure.ac:182: -1- AC_DEFINE_TRACE_LITERAL([DONT_TRY_OTHER_AF])
-m4trace:configure.ac:183: -1- AC_DEFINE_TRACE_LITERAL([PAM_TTY_KLUDGE])
-m4trace:configure.ac:184: -1- AC_DEFINE_TRACE_LITERAL([SETPROCTITLE_STRATEGY])
-m4trace:configure.ac:185: -1- AC_DEFINE_TRACE_LITERAL([SETPROCTITLE_PS_PADDING])
-m4trace:configure.ac:189: -1- AC_DEFINE_TRACE_LITERAL([HAVE_NEWS4])
-m4trace:configure.ac:204: -1- AC_DEFINE_TRACE_LITERAL([HAVE_NEXT])
-m4trace:configure.ac:205: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_REALPATH])
-m4trace:configure.ac:206: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:207: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_SAVED_UIDS])
-m4trace:configure.ac:215: -1- AC_DEFINE_TRACE_LITERAL([PAM_SUN_CODEBASE])
-m4trace:configure.ac:216: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NEEDS_UTMPX])
-m4trace:configure.ac:217: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NEEDS_TERM])
-m4trace:configure.ac:218: -1- AC_DEFINE_TRACE_LITERAL([PAM_TTY_KLUDGE])
-m4trace:configure.ac:219: -1- AC_DEFINE_TRACE_LITERAL([STREAMS_PUSH_ACQUIRES_CTTY])
-m4trace:configure.ac:226: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMP])
-m4trace:configure.ac:227: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_WTMP])
-m4trace:configure.ac:234: -1- AC_CHECK_FUNCS([getpwanam])
-m4trace:configure.ac:234: -1- AH_OUTPUT([HAVE_GETPWANAM], [/* Define to 1 if you have the \`getpwanam' function. */
-#undef HAVE_GETPWANAM])
-m4trace:configure.ac:235: -1- AC_DEFINE_TRACE_LITERAL([PAM_SUN_CODEBASE])
-m4trace:configure.ac:239: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:245: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:252: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:253: -1- AC_DEFINE_TRACE_LITERAL([IP_TOS_IS_BROKEN])
-m4trace:configure.ac:261: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:266: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:278: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_SYS_TERMIO_H])
-m4trace:configure.ac:279: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:280: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SECUREWARE])
-m4trace:configure.ac:281: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_SHADOW])
-m4trace:configure.ac:282: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_SAVED_UIDS])
-m4trace:configure.ac:283: -1- AC_CHECK_FUNCS([getluid setluid])
-m4trace:configure.ac:283: -1- AH_OUTPUT([HAVE_GETLUID], [/* Define to 1 if you have the \`getluid' function. */
-#undef HAVE_GETLUID])
-m4trace:configure.ac:283: -1- AH_OUTPUT([HAVE_SETLUID], [/* Define to 1 if you have the \`setluid' function. */
-#undef HAVE_SETLUID])
-m4trace:configure.ac:295: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:296: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SECUREWARE])
-m4trace:configure.ac:297: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_SHADOW])
-m4trace:configure.ac:298: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_FD_PASSING])
-m4trace:configure.ac:299: -1- AC_CHECK_FUNCS([getluid setluid])
-m4trace:configure.ac:299: -1- AH_OUTPUT([HAVE_GETLUID], [/* Define to 1 if you have the \`getluid' function. */
-#undef HAVE_GETLUID])
-m4trace:configure.ac:299: -1- AH_OUTPUT([HAVE_SETLUID], [/* Define to 1 if you have the \`setluid' function. */
-#undef HAVE_SETLUID])
-m4trace:configure.ac:303: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:304: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_FD_PASSING])
-m4trace:configure.ac:310: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:311: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_FD_PASSING])
-m4trace:configure.ac:312: -1- AC_DEFINE_TRACE_LITERAL([NO_SSH_LASTLOG])
-m4trace:configure.ac:332: -1- AC_DEFINE_TRACE_LITERAL([HAVE_OSF_SIA])
-m4trace:configure.ac:333: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_LOGIN])
-m4trace:configure.ac:334: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_FD_PASSING])
-m4trace:configure.ac:340: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_FD_PASSING])
-m4trace:configure.ac:344: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:345: -1- AC_DEFINE_TRACE_LITERAL([NO_X11_UNIX_SOCKETS])
-m4trace:configure.ac:346: -1- AC_DEFINE_TRACE_LITERAL([MISSING_NFDBITS])
-m4trace:configure.ac:347: -1- AC_DEFINE_TRACE_LITERAL([MISSING_HOWMANY])
-m4trace:configure.ac:348: -1- AC_DEFINE_TRACE_LITERAL([MISSING_FD_MASK])
-m4trace:configure.ac:396: -1- AC_CHECK_HEADERS([bstring.h crypt.h endian.h floatingpoint.h \
-        getopt.h glob.h ia.h lastlog.h libgen.h limits.h login.h \
-        login_cap.h maillock.h netdb.h netgroup.h \
-        netinet/in_systm.h paths.h pty.h readpassphrase.h \
-        rpc/types.h security/pam_appl.h shadow.h stddef.h stdint.h \
-        strings.h sys/bitypes.h sys/bsdtty.h sys/cdefs.h \
-        sys/mman.h sys/pstat.h sys/select.h sys/stat.h \
-        sys/stropts.h sys/sysmacros.h sys/time.h sys/timers.h \
-        sys/un.h time.h tmpdir.h ttyent.h usersec.h \
-        util.h utime.h utmp.h utmpx.h])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_BSTRING_H], [/* Define to 1 if you have the <bstring.h> header file. */
-#undef HAVE_BSTRING_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_CRYPT_H], [/* Define to 1 if you have the <crypt.h> header file. */
-#undef HAVE_CRYPT_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_ENDIAN_H], [/* Define to 1 if you have the <endian.h> header file. */
-#undef HAVE_ENDIAN_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_FLOATINGPOINT_H], [/* Define to 1 if you have the <floatingpoint.h> header file. */
-#undef HAVE_FLOATINGPOINT_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_GETOPT_H], [/* Define to 1 if you have the <getopt.h> header file. */
-#undef HAVE_GETOPT_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_GLOB_H], [/* Define to 1 if you have the <glob.h> header file. */
-#undef HAVE_GLOB_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_IA_H], [/* Define to 1 if you have the <ia.h> header file. */
-#undef HAVE_IA_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_LASTLOG_H], [/* Define to 1 if you have the <lastlog.h> header file. */
-#undef HAVE_LASTLOG_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_LIBGEN_H], [/* Define to 1 if you have the <libgen.h> header file. */
-#undef HAVE_LIBGEN_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_LIMITS_H], [/* Define to 1 if you have the <limits.h> header file. */
-#undef HAVE_LIMITS_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_LOGIN_H], [/* Define to 1 if you have the <login.h> header file. */
-#undef HAVE_LOGIN_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_LOGIN_CAP_H], [/* Define to 1 if you have the <login_cap.h> header file. */
-#undef HAVE_LOGIN_CAP_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_MAILLOCK_H], [/* Define to 1 if you have the <maillock.h> header file. */
-#undef HAVE_MAILLOCK_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_NETDB_H], [/* Define to 1 if you have the <netdb.h> header file. */
-#undef HAVE_NETDB_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_NETGROUP_H], [/* Define to 1 if you have the <netgroup.h> header file. */
-#undef HAVE_NETGROUP_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_NETINET_IN_SYSTM_H], [/* Define to 1 if you have the <netinet/in_systm.h> header file. */
-#undef HAVE_NETINET_IN_SYSTM_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_PATHS_H], [/* Define to 1 if you have the <paths.h> header file. */
-#undef HAVE_PATHS_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_PTY_H], [/* Define to 1 if you have the <pty.h> header file. */
-#undef HAVE_PTY_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_READPASSPHRASE_H], [/* Define to 1 if you have the <readpassphrase.h> header file. */
-#undef HAVE_READPASSPHRASE_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_RPC_TYPES_H], [/* Define to 1 if you have the <rpc/types.h> header file. */
-#undef HAVE_RPC_TYPES_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SECURITY_PAM_APPL_H], [/* Define to 1 if you have the <security/pam_appl.h> header file. */
-#undef HAVE_SECURITY_PAM_APPL_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SHADOW_H], [/* Define to 1 if you have the <shadow.h> header file. */
-#undef HAVE_SHADOW_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_STDDEF_H], [/* Define to 1 if you have the <stddef.h> header file. */
-#undef HAVE_STDDEF_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_STDINT_H], [/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_STRINGS_H], [/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SYS_BITYPES_H], [/* Define to 1 if you have the <sys/bitypes.h> header file. */
-#undef HAVE_SYS_BITYPES_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SYS_BSDTTY_H], [/* Define to 1 if you have the <sys/bsdtty.h> header file. */
-#undef HAVE_SYS_BSDTTY_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SYS_CDEFS_H], [/* Define to 1 if you have the <sys/cdefs.h> header file. */
-#undef HAVE_SYS_CDEFS_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SYS_MMAN_H], [/* Define to 1 if you have the <sys/mman.h> header file. */
-#undef HAVE_SYS_MMAN_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SYS_PSTAT_H], [/* Define to 1 if you have the <sys/pstat.h> header file. */
-#undef HAVE_SYS_PSTAT_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SYS_SELECT_H], [/* Define to 1 if you have the <sys/select.h> header file. */
-#undef HAVE_SYS_SELECT_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SYS_STAT_H], [/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SYS_STROPTS_H], [/* Define to 1 if you have the <sys/stropts.h> header file. */
-#undef HAVE_SYS_STROPTS_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SYS_SYSMACROS_H], [/* Define to 1 if you have the <sys/sysmacros.h> header file. */
-#undef HAVE_SYS_SYSMACROS_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SYS_TIME_H], [/* Define to 1 if you have the <sys/time.h> header file. */
-#undef HAVE_SYS_TIME_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SYS_TIMERS_H], [/* Define to 1 if you have the <sys/timers.h> header file. */
-#undef HAVE_SYS_TIMERS_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SYS_UN_H], [/* Define to 1 if you have the <sys/un.h> header file. */
-#undef HAVE_SYS_UN_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_TIME_H], [/* Define to 1 if you have the <time.h> header file. */
-#undef HAVE_TIME_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_TMPDIR_H], [/* Define to 1 if you have the <tmpdir.h> header file. */
-#undef HAVE_TMPDIR_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_TTYENT_H], [/* Define to 1 if you have the <ttyent.h> header file. */
-#undef HAVE_TTYENT_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_USERSEC_H], [/* Define to 1 if you have the <usersec.h> header file. */
-#undef HAVE_USERSEC_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_UTIL_H], [/* Define to 1 if you have the <util.h> header file. */
-#undef HAVE_UTIL_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_UTIME_H], [/* Define to 1 if you have the <utime.h> header file. */
-#undef HAVE_UTIME_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_UTMP_H], [/* Define to 1 if you have the <utmp.h> header file. */
-#undef HAVE_UTMP_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_UTMPX_H], [/* Define to 1 if you have the <utmpx.h> header file. */
-#undef HAVE_UTMPX_H])
-m4trace:configure.ac:396: -1- AC_HEADER_STDC
-m4trace:configure.ac:396: -1- AC_DEFINE_TRACE_LITERAL([STDC_HEADERS])
-m4trace:configure.ac:396: -1- AH_OUTPUT([STDC_HEADERS], [/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS])
-m4trace:configure.ac:396: -1- AC_CHECK_HEADERS([sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-                  inttypes.h stdint.h unistd.h], [], [], [$ac_includes_default])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SYS_TYPES_H], [/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_SYS_STAT_H], [/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_STDLIB_H], [/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_STRING_H], [/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_MEMORY_H], [/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_STRINGS_H], [/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_INTTYPES_H], [/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_STDINT_H], [/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H])
-m4trace:configure.ac:396: -1- AH_OUTPUT([HAVE_UNISTD_H], [/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H])
-m4trace:configure.ac:399: -2- AC_CHECK_LIB([nsl], [yp_match])
-m4trace:configure.ac:399: -2- AH_OUTPUT([HAVE_LIBNSL], [/* Define to 1 if you have the \`nsl' library (-lnsl). */
-#undef HAVE_LIBNSL])
-m4trace:configure.ac:399: -2- AC_DEFINE_TRACE_LITERAL([HAVE_LIBNSL])
-m4trace:configure.ac:400: -2- AC_CHECK_LIB([socket], [setsockopt])
-m4trace:configure.ac:400: -2- AH_OUTPUT([HAVE_LIBSOCKET], [/* Define to 1 if you have the \`socket' library (-lsocket). */
-#undef HAVE_LIBSOCKET])
-m4trace:configure.ac:400: -2- AC_DEFINE_TRACE_LITERAL([HAVE_LIBSOCKET])
-m4trace:configure.ac:405: -1- AC_CHECK_LIB([rpc], [innetgr], [LIBS="-lrpc -lyp -lrpc $LIBS" ], [], [-lyp -lrpc])
-m4trace:configure.ac:410: -2- AC_CHECK_LIB([gen], [getspnam], [LIBS="$LIBS -lgen"])
-m4trace:configure.ac:452: -1- AC_CHECK_LIB([z], [deflate], [], [{ { echo "$as_me:$LINENO: error: *** zlib missing - please install first or check config.log ***" >&5
-echo "$as_me: error: *** zlib missing - please install first or check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }])
-m4trace:configure.ac:452: -1- AH_OUTPUT([HAVE_LIBZ], [/* Define to 1 if you have the \`z' library (-lz). */
-#undef HAVE_LIBZ])
-m4trace:configure.ac:452: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBZ])
-m4trace:configure.ac:457: -1- AC_CHECK_LIB([resolv], [strcasecmp], [LIBS="$LIBS -lresolv"])
-m4trace:configure.ac:461: -1- AC_CHECK_LIB([c89], [utimes], [AC_DEFINE(HAVE_UTIMES)
-                                        LIBS="$LIBS -lc89"])
-m4trace:configure.ac:461: -1- AC_DEFINE_TRACE_LITERAL([HAVE_UTIMES])
-m4trace:configure.ac:464: -1- AC_CHECK_HEADERS([libutil.h])
-m4trace:configure.ac:464: -1- AH_OUTPUT([HAVE_LIBUTIL_H], [/* Define to 1 if you have the <libutil.h> header file. */
-#undef HAVE_LIBUTIL_H])
-m4trace:configure.ac:465: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LOGIN])
-m4trace:configure.ac:466: -1- AC_CHECK_FUNCS([logout updwtmp logwtmp])
-m4trace:configure.ac:466: -1- AH_OUTPUT([HAVE_LOGOUT], [/* Define to 1 if you have the \`logout' function. */
-#undef HAVE_LOGOUT])
-m4trace:configure.ac:466: -1- AH_OUTPUT([HAVE_UPDWTMP], [/* Define to 1 if you have the \`updwtmp' function. */
-#undef HAVE_UPDWTMP])
-m4trace:configure.ac:466: -1- AH_OUTPUT([HAVE_LOGWTMP], [/* Define to 1 if you have the \`logwtmp' function. */
-#undef HAVE_LOGWTMP])
-m4trace:configure.ac:468: -1- AC_FUNC_STRFTIME
-m4trace:configure.ac:468: -1- AC_CHECK_FUNCS([strftime], [], [# strftime is in -lintl on SCO UNIX.
-AC_CHECK_LIB(intl, strftime,
-             [AC_DEFINE(HAVE_STRFTIME)
-LIBS="-lintl $LIBS"])])
-m4trace:configure.ac:468: -1- AH_OUTPUT([HAVE_STRFTIME], [/* Define to 1 if you have the \`strftime' function. */
-#undef HAVE_STRFTIME])
-m4trace:configure.ac:468: -1- AC_CHECK_LIB([intl], [strftime], [AC_DEFINE(HAVE_STRFTIME)
-LIBS="-lintl $LIBS"])
-m4trace:configure.ac:468: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRFTIME])
-m4trace:configure.ac:486: -1- AC_DEFINE_TRACE_LITERAL([GLOB_HAS_ALTDIRFUNC])
-m4trace:configure.ac:502: -1- AC_DEFINE_TRACE_LITERAL([GLOB_HAS_GL_MATCHC])
-m4trace:configure.ac:516: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_ONE_BYTE_DIRENT_D_NAME])
-m4trace:configure.ac:549: -1- AC_DEFINE_TRACE_LITERAL([SKEY])
-m4trace:configure.ac:603: -1- AC_DEFINE_TRACE_LITERAL([LIBWRAP])
-m4trace:configure.ac:603: -1- AC_SUBST([LIBWRAP])
-m4trace:configure.ac:618: -1- AC_CHECK_FUNCS([\
-        arc4random __b64_ntop b64_ntop __b64_pton b64_pton basename bcopy \
-        bindresvport_sa clock fchmod fchown freeaddrinfo futimes \
-        gai_strerror getaddrinfo getcwd getgrouplist getnameinfo getopt \
-        getpeereid _getpty getrlimit getrusage getttyent glob inet_aton \
-        inet_ntoa inet_ntop innetgr login_getcapbool md5_crypt memmove \
-        mkdtemp mmap ngetaddrinfo nsleep ogetaddrinfo openpty pstat \
-        readpassphrase realpath recvmsg rresvport_af sendmsg setdtablesize \
-        setegid setenv seteuid setgroups setlogin setpcred setproctitle \
-        setresgid setreuid setrlimit setsid setvbuf sigaction sigvec \
-        snprintf socketpair strerror strlcat strlcpy strmode strnvis \
-        sysconf tcgetpgrp truncate utimes vhangup vsnprintf waitpid \
-])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_ARC4RANDOM], [/* Define to 1 if you have the \`arc4random' function. */
-#undef HAVE_ARC4RANDOM])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE___B64_NTOP], [/* Define to 1 if you have the \`__b64_ntop' function. */
-#undef HAVE___B64_NTOP])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_B64_NTOP], [/* Define to 1 if you have the \`b64_ntop' function. */
-#undef HAVE_B64_NTOP])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE___B64_PTON], [/* Define to 1 if you have the \`__b64_pton' function. */
-#undef HAVE___B64_PTON])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_B64_PTON], [/* Define to 1 if you have the \`b64_pton' function. */
-#undef HAVE_B64_PTON])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_BASENAME], [/* Define to 1 if you have the \`basename' function. */
-#undef HAVE_BASENAME])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_BCOPY], [/* Define to 1 if you have the \`bcopy' function. */
-#undef HAVE_BCOPY])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_BINDRESVPORT_SA], [/* Define to 1 if you have the \`bindresvport_sa' function. */
-#undef HAVE_BINDRESVPORT_SA])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_CLOCK], [/* Define to 1 if you have the \`clock' function. */
-#undef HAVE_CLOCK])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_FCHMOD], [/* Define to 1 if you have the \`fchmod' function. */
-#undef HAVE_FCHMOD])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_FCHOWN], [/* Define to 1 if you have the \`fchown' function. */
-#undef HAVE_FCHOWN])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_FREEADDRINFO], [/* Define to 1 if you have the \`freeaddrinfo' function. */
-#undef HAVE_FREEADDRINFO])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_FUTIMES], [/* Define to 1 if you have the \`futimes' function. */
-#undef HAVE_FUTIMES])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_GAI_STRERROR], [/* Define to 1 if you have the \`gai_strerror' function. */
-#undef HAVE_GAI_STRERROR])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_GETADDRINFO], [/* Define to 1 if you have the \`getaddrinfo' function. */
-#undef HAVE_GETADDRINFO])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_GETCWD], [/* Define to 1 if you have the \`getcwd' function. */
-#undef HAVE_GETCWD])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_GETGROUPLIST], [/* Define to 1 if you have the \`getgrouplist' function. */
-#undef HAVE_GETGROUPLIST])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_GETNAMEINFO], [/* Define to 1 if you have the \`getnameinfo' function. */
-#undef HAVE_GETNAMEINFO])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_GETOPT], [/* Define to 1 if you have the \`getopt' function. */
-#undef HAVE_GETOPT])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_GETPEEREID], [/* Define to 1 if you have the \`getpeereid' function. */
-#undef HAVE_GETPEEREID])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE__GETPTY], [/* Define to 1 if you have the \`_getpty' function. */
-#undef HAVE__GETPTY])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_GETRLIMIT], [/* Define to 1 if you have the \`getrlimit' function. */
-#undef HAVE_GETRLIMIT])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_GETRUSAGE], [/* Define to 1 if you have the \`getrusage' function. */
-#undef HAVE_GETRUSAGE])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_GETTTYENT], [/* Define to 1 if you have the \`getttyent' function. */
-#undef HAVE_GETTTYENT])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_GLOB], [/* Define to 1 if you have the \`glob' function. */
-#undef HAVE_GLOB])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_INET_ATON], [/* Define to 1 if you have the \`inet_aton' function. */
-#undef HAVE_INET_ATON])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_INET_NTOA], [/* Define to 1 if you have the \`inet_ntoa' function. */
-#undef HAVE_INET_NTOA])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_INET_NTOP], [/* Define to 1 if you have the \`inet_ntop' function. */
-#undef HAVE_INET_NTOP])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_INNETGR], [/* Define to 1 if you have the \`innetgr' function. */
-#undef HAVE_INNETGR])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_LOGIN_GETCAPBOOL], [/* Define to 1 if you have the \`login_getcapbool' function. */
-#undef HAVE_LOGIN_GETCAPBOOL])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_MD5_CRYPT], [/* Define to 1 if you have the \`md5_crypt' function. */
-#undef HAVE_MD5_CRYPT])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_MEMMOVE], [/* Define to 1 if you have the \`memmove' function. */
-#undef HAVE_MEMMOVE])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_MKDTEMP], [/* Define to 1 if you have the \`mkdtemp' function. */
-#undef HAVE_MKDTEMP])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_MMAP], [/* Define to 1 if you have the \`mmap' function. */
-#undef HAVE_MMAP])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_NGETADDRINFO], [/* Define to 1 if you have the \`ngetaddrinfo' function. */
-#undef HAVE_NGETADDRINFO])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_NSLEEP], [/* Define to 1 if you have the \`nsleep' function. */
-#undef HAVE_NSLEEP])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_OGETADDRINFO], [/* Define to 1 if you have the \`ogetaddrinfo' function. */
-#undef HAVE_OGETADDRINFO])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_OPENPTY], [/* Define to 1 if you have the \`openpty' function. */
-#undef HAVE_OPENPTY])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_PSTAT], [/* Define to 1 if you have the \`pstat' function. */
-#undef HAVE_PSTAT])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_READPASSPHRASE], [/* Define to 1 if you have the \`readpassphrase' function. */
-#undef HAVE_READPASSPHRASE])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_REALPATH], [/* Define to 1 if you have the \`realpath' function. */
-#undef HAVE_REALPATH])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_RECVMSG], [/* Define to 1 if you have the \`recvmsg' function. */
-#undef HAVE_RECVMSG])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_RRESVPORT_AF], [/* Define to 1 if you have the \`rresvport_af' function. */
-#undef HAVE_RRESVPORT_AF])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SENDMSG], [/* Define to 1 if you have the \`sendmsg' function. */
-#undef HAVE_SENDMSG])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SETDTABLESIZE], [/* Define to 1 if you have the \`setdtablesize' function. */
-#undef HAVE_SETDTABLESIZE])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SETEGID], [/* Define to 1 if you have the \`setegid' function. */
-#undef HAVE_SETEGID])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SETENV], [/* Define to 1 if you have the \`setenv' function. */
-#undef HAVE_SETENV])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SETEUID], [/* Define to 1 if you have the \`seteuid' function. */
-#undef HAVE_SETEUID])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SETGROUPS], [/* Define to 1 if you have the \`setgroups' function. */
-#undef HAVE_SETGROUPS])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SETLOGIN], [/* Define to 1 if you have the \`setlogin' function. */
-#undef HAVE_SETLOGIN])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SETPCRED], [/* Define to 1 if you have the \`setpcred' function. */
-#undef HAVE_SETPCRED])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SETPROCTITLE], [/* Define to 1 if you have the \`setproctitle' function. */
-#undef HAVE_SETPROCTITLE])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SETRESGID], [/* Define to 1 if you have the \`setresgid' function. */
-#undef HAVE_SETRESGID])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SETREUID], [/* Define to 1 if you have the \`setreuid' function. */
-#undef HAVE_SETREUID])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SETRLIMIT], [/* Define to 1 if you have the \`setrlimit' function. */
-#undef HAVE_SETRLIMIT])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SETSID], [/* Define to 1 if you have the \`setsid' function. */
-#undef HAVE_SETSID])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SETVBUF], [/* Define to 1 if you have the \`setvbuf' function. */
-#undef HAVE_SETVBUF])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SIGACTION], [/* Define to 1 if you have the \`sigaction' function. */
-#undef HAVE_SIGACTION])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SIGVEC], [/* Define to 1 if you have the \`sigvec' function. */
-#undef HAVE_SIGVEC])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SNPRINTF], [/* Define to 1 if you have the \`snprintf' function. */
-#undef HAVE_SNPRINTF])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SOCKETPAIR], [/* Define to 1 if you have the \`socketpair' function. */
-#undef HAVE_SOCKETPAIR])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_STRERROR], [/* Define to 1 if you have the \`strerror' function. */
-#undef HAVE_STRERROR])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_STRLCAT], [/* Define to 1 if you have the \`strlcat' function. */
-#undef HAVE_STRLCAT])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_STRLCPY], [/* Define to 1 if you have the \`strlcpy' function. */
-#undef HAVE_STRLCPY])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_STRMODE], [/* Define to 1 if you have the \`strmode' function. */
-#undef HAVE_STRMODE])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_STRNVIS], [/* Define to 1 if you have the \`strnvis' function. */
-#undef HAVE_STRNVIS])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_SYSCONF], [/* Define to 1 if you have the \`sysconf' function. */
-#undef HAVE_SYSCONF])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_TCGETPGRP], [/* Define to 1 if you have the \`tcgetpgrp' function. */
-#undef HAVE_TCGETPGRP])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_TRUNCATE], [/* Define to 1 if you have the \`truncate' function. */
-#undef HAVE_TRUNCATE])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_UTIMES], [/* Define to 1 if you have the \`utimes' function. */
-#undef HAVE_UTIMES])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_VHANGUP], [/* Define to 1 if you have the \`vhangup' function. */
-#undef HAVE_VHANGUP])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_VSNPRINTF], [/* Define to 1 if you have the \`vsnprintf' function. */
-#undef HAVE_VSNPRINTF])
-m4trace:configure.ac:618: -1- AH_OUTPUT([HAVE_WAITPID], [/* Define to 1 if you have the \`waitpid' function. */
-#undef HAVE_WAITPID])
-m4trace:configure.ac:620: -2- AC_DEFINE_TRACE_LITERAL([HAVE_NANOSLEEP])
-m4trace:configure.ac:623: -1- AC_CHECK_FUNCS([strsep])
-m4trace:configure.ac:623: -1- AH_OUTPUT([HAVE_STRSEP], [/* Define to 1 if you have the \`strsep' function. */
-#undef HAVE_STRSEP])
-m4trace:configure.ac:660: -1- AC_CHECK_FUNCS([dirname], [AC_CHECK_HEADERS(libgen.h) ], [
-        AC_CHECK_LIB(gen, dirname,[
-                AC_CACHE_CHECK([for broken dirname],
-                        ac_cv_have_broken_dirname, [
-                        save_LIBS="$LIBS"
-                        LIBS="$LIBS -lgen"
-                        AC_TRY_RUN(
-                                [
-#include <libgen.h>
-#include <string.h>
-
-int main(int argc, char **argv) {
-    char *s, buf[32];
-
-    strncpy(buf,"/etc", 32);
-    s = dirname(buf);
-    if (!s || strncmp(s, "/", 32) != 0) {
-        exit(1);
-    } else {
-        exit(0);
-    }
-}
-                                ],
-                                [ ac_cv_have_broken_dirname="no" ],
-                                [ ac_cv_have_broken_dirname="yes" ]
-                        )
-                        LIBS="$save_LIBS"
-                ])
-                if test "x$ac_cv_have_broken_dirname" = "xno" ; then
-                        LIBS="$LIBS -lgen"
-                        AC_DEFINE(HAVE_DIRNAME)
-                        AC_CHECK_HEADERS(libgen.h)
-                fi
-        ])
-])
-m4trace:configure.ac:660: -1- AH_OUTPUT([HAVE_DIRNAME], [/* Define to 1 if you have the \`dirname' function. */
-#undef HAVE_DIRNAME])
-m4trace:configure.ac:660: -1- AC_CHECK_HEADERS([libgen.h])
-m4trace:configure.ac:660: -1- AH_OUTPUT([HAVE_LIBGEN_H], [/* Define to 1 if you have the <libgen.h> header file. */
-#undef HAVE_LIBGEN_H])
-m4trace:configure.ac:660: -1- AC_CHECK_LIB([gen], [dirname], [
-                AC_CACHE_CHECK([for broken dirname],
-                        ac_cv_have_broken_dirname, [
-                        save_LIBS="$LIBS"
-                        LIBS="$LIBS -lgen"
-                        AC_TRY_RUN(
-                                [
-#include <libgen.h>
-#include <string.h>
-
-int main(int argc, char **argv) {
-    char *s, buf[32];
-
-    strncpy(buf,"/etc", 32);
-    s = dirname(buf);
-    if (!s || strncmp(s, "/", 32) != 0) {
-        exit(1);
-    } else {
-        exit(0);
-    }
-}
-                                ],
-                                [ ac_cv_have_broken_dirname="no" ],
-                                [ ac_cv_have_broken_dirname="yes" ]
-                        )
-                        LIBS="$save_LIBS"
-                ])
-                if test "x$ac_cv_have_broken_dirname" = "xno" ; then
-                        LIBS="$LIBS -lgen"
-                        AC_DEFINE(HAVE_DIRNAME)
-                        AC_CHECK_HEADERS(libgen.h)
-                fi
-        ])
-m4trace:configure.ac:660: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DIRNAME])
-m4trace:configure.ac:660: -1- AC_CHECK_HEADERS([libgen.h])
-m4trace:configure.ac:660: -1- AH_OUTPUT([HAVE_LIBGEN_H], [/* Define to 1 if you have the <libgen.h> header file. */
-#undef HAVE_LIBGEN_H])
-m4trace:configure.ac:663: -1- AC_CHECK_FUNCS([gettimeofday time])
-m4trace:configure.ac:663: -1- AH_OUTPUT([HAVE_GETTIMEOFDAY], [/* Define to 1 if you have the \`gettimeofday' function. */
-#undef HAVE_GETTIMEOFDAY])
-m4trace:configure.ac:663: -1- AH_OUTPUT([HAVE_TIME], [/* Define to 1 if you have the \`time' function. */
-#undef HAVE_TIME])
-m4trace:configure.ac:665: -1- AC_CHECK_FUNCS([endutent getutent getutid getutline pututline setutent])
-m4trace:configure.ac:665: -1- AH_OUTPUT([HAVE_ENDUTENT], [/* Define to 1 if you have the \`endutent' function. */
-#undef HAVE_ENDUTENT])
-m4trace:configure.ac:665: -1- AH_OUTPUT([HAVE_GETUTENT], [/* Define to 1 if you have the \`getutent' function. */
-#undef HAVE_GETUTENT])
-m4trace:configure.ac:665: -1- AH_OUTPUT([HAVE_GETUTID], [/* Define to 1 if you have the \`getutid' function. */
-#undef HAVE_GETUTID])
-m4trace:configure.ac:665: -1- AH_OUTPUT([HAVE_GETUTLINE], [/* Define to 1 if you have the \`getutline' function. */
-#undef HAVE_GETUTLINE])
-m4trace:configure.ac:665: -1- AH_OUTPUT([HAVE_PUTUTLINE], [/* Define to 1 if you have the \`pututline' function. */
-#undef HAVE_PUTUTLINE])
-m4trace:configure.ac:665: -1- AH_OUTPUT([HAVE_SETUTENT], [/* Define to 1 if you have the \`setutent' function. */
-#undef HAVE_SETUTENT])
-m4trace:configure.ac:666: -1- AC_CHECK_FUNCS([utmpname])
-m4trace:configure.ac:666: -1- AH_OUTPUT([HAVE_UTMPNAME], [/* Define to 1 if you have the \`utmpname' function. */
-#undef HAVE_UTMPNAME])
-m4trace:configure.ac:668: -1- AC_CHECK_FUNCS([endutxent getutxent getutxid getutxline pututxline ])
-m4trace:configure.ac:668: -1- AH_OUTPUT([HAVE_ENDUTXENT], [/* Define to 1 if you have the \`endutxent' function. */
-#undef HAVE_ENDUTXENT])
-m4trace:configure.ac:668: -1- AH_OUTPUT([HAVE_GETUTXENT], [/* Define to 1 if you have the \`getutxent' function. */
-#undef HAVE_GETUTXENT])
-m4trace:configure.ac:668: -1- AH_OUTPUT([HAVE_GETUTXID], [/* Define to 1 if you have the \`getutxid' function. */
-#undef HAVE_GETUTXID])
-m4trace:configure.ac:668: -1- AH_OUTPUT([HAVE_GETUTXLINE], [/* Define to 1 if you have the \`getutxline' function. */
-#undef HAVE_GETUTXLINE])
-m4trace:configure.ac:668: -1- AH_OUTPUT([HAVE_PUTUTXLINE], [/* Define to 1 if you have the \`pututxline' function. */
-#undef HAVE_PUTUTXLINE])
-m4trace:configure.ac:669: -1- AC_CHECK_FUNCS([setutxent utmpxname])
-m4trace:configure.ac:669: -1- AH_OUTPUT([HAVE_SETUTXENT], [/* Define to 1 if you have the \`setutxent' function. */
-#undef HAVE_SETUTXENT])
-m4trace:configure.ac:669: -1- AH_OUTPUT([HAVE_UTMPXNAME], [/* Define to 1 if you have the \`utmpxname' function. */
-#undef HAVE_UTMPXNAME])
-m4trace:configure.ac:674: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DAEMON])
-m4trace:configure.ac:674: -1- AC_CHECK_LIB([bsd], [daemon], [LIBS="$LIBS -lbsd"; AC_DEFINE(HAVE_DAEMON)])
-m4trace:configure.ac:674: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DAEMON])
-m4trace:configure.ac:679: -1- AC_DEFINE_TRACE_LITERAL([HAVE_GETPAGESIZE])
-m4trace:configure.ac:679: -1- AC_CHECK_LIB([ucb], [getpagesize], [LIBS="$LIBS -lucb"; AC_DEFINE(HAVE_GETPAGESIZE)])
-m4trace:configure.ac:679: -1- AC_DEFINE_TRACE_LITERAL([HAVE_GETPAGESIZE])
-m4trace:configure.ac:695: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_SNPRINTF])
-m4trace:configure.ac:721: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRICT_MKSTEMP])
-m4trace:configure.ac:721: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRICT_MKSTEMP])
-m4trace:configure.ac:724: -1- AC_FUNC_GETPGRP
-m4trace:configure.ac:724: -1- AC_DEFINE_TRACE_LITERAL([GETPGRP_VOID])
-m4trace:configure.ac:724: -1- AH_OUTPUT([GETPGRP_VOID], [/* Define to 1 if the \`getpgrp' function requires zero arguments. */
-#undef GETPGRP_VOID])
-m4trace:configure.ac:752: -1- AC_CHECK_LIB([dl], [dlopen], [], [])
-m4trace:configure.ac:752: -1- AH_OUTPUT([HAVE_LIBDL], [/* Define to 1 if you have the \`dl' library (-ldl). */
-#undef HAVE_LIBDL])
-m4trace:configure.ac:752: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBDL])
-m4trace:configure.ac:752: -1- AC_CHECK_LIB([pam], [pam_set_item], [], [{ { echo "$as_me:$LINENO: error: *** libpam missing" >&5
-echo "$as_me: error: *** libpam missing" >&2;}
-   { (exit 1); exit 1; }; }])
-m4trace:configure.ac:752: -1- AH_OUTPUT([HAVE_LIBPAM], [/* Define to 1 if you have the \`pam' library (-lpam). */
-#undef HAVE_LIBPAM])
-m4trace:configure.ac:752: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBPAM])
-m4trace:configure.ac:752: -1- AC_CHECK_FUNCS([pam_getenvlist])
-m4trace:configure.ac:752: -1- AH_OUTPUT([HAVE_PAM_GETENVLIST], [/* Define to 1 if you have the \`pam_getenvlist' function. */
-#undef HAVE_PAM_GETENVLIST])
-m4trace:configure.ac:752: -1- AC_DEFINE_TRACE_LITERAL([USE_PAM])
-m4trace:configure.ac:752: -1- AC_SUBST([LIBPAM])
-m4trace:configure.ac:770: -1- AC_DEFINE_TRACE_LITERAL([HAVE_OLD_PAM])
-m4trace:configure.ac:776: -1- AC_CHECK_LIB([crypt], [crypt])
-m4trace:configure.ac:776: -1- AH_OUTPUT([HAVE_LIBCRYPT], [/* Define to 1 if you have the \`crypt' library (-lcrypt). */
-#undef HAVE_LIBCRYPT])
-m4trace:configure.ac:776: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBCRYPT])
-m4trace:configure.ac:808: -2- AC_DEFINE_TRACE_LITERAL([HAVE_OPENSSL])
-m4trace:configure.ac:823: -2- AC_DEFINE_TRACE_LITERAL([HAVE_OPENSSL])
-m4trace:configure.ac:910: -1- AC_CHECK_LIB([crypt], [crypt], [LIBS="$LIBS -lcrypt"])
-m4trace:configure.ac:958: -1- AC_DEFINE_TRACE_LITERAL([OPENSSL_PRNG_ONLY])
-m4trace:configure.ac:966: -1- AC_SUBST([INSTALL_SSH_RAND_HELPER])
-m4trace:configure.ac:989: -1- AC_DEFINE_TRACE_LITERAL([PRNGD_PORT])
-m4trace:configure.ac:1039: -1- AC_DEFINE_TRACE_LITERAL([PRNGD_SOCKET])
-m4trace:configure.ac:1039: -1- AC_DEFINE_TRACE_LITERAL([PRNGD_SOCKET])
-m4trace:configure.ac:1051: -1- AC_DEFINE_TRACE_LITERAL([ENTROPY_TIMEOUT_MSEC])
-m4trace:configure.ac:1062: -1- AC_DEFINE_TRACE_LITERAL([SSH_PRIVSEP_USER])
-m4trace:configure.ac:1063: -1- AC_SUBST([SSH_PRIVSEP_USER])
-m4trace:configure.ac:1080: -1- AC_SUBST([PROG_LS], [$ac_cv_path_PROG_LS])
-m4trace:configure.ac:1080: -1- AC_SUBST([PROG_LS])
-m4trace:configure.ac:1081: -1- AC_SUBST([PROG_NETSTAT], [$ac_cv_path_PROG_NETSTAT])
-m4trace:configure.ac:1081: -1- AC_SUBST([PROG_NETSTAT])
-m4trace:configure.ac:1082: -1- AC_SUBST([PROG_ARP], [$ac_cv_path_PROG_ARP])
-m4trace:configure.ac:1082: -1- AC_SUBST([PROG_ARP])
-m4trace:configure.ac:1083: -1- AC_SUBST([PROG_IFCONFIG], [$ac_cv_path_PROG_IFCONFIG])
-m4trace:configure.ac:1083: -1- AC_SUBST([PROG_IFCONFIG])
-m4trace:configure.ac:1084: -1- AC_SUBST([PROG_JSTAT], [$ac_cv_path_PROG_JSTAT])
-m4trace:configure.ac:1084: -1- AC_SUBST([PROG_JSTAT])
-m4trace:configure.ac:1085: -1- AC_SUBST([PROG_PS], [$ac_cv_path_PROG_PS])
-m4trace:configure.ac:1085: -1- AC_SUBST([PROG_PS])
-m4trace:configure.ac:1086: -1- AC_SUBST([PROG_SAR], [$ac_cv_path_PROG_SAR])
-m4trace:configure.ac:1086: -1- AC_SUBST([PROG_SAR])
-m4trace:configure.ac:1087: -1- AC_SUBST([PROG_W], [$ac_cv_path_PROG_W])
-m4trace:configure.ac:1087: -1- AC_SUBST([PROG_W])
-m4trace:configure.ac:1088: -1- AC_SUBST([PROG_WHO], [$ac_cv_path_PROG_WHO])
-m4trace:configure.ac:1088: -1- AC_SUBST([PROG_WHO])
-m4trace:configure.ac:1089: -1- AC_SUBST([PROG_LAST], [$ac_cv_path_PROG_LAST])
-m4trace:configure.ac:1089: -1- AC_SUBST([PROG_LAST])
-m4trace:configure.ac:1090: -1- AC_SUBST([PROG_LASTLOG], [$ac_cv_path_PROG_LASTLOG])
-m4trace:configure.ac:1090: -1- AC_SUBST([PROG_LASTLOG])
-m4trace:configure.ac:1091: -1- AC_SUBST([PROG_DF], [$ac_cv_path_PROG_DF])
-m4trace:configure.ac:1091: -1- AC_SUBST([PROG_DF])
-m4trace:configure.ac:1092: -1- AC_SUBST([PROG_VMSTAT], [$ac_cv_path_PROG_VMSTAT])
-m4trace:configure.ac:1092: -1- AC_SUBST([PROG_VMSTAT])
-m4trace:configure.ac:1093: -1- AC_SUBST([PROG_UPTIME], [$ac_cv_path_PROG_UPTIME])
-m4trace:configure.ac:1093: -1- AC_SUBST([PROG_UPTIME])
-m4trace:configure.ac:1094: -1- AC_SUBST([PROG_IPCS], [$ac_cv_path_PROG_IPCS])
-m4trace:configure.ac:1094: -1- AC_SUBST([PROG_IPCS])
-m4trace:configure.ac:1095: -1- AC_SUBST([PROG_TAIL], [$ac_cv_path_PROG_TAIL])
-m4trace:configure.ac:1095: -1- AC_SUBST([PROG_TAIL])
-m4trace:configure.ac:1112: -1- AC_SUBST([INSTALL_SSH_PRNG_CMDS])
-m4trace:configure.ac:1121: -1- AC_DEFINE_TRACE_LITERAL([SIZEOF_CHAR])
-m4trace:configure.ac:1121: -1- AH_OUTPUT([SIZEOF_CHAR], [/* The size of a \`char', as computed by sizeof. */
-#undef SIZEOF_CHAR])
-m4trace:configure.ac:1122: -1- AC_DEFINE_TRACE_LITERAL([SIZEOF_SHORT_INT])
-m4trace:configure.ac:1122: -1- AH_OUTPUT([SIZEOF_SHORT_INT], [/* The size of a \`short int', as computed by sizeof. */
-#undef SIZEOF_SHORT_INT])
-m4trace:configure.ac:1123: -1- AC_DEFINE_TRACE_LITERAL([SIZEOF_INT])
-m4trace:configure.ac:1123: -1- AH_OUTPUT([SIZEOF_INT], [/* The size of a \`int', as computed by sizeof. */
-#undef SIZEOF_INT])
-m4trace:configure.ac:1124: -1- AC_DEFINE_TRACE_LITERAL([SIZEOF_LONG_INT])
-m4trace:configure.ac:1124: -1- AH_OUTPUT([SIZEOF_LONG_INT], [/* The size of a \`long int', as computed by sizeof. */
-#undef SIZEOF_LONG_INT])
-m4trace:configure.ac:1125: -1- AC_DEFINE_TRACE_LITERAL([SIZEOF_LONG_LONG_INT])
-m4trace:configure.ac:1125: -1- AH_OUTPUT([SIZEOF_LONG_LONG_INT], [/* The size of a \`long long int', as computed by sizeof. */
-#undef SIZEOF_LONG_LONG_INT])
-m4trace:configure.ac:1142: -1- AC_DEFINE_TRACE_LITERAL([HAVE_U_INT])
-m4trace:configure.ac:1155: -1- AC_DEFINE_TRACE_LITERAL([HAVE_INTXX_T])
-m4trace:configure.ac:1171: -1- AC_DEFINE_TRACE_LITERAL([HAVE_INTXX_T])
-m4trace:configure.ac:1192: -1- AC_DEFINE_TRACE_LITERAL([HAVE_INT64_T])
-m4trace:configure.ac:1204: -1- AC_DEFINE_TRACE_LITERAL([HAVE_U_INTXX_T])
-m4trace:configure.ac:1218: -1- AC_DEFINE_TRACE_LITERAL([HAVE_U_INTXX_T])
-m4trace:configure.ac:1230: -1- AC_DEFINE_TRACE_LITERAL([HAVE_U_INT64_T])
-m4trace:configure.ac:1244: -1- AC_DEFINE_TRACE_LITERAL([HAVE_U_INT64_T])
-m4trace:configure.ac:1259: -1- AC_DEFINE_TRACE_LITERAL([HAVE_UINTXX_T])
-m4trace:configure.ac:1273: -1- AC_DEFINE_TRACE_LITERAL([HAVE_UINTXX_T])
-m4trace:configure.ac:1295: -1- AC_DEFINE_TRACE_LITERAL([HAVE_U_INTXX_T])
-m4trace:configure.ac:1295: -1- AC_DEFINE_TRACE_LITERAL([HAVE_INTXX_T])
-m4trace:configure.ac:1310: -1- AC_DEFINE_TRACE_LITERAL([HAVE_U_CHAR])
-m4trace:configure.ac:1313: -1- AC_DEFINE_TRACE_LITERAL([socklen_t])
-m4trace:configure.ac:1313: -1- AH_OUTPUT([socklen_t], [/* type to use in place of socklen_t if not defined */
-#undef socklen_t])
-m4trace:configure.ac:1315: -1- AC_CHECK_TYPES([sig_atomic_t], [], [], [#include <signal.h>])
-m4trace:configure.ac:1315: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SIG_ATOMIC_T])
-m4trace:configure.ac:1315: -1- AH_OUTPUT([HAVE_SIG_ATOMIC_T], [/* Define to 1 if the system has the type \`sig_atomic_t'. */
-#undef HAVE_SIG_ATOMIC_T])
-m4trace:configure.ac:1328: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SIZE_T])
-m4trace:configure.ac:1342: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SSIZE_T])
-m4trace:configure.ac:1356: -1- AC_DEFINE_TRACE_LITERAL([HAVE_CLOCK_T])
-m4trace:configure.ac:1381: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SA_FAMILY_T])
-m4trace:configure.ac:1395: -1- AC_DEFINE_TRACE_LITERAL([HAVE_PID_T])
-m4trace:configure.ac:1409: -1- AC_DEFINE_TRACE_LITERAL([HAVE_MODE_T])
-m4trace:configure.ac:1425: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_SOCKADDR_STORAGE])
-m4trace:configure.ac:1440: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_SOCKADDR_IN6])
-m4trace:configure.ac:1455: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_IN6_ADDR])
-m4trace:configure.ac:1471: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_ADDRINFO])
-m4trace:configure.ac:1483: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_TIMEVAL])
-m4trace:configure.ac:1487: -1- AC_CHECK_TYPES([struct timespec])
-m4trace:configure.ac:1487: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_TIMESPEC])
-m4trace:configure.ac:1487: -1- AH_OUTPUT([HAVE_STRUCT_TIMESPEC], [/* Define to 1 if the system has the type \`struct timespec'. */
-#undef HAVE_STRUCT_TIMESPEC])
-m4trace:configure.ac:1524: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_SNPRINTF])
-m4trace:configure.ac:1528: -1- AC_DEFINE_TRACE_LITERAL([HAVE_HOST_IN_UTMP])
-m4trace:configure.ac:1529: -1- AC_DEFINE_TRACE_LITERAL([HAVE_HOST_IN_UTMPX])
-m4trace:configure.ac:1530: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SYSLEN_IN_UTMPX])
-m4trace:configure.ac:1531: -1- AC_DEFINE_TRACE_LITERAL([HAVE_PID_IN_UTMP])
-m4trace:configure.ac:1532: -1- AC_DEFINE_TRACE_LITERAL([HAVE_TYPE_IN_UTMP])
-m4trace:configure.ac:1533: -1- AC_DEFINE_TRACE_LITERAL([HAVE_TYPE_IN_UTMPX])
-m4trace:configure.ac:1534: -1- AC_DEFINE_TRACE_LITERAL([HAVE_TV_IN_UTMP])
-m4trace:configure.ac:1535: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ID_IN_UTMP])
-m4trace:configure.ac:1536: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ID_IN_UTMPX])
-m4trace:configure.ac:1537: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ADDR_IN_UTMP])
-m4trace:configure.ac:1538: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ADDR_IN_UTMPX])
-m4trace:configure.ac:1539: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ADDR_V6_IN_UTMP])
-m4trace:configure.ac:1540: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ADDR_V6_IN_UTMPX])
-m4trace:configure.ac:1541: -1- AC_DEFINE_TRACE_LITERAL([HAVE_EXIT_IN_UTMP])
-m4trace:configure.ac:1542: -1- AC_DEFINE_TRACE_LITERAL([HAVE_TIME_IN_UTMP])
-m4trace:configure.ac:1543: -1- AC_DEFINE_TRACE_LITERAL([HAVE_TIME_IN_UTMPX])
-m4trace:configure.ac:1544: -1- AC_DEFINE_TRACE_LITERAL([HAVE_TV_IN_UTMPX])
-m4trace:configure.ac:1546: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_STAT_ST_BLKSIZE])
-m4trace:configure.ac:1546: -1- AH_OUTPUT([HAVE_STRUCT_STAT_ST_BLKSIZE], [/* Define to 1 if \`st_blksize' is member of \`struct stat'. */
-#undef HAVE_STRUCT_STAT_ST_BLKSIZE])
-m4trace:configure.ac:1561: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SS_FAMILY_IN_SS])
-m4trace:configure.ac:1577: -1- AC_DEFINE_TRACE_LITERAL([HAVE___SS_FAMILY_IN_SS])
-m4trace:configure.ac:1592: -1- AC_DEFINE_TRACE_LITERAL([HAVE_PW_CLASS_IN_PASSWD])
-m4trace:configure.ac:1607: -1- AC_DEFINE_TRACE_LITERAL([HAVE_PW_EXPIRE_IN_PASSWD])
-m4trace:configure.ac:1622: -1- AC_DEFINE_TRACE_LITERAL([HAVE_PW_CHANGE_IN_PASSWD])
-m4trace:configure.ac:1647: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ACCRIGHTS_IN_MSGHDR])
-m4trace:configure.ac:1671: -1- AC_DEFINE_TRACE_LITERAL([HAVE_CONTROL_IN_MSGHDR])
-m4trace:configure.ac:1682: -1- AC_DEFINE_TRACE_LITERAL([HAVE___PROGNAME])
-m4trace:configure.ac:1695: -1- AC_DEFINE_TRACE_LITERAL([HAVE___FUNCTION__])
-m4trace:configure.ac:1708: -1- AC_DEFINE_TRACE_LITERAL([HAVE___func__])
-m4trace:configure.ac:1723: -1- AC_DEFINE_TRACE_LITERAL([HAVE_GETOPT_OPTRESET])
-m4trace:configure.ac:1734: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SYS_ERRLIST])
-m4trace:configure.ac:1746: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SYS_NERR])
-m4trace:configure.ac:1779: -1- AC_CHECK_HEADERS([sectok.h])
-m4trace:configure.ac:1779: -1- AH_OUTPUT([HAVE_SECTOK_H], [/* Define to 1 if you have the <sectok.h> header file. */
-#undef HAVE_SECTOK_H])
-m4trace:configure.ac:1779: -1- AC_CHECK_LIB([sectok], [sectok_open])
-m4trace:configure.ac:1779: -1- AH_OUTPUT([HAVE_LIBSECTOK], [/* Define to 1 if you have the \`sectok' library (-lsectok). */
-#undef HAVE_LIBSECTOK])
-m4trace:configure.ac:1779: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBSECTOK])
-m4trace:configure.ac:1779: -1- AC_DEFINE_TRACE_LITERAL([SMARTCARD])
-m4trace:configure.ac:1779: -1- AC_DEFINE_TRACE_LITERAL([USE_SECTOK])
-m4trace:configure.ac:1788: -1- AC_SUBST([OPENSC_CONFIG], [$ac_cv_path_OPENSC_CONFIG])
-m4trace:configure.ac:1794: -1- AC_DEFINE_TRACE_LITERAL([SMARTCARD])
-m4trace:configure.ac:1795: -1- AC_DEFINE_TRACE_LITERAL([USE_OPENSC])
-m4trace:configure.ac:1837: -1- AC_DEFINE_TRACE_LITERAL([KRB5])
-m4trace:configure.ac:1837: -1- AC_DEFINE_TRACE_LITERAL([HEIMDAL])
-m4trace:configure.ac:1837: -1- AC_CHECK_LIB([resolv], [dn_expand], [], [])
-m4trace:configure.ac:1837: -1- AH_OUTPUT([HAVE_LIBRESOLV], [/* Define to 1 if you have the \`resolv' library (-lresolv). */
-#undef HAVE_LIBRESOLV])
-m4trace:configure.ac:1837: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBRESOLV])
-m4trace:configure.ac:1891: -1- AC_CHECK_HEADERS([krb.h])
-m4trace:configure.ac:1891: -1- AH_OUTPUT([HAVE_KRB_H], [/* Define to 1 if you have the <krb.h> header file. */
-#undef HAVE_KRB_H])
-m4trace:configure.ac:1891: -1- AC_CHECK_LIB([krb], [main])
-m4trace:configure.ac:1891: -1- AH_OUTPUT([HAVE_LIBKRB], [/* Define to 1 if you have the \`krb' library (-lkrb). */
-#undef HAVE_LIBKRB])
-m4trace:configure.ac:1891: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBKRB])
-m4trace:configure.ac:1891: -1- AC_CHECK_LIB([krb4], [main])
-m4trace:configure.ac:1891: -1- AH_OUTPUT([HAVE_LIBKRB4], [/* Define to 1 if you have the \`krb4' library (-lkrb4). */
-#undef HAVE_LIBKRB4])
-m4trace:configure.ac:1891: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBKRB4])
-m4trace:configure.ac:1891: -1- AC_CHECK_LIB([des], [des_cbc_encrypt])
-m4trace:configure.ac:1891: -1- AH_OUTPUT([HAVE_LIBDES], [/* Define to 1 if you have the \`des' library (-ldes). */
-#undef HAVE_LIBDES])
-m4trace:configure.ac:1891: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBDES])
-m4trace:configure.ac:1891: -1- AC_CHECK_LIB([des425], [des_cbc_encrypt])
-m4trace:configure.ac:1891: -1- AH_OUTPUT([HAVE_LIBDES425], [/* Define to 1 if you have the \`des425' library (-ldes425). */
-#undef HAVE_LIBDES425])
-m4trace:configure.ac:1891: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBDES425])
-m4trace:configure.ac:1891: -1- AC_CHECK_LIB([resolv], [dn_expand], [], [])
-m4trace:configure.ac:1891: -1- AH_OUTPUT([HAVE_LIBRESOLV], [/* Define to 1 if you have the \`resolv' library (-lresolv). */
-#undef HAVE_LIBRESOLV])
-m4trace:configure.ac:1891: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBRESOLV])
-m4trace:configure.ac:1891: -1- AC_DEFINE_TRACE_LITERAL([KRB4])
-m4trace:configure.ac:1917: -1- AC_DEFINE_TRACE_LITERAL([AFS])
-m4trace:configure.ac:1931: -1- AC_SUBST([PRIVSEP_PATH])
-m4trace:configure.ac:1951: -1- AC_SUBST([xauth_path], [$ac_cv_path_xauth_path])
-m4trace:configure.ac:1962: -1- AC_SUBST([STRIP_OPT])
-m4trace:configure.ac:1966: -1- AC_SUBST([XAUTH_PATH])
-m4trace:configure.ac:1968: -1- AC_DEFINE_TRACE_LITERAL([XAUTH_PATH])
-m4trace:configure.ac:1970: -1- AC_SUBST([XAUTH_PATH])
-m4trace:configure.ac:1976: -1- AC_DEFINE_TRACE_LITERAL([MAIL_DIRECTORY])
-m4trace:configure.ac:1986: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DEV_PTMX])
-m4trace:configure.ac:1994: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DEV_PTS_AND_PTC])
-m4trace:configure.ac:2012: -1- AC_SUBST([NROFF], [$ac_cv_path_NROFF])
-m4trace:configure.ac:2021: -1- AC_SUBST([MANTYPE])
-m4trace:configure.ac:2027: -1- AC_SUBST([mansubdir])
-m4trace:configure.ac:2039: -1- AC_DEFINE_TRACE_LITERAL([HAVE_MD5_PASSWORDS])
-m4trace:configure.ac:2050: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_SHADOW])
-m4trace:configure.ac:2065: -1- AC_DEFINE_TRACE_LITERAL([HAS_SHADOW_EXPIRE])
-m4trace:configure.ac:2074: -1- AC_DEFINE_TRACE_LITERAL([IPADDR_IN_DISPLAY])
-m4trace:configure.ac:2085: -1- AC_DEFINE_TRACE_LITERAL([IPADDR_IN_DISPLAY])
-m4trace:configure.ac:2166: -1- AC_DEFINE_TRACE_LITERAL([USER_PATH])
-m4trace:configure.ac:2167: -1- AC_SUBST([user_path])
-m4trace:configure.ac:2179: -1- AC_DEFINE_TRACE_LITERAL([SUPERUSER_PATH])
-m4trace:configure.ac:2192: -1- AC_DEFINE_TRACE_LITERAL([IPV4_DEFAULT])
-m4trace:configure.ac:2215: -1- AC_DEFINE_TRACE_LITERAL([IPV4_IN_IPV6])
-m4trace:configure.ac:2215: -1- AC_DEFINE_TRACE_LITERAL([IPV4_IN_IPV6])
-m4trace:configure.ac:2227: -1- AC_DEFINE_TRACE_LITERAL([BSD_AUTH])
-m4trace:configure.ac:2251: -1- AC_DEFINE_TRACE_LITERAL([_PATH_SSH_PIDDIR])
-m4trace:configure.ac:2252: -1- AC_SUBST([piddir])
-m4trace:configure.ac:2258: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_LASTLOG])
-m4trace:configure.ac:2262: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMP])
-m4trace:configure.ac:2266: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMPX])
-m4trace:configure.ac:2270: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_WTMP])
-m4trace:configure.ac:2274: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_WTMPX])
-m4trace:configure.ac:2278: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_LOGIN])
-m4trace:configure.ac:2282: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_PUTUTLINE])
-m4trace:configure.ac:2286: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_PUTUTXLINE])
-m4trace:configure.ac:2296: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_LASTLOG])
-m4trace:configure.ac:2358: -1- AC_DEFINE_TRACE_LITERAL([CONF_LASTLOG_FILE])
-m4trace:configure.ac:2383: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMP])
-m4trace:configure.ac:2388: -1- AC_DEFINE_TRACE_LITERAL([CONF_UTMP_FILE])
-m4trace:configure.ac:2413: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_WTMP])
-m4trace:configure.ac:2418: -1- AC_DEFINE_TRACE_LITERAL([CONF_WTMP_FILE])
-m4trace:configure.ac:2443: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMPX])
-m4trace:configure.ac:2446: -1- AC_DEFINE_TRACE_LITERAL([CONF_UTMPX_FILE])
-m4trace:configure.ac:2468: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_WTMPX])
-m4trace:configure.ac:2471: -1- AC_DEFINE_TRACE_LITERAL([CONF_WTMPX_FILE])
-m4trace:configure.ac:2489: -1- AC_CONFIG_FILES([Makefile openbsd-compat/Makefile scard/Makefile ssh_prng_cmds])
diff --git a/autom4te.cache/output.0 b/autom4te.cache/output.0
deleted file mode 100644
index f99b3ba11..000000000
--- a/autom4te.cache/output.0
+++ /dev/null
@@ -1,19182 +0,0 @@
-@%:@! /bin/sh
-@%:@ Guess values for system-dependent variables and create Makefiles.
-@%:@ Generated by GNU Autoconf 2.57.
-@%:@ 
-@%:@ Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
-@%:@ Free Software Foundation, Inc.
-@%:@ This configure script is free software; the Free Software Foundation
-@%:@ gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-
-# Support unset when possible.
-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-         X"$0" : 'X\(//\)$' \| \
-         X"$0" : 'X\(/\)$' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-          /^X\/\(\/\/\)$/{ s//\1/; q; }
-          /^X\/\(\/\).*/{ s//\1/; q; }
-          s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-         case $as_dir in
-         /*)
-           if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-             $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-             $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-             CONFIG_SHELL=$as_dir/$as_base
-             export CONFIG_SHELL
-             exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-           fi;;
-         esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='      ' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS="   $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-exec 6>&1
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_config_libobj_dir=.
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete.  It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-
-ac_unique_file="ssh.c"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#if HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#if HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#if STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# if HAVE_STDLIB_H
-#  include <stdlib.h>
-# endif
-#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
-#  include <memory.h>
-# endif
-# include <string.h>
-#endif
-#if HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#if HAVE_INTTYPES_H
-# include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-#  include <stdint.h>
-# endif
-#endif
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT build build_cpu build_vendor build_os host host_cpu host_vendor host_os CPP RANLIB ac_ct_RANLIB INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA AR PERL SED ENT TEST_MINUS_S_SH SH LOGIN_PROGRAM_FALLBACK LD EGREP LIBWRAP LIBPAM INSTALL_SSH_RAND_HELPER SSH_PRIVSEP_USER PROG_LS PROG_NETSTAT PROG_ARP PROG_IFCONFIG PROG_JSTAT PROG_PS PROG_SAR PROG_W PROG_WHO PROG_LAST PROG_LASTLOG PROG_DF PROG_VMSTAT PROG_UPTIME PROG_IPCS PROG_TAIL INSTALL_SSH_PRNG_CMDS OPENSC_CONFIG PRIVSEP_PATH xauth_path STRIP_OPT XAUTH_PATH NROFF MANTYPE mansubdir user_path piddir LIB@&t@OBJS LTLIBOBJS'
-ac_subst_files=''
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-ac_prev=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_option in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval "enable_$ac_feature=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_$ac_feature='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_$ac_package='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval "with_$ac_package=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; }
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-   { (exit 1); exit 1; }; }
-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-    eval "$ac_envvar='$ac_optarg'"
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
-   { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-              localstatedir libdir includedir oldincludedir infodir mandir
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used." >&2
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$0" : 'X\(//\)[^/]' \| \
-         X"$0" : 'X\(//\)$' \| \
-         X"$0" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-          /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-          /^X\(\/\/\)$/{ s//\1/; q; }
-          /^X\(\/\).*/{ s//\1/; q; }
-          s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-   { (exit 1); exit 1; }; }
-  else
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-  fi
-fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-   { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-_ACEOF
-
-  cat <<_ACEOF
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --infodir=DIR          info documentation [PREFIX/info]
-  --mandir=DIR           man documentation [PREFIX/man]
-_ACEOF
-
-  cat <<\_ACEOF
-
-System types:
-  --build=BUILD     configure for building on BUILD [guessed]
-  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-
-  cat <<\_ACEOF
-
-Optional Features:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --disable-largefile     omit support for large files
-  --disable-strip         Disable calling strip(1) on install
-  --disable-lastlog       disable use of lastlog even if detected no
-  --disable-utmp          disable use of utmp even if detected no
-  --disable-utmpx         disable use of utmpx even if detected no
-  --disable-wtmp          disable use of wtmp even if detected no
-  --disable-wtmpx         disable use of wtmpx even if detected no
-  --disable-libutil       disable use of libutil (login() etc.) no
-  --disable-pututline     disable use of pututline() etc. (uwtmp) no
-  --disable-pututxline    disable use of pututxline() etc. (uwtmpx) no
-
-Optional Packages:
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-osfsia           Enable Digital Unix SIA
-  --with-cflags           Specify additional flags to pass to compiler
-  --with-cppflags         Specify additional flags to pass to preprocessor 
-  --with-ldflags          Specify additional flags to pass to linker
-  --with-libs             Specify additional libraries to link with
-  --without-rpath         Disable auto-added -R linker paths
-  --with-zlib=PATH        Use zlib in PATH
-  --with-skey[=PATH]      Enable S/Key support
-                            (optionally in PATH)
-  --with-tcp-wrappers[=PATH]      Enable tcpwrappers support
-                            (optionally in PATH)
-  --with-pam              Enable PAM support 
-  --with-ssl-dir=PATH     Specify path to OpenSSL installation 
-  --with-rand-helper      Use subprocess to gather strong randomness 
-  --with-prngd-port=PORT  read entropy from PRNGD/EGD TCP localhost:PORT
-  --with-prngd-socket=FILE read entropy from PRNGD/EGD socket FILE (default=/var/run/egd-pool)
-  --with-entropy-timeout  Specify entropy gathering command timeout (msec)
-  --with-privsep-user=user Specify non-privileged user for privilege separation
-  --with-sectok           Enable smartcard support using libsectok
-  --with-opensc=PFX       Enable smartcard support using OpenSC
-  --with-kerberos5=PATH   Enable Kerberos 5 support
-  --with-kerberos4=PATH   Enable Kerberos 4 support
-  --with-afs=PATH         Enable AFS support
-  --with-privsep-path=xxx Path for privilege separation chroot (default=/var/empty)
-  --with-xauth=PATH       Specify path to xauth program 
-  --with-mantype=man|cat|doc  Set man page type
-  --with-md5-passwords    Enable use of MD5 passwords
-  --without-shadow        Disable shadow password support
-  --with-ipaddr-display   Use ip address instead of hostname in \$DISPLAY
-  --with-default-path=    Specify default \$PATH environment for server
-  --with-superuser-path=  Specify different path for super-user
-  --with-ipv4-default     Use IPv4 by connections unless '-6' specified
-  --with-4in6             Check for and convert IPv4 in IPv6 mapped addresses
-  --with-bsd-auth         Enable BSD auth support
-  --with-pid-dir=PATH     Specify location of ssh.pid file
-  --with-lastlog=FILE|DIR specify lastlog location common locations
-
-Some influential environment variables:
-  CC          C compiler command
-  CFLAGS      C compiler flags
-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-              nonstandard directory <lib dir>
-  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
-              headers in a nonstandard directory <include dir>
-  CPP         C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-_ACEOF
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  ac_popdir=`pwd`
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d $ac_dir || continue
-    ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-# absolute.
-ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
-ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-
-    cd $ac_dir
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      echo
-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
-    elif test -f $ac_srcdir/configure; then
-      echo
-      $SHELL $ac_srcdir/configure  --help=recursive
-    elif test -f $ac_srcdir/configure.ac ||
-           test -f $ac_srcdir/configure.in; then
-      echo
-      $ac_configure --help
-    else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi
-    cd $ac_popdir
-  done
-fi
-
-test -n "$ac_init_help" && exit 0
-if $ac_init_version; then
-  cat <<\_ACEOF
-
-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
-Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit 0
-fi
-exec 5>config.log
-cat >&5 <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.57.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-{
-cat <<_ASUNAME
-@%:@@%:@ --------- @%:@@%:@
-@%:@@%:@ Platform. @%:@@%:@
-@%:@@%:@ --------- @%:@@%:@
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
-done
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-@%:@@%:@ ----------- @%:@@%:@
-@%:@@%:@ Core tests. @%:@@%:@
-@%:@@%:@ ----------- @%:@@%:@
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_sep=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *" "*|*"    "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-    2)
-      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-      if test $ac_must_keep_next = true; then
-        ac_must_keep_next=false # Got value, back to normal.
-      else
-        case $ac_arg in
-          *=* | --config-cache | -C | -disable-* | --disable-* \
-          | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-          | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-          | -with-* | --with-* | -without-* | --without-* | --x)
-            case "$ac_configure_args0 " in
-              "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-            esac
-            ;;
-          -* ) ac_must_keep_next=true ;;
-        esac
-      fi
-      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-      # Get rid of the leading space.
-      ac_sep=" "
-      ;;
-    esac
-  done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    cat <<\_ASBOX
-@%:@@%:@ ---------------- @%:@@%:@
-@%:@@%:@ Cache variables. @%:@@%:@
-@%:@@%:@ ---------------- @%:@@%:@
-_ASBOX
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-{
-  (set) 2>&1 |
-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      sed -n \
-        "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-          s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-      ;;
-    *)
-      sed -n \
-        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-      ;;
-    esac;
-}
-    echo
-
-    cat <<\_ASBOX
-@%:@@%:@ ----------------- @%:@@%:@
-@%:@@%:@ Output variables. @%:@@%:@
-@%:@@%:@ ----------------- @%:@@%:@
-_ASBOX
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=$`echo $ac_var`
-      echo "$ac_var='"'"'$ac_val'"'"'"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      cat <<\_ASBOX
-@%:@@%:@ ------------- @%:@@%:@
-@%:@@%:@ Output files. @%:@@%:@
-@%:@@%:@ ------------- @%:@@%:@
-_ASBOX
-      echo
-      for ac_var in $ac_subst_files
-      do
-        eval ac_val=$`echo $ac_var`
-        echo "$ac_var='"'"'$ac_val'"'"'"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      cat <<\_ASBOX
-@%:@@%:@ ----------- @%:@@%:@
-@%:@@%:@ confdefs.h. @%:@@%:@
-@%:@@%:@ ----------- @%:@@%:@
-_ASBOX
-      echo
-      sed "/^$/d" confdefs.h | sort
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core core.* *.core &&
-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-     ' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-@%:@define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-@%:@define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-@%:@define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special
-  # files actually), so we avoid doing that.
-  if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
-    esac
-  fi
-else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
-               sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-  eval ac_new_val="\$ac_env_${ac_var}_value"
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
-        { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-        { echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-        { echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-        ac_cache_corrupted=:
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *" "*|*"    "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-          ac_config_headers="$ac_config_headers config.h"
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $@%:@ != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$ac_ct_CC" && break
-done
-
-  CC=$ac_ct_CC
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output" >&5
-echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-  (eval $ac_link_default) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Find the output, starting from the most likely.  This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-        ;;
-    conftest.$ac_ext )
-        # This is the source file.
-        ;;
-    [ab].out )
-        # We found the default executable, but exeext='' is most
-        # certainly right.
-        break;;
-    *.* )
-        ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-        # FIXME: I believe we export ac_cv_exeext for Libtool,
-        # but it would be cool to find out if it's true.  Does anybody
-        # maintain Libtool? --akim.
-        export ac_cv_exeext
-        break;;
-    * )
-        break;;
-  esac
-done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
-   { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
-
-# Check the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
-  if { ac_try='./$ac_file'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
-        cross_compiling=yes
-    else
-        { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-  fi
-fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-          export ac_cv_exeext
-          break;;
-    * ) break;;
-  esac
-done
-else
-  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-if test "${ac_cv_objext+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
-    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-       break;;
-  esac
-done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_compiler_gnu=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_compiler_gnu=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_prog_cc_g=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_prog_cc_stdc=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX                   -qlanglvl=ansi
-# Ultrix and OSF/1      -std1
-# HP-UX 10.20 and later -Ae
-# HP-UX older versions  -Aa -D_HPUX_SOURCE
-# SVR4                  -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_stdc=$ac_arg
-break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext 
-done
-rm -f conftest.$ac_ext conftest.$ac_objext
-CC=$ac_save_CC
-
-fi
-
-case "x$ac_cv_prog_cc_stdc" in
-  x|xno)
-    echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
-  *)
-    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-    CC="$CC $ac_cv_prog_cc_stdc" ;;
-esac
-
-# Some people use a C++ compiler to compile C.  Since we use `exit',
-# in C++ we need to declare it.  In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-@%:@ifndef __cplusplus
-  choke me
-@%:@endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  for ac_declaration in \
-   ''\
-   '#include <stdlib.h>' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
-do
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@include <stdlib.h>
-$ac_declaration
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
-fi
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f $ac_dir/shtool; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-# Make sure we can run config.sub.
-$ac_config_sub sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
-   { (exit 1); exit 1; }; }
-
-echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6
-if test "${ac_cv_build+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_build_alias=$build_alias
-test -z "$ac_cv_build_alias" &&
-  ac_cv_build_alias=`$ac_config_guess`
-test -z "$ac_cv_build_alias" &&
-  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-   { (exit 1); exit 1; }; }
-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6
-build=$ac_cv_build
-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6
-if test "${ac_cv_host+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_host_alias=$host_alias
-test -z "$ac_cv_host_alias" &&
-  ac_cv_host_alias=$ac_cv_build_alias
-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6
-host=$ac_cv_host
-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-
-echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
-echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6
-if test "${ac_cv_c_bigendian+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # See if sys/param.h defines the BYTE_ORDER macro.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sys/types.h>
-#include <sys/param.h>
-
-int
-main ()
-{
-#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
- bogus endian macros
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  # It does; now see whether it defined to BIG_ENDIAN or not.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sys/types.h>
-#include <sys/param.h>
-
-int
-main ()
-{
-#if BYTE_ORDER != BIG_ENDIAN
- not big endian
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_c_bigendian=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_c_bigendian=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-# It does not; compile a test program.
-if test "$cross_compiling" = yes; then
-  # try to guess the endianness by grepping values into an object file
-  ac_cv_c_bigendian=unknown
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
-short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
-void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; }
-short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
-short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
-void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; }
-int
-main ()
-{
- _ascii (); _ebcdic (); 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then
-  ac_cv_c_bigendian=yes
-fi
-if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
-  if test "$ac_cv_c_bigendian" = unknown; then
-    ac_cv_c_bigendian=no
-  else
-    # finding both strings is unlikely to happen, but who knows?
-    ac_cv_c_bigendian=unknown
-  fi
-fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-int
-main ()
-{
-  /* Are we little or big endian?  From Harbison&Steele.  */
-  union
-  {
-    long l;
-    char c[sizeof (long)];
-  } u;
-  u.l = 1;
-  exit (u.c[sizeof (long) - 1] == 1);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_c_bigendian=no
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_c_bigendian=yes
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
-echo "${ECHO_T}$ac_cv_c_bigendian" >&6
-case $ac_cv_c_bigendian in
-  yes)
-    
-cat >>confdefs.h <<\_ACEOF
-@%:@define WORDS_BIGENDIAN 1
-_ACEOF
- ;;
-  no)
-     ;;
-  *)
-    { { echo "$as_me:$LINENO: error: unknown endianness
-presetting ac_cv_c_bigendian=no (or yes) will help" >&5
-echo "$as_me: error: unknown endianness
-presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-
-
-# Checks for programs.
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-      # Double quotes because CPP needs to be expanded
-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@ifdef __STDC__
-@%:@ include <limits.h>
-@%:@else
-@%:@ include <assert.h>
-@%:@endif
-                     Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether non-existent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  break
-fi
-
-    done
-    ac_cv_prog_CPP=$CPP
-  
-fi
-  CPP=$ac_cv_prog_CPP
-else
-  ac_cv_prog_CPP=$CPP
-fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@ifdef __STDC__
-@%:@ include <limits.h>
-@%:@else
-@%:@ include <assert.h>
-@%:@endif
-                     Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether non-existent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
-else
-  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  RANLIB=$ac_ct_RANLIB
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-        if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-          if test $ac_prog = install &&
-            grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-            # AIX install.  It has an incompatible calling convention.
-            :
-          elif test $ac_prog = install &&
-            grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-            # program-specific install script used by HP pwplus--don't use.
-            :
-          else
-            ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-            break 3
-          fi
-        fi
-      done
-    done
-    ;;
-esac
-done
-
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL=$ac_install_sh
-  fi
-fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-# Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_AR+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $AR in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_AR="$AR" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_AR="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-AR=$ac_cv_path_AR
-
-if test -n "$AR"; then
-  echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-for ac_prog in perl5 perl
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PERL+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PERL in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PERL=$ac_cv_path_PERL
-
-if test -n "$PERL"; then
-  echo "$as_me:$LINENO: result: $PERL" >&5
-echo "${ECHO_T}$PERL" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$PERL" && break
-done
-
-# Extract the first word of "sed", so it can be a program name with args.
-set dummy sed; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_SED+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $SED in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_SED="$SED" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_SED="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-SED=$ac_cv_path_SED
-
-if test -n "$SED"; then
-  echo "$as_me:$LINENO: result: $SED" >&5
-echo "${ECHO_T}$SED" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-# Extract the first word of "ent", so it can be a program name with args.
-set dummy ent; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_ENT+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $ENT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_ENT="$ENT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_ENT="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-ENT=$ac_cv_path_ENT
-
-if test -n "$ENT"; then
-  echo "$as_me:$LINENO: result: $ENT" >&5
-echo "${ECHO_T}$ENT" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-# Extract the first word of "bash", so it can be a program name with args.
-set dummy bash; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_TEST_MINUS_S_SH+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $TEST_MINUS_S_SH in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_TEST_MINUS_S_SH="$TEST_MINUS_S_SH" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_TEST_MINUS_S_SH="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-TEST_MINUS_S_SH=$ac_cv_path_TEST_MINUS_S_SH
-
-if test -n "$TEST_MINUS_S_SH"; then
-  echo "$as_me:$LINENO: result: $TEST_MINUS_S_SH" >&5
-echo "${ECHO_T}$TEST_MINUS_S_SH" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-# Extract the first word of "ksh", so it can be a program name with args.
-set dummy ksh; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_TEST_MINUS_S_SH+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $TEST_MINUS_S_SH in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_TEST_MINUS_S_SH="$TEST_MINUS_S_SH" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_TEST_MINUS_S_SH="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-TEST_MINUS_S_SH=$ac_cv_path_TEST_MINUS_S_SH
-
-if test -n "$TEST_MINUS_S_SH"; then
-  echo "$as_me:$LINENO: result: $TEST_MINUS_S_SH" >&5
-echo "${ECHO_T}$TEST_MINUS_S_SH" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-# Extract the first word of "sh", so it can be a program name with args.
-set dummy sh; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_TEST_MINUS_S_SH+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $TEST_MINUS_S_SH in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_TEST_MINUS_S_SH="$TEST_MINUS_S_SH" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_TEST_MINUS_S_SH="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-TEST_MINUS_S_SH=$ac_cv_path_TEST_MINUS_S_SH
-
-if test -n "$TEST_MINUS_S_SH"; then
-  echo "$as_me:$LINENO: result: $TEST_MINUS_S_SH" >&5
-echo "${ECHO_T}$TEST_MINUS_S_SH" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-# Extract the first word of "sh", so it can be a program name with args.
-set dummy sh; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_SH+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $SH in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_SH="$SH" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_SH="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-SH=$ac_cv_path_SH
-
-if test -n "$SH"; then
-  echo "$as_me:$LINENO: result: $SH" >&5
-echo "${ECHO_T}$SH" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-# System features
-# Check whether --enable-largefile or --disable-largefile was given.
-if test "${enable_largefile+set}" = set; then
-  enableval="$enable_largefile"
-  
-fi; 
-if test "$enable_largefile" != no; then
-
-  echo "$as_me:$LINENO: checking for special C compiler options needed for large files" >&5
-echo $ECHO_N "checking for special C compiler options needed for large files... $ECHO_C" >&6
-if test "${ac_cv_sys_largefile_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_sys_largefile_CC=no
-     if test "$GCC" != yes; then
-       ac_save_CC=$CC
-       while :; do
-         # IRIX 6.2 and later do not support large files by default,
-         # so use the C compiler's -n32 option if that helps.
-         cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
-    We can't simply define LARGE_OFF_T to be 9223372036854775807,
-    since some C++ compilers masquerading as C compilers
-    incorrectly reject 9223372036854775807.  */
-@%:@define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-                       && LARGE_OFF_T % 2147483647 == 1)
-                      ? 1 : -1];
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-         rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext 
-         CC="$CC -n32"
-         rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sys_largefile_CC=' -n32'; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext 
-         break
-       done
-       CC=$ac_save_CC
-       rm -f conftest.$ac_ext
-    fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_CC" >&5
-echo "${ECHO_T}$ac_cv_sys_largefile_CC" >&6
-  if test "$ac_cv_sys_largefile_CC" != no; then
-    CC=$CC$ac_cv_sys_largefile_CC
-  fi
-
-  echo "$as_me:$LINENO: checking for _FILE_OFFSET_BITS value needed for large files" >&5
-echo $ECHO_N "checking for _FILE_OFFSET_BITS value needed for large files... $ECHO_C" >&6
-if test "${ac_cv_sys_file_offset_bits+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  while :; do
-  ac_cv_sys_file_offset_bits=no
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
-    We can't simply define LARGE_OFF_T to be 9223372036854775807,
-    since some C++ compilers masquerading as C compilers
-    incorrectly reject 9223372036854775807.  */
-@%:@define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-                       && LARGE_OFF_T % 2147483647 == 1)
-                      ? 1 : -1];
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@define _FILE_OFFSET_BITS 64
-@%:@include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
-    We can't simply define LARGE_OFF_T to be 9223372036854775807,
-    since some C++ compilers masquerading as C compilers
-    incorrectly reject 9223372036854775807.  */
-@%:@define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-                       && LARGE_OFF_T % 2147483647 == 1)
-                      ? 1 : -1];
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sys_file_offset_bits=64; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  break
-done
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sys_file_offset_bits" >&5
-echo "${ECHO_T}$ac_cv_sys_file_offset_bits" >&6
-if test "$ac_cv_sys_file_offset_bits" != no; then
-  
-cat >>confdefs.h <<_ACEOF
-@%:@define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
-_ACEOF
-
-fi
-rm -f conftest*
-  echo "$as_me:$LINENO: checking for _LARGE_FILES value needed for large files" >&5
-echo $ECHO_N "checking for _LARGE_FILES value needed for large files... $ECHO_C" >&6
-if test "${ac_cv_sys_large_files+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  while :; do
-  ac_cv_sys_large_files=no
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
-    We can't simply define LARGE_OFF_T to be 9223372036854775807,
-    since some C++ compilers masquerading as C compilers
-    incorrectly reject 9223372036854775807.  */
-@%:@define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-                       && LARGE_OFF_T % 2147483647 == 1)
-                      ? 1 : -1];
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@define _LARGE_FILES 1
-@%:@include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
-    We can't simply define LARGE_OFF_T to be 9223372036854775807,
-    since some C++ compilers masquerading as C compilers
-    incorrectly reject 9223372036854775807.  */
-@%:@define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-                       && LARGE_OFF_T % 2147483647 == 1)
-                      ? 1 : -1];
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sys_large_files=1; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  break
-done
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sys_large_files" >&5
-echo "${ECHO_T}$ac_cv_sys_large_files" >&6
-if test "$ac_cv_sys_large_files" != no; then
-  
-cat >>confdefs.h <<_ACEOF
-@%:@define _LARGE_FILES $ac_cv_sys_large_files
-_ACEOF
-
-fi
-rm -f conftest*
-fi
-
-
-if test -z "$AR" ; then
-        { { echo "$as_me:$LINENO: error: *** 'ar' missing, please install or fix your \$PATH ***" >&5
-echo "$as_me: error: *** 'ar' missing, please install or fix your \$PATH ***" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-# Use LOGIN_PROGRAM from environment if possible
-if test ! -z "$LOGIN_PROGRAM" ; then
-        cat >>confdefs.h <<_ACEOF
-@%:@define LOGIN_PROGRAM_FALLBACK "$LOGIN_PROGRAM"
-_ACEOF
-
-else
-        # Search for login
-        # Extract the first word of "login", so it can be a program name with args.
-set dummy login; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_LOGIN_PROGRAM_FALLBACK+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $LOGIN_PROGRAM_FALLBACK in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_LOGIN_PROGRAM_FALLBACK="$LOGIN_PROGRAM_FALLBACK" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_LOGIN_PROGRAM_FALLBACK="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-LOGIN_PROGRAM_FALLBACK=$ac_cv_path_LOGIN_PROGRAM_FALLBACK
-
-if test -n "$LOGIN_PROGRAM_FALLBACK"; then
-  echo "$as_me:$LINENO: result: $LOGIN_PROGRAM_FALLBACK" >&5
-echo "${ECHO_T}$LOGIN_PROGRAM_FALLBACK" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test ! -z "$LOGIN_PROGRAM_FALLBACK" ; then
-                cat >>confdefs.h <<_ACEOF
-@%:@define LOGIN_PROGRAM_FALLBACK "$LOGIN_PROGRAM_FALLBACK"
-_ACEOF
-
-        fi
-fi
-
-if test -z "$LD" ; then
-        LD=$CC
-fi
-
-        
-echo "$as_me:$LINENO: checking for inline" >&5
-echo $ECHO_N "checking for inline... $ECHO_C" >&6
-if test "${ac_cv_c_inline+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_c_inline=no
-for ac_kw in inline __inline__ __inline; do
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifndef __cplusplus
-typedef int foo_t;
-static $ac_kw foo_t static_foo () {return 0; }
-$ac_kw foo_t foo () {return 0; }
-#endif
-
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_c_inline=$ac_kw; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
-echo "${ECHO_T}$ac_cv_c_inline" >&6
-case $ac_cv_c_inline in
-  inline | yes) ;;
-  no) 
-cat >>confdefs.h <<\_ACEOF
-@%:@define inline 
-_ACEOF
- ;;
-  *)  cat >>confdefs.h <<_ACEOF
-@%:@define inline $ac_cv_c_inline
-_ACEOF
- ;;
-esac
-
-if test "$GCC" = "yes" || test "$GCC" = "egcs"; then 
-        CFLAGS="$CFLAGS -Wall -Wpointer-arith -Wno-uninitialized"
-fi
-
-# Check for some target-specific stuff
-case "$host" in
-*-*-aix*)
-        AFS_LIBS="-lld"
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        echo "$as_me:$LINENO: checking how to specify blibpath for linker ($LD)" >&5
-echo $ECHO_N "checking how to specify blibpath for linker ($LD)... $ECHO_C" >&6 
-        if (test -z "$blibpath"); then
-                blibpath="/usr/lib:/lib:/usr/local/lib"
-        fi
-        saved_LDFLAGS="$LDFLAGS"
-        for tryflags in -blibpath: -Wl,-blibpath: -Wl,-rpath, ;do
-                if (test -z "$blibflags"); then
-                        LDFLAGS="$saved_LDFLAGS $tryflags$blibpath"
-                        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  blibflags=$tryflags
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-                fi
-        done
-        if (test -z "$blibflags"); then
-                echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-                { { echo "$as_me:$LINENO: error: *** must be able to specify blibpath on AIX - check config.log" >&5
-echo "$as_me: error: *** must be able to specify blibpath on AIX - check config.log" >&2;}
-   { (exit 1); exit 1; }; }
-        else
-                echo "$as_me:$LINENO: result: $blibflags" >&5
-echo "${ECHO_T}$blibflags" >&6
-        fi
-        LDFLAGS="$saved_LDFLAGS"
-        echo "$as_me:$LINENO: checking for authenticate" >&5
-echo $ECHO_N "checking for authenticate... $ECHO_C" >&6
-if test "${ac_cv_func_authenticate+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char authenticate (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char authenticate ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_authenticate) || defined (__stub___authenticate)
-choke me
-#else
-char (*f) () = authenticate;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != authenticate;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_authenticate=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_authenticate=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_authenticate" >&5
-echo "${ECHO_T}$ac_cv_func_authenticate" >&6
-if test $ac_cv_func_authenticate = yes; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_AIXAUTHENTICATE 1
-_ACEOF
-
-else
-  echo "$as_me:$LINENO: checking for authenticate in -ls" >&5
-echo $ECHO_N "checking for authenticate in -ls... $ECHO_C" >&6
-if test "${ac_cv_lib_s_authenticate+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ls  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char authenticate ();
-int
-main ()
-{
-authenticate ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_s_authenticate=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_s_authenticate=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_s_authenticate" >&5
-echo "${ECHO_T}$ac_cv_lib_s_authenticate" >&6
-if test $ac_cv_lib_s_authenticate = yes; then
-   cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_AIXAUTHENTICATE 1
-_ACEOF
-
-                                LIBS="$LIBS -ls"
-                        
-fi
-
-                
-fi
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_GETADDRINFO 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_REALPATH 1
-_ACEOF
-
-                cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_LASTLOG 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NEEDS_UTMPX 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETPROCTITLE_STRATEGY PS_USE_CLOBBER_ARGV
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETPROCTITLE_PS_PADDING '\0'
-_ACEOF
-
-        ;;
-*-*-cygwin*)
-        check_for_libcrypt_later=1
-        LIBS="$LIBS /usr/lib/textmode.o"
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_CYGWIN 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_SHADOW 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define IPV4_DEFAULT 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define IP_TOS_IS_BROKEN 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define NO_X11_UNIX_SOCKETS 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define NO_IPPORT_RESERVED_CONCEPT 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_FD_PASSING 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETGROUPS_NOOP 1
-_ACEOF
-
-        ;;
-*-*-dgux*)
-        cat >>confdefs.h <<\_ACEOF
-@%:@define IP_TOS_IS_BROKEN 1
-_ACEOF
-
-        ;;
-*-*-darwin*)
-        echo "$as_me:$LINENO: checking if we have working getaddrinfo" >&5
-echo $ECHO_N "checking if we have working getaddrinfo... $ECHO_C" >&6
-        if test "$cross_compiling" = yes; then
-  echo "$as_me:$LINENO: result: assume it is working" >&5
-echo "${ECHO_T}assume it is working" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <mach-o/dyld.h>
-main() { if (NSVersionOfRunTimeLibrary("System") >= (60 << 16))
-                exit(0);
-        else
-                exit(1);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  echo "$as_me:$LINENO: result: working" >&5
-echo "${ECHO_T}working" >&6
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-echo "$as_me:$LINENO: result: buggy" >&5
-echo "${ECHO_T}buggy" >&6
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_GETADDRINFO 1
-_ACEOF
-
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-        ;;
-*-*-hpux10.26)
-        if test -z "$GCC"; then
-                CFLAGS="$CFLAGS -Ae"
-        fi
-        CPPFLAGS="$CPPFLAGS -D_HPUX_SOURCE -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1"
-        IPADDR_IN_DISPLAY=yes
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SECUREWARE 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NO_ENDOPT 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NEEDS_UTMPX 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_SHADOW 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMP 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETPROCTITLE_STRATEGY PS_USE_PSTAT
-_ACEOF
-
-        LIBS="$LIBS -lsec -lsecpw"
-        
-echo "$as_me:$LINENO: checking for t_error in -lxnet" >&5
-echo $ECHO_N "checking for t_error in -lxnet... $ECHO_C" >&6
-if test "${ac_cv_lib_xnet_t_error+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lxnet  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char t_error ();
-int
-main ()
-{
-t_error ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_xnet_t_error=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_xnet_t_error=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_xnet_t_error" >&5
-echo "${ECHO_T}$ac_cv_lib_xnet_t_error" >&6
-if test $ac_cv_lib_xnet_t_error = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBXNET 1
-_ACEOF
-
-  LIBS="-lxnet $LIBS"
-
-else
-  { { echo "$as_me:$LINENO: error: *** -lxnet needed on HP-UX - check config.log ***" >&5
-echo "$as_me: error: *** -lxnet needed on HP-UX - check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-        disable_ptmx_check=yes
-        ;;
-*-*-hpux10*)
-        if test -z "$GCC"; then
-                CFLAGS="$CFLAGS -Ae"
-        fi
-        CPPFLAGS="$CPPFLAGS -D_HPUX_SOURCE -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1"
-        IPADDR_IN_DISPLAY=yes
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NO_ENDOPT 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NEEDS_UTMPX 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_SHADOW 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMP 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETPROCTITLE_STRATEGY PS_USE_PSTAT
-_ACEOF
-
-        LIBS="$LIBS -lsec"
-        
-echo "$as_me:$LINENO: checking for t_error in -lxnet" >&5
-echo $ECHO_N "checking for t_error in -lxnet... $ECHO_C" >&6
-if test "${ac_cv_lib_xnet_t_error+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lxnet  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char t_error ();
-int
-main ()
-{
-t_error ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_xnet_t_error=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_xnet_t_error=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_xnet_t_error" >&5
-echo "${ECHO_T}$ac_cv_lib_xnet_t_error" >&6
-if test $ac_cv_lib_xnet_t_error = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBXNET 1
-_ACEOF
-
-  LIBS="-lxnet $LIBS"
-
-else
-  { { echo "$as_me:$LINENO: error: *** -lxnet needed on HP-UX - check config.log ***" >&5
-echo "$as_me: error: *** -lxnet needed on HP-UX - check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-        ;;
-*-*-hpux11*)
-        CPPFLAGS="$CPPFLAGS -D_HPUX_SOURCE -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1"
-        IPADDR_IN_DISPLAY=yes
-        cat >>confdefs.h <<\_ACEOF
-@%:@define PAM_SUN_CODEBASE 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NO_ENDOPT 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NEEDS_UTMPX 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_SHADOW 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMP 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETPROCTITLE_STRATEGY PS_USE_PSTAT
-_ACEOF
-
-        LIBS="$LIBS -lsec"
-        
-echo "$as_me:$LINENO: checking for t_error in -lxnet" >&5
-echo $ECHO_N "checking for t_error in -lxnet... $ECHO_C" >&6
-if test "${ac_cv_lib_xnet_t_error+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lxnet  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char t_error ();
-int
-main ()
-{
-t_error ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_xnet_t_error=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_xnet_t_error=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_xnet_t_error" >&5
-echo "${ECHO_T}$ac_cv_lib_xnet_t_error" >&6
-if test $ac_cv_lib_xnet_t_error = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBXNET 1
-_ACEOF
-
-  LIBS="-lxnet $LIBS"
-
-else
-  { { echo "$as_me:$LINENO: error: *** -lxnet needed on HP-UX - check config.log ***" >&5
-echo "$as_me: error: *** -lxnet needed on HP-UX - check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-        ;;
-*-*-irix5*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS"
-        PATH="$PATH:/usr/etc"
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_INET_NTOA 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_ABBREV_NO_TTY 1
-_ACEOF
-
-        ;;
-*-*-irix6*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS"
-        PATH="$PATH:/usr/etc"
-        cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_IRIX_ARRAY 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_IRIX_PROJECT 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_IRIX_AUDIT 1
-_ACEOF
-
-        echo "$as_me:$LINENO: checking for jlimit_startjob" >&5
-echo $ECHO_N "checking for jlimit_startjob... $ECHO_C" >&6
-if test "${ac_cv_func_jlimit_startjob+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char jlimit_startjob (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char jlimit_startjob ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_jlimit_startjob) || defined (__stub___jlimit_startjob)
-choke me
-#else
-char (*f) () = jlimit_startjob;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != jlimit_startjob;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_jlimit_startjob=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_jlimit_startjob=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_jlimit_startjob" >&5
-echo "${ECHO_T}$ac_cv_func_jlimit_startjob" >&6
-if test $ac_cv_func_jlimit_startjob = yes; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_IRIX_JOBS 1
-_ACEOF
-
-fi
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_INET_NTOA 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define WITH_ABBREV_NO_TTY 1
-_ACEOF
-
-        ;;
-*-*-linux*)
-        no_dev_ptmx=1
-        check_for_libcrypt_later=1
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DONT_TRY_OTHER_AF 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define PAM_TTY_KLUDGE 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETPROCTITLE_STRATEGY PS_USE_CLOBBER_ARGV
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define SETPROCTITLE_PS_PADDING '\0'
-_ACEOF
-
-        inet6_default_4in6=yes
-        ;;
-mips-sony-bsd|mips-sony-newsos4)
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_NEWS4 1
-_ACEOF
-
-        SONY=1
-        ;;
-*-*-netbsd*)
-        check_for_libcrypt_before=1
-        need_dash_r=1
-        ;;
-*-*-freebsd*)
-        check_for_libcrypt_later=1
-        ;;
-*-next-*)
-        conf_lastlog_location="/usr/adm/lastlog"
-        conf_utmp_location=/etc/utmp
-        conf_wtmp_location=/usr/adm/wtmp
-        MAIL=/usr/spool/mail
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_NEXT 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_REALPATH 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_SAVED_UIDS 1
-_ACEOF
-
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        CFLAGS="$CFLAGS"
-        ;;
-*-*-solaris*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib -R/usr/local/lib" 
-        need_dash_r=1
-        cat >>confdefs.h <<\_ACEOF
-@%:@define PAM_SUN_CODEBASE 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NEEDS_UTMPX 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define LOGIN_NEEDS_TERM 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define PAM_TTY_KLUDGE 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define STREAMS_PUSH_ACQUIRES_CTTY 1
-_ACEOF
-
-        # hardwire lastlog location (can't detect it on some versions)
-        conf_lastlog_location="/var/adm/lastlog"
-        echo "$as_me:$LINENO: checking for obsolete utmp and wtmp in solaris2.x" >&5
-echo $ECHO_N "checking for obsolete utmp and wtmp in solaris2.x... $ECHO_C" >&6
-        sol2ver=`echo "$host"| sed -e 's/.*[0-9]\.//'`
-        if test "$sol2ver" -ge 8; then
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMP 1
-_ACEOF
-
-                cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_WTMP 1
-_ACEOF
-
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-        ;;
-*-*-sunos4*)
-        CPPFLAGS="$CPPFLAGS -DSUNOS4"
-        
-for ac_func in getpwanam
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define PAM_SUN_CODEBASE 1
-_ACEOF
-
-        conf_utmp_location=/etc/utmp
-        conf_wtmp_location=/var/adm/wtmp
-        conf_lastlog_location=/var/adm/lastlog
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        ;;
-*-ncr-sysv*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        LIBS="$LIBS -lc89"
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        ;;
-*-sni-sysv*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        # /usr/ucblib MUST NOT be searched on ReliantUNIX
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        IPADDR_IN_DISPLAY=yes
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define IP_TOS_IS_BROKEN 1
-_ACEOF
-
-        # /usr/ucblib/libucb.a no longer needed on ReliantUNIX
-        # Attention: always take care to bind libsocket and libnsl before libc,
-        # otherwise you will find lots of "SIOCGPGRP errno 22" on syslog
-        ;;
-*-*-sysv4.2*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        ;;
-*-*-sysv5*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        ;;
-*-*-sysv*)
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        ;;
-*-*-sco3.2v4*)
-        CPPFLAGS="$CPPFLAGS -Dftruncate=chsize -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        LIBS="$LIBS -los -lprot -lx -ltinfo -lm"
-        RANLIB=true
-        no_dev_ptmx=1
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_SYS_TERMIO_H 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SECUREWARE 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_SHADOW 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_SAVED_UIDS 1
-_ACEOF
-
-        
-
-for ac_func in getluid setluid
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-        MANTYPE=man
-        do_sco3_extra_lib_check=yes
-        ;;
-*-*-sco3.2v5*)
-        if test -z "$GCC"; then
-                CFLAGS="$CFLAGS -belf"
-        fi
-        CPPFLAGS="$CPPFLAGS -I/usr/local/include"
-        LDFLAGS="$LDFLAGS -L/usr/local/lib"
-        LIBS="$LIBS -lprot -lx -ltinfo -lm"
-        no_dev_ptmx=1
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SECUREWARE 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_SHADOW 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_FD_PASSING 1
-_ACEOF
-
-        
-
-for ac_func in getluid setluid
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-        MANTYPE=man
-        ;;
-*-*-unicosmk*)
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_FD_PASSING 1
-_ACEOF
-
-        LDFLAGS="$LDFLAGS"
-        LIBS="$LIBS -lgen -lrsc -lshare -luex -lacm"
-        MANTYPE=cat
-        ;;
-*-*-unicos*)
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_FD_PASSING 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define NO_SSH_LASTLOG 1
-_ACEOF
-
-        LDFLAGS="$LDFLAGS -Wl,-Dmsglevel=334:fatal"
-        LIBS="$LIBS -lgen -lrsc -lshare -luex -lacm"
-        MANTYPE=cat
-        ;;
-*-dec-osf*)
-        echo "$as_me:$LINENO: checking for Digital Unix SIA" >&5
-echo $ECHO_N "checking for Digital Unix SIA... $ECHO_C" >&6
-        no_osfsia=""
-        
-# Check whether --with-osfsia or --without-osfsia was given.
-if test "${with_osfsia+set}" = set; then
-  withval="$with_osfsia"
-  
-                        if test "x$withval" = "xno" ; then
-                                echo "$as_me:$LINENO: result: disabled" >&5
-echo "${ECHO_T}disabled" >&6
-                                no_osfsia=1
-                        fi
-                
-fi; 
-        if test -z "$no_osfsia" ; then
-                if test -f /etc/sia/matrix.conf; then
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_OSF_SIA 1
-_ACEOF
-
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_LOGIN 1
-_ACEOF
-
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_FD_PASSING 1
-_ACEOF
-
-                        LIBS="$LIBS -lsecurity -ldb -lm -laud"
-                else
-                        echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                fi
-        fi
-        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_FD_PASSING 1
-_ACEOF
-
-        ;;
-
-*-*-nto-qnx)
-        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PIPES 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define NO_X11_UNIX_SOCKETS 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define MISSING_NFDBITS 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define MISSING_HOWMANY 1
-_ACEOF
-
-        cat >>confdefs.h <<\_ACEOF
-@%:@define MISSING_FD_MASK 1
-_ACEOF
-
-        ;;
-esac
-
-# Allow user to specify flags
-
-# Check whether --with-cflags or --without-cflags was given.
-if test "${with_cflags+set}" = set; then
-  withval="$with_cflags"
-  
-                if test "x$withval" != "xno" ; then
-                        CFLAGS="$CFLAGS $withval"
-                fi
-                
-
-fi; 
-
-# Check whether --with-cppflags or --without-cppflags was given.
-if test "${with_cppflags+set}" = set; then
-  withval="$with_cppflags"
-  
-                if test "x$withval" != "xno"; then
-                        CPPFLAGS="$CPPFLAGS $withval"
-                fi
-        
-
-fi; 
-
-# Check whether --with-ldflags or --without-ldflags was given.
-if test "${with_ldflags+set}" = set; then
-  withval="$with_ldflags"
-  
-                if test "x$withval" != "xno" ; then
-                        LDFLAGS="$LDFLAGS $withval"
-                fi
-                
-
-fi; 
-
-# Check whether --with-libs or --without-libs was given.
-if test "${with_libs+set}" = set; then
-  withval="$with_libs"
-  
-                if test "x$withval" != "xno" ; then
-                        LIBS="$LIBS $withval"
-                fi
-                
-
-fi; 
-
-# Checks for header files.
-
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
- 
-
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-if test "${ac_cv_header_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_header_stdc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_header_stdc=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then
-  :
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ctype.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
-                   (('a' <= (c) && (c) <= 'i') \
-                     || ('j' <= (c) && (c) <= 'r') \
-                     || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
-  int i;
-  for (i = 0; i < 256; i++)
-    if (XOR (islower (i), ISLOWER (i))
-        || toupper (i) != TOUPPER (i))
-      exit(2);
-  exit (0);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
-if test $ac_cv_header_stdc = yes; then
-  
-cat >>confdefs.h <<\_ACEOF
-@%:@define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-                  inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-
-@%:@include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_Header=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_Header=no"
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-
-done
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-for ac_header in bstring.h crypt.h endian.h floatingpoint.h \
-        getopt.h glob.h ia.h lastlog.h libgen.h limits.h login.h \
-        login_cap.h maillock.h netdb.h netgroup.h \
-        netinet/in_systm.h paths.h pty.h readpassphrase.h \
-        rpc/types.h security/pam_appl.h shadow.h stddef.h stdint.h \
-        strings.h sys/bitypes.h sys/bsdtty.h sys/cdefs.h \
-        sys/mman.h sys/pstat.h sys/select.h sys/stat.h \
-        sys/stropts.h sys/sysmacros.h sys/time.h sys/timers.h \
-        sys/un.h time.h tmpdir.h ttyent.h usersec.h \
-        util.h utime.h utmp.h utmpx.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-@%:@include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-@%:@@%:@ ------------------------------------ @%:@@%:@
-@%:@@%:@ Report this to bug-autoconf@gnu.org. @%:@@%:@
-@%:@@%:@ ------------------------------------ @%:@@%:@
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-@%:@@%:@ ------------------------------------ @%:@@%:@
-@%:@@%:@ Report this to bug-autoconf@gnu.org. @%:@@%:@
-@%:@@%:@ ------------------------------------ @%:@@%:@
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-
-done
-
-
-# Checks for libraries.
-echo "$as_me:$LINENO: checking for yp_match" >&5
-echo $ECHO_N "checking for yp_match... $ECHO_C" >&6
-if test "${ac_cv_func_yp_match+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char yp_match (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char yp_match ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_yp_match) || defined (__stub___yp_match)
-choke me
-#else
-char (*f) () = yp_match;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != yp_match;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_yp_match=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_yp_match=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_yp_match" >&5
-echo "${ECHO_T}$ac_cv_func_yp_match" >&6
-if test $ac_cv_func_yp_match = yes; then
-  :
-else
-  
-echo "$as_me:$LINENO: checking for yp_match in -lnsl" >&5
-echo $ECHO_N "checking for yp_match in -lnsl... $ECHO_C" >&6
-if test "${ac_cv_lib_nsl_yp_match+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lnsl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char yp_match ();
-int
-main ()
-{
-yp_match ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_nsl_yp_match=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_nsl_yp_match=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_yp_match" >&5
-echo "${ECHO_T}$ac_cv_lib_nsl_yp_match" >&6
-if test $ac_cv_lib_nsl_yp_match = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBNSL 1
-_ACEOF
-
-  LIBS="-lnsl $LIBS"
-
-fi
-
-fi
-
-echo "$as_me:$LINENO: checking for setsockopt" >&5
-echo $ECHO_N "checking for setsockopt... $ECHO_C" >&6
-if test "${ac_cv_func_setsockopt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char setsockopt (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char setsockopt ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_setsockopt) || defined (__stub___setsockopt)
-choke me
-#else
-char (*f) () = setsockopt;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != setsockopt;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_setsockopt=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_setsockopt=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_setsockopt" >&5
-echo "${ECHO_T}$ac_cv_func_setsockopt" >&6
-if test $ac_cv_func_setsockopt = yes; then
-  :
-else
-  
-echo "$as_me:$LINENO: checking for setsockopt in -lsocket" >&5
-echo $ECHO_N "checking for setsockopt in -lsocket... $ECHO_C" >&6
-if test "${ac_cv_lib_socket_setsockopt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsocket  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char setsockopt ();
-int
-main ()
-{
-setsockopt ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_socket_setsockopt=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_socket_setsockopt=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_socket_setsockopt" >&5
-echo "${ECHO_T}$ac_cv_lib_socket_setsockopt" >&6
-if test $ac_cv_lib_socket_setsockopt = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBSOCKET 1
-_ACEOF
-
-  LIBS="-lsocket $LIBS"
-
-fi
-
-fi
-
-
-if test "x$with_tcp_wrappers" != "xno" ; then
-    if test "x$do_sco3_extra_lib_check" = "xyes" ; then
-        echo "$as_me:$LINENO: checking for innetgr in -lrpc" >&5
-echo $ECHO_N "checking for innetgr in -lrpc... $ECHO_C" >&6
-if test "${ac_cv_lib_rpc_innetgr+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lrpc -lyp -lrpc $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char innetgr ();
-int
-main ()
-{
-innetgr ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_rpc_innetgr=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_rpc_innetgr=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_rpc_innetgr" >&5
-echo "${ECHO_T}$ac_cv_lib_rpc_innetgr" >&6
-if test $ac_cv_lib_rpc_innetgr = yes; then
-  LIBS="-lrpc -lyp -lrpc $LIBS" 
-fi
-
-    fi
-fi
-
-echo "$as_me:$LINENO: checking for getspnam" >&5
-echo $ECHO_N "checking for getspnam... $ECHO_C" >&6
-if test "${ac_cv_func_getspnam+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char getspnam (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char getspnam ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_getspnam) || defined (__stub___getspnam)
-choke me
-#else
-char (*f) () = getspnam;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != getspnam;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_getspnam=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_getspnam=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_getspnam" >&5
-echo "${ECHO_T}$ac_cv_func_getspnam" >&6
-if test $ac_cv_func_getspnam = yes; then
-  :
-else
-  echo "$as_me:$LINENO: checking for getspnam in -lgen" >&5
-echo $ECHO_N "checking for getspnam in -lgen... $ECHO_C" >&6
-if test "${ac_cv_lib_gen_getspnam+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgen  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char getspnam ();
-int
-main ()
-{
-getspnam ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_gen_getspnam=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_gen_getspnam=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_gen_getspnam" >&5
-echo "${ECHO_T}$ac_cv_lib_gen_getspnam" >&6
-if test $ac_cv_lib_gen_getspnam = yes; then
-  LIBS="$LIBS -lgen"
-fi
-
-fi
-
-
-
-# Check whether --with-rpath or --without-rpath was given.
-if test "${with_rpath+set}" = set; then
-  withval="$with_rpath"
-  
-                if test "x$withval" = "xno" ; then      
-                        need_dash_r=""
-                fi
-                if test "x$withval" = "xyes" ; then
-                        need_dash_r=1
-                fi
-        
-
-fi; 
-
-
-# Check whether --with-zlib or --without-zlib was given.
-if test "${with_zlib+set}" = set; then
-  withval="$with_zlib"
-  
-                if test "x$withval" = "xno" ; then
-                        { { echo "$as_me:$LINENO: error: *** zlib is required ***" >&5
-echo "$as_me: error: *** zlib is required ***" >&2;}
-   { (exit 1); exit 1; }; }
-                fi
-                if test -d "$withval/lib"; then
-                        if test -n "${need_dash_r}"; then
-                                LDFLAGS="-L${withval}/lib -R${withval}/lib ${LDFLAGS}"
-                        else
-                                LDFLAGS="-L${withval}/lib ${LDFLAGS}"
-                        fi
-                else
-                        if test -n "${need_dash_r}"; then
-                                LDFLAGS="-L${withval} -R${withval} ${LDFLAGS}"
-                        else
-                                LDFLAGS="-L${withval} ${LDFLAGS}"
-                        fi
-                fi
-                if test -d "$withval/include"; then
-                        CPPFLAGS="-I${withval}/include ${CPPFLAGS}"
-                else
-                        CPPFLAGS="-I${withval} ${CPPFLAGS}"
-                fi
-        
-
-fi; 
-
-
-echo "$as_me:$LINENO: checking for deflate in -lz" >&5
-echo $ECHO_N "checking for deflate in -lz... $ECHO_C" >&6
-if test "${ac_cv_lib_z_deflate+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lz  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char deflate ();
-int
-main ()
-{
-deflate ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_z_deflate=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_z_deflate=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_z_deflate" >&5
-echo "${ECHO_T}$ac_cv_lib_z_deflate" >&6
-if test $ac_cv_lib_z_deflate = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBZ 1
-_ACEOF
-
-  LIBS="-lz $LIBS"
-
-else
-  { { echo "$as_me:$LINENO: error: *** zlib missing - please install first or check config.log ***" >&5
-echo "$as_me: error: *** zlib missing - please install first or check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-
-echo "$as_me:$LINENO: checking for strcasecmp" >&5
-echo $ECHO_N "checking for strcasecmp... $ECHO_C" >&6
-if test "${ac_cv_func_strcasecmp+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char strcasecmp (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char strcasecmp ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_strcasecmp) || defined (__stub___strcasecmp)
-choke me
-#else
-char (*f) () = strcasecmp;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != strcasecmp;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_strcasecmp=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_strcasecmp=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_strcasecmp" >&5
-echo "${ECHO_T}$ac_cv_func_strcasecmp" >&6
-if test $ac_cv_func_strcasecmp = yes; then
-  :
-else
-   echo "$as_me:$LINENO: checking for strcasecmp in -lresolv" >&5
-echo $ECHO_N "checking for strcasecmp in -lresolv... $ECHO_C" >&6
-if test "${ac_cv_lib_resolv_strcasecmp+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lresolv  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char strcasecmp ();
-int
-main ()
-{
-strcasecmp ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_resolv_strcasecmp=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_resolv_strcasecmp=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_strcasecmp" >&5
-echo "${ECHO_T}$ac_cv_lib_resolv_strcasecmp" >&6
-if test $ac_cv_lib_resolv_strcasecmp = yes; then
-  LIBS="$LIBS -lresolv"
-fi
- 
-
-fi
-
-echo "$as_me:$LINENO: checking for utimes" >&5
-echo $ECHO_N "checking for utimes... $ECHO_C" >&6
-if test "${ac_cv_func_utimes+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char utimes (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char utimes ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_utimes) || defined (__stub___utimes)
-choke me
-#else
-char (*f) () = utimes;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != utimes;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_utimes=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_utimes=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_utimes" >&5
-echo "${ECHO_T}$ac_cv_func_utimes" >&6
-if test $ac_cv_func_utimes = yes; then
-  :
-else
-   echo "$as_me:$LINENO: checking for utimes in -lc89" >&5
-echo $ECHO_N "checking for utimes in -lc89... $ECHO_C" >&6
-if test "${ac_cv_lib_c89_utimes+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lc89  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char utimes ();
-int
-main ()
-{
-utimes ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_c89_utimes=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_c89_utimes=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_c89_utimes" >&5
-echo "${ECHO_T}$ac_cv_lib_c89_utimes" >&6
-if test $ac_cv_lib_c89_utimes = yes; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_UTIMES 1
-_ACEOF
-
-                                        LIBS="$LIBS -lc89"
-fi
- 
-
-fi
-
-
-
-for ac_header in libutil.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-@%:@include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-@%:@@%:@ ------------------------------------ @%:@@%:@
-@%:@@%:@ Report this to bug-autoconf@gnu.org. @%:@@%:@
-@%:@@%:@ ------------------------------------ @%:@@%:@
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-@%:@@%:@ ------------------------------------ @%:@@%:@
-@%:@@%:@ Report this to bug-autoconf@gnu.org. @%:@@%:@
-@%:@@%:@ ------------------------------------ @%:@@%:@
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-
-done
-
-echo "$as_me:$LINENO: checking for library containing login" >&5
-echo $ECHO_N "checking for library containing login... $ECHO_C" >&6
-if test "${ac_cv_search_login+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_func_search_save_LIBS=$LIBS
-ac_cv_search_login=no
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char login ();
-int
-main ()
-{
-login ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_login="none required"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-if test "$ac_cv_search_login" = no; then
-  for ac_lib in util bsd; do
-    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char login ();
-int
-main ()
-{
-login ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_login="-l$ac_lib"
-break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-  done
-fi
-LIBS=$ac_func_search_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_search_login" >&5
-echo "${ECHO_T}$ac_cv_search_login" >&6
-if test "$ac_cv_search_login" != no; then
-  test "$ac_cv_search_login" = "none required" || LIBS="$ac_cv_search_login $LIBS"
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_LOGIN 1
-_ACEOF
-
-fi
-
-
-
-
-for ac_func in logout updwtmp logwtmp
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-
-for ac_func in strftime
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-else
-  # strftime is in -lintl on SCO UNIX.
-echo "$as_me:$LINENO: checking for strftime in -lintl" >&5
-echo $ECHO_N "checking for strftime in -lintl... $ECHO_C" >&6
-if test "${ac_cv_lib_intl_strftime+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lintl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char strftime ();
-int
-main ()
-{
-strftime ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_intl_strftime=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_intl_strftime=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_intl_strftime" >&5
-echo "${ECHO_T}$ac_cv_lib_intl_strftime" >&6
-if test $ac_cv_lib_intl_strftime = yes; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRFTIME 1
-_ACEOF
-
-LIBS="-lintl $LIBS"
-fi
-
-fi
-done
-
-
-# Check for ALTDIRFUNC glob() extension
-echo "$as_me:$LINENO: checking for GLOB_ALTDIRFUNC support" >&5
-echo $ECHO_N "checking for GLOB_ALTDIRFUNC support... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-                #include <glob.h>
-                #ifdef GLOB_ALTDIRFUNC
-                FOUNDIT
-                #endif
-        
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "FOUNDIT" >/dev/null 2>&1; then
-  
-                cat >>confdefs.h <<\_ACEOF
-@%:@define GLOB_HAS_ALTDIRFUNC 1
-_ACEOF
-
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-        
-else
-  
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        
-
-fi
-rm -f conftest*
-
-
-# Check for g.gl_matchc glob() extension
-echo "$as_me:$LINENO: checking for gl_matchc field in glob_t" >&5
-echo $ECHO_N "checking for gl_matchc field in glob_t... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-                #include <glob.h>
-                int main(void){glob_t g; g.gl_matchc = 1;}
-        
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "FOUNDIT" >/dev/null 2>&1; then
-  
-                cat >>confdefs.h <<\_ACEOF
-@%:@define GLOB_HAS_GL_MATCHC 1
-_ACEOF
-
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-        
-else
-  
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        
-
-fi
-rm -f conftest*
-
-
-echo "$as_me:$LINENO: checking whether struct dirent allocates space for d_name" >&5
-echo $ECHO_N "checking whether struct dirent allocates space for d_name... $ECHO_C" >&6
-if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <dirent.h>
-int main(void){struct dirent d;exit(sizeof(d.d_name)<=sizeof(char));}
-        
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_ONE_BYTE_DIRENT_D_NAME 1
-_ACEOF
-
-        
-
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-# Check whether user wants S/Key support
-SKEY_MSG="no" 
-
-# Check whether --with-skey or --without-skey was given.
-if test "${with_skey+set}" = set; then
-  withval="$with_skey"
-  
-                if test "x$withval" != "xno" ; then
-
-                        if test "x$withval" != "xyes" ; then
-                                CPPFLAGS="$CPPFLAGS -I${withval}/include"
-                                LDFLAGS="$LDFLAGS -L${withval}/lib"
-                        fi
-
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define SKEY 1
-_ACEOF
-
-                        LIBS="-lskey $LIBS"
-                        SKEY_MSG="yes" 
-        
-                        echo "$as_me:$LINENO: checking for s/key support" >&5
-echo $ECHO_N "checking for s/key support... $ECHO_C" >&6
-                        if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <stdio.h>
-#include <skey.h>
-int main() { char *ff = skey_keyinfo(""); ff=""; exit(0); }
-                                
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-
-                                        echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                                        { { echo "$as_me:$LINENO: error: ** Incomplete or missing s/key libraries." >&5
-echo "$as_me: error: ** Incomplete or missing s/key libraries." >&2;}
-   { (exit 1); exit 1; }; }
-                                
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-                fi
-        
-
-fi; 
-
-# Check whether user wants TCP wrappers support
-TCPW_MSG="no"
-
-# Check whether --with-tcp-wrappers or --without-tcp-wrappers was given.
-if test "${with_tcp_wrappers+set}" = set; then
-  withval="$with_tcp_wrappers"
-  
-                if test "x$withval" != "xno" ; then
-                        saved_LIBS="$LIBS"
-                        saved_LDFLAGS="$LDFLAGS"
-                        saved_CPPFLAGS="$CPPFLAGS"
-                        if test -n "${withval}" -a "${withval}" != "yes"; then
-                                if test -d "${withval}/lib"; then
-                                        if test -n "${need_dash_r}"; then
-                                                LDFLAGS="-L${withval}/lib -R${withval}/lib ${LDFLAGS}"
-                                        else
-                                                LDFLAGS="-L${withval}/lib ${LDFLAGS}"
-                                        fi
-                                else
-                                        if test -n "${need_dash_r}"; then
-                                                LDFLAGS="-L${withval} -R${withval} ${LDFLAGS}"
-                                        else
-                                                LDFLAGS="-L${withval} ${LDFLAGS}"
-                                        fi
-                                fi
-                                if test -d "${withval}/include"; then
-                                        CPPFLAGS="-I${withval}/include ${CPPFLAGS}"
-                                else
-                                        CPPFLAGS="-I${withval} ${CPPFLAGS}"
-                                fi
-                        fi
-                        LIBWRAP="-lwrap"
-                        LIBS="$LIBWRAP $LIBS"
-                        echo "$as_me:$LINENO: checking for libwrap" >&5
-echo $ECHO_N "checking for libwrap... $ECHO_C" >&6
-                        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <tcpd.h>
-                                        int deny_severity = 0, allow_severity = 0;
-                                
-int
-main ()
-{
-hosts_access(0);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                                        cat >>confdefs.h <<\_ACEOF
-@%:@define LIBWRAP 1
-_ACEOF
-
-                                        
-                                        TCPW_MSG="yes"
-                                
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-                                        { { echo "$as_me:$LINENO: error: *** libwrap missing" >&5
-echo "$as_me: error: *** libwrap missing" >&2;}
-   { (exit 1); exit 1; }; }
-                                
-                        
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-                        LIBS="$saved_LIBS"
-                fi
-        
-
-fi; 
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-for ac_func in \
-        arc4random __b64_ntop b64_ntop __b64_pton b64_pton basename bcopy \
-        bindresvport_sa clock fchmod fchown freeaddrinfo futimes \
-        gai_strerror getaddrinfo getcwd getgrouplist getnameinfo getopt \
-        getpeereid _getpty getrlimit getrusage getttyent glob inet_aton \
-        inet_ntoa inet_ntop innetgr login_getcapbool md5_crypt memmove \
-        mkdtemp mmap ngetaddrinfo nsleep ogetaddrinfo openpty pstat \
-        readpassphrase realpath recvmsg rresvport_af sendmsg setdtablesize \
-        setegid setenv seteuid setgroups setlogin setpcred setproctitle \
-        setresgid setreuid setrlimit setsid setvbuf sigaction sigvec \
-        snprintf socketpair strerror strlcat strlcpy strmode strnvis \
-        sysconf tcgetpgrp truncate utimes vhangup vsnprintf waitpid \
-
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-echo "$as_me:$LINENO: checking for library containing nanosleep" >&5
-echo $ECHO_N "checking for library containing nanosleep... $ECHO_C" >&6
-if test "${ac_cv_search_nanosleep+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_func_search_save_LIBS=$LIBS
-ac_cv_search_nanosleep=no
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char nanosleep ();
-int
-main ()
-{
-nanosleep ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_nanosleep="none required"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-if test "$ac_cv_search_nanosleep" = no; then
-  for ac_lib in rt posix4; do
-    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char nanosleep ();
-int
-main ()
-{
-nanosleep ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_nanosleep="-l$ac_lib"
-break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-  done
-fi
-LIBS=$ac_func_search_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_search_nanosleep" >&5
-echo "${ECHO_T}$ac_cv_search_nanosleep" >&6
-if test "$ac_cv_search_nanosleep" != no; then
-  test "$ac_cv_search_nanosleep" = "none required" || LIBS="$ac_cv_search_nanosleep $LIBS"
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_NANOSLEEP 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for library containing basename" >&5
-echo $ECHO_N "checking for library containing basename... $ECHO_C" >&6
-if test "${ac_cv_search_basename+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_func_search_save_LIBS=$LIBS
-ac_cv_search_basename=no
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char basename ();
-int
-main ()
-{
-basename ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_basename="none required"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-if test "$ac_cv_search_basename" = no; then
-  for ac_lib in gen; do
-    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char basename ();
-int
-main ()
-{
-basename ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_basename="-l$ac_lib"
-break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-  done
-fi
-LIBS=$ac_func_search_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_search_basename" >&5
-echo "${ECHO_T}$ac_cv_search_basename" >&6
-if test "$ac_cv_search_basename" != no; then
-  test "$ac_cv_search_basename" = "none required" || LIBS="$ac_cv_search_basename $LIBS"
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_BASENAME 1
-_ACEOF
-
-fi
-
-
-echo "$as_me:$LINENO: checking whether strsep is declared" >&5
-echo $ECHO_N "checking whether strsep is declared... $ECHO_C" >&6
-if test "${ac_cv_have_decl_strsep+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-#ifndef strsep
-  char *p = (char *) strsep;
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_have_decl_strsep=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_have_decl_strsep=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_decl_strsep" >&5
-echo "${ECHO_T}$ac_cv_have_decl_strsep" >&6
-if test $ac_cv_have_decl_strsep = yes; then
-  
-for ac_func in strsep
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-fi
-
-
-
-for ac_func in dirname
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-for ac_header in libgen.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-@%:@include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-@%:@@%:@ ------------------------------------ @%:@@%:@
-@%:@@%:@ Report this to bug-autoconf@gnu.org. @%:@@%:@
-@%:@@%:@ ------------------------------------ @%:@@%:@
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-@%:@@%:@ ------------------------------------ @%:@@%:@
-@%:@@%:@ Report this to bug-autoconf@gnu.org. @%:@@%:@
-@%:@@%:@ ------------------------------------ @%:@@%:@
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-
-done
- 
-else
-  
-        echo "$as_me:$LINENO: checking for dirname in -lgen" >&5
-echo $ECHO_N "checking for dirname in -lgen... $ECHO_C" >&6
-if test "${ac_cv_lib_gen_dirname+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgen  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dirname ();
-int
-main ()
-{
-dirname ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_gen_dirname=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_gen_dirname=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_gen_dirname" >&5
-echo "${ECHO_T}$ac_cv_lib_gen_dirname" >&6
-if test $ac_cv_lib_gen_dirname = yes; then
-  
-                echo "$as_me:$LINENO: checking for broken dirname" >&5
-echo $ECHO_N "checking for broken dirname... $ECHO_C" >&6
-if test "${ac_cv_have_broken_dirname+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                        save_LIBS="$LIBS"
-                        LIBS="$LIBS -lgen"
-                        if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <libgen.h>
-#include <string.h>
-
-int main(int argc, char **argv) {
-    char *s, buf[32];
-
-    strncpy(buf,"/etc", 32);
-    s = dirname(buf);
-    if (!s || strncmp(s, "/", 32) != 0) {
-        exit(1);
-    } else {
-        exit(0);
-    }
-}
-                                
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_broken_dirname="no" 
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
- ac_cv_have_broken_dirname="yes" 
-                        
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-                        LIBS="$save_LIBS"
-                
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_broken_dirname" >&5
-echo "${ECHO_T}$ac_cv_have_broken_dirname" >&6
-                if test "x$ac_cv_have_broken_dirname" = "xno" ; then
-                        LIBS="$LIBS -lgen"
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_DIRNAME 1
-_ACEOF
-
-                        
-for ac_header in libgen.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-@%:@include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-@%:@@%:@ ------------------------------------ @%:@@%:@
-@%:@@%:@ Report this to bug-autoconf@gnu.org. @%:@@%:@
-@%:@@%:@ ------------------------------------ @%:@@%:@
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-@%:@@%:@ ------------------------------------ @%:@@%:@
-@%:@@%:@ Report this to bug-autoconf@gnu.org. @%:@@%:@
-@%:@@%:@ ------------------------------------ @%:@@%:@
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-
-done
-
-                fi
-        
-fi
-
-
-fi
-done
-
-
-
-
-for ac_func in gettimeofday time
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-
-
-
-
-
-for ac_func in endutent getutent getutid getutline pututline setutent
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-for ac_func in utmpname
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-
-
-
-
-for ac_func in endutxent getutxent getutxid getutxline pututxline 
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-
-for ac_func in setutxent utmpxname
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-echo "$as_me:$LINENO: checking for daemon" >&5
-echo $ECHO_N "checking for daemon... $ECHO_C" >&6
-if test "${ac_cv_func_daemon+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char daemon (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char daemon ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_daemon) || defined (__stub___daemon)
-choke me
-#else
-char (*f) () = daemon;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != daemon;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_daemon=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_daemon=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_daemon" >&5
-echo "${ECHO_T}$ac_cv_func_daemon" >&6
-if test $ac_cv_func_daemon = yes; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_DAEMON 1
-_ACEOF
-
-else
-  echo "$as_me:$LINENO: checking for daemon in -lbsd" >&5
-echo $ECHO_N "checking for daemon in -lbsd... $ECHO_C" >&6
-if test "${ac_cv_lib_bsd_daemon+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lbsd  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char daemon ();
-int
-main ()
-{
-daemon ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_bsd_daemon=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_bsd_daemon=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_daemon" >&5
-echo "${ECHO_T}$ac_cv_lib_bsd_daemon" >&6
-if test $ac_cv_lib_bsd_daemon = yes; then
-  LIBS="$LIBS -lbsd"; cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_DAEMON 1
-_ACEOF
-
-fi
-
-
-fi
-
-
-echo "$as_me:$LINENO: checking for getpagesize" >&5
-echo $ECHO_N "checking for getpagesize... $ECHO_C" >&6
-if test "${ac_cv_func_getpagesize+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char getpagesize (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char getpagesize ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_getpagesize) || defined (__stub___getpagesize)
-choke me
-#else
-char (*f) () = getpagesize;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != getpagesize;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_getpagesize=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_getpagesize=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_getpagesize" >&5
-echo "${ECHO_T}$ac_cv_func_getpagesize" >&6
-if test $ac_cv_func_getpagesize = yes; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_GETPAGESIZE 1
-_ACEOF
-
-else
-  echo "$as_me:$LINENO: checking for getpagesize in -lucb" >&5
-echo $ECHO_N "checking for getpagesize in -lucb... $ECHO_C" >&6
-if test "${ac_cv_lib_ucb_getpagesize+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lucb  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char getpagesize ();
-int
-main ()
-{
-getpagesize ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_ucb_getpagesize=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_ucb_getpagesize=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_ucb_getpagesize" >&5
-echo "${ECHO_T}$ac_cv_lib_ucb_getpagesize" >&6
-if test $ac_cv_lib_ucb_getpagesize = yes; then
-  LIBS="$LIBS -lucb"; cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_GETPAGESIZE 1
-_ACEOF
-
-fi
-
-
-fi
-
-
-# Check for broken snprintf
-if test "x$ac_cv_func_snprintf" = "xyes" ; then
-        echo "$as_me:$LINENO: checking whether snprintf correctly terminates long strings" >&5
-echo $ECHO_N "checking whether snprintf correctly terminates long strings... $ECHO_C" >&6
-        if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <stdio.h>
-int main(void){char b[5];snprintf(b,5,"123456789");exit(b[4]!='\0');}
-                
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-
-                        echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_SNPRINTF 1
-_ACEOF
-
-                        { echo "$as_me:$LINENO: WARNING: ****** Your snprintf() function is broken, complain to your vendor" >&5
-echo "$as_me: WARNING: ****** Your snprintf() function is broken, complain to your vendor" >&2;}
-                
-        
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-
-if test "x$ac_cv_func_mkdtemp" = "xyes" ; then
-echo "$as_me:$LINENO: checking for (overly) strict mkstemp" >&5
-echo $ECHO_N "checking for (overly) strict mkstemp... $ECHO_C" >&6
-if test "$cross_compiling" = yes; then
-  
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRICT_MKSTEMP 1
-_ACEOF
-
-         
-
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <stdlib.h>
-main() { char template[]="conftest.mkstemp-test";
-if (mkstemp(template) == -1)
-        exit(1);
-unlink(template); exit(0);
-}
-        
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
- 
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRICT_MKSTEMP 1
-_ACEOF
-
-        
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-
-echo "$as_me:$LINENO: checking whether getpgrp requires zero arguments" >&5
-echo $ECHO_N "checking whether getpgrp requires zero arguments... $ECHO_C" >&6
-if test "${ac_cv_func_getpgrp_void+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # Use it with a single arg.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-getpgrp (0);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_getpgrp_void=no
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func_getpgrp_void=yes
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func_getpgrp_void" >&5
-echo "${ECHO_T}$ac_cv_func_getpgrp_void" >&6
-if test $ac_cv_func_getpgrp_void = yes; then
-  
-cat >>confdefs.h <<\_ACEOF
-@%:@define GETPGRP_VOID 1
-_ACEOF
-
-fi
-
-
-# Check for PAM libs
-PAM_MSG="no"
-
-# Check whether --with-pam or --without-pam was given.
-if test "${with_pam+set}" = set; then
-  withval="$with_pam"
-  
-                if test "x$withval" != "xno" ; then
-                        if test "x$ac_cv_header_security_pam_appl_h" != "xyes" ; then
-                                { { echo "$as_me:$LINENO: error: PAM headers not found" >&5
-echo "$as_me: error: PAM headers not found" >&2;}
-   { (exit 1); exit 1; }; }
-                        fi
-
-                        
-echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dlopen ();
-int
-main ()
-{
-dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_dl_dlopen=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
-if test $ac_cv_lib_dl_dlopen = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBDL 1
-_ACEOF
-
-  LIBS="-ldl $LIBS"
-
-fi
-
-                        
-echo "$as_me:$LINENO: checking for pam_set_item in -lpam" >&5
-echo $ECHO_N "checking for pam_set_item in -lpam... $ECHO_C" >&6
-if test "${ac_cv_lib_pam_pam_set_item+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpam  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char pam_set_item ();
-int
-main ()
-{
-pam_set_item ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_pam_pam_set_item=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_pam_pam_set_item=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_pam_pam_set_item" >&5
-echo "${ECHO_T}$ac_cv_lib_pam_pam_set_item" >&6
-if test $ac_cv_lib_pam_pam_set_item = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBPAM 1
-_ACEOF
-
-  LIBS="-lpam $LIBS"
-
-else
-  { { echo "$as_me:$LINENO: error: *** libpam missing" >&5
-echo "$as_me: error: *** libpam missing" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-                        
-for ac_func in pam_getenvlist
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-done
-
-
-                        disable_shadow=yes
-                        PAM_MSG="yes"
-
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_PAM 1
-_ACEOF
-
-                        if test $ac_cv_lib_dl_dlopen = yes; then
-                                LIBPAM="-lpam -ldl"
-                        else
-                                LIBPAM="-lpam"
-                        fi
-                        
-                fi
-        
-
-fi; 
-
-# Check for older PAM
-if test "x$PAM_MSG" = "xyes" ; then
-        # Check PAM strerror arguments (old PAM)
-        echo "$as_me:$LINENO: checking whether pam_strerror takes only one argument" >&5
-echo $ECHO_N "checking whether pam_strerror takes only one argument... $ECHO_C" >&6
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <stdlib.h>
-#include <security/pam_appl.h>
-                
-int
-main ()
-{
-(void)pam_strerror((pam_handle_t *)NULL, -1);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_OLD_PAM 1
-_ACEOF
-
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                        PAM_MSG="yes (old library)"
-                
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-
-# Some systems want crypt() from libcrypt, *not* the version in OpenSSL,
-# because the system crypt() is more featureful.
-if test "x$check_for_libcrypt_before" = "x1"; then
-        
-echo "$as_me:$LINENO: checking for crypt in -lcrypt" >&5
-echo $ECHO_N "checking for crypt in -lcrypt... $ECHO_C" >&6
-if test "${ac_cv_lib_crypt_crypt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lcrypt  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char crypt ();
-int
-main ()
-{
-crypt ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_crypt_crypt=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_crypt_crypt=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_crypt_crypt" >&5
-echo "${ECHO_T}$ac_cv_lib_crypt_crypt" >&6
-if test $ac_cv_lib_crypt_crypt = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBCRYPT 1
-_ACEOF
-
-  LIBS="-lcrypt $LIBS"
-
-fi
-
-fi
-
-# Search for OpenSSL
-saved_CPPFLAGS="$CPPFLAGS"
-saved_LDFLAGS="$LDFLAGS"
-
-# Check whether --with-ssl-dir or --without-ssl-dir was given.
-if test "${with_ssl_dir+set}" = set; then
-  withval="$with_ssl_dir"
-  
-                if test "x$withval" != "xno" ; then
-                        if test -d "$withval/lib"; then
-                                if test -n "${need_dash_r}"; then
-                                        LDFLAGS="-L${withval}/lib -R${withval}/lib ${LDFLAGS}"
-                                else
-                                        LDFLAGS="-L${withval}/lib ${LDFLAGS}"
-                                fi
-                        else
-                                if test -n "${need_dash_r}"; then
-                                        LDFLAGS="-L${withval} -R${withval} ${LDFLAGS}"
-                                else
-                                        LDFLAGS="-L${withval} ${LDFLAGS}"
-                                fi
-                        fi
-                        if test -d "$withval/include"; then
-                                CPPFLAGS="-I${withval}/include ${CPPFLAGS}"
-                        else
-                                CPPFLAGS="-I${withval} ${CPPFLAGS}"
-                        fi
-                fi
-        
-
-fi; 
-LIBS="$LIBS -lcrypto"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char RAND_add ();
-int
-main ()
-{
-RAND_add ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_OPENSSL 1
-_ACEOF
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-                                if test -n "${need_dash_r}"; then
-                        LDFLAGS="-L/usr/local/ssl/lib -R/usr/local/ssl/lib ${saved_LDFLAGS}"
-                else
-                        LDFLAGS="-L/usr/local/ssl/lib ${saved_LDFLAGS}"
-                fi
-                CPPFLAGS="-I/usr/local/ssl/include ${saved_CPPFLAGS}"
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char RAND_add ();
-int
-main ()
-{
-RAND_add ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_OPENSSL 1
-_ACEOF
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-                                { { echo "$as_me:$LINENO: error: *** Can't find recent OpenSSL libcrypto (see config.log for details) ***" >&5
-echo "$as_me: error: *** Can't find recent OpenSSL libcrypto (see config.log for details) ***" >&2;}
-   { (exit 1); exit 1; }; }
-                        
-                
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-        
-
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-# Determine OpenSSL header version
-echo "$as_me:$LINENO: checking OpenSSL header version" >&5
-echo $ECHO_N "checking OpenSSL header version... $ECHO_C" >&6
-if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <stdio.h>
-#include <string.h>
-#include <openssl/opensslv.h>
-#define DATA "conftest.sslincver"
-int main(void) {
-        FILE *fd;
-        int rc;
-
-        fd = fopen(DATA,"w");
-        if(fd == NULL)
-                exit(1);
-
-        if ((rc = fprintf(fd ,"%x (%s)\n", OPENSSL_VERSION_NUMBER, OPENSSL_VERSION_TEXT)) <0)
-                exit(1);
-
-        exit(0);
-}
-        
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                ssl_header_ver=`cat conftest.sslincver`
-                echo "$as_me:$LINENO: result: $ssl_header_ver" >&5
-echo "${ECHO_T}$ssl_header_ver" >&6
-        
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-
-                echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-                { { echo "$as_me:$LINENO: error: OpenSSL version header not found." >&5
-echo "$as_me: error: OpenSSL version header not found." >&2;}
-   { (exit 1); exit 1; }; }
-        
-
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-# Determine OpenSSL library version
-echo "$as_me:$LINENO: checking OpenSSL library version" >&5
-echo $ECHO_N "checking OpenSSL library version... $ECHO_C" >&6
-if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <stdio.h>
-#include <string.h>
-#include <openssl/opensslv.h>
-#include <openssl/crypto.h>
-#define DATA "conftest.ssllibver"
-int main(void) {
-        FILE *fd;
-        int rc;
-
-        fd = fopen(DATA,"w");
-        if(fd == NULL)
-                exit(1);
-
-        if ((rc = fprintf(fd ,"%x (%s)\n", SSLeay(), SSLeay_version(SSLEAY_VERSION))) <0)
-                exit(1);
-
-        exit(0);
-}
-        
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                ssl_library_ver=`cat conftest.ssllibver`
-                echo "$as_me:$LINENO: result: $ssl_library_ver" >&5
-echo "${ECHO_T}$ssl_library_ver" >&6
-        
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-
-                echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-                { { echo "$as_me:$LINENO: error: OpenSSL library not found." >&5
-echo "$as_me: error: OpenSSL library not found." >&2;}
-   { (exit 1); exit 1; }; }
-        
-
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-# Sanity check OpenSSL headers
-echo "$as_me:$LINENO: checking whether OpenSSL's headers match the library" >&5
-echo $ECHO_N "checking whether OpenSSL's headers match the library... $ECHO_C" >&6
-if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <string.h>
-#include <openssl/opensslv.h>
-int main(void) { exit(SSLeay() == OPENSSL_VERSION_NUMBER ? 0 : 1); }
-        
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-        
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                { { echo "$as_me:$LINENO: error: Your OpenSSL headers do not match your library" >&5
-echo "$as_me: error: Your OpenSSL headers do not match your library" >&2;}
-   { (exit 1); exit 1; }; }
-        
-
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-# Some Linux systems (Slackware) need crypt() from libcrypt, *not* the 
-# version in OpenSSL. Skip this for PAM
-if test "x$PAM_MSG" = "xno" -a "x$check_for_libcrypt_later" = "x1"; then
-        echo "$as_me:$LINENO: checking for crypt in -lcrypt" >&5
-echo $ECHO_N "checking for crypt in -lcrypt... $ECHO_C" >&6
-if test "${ac_cv_lib_crypt_crypt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lcrypt  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char crypt ();
-int
-main ()
-{
-crypt ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_crypt_crypt=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_crypt_crypt=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_crypt_crypt" >&5
-echo "${ECHO_T}$ac_cv_lib_crypt_crypt" >&6
-if test $ac_cv_lib_crypt_crypt = yes; then
-  LIBS="$LIBS -lcrypt"
-fi
-
-fi
-
-
-### Configure cryptographic random number support
-
-# Check wheter OpenSSL seeds itself
-echo "$as_me:$LINENO: checking whether OpenSSL's PRNG is internally seeded" >&5
-echo $ECHO_N "checking whether OpenSSL's PRNG is internally seeded... $ECHO_C" >&6
-if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <string.h>
-#include <openssl/rand.h>
-int main(void) { exit(RAND_status() == 1 ? 0 : 1); }
-        
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                OPENSSL_SEEDS_ITSELF=yes
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-        
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                # Default to use of the rand helper if OpenSSL doesn't
-                # seed itself
-                USE_RAND_HELPER=yes
-        
-
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-# Do we want to force the use of the rand helper?
-
-# Check whether --with-rand-helper or --without-rand-helper was given.
-if test "${with_rand_helper+set}" = set; then
-  withval="$with_rand_helper"
-  
-                if test "x$withval" = "xno" ; then
-                        # Force use of OpenSSL's internal RNG, even if 
-                        # the previous test showed it to be unseeded.
-                        if test -z "$OPENSSL_SEEDS_ITSELF" ; then
-                                { echo "$as_me:$LINENO: WARNING: *** Forcing use of OpenSSL's non-self-seeding PRNG" >&5
-echo "$as_me: WARNING: *** Forcing use of OpenSSL's non-self-seeding PRNG" >&2;}
-                                OPENSSL_SEEDS_ITSELF=yes
-                                USE_RAND_HELPER=""
-                        fi
-                else
-                        USE_RAND_HELPER=yes
-                fi
-        
-fi;     
-
-# Which randomness source do we use?
-if test ! -z "$OPENSSL_SEEDS_ITSELF" -a -z "$USE_RAND_HELPER" ; then
-        # OpenSSL only
-        cat >>confdefs.h <<\_ACEOF
-@%:@define OPENSSL_PRNG_ONLY 1
-_ACEOF
-
-        RAND_MSG="OpenSSL internal ONLY"
-        INSTALL_SSH_RAND_HELPER=""
-elif test ! -z "$USE_RAND_HELPER" ; then
-        # install rand helper
-        RAND_MSG="ssh-rand-helper"
-        INSTALL_SSH_RAND_HELPER="yes"
-fi
-
-
-### Configuration of ssh-rand-helper
-
-# PRNGD TCP socket
-
-# Check whether --with-prngd-port or --without-prngd-port was given.
-if test "${with_prngd_port+set}" = set; then
-  withval="$with_prngd_port"
-  
-                case "$withval" in
-                no)
-                        withval=""
-                        ;;
-                [0-9]*)
-                        ;;
-                *)
-                        { { echo "$as_me:$LINENO: error: You must specify a numeric port number for --with-prngd-port" >&5
-echo "$as_me: error: You must specify a numeric port number for --with-prngd-port" >&2;}
-   { (exit 1); exit 1; }; }
-                        ;;
-                esac
-                if test ! -z "$withval" ; then
-                        PRNGD_PORT="$withval"
-                        cat >>confdefs.h <<_ACEOF
-@%:@define PRNGD_PORT $PRNGD_PORT
-_ACEOF
-
-                fi
-        
-
-fi; 
-
-# PRNGD Unix domain socket
-
-# Check whether --with-prngd-socket or --without-prngd-socket was given.
-if test "${with_prngd_socket+set}" = set; then
-  withval="$with_prngd_socket"
-  
-                case "$withval" in
-                yes)
-                        withval="/var/run/egd-pool"
-                        ;;
-                no)
-                        withval=""
-                        ;;
-                /*)
-                        ;;
-                *)
-                        { { echo "$as_me:$LINENO: error: You must specify an absolute path to the entropy socket" >&5
-echo "$as_me: error: You must specify an absolute path to the entropy socket" >&2;}
-   { (exit 1); exit 1; }; }
-                        ;;
-                esac
-
-                if test ! -z "$withval" ; then
-                        if test ! -z "$PRNGD_PORT" ; then
-                                { { echo "$as_me:$LINENO: error: You may not specify both a PRNGD/EGD port and socket" >&5
-echo "$as_me: error: You may not specify both a PRNGD/EGD port and socket" >&2;}
-   { (exit 1); exit 1; }; }
-                        fi
-                        if test ! -r "$withval" ; then
-                                { echo "$as_me:$LINENO: WARNING: Entropy socket is not readable" >&5
-echo "$as_me: WARNING: Entropy socket is not readable" >&2;}
-                        fi
-                        PRNGD_SOCKET="$withval"
-                        cat >>confdefs.h <<_ACEOF
-@%:@define PRNGD_SOCKET "$PRNGD_SOCKET"
-_ACEOF
-
-                fi
-        
-else
-  
-                # Check for existing socket only if we don't have a random device already
-                if test "$USE_RAND_HELPER" = yes ; then
-                        echo "$as_me:$LINENO: checking for PRNGD/EGD socket" >&5
-echo $ECHO_N "checking for PRNGD/EGD socket... $ECHO_C" >&6
-                        # Insert other locations here
-                        for sock in /var/run/egd-pool /dev/egd-pool /etc/entropy; do
-                                if test -r $sock && $TEST_MINUS_S_SH -c "test -S $sock -o -p $sock" ; then
-                                        PRNGD_SOCKET="$sock"
-                                        cat >>confdefs.h <<_ACEOF
-@%:@define PRNGD_SOCKET "$PRNGD_SOCKET"
-_ACEOF
-
-                                        break;
-                                fi
-                        done
-                        if test ! -z "$PRNGD_SOCKET" ; then
-                                echo "$as_me:$LINENO: result: $PRNGD_SOCKET" >&5
-echo "${ECHO_T}$PRNGD_SOCKET" >&6
-                        else
-                                echo "$as_me:$LINENO: result: not found" >&5
-echo "${ECHO_T}not found" >&6
-                        fi
-                fi
-        
-
-fi; 
-
-# Change default command timeout for hashing entropy source
-entropy_timeout=200
-
-# Check whether --with-entropy-timeout or --without-entropy-timeout was given.
-if test "${with_entropy_timeout+set}" = set; then
-  withval="$with_entropy_timeout"
-  
-                if test "x$withval" != "xno" ; then
-                        entropy_timeout=$withval
-                fi
-                
-
-fi; 
-cat >>confdefs.h <<_ACEOF
-@%:@define ENTROPY_TIMEOUT_MSEC $entropy_timeout
-_ACEOF
-
-
-SSH_PRIVSEP_USER=sshd
-
-# Check whether --with-privsep-user or --without-privsep-user was given.
-if test "${with_privsep_user+set}" = set; then
-  withval="$with_privsep_user"
-  
-                if test -n "$withval"; then
-                        SSH_PRIVSEP_USER=$withval
-                fi
-                
-
-fi; 
-cat >>confdefs.h <<_ACEOF
-@%:@define SSH_PRIVSEP_USER "$SSH_PRIVSEP_USER"
-_ACEOF
-
-
-
-# We do this little dance with the search path to insure
-# that programs that we select for use by installed programs
-# (which may be run by the super-user) come from trusted
-# locations before they come from the user's private area.
-# This should help avoid accidentally configuring some
-# random version of a program in someone's personal bin.
-
-OPATH=$PATH
-PATH=/bin:/usr/bin
-test -h /bin 2> /dev/null && PATH=/usr/bin
-test -d /sbin && PATH=$PATH:/sbin
-test -d /usr/sbin && PATH=$PATH:/usr/sbin
-PATH=$PATH:/etc:$OPATH
-
-# These programs are used by the command hashing source to gather entropy 
-
-        # Extract the first word of "ls", so it can be a program name with args.
-set dummy ls; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_LS+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_LS in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_LS="$PROG_LS" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_LS="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_LS=$ac_cv_path_PROG_LS
-
-if test -n "$PROG_LS"; then
-  echo "$as_me:$LINENO: result: $PROG_LS" >&5
-echo "${ECHO_T}$PROG_LS" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_LS" ; then
-                PROG_LS="undef"
-        fi
-        
-
-
-        # Extract the first word of "netstat", so it can be a program name with args.
-set dummy netstat; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_NETSTAT+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_NETSTAT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_NETSTAT="$PROG_NETSTAT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_NETSTAT="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_NETSTAT=$ac_cv_path_PROG_NETSTAT
-
-if test -n "$PROG_NETSTAT"; then
-  echo "$as_me:$LINENO: result: $PROG_NETSTAT" >&5
-echo "${ECHO_T}$PROG_NETSTAT" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_NETSTAT" ; then
-                PROG_NETSTAT="undef"
-        fi
-        
-
-
-        # Extract the first word of "arp", so it can be a program name with args.
-set dummy arp; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_ARP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_ARP in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_ARP="$PROG_ARP" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_ARP="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_ARP=$ac_cv_path_PROG_ARP
-
-if test -n "$PROG_ARP"; then
-  echo "$as_me:$LINENO: result: $PROG_ARP" >&5
-echo "${ECHO_T}$PROG_ARP" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_ARP" ; then
-                PROG_ARP="undef"
-        fi
-        
-
-
-        # Extract the first word of "ifconfig", so it can be a program name with args.
-set dummy ifconfig; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_IFCONFIG+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_IFCONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_IFCONFIG="$PROG_IFCONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_IFCONFIG="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_IFCONFIG=$ac_cv_path_PROG_IFCONFIG
-
-if test -n "$PROG_IFCONFIG"; then
-  echo "$as_me:$LINENO: result: $PROG_IFCONFIG" >&5
-echo "${ECHO_T}$PROG_IFCONFIG" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_IFCONFIG" ; then
-                PROG_IFCONFIG="undef"
-        fi
-        
-
-
-        # Extract the first word of "jstat", so it can be a program name with args.
-set dummy jstat; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_JSTAT+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_JSTAT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_JSTAT="$PROG_JSTAT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_JSTAT="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_JSTAT=$ac_cv_path_PROG_JSTAT
-
-if test -n "$PROG_JSTAT"; then
-  echo "$as_me:$LINENO: result: $PROG_JSTAT" >&5
-echo "${ECHO_T}$PROG_JSTAT" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_JSTAT" ; then
-                PROG_JSTAT="undef"
-        fi
-        
-
-
-        # Extract the first word of "ps", so it can be a program name with args.
-set dummy ps; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_PS+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_PS in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_PS="$PROG_PS" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_PS="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_PS=$ac_cv_path_PROG_PS
-
-if test -n "$PROG_PS"; then
-  echo "$as_me:$LINENO: result: $PROG_PS" >&5
-echo "${ECHO_T}$PROG_PS" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_PS" ; then
-                PROG_PS="undef"
-        fi
-        
-
-
-        # Extract the first word of "sar", so it can be a program name with args.
-set dummy sar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_SAR+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_SAR in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_SAR="$PROG_SAR" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_SAR="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_SAR=$ac_cv_path_PROG_SAR
-
-if test -n "$PROG_SAR"; then
-  echo "$as_me:$LINENO: result: $PROG_SAR" >&5
-echo "${ECHO_T}$PROG_SAR" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_SAR" ; then
-                PROG_SAR="undef"
-        fi
-        
-
-
-        # Extract the first word of "w", so it can be a program name with args.
-set dummy w; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_W+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_W in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_W="$PROG_W" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_W="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_W=$ac_cv_path_PROG_W
-
-if test -n "$PROG_W"; then
-  echo "$as_me:$LINENO: result: $PROG_W" >&5
-echo "${ECHO_T}$PROG_W" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_W" ; then
-                PROG_W="undef"
-        fi
-        
-
-
-        # Extract the first word of "who", so it can be a program name with args.
-set dummy who; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_WHO+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_WHO in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_WHO="$PROG_WHO" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_WHO="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_WHO=$ac_cv_path_PROG_WHO
-
-if test -n "$PROG_WHO"; then
-  echo "$as_me:$LINENO: result: $PROG_WHO" >&5
-echo "${ECHO_T}$PROG_WHO" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_WHO" ; then
-                PROG_WHO="undef"
-        fi
-        
-
-
-        # Extract the first word of "last", so it can be a program name with args.
-set dummy last; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_LAST+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_LAST in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_LAST="$PROG_LAST" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_LAST="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_LAST=$ac_cv_path_PROG_LAST
-
-if test -n "$PROG_LAST"; then
-  echo "$as_me:$LINENO: result: $PROG_LAST" >&5
-echo "${ECHO_T}$PROG_LAST" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_LAST" ; then
-                PROG_LAST="undef"
-        fi
-        
-
-
-        # Extract the first word of "lastlog", so it can be a program name with args.
-set dummy lastlog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_LASTLOG+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_LASTLOG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_LASTLOG="$PROG_LASTLOG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_LASTLOG="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_LASTLOG=$ac_cv_path_PROG_LASTLOG
-
-if test -n "$PROG_LASTLOG"; then
-  echo "$as_me:$LINENO: result: $PROG_LASTLOG" >&5
-echo "${ECHO_T}$PROG_LASTLOG" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_LASTLOG" ; then
-                PROG_LASTLOG="undef"
-        fi
-        
-
-
-        # Extract the first word of "df", so it can be a program name with args.
-set dummy df; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_DF+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_DF in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_DF="$PROG_DF" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_DF="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_DF=$ac_cv_path_PROG_DF
-
-if test -n "$PROG_DF"; then
-  echo "$as_me:$LINENO: result: $PROG_DF" >&5
-echo "${ECHO_T}$PROG_DF" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_DF" ; then
-                PROG_DF="undef"
-        fi
-        
-
-
-        # Extract the first word of "vmstat", so it can be a program name with args.
-set dummy vmstat; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_VMSTAT+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_VMSTAT in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_VMSTAT="$PROG_VMSTAT" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_VMSTAT="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_VMSTAT=$ac_cv_path_PROG_VMSTAT
-
-if test -n "$PROG_VMSTAT"; then
-  echo "$as_me:$LINENO: result: $PROG_VMSTAT" >&5
-echo "${ECHO_T}$PROG_VMSTAT" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_VMSTAT" ; then
-                PROG_VMSTAT="undef"
-        fi
-        
-
-
-        # Extract the first word of "uptime", so it can be a program name with args.
-set dummy uptime; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_UPTIME+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_UPTIME in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_UPTIME="$PROG_UPTIME" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_UPTIME="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_UPTIME=$ac_cv_path_PROG_UPTIME
-
-if test -n "$PROG_UPTIME"; then
-  echo "$as_me:$LINENO: result: $PROG_UPTIME" >&5
-echo "${ECHO_T}$PROG_UPTIME" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_UPTIME" ; then
-                PROG_UPTIME="undef"
-        fi
-        
-
-
-        # Extract the first word of "ipcs", so it can be a program name with args.
-set dummy ipcs; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_IPCS+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_IPCS in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_IPCS="$PROG_IPCS" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_IPCS="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_IPCS=$ac_cv_path_PROG_IPCS
-
-if test -n "$PROG_IPCS"; then
-  echo "$as_me:$LINENO: result: $PROG_IPCS" >&5
-echo "${ECHO_T}$PROG_IPCS" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_IPCS" ; then
-                PROG_IPCS="undef"
-        fi
-        
-
-
-        # Extract the first word of "tail", so it can be a program name with args.
-set dummy tail; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PROG_TAIL+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $PROG_TAIL in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PROG_TAIL="$PROG_TAIL" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PROG_TAIL="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-PROG_TAIL=$ac_cv_path_PROG_TAIL
-
-if test -n "$PROG_TAIL"; then
-  echo "$as_me:$LINENO: result: $PROG_TAIL" >&5
-echo "${ECHO_T}$PROG_TAIL" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-        if test -z "$PROG_TAIL" ; then
-                PROG_TAIL="undef"
-        fi
-        
-
-# restore PATH
-PATH=$OPATH
-
-# Where does ssh-rand-helper get its randomness from?
-INSTALL_SSH_PRNG_CMDS=""
-if test ! -z "$INSTALL_SSH_RAND_HELPER" ; then
-        if test ! -z "$PRNGD_PORT" ; then
-                RAND_HELPER_MSG="TCP localhost:$PRNGD_PORT"
-        elif test ! -z "$PRNGD_SOCKET" ; then
-                RAND_HELPER_MSG="Unix domain socket \"$PRNGD_SOCKET\""
-        else
-                RAND_HELPER_MSG="Command hashing (timeout $entropy_timeout)"
-                RAND_HELPER_CMDHASH=yes
-                INSTALL_SSH_PRNG_CMDS="yes"
-        fi
-fi
-
-
-
-# Cheap hack to ensure NEWS-OS libraries are arranged right.
-if test ! -z "$SONY" ; then
-  LIBS="$LIBS -liberty";
-fi
-
-# Checks for data types
-echo "$as_me:$LINENO: checking for char" >&5
-echo $ECHO_N "checking for char... $ECHO_C" >&6
-if test "${ac_cv_type_char+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((char *) 0)
-  return 0;
-if (sizeof (char))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_char=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_char=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_char" >&5
-echo "${ECHO_T}$ac_cv_type_char" >&6
-
-echo "$as_me:$LINENO: checking size of char" >&5
-echo $ECHO_N "checking size of char... $ECHO_C" >&6
-if test "${ac_cv_sizeof_char+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_char" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (char))) >= 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (char))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr $ac_mid + 1`
-                    if test $ac_lo -le $ac_mid; then
-                      ac_lo= ac_hi=
-                      break
-                    fi
-                    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (char))) < 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (char))) >= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_hi=`expr '(' $ac_mid ')' - 1`
-                       if test $ac_mid -le $ac_hi; then
-                         ac_lo= ac_hi=
-                         break
-                       fi
-                       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo= ac_hi=
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (char))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_char=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (char), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (char), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-long longval () { return (long) (sizeof (char)); }
-unsigned long ulongval () { return (long) (sizeof (char)); }
-@%:@include <stdio.h>
-@%:@include <stdlib.h>
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (char))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (char))))
-        exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (char))))
-        exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_char=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (char), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (char), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_char=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_char" >&5
-echo "${ECHO_T}$ac_cv_sizeof_char" >&6
-cat >>confdefs.h <<_ACEOF
-@%:@define SIZEOF_CHAR $ac_cv_sizeof_char
-_ACEOF
-
-
-echo "$as_me:$LINENO: checking for short int" >&5
-echo $ECHO_N "checking for short int... $ECHO_C" >&6
-if test "${ac_cv_type_short_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((short int *) 0)
-  return 0;
-if (sizeof (short int))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_short_int=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_short_int=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_short_int" >&5
-echo "${ECHO_T}$ac_cv_type_short_int" >&6
-
-echo "$as_me:$LINENO: checking size of short int" >&5
-echo $ECHO_N "checking size of short int... $ECHO_C" >&6
-if test "${ac_cv_sizeof_short_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_short_int" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (short int))) >= 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (short int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr $ac_mid + 1`
-                    if test $ac_lo -le $ac_mid; then
-                      ac_lo= ac_hi=
-                      break
-                    fi
-                    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (short int))) < 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (short int))) >= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_hi=`expr '(' $ac_mid ')' - 1`
-                       if test $ac_mid -le $ac_hi; then
-                         ac_lo= ac_hi=
-                         break
-                       fi
-                       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo= ac_hi=
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (short int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_short_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (short int), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (short int), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-long longval () { return (long) (sizeof (short int)); }
-unsigned long ulongval () { return (long) (sizeof (short int)); }
-@%:@include <stdio.h>
-@%:@include <stdlib.h>
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (short int))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (short int))))
-        exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (short int))))
-        exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_short_int=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (short int), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (short int), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_short_int=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_short_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_short_int" >&6
-cat >>confdefs.h <<_ACEOF
-@%:@define SIZEOF_SHORT_INT $ac_cv_sizeof_short_int
-_ACEOF
-
-
-echo "$as_me:$LINENO: checking for int" >&5
-echo $ECHO_N "checking for int... $ECHO_C" >&6
-if test "${ac_cv_type_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((int *) 0)
-  return 0;
-if (sizeof (int))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_int=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_int=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5
-echo "${ECHO_T}$ac_cv_type_int" >&6
-
-echo "$as_me:$LINENO: checking size of int" >&5
-echo $ECHO_N "checking size of int... $ECHO_C" >&6
-if test "${ac_cv_sizeof_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_int" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (int))) >= 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr $ac_mid + 1`
-                    if test $ac_lo -le $ac_mid; then
-                      ac_lo= ac_hi=
-                      break
-                    fi
-                    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (int))) < 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (int))) >= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_hi=`expr '(' $ac_mid ')' - 1`
-                       if test $ac_mid -le $ac_hi; then
-                         ac_lo= ac_hi=
-                         break
-                       fi
-                       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo= ac_hi=
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (int), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-long longval () { return (long) (sizeof (int)); }
-unsigned long ulongval () { return (long) (sizeof (int)); }
-@%:@include <stdio.h>
-@%:@include <stdlib.h>
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (int))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (int))))
-        exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (int))))
-        exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_int=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (int), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_int=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_int" >&6
-cat >>confdefs.h <<_ACEOF
-@%:@define SIZEOF_INT $ac_cv_sizeof_int
-_ACEOF
-
-
-echo "$as_me:$LINENO: checking for long int" >&5
-echo $ECHO_N "checking for long int... $ECHO_C" >&6
-if test "${ac_cv_type_long_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((long int *) 0)
-  return 0;
-if (sizeof (long int))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_long_int=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_long_int=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_long_int" >&5
-echo "${ECHO_T}$ac_cv_type_long_int" >&6
-
-echo "$as_me:$LINENO: checking size of long int" >&5
-echo $ECHO_N "checking size of long int... $ECHO_C" >&6
-if test "${ac_cv_sizeof_long_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_long_int" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long int))) >= 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr $ac_mid + 1`
-                    if test $ac_lo -le $ac_mid; then
-                      ac_lo= ac_hi=
-                      break
-                    fi
-                    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long int))) < 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long int))) >= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_hi=`expr '(' $ac_mid ')' - 1`
-                       if test $ac_mid -le $ac_hi; then
-                         ac_lo= ac_hi=
-                         break
-                       fi
-                       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo= ac_hi=
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_long_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long int), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (long int), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-long longval () { return (long) (sizeof (long int)); }
-unsigned long ulongval () { return (long) (sizeof (long int)); }
-@%:@include <stdio.h>
-@%:@include <stdlib.h>
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (long int))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (long int))))
-        exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (long int))))
-        exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_long_int=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long int), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (long int), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_long_int=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_long_int" >&6
-cat >>confdefs.h <<_ACEOF
-@%:@define SIZEOF_LONG_INT $ac_cv_sizeof_long_int
-_ACEOF
-
-
-echo "$as_me:$LINENO: checking for long long int" >&5
-echo $ECHO_N "checking for long long int... $ECHO_C" >&6
-if test "${ac_cv_type_long_long_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((long long int *) 0)
-  return 0;
-if (sizeof (long long int))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_long_long_int=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_long_long_int=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_long_long_int" >&5
-echo "${ECHO_T}$ac_cv_type_long_long_int" >&6
-
-echo "$as_me:$LINENO: checking size of long long int" >&5
-echo $ECHO_N "checking size of long long int... $ECHO_C" >&6
-if test "${ac_cv_sizeof_long_long_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "$ac_cv_type_long_long_int" = yes; then
-  # The cast to unsigned long works around a bug in the HP C Compiler
-  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-  # This bug is HP SR number 8606223364.
-  if test "$cross_compiling" = yes; then
-  # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long long int))) >= 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=0 ac_mid=0
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long long int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr $ac_mid + 1`
-                    if test $ac_lo -le $ac_mid; then
-                      ac_lo= ac_hi=
-                      break
-                    fi
-                    ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long long int))) < 0)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=-1 ac_mid=-1
-  while :; do
-    cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long long int))) >= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_lo=$ac_mid; break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_hi=`expr '(' $ac_mid ')' - 1`
-                       if test $ac_mid -le $ac_hi; then
-                         ac_lo= ac_hi=
-                         break
-                       fi
-                       ac_mid=`expr 2 '*' $ac_mid`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-  done
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo= ac_hi=
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
-  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array @<:@1 - 2 * !(((long) (sizeof (long long int))) <= $ac_mid)@:>@;
-test_array @<:@0@:>@ = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_hi=$ac_mid
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_long_long_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long long int), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (long long int), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
-else
-  if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-long longval () { return (long) (sizeof (long long int)); }
-unsigned long ulongval () { return (long) (sizeof (long long int)); }
-@%:@include <stdio.h>
-@%:@include <stdlib.h>
-int
-main ()
-{
-
-  FILE *f = fopen ("conftest.val", "w");
-  if (! f)
-    exit (1);
-  if (((long) (sizeof (long long int))) < 0)
-    {
-      long i = longval ();
-      if (i != ((long) (sizeof (long long int))))
-        exit (1);
-      fprintf (f, "%ld\n", i);
-    }
-  else
-    {
-      unsigned long i = ulongval ();
-      if (i != ((long) (sizeof (long long int))))
-        exit (1);
-      fprintf (f, "%lu\n", i);
-    }
-  exit (ferror (f) || fclose (f) != 0);
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_sizeof_long_long_int=`cat conftest.val`
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long long int), 77
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (long long int), 77
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-rm -f conftest.val
-else
-  ac_cv_sizeof_long_long_int=0
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_long_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_long_long_int" >&6
-cat >>confdefs.h <<_ACEOF
-@%:@define SIZEOF_LONG_LONG_INT $ac_cv_sizeof_long_long_int
-_ACEOF
-
-
-
-# Sanity check long long for some platforms (AIX)
-if test "x$ac_cv_sizeof_long_long_int" = "x4" ; then
-        ac_cv_sizeof_long_long_int=0
-fi
-
-# More checks for data types
-echo "$as_me:$LINENO: checking for u_int type" >&5
-echo $ECHO_N "checking for u_int type... $ECHO_C" >&6
-if test "${ac_cv_have_u_int+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
- #include <sys/types.h> 
-int
-main ()
-{
- u_int a; a = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_u_int="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_u_int="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_u_int" >&5
-echo "${ECHO_T}$ac_cv_have_u_int" >&6
-if test "x$ac_cv_have_u_int" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_U_INT 1
-_ACEOF
-
-        have_u_int=1
-fi
-
-echo "$as_me:$LINENO: checking for intXX_t types" >&5
-echo $ECHO_N "checking for intXX_t types... $ECHO_C" >&6
-if test "${ac_cv_have_intxx_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
- #include <sys/types.h> 
-int
-main ()
-{
- int8_t a; int16_t b; int32_t c; a = b = c = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_intxx_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_intxx_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_intxx_t" >&5
-echo "${ECHO_T}$ac_cv_have_intxx_t" >&6
-if test "x$ac_cv_have_intxx_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_INTXX_T 1
-_ACEOF
-
-        have_intxx_t=1
-fi
-
-if (test -z "$have_intxx_t" && \
-           test "x$ac_cv_header_stdint_h" = "xyes")
-then
-    echo "$as_me:$LINENO: checking for intXX_t types in stdint.h" >&5
-echo $ECHO_N "checking for intXX_t types in stdint.h... $ECHO_C" >&6
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
- #include <stdint.h> 
-int
-main ()
-{
- int8_t a; int16_t b; int32_t c; a = b = c = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_INTXX_T 1
-_ACEOF
-
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-
-echo "$as_me:$LINENO: checking for int64_t type" >&5
-echo $ECHO_N "checking for int64_t type... $ECHO_C" >&6
-if test "${ac_cv_have_int64_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#ifdef HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#include <sys/socket.h>
-#ifdef HAVE_SYS_BITYPES_H
-# include <sys/bitypes.h>
-#endif
-                
-int
-main ()
-{
- int64_t a; a = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_int64_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_int64_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_int64_t" >&5
-echo "${ECHO_T}$ac_cv_have_int64_t" >&6
-if test "x$ac_cv_have_int64_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_INT64_T 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for u_intXX_t types" >&5
-echo $ECHO_N "checking for u_intXX_t types... $ECHO_C" >&6
-if test "${ac_cv_have_u_intxx_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
- #include <sys/types.h> 
-int
-main ()
-{
- u_int8_t a; u_int16_t b; u_int32_t c; a = b = c = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_u_intxx_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_u_intxx_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_u_intxx_t" >&5
-echo "${ECHO_T}$ac_cv_have_u_intxx_t" >&6
-if test "x$ac_cv_have_u_intxx_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_U_INTXX_T 1
-_ACEOF
-
-        have_u_intxx_t=1
-fi
-
-if test -z "$have_u_intxx_t" ; then
-    echo "$as_me:$LINENO: checking for u_intXX_t types in sys/socket.h" >&5
-echo $ECHO_N "checking for u_intXX_t types in sys/socket.h... $ECHO_C" >&6
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
- #include <sys/socket.h> 
-int
-main ()
-{
- u_int8_t a; u_int16_t b; u_int32_t c; a = b = c = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_U_INTXX_T 1
-_ACEOF
-
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-
-echo "$as_me:$LINENO: checking for u_int64_t types" >&5
-echo $ECHO_N "checking for u_int64_t types... $ECHO_C" >&6
-if test "${ac_cv_have_u_int64_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
- #include <sys/types.h> 
-int
-main ()
-{
- u_int64_t a; a = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_u_int64_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_u_int64_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_u_int64_t" >&5
-echo "${ECHO_T}$ac_cv_have_u_int64_t" >&6
-if test "x$ac_cv_have_u_int64_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_U_INT64_T 1
-_ACEOF
-
-        have_u_int64_t=1
-fi
-
-if test -z "$have_u_int64_t" ; then
-    echo "$as_me:$LINENO: checking for u_int64_t type in sys/bitypes.h" >&5
-echo $ECHO_N "checking for u_int64_t type in sys/bitypes.h... $ECHO_C" >&6
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
- #include <sys/bitypes.h> 
-int
-main ()
-{
- u_int64_t a; a = 1
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_U_INT64_T 1
-_ACEOF
-
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-
-if test -z "$have_u_intxx_t" ; then
-        echo "$as_me:$LINENO: checking for uintXX_t types" >&5
-echo $ECHO_N "checking for uintXX_t types... $ECHO_C" >&6
-if test "${ac_cv_have_uintxx_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-                        
-int
-main ()
-{
- uint8_t a; uint16_t b; uint32_t c; a = b = c = 1; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_uintxx_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_uintxx_t="no" 
-                
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-        
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_uintxx_t" >&5
-echo "${ECHO_T}$ac_cv_have_uintxx_t" >&6
-        if test "x$ac_cv_have_uintxx_t" = "xyes" ; then
-                cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_UINTXX_T 1
-_ACEOF
-
-        fi
-fi
-
-if test -z "$have_uintxx_t" ; then
-    echo "$as_me:$LINENO: checking for uintXX_t types in stdint.h" >&5
-echo $ECHO_N "checking for uintXX_t types in stdint.h... $ECHO_C" >&6
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
- #include <stdint.h> 
-int
-main ()
-{
- uint8_t a; uint16_t b; uint32_t c; a = b = c = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_UINTXX_T 1
-_ACEOF
-
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-
-if (test -z "$have_u_intxx_t" || test -z "$have_intxx_t" && \
-           test "x$ac_cv_header_sys_bitypes_h" = "xyes")
-then
-        echo "$as_me:$LINENO: checking for intXX_t and u_intXX_t types in sys/bitypes.h" >&5
-echo $ECHO_N "checking for intXX_t and u_intXX_t types in sys/bitypes.h... $ECHO_C" >&6
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/bitypes.h>
-                
-int
-main ()
-{
-
-                        int8_t a; int16_t b; int32_t c;
-                        u_int8_t e; u_int16_t f; u_int32_t g;
-                        a = b = c = e = f = g = 1;
-                
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_U_INTXX_T 1
-_ACEOF
-
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_INTXX_T 1
-_ACEOF
-
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext 
-fi
-
-
-echo "$as_me:$LINENO: checking for u_char" >&5
-echo $ECHO_N "checking for u_char... $ECHO_C" >&6
-if test "${ac_cv_have_u_char+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-                
-int
-main ()
-{
- u_char foo; foo = 125; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_u_char="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_u_char="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_u_char" >&5
-echo "${ECHO_T}$ac_cv_have_u_char" >&6
-if test "x$ac_cv_have_u_char" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_U_CHAR 1
-_ACEOF
-
-fi
-
-
-   echo "$as_me:$LINENO: checking for socklen_t" >&5
-echo $ECHO_N "checking for socklen_t... $ECHO_C" >&6
-if test "${ac_cv_type_socklen_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sys/types.h>
-#include <sys/socket.h>
-
-int
-main ()
-{
-if ((socklen_t *) 0)
-  return 0;
-if (sizeof (socklen_t))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_socklen_t=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_socklen_t=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_socklen_t" >&5
-echo "${ECHO_T}$ac_cv_type_socklen_t" >&6
-if test $ac_cv_type_socklen_t = yes; then
-  :
-else
-  
-      echo "$as_me:$LINENO: checking for socklen_t equivalent" >&5
-echo $ECHO_N "checking for socklen_t equivalent... $ECHO_C" >&6
-      if test "${curl_cv_socklen_t_equiv+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-         # Systems have either "struct sockaddr *" or
-         # "void *" as the second argument to getpeername
-         curl_cv_socklen_t_equiv=
-         for arg2 in "struct sockaddr" void; do
-            for t in int size_t unsigned long "unsigned long"; do
-               cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-                  #include <sys/types.h>
-                  #include <sys/socket.h>
-
-                  int getpeername (int, $arg2 *, $t *);
-               
-int
-main ()
-{
-
-                  $t len;
-                  getpeername(0,0,&len);
-               
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  
-                  curl_cv_socklen_t_equiv="$t"
-                  break
-               
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-            done
-         done
-
-         if test "x$curl_cv_socklen_t_equiv" = x; then
-            { { echo "$as_me:$LINENO: error: Cannot find a type to use in place of socklen_t" >&5
-echo "$as_me: error: Cannot find a type to use in place of socklen_t" >&2;}
-   { (exit 1); exit 1; }; }
-         fi
-      
-fi
-
-      echo "$as_me:$LINENO: result: $curl_cv_socklen_t_equiv" >&5
-echo "${ECHO_T}$curl_cv_socklen_t_equiv" >&6
-      
-cat >>confdefs.h <<_ACEOF
-@%:@define socklen_t $curl_cv_socklen_t_equiv
-_ACEOF
-
-fi
-
-
-
-echo "$as_me:$LINENO: checking for sig_atomic_t" >&5
-echo $ECHO_N "checking for sig_atomic_t... $ECHO_C" >&6
-if test "${ac_cv_type_sig_atomic_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <signal.h>
-
-int
-main ()
-{
-if ((sig_atomic_t *) 0)
-  return 0;
-if (sizeof (sig_atomic_t))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_sig_atomic_t=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_sig_atomic_t=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_sig_atomic_t" >&5
-echo "${ECHO_T}$ac_cv_type_sig_atomic_t" >&6
-if test $ac_cv_type_sig_atomic_t = yes; then
-  
-cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_SIG_ATOMIC_T 1
-_ACEOF
-
-
-fi
-
-
-echo "$as_me:$LINENO: checking for size_t" >&5
-echo $ECHO_N "checking for size_t... $ECHO_C" >&6
-if test "${ac_cv_have_size_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-                
-int
-main ()
-{
- size_t foo; foo = 1235; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_size_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_size_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_size_t" >&5
-echo "${ECHO_T}$ac_cv_have_size_t" >&6
-if test "x$ac_cv_have_size_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SIZE_T 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for ssize_t" >&5
-echo $ECHO_N "checking for ssize_t... $ECHO_C" >&6
-if test "${ac_cv_have_ssize_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-                
-int
-main ()
-{
- ssize_t foo; foo = 1235; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_ssize_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_ssize_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_ssize_t" >&5
-echo "${ECHO_T}$ac_cv_have_ssize_t" >&6
-if test "x$ac_cv_have_ssize_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SSIZE_T 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for clock_t" >&5
-echo $ECHO_N "checking for clock_t... $ECHO_C" >&6
-if test "${ac_cv_have_clock_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <time.h>
-                
-int
-main ()
-{
- clock_t foo; foo = 1235; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_clock_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_clock_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_clock_t" >&5
-echo "${ECHO_T}$ac_cv_have_clock_t" >&6
-if test "x$ac_cv_have_clock_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_CLOCK_T 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for sa_family_t" >&5
-echo $ECHO_N "checking for sa_family_t... $ECHO_C" >&6
-if test "${ac_cv_have_sa_family_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-                
-int
-main ()
-{
- sa_family_t foo; foo = 1235; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_sa_family_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-                
-int
-main ()
-{
- sa_family_t foo; foo = 1235; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_sa_family_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_sa_family_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_sa_family_t" >&5
-echo "${ECHO_T}$ac_cv_have_sa_family_t" >&6
-if test "x$ac_cv_have_sa_family_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SA_FAMILY_T 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for pid_t" >&5
-echo $ECHO_N "checking for pid_t... $ECHO_C" >&6
-if test "${ac_cv_have_pid_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-                
-int
-main ()
-{
- pid_t foo; foo = 1235; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_pid_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_pid_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_pid_t" >&5
-echo "${ECHO_T}$ac_cv_have_pid_t" >&6
-if test "x$ac_cv_have_pid_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_PID_T 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for mode_t" >&5
-echo $ECHO_N "checking for mode_t... $ECHO_C" >&6
-if test "${ac_cv_have_mode_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-                
-int
-main ()
-{
- mode_t foo; foo = 1235; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_mode_t="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_mode_t="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_mode_t" >&5
-echo "${ECHO_T}$ac_cv_have_mode_t" >&6
-if test "x$ac_cv_have_mode_t" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_MODE_T 1
-_ACEOF
-
-fi
-
-
-echo "$as_me:$LINENO: checking for struct sockaddr_storage" >&5
-echo $ECHO_N "checking for struct sockaddr_storage... $ECHO_C" >&6
-if test "${ac_cv_have_struct_sockaddr_storage+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-                
-int
-main ()
-{
- struct sockaddr_storage s; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_struct_sockaddr_storage="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_struct_sockaddr_storage="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_struct_sockaddr_storage" >&5
-echo "${ECHO_T}$ac_cv_have_struct_sockaddr_storage" >&6
-if test "x$ac_cv_have_struct_sockaddr_storage" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRUCT_SOCKADDR_STORAGE 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for struct sockaddr_in6" >&5
-echo $ECHO_N "checking for struct sockaddr_in6... $ECHO_C" >&6
-if test "${ac_cv_have_struct_sockaddr_in6+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <netinet/in.h>
-                
-int
-main ()
-{
- struct sockaddr_in6 s; s.sin6_family = 0; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_struct_sockaddr_in6="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_struct_sockaddr_in6="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_struct_sockaddr_in6" >&5
-echo "${ECHO_T}$ac_cv_have_struct_sockaddr_in6" >&6
-if test "x$ac_cv_have_struct_sockaddr_in6" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRUCT_SOCKADDR_IN6 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for struct in6_addr" >&5
-echo $ECHO_N "checking for struct in6_addr... $ECHO_C" >&6
-if test "${ac_cv_have_struct_in6_addr+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <netinet/in.h>
-                
-int
-main ()
-{
- struct in6_addr s; s.s6_addr[0] = 0; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_struct_in6_addr="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_struct_in6_addr="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_struct_in6_addr" >&5
-echo "${ECHO_T}$ac_cv_have_struct_in6_addr" >&6
-if test "x$ac_cv_have_struct_in6_addr" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRUCT_IN6_ADDR 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for struct addrinfo" >&5
-echo $ECHO_N "checking for struct addrinfo... $ECHO_C" >&6
-if test "${ac_cv_have_struct_addrinfo+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netdb.h>
-                
-int
-main ()
-{
- struct addrinfo s; s.ai_flags = AI_PASSIVE; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_struct_addrinfo="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_struct_addrinfo="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_struct_addrinfo" >&5
-echo "${ECHO_T}$ac_cv_have_struct_addrinfo" >&6
-if test "x$ac_cv_have_struct_addrinfo" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRUCT_ADDRINFO 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for struct timeval" >&5
-echo $ECHO_N "checking for struct timeval... $ECHO_C" >&6
-if test "${ac_cv_have_struct_timeval+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
- #include <sys/time.h> 
-int
-main ()
-{
- struct timeval tv; tv.tv_sec = 1;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_struct_timeval="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_struct_timeval="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_struct_timeval" >&5
-echo "${ECHO_T}$ac_cv_have_struct_timeval" >&6
-if test "x$ac_cv_have_struct_timeval" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_STRUCT_TIMEVAL 1
-_ACEOF
-
-        have_struct_timeval=1
-fi
-
-echo "$as_me:$LINENO: checking for struct timespec" >&5
-echo $ECHO_N "checking for struct timespec... $ECHO_C" >&6
-if test "${ac_cv_type_struct_timespec+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((struct timespec *) 0)
-  return 0;
-if (sizeof (struct timespec))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_struct_timespec=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_struct_timespec=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_struct_timespec" >&5
-echo "${ECHO_T}$ac_cv_type_struct_timespec" >&6
-if test $ac_cv_type_struct_timespec = yes; then
-  
-cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_STRUCT_TIMESPEC 1
-_ACEOF
-
-
-fi
-
-
-# We need int64_t or else certian parts of the compile will fail.
-if test "x$ac_cv_have_int64_t" = "xno" -a \
-        "x$ac_cv_sizeof_long_int" != "x8" -a \
-        "x$ac_cv_sizeof_long_long_int" = "x0" ; then
-        echo "OpenSSH requires int64_t support.  Contact your vendor or install"
-        echo "an alternative compiler (I.E., GCC) before continuing."
-        echo ""
-        exit 1;
-else
-        if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <stdio.h>
-#include <string.h>
-#ifdef HAVE_SNPRINTF
-main()
-{
-        char buf[50];
-        char expected_out[50];
-        int mazsize = 50 ;
-#if (SIZEOF_LONG_INT == 8)
-        long int num = 0x7fffffffffffffff;
-#else
-        long long num = 0x7fffffffffffffffll;
-#endif
-        strcpy(expected_out, "9223372036854775807");
-        snprintf(buf, mazsize, "%lld", num);
-        if(strcmp(buf, expected_out) != 0)
-                exit(1);
-        exit(0);
-}
-#else
-main() { exit(0); }
-#endif
-                
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   true 
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
- cat >>confdefs.h <<\_ACEOF
-@%:@define BROKEN_SNPRINTF 1
-_ACEOF
- 
-        
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-
-
-# look for field 'ut_host' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_host
-        echo "$as_me:$LINENO: checking for ut_host field in utmp.h" >&5
-echo $ECHO_N "checking for ut_host field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_host" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_HOST_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_host' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_host
-        echo "$as_me:$LINENO: checking for ut_host field in utmpx.h" >&5
-echo $ECHO_N "checking for ut_host field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_host" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_HOST_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'syslen' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"syslen
-        echo "$as_me:$LINENO: checking for syslen field in utmpx.h" >&5
-echo $ECHO_N "checking for syslen field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "syslen" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SYSLEN_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_pid' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_pid
-        echo "$as_me:$LINENO: checking for ut_pid field in utmp.h" >&5
-echo $ECHO_N "checking for ut_pid field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_pid" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_PID_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_type' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_type
-        echo "$as_me:$LINENO: checking for ut_type field in utmp.h" >&5
-echo $ECHO_N "checking for ut_type field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_type" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_TYPE_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_type' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_type
-        echo "$as_me:$LINENO: checking for ut_type field in utmpx.h" >&5
-echo $ECHO_N "checking for ut_type field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_type" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_TYPE_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_tv' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_tv
-        echo "$as_me:$LINENO: checking for ut_tv field in utmp.h" >&5
-echo $ECHO_N "checking for ut_tv field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_tv" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_TV_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_id' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_id
-        echo "$as_me:$LINENO: checking for ut_id field in utmp.h" >&5
-echo $ECHO_N "checking for ut_id field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_id" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_ID_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_id' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_id
-        echo "$as_me:$LINENO: checking for ut_id field in utmpx.h" >&5
-echo $ECHO_N "checking for ut_id field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_id" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_ID_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_addr' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_addr
-        echo "$as_me:$LINENO: checking for ut_addr field in utmp.h" >&5
-echo $ECHO_N "checking for ut_addr field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_addr" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_ADDR_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_addr' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_addr
-        echo "$as_me:$LINENO: checking for ut_addr field in utmpx.h" >&5
-echo $ECHO_N "checking for ut_addr field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_addr" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_ADDR_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_addr_v6' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_addr_v6
-        echo "$as_me:$LINENO: checking for ut_addr_v6 field in utmp.h" >&5
-echo $ECHO_N "checking for ut_addr_v6 field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_addr_v6" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_ADDR_V6_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_addr_v6' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_addr_v6
-        echo "$as_me:$LINENO: checking for ut_addr_v6 field in utmpx.h" >&5
-echo $ECHO_N "checking for ut_addr_v6 field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_addr_v6" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_ADDR_V6_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_exit' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_exit
-        echo "$as_me:$LINENO: checking for ut_exit field in utmp.h" >&5
-echo $ECHO_N "checking for ut_exit field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_exit" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_EXIT_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_time' in header 'utmp.h'
-                ossh_safe=`echo "utmp.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_time
-        echo "$as_me:$LINENO: checking for ut_time field in utmp.h" >&5
-echo $ECHO_N "checking for ut_time field in utmp.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmp.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_time" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_TIME_IN_UTMP 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_time' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_time
-        echo "$as_me:$LINENO: checking for ut_time field in utmpx.h" >&5
-echo $ECHO_N "checking for ut_time field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_time" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_TIME_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-# look for field 'ut_tv' in header 'utmpx.h'
-                ossh_safe=`echo "utmpx.h" | sed 'y%./+-%__p_%'`
-                ossh_varname="ossh_cv_$ossh_safe""_has_"ut_tv
-        echo "$as_me:$LINENO: checking for ut_tv field in utmpx.h" >&5
-echo $ECHO_N "checking for ut_tv field in utmpx.h... $ECHO_C" >&6
-        if eval "test \"\${$ossh_varname+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <utmpx.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "ut_tv" >/dev/null 2>&1; then
-                        eval "$ossh_varname=yes"                
-else
-                        eval "$ossh_varname=no"                 
-fi
-rm -f conftest*
-        
-fi
-
-        ossh_result=`eval 'echo $'"$ossh_varname"`
-        if test -n "`echo $ossh_varname`"; then
-                echo "$as_me:$LINENO: result: $ossh_result" >&5
-echo "${ECHO_T}$ossh_result" >&6
-                if test "x$ossh_result" = "xyes"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_TV_IN_UTMPX 1
-_ACEOF
-
-                fi
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-
-
-echo "$as_me:$LINENO: checking for struct stat.st_blksize" >&5
-echo $ECHO_N "checking for struct stat.st_blksize... $ECHO_C" >&6
-if test "${ac_cv_member_struct_stat_st_blksize+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (ac_aggr.st_blksize)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_stat_st_blksize=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (sizeof ac_aggr.st_blksize)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_stat_st_blksize=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_member_struct_stat_st_blksize=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_blksize" >&5
-echo "${ECHO_T}$ac_cv_member_struct_stat_st_blksize" >&6
-if test $ac_cv_member_struct_stat_st_blksize = yes; then
-  
-cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_STRUCT_STAT_ST_BLKSIZE 1
-_ACEOF
-
-
-fi
-
-
-echo "$as_me:$LINENO: checking for ss_family field in struct sockaddr_storage" >&5
-echo $ECHO_N "checking for ss_family field in struct sockaddr_storage... $ECHO_C" >&6
-if test "${ac_cv_have_ss_family_in_struct_ss+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-                
-int
-main ()
-{
- struct sockaddr_storage s; s.ss_family = 1; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_ss_family_in_struct_ss="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_ss_family_in_struct_ss="no" 
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_ss_family_in_struct_ss" >&5
-echo "${ECHO_T}$ac_cv_have_ss_family_in_struct_ss" >&6
-if test "x$ac_cv_have_ss_family_in_struct_ss" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SS_FAMILY_IN_SS 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for __ss_family field in struct sockaddr_storage" >&5
-echo $ECHO_N "checking for __ss_family field in struct sockaddr_storage... $ECHO_C" >&6
-if test "${ac_cv_have___ss_family_in_struct_ss+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-                
-int
-main ()
-{
- struct sockaddr_storage s; s.__ss_family = 1; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have___ss_family_in_struct_ss="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have___ss_family_in_struct_ss="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have___ss_family_in_struct_ss" >&5
-echo "${ECHO_T}$ac_cv_have___ss_family_in_struct_ss" >&6
-if test "x$ac_cv_have___ss_family_in_struct_ss" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE___SS_FAMILY_IN_SS 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for pw_class field in struct passwd" >&5
-echo $ECHO_N "checking for pw_class field in struct passwd... $ECHO_C" >&6
-if test "${ac_cv_have_pw_class_in_struct_passwd+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <pwd.h>
-                
-int
-main ()
-{
- struct passwd p; p.pw_class = 0; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_pw_class_in_struct_passwd="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_pw_class_in_struct_passwd="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_pw_class_in_struct_passwd" >&5
-echo "${ECHO_T}$ac_cv_have_pw_class_in_struct_passwd" >&6
-if test "x$ac_cv_have_pw_class_in_struct_passwd" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_PW_CLASS_IN_PASSWD 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for pw_expire field in struct passwd" >&5
-echo $ECHO_N "checking for pw_expire field in struct passwd... $ECHO_C" >&6
-if test "${ac_cv_have_pw_expire_in_struct_passwd+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <pwd.h>
-                
-int
-main ()
-{
- struct passwd p; p.pw_expire = 0; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_pw_expire_in_struct_passwd="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_pw_expire_in_struct_passwd="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_pw_expire_in_struct_passwd" >&5
-echo "${ECHO_T}$ac_cv_have_pw_expire_in_struct_passwd" >&6
-if test "x$ac_cv_have_pw_expire_in_struct_passwd" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_PW_EXPIRE_IN_PASSWD 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for pw_change field in struct passwd" >&5
-echo $ECHO_N "checking for pw_change field in struct passwd... $ECHO_C" >&6
-if test "${ac_cv_have_pw_change_in_struct_passwd+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <pwd.h>
-                
-int
-main ()
-{
- struct passwd p; p.pw_change = 0; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_pw_change_in_struct_passwd="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_pw_change_in_struct_passwd="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_pw_change_in_struct_passwd" >&5
-echo "${ECHO_T}$ac_cv_have_pw_change_in_struct_passwd" >&6
-if test "x$ac_cv_have_pw_change_in_struct_passwd" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_PW_CHANGE_IN_PASSWD 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for msg_accrights field in struct msghdr" >&5
-echo $ECHO_N "checking for msg_accrights field in struct msghdr... $ECHO_C" >&6
-if test "${ac_cv_have_accrights_in_msghdr+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/uio.h>
-int main() {
-#ifdef msg_accrights
-exit(1);
-#endif
-struct msghdr m;
-m.msg_accrights = 0;
-exit(0);
-}
-                
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_accrights_in_msghdr="yes" 
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
- ac_cv_have_accrights_in_msghdr="no" 
-        
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_accrights_in_msghdr" >&5
-echo "${ECHO_T}$ac_cv_have_accrights_in_msghdr" >&6
-if test "x$ac_cv_have_accrights_in_msghdr" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_ACCRIGHTS_IN_MSGHDR 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking for msg_control field in struct msghdr" >&5
-echo $ECHO_N "checking for msg_control field in struct msghdr... $ECHO_C" >&6
-if test "${ac_cv_have_control_in_msghdr+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/uio.h>
-int main() {
-#ifdef msg_control
-exit(1);
-#endif
-struct msghdr m;
-m.msg_control = 0;
-exit(0);
-}
-                
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_control_in_msghdr="yes" 
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
- ac_cv_have_control_in_msghdr="no" 
-        
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_control_in_msghdr" >&5
-echo "${ECHO_T}$ac_cv_have_control_in_msghdr" >&6
-if test "x$ac_cv_have_control_in_msghdr" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_CONTROL_IN_MSGHDR 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking if libc defines __progname" >&5
-echo $ECHO_N "checking if libc defines __progname... $ECHO_C" >&6
-if test "${ac_cv_libc_defines___progname+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- extern char *__progname; printf("%s", __progname); 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_libc_defines___progname="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_libc_defines___progname="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_libc_defines___progname" >&5
-echo "${ECHO_T}$ac_cv_libc_defines___progname" >&6
-if test "x$ac_cv_libc_defines___progname" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE___PROGNAME 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking whether $CC implements __FUNCTION__" >&5
-echo $ECHO_N "checking whether $CC implements __FUNCTION__... $ECHO_C" >&6
-if test "${ac_cv_cc_implements___FUNCTION__+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <stdio.h>
-
-int
-main ()
-{
- printf("%s", __FUNCTION__); 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_cc_implements___FUNCTION__="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_cc_implements___FUNCTION__="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_cc_implements___FUNCTION__" >&5
-echo "${ECHO_T}$ac_cv_cc_implements___FUNCTION__" >&6
-if test "x$ac_cv_cc_implements___FUNCTION__" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE___FUNCTION__ 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking whether $CC implements __func__" >&5
-echo $ECHO_N "checking whether $CC implements __func__... $ECHO_C" >&6
-if test "${ac_cv_cc_implements___func__+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <stdio.h>
-
-int
-main ()
-{
- printf("%s", __func__); 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_cc_implements___func__="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_cc_implements___func__="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_cc_implements___func__" >&5
-echo "${ECHO_T}$ac_cv_cc_implements___func__" >&6
-if test "x$ac_cv_cc_implements___func__" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE___func__ 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking whether getopt has optreset support" >&5
-echo $ECHO_N "checking whether getopt has optreset support... $ECHO_C" >&6
-if test "${ac_cv_have_getopt_optreset+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <getopt.h>
-                
-int
-main ()
-{
- extern int optreset; optreset = 0; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_have_getopt_optreset="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_have_getopt_optreset="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_have_getopt_optreset" >&5
-echo "${ECHO_T}$ac_cv_have_getopt_optreset" >&6
-if test "x$ac_cv_have_getopt_optreset" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_GETOPT_OPTRESET 1
-_ACEOF
-
-fi
-
-echo "$as_me:$LINENO: checking if libc defines sys_errlist" >&5
-echo $ECHO_N "checking if libc defines sys_errlist... $ECHO_C" >&6
-if test "${ac_cv_libc_defines_sys_errlist+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- extern const char *const sys_errlist[]; printf("%s", sys_errlist[0]);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_libc_defines_sys_errlist="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_libc_defines_sys_errlist="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_libc_defines_sys_errlist" >&5
-echo "${ECHO_T}$ac_cv_libc_defines_sys_errlist" >&6
-if test "x$ac_cv_libc_defines_sys_errlist" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SYS_ERRLIST 1
-_ACEOF
-
-fi
-
-
-echo "$as_me:$LINENO: checking if libc defines sys_nerr" >&5
-echo $ECHO_N "checking if libc defines sys_nerr... $ECHO_C" >&6
-if test "${ac_cv_libc_defines_sys_nerr+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
- extern int sys_nerr; printf("%i", sys_nerr);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   ac_cv_libc_defines_sys_nerr="yes" 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_libc_defines_sys_nerr="no" 
-        
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_libc_defines_sys_nerr" >&5
-echo "${ECHO_T}$ac_cv_libc_defines_sys_nerr" >&6
-if test "x$ac_cv_libc_defines_sys_nerr" = "xyes" ; then
-        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_SYS_NERR 1
-_ACEOF
-
-fi
-
-SCARD_MSG="no" 
-
-# Check whether user wants sectok support
-
-# Check whether --with-sectok or --without-sectok was given.
-if test "${with_sectok+set}" = set; then
-  withval="$with_sectok"
-  
-                if test "x$withval" != "xno" ; then
-                        if test "x$withval" != "xyes" ; then
-                                CPPFLAGS="$CPPFLAGS -I${withval}"
-                                LDFLAGS="$LDFLAGS -L${withval}"
-                                if test ! -z "$need_dash_r" ; then
-                                        LDFLAGS="$LDFLAGS -R${withval}"
-                                fi
-                                if test ! -z "$blibpath" ; then
-                                        blibpath="$blibpath:${withval}"
-                                fi
-                        fi
-                        
-for ac_header in sectok.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-@%:@include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-@%:@@%:@ ------------------------------------ @%:@@%:@
-@%:@@%:@ Report this to bug-autoconf@gnu.org. @%:@@%:@
-@%:@@%:@ ------------------------------------ @%:@@%:@
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-@%:@@%:@ ------------------------------------ @%:@@%:@
-@%:@@%:@ Report this to bug-autoconf@gnu.org. @%:@@%:@
-@%:@@%:@ ------------------------------------ @%:@@%:@
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-
-done
-
-                        if test "$ac_cv_header_sectok_h" != yes; then
-                                { { echo "$as_me:$LINENO: error: Can't find sectok.h" >&5
-echo "$as_me: error: Can't find sectok.h" >&2;}
-   { (exit 1); exit 1; }; }
-                        fi
-                        
-echo "$as_me:$LINENO: checking for sectok_open in -lsectok" >&5
-echo $ECHO_N "checking for sectok_open in -lsectok... $ECHO_C" >&6
-if test "${ac_cv_lib_sectok_sectok_open+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsectok  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char sectok_open ();
-int
-main ()
-{
-sectok_open ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_sectok_sectok_open=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_sectok_sectok_open=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_sectok_sectok_open" >&5
-echo "${ECHO_T}$ac_cv_lib_sectok_sectok_open" >&6
-if test $ac_cv_lib_sectok_sectok_open = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBSECTOK 1
-_ACEOF
-
-  LIBS="-lsectok $LIBS"
-
-fi
-
-                        if test "$ac_cv_lib_sectok_sectok_open" != yes; then
-                                { { echo "$as_me:$LINENO: error: Can't find libsectok" >&5
-echo "$as_me: error: Can't find libsectok" >&2;}
-   { (exit 1); exit 1; }; }
-                        fi
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define SMARTCARD 1
-_ACEOF
-
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define USE_SECTOK 1
-_ACEOF
-
-                        SCARD_MSG="yes, using sectok" 
-                fi
-        
-
-fi; 
-
-# Check whether user wants OpenSC support
-
-# Check whether --with-opensc or --without-opensc was given.
-if test "${with_opensc+set}" = set; then
-  withval="$with_opensc"
-  opensc_config_prefix="$withval"
-else
-  opensc_config_prefix=""
-fi; 
-if test x$opensc_config_prefix != x ; then
-  OPENSC_CONFIG=$opensc_config_prefix/bin/opensc-config
-  # Extract the first word of "opensc-config", so it can be a program name with args.
-set dummy opensc-config; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_OPENSC_CONFIG+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $OPENSC_CONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_OPENSC_CONFIG="$OPENSC_CONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_OPENSC_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_path_OPENSC_CONFIG" && ac_cv_path_OPENSC_CONFIG="no"
-  ;;
-esac
-fi
-OPENSC_CONFIG=$ac_cv_path_OPENSC_CONFIG
-
-if test -n "$OPENSC_CONFIG"; then
-  echo "$as_me:$LINENO: result: $OPENSC_CONFIG" >&5
-echo "${ECHO_T}$OPENSC_CONFIG" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  if test "$OPENSC_CONFIG" != "no"; then
-    LIBOPENSC_CFLAGS=`$OPENSC_CONFIG --cflags`
-    LIBOPENSC_LIBS=`$OPENSC_CONFIG --libs`
-    CPPFLAGS="$CPPFLAGS $LIBOPENSC_CFLAGS"
-    LDFLAGS="$LDFLAGS $LIBOPENSC_LIBS"
-    cat >>confdefs.h <<\_ACEOF
-@%:@define SMARTCARD 1
-_ACEOF
-
-    cat >>confdefs.h <<\_ACEOF
-@%:@define USE_OPENSC 1
-_ACEOF
-
-    SCARD_MSG="yes, using OpenSC" 
-  fi
-fi
-
-# Check whether user wants Kerberos 5 support
-KRB5_MSG="no" 
-
-# Check whether --with-kerberos5 or --without-kerberos5 was given.
-if test "${with_kerberos5+set}" = set; then
-  withval="$with_kerberos5"
-  
-                if test "x$withval" != "xno" ; then
-                        if test "x$withval" = "xyes" ; then
-                                KRB5ROOT="/usr/local"
-                        else
-                                KRB5ROOT=${withval}
-                        fi
-                        CPPFLAGS="$CPPFLAGS -I${KRB5ROOT}/include"
-                        LDFLAGS="$LDFLAGS -L${KRB5ROOT}/lib"
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define KRB5 1
-_ACEOF
-
-                        KRB5_MSG="yes"
-                        echo "$as_me:$LINENO: checking whether we are using Heimdal" >&5
-echo $ECHO_N "checking whether we are using Heimdal... $ECHO_C" >&6
-                        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
- #include <krb5.h> 
-int
-main ()
-{
- char *tmp = heimdal_version; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                                         cat >>confdefs.h <<\_ACEOF
-@%:@define HEIMDAL 1
-_ACEOF
-
-                                         K5LIBS="-lkrb5 -ldes -lcom_err -lasn1 -lroken"
-                                       
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                                         K5LIBS="-lkrb5 -lk5crypto -lcom_err"
-                                       
-                        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-                        if test ! -z "$need_dash_r" ; then
-                                LDFLAGS="$LDFLAGS -R${KRB5ROOT}/lib"
-                        fi
-                        if test ! -z "$blibpath" ; then
-                                blibpath="$blibpath:${KRB5ROOT}/lib"
-                        fi
-                        
-echo "$as_me:$LINENO: checking for dn_expand in -lresolv" >&5
-echo $ECHO_N "checking for dn_expand in -lresolv... $ECHO_C" >&6
-if test "${ac_cv_lib_resolv_dn_expand+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lresolv  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dn_expand ();
-int
-main ()
-{
-dn_expand ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_resolv_dn_expand=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_resolv_dn_expand=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_dn_expand" >&5
-echo "${ECHO_T}$ac_cv_lib_resolv_dn_expand" >&6
-if test $ac_cv_lib_resolv_dn_expand = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBRESOLV 1
-_ACEOF
-
-  LIBS="-lresolv $LIBS"
-
-fi
-
-
-                        KRB5=yes
-                fi
-        
-
-fi; 
-# Check whether user wants Kerberos 4 support
-KRB4_MSG="no" 
-
-# Check whether --with-kerberos4 or --without-kerberos4 was given.
-if test "${with_kerberos4+set}" = set; then
-  withval="$with_kerberos4"
-  
-                if test "x$withval" != "xno" ; then
-                        if test "x$withval" != "xyes" ; then
-                                CPPFLAGS="$CPPFLAGS -I${withval}/include"
-                                LDFLAGS="$LDFLAGS -L${withval}/lib"
-                                if test ! -z "$need_dash_r" ; then
-                                        LDFLAGS="$LDFLAGS -R${withval}/lib"
-                                fi
-                                if test ! -z "$blibpath" ; then
-                                        blibpath="$blibpath:${withval}/lib"
-                                fi
-                        else
-                                if test -d /usr/include/kerberosIV ; then
-                                        CPPFLAGS="$CPPFLAGS -I/usr/include/kerberosIV"
-                                fi
-                        fi
-
-                        
-for ac_header in krb.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-@%:@include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-@%:@include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc in
-  yes:no )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-@%:@@%:@ ------------------------------------ @%:@@%:@
-@%:@@%:@ Report this to bug-autoconf@gnu.org. @%:@@%:@
-@%:@@%:@ ------------------------------------ @%:@@%:@
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-  no:yes )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    (
-      cat <<\_ASBOX
-@%:@@%:@ ------------------------------------ @%:@@%:@
-@%:@@%:@ Report this to bug-autoconf@gnu.org. @%:@@%:@
-@%:@@%:@ ------------------------------------ @%:@@%:@
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
- 
-fi
-
-done
-
-                        if test "$ac_cv_header_krb_h" != yes; then
-                                { echo "$as_me:$LINENO: WARNING: Cannot find krb.h, build may fail" >&5
-echo "$as_me: WARNING: Cannot find krb.h, build may fail" >&2;}
-                        fi
-                        
-echo "$as_me:$LINENO: checking for main in -lkrb" >&5
-echo $ECHO_N "checking for main in -lkrb... $ECHO_C" >&6
-if test "${ac_cv_lib_krb_main+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lkrb  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-
-int
-main ()
-{
-main ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_krb_main=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_krb_main=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_krb_main" >&5
-echo "${ECHO_T}$ac_cv_lib_krb_main" >&6
-if test $ac_cv_lib_krb_main = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBKRB 1
-_ACEOF
-
-  LIBS="-lkrb $LIBS"
-
-fi
-
-                        if test "$ac_cv_lib_krb_main" != yes; then
-                                
-echo "$as_me:$LINENO: checking for main in -lkrb4" >&5
-echo $ECHO_N "checking for main in -lkrb4... $ECHO_C" >&6
-if test "${ac_cv_lib_krb4_main+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lkrb4  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-
-int
-main ()
-{
-main ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_krb4_main=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_krb4_main=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_krb4_main" >&5
-echo "${ECHO_T}$ac_cv_lib_krb4_main" >&6
-if test $ac_cv_lib_krb4_main = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBKRB4 1
-_ACEOF
-
-  LIBS="-lkrb4 $LIBS"
-
-fi
-
-                                if test "$ac_cv_lib_krb4_main" != yes; then
-                                        { echo "$as_me:$LINENO: WARNING: Cannot find libkrb nor libkrb4, build may fail" >&5
-echo "$as_me: WARNING: Cannot find libkrb nor libkrb4, build may fail" >&2;}
-                                else
-                                        KLIBS="-lkrb4"
-                                fi
-                        else
-                                KLIBS="-lkrb"
-                        fi
-                        
-echo "$as_me:$LINENO: checking for des_cbc_encrypt in -ldes" >&5
-echo $ECHO_N "checking for des_cbc_encrypt in -ldes... $ECHO_C" >&6
-if test "${ac_cv_lib_des_des_cbc_encrypt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldes  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char des_cbc_encrypt ();
-int
-main ()
-{
-des_cbc_encrypt ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_des_des_cbc_encrypt=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_des_des_cbc_encrypt=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_des_des_cbc_encrypt" >&5
-echo "${ECHO_T}$ac_cv_lib_des_des_cbc_encrypt" >&6
-if test $ac_cv_lib_des_des_cbc_encrypt = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBDES 1
-_ACEOF
-
-  LIBS="-ldes $LIBS"
-
-fi
-
-                        if test "$ac_cv_lib_des_des_cbc_encrypt" != yes; then
-                                
-echo "$as_me:$LINENO: checking for des_cbc_encrypt in -ldes425" >&5
-echo $ECHO_N "checking for des_cbc_encrypt in -ldes425... $ECHO_C" >&6
-if test "${ac_cv_lib_des425_des_cbc_encrypt+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldes425  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char des_cbc_encrypt ();
-int
-main ()
-{
-des_cbc_encrypt ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_des425_des_cbc_encrypt=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_des425_des_cbc_encrypt=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_des425_des_cbc_encrypt" >&5
-echo "${ECHO_T}$ac_cv_lib_des425_des_cbc_encrypt" >&6
-if test $ac_cv_lib_des425_des_cbc_encrypt = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBDES425 1
-_ACEOF
-
-  LIBS="-ldes425 $LIBS"
-
-fi
-
-                                if test "$ac_cv_lib_des425_des_cbc_encrypt" != yes; then
-                                        { echo "$as_me:$LINENO: WARNING: Cannot find libdes nor libdes425, build may fail" >&5
-echo "$as_me: WARNING: Cannot find libdes nor libdes425, build may fail" >&2;}
-                                else
-                                        KLIBS="-ldes425"
-                                fi
-                        else
-                                KLIBS="-ldes"
-                        fi
-                        
-echo "$as_me:$LINENO: checking for dn_expand in -lresolv" >&5
-echo $ECHO_N "checking for dn_expand in -lresolv... $ECHO_C" >&6
-if test "${ac_cv_lib_resolv_dn_expand+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lresolv  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char dn_expand ();
-int
-main ()
-{
-dn_expand ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_lib_resolv_dn_expand=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_resolv_dn_expand=no
-fi
-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_dn_expand" >&5
-echo "${ECHO_T}$ac_cv_lib_resolv_dn_expand" >&6
-if test $ac_cv_lib_resolv_dn_expand = yes; then
-  cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_LIBRESOLV 1
-_ACEOF
-
-  LIBS="-lresolv $LIBS"
-
-fi
-
-                        KRB4=yes
-                        KRB4_MSG="yes" 
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define KRB4 1
-_ACEOF
-
-                fi
-        
-
-fi; 
-
-# Check whether user wants AFS support
-AFS_MSG="no" 
-
-# Check whether --with-afs or --without-afs was given.
-if test "${with_afs+set}" = set; then
-  withval="$with_afs"
-  
-                if test "x$withval" != "xno" ; then
-
-                        if test "x$withval" != "xyes" ; then
-                                CPPFLAGS="$CPPFLAGS -I${withval}/include"
-                                LDFLAGS="$LDFLAGS -L${withval}/lib"
-                        fi
-
-                        if test -z "$KRB4" ; then
-                                { echo "$as_me:$LINENO: WARNING: AFS requires Kerberos IV support, build may fail" >&5
-echo "$as_me: WARNING: AFS requires Kerberos IV support, build may fail" >&2;}
-                        fi
-
-                        LIBS="-lkafs $LIBS"
-                        if test ! -z "$AFS_LIBS" ; then
-                                LIBS="$LIBS $AFS_LIBS"
-                        fi
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define AFS 1
-_ACEOF
-
-                        AFS_MSG="yes" 
-                fi
-        
-
-fi; 
-LIBS="$LIBS $KLIBS $K5LIBS"
-
-# Looking for programs, paths and files
-
-PRIVSEP_PATH=/var/empty
-
-# Check whether --with-privsep-path or --without-privsep-path was given.
-if test "${with_privsep_path+set}" = set; then
-  withval="$with_privsep_path"
-  
-                if test "x$withval" != "$no" ; then
-                        PRIVSEP_PATH=$withval
-                fi
-        
-
-fi; 
-
-
-
-# Check whether --with-xauth or --without-xauth was given.
-if test "${with_xauth+set}" = set; then
-  withval="$with_xauth"
-  
-                if test "x$withval" != "xno" ; then
-                        xauth_path=$withval
-                fi
-        
-else
-  
-                TestPath="$PATH"
-                TestPath="${TestPath}${PATH_SEPARATOR}/usr/X/bin"
-                TestPath="${TestPath}${PATH_SEPARATOR}/usr/bin/X11"
-                TestPath="${TestPath}${PATH_SEPARATOR}/usr/X11R6/bin"
-                TestPath="${TestPath}${PATH_SEPARATOR}/usr/openwin/bin"
-                # Extract the first word of "xauth", so it can be a program name with args.
-set dummy xauth; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_xauth_path+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $xauth_path in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_xauth_path="$xauth_path" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $TestPath
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_xauth_path="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-xauth_path=$ac_cv_path_xauth_path
-
-if test -n "$xauth_path"; then
-  echo "$as_me:$LINENO: result: $xauth_path" >&5
-echo "${ECHO_T}$xauth_path" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-                if (test ! -z "$xauth_path" && test -x "/usr/openwin/bin/xauth") ; then
-                        xauth_path="/usr/openwin/bin/xauth"
-                fi
-        
-
-fi; 
-
-STRIP_OPT=-s
-# Check whether --enable-strip or --disable-strip was given.
-if test "${enable_strip+set}" = set; then
-  enableval="$enable_strip"
-  
-                if test "x$enableval" = "xno" ; then
-                        STRIP_OPT=
-                fi
-        
-
-fi; 
-
-
-if test -z "$xauth_path" ; then
-        XAUTH_PATH="undefined"
-        
-else
-        cat >>confdefs.h <<_ACEOF
-@%:@define XAUTH_PATH "$xauth_path"
-_ACEOF
-
-        XAUTH_PATH=$xauth_path
-        
-fi
-
-# Check for mail directory (last resort if we cannot get it from headers)
-if test ! -z "$MAIL" ; then
-        maildir=`dirname $MAIL`
-        cat >>confdefs.h <<_ACEOF
-@%:@define MAIL_DIRECTORY "$maildir"
-_ACEOF
-
-fi
-
-if test -z "$no_dev_ptmx" ; then
-        if test "x$disable_ptmx_check" != "xyes" ; then
-                echo "$as_me:$LINENO: checking for \"/dev/ptmx\"" >&5
-echo $ECHO_N "checking for \"/dev/ptmx\"... $ECHO_C" >&6
-if test "${ac_cv_file___dev_ptmx_+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  test "$cross_compiling" = yes &&
-  { { echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5
-echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-if test -r ""/dev/ptmx""; then
-  ac_cv_file___dev_ptmx_=yes
-else
-  ac_cv_file___dev_ptmx_=no
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_file___dev_ptmx_" >&5
-echo "${ECHO_T}$ac_cv_file___dev_ptmx_" >&6
-if test $ac_cv_file___dev_ptmx_ = yes; then
-  
-                                cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_DEV_PTMX 1
-_ACEOF
-
-                                have_dev_ptmx=1
-                        
-                
-fi
-
-        fi
-fi
-echo "$as_me:$LINENO: checking for \"/dev/ptc\"" >&5
-echo $ECHO_N "checking for \"/dev/ptc\"... $ECHO_C" >&6
-if test "${ac_cv_file___dev_ptc_+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  test "$cross_compiling" = yes &&
-  { { echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5
-echo "$as_me: error: cannot check for file existence when cross compiling" >&2;}
-   { (exit 1); exit 1; }; }
-if test -r ""/dev/ptc""; then
-  ac_cv_file___dev_ptc_=yes
-else
-  ac_cv_file___dev_ptc_=no
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_file___dev_ptc_" >&5
-echo "${ECHO_T}$ac_cv_file___dev_ptc_" >&6
-if test $ac_cv_file___dev_ptc_ = yes; then
-  
-                cat >>confdefs.h <<_ACEOF
-@%:@define HAVE_DEV_PTS_AND_PTC 1
-_ACEOF
-
-                have_dev_ptc=1
-        
-
-fi
-
-
-# Options from here on. Some of these are preset by platform above
-
-# Check whether --with-mantype or --without-mantype was given.
-if test "${with_mantype+set}" = set; then
-  withval="$with_mantype"
-  
-                case "$withval" in
-                man|cat|doc)
-                        MANTYPE=$withval
-                        ;;
-                *)
-                        { { echo "$as_me:$LINENO: error: invalid man type: $withval" >&5
-echo "$as_me: error: invalid man type: $withval" >&2;}
-   { (exit 1); exit 1; }; }
-                        ;;
-                esac
-        
-
-fi; 
-if test -z "$MANTYPE"; then
-        TestPath="/usr/bin${PATH_SEPARATOR}/usr/ucb"
-        for ac_prog in nroff awf
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_NROFF+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $NROFF in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_NROFF="$NROFF" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $TestPath
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_NROFF="$as_dir/$ac_word$ac_exec_ext"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  ;;
-esac
-fi
-NROFF=$ac_cv_path_NROFF
-
-if test -n "$NROFF"; then
-  echo "$as_me:$LINENO: result: $NROFF" >&5
-echo "${ECHO_T}$NROFF" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  test -n "$NROFF" && break
-done
-test -n "$NROFF" || NROFF="/bin/false"
-
-        if ${NROFF} -mdoc ${srcdir}/ssh.1 >/dev/null 2>&1; then
-                MANTYPE=doc
-        elif ${NROFF} -man ${srcdir}/ssh.1 >/dev/null 2>&1; then
-                MANTYPE=man
-        else
-                MANTYPE=cat
-        fi
-fi
-
-if test "$MANTYPE" = "doc"; then
-        mansubdir=man;
-else
-        mansubdir=$MANTYPE;
-fi
-
-
-# Check whether to enable MD5 passwords
-MD5_MSG="no" 
-
-# Check whether --with-md5-passwords or --without-md5-passwords was given.
-if test "${with_md5_passwords+set}" = set; then
-  withval="$with_md5_passwords"
-  
-                if test "x$withval" != "xno" ; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define HAVE_MD5_PASSWORDS 1
-_ACEOF
-
-                        MD5_MSG="yes" 
-                fi
-        
-
-fi; 
-
-# Whether to disable shadow password support
-
-# Check whether --with-shadow or --without-shadow was given.
-if test "${with_shadow+set}" = set; then
-  withval="$with_shadow"
-  
-                if test "x$withval" = "xno" ; then      
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_SHADOW 1
-_ACEOF
-
-                        disable_shadow=yes
-                fi
-        
-
-fi; 
-
-if test -z "$disable_shadow" ; then
-        echo "$as_me:$LINENO: checking if the systems has expire shadow information" >&5
-echo $ECHO_N "checking if the systems has expire shadow information... $ECHO_C" >&6
-        cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <shadow.h>
-        struct spwd sp;
-        
-int
-main ()
-{
- sp.sp_expire = sp.sp_lstchg = sp.sp_inact = 0; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   sp_expire_available=yes 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-        
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-        if test "x$sp_expire_available" = "xyes" ; then
-                echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                cat >>confdefs.h <<\_ACEOF
-@%:@define HAS_SHADOW_EXPIRE 1
-_ACEOF
-
-        else
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-        fi
-fi
-
-# Use ip address instead of hostname in $DISPLAY
-if test ! -z "$IPADDR_IN_DISPLAY" ; then
-        DISPLAY_HACK_MSG="yes"
-        cat >>confdefs.h <<\_ACEOF
-@%:@define IPADDR_IN_DISPLAY 1
-_ACEOF
-
-else
-        DISPLAY_HACK_MSG="no" 
-        
-# Check whether --with-ipaddr-display or --without-ipaddr-display was given.
-if test "${with_ipaddr_display+set}" = set; then
-  withval="$with_ipaddr_display"
-  
-                        if test "x$withval" != "xno" ; then     
-                                cat >>confdefs.h <<\_ACEOF
-@%:@define IPADDR_IN_DISPLAY 1
-_ACEOF
-
-                                DISPLAY_HACK_MSG="yes" 
-                        fi
-                
-        
-fi; 
-fi
-
-if test $ac_cv_func_login_getcapbool = "yes" -a \
-        $ac_cv_header_login_cap_h = "yes" ; then
-        USES_LOGIN_CONF=yes
-fi
-# Whether to mess with the default path
-SERVER_PATH_MSG="(default)" 
-
-# Check whether --with-default-path or --without-default-path was given.
-if test "${with_default_path+set}" = set; then
-  withval="$with_default_path"
-  
-                if test "$USES_LOGIN_CONF" = "yes" ; then
-                        { echo "$as_me:$LINENO: WARNING: 
---with-default-path=PATH has no effect on this system.
-Edit /etc/login.conf instead." >&5
-echo "$as_me: WARNING: 
---with-default-path=PATH has no effect on this system.
-Edit /etc/login.conf instead." >&2;}
-                elif test "x$withval" != "xno" ; then   
-                        user_path="$withval"
-                        SERVER_PATH_MSG="$withval" 
-                fi
-        
-else
-   if test "$USES_LOGIN_CONF" = "yes" ; then
-        { echo "$as_me:$LINENO: WARNING: Make sure the path to scp is in /etc/login.conf" >&5
-echo "$as_me: WARNING: Make sure the path to scp is in /etc/login.conf" >&2;}
-        else
-        if test "$cross_compiling" = yes; then
-   user_path="/usr/bin:/bin:/usr/sbin:/sbin" 
-        
-else
-  cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* find out what STDPATH is */
-#include <stdio.h>
-#ifdef HAVE_PATHS_H
-# include <paths.h>
-#endif
-#ifndef _PATH_STDPATH
-# ifdef _PATH_USERPATH  /* Irix */
-#  define _PATH_STDPATH _PATH_USERPATH
-# else
-#  define _PATH_STDPATH "/usr/bin:/bin:/usr/sbin:/sbin"
-# endif
-#endif
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#define DATA "conftest.stdpath"
-
-main()
-{
-        FILE *fd;
-        int rc;
-        
-        fd = fopen(DATA,"w");
-        if(fd == NULL)
-                exit(1);
-        
-        if ((rc = fprintf(fd,"%s", _PATH_STDPATH)) < 0)
-                exit(1);
-
-        exit(0);
-}
-                
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   user_path=`cat conftest.stdpath` 
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
- user_path="/usr/bin:/bin:/usr/sbin:/sbin" 
-fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-# make sure $bindir is in USER_PATH so scp will work
-                t_bindir=`eval echo ${bindir}`
-                case $t_bindir in
-                        NONE/*) t_bindir=`echo $t_bindir | sed "s~NONE~$prefix~"` ;;
-                esac
-                case $t_bindir in
-                        NONE/*) t_bindir=`echo $t_bindir | sed "s~NONE~$ac_default_prefix~"` ;;
-                esac
-                echo $user_path | grep ":$t_bindir"  > /dev/null 2>&1
-                if test $? -ne 0  ; then
-                        echo $user_path | grep "^$t_bindir"  > /dev/null 2>&1
-                        if test $? -ne 0  ; then
-                                user_path=$user_path:$t_bindir
-                                echo "$as_me:$LINENO: result: Adding $t_bindir to USER_PATH so scp will work" >&5
-echo "${ECHO_T}Adding $t_bindir to USER_PATH so scp will work" >&6
-                        fi
-                fi
-        fi 
-
-fi; 
-if test "$USES_LOGIN_CONF" != "yes" ; then
-        cat >>confdefs.h <<_ACEOF
-@%:@define USER_PATH "$user_path"
-_ACEOF
-
-        
-fi
-
-# Set superuser path separately to user path
-
-# Check whether --with-superuser-path or --without-superuser-path was given.
-if test "${with_superuser_path+set}" = set; then
-  withval="$with_superuser_path"
-  
-                if test "x$withval" != "xno" ; then
-                        cat >>confdefs.h <<_ACEOF
-@%:@define SUPERUSER_PATH "$withval"
-_ACEOF
-
-                        superuser_path=$withval
-                fi
-        
-
-fi; 
-
-
-# Whether to force IPv4 by default (needed on broken glibc Linux)
-IPV4_HACK_MSG="no" 
-
-# Check whether --with-ipv4-default or --without-ipv4-default was given.
-if test "${with_ipv4_default+set}" = set; then
-  withval="$with_ipv4_default"
-  
-                if test "x$withval" != "xno" ; then     
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define IPV4_DEFAULT 1
-_ACEOF
-
-                        IPV4_HACK_MSG="yes" 
-                fi
-        
-
-fi; 
-
-echo "$as_me:$LINENO: checking if we need to convert IPv4 in IPv6-mapped addresses" >&5
-echo $ECHO_N "checking if we need to convert IPv4 in IPv6-mapped addresses... $ECHO_C" >&6
-IPV4_IN6_HACK_MSG="no" 
-
-# Check whether --with-4in6 or --without-4in6 was given.
-if test "${with_4in6+set}" = set; then
-  withval="$with_4in6"
-  
-                if test "x$withval" != "xno" ; then
-                        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define IPV4_IN_IPV6 1
-_ACEOF
-
-                        IPV4_IN6_HACK_MSG="yes" 
-                else
-                        echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                fi
-        
-else
-  
-                if test "x$inet6_default_4in6" = "xyes"; then
-                        echo "$as_me:$LINENO: result: yes (default)" >&5
-echo "${ECHO_T}yes (default)" >&6
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define IPV4_IN_IPV6 1
-_ACEOF
-
-                        IPV4_IN6_HACK_MSG="yes" 
-                else
-                        echo "$as_me:$LINENO: result: no (default)" >&5
-echo "${ECHO_T}no (default)" >&6
-                fi
-        
-
-fi; 
-
-# Whether to enable BSD auth support
-BSD_AUTH_MSG=no
-
-# Check whether --with-bsd-auth or --without-bsd-auth was given.
-if test "${with_bsd_auth+set}" = set; then
-  withval="$with_bsd_auth"
-  
-                if test "x$withval" != "xno" ; then     
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define BSD_AUTH 1
-_ACEOF
-
-                        BSD_AUTH_MSG=yes
-                fi
-        
-
-fi; 
-
-# Where to place sshd.pid
-piddir=/var/run
-# make sure the directory exists
-if test ! -d $piddir ; then     
-        piddir=`eval echo ${sysconfdir}`
-        case $piddir in
-                NONE/*) piddir=`echo $piddir | sed "s~NONE~$ac_default_prefix~"` ;;
-        esac
-fi
-
-
-# Check whether --with-pid-dir or --without-pid-dir was given.
-if test "${with_pid_dir+set}" = set; then
-  withval="$with_pid_dir"
-  
-                if test "x$withval" != "xno" ; then     
-                        piddir=$withval
-                        if test ! -d $piddir ; then     
-                        { echo "$as_me:$LINENO: WARNING: ** no $piddir directory on this system **" >&5
-echo "$as_me: WARNING: ** no $piddir directory on this system **" >&2;}
-                        fi
-                fi
-        
-
-fi; 
-
-cat >>confdefs.h <<_ACEOF
-@%:@define _PATH_SSH_PIDDIR "$piddir"
-_ACEOF
-
-
-
-# Check whether --enable-lastlog or --disable-lastlog was given.
-if test "${enable_lastlog+set}" = set; then
-  enableval="$enable_lastlog"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_LASTLOG 1
-_ACEOF
- 
-
-fi; 
-# Check whether --enable-utmp or --disable-utmp was given.
-if test "${enable_utmp+set}" = set; then
-  enableval="$enable_utmp"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMP 1
-_ACEOF
- 
-
-fi; 
-# Check whether --enable-utmpx or --disable-utmpx was given.
-if test "${enable_utmpx+set}" = set; then
-  enableval="$enable_utmpx"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMPX 1
-_ACEOF
- 
-
-fi; 
-# Check whether --enable-wtmp or --disable-wtmp was given.
-if test "${enable_wtmp+set}" = set; then
-  enableval="$enable_wtmp"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_WTMP 1
-_ACEOF
- 
-
-fi; 
-# Check whether --enable-wtmpx or --disable-wtmpx was given.
-if test "${enable_wtmpx+set}" = set; then
-  enableval="$enable_wtmpx"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_WTMPX 1
-_ACEOF
- 
-
-fi; 
-# Check whether --enable-libutil or --disable-libutil was given.
-if test "${enable_libutil+set}" = set; then
-  enableval="$enable_libutil"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_LOGIN 1
-_ACEOF
- 
-
-fi; 
-# Check whether --enable-pututline or --disable-pututline was given.
-if test "${enable_pututline+set}" = set; then
-  enableval="$enable_pututline"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_PUTUTLINE 1
-_ACEOF
- 
-
-fi; 
-# Check whether --enable-pututxline or --disable-pututxline was given.
-if test "${enable_pututxline+set}" = set; then
-  enableval="$enable_pututxline"
-   cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_PUTUTXLINE 1
-_ACEOF
- 
-
-fi; 
-
-# Check whether --with-lastlog or --without-lastlog was given.
-if test "${with_lastlog+set}" = set; then
-  withval="$with_lastlog"
-  
-                if test "x$withval" = "xno" ; then      
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_LASTLOG 1
-_ACEOF
-
-                else
-                        conf_lastlog_location=$withval
-                fi
-        
-
-fi; 
-
-
-echo "$as_me:$LINENO: checking if your system defines LASTLOG_FILE" >&5
-echo $ECHO_N "checking if your system defines LASTLOG_FILE... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <utmp.h>
-#ifdef HAVE_LASTLOG_H
-#  include <lastlog.h>
-#endif
-#ifdef HAVE_PATHS_H
-#  include <paths.h>
-#endif
-#ifdef HAVE_LOGIN_H
-# include <login.h>
-#endif
-        
-int
-main ()
-{
- char *lastlog = LASTLOG_FILE; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-                echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                echo "$as_me:$LINENO: checking if your system defines _PATH_LASTLOG" >&5
-echo $ECHO_N "checking if your system defines _PATH_LASTLOG... $ECHO_C" >&6
-                cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <utmp.h>
-#ifdef HAVE_LASTLOG_H
-#  include <lastlog.h>
-#endif
-#ifdef HAVE_PATHS_H
-#  include <paths.h>
-#endif
-                
-int
-main ()
-{
- char *lastlog = _PATH_LASTLOG; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-                        echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-                        system_lastlog_path=no
-                
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-        
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-
-if test -z "$conf_lastlog_location"; then
-        if test x"$system_lastlog_path" = x"no" ; then
-                for f in /var/log/lastlog /usr/adm/lastlog /var/adm/lastlog /etc/security/lastlog ; do
-                                if (test -d "$f" || test -f "$f") ; then
-                                        conf_lastlog_location=$f
-                                fi
-                done
-                if test -z "$conf_lastlog_location"; then
-                        { echo "$as_me:$LINENO: WARNING: ** Cannot find lastlog **" >&5
-echo "$as_me: WARNING: ** Cannot find lastlog **" >&2;}
-                                        fi
-        fi
-fi
-
-if test -n "$conf_lastlog_location"; then
-        cat >>confdefs.h <<_ACEOF
-@%:@define CONF_LASTLOG_FILE "$conf_lastlog_location"
-_ACEOF
-
-fi      
-
-echo "$as_me:$LINENO: checking if your system defines UTMP_FILE" >&5
-echo $ECHO_N "checking if your system defines UTMP_FILE... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <utmp.h>
-#ifdef HAVE_PATHS_H
-#  include <paths.h>
-#endif
-        
-int
-main ()
-{
- char *utmp = UTMP_FILE; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-          system_utmp_path=no 
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-if test -z "$conf_utmp_location"; then
-        if test x"$system_utmp_path" = x"no" ; then
-                for f in /etc/utmp /usr/adm/utmp /var/run/utmp; do
-                        if test -f $f ; then
-                                conf_utmp_location=$f
-                        fi
-                done
-                if test -z "$conf_utmp_location"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMP 1
-_ACEOF
-
-                fi
-        fi
-fi
-if test -n "$conf_utmp_location"; then
-        cat >>confdefs.h <<_ACEOF
-@%:@define CONF_UTMP_FILE "$conf_utmp_location"
-_ACEOF
-
-fi      
-
-echo "$as_me:$LINENO: checking if your system defines WTMP_FILE" >&5
-echo $ECHO_N "checking if your system defines WTMP_FILE... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <utmp.h>
-#ifdef HAVE_PATHS_H
-#  include <paths.h>
-#endif
-        
-int
-main ()
-{
- char *wtmp = WTMP_FILE; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-          system_wtmp_path=no 
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-if test -z "$conf_wtmp_location"; then
-        if test x"$system_wtmp_path" = x"no" ; then
-                for f in /usr/adm/wtmp /var/log/wtmp; do
-                        if test -f $f ; then
-                                conf_wtmp_location=$f
-                        fi
-                done
-                if test -z "$conf_wtmp_location"; then
-                        cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_WTMP 1
-_ACEOF
-
-                fi
-        fi
-fi
-if test -n "$conf_wtmp_location"; then
-        cat >>confdefs.h <<_ACEOF
-@%:@define CONF_WTMP_FILE "$conf_wtmp_location"
-_ACEOF
-
-fi      
-
-
-echo "$as_me:$LINENO: checking if your system defines UTMPX_FILE" >&5
-echo $ECHO_N "checking if your system defines UTMPX_FILE... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <utmp.h>
-#ifdef HAVE_UTMPX_H
-#include <utmpx.h>
-#endif
-#ifdef HAVE_PATHS_H
-#  include <paths.h>
-#endif
-        
-int
-main ()
-{
- char *utmpx = UTMPX_FILE; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-          system_utmpx_path=no 
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-if test -z "$conf_utmpx_location"; then
-        if test x"$system_utmpx_path" = x"no" ; then
-                cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_UTMPX 1
-_ACEOF
-
-        fi
-else
-        cat >>confdefs.h <<_ACEOF
-@%:@define CONF_UTMPX_FILE "$conf_utmpx_location"
-_ACEOF
-
-fi      
-
-echo "$as_me:$LINENO: checking if your system defines WTMPX_FILE" >&5
-echo $ECHO_N "checking if your system defines WTMPX_FILE... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-#line $LINENO "configure"
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#include <sys/types.h>
-#include <utmp.h>
-#ifdef HAVE_UTMPX_H
-#include <utmpx.h>
-#endif
-#ifdef HAVE_PATHS_H
-#  include <paths.h>
-#endif
-        
-int
-main ()
-{
- char *wtmpx = WTMPX_FILE; 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-         { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-   echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6 
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-          system_wtmpx_path=no 
-
-fi
-rm -f conftest.$ac_objext conftest.$ac_ext
-if test -z "$conf_wtmpx_location"; then
-        if test x"$system_wtmpx_path" = x"no" ; then
-                cat >>confdefs.h <<\_ACEOF
-@%:@define DISABLE_WTMPX 1
-_ACEOF
-
-        fi
-else
-        cat >>confdefs.h <<_ACEOF
-@%:@define CONF_WTMPX_FILE "$conf_wtmpx_location"
-_ACEOF
-
-fi      
-
-
-if test ! -z "$blibpath" ; then
-        LDFLAGS="$LDFLAGS $blibflags$blibpath"
-        { echo "$as_me:$LINENO: WARNING: Please check and edit blibpath in LDFLAGS in Makefile" >&5
-echo "$as_me: WARNING: Please check and edit blibpath in LDFLAGS in Makefile" >&2;}
-fi
-
-if test "$PAM_MSG" = yes ; then
-        LIBS=`echo $LIBS | sed 's/-lpam //'`
-fi
-if test "$ac_cv_lib_pam_pam_set_item" = yes ; then
-        LIBS=`echo $LIBS | sed 's/-ldl //'`
-fi
-
-
-                                        ac_config_files="$ac_config_files Makefile openbsd-compat/Makefile scard/Makefile ssh_prng_cmds"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
-  (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
-      sed -n \
-        "s/'/'\\\\''/g;
-          s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-      ;;
-    esac;
-} |
-  sed '
-     t clear
-     : clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-    cat confcache >$cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[         ]*VPATH[        ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[    ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[      ]*$//;
-}'
-fi
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_i=`echo "$ac_i" |
-         sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-  # 2. Add them.
-  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-done
-LIB@&t@OBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-
-# Support unset when possible.
-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-         X"$0" : 'X\(//\)$' \| \
-         X"$0" : 'X\(/\)$' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-          /^X\/\(\/\/\)$/{ s//\1/; q; }
-          /^X\/\(\/\).*/{ s//\1/; q; }
-          s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-         case $as_dir in
-         /*)
-           if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-             $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-             $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-             CONFIG_SHELL=$as_dir/$as_base
-             export CONFIG_SHELL
-             exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-           fi;;
-         esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='      ' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS="   $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX
-@%:@@%:@ Running $as_me. @%:@@%:@
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.57.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-_ACEOF
-
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
-  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
-  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
-  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_commands"; then
-  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-                   instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.57,
-  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  -*)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-    ac_need_defaults=false;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
-
-  *) ac_config_targets="$ac_config_targets $1" ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
-  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-fi
-
-_ACEOF
-
-
-
-
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_config_target in $ac_config_targets
-do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "openbsd-compat/Makefile" ) CONFIG_FILES="$CONFIG_FILES openbsd-compat/Makefile" ;;
-  "scard/Makefile" ) CONFIG_FILES="$CONFIG_FILES scard/Makefile" ;;
-  "ssh_prng_cmds" ) CONFIG_FILES="$CONFIG_FILES ssh_prng_cmds" ;;
-  "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
-}
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@build@,$build,;t t
-s,@build_cpu@,$build_cpu,;t t
-s,@build_vendor@,$build_vendor,;t t
-s,@build_os@,$build_os,;t t
-s,@host@,$host,;t t
-s,@host_cpu@,$host_cpu,;t t
-s,@host_vendor@,$host_vendor,;t t
-s,@host_os@,$host_os,;t t
-s,@CPP@,$CPP,;t t
-s,@RANLIB@,$RANLIB,;t t
-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@AR@,$AR,;t t
-s,@PERL@,$PERL,;t t
-s,@SED@,$SED,;t t
-s,@ENT@,$ENT,;t t
-s,@TEST_MINUS_S_SH@,$TEST_MINUS_S_SH,;t t
-s,@SH@,$SH,;t t
-s,@LOGIN_PROGRAM_FALLBACK@,$LOGIN_PROGRAM_FALLBACK,;t t
-s,@LD@,$LD,;t t
-s,@EGREP@,$EGREP,;t t
-s,@LIBWRAP@,$LIBWRAP,;t t
-s,@LIBPAM@,$LIBPAM,;t t
-s,@INSTALL_SSH_RAND_HELPER@,$INSTALL_SSH_RAND_HELPER,;t t
-s,@SSH_PRIVSEP_USER@,$SSH_PRIVSEP_USER,;t t
-s,@PROG_LS@,$PROG_LS,;t t
-s,@PROG_NETSTAT@,$PROG_NETSTAT,;t t
-s,@PROG_ARP@,$PROG_ARP,;t t
-s,@PROG_IFCONFIG@,$PROG_IFCONFIG,;t t
-s,@PROG_JSTAT@,$PROG_JSTAT,;t t
-s,@PROG_PS@,$PROG_PS,;t t
-s,@PROG_SAR@,$PROG_SAR,;t t
-s,@PROG_W@,$PROG_W,;t t
-s,@PROG_WHO@,$PROG_WHO,;t t
-s,@PROG_LAST@,$PROG_LAST,;t t
-s,@PROG_LASTLOG@,$PROG_LASTLOG,;t t
-s,@PROG_DF@,$PROG_DF,;t t
-s,@PROG_VMSTAT@,$PROG_VMSTAT,;t t
-s,@PROG_UPTIME@,$PROG_UPTIME,;t t
-s,@PROG_IPCS@,$PROG_IPCS,;t t
-s,@PROG_TAIL@,$PROG_TAIL,;t t
-s,@INSTALL_SSH_PRNG_CMDS@,$INSTALL_SSH_PRNG_CMDS,;t t
-s,@OPENSC_CONFIG@,$OPENSC_CONFIG,;t t
-s,@PRIVSEP_PATH@,$PRIVSEP_PATH,;t t
-s,@xauth_path@,$xauth_path,;t t
-s,@STRIP_OPT@,$STRIP_OPT,;t t
-s,@XAUTH_PATH@,$XAUTH_PATH,;t t
-s,@NROFF@,$NROFF,;t t
-s,@MANTYPE@,$MANTYPE,;t t
-s,@mansubdir@,$mansubdir,;t t
-s,@user_path@,$user_path,;t t
-s,@piddir@,$piddir,;t t
-s,@LIB@&t@OBJS@,$LIB@&t@OBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
-
-_ACEOF
-
-  cat >>$CONFIG_STATUS <<\_ACEOF
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-        ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-        ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
-  fi
-fi # test -n "$CONFIG_FILES"
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-        cat >$tmp/stdin
-        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$ac_file" : 'X\(//\)[^/]' \| \
-         X"$ac_file" : 'X\(//\)$' \| \
-         X"$ac_file" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-          /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-          /^X\(\/\/\)$/{ s//\1/; q; }
-          /^X\(\/\).*/{ s//\1/; q; }
-          s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$as_dir" : 'X\(//\)[^/]' \| \
-         X"$as_dir" : 'X\(//\)$' \| \
-         X"$as_dir" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-          /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-          /^X\(\/\/\)$/{ s//\1/; q; }
-          /^X\(\/\).*/{ s//\1/; q; }
-          s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-# absolute.
-ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
-ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
-  esac
-
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-                                     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-         # Absolute (can't be DOS-style, as IFS=:)
-         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         echo $f;;
-      *) # Relative
-         if test -f "$f"; then
-           # Build tree
-           echo $f
-         elif test -f "$srcdir/$f"; then
-           # Source tree
-           echo $srcdir/$f
-         else
-           # /dev/null tree
-           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
-
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([   ]*\)#\([        ]*define[       ][      ]*\)'
-ac_dB='[        ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([   ]*\)#\([        ]*\)undef\([    ][      ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-        cat >$tmp/stdin
-        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-         # Absolute (can't be DOS-style, as IFS=:)
-         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         echo $f;;
-      *) # Relative
-         if test -f "$f"; then
-           # Build tree
-           echo $f
-         elif test -f "$srcdir/$f"; then
-           # Source tree
-           echo $srcdir/$f
-         else
-           # /dev/null tree
-           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  # Remove the trailing spaces.
-  sed 's/[      ]*$//' $ac_file_inputs >$tmp/in
-
-_ACEOF
-
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h.  The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status.  Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\_ACEOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[    ]*#[    ]*define[       ][      ]*\([^  (][^    (]*\)\(([^)]*)\)[       ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-t end
-s,^[    ]*#[    ]*define[       ][      ]*\([^  ][^     ]*\)[   ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-_ACEOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless.  Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\_ACEOF
-s,^[    ]*#[    ]*undef[        ][      ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-_ACEOF
-
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo '  if grep "^[     ]*#[    ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo '  :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
-do
-  # Write a limited-size here document to $tmp/defines.sed.
-  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#define' lines.
-  echo '/^[     ]*#[    ]*define/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
-  rm -f conftest.defines
-  mv conftest.tail conftest.defines
-done
-rm -f conftest.defines
-echo '  fi # grep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
-  # Write a limited-size here document to $tmp/undefs.sed.
-  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#undef'
-  echo '/^[     ]*#[    ]*undef/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
-  rm -f conftest.undefs
-  mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    echo "/* Generated by configure.  */" >$tmp/config.h
-  else
-    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
-  fi
-  cat $tmp/in >>$tmp/config.h
-  rm -f $tmp/in
-  if test x"$ac_file" != x-; then
-    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
-      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$ac_file" : 'X\(//\)[^/]' \| \
-         X"$ac_file" : 'X\(//\)$' \| \
-         X"$ac_file" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-          /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-          /^X\(\/\/\)$/{ s//\1/; q; }
-          /^X\(\/\).*/{ s//\1/; q; }
-          s/.*/./; q'`
-      { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$as_dir" : 'X\(//\)[^/]' \| \
-         X"$as_dir" : 'X\(//\)$' \| \
-         X"$as_dir" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-          /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-          /^X\(\/\/\)$/{ s//\1/; q; }
-          /^X\(\/\).*/{ s//\1/; q; }
-          s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-      rm -f $ac_file
-      mv $tmp/config.h $ac_file
-    fi
-  else
-    cat $tmp/config.h
-    rm -f $tmp/config.h
-  fi
-done
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || { (exit 1); exit 1; }
-fi
-
-
-# Print summary of options
-
-# Someone please show me a better way :)
-A=`eval echo ${prefix}` ; A=`eval echo ${A}`
-B=`eval echo ${bindir}` ; B=`eval echo ${B}`
-C=`eval echo ${sbindir}` ; C=`eval echo ${C}`
-D=`eval echo ${sysconfdir}` ; D=`eval echo ${D}`
-E=`eval echo ${libexecdir}/ssh-askpass` ; E=`eval echo ${E}`
-F=`eval echo ${mandir}/${mansubdir}X` ; F=`eval echo ${F}`
-G=`eval echo ${piddir}` ; G=`eval echo ${G}`
-H=`eval echo ${PRIVSEP_PATH}` ; H=`eval echo ${H}`
-I=`eval echo ${user_path}` ; I=`eval echo ${I}`
-J=`eval echo ${superuser_path}` ; J=`eval echo ${J}`
-
-echo ""
-echo "OpenSSH has been configured with the following options:"
-echo "                     User binaries: $B"
-echo "                   System binaries: $C"
-echo "               Configuration files: $D"
-echo "                   Askpass program: $E"
-echo "                      Manual pages: $F"
-echo "                          PID file: $G"
-echo "  Privilege separation chroot path: $H"
-if test "$USES_LOGIN_CONF" = "yes" ; then
-echo "   At runtime, sshd will use the path defined in /etc/login.conf"
-else
-echo "            sshd default user PATH: $I"
-fi
-if test ! -z "$superuser_path" ; then
-echo "          sshd superuser user PATH: $J"
-fi
-echo "                    Manpage format: $MANTYPE"
-echo "                       PAM support: ${PAM_MSG}"
-echo "                KerberosIV support: $KRB4_MSG"
-echo "                 KerberosV support: $KRB5_MSG"
-echo "                 Smartcard support: $SCARD_MSG"
-echo "                       AFS support: $AFS_MSG"
-echo "                     S/KEY support: $SKEY_MSG"
-echo "              TCP Wrappers support: $TCPW_MSG"
-echo "              MD5 password support: $MD5_MSG"
-echo "       IP address in \$DISPLAY hack: $DISPLAY_HACK_MSG"
-echo "          Use IPv4 by default hack: $IPV4_HACK_MSG"
-echo "           Translate v4 in v6 hack: $IPV4_IN6_HACK_MSG"
-echo "                  BSD Auth support: $BSD_AUTH_MSG"
-echo "              Random number source: $RAND_MSG"
-if test ! -z "$USE_RAND_HELPER" ; then
-echo "     ssh-rand-helper collects from: $RAND_HELPER_MSG"
-fi
-
-echo ""
-
-echo "              Host: ${host}"
-echo "          Compiler: ${CC}"
-echo "    Compiler flags: ${CFLAGS}"
-echo "Preprocessor flags: ${CPPFLAGS}"
-echo "      Linker flags: ${LDFLAGS}"
-echo "         Libraries: ${LIBWRAP} ${LIBPAM} ${LIBS}"
-
-echo ""
-
-if test "x$PAM_MSG" = "xyes" ; then
-        echo "PAM is enabled. You may need to install a PAM control file "
-        echo "for sshd, otherwise password authentication may fail. "
-        echo "Example PAM control files can be found in the contrib/ " 
-        echo "subdirectory"
-        echo ""
-fi
-
-if test ! -z "$RAND_HELPER_CMDHASH" ; then
-        echo "WARNING: you are using the builtin random number collection "
-        echo "service. Please read WARNING.RNG and request that your OS "
-        echo "vendor includes kernel-based random number collection in "
-        echo "future versions of your OS."
-        echo ""
-fi
-
diff --git a/autom4te.cache/requests b/autom4te.cache/requests
deleted file mode 100644
index 72598fb0c..000000000
--- a/autom4te.cache/requests
+++ /dev/null
@@ -1,111 +0,0 @@
-# This file was created by autom4te.
-# It contains the lists of macros which have been traced.
-# It can be safely removed.
-
-@request = (
-             bless( [
-                      '0',
-                      1,
-                      [
-                        '/usr/share/autoconf'
-                      ],
-                      [
-                        '/usr/share/autoconf/autoconf/autoconf.m4f',
-                        'aclocal.m4',
-                        'configure.ac'
-                      ],
-                      {
-                        'm4_pattern_forbid' => 1,
-                        'AC_TYPE_OFF_T' => 1,
-                        'AC_C_VOLATILE' => 1,
-                        'AC_FUNC_CLOSEDIR_VOID' => 1,
-                        'AC_REPLACE_FNMATCH' => 1,
-                        'AC_PROG_LIBTOOL' => 1,
-                        'AC_FUNC_STAT' => 1,
-                        'AC_HEADER_TIME' => 1,
-                        'AC_FUNC_WAIT3' => 1,
-                        'AM_AUTOMAKE_VERSION' => 1,
-                        'AC_STRUCT_TM' => 1,
-                        'AC_FUNC_LSTAT' => 1,
-                        'AC_TYPE_MODE_T' => 1,
-                        'AC_FUNC_GETMNTENT' => 1,
-                        'AC_FUNC_STRTOD' => 1,
-                        'AC_CHECK_HEADERS' => 1,
-                        'AC_FUNC_STRNLEN' => 1,
-                        'AC_PROG_CXX' => 1,
-                        'AC_PATH_X' => 1,
-                        'AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK' => 1,
-                        'AC_PROG_AWK' => 1,
-                        'AC_HEADER_STDC' => 1,
-                        'AC_HEADER_MAJOR' => 1,
-                        'AC_FUNC_ERROR_AT_LINE' => 1,
-                        'AC_PROG_GCC_TRADITIONAL' => 1,
-                        'AC_LIBSOURCE' => 1,
-                        'AC_FUNC_MBRTOWC' => 1,
-                        'AC_STRUCT_ST_BLOCKS' => 1,
-                        'AC_TYPE_SIGNAL' => 1,
-                        'AC_TYPE_UID_T' => 1,
-                        'AC_CONFIG_AUX_DIR' => 1,
-                        'AC_PROG_MAKE_SET' => 1,
-                        'm4_pattern_allow' => 1,
-                        'AC_DEFINE_TRACE_LITERAL' => 1,
-                        'AC_FUNC_STRERROR_R' => 1,
-                        'AC_PROG_CC' => 1,
-                        'AC_DECL_SYS_SIGLIST' => 1,
-                        'AC_FUNC_FORK' => 1,
-                        'AC_FUNC_VPRINTF' => 1,
-                        'AC_FUNC_STRCOLL' => 1,
-                        'AC_PROG_YACC' => 1,
-                        'AC_INIT' => 1,
-                        'AC_STRUCT_TIMEZONE' => 1,
-                        'AC_FUNC_CHOWN' => 1,
-                        'AC_SUBST' => 1,
-                        'AC_FUNC_ALLOCA' => 1,
-                        'AC_CANONICAL_HOST' => 1,
-                        'AC_FUNC_GETPGRP' => 1,
-                        'AC_PROG_RANLIB' => 1,
-                        'AM_INIT_AUTOMAKE' => 1,
-                        'AC_FUNC_SETPGRP' => 1,
-                        'AC_CONFIG_SUBDIRS' => 1,
-                        'AC_FUNC_MMAP' => 1,
-                        'AC_FUNC_REALLOC' => 1,
-                        'AC_TYPE_SIZE_T' => 1,
-                        'AC_CHECK_TYPES' => 1,
-                        'AC_CHECK_MEMBERS' => 1,
-                        'AM_MAINTAINER_MODE' => 1,
-                        'AC_FUNC_UTIME_NULL' => 1,
-                        'AC_FUNC_SELECT_ARGTYPES' => 1,
-                        'AC_FUNC_STRFTIME' => 1,
-                        'AC_HEADER_STAT' => 1,
-                        'AC_C_INLINE' => 1,
-                        'AC_PROG_CPP' => 1,
-                        'AC_TYPE_PID_T' => 1,
-                        'AC_C_CONST' => 1,
-                        'AC_PROG_LEX' => 1,
-                        'AC_CONFIG_FILES' => 1,
-                        'include' => 1,
-                        'AC_FUNC_SETVBUF_REVERSED' => 1,
-                        'AC_PROG_INSTALL' => 1,
-                        'AM_GNU_GETTEXT' => 1,
-                        'AC_FUNC_OBSTACK' => 1,
-                        'AC_CHECK_LIB' => 1,
-                        'AC_FUNC_MALLOC' => 1,
-                        'AC_FUNC_GETGROUPS' => 1,
-                        'AC_FUNC_GETLOADAVG' => 1,
-                        'AH_OUTPUT' => 1,
-                        'AC_FUNC_FSEEKO' => 1,
-                        'AM_PROG_CC_C_O' => 1,
-                        'AM_CONDITIONAL' => 1,
-                        'AC_CANONICAL_SYSTEM' => 1,
-                        'AC_FUNC_MKTIME' => 1,
-                        'AC_CONFIG_HEADERS' => 1,
-                        'AC_HEADER_SYS_WAIT' => 1,
-                        'AC_FUNC_MEMCMP' => 1,
-                        'AC_PROG_LN_S' => 1,
-                        'm4_include' => 1,
-                        'AC_HEADER_DIRENT' => 1,
-                        'AC_CHECK_FUNCS' => 1
-                      }
-                    ], 'Request' )
-           );
-
diff --git a/autom4te.cache/traces.0 b/autom4te.cache/traces.0
deleted file mode 100644
index 8c9b72476..000000000
--- a/autom4te.cache/traces.0
+++ /dev/null
@@ -1,947 +0,0 @@
-m4trace:configure.ac:3: -1- AC_INIT
-m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?A[CHUM]_])
-m4trace:configure.ac:3: -1- m4_pattern_forbid([_AC_])
-m4trace:configure.ac:3: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS'])
-m4trace:configure.ac:3: -1- m4_pattern_allow([^AS_FLAGS$])
-m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?m4_])
-m4trace:configure.ac:3: -1- m4_pattern_forbid([^dnl$])
-m4trace:configure.ac:3: -1- m4_pattern_forbid([^_?AS_])
-m4trace:configure.ac:3: -1- AC_SUBST([SHELL], [${CONFIG_SHELL-/bin/sh}])
-m4trace:configure.ac:3: -1- AC_SUBST([PATH_SEPARATOR])
-m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_NAME], [m4_ifdef([AC_PACKAGE_NAME],      ['AC_PACKAGE_NAME'])])
-m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_TARNAME], [m4_ifdef([AC_PACKAGE_TARNAME],   ['AC_PACKAGE_TARNAME'])])
-m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_VERSION], [m4_ifdef([AC_PACKAGE_VERSION],   ['AC_PACKAGE_VERSION'])])
-m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_STRING], [m4_ifdef([AC_PACKAGE_STRING],    ['AC_PACKAGE_STRING'])])
-m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE_BUGREPORT], [m4_ifdef([AC_PACKAGE_BUGREPORT], ['AC_PACKAGE_BUGREPORT'])])
-m4trace:configure.ac:3: -1- AC_SUBST([exec_prefix], [NONE])
-m4trace:configure.ac:3: -1- AC_SUBST([prefix], [NONE])
-m4trace:configure.ac:3: -1- AC_SUBST([program_transform_name], [s,x,x,])
-m4trace:configure.ac:3: -1- AC_SUBST([bindir], ['${exec_prefix}/bin'])
-m4trace:configure.ac:3: -1- AC_SUBST([sbindir], ['${exec_prefix}/sbin'])
-m4trace:configure.ac:3: -1- AC_SUBST([libexecdir], ['${exec_prefix}/libexec'])
-m4trace:configure.ac:3: -1- AC_SUBST([datadir], ['${prefix}/share'])
-m4trace:configure.ac:3: -1- AC_SUBST([sysconfdir], ['${prefix}/etc'])
-m4trace:configure.ac:3: -1- AC_SUBST([sharedstatedir], ['${prefix}/com'])
-m4trace:configure.ac:3: -1- AC_SUBST([localstatedir], ['${prefix}/var'])
-m4trace:configure.ac:3: -1- AC_SUBST([libdir], ['${exec_prefix}/lib'])
-m4trace:configure.ac:3: -1- AC_SUBST([includedir], ['${prefix}/include'])
-m4trace:configure.ac:3: -1- AC_SUBST([oldincludedir], ['/usr/include'])
-m4trace:configure.ac:3: -1- AC_SUBST([infodir], ['${prefix}/info'])
-m4trace:configure.ac:3: -1- AC_SUBST([mandir], ['${prefix}/man'])
-m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME])
-m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */
-#undef PACKAGE_NAME])
-m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME])
-m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME])
-m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION])
-m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */
-#undef PACKAGE_VERSION])
-m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING])
-m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING])
-m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT])
-m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT])
-m4trace:configure.ac:3: -1- AC_SUBST([build_alias])
-m4trace:configure.ac:3: -1- AC_SUBST([host_alias])
-m4trace:configure.ac:3: -1- AC_SUBST([target_alias])
-m4trace:configure.ac:3: -1- AC_SUBST([DEFS])
-m4trace:configure.ac:3: -1- AC_SUBST([ECHO_C])
-m4trace:configure.ac:3: -1- AC_SUBST([ECHO_N])
-m4trace:configure.ac:3: -1- AC_SUBST([ECHO_T])
-m4trace:configure.ac:3: -1- AC_SUBST([LIBS])
-m4trace:configure.ac:6: -1- AC_CONFIG_HEADERS([config.h])
-m4trace:configure.ac:7: -1- AC_PROG_CC
-m4trace:configure.ac:7: -1- AC_SUBST([CC])
-m4trace:configure.ac:7: -1- AC_SUBST([CFLAGS])
-m4trace:configure.ac:7: -1- AC_SUBST([LDFLAGS])
-m4trace:configure.ac:7: -1- AC_SUBST([CPPFLAGS])
-m4trace:configure.ac:7: -1- AC_SUBST([CC])
-m4trace:configure.ac:7: -1- AC_SUBST([ac_ct_CC])
-m4trace:configure.ac:7: -1- AC_SUBST([CC])
-m4trace:configure.ac:7: -1- AC_SUBST([ac_ct_CC])
-m4trace:configure.ac:7: -1- AC_SUBST([CC])
-m4trace:configure.ac:7: -1- AC_SUBST([CC])
-m4trace:configure.ac:7: -1- AC_SUBST([ac_ct_CC])
-m4trace:configure.ac:7: -1- AC_SUBST([EXEEXT], [$ac_cv_exeext])
-m4trace:configure.ac:7: -1- AC_SUBST([OBJEXT], [$ac_cv_objext])
-m4trace:configure.ac:8: -1- AC_CANONICAL_HOST
-m4trace:configure.ac:8: -1- AC_SUBST([build], [$ac_cv_build])
-m4trace:configure.ac:8: -1- AC_SUBST([build_cpu], [`echo $ac_cv_build | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\1/'`])
-m4trace:configure.ac:8: -1- AC_SUBST([build_vendor], [`echo $ac_cv_build | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\2/'`])
-m4trace:configure.ac:8: -1- AC_SUBST([build_os], [`echo $ac_cv_build | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\3/'`])
-m4trace:configure.ac:8: -1- AC_SUBST([host], [$ac_cv_host])
-m4trace:configure.ac:8: -1- AC_SUBST([host_cpu], [`echo $ac_cv_host | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\1/'`])
-m4trace:configure.ac:8: -1- AC_SUBST([host_vendor], [`echo $ac_cv_host | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\2/'`])
-m4trace:configure.ac:8: -1- AC_SUBST([host_os], [`echo $ac_cv_host | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\3/'`])
-m4trace:configure.ac:9: -1- AC_DEFINE_TRACE_LITERAL([WORDS_BIGENDIAN])
-m4trace:configure.ac:9: -1- AH_OUTPUT([WORDS_BIGENDIAN], [/* Define to 1 if your processor stores words with the most significant byte
-   first (like Motorola and SPARC, unlike Intel and VAX). */
-#undef WORDS_BIGENDIAN])
-m4trace:configure.ac:12: -1- AC_PROG_CPP
-m4trace:configure.ac:12: -1- AC_SUBST([CPP])
-m4trace:configure.ac:12: -1- AC_SUBST([CPPFLAGS])
-m4trace:configure.ac:12: -1- AC_SUBST([CPP])
-m4trace:configure.ac:13: -1- AC_PROG_RANLIB
-m4trace:configure.ac:13: -1- AC_SUBST([RANLIB])
-m4trace:configure.ac:13: -1- AC_SUBST([ac_ct_RANLIB])
-m4trace:configure.ac:14: -1- AC_PROG_INSTALL
-m4trace:configure.ac:14: -1- AC_SUBST([INSTALL_PROGRAM])
-m4trace:configure.ac:14: -1- AC_SUBST([INSTALL_SCRIPT])
-m4trace:configure.ac:14: -1- AC_SUBST([INSTALL_DATA])
-m4trace:configure.ac:15: -1- AC_SUBST([AR], [$ac_cv_path_AR])
-m4trace:configure.ac:16: -1- AC_SUBST([PERL], [$ac_cv_path_PERL])
-m4trace:configure.ac:17: -1- AC_SUBST([SED], [$ac_cv_path_SED])
-m4trace:configure.ac:18: -1- AC_SUBST([PERL])
-m4trace:configure.ac:19: -1- AC_SUBST([ENT], [$ac_cv_path_ENT])
-m4trace:configure.ac:20: -1- AC_SUBST([ENT])
-m4trace:configure.ac:21: -1- AC_SUBST([TEST_MINUS_S_SH], [$ac_cv_path_TEST_MINUS_S_SH])
-m4trace:configure.ac:22: -1- AC_SUBST([TEST_MINUS_S_SH], [$ac_cv_path_TEST_MINUS_S_SH])
-m4trace:configure.ac:23: -1- AC_SUBST([TEST_MINUS_S_SH], [$ac_cv_path_TEST_MINUS_S_SH])
-m4trace:configure.ac:24: -1- AC_SUBST([SH], [$ac_cv_path_SH])
-m4trace:configure.ac:27: -1- AC_DEFINE_TRACE_LITERAL([_FILE_OFFSET_BITS])
-m4trace:configure.ac:27: -1- AH_OUTPUT([_FILE_OFFSET_BITS], [/* Number of bits in a file offset, on hosts where this is settable. */
-#undef _FILE_OFFSET_BITS])
-m4trace:configure.ac:27: -1- AC_DEFINE_TRACE_LITERAL([_LARGE_FILES])
-m4trace:configure.ac:27: -1- AH_OUTPUT([_LARGE_FILES], [/* Define for large files, on AIX-style hosts. */
-#undef _LARGE_FILES])
-m4trace:configure.ac:35: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_PROGRAM_FALLBACK])
-m4trace:configure.ac:38: -1- AC_SUBST([LOGIN_PROGRAM_FALLBACK], [$ac_cv_path_LOGIN_PROGRAM_FALLBACK])
-m4trace:configure.ac:40: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_PROGRAM_FALLBACK])
-m4trace:configure.ac:47: -1- AC_SUBST([LD])
-m4trace:configure.ac:49: -1- AC_C_INLINE
-m4trace:configure.ac:49: -1- AC_DEFINE_TRACE_LITERAL([inline])
-m4trace:configure.ac:49: -1- AH_OUTPUT([inline], [/* Define as `__inline\' if that\'s what the C compiler calls it, or to nothing
-   if it is not supported. */
-#undef inline])
-m4trace:configure.ac:49: -1- AC_DEFINE_TRACE_LITERAL([inline])
-m4trace:configure.ac:83: -1- AC_DEFINE_TRACE_LITERAL([WITH_AIXAUTHENTICATE])
-m4trace:configure.ac:83: -1- AC_CHECK_LIB([s], [authenticate], [ AC_DEFINE(WITH_AIXAUTHENTICATE)
-                                LIBS="$LIBS -ls"
-                        ])
-m4trace:configure.ac:83: -1- AC_DEFINE_TRACE_LITERAL([WITH_AIXAUTHENTICATE])
-m4trace:configure.ac:84: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_GETADDRINFO])
-m4trace:configure.ac:85: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_REALPATH])
-m4trace:configure.ac:87: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_LASTLOG])
-m4trace:configure.ac:88: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NEEDS_UTMPX])
-m4trace:configure.ac:89: -1- AC_DEFINE_TRACE_LITERAL([SETPROCTITLE_STRATEGY])
-m4trace:configure.ac:90: -1- AC_DEFINE_TRACE_LITERAL([SETPROCTITLE_PS_PADDING])
-m4trace:configure.ac:95: -1- AC_DEFINE_TRACE_LITERAL([HAVE_CYGWIN])
-m4trace:configure.ac:96: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:97: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_SHADOW])
-m4trace:configure.ac:98: -1- AC_DEFINE_TRACE_LITERAL([IPV4_DEFAULT])
-m4trace:configure.ac:99: -1- AC_DEFINE_TRACE_LITERAL([IP_TOS_IS_BROKEN])
-m4trace:configure.ac:100: -1- AC_DEFINE_TRACE_LITERAL([NO_X11_UNIX_SOCKETS])
-m4trace:configure.ac:101: -1- AC_DEFINE_TRACE_LITERAL([NO_IPPORT_RESERVED_CONCEPT])
-m4trace:configure.ac:102: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_FD_PASSING])
-m4trace:configure.ac:103: -1- AC_DEFINE_TRACE_LITERAL([SETGROUPS_NOOP])
-m4trace:configure.ac:106: -1- AC_DEFINE_TRACE_LITERAL([IP_TOS_IS_BROKEN])
-m4trace:configure.ac:118: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_GETADDRINFO])
-m4trace:configure.ac:126: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SECUREWARE])
-m4trace:configure.ac:127: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:128: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NO_ENDOPT])
-m4trace:configure.ac:129: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NEEDS_UTMPX])
-m4trace:configure.ac:130: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_SHADOW])
-m4trace:configure.ac:131: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMP])
-m4trace:configure.ac:132: -1- AC_DEFINE_TRACE_LITERAL([SETPROCTITLE_STRATEGY])
-m4trace:configure.ac:134: -1- AC_CHECK_LIB([xnet], [t_error], [], [{ { echo "$as_me:$LINENO: error: *** -lxnet needed on HP-UX - check config.log ***" >&5
-echo "$as_me: error: *** -lxnet needed on HP-UX - check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }])
-m4trace:configure.ac:134: -1- AH_OUTPUT([HAVE_LIBXNET], [/* Define to 1 if you have the `xnet\' library (-lxnet). */
-#undef HAVE_LIBXNET])
-m4trace:configure.ac:134: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBXNET])
-m4trace:configure.ac:143: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:144: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NO_ENDOPT])
-m4trace:configure.ac:145: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NEEDS_UTMPX])
-m4trace:configure.ac:146: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_SHADOW])
-m4trace:configure.ac:147: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMP])
-m4trace:configure.ac:148: -1- AC_DEFINE_TRACE_LITERAL([SETPROCTITLE_STRATEGY])
-m4trace:configure.ac:150: -1- AC_CHECK_LIB([xnet], [t_error], [], [{ { echo "$as_me:$LINENO: error: *** -lxnet needed on HP-UX - check config.log ***" >&5
-echo "$as_me: error: *** -lxnet needed on HP-UX - check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }])
-m4trace:configure.ac:150: -1- AH_OUTPUT([HAVE_LIBXNET], [/* Define to 1 if you have the `xnet\' library (-lxnet). */
-#undef HAVE_LIBXNET])
-m4trace:configure.ac:150: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBXNET])
-m4trace:configure.ac:155: -1- AC_DEFINE_TRACE_LITERAL([PAM_SUN_CODEBASE])
-m4trace:configure.ac:156: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:157: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NO_ENDOPT])
-m4trace:configure.ac:158: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NEEDS_UTMPX])
-m4trace:configure.ac:159: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_SHADOW])
-m4trace:configure.ac:160: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMP])
-m4trace:configure.ac:161: -1- AC_DEFINE_TRACE_LITERAL([SETPROCTITLE_STRATEGY])
-m4trace:configure.ac:163: -1- AC_CHECK_LIB([xnet], [t_error], [], [{ { echo "$as_me:$LINENO: error: *** -lxnet needed on HP-UX - check config.log ***" >&5
-echo "$as_me: error: *** -lxnet needed on HP-UX - check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }])
-m4trace:configure.ac:163: -1- AH_OUTPUT([HAVE_LIBXNET], [/* Define to 1 if you have the `xnet\' library (-lxnet). */
-#undef HAVE_LIBXNET])
-m4trace:configure.ac:163: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBXNET])
-m4trace:configure.ac:169: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_INET_NTOA])
-m4trace:configure.ac:170: -1- AC_DEFINE_TRACE_LITERAL([WITH_ABBREV_NO_TTY])
-m4trace:configure.ac:176: -1- AC_DEFINE_TRACE_LITERAL([WITH_IRIX_ARRAY])
-m4trace:configure.ac:177: -1- AC_DEFINE_TRACE_LITERAL([WITH_IRIX_PROJECT])
-m4trace:configure.ac:178: -1- AC_DEFINE_TRACE_LITERAL([WITH_IRIX_AUDIT])
-m4trace:configure.ac:179: -1- AC_DEFINE_TRACE_LITERAL([WITH_IRIX_JOBS])
-m4trace:configure.ac:180: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_INET_NTOA])
-m4trace:configure.ac:181: -1- AC_DEFINE_TRACE_LITERAL([WITH_ABBREV_NO_TTY])
-m4trace:configure.ac:186: -1- AC_DEFINE_TRACE_LITERAL([DONT_TRY_OTHER_AF])
-m4trace:configure.ac:187: -1- AC_DEFINE_TRACE_LITERAL([PAM_TTY_KLUDGE])
-m4trace:configure.ac:188: -1- AC_DEFINE_TRACE_LITERAL([SETPROCTITLE_STRATEGY])
-m4trace:configure.ac:189: -1- AC_DEFINE_TRACE_LITERAL([SETPROCTITLE_PS_PADDING])
-m4trace:configure.ac:193: -1- AC_DEFINE_TRACE_LITERAL([HAVE_NEWS4])
-m4trace:configure.ac:208: -1- AC_DEFINE_TRACE_LITERAL([HAVE_NEXT])
-m4trace:configure.ac:209: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_REALPATH])
-m4trace:configure.ac:210: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:211: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_SAVED_UIDS])
-m4trace:configure.ac:219: -1- AC_DEFINE_TRACE_LITERAL([PAM_SUN_CODEBASE])
-m4trace:configure.ac:220: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NEEDS_UTMPX])
-m4trace:configure.ac:221: -1- AC_DEFINE_TRACE_LITERAL([LOGIN_NEEDS_TERM])
-m4trace:configure.ac:222: -1- AC_DEFINE_TRACE_LITERAL([PAM_TTY_KLUDGE])
-m4trace:configure.ac:223: -1- AC_DEFINE_TRACE_LITERAL([STREAMS_PUSH_ACQUIRES_CTTY])
-m4trace:configure.ac:230: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMP])
-m4trace:configure.ac:231: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_WTMP])
-m4trace:configure.ac:238: -1- AC_CHECK_FUNCS([getpwanam])
-m4trace:configure.ac:238: -1- AH_OUTPUT([HAVE_GETPWANAM], [/* Define to 1 if you have the `getpwanam\' function. */
-#undef HAVE_GETPWANAM])
-m4trace:configure.ac:239: -1- AC_DEFINE_TRACE_LITERAL([PAM_SUN_CODEBASE])
-m4trace:configure.ac:243: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:249: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:256: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:257: -1- AC_DEFINE_TRACE_LITERAL([IP_TOS_IS_BROKEN])
-m4trace:configure.ac:265: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:270: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:282: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_SYS_TERMIO_H])
-m4trace:configure.ac:283: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:284: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SECUREWARE])
-m4trace:configure.ac:285: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_SHADOW])
-m4trace:configure.ac:286: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_SAVED_UIDS])
-m4trace:configure.ac:287: -1- AC_CHECK_FUNCS([getluid setluid])
-m4trace:configure.ac:287: -1- AH_OUTPUT([HAVE_GETLUID], [/* Define to 1 if you have the `getluid\' function. */
-#undef HAVE_GETLUID])
-m4trace:configure.ac:287: -1- AH_OUTPUT([HAVE_SETLUID], [/* Define to 1 if you have the `setluid\' function. */
-#undef HAVE_SETLUID])
-m4trace:configure.ac:299: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:300: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SECUREWARE])
-m4trace:configure.ac:301: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_SHADOW])
-m4trace:configure.ac:302: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_FD_PASSING])
-m4trace:configure.ac:303: -1- AC_CHECK_FUNCS([getluid setluid])
-m4trace:configure.ac:303: -1- AH_OUTPUT([HAVE_GETLUID], [/* Define to 1 if you have the `getluid\' function. */
-#undef HAVE_GETLUID])
-m4trace:configure.ac:303: -1- AH_OUTPUT([HAVE_SETLUID], [/* Define to 1 if you have the `setluid\' function. */
-#undef HAVE_SETLUID])
-m4trace:configure.ac:307: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:308: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_FD_PASSING])
-m4trace:configure.ac:314: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:315: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_FD_PASSING])
-m4trace:configure.ac:316: -1- AC_DEFINE_TRACE_LITERAL([NO_SSH_LASTLOG])
-m4trace:configure.ac:336: -1- AC_DEFINE_TRACE_LITERAL([HAVE_OSF_SIA])
-m4trace:configure.ac:337: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_LOGIN])
-m4trace:configure.ac:338: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_FD_PASSING])
-m4trace:configure.ac:344: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_FD_PASSING])
-m4trace:configure.ac:348: -1- AC_DEFINE_TRACE_LITERAL([USE_PIPES])
-m4trace:configure.ac:349: -1- AC_DEFINE_TRACE_LITERAL([NO_X11_UNIX_SOCKETS])
-m4trace:configure.ac:350: -1- AC_DEFINE_TRACE_LITERAL([MISSING_NFDBITS])
-m4trace:configure.ac:351: -1- AC_DEFINE_TRACE_LITERAL([MISSING_HOWMANY])
-m4trace:configure.ac:352: -1- AC_DEFINE_TRACE_LITERAL([MISSING_FD_MASK])
-m4trace:configure.ac:400: -1- AC_CHECK_HEADERS([bstring.h crypt.h endian.h floatingpoint.h \
-        getopt.h glob.h ia.h lastlog.h libgen.h limits.h login.h \
-        login_cap.h maillock.h netdb.h netgroup.h \
-        netinet/in_systm.h paths.h pty.h readpassphrase.h \
-        rpc/types.h security/pam_appl.h shadow.h stddef.h stdint.h \
-        strings.h sys/bitypes.h sys/bsdtty.h sys/cdefs.h \
-        sys/mman.h sys/pstat.h sys/select.h sys/stat.h \
-        sys/stropts.h sys/sysmacros.h sys/time.h sys/timers.h \
-        sys/un.h time.h tmpdir.h ttyent.h usersec.h \
-        util.h utime.h utmp.h utmpx.h])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_BSTRING_H], [/* Define to 1 if you have the <bstring.h> header file. */
-#undef HAVE_BSTRING_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_CRYPT_H], [/* Define to 1 if you have the <crypt.h> header file. */
-#undef HAVE_CRYPT_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_ENDIAN_H], [/* Define to 1 if you have the <endian.h> header file. */
-#undef HAVE_ENDIAN_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_FLOATINGPOINT_H], [/* Define to 1 if you have the <floatingpoint.h> header file. */
-#undef HAVE_FLOATINGPOINT_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_GETOPT_H], [/* Define to 1 if you have the <getopt.h> header file. */
-#undef HAVE_GETOPT_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_GLOB_H], [/* Define to 1 if you have the <glob.h> header file. */
-#undef HAVE_GLOB_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_IA_H], [/* Define to 1 if you have the <ia.h> header file. */
-#undef HAVE_IA_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_LASTLOG_H], [/* Define to 1 if you have the <lastlog.h> header file. */
-#undef HAVE_LASTLOG_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_LIBGEN_H], [/* Define to 1 if you have the <libgen.h> header file. */
-#undef HAVE_LIBGEN_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_LIMITS_H], [/* Define to 1 if you have the <limits.h> header file. */
-#undef HAVE_LIMITS_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_LOGIN_H], [/* Define to 1 if you have the <login.h> header file. */
-#undef HAVE_LOGIN_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_LOGIN_CAP_H], [/* Define to 1 if you have the <login_cap.h> header file. */
-#undef HAVE_LOGIN_CAP_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_MAILLOCK_H], [/* Define to 1 if you have the <maillock.h> header file. */
-#undef HAVE_MAILLOCK_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_NETDB_H], [/* Define to 1 if you have the <netdb.h> header file. */
-#undef HAVE_NETDB_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_NETGROUP_H], [/* Define to 1 if you have the <netgroup.h> header file. */
-#undef HAVE_NETGROUP_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_NETINET_IN_SYSTM_H], [/* Define to 1 if you have the <netinet/in_systm.h> header file. */
-#undef HAVE_NETINET_IN_SYSTM_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_PATHS_H], [/* Define to 1 if you have the <paths.h> header file. */
-#undef HAVE_PATHS_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_PTY_H], [/* Define to 1 if you have the <pty.h> header file. */
-#undef HAVE_PTY_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_READPASSPHRASE_H], [/* Define to 1 if you have the <readpassphrase.h> header file. */
-#undef HAVE_READPASSPHRASE_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_RPC_TYPES_H], [/* Define to 1 if you have the <rpc/types.h> header file. */
-#undef HAVE_RPC_TYPES_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SECURITY_PAM_APPL_H], [/* Define to 1 if you have the <security/pam_appl.h> header file. */
-#undef HAVE_SECURITY_PAM_APPL_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SHADOW_H], [/* Define to 1 if you have the <shadow.h> header file. */
-#undef HAVE_SHADOW_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_STDDEF_H], [/* Define to 1 if you have the <stddef.h> header file. */
-#undef HAVE_STDDEF_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_STDINT_H], [/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_STRINGS_H], [/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SYS_BITYPES_H], [/* Define to 1 if you have the <sys/bitypes.h> header file. */
-#undef HAVE_SYS_BITYPES_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SYS_BSDTTY_H], [/* Define to 1 if you have the <sys/bsdtty.h> header file. */
-#undef HAVE_SYS_BSDTTY_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SYS_CDEFS_H], [/* Define to 1 if you have the <sys/cdefs.h> header file. */
-#undef HAVE_SYS_CDEFS_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SYS_MMAN_H], [/* Define to 1 if you have the <sys/mman.h> header file. */
-#undef HAVE_SYS_MMAN_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SYS_PSTAT_H], [/* Define to 1 if you have the <sys/pstat.h> header file. */
-#undef HAVE_SYS_PSTAT_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SYS_SELECT_H], [/* Define to 1 if you have the <sys/select.h> header file. */
-#undef HAVE_SYS_SELECT_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SYS_STAT_H], [/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SYS_STROPTS_H], [/* Define to 1 if you have the <sys/stropts.h> header file. */
-#undef HAVE_SYS_STROPTS_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SYS_SYSMACROS_H], [/* Define to 1 if you have the <sys/sysmacros.h> header file. */
-#undef HAVE_SYS_SYSMACROS_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SYS_TIME_H], [/* Define to 1 if you have the <sys/time.h> header file. */
-#undef HAVE_SYS_TIME_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SYS_TIMERS_H], [/* Define to 1 if you have the <sys/timers.h> header file. */
-#undef HAVE_SYS_TIMERS_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SYS_UN_H], [/* Define to 1 if you have the <sys/un.h> header file. */
-#undef HAVE_SYS_UN_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_TIME_H], [/* Define to 1 if you have the <time.h> header file. */
-#undef HAVE_TIME_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_TMPDIR_H], [/* Define to 1 if you have the <tmpdir.h> header file. */
-#undef HAVE_TMPDIR_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_TTYENT_H], [/* Define to 1 if you have the <ttyent.h> header file. */
-#undef HAVE_TTYENT_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_USERSEC_H], [/* Define to 1 if you have the <usersec.h> header file. */
-#undef HAVE_USERSEC_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_UTIL_H], [/* Define to 1 if you have the <util.h> header file. */
-#undef HAVE_UTIL_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_UTIME_H], [/* Define to 1 if you have the <utime.h> header file. */
-#undef HAVE_UTIME_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_UTMP_H], [/* Define to 1 if you have the <utmp.h> header file. */
-#undef HAVE_UTMP_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_UTMPX_H], [/* Define to 1 if you have the <utmpx.h> header file. */
-#undef HAVE_UTMPX_H])
-m4trace:configure.ac:400: -1- AC_HEADER_STDC
-m4trace:configure.ac:400: -1- AC_SUBST([EGREP])
-m4trace:configure.ac:400: -1- AC_DEFINE_TRACE_LITERAL([STDC_HEADERS])
-m4trace:configure.ac:400: -1- AH_OUTPUT([STDC_HEADERS], [/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS])
-m4trace:configure.ac:400: -1- AC_CHECK_HEADERS([sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-                  inttypes.h stdint.h unistd.h], [], [], [$ac_includes_default])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SYS_TYPES_H], [/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_SYS_STAT_H], [/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_STDLIB_H], [/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_STRING_H], [/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_MEMORY_H], [/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_STRINGS_H], [/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_INTTYPES_H], [/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_STDINT_H], [/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H])
-m4trace:configure.ac:400: -1- AH_OUTPUT([HAVE_UNISTD_H], [/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H])
-m4trace:configure.ac:403: -2- AC_CHECK_LIB([nsl], [yp_match])
-m4trace:configure.ac:403: -2- AH_OUTPUT([HAVE_LIBNSL], [/* Define to 1 if you have the `nsl\' library (-lnsl). */
-#undef HAVE_LIBNSL])
-m4trace:configure.ac:403: -2- AC_DEFINE_TRACE_LITERAL([HAVE_LIBNSL])
-m4trace:configure.ac:404: -2- AC_CHECK_LIB([socket], [setsockopt])
-m4trace:configure.ac:404: -2- AH_OUTPUT([HAVE_LIBSOCKET], [/* Define to 1 if you have the `socket\' library (-lsocket). */
-#undef HAVE_LIBSOCKET])
-m4trace:configure.ac:404: -2- AC_DEFINE_TRACE_LITERAL([HAVE_LIBSOCKET])
-m4trace:configure.ac:409: -1- AC_CHECK_LIB([rpc], [innetgr], [LIBS="-lrpc -lyp -lrpc $LIBS" ], [], [-lyp -lrpc])
-m4trace:configure.ac:414: -2- AC_CHECK_LIB([gen], [getspnam], [LIBS="$LIBS -lgen"])
-m4trace:configure.ac:456: -1- AC_CHECK_LIB([z], [deflate], [], [{ { echo "$as_me:$LINENO: error: *** zlib missing - please install first or check config.log ***" >&5
-echo "$as_me: error: *** zlib missing - please install first or check config.log ***" >&2;}
-   { (exit 1); exit 1; }; }])
-m4trace:configure.ac:456: -1- AH_OUTPUT([HAVE_LIBZ], [/* Define to 1 if you have the `z\' library (-lz). */
-#undef HAVE_LIBZ])
-m4trace:configure.ac:456: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBZ])
-m4trace:configure.ac:461: -1- AC_CHECK_LIB([resolv], [strcasecmp], [LIBS="$LIBS -lresolv"])
-m4trace:configure.ac:465: -1- AC_CHECK_LIB([c89], [utimes], [AC_DEFINE(HAVE_UTIMES)
-                                        LIBS="$LIBS -lc89"])
-m4trace:configure.ac:465: -1- AC_DEFINE_TRACE_LITERAL([HAVE_UTIMES])
-m4trace:configure.ac:468: -1- AC_CHECK_HEADERS([libutil.h])
-m4trace:configure.ac:468: -1- AH_OUTPUT([HAVE_LIBUTIL_H], [/* Define to 1 if you have the <libutil.h> header file. */
-#undef HAVE_LIBUTIL_H])
-m4trace:configure.ac:469: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LOGIN])
-m4trace:configure.ac:470: -1- AC_CHECK_FUNCS([logout updwtmp logwtmp])
-m4trace:configure.ac:470: -1- AH_OUTPUT([HAVE_LOGOUT], [/* Define to 1 if you have the `logout\' function. */
-#undef HAVE_LOGOUT])
-m4trace:configure.ac:470: -1- AH_OUTPUT([HAVE_UPDWTMP], [/* Define to 1 if you have the `updwtmp\' function. */
-#undef HAVE_UPDWTMP])
-m4trace:configure.ac:470: -1- AH_OUTPUT([HAVE_LOGWTMP], [/* Define to 1 if you have the `logwtmp\' function. */
-#undef HAVE_LOGWTMP])
-m4trace:configure.ac:472: -1- AC_FUNC_STRFTIME
-m4trace:configure.ac:472: -1- AC_CHECK_FUNCS([strftime], [], [# strftime is in -lintl on SCO UNIX.
-AC_CHECK_LIB(intl, strftime,
-             [AC_DEFINE(HAVE_STRFTIME)
-LIBS="-lintl $LIBS"])])
-m4trace:configure.ac:472: -1- AH_OUTPUT([HAVE_STRFTIME], [/* Define to 1 if you have the `strftime\' function. */
-#undef HAVE_STRFTIME])
-m4trace:configure.ac:472: -1- AC_CHECK_LIB([intl], [strftime], [AC_DEFINE(HAVE_STRFTIME)
-LIBS="-lintl $LIBS"])
-m4trace:configure.ac:472: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRFTIME])
-m4trace:configure.ac:490: -1- AC_DEFINE_TRACE_LITERAL([GLOB_HAS_ALTDIRFUNC])
-m4trace:configure.ac:506: -1- AC_DEFINE_TRACE_LITERAL([GLOB_HAS_GL_MATCHC])
-m4trace:configure.ac:520: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_ONE_BYTE_DIRENT_D_NAME])
-m4trace:configure.ac:553: -1- AC_DEFINE_TRACE_LITERAL([SKEY])
-m4trace:configure.ac:607: -1- AC_DEFINE_TRACE_LITERAL([LIBWRAP])
-m4trace:configure.ac:607: -1- AC_SUBST([LIBWRAP])
-m4trace:configure.ac:622: -1- AC_CHECK_FUNCS([\
-        arc4random __b64_ntop b64_ntop __b64_pton b64_pton basename bcopy \
-        bindresvport_sa clock fchmod fchown freeaddrinfo futimes \
-        gai_strerror getaddrinfo getcwd getgrouplist getnameinfo getopt \
-        getpeereid _getpty getrlimit getrusage getttyent glob inet_aton \
-        inet_ntoa inet_ntop innetgr login_getcapbool md5_crypt memmove \
-        mkdtemp mmap ngetaddrinfo nsleep ogetaddrinfo openpty pstat \
-        readpassphrase realpath recvmsg rresvport_af sendmsg setdtablesize \
-        setegid setenv seteuid setgroups setlogin setpcred setproctitle \
-        setresgid setreuid setrlimit setsid setvbuf sigaction sigvec \
-        snprintf socketpair strerror strlcat strlcpy strmode strnvis \
-        sysconf tcgetpgrp truncate utimes vhangup vsnprintf waitpid \
-])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_ARC4RANDOM], [/* Define to 1 if you have the `arc4random\' function. */
-#undef HAVE_ARC4RANDOM])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE___B64_NTOP], [/* Define to 1 if you have the `__b64_ntop\' function. */
-#undef HAVE___B64_NTOP])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_B64_NTOP], [/* Define to 1 if you have the `b64_ntop\' function. */
-#undef HAVE_B64_NTOP])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE___B64_PTON], [/* Define to 1 if you have the `__b64_pton\' function. */
-#undef HAVE___B64_PTON])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_B64_PTON], [/* Define to 1 if you have the `b64_pton\' function. */
-#undef HAVE_B64_PTON])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_BASENAME], [/* Define to 1 if you have the `basename\' function. */
-#undef HAVE_BASENAME])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_BCOPY], [/* Define to 1 if you have the `bcopy\' function. */
-#undef HAVE_BCOPY])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_BINDRESVPORT_SA], [/* Define to 1 if you have the `bindresvport_sa\' function. */
-#undef HAVE_BINDRESVPORT_SA])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_CLOCK], [/* Define to 1 if you have the `clock\' function. */
-#undef HAVE_CLOCK])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_FCHMOD], [/* Define to 1 if you have the `fchmod\' function. */
-#undef HAVE_FCHMOD])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_FCHOWN], [/* Define to 1 if you have the `fchown\' function. */
-#undef HAVE_FCHOWN])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_FREEADDRINFO], [/* Define to 1 if you have the `freeaddrinfo\' function. */
-#undef HAVE_FREEADDRINFO])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_FUTIMES], [/* Define to 1 if you have the `futimes\' function. */
-#undef HAVE_FUTIMES])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_GAI_STRERROR], [/* Define to 1 if you have the `gai_strerror\' function. */
-#undef HAVE_GAI_STRERROR])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_GETADDRINFO], [/* Define to 1 if you have the `getaddrinfo\' function. */
-#undef HAVE_GETADDRINFO])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_GETCWD], [/* Define to 1 if you have the `getcwd\' function. */
-#undef HAVE_GETCWD])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_GETGROUPLIST], [/* Define to 1 if you have the `getgrouplist\' function. */
-#undef HAVE_GETGROUPLIST])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_GETNAMEINFO], [/* Define to 1 if you have the `getnameinfo\' function. */
-#undef HAVE_GETNAMEINFO])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_GETOPT], [/* Define to 1 if you have the `getopt\' function. */
-#undef HAVE_GETOPT])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_GETPEEREID], [/* Define to 1 if you have the `getpeereid\' function. */
-#undef HAVE_GETPEEREID])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE__GETPTY], [/* Define to 1 if you have the `_getpty\' function. */
-#undef HAVE__GETPTY])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_GETRLIMIT], [/* Define to 1 if you have the `getrlimit\' function. */
-#undef HAVE_GETRLIMIT])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_GETRUSAGE], [/* Define to 1 if you have the `getrusage\' function. */
-#undef HAVE_GETRUSAGE])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_GETTTYENT], [/* Define to 1 if you have the `getttyent\' function. */
-#undef HAVE_GETTTYENT])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_GLOB], [/* Define to 1 if you have the `glob\' function. */
-#undef HAVE_GLOB])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_INET_ATON], [/* Define to 1 if you have the `inet_aton\' function. */
-#undef HAVE_INET_ATON])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_INET_NTOA], [/* Define to 1 if you have the `inet_ntoa\' function. */
-#undef HAVE_INET_NTOA])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_INET_NTOP], [/* Define to 1 if you have the `inet_ntop\' function. */
-#undef HAVE_INET_NTOP])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_INNETGR], [/* Define to 1 if you have the `innetgr\' function. */
-#undef HAVE_INNETGR])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_LOGIN_GETCAPBOOL], [/* Define to 1 if you have the `login_getcapbool\' function. */
-#undef HAVE_LOGIN_GETCAPBOOL])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_MD5_CRYPT], [/* Define to 1 if you have the `md5_crypt\' function. */
-#undef HAVE_MD5_CRYPT])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_MEMMOVE], [/* Define to 1 if you have the `memmove\' function. */
-#undef HAVE_MEMMOVE])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_MKDTEMP], [/* Define to 1 if you have the `mkdtemp\' function. */
-#undef HAVE_MKDTEMP])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_MMAP], [/* Define to 1 if you have the `mmap\' function. */
-#undef HAVE_MMAP])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_NGETADDRINFO], [/* Define to 1 if you have the `ngetaddrinfo\' function. */
-#undef HAVE_NGETADDRINFO])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_NSLEEP], [/* Define to 1 if you have the `nsleep\' function. */
-#undef HAVE_NSLEEP])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_OGETADDRINFO], [/* Define to 1 if you have the `ogetaddrinfo\' function. */
-#undef HAVE_OGETADDRINFO])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_OPENPTY], [/* Define to 1 if you have the `openpty\' function. */
-#undef HAVE_OPENPTY])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_PSTAT], [/* Define to 1 if you have the `pstat\' function. */
-#undef HAVE_PSTAT])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_READPASSPHRASE], [/* Define to 1 if you have the `readpassphrase\' function. */
-#undef HAVE_READPASSPHRASE])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_REALPATH], [/* Define to 1 if you have the `realpath\' function. */
-#undef HAVE_REALPATH])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_RECVMSG], [/* Define to 1 if you have the `recvmsg\' function. */
-#undef HAVE_RECVMSG])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_RRESVPORT_AF], [/* Define to 1 if you have the `rresvport_af\' function. */
-#undef HAVE_RRESVPORT_AF])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SENDMSG], [/* Define to 1 if you have the `sendmsg\' function. */
-#undef HAVE_SENDMSG])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SETDTABLESIZE], [/* Define to 1 if you have the `setdtablesize\' function. */
-#undef HAVE_SETDTABLESIZE])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SETEGID], [/* Define to 1 if you have the `setegid\' function. */
-#undef HAVE_SETEGID])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SETENV], [/* Define to 1 if you have the `setenv\' function. */
-#undef HAVE_SETENV])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SETEUID], [/* Define to 1 if you have the `seteuid\' function. */
-#undef HAVE_SETEUID])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SETGROUPS], [/* Define to 1 if you have the `setgroups\' function. */
-#undef HAVE_SETGROUPS])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SETLOGIN], [/* Define to 1 if you have the `setlogin\' function. */
-#undef HAVE_SETLOGIN])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SETPCRED], [/* Define to 1 if you have the `setpcred\' function. */
-#undef HAVE_SETPCRED])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SETPROCTITLE], [/* Define to 1 if you have the `setproctitle\' function. */
-#undef HAVE_SETPROCTITLE])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SETRESGID], [/* Define to 1 if you have the `setresgid\' function. */
-#undef HAVE_SETRESGID])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SETREUID], [/* Define to 1 if you have the `setreuid\' function. */
-#undef HAVE_SETREUID])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SETRLIMIT], [/* Define to 1 if you have the `setrlimit\' function. */
-#undef HAVE_SETRLIMIT])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SETSID], [/* Define to 1 if you have the `setsid\' function. */
-#undef HAVE_SETSID])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SETVBUF], [/* Define to 1 if you have the `setvbuf\' function. */
-#undef HAVE_SETVBUF])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SIGACTION], [/* Define to 1 if you have the `sigaction\' function. */
-#undef HAVE_SIGACTION])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SIGVEC], [/* Define to 1 if you have the `sigvec\' function. */
-#undef HAVE_SIGVEC])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SNPRINTF], [/* Define to 1 if you have the `snprintf\' function. */
-#undef HAVE_SNPRINTF])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SOCKETPAIR], [/* Define to 1 if you have the `socketpair\' function. */
-#undef HAVE_SOCKETPAIR])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_STRERROR], [/* Define to 1 if you have the `strerror\' function. */
-#undef HAVE_STRERROR])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_STRLCAT], [/* Define to 1 if you have the `strlcat\' function. */
-#undef HAVE_STRLCAT])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_STRLCPY], [/* Define to 1 if you have the `strlcpy\' function. */
-#undef HAVE_STRLCPY])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_STRMODE], [/* Define to 1 if you have the `strmode\' function. */
-#undef HAVE_STRMODE])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_STRNVIS], [/* Define to 1 if you have the `strnvis\' function. */
-#undef HAVE_STRNVIS])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_SYSCONF], [/* Define to 1 if you have the `sysconf\' function. */
-#undef HAVE_SYSCONF])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_TCGETPGRP], [/* Define to 1 if you have the `tcgetpgrp\' function. */
-#undef HAVE_TCGETPGRP])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_TRUNCATE], [/* Define to 1 if you have the `truncate\' function. */
-#undef HAVE_TRUNCATE])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_UTIMES], [/* Define to 1 if you have the `utimes\' function. */
-#undef HAVE_UTIMES])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_VHANGUP], [/* Define to 1 if you have the `vhangup\' function. */
-#undef HAVE_VHANGUP])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_VSNPRINTF], [/* Define to 1 if you have the `vsnprintf\' function. */
-#undef HAVE_VSNPRINTF])
-m4trace:configure.ac:622: -1- AH_OUTPUT([HAVE_WAITPID], [/* Define to 1 if you have the `waitpid\' function. */
-#undef HAVE_WAITPID])
-m4trace:configure.ac:624: -2- AC_DEFINE_TRACE_LITERAL([HAVE_NANOSLEEP])
-m4trace:configure.ac:625: -2- AC_DEFINE_TRACE_LITERAL([HAVE_BASENAME])
-m4trace:configure.ac:628: -1- AC_CHECK_FUNCS([strsep])
-m4trace:configure.ac:628: -1- AH_OUTPUT([HAVE_STRSEP], [/* Define to 1 if you have the `strsep\' function. */
-#undef HAVE_STRSEP])
-m4trace:configure.ac:665: -1- AC_CHECK_FUNCS([dirname], [AC_CHECK_HEADERS(libgen.h) ], [
-        AC_CHECK_LIB(gen, dirname,[
-                AC_CACHE_CHECK([for broken dirname],
-                        ac_cv_have_broken_dirname, [
-                        save_LIBS="$LIBS"
-                        LIBS="$LIBS -lgen"
-                        AC_TRY_RUN(
-                                [
-#include <libgen.h>
-#include <string.h>
-
-int main(int argc, char **argv) {
-    char *s, buf[32];
-
-    strncpy(buf,"/etc", 32);
-    s = dirname(buf);
-    if (!s || strncmp(s, "/", 32) != 0) {
-        exit(1);
-    } else {
-        exit(0);
-    }
-}
-                                ],
-                                [ ac_cv_have_broken_dirname="no" ],
-                                [ ac_cv_have_broken_dirname="yes" ]
-                        )
-                        LIBS="$save_LIBS"
-                ])
-                if test "x$ac_cv_have_broken_dirname" = "xno" ; then
-                        LIBS="$LIBS -lgen"
-                        AC_DEFINE(HAVE_DIRNAME)
-                        AC_CHECK_HEADERS(libgen.h)
-                fi
-        ])
-])
-m4trace:configure.ac:665: -1- AH_OUTPUT([HAVE_DIRNAME], [/* Define to 1 if you have the `dirname\' function. */
-#undef HAVE_DIRNAME])
-m4trace:configure.ac:665: -1- AC_CHECK_HEADERS([libgen.h])
-m4trace:configure.ac:665: -1- AH_OUTPUT([HAVE_LIBGEN_H], [/* Define to 1 if you have the <libgen.h> header file. */
-#undef HAVE_LIBGEN_H])
-m4trace:configure.ac:665: -1- AC_CHECK_LIB([gen], [dirname], [
-                AC_CACHE_CHECK([for broken dirname],
-                        ac_cv_have_broken_dirname, [
-                        save_LIBS="$LIBS"
-                        LIBS="$LIBS -lgen"
-                        AC_TRY_RUN(
-                                [
-#include <libgen.h>
-#include <string.h>
-
-int main(int argc, char **argv) {
-    char *s, buf[32];
-
-    strncpy(buf,"/etc", 32);
-    s = dirname(buf);
-    if (!s || strncmp(s, "/", 32) != 0) {
-        exit(1);
-    } else {
-        exit(0);
-    }
-}
-                                ],
-                                [ ac_cv_have_broken_dirname="no" ],
-                                [ ac_cv_have_broken_dirname="yes" ]
-                        )
-                        LIBS="$save_LIBS"
-                ])
-                if test "x$ac_cv_have_broken_dirname" = "xno" ; then
-                        LIBS="$LIBS -lgen"
-                        AC_DEFINE(HAVE_DIRNAME)
-                        AC_CHECK_HEADERS(libgen.h)
-                fi
-        ])
-m4trace:configure.ac:665: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DIRNAME])
-m4trace:configure.ac:665: -1- AC_CHECK_HEADERS([libgen.h])
-m4trace:configure.ac:665: -1- AH_OUTPUT([HAVE_LIBGEN_H], [/* Define to 1 if you have the <libgen.h> header file. */
-#undef HAVE_LIBGEN_H])
-m4trace:configure.ac:668: -1- AC_CHECK_FUNCS([gettimeofday time])
-m4trace:configure.ac:668: -1- AH_OUTPUT([HAVE_GETTIMEOFDAY], [/* Define to 1 if you have the `gettimeofday\' function. */
-#undef HAVE_GETTIMEOFDAY])
-m4trace:configure.ac:668: -1- AH_OUTPUT([HAVE_TIME], [/* Define to 1 if you have the `time\' function. */
-#undef HAVE_TIME])
-m4trace:configure.ac:670: -1- AC_CHECK_FUNCS([endutent getutent getutid getutline pututline setutent])
-m4trace:configure.ac:670: -1- AH_OUTPUT([HAVE_ENDUTENT], [/* Define to 1 if you have the `endutent\' function. */
-#undef HAVE_ENDUTENT])
-m4trace:configure.ac:670: -1- AH_OUTPUT([HAVE_GETUTENT], [/* Define to 1 if you have the `getutent\' function. */
-#undef HAVE_GETUTENT])
-m4trace:configure.ac:670: -1- AH_OUTPUT([HAVE_GETUTID], [/* Define to 1 if you have the `getutid\' function. */
-#undef HAVE_GETUTID])
-m4trace:configure.ac:670: -1- AH_OUTPUT([HAVE_GETUTLINE], [/* Define to 1 if you have the `getutline\' function. */
-#undef HAVE_GETUTLINE])
-m4trace:configure.ac:670: -1- AH_OUTPUT([HAVE_PUTUTLINE], [/* Define to 1 if you have the `pututline\' function. */
-#undef HAVE_PUTUTLINE])
-m4trace:configure.ac:670: -1- AH_OUTPUT([HAVE_SETUTENT], [/* Define to 1 if you have the `setutent\' function. */
-#undef HAVE_SETUTENT])
-m4trace:configure.ac:671: -1- AC_CHECK_FUNCS([utmpname])
-m4trace:configure.ac:671: -1- AH_OUTPUT([HAVE_UTMPNAME], [/* Define to 1 if you have the `utmpname\' function. */
-#undef HAVE_UTMPNAME])
-m4trace:configure.ac:673: -1- AC_CHECK_FUNCS([endutxent getutxent getutxid getutxline pututxline ])
-m4trace:configure.ac:673: -1- AH_OUTPUT([HAVE_ENDUTXENT], [/* Define to 1 if you have the `endutxent\' function. */
-#undef HAVE_ENDUTXENT])
-m4trace:configure.ac:673: -1- AH_OUTPUT([HAVE_GETUTXENT], [/* Define to 1 if you have the `getutxent\' function. */
-#undef HAVE_GETUTXENT])
-m4trace:configure.ac:673: -1- AH_OUTPUT([HAVE_GETUTXID], [/* Define to 1 if you have the `getutxid\' function. */
-#undef HAVE_GETUTXID])
-m4trace:configure.ac:673: -1- AH_OUTPUT([HAVE_GETUTXLINE], [/* Define to 1 if you have the `getutxline\' function. */
-#undef HAVE_GETUTXLINE])
-m4trace:configure.ac:673: -1- AH_OUTPUT([HAVE_PUTUTXLINE], [/* Define to 1 if you have the `pututxline\' function. */
-#undef HAVE_PUTUTXLINE])
-m4trace:configure.ac:674: -1- AC_CHECK_FUNCS([setutxent utmpxname])
-m4trace:configure.ac:674: -1- AH_OUTPUT([HAVE_SETUTXENT], [/* Define to 1 if you have the `setutxent\' function. */
-#undef HAVE_SETUTXENT])
-m4trace:configure.ac:674: -1- AH_OUTPUT([HAVE_UTMPXNAME], [/* Define to 1 if you have the `utmpxname\' function. */
-#undef HAVE_UTMPXNAME])
-m4trace:configure.ac:679: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DAEMON])
-m4trace:configure.ac:679: -1- AC_CHECK_LIB([bsd], [daemon], [LIBS="$LIBS -lbsd"; AC_DEFINE(HAVE_DAEMON)])
-m4trace:configure.ac:679: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DAEMON])
-m4trace:configure.ac:684: -1- AC_DEFINE_TRACE_LITERAL([HAVE_GETPAGESIZE])
-m4trace:configure.ac:684: -1- AC_CHECK_LIB([ucb], [getpagesize], [LIBS="$LIBS -lucb"; AC_DEFINE(HAVE_GETPAGESIZE)])
-m4trace:configure.ac:684: -1- AC_DEFINE_TRACE_LITERAL([HAVE_GETPAGESIZE])
-m4trace:configure.ac:700: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_SNPRINTF])
-m4trace:configure.ac:726: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRICT_MKSTEMP])
-m4trace:configure.ac:726: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRICT_MKSTEMP])
-m4trace:configure.ac:729: -1- AC_FUNC_GETPGRP
-m4trace:configure.ac:729: -1- AC_DEFINE_TRACE_LITERAL([GETPGRP_VOID])
-m4trace:configure.ac:729: -1- AH_OUTPUT([GETPGRP_VOID], [/* Define to 1 if the `getpgrp\' function requires zero arguments. */
-#undef GETPGRP_VOID])
-m4trace:configure.ac:757: -1- AC_CHECK_LIB([dl], [dlopen], [], [])
-m4trace:configure.ac:757: -1- AH_OUTPUT([HAVE_LIBDL], [/* Define to 1 if you have the `dl\' library (-ldl). */
-#undef HAVE_LIBDL])
-m4trace:configure.ac:757: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBDL])
-m4trace:configure.ac:757: -1- AC_CHECK_LIB([pam], [pam_set_item], [], [{ { echo "$as_me:$LINENO: error: *** libpam missing" >&5
-echo "$as_me: error: *** libpam missing" >&2;}
-   { (exit 1); exit 1; }; }])
-m4trace:configure.ac:757: -1- AH_OUTPUT([HAVE_LIBPAM], [/* Define to 1 if you have the `pam\' library (-lpam). */
-#undef HAVE_LIBPAM])
-m4trace:configure.ac:757: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBPAM])
-m4trace:configure.ac:757: -1- AC_CHECK_FUNCS([pam_getenvlist])
-m4trace:configure.ac:757: -1- AH_OUTPUT([HAVE_PAM_GETENVLIST], [/* Define to 1 if you have the `pam_getenvlist\' function. */
-#undef HAVE_PAM_GETENVLIST])
-m4trace:configure.ac:757: -1- AC_DEFINE_TRACE_LITERAL([USE_PAM])
-m4trace:configure.ac:757: -1- AC_SUBST([LIBPAM])
-m4trace:configure.ac:775: -1- AC_DEFINE_TRACE_LITERAL([HAVE_OLD_PAM])
-m4trace:configure.ac:781: -1- AC_CHECK_LIB([crypt], [crypt])
-m4trace:configure.ac:781: -1- AH_OUTPUT([HAVE_LIBCRYPT], [/* Define to 1 if you have the `crypt\' library (-lcrypt). */
-#undef HAVE_LIBCRYPT])
-m4trace:configure.ac:781: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBCRYPT])
-m4trace:configure.ac:813: -2- AC_DEFINE_TRACE_LITERAL([HAVE_OPENSSL])
-m4trace:configure.ac:828: -2- AC_DEFINE_TRACE_LITERAL([HAVE_OPENSSL])
-m4trace:configure.ac:915: -1- AC_CHECK_LIB([crypt], [crypt], [LIBS="$LIBS -lcrypt"])
-m4trace:configure.ac:963: -1- AC_DEFINE_TRACE_LITERAL([OPENSSL_PRNG_ONLY])
-m4trace:configure.ac:971: -1- AC_SUBST([INSTALL_SSH_RAND_HELPER])
-m4trace:configure.ac:994: -1- AC_DEFINE_TRACE_LITERAL([PRNGD_PORT])
-m4trace:configure.ac:1044: -1- AC_DEFINE_TRACE_LITERAL([PRNGD_SOCKET])
-m4trace:configure.ac:1044: -1- AC_DEFINE_TRACE_LITERAL([PRNGD_SOCKET])
-m4trace:configure.ac:1056: -1- AC_DEFINE_TRACE_LITERAL([ENTROPY_TIMEOUT_MSEC])
-m4trace:configure.ac:1067: -1- AC_DEFINE_TRACE_LITERAL([SSH_PRIVSEP_USER])
-m4trace:configure.ac:1068: -1- AC_SUBST([SSH_PRIVSEP_USER])
-m4trace:configure.ac:1085: -1- AC_SUBST([PROG_LS], [$ac_cv_path_PROG_LS])
-m4trace:configure.ac:1085: -1- AC_SUBST([PROG_LS])
-m4trace:configure.ac:1086: -1- AC_SUBST([PROG_NETSTAT], [$ac_cv_path_PROG_NETSTAT])
-m4trace:configure.ac:1086: -1- AC_SUBST([PROG_NETSTAT])
-m4trace:configure.ac:1087: -1- AC_SUBST([PROG_ARP], [$ac_cv_path_PROG_ARP])
-m4trace:configure.ac:1087: -1- AC_SUBST([PROG_ARP])
-m4trace:configure.ac:1088: -1- AC_SUBST([PROG_IFCONFIG], [$ac_cv_path_PROG_IFCONFIG])
-m4trace:configure.ac:1088: -1- AC_SUBST([PROG_IFCONFIG])
-m4trace:configure.ac:1089: -1- AC_SUBST([PROG_JSTAT], [$ac_cv_path_PROG_JSTAT])
-m4trace:configure.ac:1089: -1- AC_SUBST([PROG_JSTAT])
-m4trace:configure.ac:1090: -1- AC_SUBST([PROG_PS], [$ac_cv_path_PROG_PS])
-m4trace:configure.ac:1090: -1- AC_SUBST([PROG_PS])
-m4trace:configure.ac:1091: -1- AC_SUBST([PROG_SAR], [$ac_cv_path_PROG_SAR])
-m4trace:configure.ac:1091: -1- AC_SUBST([PROG_SAR])
-m4trace:configure.ac:1092: -1- AC_SUBST([PROG_W], [$ac_cv_path_PROG_W])
-m4trace:configure.ac:1092: -1- AC_SUBST([PROG_W])
-m4trace:configure.ac:1093: -1- AC_SUBST([PROG_WHO], [$ac_cv_path_PROG_WHO])
-m4trace:configure.ac:1093: -1- AC_SUBST([PROG_WHO])
-m4trace:configure.ac:1094: -1- AC_SUBST([PROG_LAST], [$ac_cv_path_PROG_LAST])
-m4trace:configure.ac:1094: -1- AC_SUBST([PROG_LAST])
-m4trace:configure.ac:1095: -1- AC_SUBST([PROG_LASTLOG], [$ac_cv_path_PROG_LASTLOG])
-m4trace:configure.ac:1095: -1- AC_SUBST([PROG_LASTLOG])
-m4trace:configure.ac:1096: -1- AC_SUBST([PROG_DF], [$ac_cv_path_PROG_DF])
-m4trace:configure.ac:1096: -1- AC_SUBST([PROG_DF])
-m4trace:configure.ac:1097: -1- AC_SUBST([PROG_VMSTAT], [$ac_cv_path_PROG_VMSTAT])
-m4trace:configure.ac:1097: -1- AC_SUBST([PROG_VMSTAT])
-m4trace:configure.ac:1098: -1- AC_SUBST([PROG_UPTIME], [$ac_cv_path_PROG_UPTIME])
-m4trace:configure.ac:1098: -1- AC_SUBST([PROG_UPTIME])
-m4trace:configure.ac:1099: -1- AC_SUBST([PROG_IPCS], [$ac_cv_path_PROG_IPCS])
-m4trace:configure.ac:1099: -1- AC_SUBST([PROG_IPCS])
-m4trace:configure.ac:1100: -1- AC_SUBST([PROG_TAIL], [$ac_cv_path_PROG_TAIL])
-m4trace:configure.ac:1100: -1- AC_SUBST([PROG_TAIL])
-m4trace:configure.ac:1117: -1- AC_SUBST([INSTALL_SSH_PRNG_CMDS])
-m4trace:configure.ac:1126: -1- AC_DEFINE_TRACE_LITERAL([SIZEOF_CHAR])
-m4trace:configure.ac:1126: -1- AH_OUTPUT([SIZEOF_CHAR], [/* The size of a `char\', as computed by sizeof. */
-#undef SIZEOF_CHAR])
-m4trace:configure.ac:1127: -1- AC_DEFINE_TRACE_LITERAL([SIZEOF_SHORT_INT])
-m4trace:configure.ac:1127: -1- AH_OUTPUT([SIZEOF_SHORT_INT], [/* The size of a `short int\', as computed by sizeof. */
-#undef SIZEOF_SHORT_INT])
-m4trace:configure.ac:1128: -1- AC_DEFINE_TRACE_LITERAL([SIZEOF_INT])
-m4trace:configure.ac:1128: -1- AH_OUTPUT([SIZEOF_INT], [/* The size of a `int\', as computed by sizeof. */
-#undef SIZEOF_INT])
-m4trace:configure.ac:1129: -1- AC_DEFINE_TRACE_LITERAL([SIZEOF_LONG_INT])
-m4trace:configure.ac:1129: -1- AH_OUTPUT([SIZEOF_LONG_INT], [/* The size of a `long int\', as computed by sizeof. */
-#undef SIZEOF_LONG_INT])
-m4trace:configure.ac:1130: -1- AC_DEFINE_TRACE_LITERAL([SIZEOF_LONG_LONG_INT])
-m4trace:configure.ac:1130: -1- AH_OUTPUT([SIZEOF_LONG_LONG_INT], [/* The size of a `long long int\', as computed by sizeof. */
-#undef SIZEOF_LONG_LONG_INT])
-m4trace:configure.ac:1147: -1- AC_DEFINE_TRACE_LITERAL([HAVE_U_INT])
-m4trace:configure.ac:1160: -1- AC_DEFINE_TRACE_LITERAL([HAVE_INTXX_T])
-m4trace:configure.ac:1176: -1- AC_DEFINE_TRACE_LITERAL([HAVE_INTXX_T])
-m4trace:configure.ac:1197: -1- AC_DEFINE_TRACE_LITERAL([HAVE_INT64_T])
-m4trace:configure.ac:1209: -1- AC_DEFINE_TRACE_LITERAL([HAVE_U_INTXX_T])
-m4trace:configure.ac:1223: -1- AC_DEFINE_TRACE_LITERAL([HAVE_U_INTXX_T])
-m4trace:configure.ac:1235: -1- AC_DEFINE_TRACE_LITERAL([HAVE_U_INT64_T])
-m4trace:configure.ac:1249: -1- AC_DEFINE_TRACE_LITERAL([HAVE_U_INT64_T])
-m4trace:configure.ac:1264: -1- AC_DEFINE_TRACE_LITERAL([HAVE_UINTXX_T])
-m4trace:configure.ac:1278: -1- AC_DEFINE_TRACE_LITERAL([HAVE_UINTXX_T])
-m4trace:configure.ac:1300: -1- AC_DEFINE_TRACE_LITERAL([HAVE_U_INTXX_T])
-m4trace:configure.ac:1300: -1- AC_DEFINE_TRACE_LITERAL([HAVE_INTXX_T])
-m4trace:configure.ac:1315: -1- AC_DEFINE_TRACE_LITERAL([HAVE_U_CHAR])
-m4trace:configure.ac:1318: -1- AC_DEFINE_TRACE_LITERAL([socklen_t])
-m4trace:configure.ac:1318: -1- AH_OUTPUT([socklen_t], [/* type to use in place of socklen_t if not defined */
-#undef socklen_t])
-m4trace:configure.ac:1320: -1- AC_CHECK_TYPES([sig_atomic_t], [], [], [#include <signal.h>])
-m4trace:configure.ac:1320: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SIG_ATOMIC_T])
-m4trace:configure.ac:1320: -1- AH_OUTPUT([HAVE_SIG_ATOMIC_T], [/* Define to 1 if the system has the type `sig_atomic_t\'. */
-#undef HAVE_SIG_ATOMIC_T])
-m4trace:configure.ac:1333: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SIZE_T])
-m4trace:configure.ac:1347: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SSIZE_T])
-m4trace:configure.ac:1361: -1- AC_DEFINE_TRACE_LITERAL([HAVE_CLOCK_T])
-m4trace:configure.ac:1386: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SA_FAMILY_T])
-m4trace:configure.ac:1400: -1- AC_DEFINE_TRACE_LITERAL([HAVE_PID_T])
-m4trace:configure.ac:1414: -1- AC_DEFINE_TRACE_LITERAL([HAVE_MODE_T])
-m4trace:configure.ac:1430: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_SOCKADDR_STORAGE])
-m4trace:configure.ac:1445: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_SOCKADDR_IN6])
-m4trace:configure.ac:1460: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_IN6_ADDR])
-m4trace:configure.ac:1476: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_ADDRINFO])
-m4trace:configure.ac:1488: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_TIMEVAL])
-m4trace:configure.ac:1492: -1- AC_CHECK_TYPES([struct timespec])
-m4trace:configure.ac:1492: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_TIMESPEC])
-m4trace:configure.ac:1492: -1- AH_OUTPUT([HAVE_STRUCT_TIMESPEC], [/* Define to 1 if the system has the type `struct timespec\'. */
-#undef HAVE_STRUCT_TIMESPEC])
-m4trace:configure.ac:1529: -1- AC_DEFINE_TRACE_LITERAL([BROKEN_SNPRINTF])
-m4trace:configure.ac:1533: -1- AC_DEFINE_TRACE_LITERAL([HAVE_HOST_IN_UTMP])
-m4trace:configure.ac:1534: -1- AC_DEFINE_TRACE_LITERAL([HAVE_HOST_IN_UTMPX])
-m4trace:configure.ac:1535: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SYSLEN_IN_UTMPX])
-m4trace:configure.ac:1536: -1- AC_DEFINE_TRACE_LITERAL([HAVE_PID_IN_UTMP])
-m4trace:configure.ac:1537: -1- AC_DEFINE_TRACE_LITERAL([HAVE_TYPE_IN_UTMP])
-m4trace:configure.ac:1538: -1- AC_DEFINE_TRACE_LITERAL([HAVE_TYPE_IN_UTMPX])
-m4trace:configure.ac:1539: -1- AC_DEFINE_TRACE_LITERAL([HAVE_TV_IN_UTMP])
-m4trace:configure.ac:1540: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ID_IN_UTMP])
-m4trace:configure.ac:1541: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ID_IN_UTMPX])
-m4trace:configure.ac:1542: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ADDR_IN_UTMP])
-m4trace:configure.ac:1543: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ADDR_IN_UTMPX])
-m4trace:configure.ac:1544: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ADDR_V6_IN_UTMP])
-m4trace:configure.ac:1545: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ADDR_V6_IN_UTMPX])
-m4trace:configure.ac:1546: -1- AC_DEFINE_TRACE_LITERAL([HAVE_EXIT_IN_UTMP])
-m4trace:configure.ac:1547: -1- AC_DEFINE_TRACE_LITERAL([HAVE_TIME_IN_UTMP])
-m4trace:configure.ac:1548: -1- AC_DEFINE_TRACE_LITERAL([HAVE_TIME_IN_UTMPX])
-m4trace:configure.ac:1549: -1- AC_DEFINE_TRACE_LITERAL([HAVE_TV_IN_UTMPX])
-m4trace:configure.ac:1551: -1- AC_CHECK_MEMBERS([struct stat.st_blksize])
-m4trace:configure.ac:1551: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_STAT_ST_BLKSIZE])
-m4trace:configure.ac:1551: -1- AH_OUTPUT([HAVE_STRUCT_STAT_ST_BLKSIZE], [/* Define to 1 if `st_blksize\' is member of `struct stat\'. */
-#undef HAVE_STRUCT_STAT_ST_BLKSIZE])
-m4trace:configure.ac:1566: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SS_FAMILY_IN_SS])
-m4trace:configure.ac:1582: -1- AC_DEFINE_TRACE_LITERAL([HAVE___SS_FAMILY_IN_SS])
-m4trace:configure.ac:1597: -1- AC_DEFINE_TRACE_LITERAL([HAVE_PW_CLASS_IN_PASSWD])
-m4trace:configure.ac:1612: -1- AC_DEFINE_TRACE_LITERAL([HAVE_PW_EXPIRE_IN_PASSWD])
-m4trace:configure.ac:1627: -1- AC_DEFINE_TRACE_LITERAL([HAVE_PW_CHANGE_IN_PASSWD])
-m4trace:configure.ac:1652: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ACCRIGHTS_IN_MSGHDR])
-m4trace:configure.ac:1676: -1- AC_DEFINE_TRACE_LITERAL([HAVE_CONTROL_IN_MSGHDR])
-m4trace:configure.ac:1687: -1- AC_DEFINE_TRACE_LITERAL([HAVE___PROGNAME])
-m4trace:configure.ac:1700: -1- AC_DEFINE_TRACE_LITERAL([HAVE___FUNCTION__])
-m4trace:configure.ac:1713: -1- AC_DEFINE_TRACE_LITERAL([HAVE___func__])
-m4trace:configure.ac:1728: -1- AC_DEFINE_TRACE_LITERAL([HAVE_GETOPT_OPTRESET])
-m4trace:configure.ac:1739: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SYS_ERRLIST])
-m4trace:configure.ac:1751: -1- AC_DEFINE_TRACE_LITERAL([HAVE_SYS_NERR])
-m4trace:configure.ac:1784: -1- AC_CHECK_HEADERS([sectok.h])
-m4trace:configure.ac:1784: -1- AH_OUTPUT([HAVE_SECTOK_H], [/* Define to 1 if you have the <sectok.h> header file. */
-#undef HAVE_SECTOK_H])
-m4trace:configure.ac:1784: -1- AC_CHECK_LIB([sectok], [sectok_open])
-m4trace:configure.ac:1784: -1- AH_OUTPUT([HAVE_LIBSECTOK], [/* Define to 1 if you have the `sectok\' library (-lsectok). */
-#undef HAVE_LIBSECTOK])
-m4trace:configure.ac:1784: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBSECTOK])
-m4trace:configure.ac:1784: -1- AC_DEFINE_TRACE_LITERAL([SMARTCARD])
-m4trace:configure.ac:1784: -1- AC_DEFINE_TRACE_LITERAL([USE_SECTOK])
-m4trace:configure.ac:1793: -1- AC_SUBST([OPENSC_CONFIG], [$ac_cv_path_OPENSC_CONFIG])
-m4trace:configure.ac:1799: -1- AC_DEFINE_TRACE_LITERAL([SMARTCARD])
-m4trace:configure.ac:1800: -1- AC_DEFINE_TRACE_LITERAL([USE_OPENSC])
-m4trace:configure.ac:1842: -1- AC_DEFINE_TRACE_LITERAL([KRB5])
-m4trace:configure.ac:1842: -1- AC_DEFINE_TRACE_LITERAL([HEIMDAL])
-m4trace:configure.ac:1842: -1- AC_CHECK_LIB([resolv], [dn_expand], [], [])
-m4trace:configure.ac:1842: -1- AH_OUTPUT([HAVE_LIBRESOLV], [/* Define to 1 if you have the `resolv\' library (-lresolv). */
-#undef HAVE_LIBRESOLV])
-m4trace:configure.ac:1842: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBRESOLV])
-m4trace:configure.ac:1896: -1- AC_CHECK_HEADERS([krb.h])
-m4trace:configure.ac:1896: -1- AH_OUTPUT([HAVE_KRB_H], [/* Define to 1 if you have the <krb.h> header file. */
-#undef HAVE_KRB_H])
-m4trace:configure.ac:1896: -1- AC_CHECK_LIB([krb], [main])
-m4trace:configure.ac:1896: -1- AH_OUTPUT([HAVE_LIBKRB], [/* Define to 1 if you have the `krb\' library (-lkrb). */
-#undef HAVE_LIBKRB])
-m4trace:configure.ac:1896: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBKRB])
-m4trace:configure.ac:1896: -1- AC_CHECK_LIB([krb4], [main])
-m4trace:configure.ac:1896: -1- AH_OUTPUT([HAVE_LIBKRB4], [/* Define to 1 if you have the `krb4\' library (-lkrb4). */
-#undef HAVE_LIBKRB4])
-m4trace:configure.ac:1896: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBKRB4])
-m4trace:configure.ac:1896: -1- AC_CHECK_LIB([des], [des_cbc_encrypt])
-m4trace:configure.ac:1896: -1- AH_OUTPUT([HAVE_LIBDES], [/* Define to 1 if you have the `des\' library (-ldes). */
-#undef HAVE_LIBDES])
-m4trace:configure.ac:1896: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBDES])
-m4trace:configure.ac:1896: -1- AC_CHECK_LIB([des425], [des_cbc_encrypt])
-m4trace:configure.ac:1896: -1- AH_OUTPUT([HAVE_LIBDES425], [/* Define to 1 if you have the `des425\' library (-ldes425). */
-#undef HAVE_LIBDES425])
-m4trace:configure.ac:1896: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBDES425])
-m4trace:configure.ac:1896: -1- AC_CHECK_LIB([resolv], [dn_expand], [], [])
-m4trace:configure.ac:1896: -1- AH_OUTPUT([HAVE_LIBRESOLV], [/* Define to 1 if you have the `resolv\' library (-lresolv). */
-#undef HAVE_LIBRESOLV])
-m4trace:configure.ac:1896: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBRESOLV])
-m4trace:configure.ac:1896: -1- AC_DEFINE_TRACE_LITERAL([KRB4])
-m4trace:configure.ac:1922: -1- AC_DEFINE_TRACE_LITERAL([AFS])
-m4trace:configure.ac:1936: -1- AC_SUBST([PRIVSEP_PATH])
-m4trace:configure.ac:1956: -1- AC_SUBST([xauth_path], [$ac_cv_path_xauth_path])
-m4trace:configure.ac:1967: -1- AC_SUBST([STRIP_OPT])
-m4trace:configure.ac:1971: -1- AC_SUBST([XAUTH_PATH])
-m4trace:configure.ac:1973: -1- AC_DEFINE_TRACE_LITERAL([XAUTH_PATH])
-m4trace:configure.ac:1975: -1- AC_SUBST([XAUTH_PATH])
-m4trace:configure.ac:1981: -1- AC_DEFINE_TRACE_LITERAL([MAIL_DIRECTORY])
-m4trace:configure.ac:1991: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DEV_PTMX])
-m4trace:configure.ac:1999: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DEV_PTS_AND_PTC])
-m4trace:configure.ac:2017: -1- AC_SUBST([NROFF], [$ac_cv_path_NROFF])
-m4trace:configure.ac:2026: -1- AC_SUBST([MANTYPE])
-m4trace:configure.ac:2032: -1- AC_SUBST([mansubdir])
-m4trace:configure.ac:2044: -1- AC_DEFINE_TRACE_LITERAL([HAVE_MD5_PASSWORDS])
-m4trace:configure.ac:2055: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_SHADOW])
-m4trace:configure.ac:2070: -1- AC_DEFINE_TRACE_LITERAL([HAS_SHADOW_EXPIRE])
-m4trace:configure.ac:2079: -1- AC_DEFINE_TRACE_LITERAL([IPADDR_IN_DISPLAY])
-m4trace:configure.ac:2090: -1- AC_DEFINE_TRACE_LITERAL([IPADDR_IN_DISPLAY])
-m4trace:configure.ac:2171: -1- AC_DEFINE_TRACE_LITERAL([USER_PATH])
-m4trace:configure.ac:2172: -1- AC_SUBST([user_path])
-m4trace:configure.ac:2184: -1- AC_DEFINE_TRACE_LITERAL([SUPERUSER_PATH])
-m4trace:configure.ac:2197: -1- AC_DEFINE_TRACE_LITERAL([IPV4_DEFAULT])
-m4trace:configure.ac:2220: -1- AC_DEFINE_TRACE_LITERAL([IPV4_IN_IPV6])
-m4trace:configure.ac:2220: -1- AC_DEFINE_TRACE_LITERAL([IPV4_IN_IPV6])
-m4trace:configure.ac:2232: -1- AC_DEFINE_TRACE_LITERAL([BSD_AUTH])
-m4trace:configure.ac:2256: -1- AC_DEFINE_TRACE_LITERAL([_PATH_SSH_PIDDIR])
-m4trace:configure.ac:2257: -1- AC_SUBST([piddir])
-m4trace:configure.ac:2263: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_LASTLOG])
-m4trace:configure.ac:2267: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMP])
-m4trace:configure.ac:2271: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMPX])
-m4trace:configure.ac:2275: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_WTMP])
-m4trace:configure.ac:2279: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_WTMPX])
-m4trace:configure.ac:2283: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_LOGIN])
-m4trace:configure.ac:2287: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_PUTUTLINE])
-m4trace:configure.ac:2291: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_PUTUTXLINE])
-m4trace:configure.ac:2301: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_LASTLOG])
-m4trace:configure.ac:2363: -1- AC_DEFINE_TRACE_LITERAL([CONF_LASTLOG_FILE])
-m4trace:configure.ac:2388: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMP])
-m4trace:configure.ac:2393: -1- AC_DEFINE_TRACE_LITERAL([CONF_UTMP_FILE])
-m4trace:configure.ac:2418: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_WTMP])
-m4trace:configure.ac:2423: -1- AC_DEFINE_TRACE_LITERAL([CONF_WTMP_FILE])
-m4trace:configure.ac:2448: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_UTMPX])
-m4trace:configure.ac:2451: -1- AC_DEFINE_TRACE_LITERAL([CONF_UTMPX_FILE])
-m4trace:configure.ac:2473: -1- AC_DEFINE_TRACE_LITERAL([DISABLE_WTMPX])
-m4trace:configure.ac:2476: -1- AC_DEFINE_TRACE_LITERAL([CONF_WTMPX_FILE])
-m4trace:configure.ac:2494: -1- AC_CONFIG_FILES([Makefile openbsd-compat/Makefile scard/Makefile ssh_prng_cmds])
-m4trace:configure.ac:2495: -1- AC_SUBST([LIB@&t@OBJS], [$ac_libobjs])
-m4trace:configure.ac:2495: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs])
diff --git a/cipher-bf1.c b/cipher-bf1.c
index 5af695c17..64578bae8 100644
--- a/cipher-bf1.c
+++ b/cipher-bf1.c
@@ -28,11 +28,6 @@ RCSID("$OpenBSD: cipher-bf1.c,v 1.1 2003/05/15 03:08:29 markus Exp $");
 #include <openssl/evp.h>
 #include "xmalloc.h"
 #include "log.h"
-
-#if OPENSSL_VERSION_NUMBER < 0x00906000L
-#define SSH_OLD_EVP
-#endif
-
 /*
  * SSH1 uses a variation on Blowfish, all bytes must be swapped before
  * and after encryption/decryption. Thus the swap_bytes stuff (yuk).
diff --git a/clientloop.c b/clientloop.c
index 0b9a0fb29..1bcf4392f 100644
--- a/clientloop.c
+++ b/clientloop.c
@@ -334,12 +334,17 @@ client_global_request_reply(int type, u_int32_t seq, void *ctxt)
 static void
 server_alive_check(void)
 {
-        if (++server_alive_timeouts > options.server_alive_count_max)
-                packet_disconnect("Timeout, server not responding.");
-        packet_start(SSH2_MSG_GLOBAL_REQUEST);
-        packet_put_cstring("keepalive@openssh.com");
-        packet_put_char(1);     /* boolean: want reply */
-        packet_send();
+        if (compat20) {
+                if (++server_alive_timeouts > options.server_alive_count_max)
+                        packet_disconnect("Timeout, server not responding.");
+                packet_start(SSH2_MSG_GLOBAL_REQUEST);
+                packet_put_cstring("keepalive@openssh.com");
+                packet_put_char(1);     /* boolean: want reply */
+                packet_send();
+        } else {
+                packet_send_ignore(0);
+                packet_send();
+        }
 }
 
 /*
@@ -400,7 +405,7 @@ client_wait_until_can_do_something(fd_set **readsetp, fd_set **writesetp,
          * event pending.
          */
 
-        if (options.server_alive_interval == 0 || !compat20)
+        if (options.server_alive_interval == 0)
                 tvp = NULL;
         else {
                 tv.tv_sec = options.server_alive_interval;
diff --git a/config.guess b/config.guess
index 500ee74b0..e8c6fc0c3 100755
--- a/config.guess
+++ b/config.guess
@@ -3,7 +3,7 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
 #   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
 
-timestamp='2003-10-03'
+timestamp='2004-01-05'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -221,6 +221,9 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     mvmeppc:OpenBSD:*:*)
         echo powerpc-unknown-openbsd${UNAME_RELEASE}
         exit 0 ;;
+    pegasos:OpenBSD:*:*)
+        echo powerpc-unknown-openbsd${UNAME_RELEASE}
+        exit 0 ;;
     pmax:OpenBSD:*:*)
         echo mipsel-unknown-openbsd${UNAME_RELEASE}
         exit 0 ;;
@@ -307,6 +310,9 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:OS/390:*:*)
         echo i370-ibm-openedition
         exit 0 ;;
+    *:OS400:*:*)
+        echo powerpc-ibm-os400
+        exit 0 ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
         echo arm-acorn-riscix${UNAME_RELEASE}
         exit 0;;
@@ -742,6 +748,11 @@ EOF
         FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
         echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
         exit 0 ;;
+    5000:UNIX_System_V:4.*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit 0 ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
         echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
         exit 0 ;;
@@ -751,7 +762,7 @@ EOF
     *:BSD/OS:*:*)
         echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
         exit 0 ;;
-    *:FreeBSD:*:*|*:GNU/FreeBSD:*:*)
+    *:FreeBSD:*:*)
         # Determine whether the default compiler uses glibc.
         eval $set_cc_for_build
         sed 's/^        //' << EOF >$dummy.c
@@ -763,7 +774,7 @@ EOF
         #endif
 EOF
         eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-        # GNU/FreeBSD systems have a "k" prefix to indicate we are using
+        # GNU/KFreeBSD systems have a "k" prefix to indicate we are using
         # FreeBSD's kernel, but not the complete OS.
         case ${LIBC} in gnu) kernel_only='k' ;; esac
         echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
@@ -799,8 +810,13 @@ EOF
         echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
         exit 0 ;;
     *:GNU:*:*)
+        # the GNU system
         echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
         exit 0 ;;
+    *:GNU/*:*:*)
+        # other systems with GNU libc and userland
+        echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+        exit 0 ;;
     i*86:Minix:*:*)
         echo ${UNAME_MACHINE}-pc-minix
         exit 0 ;;
@@ -981,6 +997,9 @@ EOF
     i*86:atheos:*:*)
         echo ${UNAME_MACHINE}-unknown-atheos
         exit 0 ;;
+        i*86:syllable:*:*)
+        echo ${UNAME_MACHINE}-pc-syllable
+        exit 0 ;;
     i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
         echo i386-unknown-lynxos${UNAME_RELEASE}
         exit 0 ;;
@@ -1052,7 +1071,7 @@ EOF
         exit 0 ;;
     M68*:*:R3V[567]*:*)
         test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
         OS_REL=''
         test -r /etc/.relid \
         && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
@@ -1167,7 +1186,7 @@ EOF
     *:QNX:*:4*)
         echo i386-pc-qnx
         exit 0 ;;
-    NSR-[DGKLNPTVWY]:NONSTOP_KERNEL:*:*)
+    NSR-?:NONSTOP_KERNEL:*:*)
         echo nsr-tandem-nsk${UNAME_RELEASE}
         exit 0 ;;
     *:NonStop-UX:*:*)
@@ -1211,6 +1230,9 @@ EOF
     SEI:*:*:SEIUX)
         echo mips-sei-seiux${UNAME_RELEASE}
         exit 0 ;;
+    *:DRAGONFLY:*:*)
+        echo ${UNAME_MACHINE}-unknown-dragonfly${UNAME_RELEASE}
+        exit 0 ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
diff --git a/config.sub b/config.sub
index 1f31816b9..463186dbf 100755
--- a/config.sub
+++ b/config.sub
@@ -3,7 +3,7 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
 #   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
 
-timestamp='2003-08-18'
+timestamp='2004-01-05'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -118,7 +118,8 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | kfreebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
+  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -379,6 +380,9 @@ case $basic_machine in
         amd64)
                 basic_machine=x86_64-pc
                 ;;
+        amd64-*)
+                basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+                ;;
         amdahl)
                 basic_machine=580-amdahl
                 os=-sysv
@@ -743,6 +747,10 @@ case $basic_machine in
                 basic_machine=or32-unknown
                 os=-coff
                 ;;
+        os400)
+                basic_machine=powerpc-ibm
+                os=-os400
+                ;;
         OSE68000 | ose68000)
                 basic_machine=m68000-ericsson
                 os=-ose
@@ -963,6 +971,10 @@ case $basic_machine in
         tower | tower-32)
                 basic_machine=m68k-ncr
                 ;;
+        tpf)
+                basic_machine=s390x-ibm
+                os=-tpf
+                ;;
         udi29k)
                 basic_machine=a29k-amd
                 os=-udi
@@ -1131,19 +1143,19 @@ case $os in
               | -aos* \
               | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
               | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-              | -hiux* | -386bsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \
+              | -hiux* | -386bsd* | -knetbsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \
               | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
               | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
               | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
               | -chorusos* | -chorusrdb* \
               | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-              | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+              | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
               | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
               | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
               | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
               | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
               | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-              | -powermax* | -dnix* | -nx6 | -nx7 | -sei*)
+              | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
         # Remember, each alternative MUST END IN *, to match a version number.
                 ;;
         -qnx*)
@@ -1182,6 +1194,9 @@ case $os in
         -opened*)
                 os=-openedition
                 ;;
+        -os400*)
+                os=-os400
+                ;;
         -wince*)
                 os=-wince
                 ;;
@@ -1203,6 +1218,9 @@ case $os in
         -atheos*)
                 os=-atheos
                 ;;
+        -syllable*)
+                os=-syllable
+                ;;
         -386bsd)
                 os=-bsd
                 ;;
@@ -1225,6 +1243,9 @@ case $os in
         -sinix*)
                 os=-sysv4
                 ;;
+        -tpf*)
+                os=-tpf
+                ;;
         -triton*)
                 os=-sysv3
                 ;;
@@ -1473,9 +1494,15 @@ case $basic_machine in
                         -mvs* | -opened*)
                                 vendor=ibm
                                 ;;
+                        -os400*)
+                                vendor=ibm
+                                ;;
                         -ptx*)
                                 vendor=sequent
                                 ;;
+                        -tpf*)
+                                vendor=ibm
+                                ;;
                         -vxsim* | -vxworks* | -windiss*)
                                 vendor=wrs
                                 ;;
diff --git a/contrib/.cvsignore b/contrib/.cvsignore
new file mode 100644
index 000000000..944ad9041
--- /dev/null
+++ b/contrib/.cvsignore
@@ -0,0 +1,2 @@
+gnome-ssh-askpass1
+gnome-ssh-askpass2
diff --git a/contrib/gnome-ssh-askpass.c b/contrib/gnome-ssh-askpass.c
deleted file mode 100644
index 7cece5620..000000000
--- a/contrib/gnome-ssh-askpass.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (c) 2000-2002 Damien Miller.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * This is a simple GNOME SSH passphrase grabber. To use it, set the 
- * environment variable SSH_ASKPASS to point to the location of 
- * gnome-ssh-askpass before calling "ssh-add < /dev/null". 
- *
- * There is only two run-time options: if you set the environment variable
- * "GNOME_SSH_ASKPASS_GRAB_SERVER=true" then gnome-ssh-askpass will grab
- * the X server. If you set "GNOME_SSH_ASKPASS_GRAB_POINTER=true", then the 
- * pointer will be grabbed too. These may have some benefit to security if 
- * you don't trust your X server. We grab the keyboard always.
- */
-
-/*
- * Compile with:
- *
- * cc `gnome-config --cflags gnome gnomeui` \
- *    gnome-ssh-askpass.c -o gnome-ssh-askpass \
- *    `gnome-config --libs gnome gnomeui`
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <gnome.h>
-#include <X11/Xlib.h>
-#include <gdk/gdkx.h>
-
-void
-report_failed_grab (void)
-{
-        GtkWidget *err;
-
-        err = gnome_message_box_new("Could not grab keyboard or mouse.\n"
-                "A malicious client may be eavesdropping on your session.",
-                                    GNOME_MESSAGE_BOX_ERROR, "EXIT", NULL);
-        gtk_window_set_position(GTK_WINDOW(err), GTK_WIN_POS_CENTER);
-        gtk_object_set(GTK_OBJECT(err), "type", GTK_WINDOW_POPUP, NULL);
-
-        gnome_dialog_run_and_close(GNOME_DIALOG(err));
-}
-
-void
-passphrase_dialog(char *message)
-{
-        char *passphrase;
-        char **messages;
-        int result, i, grab_server, grab_pointer;
-        GtkWidget *dialog, *entry, *label;
-
-        grab_server = (getenv("GNOME_SSH_ASKPASS_GRAB_SERVER") != NULL);
-        grab_pointer = (getenv("GNOME_SSH_ASKPASS_GRAB_POINTER") != NULL);
-
-        dialog = gnome_dialog_new("OpenSSH", GNOME_STOCK_BUTTON_OK,
-            GNOME_STOCK_BUTTON_CANCEL, NULL);
-
-        messages = g_strsplit(message, "\\n", 0);
-        if (messages)
-                for(i = 0; messages[i]; i++) {
-                        label = gtk_label_new(messages[i]);
-                        gtk_box_pack_start(GTK_BOX(GNOME_DIALOG(dialog)->vbox),
-                            label, FALSE, FALSE, 0);
-                }
-
-        entry = gtk_entry_new();
-        gtk_box_pack_start(GTK_BOX(GNOME_DIALOG(dialog)->vbox), entry, FALSE, 
-            FALSE, 0);
-        gtk_entry_set_visibility(GTK_ENTRY(entry), FALSE);
-        gtk_widget_grab_focus(entry);
-
-        /* Center window and prepare for grab */
-        gtk_object_set(GTK_OBJECT(dialog), "type", GTK_WINDOW_POPUP, NULL);
-        gnome_dialog_set_default(GNOME_DIALOG(dialog), 0);
-        gtk_window_set_position (GTK_WINDOW(dialog), GTK_WIN_POS_CENTER);
-        gtk_window_set_policy(GTK_WINDOW(dialog), FALSE, FALSE, TRUE);
-        gnome_dialog_close_hides(GNOME_DIALOG(dialog), TRUE);
-        gtk_container_set_border_width(GTK_CONTAINER(GNOME_DIALOG(dialog)->vbox),
-            GNOME_PAD);
-        gtk_widget_show_all(dialog);
-
-        /* Grab focus */
-        if (grab_server)
-                XGrabServer(GDK_DISPLAY());
-        if (grab_pointer && gdk_pointer_grab(dialog->window, TRUE, 0, 
-            NULL, NULL, GDK_CURRENT_TIME))
-                goto nograb;
-        if (gdk_keyboard_grab(dialog->window, FALSE, GDK_CURRENT_TIME))
-                goto nograbkb;
-
-        /* Make <enter> close dialog */
-        gnome_dialog_editable_enters(GNOME_DIALOG(dialog), GTK_EDITABLE(entry));
-
-        /* Run dialog */
-        result = gnome_dialog_run(GNOME_DIALOG(dialog));
-
-        /* Ungrab */
-        if (grab_server)
-                XUngrabServer(GDK_DISPLAY());
-        if (grab_pointer)
-                gdk_pointer_ungrab(GDK_CURRENT_TIME);
-        gdk_keyboard_ungrab(GDK_CURRENT_TIME);
-        gdk_flush();
-
-        /* Report passphrase if user selected OK */
-        passphrase = gtk_entry_get_text(GTK_ENTRY(entry));
-        if (result == 0)
-                puts(passphrase);
-                
-        /* Zero passphrase in memory */
-        memset(passphrase, '\0', strlen(passphrase));
-        gtk_entry_set_text(GTK_ENTRY(entry), passphrase);
-                        
-        gnome_dialog_close(GNOME_DIALOG(dialog));
-        return;
-
-        /* At least one grab failed - ungrab what we got, and report
-           the failure to the user.  Note that XGrabServer() cannot
-           fail.  */
- nograbkb:
-        gdk_pointer_ungrab(GDK_CURRENT_TIME);
- nograb:
-        if (grab_server)
-                XUngrabServer(GDK_DISPLAY());
-        gnome_dialog_close(GNOME_DIALOG(dialog));
-        
-        report_failed_grab();
-}
-
-int
-main(int argc, char **argv)
-{
-        char *message;
-        
-        gnome_init("GNOME ssh-askpass", "0.1", argc, argv);
-
-        if (argc == 2)
-                message = argv[1];
-        else
-                message = "Enter your OpenSSH passphrase:";
-
-        setvbuf(stdout, 0, _IONBF, 0);
-        passphrase_dialog(message);
-        return 0;
-}
diff --git a/contrib/solaris/buildpkg.sh b/contrib/solaris/buildpkg.sh
deleted file mode 100755
index 29d096306..000000000
--- a/contrib/solaris/buildpkg.sh
+++ /dev/null
@@ -1,386 +0,0 @@
-#!/bin/sh
-#
-# Fake Root Solaris/SVR4/SVR5 Build System - Prototype
-#
-# The following code has been provide under Public Domain License.  I really
-# don't care what you use it for.  Just as long as you don't complain to me
-# nor my employer if you break it. - Ben Lindstrom (mouring@eviladmin.org)
-#
-umask 022
-#
-# Options for building the package
-# You can create a config.local with your customized options
-#
-# uncommenting TEST_DIR and using
-# configure --prefix=/var/tmp --with-privsep-path=/var/tmp/empty
-# and
-# PKGNAME=tOpenSSH should allow testing a package without interfering
-# with a real OpenSSH package on a system. This is not needed on systems
-# that support the -R option to pkgadd.
-#TEST_DIR=/var/tmp      # leave commented out for production build
-PKGNAME=OpenSSH
-SYSVINIT_NAME=opensshd
-MAKE=${MAKE:="make"}
-SSHDUID=67      # Default privsep uid
-SSHDGID=67      # Default privsep gid
-# uncomment these next three as needed
-#PERMIT_ROOT_LOGIN=no
-#X11_FORWARDING=yes
-#USR_LOCAL_IS_SYMLINK=yes
-# list of system directories we do NOT want to change owner/group/perms
-# when installing our package
-SYSTEM_DIR="/etc        \
-/etc/init.d             \
-/etc/rcS.d              \
-/etc/rc0.d              \
-/etc/rc1.d              \
-/etc/rc2.d              \
-/etc/opt                \
-/opt                    \
-/opt/bin                \
-/usr                    \
-/usr/bin                \
-/usr/lib                \
-/usr/sbin               \
-/usr/share              \
-/usr/share/man          \
-/usr/share/man/man1     \
-/usr/share/man/man8     \
-/usr/local              \
-/usr/local/bin          \
-/usr/local/etc          \
-/usr/local/libexec      \
-/usr/local/man          \
-/usr/local/man/man1     \
-/usr/local/man/man8     \
-/usr/local/sbin         \
-/usr/local/share        \
-/var                    \
-/var/opt                \
-/var/run                \
-/var/tmp                \
-/tmp"
-
-# We may need to build as root so we make sure PATH is set up
-# only set the path if it's not set already
-[ -d /usr/local/bin ]  &&  {
-        echo $PATH | grep ":/usr/local/bin"  > /dev/null 2>&1
-        [ $? -ne 0 ] && PATH=$PATH:/usr/local/bin
-}
-[ -d /usr/ccs/bin ]  &&  {
-        echo $PATH | grep ":/usr/ccs/bin"  > /dev/null 2>&1
-        [ $? -ne 0 ] && PATH=$PATH:/usr/ccs/bin
-}
-export PATH
-#
-
-[ -f Makefile ]  ||  {
-        echo "Please run this script from your build directory"
-        exit 1
-}
-
-# we will look for config.local to override the above options
-[ -s ./config.local ]  &&  . ./config.local
-
-## Start by faking root install
-echo "Faking root install..."
-START=`pwd`
-OPENSSHD_IN=`dirname $0`/opensshd.in
-FAKE_ROOT=$START/package
-[ -d $FAKE_ROOT ]  &&  rm -fr $FAKE_ROOT
-mkdir $FAKE_ROOT
-${MAKE} install-nokeys DESTDIR=$FAKE_ROOT
-if [ $? -gt 0 ]
-then
-        echo "Fake root install failed, stopping."
-        exit 1
-fi
-
-## Fill in some details, like prefix and sysconfdir
-for confvar in prefix exec_prefix bindir sbindir libexecdir datadir mandir sysconfdir piddir
-do
-        eval $confvar=`grep "^$confvar=" Makefile | cut -d = -f 2`
-done
-
-
-## Collect value of privsep user
-for confvar in SSH_PRIVSEP_USER
-do
-        eval $confvar=`awk '/#define[ \t]'$confvar'/{print $3}' config.h`
-done
-
-## Set privsep defaults if not defined
-if [ -z "$SSH_PRIVSEP_USER" ]
-then
-        SSH_PRIVSEP_USER=sshd
-fi
-
-## Extract common info requires for the 'info' part of the package.
-VERSION=`./ssh -V 2>&1 | sed -e 's/,.*//'`
-
-UNAME_S=`uname -s`
-case ${UNAME_S} in
-        SunOS)  UNAME_S=Solaris
-                ARCH=`uname -p`
-                RCS_D=yes
-                DEF_MSG="(default: n)"
-                ;;
-        *)      ARCH=`uname -m`
-                DEF_MSG="\n" ;;
-esac
-
-## Setup our run level stuff while we are at it.
-mkdir -p $FAKE_ROOT${TEST_DIR}/etc/init.d
-
-## setup our initscript correctly
-sed -e "s#%%configDir%%#${sysconfdir}#g"        \
-    -e "s#%%openSSHDir%%#$prefix#g"             \
-    -e "s#%%pidDir%%#${piddir}#g"               \
-        ${OPENSSHD_IN}  > $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
-chmod 744 $FAKE_ROOT${TEST_DIR}/etc/init.d/${SYSVINIT_NAME}
-
-[ "${PERMIT_ROOT_LOGIN}" = no ]  &&  \
-        perl -p -i -e "s/#PermitRootLogin yes/PermitRootLogin no/" \
-                $FAKE_ROOT/${sysconfdir}/sshd_config
-[ "${X11_FORWARDING}" = yes ]  &&  \
-        perl -p -i -e "s/#X11Forwarding no/X11Forwarding yes/" \
-                $FAKE_ROOT/${sysconfdir}/sshd_config
-# fix PrintMotd
-perl -p -i -e "s/#PrintMotd yes/PrintMotd no/" \
-        $FAKE_ROOT/${sysconfdir}/sshd_config
-
-# We don't want to overwrite config files on multiple installs
-mv $FAKE_ROOT/${sysconfdir}/ssh_config $FAKE_ROOT/${sysconfdir}/ssh_config.default
-mv $FAKE_ROOT/${sysconfdir}/sshd_config $FAKE_ROOT/${sysconfdir}/sshd_config.default
-[ -f $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds ]  &&  \
-mv $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds $FAKE_ROOT/${sysconfdir}/ssh_prng_cmds.default
-
-cd $FAKE_ROOT
-
-## Ok, this is outright wrong, but it will work.  I'm tired of pkgmk
-## whining.
-for i in *; do
-  PROTO_ARGS="$PROTO_ARGS $i=/$i";
-done
-
-## Build info file
-echo "Building pkginfo file..."
-cat > pkginfo << _EOF
-PKG=$PKGNAME
-NAME="OpenSSH Portable for ${UNAME_S}"
-DESC="Secure Shell remote access utility; replaces telnet and rlogin/rsh."
-VENDOR="OpenSSH Portable Team - http://www.openssh.com/portable.html"
-ARCH=$ARCH
-VERSION=$VERSION
-CATEGORY="Security,application"
-BASEDIR=/
-CLASSES="none"
-_EOF
-
-## Build preinstall file
-echo "Building preinstall file..."
-cat > preinstall << _EOF
-#! /sbin/sh
-#
-[ "\${PRE_INS_STOP}" = "yes" ]  &&  ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
-exit 0
-_EOF
-
-## Build postinstall file
-echo "Building postinstall file..."
-cat > postinstall << _EOF
-#! /sbin/sh
-#
-[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config ]  ||  \\
-        cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config.default \\
-                \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config
-[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config ]  ||  \\
-        cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config.default \\
-                \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config
-[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds.default ]  &&  {
-        [ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds ]  ||  \\
-        cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds.default \\
-                \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds
-}
-
-# make rc?.d dirs only if we are doing a test install
-[ -n "${TEST_DIR}" ]  &&  {
-        [ "$RCS_D" = yes ]  &&  mkdir -p ${TEST_DIR}/etc/rcS.d
-        mkdir -p ${TEST_DIR}/etc/rc0.d
-        mkdir -p ${TEST_DIR}/etc/rc1.d
-        mkdir -p ${TEST_DIR}/etc/rc2.d
-}
-
-if [ "\${USE_SYM_LINKS}" = yes ]
-then
-        [ "$RCS_D" = yes ]  &&  \
-installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/K30${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
-        installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/K30${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
-        installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/K30${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
-        installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/S98${SYSVINIT_NAME}=../init.d/${SYSVINIT_NAME} s
-else
-        [ "$RCS_D" = yes ]  &&  \
-installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rcS.d/K30${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
-        installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc0.d/K30${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
-        installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc1.d/K30${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
-        installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR/etc/rc2.d/S98${SYSVINIT_NAME}=$TEST_DIR/etc/init.d/${SYSVINIT_NAME} l
-fi
-
-# If piddir doesn't exist we add it. (Ie. --with-pid-dir=/var/opt/ssh)
-[ -d $piddir ]  ||  installf ${PKGNAME} \${PKG_INSTALL_ROOT}$TEST_DIR$piddir d 755 root sys
-
-installf -f ${PKGNAME}
-
-# Use chroot to handle PKG_INSTALL_ROOT
-if [ ! -z "\${PKG_INSTALL_ROOT}" ]
-then
-        chroot="chroot \${PKG_INSTALL_ROOT}"
-fi
-# If this is a test build, we will skip the groupadd/useradd/passwd commands
-if [ ! -z "${TEST_DIR}" ]
-then
-        chroot=echo
-fi
-
-if egrep '^[ \t]*UsePrivilegeSeparation[ \t]+no' \${PKG_INSTALL_ROOT}/$sysconfdir/sshd_config >/dev/null
-then
-        echo "UsePrivilegeSeparation disabled in config, not creating PrivSep user"
-        echo "or group."
-else
-        echo "UsePrivilegeSeparation enabled in config (or defaulting to on)."
-
-        # create group if required
-        if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
-        then
-                echo "PrivSep group $SSH_PRIVSEP_USER already exists."
-        else
-                # Use gid of 67 if possible
-                if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/group | egrep '^'$SSHDGID'\$' >/dev/null
-                then
-                        :
-                else
-                        sshdgid="-g $SSHDGID"
-                fi
-                echo "Creating PrivSep group $SSH_PRIVSEP_USER."
-                \$chroot /usr/sbin/groupadd \$sshdgid $SSH_PRIVSEP_USER
-        fi
-
-        # Create user if required
-        if cut -f1 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSH_PRIVSEP_USER'\$' >/dev/null
-        then
-                echo "PrivSep user $SSH_PRIVSEP_USER already exists."
-        else
-                # Use uid of 67 if possible
-                if cut -f3 -d: \${PKG_INSTALL_ROOT}/etc/passwd | egrep '^'$SSHDGID'\$' >/dev/null
-                then
-                        :
-                else
-                        sshduid="-u $SSHDUID"
-                fi
-                echo "Creating PrivSep user $SSH_PRIVSEP_USER."
-                \$chroot /usr/sbin/useradd -c 'SSHD PrivSep User' -s /bin/false -g $SSH_PRIVSEP_USER \$sshduid $SSH_PRIVSEP_USER
-                \$chroot /usr/bin/passwd -l $SSH_PRIVSEP_USER
-        fi
-fi
-
-[ "\${POST_INS_START}" = "yes" ]  &&  ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} start
-exit 0
-_EOF
-
-## Build preremove file
-echo "Building preremove file..."
-cat > preremove << _EOF
-#! /sbin/sh
-#
-${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} stop
-exit 0
-_EOF
-
-## Build request file
-echo "Building request file..."
-cat > request << _EOF
-trap 'exit 3' 15
-USE_SYM_LINKS=no
-PRE_INS_STOP=no
-POST_INS_START=no
-# Use symbolic links?
-ans=\`ckyorn -d n \
--p "Do you want symbolic links for the start/stop scripts? ${DEF_MSG}"\` || exit \$?
-case \$ans in
-        [y,Y]*) USE_SYM_LINKS=yes ;;
-esac
-
-# determine if should restart the daemon
-if [ -s ${piddir}/sshd.pid  -a  -f ${TEST_DIR}/etc/init.d/${SYSVINIT_NAME} ]
-then
-        ans=\`ckyorn -d n \
--p "Should the running sshd daemon be restarted? ${DEF_MSG}"\` || exit \$?
-        case \$ans in
-                [y,Y]*) PRE_INS_STOP=yes
-                        POST_INS_START=yes
-                        ;;
-        esac
-
-else
-
-# determine if we should start sshd
-        ans=\`ckyorn -d n \
--p "Start the sshd daemon after installing this package? ${DEF_MSG}"\` || exit \$?
-        case \$ans in
-                [y,Y]*) POST_INS_START=yes ;;
-        esac
-fi
-
-# make parameters available to installation service,
-# and so to any other packaging scripts
-cat >\$1 <<!
-USE_SYM_LINKS='\$USE_SYM_LINKS'
-PRE_INS_STOP='\$PRE_INS_STOP'
-POST_INS_START='\$POST_INS_START'
-!
-exit 0
-
-_EOF
-
-## Build space file
-echo "Building space file..."
-cat > space << _EOF
-# extra space required by start/stop links added by installf in postinstall
-$TEST_DIR/etc/rc0.d/K30${SYSVINIT_NAME} 0 1
-$TEST_DIR/etc/rc1.d/K30${SYSVINIT_NAME} 0 1
-$TEST_DIR/etc/rc2.d/S98${SYSVINIT_NAME} 0 1
-_EOF
-[ "$RCS_D" = yes ]  &&  \
-echo "$TEST_DIR/etc/rcS.d/K30${SYSVINIT_NAME} 0 1" >> space
-
-## Next Build our prototype
-echo "Building prototype file..."
-cat >mk-proto.awk << _EOF
-            BEGIN { print "i pkginfo"; print "i preinstall"; \\
-                    print "i postinstall"; print "i preremove"; \\
-                    print "i request"; print "i space"; \\
-                    split("$SYSTEM_DIR",sys_files); }
-            {
-             for (dir in sys_files) { if ( \$3 != sys_files[dir] )
-                     { \$5="root"; \$6="sys"; }
-                else
-                     { \$4="?"; \$5="?"; \$6="?"; break;}
-            } }
-            { print; }
-_EOF
-find . | egrep -v "prototype|pkginfo|mk-proto.awk" | sort | \
-        pkgproto $PROTO_ARGS | nawk -f mk-proto.awk > prototype
-
-# /usr/local is a symlink on some systems
-[ "${USR_LOCAL_IS_SYMLINK}" = yes ]  &&  {
-        grep -v "^d none /usr/local ? ? ?$" prototype > prototype.new
-        mv prototype.new prototype
-}
-
-## Step back a directory and now build the package.
-echo "Building package.."
-cd ..
-pkgmk -d ${FAKE_ROOT} -f $FAKE_ROOT/prototype -o
-echo | pkgtrans -os ${FAKE_ROOT} ${START}/$PKGNAME-$UNAME_S-$ARCH-$VERSION.pkg
-rm -rf $FAKE_ROOT
-
diff --git a/contrib/solaris/opensshd.in b/contrib/solaris/opensshd.in
deleted file mode 100755
index 50e18deea..000000000
--- a/contrib/solaris/opensshd.in
+++ /dev/null
@@ -1,82 +0,0 @@
-#!/sbin/sh
-# Donated code that was put under PD license.
-#
-# Stripped PRNGd out of it for the time being.
-
-umask 022
-
-CAT=/usr/bin/cat
-KILL=/usr/bin/kill
-
-prefix=%%openSSHDir%%
-etcdir=%%configDir%%
-piddir=%%pidDir%%
-
-SSHD=$prefix/sbin/sshd
-PIDFILE=$piddir/sshd.pid
-SSH_KEYGEN=$prefix/bin/ssh-keygen
-HOST_KEY_RSA1=$etcdir/ssh_host_key
-HOST_KEY_DSA=$etcdir/ssh_host_dsa_key
-HOST_KEY_RSA=$etcdir/ssh_host_rsa_key
-
-
-checkkeys() {
-    if [ ! -f $HOST_KEY_RSA1 ]; then
-        ${SSH_KEYGEN} -t rsa1 -f ${HOST_KEY_RSA1} -N ""
-    fi
-    if [ ! -f $HOST_KEY_DSA ]; then
-        ${SSH_KEYGEN} -t dsa -f ${HOST_KEY_DSA} -N ""
-    fi
-    if [ ! -f $HOST_KEY_RSA ]; then
-        ${SSH_KEYGEN} -t rsa -f ${HOST_KEY_RSA} -N ""
-    fi
-}
-
-stop_service() {
-    if [  -r $PIDFILE  -a  ! -z ${PIDFILE}  ]; then
-        PID=`${CAT} ${PIDFILE}`
-    fi
-    if [  ${PID:=0} -gt 1 -a  ! "X$PID" = "X "  ]; then
-        ${KILL} ${PID}
-    else
-        echo "Unable to read PID file"
-    fi
-}
-
-start_service() {
-    # XXX We really should check if the service is already going, but
-    # XXX we will opt out at this time. - Bal
-
-    # Check to see if we have keys that need to be made
-    checkkeys
-
-    # Start SSHD
-    echo "starting $SSHD... \c"         ; $SSHD
-
-    sshd_rc=$?
-    if [ $sshd_rc -ne 0 ]; then
-        echo "$0: Error ${sshd_rc} starting ${SSHD}... bailing."
-        exit $sshd_rc
-    fi
-    echo done.
-}
-
-case $1 in
-
-'start')
-    start_service
-    ;;
-
-'stop')
-    stop_service
-    ;;
-
-'restart')
-    stop_service
-    start_service
-    ;;
-
-*)
-    echo "$0:  usage:  $0 {start|stop|restart}"
-    ;;
-esac
diff --git a/contrib/ssh-copy-id b/contrib/ssh-copy-id
index a1c0a9234..1555b5d37 100644
--- a/contrib/ssh-copy-id
+++ b/contrib/ssh-copy-id
@@ -24,7 +24,7 @@ else
   fi
 fi
 
-if [ -z "`eval $GET_ID`" -a -r "${ID_FILE}" ] ; then
+if [ -z "`eval $GET_ID`" ] && [ -r "${ID_FILE}" ] ; then
   GET_ID="cat ${ID_FILE}"
 fi
 
diff --git a/debian/.cvsignore b/debian/.cvsignore
new file mode 100644
index 000000000..9ec0ecde2
--- /dev/null
+++ b/debian/.cvsignore
@@ -0,0 +1,11 @@
+files
+tmp
+openssh-client
+openssh-server
+ssh
+openssh-client-udeb
+openssh-server-udeb
+ssh-askpass-gnome
+*.debhelper
+*substvars
+*.templates
diff --git a/debian/NEWS b/debian/NEWS
new file mode 100644
index 000000000..f2359de35
--- /dev/null
+++ b/debian/NEWS
@@ -0,0 +1,32 @@
+openssh (1:3.8.1p1-9) experimental; urgency=low
+
+  The ssh package has been split into openssh-client and openssh-server. If
+  you had previously requested that the sshd server should not be run, then
+  that request will still be honoured. However, the recommended approach is
+  now to remove the openssh-server package if you do not want to run sshd.
+  You can remove the old /etc/ssh/sshd_not_to_be_run marker file after doing
+  that.
+
+ -- Colin Watson <cjwatson@debian.org>  Mon,  2 Aug 2004 20:48:54 +0100
+
+openssh (1:3.5p1-1) unstable; urgency=low
+
+  This version of OpenSSH disables the environment option for public keys by
+  default, in order to avoid certain attacks (for example, LD_PRELOAD). If
+  you are using this option in an authorized_keys file, beware that the keys
+  in question will no longer work until the option is removed.
+
+  To re-enable this option, set "PermitUserEnvironment yes" in
+  /etc/ssh/sshd_config after the upgrade is complete, taking note of the
+  warning in the sshd_config(5) manual page.
+
+ -- Colin Watson <cjwatson@debian.org>  Sat, 26 Oct 2002 19:41:51 +0100
+
+openssh (1:3.0.1p1-1) unstable; urgency=high
+
+  As of version 3, OpenSSH no longer uses separate files for ssh1 and ssh2
+  keys. This means the authorized_keys2 and known_hosts2 files are no longer
+  needed. They will still be read in order to maintain backward
+  compatibility.
+
+ -- Matthew Vernon <matthew@debian.org>  Thu, 28 Nov 2001 17:43:01 +0000
diff --git a/debian/README.Debian b/debian/README.Debian
new file mode 100644
index 000000000..db867e186
--- /dev/null
+++ b/debian/README.Debian
@@ -0,0 +1,243 @@
+OpenSSH for Debian
+------------------
+
+Although this package is widely referred to as OpenSSH, it is actually
+a branch of an early version of ssh which has been tidied up by the
+OpenBSD folks.
+
+It has been decided that this version should have the privilege of
+carrying the ``ssh'' name in Debian, since it is the only version of
+ssh that is going to make it into Debian proper, being the only one 
+that complies with the Debian Free Software Guidelines.
+
+If you were expecting to get the non-free version of ssh (1.2.27 or
+whatever) when you installed this package, then you're out of luck, as
+Debian don't ship it.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+BUILD ISSUES
+============
+
+To build the openssh package for woody, set DEB_BUILD_SSH_WOODY=1 in
+your environment. This is necessary due to non-backward-compatible
+changes in PAM support.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+UPGRADE ISSUES
+==============
+
+Privilege Separation
+--------------------
+
+As of 3.3, openssh has employed privilege separation to reduce the
+quantity of code that runs as root, thereby reducing the impact of
+some security holes in sshd. This now also works properly with PAM.
+
+Privilege separation is turned on by default, so, if you decide you
+want it turned off, you need to add "UsePrivilegeSeparation no" to
+/etc/ssh/sshd_config.
+
+PermitRootLogin set to yes
+--------------------------
+
+This is now the default setting (in line with upstream), and people
+who asked for an automatically-generated configuration file when
+upgrading from potato (or on a new install) will have this setting in
+their /etc/ssh/sshd_config file. 
+
+Should you wish to change this setting, edit /etc/ssh/sshd_config, and
+change:
+PermitRootLogin yes
+to:
+PermitRootLogin no
+
+Having PermitRootLogin set to yes means that an attacker that knows
+the root password can ssh in directly (without having to go via a user
+account). If you set it to no, then they must compromise a normal user
+account. In the vast majority of cases, this does not give added
+security; remember that any account you su to root from is equivalent
+to root - compromising this account gives an attacker access to root
+easily. If you only ever log in as root from the physical console,
+then you probably want to set this value to no.
+
+As an aside, PermitRootLogin can also be set to "without-password" or
+"forced-commands-only" - see sshd(8) for more details.
+
+DO NOT FILE BUG REPORTS SAYING YOU THINK THIS DEFAULT IS INCORRECT!
+
+The argument above is somewhat condensed; I have had this discussion
+at great length with many people. If you think the default is
+incorrect, and feel strongly enough to want to argue with me about it,
+then send me email to matthew@debian.org. I will close bug reports
+claiming the default is incorrect.
+
+SSH now uses protocol 2 by default
+----------------------------------
+
+This means all your keyfiles you used for protocol version 1 need to
+be re-generated. The server keys are done automatically, but for RSA
+authentication, please read the ssh-keygen manpage.
+
+If you have an automatically generated configuration file, and decide
+at a later stage that you do want to support protocol version 1 (not
+recommended, but note that the ssh client shipped with Debian potato
+only supported protocol version 1), then you need to do the following:
+
+Change /etc/ssh/sshd_config such that:
+Protocol 2
+becomes:
+Protocol 2,1
+Also add the line:
+HostKey /etc/ssh/ssh_host_key
+
+If you do not already have an RSA1 host key in /etc/ssh/ssh_host_key,
+you will need to generate one. To do so, run this command as root:
+
+  ssh-keygen -f /etc/ssh/ssh_host_key -N '' -t rsa1
+
+X11 Forwarding
+--------------
+
+ssh's default for ForwardX11 has been changed to ``no'' because it has
+been pointed out that logging into remote systems administered by
+untrusted people is likely to open you up to X11 attacks, so you
+should have to actively decide that you trust the remote machine's
+root, before enabling X11.  I strongly recommend that you do this on a
+machine-by-machine basis, rather than just enabling it in the default
+host settings.
+
+In order for X11 forwarding to work, you need to install xauth on the
+server. In Debian this is in the xbase-clients package.
+
+As of OpenSSH 3.1, the remote $DISPLAY uses localhost by default to reduce
+the security risks of X11 forwarding. Look up X11UseLocalhost in
+sshd_config(8) if this is a problem.
+
+OpenSSH 3.8 invented ForwardX11Trusted, which when set to no causes the
+ssh client to create an untrusted X cookie so that attacks on the
+forwarded X11 connection can't become attacks on X clients on the remote
+machine. However, this has some problems in implementation - notably a
+very short timeout of the untrusted cookie - breaks large numbers of
+existing setups, and generally seems immature. The Debian package
+therefore sets the default for this option to "yes" (in ssh itself,
+rather than in ssh_config).
+
+Fallback to RSH
+---------------
+
+The default for this setting has been changed from Yes to No, for
+security reasons, and to stop the delay attempting to rsh to machines
+that don't offer the service.  Simply switch it back on in either
+/etc/ssh/ssh_config or ~/.ssh/config for those machines that you need
+it for.
+
+Setgid ssh-agent and environment variables
+------------------------------------------
+
+As of version 1:3.5p1-1, ssh-agent is installed setgid to prevent ptrace()
+attacks retrieving private key material. This has the side-effect of causing
+glibc to remove certain environment variables which might have security
+implications for set-id programs, including LD_PRELOAD, LD_LIBRARY_PATH, and
+TMPDIR.
+
+If you need to set any of these environment variables, you will need to do
+so in the program exec()ed by ssh-agent. This may involve creating a small
+wrapper script.
+
+Symlink Hostname invocation
+---------------------------
+
+This version of ssh no longer includes support for invoking ssh with the
+hostname as the name of the file run.  People wanting this support should
+use the ssh-argv0 script.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+OTHER ISSUES
+============
+
+/usr/bin/ssh not SUID
+---------------------
+
+Due to Debian bug #164325, RhostsRSAAuthentication can only be used if ssh
+is SUID.  Until this is fixed, if that is a problem, use:
+
+   dpkg-statoverride 
+
+or if that's also missing, use this:
+
+   chown root.root /usr/bin/ssh
+   chmod 04755 /usr/bin/ssh
+
+Authorization Forwarding
+------------------------
+
+Similarly, root on a remote server could make use of your ssh-agent
+(while you're logged into their machine) to obtain access to machines
+which trust your keys.  This feature is therefore disabled by default.
+You should only re-enable it for those hosts (in your ~/.ssh/config or
+/etc/ssh/ssh_config) where you are confident that the remote machine
+is not a threat.
+
+Problems logging in with RSA authentication
+-------------------------------------------
+
+If you have trouble logging in with RSA authentication then the
+problem is probably caused by the fact that you have your home
+directory writable by group, as well as user (this is the default on
+Debian systems).
+
+Depending upon other settings on your system (i.e. other users being
+in your group) this could open a security hole, so you will need to
+make your home directory writable only by yourself.  Run this command,
+as yourself:
+
+  chmod g-w ~/
+
+to remove group write permissions.  If you use ssh-copy-id to install your
+keys, it does this for you.
+
+-L option of ssh nonfree
+------------------------
+
+non-free ssh supported the usage of the option -L to use a non privileged
+port for scp. This option will not be supported by scp from openssh. 
+
+Please use instead scp -o "UsePrivilegedPort=no" as documented in the 
+manpage to scp itself. 
+
+Problem logging in because of TCP-Wrappers
+------------------------------------------
+
+ssh is compiled with support for tcp-wrappers. So if you can no longer
+log into your system, please check that /etc/hosts.allow and /etc/hosts.deny
+are configured so that ssh is not blocked. 
+
+Kerberos Authentication
+-----------------------
+
+ssh is compiled without support for kerberos authentication, and there are
+no current plans to support this.  Thus the KerberosAuthentication and 
+KerberosTgtPassing options will not be recognised.
+
+Interoperability between scp and the ssh.com SSH server
+-------------------------------------------------------
+
+In version 2 and greater of the commercial SSH server produced by SSH
+Communications Security, scp was changed to use SFTP (SSH2's file transfer
+protocol) instead of the traditional rcp-over-ssh, thereby breaking
+compatibility. The OpenSSH developers regard this as a bug in the ssh.com
+server, and do not currently intend to change OpenSSH's scp to match.
+
+Workarounds for this problem are to install scp1 on the server (scp2 will
+fall back to it), to use sftp, or to use some other transfer mechanism such
+as rsync-over-ssh or tar-over-ssh.
+
+--
+Matthew Vernon
+<matthew@debian.org>
+and
+Colin Watson
+<cjwatson@debian.org>
diff --git a/debian/changelog b/debian/changelog
new file mode 100644
index 000000000..42d833e39
--- /dev/null
+++ b/debian/changelog
@@ -0,0 +1,1588 @@
+openssh (1:3.9p1-1) UNRELEASED; urgency=low
+
+  * New upstream release.
+  * Build ssh in binary-indep, not binary-arch (thanks, LaMont Jones).
+
+ -- Colin Watson <cjwatson@debian.org>  Wed,  1 Dec 2004 16:23:23 +0000
+
+openssh (1:3.8.1p1-14) experimental; urgency=low
+
+  * We use DH_COMPAT=2, so build-depend on debhelper (>= 2).
+  * Fix timing information leak allowing discovery of invalid usernames in
+    PAM keyboard-interactive authentication (backported from a patch by
+    Darren Tucker; closes: #281595).
+  * Make sure that there's a delay in PAM keyboard-interactive
+    authentication when PermitRootLogin is not set to yes and the correct
+    root password is entered (closes: #248747).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 28 Nov 2004 18:09:37 +0000
+
+openssh (1:3.8.1p1-13) experimental; urgency=low
+
+  * Enable threading for PAM, on Sam Hartman's advice (closes: #278394).
+  * debconf template translations:
+    - Update Dutch (thanks, cobaco; closes: #278715).
+  * Correct README.Debian's ForwardX11Trusted description (closes: #280190).
+
+ -- Colin Watson <cjwatson@debian.org>  Fri, 12 Nov 2004 12:03:13 +0000
+
+openssh (1:3.8.1p1-12) experimental; urgency=low
+
+  * Preserve /etc/ssh/sshd_config ownership/permissions (closes: #276754).
+  * Shorten the version string from the form "OpenSSH_3.8.1p1 Debian
+    1:3.8.1p1-8.sarge.1" to "OpenSSH_3.8.1p1 Debian-8.sarge.1", as some SSH
+    implementations apparently have problems with the long version string.
+    This is of course a bug in those implementations, but since the extent
+    of the problem is unknown it's best to play safe (closes: #275731).
+  * debconf template translations:
+    - Add Finnish (thanks, Matti Pöllä; closes: #265339).
+    - Update Danish (thanks, Morten Brix Pedersen; closes: #275895).
+    - Update French (thanks, Denis Barbier; closes: #276703).
+    - Update Japanese (thanks, Kenshi Muto; closes: #277438).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 24 Oct 2004 19:21:17 +0100
+
+openssh (1:3.8.1p1-11) experimental; urgency=high
+
+  * Move sshd_config(5) to openssh-server, where it belongs.
+  * If PasswordAuthentication is disabled, then offer to disable
+    ChallengeResponseAuthentication too. The current PAM code will attempt
+    password-style authentication if ChallengeResponseAuthentication is
+    enabled (closes: #250369).
+  * This will ask a question of anyone who installed fresh with 1:3.8p1-2 or
+    later and then upgraded. Sorry about that ... for this reason, the
+    default answer is to leave ChallengeResponseAuthentication enabled.
+
+ -- Colin Watson <cjwatson@debian.org>  Wed,  6 Oct 2004 14:28:20 +0100
+
+openssh (1:3.8.1p1-10) experimental; urgency=low
+
+  * Don't install the ssh-askpass-gnome .desktop file by default; I've had
+    too many GNOME people tell me it's the wrong thing to be doing. I've
+    left it in /usr/share/doc/ssh-askpass-gnome/examples/ for now.
+
+ -- Colin Watson <cjwatson@debian.org>  Wed, 25 Aug 2004 18:18:14 +0100
+
+openssh (1:3.8.1p1-9) experimental; urgency=low
+
+  * Split the ssh binary package into openssh-client and openssh-server
+    (closes: #39741). openssh-server depends on openssh-client for some
+    common functionality; it didn't seem worth creating yet another package
+    for this. openssh-client is priority standard, openssh-server optional.
+  * New transitional ssh package, priority optional, depending on
+    openssh-client and openssh-server. May be removed once nothing depends
+    on it.
+  * When upgrading from ssh to openssh-{client,server}, it's very difficult
+    for the maintainer scripts to find out what version we're upgrading from
+    without dodgy dpkg hackery. I've therefore taken the opportunity to move
+    a couple of debconf notes into NEWS files, namely ssh/ssh2_keys_merged
+    and ssh/user_environment_tell.
+  * Add a heuristic to try to make sure the sshd_config upgrade to >= 3.7
+    happens even though we don't know what version we're upgrading from.
+  * Remove /etc/ssh/sshd_not_to_be_run on purge of openssh-server. For now
+    (until sarge+2) it's still honoured to avoid breaking existing
+    configurations, but the right approach is now to remove the
+    openssh-server package if you don't want to run the server. Add a NEWS
+    item to that effect.
+
+ -- Colin Watson <cjwatson@debian.org>  Mon,  2 Aug 2004 20:48:54 +0100
+
+openssh (1:3.8.1p1-8.sarge.4) unstable; urgency=high
+
+  * Fix timing information leak allowing discovery of invalid usernames in
+    PAM keyboard-interactive authentication (backported from a patch by
+    Darren Tucker; closes: #281595).
+  * Make sure that there's a delay in PAM keyboard-interactive
+    authentication when PermitRootLogin is not set to yes and the correct
+    root password is entered (closes: #248747).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 28 Nov 2004 12:37:16 +0000
+
+openssh (1:3.8.1p1-8.sarge.3) unstable; urgency=low
+
+  * Enable threading for PAM, on Sam Hartman's advice (closes: #278394).
+  * debconf template translations:
+    - Update Dutch (thanks, cobaco; closes: #278715).
+  * Correct README.Debian's ForwardX11Trusted description (closes: #280190).
+
+ -- Colin Watson <cjwatson@debian.org>  Fri, 12 Nov 2004 10:31:12 +0000
+
+openssh (1:3.8.1p1-8.sarge.2) unstable; urgency=low
+
+  * Preserve /etc/ssh/sshd_config ownership/permissions (closes: #276754).
+  * Shorten the version string from the form "OpenSSH_3.8.1p1 Debian
+    1:3.8.1p1-8.sarge.1" to "OpenSSH_3.8.1p1 Debian-8.sarge.1", as some SSH
+    implementations apparently have problems with the long version string.
+    This is of course a bug in those implementations, but since the extent
+    of the problem is unknown it's best to play safe (closes: #275731).
+  * debconf template translations:
+    - Add Finnish (thanks, Matti Pöllä; closes: #265339).
+    - Update Danish (thanks, Morten Brix Pedersen; closes: #275895).
+    - Update French (thanks, Denis Barbier; closes: #276703).
+    - Update Japanese (thanks, Kenshi Muto; closes: #277438).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 24 Oct 2004 17:57:14 +0100
+
+openssh (1:3.8.1p1-8.sarge.1) unstable; urgency=high
+
+  * If PasswordAuthentication is disabled, then offer to disable
+    ChallengeResponseAuthentication too. The current PAM code will attempt
+    password-style authentication if ChallengeResponseAuthentication is
+    enabled (closes: #250369).
+  * This will ask a question of anyone who installed fresh with 1:3.8p1-2 or
+    later and then upgraded. Sorry about that ... for this reason, the
+    default answer is to leave ChallengeResponseAuthentication enabled.
+
+ -- Colin Watson <cjwatson@debian.org>  Wed,  6 Oct 2004 14:21:55 +0100
+
+openssh (1:3.8.1p1-8) unstable; urgency=high
+
+  * Matthew Vernon:
+    - Add a GPL exception to the licensing terms of the Debian patch
+      (closes: #211644).
+
+ -- Colin Watson <cjwatson@debian.org>  Thu, 29 Jul 2004 13:28:47 +0100
+
+openssh (1:3.8.1p1-7) unstable; urgency=low
+
+  * Re-enable shadow password support in openssh-server-udeb, at Bastian
+    Blank's request (closes: #260800).
+
+ -- Colin Watson <cjwatson@debian.org>  Thu, 22 Jul 2004 10:56:06 +0100
+
+openssh (1:3.8.1p1-6) unstable; urgency=low
+
+  * Implement hack in
+    http://lists.debian.org/debian-boot/2004/07/msg01207.html to get
+    openssh-client-udeb to show up as a retrievable debian-installer
+    component.
+  * Generate host keys in postinst only if the relevant HostKey directives
+    are found in sshd_config (closes: #87946).
+
+ -- Colin Watson <cjwatson@debian.org>  Wed, 21 Jul 2004 15:14:46 +0100
+
+openssh (1:3.8.1p1-5) unstable; urgency=medium
+
+  * Update German debconf template translation (thanks, Helge Kreutzmann;
+    closes: #252226).
+  * Remove Suggests: dnsutils, as it was only needed for
+    make-ssh-known-hosts (#93265), which has been replaced by ssh-keyscan.
+  * Disable shadow password support in openssh-server-udeb.
+  * Fix non-portable shell constructs in maintainer scripts, Makefile, and
+    ssh-copy-id (thanks, David Weinehall; closes: #258517).
+  * Apply patch from Darren Tucker to make the PAM authentication SIGCHLD
+    handler kill the PAM thread if its waitpid() call returns 0, as well as
+    the previous check for -1 (closes: #252676).
+  * Add scp and sftp to openssh-client-udeb. It might not be very 'u' any
+    more; oh well.
+
+ -- Colin Watson <cjwatson@debian.org>  Sat, 10 Jul 2004 13:57:27 +0100
+
+openssh (1:3.8.1p1-4) unstable; urgency=medium
+
+  * Kill off PAM thread if privsep slave dies (closes: #248125).
+
+ -- Colin Watson <cjwatson@debian.org>  Fri, 28 May 2004 17:58:45 -0300
+
+openssh (1:3.8.1p1-3) unstable; urgency=low
+
+  * Add ssh-keygen to openssh-server-udeb.
+
+ -- Colin Watson <cjwatson@debian.org>  Thu, 20 May 2004 16:31:52 +0100
+
+openssh (1:3.8.1p1-2) unstable; urgency=low
+
+  * Add Catalan debconf template translation (thanks, Aleix Badia i Bosch;
+    closes: #248748).
+  * openssh-client-udeb and openssh-server-udeb depend on libnss-files-udeb
+    (not yet uploaded).
+  * Restore ssh-askpass-gnome binary, lost by mistake.
+  * Don't link against libnsl in udeb builds.
+
+ -- Colin Watson <cjwatson@debian.org>  Thu, 20 May 2004 11:15:58 +0100
+
+openssh (1:3.8.1p1-1) unstable; urgency=low
+
+  * New upstream release.
+    - Use a longer buffer for tty names in utmp (closes: #247538).
+  * Make sure there's a newline at the end of sshd_config before adding
+    'UsePAM yes' (closes: #244829).
+  * Generate a new .orig.tar.gz without RFC.nroff, and remove
+    /usr/share/doc/ssh/RFC.gz (closes: #211640). It isn't DFSG-free and only
+    documents the obsolete SSH1 protocol, not to mention that it was never a
+    real RFC but only an Internet-Draft. It's available from
+    http://www.free.lp.se/bamse/draft-ylonen-ssh-protocol-00.txt if you want
+    it for some reason.
+  * Add openssh-client-udeb and openssh-server-udeb binary packages for use
+    in debian-installer. They still need libnss_files to be supplied in udeb
+    form by glibc.
+  * Work around lack of res_query weak alias in libresolv on amd64 (see
+    #242462, awaiting real fix upstream).
+  * Fix grammar in sshd(8) (closes: #238753).
+  * Add .desktop file and icon for ssh-askpass-gnome (closes: #232333).
+  * Update Polish debconf template translation (thanks, Emil Nowak;
+    closes: #242808).
+  * Add Turkish debconf template translation (thanks, Recai OktaÅŸ;
+    closes: #246068).
+
+ -- Colin Watson <cjwatson@debian.org>  Tue, 11 May 2004 23:38:10 +0100
+
+openssh (1:3.8p1-3) unstable; urgency=low
+
+  * Remove deprecated ReverseMappingCheck option from newly generated
+    sshd_config files (closes: #239987).
+  * Build everything apart from contrib in a subdirectory, to allow for
+    multiple builds.
+  * Some older kernels are missing setresuid() and setresgid(), so don't try
+    to use them. setreuid() and setregid() will do well enough for our
+    purposes (closes: #239999).
+
+ -- Colin Watson <cjwatson@debian.org>  Mon,  5 Apr 2004 21:23:43 +0100
+
+openssh (1:3.8p1-2) unstable; urgency=medium
+
+  * Disable PasswordAuthentication for new installations (closes: #236810).
+  * Turn off the new ForwardX11Trusted by default, returning to the
+    semantics of 3.7 and earlier, since it seems immature and causes far too
+    many problems with existing setups. See README.Debian for details
+    (closes: #237021).
+
+ -- Colin Watson <cjwatson@debian.org>  Wed, 10 Mar 2004 10:33:07 +0000
+
+openssh (1:3.8p1-1) unstable; urgency=low
+
+  * New upstream release (closes: #232281):
+    - New PAM implementation based on that in FreeBSD. This runs PAM session
+      modules before dropping privileges (closes: #132681, #150968).
+    - Since PAM session modules are run as root, we can turn pam_limits back
+      on by default, and it no longer spits out "Operation not permitted" to
+      syslog (closes: #171673).
+    - Password expiry works again (closes: #153235).
+    - 'ssh -q' suppresses login banner (closes: #134589).
+    - sshd doesn't lie to PAM about invalid usernames (closes: #157078).
+    - ssh-add prints key comment on each prompt (closes: #181869).
+    - Punctuation formatting fixed in man pages (closes: #191131).
+    - EnableSSHKeysign documented in ssh_config(5) (closes: #224457).
+  * Add 'UsePAM yes' to /etc/ssh/sshd_config on upgrade from versions older
+    than this, to maintain the standard Debian sshd configuration.
+  * Comment out PAMAuthenticationViaKbdInt and RhostsAuthentication in
+    sshd_config on upgrade. Neither option is supported any more.
+  * Privilege separation and PAM are now properly supported together, so
+    remove both debconf questions related to them and simply set it
+    unconditionally in newly generated sshd_config files (closes: #228838).
+  * ServerAliveInterval implemented upstream, so ProtocolKeepAlives is now a
+    compatibility alias. The semantics differ slightly, though; see
+    ssh_config(5) for details.
+  * Implement SSH1 support for ServerAliveInterval using SSH_MSG_IGNORE. As
+    documented in ssh_config(5), it's not as good as the SSH2 version.
+  * Remove -fno-builtin-log, -DHAVE_MMAP_ANON_SHARED, and
+    -D__FILE_OFFSET_BITS=64 compiler options, which are no longer necessary.
+  * Update config.guess and config.sub from autotools-dev 20040105.1.
+  * Darren Tucker:
+    - Reset signal status when starting pam auth thread, prevent hanging
+      during PAM keyboard-interactive authentications.
+    - Fix a non-security-critical segfault in PAM authentication.
+  * Add debconf template translations:
+    - Greek (thanks, Konstantinos Margaritis; closes: #232843).
+    - Italian (thanks, Renato Gini; closes: #234777).
+
+ -- Colin Watson <cjwatson@debian.org>  Sat,  6 Mar 2004 18:43:44 +0000
+
+openssh (1:3.6.1p2-12) unstable; urgency=low
+
+  * Update Spanish debconf template translation (thanks, Javier
+    Fernández-Sanguino Peña; closes: #228242).
+  * Add debconf template translations:
+    - Czech (thanks, Miroslav Kure; closes: #230110).
+    - Simplified Chinese (thanks, Hiei Xu; closes: #230726).
+
+ -- Colin Watson <cjwatson@debian.org>  Wed, 11 Feb 2004 09:37:57 +0000
+
+openssh (1:3.6.1p2-11) unstable; urgency=low
+
+  * Comment out pam_limits in default configuration, for now at least
+    (closes: #198254).
+  * Use invoke-rc.d (if it exists) to run the init script.
+  * Backport format string bug fix in sshconnect.c (closes: #225238).
+  * ssh-copy-id exits if ssh fails (closes: #215252).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun,  4 Jan 2004 18:59:21 +0000
+
+openssh (1:3.6.1p2-10) unstable; urgency=low
+
+  * Use --retry in init script when restarting rather than sleeping, to make
+    sure the old process is dead (thanks, Herbert Xu; closes: #212117).
+    Depend on dpkg (>= 1.9.0) for start-stop-daemon's --retry option.
+  * Update debconf template translations:
+    - Brazilian Portuguese (thanks, Andre Luis Lopes; closes: #219844).
+    - Danish (thanks, Morten Brix Pedersen; closes: #217964).
+    - Japanese (thanks, Kenshi Muto; closes: #212497).
+    - Russian (thanks, Ilgiz Kalmetev).
+    - Spanish (thanks, Carlos Valdivia Yagüe; closes: #211832).
+  * Add Dutch debconf template translation (thanks, cobaco;
+    closes: #215372).
+  * Update config.guess and config.sub from autotools-dev 20031007.1
+    (closes: #217696).
+  * Implement New World Order for PAM configuration, including
+    /etc/pam.d/common-* from /etc/pam.d/ssh (closes: #212959).
+    - To backport this release to woody, you need to set DEB_BUILD_SSH_WOODY
+      in your environment. See README.Debian.
+  * Add more commentary to /etc/pam.d/ssh.
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 16 Nov 2003 01:14:16 +0000
+
+openssh (1:3.6.1p2-9) unstable; urgency=high
+
+  * Merge even more buffer allocation fixes from upstream (CAN-2003-0682;
+    closes: #211434).
+
+ -- Colin Watson <cjwatson@debian.org>  Fri, 19 Sep 2003 10:25:25 +0100
+
+openssh (1:3.6.1p2-8) unstable; urgency=high
+
+  * Merge more buffer allocation fixes from new upstream version 3.7.1p1
+    (closes: #211324).
+
+ -- Colin Watson <cjwatson@debian.org>  Wed, 17 Sep 2003 03:07:19 +0100
+
+openssh (1:3.6.1p2-7) unstable; urgency=high
+
+  * Update debconf template translations:
+    - French (thanks, Christian Perrier; closes: #208801).
+    - Japanese (thanks, Kenshi Muto; closes: #210380).
+  * Some small improvements to the English templates courtesy of Christian
+    Perrier. I've manually unfuzzied a few translations where it was
+    obvious, on Christian's advice, but the others will have to be updated.
+  * Document how to generate an RSA1 host key (closes: #141703).
+  * Incorporate NMU fix for early buffer expansion vulnerability,
+    CAN-2003-0693 (closes: #211205). Thanks to Michael Stone.
+
+ -- Colin Watson <cjwatson@debian.org>  Tue, 16 Sep 2003 14:32:28 +0100
+
+openssh (1:3.6.1p2-6.0) unstable; urgency=high
+
+  * SECURITY: fix for CAN-2003-0693, buffer allocation error
+
+ -- Michael Stone <mstone@debian.org>  Tue, 16 Sep 2003 08:27:07 -0400
+
+openssh (1:3.6.1p2-6) unstable; urgency=medium
+
+  * Use a more CVS-friendly means of setting SSH_VERSION.
+  * Update Brazilian Portuguese debconf template translation (thanks, Andre
+    Luis Lopes; closes: #208036).
+  * Don't run 'sshd -t' in init script if the server isn't to be run
+    (closes: #197576).
+  * Fix login delay, spurious auth.log entry, and PermitRootLogin
+    information leakage due to PAM issues with upstream's recent security
+    update (thanks, Darren Tucker; closes: #99168, #192207, #193546).
+  * Policy version 3.6.1: recode this changelog to UTF-8.
+
+ -- Colin Watson <cjwatson@debian.org>  Wed,  3 Sep 2003 19:14:02 +0100
+
+openssh (1:3.6.1p2-5) unstable; urgency=low
+
+  * Disable cmsg_type check for file descriptor passing when running on
+    Linux 2.0 (closes: #150976). Remove comments about non-functional
+    privilege separation on 2.0 from ssh/privsep_ask and ssh/privsep_tell
+    debconf questions and from README.Debian, since it should all now work.
+  * Fix "defails" typo in generated sshd_config (closes: #206484).
+  * Backport upstream patch to strip trailing whitespace (including
+    newlines) from configuration directives (closes: #192079).
+
+ -- Colin Watson <cjwatson@debian.org>  Wed, 27 Aug 2003 02:19:57 +0100
+
+openssh (1:3.6.1p2-4) unstable; urgency=low
+
+  * getent can get just one key; no need to use grep (thanks, James Troup).
+  * Move /usr/local/bin to the front of the default path, following
+    /etc/login.defs (closes: #201150).
+  * Remove specifics of problematic countries from package description
+    (closes: #197040).
+  * Update Spanish debconf template translation (thanks, Carlos Valdivia
+    Yagüe; closes: #198456).
+  * Backport upstream patch to pass monitor signals through to child
+    (closes: #164797).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 27 Jul 2003 17:31:15 +0100
+
+openssh (1:3.6.1p2-3) unstable; urgency=low
+
+  * Update French debconf template translation (thanks, Christian Perrier;
+    closes: #194323).
+  * Version the adduser dependency for --no-create-home (closes: #195756).
+  * Add a version of moduli(5), namely revision 1.7 of
+    http://www.openbsd.org/cgi-bin/cvsweb/src/share/man/man5/moduli.5 with
+    '/etc/moduli' changed to '/etc/ssh/moduli' throughout (closes: #196061).
+
+ -- Colin Watson <cjwatson@debian.org>  Mon,  9 Jun 2003 02:51:35 +0100
+
+openssh (1:3.6.1p2-2) unstable; urgency=low
+
+  * Force /etc/default/ssh to be non-executable, since dpkg apparently
+    doesn't deal with permissions changes on conffiles (closes: #192966).
+  * Use debconf 0.5's seen flag rather than the deprecated isdefault.
+  * Add GPL location to copyright file.
+  * Remove debian/postinst.old.
+  * Switch to po-debconf, with some careful manual use of po2debconf to
+    ensure that the source package continues to build smoothly on woody
+    (closes: #183986).
+  * Update debconf template translations:
+    - Brazilian Portugese (thanks, Andre Luis Lopes; see #183986).
+    - Japanese (thanks, Tomohiro KUBOTA; closes: #192429).
+  * Compile with -fno-builtin-log for now, otherwise gcc-3.3 complains
+    "log.h:59: warning: conflicting types for built-in function `log'". The
+    OpenSSH log() function has been renamed in upstream CVS.
+
+ -- Colin Watson <cjwatson@debian.org>  Mon, 19 May 2003 01:52:38 +0100
+
+openssh (1:3.6.1p2-1) unstable; urgency=medium
+
+  * New upstream release, including fix for PAM user-discovery security hole
+    (closes: #191681).
+  * Fix ChallengeResponseAuthentication default in generated sshd_config
+    (closes: #106037).
+  * Put newlines after full stops in man page documentation for
+    ProtocolKeepAlives and SetupTimeOut.
+  * Policy version 3.5.9: support DEB_BUILD_OPTIONS=noopt, build
+    gnome-ssh-askpass with -g and -Wall flags.
+  * Really ask ssh/new_config debconf question before trying to fetch its
+    value (closes: #188721).
+  * On purge, remove only the files we know about in /etc/ssh rather than
+    the whole thing, and remove the directory if that leaves it empty
+    (closes: #176679).
+  * ssh has depended on debconf for some time now with no complaints, so:
+    - Simplify the postinst by relying on debconf being present. (The absent
+      case was buggy anyway.)
+    - Get rid of "if you have not installed debconf" text in README.Debian,
+      and generally update the "/usr/bin/ssh not SUID" entry.
+  * More README.Debian work:
+    - Reorganize into "UPGRADE ISSUES" and "OTHER ISSUES", in an effort to
+      make it easier for people to find the former. The upgrade issues
+      should probably be sorted by version somehow.
+    - Document X11UseLocalhost under "X11 Forwarding" (closes: #150913).
+  * Fix setting of IP flags for interactive sessions (upstream bug #541).
+
+ -- Colin Watson <cjwatson@debian.org>  Mon,  5 May 2003 17:47:40 +0100
+
+openssh (1:3.6.1p1-1) unstable; urgency=low
+
+  * New upstream release (thanks, Laurence J. Lane).
+  * debian/control: ssh-askpass-gnome is now Section: gnome, following the
+    override file.
+
+ -- Colin Watson <cjwatson@debian.org>  Wed,  2 Apr 2003 00:51:02 +0100
+
+openssh (1:3.6p1-1) unstable; urgency=low
+
+  * New upstream release.
+    - Workaround applied upstream for a bug in the interaction of glibc's
+      getaddrinfo() with the Linux 2.2 kernel (closes: #155814).
+    - As such, it should now be safe to remove --with-ipv4-default, so
+      starting sshd with -6 is no longer necessary (closes: #79861 and lots
+      of other merged bugs).
+    - ssh-copy-id prints usage when run without arguments (closes: #71376).
+    - scp exits 1 if ssh fails (closes: #138400).
+    - sshd writes to utmp's ut_addr_v6 field in IPv6 mode (closes: #167867).
+    - 'ssh-add -c' causes ssh-agent to ask the user each time a key is used
+      (closes: #109795).
+  * Install /etc/default/ssh non-executable (closes: #185537).
+
+ -- Colin Watson <cjwatson@debian.org>  Mon, 31 Mar 2003 23:00:59 +0100
+
+openssh (1:3.5p1-5) unstable; urgency=low
+
+  * Add /etc/default/ssh (closes: #161049).
+  * Run the init script under 'set -e' (closes: #175010).
+  * Change the default superuser path to include /sbin, /usr/sbin, and
+    /usr/local/sbin (closes: #128235, #151267). Using login.defs would be
+    nice, but that belongs to another package. Without a defined API to
+    retrieve its settings, parsing it is off-limits.
+  * Build ssh-askpass-gnome with GNOME 2. The source package should still
+    support building on stable with GNOME 1, using the alternate
+    libgnome-dev build-dependency (thanks, Colin Walters; closes: #167582).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun,  9 Mar 2003 20:12:10 +0000
+
+openssh (1:3.5p1-4) unstable; urgency=low
+
+  * Point rlogin and rcp alternatives at slogin and scp respectively rather
+    than ssh (closes: #121103, #151666). Fix alternative removal to match;
+    previously it was completely wrong anyway.
+  * Find out whether /etc/ssh/sshd_not_to_be_run exists and set the debconf
+    question's default using that information, rather than using debconf as
+    a registry. Other solutions may be better in the long run, but this is
+    at least correct (thanks, Matthew Woodcraft; closes: #84725).
+  * Stop using pam_lastlog, as it doesn't currently work well as a session
+    module when privilege separation is enabled; it can usually read
+    /var/log/lastlog but can't write to it. Instead, just use sshd's
+    built-in support, already enabled by default (closes: #151297, #169938).
+  * Use 'ssh-keygen -q' rather than redirecting output to /dev/null.
+  * Add a "this may take some time" warning when creating host keys on
+    installation (part of #110094).
+  * When restarting via the init script, check for sshd_not_to_be_run after
+    stopping sshd (idea from Tomas Pospisek; closes: #149850).
+  * Append /usr/sbin:/sbin to the init script's $PATH, just in case of
+    strangeness (closes: #115138).
+  * Fix a dpkg-statoverride call to redirect stdout to /dev/null, not
+    stderr.
+  * Correct copyright file typo: "orignal" -> "original" (closes: #176490).
+  * Rebuild with libssl0.9.7 (closes: #176983).
+  * We're up to policy version 3.5.6. DEB_BUILD_OPTIONS stuff still needs to
+    be looked at.
+
+ -- Colin Watson <cjwatson@debian.org>  Sat, 18 Jan 2003 01:37:23 +0000
+
+openssh (1:3.5p1-3) unstable; urgency=low
+
+  * Happy new year!
+  * Use getent rather than id to find out whether the sshd user exists
+    (closes: #150974).
+  * Remove some duplication from the postinst's ssh-keysign setuid code.
+  * Replace db_text with db_input throughout debian/config. (db_text has
+    been a compatibility wrapper since debconf 0.1.5.)
+  * Warn about PermitUserEnvironment on upgrade (closes: #167895).
+  * Use 'make install-nokeys', and disable unused debhelper commands,
+    thereby forward-porting the last pieces of Zack Weinberg's patch
+    (closes: #68341).
+  * Move the man page for gnome-ssh-askpass from the ssh package to
+    ssh-askpass-gnome (closes: #174449).
+  * Build with -DLOGIN_NO_ENDOPT, since Debian's /bin/login doesn't accept
+    '--' to terminate the list of options (closes: #171554).
+  * Add Jonathan Amery's ssh-argv0 script (closes: #111341).
+  * Update Danish debconf template (thanks, Morten Brix Pedersen;
+    closes: #174757).
+  * Document setgid ssh-agent's effect on certain environment variables in
+    README.Debian (closes: #167974).
+  * Document interoperability problems between scp and ssh.com's server in
+    README.Debian, and suggest some workarounds (closes: #174662).
+
+ -- Colin Watson <cjwatson@debian.org>  Wed,  1 Jan 2003 14:18:30 +0000
+
+openssh (1:3.5p1-2) unstable; urgency=low
+
+  * Mention in the ssh package description that it provides both ssh and
+    sshd (closes: #99680).
+  * Create a system group for ssh-agent, not a user group (closes: #167669).
+
+ -- Colin Watson <cjwatson@debian.org>  Mon,  4 Nov 2002 13:43:53 +0000
+
+openssh (1:3.5p1-1) unstable; urgency=low
+
+  * New upstream release.
+    - Fixes typo in ssh-add usage (closes: #152239).
+    - Fixes 'PermitRootLogin forced-commands-only' (closes: #166184).
+    - ~/.ssh/environment and environment= options in ~/.ssh/authorized_keys
+      are deprecated for security reasons and will eventually go away. For
+      now they can be re-enabled by setting 'PermitUserEnvironment yes' in
+      sshd_config.
+    - ssh-agent is installed setgid to prevent ptrace() attacks. The group
+      actually doesn't matter, as it drops privileges immediately, but to
+      avoid confusion the postinst creates a new 'ssh' group for it.
+  * Obsolete patches:
+    - Solar Designer's privsep+compression patch for Linux 2.2 (see
+      1:3.3p1-0.0woody1).
+    - Hostbased auth ssh-keysign backport (see 1:3.4p1-4).
+
+  * Remove duplicated phrase in ssh_config(5) (closes: #152404).
+  * Source the debconf confmodule at the top of the postrm rather than at
+    the bottom, to avoid making future non-idempotency problems worse (see
+    #151035).
+  * Debconf templates:
+    - Add Polish (thanks, Grzegorz Kusnierz).
+    - Update French (thanks, Denis Barbier; closes: #132509).
+    - Update Spanish (thanks, Carlos Valdivia Yagüe; closes: #164716).
+  * Write a man page for gnome-ssh-askpass, and link it to ssh-askpass.1 if
+    this is the selected ssh-askpass alternative (closes: #67775).
+
+ -- Colin Watson <cjwatson@debian.org>  Sat, 26 Oct 2002 19:41:51 +0100
+
+openssh (1:3.4p1-4) unstable; urgency=low
+
+  * Allow ssh-krb5 in ssh-askpass-gnome's dependencies (closes: #129532).
+  * Restore Russia to list of countries where encryption is problematic (see
+    #148951 and http://www.average.org/freecrypto/).
+  * Drop ssh-askpass-gnome's priority to optional, per the override file.
+  * Drop the PAM special case for hurd-i386 (closes: #99157).
+  * s/dile/idle/ in ssh_config(5) (closes: #118331).
+  * Note in README.Debian that you need xauth from xbase-clients on the
+    server for X11 forwarding (closes: #140269).
+  * Use correct path to upstream README in copyright file (closes: #146037).
+  * Document the units for ProtocolKeepAlives (closes: #159479).
+  * Backport upstream patch to fix hostbased auth (closes: #117114).
+  * Add -g to CFLAGS.
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 13 Oct 2002 18:58:53 +0100
+
+openssh (1:3.4p1-3) unstable; urgency=low
+
+  * Add myself to Uploaders: and begin acting as temporary maintainer, at
+    Matthew's request. (Normal service will resume in some months' time.)
+  * Add sharutils to Build-Depends (closes: #138465).
+  * Stop creating the /usr/doc/ssh symlink.
+
+  * Fix some debconf template typos (closes: #160358).
+  * Split debconf templates into one file per language.
+  * Add debconf template translations:
+    - Brazilian Portuguese (thanks, Andre Luis Lopes; closes: #106173).
+    - Danish (thanks, Claus Hindsgaul; closes: #126607).
+    - Japanese (thanks, Tomohiro KUBOTA; closes: #137427).
+    - Russian (thanks, Ilgiz Kalmetev; closes: #136610).
+    - Spanish (thanks, Carlos Valdivia Yagüe; closes: #129041).
+  * Update debconf template translations:
+    - French (thanks, Igor Genibel; closes: #151361).
+    - German (thanks, Axel Noetzold; closes: #147069).
+  * Some of these translations are fuzzy. Please send updates.
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 13 Oct 2002 14:09:57 +0100
+
+openssh (1:3.4p1-2) unstable; urgency=high
+
+  * Get a security-fixed version into unstable
+  * Also tidy README.Debian up a little
+
+ -- Matthew Vernon <matthew@debian.org>  Fri, 28 Jun 2002 17:20:59 +0100
+        
+openssh (1:3.4p1-1) testing; urgency=high
+
+  * Extend my tendrils back into this package (Closes: #150915, #151098)
+  * thanks to the security team for their work
+  * no thanks to ISS/Theo de Raadt for their handling of these bugs
+  * save old sshd_configs to sshd_config.dpkg-old when auto-generating a
+    new one
+  * tell/ask the user about PriviledgeSeparation
+  * /etc/init.d/ssh run will now create the chroot empty dir if necessary 
+  * Remove our previous statoverride on /usr/bin/ssh (only for people 
+    upgrading from a version where we'd put one in ourselves!)
+  * Stop slandering Russia, since someone asked so nicely (Closes: #148951)
+  * Reduce the sleep time in /etc/init.d/ssh during a restart
+        
+ -- Matthew Vernon <matthew@debian.org>  Fri, 28 Jun 2002 15:52:10 +0100
+        
+openssh (1:3.4p1-0.0woody1) testing-security; urgency=high
+
+  * NMU by the security team.
+  * New upstream version
+
+ -- Michael Stone <mstone@debian.org>  Wed, 26 Jun 2002 15:40:38 -0400
+
+openssh (1:3.3p1-0.0woody4) testing-security; urgency=high
+
+  * NMU by the security team.
+  * fix error when /etc/ssh/sshd_config exists on new install
+  * check that user doesn't exist before running adduser
+  * use openssl internal random unconditionally
+
+ -- Michael Stone <mstone@debian.org>  Tue, 25 Jun 2002 19:44:39 -0400
+
+openssh (1:3.3p1-0.0woody3) testing-security; urgency=high
+
+  * NMU by the security team.
+  * use correct home directory when sshd user is created
+
+ -- Michael Stone <mstone@debian.org>  Tue, 25 Jun 2002 08:59:50 -0400
+
+openssh (1:3.3p1-0.0woody2) testing-security; urgency=high
+
+  * NMU by the security team.
+  * Fix rsa1 key creation (Closes: #150949)
+  * don't fail if sshd user removal fails
+  * depends: on adduser (Closes: #150907)
+
+ -- Michael Stone <mstone@debian.org>  Tue, 25 Jun 2002 08:59:50 -0400
+
+openssh (1:3.3p1-0.0woody1) testing-security; urgency=high
+
+  * NMU by the security team.
+  * New upstream version.
+    - Enable privilege separation by default.
+  * Include patch from Solar Designer for privilege separation and
+    compression on 2.2.x kernels.
+  * Remove --disable-suid-ssh from configure.
+  * Support setuid ssh-keysign binary instead of setuid ssh client.
+  * Check sshd configuration before restarting.
+
+ -- Daniel Jacobowitz <dan@debian.org>  Mon, 24 Jun 2002 13:43:44 -0400
+
+openssh (1:3.0.2p1-9) unstable; urgency=high
+
+  * Thanks to those who NMUd
+  * The only change in this version is to debian/control - I've removed
+    the bit that says you can't export it from the US - it would look 
+    pretty daft to say this about a package in main! Also, it's now OK
+    to use crypto in France, so I've edited that comment slightly
+  * Correct a path in README.Debian too (Closes: #138634)
+
+ -- Matthew Vernon <matthew@debian.org>  Sun,  4 Apr 2002 09:52:59 +0100
+        
+openssh (1:3.0.2p1-8.3) unstable; urgency=medium
+
+  * NMU
+  * Really set urgency to medium this time (oops)
+  * Fix priority to standard per override while I'm at it
+
+ -- Aaron M. Ucko <ucko@debian.org>  Sun, 24 Mar 2002 09:00:08 -0500
+
+openssh (1:3.0.2p1-8.2) unstable; urgency=low
+
+  * NMU with maintainer's permission
+  * Prepare for upcoming ssh-nonfree transitional packages per
+    <http://lists.debian.org/debian-ssh/2002/debian-ssh-200203/msg00008.html>
+  * Urgency medium because it would really be good to get this into woody
+    before it releases
+  * Fix sections to match override file
+  * Reissued due to clash with non-US -> main move
+
+ -- Aaron M. Ucko <ucko@debian.org>  Sat, 23 Mar 2002 21:21:52 -0500
+
+openssh (1:3.0.2p1-8.1) unstable; urgency=low
+
+  * NMU
+  * Move from non-US to mani
+
+ -- LaMont Jones <lamont@debian.org>  Thu, 21 Mar 2002 09:33:50 -0700
+
+openssh (1:3.0.2p1-8) unstable; urgency=critical
+
+  * Security fix - patch from upstream (Closes: #137209, #137210)
+  * Undo the changes in the unreleased -7, since they appear to break 
+    things here. Accordingly, the code change is minimal, and I'm 
+    happy to get it into testing ASAP
+        
+ -- Matthew Vernon <matthew@debian.org>  Thu,  7 Mar 2002 14:25:23 +0000
+
+openssh (1:3.0.2p1-7) unstable; urgency=high
+
+  * Build to support IPv6 and IPv4 by default again
+
+ -- Matthew Vernon <matthew@debian.org>  Sat,  2 Mar 2002 00:25:05 +0000
+        
+openssh (1:3.0.2p1-6) unstable; urgency=high
+
+  * Correct error in the clean target (Closes: #130868)
+
+ -- Matthew Vernon <matthew@debian.org>  Sat, 26 Jan 2002 00:32:00 +0000
+
+openssh (1:3.0.2p1-5) unstable; urgency=medium
+
+  * Include the Debian version in our identification, to make it easier to
+    audit networks for patched versions in future
+
+ -- Matthew Vernon <matthew@debian.org>  Mon, 21 Jan 2002 17:16:10 +0000
+        
+openssh (1:3.0.2p1-4) unstable; urgency=medium
+
+  * If we're asked to not run sshd, stop any running sshd's first 
+    (Closes: #129327)
+
+ -- Matthew Vernon <matthew@debian.org>  Wed, 16 Jan 2002 21:24:16 +0000
+        
+openssh (1:3.0.2p1-3) unstable; urgency=high
+
+  * Fix /etc/pam.d/ssh to not set $MAIL (Closes: #128913)
+  * Remove extra debconf suggestion (Closes: #128094)
+  * Mmm. speedy bug-fixing :-)
+
+ -- Matthew Vernon <matthew@debian.org>  Sat, 12 Jan 2002 17:23:58 +0000
+        
+openssh (1:3.0.2p1-2) unstable; urgency=high
+
+  * Fix postinst to not automatically overwrite sshd_config (!) 
+    (Closes: #127842, #127867)
+  * Add section in README.Debian about the PermitRootLogin setting
+        
+ -- Matthew Vernon <matthew@debian.org>  Sat,  5 Jan 2003 05:26:30 +0000
+        
+openssh (1:3.0.2p1-1) unstable; urgency=high
+
+  * Incorporate fix from Colin's NMU
+  * New upstream version (fixes the bug Wichert fixed) (Closes: #124035)
+  * Capitalise IETF (Closes: #125379)
+  * Refer to the correct sftp-server location (Closes: #126854, #126224)
+  * Do what we're asked re SetUID ssh (Closes: #124065, #124154, #123247)
+  * Ask people upgrading from potato if they want a new conffile 
+    (Closes: #125642)
+  * Fix a typo in postinst (Closes: #122192, #122410, #123440)
+  * Frob the default config a little (Closes: #122284, #125827, #125696,
+    #123854)
+  * Make /etc/init.d/ssh be more clear about ssh not running (Closes:
+    #123552)
+  * Fix typo in templates file (Closes: #123411)
+
+ -- Matthew Vernon <matthew@debian.org>  Fri,  4 Jan 2002 16:01:52 +0000
+        
+openssh (1:3.0.1p1-1.2) unstable; urgency=high
+
+  * Non-maintainer upload
+  * Prevent local users from passing environment variables to the login
+    process when UseLogin is enabled
+
+ -- Wichert Akkerman <wakkerma@debian.org>  Mon,  3 Dec 2001 19:34:45 +0100
+
+openssh (1:3.0.1p1-1.1) unstable; urgency=low
+
+  * Non-maintainer upload, at Matthew's request.
+  * Remove sa_restorer assignment to fix compilation on alpha, hppa, and
+    ia64 (closes: #122086).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun,  2 Dec 2001 18:54:16 +0000
+
+openssh (1:3.0.1p1-1) unstable; urgency=high
+
+  * New upstream version (Closes: #113646, #113513, #114707, #118564)
+  * Building with a libc that works (!) (Closes: #115228)
+  * Patches forward-ported are -1/-2 options for scp, the improvement to
+    'waiting for forwarded connections to terminate...'
+  * Fix /etc/init.d/ssh to stop sshd properly (Closes: #115228)
+  * /etc/ssh/sshd_config is no longer a conffile but generated in the postinst
+  * Remove suidregister leftover from postrm
+  * Mention key we are making in the postinst
+  * Default to not enable SSH protocol 1 support, since protocol 2 is
+    much safer anyway.
+  * New version of the vpn-fixes patch, from Ian Jackson
+  * New handling of -q, and added new -qq option; thanks to Jon Amery
+  * Experimental smartcard support not enabled, since I have no way of
+    testing it.
+        
+ -- Matthew Vernon <matthew@debian.org>  Thu, 28 Nov 2001 17:43:01 +0000
+        
+openssh (1:2.9p2-6) unstable; urgency=low
+
+  * check for correct file in /etc/init.d/ssh (Closes: #110876)
+  * correct location of version 2 keys in ssh.1 (Closes: #110439)
+  * call update-alternatives --quiet (Closes: #103314)
+  * hack ssh-copy-id to chmod go-w (Closes: #95551)
+  * TEMPORARY fix to provide largefile support using a -D in the cflags
+    line. long-term, upstream will patch the autoconf stuff
+    (Closes: #106809, #111849)
+  * remove /etc/rc references in ssh-keygen.1 (Closes: #68350)
+  * scp.1 patch from Adam McKenna to document -r properly (Closes: #76054)
+  * Check for files containing a newline character (Closes: #111692)
+
+ -- Matthew Vernon <matthew@debian.org>  Thu, 13 Sep 2001 16:47:36 +0100
+
+openssh (1:2.9p2-5) unstable; urgency=high
+
+  * Thanks to all the bug-fixers who helped!
+  * remove sa_restorer assignment (Closes: #102837)
+  * patch from Peter Benie to DTRT wrt X forwarding if the server refuses
+    us access (Closes: #48297)
+  * patch from upstream CVS to fix port forwarding (Closes: #107132)
+  * patch from Jonathan Amery to document ssh-keygen behaviour 
+    (Closes:#106643, #107512)
+  * patch to postinst from Jonathan Amery (Closes: #106411)
+  * patch to manpage from Jonathan Amery (Closes: #107364)
+  * patch from Matthew Vernon to make -q emit fatal errors as that is the
+    documented behaviour (Closes: #64347)
+  * patch from Ian Jackson to cause us to destroy a file when we scp it
+    onto itself, rather than dumping bits of our memory into it, which was
+    a security hole (see #51955)
+  * patch from Jonathan Amery to document lack of Kerberos support 
+    (Closes: #103726)
+  * patch from Matthew Vernon to make the 'waiting for connections to
+    terminate' message more helpful (Closes: #50308)
+
+ -- Matthew Vernon <matthew@debian.org>  Thu, 23 Aug 2001 02:14:09 +0100
+        
+openssh (1:2.9p2-4) unstable; urgency=high
+
+  * Today's build of ssh is strawberry flavoured
+  * Patch from mhp to reduce length of time sshd is stopped for (Closes: #106176)
+  * Tidy up debconf template (Closes: #106152)
+  * If called non-setuid, then setgid()'s failure should not be fatal (see
+    #105854)
+
+ -- Matthew Vernon <matthew@debian.org>  Sun, 22 Jul 2001 14:19:43 +0100
+        
+openssh (1:2.9p2-3) unstable; urgency=low
+
+  * Patch from yours truly to add -1 and -2 options to scp (Closes: #106061)
+  * Improve the IdentityFile section in the man page (Closes: #106038)
+
+ -- Matthew Vernon <matthew@debian.org>  Sat, 21 Jul 2001 14:47:27 +0100
+        
+openssh (1:2.9p2-2) unstable; urgency=low
+
+  * Document the protocol version 2 and IPV6 changes (Closes: #105845, #105868)
+  * Make PrintLastLog 'no' by default (Closes: #105893)
+        
+ -- Matthew Vernon <matthew@debian.org>  Thu, 19 Jul 2001 18:36:41 +0100
+        
+openssh (1:2.9p2-1) unstable; urgency=low
+
+  * new (several..) upstream version (Closes: #96726, #81856, #96335)
+  * Hopefully, this will close some other bugs too
+
+ -- Matthew Vernon <matthew@debian.org>  Tue, 17 Jul 2001 19:41:58 +0100
+        
+openssh (1:2.5.2p2-3) unstable; urgency=low
+
+  * Taking Over this package
+  * Patches from Robert Bihlmeyer for the Hurd (Closes: #102991)
+  * Put PermitRootLogin back to yes (Closes: #67334, #67371, #78274)
+  * Don't fiddle with conf-files any more (Closes: #69501)
+        
+ -- Matthew Vernon <matthew@debian.org>  Tue, 03 Jul 2001 02:58:13 +0100
+        
+openssh (1:2.5.2p2-2.2) unstable; urgency=low
+
+  * NMU
+  * Include Hurd compatibility patches from Robert Bihlmeyer (Closes: #76033)
+  * Patch from Richard Kettlewell for protocolkeepalives (Closes: #99273)
+  * Patch from Matthew Vernon for BannerTimeOut, batchmode, and
+    documentation for protocolkeepalives. Makes ssh more generally useful
+    for scripting uses (Closes: #82877, #99275)
+  * Set a umask, so ourpidfile isn't world-writable (closes: #100012,
+    #98286, #97391)
+
+ -- Matthew Vernon <matthew@debian.org>  Thu, 28 Jun 2001 23:15:42 +0100
+
+openssh (1:2.5.2p2-2.1) unstable; urgency=low
+ 
+  * NMU
+  * Remove duplicate Build-Depends for libssl096-dev and change it to 
+    depend on libssl-dev instaed.  Also adding in virtual | real package
+    style build-deps.  (Closes: #93793, #75228)
+  * Removing add-log entry (Closes: #79266)
+  * This was a pam bug from a while back (Closes: #86908, #88457, #86843)
+  * pam build-dep already exists (Closes: #93683)
+  * libgnome-dev build-dep already exists (Closes: #93694)
+  * No longer in non-free (Closes: #85401)
+  * Adding in fr debconf translations (Closes: #83783)
+  * Already suggests xbase-clients (Closes: #79741)
+  * No need to suggest libpam-pwdb anymore (Closes: #81658)
+  * Providing rsh-client (Closes: #79437)
+  * hurd patch was already applied (Closes: #76033)
+  * default set to no (Closes: #73682)
+  * Adding in a suggests for dnsutils (Closes: #93265)
+  * postinst bugs fixed (Closes: #88057, #88066, #88196, #88405, #88612)
+    (Closes: #88774, #88196, #89556, #90123, #90228, #90833, #87814, #85465)
+  * Adding in debconf dependency
+ 
+ -- Ivan E. Moore II <rkrusty@debian.org>  Mon, 16 Apr 2001 14:11:04 +0100
+
+openssh (1:2.5.2p2-2) unstable; urgency=high
+
+  * disable the OpenSSL version check in entropy.c
+    (closes: #93581, #93588, #93590, #93614, #93619, #93635, #93648)
+
+ -- Philip Hands <phil@uk.alcove.com>  Wed, 11 Apr 2001 20:30:04 +0100
+
+openssh (1:2.5.2p2-1) unstable; urgency=low
+
+  * New upstream release
+  * removed make-ssh-known-hosts, since ssh-keyscan does that job (closes: #86069, #87748)
+  * fix double space indent in german templates (closes: #89493)
+  * make postinst check for ssh_host_rsa_key
+  * get rid of the last of the misguided debian/rules NMU debris  :-/
+
+ -- Philip Hands <phil@hands.com>  Sat, 24 Mar 2001 20:59:33 +0000
+
+openssh (1:2.5.1p2-2) unstable; urgency=low
+
+  * rebuild with new debhelper (closes: #89558, #89536, #90225)
+  * fix broken dpkg-statoverride test in postinst
+    (closes: #89612, #90474, #90460, #89605)
+  * NMU bug fixed but not closed in last upload  (closes: #88206)
+  
+ -- Philip Hands <phil@hands.com>  Fri, 23 Mar 2001 16:11:33 +0000
+
+openssh (1:2.5.1p2-1) unstable; urgency=high
+
+  * New upstream release
+  * fix typo in postinst (closes: #88110)
+  * revert to setting PAM service name in debian/rules, backing out last
+    NMU, which also (closes: #88101)
+  * restore the pam lastlog/motd lines, lost during the NMUs, and sshd_config
+  * restore printlastlog option patch
+  * revert to using debhelper, which had been partially disabled in NMUs
+
+ -- Philip Hands <phil@hands.com>  Tue, 13 Mar 2001 01:41:34 +0000
+
+openssh (1:2.5.1p1-1.8) unstable; urgency=high
+
+  * And now the old pam-bug s/sshd/ssh in ssh.c is also fixed
+
+ -- Christian Kurz <shorty@debian.org>  Thu,  1 Mar 2001 19:48:01 +0100
+
+openssh (1:2.5.1p1-1.7) unstable; urgency=high
+
+  * And now we mark the correct binary as setuid, when a user requested
+    to install it setuid.
+
+ -- Christian Kurz <shorty@debian.org>  Thu,  1 Mar 2001 07:19:56 +0100
+
+openssh (1:2.5.1p1-1.6) unstable; urgency=high
+
+  * Fixes postinst to handle overrides that are already there. Damn, I 
+    should have noticed the bug earlier.
+
+ -- Christian Kurz <shorty@debian.org>  Wed, 28 Feb 2001 22:35:00 +0100
+
+openssh (1:2.5.1p1-1.5) unstable; urgency=high
+
+  * Rebuild ssh with pam-support.
+
+ -- Christian Kurz <shorty@debian.org>  Mon, 26 Feb 2001 21:55:51 +0100
+
+openssh (1:2.5.1p1-1.4) unstable; urgency=low
+
+  * Added Build-Depends on libssl096-dev.
+  * Fixed sshd_config file to disallow root logins again.
+
+ -- Christian Kurz <shorty@debian.org>  Sun, 25 Feb 2001 20:03:55 +0100
+
+openssh (1:2.5.1p1-1.3) unstable; urgency=low
+
+  * Fixed missing manpages for sftp.1 and ssh-keyscan.1
+  * Made package policy 3.5.2 compliant.
+
+ -- Christian Kurz <shorty@debian.org>  Sun, 25 Feb 2001 15:46:26 +0100
+
+openssh (1:2.5.1p1-1.2) unstable; urgency=low
+
+  * Added Conflict with sftp, since we now provide our own sftp-client.
+  * Added a fix for our broken dpkg-statoverride call in the 
+    2.3.0p1-13.
+  * Fixed some config pathes in the comments of sshd_config.
+  * Removed ssh-key-exchange-vulnerability-patch since it's not needed
+    anymore because upstream included the fix.
+
+ -- Christian Kurz <shorty@debian.org>  Sun, 25 Feb 2001 13:46:58 +0100
+
+openssh (1:2.5.1p1-1.1) unstable; urgency=high
+
+  * Another NMU to get the new upstream version 2.5.1p1 into
+    unstable. (Closes: #87123)
+  * Corrected postinst to mark ssh as setuid. (Closes: #86391, #85766)
+  * Key Exchange patch is already included by upstream. (Closes: #86015)
+  * Upgrading should be possible now. (Closes: #85525, #85523)
+  * Added --disable-suid-ssh as compile option, so ssh won't get installed
+    suid per default.
+  * Fixed postinst to run dpkg-statoverride only, when dpkg-statoverride
+    is available and the mode of the binary should be 4755. And also added
+    suggestion for a newer dpkg.
+    (Closes: #85734, #85741, #86876)
+  * sftp and ssh-keyscan will also be included from now on. (Closes: #79994)
+  * scp now understands spaces in filenames (Closes: #53783, #58958,
+    #66723)
+  * ssh-keygen now supports showing DSA fingerprints. (Closes: #68623)
+  * ssh doesn' t show motd anymore when switch -t is used. (Closes #69035)
+  * ssh supports the usage of other dsa keys via the ssh command line
+    options. (Closes: #81250)
+  * Documentation in sshd_config fixed. (Closes: #81088)
+  * primes file included by upstream and included now. (Closes: #82101)
+  * scp now allows dots in the username. (Closes: #82477)
+  * Spelling error in ssh-copy-id.1 corrected by upstream. (Closes: #78124)
+
+ -- Christian Kurz <shorty@debian.org>  Sun, 25 Feb 2001 10:06:08 +0100
+
+openssh (1:2.3.0p1-1.13) unstable; urgency=low
+
+  * Config should now also be fixed with this hopefully last NMU.
+
+ -- Christian Kurz <shorty@debian.org>  Sat, 10 Feb 2001 22:56:36 +0100
+
+openssh (1:2.3.0p1-1.12) unstable; urgency=high
+
+  * Added suggest for xbase-clients to control-file. (Closes #85227)
+  * Applied patch from Markus Friedl to fix a vulnerability in 
+    the rsa keyexchange.
+  * Fixed position of horizontal line. (Closes: #83613)
+  * Fixed hopefully the grep problem in the config-file. (Closes: #78802)
+  * Converted package from suidregister to dpkg-statoverride.
+
+ -- Christian Kurz <shorty@debian.org>  Fri,  9 Feb 2001 19:43:55 +0100
+
+openssh (1:2.3.0p1-1.11) unstable; urgency=medium
+
+  * Fixed some typos in the german translation of the debconf
+    template.
+
+ -- Christian Kurz <shorty@debian.org>  Wed, 24 Jan 2001 18:22:38 +0100
+
+openssh (1:2.3.0p1-1.10) unstable; urgency=medium
+
+  * Fixed double printing of motd. (Closes: #82618)
+
+ -- Christian Kurz <shorty@debian.org>  Tue, 23 Jan 2001 21:03:43 +0100
+
+openssh (1:2.3.0p1-1.9) unstable; urgency=high
+
+  * And the next NMU which includes the patch from Andrew Bartlett
+    and Markus Friedl to fix the root privileges handling of openssh.
+    (Closes: #82657)
+
+ -- Christian Kurz <shorty@debian.org>  Wed, 17 Jan 2001 22:20:54 +0100
+
+openssh (1:2.3.0p1-1.8) unstable; urgency=high
+
+  * Applied fix from Ryan Murray to allow building on other architectures
+    since the hurd patch was wrong. (Closes: #82471)
+
+ -- Christian Kurz <shorty@debian.org>  Tue, 16 Jan 2001 22:45:51 +0100
+
+openssh (1:2.3.0p1-1.7) unstable; urgency=medium
+
+  * Fixed another typo on sshd_config
+
+ -- Christian Kurz <shorty@debian.org>  Sun, 14 Jan 2001 19:01:31 +0100
+
+openssh (1:2.3.0p1-1.6) unstable; urgency=high
+
+  * Added Build-Dependency on groff (Closes: #81886)
+  * Added Build-Depencency on debhelper (Closes: #82072)
+  * Fixed entry for known_hosts in sshd_config (Closes: #82096)
+
+ -- Christian Kurz <shorty@debian.org>  Thu, 11 Jan 2001 23:08:16 +0100
+
+openssh (1:2.3.0p1-1.5) unstable; urgency=high
+
+  * Fixed now also the problem with sshd used as default ipv4 and
+    didn't use IPv6. This should be now fixed.
+
+ -- Christian Kurz <shorty@debian.org>  Thu, 11 Jan 2001 21:25:55 +0100
+
+openssh (1:2.3.0p1-1.4) unstable; urgency=high
+
+  * Fixed buggy entry in postinst.
+
+ -- Christian Kurz <shorty@debian.org>  Wed, 10 Jan 2001 23:12:16 +0100
+
+openssh (1:2.3.0p1-1.3) unstable; urgency=high
+
+  * After finishing the rewrite of the rules-file I had to notice that
+    the manpage installation was broken. This should now work again.
+
+ -- Christian Kurz <shorty@debian.org>  Wed, 10 Jan 2001 22:11:59 +0100
+
+openssh (1:2.3.0p1-1.2) unstable; urgency=high
+
+  * Fixed the screwed up build-dependency.
+  * Removed --with-ipv4-default to support ipv6.
+  * Changed makefile to use /etc/pam.d/ssh instead of /etc/pam.d/sshd.
+  * Fixed location to sftp-server in config.
+  * Since debian still relies on /etc/pam.d/ssh instead of moving to
+    /etc/pam.d/sshd, I had to hack ssh.h to get ssh to use this name.
+  * Fixed path to host key in sshd_config.
+
+ -- Christian Kurz <shorty@debian.org>  Wed, 10 Jan 2001 08:23:47 +0100
+
+openssh (1:2.3.0p1-1.1) unstable; urgency=medium
+
+  * NMU with permission of Phil Hands.
+  * New upstream release
+  * Update Build-Depends to point to new libssl096.
+  * This upstream release doesn't leak any information depending
+    on the setting of PermitRootLogin (Closes: #59933)
+  * New upstream release contains fix against forcing a client to 
+    do X/agent forwarding (Closes: #76788)
+  * Changed template to contain correct path to the documentation 
+    (Closes: #67245)
+  * Added --with-4in6 switch as compile option into debian/rules.       
+  * Added --with-ipv4-default as compile option into debian/rules. 
+    (Closes: #75037)
+  * Changed default path to also contain /usr/local/bin and 
+    /usr/X11R6/bin (Closes: #62472,#54567,#62810)
+  * Changed path to sftp-server in sshd_config to match the
+    our package (Closes: #68347)
+  * Replaced OpenBSDh with OpenBSD in the init-script.  
+  * Changed location to original source in copyright.head
+  * Changed behaviour of init-script when invoked with the option
+    restart (Closes: #68706,#72560)
+  * Added a note about -L option of scp to README.Debian        
+  * ssh won't print now the motd if invoked with -t option
+    (Closes: #59933)
+  * RFC.nroff.gz get's now converted into RFC.gz. (Closes: #63867)      
+  * Added a note about tcp-wrapper support to README.Debian 
+    (Closes: #72807,#22190)
+  * Removed two unneeded options from building process. 
+  * Added sshd.pam into debian dir and install it.
+  * Commented out unnecessary call to dh_installinfo.
+  * Added a line to sshd.pam so that limits will be paid attention
+    to (Closes: #66904)
+  * Restart Option has a Timeout of 10 seconds (Closes: 51264)
+  * scp won't override files anymore (Closes: 51955)
+  * Removed pam_lastlog module, so that the lastlog is now printed
+    only once (Closes: #71742, #68335, #69592, #71495, #77781)
+  * If password is expired, openssh now forces the user to change it.
+    (Closes: #51747)
+  * scp should now have no more problems with shell-init-files that
+    produces ouput (Closes: #56280,#59873)
+  * ssh now prints the motd correctly (Closes: #66926)  
+  * ssh upgrade should disable ssh daemon only if users has choosen
+    to do so (Closes: #67478)
+  * ssh can now be installed suid (Closes: #70879)      
+  * Modified debian/rules to support hurd.
+
+ -- Christian Kurz <shorty@debian.org>  Wed, 27 Dec 2000 20:06:57 +0100
+
+openssh (1:2.2.0p1-1.1) unstable; urgency=medium
+
+  * Non-Maintainer Upload
+  * Check for new returns in the new libc
+    (closes: #72803, #74393, #72797, #71307, #71702)
+  * Link against libssl095a (closes: #66304)
+  * Correct check for PermitRootLogin (closes: #69448)
+
+ -- Ryan Murray <rmurray@debian.org>  Wed, 18 Oct 2000 00:48:18 -0700
+
+openssh (1:2.2.0p1-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Philip Hands <phil@hands.com>  Mon, 11 Sep 2000 14:49:43 +0100
+
+openssh (1:2.1.1p4-3) unstable; urgency=low
+
+  * add rsh alternatives
+  * add -S option to scp (using Tommi Virtanen's patch) (closes: #63097)
+  * do the IPV4_DEFAULT thing properly this time
+
+ -- Philip Hands <phil@hands.com>  Fri, 11 Aug 2000 18:14:37 +0100
+
+openssh (1:2.1.1p4-2) unstable; urgency=low
+
+  * reinstate manpage .out patch from 1:1.2.3
+  * fix typo in postinst
+  * only compile ssh with IPV4_DEFAULT
+  * apply James Troup's patch to add a -o option to scp and updated manpage
+
+ -- Philip Hands <phil@hands.com>  Sun, 30 Jul 2000 00:12:49 +0100
+
+openssh (1:2.1.1p4-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Philip Hands <phil@hands.com>  Sat, 29 Jul 2000 14:46:16 +0100
+
+openssh (1:1.2.3-10) unstable; urgency=low
+
+  * add version to libpam-modules dependency, because old versions of
+    pam_motd make it impossible to log in.
+
+ -- Philip Hands <phil@hands.com>  Sat, 29 Jul 2000 13:28:22 +0100
+
+openssh (1:1.2.3-9) frozen unstable; urgency=low
+
+  * force location of /usr/bin/X11/xauth
+    (closes: #64424, #66437, #66859)  *RC*
+  * typos in config (closes: #66779, #66780)
+  * sshd_not_to_be_run could be assumed to be true, in error, if the config
+    script died in an unusual way --- I've reversed this (closes: #66335)  
+  * Apply Zack Weinberg <zack@wolery.cumb.org>'s patch to ssh-askpass-ptk
+    (closes: #65981)
+  * change default for PermitRootLogin to "no" (closes: #66406)
+
+ -- Philip Hands <phil@hands.com>  Tue, 11 Jul 2000 20:51:18 +0100
+
+openssh (1:1.2.3-8) frozen unstable; urgency=low
+
+  * get rid of Provides: rsh-server (this will mean that rstartd
+    will need to change it's depends to deal with #63948, which I'm
+    reopening)  (closes: #66257)
+    Given that this is also a trivial change, and is a reversal of a
+    change that was mistakenly made after the freeze, I think this should
+    also go into frozen.
+
+ -- Philip Hands <phil@hands.com>  Wed, 28 Jun 2000 03:26:30 +0100
+
+openssh (1:1.2.3-7) frozen unstable; urgency=low
+
+  * check if debconf is installed before calling db_stop in postinst.
+    This is required to allow ssh to be installed when debconf is not
+    wanted, which probably makes it an RC upload (hopefully the last of
+    too many).
+
+ -- Philip Hands <phil@hands.com>  Wed, 28 Jun 2000 03:19:47 +0100
+
+openssh (1:1.2.3-6) frozen unstable; urgency=low
+
+  * fixed depressing little bug involving a line wrap looking like
+    a blank line in the templates file   *RC*
+    (closes: #66090, #66078, #66083, #66182)
+
+ -- Philip Hands <phil@hands.com>  Mon, 26 Jun 2000 00:45:05 +0100
+
+openssh (1:1.2.3-5) frozen unstable; urgency=low
+
+  * add code to prevent UseLogin exploit, although I think our PAM
+    conditional code breaks UseLogin in a way that protects us from this
+    exploit anyway. ;-)  (closes: #65495)  *RC*
+  * Apply Zack Weinberg <zack@wolery.cumb.org>'s patch to fix keyboard
+    grab vulnerability in ssh-askpass-gnome (closes: #64795) *RC*
+  * stop redirection of sshd's file descriptors (introduced in 1:1.2.3-3)
+    and use db_stop in the postinst to solve that problem instead
+    (closes: #65104)
+  * add Provides: rsh-server to ssh (closes: #63948)
+  * provide config option not to run sshd
+
+ -- Philip Hands <phil@hands.com>  Mon, 12 Jun 2000 23:05:11 +0100
+
+openssh (1:1.2.3-4) frozen unstable; urgency=low
+
+  * fixes #63436 which is *RC*
+  * add 10 second pause in init.d restart (closes: #63844)
+  * get rid of noenv in PAM mail line (closes: #63856)
+  * fix host key path in make-ssh-known-hosts (closes: #63713)
+  * change wording of SUID template (closes: #62788, #63436)
+
+ -- Philip Hands <phil@hands.com>  Sat, 27 May 2000 11:18:06 +0100
+
+openssh (1:1.2.3-3) frozen unstable; urgency=low
+
+  * redirect sshd's file descriptors to /dev/null in init to
+    prevent debconf from locking up during installation 
+    ** grave bug just submited by me **
+
+ -- Philip Hands <phil@hands.com>  Thu, 20 Apr 2000 17:10:59 +0100
+
+openssh (1:1.2.3-2) frozen  unstable; urgency=low
+
+  * allow user to select SUID status of /usr/bin/ssh (closes: 62462) ** RC **
+  * suggest debconf
+  * conflict with debconf{,-tiny} (<<0.2.17) so I can clean up the preinst
+
+ -- Philip Hands <phil@hands.com>  Wed, 19 Apr 2000 17:49:15 +0100
+
+openssh (1:1.2.3-1) frozen unstable; urgency=low
+
+  * New upstream release
+  * patch sshd to create extra xauth key required for localhost
+    (closes: #49944)  *** RC ***
+  * FallbacktoRsh now defaults to ``no'' to match impression
+    given in sshd_config
+  * stop setting suid bit on ssh (closes: #58711, #58558)
+    This breaks Rhosts authentication (which nobody uses) and allows
+    the LD_PRELOAD trick to get socks working, so seems like a net benefit.
+
+ -- Philip Hands <phil@hands.com>  Thu, 13 Apr 2000 20:01:54 +0100
+
+openssh (1:1.2.2-1.4) frozen unstable; urgency=low
+
+  * Recompile for frozen, contains fix for RC bug.
+
+ -- Tommi Virtanen <tv@debian.org>  Tue, 29 Feb 2000 22:14:58 +0200
+
+openssh (1:1.2.2-1.3) unstable; urgency=low
+
+  * Integrated man page addition for PrintLastLog.
+    This bug was filed on "openssh", and I ended up
+    creating my own patch for this (closes: #59054)
+  * Improved error message when ssh_exchange_identification
+    gets EOF (closes: #58904)
+  * Fixed typo (your -> you're) in debian/preinst.
+  * Added else-clauses to config to make this upgradepath possible:
+    oldssh -> openssh preinst fails due to upgrade_to_openssh=false
+    -> ssh-nonfree -> openssh. Without these, debconf remembered
+    the old answer, config didn't force asking it, and preinst always
+    aborted (closes: #56596, #57782)
+  * Moved setting upgrade_to_openssh isdefault flag to the place
+    where preinst would abort. This means no double question to most
+    users, people who currently suffer from "can't upgrade" may need
+    to run apt-get install ssh twice. Did not do the same for 
+    use_old_init_script, as the situation is a bit different, and
+    less common (closes: #54010, #56224)
+  * Check for existance of ssh-keygen before attempting to use it in
+    preinst, added warning for non-existant ssh-keygen in config. This
+    happens when the old ssh is removed (say, due to ssh-nonfree getting
+    installed).
+
+ -- Tommi Virtanen <tv@debian.org>  Sun, 27 Feb 2000 21:36:43 +0200
+
+openssh (1:1.2.2-1.2) frozen unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Added configuration option PrintLastLog, default off due to PAM
+    (closes: #54007, #55042)
+  * ssh-askpass-{gnome,ptk} now provide ssh-askpass, making ssh's
+    Suggests: line more accurate. Also closing related bugs fixed
+    earlier, when default ssh-askpass moved to /usr/bin.
+    (closes: #52403, #54741, #50607, #52298, #50967, #51661)
+  * Patched to call vhangup, with autoconf detection and all
+    (closes: #55379)
+  * Added --with-ipv4-default workaround to a glibc bug causing
+    slow DNS lookups, as per UPGRADING. Use -6 to really use
+    IPv6 addresses. (closes: #57891, #58744, #58713, #57970)
+  * Added noenv to PAM pam_mail line. Thanks to Ben Collins.
+    (closes: #58429)
+  * Added the UPGRADING file to the package.
+  * Added frozen to the changelog line and recompiled before
+    package was installed into the archive.
+
+ -- Tommi Virtanen <tv@debian.org>  Fri, 25 Feb 2000 22:08:57 +0200
+
+openssh (1:1.2.2-1.1) frozen unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Integrated scp pipe buffer patch from Ben Collins
+    <benc@debian.org>, should now work even if reading
+    a pipe gives less than fstat st_blksize bytes. 
+    Should now work on Alpha and Sparc Linux (closes: #53697, #52071)
+  * Made ssh depend on libssl09 (>= 0.9.4-3) (closes: #51393)
+  * Integrated patch from Ben Collins <benc@debian.org>
+    to do full shadow account locking and expiration
+    checking (closes: #58165, #51747)
+
+ -- Tommi Virtanen <tv@debian.org>  Tue, 22 Feb 2000 20:46:12 +0200
+
+openssh (1:1.2.2-1) frozen unstable; urgency=medium
+
+  * New upstream release (closes: #56870, #56346)
+  * built against new libesd (closes: #56805)
+  * add  Colin Watson <cjw44@cam.ac.uk> =NULL patch
+    (closes: #49902, #54894)
+  * use socketpairs as suggested by Andrew Tridgell to eliminate rsync
+    (and other) lockups
+  * patch SSHD_PAM_SERVICE back into auth-pam.c, again :-/
+    (closes: #49902, #55872, #56959)
+  * uncoment the * line in ssh_config (closes: #56444)
+  
+  * #54894 & #49902 are release critical, so this should go in frozen
+
+ -- Philip Hands <phil@hands.com>  Wed,  9 Feb 2000 04:52:04 +0000
+
+openssh (1:1.2.1pre24-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Philip Hands <phil@hands.com>  Fri, 31 Dec 1999 02:47:24 +0000
+
+openssh (1:1.2.1pre23-1) unstable; urgency=low
+
+  * New upstream release
+  * excape ? in /etc/init.d/ssh (closes: #53269)
+
+ -- Philip Hands <phil@hands.com>  Wed, 29 Dec 1999 16:50:46 +0000
+
+openssh (1:1.2pre17-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Philip Hands <phil@hands.com>  Thu,  9 Dec 1999 16:50:40 +0000
+
+openssh (1:1.2pre16-1) unstable; urgency=low
+
+  * New upstream release
+  * upstream release (1.2pre14) (closes: #50299)
+  * make ssh depend on libwrap0 (>= 7.6-1.1) (closes: #50973, #50776)
+  * dispose of grep -q broken pipe message in config script (closes: #50855)
+  * add make-ssh-known-hosts (closes: #50660)
+  * add -i option to ssh-copy-id (closes: #50657)
+  * add check for *LK* in password, indicating a locked account
+
+ -- Philip Hands <phil@hands.com>  Wed,  8 Dec 1999 22:59:38 +0000
+
+openssh (1:1.2pre13-1) unstable; urgency=low
+
+  * New upstream release
+  * make sshd.c use SSHD_PAM_SERVICE and define it as "ssh" in debian/rules
+  * remove duplicate line in /etc/pam.d/ssh (closes: #50310)
+  * mention ssh -A option in ssh.1 & ssh_config
+  * enable forwarding to localhost in default ssh_config (closes: #50373)
+  * tweak preinst to deal with debconf being `unpacked'
+  * use --with-tcp-wrappers (closes: #49545)
+
+ -- Philip Hands <phil@hands.com>  Sat, 20 Nov 1999 14:20:04 +0000
+
+openssh (1:1.2pre11-2) unstable; urgency=low
+
+  * oops, just realised that I forgot to strip out the unpleasant
+    fiddling mentioned below (which turned not to be a fix anyway)
+
+ -- Philip Hands <phil@hands.com>  Mon, 15 Nov 1999 01:35:23 +0000
+
+openssh (1:1.2pre11-1) unstable; urgency=low
+
+  * New upstream release (closes: #49722)
+  * add 2>/dev/null to dispose of spurious message casused by grep -q
+    (closes: #49876, #49604)
+  * fix typo in debian/control (closes: #49841)
+  * Do some unpleasant fiddling with upgraded keys in the preinst, which
+    should make the keylength problem go away.   (closes: #49676)
+  * make pam_start in sshd use ``ssh'' as the service name (closes: #49956)
+  * If /etc/ssh/NOSERVER exist, stop sshd from starting (closes: #47107)
+  * apply Ben Collins <bcollins@debian.org>'s shadow patch
+  * disable lastlogin and motd printing if using pam (closes: #49957)
+  * add ssh-copy-id script and manpage
+
+ -- Philip Hands <phil@hands.com>  Fri, 12 Nov 1999 01:03:38 +0000
+
+openssh (1:1.2pre9-1) unstable; urgency=low
+
+  * New upstream release
+  * apply Chip Salzenberg <chip@valinux.com>'s SO_REUSEADDR patch
+    to channels.c, to make forwarded ports instantly reusable
+  * replace Pre-Depend: debconf with some check code in preinst
+  * make the ssh-add ssh-askpass failure message more helpful
+  * fix the ssh-agent getopts bug (closes: #49426)
+  * fixed typo on Suggests: line (closes: #49704, #49571)
+  * tidy up ssh package description (closes: #49642)
+  * make ssh suid (closes: #49635)
+  * in preinst upgrade code, ensure ssh_host_keys is mode 600 (closes: #49606)
+  * disable agent forwarding by default, for the similar reasons as
+    X forwarding (closes: #49586)
+
+ -- Philip Hands <phil@hands.com>  Tue,  9 Nov 1999 09:57:47 +0000
+
+openssh (1:1.2pre7-4) unstable; urgency=low
+
+  * predepend on debconf (>= 0.2.17) should now allow preinst questions
+
+ -- Philip Hands <phil@hands.com>  Sat,  6 Nov 1999 10:31:06 +0000
+
+openssh (1:1.2pre7-3) unstable; urgency=low
+
+  * add ssh-askpass package using Tommi Virtanen's perl-tk script
+  * add ssh-preconfig package cludge
+  * add usage hints to ssh-agent.1
+
+ -- Philip Hands <phil@hands.com>  Fri,  5 Nov 1999 00:38:33 +0000
+
+openssh (1:1.2pre7-2) unstable; urgency=low
+
+  * use pam patch from Ben Collins <bcollins@debian.org>
+  * add slogin symlink to Makefile.in
+  * change /usr/bin/login to LOGIN_PROGRAM define of /bin/login 
+  * sort out debconf usage
+  * patch from Tommi Virtanen <tv@debian.org>'s makes ssh-add use ssh-askpass
+
+ -- Philip Hands <phil@hands.com>  Thu,  4 Nov 1999 11:08:54 +0000
+
+openssh (1:1.2pre7-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Philip Hands <phil@hands.com>  Tue,  2 Nov 1999 21:02:37 +0000
+
+openssh (1:1.2.0.pre6db1-2) unstable; urgency=low
+
+  * change the binary package name to ssh (the non-free branch of ssh has
+    been renamed to ssh-nonfree)
+  * make pam file comply with Debian standards
+  * use an epoch to make sure openssh supercedes ssh-nonfree
+
+ -- Philip Hands <phil@hands.com>  Sat, 30 Oct 1999 16:26:05 +0100
+
+openssh (1.2pre6db1-1) unstable; urgency=low
+
+  * New upstream source
+  * sshd accepts logins now!
+
+ -- Dan Brosemer <odin@linuxfreak.com>  Fri, 29 Oct 1999 11:13:38 -0500
+
+openssh (1.2.0.19991028-1) unstable; urgency=low
+
+  * New upstream source
+  * Added test for -lnsl to configure script
+
+ -- Dan Brosemer <odin@linuxfreak.com>  Thu, 28 Oct 1999 18:52:09 -0500
+
+openssh (1.2.0.19991027-3) unstable; urgency=low
+
+  * Initial release
+
+ -- Dan Brosemer <odin@linuxfreak.com>  Wed, 27 Oct 1999 19:39:46 -0500
+  
+Local variables:
+mode: debian-changelog
+End:
diff --git a/debian/control b/debian/control
new file mode 100644
index 000000000..9296e079f
--- /dev/null
+++ b/debian/control
@@ -0,0 +1,112 @@
+Source: openssh
+Section: net
+Priority: standard
+Maintainer: Matthew Vernon <matthew@debian.org>
+Build-Depends: libwrap0-dev | libwrap-dev, zlib1g-dev | libz-dev, libssl-dev, libpam0g-dev | libpam-dev, libgnomeui-dev (>= 2.0.0) | libgnome-dev, groff, debhelper (>= 2), sharutils
+Standards-Version: 3.6.1
+Uploaders: Colin Watson <cjwatson@debian.org>
+
+Package: openssh-client
+Architecture: any
+Depends: ${shlibs:Depends}, ${debconf-depends}, adduser (>= 3.10), dpkg (>= 1.7.0)
+Conflicts: sftp, rsh-client (<<0.16.1-1)
+Replaces: ssh (<< 1:3.8.1p1-9)
+Suggests: ssh-askpass, xbase-clients
+Provides: rsh-client, ssh-client
+Description: Secure shell client, an rlogin/rsh/rcp replacement
+ This is the portable version of OpenSSH, a free implementation of
+ the Secure Shell protocol as specified by the IETF secsh working
+ group.
+ .
+ Ssh (Secure Shell) is a program for logging into a remote machine
+ and for executing commands on a remote machine.
+ It provides secure encrypted communications between two untrusted
+ hosts over an insecure network.  X11 connections and arbitrary TCP/IP
+ ports can also be forwarded over the secure channel.
+ It is intended as a replacement for rlogin, rsh and rcp, and can be
+ used to provide applications with a secure communication channel.
+ .
+ This package provides the ssh client.
+ .
+ --------------------------------------------------------------------
+ .
+ In some countries it may be illegal to use any encryption at all
+ without a special permit.
+
+Package: openssh-server
+Priority: optional
+Architecture: any
+Depends: ${shlibs:Depends}, ${debconf-depends}, ${pam-depends}, libpam-modules (>= 0.72-9), adduser (>= 3.9), dpkg (>= 1.9.0), openssh-client (= ${Source-Version})
+Conflicts: ssh-nonfree (<<2), ssh-socks, ssh2, sftp, rsh-client (<<0.16.1-1)
+Replaces: ssh (<< 1:3.8.1p1-9), openssh-client (<< 1:3.8.1p1-11)
+Suggests: ssh-askpass, xbase-clients
+Provides: ssh-server
+Description: Secure shell server, an rshd replacement
+ This is the portable version of OpenSSH, a free implementation of
+ the Secure Shell protocol as specified by the IETF secsh working
+ group.
+ .
+ Ssh (Secure Shell) is a program for logging into a remote machine
+ and for executing commands on a remote machine.
+ It provides secure encrypted communications between two untrusted
+ hosts over an insecure network.  X11 connections and arbitrary TCP/IP
+ ports can also be forwarded over the secure channel.
+ It is intended as a replacement for rlogin, rsh and rcp, and can be
+ used to provide applications with a secure communication channel.
+ .
+ This package provides the sshd server.
+ .
+ --------------------------------------------------------------------
+ .
+ In some countries it may be illegal to use any encryption at all
+ without a special permit.
+
+Package: ssh
+Priority: optional
+Architecture: all
+Depends: openssh-client, openssh-server
+Description: Secure shell client and server (transitional package)
+ This is a transitional package depending on both the OpenSSH client and
+ the OpenSSH server, which are now in separate packages. You may remove
+ it once the upgrade is complete and nothing depends on it.
+
+Package: ssh-askpass-gnome
+Section: gnome
+Priority: optional
+Architecture: any
+Depends: ${shlibs:Depends}, openssh-client | ssh (>= 1:1.2pre7-4) | ssh-krb5
+Replaces: ssh (<< 1:3.5p1-3)
+Provides: ssh-askpass
+Description: under X, asks user for a passphrase for ssh-add
+ This has been split out of the main ssh package, so that the ssh will
+ not need to depend upon the Gnome libraries.
+ .
+ You probably want the ssh-askpass package instead, but this is
+ provided to add to your choice and/or confusion.
+
+Package: openssh-client-udeb
+Section: debian-installer
+Priority: optional
+Architecture: any
+Depends: ${shlibs:Depends}, libnss-files-udeb
+XB-Installer-Menu-Item: 999
+Description: Secure shell client for the Debian installer
+ This is the portable version of OpenSSH, a free implementation of
+ the Secure Shell protocol as specified by the IETF secsh working
+ group.
+ .
+ This package provides the ssh client for use in debian-installer.
+
+Package: openssh-server-udeb
+Section: debian-installer
+Priority: optional
+Architecture: any
+Depends: ${shlibs:Depends}, libnss-files-udeb
+Description: Secure shell server for the Debian installer
+ This is the portable version of OpenSSH, a free implementation of
+ the Secure Shell protocol as specified by the IETF secsh working
+ group.
+ .
+ This package provides the sshd server for use in debian-installer.
+ Since it is expected to be used in specialized situations (e.g. S/390
+ installs with no console), it does not provide any configuration.
diff --git a/debian/copyright.head b/debian/copyright.head
new file mode 100644
index 000000000..31658dbdf
--- /dev/null
+++ b/debian/copyright.head
@@ -0,0 +1,47 @@
+This package was debianized by Philip Hands <phil@hands.com> on 31 Oct 1999
+(with help from  Dan Brosemer <odin@linuxfreak.com>)
+
+It was downloaded from here:
+  ftp://ftp.fu-berlin.de/unix/security/openssh/openssh-2.3.0p1.tar.gz
+
+worldwide mirrors are listed here:
+  http://www.openssh.com/ftp.html
+
+The Debian specific parts of the package are mostly taken from the
+original ssh package, which has since been renamed as ssh-nonfree.
+
+The Debian patch is distributed under the terms of the GPL, which you
+can find in /usr/share/common-licenses/GPL.
+
+In addition, as a special exception, Matthew Vernon gives permission
+to link the code of the Debian patch with any version of the OpenSSH
+code which is distributed under a license identical to that listed in
+the included Copyright file, and distribute linked combinations
+including the two.  You must obey the GNU General Public License in
+all respects for all of the code used other than OpenSSH.  If you
+modify this file, you may extend this exception to your version of the
+file, but you are not obligated to do so.  If you do not wish to do
+so, delete this exception statement from your version.
+
+The upstream source for this package is a combination of the ssh
+branch that is being maintained by the OpenBSD team (starting from
+the last version of SSH that was distributed under a free license),
+and porting work by Damien Miller <damien@ibs.com.au> to get it
+working on Linux.  Other people also contributed to this, and are
+credited in /usr/share/doc/ssh/README.
+
+Copyright:
+
+Code in helper.[ch] is Copyright Internet Business Solutions and is
+released under a X11-style license (see source file for details).
+
+(A)RC4 code in rc4.[ch] is Copyright Damien Miller. It too is under a
+X11-style license (see source file for details).
+
+make-ssh-known-hosts is Copyright Tero Kivinen <Tero.Kivinen@hut.fi>,
+and is distributed under the GPL (see source file for details).
+
+The copyright for the original SSH version follows.  It has been
+modified with [comments] to reflect the changes that the OpenBSD folks
+have made:
+
diff --git a/debian/gnome-ssh-askpass.1 b/debian/gnome-ssh-askpass.1
new file mode 100644
index 000000000..b74c410a8
--- /dev/null
+++ b/debian/gnome-ssh-askpass.1
@@ -0,0 +1,51 @@
+.TH GNOME-SSH-ASKPASS 1
+.SH NAME
+gnome\-ssh\-askpass \- prompts a user for a passphrase using GNOME
+.SH SYNOPSIS
+.B gnome\-ssh\-askpass
+.SH DESCRIPTION
+.B gnome\-ssh\-askpass
+is a GNOME-based passphrase dialog for use with OpenSSH.
+It is intended to be called by the
+.BR ssh\-add (1)
+program and not invoked directly.
+It allows
+.BR ssh\-add (1)
+to obtain a passphrase from a user, even if not connected to a terminal
+(assuming that an X display is available).
+This happens automatically in the case where
+.B ssh\-add
+is invoked from one's
+.B ~/.xsession
+or as one of the GNOME startup programs, for example.
+.PP
+In order to be called automatically by
+.BR ssh\-add ,
+.B gnome\-ssh\-askpass
+should be installed as
+.IR /usr/bin/ssh\-askpass .
+.SH "ENVIRONMENT VARIABLES"
+The following environment variables are recognized:
+.TP
+.I GNOME_SSH_ASKPASS_GRAB_SERVER
+Causes
+.B gnome\-ssh\-askpass
+to grab the X server before asking for a passphrase.
+.TP
+.I GNOME_SSH_ASKPASS_GRAB_POINTER
+Causes
+.B gnome\-ssh\-askpass
+to grab the mouse pointer using
+.IR gdk_pointer_grab ()
+before asking for a passphrase.
+.PP
+Regardless of whether either of these environment variables is set,
+.B gnome\-ssh\-askpass
+will grab the keyboard using
+.IR gdk_keyboard_grab ().
+.SH AUTHOR
+This manual page was written by Colin Watson <cjwatson@debian.org>
+for the Debian system (but may be used by others).
+It was based on that for
+.B x11\-ssh\-askpass
+by Philip Hands.
diff --git a/debian/moduli.5 b/debian/moduli.5
new file mode 100644
index 000000000..b3997658b
--- /dev/null
+++ b/debian/moduli.5
@@ -0,0 +1,152 @@
+.\" $OpenBSD: moduli.5,v 1.7 2003/03/06 20:48:35 jmc Exp $
+.\"
+.\" Copyright 1997, 2000 William Allen Simpson <wsimpson@greendragon.com>
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\"    must display the following acknowledgement:
+.\"      This product includes software designed by William Allen Simpson.
+.\" 4. The name of the author may not be used to endorse or promote products
+.\"    derived from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+.\"
+.\" Manual page, using -mandoc macros
+.\"
+.Dd July 28, 1997
+.Dt MODULI 5
+.Os
+.Sh NAME
+.Nm moduli
+.Nd system moduli file
+.Sh DESCRIPTION
+The
+.Pa /etc/ssh/moduli
+file contains the system-wide Diffie-Hellman prime moduli for
+.Xr sshd 8 .
+.Pp
+Each line in this file contains the following fields:
+Time, Type, Tests, Tries, Size, Generator, Modulus.
+The fields are separated by white space (tab or blank).
+.Pp
+.Fa Time : yyyymmddhhmmss .
+Specifies the system time that the line was appended to the file.
+The value 00000000000000 means unknown (historic).
+.\"The file is sorted in ascending order.
+.Pp
+.Fa Type : decimal .
+Specifies the internal structure of the prime modulus.
+.Pp
+.Bl -tag -width indent -offset indent -compact
+.It 0 :
+unknown;
+often learned from peer during protocol operation,
+and saved for later analysis.
+.It 1 :
+unstructured;
+a common large number.
+.It 2 :
+safe (p = 2q + 1);
+meets basic structural requirements.
+.It 3 :
+Schnorr.
+.It 4 :
+Sophie-Germaine (q = (p-1)/2);
+usually generated in the process of testing safe or strong primes.
+.It 5 :
+strong;
+useful for RSA public key generation.
+.El
+.Pp
+.Fa Tests : decimal (bit field) .
+Specifies the methods used in checking for primality.
+Usually, more than one test is used.
+.Pp
+.Bl -tag -width indent -offset indent -compact
+.It 0 :
+not tested;
+often learned from peer during protocol operation,
+and saved for later analysis.
+.It 1 :
+composite;
+failed one or more tests.
+In this case, the highest bit specifies the test that failed.
+.It 2 :
+sieve;
+checked for division by a range of smaller primes.
+.It 4 :
+Miller-Rabin.
+.It 8 :
+Jacobi.
+.It 16 :
+Elliptic Curve.
+.El
+.Pp
+.Fa Tries : decimal .
+Depends on the value of the highest valid Test bit,
+where the method specified is:
+.Pp
+.Bl -tag -width indent -offset indent -compact
+.It 0 :
+not tested
+(always zero).
+.It 1 :
+composite
+(irrelevant).
+.It 2 :
+sieve;
+number of primes sieved.
+Commonly on the order of 32,000,000.
+.It 4 :
+Miller-Rabin;
+number of M-R iterations.
+Commonly on the order of 32 to 64.
+.It 8 :
+Jacobi;
+unknown
+(always zero).
+.It 16 :
+Elliptic Curve;
+unused
+(always zero).
+.El
+.Pp
+.Fa Size : decimal .
+Specifies the number of significant bits.
+.Pp
+.Fa Generator : hex string .
+Specifies the best generator for a Diffie-Hellman exchange.
+0 = unknown or variable,
+2, 3, 5, etc.
+.Pp
+.Fa Modulus : hex string .
+The prime modulus.
+.Pp
+The file is searched for moduli that meet the appropriate
+Time, Size and Generator criteria.
+When more than one meet the criteria,
+the selection should be weighted toward newer moduli,
+without completely disqualifying older moduli.
+.Sh FILES
+.Bl -tag -width /etc/ssh/moduli -compact
+.It Pa /etc/ssh/moduli
+.El
+.Sh SEE ALSO
+.Xr sshd 8
diff --git a/debian/openssh-client-udeb.dirs b/debian/openssh-client-udeb.dirs
new file mode 100644
index 000000000..e77248175
--- /dev/null
+++ b/debian/openssh-client-udeb.dirs
@@ -0,0 +1 @@
+usr/bin
diff --git a/debian/openssh-client-udeb.isinstallable b/debian/openssh-client-udeb.isinstallable
new file mode 100644
index 000000000..7591b6245
--- /dev/null
+++ b/debian/openssh-client-udeb.isinstallable
@@ -0,0 +1,10 @@
+#! /bin/sh
+
+# This is a hack to arrange for openssh-client-udeb to show up as a
+# retrievable debian-installer component in expert mode (due to the
+# Installer-Menu-Item: control field) while not actually appearing on the
+# d-i main menu. See:
+#
+#   http://lists.debian.org/debian-boot/2004/07/msg01207.html
+
+exit 1
diff --git a/debian/openssh-client.conffiles b/debian/openssh-client.conffiles
new file mode 100644
index 000000000..70b55c8f8
--- /dev/null
+++ b/debian/openssh-client.conffiles
@@ -0,0 +1,2 @@
+/etc/ssh/ssh_config
+/etc/ssh/moduli
diff --git a/debian/openssh-client.config b/debian/openssh-client.config
new file mode 100644
index 000000000..7490526fa
--- /dev/null
+++ b/debian/openssh-client.config
@@ -0,0 +1,19 @@
+#!/bin/sh
+
+action=$1
+version=$2
+
+if [ -d /etc/ssh-nonfree ] && [ ! -d /etc/ssh ]; then
+  version=1.2.27
+  cp -a /etc/ssh-nonfree /etc/ssh
+fi
+
+# Source debconf library.
+. /usr/share/debconf/confmodule
+db_version 2.0
+
+db_input medium ssh/SUID_client || true
+
+db_go
+
+exit 0
diff --git a/debian/openssh-client.postinst b/debian/openssh-client.postinst
new file mode 100644
index 000000000..2168dc1f1
--- /dev/null
+++ b/debian/openssh-client.postinst
@@ -0,0 +1,104 @@
+#!/bin/sh -e
+
+action="$1"
+oldversion="$2"
+
+. /usr/share/debconf/confmodule
+db_version 2.0
+
+umask 022
+
+if [ "$action" != configure ]
+  then
+  exit 0
+fi
+
+
+fix_rsh_diversion() {
+# get rid of mistaken rsh diversion (circa 1.2.27-1)
+
+        if [ -L /usr/bin/rsh ] &&
+                dpkg-divert --list '/usr/bin/rsh.real/rsh' | grep -q ' ssh$' ; then
+                for cmd in rlogin  rsh rcp ; do
+                        [ -L /usr/bin/$cmd ] && rm /usr/bin/$cmd
+                        dpkg-divert --package ssh --remove --rename \
+                                --divert /usr/bin/rsh.real/$cmd /usr/bin/$cmd
+
+                        [ -L /usr/man/man1/$cmd.1.gz ] && rm /usr/man/man1/$$cmd.1.gz
+                        dpkg-divert --package ssh --remove --rename \
+                                --divert /usr/man/man1/$cmd.real.1.gz /usr/man/man1/$cmd.1.gz
+                done
+
+                rmdir /usr/bin/rsh.real
+        fi
+}
+
+create_alternatives() {
+# Create alternatives for the various r* tools.
+# Make sure we don't change existing alternatives that a user might have
+# changed, but clean up after some old alternatives that mistakenly pointed
+# rlogin and rcp to ssh.
+        update-alternatives --quiet --remove rlogin /usr/bin/ssh
+        update-alternatives --quiet --remove rcp /usr/bin/ssh
+        for cmd in rsh rlogin rcp; do
+                scmd="s${cmd#r}"
+                if ! update-alternatives --display "$cmd" | \
+                                grep -q "$scmd"; then
+                        update-alternatives --quiet --install "/usr/bin/$cmd" "$cmd" "/usr/bin/$scmd" 20 \
+                                --slave "/usr/share/man/man1/$cmd.1.gz" "$cmd.1.gz" "/usr/share/man/man1/$scmd.1.gz"
+                fi
+        done
+}
+
+set_ssh_permissions() {
+        if dpkg --compare-versions "$oldversion" lt-nl 1:3.4p1-1 ; then
+            if [ -x /usr/sbin/dpkg-statoverride ] ; then
+                if dpkg-statoverride --list /usr/bin/ssh >/dev/null; then
+                    dpkg-statoverride --remove /usr/bin/ssh >/dev/null
+                fi 
+            fi
+        fi
+
+        if [ ! -x /usr/sbin/dpkg-statoverride ] || \
+             ! dpkg-statoverride --list /usr/lib/ssh-keysign >/dev/null ; then
+                db_get ssh/SUID_client
+                if [ "$RET" = "false" ] ; then
+                        chmod 0755 /usr/lib/ssh-keysign
+                elif [ "$RET" = "true" ] ; then
+                        chmod 4755 /usr/lib/ssh-keysign
+                fi
+        fi
+}
+
+fix_ssh_group() {
+        # Try to remove non-system group mistakenly created by 1:3.5p1-1.
+        # set_ssh_agent_permissions() below will re-create it properly.
+        if getent group ssh >/dev/null; then
+                delgroup --quiet ssh || true
+        fi
+}
+
+set_ssh_agent_permissions() {
+        if ! getent group ssh >/dev/null; then
+                addgroup --system --quiet ssh
+        fi
+        if ! [ -x /usr/sbin/dpkg-statoverride ] || \
+            ! dpkg-statoverride --list /usr/bin/ssh-agent >/dev/null ; then
+                chgrp ssh /usr/bin/ssh-agent
+                chmod 2755 /usr/bin/ssh-agent
+        fi
+}
+
+
+fix_rsh_diversion
+create_alternatives
+set_ssh_permissions
+if [ "$2" = "1:3.5p1-1" ]; then
+    fix_ssh_group
+fi
+set_ssh_agent_permissions
+
+
+db_stop
+
+exit 0
diff --git a/debian/openssh-client.postrm b/debian/openssh-client.postrm
new file mode 100644
index 000000000..139fb4d12
--- /dev/null
+++ b/debian/openssh-client.postrm
@@ -0,0 +1,20 @@
+#!/bin/sh -e
+
+#DEBHELPER#
+
+if [ "$1" = "purge" ]
+then
+    # Remove all non-conffiles that ssh might create, so that we can
+    # smoothly remove /etc/ssh if and only if the user hasn't dropped some
+    # other files in there. Conffiles have already been removed at this
+    # point.
+    rm -f /etc/ssh/moduli /etc/ssh/primes
+    rm -f /etc/ssh/ssh_known_hosts /etc/ssh/ssh_known_hosts2
+    rmdir --ignore-fail-on-non-empty /etc/ssh
+fi
+
+if [ "$1" = "purge" ] ; then
+        delgroup --quiet ssh > /dev/null || true
+fi
+
+exit 0
diff --git a/debian/openssh-client.prerm b/debian/openssh-client.prerm
new file mode 100644
index 000000000..2d631cb9c
--- /dev/null
+++ b/debian/openssh-client.prerm
@@ -0,0 +1,39 @@
+#! /bin/sh
+# prerm script for ssh
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <prerm> `remove'
+#        * <old-prerm> `upgrade' <new-version>
+#        * <new-prerm> `failed-upgrade' <old-version>
+#        * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
+#        * <deconfigured's-prerm> `deconfigure' `in-favour'
+#          <package-being-installed> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see /usr/share/doc/packaging-manual/
+
+case "$1" in
+    remove|deconfigure)
+        update-alternatives --quiet --remove rsh /usr/bin/ssh
+        update-alternatives --quiet --remove rlogin /usr/bin/slogin
+        update-alternatives --quiet --remove rcp /usr/bin/scp
+        ;;
+    upgrade)
+        ;;
+    failed-upgrade)
+        ;;
+    *)
+        echo "prerm called with unknown argument \`$1'" >&2
+        exit 0
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
diff --git a/debian/openssh-client.templates.master b/debian/openssh-client.templates.master
new file mode 100644
index 000000000..2a9594c66
--- /dev/null
+++ b/debian/openssh-client.templates.master
@@ -0,0 +1,12 @@
+Template: ssh/SUID_client
+Type: boolean
+Default: true
+_Description: Do you want /usr/lib/ssh-keysign to be installed SUID root?
+ You have the option of installing the ssh-keysign helper with the SUID bit
+ set.
+ .
+ If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2
+ host-based authentication.
+ .
+ If in doubt, I suggest you install it with SUID.  If it causes problems
+ you can change your mind later by running:   dpkg-reconfigure ssh
diff --git a/debian/openssh-server-udeb.dirs b/debian/openssh-server-udeb.dirs
new file mode 100644
index 000000000..f2b0bd9da
--- /dev/null
+++ b/debian/openssh-server-udeb.dirs
@@ -0,0 +1,3 @@
+usr/bin
+usr/sbin
+var/run/sshd
diff --git a/debian/openssh-server.conffiles b/debian/openssh-server.conffiles
new file mode 100644
index 000000000..c67a8f45a
--- /dev/null
+++ b/debian/openssh-server.conffiles
@@ -0,0 +1,3 @@
+/etc/init.d/ssh
+/etc/pam.d/ssh
+/etc/default/ssh
diff --git a/debian/openssh-server.config b/debian/openssh-server.config
new file mode 100644
index 000000000..0cd0a4b8d
--- /dev/null
+++ b/debian/openssh-server.config
@@ -0,0 +1,95 @@
+#!/bin/sh 
+
+action=$1
+version=$2
+
+# Source debconf library.
+. /usr/share/debconf/confmodule
+db_version 2.0
+
+
+get_config_option() {
+        option="$1"
+
+        [ -f /etc/ssh/sshd_config ] || return
+
+        # TODO: actually only one '=' allowed after option
+        perl -ne 'print if s/^[[:space:]]*'"$option"'[[:space:]=]+//i' \
+           /etc/ssh/sshd_config 2>/dev/null
+}
+
+
+if [ -e /etc/init.d/ssh ] && ! grep -q pidfile /etc/init.d/ssh
+then
+  db_fset ssh/use_old_init_script seen false
+  db_input medium ssh/use_old_init_script || true
+  db_go
+
+  db_get ssh/use_old_init_script
+  [ "$RET" = "false" ] && exit 0
+else
+  db_set ssh/use_old_init_script true
+  db_fset ssh/use_old_init_script seen true
+fi
+
+if [ -z "$version" ] && [ ! -e /etc/ssh/sshd_config ]
+then
+  db_input medium ssh/protocol2_only || true
+fi
+
+if [ -e /etc/ssh/sshd_config ]
+then
+    if dpkg --compare-versions "$version" lt-nl 1:1.3 ; 
+    then db_input medium ssh/new_config || true
+        db_go
+        db_get ssh/new_config
+        if [ "$RET" = "true" ];
+        then db_input medium ssh/protocol2_only ||true
+        fi
+    fi
+
+    # An empty version means we're upgrading from before the package split,
+    # so check.
+    if dpkg --compare-versions "$version" lt 1:3.8.1p1-11
+    then
+        passwordauth="$(get_config_option PasswordAuthentication)"
+        crauth="$(get_config_option ChallengeResponseAuthentication)"
+        if [ "$passwordauth" = no ] && \
+           ([ -z "$crauth" ] || [ "$crauth" = yes ])
+        then
+            db_input critical ssh/disable_cr_auth || true
+        fi
+    fi
+fi 
+
+if [ -x /usr/sbin/in.telnetd ] && grep -q "^telnet\b" /etc/inetd.conf
+then
+  if ! /usr/sbin/in.telnetd -? 2>&1 | grep -q ssl 2>/dev/null
+  then 
+    db_input low ssh/insecure_telnetd || true
+  fi
+fi
+
+key=/etc/ssh/ssh_host_key
+export key
+if [ -n "$version" ] && [ -f $key ] && [ ! -x /usr/bin/ssh-keygen ] &&
+     dpkg --compare-versions "$version" lt 1.2.28
+then
+  # make sure that keys get updated to get rid of IDEA; preinst
+  # actually does the work, but if the old ssh-keygen is not found,
+  # it can't do that -- thus, we tell the user that he must create
+  # a new host key.
+  echo -en '\0\0' | 3<&0 sh -c \
+      'dd if=$key bs=1 skip=32 count=2 2>/dev/null | cmp -s - /dev/fd/3' || {
+    # this means that bytes 32&33 of the key were not both zero, in which
+    # case the key is encrypted, which we need to fix
+    db_input high ssh/encrypted_host_key_but_no_keygen || true
+  }
+fi
+
+
+db_input low ssh/forward_warning || true
+
+db_go
+
+exit 0
diff --git a/debian/openssh-server.default b/debian/openssh-server.default
new file mode 100644
index 000000000..304042224
--- /dev/null
+++ b/debian/openssh-server.default
@@ -0,0 +1,5 @@
+# Default settings for openssh-server. This file is sourced by /bin/sh from
+# /etc/init.d/ssh.
+
+# Options to pass to sshd
+SSHD_OPTS=
diff --git a/debian/openssh-server.dirs b/debian/openssh-server.dirs
new file mode 100644
index 000000000..85ee171be
--- /dev/null
+++ b/debian/openssh-server.dirs
@@ -0,0 +1,7 @@
+etc/init.d
+etc/default
+usr/lib
+usr/sbin
+usr/share/man/man5
+usr/share/man/man8
+var/run/sshd
diff --git a/debian/openssh-server.init b/debian/openssh-server.init
new file mode 100644
index 000000000..552330422
--- /dev/null
+++ b/debian/openssh-server.init
@@ -0,0 +1,74 @@
+#! /bin/sh
+set -e
+
+# /etc/init.d/ssh: start and stop the OpenBSD "secure shell(tm)" daemon
+
+test -x /usr/sbin/sshd || exit 0
+( /usr/sbin/sshd -\? 2>&1 | grep -q OpenSSH ) 2>/dev/null || exit 0
+
+if test -f /etc/default/ssh; then
+    . /etc/default/ssh
+fi
+
+check_for_no_start() {
+    # forget it if we're trying to start, and /etc/ssh/sshd_not_to_be_run exists
+    if [ -e /etc/ssh/sshd_not_to_be_run ]; then 
+        echo "OpenBSD Secure Shell server not in use (/etc/ssh/sshd_not_to_be_run)"
+        exit 0
+    fi
+}
+
+check_privsep_dir() {
+    # Create the PrivSep empty dir if necessary
+    if [ ! -d /var/run/sshd ]; then
+        mkdir /var/run/sshd
+        chmod 0755 /var/run/sshd
+    fi
+}
+
+check_config() {
+    if [ ! -e /etc/ssh/sshd_not_to_be_run ]; then
+        /usr/sbin/sshd -t || exit 1
+    fi
+}
+
+export PATH="${PATH:+$PATH:}/usr/sbin:/sbin"
+
+case "$1" in
+  start)
+        check_for_no_start
+        check_privsep_dir
+        echo -n "Starting OpenBSD Secure Shell server: sshd"
+        start-stop-daemon --start --quiet --pidfile /var/run/sshd.pid --exec /usr/sbin/sshd -- $SSHD_OPTS
+        echo "."
+        ;;
+  stop)
+        echo -n "Stopping OpenBSD Secure Shell server: sshd"
+        start-stop-daemon --stop --quiet --oknodo --pidfile /var/run/sshd.pid
+        echo "."
+        ;;
+
+  reload|force-reload)
+        check_for_no_start
+        check_config
+        echo -n "Reloading OpenBSD Secure Shell server's configuration"
+        start-stop-daemon --stop --signal 1 --quiet --oknodo --pidfile /var/run/sshd.pid --exec /usr/sbin/sshd
+        echo "."
+        ;;
+
+  restart)
+        check_config
+        echo -n "Restarting OpenBSD Secure Shell server: sshd"
+        start-stop-daemon --stop --quiet --oknodo --retry 30 --pidfile /var/run/sshd.pid
+        check_for_no_start
+        check_privsep_dir
+        start-stop-daemon --start --quiet --pidfile /var/run/sshd.pid --exec /usr/sbin/sshd -- $SSHD_OPTS
+        echo "."
+        ;;
+
+  *)
+        echo "Usage: /etc/init.d/ssh {start|stop|reload|force-reload|restart}"
+        exit 1
+esac
+
+exit 0
diff --git a/debian/openssh-server.postinst b/debian/openssh-server.postinst
new file mode 100644
index 000000000..1da6cdfc5
--- /dev/null
+++ b/debian/openssh-server.postinst
@@ -0,0 +1,311 @@
+#!/bin/sh -e
+
+action="$1"
+oldversion="$2"
+
+. /usr/share/debconf/confmodule
+db_version 2.0
+
+umask 022
+
+if [ "$action" != configure ]
+  then
+  exit 0
+fi
+
+
+check_idea_key() {
+    #check for old host_key files using IDEA, which openssh does not support
+        if [ -f /etc/ssh/ssh_host_key ] ; then
+                if ssh-keygen -p -N '' -f /etc/ssh/ssh_host_key 2>&1 | \
+                                grep -q 'unknown cipher' 2>/dev/null ; then
+      mv /etc/ssh/ssh_host_key /etc/ssh/ssh_host_key.old
+      mv /etc/ssh/ssh_host_key.pub /etc/ssh/ssh_host_key.pub.old
+  fi
+        fi
+}
+
+
+get_config_option() {
+        option="$1"
+
+        [ -f /etc/ssh/sshd_config ] || return
+
+        # TODO: actually only one '=' allowed after option
+        perl -ne 'print if s/^[[:space:]]*'"$option"'[[:space:]=]+//i' \
+           /etc/ssh/sshd_config
+}
+
+
+set_config_option() {
+        option="$1"
+        value="$2"
+
+        perl -e '
+                $option = $ARGV[0]; $value = $ARGV[1]; $done = 0;
+                while (<STDIN>) {
+                        if (s/^\s*\Q$option\E\s+.*/$option $value/) {
+                                $done = 1;
+                        }
+                        print;
+                }
+                print "\n$option $value\n" unless $done;' \
+                "$option" "$value" \
+                < /etc/ssh/sshd_config > /etc/ssh/sshd_config.dpkg-new
+        chown --reference /etc/ssh/sshd_config /etc/ssh/sshd_config.dpkg-new
+        chmod --reference /etc/ssh/sshd_config /etc/ssh/sshd_config.dpkg-new
+        mv /etc/ssh/sshd_config.dpkg-new /etc/ssh/sshd_config
+}
+
+
+host_keys_required() {
+        hostkeys="$(get_config_option HostKey)"
+        if [ "$hostkeys" ]; then
+                echo "$hostkeys"
+        else
+                # No HostKey directives at all, so the server picks some
+                # defaults depending on the setting of Protocol.
+                protocol="$(get_config_option Protocol)"
+                [ "$protocol" ] || protocol=1,2
+                if echo "$protocol" | grep 1 >/dev/null; then
+                        echo /etc/ssh/ssh_host_key
+                fi
+                if echo "$protocol" | grep 2 >/dev/null; then
+                        echo /etc/ssh/ssh_host_rsa_key
+                        echo /etc/ssh/ssh_host_dsa_key
+                fi
+        fi
+}
+
+
+create_key() {
+        msg="$1"
+        shift
+        hostkeys="$1"
+        shift
+        file="$1"
+        shift
+
+        if echo "$hostkeys" | grep -x "$file" >/dev/null && \
+           [ ! -f "$file" ] ; then
+                echo -n $msg
+                ssh-keygen -q -f "$file" -N '' "$@"
+                echo
+        fi
+}
+
+
+create_keys() {
+        hostkeys="$(host_keys_required)"
+
+        create_key "Creating SSH1 key; this may take some time ..." \
+                "$hostkeys" /etc/ssh/ssh_host_key -t rsa1
+
+        create_key "Creating SSH2 RSA key; this may take some time ..." \
+                "$hostkeys" /etc/ssh/ssh_host_rsa_key -t rsa
+        create_key "Creating SSH2 DSA key; this may take some time ..." \
+                "$hostkeys" /etc/ssh/ssh_host_dsa_key -t dsa
+}
+
+
+check_password_auth() {
+        passwordauth="$(get_config_option PasswordAuthentication)"
+        crauth="$(get_config_option ChallengeResponseAuthentication)"
+        if [ "$passwordauth" = no ] && \
+           ([ -z "$crauth" ] || [ "$crauth" = yes ]); then
+                db_get ssh/disable_cr_auth
+                if [ "$RET" = true ]; then
+                        set_config_option ChallengeResponseAuthentication no
+                fi
+        fi
+}
+
+
+create_sshdconfig() {
+        if [ -e /etc/ssh/sshd_config ] ; then
+            if dpkg --compare-versions "$oldversion" lt-nl 1:1.3 ; then
+                db_get ssh/new_config
+                if [ "$RET" = "false" ] ; then return 0; fi
+            else
+                # Upgrade sshd configuration from a sane version.
+
+                if (dpkg --compare-versions "$oldversion" lt-nl 1:3.8p1-1 && \
+                    ! grep -iq ^UsePAM /etc/ssh/sshd_config) || \
+                   grep -Eiq '^(PAMAuthenticationViaKbdInt|RhostsAuthentication)' \
+                     /etc/ssh/sshd_config ; then
+                    # Upgrade from pre-3.7: UsePAM needed to maintain standard
+                    # Debian configuration.
+                    # Note that --compare-versions is sadly not reliable enough
+                    # here due to the package split of ssh into openssh-client
+                    # and openssh-server. The extra grep for some deprecated
+                    # options should with any luck be a good enough heuristic.
+                    echo -n 'Upgrading sshd_config (old version in .dpkg-old) ...'
+                    cp -a /etc/ssh/sshd_config /etc/ssh/sshd_config.dpkg-old
+                    perl -pe 's/^(PAMAuthenticationViaKbdInt|RhostsAuthentication)\b/#$1/i' \
+                        /etc/ssh/sshd_config > /etc/ssh/sshd_config.dpkg-new
+                    echo >> /etc/ssh/sshd_config.dpkg-new
+                    echo 'UsePAM yes' >> /etc/ssh/sshd_config.dpkg-new
+                    chown --reference /etc/ssh/sshd_config \
+                                      /etc/ssh/sshd_config.dpkg-new
+                    chmod --reference /etc/ssh/sshd_config \
+                                      /etc/ssh/sshd_config.dpkg-new
+                    mv /etc/ssh/sshd_config.dpkg-new /etc/ssh/sshd_config
+                    echo
+                fi
+
+                # An empty version means we're upgrading from before the
+                # package split, so check.
+                if dpkg --compare-versions "$oldversion" lt 1:3.8.1p1-11; then
+                    check_password_auth
+                fi
+
+                return 0
+            fi
+        fi
+
+        #Preserve old sshd_config before generating a new one
+        if [ -e /etc/ssh/sshd_config ] ; then 
+            mv /etc/ssh/sshd_config /etc/ssh/sshd_config.dpkg-old
+        fi
+
+        cat <<EOF > /etc/ssh/sshd_config
+# Package generated configuration file
+# See the sshd(8) manpage for details
+
+# What ports, IPs and protocols we listen for
+Port 22
+# Use these options to restrict which interfaces/protocols sshd will bind to
+#ListenAddress ::
+#ListenAddress 0.0.0.0
+EOF
+        db_get ssh/protocol2_only
+if [ "$RET" = "false" ]; then
+                cat <<EOF >> /etc/ssh/sshd_config
+Protocol 2,1
+# HostKeys for protocol version 1
+HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+HostKey /etc/ssh/ssh_host_rsa_key
+HostKey /etc/ssh/ssh_host_dsa_key
+EOF
+else
+        cat <<EOF >> /etc/ssh/sshd_config
+Protocol 2
+# HostKeys for protocol version 2
+HostKey /etc/ssh/ssh_host_rsa_key
+HostKey /etc/ssh/ssh_host_dsa_key
+EOF
+fi
+
+        cat <<EOF >> /etc/ssh/sshd_config
+#Privilege Separation is turned on for security
+UsePrivilegeSeparation yes
+
+# Lifetime and size of ephemeral version 1 server key
+KeyRegenerationInterval 3600
+ServerKeyBits 768
+
+# Logging
+SyslogFacility AUTH
+LogLevel INFO
+
+# Authentication:
+LoginGraceTime 600
+PermitRootLogin yes
+StrictModes yes
+
+RSAAuthentication yes
+PubkeyAuthentication yes
+#AuthorizedKeysFile     %h/.ssh/authorized_keys
+
+# Don't read the user's ~/.rhosts and ~/.shosts files
+IgnoreRhosts yes
+# For this to work you will also need host keys in /etc/ssh_known_hosts
+RhostsRSAAuthentication no
+# similar for protocol version 2
+HostbasedAuthentication no
+# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
+#IgnoreUserKnownHosts yes
+
+# To enable empty passwords, change to yes (NOT RECOMMENDED)
+PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+
+# Change to yes to enable tunnelled clear text passwords
+PasswordAuthentication no
+
+
+# To change Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#AFSTokenPassing no
+#KerberosTicketCleanup no
+
+# Kerberos TGT Passing does only work with the AFS kaserver
+#KerberosTgtPassing yes
+
+X11Forwarding no
+X11DisplayOffset 10
+PrintMotd no
+PrintLastLog yes
+KeepAlive yes
+#UseLogin no
+
+#MaxStartups 10:30:60
+#Banner /etc/issue.net
+
+Subsystem       sftp    /usr/lib/sftp-server
+
+UsePAM yes
+EOF
+}
+
+fix_statoverride() {
+# Remove an erronous override for sshd (we should have overridden ssh)
+        if [ -x /usr/sbin/dpkg-statoverride ]; then
+                if dpkg-statoverride --list /usr/sbin/sshd >/dev/null ; then
+                        dpkg-statoverride --remove /usr/sbin/sshd
+                fi
+        fi
+}
+
+setup_sshd_user() {
+        if ! getent passwd sshd >/dev/null; then
+                adduser --quiet --system --no-create-home --home /var/run/sshd sshd
+        fi
+}
+
+fix_conffile_permissions() {
+        # Clean up after executable /etc/default/ssh in 1:3.5p1-5. dpkg
+        # doesn't do this for us; see bug #192981.
+        chmod 644 /etc/default/ssh
+}
+
+setup_init() {
+        if [ -x /etc/init.d/ssh ]; then
+                update-rc.d ssh defaults >/dev/null
+                if [ -x /usr/sbin/invoke-rc.d ]; then
+                        invoke-rc.d ssh restart
+                else
+                        /etc/init.d/ssh restart
+                fi
+        fi
+}
+
+
+create_sshdconfig
+check_idea_key
+create_keys
+fix_statoverride
+setup_sshd_user
+if dpkg --compare-versions "$2" lt 1:3.6.1p2-2; then
+    fix_conffile_permissions
+fi
+setup_init
+
+
+db_stop
+
+exit 0
diff --git a/debian/openssh-server.postrm b/debian/openssh-server.postrm
new file mode 100644
index 000000000..e7a437260
--- /dev/null
+++ b/debian/openssh-server.postrm
@@ -0,0 +1,27 @@
+#!/bin/sh -e
+
+#DEBHELPER#
+
+if [ "$1" = "purge" ]
+then
+    # Remove all non-conffiles that ssh might create, so that we can
+    # smoothly remove /etc/ssh if and only if the user hasn't dropped some
+    # other files in there. Conffiles have already been removed at this
+    # point.
+    rm -f /etc/ssh/ssh_host_key /etc/ssh/ssh_host_key.pub
+    rm -f /etc/ssh/ssh_host_rsa_key /etc/ssh/ssh_host_rsa_key.pub
+    rm -f /etc/ssh/ssh_host_dsa_key /etc/ssh/ssh_host_dsa_key.pub
+    rm -f /etc/ssh/sshd_config
+    rm -f /etc/ssh/sshd_not_to_be_run
+    rmdir --ignore-fail-on-non-empty /etc/ssh
+fi
+
+if [ "$1" = "purge" ] ; then
+    update-rc.d ssh remove >/dev/null
+fi
+
+if [ "$1" = "purge" ] ; then
+        deluser --quiet sshd > /dev/null || true
+fi
+
+exit 0
diff --git a/debian/openssh-server.preinst b/debian/openssh-server.preinst
new file mode 100644
index 000000000..320d4df2a
--- /dev/null
+++ b/debian/openssh-server.preinst
@@ -0,0 +1,79 @@
+#!/bin/sh -e
+
+action=$1
+version=$2
+
+if [ -d /etc/ssh-nonfree -a ! -d /etc/ssh ]; then
+  version=1.2.27
+fi
+
+if [ "$action" = upgrade -o "$action" = install ]
+then
+  # check if debconf is missing
+  if ! test -f /usr/share/debconf/confmodule
+  then
+    cat <<EOF
+
+WARNING: ssh's pre-configuration script relies on debconf to tell you
+about some problems that might prevent you from logging in if you are
+upgrading from the old, Non-free version of ssh.
+
+If this is a new installation, you don't need to worry about this.
+Just go ahead and install ssh (make sure to read .../ssh/README.Debian).
+
+If you are upgrading, but you have alternative ways of logging into
+the machine (i.e. you're sitting in front of it, or you have telnetd
+running), then you also don't need to worry too much, because you can
+fix it up afterwards if there's a problem.
+
+If you're upgrading from an older (non-free) version of ssh, and ssh
+is the only way you have to access this machine, then you should
+probably abort the installation of ssh, install debconf, and then
+retry the installation of ssh.
+
+EOF
+    echo -n "Do you want to install SSH anyway [yN]: "
+    read input
+    expr "$input" : '[Yy]' >/dev/null || exit 1
+
+    # work around for missing debconf
+    db_get() { : ; }
+    RET=true
+    if [ -d /etc/ssh-nonfree -a ! -d /etc/ssh ]; then
+      cp -a /etc/ssh-nonfree /etc/ssh
+    fi
+  else
+    # Source debconf library.
+    . /usr/share/debconf/confmodule
+    db_version 2.0
+  fi
+
+  db_get ssh/use_old_init_script
+  if [ "$RET" = "false" ]; then
+    echo "ssh config: Aborting because ssh/use_old_init_script = false" >&2
+    exit 1
+  fi
+
+  # deal with upgrading from pre-OpenSSH versions
+  key=/etc/ssh/ssh_host_key
+  export key
+  if [ -n "$version" ] && [ -x /usr/bin/ssh-keygen ] && [ -f $key ] &&
+     dpkg --compare-versions "$version" lt 1.2.28
+  then
+    # make sure that keys get updated to get rid of IDEA
+    #
+    # N.B. this only works because we've still got the old
+    # nonfree ssh-keygen at this point
+    #
+    # First, check if we need to bother
+    echo -en '\0\0' | 3<&0 sh -c \
+        'dd if=$key bs=1 skip=32 count=2 2>/dev/null | cmp -s - /dev/fd/3' || {
+      # this means that bytes 32&33 of the key were not both zero, in which
+      # case the key is encrypted, which we need to fix
+      chmod 600 $key
+      ssh-keygen -u -f $key >/dev/null
+    }
+  fi
+fi
+
+#DEBHELPER#
diff --git a/debian/openssh-server.prerm b/debian/openssh-server.prerm
new file mode 100644
index 000000000..7bc080b9d
--- /dev/null
+++ b/debian/openssh-server.prerm
@@ -0,0 +1,43 @@
+#! /bin/sh
+# prerm script for ssh
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <prerm> `remove'
+#        * <old-prerm> `upgrade' <new-version>
+#        * <new-prerm> `failed-upgrade' <old-version>
+#        * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
+#        * <deconfigured's-prerm> `deconfigure' `in-favour'
+#          <package-being-installed> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see /usr/share/doc/packaging-manual/
+
+case "$1" in
+    remove|deconfigure)
+        if [ -x /etc/init.d/ssh ]; then
+                if [ -x /usr/sbin/invoke-rc.d ]; then
+                        invoke-rc.d ssh stop
+                else
+                        /etc/init.d/ssh stop
+                fi
+        fi
+        ;;
+    upgrade)
+        ;;
+    failed-upgrade)
+        ;;
+    *)
+        echo "prerm called with unknown argument \`$1'" >&2
+        exit 0
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
diff --git a/debian/openssh-server.ssh.pam b/debian/openssh-server.ssh.pam
new file mode 100644
index 000000000..8882053df
--- /dev/null
+++ b/debian/openssh-server.ssh.pam
@@ -0,0 +1,29 @@
+# PAM configuration for the Secure Shell service
+
+# Disallow non-root logins when /etc/nologin exists.
+auth       required     pam_nologin.so
+
+# Read environment variables from /etc/environment and
+# /etc/security/pam_env.conf.
+auth       required     pam_env.so # [1]
+
+# Standard Un*x authentication.
+@include common-auth
+
+# Standard Un*x authorization.
+@include common-account
+
+# Standard Un*x session setup and teardown.
+@include common-session
+
+# Print the message of the day upon successful login.
+session    optional     pam_motd.so # [1]
+
+# Print the status of the user's mailbox upon successful login.
+session    optional     pam_mail.so standard noenv # [1]
+
+# Set up user limits from /etc/security/limits.conf.
+session    required     pam_limits.so
+
+# Standard Un*x password updating.
+@include common-password
diff --git a/debian/openssh-server.templates.master b/debian/openssh-server.templates.master
new file mode 100644
index 000000000..af4d4e9f8
--- /dev/null
+++ b/debian/openssh-server.templates.master
@@ -0,0 +1,95 @@
+Template: ssh/new_config
+Type: boolean
+Default: true
+_Description: Generate new configuration file
+ This version of OpenSSH has a considerably changed configuration file from
+ the version shipped in Debian 'Potato', which you appear to be upgrading
+ from. I can now generate you a new configuration file
+ (/etc/ssh/sshd.config), which will work with the new server version, but
+ will not contain any customisations you made with the old version.
+ .
+ Please note that this new configuration file will set the value of
+ 'PermitRootLogin' to yes (meaning that anyone knowing the root password
+ can ssh directly in as root). It is the opinion of the maintainer that
+ this is the correct default (see README.Debian for more details), but you
+ can always edit sshd_config and set it to no if you wish.
+ .
+ It is strongly recommended that you let me generate a new configuration
+ file for you.
+
+Template: ssh/protocol2_only
+Type: boolean
+Default: true
+_Description: Allow SSH protocol 2 only
+ This version of OpenSSH supports version 2 of the ssh protocol, which is
+ much more secure.  Disabling ssh 1 is encouraged, however this will slow
+ things down on low end machines and might prevent older clients from
+ connecting (the ssh client shipped with "potato" is affected).
+ .
+ Also please note that keys used for protocol 1 are different so you will
+ not be able to use them if you only allow protocol 2 connections.
+ .
+ If you later change your mind about this setting, README.Debian has
+ instructions on what to do to your sshd_config file.
+
+Template: ssh/use_old_init_script
+Type: boolean
+Default: false
+_Description: Do you want to continue (and risk killing active ssh sessions)?
+ The version of /etc/init.d/ssh that you have installed, is likely to kill
+ all running sshd instances.  If you are doing this upgrade via an ssh
+ session, that would be a Bad Thing(tm).
+ .
+ You can fix this by adding "--pidfile /var/run/sshd.pid" to the
+ start-stop-daemon line in the stop section of the file.
+
+Template: ssh/forward_warning
+Type: note
+_Description: NOTE: Forwarding of X11 and Authorization disabled by default.
+ For security reasons, the Debian version of ssh has ForwardX11 and
+ ForwardAgent set to ``off'' by default.
+ .
+ You can enable it for servers you trust, either in one of the
+ configuration files, or with the -X command line option.
+ .
+ More details can be found in /usr/share/doc/ssh/README.Debian
+
+Template: ssh/insecure_rshd
+Type: note
+_Description: Warning: rsh-server is installed --- probably not a good idea
+ having rsh-server installed undermines the security that you were probably
+ wanting to obtain by installing ssh.  I'd advise you to remove that
+ package.
+
+Template: ssh/insecure_telnetd
+Type: note
+_Description: Warning: telnetd is installed --- probably not a good idea
+ I'd advise you to either remove the telnetd package (if you don't actually
+ need to offer telnet access) or install telnetd-ssl so that there is at
+ least some chance that telnet sessions will not be sending unencrypted
+ login/password and session information over the network.
+
+Template: ssh/encrypted_host_key_but_no_keygen
+Type: note
+_Description: Warning: you must create a new host key
+ There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH
+ can not handle this host key file, and I can't find the ssh-keygen utility
+ from the old (non-free) SSH installation.
+ .
+ You will need to generate a new host key.
+
+Template: ssh/disable_cr_auth
+Type: boolean
+Default: false
+_Description: Disable challenge-response authentication?
+ Password authentication appears to be disabled in your current OpenSSH
+ server configuration. In order to prevent users from logging in using
+ passwords (perhaps using only public key authentication instead) with
+ recent versions of OpenSSH, you must disable challenge-response
+ authentication, or else ensure that your PAM configuration does not allow
+ Unix password file authentication.
+ .
+ If you disable challenge-response authentication, then users will not be
+ able to log in using passwords. If you leave it enabled (the default
+ answer), then the 'PasswordAuthentication no' option will have no useful
+ effect unless you also adjust your PAM configuration in /etc/pam.d/ssh.
diff --git a/debian/po/POTFILES.in b/debian/po/POTFILES.in
new file mode 100644
index 000000000..292dced6e
--- /dev/null
+++ b/debian/po/POTFILES.in
@@ -0,0 +1,2 @@
+[type: gettext/rfc822deb] openssh-client.templates.master
+[type: gettext/rfc822deb] openssh-server.templates.master
diff --git a/debian/po/ca.po b/debian/po/ca.po
new file mode 100644
index 000000000..633867185
--- /dev/null
+++ b/debian/po/ca.po
@@ -0,0 +1,352 @@
+# openssh (debconf) translation to Catalan.
+# Copyright (C) 2004 Free Software Foundation, Inc.
+# Aleix Badia i Bosch <abadia@ica.es>, 2004
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh_1:3.8p1-3_templates\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2004-03-05 19:46GMT\n"
+"Last-Translator: Aleix Badia i Bosch <abadia@ica.es>\n"
+"Language-Team: Catalan <debian-l10n-catalan@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "Voleu que el fitxer /usr/lib/ssh-keysign s'instal·li SUID root?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr "Podeu instal·lar l'ajudant del ssh-keysign amb el bit SUID definit."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"Si definiu l'ssh-keysign SUID podreu utilitzat l'autenticació basada en "
+"l'ordinador central del Protocol 2 de l'SSH."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"Si dubteu instal·leu-lo amb el SUID. Si us causa algun problema ho podeu "
+"modificar posteriorment executant l'ordre:  dpkg-reconfigure ssh"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Genera un fitxer de configuració nou"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Els fitxers de configuració de l'Openssh s'han modificat considerablement "
+"respecte als de Debian 'Potato', de la qual sembla que esteu actualitzant. "
+"Podeu generar un fitxer de configuració nou (/etc/sshd/sshd.config), que "
+"funcionarà amb la nova versió del servidor però no tindrà els paràmetres de "
+"configuració personalitzats de la versió antiga."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Recordeu que el valor de 'PermitRootLogin' del nou fitxer configuració serà "
+"yes (qualsevol persona que conegui la contrasenya del superadministrador "
+"podrà utilitzar l'ssh com a superadministrador). El valor predeterminat "
+"d'aquesta opció és una opinió personal del mantenidor (per a més informació "
+"vegeu el fitxer README.Debian), tot i això el podeu modificar editant el "
+"fitxer sshd_config i modificar definint com a no."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Es molt recomanable que deixeu que se us creï el nou fitxer de configuració."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "Permet únicament la versió 2 del protocol d'SSH"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"Aquesta versió de l'OpenSSH suporta la versió 2 del protocol d'ssh, aquesta "
+"versió és molt més segura. És recomanable inhabilitar la versió 1 del "
+"protocol, tot i això relantitzà el funcionament dels ordinadors més antics i "
+"no permetrà les connexions als clients antics (afectarà al client "
+"proporcionat per la \"potato\")."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"Recordeu que les claus que utilitza la versió 1 del protocol són diferents i "
+"no les podreu utilitzar si habiliteu únicament les connexions de la versió 2 "
+"del protocol."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"Si posteriorment canvieu d'opinió respecte a la configuració, podeu trobar "
+"les instruccions per modificar el fitxer sshd_config a README.Debian."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+"Esteu segur de voler continuar (tot i la possibilitat d'aturar les sessions "
+"d'ssh actives)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"La versió de l'/etc/init.d/ssh que heu instal·lat probablement aturarà les "
+"instàncies de l'sshd que s'estan executant. Si esteu realitzant "
+"l'actualització de de d'una sessió d'ssh us podria penjar la connexió."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Ho podeu arreglar afegint la línia \"--pidfile /var/run/sshd.pid\" a la "
+"línia start-stop-daemon de la secció stop del fitxer."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr ""
+"Nota: les opcions de reenviament de les X11 i autorització estan "
+"inhabilitades per defecte."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"Per raons de seguretat  i de forma predeterminada la versió d'ssh de Debian "
+"té les opcions ForwardX11 i ForwardAgent definides a \"off\"."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"Ho podeu habilitar pels servidors de confiança, ja sigui en un dels fitxers "
+"de configuració o a través de l'opció de la línia d'ordre -X."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr "Podeu trobar més informació al fitxer /usr/share/doc/ssh/README.Debian"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"Avís: el servidor rsh-server està instal·lat --- probablement no sigui una "
+"bona idea"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"si teniu instal·lat l'rsh-server perdreu la seguretat que esperaveu obtenir "
+"instal·lant l'ssh. És aconsellable suprimir el paquet."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr ""
+"Avís: el telnetd està instal·lat --- probablement no sigui una bona idea"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Es aconsellable suprimir el paquet telnetd (si no heu d'oferir accés a "
+"telnet) o torneu a instal·lar el paquet telnetd-ssl si més no per assegurar "
+"que les sessions de telnet no enviaran les informació del nom d'usuari i "
+"contrasenya sense xifrar a través de la xarxa."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "Avís: heu de crear una nova clau del servidor central"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Hi ha un fitxer antic /etc/ssh/ssh_host_key antic xifrat amb IDEA. L'OpenSSH "
+"no pot gestionar aquest fitxer de clau de l'ordinador central i no es pot "
+"trobar l'eina ssh-keygen de la instal·lació d'SSH anterior (non-free)."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "Haureu de generar una nova clau de l'ordinador central."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "S'han combinat les claus de l'ssh2 als fitxers de configuració"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "Des de la versió 3 de l'OpenSSH ja no s'utilitzaran fitxers separats per "
+#~ "les claus de l'ssh1 i ssg2. Ja no caldran els fitxer authorized_keys2 i "
+#~ "known_hosts2. Es continuaran llegint per mantenir la compatibilitat amb "
+#~ "les versions anteriors."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Voleu executar el servidor d'sshd?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "El paquet conté el client i el servidor d'ssh."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "L'sshd (servidor de l'intèrpret d'ordres segur) s'executarà, normalment, "
+#~ "per permetre l'entrada remota a través de l'ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Podeu inhabilitar l'sshd si voleu utilitzar el client d'ssh únicament per "
+#~ "connexions a l'exterior i no per acceptar connexions remotes."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "S'ha prohibit les opcions d'entorn a les claus."
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "L'OpenSSH inhabilita, per defecte i per evitar diversos atacs (per "
+#~ "exemple LD_PRELOAD), les opcions d'entorn per les claus públiques. Si "
+#~ "utilitzeu aquesta opció al fitxer authorized_keys recordeu que les claus "
+#~ "de la qüestió no funcionaran fins que no se suprimeixi l'opció."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Per tornar a habilitar l'opció definiu \"PermitUserEnvironment yes\" al "
+#~ "fitxer /etc/ssh/sshd_config al finalitzar l'actualització (recordeu la "
+#~ "nota d'avís de la pàgina del manual sshd_config(5)). "
diff --git a/debian/po/cs.po b/debian/po/cs.po
new file mode 100644
index 000000000..19cc1762a
--- /dev/null
+++ b/debian/po/cs.po
@@ -0,0 +1,395 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2004-01-28 15:10+0100\n"
+"Last-Translator: Miroslav Kure <kurem@debian.cz>\n"
+"Language-Team: Czech <provoz@debian.cz>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-2\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "Chcete /usr/lib/ssh-keysign nainstalovat jako SUID root?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr ""
+"Mù¾ete si vybrat, zda chcete nainstalovat ssh-keysign s nastaveným SUID "
+"bitem."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"Pokud nastavíte ssh-keysign SUID, mù¾ete pou¾ívat 'host-based' autentizaci "
+"protokolu verze 2."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"Pokud jste na pochybách, doporuèujeme SUID bit povolit. Pokud zaznamenáte "
+"problémy, mù¾ete nastavení zmìnit spu¹tìním:   dpkg-reconfigure ssh"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Generovat nový konfiguraèní soubor"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Tato verze OpenSSH má oproti verzi dodávané s Debianem 2.2, kterou nyní "
+"pravdìpodobnì aktualizujete, znaènì odli¹ný konfiguraèní soubor. Nyní mohu "
+"vytvoøit nový konfiguraèní soubor (/etc/ssh/sshd.config), který bude "
+"pracovat s novou verzí, ale nebude obsahovat ¾ádné úpravy, které jste "
+"provedli ve staré verzi."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"V novém konfiguraèním souboru bude parametr PermitRootLogin nastaven na "
+"hodnotu 'yes'. To znamená, ¾e se kdokoliv se znalostí rootova hesla mù¾e "
+"pøihlásit rovnou jako root. Pokud se chcete vrátit ke starému chování, staèí "
+"v sshd_config nastavit tento parametr na hodnotu 'no'. Více v README.Debian."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr "Je vøele doporuèeno nechat mì vyrobit konfiguraèní soubor."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "Povolit pouze SSH protokol verze 2"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"Tato verze OpenSSH podporuje ssh protokol ve verzi 2, který je mnohem "
+"bezpeènìj¹í. Je dobré ssh verze 1 zakázat, nicménì na slab¹ích poèítaèích se "
+"projeví zpomalení a také tím znemo¾níte pøihlá¹ení star¹ích klientù "
+"(napøíklad tìch z Debianu 2.2)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"Také si v¹imnìte, ¾e klíèe protokolu verze 1 jsou odli¹né a pokud povolíte "
+"pouze protokol verze 2, nebudete je moci pou¾ít. "
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"Pokud se pozdìji rozhodnete jinak, v README.Debian se nachází pøesný návod, "
+"jak upravit soubor sshd_config."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "Chcete pokraèovat (a riskovat ukonèení aktivních ssh spojení)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Stávající verze /etc/init.d/ssh pravdìpadobnì pozabíjí v¹echny bì¾ící "
+"instance sshd. Pokud tuto aktualizaci provádíte pøes ssh, byla by to ©patná "
+"Vìc(tm)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Mù¾ete to spravit pøidáním \"--pidfile /var/run/sshd.pid\" do sekce stop na "
+"øádek se start-stop-daemon."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr "POZNÁMKA: Autorizace a pøesmìrování X11 je standardnì vypnuto."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"Z bezpeènostních dùvodù má verze ssh v Debianu standardnì nastavené "
+"ForwardX11 a ForwardAgent na hodnotu \"off\"."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"Pro servery, kterým dùvìøujete, mù¾ete tyto parametry povolit v jednom z "
+"konfiguraèních souborù, nebo z pøíkazové øádky parametrem -X."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr "Více naleznete v /usr/share/doc/ssh/README.Debian"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Varování: je nainstalován rsh-server --- to není dobrý nápad"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"nainstalováním rsh-server si bouráte bezpeènost, kterou jste pravdìpodobnì "
+"chtìli dosáhnout instalací ssh. Doporuèujeme tento balík odstranit."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Varování: je nainstalován telnetd --- to není dobrý nápad"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Doporuèujeme buï odstranit balík telnetd (pokud telnet pøístup "
+"nepotøebujete), nebo nainstalovat telnetd-ssl, kde je alespoò nìjaká ¹ance, "
+"¾e spojení nebudou po síti zasílat neza¹ifrovaná jména/hesla/informace."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "Varování: musíte vytvoøit nový serverový klíè"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"V /etc/ssh/ssh_host_key se nachází starý klíè ¹ifrovaný algoritmem IDEA. "
+"OpenSSH neumí tento soubor zpracovat a nemohu najít utilitu ssh-keygen ze "
+"staré (nesvobodné) instalace SSH."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "Musíte vygenerovat nový serverový klíè"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "Klíèe ssh2 v konfiguraèních souborech byly spojeny"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "OpenSSH verze 3 ji¾ nepou¾ívá oddìlené soubory pro klíèe verze ssh1 a "
+#~ "ssh2. To znamená, ¾e soubory authorized_keys2 a known_hosts2 ji¾ nejsou "
+#~ "potøeba, ov¹em z dùvodù zachování zpìtné kompatibility jsou stále "
+#~ "naèítány."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Chcete spustit sshd server?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Tento balík obsahuje jak klienta ssh, tak server sshd."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Obvykle se sshd (Secure Shell Server) spou¹tí, aby se vzdálení u¾ivatelé "
+#~ "mohli pøihla¹ovat pøes ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Pokud na tomto poèítaèi chcete vyu¾ívat pouze ssh klienta pro odchozí "
+#~ "spojení, mù¾ete zde sshd zakázat."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Volby prostøedí spojené s klíèi jsou zakázány"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "Pro zamezení urèitých typù útokù (napø. LD_PRELOAD), tato verze OpenSSH "
+#~ "standardnì zabraòuje pou¾ívat volbu prostøedí u veøejných klíèù. Pokud "
+#~ "tuto volbu pou¾íváte v souboru authorized_keys, tak posti¾ené klíèe "
+#~ "nebudou fungovat, dokud jim tuto volbu nesma¾ete."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Pro znovupovolení této volby si po aktualizaci pøeètìte varování v "
+#~ "manuálové stránce sshd_config(5) a v souboru /etc/ssh/sshd_config zadejte "
+#~ "\"PermitUserEnvironment yes\"."
+
+#~ msgid "Privilege separation"
+#~ msgstr "Oddìlení privilegií"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "Oddìlení privilegií je standardnì zapnuto. Pokud se rozhodnete jej "
+#~ "vypnout, musíte do /etc/ssh/sshd_config pøidat øádek "
+#~ "\"UsePrivilegeSeparation no\"."
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "Povolit oddìlení privilegií"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "Tato verze OpenSSH obsahuje novou volbu oddìlení privilegií, èím¾ se "
+#~ "znaènì sni¾uje mno¾ství kódu, který bì¾í s právy u¾ivatele root, a tím "
+#~ "pádem zmen¹uje dopad bezpeènostních dìr v sshd."
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "Bohu¾el, oddìlení privilegií se ¹patnì sná¹í se systémem PAM. Libovolný "
+#~ "PAM session modul, který musí být spu¹tìn jako root (napø. "
+#~ "pam_mkhomedir), sel¾e a také nebude fungovat autentizace vyu¾ívající "
+#~ "klávesnici."
+
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "Proto¾e jste se rozhodli, abych vytvoøil soubor sshd_config, mù¾ete si "
+#~ "vybrat, jestli chcete povolit nebo zakázat oddìlení privilegií. Pokud si "
+#~ "nejste jistí, ¾e potøebujete pou¾ívat PAM moduly, které s touto volbou "
+#~ "nebudou fungovat, mìli byste oddìlení privilegií povolit."
diff --git a/debian/po/da.po b/debian/po/da.po
new file mode 100644
index 000000000..f2c94a14c
--- /dev/null
+++ b/debian/po/da.po
@@ -0,0 +1,307 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh 3.8.1p1\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2004-10-10 21:04+0200\n"
+"Last-Translator: Morten Brix Pedersen <morten@wtf.dk>\n"
+"Language-Team: Danish <dansk@klid.dk>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "Vil du have, at /usr/bin/ssh-keysign bliver installeret 'SUID root'?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr ""
+"Du har mulighed for at installere ssh-keysign hjælperen med SUID-flaget sat."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"Hvis du gør ssh-keysign SUID, vil du blive i stand til at benytte SSH "
+"protokol 2's værtsnavn-baserede autentifikation."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"Hvis du er i tvivl, vil jeg råde dig til at installere den med SUID. Hvis "
+"det skaber problemer, kan du ændre det tilbage igen ved at køre: dpkg-"
+"reconfigure ssh"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Opret ny opsætningsfil"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Denne version af OpenSSH har en betydeligt ændret opsætningsfil fra den "
+"version der kom med Debian 'Potato', som du ser ud til at opgradere fra. Jeg "
+"kan oprette en ny opsætningsfil (/etc/ssh/sshd.config), som vil virke med "
+"den nye server version, men det vil ikke beholde eventuelle ændringer du "
+"lavede med den gamle version."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Bemærk at den nye opsætningsfil vil sætte værdien af 'PermitRootLogin' til "
+"ja (som betyder at alle der kender roots adgangskode, kan tilgå maskinen via "
+"ssh direkte). Det er vedligeholderens mening, at det er den korrekte "
+"standard-værdi (se README.Debian for flere detaljer), men du kan altid "
+"redigere sshd_config og slå det fra, hvis du ønsker."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr "Du rådes stærkt til at lade mig oprette en ny opsætningsfil for dig."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "Tillad kun SSH protokol 2"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"Denne udgave af OpenSSH understøtter version 2 af ssh-protokollen, som er "
+"betydeligt mere sikker. Det anbefales at deaktivere version 1. Dog kan det "
+"sløve langsomme maskiner ned, og forhindre ældre klienter i at opnå "
+"forbindelse (ssh klienten der kommer med \"potato\" er en af dem)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"Du skal også bemærke at de nøgler som bliver anvendt til protokol 1 er "
+"forskellige, så du vil ikke være i stand til at bruge dem, hvis du kun "
+"tillader protokol 2 forbindelser."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"Hvis du senere ændrer din mening om denne indstilling, har README.Debian "
+"instruktioner på hvad du skal gøre ved din sshd_config fil."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "Vil du fortsætte (og risikere at afbryde aktive ssh-forbindelser)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Den udgave af /etc/init.d/ssh, du har installeret, vil sandsynligvis afbryde "
+"alle sshd-dæmoner. Det vil være en rigtigt dårlig idé, hvis du er ved at "
+"opgradere via en ssh-forbindelse."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Du kan afhjælpe dette ved at tilføje \"--pidfile /var/run/sshd.pid\" til "
+"'start-stop-daemon'-linjen i stop-afsnittet af filen."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr ""
+"BEMÆRK: Videregivelse af X11 og adgangkontrol er som standard deaktiveret."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"Af sikkerhedsgrunde har Debianudgaven af ssh sat ForwardX11 og ForwardAgent "
+"til 'off' som standard."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"Du kan aktivere dem for servere du stoler på, enten i en af "
+"opsætningsfilerne eller med kommandolinjetilvalget '-X'."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr "Flere detaljer kan findes i /usr/share/doc/ssh/README.Debian"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Advarsel: rsh-serveren er installeret --- sikkert ikke en god idé"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Den sikkerhed, du nok ønskede at opnå ved at installere ssh undermineres "
+"ved, at du har rsh-server installeret. Jeg vil råde dig til at fjerne pakken "
+"rsh-server."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Advarsel: telnetd er installeret --- sikkert ikke en god idé"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Jeg vil råde dig til enten at fjerne pakken telnetd (hvis du i virkeligheden "
+"ikke har brug for at tilbyde telnet-adgang) eller installere telnetd-ssl, så "
+"der i det mindste er en mulighed for, at telnet-sessioner ikke sender "
+"adgangskoder og sessions-oplysninger ukrypteret over netværket."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "Advarsel: du skal oprette en ny værtsnøgle"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Der ligger en gammel, IDEA-krypteret /etc/ssh/ssh_host_key. OpenSSH kan ikke "
+"håndtere en sådan værtsnøglefil, og jeg kan ikke finde værktøjet ssh-keygen "
+"fra den gamle (ikke-frie, 'non-free') SSH-installation."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "Du skal oprette en ny værtsnøgle."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr "Slå udfordrings-svar godkendelse fra?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"Adgangskodegodkendelse ser ud til at være deaktiveret i din nuværende "
+"OpenSSH server opsætning. For at forhindre brugere i at logge ind med "
+"adgangskoder (f.eks. kun offentlig nøgle godkendelse) med nyere versioner af "
+"OpenSSH, skal du deaktivere udfordrings-svar godkendelse, eller sikre at din "
+"PAM opsætning ikke itllader Unix adgangskodefil godkendelse."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Hvis du deaktiverer udfordrings-svar godkendelse, vil brugere ikke være i "
+"stand til at logge ind med adgangskoder. Hvis du lader det slået til "
+"(standard svaret), så vil 'PasswordAuthentication no' indstillingen ikke "
+"have nogen effekt, medmindre du også redigerer din PAM opsætning i /etc/pam."
+"d/ssh."
diff --git a/debian/po/de.po b/debian/po/de.po
new file mode 100644
index 000000000..0af4ea07f
--- /dev/null
+++ b/debian/po/de.po
@@ -0,0 +1,364 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2004-05-30 09:49-0200\n"
+"Last-Translator: Helge Kreutzmann <kreutzm@itp.uni-hannover.de>\n"
+"Language-Team: de <debian-l10n-german@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "Möchten Sie /usr/lib/ssh-keysign SUID-Root installieren?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr ""
+"Sie haben die Möglichkeit, den ssh-keysign-Helfer mit gesetzten SUID-Bit zu "
+"installieren."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"Falls Sie ssh-keysign SUID installieren, können Sie die Host-basierende "
+"Authentisierung von SSH-Protokoll Version 2 verwenden."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"Falls Sie unsicher sind, empfehle ich, mit SUID zu installieren. Falls es "
+"Probleme gibt, können Sie später Ihre Meinung ändern, indem Sie dpkg-"
+"reconfigure ssh aufrufen."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Erzeuge eine neue Konfigurationsdatei"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Diese Version von OpenSSH hat eine deutlich geänderte Konfigurationsdatei "
+"von der in 'Potato' ausgelieferten Version, von der Sie anscheinend "
+"aktualisieren. Ich kann nun eine neue Konfigurationsdatei (/etc/ssh/sshd."
+"config) erzeugen, die mit der neuen Server-Version zusammenarbeitet, aber "
+"keine Anpassung aus der alten Version enthält."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Bitte beachten Sie, daß die neue Konfigurationsdatei 'PermitRootLogin' "
+"aufyes setzt (was bedeutet, daß jeder, der das Root-Paßwort kennt, sich "
+"direkt per ssh als root anmelden kann). Es ist die Meinung des Betreuers, "
+"daß dies die richtige Standardeinstellung ist (bitte lesen Sie README.Debian "
+"für weitergehende Informationen), aber Sie können jederzeit sshd_config "
+"editieren und dies auf no setzen, falls Sie dies wünschen."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Es wird stark empfohlen, daß Sie mich eine neue Konfigurationsdatei erzeugen "
+"lassen."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "Nur SSH-Protokoll Version 2 erlauben"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"Diese Version von OpenSSH unterstützt Version 2 des SSH-Protokolls, die "
+"sicherer ist. Es wird empfohlen, Version 1 zu deaktivieren, allerdings kann "
+"dies Vorgänge auf langsamen Maschinen verzögern und alte Clients an der "
+"Verbindungsaufnahme hindern (der ssh-Client von \"potato\" ist davon "
+"betroffen)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"Bitte beachten Sie auch, daß sich die für Protokoll 1 verwendeten Schlüssel "
+"unterscheiden und Sie diese daher nicht verwenden können, wenn Sie nur "
+"Protokoll Version 2-Verbindungen erlauben."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"Falls Sie später Ihre Meinung über diese Einstellung ändern, finden Sie in "
+"README.Debian eine Anleitung was Sie mit der sshd_config-Datei machen müssen."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+"Wollen Sie weitermachen (und das Beenden der aktiven Sitzung riskieren)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Die Version von /etc/init.d/ssh, die Sie installiert haben, wird vermutlich "
+"Ihre aktiven ssh-Instanzen beenden. Wenn Sie die Aktualisierung über ssh "
+"erledigen, dann wäre das keine Gute Idee(tm)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Sie können das Problem beheben, indem sie \"--pidfile /var/run/sshd.pid\" an "
+"die start-stop-daemon Zeile in dem Abschnitt stop der Datei /etc/init.d/ssh "
+"hinzufügen."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr "HINWEIS: Weiterleiten von X11 und Berechtigungen ist abgeschaltet."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"Aus Sicherheitsgründen ist bei der Debian-Version von ssh ForwardX11 und "
+"ForwardAgent auf \"off\" gesetzt."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"Sie können dies für Server, denen Sie trauen, entweder per Eintrag in die "
+"Konfigurations-Dateien oder per Kommando-Zeilen Option -X ändern."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr "Weitere Details können Sie in /usr/share/doc/ssh/README.Debian finden."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Warnung: rsh-server ist installiert --- wahrscheinlich keine gute Idee"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"ist es eine schlechte Idee, den rsh-server installiert zu haben, da er die "
+"Sicherheit untergräbt. Wir empfehlen, das Paket zu entfernen."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Warnung: telnetd ist installiert --- wahrscheinlich keine gute Idee"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Wir empfehlen das telnetd Paket zu entfernen (falls Sie keinen telnet Zugang "
+"anbieten) oder telnetd-ssl zu installieren, so daß Sie verhindern können, "
+"daß Login und Password unverschlüsselt durch das Netz gesendet werden."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "Warnung: Sie müssen einen neuen Host-Schlüssel erzeugen"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Es existiert eine alte Variante von /etc/ssh/ssh_host_key welche per IDEA "
+"verschlüsselt ist. OpenSSH kann eine solche Host-Schlüssel-Datei nicht "
+"verarbeiten und ssh-keygen von der alten (nicht-freien) ssh Installation "
+"kann nicht gefunden werden."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "Sie müssen einen neuen Host-Schlüssel erzeugen."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "ssh2-Schlüssel in die Konfigurationsdateien eingefügt"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "Mit Version 3 verwendet OpenSSH nicht mehr seperate Dateien für ssh1 und "
+#~ "ssh2 Schlüssel. Dies bedeutet, daß authorized_keys2 und known_hosts2 "
+#~ "nicht mehr benötigt werden. Sie werden noch eingelesen, um "
+#~ "Abwärtskompatibilität zu gewähren."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Möchten Sie den sshd Server starten?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Das Paket enthält sowohl den Client als auch den sshd Server."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Normalerweise wird der sshd Secure Shell Server für Remote Logins per "
+#~ "sshgestartet."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Wenn Sie nur den ssh client nutzen wollen, um sich mit anderen Rechnern "
+#~ "zu verbinden, und sich nicht per ssh in diesen Computer einloggen wollen, "
+#~ "dann können Sie hier den sshd abschalten."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Umgebungs-Optionen für Schlüssel wurden missbilligt"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "Diese Version von OpenSSH deaktiviert standardmäßig die Umgebungsoption "
+#~ "füröffentliche Schlüssel um bestimmte Angriffe (zum Beispiel über "
+#~ "LD_PRELOAD) zu vermeiden. Falls Sie diese Option in einer authorized_keys-"
+#~ "Datei verwenden, beachten Sie, daß die in Frage kommenden Schlüssel nicht "
+#~ "funktionieren werden bis diese Option entfernt wurde."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Um diese Option wieder zu reaktivieren, setzen Sie, unter "
+#~ "Berücksichtigung der Warnung in der sshd_config(5)-Handbuchseite, "
+#~ "\"PermitUserEnvironment yes\" in /etc/ssh/sshd_config nachdem die "
+#~ "Aktualisierung erfolgt ist."
diff --git a/debian/po/el.po b/debian/po/el.po
new file mode 100644
index 000000000..5cb31d755
--- /dev/null
+++ b/debian/po/el.po
@@ -0,0 +1,422 @@
+# translation of el.po to Greek
+# translation of templates.po to Greek
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
+#    Developers do not need to manually edit POT or PO files.
+# Konstantinos Margaritis <markos@debian.org>, 2004.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: el\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2004-02-15 14:14EEST\n"
+"Last-Translator: Konstantinos Margaritis <markos@debian.org>\n"
+"Language-Team: Greek <debian-l10n-greek@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.0.2\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "Θέλετε να εγκαταστήσετε το /usr/lib/ssh-keysign ως SUID;"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr ""
+"Έχετε την επιλογή της εγκατάστασης του ε�γαλείου ssh-keysign με το bit SUID "
+"ενε�γοποιημένο."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"Αν εγκαταστήσετε το ssh-keysign SUID, θα μπο�είτε να χ�ησιμοποιήσετε την "
+"πιστοποίηση υπολογιστή (host-based authentication) του π�ωτοκόλου SSH 2."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"Αν έχετε αμφιβολίες, συνιστάται να το εγκαταστήσετε SUID.  Αν διαπιστώσετε "
+"π�οβλήματα μπο�είτε να αλλάξετε τη ��θμιση αυτή εκτελώντας:  dpkg-"
+"reconfigure ssh"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Δημιου�γία νέου α�χείου �υθμίσεων"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Αυτή η έκδοση του OpenSSH έχει σημαντικά διαφο�οποιημένο α�χείο �υθμίσεων "
+"από την έκδοση που πε�ιλαμβάνεται στη διανομή 'Potato' του Debian, από την "
+"οποία φαίνεται ότι π�αγματοποιείτε την αναβάθμιση. Στο σημείο αυτό, σας "
+"δίνεται η δυνατότητα να δημιου�γήσετε ένα νέο α�χείο �υθμίσεων (/etc/ssh/"
+"sshd_config), το οποίο χ�ησιμοποιείται από τη νέα έκδοση του δαίμονα, αλλά "
+"δεν θα πε�ιέχει οποιαδήποτε πα�αμετ�οποίηση έχετε ήδη κάνει στην παλιά "
+"έκδοση."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Σημειώστε ότι το νέο α�χείο �υθμίσεων θα καθο�ίσει την τιμή της επιλογής "
+"'PermitRootLogin' σε yes (εννοώντας ότι οποιοσδήποτε γνω�ίζει τον κωδικό "
+"π�όσβασης του root μπο�εί να συνδεθεί ως χ�ήστης root). Κατά τον συντη�ητή "
+"αυτή είναι και η σωστή π�οκαθο�ισμένη ��θμιση (δείτε το README.Debian για "
+"πε�ισσότε�ες λεπτομέ�ειες), αλλά μπο�είτε οποιαδήποτε στιγμή να αλλάξετε την "
+"τιμή σε no στο α�χείο sshd_config."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr "Συνιστάται να επιλέξετε την δημιου�γία του νέου α�χείου �υθμίσεων."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "�α επιτ�έπεται μόνο η χ�ήση του π�ωτοκόλλου SSH 2"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"Αυτή η έκδοση του OpenSSH υποστη�ίζει την έκδοση 2 του π�ωτοκόλλου ssh, που "
+"είναι πολ� πιο ασφαλής.  Συνιστάται η απενε�γοποίηση της έκδοσης 1, ωστόσο "
+"αυτό θα γίνει εις βά�ος της ταχ�τητας σε χαμηλότε�ων επιδόσεων συστήματα και "
+"θα απαγο�έψει τη σ�νδεση σε παλαιότε�α π�ογ�άμματα-πελάτες (π.χ. ο πελάτης "
+"ssh που διανέμεται με την έκδοση \"potato\")."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"Επίσης, σημειώστε ότι τα κλειδιά που χ�ησιμοποιο�νταν στο π�ωτόκολλο 1 είναι "
+"διαφο�ετικά και δε θα είναι δυνατή η χ�ήση τους αν επιτ�έψετε μόνο τις "
+"συνδέσεις με το π�ωτόκολλο 2."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"Αν αποφασίσετε διαφο�ετικά α�γότε�α για αυτή τη ��θμιση, το α�χείο README."
+"Debian έχει οδηγίες για την κατάλληλη τ�οποποίηση του α�χείου sshd_config."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+"Θέλετε να συνεχίσετε (με κίνδυνο τε�ματισμο� των ενε�γών συνεδ�ιών ssh);"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Η τ�έχουσα έκδοση του /etc/init.d/ssh που είναι εγκατεστημένη, πιθανότατα θα "
+"τε�ματίσει όλες τις συνεδ�ίες του sshd.  Αν κάνετε αυτήν την αναβάθμιση μέσω "
+"μιας συνεδ�ίας ssh, αυτό είναι μάλλον κακή ιδέα..."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Μπο�είτε να το διο�θώσετε αυτό π�οσθέτοντας \"--pidfile /var/run/sshd.pid\" "
+"στη γ�αμμή start-stop-daemon στο τμήμα \"stop\" του α�χείου."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr ""
+"ΣΗΜΕΙΩΣΗ: Η π�οώθηση των πακέτων X11 και πιστοποίησης είναι "
+"απενε�γοποιημένηεξ ο�ισμο�."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"Για λόγους ασφαλείας, η έκδοση του ssh στο Debian έχει τις επιλογές "
+"ForwardX11 και ForwardAgent ο�ισμένες σε ``off'' εξ ο�ισμο�."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"Μπο�είτε να τα ενε�γοποιήσετε για διακομιστές που εμπιστε�εστε, είτε σε ένα "
+"από τα α�χεία �υθμίσεων, είτε μέσω της επιλογής -X στη γ�αμμή εντολών."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr ""
+"Πε�ισσότε�ες λεπτομέ�ειες μπο�είτε να β�είτε στο α�χείο /usr/share/doc/ssh/"
+"README.Debian"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"Π�οσοχή: είναι ήδη εγκατεστημένος ο rsh-server --- όχι και τοσο καλή ιδέα"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Η πα�ουσία του rsh-server υπονομε�ει την ασφάλεια του συστήματος, την οποία "
+"θέλετε να εξασφαλίσετε με την εγκατάσταση του ssh. Συνιστάται η αφαί�εση "
+"αυτο� του πακέτου."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Π�οσοχή: είναι ήδη εγκατεστημένος ο telnetd --- όχι και τοσο καλή ιδέα"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Συνιστάται είτε να αφαι�έσετε το πακέτο telnetd (αν δεν είναι π�αγματικά "
+"απα�αίτητη η π�όσβαση μέσω telnet) ή να εγκαταστήσετε το πακέτο telnetd-ssl, "
+"ώστε να υπά�χει τουλάχιστον μια πιθανότητα οι συνδέσεις telnet να μην "
+"αποστέλλουν μη κ�υπτογ�αφημένες πλη�οφο�ίες κωδικών π�όσβασης και συνεδ�ιών "
+"μέσω δικτ�ου."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr ""
+"Π�οσοχή: π�έπει να δημιου�γήσετε ένα νέο κλειδί για τον υπολογιστή (host key)"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Υπά�χει ένα παλαιότε�ο κλειδί /etc/ssh/ssh_host_key, που είναι "
+"κ�υπτογ�αφημένο με τον αλγό�ιθμο IDEA. Το OpenSSH δε μπο�εί να χει�ιστεί "
+"αυτό το κλειδί και δεν έχει β�εθεί το ε�γαλείο ssh-keygen από την παλιά (μη "
+"ελε�θε�η) εγκατάσταση του SSH."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "Π�έπει να δημιου�γήσετε ένα νέο κλειδί για τον υπολογιστή (host key)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "Τα κλειδιά ssh2 συγχωνε�τηκαν στα α�χεία �υθμίσεων"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "Από την έκδοση 3 και έπειτα, το OpenSSH δεν χ�ησιμοποιεί πλέον ξεχω�ιστά "
+#~ "α�χεία για τα κλειδιά των ssh1 και ssh2. Αυτό σημαίνει ότι τα α�χεία "
+#~ "authorized_keys2 και known_hosts2 δεν είναι πλέον απα�αίτητα. Θα "
+#~ "χ�ησιμοποιο�νται μόνο για λόγους συμβατότητας."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Θέλετε να εκτελέσετε τον δαίμονα sshd;"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Το πακέτο αυτό πε�ιέχει το πελάτη ssh και το δαίμονα sshd."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Κανονικά ο δαίμονας sshd (Δαίμονας Ασφαλο�ς Κελ�φους) θα εκτελείται για "
+#~ "απομακ�υσμένες συνδέσεις μέσω ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Αν ενδιαφέ�εστε μόνο για τη χ�ήση του πελάτη ssh για εξε�χόμενες "
+#~ "συνδέσεις από αυτόν τον υπολογιστή και δεν επιθυμείτε να συνδέεστε σε "
+#~ "αυτόν μέσω ssh, τότε μπο�είτε να απενε�γοποιήσετε τον sshd στο σημείο "
+#~ "αυτό."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr ""
+#~ "Οι επιλογές πε�ιβάλλοντος κελ�φους για τα κλειδιά είναι πλέον πα�ωχημένες."
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "Αυτή η έκδοση του OpenSSH απενε�γοποιεί τις επιλογές πε�ιβάλλοντος "
+#~ "κελ�φους για δημόσια κλειδιά εξ ο�ισμο�, ώστε να αποφευχθο�ν ο�ισμένου "
+#~ "τ�που επιθέσεις (για πα�άδειγμα, LD_PRELOAD). Αν χ�ησιμοποιείτε αυτήν την "
+#~ "επιλογή σε ένα α�χείο authorized_keys, έχετε υπόψιν σας ότι τα "
+#~ "συγκεκ�ιμένα κλειδιά δεν θα χ�ησιμοποιο�νται έως ότου αφαι�εθεί η επιλογή "
+#~ "αυτή."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Για να επανενε�γοποιήσετε αυτήν την επιλογή, ο�ίστε "
+#~ "\"PermitUserEnvironment yes\" στο α�χείο /etc/ssh/sshd_config μετά το "
+#~ "τέλος της αναβάθμισης, έχοντας υπόψιν την π�οειδοποίηση στη σελίδα "
+#~ "οδηγιών του sshd_config(5)."
+
+#~ msgid "Privilege separation"
+#~ msgstr "Διαχω�ισμός Π�ονομίων"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "Ο διαχω�ισμός π�ονομίων είναι ενε�γοποιημένος εξ ο�ισμο�, οπότε αν "
+#~ "αποφασίσετε ότι θέλετε να τον απενε�γοποιήσετε, π�έπει να π�οσθέσετε την "
+#~ "��θμιση \"UsePrivilegeSeparation no\" στο α�χείο sshd_config."
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "Ενε�γοποίηση Διαχω�ισμο� Π�ονομίων"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "Αυτή η έκδοση του OpenSSH πε�ιλαμβάνει τη νέα επιλογή διαχω�ισμο� "
+#~ "π�ονομίων. Αυτό μειώνει δ�αστικά το ποσοστό των π�ογ�αμμάτων που "
+#~ "εκτελο�νται ως root, και κατά συνέπεια και τις τ��πες ασφαλείας του sshd."
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "Δυστυχώς, ο διαχω�ισμός π�ονομίων δεν συνε�γάζεται σωστά με το PAM. "
+#~ "Οποιεσδήποτε μονάδες συνεδ�ίας (session modules) του PAM που π�έπει να "
+#~ "εκτελεστο�ν ως root (pam_mkhomedir, για πα�άδειγμα) θα αποτ�χουν, και η "
+#~ "πιστοποίηση μέσω πληκτ�ολογίου στο PAM δεν θα λειτου�γεί."
+
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "Εφόσον έχετε επιλέξει να δημιου�γήθεί αυτόματα το α�χείο sshd_config, "
+#~ "μπο�είτε να επιλέξετε επίσης αν θέλετε να ενε�γοποιήσετε το διαχω�ισμό "
+#~ "π�ονομίων ή όχι. Εκτός αν γνω�ίζετε ότι χ�ειάζεστε να χ�ησιμοποιήσετε "
+#~ "χα�ακτη�ιστικά του PAM που δε συνε�γάζονται με αυτή την επιλογή, "
+#~ "συνιστάται να την ενε�γοποιήσετε."
diff --git a/debian/po/es.po b/debian/po/es.po
new file mode 100644
index 000000000..d34d1a9df
--- /dev/null
+++ b/debian/po/es.po
@@ -0,0 +1,432 @@
+#
+# openssh debconf translation to spanish
+# Copyright (C) 2003 Software in the Public Interest
+# This file is distributed under the same license as the XXXX package.
+#
+# Changes:
+# - Initial translation
+#    Carlos Valdivia Yagüe <valyag@dat,etsit.upm.es>, 2003
+# - Revision
+#    Javier Fernandez-Sanguino Peña <jfs@computer.org>, 2004
+#
+#
+#  Traductores, si no conoce el formato PO, merece la pena leer la 
+#  documentación de gettext, especialmente las secciones dedicadas a este
+#  formato, por ejemplo ejecutando:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+# Equipo de traducción al español, por favor lean antes de traducir
+# los siguientes documentos:
+# 
+# - El proyecto de traducción de Debian al español
+#   http://www.debian.org/intl/spanish/coordinacion
+#   especialmente las notas de traducción en
+#   http://www.debian.org/intl/spanish/notas
+#
+# - La guía de traducción de po's de debconf:
+#   /usr/share/doc/po-debconf/README-trans
+#   o http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh 3.6.1p2-11\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2004-01-17 17:47+0200\n"
+"Last-Translator: Javier Fernandez-Sanguino Peña <jfs@computer.org>\n"
+"Language-Team: Debian L10n Spanish <debian-l10n-spanish@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "¿Quiere instalar /usr/lib/ssh-keysign SUID root?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr ""
+"Puede instalar ssh-keysign con el bit SUID (se ejecutará con privilegios de "
+"root)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"Si hace ssh-keysign SUID, podrá usar la autenticación basada en servidor de "
+"la versión 2 del protocolo SSH."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"Si duda, se recomienda que lo instale SUID. Si le causa problemas puede "
+"cambiar de opinión posteriormente ejecutando «dpkg-reconfigure ssh»."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Generar un nuevo fichero de configuración"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Esta versión de OpenSSH tiene un fichero de configuración considerablemente "
+"diferente del incluido en Debian 'Potato', que es la versión desde la que "
+"parece estar actualizando. Puede crear automáticamente un nuevo fichero de "
+"configuración (/etc/ssh/sshd_config), que funcionará con la nueva versión "
+"del servidor, pero no incuirá las modificaciones que hiciera en la versión "
+"antigua."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Además, recuerde que este nuevo fichero de configuración dirá sí en la "
+"opción «PermitRootLogin», por lo que cualquiera que conozca la contraseña de "
+"root podrá entrar mediante ssh directamente como root. En opinión del "
+"mantenedor ésta es la opción predeterminada más adecuada (puede leer README."
+"Debian si quiere conocer más detalles), pero siempre puede editar "
+"sshd_config y poner no si lo desea."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Es muy recomendable que permita que se genere un nuevo fichero de "
+"configuración ahora."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "Permitir sólo la versión 2 del protocolo SSH"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"Esta versión de OpenSSH soporta la versión 2 del protocolo ssh, que es mucho "
+"más segura que la anterior. Se recomienda desactivar la versión 1, aunque "
+"funcionará más lento en máquinas modestas y puede impedir que se conecten "
+"clientes antiguos, como, por ejemplo, el incluido en «potato»."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"También tenga en cuenta que las claves utilizadas para el protocolo 1 son "
+"diferentes, por lo que no podrá usarlas si únicamente permite conexiones "
+"mediante la versión 2 del protocolo."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"Si más tarde cambia de opinión, el fichero README.Debian contiene "
+"instrucciones sobre cómo modificar en el fichero sshd_config."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "¿Desea continuar, aún a riesgo de matar las sesiones ssh activas?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"La versión de /etc/init.d/ssh que tiene instalada es muy probable que mate "
+"el demonio ssh. Si está actualizando a través de una sesión ssh, puede que "
+"no sea muy buena idea."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Puede arreglarlo añadiendo «--pidfile /var/run/sshd.pid» a la línea 'start-"
+"stop-daemon', en la sección 'stop' del fichero."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr "NOTA: Reenvío de X11 y Autorización desactivadas por defecto."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"Por razones de seguridad, la versión de ssh de Debian tiene por defecto "
+"ForwardX11 y ForwardAgent desactivadas."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"Puede activar estas opciones para los servidores en los que confíe, en los "
+"ficheros de configuración o con la opción -X en línea de comandos."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr "Puede encontrar más detalles en /usr/share/doc/ssh/README.Debian."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"Aviso: tiene rsh-server instalado (seguramente, esto no es una buena idea)"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Tener rsh-server instalado representa un menoscabo de la seguridad que "
+"probablemente desea obtener instalando ssh. Es muy aconsejable que borre ese "
+"paquete."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Aviso: tiene telnetd instalado (posiblemente no es una buena idea)"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Es muy aconsejable que borre el paquete telnetd si no necesita realmente "
+"ofrecer acceso mediante telnet o instalar telnetd-ssl para que las "
+"contraseñas, nombres de usuario y demás información de las sesiones telnet "
+"no viajen sin cifrar por la red."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "Aviso: debe crear una nueva clave para su servidor"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Su sistema tiene un /etc/ssh/ssh_host_key antiguo, que usa cifrado IDEA. "
+"OpenSSH no puede manejar este fichero de claves y tampoco se encuentra la "
+"utilidad ssh-keygen incluida en el paquete ssh no libre."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "Necesitará generar una nueva clave para su servidor."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "Las claves ssh2 ya se incluyen en los ficheros de configuración"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "A partir de la versión 3, OpenSSH ya no utiliza ficheros diferentes para "
+#~ "las claves ssh1 y ssh2. Esto quiere decir que ya no son necesarios los "
+#~ "ficheros authorized_keys2 y known_hosts2, aunque aún se seguirán leyendo "
+#~ "para mantener compatibilidad hacia atrás."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "¿Quiere ejecutar el servidor sshd?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Este paquete contiene el cliente ssh y el servidor sshd."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Generalmente, el servidor de ssh (Secure Shell Server) se ejecuta para "
+#~ "permitir el acceso remoto mediante ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Si sólo está interesado en usar el cliente ssh en conexiones salientes "
+#~ "del sistema y no quiere acceder a él mediante ssh, entonces puede "
+#~ "desactivar sshd."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Las opciones de entorno para las claves, en desuso"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "Esta versión de OpenSSH tiene desactivada por defecto la opción de "
+#~ "entorno para las claves públicas, para evitar ciertos ataques (por "
+#~ "ejemplo, basados en LD_PRELOAD). Si utiliza esta opción en un fichero "
+#~ "authorized_keys, las claves implicadas no funcionarán hasta que borre la "
+#~ "opción."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Para volver a activar esta opción, escriba «PermitUserEnvironment yes» "
+#~ "en /etc/ssh/sshd_config al terminar la actualización, teniendo en cuenta "
+#~ "el aviso de la página de manual de sshd_config(5)."
+
+#~ msgid "Privilege separation"
+#~ msgstr "Separación de privilegios"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "La separación de privilegios está activa por defecto, por lo que si "
+#~ "decide desactivarla, tiene que añadir «UsePrivilegeSeparation no» al "
+#~ "fichero /etc/ssh/sshd_config."
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "Activar separación de privilegios"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "Esta versión de OpenSSH incluye una nueva opción de separación de "
+#~ "privilegios que reduce significativamente la cantidad de código que se "
+#~ "ejecuta como root, por lo que reduce el impacto de posibles agujeros de "
+#~ "seguridad en sshd."
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "Desafortunadamente, la separación de privilegios no funciona "
+#~ "correctamente con PAM. Cualquier módulo PAM que necesite ejecutarse como "
+#~ "root (como, por ejemplo, pam_mkhomedir) y la autenticación interactiva "
+#~ "PAM con teclado no funcionarán."
+
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "Puesto que ha elegido crear automáticamente el fichero sshd_config, puede "
+#~ "decidir ahora si quiere activar la opción de separación de privilegios. A "
+#~ "menos que necesite usar ciertas características de PAM que no funcionan "
+#~ "con esta opción, debería responder sí a esta pregunta."
+
+#~ msgid ""
+#~ "NB! If you are running a 2.0 series Linux kernel, then privilege "
+#~ "separation will not work at all, and your sshd will fail to start unless "
+#~ "you explicitly turn privilege separation off."
+#~ msgstr ""
+#~ "Nota: Si utiliza un núcleo Linux 2.0, la separación de privilegios "
+#~ "fallará estrepitosamente y sshd no funcionará a no ser que la desactive."
diff --git a/debian/po/fi.po b/debian/po/fi.po
new file mode 100644
index 000000000..ee0430eda
--- /dev/null
+++ b/debian/po/fi.po
@@ -0,0 +1,308 @@
+# translation of fi.po to Finnish
+# openssh translation
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+# Matti Pöllä <mpo@iki.fi>, 2004.
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2004-08-12 21:25+0300\n"
+"Last-Translator: Matti Pöllä <mpo@iki.fi>\n"
+"Language-Team: Finnish <debian-l10n-finnish@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "Haluatko, että /usr/lib/ssh-keygen asennetaan SUID root -oikeuksin?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr "Voit valinnaisesti asentaa ssh-keysign-apuohjelman SUID-bitillä."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"Jos SUID on päällä, voit käyttää SSH-protokollan version 2 konekohtaista \n"
+"todennusta."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"Jos olet epävarma, SUID-bitin käyttämistä suositellaan. Jos se aiheuttaa \n"
+"ongelmia, voit myöhemmin muuttaa mielesi komennolla \"dpkg-reconfigure ssh\"."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Luo uusi asetustiedosto"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Tämän OpenSSH-version käyttämän asetustiedoston muoto poikkeaa \n"
+"huomattavasti Debian \"Potato\":n mukana toimitetusta versiosta, jota olet \n"
+"päivittämässä. Uusi asetustiedosto (/etc/ssh/sshd.config) voidaan \n"
+"luoda nyt. Uudet asetukset toimivat uuden palvelinversion kanssa, mutta \n"
+"vanhaan versioon itse tehdyt mukautukset menetetään."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Huomaa, että uudessa asetustiedostossa muuttujalla \"PermitRootLogin\" \n"
+"on arvo \"yes\" (tarkoittaen, että kuka tahansa pääkäyttäjän salasanan "
+"tietävä \n"
+"voi kirjautua suoraan ssh:n avulla pääkäyttäjänä). Paketin ylläpitäjän "
+"mielestä \n"
+"tämä on sopiva oletusarvo (lisätietoa tiedostossa README.Debian), mutta "
+"tämän \n"
+"voi halutessaan muuttaa arvoon \"no\" muokkaamalla tiedostoa sshd_config."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr "Uuden asetustiedoston luominen on erittäin suositeltavaa."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "Salli ainoastaan SSH-protokollan versio 2"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"Tämä OpenSSH:n versio tukee ssh-protokollan versiota 2, joka on "
+"huomattavasti \n"
+"turvallisempi. Protokollan ykkösversion käytöstä poistamista suositellaan, "
+"mutta \n"
+"se voi aiheuttaa toiminnan hitautta pienitehoisissa koneissa ja estää "
+"yhteyden \n"
+"ottamisen vanhemmilla asiakasohjelmilla. (Tämä koskee mm. Debian \"potaton\":"
+"n \n"
+"mukana toimitettua ssh-asiakasohjelmaa.)"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"Huomaa myös, että version 1 kanssa käytetyt avaimet ovat erilaisia, joten \n"
+"et voi käyttää niitä, jos sallit yhteydet vain versiolla 2."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"Jos muutat myöhemmin mielesi tämän asetuksen suhteen, tiedostossa \n"
+"README.Debian on ohjeet tiedoston sshd_config muokkaamiseen."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "Haluatko jatkaa (ja mahdollisesti lopettaa aktiiviset ssh-istunnot)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Asennettu versio tiedostosta /etc/init.d/ssh lopettaa todennäköisesti "
+"kaikki \n"
+"käynnissä olevat sshd-prosessit. Jos teet tätä päivitystä ssh-yhteyden "
+"yli, \n"
+"tämä on Huono Juttu(tm)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Voit korjata tämän lisäämällä \"--pidfile /var/run/sshd.pid\" tiedoston \n"
+"stop-osion start-stop-daemon -riville."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr ""
+"HUOMAA: X11:n ja valtuuksien (Authorization) edelleenlähettäminen on \n"
+"oletusarvoisesti pois käytöstä."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"Turvallisuussyistä Debianin ssh:ssa muuttujilla ForwardX11 ja \n"
+"ForwardAgent on oletuksena arvo \"off\"."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"Voit sallia sen luotetuille palvelimille joko asetustiedostossa tai\n"
+"komentorivillä käyttämällä -X -valitsinta."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr "Lisätietoja tiedostossa /usr/share/doc/ssh/README.Debian"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Varoitus: rsh-palvelin on asennettu --- tämä ei liene hyvä idea"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Rsh-palvelimen pitäminen vie pohjan turvallisuudelta, jota todennäköisesti \n"
+"halusit asentamalla ssh:n. Paketin poistaminen on suositeltavaa."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Varoitus: telnetd on asennettu --- tämä ei liene hyvä idea"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"On suositeltavaa joko poistaa telnetd-paketti (jos telnet-yhteyksien "
+"tarjoaminen \n"
+"ei ole tarpeellista) tai asentaa paketti telnetd-ssl, jotta salaamattomia \n"
+"käyttäjätunnuksia/salasanoja ja istunnon tietoja ei lähetettäisi verkon yli."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "Varoitus: sinun tulee luoda uusi konekohtainen avain (host key)"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Olemassa oleva tiedosto /etc/ssh/ssh_host_key on salattu \n"
+"IDEA-algoritmilla. OpenSSH ei voi käsitellä tätä konekohtaista "
+"avaintiedostoa, \n"
+"eikä vanhan (ei-vapaan) SSH-asennuksen ssh-keygen-ohjelmaa löydy."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "Uuden konekohtaisen avaimen (host key) luominen on tarpeen."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
diff --git a/debian/po/fr.po b/debian/po/fr.po
new file mode 100644
index 000000000..889948e12
--- /dev/null
+++ b/debian/po/fr.po
@@ -0,0 +1,318 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh 3.8.1p1-8.sarge.1\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2004-10-13 22:39+0200\n"
+"Last-Translator: Denis Barbier <barbier@linuxfr.org>\n"
+"Language-Team: French <Debian-l10n-french@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "Faut-il installer /usr/lib/ssh-keysign avec le bit SETUID activé ?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr "Vous pouvez installer ssh-keysign avec le bit SETUID activé."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"Si vous choisissez cette option, vous permettrez l'authentification basée "
+"sur les hôtes, disponible dans la version 2 du protocole SSH."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"Dans le doute, vous devriez l'installer avec le bit SETUID activé. Si cela "
+"vous pose des problèmes, vous pourrez revenir sur votre décision avec « dpkg-"
+"reconfigure ssh »."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Faut-il créer un nouveau fichier de configuration ?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Cette version d'OpenSSH utilise un fichier de configuration qui a fortement "
+"changé depuis la version contenue dans la distribution Debian « Potato », "
+"depuis laquelle vous semblez faire une mise à jour. Un nouveau fichier de "
+"configuration (/etc/ssh/sshd.config) qui fonctionnera avec la nouvelle "
+"version du serveur peut être créé, mais ne contiendra aucun des réglages que "
+"vous aviez faits avec la version précédente."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Veuillez noter que ce nouveau fichier de configuration positionnera la "
+"valeur de « PermitRootLogin » à « yes » (ce qui signifie que quiconque "
+"connaissant le mot de passe du superutilisateur peut se connecter en tant "
+"que tel sur la machine). Le responsable du paquet pense que c'est là un "
+"comportement par défaut normal (lisez README.Debian pour plus "
+"d'informations), mais vous pouvez toujours modifier le fichier sshd_config "
+"et changer cela."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Il est fortement recommandé de créer un nouveau fichier de configuration."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "Faut-il autoriser uniquement la version 2 du protocole SSH ?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"Cette version d'OpenSSH gère la version 2 du protocole SSH, qui est bien "
+"plus sûre. Désactiver la version 1 est recommandé, cependant cela peut "
+"ralentir les machines peu puissantes et pourrait empêcher ceux qui utilisent "
+"de vieilles versions de la partie cliente de se connecter (le client ssh de "
+"la distribution Debian « Potato » en fait partie)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"De plus, les clés utilisées par la version 1 du protocole sont différentes "
+"et vous ne pourrez pas les utiliser si vous n'autorisez que les connexions "
+"utilisant la version 2 du protocole."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"Si vous changez d'avis ultérieurement et décidez de modifier ce réglage, les "
+"instructions fournies dans le fichier README.Debian vous indiquent comment "
+"modifier le fichier sshd_config."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+"Voulez-vous continuer (et risquer de rompre les sessions SSH actives) ?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"La version de /etc/init.d/ssh que vous venez d'installer va "
+"vraisemblablement interrompre toutes les instances de sshd en cours. Si vous "
+"êtes en train de faire cette mise à niveau à l'aide de SSH, ce serait "
+"regrettable."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Vous pouvez corriger cela en ajoutant dans /etc/init.d/ssh « --pidfile /var/"
+"run/sshd.pid » à la ligne « start-stop-daemon » dans la section « stop » du "
+"fichier."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr "Suivi de session X11 et d'agent d'autorisation désactivés par défaut."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"Pour des raisons de sécurité, la version Debian de ssh positionne les "
+"options ForwardX11 et ForwardAgent à « Off » par défaut."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"Vous pouvez activer ces options pour les serveurs en qui vous avez "
+"confiance, soit dans un des fichiers de configuration, soit avec l'option -X "
+"de la ligne de commande."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr ""
+"Vous trouverez plus d'informations dans /usr/share/doc/ssh/README.Debian."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Rsh-server installé : paquet déconseillé"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Avoir un serveur rsh installé affaiblit la sécurité que vous vouliez "
+"probablement obtenir en installant SSH. Il est conseillé de supprimer ce "
+"paquet."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Telnetd installé : paquet déconseillé"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Vous devriez soit enlever le paquet telnetd (si ce service n'est pas "
+"nécessaire), soit le remplacer par le paquet telnetd-ssl pour qu'il y ait au "
+"moins une chance que les sessions telnet soient chiffrées et que les mots de "
+"passe et noms d'utilisateurs ne passent pas en clair sur le réseau."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "Nouvelle clé d'hôte nécessaire"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Un ancien fichier /etc/ssh/ssh_host_key, chiffré avec IDEA, est actuellement "
+"utilisé. OpenSSH ne peut utiliser ce fichier de clé, et l'utilitaire ssh-"
+"keygen de l'installation précédente (non libre) de SSH n'a pas été trouvé."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "Vous devez générer une nouvelle clé d'hôte."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr "Faut-il désactiver l'authentification par défi-réponse ?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"L'authentification par mots de passe semble être désactivée dans la "
+"configuration actuelle de votre serveur OpenSSH. Afin de vraiment empêcher "
+"les utilisateurs de se connecter avec un mot de passe (par exemple en "
+"n'autorisant que l'authentification par clé publique), vous devez aussi "
+"désactiver l'authentification par défi-réponse dans les versions récentes "
+"d'OpenSSH, ou alors vous assurer que votre configuration de PAM n'autorise "
+"pas l'authentification avec le fichier de mots de passe."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Si vous désactivez l'authentification par défi-réponse, alors les "
+"utilisateurs ne pourront pas se connecter en entrant un mot de passe. Si "
+"vous la laissez active (ce qui est le défaut), alors l'option "
+"« PasswordAuthentication no » n'aura d'effet que si vous ajustez aussi la "
+"configuration de PAM dans /etc/pam.d/ssh."
diff --git a/debian/po/it.po b/debian/po/it.po
new file mode 100644
index 000000000..303cf5e52
--- /dev/null
+++ b/debian/po/it.po
@@ -0,0 +1,414 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh 3.6.1\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2003-12-21 12:23+0100\n"
+"Last-Translator: Renato Gini <rgini@openlabs.it>\n"
+"Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "Si desidera installare /usr/lib/ssh-keysign come SUID-root?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr ""
+"Si ha la possibilità di installare l'helper ssh-keysign con il bit SUID "
+"impostato."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"Se si imposta ssh-keysign come SUID, sarà possibile usare l'autenticazione "
+"basata su host del protocollo 2 di SSH."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"Nel dubbio, è consigliabile installarlo come SUID. Se ciò causa problemi "
+"sarà possibile cambiare idea successivamente eseguendo «dpkg-reconfigure ssh»"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Generare un nuovo file di configurazione"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Questa versione di OpenSSH contiene un file di configurazione "
+"significativamente modificato rispetto a quello distribuito in Debian "
+"\"Potato\", che sembra essere quello che si sta aggiornando. È ora possibile "
+"generare automaticamente un nuovo file di configurazione (/etc/ssh/sshd."
+"config) che funzionerà con la nuova versione del server, ma non conterrà "
+"nessuna delle personalizzazioni apportate nella precedente versione."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"N.B.: questo nuovo file di configurazione imposterà il valore di "
+"\"PermitRootLogin\" a \"yes\" (che significa che chiunque conosca la "
+"password dell'account root potrà collegarsi tramite ssh direttamente come "
+"root). È opinione del manutentore del pacchetto che questo sia il corretto "
+"valore predefinito (vedere README.Debian per ulteriori dettagli) ma, se si "
+"desidera, è sempre possibile modificare il file sshd_config e impostare il "
+"valore a \"no\"."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"È fortemente raccomandata la generazione automatica di un nuovo file di "
+"configurazione."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "Consentire solo il protocollo 2 di SSH"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"Questa versione di OpenSSH supporta la versione 2 del protocollo ssh, che è "
+"molto più sicura. Si consiglia la disabilitazione di ssh 1, tuttavia ciò "
+"rallenterà le operazioni su macchine di basso livello e potrebbe impedire ai "
+"client più vecchi di collegarsi (il client distribuito con \"potato\" ne è "
+"un esempio)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"Notare inoltre che le chiavi usate per il protocollo 1 sono diverse, per cui "
+"non sarà possibile usarle se saranno abilitate solo le connessioni con il "
+"protocollo 2."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"Se successivamente si cambierà idea su questa impostazione, nel file README."
+"Debian sono presenti istruzioni sulle modifiche da fare nel file sshd_config."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+"Si desidera continuare (e rischiare di terminare le sessioni ssh attive)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"La versione di /etc/init.d/ssh attualmente installata probabilmente "
+"terminerà tutte le istanze di sshd attive. Se si sta effettuando questo "
+"aggiornamento tramite una sessione ssh, questo potrebbe causare un "
+"comportamento imprevedibile."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"È possibile correggere ciò aggiungendo «--pidfile /var/run/sshd.pid» alla "
+"riga \"start-stop-daemon\" nella sezione \"stop\" del file."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr ""
+"NOTA: Forwarding di X11 e Authorization sono disabilitati come impostazione "
+"predefinita."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"Per questioni di sicurezza, la versione Debian di ssh contiene \"ForwardX11"
+"\" e \"ForwardAgent\" impostati a \"off\" come impostazione predefinita."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"È possibile abilitarlo per i server di cui si è sicuri, sia in uno dei file "
+"di configurazione, sia tramite l'opzione -X della rigaa di comando."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr "Maggiori dettagli si trovano in /usr/share/doc/ssh/README.Debian"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"Attenzione: rsh-server è installato --- probabilmente non è una buona idea"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"avere rsh-server installato mina la sicurezza che probabilmente si voleva "
+"ottenere installando ssh. È consigliabile rimuovere il pacchetto."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr ""
+"Attenzione: telnetd è installato --- probabilmente non è una buona idea"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"È consigliabile rimuovere il pacchetto telnetd (se non è proprio necessario "
+"offrire l'accesso via telnet) o installare telnetd-ssl per evitare che ci "
+"sia qualche possibilità che la sessione telnet invii sulla rete login/"
+"password e informazioni di sessione non criptate."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "Attenzione: è necessario creare una nuova chiave host"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"C'è una vecchio file /etc/ssh/ssh_host_key, che è criptato in modalità IDEA. "
+"OpenSSH non è in grado di gestire questo file di chiave host e non è "
+"presente il programma di utilità ssh-keygen dalla precedente installazione "
+"di SSH (non-free)."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "Sarà necessario generare una nuova chiave host."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "chiavi ssh2 aggiunte nei file di configurazione"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "Dalla versione 3 OpenSSH non usa più file separati per le chiavi ssh1 e "
+#~ "ssh2. Ciò comporta che i file authorized_keys2 e known_hosts2 non sono "
+#~ "più necessari. Essi verranno comunque letti al fine di mantenere la "
+#~ "compatibilità all'indietro."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Si desidera avviare il server sshd?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Questo pacchetto contiene sia il client ssh che il server sshd."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Normalmente il \"Secure Shell Server\" sshd verrà attivato per permettere "
+#~ "connessioni remote attraverso ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Se si è unicamente interessati all'uso del client ssh per connessioni in "
+#~ "uscita da questo computer e non si vuole che ci si possa collegare usando "
+#~ "ssh, sshd può essere disabilitato."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Le opzioni di ambiente sulle chiavi sono state deprecate"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "Questa versione di OpenSSH disabilita l'opzione di ambiente per le chiavi "
+#~ "pubbliche, come impostazione predefinita, al fine di evitare certi "
+#~ "attacchi (per esempio LD_PRELOAD). Se si sta usando questa opzione in un "
+#~ "file authorized_keys, occorre fare attenzione al fatto che le chiavi in "
+#~ "questione non funzioneranno più finché l'opzione sarà rimossa."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Per riabilitare questa opzione, impostare \"PermitUserEnvironment yes\" "
+#~ "nel file /etc/ssh/sshd_config dopo l'aggiornamento, considerando gli "
+#~ "avvertimenti contenuti nella pagina del manuale sshd_config(5)."
+
+#~ msgid "Privilege separation"
+#~ msgstr "Separazione dei privilegi"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "La separazione dei privilegi è abilitata in modo predefinito quindi, se "
+#~ "si decide di disabilitarla, è necessario aggiungere "
+#~ "\"UsePrivilegeSeparation no\" a /etc/ssh/sshd_config."
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "Abilita la separazione dei privilegi"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "Questa versione di OpenSSH contiene la nuova opzione per la separazione "
+#~ "dei privilegi. Ciò riduce significativamente la quantità di codice "
+#~ "eseguito come root, riducendo così l'impatto di eventuali falle di "
+#~ "sicurezza in sshd."
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "Purtroppo la separazione dei privilegi interagisce male con PAM. "
+#~ "Qualsiasi modulo di sessione PAM che richiede di essere eseguito come "
+#~ "root (ad esempio, pam_mkhomedir) fallirà e l'autenticazione interattiva "
+#~ "da tastiera di PAM non funzionerà."
+
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "Poiché si è scelto di generare automaticamente un file sshd_config, è "
+#~ "possibile decidere se abilitare o meno la separazione dei privilegi. A "
+#~ "meno che si sappia che sarà necessario usare le caratteristiche di PAM "
+#~ "che non funzioneranno con questa opzione, è consigliato abilitarla."
diff --git a/debian/po/ja.po b/debian/po/ja.po
new file mode 100644
index 000000000..6e77f464e
--- /dev/null
+++ b/debian/po/ja.po
@@ -0,0 +1,406 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2004-10-20 08:53+0900\n"
+"Last-Translator: Kenshi Muto <kmuto@debian.org>\n"
+"Language-Team: Japanese <debian-japanese@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=EUC-JP\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "/usr/bin/ssh-keysign ¤ò SUID root ¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¤«?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr ""
+"ssh-keysign ¥Ø¥ë¥Ñ¡¼¤ò¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ëºÝ¡¢SUID ¥Ó¥Ã¥È¤òÀßÄꤹ¤ë¤«¤·¤Ê¤¤¤«¤òÁª"
+"¤Ö¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"ssh-keysign ¤ò SUID ¤ËÀßÄꤷ¤¿¾ì¹ç¡¢SSH ¥×¥í¥È¥³¥ë 2 ¤Î¥Û¥¹¥È¤Ë´ð¤Å¤¯Ç§¾Ú¤ò»È"
+"¤¦¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"¤è¤¯Ê¬¤«¤é¤Ê¤¤¾ì¹ç¤Ï¡¢SUID ¤òÍ­¸ú¤Ë¤¹¤ë¤³¤È¤ò¤ª´«¤á¤·¤Þ¤¹¡£¤â¤· ÌäÂ꤬µ¯¤³¤ì"
+"¤Ð¡¢dpkg-reconfigure ssh ¤ò¼Â¹Ô¤¹¤ë¤³¤È¤ÇÀßÄê¤òÊѹ¹¤¹¤ë¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "¿·¤·¤¤ÀßÄê¥Õ¥¡¥¤¥ë¤òºî¤ê¤Þ¤¹"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"OpenSSH ¤Î¤³¤Î¥Ð¡¼¥¸¥ç¥ó¤Ï¡¢Debian 'Potato' ¤Ë´Þ¤Þ¤ì¤Æ¤¤¤ë¥Ð¡¼¥¸¥ç¥ó (¤¤¤Þ¡¢"
+"¤½¤Î¥Ð¡¼¥¸¥ç¥ó¤«¤é¤Î¥Ð¡¼¥¸¥ç¥ó¥¢¥Ã¥×¤ò»î¤ß¤Æ¤¤¤ë¤È¤³¤í) ¤«¤é¡¢ÀßÄê¥Õ¥¡¥¤¥ë¤¬"
+"ÂçÉý¤ËÊѲ½¤·¤Æ¤¤¤Þ¤¹¡£¤¤¤Þ¡¢¿·¤·¤¤¥Ð¡¼¥¸¥ç¥ó¤Î¥µ¡¼¥Ð¤Ç»È¤¦¤³¤È¤¬¤Ç¤­¤ë¿·¤·¤¤"
+"ÀßÄê¥Õ¥¡¥¤¥ë (/etc/ssh/sshd/config) ¤ò¼«Æ°À¸À®¤¹¤ë¤³¤È¤¬¤Ç¤­¤Þ¤¹¤¬¡¢¤½¤Î¥Õ¥¡"
+"¥¤¥ë¤Ï¡¢¸Å¤¤¥Ð¡¼¥¸¥ç¥ó¤ÎÀßÄê¥Õ¥¡¥¤¥ë¤Ë´Þ¤Þ¤ì¤ë¤¢¤Ê¤¿¤ÎÀßÄ꤬¤Þ¤Ã¤¿¤¯´Þ¤Þ¤ì¤Þ"
+"¤»¤ó¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"¤³¤Î¿·¤·¤¤ÀßÄê¥Õ¥¡¥¤¥ë¤Ï¡¢¡ÖPermitRootLogin¡×¤ò¡Öyes¡×¤ËÀßÄꤷ¤Þ¤¹ (¤Ä¤Þ¤ê¡¢"
+"root ¤Î¥Ñ¥¹¥ï¡¼¥É¤òÃΤäƤ¤¤ë¿Í¤Ê¤éï¤Ç¤âľÀÜ¥í¥°¥¤¥ó¤Ç¤­¤Þ¤¹)¡£¤³¤ì¤Ç¤è¤¤¡¢"
+"¤È¤¤¤¦¤Î¤¬¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤Î¥á¥ó¥Æ¥Ê¤Î°Õ¸«¤Ç¤¹¤¬ (¾Ü¤·¤¯¤Ï README.Debian ¤òÆɤó"
+"¤Ç¤¯¤À¤µ¤¤)¡¢sshd_config ¤òÊÔ½¸¤·¤Æ¡Öno¡×¤ËÀßÄꤹ¤ë¤³¤È¤â¤Ç¤­¤Þ¤¹¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr "¿·¤·¤¤ÀßÄê¥Õ¥¡¥¤¥ë¤ò¼«Æ°À¸À®¤¹¤ë¤³¤È¤ò¶¯¤¯¤ª´«¤á¤·¤Þ¤¹¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "SSH ¥×¥í¥È¥³¥ë 2 ¤Î¤ß¤òµö²Ä¤·¤Þ¤¹"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"OpenSSH ¤Î¤³¤Î¥Ð¡¼¥¸¥ç¥ó¤Ï¡¢¤º¤Ã¤È°ÂÁ´¤Ê¡¢ssh ¥×¥í¥È¥³¥ë¤Î¥Ð¡¼¥¸¥ç¥ó 2 ¤ò¥µ"
+"¥Ý¡¼¥È¤·¤Æ¤¤¤Þ¤¹¡£ssh 1 ¤ò¶Ø»ß¤¹¤ë¤³¤È¤ò¤ª´«¤á¤·¤Þ¤¹¤¬¡¢ÃÙ¤¤¥Þ¥·¥ó¤Ç¤ÏÆ°ºî¤¬"
+"ÃÙ¤¯¤Ê¤Ã¤¿¤ê¡¢¸Å¤¤¥¯¥é¥¤¥¢¥ó¥È¤«¤éÀܳ¤Ç¤­¤Ê¤¯¤Ê¤Ã¤¿¤ê¤·¤Þ¤¹ (\"potato\" ¤Î "
+"ssh ¥¯¥é¥¤¥¢¥ó¥È¤âÀܳ¤Ç¤­¤Ê¤¯¤Ê¤ê¤Þ¤¹)¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"¤Þ¤¿¡¢¥×¥í¥È¥³¥ë 1 ¤Ç»È¤¦¥­¡¼¤Ï°Û¤Ê¤ë¤¿¤á¡¢¥×¥í¥È¥³¥ë 2 ¤òÍ­¸ú¤Ë¤·¤¿¤À¤±¤Ç¤Ï"
+"¤½¤Î¥­¡¼¤ò»È¤¦¤³¤È¤¬¤Ç¤­¤Þ¤»¤ó¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"¤â¤·º£¸å¤¢¤Ê¤¿¤¬¹Í¤¨¤òÊѤ¨¤¿¤é¡¢README.Debian ¤òÆɤà¤È sshd_config ¤ò¤É¤Î¤è¤¦"
+"¤ËÊѹ¹¤·¤¿¤é¤è¤¤¤«¤¬Ê¬¤«¤ê¤Þ¤¹¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "³¤±¤Æ¤è¤¤¤Ç¤¹¤« (ÀܳÃæ¤Î ssh ¥»¥Ã¥·¥ç¥ó¤¬ÀÚ¤ì¤ë¤«¤â¤·¤ì¤Þ¤»¤ó)"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"¤¤¤Þ¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿ /etc/init.d/ssh ¤Ï¡¢¤ª¤½¤é¤¯¼Â¹ÔÃæ¤Î sshd ¤ò¤¹¤Ù¤ÆÄä»ß¤µ"
+"¤»¤Þ¤¹¡£¤³¤Î¥Ð¡¼¥¸¥ç¥ó¥¢¥Ã¥×¤ò ssh ¥»¥Ã¥·¥ç¥ó¤òÍѤ¤¤Æ¹Ô¤¦¤Î¤Ï´Ö°ã¤Ã¤¿¤ä¤ê¤«¤¿"
+"¤Ç¤¹¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"¤³¤Î¾õ¶·¤ò½¤Àµ¤¹¤ë¤Ë¤Ï¡¢/etc/init.d/ssh ¤Î stop ¥»¥¯¥·¥ç¥ó¤Î start-stop-"
+"daemon ¤Î¹Ô¤Ë¡Ö--pidfile /var/run/sshd.pid¡×¤ÈÄɲä·¤Þ¤¹¡£"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr "Ãí°Õ: X11 ¤Èǧ¾Ú¤Î¥Õ¥©¥ï¡¼¥Ç¥£¥ó¥°¤Ï¥Ç¥Õ¥©¥ë¥È¤Ç¤Ï¶Ø»ß¤µ¤ì¤Þ¤¹"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"¥»¥­¥å¥ê¥Æ¥£¾å¤ÎÍýͳ¤«¤é¡¢Debian ¤Î ssh ¤Ç¤Ï ForwardX11 ¤È ForwardAgent ¤Ï¥Ç"
+"¥Õ¥©¥ë¥È¤Ç¤Ï¡Öoff¡×¤ËÀßÄꤵ¤ì¤Þ¤¹¡£"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"ÀßÄê¥Õ¥¡¥¤¥ë¤ò»È¤Ã¤¿¤ê¡¢-X ¥³¥Þ¥ó¥É¥é¥¤¥ó¥ª¥×¥·¥ç¥ó¤ò»È¤Ã¤¿¤ê¤¹¤ë¤³¤È¤Ç¡¢¿®ÍÑ"
+"¤Ç¤­¤ë¥µ¡¼¥Ð¤ËÂФ·¤Æµö²Ä¤¹¤ë¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr "¾ÜºÙ¤Ï /usr/share/doc/ssh/README.Debian ¤òÆɤó¤Ç¤¯¤À¤µ¤¤¡£"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"·Ù¹ð: rsh-server ¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¤¤¤Þ¤¹¡£¤¿¤Ö¤óÎɤ¤¹Í¤¨¤Ç¤Ï¤¢¤ê¤Þ¤»¤ó"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"rsh-server ¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¤¤¤ë¤È¡¢¤¢¤Ê¤¿¤¬ ssh ¤Ë¤è¤Ã¤ÆÆÀ¤¿¤¤¤È»×¤Ã¤Æ¤¤"
+"¤ë¤Ç¤¢¤í¤¦¥»¥­¥å¥ê¥Æ¥£¤¬Â»¤Ê¤ï¤ì¤Þ¤¹¡£¤½¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¥¢¥ó¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤³"
+"¤È¤ò¤ª´«¤á¤·¤Þ¤¹¡£"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "·Ù¹ð: telnetd ¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¤¤¤Þ¤¹¡£¤¿¤Ö¤óÎɤ¤¹Í¤¨¤Ç¤Ï¤¢¤ê¤Þ¤»¤ó"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"(¤â¤· telnet ¥¢¥¯¥»¥¹¤òÄ󶡤·¤¿¤¤¤È»×¤Ã¤Æ¤¤¤Ê¤¤¤Î¤Ç¤·¤¿¤é) telnetd ¥Ñ¥Ã¥±¡¼¥¸"
+"¤ò¥¢¥ó¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤«¡¢¤Þ¤¿¤Ï¡¢telnetd-ssh ¥Ñ¥Ã¥±¡¼¥¸¤ò ¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¾¯"
+"¤Ê¤¯¤È¤â¥Í¥Ã¥È¥ï¡¼¥¯¾å¤ò°Å¹æ²½¤µ¤ì¤Æ¤¤¤Ê¤¤¥æ¡¼¥¶Ì¾¤ä¥Ñ¥¹¥ï¡¼¥É¤ä¥»¥Ã¥·¥ç¥ó¾ð"
+"Êó¤¬Î®¤ì¤Ê¤¤¤è¤¦¤Ë¤¹¤ë¤³¤È¤ò¤ª´«¤á¤·¤Þ¤¹¡£"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "·Ù¹ð: ¿·¤·¤¤¥Û¥¹¥È¥­¡¼¤òºî¤é¤Ê¤¤¤È¤¤¤±¤Þ¤»¤ó"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"IDEA ¤Ç°Å¹æ²½¤µ¤ì¤¿¸Å¤¤¥­¡¼¤¬ /etc/ssh/ssh_host_key ¤Ë¤¢¤ê¤Þ¤¹¡£ OpenSSH ¤Ï¤³"
+"¤Î¥Û¥¹¥È¥­¡¼¥Õ¥¡¥¤¥ë¤ò°·¤¨¤Þ¤»¤ó¡£¤Þ¤¿¡¢º£¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¤¤¤ë¸Å¤¤ (¥Õ¥ê¡¼"
+"¤Ç¤Ï¤Ê¤¤) SSH ¤Ë¤Ï ssh-keygen ¥æ¡¼¥Æ¥£¥ê¥Æ¥£¤¬´Þ¤Þ¤ì¤Æ¤¤¤Þ¤»¤ó¡£"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "¿·¤·¤¤¥Û¥¹¥È¥­¡¼¤òºî¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr "¥Á¥ã¥ì¥ó¥¸-¥ì¥¹¥Ý¥ó¥¹Ç§¾Ú¤ò̵¸ú¤Ë¤·¤Þ¤¹¤«?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"¸½ºß¤Î OpenSSH ¥µ¡¼¥Ð¤ÎÀßÄê¤Ç¤Ï¥Ñ¥¹¥ï¡¼¥Éǧ¾Ú¤¬Ìµ¸ú¤Ë¤Ê¤Ã¤Æ¤¤¤ë¤è¤¦¤Ç¤¹¡£"
+"OpenSSH ¤ÎºÇ¶á¤Î¥Ð¡¼¥¸¥ç¥ó¤Ç¥Ñ¥¹¥ï¡¼¥É¤ò»È¤Ã¤Æ¥æ¡¼¥¶¤¬¥í¥°¥¤¥ó¤¹¤ë¤Î¤òËɤ° "
+"(¿ʬ¸ø³«¸°Ç§¾Ú¤À¤±¤òÂå¤ï¤ê¤Ë»È¤¦) ¤¿¤á¤Ë¤Ï¡¢¥Á¥ã¥ì¥ó¥¸-¥ì¥¹¥Ý¥ó¥¹Ç§¾Ú¤ò̵¸ú"
+"¤Ë¤¹¤ë¤«¡¢PAM ÀßÄê¤Ç Unix ¥Ñ¥¹¥ï¡¼¥É¥Õ¥¡¥¤¥ëǧ¾Ú¤òÀäÂФ˵ö²Ä¤·¤Ê¤¤¤è¤¦¤Ë¤¹¤ë"
+"ɬÍפ¬¤¢¤ê¤Þ¤¹¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"¥Á¥ã¥ì¥ó¥¸-¥ì¥¹¥Ý¥ó¥¹Ç§¾Ú¤ò̵¸ú¤Ë¤¹¤ë¾ì¹ç¡¢¥æ¡¼¥¶¤Ï¥Ñ¥¹¥ï¡¼¥É¤ò»È¤Ã¤Æ¥í¥°¥¤¥ó"
+"¤Ç¤­¤Ê¤¯¤Ê¤ê¤Þ¤¹¡£Í­¸ú (¥Ç¥Õ¥©¥ë¥È) ¤Î¤Þ¤Þ¤Ë¤·¤Æ¤ª¤¯¤È¡¢/etc/pam.d/ssh ¤Ë¤¢"
+"¤ë PAM ÀßÄê¤òÄ´Àᤷ¤Ê¤¤¸Â¤ê¡¢'PasswordAuthentication no' ¥ª¥×¥·¥ç¥ó¤Ï¸ú²Ì¤ò»ý"
+"¤¿¤Ê¤¯¤Ê¤ê¤Þ¤¹¡£"
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "ssh2 ¥­¡¼¤ÏÀßÄê¥Õ¥¡¥¤¥ë¤ËÅý¹ç¤µ¤ì¤Þ¤¹"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "OpenSSH ¤Î¥Ð¡¼¥¸¥ç¥ó 3 ¤Ï¡¢ssh1 ¤È ssh2 ¤Î¥­¡¼¤Ë¸ÄÊ̤Υե¡¥¤¥ë¤ò»È¤¤¤Þ¤»"
+#~ "¤ó¡£¤Ä¤Þ¤ê¡¢authorized_keys2 ¥Õ¥¡¥¤¥ë¤È known_hosts2 ¥Õ¥¡¥¤¥ë¤Ï¤â¤Ï¤äÉÔÍ×"
+#~ "¤È¤Ê¤ê¤Þ¤·¤¿¡£¸åÊý¸ß´¹À­¤òÊݤĤ¿¤á¤Ë¤Ï¤³¤ì¤é¤Î¥Õ¥¡¥¤¥ë¤¬É¬ÍפǤ¹¡£"
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "sshd ¥µ¡¼¥Ð¤ò¼Â¹Ô¤·¤Þ¤¹¤«?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr ""
+#~ "¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤Ï¡¢ssh ¥¯¥é¥¤¥¢¥ó¥È¤È sshd ¥µ¡¼¥Ð¤ÎξÊý¤ò´Þ¤ó¤Ç¤¤¤Þ¤¹¡£"
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Ä̾sshd ¥»¥­¥å¥¢¥·¥§¥ë¥µ¡¼¥Ð¤Ï¡¢ssh ¤òÍѤ¤¤¿¥ê¥â¡¼¥È¤«¤é¤Î¥í¥°¥¤¥ó¤ò²Ä"
+#~ "ǽ¤Ë¤¹¤ë¤¿¤á¤Ë¼Â¹Ô¤·¤Þ¤¹¡£"
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "¤â¤· ssh ¥¯¥é¥¤¥¢¥ó¥È¤ò»È¤Ã¤Æ¤³¤Î¥Þ¥·¥ó¤«¤é¾¥Þ¥·¥ó¤Ø¤ÈÀܳ¤¹¤ë¤À¤±¤Ç¡¢¤³"
+#~ "¤Î¥Þ¥·¥ó¤Ø¤È ssh ¤ò»È¤Ã¤Æ¥í¥°¥¤¥ó¤·¤Ê¤¤¤Î¤Ç¤·¤¿¤é¡¢¤³¤³¤Ç sshd ¤ò¼Â¹Ô¤·¤Ê"
+#~ "¤¤¤Ç¤ª¤­¤Þ¤¹¡£"
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "¸°¤Î´Ä¶­¥ª¥×¥·¥ç¥ó¤Ï̵¸ú¤ËÀßÄꤵ¤ì¤Þ¤·¤¿"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "ËܥС¼¥¸¥ç¥ó¤Î OpenSSH ¤Ï¡¢¸ø³«¸°¤Î´Ä¶­¥ª¥×¥·¥ç¥ó¤ò¥Ç¥Õ¥©¥ë¥È¤Ç̵¸ú¤ËÀßÄê"
+#~ "¤·¤Æ¤¤¤Þ¤¹¡£LD_PRELOAD ¤Ê¤É¤Î¹¶·â¤òÈò¤±¤ë¤¿¤á¤Ç¤¹¡£¤â¤· authorized_keys "
+#~ "¥Õ¥¡¥¤¥ë¤Ç¤³¤Î¥ª¥×¥·¥ç¥ó¤ò»ÈÍѤ·¤Æ¤¤¤ë¾ì¹ç¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤ò½üµî¤·¤Ê¤¤¸Â¤ê"
+#~ "¤Ï¤½¤Î¸°¤ÏÍøÍѤǤ­¤Ê¤¤¤³¤È¤ËÃí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£"
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "¤³¤Î¥ª¥×¥·¥ç¥ó¤òºÆ¤ÓÍ­¸ú¤Ë¤¹¤ë¤Ë¤Ï¡¢¥¢¥Ã¥×¥°¥ì¡¼¥É½ªÎ»¸å¤Ë¡¢sshd_config"
+#~ "(5) ¥Þ¥Ë¥å¥¢¥ë¥Ú¡¼¥¸¤Î·Ù¹ð»ö¹à¤òÆɤó¤Ç¡¢ /etc/ssh/sshd_config ¥Õ¥¡¥¤¥ë¤Ë"
+#~ "¡ÖPermitUserEnvironment yes¡×¤ÈÀßÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
+
+#~ msgid "Privilege separation"
+#~ msgstr "Æø¢¤ÎʬΥ"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "Æø¢Ê¬Î¥¤Ï¥Ç¥Õ¥©¥ë¥È¤ÇÍ­¸ú¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£Ìµ¸ú¤Ë¤·¤¿¤¤¾ì¹ç¤Ï¡¢/etc/ssh/"
+#~ "sshd_conf ¤Ë¡ÖUsePrivilegeSeparation no¡×¤È¤¤¤¦¹Ô¤òÄɲ䷤Ƥ¯¤À¤µ¤¤¡£"
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "Æø¢Ê¬Î¥¤òÍ­¸ú¤Ë¤¹¤ë"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "ËܥС¼¥¸¥ç¥ó¤Î OpenSSH ¤Ï¡¢¿·¤·¤¤Æø¢Ê¬Î¥¥ª¥×¥·¥ç¥ó¤ò»ý¤Ã¤Æ¤¤¤Þ¤¹¡£ ¤³¤ì¤Ë"
+#~ "¤è¤Ã¤Æ¡¢root ¸¢¸Â¤Ç¼Â¹Ô¤µ¤ì¤ë¥³¡¼¥É¤ÎÎ̤òÂçÉý¤Ë¸º¤é¤¹¤³¤È¤¬¤Ç¤­¡¢sshd ¤Î¥»"
+#~ "¥­¥å¥ê¥Æ¥£¥Û¡¼¥ë¤Î±Æ¶Á¤ò¸º¤é¤¹¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£"
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "»ÄÇ°¤Ê¤³¤È¤Ë¡¢Æø¢Ê¬Î¥¤Ï PAM ¤Ë°­±Æ¶Á¤òÍ¿¤¨¤Þ¤¹¡£root ¤Ç¼Â¹Ô¤µ¤ì¤ë¤¹¤Ù¤Æ"
+#~ "¤Î PAM ¥»¥Ã¥·¥ç¥ó¥â¥¸¥å¡¼¥ë (¤¿¤È¤¨¤Ð pam_mkhomedir) ¤ÏÆ°¤«¤Ê¤¯¤Ê¤ê¤Þ¤¹¡£"
+#~ "¤Þ¤¿¡¢PAM ¥­¡¼¥Ü¡¼¥ÉÂÐÏÃŪǧ¾Ú¤âÆ°ºî¤·¤Ê¤¯¤Ê¤ê¤Þ¤¹¡£"
+
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "sshd_config ¥Õ¥¡¥¤¥ë¤òÀ¸À®¤¹¤ë¤³¤È¤òÁªÂò¤·¤¿¤Î¤Ç¡¢¤³¤³¤ÇÆø¢Ê¬Î¥¤òÍ­¸ú¤Ë¤¹"
+#~ "¤ë¤«¤·¤Ê¤¤¤«¤òÁªÂò¤Ç¤­¤Þ¤¹¡£¤³¤ÎÁªÂò¤ÇÆ°ºî¤·¤Ê¤¤ PAM µ¡Ç½¤ò»È¤¤¤¿¤¤¾ì¹ç°Ê"
+#~ "³°¤Ï¡¢¡Ö¤Ï¤¤¡×¤òÁª¤Ö¤Ù¤­¤Ç¤¹¡£"
diff --git a/debian/po/nl.po b/debian/po/nl.po
new file mode 100644
index 000000000..7faed4b34
--- /dev/null
+++ b/debian/po/nl.po
@@ -0,0 +1,318 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh 3.6.1p2-9\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2004-10-28 23:21+0100\n"
+"Last-Translator: Bart Cornelis <cobaco@linux.be>\n"
+"Language-Team: debian-l10n-dutch <debian-l10n-dutch@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=iso-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "Wilt u /usr/lib/ssh-keysign met SUID root installeren?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr ""
+"U heeft de mogelijkheid om het ssh-keysign hulpprogramma te installeren met "
+"de SUID-bit aan."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"Wanneer u de SUID-bit voor ssh-keysign aanzet, krijgt u de mogelijkheid om "
+"de computer-gebaseerde authenticatie van het versie 2 SSH-protocol te "
+"gebruiken."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"Bij twijfel kunt u best met SUID installeren. Indien dit problemen "
+"veroorzaakt kunt u dit altijd later nog veranderen door \"dpkg-reconfigure "
+"ssh\" uit te voeren"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Genereer het nieuwe configuratiebestand"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Deze versie van OpenSSH gebruikt een configuratiebestand dat sterk veranderd "
+"is ten opzichte van dat in Debian 'Potato' (waarvan u lijkt op te "
+"waardereren). Ik kan nu een nieuw, met de nieuwe serverversie werkend, "
+"configuratiebestand (/etc/ssh/sshd.config) voor u genereren. Dit "
+"gegenereerde bestand zal echter de aanpassingen die u wellicht gemaakt had "
+"niet overnemen."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Merk op dat dit nieuwe configuratiebestand de waarde van 'PermitRootLogin' "
+"op 'yes' zet (wat betekent dat iedereen die het root-wachtwoord kent via ssh "
+"rechstreeks als root kan aanmelden). Het is de mening van de pakketbeheerder "
+"dat dit de juiste defaultwaarde is (zie README.Debian.gz voor meer details). "
+"Indien u dit niet wenst kunt u sshd_config handmatig aanpassen en de waarde "
+"op 'no' zetten."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Het wordt ten zeerste aangeraden om mij het nieuwe configuratiebestand voor "
+"u te laten genereren."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "Laat enkel versie 2 van het SSH-protocol toe."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"Deze versie van OpenSSH ondersteunt de veiligere versie 2 van het ssh-"
+"protocol. Uitschakelen van ssh versie 1 wordt aangemoedigd, hoewel dit "
+"dingen op zwakkere machines zal vertragen, en mogelijk verbindingen van "
+"oudere clients (b.v. de ssh-client uit \"potato\") onmogelijk maakt."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"Houd er ook rekening mee dat de sleutels gebruikt voor protocolversie 1 "
+"verschillend zijn, waardoor u deze niet kunt gebruiken indien u enkel "
+"protocolversie 2 verbindingen toelaat."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"Instructies over wat te veranderen in sshd_config om deze instelling later "
+"nog te veranderen, vindt u in /usr/share/doc/ssh/README.Debian.gz."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "Wilt u verder gaan (waarbij u mogelijk actieve ssh sessies afschiet)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"De /etc/init.d/ssh versie die u geïnstalleerd hebt schiet waarschijnlijk "
+"alle lopende sshd-instanties af. Dit is Niet Goed wanneer u deze "
+"opwaardering via een ssh-sessie doet."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"U kunt dit repareren door \"--pidfile /var/run/sshd.pid\" toe te voegen aan "
+"de start-stop-daemon regel in de stop-sectie van het bestand."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr ""
+"OPMERKING: Doorsturen van X11 en Authorisatie is standaard uitgeschakeld."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"Om beveiligingsredenen zijn, in de Debian versie van ssh, ForwardX11 en "
+"ForwardAgent standaard uitgeschakeld."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"U kunt dit, voor vertrouwde servers, inschakelen in de "
+"configuratiebestanden, of met de -X commandoregeloptie."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr "Meer details vindt u in /usr/share/doc/ssh/README.Debian.gz"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"Waarschuwing: rsh-server is geïnstalleerd -- dit is waarschijnlijk geen goed "
+"idee"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"rsh-server geïnstalleerd hebben ondermijnt de beveiliging die u, "
+"waarschijnlijk, net probeerde te verkrijgen door ssh te installeren. We "
+"raden u aan om dat pakket te verwijderen."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr ""
+"Waarschuwing: telnetd is geïnstalleerd -- dit is waarschijnlijk geen goed "
+"idee"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Ik raad u aan om of het telnetd-pakket te verwijderen (indien u geen "
+"telnettoegang hoeft aan te bieden), of telnetd-ssl te installeren zodat er "
+"enige kans is dat telnetsessies geen onversleutelde gebruikersnaam/"
+"wachtwoord en sessie informatie over het netwerk versturen."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "Waarschuwing: u dient een nieuwe computersleutel aan te maken"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Er is een oude IDEA-versleutelde /etc/ssh/ssh_host_key aanwezig. OpenSSH kan "
+"dit computersleutelbestand niet aan, en ik kan het ssh-keygen programma van "
+"de oude (niet-vrije) SSH installatie niet vinden."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "Het zal nodig zijn om een nieuwe computersleutel te genereren"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr "Challenge-response-authenticatie deactiveren?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"Zo te zien is wachtwoord-authenticatie momenteel gedeactiveert in uw OpenSSH-"
+"serverconfiguratie. Om te voorkomen dat gebruikers met recente versies van "
+"OpenSSH inloggen met behulp van wachtwoorden (mogelijk door in plaats "
+"daarvan enkel publieke-sleutel authenticatie te gebruiken) dient challenge-"
+"response-authenticatie gedeactiveerd te woren. Zoniet dient u ervoor te "
+"zorgen dat uw PAM-configuratie geen Unix 'password'-bestand-authenticatie "
+"toe laat."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Wanneer u challenge-response-authenticatie deactiveerd kunnen gebruikers "
+"niet meer inloggen met behulp van wachtwoorden. Als u het geactiveerd laat "
+"(de standaarwaarde) zal de 'PasswordAuthentication no' optie geen (nuttig) "
+"effect hebben tenzij u ook de PAM-configuratie aanpast in /etc/pam.d/ssh."
diff --git a/debian/po/pl.po b/debian/po/pl.po
new file mode 100644
index 000000000..530f1668f
--- /dev/null
+++ b/debian/po/pl.po
@@ -0,0 +1,420 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2004-04-08 18:28+0200\n"
+"Last-Translator: Emil Nowak <emil5@go2.pl>\n"
+"Language-Team: Polish <translation-team-pl@lists.sourceforge.net>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-2\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "Czy chcesz aby /usr/lib/ssh-keysign by³ zainstalowany jako SUID root?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr ""
+"Masz mo¿liwo¶æ zainstalowania pomocniczego programu ssh-keysign z w³±czonym "
+"bitem SETUID."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"Je¶li uczynisz ssh-keysign SUIDowym, bêdziesz móg³ u¿ywaæ opartej na hostach "
+"autoryzacji drugiej wersji protoko³u SSH."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"Je¶li masz w±tpliwo¶ci, radzê zainstalowaæ go z SUIDem. Je¶li to sprawia "
+"problemy, mo¿esz zmieniæ swoje zdanie uruchamiaj±c pó¼niej polecenie: dpkg-"
+"reconfigure ssh"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Wygeneruj nowy plik konfiguracyjny"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"W tej wersji OpenSSH zmieni³ siê plik konfiguracyjny w stosunku do wersji "
+"dostarczanej z Debianem 'Potato', któr± zdajesz siê aktualizowaæ. Mogê teraz "
+"wygenerowaæ nowy plik konfiguracyjny (/etc/ssh/sshd.config), który bêdzie "
+"dzia³a³ z now± wersj± serwera, ale nie bêdzie zawiera³ ¿adnych dokonanych "
+"przez ciebie w starej wersji zmian."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Zauwa¿ proszê, ¿e nowy plik konfiguracyjny bêdzie ustawia³ warto¶æ opcji "
+"'PermitRootLogin' na 'tak' (co oznacza, ¿e ka¿dy kto zna has³o root'a mo¿e "
+"zdalnie zalogowaæ siê przez ssh jako root). W opinii opiekuna pakietu to "
+"jest poprawna warto¶æ domy¶lna (szczegó³y w README.Debian), ale mo¿esz sobie "
+"wyedytowaæ sshd_config i ustawiæ tê opcjê na 'nie' je¶li siê z t± opini± nie "
+"zgadzasz."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Jest bardzo wskazane aby¶ pozwoli³ mi wygenerowaæ nowy plik konfiguracyjny."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "Zezwalaj wy³±cznie na wersjê 2 protoko³u SSH"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"Ta wersja OpenSSH wspiera drug± wersjê protoko³u ssh, która jest znacznie "
+"bardziej bezpieczna. Wy³±czenie ssh 1 jest zalecane, choæ spowalnia to "
+"dzia³anie na starych maszynach i mo¿e uniemo¿liwiæ po³±czenie starszym "
+"wersjom klientów (dotyczy to np. klienta ssh do³±czanego do \"potato\")."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"Ponadto, zauwa¿ proszê, ¿e klucze u¿ywane przez protokó³ 1 s± inne, wiêc nie "
+"bêdziesz móg³ ich u¿ywaæ je¶li zezwolisz na korzystanie wy³±cznie z wersji 2 "
+"protoko³u."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"Je¶li pó¼niej zmienisz zdanie co do tego ustawienia, to instrukcje co "
+"zmieniæ w sshd_config znajduj± siê w README.Debian."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "Czy chcesz kontynuowaæ (i ryzykowaæ przerwaniem aktywnych sesji ssh) ?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Zainstalowana w³a¶nie wersja /etc/init.d/ssh mo¿e zabiæ wszystkie dzia³aj±ce "
+"obecnie kopie sshd. Je¶li wykonujesz t± aktualizacjê przez ssh, to by³aby "
+"Z³a Rzecz(tm)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Mo¿esz to naprawiæ dodaj±c \"--pidfile /var/run/sshd.pid\" do linijki start-"
+"stop-daemon w sekcji stop tego pliku."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr ""
+"UWAGA: Przekazywanie (forwarding) X11 i Autoryzacji jest domy¶lnie wy³±czone."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"Ze wzglêdów bezpieczeñstwa Debianowa wersja ssh ma ForwardX11 i ForwardAgent "
+"ustawione  domy¶lnie na 'off'."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"Dla zaufanych serwerów mo¿esz w³±czyæ te opcje w pliku konfiguracyjnym lub "
+"przy pomocy opcji -X z linii komend."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr "Wiêcej szczegó³ów znajdziesz w /usr/share/doc/ssh/README.Debian."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"Uwaga: serwer rsh jest zainstalowany --- prawdopodobnie nienajlepszy pomys³"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Posiadanie zainstalowanego serwera rsh podminowuje zabezpieczenia, które "
+"prawdopodobnie starasz siê uzyskaæ instaluj±c ssh. Radzi³bym usun±æ ten "
+"pakiet."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr ""
+"Uwaga: telnetd jest zainstalowany --- prawdopodobnie nienajlepszy pomys³"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Radzi³bym albo usun±æ pakiet telnetd (je¶li nie potrzebujesz koniecznie "
+"udostêpniaæ telnet'a) albo zainstalowaæ telnetd-ssl aby by³a choæ szansza, "
+"¿e sesje telnet nie bêd± przesy³aæ niezaszyfrowanego loginu/has³a oraz "
+"danych sesji przez sieæ."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "Uwaga: musisz utworzyæ nowy klucz hosta"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Istnieje stary /etc/ssh/ssh_host_key, który jest zaszyfrowany przez IDEA. "
+"OpenSSH nie umie korzystaæ z tak zaszyfrowanego klucza, a nie mo¿e znale¼æ "
+"polecenia ssh-keygen ze starego SSH (non-free)."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "Bêdziesz musia³ wygenerowaæ nowy klucz hosta."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "klucze ssh2 w³±czone do plików konfiguracyjnych"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "Pocz±wszy od wersji 3 OpenSSH nie u¿ywa ju¿ osobnych plików dla kluczy "
+#~ "ssh1 i ssh2. Oznacza to, ¿e pliki authorized_keys2 i known_hosts2 nie s± "
+#~ "ju¿ potrzebne. Bêd± one jednak odczytywane aby zachowaæ wsteczn± "
+#~ "kompatybilno¶æ."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Czy chcesz uruchamiaæ serwer sshd ?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Ten pakiet zawiera zarówno klienta ssh, jak i serwer sshd."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Normalnie serwer sshd (Secure Shell Server) bêdzie uruchomiony aby "
+#~ "umo¿liwiæ zdalny dostêp przez ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Je¶li jeste¶ zainteresowany u¿ywaniem wy³±cznie klienta ssh dla po³±czeñ "
+#~ "wychodz±cych z tej maszyny, i nie chcesz siê na ni± logowaæ przy pomocy "
+#~ "ssh, to mo¿esz teraz wy³±czyæ serwer sshd."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Odradzamy stosowanie ustawieñ ¶rodowiskowych dla kluczy."
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "Ta wersja OpenSSH ma wy³±czon± opcjê wykorzystywania ustawieñ "
+#~ "¶rodowiskowych dla kluczy publicznych. Mo¿na dziêki temu unikn±æ pewnych "
+#~ "ataków (jak np.: LD_PRELOAD). Je¿eli u¿ywasz tej opcji w pliku "
+#~ "authorized_keys, to zawarte w nim klucze nie bêd± dzia³aæ dopóki ta opcja "
+#~ "nie zostanie usuniêta."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Aby ponownie w³±czyæ tê opcjê, nale¿y dodaæ wpis \"PermitUserEnvironment "
+#~ "yes\" do pliku /etc/ssh/sshd_config po ukoñczeniu aktualizacji. Przy "
+#~ "zmianie konfiguracji nale¿y zapoznaæ siê z informacjami zawartymi na "
+#~ "stronie podrêcznika systemowego sshd_config(5)."
+
+#~ msgid "Privilege separation"
+#~ msgstr "Separacja uprawnieñ"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "Separacja uprawnieñ jest domy¶lnie w³±czona, wiêc je¶li zdecydujesz siê "
+#~ "j± wy³±czyæ, musisz dodaæ \"UsePrivilegeSeparation no\" do pliku /etc/ssh/"
+#~ "sshd_config."
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "W³±czenie separacji uprawnieñ"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "Ta wersja OpenSSH zawiera now± opcjê separacji uprawnieñ. Znacz±co "
+#~ "zmniejsza ona ilo¶æ kodu, który jest uruchamiany jako root i co za tym "
+#~ "idzie redukuje efekty luk bezpieczeñstwa w sshd."
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "Niestety separacja uprawnieñ ¼le reaguje z PAMem. Jakikolwiek modu³ sesji "
+#~ "PAM, który musi byæ uruchamiany jako root (pam_mkhomedir, na przyk³ad) "
+#~ "zawiedzie. Nie bêdzie dzia³aæ równie¿ interaktywna autentykacja z "
+#~ "klawiatury (keyboard-interactive authentication)."
+
+#, fuzzy
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "Zdecydowa³e¶ siê na to abym wygenerowa³ dla ciebie plik sshd_config, i "
+#~ "mo¿esz wybraæ czy chcesz w³±czyæ Separacjê Uprawnieñ, czy te¿ nie. Je¶li "
+#~ "nie u¿ywasz j±dra z serii 2.0 (w którym to przypadku *musisz* "
+#~ "odpowiedzieæ tutaj 'nie' albo sshd w ogóle nie ruszy) i je¶li nie musisz "
+#~ "korzystaæ z mo¿liwo¶ci PAMa, które nie bêd± dzia³a³y z t± opcj±, "
+#~ "powiniene¶ odpowiedzieæ tutaj 'tak'."
+
+#~ msgid ""
+#~ "NB! If you are running a 2.0 series Linux kernel, then privilege "
+#~ "separation will not work at all, and your sshd will fail to start unless "
+#~ "you explicitly turn privilege separation off."
+#~ msgstr ""
+#~ "UWAGA! Je¿eli u¿ywasz j±dra Linux'a z serii 2.0, to separacja uprawnieñ w "
+#~ "ogóle nie bêdzie dzia³aæ i sshd nie wystartuje dopóki w³asnorêcznie nie "
+#~ "wy³±czysz separacji uprawnieñ w /etc/ssh/sshd_config."
diff --git a/debian/po/pt_BR.po b/debian/po/pt_BR.po
new file mode 100644
index 000000000..4df5c2766
--- /dev/null
+++ b/debian/po/pt_BR.po
@@ -0,0 +1,425 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh_3.6.1p2-9\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2003-11-09 16:29-0300\n"
+"Last-Translator: André Luís Lopes <andrelop@debian.org>\n"
+"Language-Team: Debian-BR Project <debian-l10n-portuguese@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "Deseja que que /usr/lib/ssh-keysign seja instalado SUID root ?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr ""
+"Existe a opção de instalar o cliente auxiliar ssh-keysign com o bit SUID "
+"definido."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"Caso você instale o ssh-keysign com o bit SUID ativado, você será capaz de "
+"usar a autenticação baseada em host do protocolo SSH 2."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"Caso esteja em dúvida, é sugerido que você instale com o bit SUID ativado. "
+"Caso isso cause problemas e você mude de idéia posteriormente execute o "
+"comando : dpkg-reconfigure ssh"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Gerar novo arquivo de configuração"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Esta versão do OpenSSH possui um arquivo de configuração consideravelmente "
+"diferente da versão fornecida com o Debian 'Potato' (Debian versão 2.2), a "
+"versão do Debian da qual você parece estar atualizando. Esse assistente de "
+"confgiuração inicial pode agora gerar um novo arquivo de configuração (/etc/"
+"ssh/sshd_config) que irá funcionar com o nova versão do servidor sshd mas "
+"não irá conter nenhuma personalização que você possa ter feito na versão "
+"anterior."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Por favor note que este novo arquivo de configuração irá definir o valor da "
+"opção 'PermitRootLogin' para \"yes\" (o que significa que qualquer pessoa "
+"que conheça a senha de root poderá conectar via ssh diretamente como root no "
+"servidor onde este pacote esta sendo instalado). A opinião do mantenedor do "
+"pacote é que esse é o comportamente padrão correto (consulte o arquivo "
+"README.Debian deste pacote para maiores detalhes), mas você poderá sempre "
+"editar o arquivo sshd_config e definir esta opção para \"no\" caso você não "
+"concorde com o mantenedor do OpenSSH."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"É fortemente recomendado que você permita que o novo arquivo de configuração "
+"será gerado automaticamente para você."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "Permitir somente protocolo SSH versão 2"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"Esta versão do OpenSSH suporta a versão 2 do protocolo ssh, a qual é muito "
+"mais segura que a versão anterior. É recomendado desabilitar o suporte ao "
+"protocolo ssh versão 1, porém isto fará com que conexões fiquem mais lentas "
+"em máquinas mais antigas e pode impedir que clientes antigos consigam se "
+"conectar (o cliente ssh fornecido com a versão do Debian 2.2 \"potato\" é "
+"afetada.)"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"Por favor note também que as chaves usadas para o protocolo 1 são diferentes "
+"portanto você não poderá usá-las caso você somente permita conexões usando o "
+"protocolo 2."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"Caso você posteriormente mude de idéia sobre esta configuração, o arquivo "
+"README.Debian deste pacote possui instruções sobre o que mudar em seu "
+"arquivo de configuração sshd_config."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "Deseja continuar (e arriscar acabar com sessões ssh ativas) ?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"A versão de /etc/init.d/ssh que você possui instalada está prestes a matar "
+"todas as instâncias sshd sendo executadas. Se você está fazendo esta "
+"atualização através de uma sessão ssh, isto seria uma Coisa Ruim(tm)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Você pode corrigir isto adicionando \"--pidfile /var/run/sshd.pid\" na linha "
+"start-stop-daemon na seção stop deste arquivo."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr "NOTA: Encaminhamento de X11 e Autorização desabilitados por padrão."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"Por razôes de segurança, a versão Debian do ssh tem as opções ForwardX11 e "
+"ForwardAgent definidas como ``off'' por padrão."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"Você pode habilitar isso para servidores que você confia, ou em um dos "
+"arquivos de configuração, ou com a opção de linha de comando -X."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr ""
+"Maiores detalhes podem ser encontrados em /usr/share/doc/ssh/README.Debian."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Aviso: rsh-server está instalado --- provavelmente não é uma boa idéia"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Possuir o rsh-server instalado minará a segurança que você estava "
+"provavelmente querendo obter instalando o ssh. Eu recomendaria a você "
+"remover este pacote."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Aviso: telnetd está instalado --- provavelmente não é uma boa idéia"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Eu recomendaria a você ou remover o pacote telnetd (se você atualmente não "
+"precisa oferecer acesso telnet) ou instalar telnetd-ssl. Assim existe pelo "
+"menos uma chance das sessões telnet não enviarem login/senha não encriptados "
+"e informações de sessão através da rede."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "Aviso: você deve criar uma nova host key"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Existe uma antiga /etc/ssh/ssh_host_key, a qual é encriptada usando IDEA. O "
+"OpenSSH não pode gerenciar este arquivo host key e eu não consigo encontrar "
+"o utilitário ssh-keygen da antiga (non-free) instalação SSH."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "Você precisará gerar uma nova host key."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "Chaves ssh2 incluídas nos arquivos de configuração"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "A partir do versão 3 o OpenSSH não usa mais arquivos separados para as "
+#~ "chaves ssh1 e ssh2. Isto significa que os arquivos \"authorized_keys2\" e "
+#~ "\"know_hosts2\" não são mais necessários. Os mesmos continuarão a ser "
+#~ "lidos para manter a compatibilidade com versões anteriores."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Você deseja executar o servidor sshd ?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Este pacote contém ambos o cliente ssh e o servidor sshd."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Normalmente o sshd Secure Shell Server será executado para permitir "
+#~ "logins remotos via ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Se você está interessado somente em usar o cliente ssh para conexões para "
+#~ "fora desta máquina, e não quer logar na mesma usando ssh, então você pode "
+#~ "desabilitar o sshd aqui."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Opções ed ambiente sobre chaves estão obsoletas"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "Esta versão do OpenSSH desabilita a opção de ambiente para chaves "
+#~ "públicas por padrão par evitar certos ataques (por exemplo, LD_PRELOAD). "
+#~ "Caso você esteja usando esta opção em um arquivo authorized_keys, tenha "
+#~ "cuidado pois as chaves em questão não irão mais funcionar até que esta "
+#~ "opção seja removida."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Para reabilitar esta opção, defina a opção \"PermitUserEnvironment yes\" "
+#~ "no arquivo /et/ssh/sshd_config depois da a atualização terminar, "
+#~ "atentando para o aviso na página de manual do sshd_config(5)."
+
+#~ msgid "Privilege separation"
+#~ msgstr "Separação de Previlégios"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "A separação de previlégios está habilitado por padrão, portanto caso você "
+#~ "decida que deseja desabilitá-la você precisará adicionar a linha "
+#~ "\"UsePrivilegeSeparation no\" ao arquivo /etc/ssh/sshd_config."
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "Habilitar Separação de Privilégios"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "Esta versão do OpenSSH contém a nova opção de separação de privilégios. "
+#~ "Esta opção reduz significativamente a quantidade de código que é "
+#~ "executada como root e portanto reduz o impacto de falhas de segurança no "
+#~ "sshd."
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "Infelizmente, a separação de privilégios interage de maneira ruim com o "
+#~ "PAM. Quaisquer módulos de sessão PAM que precisem ser executados como "
+#~ "root (pam_mkhomedir, por exemplo) irão falhar e autenticação interativa "
+#~ "com teclado do PAM não funcionará."
+
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "Uma vez que você optou por permitir que o debconf gere um arquivo "
+#~ "sshd_config para você, é possível escolher se você deseja ter ou não o "
+#~ "recurso de separação de privilégios habilitado. A menos que você saiba "
+#~ "que utiliza recursos PAM que não funcionarão com esta opção habilitada, "
+#~ "você deverá habilitar esse recurso."
+
+#~ msgid ""
+#~ "NB! If you are running a 2.0 series Linux kernel, then privilege "
+#~ "separation will not work at all, and your sshd will fail to start unless "
+#~ "you explicitly turn privilege separation off."
+#~ msgstr ""
+#~ "NB ! Caso você esteja executando um kernel Linux da séria 2.0 o recurso "
+#~ "de separação de privilégios não funcionará e seu daemon sshd irá falhar "
+#~ "ao iniciar a menos que você explicitamente desabilite o recurso de "
+#~ "separação de privilégios."
diff --git a/debian/po/ru.po b/debian/po/ru.po
new file mode 100644
index 000000000..43af92834
--- /dev/null
+++ b/debian/po/ru.po
@@ -0,0 +1,403 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2003-10-02 17:20+0500\n"
+"Last-Translator: Ilgiz Kalmetev <translator@ilgiz.pp.ru>\n"
+"Language-Team: russian <ru@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=KOI8-R\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "èÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ /usr/lib/ssh-keysign ËÁË SUID root?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr "÷Ù ÉÍÅÅÔÅ ×ÏÚÍÏÖÎÏÓÔØ ÕÓÔÁÎÏ×ÉÔØ ÂÉÔ SUID ÄÌÑ ÕÔÉÌÉÔÙ ssh-keysign."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"åÓÌÉ ×Ù ÕÓÔÁÎÏ×ÉÔÅ ÂÉÔ SUID ÄÌÑ ssh, ÔÏ ×Ù ÓÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÈÏÓÔÏ×ÕÀ "
+"ÁÕÔÅÎÔÉÆÉËÁÃÉÀ ÄÌÑ SSH-ÐÒÏÔÏËÏÌÁ ×ÅÒÓÉÉ 2."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"åÓÌÉ ÷Ù ÎÅ ÚÎÁÅÔÅ, ÞÔÏ ×ÙÂÒÁÔØ, ÔÏ ÒÅËÏÍÅÎÄÕÀ ÕÓÔÁÎÏ×ÉÔØ SUID ÄÌÑ ssh. ÷ "
+"ÄÁÌØÎÅÊÛÅÍ, ÷Ù ÍÏÖÅÔÅ ÉÚÍÅÎÉÔØ Ó×ÏÊ ×ÙÂÏÒ ËÏÍÁÎÄÏÊ: dpkg-reconfigure ssh"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "óÇÅÎÅÒÉÒÏ×ÁÔØ ÎÏ×ÙÊ ËÏÎÆÉÇÕÒÁÃÉÏÎÎÙÊ ÆÁÊÌ"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"÷ ÜÔÏÊ ×ÅÒÓÉÉ OpenSSH ÚÎÁÞÉÔÅÌØÎÏ ÐÅÒÅÒÁÂÏÔÁÎ ÆÁÊÌ ÎÁÓÔÒÏÅË, × ÏÔÌÉÞÉÉ ÏÔ  "
+"×ÅÒÓÉÉ, ËÏÔÏÒÁÑ ÐÏÓÔÁ×ÌÑÌÁÓØ Ó Debian 'Potato', É ËÏÔÏÒÕÀ ÷Ù, ËÁÖÅÔÓÑ, "
+"ÏÂÎÏ×ÌÑÅÔÅ. ñ ÍÏÇÕ ÓÇÅÎÅÒÉÒÏ×ÁÔØ ÄÌÑ ÷ÁÓ ÎÏ×ÙÊ ÆÁÊÌ ÎÁÓÔÒÏÅË (/etc/ssh/sshd."
+"config), ËÏÔÏÒÙÊ ÂÕÄÅÔ ÒÁÂÏÔÁÔØ Ó ÎÏ×ÏÊ ×ÅÒÓÉÅÊ ÓÅÒ×ÅÒÁ, ÎÏ ÎÅ ÂÕÄÅÔ "
+"ÓÏÄÅÒÖÁÔØ ÎÁÓÔÒÏÅË, ËÏÔÏÒÙÅ ÷Ù ÓÄÅÌÁÌÉ × ÓÔÁÒÏÊ ×ÅÒÓÉÉ."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"ïÂÒÁÔÉÔÅ ×ÎÉÍÁÎÉÅ ÎÁ ÔÏ, ÞÔÏ ÜÔÏÔ ÎÏ×ÙÊ ÆÁÊÌ ÎÁÓÔÒÏÅË ÕÓÔÁÎÏ×ÉÔ ÚÎÁÞÅÎÉÅ "
+"ÐÁÒÁÍÅÔÒÁ 'PermitRootLogin' × yes (ÏÚÎÁÞÁÀÝÅÇÏ, ÞÔÏ ÌÀÂÏÊ ÞÅÌÏ×ÅË, ÚÎÁÀÝÉÊ "
+"ÐÁÒÏÌØ ÓÕÐÅÒÐÏÌØÚÏ×ÁÔÅÌÑ ÍÏÖÅÔ ×ÏÊÔÉ × ÓÉÓÔÅÍÕ ÞÅÒÅÚ ssh). ðÏ ÍÎÅÎÉÀ "
+"ÓÏÐÒÏ×ÏÖÄÁÀÝÅÇÏ ÜÔÏÇÏ ÐÁËÅÔÁ - ÜÔÏ ÒÁÚÕÍÎÏ, ÎÏ ÷Ù ×ÓÅÇÄÁ ÍÏÖÅÔÅ ÕÓÔÁÎÏ×ÉÔØ "
+"ÚÎÁÞÅÎÉÅ ÜÔÏÇÏ ÐÁÒÁÍÅÔÒÁ × ÆÁÊÌÅ sshd_config ÔÁË, ËÁË ÷ÁÍ ËÁÖÅÔÓÑ ÐÒÁ×ÉÌØÎÙÍ."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"îÁÓÔÏÑÔÅÌØÎÏ ÒÅËÏÍÅÎÄÕÅÔÓÑ, ÒÁÚÒÅÛÉÔØ ÓÇÅÎÅÒÉÒÏ×ÁÔØ ÄÌÑ ÷ÁÓ ÎÏ×ÙÊ ÆÁÊÌ "
+"ÎÁÓÔÒÏÅË."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "òÁÚÒÅÛÉÔØ ÉÓÐÏÌØÚÏ×ÁÎÉÅ ÔÏÌØËÏ SSH-ÐÒÏÔÏËÏÌÁ ×ÅÒÓÉÉ 2."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"üÔÁ ×ÅÒÓÉÑ OpenSSH ÐÏÄÄÅÒÖÉ×ÁÅÔ ÐÒÏÔÏËÏÌ ssh ×ÅÒÓÉÉ 2, ËÏÔÏÒÙÊ ÏÂÅÓÐÅÞÉ×ÁÅÔ "
+"ÂÏÌØÛÕÀ ÓÔÅÐÅÎØ ÚÁÝÉÔÙ. ìÕÞÛÅ ÚÁÐÒÅÔÉÔØ ÐÒÏÔÏËÏÌ ×ÅÒÓÉÉ 1, ÎÏ ÜÔÏ ÍÏÖÅÔ "
+"ÐÒÉ×ÅÓÔÉ Ë ÚÁÍÅÄÌÅÎÉÀ ÒÁÂÏÔÙ ÍÁÌÏÐÒÏÉÚ×ÏÄÉÔÅÌØÎÙÈ ÍÁÛÉÎ É ÍÏÖÅÔ ÓÄÅÌÁÔØ "
+"ÎÅ×ÏÚÍÏÖÎÙÍ ÐÏÄËÌÀÞÅÎÉÅ Ó ÐÏÍÏÝØÀ ÓÔÁÒÙÈ ËÌÉÅÎÔÓËÉÈ ÐÒÏÇÒÁÍÍ (× ÞÁÓÔÎÏÓÔÉ, "
+"ÜÔÏ ÏÔÎÏÓÉÔÓÑ Ë ËÌÉÅÎÔÕ ssh, ÐÏÓÔÁ×ÌÑÅÍÏÇÏ Ó \"potato\"."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"ïÂÒÁÔÉÔÅ ×ÎÉÍÁÎÉÅ ÎÁ ÔÏ, ÞÔÏ ËÌÀÞÉ ÄÌÑ ÐÒÏÔÏËÏÌÁ ×ÅÒÓÉÉ 1 ÉÍÅÀÔ ÄÒÕÇÏÊ "
+"ÆÏÒÍÁÔ, É ÐÏÜÔÏÍÕ ÷Ù ÎÅ ÓÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÉÈ, ÅÓÌÉ ÒÁÚÒÅÛÉÔÅ ÔÏÌØËÏ "
+"ÓÏÅÄÉÎÅÎÉÑ ÐÏ ÐÒÏÔÏËÏÌÕ ×ÅÒÓÉÉ 2."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"åÓÌÉ ÐÏÚÖÅ ÷Ù ÉÚÍÅÎÉÔÅ Ó×ÏÅ ÍÎÅÎÉÅ, ÔÏ × ÆÁÊÌÅ README.Debian ÓÏÄÅÒÖÁÔÓÑ "
+"ÉÎÓÔÒÕËÃÉÉ Ï ÔÏÍ, ÞÔÏ ÎÕÖÎÏ ÓÄÅÌÁÔØ × ÆÁÊÌÅ sshd_config."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "÷Ù ÈÏÔÉÔÅ ÐÒÏÄÏÌÖÉÔØ (ÒÉÓËÕÑ ÐÏÔÅÒÑÔØ ÁËÔÉ×ÎÙÅ ssh-ÓÏÅÄÉÎÅÎÉÑ)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"÷ÅÒÓÉÑ  /etc/init.d/ssh,  ËÏÔÏÒÕÀ  ×Ù  ÕÓÔÁÎÁ×ÌÉ×ÁÅÔÅ, ÍÏÖÅÔ ÕÂÉÔØ ×ÓÅ "
+"ÚÁÐÕÝÅÎÎÙÅ  ÐÒÏÃÅÓÓÙ  ssh.  åÓÌÉ ×Ù ÏÓÕÝÅÓÔ×ÌÑÅÔÅ ÜÔÏ ÏÂÎÏ×ÌÅÎÉÅ ÞÅÒÅÚ ssh "
+"ÓÅÓÓÉÀ, ÔÏ ÜÔÏ ðÌÏÈÁÑ ÷ÅÝØ (tm)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"üÔÏ ÍÏÖÎÏ ÉÓÐÒÁ×ÉÔØ ÄÏÂÁ×ÌÅÎÉÅÍ \"--pidfile /var/run/sshd.pid\" × ÓÔÒÏËÅ "
+"start-stop-daemon × ÒÁÚÄÅÌÅ stop ÜÔÏÇÏ ÆÁÊÌÁ."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr "ðòéíåþáîéå: æÏÒ×ÁÒÄÉÎÇ X11 É Authorization ÚÁÐÒÅÝÅÎ ÐÏ ÕÍÏÌÞÁÎÉÀ."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"ðÏ ÐÒÉÞÉÎÁÍ ÂÅÚÏÐÁÓÎÏÓÔÉ, × ×ÅÒÓÉÉ ÄÌÑ Debian ssh ÉÍÅÅÔ ForwardX11 É "
+"ForwardAgent ÕÓÔÁÎÏ×ÌÅÎÎÙÍÉ × ``off'' ÐÏ ÕÍÏÌÞÁÎÉÀ."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"÷Ù ÍÏÖÅÔÅ ÒÁÚÒÅÛÉÔØ ÉÈ ÄÌÑ ÓÅÒ×ÅÒÏ×, ËÏÔÏÒÙÍ ÄÏ×ÅÒÑÅÔÅ ÌÉÂÏ × ÏÄÎÏÍ ÉÚ "
+"ÎÁÓÔÒÏÅÞÎÙÈ ÆÁÊÌÏ×, ÉÌÉ ÐÁÒÁÍÅÔÒÏÍ ËÏÍÁÎÄÎÏÊ ÓÔÒÏËÉ -X."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr ""
+"äÏÐÏÌÎÉÔÅÌØÕÀ ÉÎÆÏÒÍÁÃÉÀ ÍÏÖÎÏ ÎÁÊÔÉ × /usr/share/doc/ssh/README.Debian"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "ðÒÅÄÕÐÒÅÖÄÅÎÉÅ: ÕÓÔÁÎÏ×ÌÅÎ rsh-server --- ÐÏÖÁÌÕÊ, ÜÔÏ ÎÅ ÏÞÅÎØ ÈÏÒÏÛÏ"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"õÓÔÁÎÏ×ÌÅÎÎÙÊ rsh-ÓÅÒ×ÅÒ ÓÎÉÖÁÅÔ ÂÅÚÏÐÁÓÎÏÓÔØ, ËÏÔÏÒÕÀ ÷Ù ×ÅÒÏÑÔÎÏ ÈÏÔÉÔÅ "
+"ÐÏ×ÙÓÉÔØ ÕÓÔÁÎÁ×ÌÉ×ÁÑ ssh. òÅËÏÍÅÎÄÕÅÔÓÑ ÕÄÁÌÉÔØ ÜÔÏÔ ÐÁËÅÔ."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "ðÒÅÄÕÐÒÅÖÄÅÎÉÅ: ÕÓÔÁÎÏ×ÌÅÎ telnetd --- ÐÏÖÁÌÕÊ, ÜÔÏ ÎÅ ÏÞÅÎØ ÈÏÒÏÛÏ"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"ñ ÒÅËÏÍÅÎÄÏ×ÁÌ ÂÙ ÷ÁÍ ÕÄÁÌÉÔØ ÐÁËÅÔ telnetd (ÅÓÌÉ ÷ÁÍ ÄÅÊÓÔ×ÉÔÅÌØÎÏ ÎÅ ÎÕÖÅÎ "
+"ÄÏÓÔÕÐ telnet) ÉÌÉ ÕÓÔÁÎÏ×ÉÔØ telnet-ssl, ÞÔÏÂÙ ÉÍÅÔØ ÈÏÔÑ ÂÙ ×ÏÚÍÏÖÎÏÓÔØ ÎÅ "
+"ÐÅÒÅÄÁ×ÁÔØ ÐÏ ÓÅÔÉ ÎÅÚÁÛÉÆÒÏ×ÁÎÎÙÅ ÉÍÅÎÁ É ÐÁÒÏÌÉ ÐÏÌØÚÏ×ÁÔÅÌÅÊ É ÐÒÏÞÕÀ "
+"ÉÎÆÏÒÍÁÃÉÀ × telnet-ÓÅÓÓÉÑÈ."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "ðÒÅÄÕÐÒÅÖÄÅÎÉÅ: ÷Ù ÄÏÌÖÎÙ ÓÏÚÄÁÔØ ÎÏ×ÙÊ ÈÏÓÔÏ×ÙÊ ËÌÀÞ."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"îÁÊÄÅÎ ÓÔÁÒÙÊ /etc/ssh/ssh_host_key, ËÏÔÏÒÙÊ ÚÁÛÉÆÒÏ×ÁÎ IDEA. OpenSSH ÎÅ "
+"ÍÏÖÅÔ ÒÁÂÏÔÁÔØ Ó ÜÔÉÍ ÈÏÓÔÏ×ÙÍ ËÌÀÞÏÍ, É Ñ ÎÅ ÍÏÇÕ ÎÁÊÔÉ ÕÔÉÌÉÔÕ ssh-keygen "
+"ÏÔ ÓÔÁÒÏÊ (ÎÅÓ×ÏÂÏÄÎÏÊ) ÉÎÓÔÁÌÌÑÃÉÉ SSH."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "÷ÁÍ ÎÁÄÏ ÂÕÄÅÔ ÓÇÅÎÅÒÉÒÏ×ÁÔØ ÎÏ×ÙÊ ËÌÀÞ ÈÏÓÔÁ."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "ëÌÀÞÉ ssh2 ÄÏÂÁ×ÌÅÎÙ × ÆÁÊÌÙ ÎÁÓÔÒÏÅË"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "îÁÞÉÎÁÑ Ó ×ÅÒÓÉÉ 3 OpenSSH ÎÅ ÐÏÄÄÅÒÖÉ×ÁÅÔ ÒÁÚÄÅÌØÎÙÅ ÆÁÊÌÙ ÄÌÑ ËÌÀÞÅÊ "
+#~ "ssh1 É ssh2. üÔÏ ÏÚÎÁÞÁÅÔ, ÞÔÏ ÆÁÊÌÙ authorized_keys2 É known_hosts2 "
+#~ "ÂÏÌØÛÅ ÎÅ ÎÕÖÎÙ. ðÒÏÇÒÁÍÍÁ ÐÏ-ÐÒÅÖÎÅÍÕ ÂÕÄÅÔ ÉÈ ÓÞÉÔÙ×ÁÔØ ÄÌÑ ÏÂÅÓÐÅÞÅÎÉÑ "
+#~ "ÏÂÒÁÔÎÏÊ ÓÏ×ÍÅÓÔÉÍÏÓÔÉ."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "èÏÔÉÔÅ ÚÁÐÕÓÔÉÔØ ÓÅÒ×ÅÒ sshd?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "üÔÏÔ ÐÁËÅÔ ÓÏÄÅÒÖÉÔ É ssh-ËÌÉÅÎÔ, É ssh-ÓÅÒ×ÅÒ."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "ïÂÙÞÎÏ sshd Secure Shell Server ÚÁÐÕÓËÁÅÔÓÑ ÄÌÑ ÕÄÁÌÅÎÎÏÇÏ ×ÈÏÄÁ × "
+#~ "ÓÉÓÔÅÍÕ ÞÅÒÅÚ ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "åÓÌÉ ×ÁÓ ÉÎÔÅÒÅÓÕÅÔ ÔÏÌØËÏ ÉÓÐÏÌØÚÏ×ÁÎÉÅ ssh-ËÌÉÅÎÔÁ ÄÌÑ ÉÓÈÏÄÑÝÉÈ "
+#~ "ÓÏÅÄÉÎÅÎÉÊ Ó ÜÔÏÊ ÍÁÛÉÎÙ, É ×Ù ÎÅ ÈÏÔÉÔÅ ×ÈÏÄÉÔØ × ÅÅ ÓÉÓÔÅÍÕ ÞÅÒÅÚ ssh, "
+#~ "ÔÏ ÓÅÊÞÁÓ ÷Ù ÍÏÖÅÔÅ ÚÁÐÒÅÔÉÔØ sshd."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "ïÐÃÉÉ ÏËÒÕÖÅÎÉÑ ÄÌÑ ËÌÀÞÅÊ ÂÙÌÉ ÚÁÐÒÅÝÅÎÙ"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "üÔÁ ×ÅÒÓÉÑ OpenSSH ÐÏ ÕÍÏÌÞÁÎÉÀ ÚÁÐÒÅÝÁÅÔ ÏÐÃÉÀ ÏËÒÕÖÅÎÉÑ ÄÌÑ ÐÕÂÌÉÞÎÙÈ "
+#~ "ËÌÀÞÅÊ, ÞÔÏÂÙ ÉÚÂÅÖÁÔØ ÁÔÁË (ÎÁÐÒÉÍÅÒ, LD_PRELOAD). åÓÌÉ ÷Ù ÉÓÐÏÌØÚÕÅÔÅ "
+#~ "ÜÔÕ ÏÐÃÉÀ × ÆÁÊÌÅ authorized_keys, ÔÏ ÂÕÄØÔÅ ×ÎÉÍÁÔÅÌØÎÙ, ÄÁÎÎÙÅ ËÌÀÞÉ "
+#~ "ÂÏÌØÛÅ ÎÅ ÂÕÄÕÔ ÒÁÂÏÔÁÔØ, ÐÏËÁ ÏÐÃÉÑ ÎÅ ÕÄÁÌÅÎÁ."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "þÔÏÂÙ ×ÎÏ×Ø  ÒÁÚÒÅÛÉÔØ ÜÔÕ ÏÐÃÉÀ, ÕÓÔÁÎÏ×ÉÔÅ ÐÁÒÁÍÅÔÒ "
+#~ "\"PermitUserEnvironment yes\" × ÆÁÊÌÅ sshd_config ÐÏÓÌÅ ÚÁ×ÅÒÛÅÎÉÑ "
+#~ "ÏÂÎÏ×ÌÅÎÉÑ,É ÏÂÒÁÔÉÔÅ ×ÎÉÍÁÎÉÅ ÎÁ ÐÒÅÄÕÐÒÅÖÄÅÎÉÅ × ÓÔÒÁÎÉÃÅ ÒÕËÏ×ÏÄÓÔ×Á "
+#~ "sshd_config(5)."
+
+#~ msgid "Privilege separation"
+#~ msgstr "òÁÚÄÅÌÅÎÉÅ ÐÒÉ×ÉÌÅÇÉÊ"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "òÁÚÄÅÌÅÎÉÅ ÐÒÉ×ÉÌÅÇÉÊ ÐÏ ÕÍÏÌÞÁÎÉÀ ×ËÌÀÞÅÎÏ, ÐÏÜÔÏÍÕ ÅÓÌÉ ÷Ù ÚÁÈÏÔÉÔÅ ÅÇÏ "
+#~ "ÏÔËÌÀÞÉÔØ, ÔÏ ÎÅÏÂÈÏÄÉÍÏ ÄÏÂÁ×ÉÔØ × ÆÁÊÌ /etc/ssh/sshd_config ÓÔÒÏËÕ "
+#~ "\"UsePrivilegeSeparation no\"."
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "òÁÚÒÅÛÉÔØ ÒÁÚÄÅÌÅÎÉÅ ÐÒÉ×ÉÌÅÇÉÊ"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "üÔÁ ×ÅÒÓÉÑ OpenSSH ÓÏÄÅÒÖÉÔ ÎÏ×ÕÀ ÏÐÃÉÀ - ×ÏÚÍÏÖÎÏÓÔØ ÒÁÚÄÅÌÅÎÉÑ "
+#~ "ÐÒÉ×ÅÌÅÇÉÊ. üÔÏ ÚÎÁÞÉÔÅÌØÎÏ ÓÏËÒÁÝÁÅÔ ÒÁÚÍÅÒ ËÏÄÁ, ÒÁÂÏÔÁÀÝÅÇÏ Ó ÐÒÁ×ÁÍÉ "
+#~ "root, É × ÃÅÌÏÍ ÓÎÉÖÁÅÔ ÐÏÔÅÎÃÉÁÌØÎÕÀ ÕÑÚ×ÉÍÏÓÔØ sshd."
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "ë ÓÏÖÁÌÅÎÉÀ, ÒÁÚÄÅÌÅÎÉÅ ÐÒÉ×ÉÌÅÇÉÊ ÐÌÏÈÏ ÒÁÂÏÔÁÅÔ Ó PAM. üÔÏ ÏÔÎÏÓÉÔÓÑ Ë "
+#~ "ÌÀÂÙÍ ÓÏÄÑÌÍ ÓÅÓÓÉÊ PAM, ËÏÔÏÒÙÍ ÎÕÖÎÏ ÒÁÂÏÔÁÔØ Ó ÐÒÁ×ÁÍÉ root (ÎÁÐÒÉÍÅÒ, "
+#~ "pam_mkhomedir), É PAM-ÁÕÔÅÎÔÉÆÉËÁÃÉÑ × ÉÎÔÅÒÁËÔÉ×ÎÏÍ ÒÅÖÉÍÅ Ó ËÌÁ×ÉÁÔÕÒÙ "
+#~ "ÒÁÂÏÔÁÔØ ÎÅ ÂÕÄÅÔ."
+
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "ôÁË ËÁË ÷Ù ÒÁÚÒÅÛÉÌÉ ÍÎÅ ÓÇÅÎÅÒÉÒÏ×ÁÔØ ÄÌÑ ÷ÁÓ ÆÁÊÌ sshd_config, ÔÏ ×Ù "
+#~ "ÍÏÖÅÔÅ ×ÙÂÒÁÔØ, ÎÕÖÎÏ ÌÉ ×ËÌÀÞÉÔØ ÉÌÉ ×ÙËÌÀÞÉÔØ ÏÐÃÉÀ ÒÁÚÄÅÌÅÎÉÑ "
+#~ "ÐÒÉ×ÉÌÅÇÉÊ.åÓÌÉ ÷Ù ÎÅ ÚÎÁÅÔÅ, ÎÕÖÎÏ ÌÉ ÷ÁÍ ÉÓÐÏÌØÚÏ×ÁÔØ ÆÕÎËÃÉÉ PAM, "
+#~ "ËÏÔÏÒÙÅ ÎÅ ÒÁÂÏÔÁÀÔ Ó ÜÔÏÊ ÏÐÃÉÅÊ, ÔÏ ÌÕÞÛÅ ÒÁÚÒÅÛÉÔØ ÅÅ."
diff --git a/debian/po/templates.pot b/debian/po/templates.pot
new file mode 100644
index 000000000..6d43c330f
--- /dev/null
+++ b/debian/po/templates.pot
@@ -0,0 +1,253 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
diff --git a/debian/po/tr.po b/debian/po/tr.po
new file mode 100644
index 000000000..d3d471d3c
--- /dev/null
+++ b/debian/po/tr.po
@@ -0,0 +1,358 @@
+# Turkish translation of ssh.
+# This file is distributed under the same license as the ssh package.
+# Recai OktaÅŸ <roktas@omu.edu.tr>, 2004.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: ssh\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2004-04-27 06:50+0300\n"
+"Last-Translator: Recai OktaÅŸ <roktas@omu.edu.tr>\n"
+"Language-Team: Turkish <debian-l10n-turkish@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms:  nplurals=1; plural=0;\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr ""
+"/usr/lib/ssh-keysign'ın root haklarıyla kurulmasını (SUID root) ister "
+"misiniz?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr ""
+"ssh-keysign yardımcı aracının SUID bit'i etkinleştirilerek kurulması "
+"seçeneğine sahipsiniz."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"Eğer ssh-keysign'ı SUID yaparsanız, SSH'ın makine tabanlı Protokol 2 "
+"yetkilendirmesini kullanabileceksiniz."
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"Bu konuda şüpheliyseniz, size SUID'li kurulumu öneririm. Eğer bu sorunlara "
+"yol açarsa ileride fikrinizi değiştirmek için şu komutu çalıştırabilirsiniz: "
+"dpkg-reconfigure ssh"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Yeni yapılandırma dosyası oluştur"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Debian 'Potato' dağıtımından yükseltme yaptığınız görünüyor. OpenSSH'ın bu "
+"sürümü Debian 'Potato' ile birlikte gelen sürümden çok farklı bir "
+"yapılandırma dosyası kullanmaktadır. Şimdi sizin için yeni bir yapılandırma "
+"dosyası (/etc/ssh/sshd.config) üretebilirim.  Bu dosya yeni sunucu sürümüyle "
+"çalışacak, fakat eski sürümde yaptığınız özelleştirmeleri içermeyecektir."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Yeni yapılandırma dosyasının 'PermitRootLogin' seçeneğini 'yes' olarak "
+"ayarlayacağını (yani root parolasını bilen herhangi birisinin ssh ile "
+"doğrudan sisteme girebileceğini) unutmayın. Öntanımlı ayarın böyle olması "
+"gerektiği paket geliştiricisinin kanaatidir (ayrıntılar için README.Debian "
+"dosyasını okuyun). Aksi kanaate sahipseniz sshd_config dosyasını "
+"düzenleyerek bu seçeneği 'no' olarak ayarlama imkânınız her zaman vardır."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Yeni bir yapılandırma dosyası üretmeme izin vermeniz kuvvetle tavsiye edilir."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "Sadece SSH protokol 2'ye izin ver"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"OpenSSH'ın bu sürümü ssh'ın çok daha güvenli olan sürüm 2 protokolünü "
+"destekler. Sürüm 1 protokolünün etkisizleştirilmesini teşvik ediyoruz, "
+"bununla beraber böyle yapılması halinde düşük düzeyli makinelerde işlemler "
+"yavaşlayacak ve eski sürüm ssh istemcilerinden (\"potato\" ile birlikte "
+"gelen ssh istemcisi gibi) bağlantı kurulamayacaktır."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"Protokol 1 anahtarları çok farklı olduğundan, sadece protokol 2 "
+"bağlantılarına izin vermeniz halinde bu anahtarları kullanamayacağınızı da "
+"lütfen not edin."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"Bu ayar hakkındaki fikriniz ileride değişirse, sshd_config dosyasında "
+"yapacağınız işlemlerle ilgili talimatları README.Debian dosyasında "
+"bulabilirsiniz."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+"Devam etmek istiyor musunuz? (Etkin ssh oturumlarının öldürülmesi riski var.)"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Kurmuş olduğunuz /etc/init.d/ssh sürümü büyük olasılıkla, çalışıyor olan tüm "
+"sshd süreçlerini öldürür. Bu yükseltmeyi bir ssh oturumu üzerinden "
+"yapıyorsanız bu gerçekten Berbat bir Şey olacaktır."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Bu sorunu dosyanın stop bölümündeki start-stop-daemon satırına \"--pidfile /"
+"var/run/sshd.pid\" ekleyerek düzeltebilirsiniz."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr ""
+"NOT: X11 yönlendirme ve yetkilendirmesi öntanımlı olarak "
+"etkisizleÅŸtirilmiÅŸtir."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"Güvenlik gerekçeleriyle ssh'ın Debian sürümünde ForwardX11 ve ForwardAgent "
+"seçenekleri öntanımlı ``off'' değerine ayarlıdır."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"Güvendiğiniz sunucular için bu seçeneği yapılandırma dosyalarından birinde "
+"veya -X komut satırı seçeneğiyle etkinleştirebilirsiniz."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr ""
+"Daha ayrıntılı bilgi /usr/share/doc/ssh/README.Debian dosyasında bulunabilir."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Uyarı: rsh-server kurulmuş --- bu muhtemelen iyi bir fikir değil"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"rsh-server'ın kurulu durumda olması muhtemelen ssh'ı kurmakla elde "
+"edilmesini istediğiniz güvenliği gölgeliyor. Bu paketi kaldırmanızı öneririm."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Uyarı: telnetd kurulmuş --- bu muhtemelen iyi bir fikir değil"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Telnetd paketini (eğer gerçekten telnet erişimi sunmak gibi bir "
+"zorunluluğunuz yoksa) kaldırmanızı veya en azından, telnet oturumlarında "
+"şifrelenmemiş giriş/parola ve oturum bilgilerinin ağ üzerinden "
+"gönderilmemesi olanağını sunan telnetd-ssl paketini kurmanızı öneririm."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "Uyarı: yeni bir makine anahtarı oluşturmalısınız"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"IDEA ile şifrelenmiş eski bir /ect/ssh/ssh_host_key dosyanız var. OpenSSH bu "
+"anahtar dosyasını yönetemez. Eski (özgür olmayan) SSH kurulumuna ait ssh-"
+"keygen aracını da bulamıyorum."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "Yeni bir makine anahtarı oluşturmanız gerekiyor."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "yapılandırma dosyalarındaki ssh2 anahtarları birleştirildi"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "Sürüm 3 itibarıyla OpenSSH artık, ssh1 ve ssh2 için ayrı yapılandırma "
+#~ "dosyaları kullanmamaktadır. Bu, authorized_keys2 ve known_hosts2 "
+#~ "dosyalarının artık gerekmediği anlamına gelir. Geriye doğru uyumluluğu "
+#~ "korumak için bu dosyalar yine de okunacaktır."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "SSH sunucusu sshd'yi çalıştırmak istiyor musunuz?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Bu paket hem ssh istemcisini hem de sshd sunucusunu içeriyor."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Güvenli Kabuk Sunucusu sshd, normalde ssh ile uzaktan girişlere izin "
+#~ "vermek için çalıştırılacaktır."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Eğer amacınız sadece bu makinedeki dış bağlantılar için ssh istemcisini "
+#~ "kullanmak ise ve bu makineye ssh'la girmek gibi bir ÅŸeyi de "
+#~ "istemiyorsanız, sshd sunucusunu bu adımda etkisizleştirebilirsiniz."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Anahtarlara ilişkin ortam seçenekleri geçerliliğini kaybetmiştir"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "OpenSSH'ın bu sürümü belirli atakları önlemek için (ör. LD_PRELOAD) ortak "
+#~ "anahtarlara ait ortam seçeneklerini öntanımlı olarak etkisizleştirir. "
+#~ "Eğer bu seçeneği bir authorized_keys dosyasında kullanıyorsanız, ilgili "
+#~ "seçenek silininceye kadar bu anahtarın artık çalışmayacağını unutmayın."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Bu seçeneği tekrar etkinleştirmek için, sshd_config(5) kılavuz "
+#~ "sayfasındaki uyarı notunu dikkate alarak, sshd yükseltmesi "
+#~ "tamamlandığında /etc/ssh/ssh_config dosyasında \"PermitUserEnvironment yes"
+#~ "\" satırını kullanın."
diff --git a/debian/po/zh_CN.po b/debian/po/zh_CN.po
new file mode 100644
index 000000000..f32d77bcb
--- /dev/null
+++ b/debian/po/zh_CN.po
@@ -0,0 +1,379 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh 3.6.1p2-11\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2004-10-06 14:06+0100\n"
+"PO-Revision-Date: 2004-02-02 18:48+1300\n"
+"Last-Translator: Hiei Xu <nicky@mail.edu.cn>\n"
+"Language-Team: Chinese/Simplified <i18n-translation@lists.linux.net.cn>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid "Do you want /usr/lib/ssh-keysign to be installed SUID root?"
+msgstr "您�将 /usr/lib/ssh-keysign 安装为 SUID root 程��？"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"You have the option of installing the ssh-keysign helper with the SUID bit "
+"set."
+msgstr "您使用为 ssh-keysign 帮助者程�设置 SUID �的选项。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 host-"
+"based authentication."
+msgstr ""
+"如果您为 ssh-keysign 设置了 SUID，您将�以使用 SSH �议 2 的基于主机的认�方"
+"�。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-client.templates.master:4
+msgid ""
+"If in doubt, I suggest you install it with SUID.  If it causes problems you "
+"can change your mind later by running:   dpkg-reconfigure ssh"
+msgstr ""
+"如果有疑问，我建议您将它安装为 SUID。如果它带�麻烦，您�以通过�行：dpkg-"
+"reconfigure ssh �改�主�"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "生�新的�置文件"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"看�您正在从 Debian “Potato��级，当�版本和 Debian “Potato�所带的 OpenSSH 版"
+"本的�置文件对比有了相当多的改�。我现在�以生�适用于新�务器版本的新�置文"
+"件 (/etc/ssh/sshd_config)，但是它�会�留您为旧版本定制的任何�置。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"请注�新的�置文件将会把“PermitRootLogin�的值设置为 yes，(这�味�任何一个知"
+"� root 密�的人都�以直接以 root 登录)。维护者认为这是一个正确的默认值 (详情"
+"请阅读 README.Debian)，但如果您希望，也�以编辑 sshd_config 文件将其设置为 "
+"no。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr "强烈建议让我为您生�一份新的�置文件。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Allow SSH protocol 2 only"
+msgstr "��许 SSH �议 2 (ssh2)。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"This version of OpenSSH supports version 2 of the ssh protocol, which is "
+"much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+"things down on low end machines and might prevent older clients from "
+"connecting (the ssh client shipped with \"potato\" is affected)."
+msgstr ""
+"这个版本的 OpenSSH 支�更加安全的第二版本 ssh �议。我们鼓励您�用 ssh 1，然"
+"而这会�低低端机器速度，并且会阻止�版客户端的连接(“potato�所带的 ssh 客户端"
+"会�到影�)。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"Also please note that keys used for protocol 1 are different so you will not "
+"be able to use them if you only allow protocol 2 connections."
+msgstr ""
+"也请注��议 1 所用的密钥是��的，因此如果您��许�议 2 连接将会导致�能使"
+"用它们。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"If you later change your mind about this setting, README.Debian has "
+"instructions on what to do to your sshd_config file."
+msgstr ""
+"如果您��想改�这个设置，README.Debian 上有说明告诉您如何修改 sshd_Config 文"
+"件。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "您�继续�(会有�死活动的 ssh 会�的�险)？"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"您安装的 /etc/init.d/ssh 版本很�能会�死所有�行中的 sshd 例程。如果您是在通"
+"过 ssh 会�进行这项�级，那�真是件糟糕的事情(tm)。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:38
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"您�以通过添加“--pidfile /var/run/sshd.pid�到这个文件的 stop 部分的 start-"
+"stop-daemon 行�修正这个问题。"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+msgstr "注�：X11 转�和认�默认被�止。"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"For security reasons, the Debian version of ssh has ForwardX11 and "
+"ForwardAgent set to ``off'' by default."
+msgstr ""
+"因为安全性原因，默认情况下 Debian 版本的 ssh 将 ForwardX11 和 ForwardAgent 设"
+"置为 off。"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"You can enable it for servers you trust, either in one of the configuration "
+"files, or with the -X command line option."
+msgstr ""
+"您�以为信赖的�务器�用这个选项，�以通过其中之一的�置文件或者使用 -X 命令"
+"行选项�实现。"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+msgstr "更多细节�以在 /usr/share/doc/ssh/README.Debian 找到"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "警告：已�安装了 rsh �务器 --- �能�是个好主�"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:59
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"安装 rsh �务器很�能会�低您想�通过安装 ssh 得到的安全性。我建议您删除这个"
+"包。"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "警告：已�安装了 telnetd �务器 --- �能�是个好主�"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:66
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"我建议您删除 telnetd 包(如果您�是真的需��供 telnet 访问)，或者安装 "
+"telnetd-ssl，这样至少有时候 telnet 会��会将未加密的 登录�/密� 和会�信�"
+"通过网络��。"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "Warning: you must create a new host key"
+msgstr "警告：您必须创建一个新的主机密钥"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"/etc/ssh/ssh_host_key 是由 IDEA 加密的旧密钥文件。OpenSSH �能处�这�密钥文"
+"件，我也无法找到旧的(�自由的) SSH 安装所带的 ssh-keygen 密钥生�工具。"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:74
+msgid "You will need to generate a new host key."
+msgstr "您需�创建一个新的主机密钥。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:84
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "ssh2 密钥被�并到�置文件"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "在 OpenSSH 第 3 版��为 ssh1 和 ssh2 的密钥使用��的文件。这�味� "
+#~ "authorized_keys2 和 known_hosts2 文件将��需�。但为了����兼容性，它"
+#~ "们�会被读�。"
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "您��行 sshd �务器�？"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "这个软件包内� ssh 客户端和 sshd �务器。"
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr "通常 sshd 安全 Shell �务器都会�行以便�许通过 ssh 进行远程登录。"
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "如果您��在这�机器上使用 ssh 客户端对外连接，完全�想通过 ssh 登录到本"
+#~ "机，那么您�以在这里�用 sshd �务器。"
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "密钥的环境选项已被废弃"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "为了��一些攻击(如 LD_PRELOAD)，这个版本的 OpenSSH 默认�用了公钥上的环境"
+#~ "选项。如果您在�个授�密钥(authorized_keys)文件中用了这个�数，请注�除�"
+#~ "删除了此选项，�则这个�疑的密钥将��起作用。"
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "��新�用这个选项，�级完��请在 /etc/ssh/sshd_config 中加入一"
+#~ "行：“PermitUserEnvironment yes�。请注� sshd_config(5) 手册页中�到的警"
+#~ "告。"
+
+#~ msgid "Privilege separation"
+#~ msgstr "��分离"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "��分离选项是默认打开的。如果想�关闭此选项，您需�在 /etc/ssh/"
+#~ "sshd_config 文件中添加一行“UsePrivilegeSeparation no�。"
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "�用��分离"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "这个版本的 OpenSSH 包�了一个新的��分离的选项，目的是为了�少以 root �"
+#~ "行的代�数目，进而�少了 sshd 被安全�洞影�的机会。"
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "�幸的是，��分离和 PAM �时使用会很糟糕。任何需�以 root �行的 PAM 会�"
+#~ "模� (如 pam_mkhomedir) 都会失败，而且 PAM 键盘交互�认�都�起作用。"
+
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "因为您选择了让我为您生� sshd_config 文件，您�以选择是�打开��分离选"
+#~ "项。除�您知�需�使用 PAM 这个�能和��分离�时工作的功能，�则就应该�"
+#~ "用它。"
diff --git a/debian/rules b/debian/rules
new file mode 100755
index 000000000..0d85abbf3
--- /dev/null
+++ b/debian/rules
@@ -0,0 +1,287 @@
+#!/usr/bin/make -f
+
+# Uncomment this to turn on verbose mode.
+# export DH_VERBOSE=1
+
+# This is the debhelper compatibility version to use.
+export DH_COMPAT=2
+
+# This has to be exported to make some magic below work.
+export DH_OPTIONS
+
+ifeq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+OPTFLAGS := -O2
+else
+OPTFLAGS := -O0
+endif
+
+VERSION := $(shell dpkg-parsechangelog | grep ^Version: | cut -d' ' -f2 | sed 's/.*://')
+DEB_HOST_ARCH := $(shell dpkg-architecture -qDEB_HOST_ARCH)
+
+CLIENT_UDEB := openssh-client-udeb_$(VERSION)_$(DEB_HOST_ARCH).udeb
+SERVER_UDEB := openssh-server-udeb_$(VERSION)_$(DEB_HOST_ARCH).udeb
+
+ifeq (,$(wildcard /usr/bin/po2debconf))
+PO2DEBCONF := no
+MINDEBCONFVER := 0.5
+else
+PO2DEBCONF := yes
+MINDEBCONFVER := 1.2.0
+endif
+
+# We need a new libpam-runtime for sane PAM handling
+# (http://lists.debian.org/debian-devel-announce-0308/msg00012.html).
+# Unfortunately it's hard to detect during the build whether this is
+# appropriate, so woody-compatibility is a pain. I've had to punt and go for
+# a DEB_BUILD_SSH_WOODY environment variable. We can remove this hack once
+# we no longer care about woody.
+ifeq ($(DEB_BUILD_SSH_WOODY),)
+PAMSUBST := no
+PAMDEP := libpam-runtime (>= 0.76-14)
+else
+PAMSUBST := yes
+PAMDEP := libpam-runtime
+endif
+
+# Temporary linkage hack for amd64 due to lack of res_query weak alias, see
+# #242462. Real fix sent upstream.
+ifeq ($(DEB_HOST_ARCH),amd64)
+FORCE_LIBS = LIBS=-lresolv
+endif
+
+# Change the version string to include the Debian version
+SSH_VERSION := $(shell sed -e '/define/!d; s/.*\"\(.*\)\".*/\1/; q' <version.h) Debian-$(shell dpkg-parsechangelog | sed -n -e '/^Version:/s/Version: //p' | sed -e 's/[^-]*-//')
+
+build: build-deb build-udeb
+
+build-deb: build-deb-stamp
+build-deb-stamp:
+        dh_testdir
+        mkdir -p build-deb
+        cd build-deb && $(FORCE_LIBS) ../configure --prefix=/usr --sysconfdir=/etc/ssh --libexecdir=/usr/lib --mandir=/usr/share/man --with-tcp-wrappers --with-xauth=/usr/bin/X11/xauth --with-default-path=/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin --with-superuser-path=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin --with-pam --with-4in6 --with-privsep-path=/var/run/sshd  --without-rand-helper
+
+        # Some 2.2 kernels have trouble with setres[ug]id() (bug #239999).
+        perl -pi -e 's/.*#undef (BROKEN_SETRES[UG]ID).*/#define $$1 1/' build-deb/config.h
+        # Supply pthread linkage for just those binaries linked to PAM.
+        perl -pi -e 's/^(LIBPAM=.*)/$$1 -pthread/' build-deb/Makefile
+
+        $(MAKE) -C build-deb -j 2 ASKPASS_PROGRAM='/usr/bin/ssh-askpass' CFLAGS='$(OPTFLAGS) -g -Wall -DUSE_POSIX_THREADS -DLOGIN_PROGRAM=\"/bin/login\" -DLOGIN_NO_ENDOPT -DSSHD_PAM_SERVICE=\"ssh\" -DSSH_VERSION="\"$(SSH_VERSION)\""' SSH_KEYSIGN='/usr/lib/ssh-keysign'
+        # Support building on Debian 3.0 (with GNOME 1.4) and later.
+        if [ -f /usr/include/libgnomeui-2.0/gnome.h ]; then \
+                $(MAKE) -C contrib gnome-ssh-askpass2 CC='gcc $(OPTFLAGS) -g -Wall'; \
+        elif [ -f /usr/include/gnome-1.0/gnome.h ]; then \
+                $(MAKE) -C contrib gnome-ssh-askpass1 CC='gcc $(OPTFLAGS) -g -Wall'; \
+        fi
+
+        touch build-deb-stamp
+
+build-udeb: build-udeb-stamp
+build-udeb-stamp:
+        dh_testdir
+        mkdir -p build-udeb
+        cd build-udeb && $(FORCE_LIBS) ../configure --prefix=/usr --sysconfdir=/etc/ssh --without-xauth --with-default-path=/usr/local/bin:/bin:/usr/bin --with-superuser-path=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin --with-4in6 --with-privsep-path=/var/run/sshd --without-rand-helper
+        # Avoid libnsl linkage. Ugh.
+        perl -pi -e 's/ +-lnsl//' build-udeb/config.status
+        cd build-udeb && ./config.status
+        $(MAKE) -C build-udeb -j 2 ASKPASS_PROGRAM='/usr/bin/ssh-askpass' CFLAGS='-Os -g -Wall -DSSH_VERSION="\"$(SSH_VERSION)\""' SSH_KEYSIGN='/usr/lib/ssh-keysign' ssh scp sftp sshd ssh-keygen
+        touch build-udeb-stamp
+
+clean:
+        dh_testdir
+        rm -f build-deb-stamp build-udeb-stamp
+        rm -rf build-deb build-udeb
+        -$(MAKE) -C contrib clean
+        rm -f config.log
+ifeq ($(PO2DEBCONF),yes)
+        # Hack for woody compatibility. This makes sure that the
+        # debian/templates file shipped in the source package doesn't
+        # specify encodings, which woody's debconf can't handle. If building
+        # on a system with po-debconf installed (conveniently debhelper (>=
+        # 4.1.16) depends on it), the binary-arch target will generate a
+        # better version for sarge.
+        echo 1 > debian/po/output
+        po2debconf debian/openssh-client.templates.master > debian/openssh-client.templates
+        po2debconf debian/openssh-server.templates.master > debian/openssh-server.templates
+        rm -f debian/po/output
+endif
+ifeq ($(PAMSUBST),yes)
+        if [ -f debian/ssh.pam.new-style ]; then \
+                mv debian/ssh.pam.new-style debian/ssh.pam; \
+        fi
+endif
+        rm -f debian/ssh-askpass-gnome.png
+        dh_clean
+
+install: DH_OPTIONS=-a
+install: build
+        dh_testdir
+        dh_testroot
+        dh_clean -k
+        dh_installdirs
+
+        $(MAKE) -C build-deb DESTDIR=`pwd`/debian/openssh-client install-nokeys
+
+        rm -f debian/openssh-client/etc/ssh/sshd_config
+        #Temporary hack: remove /usr/share/Ssh.bin, since we have no smartcard support anyway.
+        rm -f debian/openssh-client/usr/share/Ssh.bin
+
+        # Split off the server.
+        mv debian/openssh-client/usr/sbin/sshd debian/openssh-server/usr/sbin/
+        mv debian/openssh-client/usr/lib/sftp-server debian/openssh-server/usr/lib/
+        mv debian/openssh-client/usr/share/man/man5/sshd_config.5 debian/openssh-server/usr/share/man/man5/
+        mv debian/openssh-client/usr/share/man/man8/sshd.8 debian/openssh-server/usr/share/man/man8/
+        mv debian/openssh-client/usr/share/man/man8/sftp-server.8 debian/openssh-server/usr/share/man/man8/
+        rmdir debian/openssh-client/var/run/sshd
+
+        install -m 755 contrib/ssh-copy-id debian/openssh-client/usr/bin/ssh-copy-id
+        install -m 644 -c contrib/ssh-copy-id.1 debian/openssh-client/usr/share/man/man1/ssh-copy-id.1
+        install -m 644 debian/moduli.5 debian/openssh-client/usr/share/man/man5/moduli.5
+
+        if [ -f contrib/gnome-ssh-askpass2 ]; then \
+                install -s -o root -g root -m 755 contrib/gnome-ssh-askpass2 debian/ssh-askpass-gnome/usr/lib/ssh/gnome-ssh-askpass; \
+        elif [ -f contrib/gnome-ssh-askpass1 ]; then \
+                install -s -o root -g root -m 755 contrib/gnome-ssh-askpass1 debian/ssh-askpass-gnome/usr/lib/ssh/gnome-ssh-askpass; \
+        fi
+        install -m 644 debian/gnome-ssh-askpass.1 debian/ssh-askpass-gnome/usr/share/man/man1/gnome-ssh-askpass.1
+        uudecode -o debian/ssh-askpass-gnome/usr/share/pixmaps/ssh-askpass-gnome.png debian/ssh-askpass-gnome.png.uue
+
+        install -m 755 debian/ssh-argv0 debian/openssh-client/usr/bin/ssh-argv0
+        install -m 644 debian/ssh-argv0.1 debian/openssh-client/usr/share/man/man1/ssh-argv0.1
+
+        install -o root -g root debian/openssh-server.init debian/openssh-server/etc/init.d/ssh
+        install -o root -g root -m 644 debian/openssh-server.default debian/openssh-server/etc/default/ssh
+
+        install -m 755 build-udeb/ssh debian/openssh-client-udeb/usr/bin/ssh
+        install -m 755 build-udeb/scp debian/openssh-client-udeb/usr/bin/scp
+        install -m 755 build-udeb/sftp debian/openssh-client-udeb/usr/bin/sftp
+        install -m 755 build-udeb/sshd debian/openssh-server-udeb/usr/sbin/sshd
+        install -m 755 build-udeb/ssh-keygen debian/openssh-server-udeb/usr/bin/ssh-keygen
+
+# Build architecture-independent files here.
+binary-indep: binary-ssh
+
+# Build architecture-dependent files here.
+binary-arch: binary-openssh-client binary-openssh-server
+binary-arch: binary-ssh-askpass-gnome
+binary-arch: binary-openssh-client-udeb binary-openssh-server-udeb
+
+binary-openssh-client: DH_OPTIONS=-popenssh-client
+binary-openssh-client: build install
+        dh_testdir
+        dh_testroot
+ifeq ($(PO2DEBCONF),yes)
+        po2debconf -e utf8 debian/openssh-client.templates.master > debian/openssh-client.templates
+endif
+        dh_installdebconf
+        dh_installdocs OVERVIEW README
+        cat debian/copyright.head LICENCE > debian/openssh-client/usr/share/doc/openssh-client/copyright
+        dh_installchangelogs ChangeLog
+        dh_strip
+        dh_compress
+        dh_fixperms
+        dh_installdeb
+        test ! -e debian/ssh/etc/ssh/ssh_prng_cmds \
+          || echo "/etc/ssh/ssh_prng_cmds" >> debian/openssh-client/DEBIAN/conffiles
+        dh_shlibdeps
+        dh_gencontrol -- -V'debconf-depends=debconf (>= $(MINDEBCONFVER))'
+        dh_md5sums
+        dh_builddeb
+
+binary-openssh-server: DH_OPTIONS=-popenssh-server
+binary-openssh-server: build install
+        dh_testdir
+        dh_testroot
+ifeq ($(PO2DEBCONF),yes)
+        po2debconf -e utf8 debian/openssh-server.templates.master > debian/openssh-server.templates
+endif
+        dh_installdebconf
+        dh_installdocs OVERVIEW README
+        cat debian/copyright.head LICENCE > debian/openssh-server/usr/share/doc/openssh-server/copyright
+ifeq ($(PAMSUBST),yes)
+        # Clean up if we've done this already, to ensure idempotency.
+        if [ -f debian/openssh-server.ssh.pam.new-style ]; then \
+                mv debian/openssh-server.ssh.pam.new-style debian/openssh-server.ssh.pam; \
+        fi
+        cp -a debian/openssh-server.ssh.pam debian/openssh-server.ssh.pam.new-style
+        sed -e "s/@include common-auth/auth       required     pam_unix.so/" \
+            -e "s/@include common-account/account    required     pam_unix.so/" \
+            -e "s/@include common-session/session    required     pam_unix.so/" \
+            -e "s/@include common-password/password   required     pam_unix.so/" \
+            debian/openssh-server.ssh.pam.new-style > debian/openssh-server.ssh.pam
+endif
+        dh_installpam --name ssh # TODO: breaks woody backports
+        dh_installchangelogs ChangeLog
+        dh_strip
+        dh_compress
+        dh_fixperms
+        dh_installdeb
+        dh_shlibdeps
+        dh_gencontrol -- -V'debconf-depends=debconf (>= $(MINDEBCONFVER))' \
+                         -V'pam-depends=$(PAMDEP)'
+        dh_md5sums
+        dh_builddeb
+
+binary-ssh: DH_OPTIONS=-pssh
+binary-ssh: build install
+        dh_testdir
+        dh_testroot
+        dh_installdocs
+        cat debian/copyright.head LICENCE > debian/ssh/usr/share/doc/ssh/copyright
+        dh_installchangelogs
+        dh_compress
+        dh_fixperms
+        dh_installdeb
+        dh_gencontrol
+        dh_md5sums
+        dh_builddeb
+
+binary-ssh-askpass-gnome: DH_OPTIONS=-pssh-askpass-gnome
+binary-ssh-askpass-gnome: build install
+        dh_testdir
+        dh_testroot
+        dh_installdocs
+        dh_installexamples debian/ssh-askpass-gnome.desktop
+        dh_installchangelogs ChangeLog
+        dh_strip
+        dh_compress
+        dh_fixperms
+        dh_installdeb
+        dh_shlibdeps
+        dh_gencontrol
+        dh_md5sums
+        dh_builddeb
+
+binary-openssh-client-udeb: DH_OPTIONS=-popenssh-client-udeb
+binary-openssh-client-udeb: build install
+        dh_testdir
+        dh_testroot
+        dh_strip
+        dh_compress
+        dh_fixperms
+        dh_installdeb
+        install -p -o root -g root -m 755 debian/openssh-client-udeb.isinstallable debian/openssh-client-udeb/DEBIAN/isinstallable
+        dh_shlibdeps
+        dh_gencontrol -- -fdebian/files~
+        dpkg-distaddfile $(CLIENT_UDEB) debian-installer optional
+        dh_builddeb --filename=$(CLIENT_UDEB)
+
+binary-openssh-server-udeb: DH_OPTIONS=-popenssh-server-udeb
+binary-openssh-server-udeb: build install
+        dh_testdir
+        dh_testroot
+        dh_strip
+        dh_compress
+        dh_fixperms
+        dh_installdeb
+        dh_shlibdeps
+        dh_gencontrol -- -fdebian/files~
+        dpkg-distaddfile $(SERVER_UDEB) debian-installer optional
+        dh_builddeb --filename=$(SERVER_UDEB)
+
+binary: binary-indep binary-arch
+
+.PHONY: build clean binary-indep binary-arch binary install
+.PHONY: build-deb build-udeb
+.PHONY: binary-openssh-client binary-openssh-server binary-ssh
+.PHONY: binary-ssh-askpass-gnome
+.PHONY: binary-openssh-client-udeb binary-openssh-server-udeb
diff --git a/debian/ssh-argv0 b/debian/ssh-argv0
new file mode 100644
index 000000000..67599aec2
--- /dev/null
+++ b/debian/ssh-argv0
@@ -0,0 +1,30 @@
+#! /bin/sh -e
+
+# Copyright (c) 2001 Jonathan Amery.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+if [ "${0##*/}" = "ssh-argv0" ]
+then
+  echo 'ssh-argv0: This script should not be run like this, see ssh-argv0(1) for details' 1>&2
+  exit 1
+fi
+exec ssh "${0##*/}" "$@"
diff --git a/debian/ssh-argv0.1 b/debian/ssh-argv0.1
new file mode 100644
index 000000000..a36a63d40
--- /dev/null
+++ b/debian/ssh-argv0.1
@@ -0,0 +1,64 @@
+.Dd September 7, 2001 
+.Dt SSH-ARGV0 1
+.Os Debian Project
+.Sh NAME
+.Nm ssh-argv0
+.Nd replaces the old ssh command-name as hostname handling
+.Sh SYNOPSIS
+.Ar hostname | user@hostname
+.Op Fl l Ar login_name
+.Op Ar command
+.Pp
+.Ar hostname | user@hostname
+.Op Fl afgknqstvxACNTX1246
+.Op Fl b Ar bind_address
+.Op Fl c Ar cipher_spec
+.Op Fl e Ar escape_char
+.Op Fl i Ar identity_file
+.Op Fl l Ar login_name
+.Op Fl m Ar mac_spec
+.Op Fl o Ar option
+.Op Fl p Ar port
+.Op Fl F Ar configfile
+.Oo Fl L Xo
+.Sm off
+.Ar port :
+.Ar host :
+.Ar hostport
+.Sm on
+.Xc
+.Oc
+.Oo Fl R Xo
+.Sm off
+.Ar port :
+.Ar host :
+.Ar hostport
+.Sm on
+.Xc
+.Oc
+.Op Fl D Ar port
+.Op Ar command
+.Sh DESCRIPTION
+.Nm
+replaces the old ssh command-name as hostname handling.
+If you link to this script with a hostname then executing the link is
+equivalent to having executed ssh with that hostname as an argument.
+All other arguments are passed to ssh and will be processed normally.
+.Sh OPTIONS
+See
+.Xr ssh 1 .
+.Sh FILES
+See
+.Xr ssh 1 .
+.Sh AUTHORS
+OpenSSH is a derivative of the original and free
+ssh 1.2.12 release by Tatu Ylonen.
+Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos,
+Theo de Raadt and Dug Song
+removed many bugs, re-added newer features and
+created OpenSSH.
+Markus Friedl contributed the support for SSH
+protocol versions 1.5 and 2.0.
+Jonathan Amery wrote this ssh-argv0 script and the associated documentation.
+.Sh SEE ALSO
+.Xr ssh 1
diff --git a/debian/ssh-askpass-gnome.copyright b/debian/ssh-askpass-gnome.copyright
new file mode 100644
index 000000000..4a71dda00
--- /dev/null
+++ b/debian/ssh-askpass-gnome.copyright
@@ -0,0 +1,44 @@
+This package contains a Gnome based implementation of ssh-askpass
+written by Damien Miller.
+
+It is split out from the main package to isolate the dependency on the
+Gnome and X11 libraries.
+
+It was packaged for Debian by Philip Hands <phil@hands.com>.
+
+Copyright:
+
+/*
+**
+** GNOME ssh passphrase requestor
+**
+** Damien Miller <djm@ibs.com.au>
+** 
+** Copyright 1999 Internet Business Solutions
+**
+** Permission is hereby granted, free of charge, to any person
+** obtaining a copy of this software and associated documentation
+** files (the "Software"), to deal in the Software without
+** restriction, including without limitation the rights to use, copy,
+** modify, merge, publish, distribute, sublicense, and/or sell copies
+** of the Software, and to permit persons to whom the Software is
+** furnished to do so, subject to the following conditions:
+**
+** The above copyright notice and this permission notice shall be
+** included in all copies or substantial portions of the Software.
+**
+** THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
+** KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
+** WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+** AND NONINFRINGEMENT.  IN NO EVENT SHALL DAMIEN MILLER OR INTERNET
+** BUSINESS SOLUTIONS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+** LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+** ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
+** OR OTHER DEALINGS IN THE SOFTWARE.
+**
+** Except as contained in this notice, the name of Internet Business
+** Solutions shall not be used in advertising or otherwise to promote
+** the sale, use or other dealings in this Software without prior
+** written authorization from Internet Business Solutions.
+**
+*/
diff --git a/debian/ssh-askpass-gnome.desktop b/debian/ssh-askpass-gnome.desktop
new file mode 100644
index 000000000..ecbb920d7
--- /dev/null
+++ b/debian/ssh-askpass-gnome.desktop
@@ -0,0 +1,12 @@
+[Desktop Entry]
+Version=1.0
+Encoding=UTF-8
+Name=SSH AskPass
+GenericName=ssh-add
+Comment=Enter passphrase to authenticate to the ssh agent
+Exec=/usr/bin/ssh-add
+TryExec=ssh-add
+Terminal=false
+Type=Application
+Icon=ssh-askpass-gnome.png
+Categories=Application;Network;
diff --git a/debian/ssh-askpass-gnome.dirs b/debian/ssh-askpass-gnome.dirs
new file mode 100644
index 000000000..e5d8d3904
--- /dev/null
+++ b/debian/ssh-askpass-gnome.dirs
@@ -0,0 +1,4 @@
+usr/lib/ssh
+usr/share/man/man1
+usr/share/applications
+usr/share/pixmaps
diff --git a/debian/ssh-askpass-gnome.png.uue b/debian/ssh-askpass-gnome.png.uue
new file mode 100644
index 000000000..2c6895530
--- /dev/null
+++ b/debian/ssh-askpass-gnome.png.uue
@@ -0,0 +1,158 @@
+begin 644 ssh-askpass-gnome.png
+MB5!.1PT*&@H````-24A$4@```(0```!S"`,```!N#5HT```#`%!,5$7_____
+M__\("`@0$!`8&!@A(2$Y.3E"0D)*2DI24E):6EIC8V-K:VMS<W-[>WN$A(2,
+MC(R4E)2<G)REI:6MK:VUM;6]O;W6UM;GY^?O[^]:4E(0"`!*0CE*.2%C6DI[
+M:TK_WI0Q*1@I(1!2.0#6O7N$<TK.M7/_WHSWWI3>QH3OUHSGSH2,>TI".2&M
+MC#%*.0A",0!:0@!:4CE22C&<C%JMG&/WWHQ*0BG>QGNEE%HQ*1",<R%*.0!K
+M4@",:P"UI6O&M7/_YY1C6CE".1C.K3G6M3ES6@"4<P#&G`"4C&N]K6O.O7.U
+MI6-:4C%22BDY,1`I(0!20@![8P"$:P"EA`"MC`"UE`#.I0#6K0#>M0#GO0#W
+MQ@#_S@#_[YQ[<TKWYY3>SH36QGMS:T+GUH1K8SE:4BES8QAK6@@Q*0!:2@!C
+M4@!K6@",<P"4>P"]G`#&I0#OQ@#WS@#_U@",A%)*0A!S8P@Y,0!S8P#GQ@#O
+MS@#_YTI:4AA22A#_W@#.QH3W[YS6SH3_YP"4E(P8&!#__Z4I*1@A(1`0$``8
+M&``A(0`I*0!SA!!SA`![C"%[C#%SC!![E#E[E$I[G%(Q.2F$G&N$I7.$I7M*
+M4DHI,2F$K92,K9R$K9R,M:6$C(SO__]C:VM26EI:8V-"2DJ$E)0Q0D(0&!@`
+M"`B<SM:,M;V,O<9*:W.$M<8Y4EHQ2E)CC)Q:A)2MY_]SG*V<UN]KE*64SN>,
+MQM[6Y^^]SM:4I:TY2E)KC)QCA)2EWO>4QMXQ0DI"8W/&UMZ<SN>,O=9:>XQ2
+M<X0A,3G.WN=*6F-[I;V<UO<I.4*,M<Y2:WN<SN]*8W-SG+5KE*UCC*5*<XRE
+MUO=CA)R,O=Y"6FLY4F-KC*52<XQ*:X1:A*4Q4FN4O=Z4QN]*<Y2<I:W>[_\Y
+M0DH8(2D8*3FMM;VEK;6,E)QK<WO.WN\A*3%"4F,I.4HA,4(A.5(($!@0*4*U
+MO<:4G*4Q.4+>Y_<0(4((&#D`"!@($"$0&#&,C)1S<WL0$!@("!````@````T
+M<3]9`````7123E,`0.;89@````%B2T=$`(@%'4@````)<$A9<P``"Q(```L2
+M`=+=?OP````'=$E-10?4`A,0`RQXQ,/8```7GDE$051XG-U;;6P<QWD^T_)'
+MTM1!6Q2UN_F@[<;Q1UVO$L>MW3W6K)&[BUO#N[??L\,6"-)D;^]V;V9<+^TF
+M6X"5K-OU7_^H_K1VV]`_#"F&8""`)(`N(,D1!(%R#$.R4P-M0K=%:3E.X"22
+M4/&F[\SN'6F)LDA:18H.0-[R;F_WF7?>]WF?]YUEK?;_;;SSRP8@!G]C<^?_
+MVL>O_\25!W%\4Z=__.IMSRUON\(8#O'%39T_<>UW_^LWEW]EJW=;^\>)\=%Q
+M_OZF+C/\NQ]^]Y7KG]DBB.4C:_[@RZ.CO>JQ35UFXM]^]K-7]E^]11`O\H-K
+M0$R,CMZ=?;<Z.G%T(Y?A'_OG5WYZ[9:=@J^L'D_D\&N/6*&A/83?BWMJM??Y
+M1JZRQ`=[=F_HS'7'L4%)">+6R^T?`PCX^\`0"1![($3F^5JW.?G2)2ZSN,RW
+MA.&P],,#Q5_*UZ5]M=J/&N?!)Y<%,ER\6=MWS8NUUZ_.U_(6OQ2(+8Z#?+Z\
+M;BR7_]C)6NU[L_>\#%YR\O!P*I@]5UL$(YP,]9/BY/([^R<N=;4MCA//\!?$
+MZVXS@D6HG0377NQ8OZ@=YL-AB@)O<.X,D,5/&GP_?%K%T/.;BYD-C+VW/BI>
+M3H:H^/G!V@)__Z5CMWK#I3,\G/*"@+8:X>#,VT-G(``LR6^\JQS\L`MN9;SV
+MN'887@XIR.VLG!UR?J8P2*[V^QZE`0DH\=PDXGX.2W!P`CRF]G*:7FD,M1.[
+MK1!>#BH^)I[5;-JNJ;&NRG!0#4I9+R0Y/[>X<A[RV?&A?<V'7.[HX2TY[<^;
+M[6_7:MMR`O<+"`GPK)'9H4?%[4L8F1'A@5'G?`)<=-BTG[OTQ5[BG+^WP1N/
+M^.\8V'>O[BG'CW"3C:8>33%/LUA`W1:L1T"P']IS2H-Z!A].\#:.@;QJAQ;6
+MO?">9__^I\\<6?>C"\>^^2KJCP/%OG'&C3GO`08B;AG0-,%!PP@H-KO2%#AN
+MH$R9I0%#/</&+/J>R*^'UKWRGO_\X0__8V)CCKO(3Y8'RS"A<Q$N;,!`$T?>
+MM,`![G<2S`Q-@B(-!S-U5K@'9I@DV[\-3'&P=GA=$-?]])5_FECWHXO'.Q6*
+MDWSOX6T%<G("$S5#GT)0ML$G<;N'LS"7H&RP3*:UY3$)F*7S%?CVWJOWK7?A
+MT_-'SN_9&`;P!BY7Y`3GBC5HL8:!`^9PN!..D?!)#SPSYPB._#X&@%H$`(C`
+MPXBI#P\<DNSU4<<\W_TB9(YAV)I3XP!K,<->F/>IC`F($8J=0G$$58!A"-.>
+MQ@%U4@?^H)G?N69;_OH5`'%8,?5SI]_37,9Z;4+]R,%D.Z^348S`ZAB:6!D1
+M(0&;[=``I6$9M!@IG=T?Y>9\VUOEP3G+:W2:/GAA`K?&R/*SV8(G5(8(_,K2
+M;EMGI$1!?2^@==[-Q)^8I`WS%Q#H^U_8*@@S*N72BP.,"8.I84\3MZ&(346Z
+M-C(%I?E4GQ,:E&]@2BV>`WN`:Z*TYX<[3N_=MF7]<B1U>T?^1<)Q2X>G7DCD
+MG;"M-15+SAQ,X_(^'L3"!RKCY+GN@=V8I<:TE;=T7@H8OA4=LQ`B]]%30DG`
+M)2F&'^*7D\>^YG8&(Y?H:0B;83;B,*8J5@'G]XV>%Y">-F<I7"(8=+9BD+VA
+M3[HKQYZ/(!+\6:OR/;GP1I\,5&%R"@G#@3=UGQ(S9L)->;\)D(B/Q!(930;O
+MP%!ZR6`+&&HGSJ4^LW-%\$'0YA:M(@"2A)%@3XDQ]6SJ6_)SR"`IK`FS>1Q$
+MMV:5F5#J@@6M-(H)FMA"X;?G2.W$V=3#I*VT/4)=G<>DQ"`LT0+_]('`X2:T
+MC!)L*3;#KN%BU.FRRF:^,B=9'&.:7[\50^SGBR\,4X\RTL@;"8;DU?:K\/=Z
+M,H,'%.;-2O-07\W[,&L((PE"#H)2>40)[FU*;R[S/179+XJU-("16>:Z`8XX
+M5UL$BUCTW<HH;24JB1-<,$^;Y;T)@"#5RC4D1NHFQ<<V`^+5)3YQ\E5Q=/2\
+M0-$@,OHA)-(HS+NV0_W8967,NF%DM*2T(K%B]3J!9`M4CQBM5BD1H0O?+_@G
+M-P,"8I,7W]KS@]??W+/"%87SN%P#DMFJUU/5;N:"N"QOT<L];19+0YCQ7)Q6
+MA-*R&'+*<,9`F\*6,;_N8]?MOFX3*/:&5G-[6N0=R[)ZFN)5;)B%X'F(8G\[
+MG\+"%F3*@#LG$A"#O&;YY=*P#$>:+[]%6?5NSOGNS87'6R$089(0QEA&TJB*
+M3:!`00P!B5*MW1>P?`A`QZT(&SBRM!EEJ*'$<I5PT`ME<F-UONE.P.F0B+"2
+M[N#'H[S`<D_<(XC:7K?HP^PI%KF<CEFLHK)&P5-?)';LJ0HWQ%G4Y9L/T6/&
+M*,J"2DHS1EEJ4YFN(X82<`EK)/=+C%1F%MH'.W7J(BI8HOSQ7S_\U';A033?
+M7"?@^,(+^]Z8:-'QQ44@!%T#LB>2R]]6"87[HX$S(J5RM0SI/<1#7D.D4=;B
+MC]T^/?/@-E/HP&CBADVA.+'`)[B(<*"Z$13LZH57L@.VFE@FU4+-@BIY`M)F
+M8?1+TV!'!6>$]'KO[=.3D],/[A`&M/G5F^3M$]<(;4]]34U(97#6XXI-1JLO
+MWC5[,=``]5QIBEA%,LD)K["-+*!(^=KT].<GIR=G'M/!1/[P$7[M)E&(_`T6
+M'O!!MT\(+`<-5,Z[R:JLHZHO[,2B@0]W1B#]31M7R45\M[/KOLG)/Y_\_/3T
+MS.XVV%"Y_X_XQ,:\\V!9D!Q7,BD9/0U(,S<L+VFQ?FXWE#0;V8)*WV5.74V"
+MLA1$:.Q'A,)-)83;)\$4.>`,[]UY[\9TS7'.;Q$]F2,&*\4T[BKA=GV@#-ID
+M+M)8YH^#(9!I@<6)[X[-(^5?J7BGBCNF)Z?EF+EMV"1!>._,?8]L",1+\[>V
+MM0<67AZV"5"5"*W,Y':&?*!(["M^@-<&I80R<MY1G"9]$<>9\6>3,]-WWG''
+M']QQQYTSNT()8F:#IJB]&\:)J>E:IV.:T@-`&3E,,E(&]449(./;TG%GH'P/
+M2@(=DBFA5+_WP?N_^A</W`+CTX_MX#X)[Y^9N6W7QHK@VLOO:1YS+;,>1;:\
+M(>OFK/0WR\6ER*.LI&CJ.X15@*@`RLPH$GF5HN+F;?S\?\OQ[/N@[L`2.V<F
+M'SJU,1"0S'.3R5')2E0XY82SS$MD[==NS"+9#4@,(R82#VHWP"]Q$I1R#T4%
+MY]MNNDJ.F]Y7G4"_^:N_>]<C9S<(`E('CRJV)M+M(>ZE@G/4^JPPRI-APZ[$
+M?R=NE7;HZTW!IY@BZ9F$V,KR",15-^@DT/GYO_E"?@F?V'?HT*'Q=D79%C[X
+M/%>K=9?$C$#$@7"C*.P@Z8QVY)<N@;SJ/%@8NNJM\($5\U\=8;CJ-X:$*/S:
+MJSXQ7'<[8/_*,'\@'YZMRM8#2Q-']B\(295B&1L@7V%ZF#&_Z0%!%Z5,"/KC
+MG#F.3C(.&F$U9#7TX?7_7H'XY!`1_1]NO.J3ZQIB@O<\@A"RBA]7[QQ<EJ)N
+M5NEDP%4JCT#&V+-JJDB%Y7ATG%WQ"`A9&[)D#(JXCP_._[H$<;U8CD\`&#YQ
+M85EZ<`6T:Q5C.-XQ:F:\-,\C$GB%!:)L`&[G0O74J*J+\4Q!(6AL=>K!*IX/
+M@#*5:V\$QSQK!>2>YZZZ\3-AOKI!(<?Q:Q:/+_$>0428DK7T$<@#9V+XOF_Y
+MZ4"-H;KPIXK<&EU^='UJ"_&$^U+]@[A_<H00C6TEYN:EU]YTTW,A`F6^=-,-
+MFF@KK-0N'(O#CMES^A!FF!15&_B%H1M('F(T4>'[%+-6WJ!T#*-B=!DPL=08
+M?B[R)H0M-0NV=HTP4I]]E@M%UAJ^'P+/L)YR<7]SD?N99%X(`KV,XB/<HY(-
+M`1DK79!YW4KOBA]$QK.MODJ`H7"O34!$M/&:-2*BN<1MH4?,G'==L&L6\[T7
+MH5@H;,_W?4^$8OH\1,GA%8F<(D=8%E<=@*J4DA_T2ME%1UPBDS<$\&R0:8-@
+M5+..<&C;X4Q/_]3G'OO,W=^`C,O4X<41\BYO>_U^7X;]K<^?.C74P!(4>YVP
+MDO`CER1RUI0V(U0B0FL^)=C.(<<H;;S6.X6S=4-0O>$7=NZ<V3GSE8>@BG77
+MVSQ<4DG5HL;$#-/VDX7'@C@MRN(*'+/DP("Y/3EO,W5`+U"WX^+2#C)<6*]P
+ML<_[:^-4KF0O];+9':!P(*OO_`SH&YPO70RB]EY];#WL(9PUG)[*E9AELG_O
+M12489J>)7&]D)7+M'&$%UG2J)%Y/$3C`JO(M^S8"!&KQ/P($=SVX<^?#WP+?
+MBBX.$.&<4%M5:D3$G6\6J:H6H2S#LZ@B!!;GAM3\E,D\&:I]P)3I[3)BB*$1
+M%NL?8$XQLD;DY%\%?777%W???=N=#X&_===Q"E'L.&ZR^G7JN^"ICB'4+DRN
+MDHZ4N#9X)*V$)/$<47O2_BB-:`:`&*S&1?F;TD[!OW;G],R?[BKL>Q[YRJ-@
+M"7/XG75`[#NK.8Y#5_&+7BE%+H+0&J35U4IU3UI)Y7I5<(QT)6OK/FYQ%'P0
+M!O72W[]M<N>??/KCW$')-U9$-6`-UVV[GQSTG`2-OSVF:%!(.BH#TR]#PE-M
+MO.8VX\@!XL\31J"(_P!-@,+(AW=_\9;?_JT;5$9<C5M@2H>OOP&Q9*"Q1T&"
+MAADC&85ABBHGU[J5M*N<1Y[I)8A6KDA]O0V5>TK70H"W&\///3:X_L:;%`=C
+M1TE]DLPJG*^[1_?ZT!E/@%D-(.(."`@_#)$/BJUK85OKXU6?HTBJ&FQ)RL!&
+M#S(QZH`Y&SS&JRE&5,(Z!W%Y_^`9G4#YT#9RR-$6B=9'\;;Z1#`B.P)E0AN<
+M,BG@6UP9Y)KI:_%HRT?&72<N^4'F$=P><%!S2E&H^8`G=(US!3W.OW;[Y,R=
+MO*/U?+7#>D9@Z0$Q^'JMYN\,03Z6N9!2C?@JQF[!\T+K]7&6T4[JM-S5'$T*
+MV[;&7$DS['F^AUB6L?ZM8/=@W.ASP[IV]UU0"^Z`1)Q8AC\7/XTU"V)N>1T0
+MM;=3UW/+]@H*O:B/L:VV$Y9),K4&>@':3E9>6#17HU2+1U'2;[9$]8'+OD@V
+MR_V17U#2T>;BIWYG>OIV'F=!7[6@G,G=GL5<?66]1V`.\&Z_FMN<EFH4JITL
+MJXB;M&R?H%:YSBTX#8/R9M5L62_/FP$>6PGEG9'<H5;A9];@X9G)VSC!"&C/
+M;GF:#<H!;5^7*VKGM3E7IBSJIWJ[TQ/+'7N5WD66CW%5WK3'&X(E5Q"WH40$
+MCU.6F2-:+481,]Q7[I^9?I##.ZVNV;)\T7Z'DF"X[F[,.]ST9'#8(6_[<:?'
+MV*@A!V$`@J342F[:8JO=*6EYB+VG(0F.2,/+I[+2:'H=[(GTS]XW>2=DA@`W
+M>:0:'4%[?KCN<M2.<A6F^&20W7KZG8)AY#*O,,L$2HFJD:KV:W3FO*Y;6JQG
+M6M()*4#3$):<#F_40]ESI6I=IKC.KKNF9YXJO`R3GE9TA%C!-E\OD\*8US,A
+MFDCX_=H0TCAD.U`"I888]X]I*_1G\X9D-MKB)E2=H`(!1J*8CH,"!R>,M@:B
+MN4L]1RHP%@^_-#E]&R]Z),.^*XHCA@I^B0?$]G,?M6`UGJG53H5BUR^WF>A3
+MP91SM9)Q)-7U=)2\^P"2(&Q)<NTIL^V>9;@=!UD]44./"9B&.^Z<GGR8\[QC
+MH4S4E[9^*4/4#O(H@7NI0O?`S'W-Q*8AI`.)"L1\7URTR0LG&#6JY/*$#M1'
+M(B@,7;?"ONKFJ.Y%W!C7"-C)^;:'04Y\]NX!YX6JJ4#;\Y?``$X!E29K<M'9
+M7BA@:FINRB1I<:>E*J))&Q2:7.;8'\EI-E6E..JK/-4=/6D8G0XSN8:J:,GJ
+M/$KYW5^Z;_)+MVP7G1_.)S[DX3`.^<)63HO#?;RN<,42P4@3(.0\)M+`IF0.
+M9CBF5^V,H8%5S1A0*#R''P7.+X3O^APXS(]<QARQ%3:PYV;YX=JZ6\;CL:21
+M'E^1Y^P56T8EAC[/M61$6Z5[9IK21H$LF@"0U*"R<FF&A6Z8">U/Q8'8-.MS
+MBV%;"!7"?-O"U+SLAO%1KJ=\:5]Y"*,M=Y%8J#J5#J9618HL]L`NKNF+O([+
+M$L6'J4/RR`3/0P$-Z@QAHJ4,.Z(FJ4,%Q=S.\/1E,.R#4OA<%3CS?/GTKEAT
+MZ@AVF-<J=0Q3O$H]2%0)I&V0.L`.KD5H5QOM?%7TIG5LJ,Q<AL1>0XJQ9^9G
+M+O>@X(F]RWM&SQ+L7X%$>QCH1UXN,*TR3S"AJA@;JY\>!*34F8Y:1^W9T4Y4
+MJ<2($^F=?A/RB$AN;2?6^?R)#T4@EV!\M+@LNIE'Y]ME'Y%T1B5=#NHHCD<E
+M%NT7FBH;,QBEVFRY^P1RJ.IA,-9*BZ[FL[Z#F:_S]U8N&9?KC1<DXJ-GN27;
+M@T3/RJ28<8=V#3L896I?%SUVZ2UN(1[PD/FL9XTR*D;;>6%F;K-C9\;PI3<6
+MEB]OB@O&J[J62TGGB,)#;&P@C@P-,>DI,@NEJXK2$?6!;.EV&VQ$9`%JB*V/
+M)SNY6A<%S^*1#P_/B\?QZ`FC@+3+5.$263_!MF+H3V"YX#*#$3MFHQT9XKB8
+M=45Y$'<JPU$'4]+F4Y"-^=)3,EELVA*[FW/]//>AVH<)LCA,Q(9SV;ZF01X+
+M12J5>-G1Q;)B''1P8.M9E31,09IFC+,F!^;9E$=4X_L%:>E+"[RO%>#@5N'@
+M3!550TD43076I"U:BTPT?JDOB0VCL(.]`:MJC[XIO0-[ROK/&%U^[-_N++TA
+MVC:\C:F5BW[JP)1[3M+UE23P):7B1'&#P)9]"8+]P2R2TDF:0I?((#*V^F!-
+M;OY(OAX`W6IQD'24@+Y&U18T,]K4?%JVFS-P3U(7:T"D6ND9-B-2$P<1N`X(
+MHD>_/-BL0Y9CD8^>0"J8S77)6T(;JG)?FN(X)7HI=,!I$A+5LXI+((N;6=*P
+MA?=8!JQ,G?_>7WW]_)9`3(Q*I+>FW)RG3Y8,14A7[CQ[@<L=7E4YF18&4:]T
+M!$+P@'<RAF;;8`6_`&OP]XH__+*ZP?;^!\8[8^CSKO[6.RN:6TFK>LP(:[71
+M$UR/L%L&AL==U99-/>J;@<6!/7#65A-,&HWV\)V#>\_=_/5+R;D/!?%J=?#B
+M/9T?@.@ZEUM4N"12>Z"!C3YE.>_[#2E`$=,[H=<7U3IMZ9B$N?#,.2V'&H?/
+M?U]<Y?53RUM!,1H+>IGYWE8B#W(G4KJ,M=NP]F&.D>DP4$[;?7.0^WY'B'I7
+MHT&BB$?TL,,ARVJC=O714Q_AV;.5JK5SB',]=C.+-S)/@WC%YA0+K(X(&N[Y
+M//=9K'J4Q758H+8D;@:*,G97!>WQS?W7P=JQ4'WUS6\U"Z6H#WACKBT>E(#B
+M`"8K>K1)@7`.*T`[4Q14A/A(1.:<RZ\^J9B/O[7E6U\\7FL0I$S,<SY+(IDZ
+MJ<R=4QDS5108"E0HKIJP?BJ?N(+<'8D8/YC7GWGU\A??,(AO!&WE1.WXCC@I
+M'%8*#>KI&LHZ71+88I,TTTS:4@4XYAK*M@/B:XOA]HN;R%L>;YE)+N;TM\V&
+MJ&(2H2ZIEPZ2N:))RBT7%NN>T-<@M%;[00OI/2]>.1!3LBBJ/14_\&+MA16N
+M1%!XN2$42;D;5&3I@+CF<0<T?T,=.>313RG+&_I7AXV,?]3+[?9=4S\1+]N$
+M'$\UA7<]W07MCPA"Q%(,G`]7GE?B.7/<M#UZ?-,BXI)CN6IJ\(XTR`+4-YR?
+MG9]08]V(F@W#2`L^G%>0!A^??@@Y6WK([3+CQ-65?U55Y`_"S..0#UX.9V\^
+M=>H,+_2<GSY1.^O4!3&^]I`;7HDG4B\8AR:J)\Z7RSW>-VX)K"%H\E>?TIZ#
+MWQ"A20$$_58GEA[YK]_<?B6>S;U@'+B0[E:H(?:)CAZ1_S9PC94E\I^/)EJE
+MI=Y\8->5!W'1.$,462J=EO])<BC,FM)$9ZUJZ_/X)O\W;$OC)W'Y+/[^\M]9
+M<N_QU\3K2:VH3CBYWJ;&%1X+ZLOEO:Z1++"__DV9LVO;E-$9&WXV_".`J,Q^
+MH(S<`^,GRJX<*UQ^G+Y@=_/\NFWB_^5Q[(+',?;_,D!<.%[_OP"BMI6(_!_$
+3<O>]/$B.A0````!)14Y$KD)@@@``
+`
+end
diff --git a/debian/ssh-askpass-gnome.postinst b/debian/ssh-askpass-gnome.postinst
new file mode 100644
index 000000000..7441cca29
--- /dev/null
+++ b/debian/ssh-askpass-gnome.postinst
@@ -0,0 +1,53 @@
+#! /bin/sh
+# postinst script for ssh-askpass-gnome
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see /usr/share/doc/packaging-manual/
+#
+# quoting from the policy:
+#     Any necessary prompting should almost always be confined to the
+#     post-installation script, and should be protected with a conditional
+#     so that unnecessary prompting doesn't happen if a package's
+#     installation fails and the `postinst' is called with `abort-upgrade',
+#     `abort-remove' or `abort-deconfigure'.
+
+case "$1" in
+    configure)
+        update-alternatives --quiet \
+            --install /usr/bin/ssh-askpass ssh-askpass \
+                      /usr/lib/ssh/gnome-ssh-askpass 30 \
+            --slave /usr/share/man/man1/ssh-askpass.1.gz \
+                    ssh-askpass.1.gz /usr/share/man/man1/gnome-ssh-askpass.1.gz
+
+
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 0
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
diff --git a/debian/ssh-askpass-gnome.prerm b/debian/ssh-askpass-gnome.prerm
new file mode 100644
index 000000000..6f3f5756d
--- /dev/null
+++ b/debian/ssh-askpass-gnome.prerm
@@ -0,0 +1,41 @@
+#! /bin/sh
+# prerm script for ssh-askpass-gnome
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <prerm> `remove'
+#        * <old-prerm> `upgrade' <new-version>
+#        * <new-prerm> `failed-upgrade' <old-version>
+#        * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
+#        * <deconfigured's-prerm> `deconfigure' `in-favour'
+#          <package-being-installed> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see /usr/share/doc/packaging-manual/
+
+case "$1" in
+    remove|deconfigure)
+        update-alternatives --quiet --remove ssh-askpass /usr/lib/ssh/gnome-ssh-askpass
+#       install-info --quiet --remove /usr/info/ssh-askpass.info.gz
+        ;;
+    upgrade)
+#       install-info --quiet --remove /usr/info/ssh-askpass.info.gz
+        ;;
+    failed-upgrade)
+        ;;
+    *)
+        echo "prerm called with unknown argument \`$1'" >&2
+        exit 0
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
diff --git a/entropy.c b/entropy.c
index 0997174b6..572e8cece 100644
--- a/entropy.c
+++ b/entropy.c
@@ -136,6 +136,8 @@ seed_rng(void)
 void
 init_rng(void)
 {
+#if defined (DISABLED_BY_DEBIAN)
+  /* drow: Is this check still too strict for Debian?  */
         /*
          * OpenSSL version numbers: MNNFFPPS: major minor fix patch status
          * We match major, minor, fix and status (not patch)
@@ -143,6 +145,7 @@ init_rng(void)
         if ((SSLeay() ^ OPENSSL_VERSION_NUMBER) & ~0xff0L)
                 fatal("OpenSSL version mismatch. Built against %lx, you "
                     "have %lx", OPENSSL_VERSION_NUMBER, SSLeay());
+#endif
 
 #ifndef OPENSSL_PRNG_ONLY
         if ((original_uid = getuid()) == -1)
diff --git a/log.c b/log.c
index 5d8625d15..3f87a63ee 100644
--- a/log.c
+++ b/log.c
@@ -82,8 +82,9 @@ static struct {
         LogLevel val;
 } log_levels[] =
 {
-        { "QUIET",      SYSLOG_LEVEL_QUIET },
+        { "SILENT",     SYSLOG_LEVEL_SILENT },
         { "FATAL",      SYSLOG_LEVEL_FATAL },
+        { "QUIET",      SYSLOG_LEVEL_QUIET },
         { "ERROR",      SYSLOG_LEVEL_ERROR },
         { "INFO",       SYSLOG_LEVEL_INFO },
         { "VERBOSE",    SYSLOG_LEVEL_VERBOSE },
@@ -196,8 +197,9 @@ log_init(char *av0, LogLevel level, SyslogFacility facility, int on_stderr)
         argv0 = av0;
 
         switch (level) {
-        case SYSLOG_LEVEL_QUIET:
+        case SYSLOG_LEVEL_SILENT:
         case SYSLOG_LEVEL_FATAL:
+        case SYSLOG_LEVEL_QUIET:
         case SYSLOG_LEVEL_ERROR:
         case SYSLOG_LEVEL_INFO:
         case SYSLOG_LEVEL_VERBOSE:
diff --git a/log.h b/log.h
index 2b3c3090f..d7170fc22 100644
--- a/log.h
+++ b/log.h
@@ -37,8 +37,9 @@ typedef enum {
 }       SyslogFacility;
 
 typedef enum {
-        SYSLOG_LEVEL_QUIET,
+        SYSLOG_LEVEL_SILENT,
         SYSLOG_LEVEL_FATAL,
+        SYSLOG_LEVEL_QUIET,
         SYSLOG_LEVEL_ERROR,
         SYSLOG_LEVEL_INFO,
         SYSLOG_LEVEL_VERBOSE,
diff --git a/mdoc2man.pl b/mdoc2man.pl
deleted file mode 100644
index 928fc5d7a..000000000
--- a/mdoc2man.pl
+++ /dev/null
@@ -1,592 +0,0 @@
-#!/usr/bin/perl
-###
-### Quick usage:  mdoc2man.pl < mdoc_manpage.8 > man_manpage.8
-###
-###
-###  Copyright (c) 2001 University of Illinois Board of Trustees
-###  Copyright (c) 2001 Mark D. Roth
-###  All rights reserved.
-### 
-###  Redistribution and use in source and binary forms, with or without
-###  modification, are permitted provided that the following conditions
-###  are met:
-###  1. Redistributions of source code must retain the above copyright
-###     notice, this list of conditions and the following disclaimer.
-###  2. Redistributions in binary form must reproduce the above copyright
-###     notice, this list of conditions and the following disclaimer in the
-###     documentation and/or other materials provided with the distribution.
-###  3. All advertising materials mentioning features or use of this software
-###     must display the following acknowledgement:
-###     This product includes software developed by the University of
-###     Illinois at Urbana, and their contributors.
-###  4. The University nor the names of their
-###     contributors may be used to endorse or promote products derived from
-###     this software without specific prior written permission.
-### 
-###  THIS SOFTWARE IS PROVIDED BY THE TRUSTEES AND CONTRIBUTORS ``AS IS'' AND
-###  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-###  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-###  ARE DISCLAIMED.  IN NO EVENT SHALL THE TRUSTEES OR CONTRIBUTORS BE LIABLE
-###  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-###  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-###  OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-###  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-###  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-###  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-###  SUCH DAMAGE.
-###
-
-use strict;
-
-my ($name, $date, $id);
-my ($line);
-my ($optlist, $oldoptlist, $nospace, $enum, $synopsis);
-my ($reference, $block, $ext, $extopt, $literal);
-my (@refauthors, $reftitle, $refissue, $refdate, $refopt);
-
-
-$optlist = 0;           ### 1 = bullet, 2 = enum, 3 = tag, 4 = item
-$oldoptlist = 0;
-$nospace = 0;
-$synopsis = 0;
-$reference = 0;
-$block = 0;
-$ext = 0;
-$extopt = 0;
-$literal = 0;
-
-while ($line = <STDIN>)
-{
-        if ($line !~ /^\./)
-        {
-                print $line;
-                print ".br\n"
-                        if ($literal);
-                next;
-        }
-
-        $line =~ s/^\.//;
-
-        next
-                if ($line =~ m/\\"/);
-
-        $line = ParseMacro($line);
-        print($line)
-                if (defined $line);
-}
-
-
-
-sub ParseMacro # ($line)
-{
-        my ($line) = @_;
-        my (@words, $retval, $option, $parens);
-
-        @words = split(/\s+/, $line);
-        $retval = '';
-        $option = 0;
-        $parens = 0;
-
-#       print('@words = ', scalar(@words), ': ', join(' ', @words), "\n");
-
-        while ($_ = shift @words)
-        {
-#               print "WORD: $_\n";
-
-                next
-                        if (/^(Li|Pf)$/);
-
-                if (/^Xo$/)
-                {
-                        $ext = 1;
-                        $retval .= ' '
-                                if ($retval ne '' && $retval !~ m/[\n ]$/);
-                        next;
-                }
-
-                if (/^Xc$/)
-                {
-                        $ext = 0;
-                        $retval .= "\n"
-                                if (! $extopt);
-                        last;
-                }
-
-                if (/^Bd$/)
-                {
-                        $literal = 1
-                                if ($words[0] eq '-literal');
-                        $retval .= "\n";
-                        last;
-                }
-
-                if (/^Ed$/)
-                {
-                        $literal = 0;
-                        last;
-                }
-
-                if (/^Ns$/)
-                {
-                        $nospace = 1
-                                if (! $nospace);
-                        $retval =~ s/ $//;
-                        next;
-                }
-
-                if (/^No$/)
-                {
-                        $retval =~ s/ $//;
-                        $retval .= shift @words;
-                        next;
-                }
-
-                if (/^Dq$/)
-                {
-                        $retval .= '``';
-                        do
-                        {
-                                $retval .= (shift @words) . ' ';
-                        }
-                        while (@words > 0 && $words[0] !~ m/^[\.,]/);
-                        $retval =~ s/ $//;
-                        $retval .= '\'\'';
-                        $nospace = 1
-                                if (! $nospace && $words[0] =~ m/^[\.,]/);
-                        next;
-                }
-
-                if (/^(Sq|Ql)$/)
-                {
-                        $retval .= '`' . (shift @words) . '\'';
-                        $nospace = 1
-                                if (! $nospace && $words[0] =~ m/^[\.,]/);
-                        next;
-                }
-
-#               if (/^Ic$/)
-#               {
-#                       $retval .= '\\fB' . shift(@words) . '\\fP';
-#                       next;
-#               }
-
-                if (/^Oo$/)
-                {
-#                       $retval .= "[\\c\n";
-                        $extopt = 1;
-                        $nospace = 1
-                                if (! $nospace);
-                        $retval .= '[';
-                        next;
-                }
-
-                if (/^Oc$/)
-                {
-                        $extopt = 0;
-                        $retval .= ']';
-                        next;
-                }
-
-                $retval .= ' '
-                        if (! $nospace && $retval ne '' && $retval !~ m/[\n ]$/);
-                $nospace = 0
-                        if ($nospace == 1);
-
-                if (/^Dd$/)
-                {
-                        $date = join(' ', @words);
-                        return undef;
-                }
-
-                if (/^Dt$/)
-                {
-                        $id = join(' ', @words);
-                        return undef;
-                }
-
-                if (/^Os$/)
-                {
-                        $retval .= '.TH '
-                                . $id
-                                . " \"$date\" \""
-                                . join(' ', @words)
-                                . "\"";
-                        last;
-                }
-
-                if (/^Sh$/)
-                {
-                        $retval .= '.SH';
-                        if ($words[0] eq 'SYNOPSIS')
-                        {
-                                $synopsis = 1;
-                        }
-                        else
-                        {
-                                $synopsis = 0;
-                        }
-                        next;
-                }
-
-                if (/^Xr$/)
-                {
-                        $retval .= '\\fB' . (shift @words) .
-                                '\\fP(' . (shift @words) . ')'
-                                . (shift @words);
-                        last;
-                }
-
-                if (/^Rs/)
-                {
-                        @refauthors = ();
-                        $reftitle = '';
-                        $refissue = '';
-                        $refdate = '';
-                        $refopt = '';
-                        $reference = 1;
-                        last;
-                }
-
-                if (/^Re/)
-                {
-                        $retval .= "\n";
-
-                        # authors
-                        while (scalar(@refauthors) > 1)
-                        {
-                                $retval .= shift(@refauthors) . ', ';
-                        }
-                        $retval .= 'and '
-                                if ($retval ne '');
-                        $retval .= shift(@refauthors);
-                        
-                        # title 
-                        $retval .= ', \\fI' . $reftitle . '\\fP';
-
-                        # issue
-                        $retval .= ', ' . $refissue
-                                if ($refissue ne '');
-
-                        # date
-                        $retval .= ', ' . $refdate
-                                if ($refdate ne '');
-
-                        # optional info
-                        $retval .= ', ' . $refopt
-                                if ($refopt ne '');
-
-                        $retval .= ".\n";
-
-                        $reference = 0;
-                        last;
-                }
-
-                if ($reference)
-                {
-                        if (/^%A$/)
-                        {
-                                unshift(@refauthors, join(' ', @words));
-                                last;
-                        }
-
-                        if (/^%T$/)
-                        {
-                                $reftitle = join(' ', @words);
-                                $reftitle =~ s/^"//;
-                                $reftitle =~ s/"$//;
-                                last;
-                        }
-
-                        if (/^%N$/)
-                        {
-                                $refissue = join(' ', @words);
-                                last;
-                        }
-
-                        if (/^%D$/)
-                        {
-                                $refdate = join(' ', @words);
-                                last;
-                        }
-
-                        if (/^%O$/)
-                        {
-                                $refopt = join(' ', @words);
-                                last;
-                        }
-                }
-
-                if (/^Nm$/)
-                {
-                        my $n = $name;
-                        $n = shift @words
-                                if (@words > 0);
-                        $name = $n unless $name;
-                        $retval .= ".br\n"
-                                if ($synopsis);
-                        $retval .= "\\fB$n\\fP";
-                        $nospace = 1
-                                if (! $nospace && $words[0] =~ m/^[\.,]/);
-                        next;
-                }
-
-                if (/^Nd$/)
-                {
-                        $retval .= '\\-';
-                        next;
-                }
-
-                if (/^Fl$/)
-                {
-                        $retval .= '\\fB\\-' . (shift @words) . '\\fP';
-                        $nospace = 1
-                                if (! $nospace && $words[0] =~ m/^[\.,]/);
-                        next;
-                }
-
-                if (/^Ar$/)
-                {
-                        $retval .= '\\fI';
-                        if (! defined $words[0])
-                        {
-                                $retval .= 'file ...\\fP';
-                        }
-                        else
-                        {
-                                $retval .= shift(@words) . '\\fP';
-                                while ($words[0] eq '|')
-                                {
-                                        $retval .= ' ' . shift(@words);
-                                        $retval .= ' \\fI' . shift(@words);
-                                        $retval .= '\\fP';
-                                }
-                        }
-                        $nospace = 1
-                                if (! $nospace && $words[0] =~ m/^[\.,]/);
-                        next;
-                }
-
-                if (/^Cm$/)
-                {
-                        $retval .= '\\fB' . (shift @words) . '\\fP';
-                        while ($words[0] =~ m/^[\.,:)]$/)
-                        {
-                                $retval .= shift(@words);
-                        }
-                        next;
-                }
-
-                if (/^Op$/)
-                {
-                        $option = 1;
-                        $nospace = 1
-                                if (! $nospace);
-                        $retval .= '[';
-#                       my $tmp = pop(@words);
-#                       $tmp .= ']';
-#                       push(@words, $tmp);
-                        next;
-                }
-
-                if (/^Pp$/)
-                {
-                        $retval .= "\n";
-                        next;
-                }
-
-                if (/^Ss$/)
-                {
-                        $retval .= '.SS';
-                        next;
-                }
-
-                if (/^Pa$/ && ! $option)
-                {
-                        $retval .= '\\fI';
-                        $retval .= '\\&'
-                                if ($words[0] =~ m/^\./);
-                        $retval .= (shift @words) . '\\fP';
-                        while ($words[0] =~ m/^[\.,:;)]$/)
-                        {
-                                $retval .= shift(@words);
-                        }
-#                       $nospace = 1
-#                               if (! $nospace && $words[0] =~ m/^[\.,:)]/);
-                        next;
-                }
-
-                if (/^Dv$/)
-                {
-                        $retval .= '.BR';
-                        next;
-                }
-
-                if (/^(Em|Ev)$/)
-                {
-                        $retval .= '.IR';
-                        next;
-                }
-
-                if (/^Pq$/)
-                {
-                        $retval .= '(';
-                        $nospace = 1;
-                        $parens = 1;
-                        next;
-                }
-
-                if (/^(S[xy])$/)
-                {
-                        $retval .= '.B ' . join(' ', @words);
-                        last;
-                }
-
-                if (/^Ic$/)
-                {
-                        $retval .= '\\fB';
-                        while (defined $words[0]
-                                && $words[0] !~ m/^[\.,]/)
-                        {
-                                if ($words[0] eq 'Op')
-                                {
-                                        shift(@words);
-                                        $retval .= '[';
-                                        my $tmp = pop(@words);
-                                        $tmp .= ']';
-                                        push(@words, $tmp);
-                                        next;
-                                }
-                                if ($words[0] eq 'Ar')
-                                {
-                                        shift @words;
-                                        $retval .= '\\fI';
-                                        $retval .= shift @words;
-                                        $retval .= '\\fP';
-                                }
-                                else
-                                {
-                                        $retval .= shift @words;
-                                }
-                                $retval .= ' '
-                                        if (! $nospace);
-                        }
-                        $retval =~ s/ $//;
-                        $retval .= '\\fP';
-                        $retval .= shift @words
-                                if (defined $words[0]);
-                        last;
-                }
-
-                if (/^Bl$/)
-                {
-                        $oldoptlist = $optlist;
-                        if ($words[0] eq '-bullet')
-                        {
-                                $optlist = 1;
-                        }
-                        elsif ($words[0] eq '-enum')
-                        {
-                                $optlist = 2;
-                                $enum = 0;
-                        }
-                        elsif ($words[0] eq '-tag')
-                        {
-                                $optlist = 3;
-                        }
-                        elsif ($words[0] eq '-item')
-                        {
-                                $optlist = 4;
-                        }
-                        last;
-                }
-
-                if (/^El$/)
-                {
-                        $optlist = $oldoptlist;
-                        next;
-                }
-
-                if ($optlist && /^It$/)
-                {
-                        if ($optlist == 1)
-                        {
-                                # bullets
-                                $retval .= '.IP \\(bu';
-                                next;
-                        }
-
-                        if ($optlist == 2)
-                        {
-                                # enum
-                                $retval .= '.IP ' . (++$enum) . '.';
-                                next;
-                        }
-
-                        if ($optlist == 3)
-                        {
-                                # tags
-                                $retval .= ".TP\n";
-                                if ($words[0] =~ m/^(Pa|Ev)$/)
-                                {
-                                        shift @words;
-                                        $retval .= '.B';
-                                }
-                                next;
-                        }
-
-                        if ($optlist == 4)
-                        {
-                                # item
-                                $retval .= ".IP\n";
-                                next;
-                        }
-
-                        next;
-                }
-
-                if (/^Sm$/)
-                {
-                        if ($words[0] eq 'off')
-                        {
-                                $nospace = 2;
-                        }
-                        elsif ($words[0] eq 'on')
-                        {
-#                               $retval .= "\n";
-                                $nospace = 0;
-                        }
-                        shift @words;
-                        next;
-                }
-
-                $retval .= "$_";
-        }
-
-        return undef
-                if ($retval eq '.');
-
-        $retval =~ s/^\.([^a-zA-Z])/$1/;
-#       $retval =~ s/ $//;
-
-        $retval .= ')'
-                if ($parens == 1);
-
-        $retval .= ']'
-                if ($option == 1);
-
-#       $retval .= ' '
-#               if ($nospace && $retval ne '' && $retval !~ m/\n$/);
-
-#       $retval .= ' '
-#               if ($extended && $retval !~ m/ $/);
-
-        $retval .= ' '
-                if ($ext && ! $extopt && $retval !~ m/ $/);
-
-        $retval .= "\n"
-                if (! $ext && ! $extopt && $retval ne '' && $retval !~ m/\n$/);
-
-        return $retval;
-}
-
-
diff --git a/moduli.h b/moduli.h
deleted file mode 100644
index 9cd1cd3f8..000000000
--- a/moduli.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* $OpenBSD: moduli.h,v 1.1 2003/07/28 09:49:56 djm Exp $ */
-
-#include <sys/types.h>
-#include <openssl/bn.h>
-
-/*
- * Using virtual memory can cause thrashing.  This should be the largest
- * number that is supported without a large amount of disk activity --
- * that would increase the run time from hours to days or weeks!
- */
-#define LARGE_MINIMUM   (8UL)   /* megabytes */
-
-/*
- * Do not increase this number beyond the unsigned integer bit size.
- * Due to a multiple of 4, it must be LESS than 128 (yielding 2**30 bits).
- */
-#define LARGE_MAXIMUM   (127UL) /* megabytes */
-
-/* Minimum number of primality tests to perform */
-#define TRIAL_MINIMUM           (4)
-
-int gen_candidates(FILE *, int, int, BIGNUM *);
-int prime_test(FILE *, FILE *, u_int32_t, u_int32_t);
diff --git a/monitor_fdpass.c b/monitor_fdpass.c
index dd1a13984..f384c174c 100644
--- a/monitor_fdpass.c
+++ b/monitor_fdpass.c
@@ -27,10 +27,34 @@
 RCSID("$OpenBSD: monitor_fdpass.c,v 1.6 2004/08/13 02:51:48 djm Exp $");
 
 #include <sys/uio.h>
+#include <sys/utsname.h>
 
 #include "log.h"
 #include "monitor_fdpass.h"
 
+static int
+cmsg_type_is_broken(void)
+{
+        static int broken_cmsg_type = -1;
+
+        if (broken_cmsg_type != -1)
+                return broken_cmsg_type;
+        else {
+                struct utsname uts;
+                /* If uname() fails, play safe and assume that cmsg_type
+                 * isn't broken.
+                 */
+                if (!uname(&uts) &&
+                    strcmp(uts.sysname, "Linux") == 0 &&
+                    strncmp(uts.release, "2.0.", 4) == 0)
+                        broken_cmsg_type = 1;
+                else
+                        broken_cmsg_type = 0;
+        }
+
+        return broken_cmsg_type;
+}
+
 void
 mm_send_fd(int sock, int fd)
 {
@@ -115,11 +139,9 @@ mm_receive_fd(int sock)
         cmsg = CMSG_FIRSTHDR(&msg);
         if (cmsg == NULL)
                 fatal("%s: no message header", __func__);
-#ifndef BROKEN_CMSG_TYPE
-        if (cmsg->cmsg_type != SCM_RIGHTS)
+        if (!cmsg_type_is_broken() && cmsg->cmsg_type != SCM_RIGHTS)
                 fatal("%s: expected type %d got %d", __func__,
                     SCM_RIGHTS, cmsg->cmsg_type);
-#endif
         fd = (*(int *)CMSG_DATA(cmsg));
 #endif
         return fd;
diff --git a/openbsd-compat/basename.h b/openbsd-compat/basename.h
deleted file mode 100644
index a8bd6c17c..000000000
--- a/openbsd-compat/basename.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* $Id: basename.h,v 1.3 2003/02/25 03:32:16 djm Exp $ */
-
-#ifndef _BASENAME_H 
-#define _BASENAME_H
-#include "config.h"
-
-#if !defined(HAVE_BASENAME)
-
-char *basename(const char *path);
-
-#endif /* !defined(HAVE_BASENAME) */
-#endif /* _BASENAME_H */
diff --git a/openbsd-compat/bindresvport.h b/openbsd-compat/bindresvport.h
deleted file mode 100644
index b42f46983..000000000
--- a/openbsd-compat/bindresvport.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* $Id: bindresvport.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#ifndef _BSD_BINDRESVPORT_H
-#define _BSD_BINDRESVPORT_H
-
-#include "config.h"
-
-#ifndef HAVE_BINDRESVPORT_SA
-int bindresvport_sa(int sd, struct sockaddr *sa);
-#endif /* !HAVE_BINDRESVPORT_SA */
-
-#endif /* _BSD_BINDRESVPORT_H */
diff --git a/openbsd-compat/bsd-arc4random.h b/openbsd-compat/bsd-arc4random.h
deleted file mode 100644
index 7af757b2d..000000000
--- a/openbsd-compat/bsd-arc4random.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (c) 1999-2000 Damien Miller.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* $Id: bsd-arc4random.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#ifndef _BSD_ARC4RANDOM_H
-#define _BSD_ARC4RANDOM_H
-
-#include "config.h"
-
-#ifndef HAVE_ARC4RANDOM
-unsigned int arc4random(void);
-void arc4random_stir(void);
-#endif /* !HAVE_ARC4RANDOM */
-
-#endif /* _BSD_ARC4RANDOM_H */
diff --git a/openbsd-compat/bsd-getpeereid.h b/openbsd-compat/bsd-getpeereid.h
deleted file mode 100644
index 2e9f077f9..000000000
--- a/openbsd-compat/bsd-getpeereid.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* $Id: bsd-getpeereid.h,v 1.1 2002/09/12 00:33:02 djm Exp $ */
-
-#ifndef _BSD_GETPEEREID_H
-#define _BSD_GETPEEREID_H
-
-#include "config.h"
-
-#include <sys/types.h> /* For uid_t, gid_t */
-
-#ifndef HAVE_GETPEEREID
-int      getpeereid(int , uid_t *, gid_t *);
-#endif /* HAVE_GETPEEREID */
-
-#endif /* _BSD_GETPEEREID_H */
diff --git a/openbsd-compat/bsd-snprintf.h b/openbsd-compat/bsd-snprintf.h
deleted file mode 100644
index 002b764e3..000000000
--- a/openbsd-compat/bsd-snprintf.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* $Id: bsd-snprintf.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#ifndef _BSD_SNPRINTF_H
-#define _BSD_SNPRINTF_H
-
-#include "config.h"
-
-#include <sys/types.h> /* For size_t */
-
-#ifndef HAVE_SNPRINTF
-int snprintf(char *str, size_t count, const char *fmt, ...);
-#endif /* !HAVE_SNPRINTF */
-
-#ifndef HAVE_VSNPRINTF
-int vsnprintf(char *str, size_t count, const char *fmt, va_list args);
-#endif /* !HAVE_SNPRINTF */
-
-
-#endif /* _BSD_SNPRINTF_H */
diff --git a/openbsd-compat/daemon.h b/openbsd-compat/daemon.h
deleted file mode 100644
index 95a077359..000000000
--- a/openbsd-compat/daemon.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* $Id: daemon.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#ifndef _BSD_DAEMON_H
-#define _BSD_DAEMON_H
-
-#include "config.h"
-#ifndef HAVE_DAEMON
-int daemon(int nochdir, int noclose);
-#endif /* !HAVE_DAEMON */
-
-#endif /* _BSD_DAEMON_H */
diff --git a/openbsd-compat/dirname.h b/openbsd-compat/dirname.h
deleted file mode 100644
index 1d61dd06c..000000000
--- a/openbsd-compat/dirname.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef HAVE_DIRNAME
-
-char *dirname(const char *path);
-
-#endif
diff --git a/openbsd-compat/fake-gai-errnos.h b/openbsd-compat/fake-gai-errnos.h
deleted file mode 100644
index 5edc31b59..000000000
--- a/openbsd-compat/fake-gai-errnos.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * fake library for ssh
- *
- * This file is included in getaddrinfo.c and getnameinfo.c.
- * See getaddrinfo.c and getnameinfo.c.
- */
-
-/* $Id: fake-gai-errnos.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-/* for old netdb.h */
-#ifndef EAI_NODATA
-#define EAI_NODATA      1
-#define EAI_MEMORY      2
-#endif
diff --git a/openbsd-compat/fake-getaddrinfo.c b/openbsd-compat/fake-getaddrinfo.c
deleted file mode 100644
index e63bda970..000000000
--- a/openbsd-compat/fake-getaddrinfo.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * fake library for ssh
- *
- * This file includes getaddrinfo(), freeaddrinfo() and gai_strerror().
- * These funtions are defined in rfc2133.
- *
- * But these functions are not implemented correctly. The minimum subset
- * is implemented for ssh use only. For exapmle, this routine assumes
- * that ai_family is AF_INET. Don't use it for another purpose.
- */
-
-#include "includes.h"
-#include "ssh.h"
-
-RCSID("$Id: fake-getaddrinfo.c,v 1.5 2003/03/24 02:35:59 djm Exp $");
-
-#ifndef HAVE_GAI_STRERROR
-char *gai_strerror(int ecode)
-{
-        switch (ecode) {
-                case EAI_NODATA:
-                        return "no address associated with hostname.";
-                case EAI_MEMORY:
-                        return "memory allocation failure.";
-                default:
-                        return "unknown error.";
-        }
-}    
-#endif /* !HAVE_GAI_STRERROR */
-
-#ifndef HAVE_FREEADDRINFO
-void freeaddrinfo(struct addrinfo *ai)
-{
-        struct addrinfo *next;
-
-        do {
-                next = ai->ai_next;
-                free(ai);
-        } while (NULL != (ai = next));
-}
-#endif /* !HAVE_FREEADDRINFO */
-
-#ifndef HAVE_GETADDRINFO
-static struct addrinfo *malloc_ai(int port, u_long addr)
-{
-        struct addrinfo *ai;
-
-        ai = malloc(sizeof(struct addrinfo) + sizeof(struct sockaddr_in));
-        if (ai == NULL)
-                return(NULL);
-        
-        memset(ai, 0, sizeof(struct addrinfo) + sizeof(struct sockaddr_in));
-        
-        ai->ai_addr = (struct sockaddr *)(ai + 1);
-        /* XXX -- ssh doesn't use sa_len */
-        ai->ai_addrlen = sizeof(struct sockaddr_in);
-        ai->ai_addr->sa_family = ai->ai_family = AF_INET;
-
-        ((struct sockaddr_in *)(ai)->ai_addr)->sin_port = port;
-        ((struct sockaddr_in *)(ai)->ai_addr)->sin_addr.s_addr = addr;
-        
-        return(ai);
-}
-
-int getaddrinfo(const char *hostname, const char *servname, 
-                const struct addrinfo *hints, struct addrinfo **res)
-{
-        struct addrinfo *cur, *prev = NULL;
-        struct hostent *hp;
-        struct servent *sp;
-        struct in_addr in;
-        int i;
-        long int port;
-        u_long addr;
-
-        port = 0;
-        if (servname != NULL) {
-                char *cp;
-
-                port = strtol(servname, &cp, 10);
-                if (port > 0 && port <= 65535 && *cp == '\0')
-                        port = htons(port);
-                else if ((sp = getservbyname(servname, NULL)) != NULL)
-                        port = sp->s_port;
-                else
-                        port = 0;
-        }
-
-        if (hints && hints->ai_flags & AI_PASSIVE) {
-                addr = htonl(0x00000000);
-                if (hostname && inet_aton(hostname, &in) != 0)
-                        addr = in.s_addr;
-                if (NULL != (*res = malloc_ai(port, addr)))
-                        return 0;
-                else
-                        return EAI_MEMORY;
-        }
-                
-        if (!hostname) {
-                if (NULL != (*res = malloc_ai(port, htonl(0x7f000001))))
-                        return 0;
-                else
-                        return EAI_MEMORY;
-        }
-        
-        if (inet_aton(hostname, &in)) {
-                if (NULL != (*res = malloc_ai(port, in.s_addr)))
-                        return 0;
-                else
-                        return EAI_MEMORY;
-        }
-        
-        hp = gethostbyname(hostname);
-        if (hp && hp->h_name && hp->h_name[0] && hp->h_addr_list[0]) {
-                for (i = 0; hp->h_addr_list[i]; i++) {
-                        cur = malloc_ai(port, ((struct in_addr *)hp->h_addr_list[i])->s_addr);
-                        if (cur == NULL) {
-                                if (*res)
-                                        freeaddrinfo(*res);
-                                return EAI_MEMORY;
-                        }
-                        
-                        if (prev)
-                                prev->ai_next = cur;
-                        else
-                                *res = cur;
-
-                        prev = cur;
-                }
-                return 0;
-        }
-        
-        return EAI_NODATA;
-}
-#endif /* !HAVE_GETADDRINFO */
diff --git a/openbsd-compat/fake-getaddrinfo.h b/openbsd-compat/fake-getaddrinfo.h
deleted file mode 100644
index 6943378e9..000000000
--- a/openbsd-compat/fake-getaddrinfo.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* $Id: fake-getaddrinfo.h,v 1.4 2003/02/24 01:35:09 djm Exp $ */
-
-#ifndef _FAKE_GETADDRINFO_H
-#define _FAKE_GETADDRINFO_H
-
-#include "config.h"
-
-#include "fake-gai-errnos.h"
-
-#ifndef AI_PASSIVE
-# define AI_PASSIVE        1
-# define AI_CANONNAME      2
-#endif
-
-#ifndef NI_NUMERICHOST
-# define NI_NUMERICHOST    2
-# define NI_NAMEREQD       4
-# define NI_NUMERICSERV    8
-#endif
-
-#ifndef HAVE_STRUCT_ADDRINFO
-struct addrinfo {
-        int     ai_flags;       /* AI_PASSIVE, AI_CANONNAME */
-        int     ai_family;      /* PF_xxx */
-        int     ai_socktype;    /* SOCK_xxx */
-        int     ai_protocol;    /* 0 or IPPROTO_xxx for IPv4 and IPv6 */
-        size_t  ai_addrlen;     /* length of ai_addr */
-        char    *ai_canonname;  /* canonical name for hostname */
-        struct sockaddr *ai_addr;       /* binary address */
-        struct addrinfo *ai_next;       /* next structure in linked list */
-};
-#endif /* !HAVE_STRUCT_ADDRINFO */
-
-#ifndef HAVE_GETADDRINFO
-int getaddrinfo(const char *hostname, const char *servname, 
-                const struct addrinfo *hints, struct addrinfo **res);
-#endif /* !HAVE_GETADDRINFO */
-
-#ifndef HAVE_GAI_STRERROR
-char *gai_strerror(int ecode);
-#endif /* !HAVE_GAI_STRERROR */
-
-#ifndef HAVE_FREEADDRINFO
-void freeaddrinfo(struct addrinfo *ai);
-#endif /* !HAVE_FREEADDRINFO */
-
-#endif /* _FAKE_GETADDRINFO_H */
diff --git a/openbsd-compat/fake-getnameinfo.c b/openbsd-compat/fake-getnameinfo.c
deleted file mode 100644
index e255ed333..000000000
--- a/openbsd-compat/fake-getnameinfo.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * fake library for ssh
- *
- * This file includes getnameinfo().
- * These funtions are defined in rfc2133.
- *
- * But these functions are not implemented correctly. The minimum subset
- * is implemented for ssh use only. For exapmle, this routine assumes
- * that ai_family is AF_INET. Don't use it for another purpose.
- */
-
-#include "includes.h"
-#include "ssh.h"
-
-RCSID("$Id: fake-getnameinfo.c,v 1.2 2001/02/09 01:55:36 djm Exp $");
-
-#ifndef HAVE_GETNAMEINFO
-int getnameinfo(const struct sockaddr *sa, size_t salen, char *host, 
-                size_t hostlen, char *serv, size_t servlen, int flags)
-{
-        struct sockaddr_in *sin = (struct sockaddr_in *)sa;
-        struct hostent *hp;
-        char tmpserv[16];
-
-        if (serv) {
-                snprintf(tmpserv, sizeof(tmpserv), "%d", ntohs(sin->sin_port));
-                if (strlen(tmpserv) >= servlen)
-                        return EAI_MEMORY;
-                else
-                        strcpy(serv, tmpserv);
-        }
-
-        if (host) {
-                if (flags & NI_NUMERICHOST) {
-                        if (strlen(inet_ntoa(sin->sin_addr)) >= hostlen)
-                                return EAI_MEMORY;
-
-                        strcpy(host, inet_ntoa(sin->sin_addr));
-                        return 0;
-                } else {
-                        hp = gethostbyaddr((char *)&sin->sin_addr, 
-                                sizeof(struct in_addr), AF_INET);
-                        if (hp == NULL)
-                                return EAI_NODATA;
-                        
-                        if (strlen(hp->h_name) >= hostlen)
-                                return EAI_MEMORY;
-
-                        strcpy(host, hp->h_name);
-                        return 0;
-                }
-        }
-        return 0;
-}
-#endif /* !HAVE_GETNAMEINFO */
diff --git a/openbsd-compat/fake-getnameinfo.h b/openbsd-compat/fake-getnameinfo.h
deleted file mode 100644
index c9b7908aa..000000000
--- a/openbsd-compat/fake-getnameinfo.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* $Id: fake-getnameinfo.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#ifndef _FAKE_GETNAMEINFO_H
-#define _FAKE_GETNAMEINFO_H
-
-#include "config.h"
-
-#ifndef HAVE_GETNAMEINFO
-int getnameinfo(const struct sockaddr *sa, size_t salen, char *host, 
-                size_t hostlen, char *serv, size_t servlen, int flags);
-#endif /* !HAVE_GETNAMEINFO */
-
-#ifndef NI_MAXSERV
-# define NI_MAXSERV 32
-#endif /* !NI_MAXSERV */
-#ifndef NI_MAXHOST
-# define NI_MAXHOST 1025
-#endif /* !NI_MAXHOST */
-
-#endif /* _FAKE_GETNAMEINFO_H */
diff --git a/openbsd-compat/fake-queue.h b/openbsd-compat/fake-queue.h
deleted file mode 100644
index 176fe3174..000000000
--- a/openbsd-compat/fake-queue.h
+++ /dev/null
@@ -1,584 +0,0 @@
-/*      $OpenBSD: queue.h,v 1.22 2001/06/23 04:39:35 angelos Exp $      */
-/*      $NetBSD: queue.h,v 1.11 1996/05/16 05:17:14 mycroft Exp $       */
-
-/*
- * Copyright (c) 1991, 1993
- *      The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by the University of
- *      California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *      @(#)queue.h     8.5 (Berkeley) 8/20/94
- */
-
-#ifndef _FAKE_QUEUE_H_
-#define _FAKE_QUEUE_H_
-
-/*
- * Ignore all <sys/queue.h> since older platforms have broken/incomplete
- * <sys/queue.h> that are too hard to work around.
- */
-#undef SLIST_HEAD
-#undef SLIST_HEAD_INITIALIZER
-#undef SLIST_ENTRY
-#undef SLIST_FIRST
-#undef SLIST_END
-#undef SLIST_EMPTY
-#undef SLIST_NEXT
-#undef SLIST_FOREACH
-#undef SLIST_INIT
-#undef SLIST_INSERT_AFTER
-#undef SLIST_INSERT_HEAD
-#undef SLIST_REMOVE_HEAD
-#undef SLIST_REMOVE
-#undef LIST_HEAD
-#undef LIST_HEAD_INITIALIZER
-#undef LIST_ENTRY
-#undef LIST_FIRST
-#undef LIST_END
-#undef LIST_EMPTY
-#undef LIST_NEXT
-#undef LIST_FOREACH
-#undef LIST_INIT
-#undef LIST_INSERT_AFTER
-#undef LIST_INSERT_BEFORE
-#undef LIST_INSERT_HEAD
-#undef LIST_REMOVE
-#undef LIST_REPLACE
-#undef SIMPLEQ_HEAD
-#undef SIMPLEQ_HEAD_INITIALIZER
-#undef SIMPLEQ_ENTRY
-#undef SIMPLEQ_FIRST
-#undef SIMPLEQ_END
-#undef SIMPLEQ_EMPTY
-#undef SIMPLEQ_NEXT
-#undef SIMPLEQ_FOREACH
-#undef SIMPLEQ_INIT
-#undef SIMPLEQ_INSERT_HEAD
-#undef SIMPLEQ_INSERT_TAIL
-#undef SIMPLEQ_INSERT_AFTER
-#undef SIMPLEQ_REMOVE_HEAD
-#undef TAILQ_HEAD
-#undef TAILQ_HEAD_INITIALIZER
-#undef TAILQ_ENTRY
-#undef TAILQ_FIRST
-#undef TAILQ_END
-#undef TAILQ_NEXT
-#undef TAILQ_LAST
-#undef TAILQ_PREV
-#undef TAILQ_EMPTY
-#undef TAILQ_FOREACH
-#undef TAILQ_FOREACH_REVERSE
-#undef TAILQ_INIT
-#undef TAILQ_INSERT_HEAD
-#undef TAILQ_INSERT_TAIL
-#undef TAILQ_INSERT_AFTER
-#undef TAILQ_INSERT_BEFORE
-#undef TAILQ_REMOVE
-#undef TAILQ_REPLACE
-#undef CIRCLEQ_HEAD
-#undef CIRCLEQ_HEAD_INITIALIZER
-#undef CIRCLEQ_ENTRY
-#undef CIRCLEQ_FIRST
-#undef CIRCLEQ_LAST
-#undef CIRCLEQ_END
-#undef CIRCLEQ_NEXT
-#undef CIRCLEQ_PREV
-#undef CIRCLEQ_EMPTY
-#undef CIRCLEQ_FOREACH
-#undef CIRCLEQ_FOREACH_REVERSE
-#undef CIRCLEQ_INIT
-#undef CIRCLEQ_INSERT_AFTER
-#undef CIRCLEQ_INSERT_BEFORE
-#undef CIRCLEQ_INSERT_HEAD
-#undef CIRCLEQ_INSERT_TAIL
-#undef CIRCLEQ_REMOVE
-#undef CIRCLEQ_REPLACE
-
-/*
- * This file defines five types of data structures: singly-linked lists, 
- * lists, simple queues, tail queues, and circular queues.
- *
- *
- * A singly-linked list is headed by a single forward pointer. The elements
- * are singly linked for minimum space and pointer manipulation overhead at
- * the expense of O(n) removal for arbitrary elements. New elements can be
- * added to the list after an existing element or at the head of the list.
- * Elements being removed from the head of the list should use the explicit
- * macro for this purpose for optimum efficiency. A singly-linked list may
- * only be traversed in the forward direction.  Singly-linked lists are ideal
- * for applications with large datasets and few or no removals or for
- * implementing a LIFO queue.
- *
- * A list is headed by a single forward pointer (or an array of forward
- * pointers for a hash table header). The elements are doubly linked
- * so that an arbitrary element can be removed without a need to
- * traverse the list. New elements can be added to the list before
- * or after an existing element or at the head of the list. A list
- * may only be traversed in the forward direction.
- *
- * A simple queue is headed by a pair of pointers, one the head of the
- * list and the other to the tail of the list. The elements are singly
- * linked to save space, so elements can only be removed from the
- * head of the list. New elements can be added to the list before or after
- * an existing element, at the head of the list, or at the end of the
- * list. A simple queue may only be traversed in the forward direction.
- *
- * A tail queue is headed by a pair of pointers, one to the head of the
- * list and the other to the tail of the list. The elements are doubly
- * linked so that an arbitrary element can be removed without a need to
- * traverse the list. New elements can be added to the list before or
- * after an existing element, at the head of the list, or at the end of
- * the list. A tail queue may be traversed in either direction.
- *
- * A circle queue is headed by a pair of pointers, one to the head of the
- * list and the other to the tail of the list. The elements are doubly
- * linked so that an arbitrary element can be removed without a need to
- * traverse the list. New elements can be added to the list before or after
- * an existing element, at the head of the list, or at the end of the list.
- * A circle queue may be traversed in either direction, but has a more
- * complex end of list detection.
- *
- * For details on the use of these macros, see the queue(3) manual page.
- */
-
-/*
- * Singly-linked List definitions.
- */
-#define SLIST_HEAD(name, type)                                          \
-struct name {                                                           \
-        struct type *slh_first; /* first element */                     \
-}
- 
-#define SLIST_HEAD_INITIALIZER(head)                                    \
-        { NULL }
- 
-#define SLIST_ENTRY(type)                                               \
-struct {                                                                \
-        struct type *sle_next;  /* next element */                      \
-}
- 
-/*
- * Singly-linked List access methods.
- */
-#define SLIST_FIRST(head)       ((head)->slh_first)
-#define SLIST_END(head)         NULL
-#define SLIST_EMPTY(head)       (SLIST_FIRST(head) == SLIST_END(head))
-#define SLIST_NEXT(elm, field)  ((elm)->field.sle_next)
-
-#define SLIST_FOREACH(var, head, field)                                 \
-        for((var) = SLIST_FIRST(head);                                  \
-            (var) != SLIST_END(head);                                   \
-            (var) = SLIST_NEXT(var, field))
-
-/*
- * Singly-linked List functions.
- */
-#define SLIST_INIT(head) {                                              \
-        SLIST_FIRST(head) = SLIST_END(head);                            \
-}
-
-#define SLIST_INSERT_AFTER(slistelm, elm, field) do {                   \
-        (elm)->field.sle_next = (slistelm)->field.sle_next;             \
-        (slistelm)->field.sle_next = (elm);                             \
-} while (0)
-
-#define SLIST_INSERT_HEAD(head, elm, field) do {                        \
-        (elm)->field.sle_next = (head)->slh_first;                      \
-        (head)->slh_first = (elm);                                      \
-} while (0)
-
-#define SLIST_REMOVE_HEAD(head, field) do {                             \
-        (head)->slh_first = (head)->slh_first->field.sle_next;          \
-} while (0)
-
-#define SLIST_REMOVE(head, elm, type, field) do {                       \
-        if ((head)->slh_first == (elm)) {                               \
-                SLIST_REMOVE_HEAD((head), field);                       \
-        }                                                               \
-        else {                                                          \
-                struct type *curelm = (head)->slh_first;                \
-                while( curelm->field.sle_next != (elm) )                \
-                        curelm = curelm->field.sle_next;                \
-                curelm->field.sle_next =                                \
-                    curelm->field.sle_next->field.sle_next;             \
-        }                                                               \
-} while (0)
-
-/*
- * List definitions.
- */
-#define LIST_HEAD(name, type)                                           \
-struct name {                                                           \
-        struct type *lh_first;  /* first element */                     \
-}
-
-#define LIST_HEAD_INITIALIZER(head)                                     \
-        { NULL }
-
-#define LIST_ENTRY(type)                                                \
-struct {                                                                \
-        struct type *le_next;   /* next element */                      \
-        struct type **le_prev;  /* address of previous next element */  \
-}
-
-/*
- * List access methods
- */
-#define LIST_FIRST(head)                ((head)->lh_first)
-#define LIST_END(head)                  NULL
-#define LIST_EMPTY(head)                (LIST_FIRST(head) == LIST_END(head))
-#define LIST_NEXT(elm, field)           ((elm)->field.le_next)
-
-#define LIST_FOREACH(var, head, field)                                  \
-        for((var) = LIST_FIRST(head);                                   \
-            (var)!= LIST_END(head);                                     \
-            (var) = LIST_NEXT(var, field))
-
-/*
- * List functions.
- */
-#define LIST_INIT(head) do {                                            \
-        LIST_FIRST(head) = LIST_END(head);                              \
-} while (0)
-
-#define LIST_INSERT_AFTER(listelm, elm, field) do {                     \
-        if (((elm)->field.le_next = (listelm)->field.le_next) != NULL)  \
-                (listelm)->field.le_next->field.le_prev =               \
-                    &(elm)->field.le_next;                              \
-        (listelm)->field.le_next = (elm);                               \
-        (elm)->field.le_prev = &(listelm)->field.le_next;               \
-} while (0)
-
-#define LIST_INSERT_BEFORE(listelm, elm, field) do {                    \
-        (elm)->field.le_prev = (listelm)->field.le_prev;                \
-        (elm)->field.le_next = (listelm);                               \
-        *(listelm)->field.le_prev = (elm);                              \
-        (listelm)->field.le_prev = &(elm)->field.le_next;               \
-} while (0)
-
-#define LIST_INSERT_HEAD(head, elm, field) do {                         \
-        if (((elm)->field.le_next = (head)->lh_first) != NULL)          \
-                (head)->lh_first->field.le_prev = &(elm)->field.le_next;\
-        (head)->lh_first = (elm);                                       \
-        (elm)->field.le_prev = &(head)->lh_first;                       \
-} while (0)
-
-#define LIST_REMOVE(elm, field) do {                                    \
-        if ((elm)->field.le_next != NULL)                               \
-                (elm)->field.le_next->field.le_prev =                   \
-                    (elm)->field.le_prev;                               \
-        *(elm)->field.le_prev = (elm)->field.le_next;                   \
-} while (0)
-
-#define LIST_REPLACE(elm, elm2, field) do {                             \
-        if (((elm2)->field.le_next = (elm)->field.le_next) != NULL)     \
-                (elm2)->field.le_next->field.le_prev =                  \
-                    &(elm2)->field.le_next;                             \
-        (elm2)->field.le_prev = (elm)->field.le_prev;                   \
-        *(elm2)->field.le_prev = (elm2);                                \
-} while (0)
-
-/*
- * Simple queue definitions.
- */
-#define SIMPLEQ_HEAD(name, type)                                        \
-struct name {                                                           \
-        struct type *sqh_first; /* first element */                     \
-        struct type **sqh_last; /* addr of last next element */         \
-}
-
-#define SIMPLEQ_HEAD_INITIALIZER(head)                                  \
-        { NULL, &(head).sqh_first }
-
-#define SIMPLEQ_ENTRY(type)                                             \
-struct {                                                                \
-        struct type *sqe_next;  /* next element */                      \
-}
-
-/*
- * Simple queue access methods.
- */
-#define SIMPLEQ_FIRST(head)         ((head)->sqh_first)
-#define SIMPLEQ_END(head)           NULL
-#define SIMPLEQ_EMPTY(head)         (SIMPLEQ_FIRST(head) == SIMPLEQ_END(head))
-#define SIMPLEQ_NEXT(elm, field)    ((elm)->field.sqe_next)
-
-#define SIMPLEQ_FOREACH(var, head, field)                               \
-        for((var) = SIMPLEQ_FIRST(head);                                \
-            (var) != SIMPLEQ_END(head);                                 \
-            (var) = SIMPLEQ_NEXT(var, field))
-
-/*
- * Simple queue functions.
- */
-#define SIMPLEQ_INIT(head) do {                                         \
-        (head)->sqh_first = NULL;                                       \
-        (head)->sqh_last = &(head)->sqh_first;                          \
-} while (0)
-
-#define SIMPLEQ_INSERT_HEAD(head, elm, field) do {                      \
-        if (((elm)->field.sqe_next = (head)->sqh_first) == NULL)        \
-                (head)->sqh_last = &(elm)->field.sqe_next;              \
-        (head)->sqh_first = (elm);                                      \
-} while (0)
-
-#define SIMPLEQ_INSERT_TAIL(head, elm, field) do {                      \
-        (elm)->field.sqe_next = NULL;                                   \
-        *(head)->sqh_last = (elm);                                      \
-        (head)->sqh_last = &(elm)->field.sqe_next;                      \
-} while (0)
-
-#define SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do {            \
-        if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\
-                (head)->sqh_last = &(elm)->field.sqe_next;              \
-        (listelm)->field.sqe_next = (elm);                              \
-} while (0)
-
-#define SIMPLEQ_REMOVE_HEAD(head, elm, field) do {                      \
-        if (((head)->sqh_first = (elm)->field.sqe_next) == NULL)        \
-                (head)->sqh_last = &(head)->sqh_first;                  \
-} while (0)
-
-/*
- * Tail queue definitions.
- */
-#define TAILQ_HEAD(name, type)                                          \
-struct name {                                                           \
-        struct type *tqh_first; /* first element */                     \
-        struct type **tqh_last; /* addr of last next element */         \
-}
-
-#define TAILQ_HEAD_INITIALIZER(head)                                    \
-        { NULL, &(head).tqh_first }
-
-#define TAILQ_ENTRY(type)                                               \
-struct {                                                                \
-        struct type *tqe_next;  /* next element */                      \
-        struct type **tqe_prev; /* address of previous next element */  \
-}
-
-/* 
- * tail queue access methods 
- */
-#define TAILQ_FIRST(head)               ((head)->tqh_first)
-#define TAILQ_END(head)                 NULL
-#define TAILQ_NEXT(elm, field)          ((elm)->field.tqe_next)
-#define TAILQ_LAST(head, headname)                                      \
-        (*(((struct headname *)((head)->tqh_last))->tqh_last))
-/* XXX */
-#define TAILQ_PREV(elm, headname, field)                                \
-        (*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
-#define TAILQ_EMPTY(head)                                               \
-        (TAILQ_FIRST(head) == TAILQ_END(head))
-
-#define TAILQ_FOREACH(var, head, field)                                 \
-        for((var) = TAILQ_FIRST(head);                                  \
-            (var) != TAILQ_END(head);                                   \
-            (var) = TAILQ_NEXT(var, field))
-
-#define TAILQ_FOREACH_REVERSE(var, head, field, headname)               \
-        for((var) = TAILQ_LAST(head, headname);                         \
-            (var) != TAILQ_END(head);                                   \
-            (var) = TAILQ_PREV(var, headname, field))
-
-/*
- * Tail queue functions.
- */
-#define TAILQ_INIT(head) do {                                           \
-        (head)->tqh_first = NULL;                                       \
-        (head)->tqh_last = &(head)->tqh_first;                          \
-} while (0)
-
-#define TAILQ_INSERT_HEAD(head, elm, field) do {                        \
-        if (((elm)->field.tqe_next = (head)->tqh_first) != NULL)        \
-                (head)->tqh_first->field.tqe_prev =                     \
-                    &(elm)->field.tqe_next;                             \
-        else                                                            \
-                (head)->tqh_last = &(elm)->field.tqe_next;              \
-        (head)->tqh_first = (elm);                                      \
-        (elm)->field.tqe_prev = &(head)->tqh_first;                     \
-} while (0)
-
-#define TAILQ_INSERT_TAIL(head, elm, field) do {                        \
-        (elm)->field.tqe_next = NULL;                                   \
-        (elm)->field.tqe_prev = (head)->tqh_last;                       \
-        *(head)->tqh_last = (elm);                                      \
-        (head)->tqh_last = &(elm)->field.tqe_next;                      \
-} while (0)
-
-#define TAILQ_INSERT_AFTER(head, listelm, elm, field) do {              \
-        if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\
-                (elm)->field.tqe_next->field.tqe_prev =                 \
-                    &(elm)->field.tqe_next;                             \
-        else                                                            \
-                (head)->tqh_last = &(elm)->field.tqe_next;              \
-        (listelm)->field.tqe_next = (elm);                              \
-        (elm)->field.tqe_prev = &(listelm)->field.tqe_next;             \
-} while (0)
-
-#define TAILQ_INSERT_BEFORE(listelm, elm, field) do {                   \
-        (elm)->field.tqe_prev = (listelm)->field.tqe_prev;              \
-        (elm)->field.tqe_next = (listelm);                              \
-        *(listelm)->field.tqe_prev = (elm);                             \
-        (listelm)->field.tqe_prev = &(elm)->field.tqe_next;             \
-} while (0)
-
-#define TAILQ_REMOVE(head, elm, field) do {                             \
-        if (((elm)->field.tqe_next) != NULL)                            \
-                (elm)->field.tqe_next->field.tqe_prev =                 \
-                    (elm)->field.tqe_prev;                              \
-        else                                                            \
-                (head)->tqh_last = (elm)->field.tqe_prev;               \
-        *(elm)->field.tqe_prev = (elm)->field.tqe_next;                 \
-} while (0)
-
-#define TAILQ_REPLACE(head, elm, elm2, field) do {                      \
-        if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL)   \
-                (elm2)->field.tqe_next->field.tqe_prev =                \
-                    &(elm2)->field.tqe_next;                            \
-        else                                                            \
-                (head)->tqh_last = &(elm2)->field.tqe_next;             \
-        (elm2)->field.tqe_prev = (elm)->field.tqe_prev;                 \
-        *(elm2)->field.tqe_prev = (elm2);                               \
-} while (0)
-
-/*
- * Circular queue definitions.
- */
-#define CIRCLEQ_HEAD(name, type)                                        \
-struct name {                                                           \
-        struct type *cqh_first;         /* first element */             \
-        struct type *cqh_last;          /* last element */              \
-}
-
-#define CIRCLEQ_HEAD_INITIALIZER(head)                                  \
-        { CIRCLEQ_END(&head), CIRCLEQ_END(&head) }
-
-#define CIRCLEQ_ENTRY(type)                                             \
-struct {                                                                \
-        struct type *cqe_next;          /* next element */              \
-        struct type *cqe_prev;          /* previous element */          \
-}
-
-/*
- * Circular queue access methods 
- */
-#define CIRCLEQ_FIRST(head)             ((head)->cqh_first)
-#define CIRCLEQ_LAST(head)              ((head)->cqh_last)
-#define CIRCLEQ_END(head)               ((void *)(head))
-#define CIRCLEQ_NEXT(elm, field)        ((elm)->field.cqe_next)
-#define CIRCLEQ_PREV(elm, field)        ((elm)->field.cqe_prev)
-#define CIRCLEQ_EMPTY(head)                                             \
-        (CIRCLEQ_FIRST(head) == CIRCLEQ_END(head))
-
-#define CIRCLEQ_FOREACH(var, head, field)                               \
-        for((var) = CIRCLEQ_FIRST(head);                                \
-            (var) != CIRCLEQ_END(head);                                 \
-            (var) = CIRCLEQ_NEXT(var, field))
-
-#define CIRCLEQ_FOREACH_REVERSE(var, head, field)                       \
-        for((var) = CIRCLEQ_LAST(head);                                 \
-            (var) != CIRCLEQ_END(head);                                 \
-            (var) = CIRCLEQ_PREV(var, field))
-
-/*
- * Circular queue functions.
- */
-#define CIRCLEQ_INIT(head) do {                                         \
-        (head)->cqh_first = CIRCLEQ_END(head);                          \
-        (head)->cqh_last = CIRCLEQ_END(head);                           \
-} while (0)
-
-#define CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do {            \
-        (elm)->field.cqe_next = (listelm)->field.cqe_next;              \
-        (elm)->field.cqe_prev = (listelm);                              \
-        if ((listelm)->field.cqe_next == CIRCLEQ_END(head))             \
-                (head)->cqh_last = (elm);                               \
-        else                                                            \
-                (listelm)->field.cqe_next->field.cqe_prev = (elm);      \
-        (listelm)->field.cqe_next = (elm);                              \
-} while (0)
-
-#define CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do {           \
-        (elm)->field.cqe_next = (listelm);                              \
-        (elm)->field.cqe_prev = (listelm)->field.cqe_prev;              \
-        if ((listelm)->field.cqe_prev == CIRCLEQ_END(head))             \
-                (head)->cqh_first = (elm);                              \
-        else                                                            \
-                (listelm)->field.cqe_prev->field.cqe_next = (elm);      \
-        (listelm)->field.cqe_prev = (elm);                              \
-} while (0)
-
-#define CIRCLEQ_INSERT_HEAD(head, elm, field) do {                      \
-        (elm)->field.cqe_next = (head)->cqh_first;                      \
-        (elm)->field.cqe_prev = CIRCLEQ_END(head);                      \
-        if ((head)->cqh_last == CIRCLEQ_END(head))                      \
-                (head)->cqh_last = (elm);                               \
-        else                                                            \
-                (head)->cqh_first->field.cqe_prev = (elm);              \
-        (head)->cqh_first = (elm);                                      \
-} while (0)
-
-#define CIRCLEQ_INSERT_TAIL(head, elm, field) do {                      \
-        (elm)->field.cqe_next = CIRCLEQ_END(head);                      \
-        (elm)->field.cqe_prev = (head)->cqh_last;                       \
-        if ((head)->cqh_first == CIRCLEQ_END(head))                     \
-                (head)->cqh_first = (elm);                              \
-        else                                                            \
-                (head)->cqh_last->field.cqe_next = (elm);               \
-        (head)->cqh_last = (elm);                                       \
-} while (0)
-
-#define CIRCLEQ_REMOVE(head, elm, field) do {                           \
-        if ((elm)->field.cqe_next == CIRCLEQ_END(head))                 \
-                (head)->cqh_last = (elm)->field.cqe_prev;               \
-        else                                                            \
-                (elm)->field.cqe_next->field.cqe_prev =                 \
-                    (elm)->field.cqe_prev;                              \
-        if ((elm)->field.cqe_prev == CIRCLEQ_END(head))                 \
-                (head)->cqh_first = (elm)->field.cqe_next;              \
-        else                                                            \
-                (elm)->field.cqe_prev->field.cqe_next =                 \
-                    (elm)->field.cqe_next;                              \
-} while (0)
-
-#define CIRCLEQ_REPLACE(head, elm, elm2, field) do {                    \
-        if (((elm2)->field.cqe_next = (elm)->field.cqe_next) ==         \
-            CIRCLEQ_END(head))                                          \
-                (head).cqh_last = (elm2);                               \
-        else                                                            \
-                (elm2)->field.cqe_next->field.cqe_prev = (elm2);        \
-        if (((elm2)->field.cqe_prev = (elm)->field.cqe_prev) ==         \
-            CIRCLEQ_END(head))                                          \
-                (head).cqh_first = (elm2);                              \
-        else                                                            \
-                (elm2)->field.cqe_prev->field.cqe_next = (elm2);        \
-} while (0)
-
-#endif  /* !_FAKE_QUEUE_H_ */
diff --git a/openbsd-compat/fake-socket.h b/openbsd-compat/fake-socket.h
deleted file mode 100644
index f364797fa..000000000
--- a/openbsd-compat/fake-socket.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* $Id: fake-socket.h,v 1.3 2002/04/12 03:35:40 tim Exp $ */
-
-#ifndef _FAKE_SOCKET_H
-#define _FAKE_SOCKET_H
-
-#include "includes.h"
-#include "sys/types.h"
-
-#ifndef HAVE_STRUCT_SOCKADDR_STORAGE
-# define        _SS_MAXSIZE     128     /* Implementation specific max size */
-# define       _SS_PADSIZE     (_SS_MAXSIZE - sizeof (struct sockaddr))
-
-struct sockaddr_storage {
-        struct  sockaddr ss_sa;
-        char            __ss_pad2[_SS_PADSIZE];
-};
-# define ss_family ss_sa.sa_family
-#endif /* !HAVE_STRUCT_SOCKADDR_STORAGE */
-
-#ifndef IN6_IS_ADDR_LOOPBACK
-# define IN6_IS_ADDR_LOOPBACK(a) \
-        (((u_int32_t *) (a))[0] == 0 && ((u_int32_t *) (a))[1] == 0 && \
-         ((u_int32_t *) (a))[2] == 0 && ((u_int32_t *) (a))[3] == htonl (1))
-#endif /* !IN6_IS_ADDR_LOOPBACK */
-
-#ifndef HAVE_STRUCT_IN6_ADDR
-struct in6_addr {
-        u_int8_t                s6_addr[16];
-};
-#endif /* !HAVE_STRUCT_IN6_ADDR */
-
-#ifndef HAVE_STRUCT_SOCKADDR_IN6
-struct sockaddr_in6 {
-   unsigned short sin6_family;
-        u_int16_t sin6_port;
-        u_int32_t sin6_flowinfo;
-        struct in6_addr sin6_addr;
-};
-#endif /* !HAVE_STRUCT_SOCKADDR_IN6 */
-
-#ifndef AF_INET6
-/* Define it to something that should never appear */
-#define AF_INET6 AF_MAX
-#endif
-
-#endif /* !_FAKE_SOCKET_H */
-
diff --git a/openbsd-compat/getcwd.h b/openbsd-compat/getcwd.h
deleted file mode 100644
index 1137b3ed5..000000000
--- a/openbsd-compat/getcwd.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* $Id: getcwd.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#ifndef _BSD_GETCWD_H 
-#define _BSD_GETCWD_H
-#include "config.h"
-
-#if !defined(HAVE_GETCWD)
-
-char *getcwd(char *pt, size_t size);
-
-#endif /* !defined(HAVE_GETCWD) */
-#endif /* _BSD_GETCWD_H */
diff --git a/openbsd-compat/getgrouplist.h b/openbsd-compat/getgrouplist.h
deleted file mode 100644
index 27a9703f2..000000000
--- a/openbsd-compat/getgrouplist.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* $Id: getgrouplist.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#ifndef _BSD_GETGROUPLIST_H
-#define _BSD_GETGROUPLIST_H
-
-#include "config.h"
-
-#ifndef HAVE_GETGROUPLIST
-
-#include <grp.h>
-
-int getgrouplist(const char *, gid_t, gid_t *, int *);
-
-#endif
-
-#endif
diff --git a/openbsd-compat/getopt.h b/openbsd-compat/getopt.h
deleted file mode 100644
index 9abdae8e9..000000000
--- a/openbsd-compat/getopt.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* $Id: getopt.h,v 1.4 2001/09/18 05:05:21 djm Exp $ */
-
-#ifndef _BSDGETOPT_H
-#define _BSDGETOPT_H
-
-#include "config.h"
-
-#if !defined(HAVE_GETOPT) || !defined(HAVE_GETOPT_OPTRESET)
-
-int BSDgetopt(int argc, char * const *argv, const char *opts);
-
-#endif
-
-#endif /* _BSDGETOPT_H */
diff --git a/openbsd-compat/inet_aton.h b/openbsd-compat/inet_aton.h
deleted file mode 100644
index 9b59cb908..000000000
--- a/openbsd-compat/inet_aton.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* $Id: inet_aton.h,v 1.4 2001/07/16 02:07:51 tim Exp $ */
-
-#ifndef _BSD_INET_ATON_H
-#define _BSD_INET_ATON_H
-
-#include "config.h"
-
-#ifndef HAVE_INET_ATON
-int inet_aton(const char *cp, struct in_addr *addr);
-#endif /* HAVE_INET_ATON */
-
-#endif /* _BSD_INET_ATON_H */
diff --git a/openbsd-compat/inet_ntoa.h b/openbsd-compat/inet_ntoa.h
deleted file mode 100644
index 85bc3d6fe..000000000
--- a/openbsd-compat/inet_ntoa.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* $Id: inet_ntoa.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#ifndef _BSD_INET_NTOA_H
-#define _BSD_INET_NTOA_H
-
-#include "config.h"
-
-#if defined(BROKEN_INET_NTOA) || !defined(HAVE_INET_NTOA)
-char *inet_ntoa(struct in_addr in);
-#endif /* defined(BROKEN_INET_NTOA) || !defined(HAVE_INET_NTOA) */
-
-#endif /* _BSD_INET_NTOA_H */
diff --git a/openbsd-compat/inet_ntop.h b/openbsd-compat/inet_ntop.h
deleted file mode 100644
index c774df95c..000000000
--- a/openbsd-compat/inet_ntop.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* $Id: inet_ntop.h,v 1.4 2001/08/09 00:56:53 mouring Exp $ */
-
-#ifndef _BSD_INET_NTOP_H
-#define _BSD_INET_NTOP_H
-
-#include "config.h"
-
-#ifndef HAVE_INET_NTOP
-const char *                 
-inet_ntop(int af, const void *src, char *dst, size_t size);
-#endif /* !HAVE_INET_NTOP */
-
-#endif /* _BSD_INET_NTOP_H */
diff --git a/openbsd-compat/mktemp.h b/openbsd-compat/mktemp.h
deleted file mode 100644
index 505ca6a1f..000000000
--- a/openbsd-compat/mktemp.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* $Id: mktemp.h,v 1.3 2003/01/07 04:18:33 djm Exp $ */
-
-#ifndef _BSD_MKTEMP_H
-#define _BSD_MKTEMP_H
-
-#include "config.h"
-#if !defined(HAVE_MKDTEMP) || defined(HAVE_STRICT_MKSTEMP)
-int mkstemps(char *path, int slen);
-int mkstemp(char *path);
-char *mkdtemp(char *path);
-#endif /* !defined(HAVE_MKDTEMP) || defined(HAVE_STRICT_MKSTEMP) */
-
-#endif /* _BSD_MKTEMP_H */
diff --git a/openbsd-compat/realpath.h b/openbsd-compat/realpath.h
deleted file mode 100644
index 25e4075d7..000000000
--- a/openbsd-compat/realpath.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* $Id: realpath.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#ifndef _BSD_REALPATH_H
-#define _BSD_REALPATH_H
-
-#include "config.h"
-
-#if !defined(HAVE_REALPATH) || defined(BROKEN_REALPATH)
-
-char *realpath(const char *path, char *resolved);
-
-#endif /* !defined(HAVE_REALPATH) || defined(BROKEN_REALPATH) */
-#endif /* _BSD_REALPATH_H */
diff --git a/openbsd-compat/rresvport.h b/openbsd-compat/rresvport.h
deleted file mode 100644
index a52e4515b..000000000
--- a/openbsd-compat/rresvport.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* $Id: rresvport.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#ifndef _BSD_RRESVPORT_H
-#define _BSD_RRESVPORT_H
-
-#include "config.h"
-
-#ifndef HAVE_RRESVPORT_AF
-int rresvport_af(int *alport, sa_family_t af);
-#endif /* !HAVE_RRESVPORT_AF */
-
-#endif /* _BSD_RRESVPORT_H */
diff --git a/openbsd-compat/setenv.h b/openbsd-compat/setenv.h
deleted file mode 100644
index 77256d802..000000000
--- a/openbsd-compat/setenv.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* $Id: setenv.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#ifndef _BSD_SETENV_H
-#define _BSD_SETENV_H
-
-#include "config.h"
-
-#ifndef HAVE_SETENV
-
-int setenv(register const char *name, register const char *value, int rewrite);
-
-#endif /* !HAVE_SETENV */
-
-#endif /* _BSD_SETENV_H */
diff --git a/openbsd-compat/setproctitle.h b/openbsd-compat/setproctitle.h
deleted file mode 100644
index 48d26c6ea..000000000
--- a/openbsd-compat/setproctitle.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* $Id: setproctitle.h,v 1.3 2003/01/09 22:53:13 djm Exp $ */
-
-#ifndef _BSD_SETPROCTITLE_H
-#define _BSD_SETPROCTITLE_H
-
-#include "config.h"
-
-#ifndef HAVE_SETPROCTITLE
-void setproctitle(const char *fmt, ...);
-void compat_init_setproctitle(int argc, char *argv[]);
-#endif
-
-#endif /* _BSD_SETPROCTITLE_H */
diff --git a/openbsd-compat/strlcat.h b/openbsd-compat/strlcat.h
deleted file mode 100644
index 753668563..000000000
--- a/openbsd-compat/strlcat.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* $Id: strlcat.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#ifndef _BSD_STRLCAT_H
-#define _BSD_STRLCAT_H
-
-#include "config.h"
-#ifndef HAVE_STRLCAT
-#include <sys/types.h>
-size_t strlcat(char *dst, const char *src, size_t siz);
-#endif /* !HAVE_STRLCAT */
-
-#endif /* _BSD_STRLCAT_H */
diff --git a/openbsd-compat/strlcpy.h b/openbsd-compat/strlcpy.h
deleted file mode 100644
index 3b137670d..000000000
--- a/openbsd-compat/strlcpy.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* $Id: strlcpy.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#ifndef _BSD_STRLCPY_H
-#define _BSD_STRLCPY_H
-
-#include "config.h"
-#ifndef HAVE_STRLCPY
-#include <sys/types.h>
-size_t strlcpy(char *dst, const char *src, size_t siz);
-#endif /* !HAVE_STRLCPY */
-
-#endif /* _BSD_STRLCPY_H */
diff --git a/openbsd-compat/strmode.h b/openbsd-compat/strmode.h
deleted file mode 100644
index 64f7c8aae..000000000
--- a/openbsd-compat/strmode.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* $Id: strmode.h,v 1.3 2001/06/09 02:22:17 mouring Exp $ */
-
-#ifndef HAVE_STRMODE
-
-void strmode(register mode_t mode, register char *p);
-
-#endif
diff --git a/openbsd-compat/strsep.h b/openbsd-compat/strsep.h
deleted file mode 100644
index 6ed810ac1..000000000
--- a/openbsd-compat/strsep.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* $Id: strsep.h,v 1.2 2001/02/09 01:55:36 djm Exp $ */
-
-#ifndef _BSD_STRSEP_H
-#define _BSD_STRSEP_H
-
-#include "config.h"
-
-#ifndef HAVE_STRSEP
-char *strsep(char **stringp, const char *delim);
-#endif /* HAVE_STRSEP */
-
-#endif /* _BSD_STRSEP_H */
diff --git a/openbsd-compat/tree.h b/openbsd-compat/tree.h
deleted file mode 100644
index 30b4a8561..000000000
--- a/openbsd-compat/tree.h
+++ /dev/null
@@ -1,667 +0,0 @@
-/*
- * Copyright 2002 Niels Provos <provos@citi.umich.edu>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SYS_TREE_H_
-#define _SYS_TREE_H_
-
-/*
- * This file defines data structures for different types of trees:
- * splay trees and red-black trees.
- *
- * A splay tree is a self-organizing data structure.  Every operation
- * on the tree causes a splay to happen.  The splay moves the requested
- * node to the root of the tree and partly rebalances it.
- *
- * This has the benefit that request locality causes faster lookups as
- * the requested nodes move to the top of the tree.  On the other hand,
- * every lookup causes memory writes.
- *
- * The Balance Theorem bounds the total access time for m operations
- * and n inserts on an initially empty tree as O((m + n)lg n).  The
- * amortized cost for a sequence of m accesses to a splay tree is O(lg n);
- *
- * A red-black tree is a binary search tree with the node color as an
- * extra attribute.  It fulfills a set of conditions:
- *      - every search path from the root to a leaf consists of the
- *        same number of black nodes,
- *      - each red node (except for the root) has a black parent,
- *      - each leaf node is black.
- *
- * Every operation on a red-black tree is bounded as O(lg n).
- * The maximum height of a red-black tree is 2lg (n+1).
- */
-
-#define SPLAY_HEAD(name, type)                                          \
-struct name {                                                           \
-        struct type *sph_root; /* root of the tree */                   \
-}
-
-#define SPLAY_INITIALIZER(root)                                         \
-        { NULL }
-
-#define SPLAY_INIT(root) do {                                           \
-        (root)->sph_root = NULL;                                        \
-} while (0)
-
-#define SPLAY_ENTRY(type)                                               \
-struct {                                                                \
-        struct type *spe_left; /* left element */                       \
-        struct type *spe_right; /* right element */                     \
-}
-
-#define SPLAY_LEFT(elm, field)          (elm)->field.spe_left
-#define SPLAY_RIGHT(elm, field)         (elm)->field.spe_right
-#define SPLAY_ROOT(head)                (head)->sph_root
-#define SPLAY_EMPTY(head)               (SPLAY_ROOT(head) == NULL)
-
-/* SPLAY_ROTATE_{LEFT,RIGHT} expect that tmp hold SPLAY_{RIGHT,LEFT} */
-#define SPLAY_ROTATE_RIGHT(head, tmp, field) do {                       \
-        SPLAY_LEFT((head)->sph_root, field) = SPLAY_RIGHT(tmp, field);  \
-        SPLAY_RIGHT(tmp, field) = (head)->sph_root;                     \
-        (head)->sph_root = tmp;                                         \
-} while (0)
-        
-#define SPLAY_ROTATE_LEFT(head, tmp, field) do {                        \
-        SPLAY_RIGHT((head)->sph_root, field) = SPLAY_LEFT(tmp, field);  \
-        SPLAY_LEFT(tmp, field) = (head)->sph_root;                      \
-        (head)->sph_root = tmp;                                         \
-} while (0)
-
-#define SPLAY_LINKLEFT(head, tmp, field) do {                           \
-        SPLAY_LEFT(tmp, field) = (head)->sph_root;                      \
-        tmp = (head)->sph_root;                                         \
-        (head)->sph_root = SPLAY_LEFT((head)->sph_root, field);         \
-} while (0)
-
-#define SPLAY_LINKRIGHT(head, tmp, field) do {                          \
-        SPLAY_RIGHT(tmp, field) = (head)->sph_root;                     \
-        tmp = (head)->sph_root;                                         \
-        (head)->sph_root = SPLAY_RIGHT((head)->sph_root, field);        \
-} while (0)
-
-#define SPLAY_ASSEMBLE(head, node, left, right, field) do {             \
-        SPLAY_RIGHT(left, field) = SPLAY_LEFT((head)->sph_root, field); \
-        SPLAY_LEFT(right, field) = SPLAY_RIGHT((head)->sph_root, field);\
-        SPLAY_LEFT((head)->sph_root, field) = SPLAY_RIGHT(node, field); \
-        SPLAY_RIGHT((head)->sph_root, field) = SPLAY_LEFT(node, field); \
-} while (0)
-
-/* Generates prototypes and inline functions */
-
-#define SPLAY_PROTOTYPE(name, type, field, cmp)                         \
-void name##_SPLAY(struct name *, struct type *);                        \
-void name##_SPLAY_MINMAX(struct name *, int);                           \
-                                                                        \
-static __inline void                                                    \
-name##_SPLAY_INSERT(struct name *head, struct type *elm)                \
-{                                                                       \
-    if (SPLAY_EMPTY(head)) {                                            \
-            SPLAY_LEFT(elm, field) = SPLAY_RIGHT(elm, field) = NULL;    \
-    } else {                                                            \
-            int __comp;                                                 \
-            name##_SPLAY(head, elm);                                    \
-            __comp = (cmp)(elm, (head)->sph_root);                      \
-            if(__comp < 0) {                                            \
-                    SPLAY_LEFT(elm, field) = SPLAY_LEFT((head)->sph_root, field);\
-                    SPLAY_RIGHT(elm, field) = (head)->sph_root;         \
-                    SPLAY_LEFT((head)->sph_root, field) = NULL;         \
-            } else if (__comp > 0) {                                    \
-                    SPLAY_RIGHT(elm, field) = SPLAY_RIGHT((head)->sph_root, field);\
-                    SPLAY_LEFT(elm, field) = (head)->sph_root;          \
-                    SPLAY_RIGHT((head)->sph_root, field) = NULL;        \
-            } else                                                      \
-                    return;                                             \
-    }                                                                   \
-    (head)->sph_root = (elm);                                           \
-}                                                                       \
-                                                                        \
-static __inline void                                                    \
-name##_SPLAY_REMOVE(struct name *head, struct type *elm)                \
-{                                                                       \
-        struct type *__tmp;                                             \
-        if (SPLAY_EMPTY(head))                                          \
-                return;                                                 \
-        name##_SPLAY(head, elm);                                        \
-        if ((cmp)(elm, (head)->sph_root) == 0) {                        \
-                if (SPLAY_LEFT((head)->sph_root, field) == NULL) {      \
-                        (head)->sph_root = SPLAY_RIGHT((head)->sph_root, field);\
-                } else {                                                \
-                        __tmp = SPLAY_RIGHT((head)->sph_root, field);   \
-                        (head)->sph_root = SPLAY_LEFT((head)->sph_root, field);\
-                        name##_SPLAY(head, elm);                        \
-                        SPLAY_RIGHT((head)->sph_root, field) = __tmp;   \
-                }                                                       \
-        }                                                               \
-}                                                                       \
-                                                                        \
-/* Finds the node with the same key as elm */                           \
-static __inline struct type *                                           \
-name##_SPLAY_FIND(struct name *head, struct type *elm)                  \
-{                                                                       \
-        if (SPLAY_EMPTY(head))                                          \
-                return(NULL);                                           \
-        name##_SPLAY(head, elm);                                        \
-        if ((cmp)(elm, (head)->sph_root) == 0)                          \
-                return (head->sph_root);                                \
-        return (NULL);                                                  \
-}                                                                       \
-                                                                        \
-static __inline struct type *                                           \
-name##_SPLAY_NEXT(struct name *head, struct type *elm)                  \
-{                                                                       \
-        name##_SPLAY(head, elm);                                        \
-        if (SPLAY_RIGHT(elm, field) != NULL) {                          \
-                elm = SPLAY_RIGHT(elm, field);                          \
-                while (SPLAY_LEFT(elm, field) != NULL) {                \
-                        elm = SPLAY_LEFT(elm, field);                   \
-                }                                                       \
-        } else                                                          \
-                elm = NULL;                                             \
-        return (elm);                                                   \
-}                                                                       \
-                                                                        \
-static __inline struct type *                                           \
-name##_SPLAY_MIN_MAX(struct name *head, int val)                        \
-{                                                                       \
-        name##_SPLAY_MINMAX(head, val);                                 \
-        return (SPLAY_ROOT(head));                                      \
-}
-
-/* Main splay operation.
- * Moves node close to the key of elm to top
- */
-#define SPLAY_GENERATE(name, type, field, cmp)                          \
-void name##_SPLAY(struct name *head, struct type *elm)                  \
-{                                                                       \
-        struct type __node, *__left, *__right, *__tmp;                  \
-        int __comp;                                                     \
-\
-        SPLAY_LEFT(&__node, field) = SPLAY_RIGHT(&__node, field) = NULL;\
-        __left = __right = &__node;                                     \
-\
-        while ((__comp = (cmp)(elm, (head)->sph_root))) {               \
-                if (__comp < 0) {                                       \
-                        __tmp = SPLAY_LEFT((head)->sph_root, field);    \
-                        if (__tmp == NULL)                              \
-                                break;                                  \
-                        if ((cmp)(elm, __tmp) < 0){                     \
-                                SPLAY_ROTATE_RIGHT(head, __tmp, field); \
-                                if (SPLAY_LEFT((head)->sph_root, field) == NULL)\
-                                        break;                          \
-                        }                                               \
-                        SPLAY_LINKLEFT(head, __right, field);           \
-                } else if (__comp > 0) {                                \
-                        __tmp = SPLAY_RIGHT((head)->sph_root, field);   \
-                        if (__tmp == NULL)                              \
-                                break;                                  \
-                        if ((cmp)(elm, __tmp) > 0){                     \
-                                SPLAY_ROTATE_LEFT(head, __tmp, field);  \
-                                if (SPLAY_RIGHT((head)->sph_root, field) == NULL)\
-                                        break;                          \
-                        }                                               \
-                        SPLAY_LINKRIGHT(head, __left, field);           \
-                }                                                       \
-        }                                                               \
-        SPLAY_ASSEMBLE(head, &__node, __left, __right, field);          \
-}                                                                       \
-                                                                        \
-/* Splay with either the minimum or the maximum element                 \
- * Used to find minimum or maximum element in tree.                     \
- */                                                                     \
-void name##_SPLAY_MINMAX(struct name *head, int __comp) \
-{                                                                       \
-        struct type __node, *__left, *__right, *__tmp;                  \
-\
-        SPLAY_LEFT(&__node, field) = SPLAY_RIGHT(&__node, field) = NULL;\
-        __left = __right = &__node;                                     \
-\
-        while (1) {                                                     \
-                if (__comp < 0) {                                       \
-                        __tmp = SPLAY_LEFT((head)->sph_root, field);    \
-                        if (__tmp == NULL)                              \
-                                break;                                  \
-                        if (__comp < 0){                                \
-                                SPLAY_ROTATE_RIGHT(head, __tmp, field); \
-                                if (SPLAY_LEFT((head)->sph_root, field) == NULL)\
-                                        break;                          \
-                        }                                               \
-                        SPLAY_LINKLEFT(head, __right, field);           \
-                } else if (__comp > 0) {                                \
-                        __tmp = SPLAY_RIGHT((head)->sph_root, field);   \
-                        if (__tmp == NULL)                              \
-                                break;                                  \
-                        if (__comp > 0) {                               \
-                                SPLAY_ROTATE_LEFT(head, __tmp, field);  \
-                                if (SPLAY_RIGHT((head)->sph_root, field) == NULL)\
-                                        break;                          \
-                        }                                               \
-                        SPLAY_LINKRIGHT(head, __left, field);           \
-                }                                                       \
-        }                                                               \
-        SPLAY_ASSEMBLE(head, &__node, __left, __right, field);          \
-}
-
-#define SPLAY_NEGINF    -1
-#define SPLAY_INF       1
-
-#define SPLAY_INSERT(name, x, y)        name##_SPLAY_INSERT(x, y)
-#define SPLAY_REMOVE(name, x, y)        name##_SPLAY_REMOVE(x, y)
-#define SPLAY_FIND(name, x, y)          name##_SPLAY_FIND(x, y)
-#define SPLAY_NEXT(name, x, y)          name##_SPLAY_NEXT(x, y)
-#define SPLAY_MIN(name, x)              (SPLAY_EMPTY(x) ? NULL  \
-                                        : name##_SPLAY_MIN_MAX(x, SPLAY_NEGINF))
-#define SPLAY_MAX(name, x)              (SPLAY_EMPTY(x) ? NULL  \
-                                        : name##_SPLAY_MIN_MAX(x, SPLAY_INF))
-
-#define SPLAY_FOREACH(x, name, head)                                    \
-        for ((x) = SPLAY_MIN(name, head);                               \
-             (x) != NULL;                                               \
-             (x) = SPLAY_NEXT(name, head, x))
-
-/* Macros that define a red-back tree */
-#define RB_HEAD(name, type)                                             \
-struct name {                                                           \
-        struct type *rbh_root; /* root of the tree */                   \
-}
-
-#define RB_INITIALIZER(root)                                            \
-        { NULL }
-
-#define RB_INIT(root) do {                                              \
-        (root)->rbh_root = NULL;                                        \
-} while (0)
-
-#define RB_BLACK        0
-#define RB_RED          1
-#define RB_ENTRY(type)                                                  \
-struct {                                                                \
-        struct type *rbe_left;          /* left element */              \
-        struct type *rbe_right;         /* right element */             \
-        struct type *rbe_parent;        /* parent element */            \
-        int rbe_color;                  /* node color */                \
-}
-
-#define RB_LEFT(elm, field)             (elm)->field.rbe_left
-#define RB_RIGHT(elm, field)            (elm)->field.rbe_right
-#define RB_PARENT(elm, field)           (elm)->field.rbe_parent
-#define RB_COLOR(elm, field)            (elm)->field.rbe_color
-#define RB_ROOT(head)                   (head)->rbh_root
-#define RB_EMPTY(head)                  (RB_ROOT(head) == NULL)
-
-#define RB_SET(elm, parent, field) do {                                 \
-        RB_PARENT(elm, field) = parent;                                 \
-        RB_LEFT(elm, field) = RB_RIGHT(elm, field) = NULL;              \
-        RB_COLOR(elm, field) = RB_RED;                                  \
-} while (0)
-
-#define RB_SET_BLACKRED(black, red, field) do {                         \
-        RB_COLOR(black, field) = RB_BLACK;                              \
-        RB_COLOR(red, field) = RB_RED;                                  \
-} while (0)
-
-#ifndef RB_AUGMENT
-#define RB_AUGMENT(x)
-#endif
-
-#define RB_ROTATE_LEFT(head, elm, tmp, field) do {                      \
-        (tmp) = RB_RIGHT(elm, field);                                   \
-        if ((RB_RIGHT(elm, field) = RB_LEFT(tmp, field))) {             \
-                RB_PARENT(RB_LEFT(tmp, field), field) = (elm);          \
-        }                                                               \
-        RB_AUGMENT(elm);                                                \
-        if ((RB_PARENT(tmp, field) = RB_PARENT(elm, field))) {          \
-                if ((elm) == RB_LEFT(RB_PARENT(elm, field), field))     \
-                        RB_LEFT(RB_PARENT(elm, field), field) = (tmp);  \
-                else                                                    \
-                        RB_RIGHT(RB_PARENT(elm, field), field) = (tmp); \
-                RB_AUGMENT(RB_PARENT(elm, field));                      \
-        } else                                                          \
-                (head)->rbh_root = (tmp);                               \
-        RB_LEFT(tmp, field) = (elm);                                    \
-        RB_PARENT(elm, field) = (tmp);                                  \
-        RB_AUGMENT(tmp);                                                \
-} while (0)
-
-#define RB_ROTATE_RIGHT(head, elm, tmp, field) do {                     \
-        (tmp) = RB_LEFT(elm, field);                                    \
-        if ((RB_LEFT(elm, field) = RB_RIGHT(tmp, field))) {             \
-                RB_PARENT(RB_RIGHT(tmp, field), field) = (elm);         \
-        }                                                               \
-        RB_AUGMENT(elm);                                                \
-        if ((RB_PARENT(tmp, field) = RB_PARENT(elm, field))) {          \
-                if ((elm) == RB_LEFT(RB_PARENT(elm, field), field))     \
-                        RB_LEFT(RB_PARENT(elm, field), field) = (tmp);  \
-                else                                                    \
-                        RB_RIGHT(RB_PARENT(elm, field), field) = (tmp); \
-                RB_AUGMENT(RB_PARENT(elm, field));                      \
-        } else                                                          \
-                (head)->rbh_root = (tmp);                               \
-        RB_RIGHT(tmp, field) = (elm);                                   \
-        RB_PARENT(elm, field) = (tmp);                                  \
-        RB_AUGMENT(tmp);                                                \
-} while (0)
-
-/* Generates prototypes and inline functions */
-#define RB_PROTOTYPE(name, type, field, cmp)                            \
-void name##_RB_INSERT_COLOR(struct name *, struct type *);      \
-void name##_RB_REMOVE_COLOR(struct name *, struct type *, struct type *);\
-void name##_RB_REMOVE(struct name *, struct type *);                    \
-struct type *name##_RB_INSERT(struct name *, struct type *);            \
-struct type *name##_RB_FIND(struct name *, struct type *);              \
-struct type *name##_RB_NEXT(struct name *, struct type *);              \
-struct type *name##_RB_MINMAX(struct name *, int);                      \
-                                                                        \
-
-/* Main rb operation.
- * Moves node close to the key of elm to top
- */
-#define RB_GENERATE(name, type, field, cmp)                             \
-void                                                                    \
-name##_RB_INSERT_COLOR(struct name *head, struct type *elm)             \
-{                                                                       \
-        struct type *parent, *gparent, *tmp;                            \
-        while ((parent = RB_PARENT(elm, field)) &&                      \
-            RB_COLOR(parent, field) == RB_RED) {                        \
-                gparent = RB_PARENT(parent, field);                     \
-                if (parent == RB_LEFT(gparent, field)) {                \
-                        tmp = RB_RIGHT(gparent, field);                 \
-                        if (tmp && RB_COLOR(tmp, field) == RB_RED) {    \
-                                RB_COLOR(tmp, field) = RB_BLACK;        \
-                                RB_SET_BLACKRED(parent, gparent, field);\
-                                elm = gparent;                          \
-                                continue;                               \
-                        }                                               \
-                        if (RB_RIGHT(parent, field) == elm) {           \
-                                RB_ROTATE_LEFT(head, parent, tmp, field);\
-                                tmp = parent;                           \
-                                parent = elm;                           \
-                                elm = tmp;                              \
-                        }                                               \
-                        RB_SET_BLACKRED(parent, gparent, field);        \
-                        RB_ROTATE_RIGHT(head, gparent, tmp, field);     \
-                } else {                                                \
-                        tmp = RB_LEFT(gparent, field);                  \
-                        if (tmp && RB_COLOR(tmp, field) == RB_RED) {    \
-                                RB_COLOR(tmp, field) = RB_BLACK;        \
-                                RB_SET_BLACKRED(parent, gparent, field);\
-                                elm = gparent;                          \
-                                continue;                               \
-                        }                                               \
-                        if (RB_LEFT(parent, field) == elm) {            \
-                                RB_ROTATE_RIGHT(head, parent, tmp, field);\
-                                tmp = parent;                           \
-                                parent = elm;                           \
-                                elm = tmp;                              \
-                        }                                               \
-                        RB_SET_BLACKRED(parent, gparent, field);        \
-                        RB_ROTATE_LEFT(head, gparent, tmp, field);      \
-                }                                                       \
-        }                                                               \
-        RB_COLOR(head->rbh_root, field) = RB_BLACK;                     \
-}                                                                       \
-                                                                        \
-void                                                                    \
-name##_RB_REMOVE_COLOR(struct name *head, struct type *parent, struct type *elm) \
-{                                                                       \
-        struct type *tmp;                                               \
-        while ((elm == NULL || RB_COLOR(elm, field) == RB_BLACK) &&     \
-            elm != RB_ROOT(head)) {                                     \
-                if (RB_LEFT(parent, field) == elm) {                    \
-                        tmp = RB_RIGHT(parent, field);                  \
-                        if (RB_COLOR(tmp, field) == RB_RED) {           \
-                                RB_SET_BLACKRED(tmp, parent, field);    \
-                                RB_ROTATE_LEFT(head, parent, tmp, field);\
-                                tmp = RB_RIGHT(parent, field);          \
-                        }                                               \
-                        if ((RB_LEFT(tmp, field) == NULL ||             \
-                            RB_COLOR(RB_LEFT(tmp, field), field) == RB_BLACK) &&\
-                            (RB_RIGHT(tmp, field) == NULL ||            \
-                            RB_COLOR(RB_RIGHT(tmp, field), field) == RB_BLACK)) {\
-                                RB_COLOR(tmp, field) = RB_RED;          \
-                                elm = parent;                           \
-                                parent = RB_PARENT(elm, field);         \
-                        } else {                                        \
-                                if (RB_RIGHT(tmp, field) == NULL ||     \
-                                    RB_COLOR(RB_RIGHT(tmp, field), field) == RB_BLACK) {\
-                                        struct type *oleft;             \
-                                        if ((oleft = RB_LEFT(tmp, field)))\
-                                                RB_COLOR(oleft, field) = RB_BLACK;\
-                                        RB_COLOR(tmp, field) = RB_RED;  \
-                                        RB_ROTATE_RIGHT(head, tmp, oleft, field);\
-                                        tmp = RB_RIGHT(parent, field);  \
-                                }                                       \
-                                RB_COLOR(tmp, field) = RB_COLOR(parent, field);\
-                                RB_COLOR(parent, field) = RB_BLACK;     \
-                                if (RB_RIGHT(tmp, field))               \
-                                        RB_COLOR(RB_RIGHT(tmp, field), field) = RB_BLACK;\
-                                RB_ROTATE_LEFT(head, parent, tmp, field);\
-                                elm = RB_ROOT(head);                    \
-                                break;                                  \
-                        }                                               \
-                } else {                                                \
-                        tmp = RB_LEFT(parent, field);                   \
-                        if (RB_COLOR(tmp, field) == RB_RED) {           \
-                                RB_SET_BLACKRED(tmp, parent, field);    \
-                                RB_ROTATE_RIGHT(head, parent, tmp, field);\
-                                tmp = RB_LEFT(parent, field);           \
-                        }                                               \
-                        if ((RB_LEFT(tmp, field) == NULL ||             \
-                            RB_COLOR(RB_LEFT(tmp, field), field) == RB_BLACK) &&\
-                            (RB_RIGHT(tmp, field) == NULL ||            \
-                            RB_COLOR(RB_RIGHT(tmp, field), field) == RB_BLACK)) {\
-                                RB_COLOR(tmp, field) = RB_RED;          \
-                                elm = parent;                           \
-                                parent = RB_PARENT(elm, field);         \
-                        } else {                                        \
-                                if (RB_LEFT(tmp, field) == NULL ||      \
-                                    RB_COLOR(RB_LEFT(tmp, field), field) == RB_BLACK) {\
-                                        struct type *oright;            \
-                                        if ((oright = RB_RIGHT(tmp, field)))\
-                                                RB_COLOR(oright, field) = RB_BLACK;\
-                                        RB_COLOR(tmp, field) = RB_RED;  \
-                                        RB_ROTATE_LEFT(head, tmp, oright, field);\
-                                        tmp = RB_LEFT(parent, field);   \
-                                }                                       \
-                                RB_COLOR(tmp, field) = RB_COLOR(parent, field);\
-                                RB_COLOR(parent, field) = RB_BLACK;     \
-                                if (RB_LEFT(tmp, field))                \
-                                        RB_COLOR(RB_LEFT(tmp, field), field) = RB_BLACK;\
-                                RB_ROTATE_RIGHT(head, parent, tmp, field);\
-                                elm = RB_ROOT(head);                    \
-                                break;                                  \
-                        }                                               \
-                }                                                       \
-        }                                                               \
-        if (elm)                                                        \
-                RB_COLOR(elm, field) = RB_BLACK;                        \
-}                                                                       \
-                                                                        \
-void                                                                    \
-name##_RB_REMOVE(struct name *head, struct type *elm)                   \
-{                                                                       \
-        struct type *child, *parent;                                    \
-        int color;                                                      \
-        if (RB_LEFT(elm, field) == NULL)                                \
-                child = RB_RIGHT(elm, field);                           \
-        else if (RB_RIGHT(elm, field) == NULL)                          \
-                child = RB_LEFT(elm, field);                            \
-        else {                                                          \
-                struct type *old = elm, *left;                          \
-                elm = RB_RIGHT(elm, field);                             \
-                while ((left = RB_LEFT(elm, field)))                    \
-                        elm = left;                                     \
-                child = RB_RIGHT(elm, field);                           \
-                parent = RB_PARENT(elm, field);                         \
-                color = RB_COLOR(elm, field);                           \
-                if (child)                                              \
-                        RB_PARENT(child, field) = parent;               \
-                if (parent) {                                           \
-                        if (RB_LEFT(parent, field) == elm)              \
-                                RB_LEFT(parent, field) = child;         \
-                        else                                            \
-                                RB_RIGHT(parent, field) = child;        \
-                        RB_AUGMENT(parent);                             \
-                } else                                                  \
-                        RB_ROOT(head) = child;                          \
-                if (RB_PARENT(elm, field) == old)                       \
-                        parent = elm;                                   \
-                (elm)->field = (old)->field;                            \
-                if (RB_PARENT(old, field)) {                            \
-                        if (RB_LEFT(RB_PARENT(old, field), field) == old)\
-                                RB_LEFT(RB_PARENT(old, field), field) = elm;\
-                        else                                            \
-                                RB_RIGHT(RB_PARENT(old, field), field) = elm;\
-                        RB_AUGMENT(RB_PARENT(old, field));              \
-                } else                                                  \
-                        RB_ROOT(head) = elm;                            \
-                RB_PARENT(RB_LEFT(old, field), field) = elm;            \
-                if (RB_RIGHT(old, field))                               \
-                        RB_PARENT(RB_RIGHT(old, field), field) = elm;   \
-                if (parent) {                                           \
-                        left = parent;                                  \
-                        do {                                            \
-                                RB_AUGMENT(left);                       \
-                        } while ((left = RB_PARENT(left, field)));      \
-                }                                                       \
-                goto color;                                             \
-        }                                                               \
-        parent = RB_PARENT(elm, field);                                 \
-        color = RB_COLOR(elm, field);                                   \
-        if (child)                                                      \
-                RB_PARENT(child, field) = parent;                       \
-        if (parent) {                                                   \
-                if (RB_LEFT(parent, field) == elm)                      \
-                        RB_LEFT(parent, field) = child;                 \
-                else                                                    \
-                        RB_RIGHT(parent, field) = child;                \
-                RB_AUGMENT(parent);                                     \
-        } else                                                          \
-                RB_ROOT(head) = child;                                  \
-color:                                                                  \
-        if (color == RB_BLACK)                                          \
-                name##_RB_REMOVE_COLOR(head, parent, child);            \
-}                                                                       \
-                                                                        \
-/* Inserts a node into the RB tree */                                   \
-struct type *                                                           \
-name##_RB_INSERT(struct name *head, struct type *elm)                   \
-{                                                                       \
-        struct type *tmp;                                               \
-        struct type *parent = NULL;                                     \
-        int comp = 0;                                                   \
-        tmp = RB_ROOT(head);                                            \
-        while (tmp) {                                                   \
-                parent = tmp;                                           \
-                comp = (cmp)(elm, parent);                              \
-                if (comp < 0)                                           \
-                        tmp = RB_LEFT(tmp, field);                      \
-                else if (comp > 0)                                      \
-                        tmp = RB_RIGHT(tmp, field);                     \
-                else                                                    \
-                        return (tmp);                                   \
-        }                                                               \
-        RB_SET(elm, parent, field);                                     \
-        if (parent != NULL) {                                           \
-                if (comp < 0)                                           \
-                        RB_LEFT(parent, field) = elm;                   \
-                else                                                    \
-                        RB_RIGHT(parent, field) = elm;                  \
-                RB_AUGMENT(parent);                                     \
-        } else                                                          \
-                RB_ROOT(head) = elm;                                    \
-        name##_RB_INSERT_COLOR(head, elm);                              \
-        return (NULL);                                                  \
-}                                                                       \
-                                                                        \
-/* Finds the node with the same key as elm */                           \
-struct type *                                                           \
-name##_RB_FIND(struct name *head, struct type *elm)                     \
-{                                                                       \
-        struct type *tmp = RB_ROOT(head);                               \
-        int comp;                                                       \
-        while (tmp) {                                                   \
-                comp = cmp(elm, tmp);                                   \
-                if (comp < 0)                                           \
-                        tmp = RB_LEFT(tmp, field);                      \
-                else if (comp > 0)                                      \
-                        tmp = RB_RIGHT(tmp, field);                     \
-                else                                                    \
-                        return (tmp);                                   \
-        }                                                               \
-        return (NULL);                                                  \
-}                                                                       \
-                                                                        \
-struct type *                                                           \
-name##_RB_NEXT(struct name *head, struct type *elm)                     \
-{                                                                       \
-        if (RB_RIGHT(elm, field)) {                                     \
-                elm = RB_RIGHT(elm, field);                             \
-                while (RB_LEFT(elm, field))                             \
-                        elm = RB_LEFT(elm, field);                      \
-        } else {                                                        \
-                if (RB_PARENT(elm, field) &&                            \
-                    (elm == RB_LEFT(RB_PARENT(elm, field), field)))     \
-                        elm = RB_PARENT(elm, field);                    \
-                else {                                                  \
-                        while (RB_PARENT(elm, field) &&                 \
-                            (elm == RB_RIGHT(RB_PARENT(elm, field), field)))\
-                                elm = RB_PARENT(elm, field);            \
-                        elm = RB_PARENT(elm, field);                    \
-                }                                                       \
-        }                                                               \
-        return (elm);                                                   \
-}                                                                       \
-                                                                        \
-struct type *                                                           \
-name##_RB_MINMAX(struct name *head, int val)                            \
-{                                                                       \
-        struct type *tmp = RB_ROOT(head);                               \
-        struct type *parent = NULL;                                     \
-        while (tmp) {                                                   \
-                parent = tmp;                                           \
-                if (val < 0)                                            \
-                        tmp = RB_LEFT(tmp, field);                      \
-                else                                                    \
-                        tmp = RB_RIGHT(tmp, field);                     \
-        }                                                               \
-        return (parent);                                                \
-}
-
-#define RB_NEGINF       -1
-#define RB_INF  1
-
-#define RB_INSERT(name, x, y)   name##_RB_INSERT(x, y)
-#define RB_REMOVE(name, x, y)   name##_RB_REMOVE(x, y)
-#define RB_FIND(name, x, y)     name##_RB_FIND(x, y)
-#define RB_NEXT(name, x, y)     name##_RB_NEXT(x, y)
-#define RB_MIN(name, x)         name##_RB_MINMAX(x, RB_NEGINF)
-#define RB_MAX(name, x)         name##_RB_MINMAX(x, RB_INF)
-
-#define RB_FOREACH(x, name, head)                                       \
-        for ((x) = RB_MIN(name, head);                                  \
-             (x) != NULL;                                               \
-             (x) = name##_RB_NEXT(head, x))
-
-#endif  /* _SYS_TREE_H_ */
diff --git a/openbsd-compat/xmmap.h b/openbsd-compat/xmmap.h
deleted file mode 100644
index c0fa04aca..000000000
--- a/openbsd-compat/xmmap.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-void *xmmap(size_t size);
diff --git a/packet.c b/packet.c
index 82a569404..b062c0436 100644
--- a/packet.c
+++ b/packet.c
@@ -79,6 +79,8 @@ RCSID("$OpenBSD: packet.c,v 1.115 2004/06/21 17:36:31 avsm Exp $");
 static int connection_in = -1;
 static int connection_out = -1;
 
+static int setup_timeout = -1;
+
 /* Protocol flags for the remote side. */
 static u_int remote_protocol_flags = 0;
 
@@ -146,7 +148,7 @@ TAILQ_HEAD(, packet) outgoing;
  * packet_set_encryption_key is called.
  */
 void
-packet_set_connection(int fd_in, int fd_out)
+packet_set_connection(int fd_in, int fd_out, int new_setup_timeout)
 {
         Cipher *none = cipher_by_name("none");
 
@@ -154,6 +156,7 @@ packet_set_connection(int fd_in, int fd_out)
                 fatal("packet_set_connection: cannot load cipher 'none'");
         connection_in = fd_in;
         connection_out = fd_out;
+        setup_timeout = new_setup_timeout;
         cipher_init(&send_context, none, (const u_char *)"",
             0, NULL, 0, CIPHER_ENCRYPT);
         cipher_init(&receive_context, none, (const u_char *)"",
@@ -827,6 +830,7 @@ packet_read_seqnr(u_int32_t *seqnr_p)
         int type, len;
         fd_set *setp;
         char buf[8192];
+        struct timeval tv, *tvp;
         DBG(debug("packet_read()"));
 
         setp = (fd_set *)xmalloc(howmany(connection_in+1, NFDBITS) *
@@ -858,11 +862,21 @@ packet_read_seqnr(u_int32_t *seqnr_p)
                     sizeof(fd_mask));
                 FD_SET(connection_in, setp);
 
+                if (setup_timeout > 0) {
+                  tvp = &tv;
+                  tv.tv_sec = setup_timeout;
+                  tv.tv_usec = 0;
+                } else
+                  tvp = 0;
+
                 /* Wait for some data to arrive. */
-                while (select(connection_in + 1, setp, NULL, NULL, NULL) == -1 &&
+                while (select(connection_in + 1, setp, NULL, NULL, tvp) == -1 &&
                     (errno == EAGAIN || errno == EINTR))
                         ;
 
+                if (!FD_ISSET(connection_in, setp))
+                  fatal("packet_read: Setup timeout expired, giving up");
+
                 /* Read data from the socket. */
                 len = read(connection_in, buf, sizeof(buf));
                 if (len == 0) {
diff --git a/packet.h b/packet.h
index 37f82f2f6..fb7b3c05a 100644
--- a/packet.h
+++ b/packet.h
@@ -18,7 +18,7 @@
 
 #include <openssl/bn.h>
 
-void     packet_set_connection(int, int);
+void     packet_set_connection(int, int, int);
 void     packet_set_nonblocking(void);
 int      packet_get_connection_in(void);
 int      packet_get_connection_out(void);
diff --git a/radix.c b/radix.c
deleted file mode 100644
index c680d6bf3..000000000
--- a/radix.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Copyright (c) 1999 Dug Song.  All rights reserved.
- * Copyright (c) 2002 Markus Friedl.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "includes.h"
-#include "uuencode.h"
-
-RCSID("$OpenBSD: radix.c,v 1.22 2002/09/09 14:54:15 markus Exp $");
-
-#ifdef AFS
-#include <krb.h>
-
-#include <radix.h>
-#include "bufaux.h"
-
-int
-creds_to_radix(CREDENTIALS *creds, u_char *buf, size_t buflen)
-{
-        Buffer b;
-        int ret;
-
-        buffer_init(&b);
-
-        buffer_put_char(&b, 1); /* version */
-
-        buffer_append(&b, creds->service, strlen(creds->service));
-        buffer_put_char(&b, '\0');
-        buffer_append(&b, creds->instance, strlen(creds->instance));
-        buffer_put_char(&b, '\0');
-        buffer_append(&b, creds->realm, strlen(creds->realm));
-        buffer_put_char(&b, '\0');
-        buffer_append(&b, creds->pname, strlen(creds->pname));
-        buffer_put_char(&b, '\0');
-        buffer_append(&b, creds->pinst, strlen(creds->pinst));
-        buffer_put_char(&b, '\0');
-
-        /* Null string to repeat the realm. */
-        buffer_put_char(&b, '\0');
-
-        buffer_put_int(&b, creds->issue_date);
-        buffer_put_int(&b, krb_life_to_time(creds->issue_date,
-            creds->lifetime));
-        buffer_append(&b, creds->session, sizeof(creds->session));
-        buffer_put_short(&b, creds->kvno);
-
-        /* 32 bit size + data */
-        buffer_put_string(&b, creds->ticket_st.dat, creds->ticket_st.length);
-
-        ret = uuencode(buffer_ptr(&b), buffer_len(&b), (char *)buf, buflen);
-
-        buffer_free(&b);
-        return ret;
-}
-
-#define GETSTRING(b, t, tlen) \
-        do { \
-                int i, found = 0; \
-                for (i = 0; i < tlen; i++) { \
-                        if (buffer_len(b) == 0) \
-                                goto done; \
-                        t[i] = buffer_get_char(b); \
-                        if (t[i] == '\0') { \
-                                found = 1; \
-                                break; \
-                        } \
-                } \
-                if (!found) \
-                        goto done; \
-        } while(0)
-
-int
-radix_to_creds(const char *buf, CREDENTIALS *creds)
-{
-        Buffer b;
-        u_char *space;
-        char c, version, *p;
-        u_int endTime, len;
-        int blen, ret;
-
-        ret = 0;
-        blen = strlen(buf);
-
-        /* sanity check for size */
-        if (blen > 8192)
-                return 0;
-
-        buffer_init(&b);
-        space = buffer_append_space(&b, blen);
-
-        /* check version and length! */
-        len = uudecode(buf, space, blen);
-        if (len < 1)
-                goto done;
-
-        version = buffer_get_char(&b);
-
-        GETSTRING(&b, creds->service, sizeof creds->service);
-        GETSTRING(&b, creds->instance, sizeof creds->instance);
-        GETSTRING(&b, creds->realm, sizeof creds->realm);
-        GETSTRING(&b, creds->pname, sizeof creds->pname);
-        GETSTRING(&b, creds->pinst, sizeof creds->pinst);
-
-        if (buffer_len(&b) == 0)
-                goto done;
-
-        /* Ignore possibly different realm. */
-        while (buffer_len(&b) > 0 && (c = buffer_get_char(&b)) != '\0')
-                ;
-
-        if (buffer_len(&b) == 0)
-                goto done;
-
-        creds->issue_date = buffer_get_int(&b);
-
-        endTime = buffer_get_int(&b);
-        creds->lifetime = krb_time_to_life(creds->issue_date, endTime);
-
-        len = buffer_len(&b);
-        if (len < sizeof(creds->session))
-                goto done;
-        memcpy(&creds->session, buffer_ptr(&b), sizeof(creds->session));
-        buffer_consume(&b, sizeof(creds->session));
-
-        creds->kvno = buffer_get_short(&b);
-
-        p = buffer_get_string(&b, &len);
-        if (len < 0 || len > sizeof(creds->ticket_st.dat))
-                goto done;
-        memcpy(&creds->ticket_st.dat, p, len);
-        creds->ticket_st.length = len;
-
-        ret = 1;
-done:
-        buffer_free(&b);
-        return ret;
-}
-#endif /* AFS */
diff --git a/radix.h b/radix.h
deleted file mode 100644
index e94e4acc6..000000000
--- a/radix.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*      $OpenBSD: radix.h,v 1.4 2001/06/26 17:27:24 markus Exp $        */
-
-/*
- * Copyright (c) 1999 Dug Song.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-int      creds_to_radix(CREDENTIALS *, u_char *, size_t);
-int      radix_to_creds(const char *, CREDENTIALS *);
diff --git a/readconf.c b/readconf.c
index a4fe1fe02..aca5b8eff 100644
--- a/readconf.c
+++ b/readconf.c
@@ -107,6 +107,7 @@ typedef enum {
         oAddressFamily, oGssAuthentication, oGssDelegateCreds,
         oServerAliveInterval, oServerAliveCountMax, oIdentitiesOnly,
         oSendEnv, oControlPath, oControlMaster,
+        oProtocolKeepAlives, oSetupTimeOut,
         oDeprecated, oUnsupported
 } OpCodes;
 
@@ -197,6 +198,8 @@ static struct {
         { "sendenv", oSendEnv },
         { "controlpath", oControlPath },
         { "controlmaster", oControlMaster },
+        { "protocolkeepalives", oProtocolKeepAlives },
+        { "setuptimeout", oSetupTimeOut },
         { NULL, oBadOption }
 };
 
@@ -746,6 +749,7 @@ parse_int:
                 goto parse_flag;
 
         case oServerAliveInterval:
+        case oProtocolKeepAlives: /* Debian-specific compatibility alias */
                 intptr = &options->server_alive_interval;
                 goto parse_time;
 
@@ -774,6 +778,10 @@ parse_int:
                 intptr = &options->control_master;
                 goto parse_yesnoask;
 
+        case oSetupTimeOut:
+                intptr = &options->setuptimeout;
+                goto parse_int;
+
         case oDeprecated:
                 debug("%s line %d: Deprecated option \"%s\"",
                     filename, linenum, keyword);
@@ -879,6 +887,7 @@ initialize_options(Options * options)
         options->strict_host_key_checking = -1;
         options->compression = -1;
         options->tcp_keep_alive = -1;
+        options->setuptimeout = -1;
         options->compression_level = -1;
         options->port = -1;
         options->address_family = -1;
@@ -934,7 +943,7 @@ fill_default_options(Options * options)
         if (options->forward_x11 == -1)
                 options->forward_x11 = 0;
         if (options->forward_x11_trusted == -1)
-                options->forward_x11_trusted = 0;
+                options->forward_x11_trusted = 1;
         if (options->xauth_location == NULL)
                 options->xauth_location = _PATH_XAUTH;
         if (options->gateway_ports == -1)
@@ -1033,12 +1042,24 @@ fill_default_options(Options * options)
                 options->rekey_limit = 0;
         if (options->verify_host_key_dns == -1)
                 options->verify_host_key_dns = 0;
-        if (options->server_alive_interval == -1)
-                options->server_alive_interval = 0;
+        if (options->server_alive_interval == -1) {
+                /* in batch mode, default is 5mins */
+                if (options->batch_mode == 1)
+                        options->server_alive_interval = 300;
+                else
+                        options->server_alive_interval = 0;
+        }
         if (options->server_alive_count_max == -1)
                 options->server_alive_count_max = 3;
         if (options->control_master == -1)
                 options->control_master = 0;
+        if (options->setuptimeout == -1) {
+                /* in batch mode, default is 5mins */
+                if (options->batch_mode == 1)
+                        options->setuptimeout = 300;
+                else
+                        options->setuptimeout = 0;
+        }
         /* options->proxy_command should not be set by default */
         /* options->user will be set in the main program if appropriate */
         /* options->hostname will be set in the main program if appropriate */
diff --git a/readconf.h b/readconf.h
index ded422585..2f4908f4e 100644
--- a/readconf.h
+++ b/readconf.h
@@ -56,6 +56,7 @@ typedef struct {
         int     compression_level;      /* Compression level 1 (fast) to 9
                                          * (best). */
         int     tcp_keep_alive; /* Set SO_KEEPALIVE. */
+        int     setuptimeout; /* timeout in the protocol banner exchange */
         LogLevel log_level;     /* Level for logging. */
 
         int     port;           /* Port to connect. */
diff --git a/readpass.h b/readpass.h
deleted file mode 100644
index a45d32f2a..000000000
--- a/readpass.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*      $OpenBSD: readpass.h,v 1.7 2002/03/26 15:58:46 markus Exp $     */
-
-/*
- * Author: Tatu Ylonen <ylo@cs.hut.fi>
- * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
- *                    All rights reserved
- *
- * As far as I am concerned, the code I have written for this software
- * can be used freely for any purpose.  Any derived versions of this
- * software must be clearly marked as such, and if the derived work is
- * incompatible with the protocol description in the RFC file, it must be
- * called by a name other than "ssh" or "Secure Shell".
- */
-
-#define RP_ECHO                 0x0001
-#define RP_ALLOW_STDIN          0x0002
-#define RP_ALLOW_EOF            0x0004
-
-char    *read_passphrase(const char *, int);
diff --git a/regress/authorized_keys_root b/regress/authorized_keys_root
deleted file mode 100644
index 328537120..000000000
--- a/regress/authorized_keys_root
+++ /dev/null
@@ -1,2 +0,0 @@
-ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAt6ttBacbgvLPsF1VWWfT51t55/5Mj62Xp8EaoH5SNSaLiGIgrrja077lKEept75U4uKFUYU5JJX9GPE9A7Y43LXv+/A6Jm4rEj/U0s4H8tf0UmzVC3t6xh0sRK0hYVNILyoHnIAgdY8CmOiybw7p6DxJY8MRAehD3n9+kFcachU= root@xenon
-1024 35 132789427207755621599908461558918671787816692978751485815532032934821830960131244604702969298486352138126114080367609979552547448841583955126231410604842765726397407176910594168641969541792069550006878863592030567875913190224374005367884774859544943329148178663694126456638431428703289837638970464685771819219 root@xenon
diff --git a/regress/copy.1 b/regress/copy.1
deleted file mode 100755
index 92d4d20f9..000000000
--- a/regress/copy.1
+++ /dev/null
diff --git a/regress/copy.2 b/regress/copy.2
deleted file mode 100755
index 92d4d20f9..000000000
--- a/regress/copy.2
+++ /dev/null
diff --git a/scard/.cvsignore b/scard/.cvsignore
index 5349d34ae..f3c7a7c5d 100644
--- a/scard/.cvsignore
+++ b/scard/.cvsignore
@@ -1,2 +1 @@
 Makefile
-Ssh.bin
diff --git a/serverloop.c b/serverloop.c
index eee1e7959..48bea96a1 100644
--- a/serverloop.c
+++ b/serverloop.c
@@ -608,7 +608,7 @@ server_loop(pid_t pid, int fdin_arg, int fdout_arg, int fderr_arg)
                         if (!channel_still_open())
                                 break;
                         if (!waiting_termination) {
-                                const char *s = "Waiting for forwarded connections to terminate...\r\n";
+                                const char *s = "Waiting for forwarded connections to terminate... (press ~& to background)\r\n";
                                 char *cp;
                                 waiting_termination = 1;
                                 buffer_append(&stderr_buffer, s, strlen(s));
diff --git a/sftp-glob.h b/sftp-glob.h
deleted file mode 100644
index f879e8719..000000000
--- a/sftp-glob.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* $OpenBSD: sftp-glob.h,v 1.8 2002/09/11 22:41:50 djm Exp $ */
-
-/*
- * Copyright (c) 2001,2002 Damien Miller.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* Remote sftp filename globbing */
-
-#ifndef _SFTP_GLOB_H
-#define _SFTP_GLOB_H
-
-#include "sftp-client.h"
-
-int remote_glob(struct sftp_conn *, const char *, int,
-    int (*)(const char *, int), glob_t *);
-
-#endif
diff --git a/sftp-int.c b/sftp-int.c
deleted file mode 100644
index c93eaabff..000000000
--- a/sftp-int.c
+++ /dev/null
@@ -1,1191 +0,0 @@
-/*
- * Copyright (c) 2001,2002 Damien Miller.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* XXX: recursive operations */
-
-#include "includes.h"
-RCSID("$OpenBSD: sftp-int.c,v 1.62 2003/08/25 08:13:09 fgsch Exp $");
-
-#include "buffer.h"
-#include "xmalloc.h"
-#include "log.h"
-#include "pathnames.h"
-
-#include "sftp.h"
-#include "sftp-common.h"
-#include "sftp-glob.h"
-#include "sftp-client.h"
-#include "sftp-int.h"
-
-/* File to read commands from */
-extern FILE *infile;
-
-/* Size of buffer used when copying files */
-extern size_t copy_buffer_len;
-
-/* Number of concurrent outstanding requests */
-extern int num_requests;
-
-/* This is set to 0 if the progressmeter is not desired. */
-int showprogress = 1;
-
-/* Seperators for interactive commands */
-#define WHITESPACE " \t\r\n"
-
-/* Define what type of ls view (0 - multi-column) */
-#define LONG_VIEW 1             /* Full view ala ls -l */
-#define SHORT_VIEW 2            /* Single row view ala ls -1 */
-
-/* Commands for interactive mode */
-#define I_CHDIR         1
-#define I_CHGRP         2
-#define I_CHMOD         3
-#define I_CHOWN         4
-#define I_GET           5
-#define I_HELP          6
-#define I_LCHDIR        7
-#define I_LLS           8
-#define I_LMKDIR        9
-#define I_LPWD          10
-#define I_LS            11
-#define I_LUMASK        12
-#define I_MKDIR         13
-#define I_PUT           14
-#define I_PWD           15
-#define I_QUIT          16
-#define I_RENAME        17
-#define I_RM            18
-#define I_RMDIR         19
-#define I_SHELL         20
-#define I_SYMLINK       21
-#define I_VERSION       22
-#define I_PROGRESS      23
-
-struct CMD {
-        const char *c;
-        const int n;
-};
-
-static const struct CMD cmds[] = {
-        { "bye",        I_QUIT },
-        { "cd",         I_CHDIR },
-        { "chdir",      I_CHDIR },
-        { "chgrp",      I_CHGRP },
-        { "chmod",      I_CHMOD },
-        { "chown",      I_CHOWN },
-        { "dir",        I_LS },
-        { "exit",       I_QUIT },
-        { "get",        I_GET },
-        { "mget",       I_GET },
-        { "help",       I_HELP },
-        { "lcd",        I_LCHDIR },
-        { "lchdir",     I_LCHDIR },
-        { "lls",        I_LLS },
-        { "lmkdir",     I_LMKDIR },
-        { "ln",         I_SYMLINK },
-        { "lpwd",       I_LPWD },
-        { "ls",         I_LS },
-        { "lumask",     I_LUMASK },
-        { "mkdir",      I_MKDIR },
-        { "progress",   I_PROGRESS },
-        { "put",        I_PUT },
-        { "mput",       I_PUT },
-        { "pwd",        I_PWD },
-        { "quit",       I_QUIT },
-        { "rename",     I_RENAME },
-        { "rm",         I_RM },
-        { "rmdir",      I_RMDIR },
-        { "symlink",    I_SYMLINK },
-        { "version",    I_VERSION },
-        { "!",          I_SHELL },
-        { "?",          I_HELP },
-        { NULL,                 -1}
-};
-
-static void
-help(void)
-{
-        printf("Available commands:\n");
-        printf("cd path                       Change remote directory to 'path'\n");
-        printf("lcd path                      Change local directory to 'path'\n");
-        printf("chgrp grp path                Change group of file 'path' to 'grp'\n");
-        printf("chmod mode path               Change permissions of file 'path' to 'mode'\n");
-        printf("chown own path                Change owner of file 'path' to 'own'\n");
-        printf("help                          Display this help text\n");
-        printf("get remote-path [local-path]  Download file\n");
-        printf("lls [ls-options [path]]       Display local directory listing\n");
-        printf("ln oldpath newpath            Symlink remote file\n");
-        printf("lmkdir path                   Create local directory\n");
-        printf("lpwd                          Print local working directory\n");
-        printf("ls [path]                     Display remote directory listing\n");
-        printf("lumask umask                  Set local umask to 'umask'\n");
-        printf("mkdir path                    Create remote directory\n");
-        printf("progress                      Toggle display of progress meter\n");
-        printf("put local-path [remote-path]  Upload file\n");
-        printf("pwd                           Display remote working directory\n");
-        printf("exit                          Quit sftp\n");
-        printf("quit                          Quit sftp\n");
-        printf("rename oldpath newpath        Rename remote file\n");
-        printf("rmdir path                    Remove remote directory\n");
-        printf("rm path                       Delete remote file\n");
-        printf("symlink oldpath newpath       Symlink remote file\n");
-        printf("version                       Show SFTP version\n");
-        printf("!command                      Execute 'command' in local shell\n");
-        printf("!                             Escape to local shell\n");
-        printf("?                             Synonym for help\n");
-}
-
-static void
-local_do_shell(const char *args)
-{
-        int status;
-        char *shell;
-        pid_t pid;
-
-        if (!*args)
-                args = NULL;
-
-        if ((shell = getenv("SHELL")) == NULL)
-                shell = _PATH_BSHELL;
-
-        if ((pid = fork()) == -1)
-                fatal("Couldn't fork: %s", strerror(errno));
-
-        if (pid == 0) {
-                /* XXX: child has pipe fds to ssh subproc open - issue? */
-                if (args) {
-                        debug3("Executing %s -c \"%s\"", shell, args);
-                        execl(shell, shell, "-c", args, (char *)NULL);
-                } else {
-                        debug3("Executing %s", shell);
-                        execl(shell, shell, (char *)NULL);
-                }
-                fprintf(stderr, "Couldn't execute \"%s\": %s\n", shell,
-                    strerror(errno));
-                _exit(1);
-        }
-        while (waitpid(pid, &status, 0) == -1)
-                if (errno != EINTR)
-                        fatal("Couldn't wait for child: %s", strerror(errno));
-        if (!WIFEXITED(status))
-                error("Shell exited abormally");
-        else if (WEXITSTATUS(status))
-                error("Shell exited with status %d", WEXITSTATUS(status));
-}
-
-static void
-local_do_ls(const char *args)
-{
-        if (!args || !*args)
-                local_do_shell(_PATH_LS);
-        else {
-                int len = strlen(_PATH_LS " ") + strlen(args) + 1;
-                char *buf = xmalloc(len);
-
-                /* XXX: quoting - rip quoting code from ftp? */
-                snprintf(buf, len, _PATH_LS " %s", args);
-                local_do_shell(buf);
-                xfree(buf);
-        }
-}
-
-/* Strip one path (usually the pwd) from the start of another */
-static char *
-path_strip(char *path, char *strip)
-{
-        size_t len;
-
-        if (strip == NULL)
-                return (xstrdup(path));
-
-        len = strlen(strip);
-        if (strip != NULL && strncmp(path, strip, len) == 0) {
-                if (strip[len - 1] != '/' && path[len] == '/')
-                        len++;
-                return (xstrdup(path + len));
-        }
-
-        return (xstrdup(path));
-}
-
-static char *
-path_append(char *p1, char *p2)
-{
-        char *ret;
-        int len = strlen(p1) + strlen(p2) + 2;
-
-        ret = xmalloc(len);
-        strlcpy(ret, p1, len);
-        if (p1[strlen(p1) - 1] != '/')
-                strlcat(ret, "/", len);
-        strlcat(ret, p2, len);
-
-        return(ret);
-}
-
-static char *
-make_absolute(char *p, char *pwd)
-{
-        char *abs;
-
-        /* Derelativise */
-        if (p && p[0] != '/') {
-                abs = path_append(pwd, p);
-                xfree(p);
-                return(abs);
-        } else
-                return(p);
-}
-
-static int
-infer_path(const char *p, char **ifp)
-{
-        char *cp;
-
-        cp = strrchr(p, '/');
-        if (cp == NULL) {
-                *ifp = xstrdup(p);
-                return(0);
-        }
-
-        if (!cp[1]) {
-                error("Invalid path");
-                return(-1);
-        }
-
-        *ifp = xstrdup(cp + 1);
-        return(0);
-}
-
-static int
-parse_getput_flags(const char **cpp, int *pflag)
-{
-        const char *cp = *cpp;
-
-        /* Check for flags */
-        if (cp[0] == '-' && cp[1] && strchr(WHITESPACE, cp[2])) {
-                switch (cp[1]) {
-                case 'p':
-                case 'P':
-                        *pflag = 1;
-                        break;
-                default:
-                        error("Invalid flag -%c", cp[1]);
-                        return(-1);
-                }
-                cp += 2;
-                *cpp = cp + strspn(cp, WHITESPACE);
-        }
-
-        return(0);
-}
-
-static int
-parse_ls_flags(const char **cpp, int *lflag)
-{
-        const char *cp = *cpp;
-
-        /* Check for flags */
-        if (cp++[0] == '-') {
-                for(; strchr(WHITESPACE, *cp) == NULL; cp++) {
-                        switch (*cp) {
-                        case 'l':
-                                *lflag = LONG_VIEW;
-                                break;
-                        case '1':
-                                *lflag = SHORT_VIEW;
-                                break;
-                        default:
-                                error("Invalid flag -%c", *cp);
-                                return(-1);
-                        }
-                }
-                *cpp = cp + strspn(cp, WHITESPACE);
-        }
-
-        return(0);
-}
-
-static int
-get_pathname(const char **cpp, char **path)
-{
-        const char *cp = *cpp, *end;
-        char quot;
-        int i, j;
-
-        cp += strspn(cp, WHITESPACE);
-        if (!*cp) {
-                *cpp = cp;
-                *path = NULL;
-                return (0);
-        }
-
-        *path = xmalloc(strlen(cp) + 1);
-
-        /* Check for quoted filenames */
-        if (*cp == '\"' || *cp == '\'') {
-                quot = *cp++;
-
-                /* Search for terminating quote, unescape some chars */
-                for (i = j = 0; i <= strlen(cp); i++) {
-                        if (cp[i] == quot) {    /* Found quote */
-                                (*path)[j] = '\0';
-                                i++;
-                                break;
-                        }
-                        if (cp[i] == '\0') {    /* End of string */
-                                error("Unterminated quote");
-                                goto fail;
-                        }
-                        if (cp[i] == '\\') {    /* Escaped characters */
-                                i++;
-                                if (cp[i] != '\'' && cp[i] != '\"' && 
-                                    cp[i] != '\\') {
-                                        error("Bad escaped character '\%c'",
-                                            cp[i]);
-                                        goto fail;
-                                }
-                        }
-                        (*path)[j++] = cp[i];
-                }
-
-                if (j == 0) {
-                        error("Empty quotes");
-                        goto fail;
-                }
-                *cpp = cp + i + strspn(cp + i, WHITESPACE);
-        } else {
-                /* Read to end of filename */
-                end = strpbrk(cp, WHITESPACE);
-                if (end == NULL)
-                        end = strchr(cp, '\0');
-                *cpp = end + strspn(end, WHITESPACE);
-
-                memcpy(*path, cp, end - cp);
-                (*path)[end - cp] = '\0';
-        }
-        return (0);
-
- fail:
-        xfree(*path);
-        *path = NULL;   
-        return (-1);
-}
-
-static int
-is_dir(char *path)
-{
-        struct stat sb;
-
-        /* XXX: report errors? */
-        if (stat(path, &sb) == -1)
-                return(0);
-
-        return(sb.st_mode & S_IFDIR);
-}
-
-static int
-is_reg(char *path)
-{
-        struct stat sb;
-
-        if (stat(path, &sb) == -1)
-                fatal("stat %s: %s", path, strerror(errno));
-
-        return(S_ISREG(sb.st_mode));
-}
-
-static int
-remote_is_dir(struct sftp_conn *conn, char *path)
-{
-        Attrib *a;
-
-        /* XXX: report errors? */
-        if ((a = do_stat(conn, path, 1)) == NULL)
-                return(0);
-        if (!(a->flags & SSH2_FILEXFER_ATTR_PERMISSIONS))
-                return(0);
-        return(a->perm & S_IFDIR);
-}
-
-static int
-process_get(struct sftp_conn *conn, char *src, char *dst, char *pwd, int pflag)
-{
-        char *abs_src = NULL;
-        char *abs_dst = NULL;
-        char *tmp;
-        glob_t g;
-        int err = 0;
-        int i;
-
-        abs_src = xstrdup(src);
-        abs_src = make_absolute(abs_src, pwd);
-
-        memset(&g, 0, sizeof(g));
-        debug3("Looking up %s", abs_src);
-        if (remote_glob(conn, abs_src, 0, NULL, &g)) {
-                error("File \"%s\" not found.", abs_src);
-                err = -1;
-                goto out;
-        }
-
-        /* If multiple matches, dst must be a directory or unspecified */
-        if (g.gl_matchc > 1 && dst && !is_dir(dst)) {
-                error("Multiple files match, but \"%s\" is not a directory",
-                    dst);
-                err = -1;
-                goto out;
-        }
-
-        for (i = 0; g.gl_pathv[i]; i++) {
-                if (infer_path(g.gl_pathv[i], &tmp)) {
-                        err = -1;
-                        goto out;
-                }
-
-                if (g.gl_matchc == 1 && dst) {
-                        /* If directory specified, append filename */
-                        if (is_dir(dst)) {
-                                if (infer_path(g.gl_pathv[0], &tmp)) {
-                                        err = 1;
-                                        goto out;
-                                }
-                                abs_dst = path_append(dst, tmp);
-                                xfree(tmp);
-                        } else
-                                abs_dst = xstrdup(dst);
-                } else if (dst) {
-                        abs_dst = path_append(dst, tmp);
-                        xfree(tmp);
-                } else
-                        abs_dst = tmp;
-
-                printf("Fetching %s to %s\n", g.gl_pathv[i], abs_dst);
-                if (do_download(conn, g.gl_pathv[i], abs_dst, pflag) == -1)
-                        err = -1;
-                xfree(abs_dst);
-                abs_dst = NULL;
-        }
-
-out:
-        xfree(abs_src);
-        if (abs_dst)
-                xfree(abs_dst);
-        globfree(&g);
-        return(err);
-}
-
-static int
-process_put(struct sftp_conn *conn, char *src, char *dst, char *pwd, int pflag)
-{
-        char *tmp_dst = NULL;
-        char *abs_dst = NULL;
-        char *tmp;
-        glob_t g;
-        int err = 0;
-        int i;
-
-        if (dst) {
-                tmp_dst = xstrdup(dst);
-                tmp_dst = make_absolute(tmp_dst, pwd);
-        }
-
-        memset(&g, 0, sizeof(g));
-        debug3("Looking up %s", src);
-        if (glob(src, 0, NULL, &g)) {
-                error("File \"%s\" not found.", src);
-                err = -1;
-                goto out;
-        }
-
-        /* If multiple matches, dst may be directory or unspecified */
-        if (g.gl_matchc > 1 && tmp_dst && !remote_is_dir(conn, tmp_dst)) {
-                error("Multiple files match, but \"%s\" is not a directory",
-                    tmp_dst);
-                err = -1;
-                goto out;
-        }
-
-        for (i = 0; g.gl_pathv[i]; i++) {
-                if (!is_reg(g.gl_pathv[i])) {
-                        error("skipping non-regular file %s", 
-                            g.gl_pathv[i]);
-                        continue;
-                }
-                if (infer_path(g.gl_pathv[i], &tmp)) {
-                        err = -1;
-                        goto out;
-                }
-
-                if (g.gl_matchc == 1 && tmp_dst) {
-                        /* If directory specified, append filename */
-                        if (remote_is_dir(conn, tmp_dst)) {
-                                if (infer_path(g.gl_pathv[0], &tmp)) {
-                                        err = 1;
-                                        goto out;
-                                }
-                                abs_dst = path_append(tmp_dst, tmp);
-                                xfree(tmp);
-                        } else
-                                abs_dst = xstrdup(tmp_dst);
-
-                } else if (tmp_dst) {
-                        abs_dst = path_append(tmp_dst, tmp);
-                        xfree(tmp);
-                } else
-                        abs_dst = make_absolute(tmp, pwd);
-
-                printf("Uploading %s to %s\n", g.gl_pathv[i], abs_dst);
-                if (do_upload(conn, g.gl_pathv[i], abs_dst, pflag) == -1)
-                        err = -1;
-        }
-
-out:
-        if (abs_dst)
-                xfree(abs_dst);
-        if (tmp_dst)
-                xfree(tmp_dst);
-        globfree(&g);
-        return(err);
-}
-
-static int
-sdirent_comp(const void *aa, const void *bb)
-{
-        SFTP_DIRENT *a = *(SFTP_DIRENT **)aa;
-        SFTP_DIRENT *b = *(SFTP_DIRENT **)bb;
-
-        return (strcmp(a->filename, b->filename));
-}
-
-/* sftp ls.1 replacement for directories */
-static int
-do_ls_dir(struct sftp_conn *conn, char *path, char *strip_path, int lflag)
-{
-        int n, c = 1, colspace = 0, columns = 1;
-        SFTP_DIRENT **d;
-
-        if ((n = do_readdir(conn, path, &d)) != 0)
-                return (n);
-
-        if (!(lflag & SHORT_VIEW)) {
-                int m = 0, width = 80;
-                struct winsize ws;
-
-                /* Count entries for sort and find longest filename */
-                for (n = 0; d[n] != NULL; n++)
-                        m = MAX(m, strlen(d[n]->filename));
-
-                if (ioctl(fileno(stdin), TIOCGWINSZ, &ws) != -1) 
-                        width = ws.ws_col;
-
-                columns = width / (m + 2);
-                columns = MAX(columns, 1);
-                colspace = width / columns;
-        }
-
-        qsort(d, n, sizeof(*d), sdirent_comp);
-
-        for (n = 0; d[n] != NULL; n++) {
-                char *tmp, *fname;
-
-                tmp = path_append(path, d[n]->filename);
-                fname = path_strip(tmp, strip_path);
-                xfree(tmp);
-
-                if (lflag & LONG_VIEW) {
-                        char *lname;
-                        struct stat sb;
-
-                        memset(&sb, 0, sizeof(sb));
-                        attrib_to_stat(&d[n]->a, &sb);
-                        lname = ls_file(fname, &sb, 1);
-                        printf("%s\n", lname);
-                        xfree(lname);
-                } else {
-                        printf("%-*s", colspace, fname);
-                        if (c >= columns) {
-                                printf("\n");
-                                c = 1;
-                        } else
-                                c++;
-                }
-
-                xfree(fname);
-        }
-
-        if (!(lflag & LONG_VIEW) && (c != 1))
-                printf("\n");
-
-        free_sftp_dirents(d);
-        return (0);
-}
-
-/* sftp ls.1 replacement which handles path globs */
-static int
-do_globbed_ls(struct sftp_conn *conn, char *path, char *strip_path,
-    int lflag)
-{
-        glob_t g;
-        int i, c = 1, colspace = 0, columns = 1;
-        Attrib *a;
-
-        memset(&g, 0, sizeof(g));
-
-        if (remote_glob(conn, path, GLOB_MARK|GLOB_NOCHECK|GLOB_BRACE,
-            NULL, &g)) {
-                error("Can't ls: \"%s\" not found", path);
-                return (-1);
-        }
-
-        /*
-         * If the glob returns a single match, which is the same as the
-         * input glob, and it is a directory, then just list its contents
-         */
-        if (g.gl_pathc == 1 &&
-            strncmp(path, g.gl_pathv[0], strlen(g.gl_pathv[0]) - 1) == 0) {
-                if ((a = do_lstat(conn, path, 1)) == NULL) {
-                        globfree(&g);
-                        return (-1);
-                }
-                if ((a->flags & SSH2_FILEXFER_ATTR_PERMISSIONS) &&
-                    S_ISDIR(a->perm)) {
-                        globfree(&g);
-                        return (do_ls_dir(conn, path, strip_path, lflag));
-                }
-        }
-
-        if (!(lflag & SHORT_VIEW)) {
-                int m = 0, width = 80;
-                struct winsize ws;      
-
-                /* Count entries for sort and find longest filename */
-                for (i = 0; g.gl_pathv[i]; i++)
-                        m = MAX(m, strlen(g.gl_pathv[i]));
-
-                if (ioctl(fileno(stdin), TIOCGWINSZ, &ws) != -1)
-                        width = ws.ws_col;
-
-                columns = width / (m + 2);
-                columns = MAX(columns, 1);
-                colspace = width / columns;
-        }
-
-        for (i = 0; g.gl_pathv[i]; i++) {
-                char *fname;
-
-                fname = path_strip(g.gl_pathv[i], strip_path);
-
-                if (lflag & LONG_VIEW) {
-                        char *lname;
-                        struct stat sb;
-
-                        /*
-                         * XXX: this is slow - 1 roundtrip per path
-                         * A solution to this is to fork glob() and
-                         * build a sftp specific version which keeps the
-                         * attribs (which currently get thrown away)
-                         * that the server returns as well as the filenames.
-                         */
-                        memset(&sb, 0, sizeof(sb));
-                        a = do_lstat(conn, g.gl_pathv[i], 1);
-                        if (a != NULL)
-                                attrib_to_stat(a, &sb);
-                        lname = ls_file(fname, &sb, 1);
-                        printf("%s\n", lname);
-                        xfree(lname);
-                } else {
-                        printf("%-*s", colspace, fname);
-                        if (c >= columns) {
-                                printf("\n");
-                                c = 1;
-                        } else
-                                c++;
-                }
-                xfree(fname);
-        }
-
-        if (!(lflag & LONG_VIEW) && (c != 1))
-                printf("\n");
-
-        if (g.gl_pathc)
-                globfree(&g);
-
-        return (0);
-}
-
-static int
-parse_args(const char **cpp, int *pflag, int *lflag, int *iflag,
-    unsigned long *n_arg, char **path1, char **path2)
-{
-        const char *cmd, *cp = *cpp;
-        char *cp2;
-        int base = 0;
-        long l;
-        int i, cmdnum;
-
-        /* Skip leading whitespace */
-        cp = cp + strspn(cp, WHITESPACE);
-
-        /* Ignore blank lines and lines which begin with comment '#' char */
-        if (*cp == '\0' || *cp == '#')
-                return (0);
-
-        /* Check for leading '-' (disable error processing) */
-        *iflag = 0;
-        if (*cp == '-') {
-                *iflag = 1;
-                cp++;
-        }
-                
-        /* Figure out which command we have */
-        for (i = 0; cmds[i].c; i++) {
-                int cmdlen = strlen(cmds[i].c);
-
-                /* Check for command followed by whitespace */
-                if (!strncasecmp(cp, cmds[i].c, cmdlen) &&
-                    strchr(WHITESPACE, cp[cmdlen])) {
-                        cp += cmdlen;
-                        cp = cp + strspn(cp, WHITESPACE);
-                        break;
-                }
-        }
-        cmdnum = cmds[i].n;
-        cmd = cmds[i].c;
-
-        /* Special case */
-        if (*cp == '!') {
-                cp++;
-                cmdnum = I_SHELL;
-        } else if (cmdnum == -1) {
-                error("Invalid command.");
-                return (-1);
-        }
-
-        /* Get arguments and parse flags */
-        *lflag = *pflag = *n_arg = 0;
-        *path1 = *path2 = NULL;
-        switch (cmdnum) {
-        case I_GET:
-        case I_PUT:
-                if (parse_getput_flags(&cp, pflag))
-                        return(-1);
-                /* Get first pathname (mandatory) */
-                if (get_pathname(&cp, path1))
-                        return(-1);
-                if (*path1 == NULL) {
-                        error("You must specify at least one path after a "
-                            "%s command.", cmd);
-                        return(-1);
-                }
-                /* Try to get second pathname (optional) */
-                if (get_pathname(&cp, path2))
-                        return(-1);
-                break;
-        case I_RENAME:
-        case I_SYMLINK:
-                if (get_pathname(&cp, path1))
-                        return(-1);
-                if (get_pathname(&cp, path2))
-                        return(-1);
-                if (!*path1 || !*path2) {
-                        error("You must specify two paths after a %s "
-                            "command.", cmd);
-                        return(-1);
-                }
-                break;
-        case I_RM:
-        case I_MKDIR:
-        case I_RMDIR:
-        case I_CHDIR:
-        case I_LCHDIR:
-        case I_LMKDIR:
-                /* Get pathname (mandatory) */
-                if (get_pathname(&cp, path1))
-                        return(-1);
-                if (*path1 == NULL) {
-                        error("You must specify a path after a %s command.",
-                            cmd);
-                        return(-1);
-                }
-                break;
-        case I_LS:
-                if (parse_ls_flags(&cp, lflag))
-                        return(-1);
-                /* Path is optional */
-                if (get_pathname(&cp, path1))
-                        return(-1);
-                break;
-        case I_LLS:
-        case I_SHELL:
-                /* Uses the rest of the line */
-                break;
-        case I_LUMASK:
-                base = 8;
-        case I_CHMOD:
-                base = 8;
-        case I_CHOWN:
-        case I_CHGRP:
-                /* Get numeric arg (mandatory) */
-                l = strtol(cp, &cp2, base);
-                if (cp2 == cp || ((l == LONG_MIN || l == LONG_MAX) &&
-                    errno == ERANGE) || l < 0) {
-                        error("You must supply a numeric argument "
-                            "to the %s command.", cmd);
-                        return(-1);
-                }
-                cp = cp2;
-                *n_arg = l;
-                if (cmdnum == I_LUMASK && strchr(WHITESPACE, *cp))
-                        break;
-                if (cmdnum == I_LUMASK || !strchr(WHITESPACE, *cp)) {
-                        error("You must supply a numeric argument "
-                            "to the %s command.", cmd);
-                        return(-1);
-                }
-                cp += strspn(cp, WHITESPACE);
-
-                /* Get pathname (mandatory) */
-                if (get_pathname(&cp, path1))
-                        return(-1);
-                if (*path1 == NULL) {
-                        error("You must specify a path after a %s command.",
-                            cmd);
-                        return(-1);
-                }
-                break;
-        case I_QUIT:
-        case I_PWD:
-        case I_LPWD:
-        case I_HELP:
-        case I_VERSION:
-        case I_PROGRESS:
-                break;
-        default:
-                fatal("Command not implemented");
-        }
-
-        *cpp = cp;
-        return(cmdnum);
-}
-
-static int
-parse_dispatch_command(struct sftp_conn *conn, const char *cmd, char **pwd,
-    int err_abort)
-{
-        char *path1, *path2, *tmp;
-        int pflag, lflag, iflag, cmdnum, i;
-        unsigned long n_arg;
-        Attrib a, *aa;
-        char path_buf[MAXPATHLEN];
-        int err = 0;
-        glob_t g;
-
-        path1 = path2 = NULL;
-        cmdnum = parse_args(&cmd, &pflag, &lflag, &iflag, &n_arg,
-            &path1, &path2);
-
-        if (iflag != 0)
-                err_abort = 0;
-
-        memset(&g, 0, sizeof(g));
-
-        /* Perform command */
-        switch (cmdnum) {
-        case 0:
-                /* Blank line */
-                break;
-        case -1:
-                /* Unrecognized command */
-                err = -1;
-                break;
-        case I_GET:
-                err = process_get(conn, path1, path2, *pwd, pflag);
-                break;
-        case I_PUT:
-                err = process_put(conn, path1, path2, *pwd, pflag);
-                break;
-        case I_RENAME:
-                path1 = make_absolute(path1, *pwd);
-                path2 = make_absolute(path2, *pwd);
-                err = do_rename(conn, path1, path2);
-                break;
-        case I_SYMLINK:
-                path2 = make_absolute(path2, *pwd);
-                err = do_symlink(conn, path1, path2);
-                break;
-        case I_RM:
-                path1 = make_absolute(path1, *pwd);
-                remote_glob(conn, path1, GLOB_NOCHECK, NULL, &g);
-                for (i = 0; g.gl_pathv[i]; i++) {
-                        printf("Removing %s\n", g.gl_pathv[i]);
-                        err = do_rm(conn, g.gl_pathv[i]);
-                        if (err != 0 && err_abort)
-                                break;
-                }
-                break;
-        case I_MKDIR:
-                path1 = make_absolute(path1, *pwd);
-                attrib_clear(&a);
-                a.flags |= SSH2_FILEXFER_ATTR_PERMISSIONS;
-                a.perm = 0777;
-                err = do_mkdir(conn, path1, &a);
-                break;
-        case I_RMDIR:
-                path1 = make_absolute(path1, *pwd);
-                err = do_rmdir(conn, path1);
-                break;
-        case I_CHDIR:
-                path1 = make_absolute(path1, *pwd);
-                if ((tmp = do_realpath(conn, path1)) == NULL) {
-                        err = 1;
-                        break;
-                }
-                if ((aa = do_stat(conn, tmp, 0)) == NULL) {
-                        xfree(tmp);
-                        err = 1;
-                        break;
-                }
-                if (!(aa->flags & SSH2_FILEXFER_ATTR_PERMISSIONS)) {
-                        error("Can't change directory: Can't check target");
-                        xfree(tmp);
-                        err = 1;
-                        break;
-                }
-                if (!S_ISDIR(aa->perm)) {
-                        error("Can't change directory: \"%s\" is not "
-                            "a directory", tmp);
-                        xfree(tmp);
-                        err = 1;
-                        break;
-                }
-                xfree(*pwd);
-                *pwd = tmp;
-                break;
-        case I_LS:
-                if (!path1) {
-                        do_globbed_ls(conn, *pwd, *pwd, lflag);
-                        break;
-                }
-
-                /* Strip pwd off beginning of non-absolute paths */
-                tmp = NULL;
-                if (*path1 != '/')
-                        tmp = *pwd;
-
-                path1 = make_absolute(path1, *pwd);
-                err = do_globbed_ls(conn, path1, tmp, lflag);
-                break;
-        case I_LCHDIR:
-                if (chdir(path1) == -1) {
-                        error("Couldn't change local directory to "
-                            "\"%s\": %s", path1, strerror(errno));
-                        err = 1;
-                }
-                break;
-        case I_LMKDIR:
-                if (mkdir(path1, 0777) == -1) {
-                        error("Couldn't create local directory "
-                            "\"%s\": %s", path1, strerror(errno));
-                        err = 1;
-                }
-                break;
-        case I_LLS:
-                local_do_ls(cmd);
-                break;
-        case I_SHELL:
-                local_do_shell(cmd);
-                break;
-        case I_LUMASK:
-                umask(n_arg);
-                printf("Local umask: %03lo\n", n_arg);
-                break;
-        case I_CHMOD:
-                path1 = make_absolute(path1, *pwd);
-                attrib_clear(&a);
-                a.flags |= SSH2_FILEXFER_ATTR_PERMISSIONS;
-                a.perm = n_arg;
-                remote_glob(conn, path1, GLOB_NOCHECK, NULL, &g);
-                for (i = 0; g.gl_pathv[i]; i++) {
-                        printf("Changing mode on %s\n", g.gl_pathv[i]);
-                        err = do_setstat(conn, g.gl_pathv[i], &a);
-                        if (err != 0 && err_abort)
-                                break;
-                }
-                break;
-        case I_CHOWN:
-        case I_CHGRP:
-                path1 = make_absolute(path1, *pwd);
-                remote_glob(conn, path1, GLOB_NOCHECK, NULL, &g);
-                for (i = 0; g.gl_pathv[i]; i++) {
-                        if (!(aa = do_stat(conn, g.gl_pathv[i], 0))) {
-                                if (err != 0 && err_abort)
-                                        break;
-                                else
-                                        continue;
-                        }
-                        if (!(aa->flags & SSH2_FILEXFER_ATTR_UIDGID)) {
-                                error("Can't get current ownership of "
-                                    "remote file \"%s\"", g.gl_pathv[i]);
-                                if (err != 0 && err_abort)
-                                        break;
-                                else
-                                        continue;
-                        }
-                        aa->flags &= SSH2_FILEXFER_ATTR_UIDGID;
-                        if (cmdnum == I_CHOWN) {
-                                printf("Changing owner on %s\n", g.gl_pathv[i]);
-                                aa->uid = n_arg;
-                        } else {
-                                printf("Changing group on %s\n", g.gl_pathv[i]);
-                                aa->gid = n_arg;
-                        }
-                        err = do_setstat(conn, g.gl_pathv[i], aa);
-                        if (err != 0 && err_abort)
-                                break;
-                }
-                break;
-        case I_PWD:
-                printf("Remote working directory: %s\n", *pwd);
-                break;
-        case I_LPWD:
-                if (!getcwd(path_buf, sizeof(path_buf))) {
-                        error("Couldn't get local cwd: %s", strerror(errno));
-                        err = -1;
-                        break;
-                }
-                printf("Local working directory: %s\n", path_buf);
-                break;
-        case I_QUIT:
-                /* Processed below */
-                break;
-        case I_HELP:
-                help();
-                break;
-        case I_VERSION:
-                printf("SFTP protocol version %u\n", sftp_proto_version(conn));
-                break;
-        case I_PROGRESS:
-                showprogress = !showprogress;
-                if (showprogress)
-                        printf("Progress meter enabled\n");
-                else
-                        printf("Progress meter disabled\n");
-                break;
-        default:
-                fatal("%d is not implemented", cmdnum);
-        }
-
-        if (g.gl_pathc)
-                globfree(&g);
-        if (path1)
-                xfree(path1);
-        if (path2)
-                xfree(path2);
-
-        /* If an unignored error occurs in batch mode we should abort. */
-        if (err_abort && err != 0)
-                return (-1);
-        else if (cmdnum == I_QUIT)
-                return (1);
-
-        return (0);
-}
-
-int
-interactive_loop(int fd_in, int fd_out, char *file1, char *file2)
-{
-        char *pwd;
-        char *dir = NULL;
-        char cmd[2048];
-        struct sftp_conn *conn;
-        int err;
-
-        conn = do_init(fd_in, fd_out, copy_buffer_len, num_requests);
-        if (conn == NULL)
-                fatal("Couldn't initialise connection to server");
-
-        pwd = do_realpath(conn, ".");
-        if (pwd == NULL)
-                fatal("Need cwd");
-
-        if (file1 != NULL) {
-                dir = xstrdup(file1);
-                dir = make_absolute(dir, pwd);
-
-                if (remote_is_dir(conn, dir) && file2 == NULL) {
-                        printf("Changing to: %s\n", dir);
-                        snprintf(cmd, sizeof cmd, "cd \"%s\"", dir);
-                        if (parse_dispatch_command(conn, cmd, &pwd, 1) != 0)
-                                return (-1);
-                } else {
-                        if (file2 == NULL)
-                                snprintf(cmd, sizeof cmd, "get %s", dir);
-                        else
-                                snprintf(cmd, sizeof cmd, "get %s %s", dir,
-                                    file2);
-
-                        err = parse_dispatch_command(conn, cmd, &pwd, 1);
-                        xfree(dir);
-                        xfree(pwd);
-                        return (err);
-                }
-                xfree(dir);
-        }
-
-#if HAVE_SETVBUF
-        setvbuf(stdout, NULL, _IOLBF, 0);
-        setvbuf(infile, NULL, _IOLBF, 0);
-#else
-        setlinebuf(stdout);
-        setlinebuf(infile);
-#endif
-
-        err = 0;
-        for (;;) {
-                char *cp;
-
-                printf("sftp> ");
-
-                /* XXX: use libedit */
-                if (fgets(cmd, sizeof(cmd), infile) == NULL) {
-                        printf("\n");
-                        break;
-                } else if (infile != stdin) /* Bluff typing */
-                        printf("%s", cmd);
-
-                cp = strrchr(cmd, '\n');
-                if (cp)
-                        *cp = '\0';
-
-                err = parse_dispatch_command(conn, cmd, &pwd, infile != stdin);
-                if (err != 0)
-                        break;
-        }
-        xfree(pwd);
-
-        /* err == 1 signifies normal "quit" exit */
-        return (err >= 0 ? 0 : -1);
-}
-
diff --git a/sftp-int.h b/sftp-int.h
deleted file mode 100644
index 8a04a03f6..000000000
--- a/sftp-int.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* $OpenBSD: sftp-int.h,v 1.6 2003/01/08 23:53:26 djm Exp $ */
-
-/*
- * Copyright (c) 2001,2002 Damien Miller.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-int      interactive_loop(int, int, char *, char *);
diff --git a/ssh-dss.h b/ssh-dss.h
deleted file mode 100644
index 94961b1e8..000000000
--- a/ssh-dss.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*      $OpenBSD: ssh-dss.h,v 1.6 2002/02/24 19:14:59 markus Exp $      */
-
-/*
- * Copyright (c) 2000 Markus Friedl.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#ifndef DSA_H
-#define DSA_H
-
-int      ssh_dss_sign(Key *, u_char **, u_int *, u_char *, u_int);
-int      ssh_dss_verify(Key *, u_char *, u_int, u_char *, u_int);
-
-#endif
diff --git a/ssh-keyscan.c b/ssh-keyscan.c
index 3cb52ac2e..2f9221605 100644
--- a/ssh-keyscan.c
+++ b/ssh-keyscan.c
@@ -339,7 +339,7 @@ keygrab_ssh2(con *c)
 {
         int j;
 
-        packet_set_connection(c->c_fd, c->c_fd);
+        packet_set_connection(c->c_fd, c->c_fd, timeout);
         enable_compat20();
         myproposal[PROPOSAL_SERVER_HOST_KEY_ALGS] = c->c_keytype == KT_DSA?
             "ssh-dss": "ssh-rsa";
diff --git a/ssh-rsa.h b/ssh-rsa.h
deleted file mode 100644
index 7177a3f92..000000000
--- a/ssh-rsa.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*      $OpenBSD: ssh-rsa.h,v 1.6 2002/02/24 19:14:59 markus Exp $      */
-
-/*
- * Copyright (c) 2000 Markus Friedl.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#ifndef SSH_RSA_H
-#define SSH_RSA_H
-
-int      ssh_rsa_sign(Key *, u_char **, u_int *, u_char *, u_int);
-int      ssh_rsa_verify(Key *, u_char *, u_int, u_char *, u_int);
-
-#endif
diff --git a/ssh.1 b/ssh.1
index 0ff77ea29..d08fb0e01 100644
--- a/ssh.1
+++ b/ssh.1
@@ -721,6 +721,10 @@ per-host basis in the configuration file.
 .It Fl q
 Quiet mode.
 Causes all warning and diagnostic messages to be suppressed.
+Only fatal errors are displayed.
+If a second
+.Fl q
+is given then even fatal errors are suppressed.
 .It Fl R Xo
 .Sm off
 .Ar port : host : hostport
@@ -1106,6 +1110,7 @@ if an error occurred.
 .Xr sftp 1 ,
 .Xr ssh-add 1 ,
 .Xr ssh-agent 1 ,
+.Xr ssh-argv0 1 ,
 .Xr ssh-keygen 1 ,
 .Xr telnet 1 ,
 .Xr hosts.equiv 5 ,
diff --git a/ssh.c b/ssh.c
index 1419f9874..0a2f8f711 100644
--- a/ssh.c
+++ b/ssh.c
@@ -324,7 +324,12 @@ again:
                                 exit(0);
                         break;
                 case 'q':
-                        options.log_level = SYSLOG_LEVEL_QUIET;
+                        if (options.log_level == SYSLOG_LEVEL_QUIET) {
+                                options.log_level = SYSLOG_LEVEL_SILENT;
+                        }
+                        else if (options.log_level != SYSLOG_LEVEL_SILENT) {
+                                options.log_level = SYSLOG_LEVEL_QUIET;
+                        }
                         break;
                 case 'e':
                         if (optarg[0] == '^' && optarg[2] == 0 &&
diff --git a/ssh_config b/ssh_config
index 2692e8913..f72394b4e 100644
--- a/ssh_config
+++ b/ssh_config
@@ -18,6 +18,7 @@
 # Host *
 #   ForwardAgent no
 #   ForwardX11 no
+#   ForwardX11Trusted yes
 #   RhostsRSAAuthentication no
 #   RSAAuthentication yes
 #   PasswordAuthentication yes
diff --git a/ssh_config.5 b/ssh_config.5
index 0e1a031e5..a8767b493 100644
--- a/ssh_config.5
+++ b/ssh_config.5
@@ -127,8 +127,15 @@ Valid arguments are
 If set to
 .Dq yes ,
 passphrase/password querying will be disabled.
+In addition, the 
+.Cm ServerAliveInterval 
+and
+.Cm SetupTimeOut
+options will both be set to 300 seconds by default.
 This option is useful in scripts and other batch jobs where no user
-is present to supply the password.
+is present to supply the password,
+and where it is desirable to detect a
+broken network swiftly.
 The argument must be
 .Dq yes
 or
@@ -366,7 +373,8 @@ from stealing or tampering with data belonging to trusted X11
 clients.
 .Pp
 The default is
-.Dq no .
+.Dq yes
+(Debian-specific).
 .Pp
 See the X11 SECURITY extension specification for full details on
 the restrictions imposed on untrusted clients.
@@ -641,8 +649,12 @@ from the server,
 will send a message through the encrypted
 channel to request a response from the server.
 The default
-is 0, indicating that these messages will not be sent to the server.
-This option applies to protocol version 2 only.
+is 0, indicating that these messages will not be sent to the server,
+or 300 if the
+.Cm BatchMode
+option is set.
+.Cm ProtocolKeepAlives
+is a Debian-specific compatibility alias for this option.
 .It Cm ServerAliveCountMax
 Sets the number of server alive messages (see above) which may be
 sent without
@@ -670,6 +682,26 @@ If, for example,
 .Cm ServerAliveCountMax
 is left at the default, if the server becomes unresponsive ssh
 will disconnect after approximately 45 seconds.
+This option works when using protocol version 2 only; in protocol version
+1 there is no mechanism to request a response from the server to the
+server alive messages, so disconnection is the responsibility of the TCP
+stack.
+.It Cm SetupTimeOut
+Normally,
+.Nm ssh
+blocks indefinitely whilst waiting to receive the ssh banner and other
+setup protocol from the server, during the session setup.
+This can cause
+.Nm ssh
+to hang under certain circumstances.
+If this option is set,
+.Nm ssh
+will give up if no data from the server is received for the specified
+number of seconds.
+The argument must be an integer.
+The default is 0 (disabled), or 300 if
+.Cm BatchMode
+is set.
 .It Cm SmartcardDevice
 Specifies which smartcard device to use.
 The argument to this keyword is the device
@@ -717,6 +749,12 @@ Specifies whether the system should send TCP keepalive messages to the
 other side.
 If they are sent, death of the connection or crash of one
 of the machines will be properly noticed.
+This option only uses TCP keepalives (as opposed to using ssh level
+keepalives), so takes a long time to notice when the connection dies.
+As such, you probably want
+the
+.Cm ServerAliveInterval
+option as well.
 However, this means that
 connections will die if the route is down temporarily, and some people
 find it annoying.
diff --git a/sshconnect.c b/sshconnect.c
index 11008e544..5158416f0 100644
--- a/sshconnect.c
+++ b/sshconnect.c
@@ -50,6 +50,13 @@ extern pid_t proxy_command_pid;
 #define INET6_ADDRSTRLEN 46
 #endif
 
+static sig_atomic_t banner_timedout;
+
+static void banner_alarm_catch (int signum)
+{
+        banner_timedout = 1;
+}
+
 static int show_other_keys(const char *, Key *);
 static void warn_changed_key(Key *);
 
@@ -157,7 +164,7 @@ ssh_proxy_connect(const char *host, u_short port, const char *proxy_command)
         buffer_free(&command);
 
         /* Set the connection file descriptors. */
-        packet_set_connection(pout[0], pin[1]);
+        packet_set_connection(pout[0], pin[1], options.setuptimeout);
 
         /* Indicate OK return */
         return 0;
@@ -422,7 +429,7 @@ ssh_connect(const char *host, struct sockaddr_storage * hostaddr,
                 error("setsockopt SO_KEEPALIVE: %.100s", strerror(errno));
 
         /* Set the connection. */
-        packet_set_connection(sock, sock);
+        packet_set_connection(sock, sock, options.setuptimeout);
 
         return 0;
 }
@@ -439,24 +446,41 @@ ssh_exchange_identification(void)
         int connection_in = packet_get_connection_in();
         int connection_out = packet_get_connection_out();
         int minor1 = PROTOCOL_MINOR_1;
+        struct sigaction sa, osa;
 
-        /* Read other side\'s version identification. */
+        /* Read other side's version identification.
+         * If SetupTimeOut has been set, give up after
+         * the specified amount of time
+         */
+        if(options.setuptimeout > 0){
+                memset(&sa, 0, sizeof(sa));
+                sa.sa_handler = banner_alarm_catch;
+                /*throw away any pending alarms, since we'd block otherwise*/
+                alarm(0);
+                sigaction(SIGALRM, &sa, &osa);
+                alarm(options.setuptimeout);
+        }
         for (;;) {
-                for (i = 0; i < sizeof(buf) - 1; i++) {
-                        int len = atomicio(read, connection_in, &buf[i], 1);
-                        if (len < 0)
+                for (i = 0; i < sizeof(buf) - 1; ) {
+                        int len = read(connection_in, &buf[i], 1);
+                        if (banner_timedout)
+                                fatal("ssh_exchange_identification: Timeout waiting for version information.");
+                        if (len < 0) {
+                                if (errno == EINTR)
+                                        continue;
                                 fatal("ssh_exchange_identification: read: %.100s", strerror(errno));
+                        }
                         if (len != 1)
                                 fatal("ssh_exchange_identification: Connection closed by remote host");
-                        if (buf[i] == '\r') {
-                                buf[i] = '\n';
-                                buf[i + 1] = 0;
-                                continue;               /**XXX wait for \n */
-                        }
                         if (buf[i] == '\n') {
                                 buf[i + 1] = 0;
                                 break;
                         }
+                        if (buf[i] == '\r') {
+                                buf[i] = '\n';
+                                buf[i + 1] = 0;         /**XXX wait for \n */
+                        }
+                        i++;
                 }
                 buf[sizeof(buf) - 1] = 0;
                 if (strncmp(buf, "SSH-", 4) == 0)
@@ -465,6 +489,14 @@ ssh_exchange_identification(void)
         }
         server_version_string = xstrdup(buf);
 
+        /* If SetupTimeOut has been set, unset the alarm now, and
+         * put the correct handler for SIGALRM back.
+         */
+        if (options.setuptimeout > 0) {
+                alarm(0);
+                sigaction(SIGALRM,&osa,NULL);
+        }
+
         /*
          * Check that the versions match.  In future this might accept
          * several versions and set appropriate flags to handle them.
diff --git a/sshd.8 b/sshd.8
index 233b00037..c5949dc1a 100644
--- a/sshd.8
+++ b/sshd.8
@@ -296,9 +296,12 @@ Ports specified in the configuration file are ignored when a
 command-line port is specified.
 .It Fl q
 Quiet mode.
-Nothing is sent to the system log.
+Only fatal errors are sent to the system log.
 Normally the beginning,
 authentication, and termination of each connection is logged.
+If a second 
+.Fl q
+is given then nothing is sent to the system log.
 .It Fl t
 Test mode.
 Only check the validity of the configuration file and sanity of the keys.
@@ -613,7 +616,7 @@ really used for anything; they are provided for the convenience of
 the user so their contents can be copied to known hosts files.
 These files are created using
 .Xr ssh-keygen 1 .
-.It Pa /etc/moduli
+.It Pa /etc/ssh/moduli
 Contains Diffie-Hellman groups used for the "Diffie-Hellman Group Exchange".
 The file format is described in
 .Xr moduli 5 .
diff --git a/sshd.c b/sshd.c
index 60f63ef7b..19071c1bc 100644
--- a/sshd.c
+++ b/sshd.c
@@ -956,7 +956,12 @@ main(int ac, char **av)
                         /* ignored */
                         break;
                 case 'q':
-                        options.log_level = SYSLOG_LEVEL_QUIET;
+                        if (options.log_level == SYSLOG_LEVEL_QUIET) { 
+                                options.log_level = SYSLOG_LEVEL_SILENT; 
+                        } 
+                        else if (options.log_level != SYSLOG_LEVEL_SILENT) { 
+                                options.log_level = SYSLOG_LEVEL_QUIET; 
+                        } 
                         break;
                 case 'b':
                         options.server_key_bits = atoi(optarg);
@@ -1303,7 +1308,7 @@ main(int ac, char **av)
 
                         /* Bind the socket to the desired port. */
                         if (bind(listen_sock, ai->ai_addr, ai->ai_addrlen) < 0) {
-                                if (!ai->ai_next)
+                                if (!num_listen_socks && !ai->ai_next)
                                     error("Bind to port %s on %s failed: %.200s.",
                                             strport, ntop, strerror(errno));
                                 close(listen_sock);
@@ -1627,7 +1632,7 @@ main(int ac, char **av)
          * Register our connection.  This turns encryption off because we do
          * not have a key.
          */
-        packet_set_connection(sock_in, sock_out);
+        packet_set_connection(sock_in, sock_out, -1);
 
         remote_port = get_remote_port();
         remote_ip = get_remote_ipaddr();
diff --git a/sshtty.h b/sshtty.h
deleted file mode 100644
index 723b27846..000000000
--- a/sshtty.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* $OpenBSD: sshtty.h,v 1.3 2003/09/19 17:43:35 markus Exp $ */
-/*
- * Author: Tatu Ylonen <ylo@cs.hut.fi>
- * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
- *                    All rights reserved
- *
- * As far as I am concerned, the code I have written for this software
- * can be used freely for any purpose.  Any derived versions of this
- * software must be clearly marked as such, and if the derived work is
- * incompatible with the protocol description in the RFC file, it must be
- * called by a name other than "ssh" or "Secure Shell".
- */
-/*
- * Copyright (c) 2001 Markus Friedl.  All rights reserved.
- * Copyright (c) 2001 Kevin Steves.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef SSHTTY_H
-#define SSHTTY_H
-
-#include <termios.h>
-
-struct termios get_saved_tio(void);
-void     leave_raw_mode(void);
-void     enter_raw_mode(void);
-
-#endif
diff --git a/stamp-h.in b/stamp-h.in
deleted file mode 100644
index e69de29bb..000000000
--- a/stamp-h.in
+++ /dev/null
diff --git a/tildexpand.h b/tildexpand.h
deleted file mode 100644
index f5e7e40bc..000000000
--- a/tildexpand.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*      $OpenBSD: tildexpand.h,v 1.4 2001/06/26 17:27:25 markus Exp $   */
-
-/*
- * Author: Tatu Ylonen <ylo@cs.hut.fi>
- * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
- *                    All rights reserved
- *
- * As far as I am concerned, the code I have written for this software
- * can be used freely for any purpose.  Any derived versions of this
- * software must be clearly marked as such, and if the derived work is
- * incompatible with the protocol description in the RFC file, it must be
- * called by a name other than "ssh" or "Secure Shell".
- */
-
-char    *tilde_expand_filename(const char *, uid_t);
diff --git a/version.h b/version.h
index aae2c3b37..fb68aba60 100644
--- a/version.h
+++ b/version.h
@@ -1,3 +1,5 @@
 /* $OpenBSD: version.h,v 1.42 2004/08/16 08:17:01 markus Exp $ */
 
+#ifndef SSH_VERSION
 #define SSH_VERSION     "OpenSSH_3.9p1"
+#endif /* SSH_VERSION */