64 files changed, 10761 insertions, 0 deletions

diff --git a/debian/.cvsignore b/debian/.cvsignore
new file mode 100644
index 000000000..9ec0ecde2
--- /dev/null
+++ b/debian/.cvsignore
@@ -0,0 +1,11 @@
+files
+tmp
+openssh-client
+openssh-server
+ssh
+openssh-client-udeb
+openssh-server-udeb
+ssh-askpass-gnome
+*.debhelper
+*substvars
+*.templates
diff --git a/debian/NEWS b/debian/NEWS
new file mode 100644
index 000000000..f2359de35
--- /dev/null
+++ b/debian/NEWS
@@ -0,0 +1,32 @@
+openssh (1:3.8.1p1-9) experimental; urgency=low
+
+  The ssh package has been split into openssh-client and openssh-server. If
+  you had previously requested that the sshd server should not be run, then
+  that request will still be honoured. However, the recommended approach is
+  now to remove the openssh-server package if you do not want to run sshd.
+  You can remove the old /etc/ssh/sshd_not_to_be_run marker file after doing
+  that.
+
+ -- Colin Watson <cjwatson@debian.org>  Mon,  2 Aug 2004 20:48:54 +0100
+
+openssh (1:3.5p1-1) unstable; urgency=low
+
+  This version of OpenSSH disables the environment option for public keys by
+  default, in order to avoid certain attacks (for example, LD_PRELOAD). If
+  you are using this option in an authorized_keys file, beware that the keys
+  in question will no longer work until the option is removed.
+
+  To re-enable this option, set "PermitUserEnvironment yes" in
+  /etc/ssh/sshd_config after the upgrade is complete, taking note of the
+  warning in the sshd_config(5) manual page.
+
+ -- Colin Watson <cjwatson@debian.org>  Sat, 26 Oct 2002 19:41:51 +0100
+
+openssh (1:3.0.1p1-1) unstable; urgency=high
+
+  As of version 3, OpenSSH no longer uses separate files for ssh1 and ssh2
+  keys. This means the authorized_keys2 and known_hosts2 files are no longer
+  needed. They will still be read in order to maintain backward
+  compatibility.
+
+ -- Matthew Vernon <matthew@debian.org>  Thu, 28 Nov 2001 17:43:01 +0000
diff --git a/debian/README.Debian b/debian/README.Debian
new file mode 100644
index 000000000..6b7ce8691
--- /dev/null
+++ b/debian/README.Debian
@@ -0,0 +1,261 @@
+OpenSSH for Debian
+------------------
+
+Although this package is widely referred to as OpenSSH, it is actually
+a branch of an early version of ssh which has been tidied up by the
+OpenBSD folks.
+
+It has been decided that this version should have the privilege of
+carrying the ``ssh'' name in Debian, since it is the only version of
+ssh that is going to make it into Debian proper, being the only one 
+that complies with the Debian Free Software Guidelines.
+
+If you were expecting to get the non-free version of ssh (1.2.27 or
+whatever) when you installed this package, then you're out of luck, as
+Debian don't ship it.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+BUILD ISSUES
+============
+
+To build the openssh package for woody, set DEB_BUILD_SSH_WOODY=1 in
+your environment. This is necessary due to non-backward-compatible
+changes in PAM support.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+UPGRADE ISSUES
+==============
+
+Privilege Separation
+--------------------
+
+As of 3.3, openssh has employed privilege separation to reduce the
+quantity of code that runs as root, thereby reducing the impact of
+some security holes in sshd. This now also works properly with PAM.
+
+Privilege separation is turned on by default, so, if you decide you
+want it turned off, you need to add "UsePrivilegeSeparation no" to
+/etc/ssh/sshd_config.
+
+PermitRootLogin set to yes
+--------------------------
+
+This is now the default setting (in line with upstream), and people
+who asked for an automatically-generated configuration file when
+upgrading from potato (or on a new install) will have this setting in
+their /etc/ssh/sshd_config file. 
+
+Should you wish to change this setting, edit /etc/ssh/sshd_config, and
+change:
+PermitRootLogin yes
+to:
+PermitRootLogin no
+
+Having PermitRootLogin set to yes means that an attacker that knows
+the root password can ssh in directly (without having to go via a user
+account). If you set it to no, then they must compromise a normal user
+account. In the vast majority of cases, this does not give added
+security; remember that any account you su to root from is equivalent
+to root - compromising this account gives an attacker access to root
+easily. If you only ever log in as root from the physical console,
+then you probably want to set this value to no.
+
+As an aside, PermitRootLogin can also be set to "without-password" or
+"forced-commands-only" - see sshd(8) for more details.
+
+DO NOT FILE BUG REPORTS SAYING YOU THINK THIS DEFAULT IS INCORRECT!
+
+The argument above is somewhat condensed; I have had this discussion
+at great length with many people. If you think the default is
+incorrect, and feel strongly enough to want to argue with me about it,
+then send me email to matthew@debian.org. I will close bug reports
+claiming the default is incorrect.
+
+SSH now uses protocol 2 by default
+----------------------------------
+
+This means all your keyfiles you used for protocol version 1 need to
+be re-generated. The server keys are done automatically, but for RSA
+authentication, please read the ssh-keygen manpage.
+
+If you have an automatically generated configuration file, and decide
+at a later stage that you do want to support protocol version 1 (not
+recommended, but note that the ssh client shipped with Debian potato
+only supported protocol version 1), then you need to do the following:
+
+Change /etc/ssh/sshd_config such that:
+Protocol 2
+becomes:
+Protocol 2,1
+Also add the line:
+HostKey /etc/ssh/ssh_host_key
+
+If you do not already have an RSA1 host key in /etc/ssh/ssh_host_key,
+you will need to generate one. To do so, run this command as root:
+
+  ssh-keygen -f /etc/ssh/ssh_host_key -N '' -t rsa1
+
+As of openssh-server 1:4.1p1-2, the option to support protocol version 1
+is no longer available via debconf. You must edit the configuration file
+instead.
+
+X11 Forwarding
+--------------
+
+ssh's default for ForwardX11 has been changed to ``no'' because it has
+been pointed out that logging into remote systems administered by
+untrusted people is likely to open you up to X11 attacks, so you
+should have to actively decide that you trust the remote machine's
+root, before enabling X11.  I strongly recommend that you do this on a
+machine-by-machine basis, rather than just enabling it in the default
+host settings.
+
+In order for X11 forwarding to work, you need to install xauth on the
+server. In Debian this is in the xbase-clients package.
+
+As of OpenSSH 3.1, the remote $DISPLAY uses localhost by default to reduce
+the security risks of X11 forwarding. Look up X11UseLocalhost in
+sshd_config(8) if this is a problem.
+
+OpenSSH 3.8 invented ForwardX11Trusted, which when set to no causes the
+ssh client to create an untrusted X cookie so that attacks on the
+forwarded X11 connection can't become attacks on X clients on the remote
+machine. However, this has some problems in implementation - notably a
+very short timeout of the untrusted cookie - breaks large numbers of
+existing setups, and generally seems immature. The Debian package
+therefore sets the default for this option to "yes" (in ssh itself,
+rather than in ssh_config).
+
+Fallback to RSH
+---------------
+
+The default for this setting has been changed from Yes to No, for
+security reasons, and to stop the delay attempting to rsh to machines
+that don't offer the service.  Simply switch it back on in either
+/etc/ssh/ssh_config or ~/.ssh/config for those machines that you need
+it for.
+
+Setgid ssh-agent and environment variables
+------------------------------------------
+
+As of version 1:3.5p1-1, ssh-agent is installed setgid to prevent ptrace()
+attacks retrieving private key material. This has the side-effect of causing
+glibc to remove certain environment variables which might have security
+implications for set-id programs, including LD_PRELOAD, LD_LIBRARY_PATH, and
+TMPDIR.
+
+If you need to set any of these environment variables, you will need to do
+so in the program exec()ed by ssh-agent. This may involve creating a small
+wrapper script.
+
+Symlink Hostname invocation
+---------------------------
+
+This version of ssh no longer includes support for invoking ssh with the
+hostname as the name of the file run.  People wanting this support should
+use the ssh-argv0 script.
+
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+
+OTHER ISSUES
+============
+
+/usr/bin/ssh not SUID
+---------------------
+
+Due to Debian bug #164325, RhostsRSAAuthentication can only be used if ssh
+is SUID.  Until this is fixed, if that is a problem, use:
+
+   dpkg-statoverride 
+
+or if that's also missing, use this:
+
+   chown root.root /usr/bin/ssh
+   chmod 04755 /usr/bin/ssh
+
+Authorization Forwarding
+------------------------
+
+Similarly, root on a remote server could make use of your ssh-agent
+(while you're logged into their machine) to obtain access to machines
+which trust your keys.  This feature is therefore disabled by default.
+You should only re-enable it for those hosts (in your ~/.ssh/config or
+/etc/ssh/ssh_config) where you are confident that the remote machine
+is not a threat.
+
+Problems logging in with RSA authentication
+-------------------------------------------
+
+If you have trouble logging in with RSA authentication then the
+problem is probably caused by the fact that you have your home
+directory writable by group, as well as user (this is the default on
+Debian systems).
+
+Depending upon other settings on your system (i.e. other users being
+in your group) this could open a security hole, so you will need to
+make your home directory writable only by yourself.  Run this command,
+as yourself:
+
+  chmod g-w ~/
+
+to remove group write permissions.  If you use ssh-copy-id to install your
+keys, it does this for you.
+
+-L option of ssh nonfree
+------------------------
+
+non-free ssh supported the usage of the option -L to use a non privileged
+port for scp. This option will not be supported by scp from openssh. 
+
+Please use instead scp -o "UsePrivilegedPort=no" as documented in the 
+manpage to scp itself. 
+
+Problem logging in because of TCP-Wrappers
+------------------------------------------
+
+ssh is compiled with support for tcp-wrappers. So if you can no longer
+log into your system, please check that /etc/hosts.allow and /etc/hosts.deny
+are configured so that ssh is not blocked. 
+
+Kerberos support
+----------------
+
+ssh is now compiled with Kerberos support. Unfortunately, privilege
+separation is incompatible with Kerberos support for SSH protocol 1 and
+parts of the support for protocol 2; you may need to run kinit after logging
+in.
+
+Interoperability between scp and the ssh.com SSH server
+-------------------------------------------------------
+
+In version 2 and greater of the commercial SSH server produced by SSH
+Communications Security, scp was changed to use SFTP (SSH2's file transfer
+protocol) instead of the traditional rcp-over-ssh, thereby breaking
+compatibility. The OpenSSH developers regard this as a bug in the ssh.com
+server, and do not currently intend to change OpenSSH's scp to match.
+
+Workarounds for this problem are to install scp1 on the server (scp2 will
+fall back to it), to use sftp, or to use some other transfer mechanism such
+as rsync-over-ssh or tar-over-ssh.
+
+Running sshd from inittab
+-------------------------
+
+Some people find it useful to run the sshd server from inittab, to make sure
+that it always stays running. To do this, stop sshd ('/etc/init.d/ssh
+stop'), add the following line to /etc/inittab, and run 'telinit q':
+
+  ss:2345:respawn:/usr/sbin/sshd -D
+
+If you do this, note that you will need to stop sshd being started in the
+normal way ('rm -f /etc/rc[2345].d/S20ssh') and that you will need to
+restart this sshd manually on upgrades.
+
+--
+Matthew Vernon
+<matthew@debian.org>
+and
+Colin Watson
+<cjwatson@debian.org>
diff --git a/debian/changelog b/debian/changelog
new file mode 100644
index 000000000..98e6ed73a
--- /dev/null
+++ b/debian/changelog
@@ -0,0 +1,1931 @@
+openssh (1:4.3p2-1) UNRELEASED; urgency=low
+
+  * New upstream release (closes: #361032).
+    - CVE-2006-0225: scp (as does rcp, on which it is based) invoked a
+      subshell to perform local to local, and remote to remote copy
+      operations. This subshell exposed filenames to shell expansion twice;
+      allowing a local attacker to create filenames containing shell
+      metacharacters that, if matched by a wildcard, could lead to execution
+      of attacker-specified commands with the privilege of the user running
+      scp (closes: #349645).
+    - Add support for tunneling arbitrary network packets over a connection
+      between an OpenSSH client and server via tun(4) virtual network
+      interfaces. This allows the use of OpenSSH (4.3+) to create a true VPN
+      between the client and server providing real network connectivity at
+      layer 2 or 3. This feature is experimental.
+    - Reduce default key length for new DSA keys generated by ssh-keygen
+      back to 1024 bits. DSA is not specified for longer lengths and does
+      not fully benefit from simply making keys longer. As per FIPS 186-2
+      Change Notice 1, ssh-keygen will refuse to generate a new DSA key
+      smaller or larger than 1024 bits.
+    - Fixed X forwarding failing to start when the X11 client is executed in
+      background at the time of session exit.
+    - Change ssh-keygen to generate a protocol 2 RSA key when invoked
+      without arguments (closes: #114894).
+    - Fix timing variance for valid vs. invalid accounts when attempting
+      Kerberos authentication.
+    - Ensure that ssh always returns code 255 on internal error
+      (closes: #259865).
+    - Cleanup wtmp files on SIGTERM when not using privsep.
+    - Set SO_REUSEADDR on X11 listeners to avoid problems caused by
+      lingering sockets from previous session (X11 applications can
+      sometimes not connect to 127.0.0.1:60xx) (closes:
+      https://launchpad.net/bugs/25528).
+    - Ensure that fds 0, 1 and 2 are always attached in all programs, by
+      duping /dev/null to them if necessary.
+    - Xauth list invocation had bogus "." argument.
+    - Remove internal assumptions on key exchange hash algorithm and output
+      length, preparing OpenSSH for KEX methods with alternate hashes.
+    - Ignore junk sent by a server before it sends the "SSH-" banner.
+    - Many manual page improvements.
+    - Lots of cleanups, including fixes to memory leaks on error paths and
+      possible crashes.
+  * Rename KeepAlive to TCPKeepAlive in default sshd_config
+    (closes: #349896).
+  * debconf template translations:
+    - Update Italian (thanks, Luca Monducci; closes: #360348).
+    - Add Galician (thanks, Jacobo Tarrio; closes: #361220).
+
+ -- Colin Watson <cjwatson@debian.org>  Sat,  1 Apr 2006 17:24:28 +0100
+
+openssh (1:4.2p1-8) unstable; urgency=low
+
+  [ Frans Pop ]
+  * Use udeb support introduced in debhelper 4.2.0 (available in sarge)
+    rather than constructing udebs by steam.
+  * Require debhelper 5.0.22, which generates correct shared library
+    dependencies for udebs (closes: #360068). This build-dependency can be
+    ignored if building on sarge.
+
+  [ Colin Watson ]
+  * Switch to debhelper compatibility level 4, since we now require
+    debhelper 4 even on sarge anyway for udeb support.
+
+ -- Colin Watson <cjwatson@debian.org>  Fri, 31 Mar 2006 09:44:55 +0100
+
+openssh (1:4.2p1-7) unstable; urgency=low
+
+  * I accidentally applied the default $PATH change in 1:4.2p1-6 to the udeb
+    rather than the deb. Fixed.
+
+ -- Colin Watson <cjwatson@debian.org>  Wed,  1 Mar 2006 16:19:00 +0000
+
+openssh (1:4.2p1-6) unstable; urgency=low
+
+  * Sync default values of $PATH from shadow 1:4.0.12-6, adding /usr/bin/X11
+    to the normal and superuser paths and /usr/games to the normal path.
+  * When the client receives a signal, don't fatal() with "Killed by signal
+    %d." (which produces unhelpful noise on stderr and causes confusion for
+    users of some applications that wrap ssh); instead, generate a debug
+    message and exit with the traditional status (closes: #313371).
+  * debconf template translations:
+    - Add Swedish (thanks, Daniel Nylander; closes: #333133).
+    - Update Spanish (thanks, Javier Fernández-Sanguino Peña;
+      closes: #341371).
+    - Correct erroneously-changed Last-Translator headers in Greek and
+      Spanish translations.
+
+ -- Colin Watson <cjwatson@debian.org>  Mon, 20 Feb 2006 16:50:55 +0000
+
+openssh (1:4.2p1-5) unstable; urgency=low
+
+  * Add a CVE name to the 1:4.0p1-1 changelog entry.
+  * Build-depend on libselinux1-dev on armeb.
+  * Only send GSSAPI proposal if GSSAPIAuthentication is enabled.
+  * Build-depend on libssl-dev (>= 0.9.8-1) to cope with surprise OpenSSL
+    transition, since otherwise who knows what the buildds will do. If
+    you're building openssh yourself, you can safely ignore this and use an
+    older libssl-dev.
+
+ -- Colin Watson <cjwatson@debian.org>  Fri,  7 Oct 2005 12:23:42 +0100
+
+openssh (1:4.2p1-4) unstable; urgency=low
+
+  * Initialise token to GSS_C_EMPTY_BUFFER in ssh_gssapi_check_mechanism
+    (closes: #328606).
+
+ -- Colin Watson <cjwatson@debian.org>  Fri, 16 Sep 2005 12:50:16 +0100
+
+openssh (1:4.2p1-3) unstable; urgency=low
+
+  * Add prototype for ssh_gssapi_server_mechanisms (closes: #328372).
+  * Interoperate with ssh-krb5 << 3.8.1p1-1 servers, which used a slightly
+    different version of the gssapi authentication method (thanks, Aaron M.
+    Ucko; closes: #328388).
+  * Explicitly tell po2debconf to use the 'popular' output encoding, so that
+    the woody-compatibility hack works even with po-debconf 0.9.0.
+
+ -- Colin Watson <cjwatson@debian.org>  Thu, 15 Sep 2005 09:28:21 +0100
+
+openssh (1:4.2p1-2) unstable; urgency=low
+
+  * Annotate 1:4.2p1-1 changelog with CVE references.
+  * Add remaining pieces of Kerberos support (closes: #152657, #275472):
+    - Add GSSAPI key exchange support from
+      http://www.sxw.org.uk/computing/patches/openssh.html (thanks, Stephen
+      Frost).
+    - Build-depend on libkrb5-dev and configure --with-kerberos5=/usr.
+    - openssh-client and openssh-server replace ssh-krb5.
+    - Update commented-out Kerberos/GSSAPI options in default sshd_config.
+    - Fix HAVE_GSSAPI_KRB5_H/HAVE_GSSAPI_GSSAPI_KRB5_H typos in
+      gss-serv-krb5.c.
+
+ -- Colin Watson <cjwatson@debian.org>  Wed, 14 Sep 2005 18:28:49 +0100
+
+openssh (1:4.2p1-1) unstable; urgency=low
+
+  * New upstream release.
+    - SECURITY (CAN-2005-2797): Fix a bug introduced in OpenSSH 4.0 that
+      caused GatewayPorts to be incorrectly activated for dynamic ("-D")
+      port forwardings when no listen address was explicitly specified
+      (closes: #326065).
+    - SECURITY (CAN-2005-2798): Fix improper delegation of GSSAPI
+      credentials. This code is only built in openssh-krb5, not openssh, but
+      I mention the CVE reference here anyway for completeness.
+    - Add a new compression method ("Compression delayed") that delays zlib
+      compression until after authentication, eliminating the risk of zlib
+      vulnerabilities being exploited by unauthenticated users. Note that
+      users of OpenSSH versions earlier than 3.5 will need to disable
+      compression on the client or set "Compression yes" (losing this
+      security benefit) on the server.
+    - Increase the default size of new RSA/DSA keys generated by ssh-keygen
+      from 1024 to 2048 bits (closes: #181162).
+    - Many bugfixes and improvements to connection multiplexing.
+    - Don't pretend to accept $HOME (closes: #208648).
+  * debian/rules: Resynchronise CFLAGS with that generated by configure.
+  * openssh-client and openssh-server conflict with pre-split ssh to avoid
+    problems when ssh is left un-upgraded (closes: #324695).
+  * Set X11Forwarding to yes in the default sshd_config (new installs only).
+    At least when X11UseLocalhost is turned on, which is the default, the
+    security risks of using X11 forwarding are risks to the client, not to
+    the server (closes: #320104).
+
+ -- Colin Watson <cjwatson@debian.org>  Wed, 14 Sep 2005 15:16:14 +0100
+
+openssh (1:4.1p1-7) unstable; urgency=low
+
+  * Do the IDEA host key check on a temporary file to avoid altering
+    /etc/ssh/ssh_host_key itself (closes: #312312).
+  * Work around the ssh-askpass alternative somehow ending up in manual mode
+    pointing to the obsolete /usr/lib/ssh/gnome-ssh-askpass.
+  * Add GNU/kFreeBSD support (thanks, Aurelien Jarno; closes: #318113).
+  * Fix XSIish uses of 'test' in openssh-server.preinst.
+  * Policy version 3.6.2: no changes required.
+
+ -- Colin Watson <cjwatson@debian.org>  Fri,  2 Sep 2005 16:18:11 +0100
+
+openssh (1:4.1p1-6) unstable; urgency=low
+
+  * Fix one-character typo that meant the binaries in openssh-client and
+    openssh-server got recompiled with the wrong options during
+    'debian/rules install' (closes: #317088, #317238, #317241).
+
+ -- Colin Watson <cjwatson@debian.org>  Thu,  7 Jul 2005 10:56:16 +0100
+
+openssh (1:4.1p1-5) unstable; urgency=low
+
+  * Build-depend on libselinux1-dev on ppc64 too (closes: #314625).
+  * Drop priority of ssh to extra to match the override file.
+  * Make /usr/share/doc/openssh-server and /usr/share/doc/ssh symlinks to
+    /usr/share/doc/openssh-client (closes: #314745).
+  * Ship README.dns (closes: #284874).
+  * Disable btmp logging, since Debian's /var/log/btmp has inappropriate
+    permissions (closes: #314956).
+  * Allow ~/.ssh/config to be group-writable, provided that the group in
+    question contains only the file's owner (closes: #314347).
+  * debconf template translations:
+    - Update Brazilian Portuguese (thanks, André Luís Lopes;
+      closes: #315477).
+    - Add Vietnamese (thanks, Clytie Siddall; closes: #316636).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun,  3 Jul 2005 17:08:08 +0100
+
+openssh (1:4.1p1-4) unstable; urgency=low
+
+  * openssh-client and openssh-server conflict with ssh-krb5, as ssh-krb5
+    only conflicts with ssh (closes: #312475).
+  * SELinux support (thanks, Manoj Srivastava; closes: #308555):
+    - Added SELinux capability, and turned it on be default. Added
+      restorecon calls in preinst and postinst (should not matter if the
+      machine is not SELinux aware). By and large, the changes made should
+      have no effect unless the rules file calls --with-selinux; and even
+      then there should be no performance hit for machines not actively
+      running SELinux.
+    - Modified the preinst and postinst to call restorecon to set the
+      security context for the generated public key files.
+    - Added a comment to /etc/pam.d/ssh to indicate that an SELinux system
+      may want to also include pam_selinux.so.
+  * Re-enable ssh-askpass-gnome on the Hurd, now that its build-dependencies
+    are available.
+  * Restore /usr/lib/sftp-server temporarily, as a symlink to
+    /usr/lib/openssh/sftp-server (closes: #312891).
+  * Switch to debhelper compatibility level 3, since 2 is deprecated.
+  * debconf template translations:
+    - Update German (thanks, Jens Seidel; closes: #313949).
+
+ -- Colin Watson <cjwatson@debian.org>  Fri, 17 Jun 2005 14:20:20 +0100
+
+openssh (1:4.1p1-3) unstable; urgency=low
+
+  * Upload to unstable.
+
+ -- Colin Watson <cjwatson@debian.org>  Mon,  6 Jun 2005 22:28:33 +0100
+
+openssh (1:4.1p1-2) experimental; urgency=low
+
+  * Drop debconf support for allowing SSH protocol 1, which is discouraged
+    and has not been the default since openssh 1:3.0.1p1-1. Users who need
+    this should edit sshd_config instead (closes: #147212).
+  * Since ssh-keysign isn't used by default (you need to set
+    EnableSSHKeysign to "yes" in /etc/ssh/ssh_config), having a debconf
+    question to ask whether it should be setuid is overkill, and the
+    question text had got out of date anyway. Remove this question, ship
+    ssh-keysign setuid in openssh-client.deb, and set a statoverride if the
+    debconf question was previously set to false.
+  * Add lintian overrides for the above (setuid-binary,
+    no-debconf-templates).
+  * Fix picky lintian errors about slogin symlinks.
+  * Fix DEB_HOST_ARCH_OS/DEB_HOST_GNU_SYSTEM compatibility handling.
+  * Apply Linux 2.2 workaround (see #239999) only on Linux.
+
+ -- Colin Watson <cjwatson@debian.org>  Thu,  2 Jun 2005 00:55:58 +0100
+
+openssh (1:4.1p1-1) experimental; urgency=low
+
+  * New upstream release.
+    - Normalise socket addresses returned by get_remote_hostname(), fixing
+      4-in-6 mapping issues with AllowUsers et al (closes: #192234).
+  * Take upstream's hint and disable the unsupported USE_POSIX_THREADS
+    (closes: #295757, #308868, and possibly others; may open other bugs).
+    Use PAM password authentication to avoid #278394. In future I may
+    provide two sets of binaries built with and without this option, since
+    it seems I can't win.
+  * Disable ChallengeResponseAuthentication in new installations, returning
+    to PasswordAuthentication by default, since it now supports PAM and
+    apparently works better with a non-threaded sshd (closes: #247521).
+  * openssh-server Suggests: rssh (closes: #233012).
+  * Change libexecdir to /usr/lib/openssh, and fix up various alternatives
+    and configuration files to match (closes: #87900, #151321).
+  * Fix up very old sshd_config files that refer to /usr/libexec/sftp-server
+    (closes: #141979).
+
+ -- Colin Watson <cjwatson@debian.org>  Tue, 31 May 2005 01:33:33 +0100
+
+openssh (1:4.0p1-1) experimental; urgency=low
+
+  * New upstream release.
+    - Port-forwarding specifications now take optional bind addresses, and
+      the server allows client-specified bind addresses for remote port
+      forwardings when configured with "GatewayPorts clientspecified"
+      (closes: #87253, #192206).
+    - ssh and ssh-keyscan now support hashing of known_hosts files for
+      improved privacy (CAN-2005-2666). ssh-keygen has new options for
+      managing known_hosts files, which understand hashing.
+    - sftp supports command history and editing support using libedit
+      (closes: #287013).
+    - Have scp and sftp wait for the spawned ssh to exit before they exit
+      themselves, allowing ssh to restore terminal modes (closes: #257130).
+    - Improved the handling of bad data in authorized_keys files,
+      eliminating fatal errors on corrupt or very large keys; e.g. linefeeds
+      in keys only produce errors in auth.log now (closes: #220726).
+    - Add "command mode" to ssh connection multiplexing (closes: #303452).
+    - Mention $HOME/.hushlogin in sshd(8) FILES section (closes: #163933).
+  * Make gnome-ssh-askpass stay above other windows (thanks, Liyang HU;
+    closes: #296487).
+  * Remove obsolete and unnecessary ssh/forward_warning debconf note.
+  * Hurd build fixes (although sshd still doesn't work):
+    - Restore X forwarding fix from #102991, lost somewhere along the way.
+    - Link with -lcrypt.
+    - Link with -lpthread rather than -pthread.
+    - Don't build ssh-askpass-gnome on the Hurd, until GNOME is available to
+      satisfy build-dependencies.
+  * Drop workaround for #242462 on amd64; it's been fixed properly upstream.
+  * Enable HashKnownHosts by default. This only affects new entries; use
+    'ssh-keygen -H' to convert an entire known_hosts file to hashed format.
+  * Note in ssh_config(5) that the SetupTimeOut option is Debian-specific
+    (closes: #307069).
+  * debconf template translations:
+    - Update Czech (thanks, Miroslav Kure; closes: #298744).
+    - Update Finnish (thanks, Matti Pöllä; closes: #303787).
+    - Synchronise Spanish with sarge branch (thanks, Javier
+      Fernández-Sanguino Peña; closes: #298536).
+    - Add Ukrainian (thanks, Eugeniy Meshcheryakov; closes: #301852).
+
+ -- Colin Watson <cjwatson@debian.org>  Thu, 26 May 2005 11:23:18 +0100
+
+openssh (1:3.9p1-3) experimental; urgency=low
+
+  * Explain how to run sshd from inittab in README.Debian (closes: #147360).
+  * Add debian/watch file.
+
+ -- Colin Watson <cjwatson@debian.org>  Fri, 18 Feb 2005 00:20:16 +0000
+
+openssh (1:3.9p1-2) experimental; urgency=low
+
+  * Remove pam_nologin from /etc/pam.d/ssh, as sshd's built-in support
+    appears to be sufficient and more useful (closes: #162996).
+  * Depend on debconf | debconf-2.0.
+  * Drop LoginGraceTime back to the upstream default of two minutes on new
+    installs (closes: #289573).
+  * debconf template translations from Ubuntu bug #1232:
+    - Update Greek (thanks, Logiotatidis George).
+    - Update Spanish (thanks, Santiago Erquicia).
+
+ -- Colin Watson <cjwatson@debian.org>  Sat, 15 Jan 2005 12:37:54 +0000
+
+openssh (1:3.9p1-1) experimental; urgency=low
+
+  * New upstream release.
+    - PAM password authentication implemented again (closes: #238699,
+      #242119).
+    - Implemented the ability to pass selected environment variables between
+      the client and the server.
+    - Fix ssh-keyscan breakage when remote server doesn't speak SSH protocol
+      (closes: #228828).
+    - Fix res_query detection (closes: #242462).
+    - 'ssh -c' documentation improved (closes: #265627).
+  * Pass LANG and LC_* environment variables from the client by default, and
+    accept them to the server by default in new installs, although not on
+    upgrade (closes: #264024).
+  * Build ssh in binary-indep, not binary-arch (thanks, LaMont Jones).
+  * Expand on openssh-client package description (closes: #273831).
+
+ -- Colin Watson <cjwatson@debian.org>  Tue,  4 Jan 2005 14:18:31 +0000
+
+openssh (1:3.8.1p1-14) experimental; urgency=low
+
+  * We use DH_COMPAT=2, so build-depend on debhelper (>= 2).
+  * Fix timing information leak allowing discovery of invalid usernames in
+    PAM keyboard-interactive authentication (backported from a patch by
+    Darren Tucker; closes: #281595).
+  * Make sure that there's a delay in PAM keyboard-interactive
+    authentication when PermitRootLogin is not set to yes and the correct
+    root password is entered (closes: #248747).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 28 Nov 2004 18:09:37 +0000
+
+openssh (1:3.8.1p1-13) experimental; urgency=low
+
+  * Enable threading for PAM, on Sam Hartman's advice (closes: #278394).
+  * debconf template translations:
+    - Update Dutch (thanks, cobaco; closes: #278715).
+  * Correct README.Debian's ForwardX11Trusted description (closes: #280190).
+
+ -- Colin Watson <cjwatson@debian.org>  Fri, 12 Nov 2004 12:03:13 +0000
+
+openssh (1:3.8.1p1-12) experimental; urgency=low
+
+  * Preserve /etc/ssh/sshd_config ownership/permissions (closes: #276754).
+  * Shorten the version string from the form "OpenSSH_3.8.1p1 Debian
+    1:3.8.1p1-8.sarge.1" to "OpenSSH_3.8.1p1 Debian-8.sarge.1", as some SSH
+    implementations apparently have problems with the long version string.
+    This is of course a bug in those implementations, but since the extent
+    of the problem is unknown it's best to play safe (closes: #275731).
+  * debconf template translations:
+    - Add Finnish (thanks, Matti Pöllä; closes: #265339).
+    - Update Danish (thanks, Morten Brix Pedersen; closes: #275895).
+    - Update French (thanks, Denis Barbier; closes: #276703).
+    - Update Japanese (thanks, Kenshi Muto; closes: #277438).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 24 Oct 2004 19:21:17 +0100
+
+openssh (1:3.8.1p1-11) experimental; urgency=high
+
+  * Move sshd_config(5) to openssh-server, where it belongs.
+  * If PasswordAuthentication is disabled, then offer to disable
+    ChallengeResponseAuthentication too. The current PAM code will attempt
+    password-style authentication if ChallengeResponseAuthentication is
+    enabled (closes: #250369).
+  * This will ask a question of anyone who installed fresh with 1:3.8p1-2 or
+    later and then upgraded. Sorry about that ... for this reason, the
+    default answer is to leave ChallengeResponseAuthentication enabled.
+
+ -- Colin Watson <cjwatson@debian.org>  Wed,  6 Oct 2004 14:28:20 +0100
+
+openssh (1:3.8.1p1-10) experimental; urgency=low
+
+  * Don't install the ssh-askpass-gnome .desktop file by default; I've had
+    too many GNOME people tell me it's the wrong thing to be doing. I've
+    left it in /usr/share/doc/ssh-askpass-gnome/examples/ for now.
+
+ -- Colin Watson <cjwatson@debian.org>  Wed, 25 Aug 2004 18:18:14 +0100
+
+openssh (1:3.8.1p1-9) experimental; urgency=low
+
+  * Split the ssh binary package into openssh-client and openssh-server
+    (closes: #39741). openssh-server depends on openssh-client for some
+    common functionality; it didn't seem worth creating yet another package
+    for this. openssh-client is priority standard, openssh-server optional.
+  * New transitional ssh package, priority optional, depending on
+    openssh-client and openssh-server. May be removed once nothing depends
+    on it.
+  * When upgrading from ssh to openssh-{client,server}, it's very difficult
+    for the maintainer scripts to find out what version we're upgrading from
+    without dodgy dpkg hackery. I've therefore taken the opportunity to move
+    a couple of debconf notes into NEWS files, namely ssh/ssh2_keys_merged
+    and ssh/user_environment_tell.
+  * Add a heuristic to try to make sure the sshd_config upgrade to >= 3.7
+    happens even though we don't know what version we're upgrading from.
+  * Remove /etc/ssh/sshd_not_to_be_run on purge of openssh-server. For now
+    (until sarge+2) it's still honoured to avoid breaking existing
+    configurations, but the right approach is now to remove the
+    openssh-server package if you don't want to run the server. Add a NEWS
+    item to that effect.
+
+ -- Colin Watson <cjwatson@debian.org>  Mon,  2 Aug 2004 20:48:54 +0100
+
+openssh (1:3.8.1p1-8.sarge.4) unstable; urgency=high
+
+  * Fix timing information leak allowing discovery of invalid usernames in
+    PAM keyboard-interactive authentication (backported from a patch by
+    Darren Tucker; closes: #281595).
+  * Make sure that there's a delay in PAM keyboard-interactive
+    authentication when PermitRootLogin is not set to yes and the correct
+    root password is entered (closes: #248747).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 28 Nov 2004 12:37:16 +0000
+
+openssh (1:3.8.1p1-8.sarge.3) unstable; urgency=low
+
+  * Enable threading for PAM, on Sam Hartman's advice (closes: #278394).
+  * debconf template translations:
+    - Update Dutch (thanks, cobaco; closes: #278715).
+  * Correct README.Debian's ForwardX11Trusted description (closes: #280190).
+
+ -- Colin Watson <cjwatson@debian.org>  Fri, 12 Nov 2004 10:31:12 +0000
+
+openssh (1:3.8.1p1-8.sarge.2) unstable; urgency=low
+
+  * Preserve /etc/ssh/sshd_config ownership/permissions (closes: #276754).
+  * Shorten the version string from the form "OpenSSH_3.8.1p1 Debian
+    1:3.8.1p1-8.sarge.1" to "OpenSSH_3.8.1p1 Debian-8.sarge.1", as some SSH
+    implementations apparently have problems with the long version string.
+    This is of course a bug in those implementations, but since the extent
+    of the problem is unknown it's best to play safe (closes: #275731).
+  * debconf template translations:
+    - Add Finnish (thanks, Matti Pöllä; closes: #265339).
+    - Update Danish (thanks, Morten Brix Pedersen; closes: #275895).
+    - Update French (thanks, Denis Barbier; closes: #276703).
+    - Update Japanese (thanks, Kenshi Muto; closes: #277438).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 24 Oct 2004 17:57:14 +0100
+
+openssh (1:3.8.1p1-8.sarge.1) unstable; urgency=high
+
+  * If PasswordAuthentication is disabled, then offer to disable
+    ChallengeResponseAuthentication too. The current PAM code will attempt
+    password-style authentication if ChallengeResponseAuthentication is
+    enabled (closes: #250369).
+  * This will ask a question of anyone who installed fresh with 1:3.8p1-2 or
+    later and then upgraded. Sorry about that ... for this reason, the
+    default answer is to leave ChallengeResponseAuthentication enabled.
+
+ -- Colin Watson <cjwatson@debian.org>  Wed,  6 Oct 2004 14:21:55 +0100
+
+openssh (1:3.8.1p1-8) unstable; urgency=high
+
+  * Matthew Vernon:
+    - Add a GPL exception to the licensing terms of the Debian patch
+      (closes: #211644).
+
+ -- Colin Watson <cjwatson@debian.org>  Thu, 29 Jul 2004 13:28:47 +0100
+
+openssh (1:3.8.1p1-7) unstable; urgency=low
+
+  * Re-enable shadow password support in openssh-server-udeb, at Bastian
+    Blank's request (closes: #260800).
+
+ -- Colin Watson <cjwatson@debian.org>  Thu, 22 Jul 2004 10:56:06 +0100
+
+openssh (1:3.8.1p1-6) unstable; urgency=low
+
+  * Implement hack in
+    http://lists.debian.org/debian-boot/2004/07/msg01207.html to get
+    openssh-client-udeb to show up as a retrievable debian-installer
+    component.
+  * Generate host keys in postinst only if the relevant HostKey directives
+    are found in sshd_config (closes: #87946).
+
+ -- Colin Watson <cjwatson@debian.org>  Wed, 21 Jul 2004 15:14:46 +0100
+
+openssh (1:3.8.1p1-5) unstable; urgency=medium
+
+  * Update German debconf template translation (thanks, Helge Kreutzmann;
+    closes: #252226).
+  * Remove Suggests: dnsutils, as it was only needed for
+    make-ssh-known-hosts (#93265), which has been replaced by ssh-keyscan.
+  * Disable shadow password support in openssh-server-udeb.
+  * Fix non-portable shell constructs in maintainer scripts, Makefile, and
+    ssh-copy-id (thanks, David Weinehall; closes: #258517).
+  * Apply patch from Darren Tucker to make the PAM authentication SIGCHLD
+    handler kill the PAM thread if its waitpid() call returns 0, as well as
+    the previous check for -1 (closes: #252676).
+  * Add scp and sftp to openssh-client-udeb. It might not be very 'u' any
+    more; oh well.
+
+ -- Colin Watson <cjwatson@debian.org>  Sat, 10 Jul 2004 13:57:27 +0100
+
+openssh (1:3.8.1p1-4) unstable; urgency=medium
+
+  * Kill off PAM thread if privsep slave dies (closes: #248125).
+
+ -- Colin Watson <cjwatson@debian.org>  Fri, 28 May 2004 17:58:45 -0300
+
+openssh (1:3.8.1p1-3) unstable; urgency=low
+
+  * Add ssh-keygen to openssh-server-udeb.
+
+ -- Colin Watson <cjwatson@debian.org>  Thu, 20 May 2004 16:31:52 +0100
+
+openssh (1:3.8.1p1-2) unstable; urgency=low
+
+  * Add Catalan debconf template translation (thanks, Aleix Badia i Bosch;
+    closes: #248748).
+  * openssh-client-udeb and openssh-server-udeb depend on libnss-files-udeb
+    (not yet uploaded).
+  * Restore ssh-askpass-gnome binary, lost by mistake.
+  * Don't link against libnsl in udeb builds.
+
+ -- Colin Watson <cjwatson@debian.org>  Thu, 20 May 2004 11:15:58 +0100
+
+openssh (1:3.8.1p1-1) unstable; urgency=low
+
+  * New upstream release.
+    - Use a longer buffer for tty names in utmp (closes: #247538).
+  * Make sure there's a newline at the end of sshd_config before adding
+    'UsePAM yes' (closes: #244829).
+  * Generate a new .orig.tar.gz without RFC.nroff, and remove
+    /usr/share/doc/ssh/RFC.gz (closes: #211640). It isn't DFSG-free and only
+    documents the obsolete SSH1 protocol, not to mention that it was never a
+    real RFC but only an Internet-Draft. It's available from
+    http://www.free.lp.se/bamse/draft-ylonen-ssh-protocol-00.txt if you want
+    it for some reason.
+  * Add openssh-client-udeb and openssh-server-udeb binary packages for use
+    in debian-installer. They still need libnss_files to be supplied in udeb
+    form by glibc.
+  * Work around lack of res_query weak alias in libresolv on amd64 (see
+    #242462, awaiting real fix upstream).
+  * Fix grammar in sshd(8) (closes: #238753).
+  * Add .desktop file and icon for ssh-askpass-gnome (closes: #232333).
+  * Update Polish debconf template translation (thanks, Emil Nowak;
+    closes: #242808).
+  * Add Turkish debconf template translation (thanks, Recai OktaÅŸ;
+    closes: #246068).
+
+ -- Colin Watson <cjwatson@debian.org>  Tue, 11 May 2004 23:38:10 +0100
+
+openssh (1:3.8p1-3) unstable; urgency=low
+
+  * Remove deprecated ReverseMappingCheck option from newly generated
+    sshd_config files (closes: #239987).
+  * Build everything apart from contrib in a subdirectory, to allow for
+    multiple builds.
+  * Some older kernels are missing setresuid() and setresgid(), so don't try
+    to use them. setreuid() and setregid() will do well enough for our
+    purposes (closes: #239999).
+
+ -- Colin Watson <cjwatson@debian.org>  Mon,  5 Apr 2004 21:23:43 +0100
+
+openssh (1:3.8p1-2) unstable; urgency=medium
+
+  * Disable PasswordAuthentication for new installations (closes: #236810).
+  * Turn off the new ForwardX11Trusted by default, returning to the
+    semantics of 3.7 and earlier, since it seems immature and causes far too
+    many problems with existing setups. See README.Debian for details
+    (closes: #237021).
+
+ -- Colin Watson <cjwatson@debian.org>  Wed, 10 Mar 2004 10:33:07 +0000
+
+openssh (1:3.8p1-1) unstable; urgency=low
+
+  * New upstream release (closes: #232281):
+    - New PAM implementation based on that in FreeBSD. This runs PAM session
+      modules before dropping privileges (closes: #132681, #150968).
+    - Since PAM session modules are run as root, we can turn pam_limits back
+      on by default, and it no longer spits out "Operation not permitted" to
+      syslog (closes: #171673).
+    - Password expiry works again (closes: #153235).
+    - 'ssh -q' suppresses login banner (closes: #134589).
+    - sshd doesn't lie to PAM about invalid usernames (closes: #157078).
+    - ssh-add prints key comment on each prompt (closes: #181869).
+    - Punctuation formatting fixed in man pages (closes: #191131).
+    - EnableSSHKeysign documented in ssh_config(5) (closes: #224457).
+  * Add 'UsePAM yes' to /etc/ssh/sshd_config on upgrade from versions older
+    than this, to maintain the standard Debian sshd configuration.
+  * Comment out PAMAuthenticationViaKbdInt and RhostsAuthentication in
+    sshd_config on upgrade. Neither option is supported any more.
+  * Privilege separation and PAM are now properly supported together, so
+    remove both debconf questions related to them and simply set it
+    unconditionally in newly generated sshd_config files (closes: #228838).
+  * ServerAliveInterval implemented upstream, so ProtocolKeepAlives is now a
+    compatibility alias. The semantics differ slightly, though; see
+    ssh_config(5) for details.
+  * Implement SSH1 support for ServerAliveInterval using SSH_MSG_IGNORE. As
+    documented in ssh_config(5), it's not as good as the SSH2 version.
+  * Remove -fno-builtin-log, -DHAVE_MMAP_ANON_SHARED, and
+    -D__FILE_OFFSET_BITS=64 compiler options, which are no longer necessary.
+  * Update config.guess and config.sub from autotools-dev 20040105.1.
+  * Darren Tucker:
+    - Reset signal status when starting pam auth thread, prevent hanging
+      during PAM keyboard-interactive authentications.
+    - Fix a non-security-critical segfault in PAM authentication.
+  * Add debconf template translations:
+    - Greek (thanks, Konstantinos Margaritis; closes: #232843).
+    - Italian (thanks, Renato Gini; closes: #234777).
+
+ -- Colin Watson <cjwatson@debian.org>  Sat,  6 Mar 2004 18:43:44 +0000
+
+openssh (1:3.6.1p2-12) unstable; urgency=low
+
+  * Update Spanish debconf template translation (thanks, Javier
+    Fernández-Sanguino Peña; closes: #228242).
+  * Add debconf template translations:
+    - Czech (thanks, Miroslav Kure; closes: #230110).
+    - Simplified Chinese (thanks, Hiei Xu; closes: #230726).
+
+ -- Colin Watson <cjwatson@debian.org>  Wed, 11 Feb 2004 09:37:57 +0000
+
+openssh (1:3.6.1p2-11) unstable; urgency=low
+
+  * Comment out pam_limits in default configuration, for now at least
+    (closes: #198254).
+  * Use invoke-rc.d (if it exists) to run the init script.
+  * Backport format string bug fix in sshconnect.c (closes: #225238).
+  * ssh-copy-id exits if ssh fails (closes: #215252).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun,  4 Jan 2004 18:59:21 +0000
+
+openssh (1:3.6.1p2-10) unstable; urgency=low
+
+  * Use --retry in init script when restarting rather than sleeping, to make
+    sure the old process is dead (thanks, Herbert Xu; closes: #212117).
+    Depend on dpkg (>= 1.9.0) for start-stop-daemon's --retry option.
+  * Update debconf template translations:
+    - Brazilian Portuguese (thanks, Andre Luis Lopes; closes: #219844).
+    - Danish (thanks, Morten Brix Pedersen; closes: #217964).
+    - Japanese (thanks, Kenshi Muto; closes: #212497).
+    - Russian (thanks, Ilgiz Kalmetev).
+    - Spanish (thanks, Carlos Valdivia Yagüe; closes: #211832).
+  * Add Dutch debconf template translation (thanks, cobaco;
+    closes: #215372).
+  * Update config.guess and config.sub from autotools-dev 20031007.1
+    (closes: #217696).
+  * Implement New World Order for PAM configuration, including
+    /etc/pam.d/common-* from /etc/pam.d/ssh (closes: #212959).
+    - To backport this release to woody, you need to set DEB_BUILD_SSH_WOODY
+      in your environment. See README.Debian.
+  * Add more commentary to /etc/pam.d/ssh.
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 16 Nov 2003 01:14:16 +0000
+
+openssh (1:3.6.1p2-9) unstable; urgency=high
+
+  * Merge even more buffer allocation fixes from upstream (CAN-2003-0682;
+    closes: #211434).
+
+ -- Colin Watson <cjwatson@debian.org>  Fri, 19 Sep 2003 10:25:25 +0100
+
+openssh (1:3.6.1p2-8) unstable; urgency=high
+
+  * Merge more buffer allocation fixes from new upstream version 3.7.1p1
+    (closes: #211324).
+
+ -- Colin Watson <cjwatson@debian.org>  Wed, 17 Sep 2003 03:07:19 +0100
+
+openssh (1:3.6.1p2-7) unstable; urgency=high
+
+  * Update debconf template translations:
+    - French (thanks, Christian Perrier; closes: #208801).
+    - Japanese (thanks, Kenshi Muto; closes: #210380).
+  * Some small improvements to the English templates courtesy of Christian
+    Perrier. I've manually unfuzzied a few translations where it was
+    obvious, on Christian's advice, but the others will have to be updated.
+  * Document how to generate an RSA1 host key (closes: #141703).
+  * Incorporate NMU fix for early buffer expansion vulnerability,
+    CAN-2003-0693 (closes: #211205). Thanks to Michael Stone.
+
+ -- Colin Watson <cjwatson@debian.org>  Tue, 16 Sep 2003 14:32:28 +0100
+
+openssh (1:3.6.1p2-6.0) unstable; urgency=high
+
+  * SECURITY: fix for CAN-2003-0693, buffer allocation error
+
+ -- Michael Stone <mstone@debian.org>  Tue, 16 Sep 2003 08:27:07 -0400
+
+openssh (1:3.6.1p2-6) unstable; urgency=medium
+
+  * Use a more CVS-friendly means of setting SSH_VERSION.
+  * Update Brazilian Portuguese debconf template translation (thanks, Andre
+    Luis Lopes; closes: #208036).
+  * Don't run 'sshd -t' in init script if the server isn't to be run
+    (closes: #197576).
+  * Fix login delay, spurious auth.log entry, and PermitRootLogin
+    information leakage due to PAM issues with upstream's recent security
+    update (thanks, Darren Tucker; closes: #99168, #192207, #193546).
+  * Policy version 3.6.1: recode this changelog to UTF-8.
+
+ -- Colin Watson <cjwatson@debian.org>  Wed,  3 Sep 2003 19:14:02 +0100
+
+openssh (1:3.6.1p2-5) unstable; urgency=low
+
+  * Disable cmsg_type check for file descriptor passing when running on
+    Linux 2.0 (closes: #150976). Remove comments about non-functional
+    privilege separation on 2.0 from ssh/privsep_ask and ssh/privsep_tell
+    debconf questions and from README.Debian, since it should all now work.
+  * Fix "defails" typo in generated sshd_config (closes: #206484).
+  * Backport upstream patch to strip trailing whitespace (including
+    newlines) from configuration directives (closes: #192079).
+
+ -- Colin Watson <cjwatson@debian.org>  Wed, 27 Aug 2003 02:19:57 +0100
+
+openssh (1:3.6.1p2-4) unstable; urgency=low
+
+  * getent can get just one key; no need to use grep (thanks, James Troup).
+  * Move /usr/local/bin to the front of the default path, following
+    /etc/login.defs (closes: #201150).
+  * Remove specifics of problematic countries from package description
+    (closes: #197040).
+  * Update Spanish debconf template translation (thanks, Carlos Valdivia
+    Yagüe; closes: #198456).
+  * Backport upstream patch to pass monitor signals through to child
+    (closes: #164797).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 27 Jul 2003 17:31:15 +0100
+
+openssh (1:3.6.1p2-3) unstable; urgency=low
+
+  * Update French debconf template translation (thanks, Christian Perrier;
+    closes: #194323).
+  * Version the adduser dependency for --no-create-home (closes: #195756).
+  * Add a version of moduli(5), namely revision 1.7 of
+    http://www.openbsd.org/cgi-bin/cvsweb/src/share/man/man5/moduli.5 with
+    '/etc/moduli' changed to '/etc/ssh/moduli' throughout (closes: #196061).
+
+ -- Colin Watson <cjwatson@debian.org>  Mon,  9 Jun 2003 02:51:35 +0100
+
+openssh (1:3.6.1p2-2) unstable; urgency=low
+
+  * Force /etc/default/ssh to be non-executable, since dpkg apparently
+    doesn't deal with permissions changes on conffiles (closes: #192966).
+  * Use debconf 0.5's seen flag rather than the deprecated isdefault.
+  * Add GPL location to copyright file.
+  * Remove debian/postinst.old.
+  * Switch to po-debconf, with some careful manual use of po2debconf to
+    ensure that the source package continues to build smoothly on woody
+    (closes: #183986).
+  * Update debconf template translations:
+    - Brazilian Portugese (thanks, Andre Luis Lopes; see #183986).
+    - Japanese (thanks, Tomohiro KUBOTA; closes: #192429).
+  * Compile with -fno-builtin-log for now, otherwise gcc-3.3 complains
+    "log.h:59: warning: conflicting types for built-in function `log'". The
+    OpenSSH log() function has been renamed in upstream CVS.
+
+ -- Colin Watson <cjwatson@debian.org>  Mon, 19 May 2003 01:52:38 +0100
+
+openssh (1:3.6.1p2-1) unstable; urgency=medium
+
+  * New upstream release, including fix for PAM user-discovery security hole
+    (closes: #191681).
+  * Fix ChallengeResponseAuthentication default in generated sshd_config
+    (closes: #106037).
+  * Put newlines after full stops in man page documentation for
+    ProtocolKeepAlives and SetupTimeOut.
+  * Policy version 3.5.9: support DEB_BUILD_OPTIONS=noopt, build
+    gnome-ssh-askpass with -g and -Wall flags.
+  * Really ask ssh/new_config debconf question before trying to fetch its
+    value (closes: #188721).
+  * On purge, remove only the files we know about in /etc/ssh rather than
+    the whole thing, and remove the directory if that leaves it empty
+    (closes: #176679).
+  * ssh has depended on debconf for some time now with no complaints, so:
+    - Simplify the postinst by relying on debconf being present. (The absent
+      case was buggy anyway.)
+    - Get rid of "if you have not installed debconf" text in README.Debian,
+      and generally update the "/usr/bin/ssh not SUID" entry.
+  * More README.Debian work:
+    - Reorganize into "UPGRADE ISSUES" and "OTHER ISSUES", in an effort to
+      make it easier for people to find the former. The upgrade issues
+      should probably be sorted by version somehow.
+    - Document X11UseLocalhost under "X11 Forwarding" (closes: #150913).
+  * Fix setting of IP flags for interactive sessions (upstream bug #541).
+
+ -- Colin Watson <cjwatson@debian.org>  Mon,  5 May 2003 17:47:40 +0100
+
+openssh (1:3.6.1p1-1) unstable; urgency=low
+
+  * New upstream release (thanks, Laurence J. Lane).
+  * debian/control: ssh-askpass-gnome is now Section: gnome, following the
+    override file.
+
+ -- Colin Watson <cjwatson@debian.org>  Wed,  2 Apr 2003 00:51:02 +0100
+
+openssh (1:3.6p1-1) unstable; urgency=low
+
+  * New upstream release.
+    - Workaround applied upstream for a bug in the interaction of glibc's
+      getaddrinfo() with the Linux 2.2 kernel (closes: #155814).
+    - As such, it should now be safe to remove --with-ipv4-default, so
+      starting sshd with -6 is no longer necessary (closes: #79861 and lots
+      of other merged bugs).
+    - ssh-copy-id prints usage when run without arguments (closes: #71376).
+    - scp exits 1 if ssh fails (closes: #138400).
+    - sshd writes to utmp's ut_addr_v6 field in IPv6 mode (closes: #167867).
+    - 'ssh-add -c' causes ssh-agent to ask the user each time a key is used
+      (closes: #109795).
+  * Install /etc/default/ssh non-executable (closes: #185537).
+
+ -- Colin Watson <cjwatson@debian.org>  Mon, 31 Mar 2003 23:00:59 +0100
+
+openssh (1:3.5p1-5) unstable; urgency=low
+
+  * Add /etc/default/ssh (closes: #161049).
+  * Run the init script under 'set -e' (closes: #175010).
+  * Change the default superuser path to include /sbin, /usr/sbin, and
+    /usr/local/sbin (closes: #128235, #151267). Using login.defs would be
+    nice, but that belongs to another package. Without a defined API to
+    retrieve its settings, parsing it is off-limits.
+  * Build ssh-askpass-gnome with GNOME 2. The source package should still
+    support building on stable with GNOME 1, using the alternate
+    libgnome-dev build-dependency (thanks, Colin Walters; closes: #167582).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun,  9 Mar 2003 20:12:10 +0000
+
+openssh (1:3.5p1-4) unstable; urgency=low
+
+  * Point rlogin and rcp alternatives at slogin and scp respectively rather
+    than ssh (closes: #121103, #151666). Fix alternative removal to match;
+    previously it was completely wrong anyway.
+  * Find out whether /etc/ssh/sshd_not_to_be_run exists and set the debconf
+    question's default using that information, rather than using debconf as
+    a registry. Other solutions may be better in the long run, but this is
+    at least correct (thanks, Matthew Woodcraft; closes: #84725).
+  * Stop using pam_lastlog, as it doesn't currently work well as a session
+    module when privilege separation is enabled; it can usually read
+    /var/log/lastlog but can't write to it. Instead, just use sshd's
+    built-in support, already enabled by default (closes: #151297, #169938).
+  * Use 'ssh-keygen -q' rather than redirecting output to /dev/null.
+  * Add a "this may take some time" warning when creating host keys on
+    installation (part of #110094).
+  * When restarting via the init script, check for sshd_not_to_be_run after
+    stopping sshd (idea from Tomas Pospisek; closes: #149850).
+  * Append /usr/sbin:/sbin to the init script's $PATH, just in case of
+    strangeness (closes: #115138).
+  * Fix a dpkg-statoverride call to redirect stdout to /dev/null, not
+    stderr.
+  * Correct copyright file typo: "orignal" -> "original" (closes: #176490).
+  * Rebuild with libssl0.9.7 (closes: #176983).
+  * We're up to policy version 3.5.6. DEB_BUILD_OPTIONS stuff still needs to
+    be looked at.
+
+ -- Colin Watson <cjwatson@debian.org>  Sat, 18 Jan 2003 01:37:23 +0000
+
+openssh (1:3.5p1-3) unstable; urgency=low
+
+  * Happy new year!
+  * Use getent rather than id to find out whether the sshd user exists
+    (closes: #150974).
+  * Remove some duplication from the postinst's ssh-keysign setuid code.
+  * Replace db_text with db_input throughout debian/config. (db_text has
+    been a compatibility wrapper since debconf 0.1.5.)
+  * Warn about PermitUserEnvironment on upgrade (closes: #167895).
+  * Use 'make install-nokeys', and disable unused debhelper commands,
+    thereby forward-porting the last pieces of Zack Weinberg's patch
+    (closes: #68341).
+  * Move the man page for gnome-ssh-askpass from the ssh package to
+    ssh-askpass-gnome (closes: #174449).
+  * Build with -DLOGIN_NO_ENDOPT, since Debian's /bin/login doesn't accept
+    '--' to terminate the list of options (closes: #171554).
+  * Add Jonathan Amery's ssh-argv0 script (closes: #111341).
+  * Update Danish debconf template (thanks, Morten Brix Pedersen;
+    closes: #174757).
+  * Document setgid ssh-agent's effect on certain environment variables in
+    README.Debian (closes: #167974).
+  * Document interoperability problems between scp and ssh.com's server in
+    README.Debian, and suggest some workarounds (closes: #174662).
+
+ -- Colin Watson <cjwatson@debian.org>  Wed,  1 Jan 2003 14:18:30 +0000
+
+openssh (1:3.5p1-2) unstable; urgency=low
+
+  * Mention in the ssh package description that it provides both ssh and
+    sshd (closes: #99680).
+  * Create a system group for ssh-agent, not a user group (closes: #167669).
+
+ -- Colin Watson <cjwatson@debian.org>  Mon,  4 Nov 2002 13:43:53 +0000
+
+openssh (1:3.5p1-1) unstable; urgency=low
+
+  * New upstream release.
+    - Fixes typo in ssh-add usage (closes: #152239).
+    - Fixes 'PermitRootLogin forced-commands-only' (closes: #166184).
+    - ~/.ssh/environment and environment= options in ~/.ssh/authorized_keys
+      are deprecated for security reasons and will eventually go away. For
+      now they can be re-enabled by setting 'PermitUserEnvironment yes' in
+      sshd_config.
+    - ssh-agent is installed setgid to prevent ptrace() attacks. The group
+      actually doesn't matter, as it drops privileges immediately, but to
+      avoid confusion the postinst creates a new 'ssh' group for it.
+  * Obsolete patches:
+    - Solar Designer's privsep+compression patch for Linux 2.2 (see
+      1:3.3p1-0.0woody1).
+    - Hostbased auth ssh-keysign backport (see 1:3.4p1-4).
+
+  * Remove duplicated phrase in ssh_config(5) (closes: #152404).
+  * Source the debconf confmodule at the top of the postrm rather than at
+    the bottom, to avoid making future non-idempotency problems worse (see
+    #151035).
+  * Debconf templates:
+    - Add Polish (thanks, Grzegorz Kusnierz).
+    - Update French (thanks, Denis Barbier; closes: #132509).
+    - Update Spanish (thanks, Carlos Valdivia Yagüe; closes: #164716).
+  * Write a man page for gnome-ssh-askpass, and link it to ssh-askpass.1 if
+    this is the selected ssh-askpass alternative (closes: #67775).
+
+ -- Colin Watson <cjwatson@debian.org>  Sat, 26 Oct 2002 19:41:51 +0100
+
+openssh (1:3.4p1-4) unstable; urgency=low
+
+  * Allow ssh-krb5 in ssh-askpass-gnome's dependencies (closes: #129532).
+  * Restore Russia to list of countries where encryption is problematic (see
+    #148951 and http://www.average.org/freecrypto/).
+  * Drop ssh-askpass-gnome's priority to optional, per the override file.
+  * Drop the PAM special case for hurd-i386 (closes: #99157).
+  * s/dile/idle/ in ssh_config(5) (closes: #118331).
+  * Note in README.Debian that you need xauth from xbase-clients on the
+    server for X11 forwarding (closes: #140269).
+  * Use correct path to upstream README in copyright file (closes: #146037).
+  * Document the units for ProtocolKeepAlives (closes: #159479).
+  * Backport upstream patch to fix hostbased auth (closes: #117114).
+  * Add -g to CFLAGS.
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 13 Oct 2002 18:58:53 +0100
+
+openssh (1:3.4p1-3) unstable; urgency=low
+
+  * Add myself to Uploaders: and begin acting as temporary maintainer, at
+    Matthew's request. (Normal service will resume in some months' time.)
+  * Add sharutils to Build-Depends (closes: #138465).
+  * Stop creating the /usr/doc/ssh symlink.
+
+  * Fix some debconf template typos (closes: #160358).
+  * Split debconf templates into one file per language.
+  * Add debconf template translations:
+    - Brazilian Portuguese (thanks, Andre Luis Lopes; closes: #106173).
+    - Danish (thanks, Claus Hindsgaul; closes: #126607).
+    - Japanese (thanks, Tomohiro KUBOTA; closes: #137427).
+    - Russian (thanks, Ilgiz Kalmetev; closes: #136610).
+    - Spanish (thanks, Carlos Valdivia Yagüe; closes: #129041).
+  * Update debconf template translations:
+    - French (thanks, Igor Genibel; closes: #151361).
+    - German (thanks, Axel Noetzold; closes: #147069).
+  * Some of these translations are fuzzy. Please send updates.
+
+ -- Colin Watson <cjwatson@debian.org>  Sun, 13 Oct 2002 14:09:57 +0100
+
+openssh (1:3.4p1-2) unstable; urgency=high
+
+  * Get a security-fixed version into unstable
+  * Also tidy README.Debian up a little
+
+ -- Matthew Vernon <matthew@debian.org>  Fri, 28 Jun 2002 17:20:59 +0100
+        
+openssh (1:3.4p1-1) testing; urgency=high
+
+  * Extend my tendrils back into this package (Closes: #150915, #151098)
+  * thanks to the security team for their work
+  * no thanks to ISS/Theo de Raadt for their handling of these bugs
+  * save old sshd_configs to sshd_config.dpkg-old when auto-generating a
+    new one
+  * tell/ask the user about PriviledgeSeparation
+  * /etc/init.d/ssh run will now create the chroot empty dir if necessary 
+  * Remove our previous statoverride on /usr/bin/ssh (only for people 
+    upgrading from a version where we'd put one in ourselves!)
+  * Stop slandering Russia, since someone asked so nicely (Closes: #148951)
+  * Reduce the sleep time in /etc/init.d/ssh during a restart
+        
+ -- Matthew Vernon <matthew@debian.org>  Fri, 28 Jun 2002 15:52:10 +0100
+        
+openssh (1:3.4p1-0.0woody1) testing-security; urgency=high
+
+  * NMU by the security team.
+  * New upstream version
+
+ -- Michael Stone <mstone@debian.org>  Wed, 26 Jun 2002 15:40:38 -0400
+
+openssh (1:3.3p1-0.0woody4) testing-security; urgency=high
+
+  * NMU by the security team.
+  * fix error when /etc/ssh/sshd_config exists on new install
+  * check that user doesn't exist before running adduser
+  * use openssl internal random unconditionally
+
+ -- Michael Stone <mstone@debian.org>  Tue, 25 Jun 2002 19:44:39 -0400
+
+openssh (1:3.3p1-0.0woody3) testing-security; urgency=high
+
+  * NMU by the security team.
+  * use correct home directory when sshd user is created
+
+ -- Michael Stone <mstone@debian.org>  Tue, 25 Jun 2002 08:59:50 -0400
+
+openssh (1:3.3p1-0.0woody2) testing-security; urgency=high
+
+  * NMU by the security team.
+  * Fix rsa1 key creation (Closes: #150949)
+  * don't fail if sshd user removal fails
+  * depends: on adduser (Closes: #150907)
+
+ -- Michael Stone <mstone@debian.org>  Tue, 25 Jun 2002 08:59:50 -0400
+
+openssh (1:3.3p1-0.0woody1) testing-security; urgency=high
+
+  * NMU by the security team.
+  * New upstream version.
+    - Enable privilege separation by default.
+  * Include patch from Solar Designer for privilege separation and
+    compression on 2.2.x kernels.
+  * Remove --disable-suid-ssh from configure.
+  * Support setuid ssh-keysign binary instead of setuid ssh client.
+  * Check sshd configuration before restarting.
+
+ -- Daniel Jacobowitz <dan@debian.org>  Mon, 24 Jun 2002 13:43:44 -0400
+
+openssh (1:3.0.2p1-9) unstable; urgency=high
+
+  * Thanks to those who NMUd
+  * The only change in this version is to debian/control - I've removed
+    the bit that says you can't export it from the US - it would look 
+    pretty daft to say this about a package in main! Also, it's now OK
+    to use crypto in France, so I've edited that comment slightly
+  * Correct a path in README.Debian too (Closes: #138634)
+
+ -- Matthew Vernon <matthew@debian.org>  Sun,  4 Apr 2002 09:52:59 +0100
+        
+openssh (1:3.0.2p1-8.3) unstable; urgency=medium
+
+  * NMU
+  * Really set urgency to medium this time (oops)
+  * Fix priority to standard per override while I'm at it
+
+ -- Aaron M. Ucko <ucko@debian.org>  Sun, 24 Mar 2002 09:00:08 -0500
+
+openssh (1:3.0.2p1-8.2) unstable; urgency=low
+
+  * NMU with maintainer's permission
+  * Prepare for upcoming ssh-nonfree transitional packages per
+    <http://lists.debian.org/debian-ssh/2002/debian-ssh-200203/msg00008.html>
+  * Urgency medium because it would really be good to get this into woody
+    before it releases
+  * Fix sections to match override file
+  * Reissued due to clash with non-US -> main move
+
+ -- Aaron M. Ucko <ucko@debian.org>  Sat, 23 Mar 2002 21:21:52 -0500
+
+openssh (1:3.0.2p1-8.1) unstable; urgency=low
+
+  * NMU
+  * Move from non-US to mani
+
+ -- LaMont Jones <lamont@debian.org>  Thu, 21 Mar 2002 09:33:50 -0700
+
+openssh (1:3.0.2p1-8) unstable; urgency=critical
+
+  * Security fix - patch from upstream (Closes: #137209, #137210)
+  * Undo the changes in the unreleased -7, since they appear to break 
+    things here. Accordingly, the code change is minimal, and I'm 
+    happy to get it into testing ASAP
+        
+ -- Matthew Vernon <matthew@debian.org>  Thu,  7 Mar 2002 14:25:23 +0000
+
+openssh (1:3.0.2p1-7) unstable; urgency=high
+
+  * Build to support IPv6 and IPv4 by default again
+
+ -- Matthew Vernon <matthew@debian.org>  Sat,  2 Mar 2002 00:25:05 +0000
+        
+openssh (1:3.0.2p1-6) unstable; urgency=high
+
+  * Correct error in the clean target (Closes: #130868)
+
+ -- Matthew Vernon <matthew@debian.org>  Sat, 26 Jan 2002 00:32:00 +0000
+
+openssh (1:3.0.2p1-5) unstable; urgency=medium
+
+  * Include the Debian version in our identification, to make it easier to
+    audit networks for patched versions in future
+
+ -- Matthew Vernon <matthew@debian.org>  Mon, 21 Jan 2002 17:16:10 +0000
+        
+openssh (1:3.0.2p1-4) unstable; urgency=medium
+
+  * If we're asked to not run sshd, stop any running sshd's first 
+    (Closes: #129327)
+
+ -- Matthew Vernon <matthew@debian.org>  Wed, 16 Jan 2002 21:24:16 +0000
+        
+openssh (1:3.0.2p1-3) unstable; urgency=high
+
+  * Fix /etc/pam.d/ssh to not set $MAIL (Closes: #128913)
+  * Remove extra debconf suggestion (Closes: #128094)
+  * Mmm. speedy bug-fixing :-)
+
+ -- Matthew Vernon <matthew@debian.org>  Sat, 12 Jan 2002 17:23:58 +0000
+        
+openssh (1:3.0.2p1-2) unstable; urgency=high
+
+  * Fix postinst to not automatically overwrite sshd_config (!) 
+    (Closes: #127842, #127867)
+  * Add section in README.Debian about the PermitRootLogin setting
+        
+ -- Matthew Vernon <matthew@debian.org>  Sat,  5 Jan 2003 05:26:30 +0000
+        
+openssh (1:3.0.2p1-1) unstable; urgency=high
+
+  * Incorporate fix from Colin's NMU
+  * New upstream version (fixes the bug Wichert fixed) (Closes: #124035)
+  * Capitalise IETF (Closes: #125379)
+  * Refer to the correct sftp-server location (Closes: #126854, #126224)
+  * Do what we're asked re SetUID ssh (Closes: #124065, #124154, #123247)
+  * Ask people upgrading from potato if they want a new conffile 
+    (Closes: #125642)
+  * Fix a typo in postinst (Closes: #122192, #122410, #123440)
+  * Frob the default config a little (Closes: #122284, #125827, #125696,
+    #123854)
+  * Make /etc/init.d/ssh be more clear about ssh not running (Closes:
+    #123552)
+  * Fix typo in templates file (Closes: #123411)
+
+ -- Matthew Vernon <matthew@debian.org>  Fri,  4 Jan 2002 16:01:52 +0000
+        
+openssh (1:3.0.1p1-1.2) unstable; urgency=high
+
+  * Non-maintainer upload
+  * Prevent local users from passing environment variables to the login
+    process when UseLogin is enabled
+
+ -- Wichert Akkerman <wakkerma@debian.org>  Mon,  3 Dec 2001 19:34:45 +0100
+
+openssh (1:3.0.1p1-1.1) unstable; urgency=low
+
+  * Non-maintainer upload, at Matthew's request.
+  * Remove sa_restorer assignment to fix compilation on alpha, hppa, and
+    ia64 (closes: #122086).
+
+ -- Colin Watson <cjwatson@debian.org>  Sun,  2 Dec 2001 18:54:16 +0000
+
+openssh (1:3.0.1p1-1) unstable; urgency=high
+
+  * New upstream version (Closes: #113646, #113513, #114707, #118564)
+  * Building with a libc that works (!) (Closes: #115228)
+  * Patches forward-ported are -1/-2 options for scp, the improvement to
+    'waiting for forwarded connections to terminate...'
+  * Fix /etc/init.d/ssh to stop sshd properly (Closes: #115228)
+  * /etc/ssh/sshd_config is no longer a conffile but generated in the postinst
+  * Remove suidregister leftover from postrm
+  * Mention key we are making in the postinst
+  * Default to not enable SSH protocol 1 support, since protocol 2 is
+    much safer anyway.
+  * New version of the vpn-fixes patch, from Ian Jackson
+  * New handling of -q, and added new -qq option; thanks to Jon Amery
+  * Experimental smartcard support not enabled, since I have no way of
+    testing it.
+        
+ -- Matthew Vernon <matthew@debian.org>  Thu, 28 Nov 2001 17:43:01 +0000
+        
+openssh (1:2.9p2-6) unstable; urgency=low
+
+  * check for correct file in /etc/init.d/ssh (Closes: #110876)
+  * correct location of version 2 keys in ssh.1 (Closes: #110439)
+  * call update-alternatives --quiet (Closes: #103314)
+  * hack ssh-copy-id to chmod go-w (Closes: #95551)
+  * TEMPORARY fix to provide largefile support using a -D in the cflags
+    line. long-term, upstream will patch the autoconf stuff
+    (Closes: #106809, #111849)
+  * remove /etc/rc references in ssh-keygen.1 (Closes: #68350)
+  * scp.1 patch from Adam McKenna to document -r properly (Closes: #76054)
+  * Check for files containing a newline character (Closes: #111692)
+
+ -- Matthew Vernon <matthew@debian.org>  Thu, 13 Sep 2001 16:47:36 +0100
+
+openssh (1:2.9p2-5) unstable; urgency=high
+
+  * Thanks to all the bug-fixers who helped!
+  * remove sa_restorer assignment (Closes: #102837)
+  * patch from Peter Benie to DTRT wrt X forwarding if the server refuses
+    us access (Closes: #48297)
+  * patch from upstream CVS to fix port forwarding (Closes: #107132)
+  * patch from Jonathan Amery to document ssh-keygen behaviour 
+    (Closes:#106643, #107512)
+  * patch to postinst from Jonathan Amery (Closes: #106411)
+  * patch to manpage from Jonathan Amery (Closes: #107364)
+  * patch from Matthew Vernon to make -q emit fatal errors as that is the
+    documented behaviour (Closes: #64347)
+  * patch from Ian Jackson to cause us to destroy a file when we scp it
+    onto itself, rather than dumping bits of our memory into it, which was
+    a security hole (see #51955)
+  * patch from Jonathan Amery to document lack of Kerberos support 
+    (Closes: #103726)
+  * patch from Matthew Vernon to make the 'waiting for connections to
+    terminate' message more helpful (Closes: #50308)
+
+ -- Matthew Vernon <matthew@debian.org>  Thu, 23 Aug 2001 02:14:09 +0100
+        
+openssh (1:2.9p2-4) unstable; urgency=high
+
+  * Today's build of ssh is strawberry flavoured
+  * Patch from mhp to reduce length of time sshd is stopped for (Closes: #106176)
+  * Tidy up debconf template (Closes: #106152)
+  * If called non-setuid, then setgid()'s failure should not be fatal (see
+    #105854)
+
+ -- Matthew Vernon <matthew@debian.org>  Sun, 22 Jul 2001 14:19:43 +0100
+        
+openssh (1:2.9p2-3) unstable; urgency=low
+
+  * Patch from yours truly to add -1 and -2 options to scp (Closes: #106061)
+  * Improve the IdentityFile section in the man page (Closes: #106038)
+
+ -- Matthew Vernon <matthew@debian.org>  Sat, 21 Jul 2001 14:47:27 +0100
+        
+openssh (1:2.9p2-2) unstable; urgency=low
+
+  * Document the protocol version 2 and IPV6 changes (Closes: #105845, #105868)
+  * Make PrintLastLog 'no' by default (Closes: #105893)
+        
+ -- Matthew Vernon <matthew@debian.org>  Thu, 19 Jul 2001 18:36:41 +0100
+        
+openssh (1:2.9p2-1) unstable; urgency=low
+
+  * new (several..) upstream version (Closes: #96726, #81856, #96335)
+  * Hopefully, this will close some other bugs too
+
+ -- Matthew Vernon <matthew@debian.org>  Tue, 17 Jul 2001 19:41:58 +0100
+        
+openssh (1:2.5.2p2-3) unstable; urgency=low
+
+  * Taking Over this package
+  * Patches from Robert Bihlmeyer for the Hurd (Closes: #102991)
+  * Put PermitRootLogin back to yes (Closes: #67334, #67371, #78274)
+  * Don't fiddle with conf-files any more (Closes: #69501)
+        
+ -- Matthew Vernon <matthew@debian.org>  Tue, 03 Jul 2001 02:58:13 +0100
+        
+openssh (1:2.5.2p2-2.2) unstable; urgency=low
+
+  * NMU
+  * Include Hurd compatibility patches from Robert Bihlmeyer (Closes: #76033)
+  * Patch from Richard Kettlewell for protocolkeepalives (Closes: #99273)
+  * Patch from Matthew Vernon for BannerTimeOut, batchmode, and
+    documentation for protocolkeepalives. Makes ssh more generally useful
+    for scripting uses (Closes: #82877, #99275)
+  * Set a umask, so ourpidfile isn't world-writable (closes: #100012,
+    #98286, #97391)
+
+ -- Matthew Vernon <matthew@debian.org>  Thu, 28 Jun 2001 23:15:42 +0100
+
+openssh (1:2.5.2p2-2.1) unstable; urgency=low
+ 
+  * NMU
+  * Remove duplicate Build-Depends for libssl096-dev and change it to 
+    depend on libssl-dev instaed.  Also adding in virtual | real package
+    style build-deps.  (Closes: #93793, #75228)
+  * Removing add-log entry (Closes: #79266)
+  * This was a pam bug from a while back (Closes: #86908, #88457, #86843)
+  * pam build-dep already exists (Closes: #93683)
+  * libgnome-dev build-dep already exists (Closes: #93694)
+  * No longer in non-free (Closes: #85401)
+  * Adding in fr debconf translations (Closes: #83783)
+  * Already suggests xbase-clients (Closes: #79741)
+  * No need to suggest libpam-pwdb anymore (Closes: #81658)
+  * Providing rsh-client (Closes: #79437)
+  * hurd patch was already applied (Closes: #76033)
+  * default set to no (Closes: #73682)
+  * Adding in a suggests for dnsutils (Closes: #93265)
+  * postinst bugs fixed (Closes: #88057, #88066, #88196, #88405, #88612)
+    (Closes: #88774, #88196, #89556, #90123, #90228, #90833, #87814, #85465)
+  * Adding in debconf dependency
+ 
+ -- Ivan E. Moore II <rkrusty@debian.org>  Mon, 16 Apr 2001 14:11:04 +0100
+
+openssh (1:2.5.2p2-2) unstable; urgency=high
+
+  * disable the OpenSSL version check in entropy.c
+    (closes: #93581, #93588, #93590, #93614, #93619, #93635, #93648)
+
+ -- Philip Hands <phil@uk.alcove.com>  Wed, 11 Apr 2001 20:30:04 +0100
+
+openssh (1:2.5.2p2-1) unstable; urgency=low
+
+  * New upstream release
+  * removed make-ssh-known-hosts, since ssh-keyscan does that job (closes: #86069, #87748)
+  * fix double space indent in german templates (closes: #89493)
+  * make postinst check for ssh_host_rsa_key
+  * get rid of the last of the misguided debian/rules NMU debris  :-/
+
+ -- Philip Hands <phil@hands.com>  Sat, 24 Mar 2001 20:59:33 +0000
+
+openssh (1:2.5.1p2-2) unstable; urgency=low
+
+  * rebuild with new debhelper (closes: #89558, #89536, #90225)
+  * fix broken dpkg-statoverride test in postinst
+    (closes: #89612, #90474, #90460, #89605)
+  * NMU bug fixed but not closed in last upload  (closes: #88206)
+  
+ -- Philip Hands <phil@hands.com>  Fri, 23 Mar 2001 16:11:33 +0000
+
+openssh (1:2.5.1p2-1) unstable; urgency=high
+
+  * New upstream release
+  * fix typo in postinst (closes: #88110)
+  * revert to setting PAM service name in debian/rules, backing out last
+    NMU, which also (closes: #88101)
+  * restore the pam lastlog/motd lines, lost during the NMUs, and sshd_config
+  * restore printlastlog option patch
+  * revert to using debhelper, which had been partially disabled in NMUs
+
+ -- Philip Hands <phil@hands.com>  Tue, 13 Mar 2001 01:41:34 +0000
+
+openssh (1:2.5.1p1-1.8) unstable; urgency=high
+
+  * And now the old pam-bug s/sshd/ssh in ssh.c is also fixed
+
+ -- Christian Kurz <shorty@debian.org>  Thu,  1 Mar 2001 19:48:01 +0100
+
+openssh (1:2.5.1p1-1.7) unstable; urgency=high
+
+  * And now we mark the correct binary as setuid, when a user requested
+    to install it setuid.
+
+ -- Christian Kurz <shorty@debian.org>  Thu,  1 Mar 2001 07:19:56 +0100
+
+openssh (1:2.5.1p1-1.6) unstable; urgency=high
+
+  * Fixes postinst to handle overrides that are already there. Damn, I 
+    should have noticed the bug earlier.
+
+ -- Christian Kurz <shorty@debian.org>  Wed, 28 Feb 2001 22:35:00 +0100
+
+openssh (1:2.5.1p1-1.5) unstable; urgency=high
+
+  * Rebuild ssh with pam-support.
+
+ -- Christian Kurz <shorty@debian.org>  Mon, 26 Feb 2001 21:55:51 +0100
+
+openssh (1:2.5.1p1-1.4) unstable; urgency=low
+
+  * Added Build-Depends on libssl096-dev.
+  * Fixed sshd_config file to disallow root logins again.
+
+ -- Christian Kurz <shorty@debian.org>  Sun, 25 Feb 2001 20:03:55 +0100
+
+openssh (1:2.5.1p1-1.3) unstable; urgency=low
+
+  * Fixed missing manpages for sftp.1 and ssh-keyscan.1
+  * Made package policy 3.5.2 compliant.
+
+ -- Christian Kurz <shorty@debian.org>  Sun, 25 Feb 2001 15:46:26 +0100
+
+openssh (1:2.5.1p1-1.2) unstable; urgency=low
+
+  * Added Conflict with sftp, since we now provide our own sftp-client.
+  * Added a fix for our broken dpkg-statoverride call in the 
+    2.3.0p1-13.
+  * Fixed some config pathes in the comments of sshd_config.
+  * Removed ssh-key-exchange-vulnerability-patch since it's not needed
+    anymore because upstream included the fix.
+
+ -- Christian Kurz <shorty@debian.org>  Sun, 25 Feb 2001 13:46:58 +0100
+
+openssh (1:2.5.1p1-1.1) unstable; urgency=high
+
+  * Another NMU to get the new upstream version 2.5.1p1 into
+    unstable. (Closes: #87123)
+  * Corrected postinst to mark ssh as setuid. (Closes: #86391, #85766)
+  * Key Exchange patch is already included by upstream. (Closes: #86015)
+  * Upgrading should be possible now. (Closes: #85525, #85523)
+  * Added --disable-suid-ssh as compile option, so ssh won't get installed
+    suid per default.
+  * Fixed postinst to run dpkg-statoverride only, when dpkg-statoverride
+    is available and the mode of the binary should be 4755. And also added
+    suggestion for a newer dpkg.
+    (Closes: #85734, #85741, #86876)
+  * sftp and ssh-keyscan will also be included from now on. (Closes: #79994)
+  * scp now understands spaces in filenames (Closes: #53783, #58958,
+    #66723)
+  * ssh-keygen now supports showing DSA fingerprints. (Closes: #68623)
+  * ssh doesn' t show motd anymore when switch -t is used. (Closes #69035)
+  * ssh supports the usage of other dsa keys via the ssh command line
+    options. (Closes: #81250)
+  * Documentation in sshd_config fixed. (Closes: #81088)
+  * primes file included by upstream and included now. (Closes: #82101)
+  * scp now allows dots in the username. (Closes: #82477)
+  * Spelling error in ssh-copy-id.1 corrected by upstream. (Closes: #78124)
+
+ -- Christian Kurz <shorty@debian.org>  Sun, 25 Feb 2001 10:06:08 +0100
+
+openssh (1:2.3.0p1-1.13) unstable; urgency=low
+
+  * Config should now also be fixed with this hopefully last NMU.
+
+ -- Christian Kurz <shorty@debian.org>  Sat, 10 Feb 2001 22:56:36 +0100
+
+openssh (1:2.3.0p1-1.12) unstable; urgency=high
+
+  * Added suggest for xbase-clients to control-file. (Closes #85227)
+  * Applied patch from Markus Friedl to fix a vulnerability in 
+    the rsa keyexchange.
+  * Fixed position of horizontal line. (Closes: #83613)
+  * Fixed hopefully the grep problem in the config-file. (Closes: #78802)
+  * Converted package from suidregister to dpkg-statoverride.
+
+ -- Christian Kurz <shorty@debian.org>  Fri,  9 Feb 2001 19:43:55 +0100
+
+openssh (1:2.3.0p1-1.11) unstable; urgency=medium
+
+  * Fixed some typos in the german translation of the debconf
+    template.
+
+ -- Christian Kurz <shorty@debian.org>  Wed, 24 Jan 2001 18:22:38 +0100
+
+openssh (1:2.3.0p1-1.10) unstable; urgency=medium
+
+  * Fixed double printing of motd. (Closes: #82618)
+
+ -- Christian Kurz <shorty@debian.org>  Tue, 23 Jan 2001 21:03:43 +0100
+
+openssh (1:2.3.0p1-1.9) unstable; urgency=high
+
+  * And the next NMU which includes the patch from Andrew Bartlett
+    and Markus Friedl to fix the root privileges handling of openssh.
+    (Closes: #82657)
+
+ -- Christian Kurz <shorty@debian.org>  Wed, 17 Jan 2001 22:20:54 +0100
+
+openssh (1:2.3.0p1-1.8) unstable; urgency=high
+
+  * Applied fix from Ryan Murray to allow building on other architectures
+    since the hurd patch was wrong. (Closes: #82471)
+
+ -- Christian Kurz <shorty@debian.org>  Tue, 16 Jan 2001 22:45:51 +0100
+
+openssh (1:2.3.0p1-1.7) unstable; urgency=medium
+
+  * Fixed another typo on sshd_config
+
+ -- Christian Kurz <shorty@debian.org>  Sun, 14 Jan 2001 19:01:31 +0100
+
+openssh (1:2.3.0p1-1.6) unstable; urgency=high
+
+  * Added Build-Dependency on groff (Closes: #81886)
+  * Added Build-Depencency on debhelper (Closes: #82072)
+  * Fixed entry for known_hosts in sshd_config (Closes: #82096)
+
+ -- Christian Kurz <shorty@debian.org>  Thu, 11 Jan 2001 23:08:16 +0100
+
+openssh (1:2.3.0p1-1.5) unstable; urgency=high
+
+  * Fixed now also the problem with sshd used as default ipv4 and
+    didn't use IPv6. This should be now fixed.
+
+ -- Christian Kurz <shorty@debian.org>  Thu, 11 Jan 2001 21:25:55 +0100
+
+openssh (1:2.3.0p1-1.4) unstable; urgency=high
+
+  * Fixed buggy entry in postinst.
+
+ -- Christian Kurz <shorty@debian.org>  Wed, 10 Jan 2001 23:12:16 +0100
+
+openssh (1:2.3.0p1-1.3) unstable; urgency=high
+
+  * After finishing the rewrite of the rules-file I had to notice that
+    the manpage installation was broken. This should now work again.
+
+ -- Christian Kurz <shorty@debian.org>  Wed, 10 Jan 2001 22:11:59 +0100
+
+openssh (1:2.3.0p1-1.2) unstable; urgency=high
+
+  * Fixed the screwed up build-dependency.
+  * Removed --with-ipv4-default to support ipv6.
+  * Changed makefile to use /etc/pam.d/ssh instead of /etc/pam.d/sshd.
+  * Fixed location to sftp-server in config.
+  * Since debian still relies on /etc/pam.d/ssh instead of moving to
+    /etc/pam.d/sshd, I had to hack ssh.h to get ssh to use this name.
+  * Fixed path to host key in sshd_config.
+
+ -- Christian Kurz <shorty@debian.org>  Wed, 10 Jan 2001 08:23:47 +0100
+
+openssh (1:2.3.0p1-1.1) unstable; urgency=medium
+
+  * NMU with permission of Phil Hands.
+  * New upstream release
+  * Update Build-Depends to point to new libssl096.
+  * This upstream release doesn't leak any information depending
+    on the setting of PermitRootLogin (Closes: #59933)
+  * New upstream release contains fix against forcing a client to 
+    do X/agent forwarding (Closes: #76788)
+  * Changed template to contain correct path to the documentation 
+    (Closes: #67245)
+  * Added --with-4in6 switch as compile option into debian/rules.       
+  * Added --with-ipv4-default as compile option into debian/rules. 
+    (Closes: #75037)
+  * Changed default path to also contain /usr/local/bin and 
+    /usr/X11R6/bin (Closes: #62472,#54567,#62810)
+  * Changed path to sftp-server in sshd_config to match the
+    our package (Closes: #68347)
+  * Replaced OpenBSDh with OpenBSD in the init-script.  
+  * Changed location to original source in copyright.head
+  * Changed behaviour of init-script when invoked with the option
+    restart (Closes: #68706,#72560)
+  * Added a note about -L option of scp to README.Debian        
+  * ssh won't print now the motd if invoked with -t option
+    (Closes: #59933)
+  * RFC.nroff.gz get's now converted into RFC.gz. (Closes: #63867)      
+  * Added a note about tcp-wrapper support to README.Debian 
+    (Closes: #72807,#22190)
+  * Removed two unneeded options from building process. 
+  * Added sshd.pam into debian dir and install it.
+  * Commented out unnecessary call to dh_installinfo.
+  * Added a line to sshd.pam so that limits will be paid attention
+    to (Closes: #66904)
+  * Restart Option has a Timeout of 10 seconds (Closes: 51264)
+  * scp won't override files anymore (Closes: 51955)
+  * Removed pam_lastlog module, so that the lastlog is now printed
+    only once (Closes: #71742, #68335, #69592, #71495, #77781)
+  * If password is expired, openssh now forces the user to change it.
+    (Closes: #51747)
+  * scp should now have no more problems with shell-init-files that
+    produces ouput (Closes: #56280,#59873)
+  * ssh now prints the motd correctly (Closes: #66926)  
+  * ssh upgrade should disable ssh daemon only if users has choosen
+    to do so (Closes: #67478)
+  * ssh can now be installed suid (Closes: #70879)      
+  * Modified debian/rules to support hurd.
+
+ -- Christian Kurz <shorty@debian.org>  Wed, 27 Dec 2000 20:06:57 +0100
+
+openssh (1:2.2.0p1-1.1) unstable; urgency=medium
+
+  * Non-Maintainer Upload
+  * Check for new returns in the new libc
+    (closes: #72803, #74393, #72797, #71307, #71702)
+  * Link against libssl095a (closes: #66304)
+  * Correct check for PermitRootLogin (closes: #69448)
+
+ -- Ryan Murray <rmurray@debian.org>  Wed, 18 Oct 2000 00:48:18 -0700
+
+openssh (1:2.2.0p1-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Philip Hands <phil@hands.com>  Mon, 11 Sep 2000 14:49:43 +0100
+
+openssh (1:2.1.1p4-3) unstable; urgency=low
+
+  * add rsh alternatives
+  * add -S option to scp (using Tommi Virtanen's patch) (closes: #63097)
+  * do the IPV4_DEFAULT thing properly this time
+
+ -- Philip Hands <phil@hands.com>  Fri, 11 Aug 2000 18:14:37 +0100
+
+openssh (1:2.1.1p4-2) unstable; urgency=low
+
+  * reinstate manpage .out patch from 1:1.2.3
+  * fix typo in postinst
+  * only compile ssh with IPV4_DEFAULT
+  * apply James Troup's patch to add a -o option to scp and updated manpage
+
+ -- Philip Hands <phil@hands.com>  Sun, 30 Jul 2000 00:12:49 +0100
+
+openssh (1:2.1.1p4-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Philip Hands <phil@hands.com>  Sat, 29 Jul 2000 14:46:16 +0100
+
+openssh (1:1.2.3-10) unstable; urgency=low
+
+  * add version to libpam-modules dependency, because old versions of
+    pam_motd make it impossible to log in.
+
+ -- Philip Hands <phil@hands.com>  Sat, 29 Jul 2000 13:28:22 +0100
+
+openssh (1:1.2.3-9) frozen unstable; urgency=low
+
+  * force location of /usr/bin/X11/xauth
+    (closes: #64424, #66437, #66859)  *RC*
+  * typos in config (closes: #66779, #66780)
+  * sshd_not_to_be_run could be assumed to be true, in error, if the config
+    script died in an unusual way --- I've reversed this (closes: #66335)  
+  * Apply Zack Weinberg <zack@wolery.cumb.org>'s patch to ssh-askpass-ptk
+    (closes: #65981)
+  * change default for PermitRootLogin to "no" (closes: #66406)
+
+ -- Philip Hands <phil@hands.com>  Tue, 11 Jul 2000 20:51:18 +0100
+
+openssh (1:1.2.3-8) frozen unstable; urgency=low
+
+  * get rid of Provides: rsh-server (this will mean that rstartd
+    will need to change it's depends to deal with #63948, which I'm
+    reopening)  (closes: #66257)
+    Given that this is also a trivial change, and is a reversal of a
+    change that was mistakenly made after the freeze, I think this should
+    also go into frozen.
+
+ -- Philip Hands <phil@hands.com>  Wed, 28 Jun 2000 03:26:30 +0100
+
+openssh (1:1.2.3-7) frozen unstable; urgency=low
+
+  * check if debconf is installed before calling db_stop in postinst.
+    This is required to allow ssh to be installed when debconf is not
+    wanted, which probably makes it an RC upload (hopefully the last of
+    too many).
+
+ -- Philip Hands <phil@hands.com>  Wed, 28 Jun 2000 03:19:47 +0100
+
+openssh (1:1.2.3-6) frozen unstable; urgency=low
+
+  * fixed depressing little bug involving a line wrap looking like
+    a blank line in the templates file   *RC*
+    (closes: #66090, #66078, #66083, #66182)
+
+ -- Philip Hands <phil@hands.com>  Mon, 26 Jun 2000 00:45:05 +0100
+
+openssh (1:1.2.3-5) frozen unstable; urgency=low
+
+  * add code to prevent UseLogin exploit, although I think our PAM
+    conditional code breaks UseLogin in a way that protects us from this
+    exploit anyway. ;-)  (closes: #65495)  *RC*
+  * Apply Zack Weinberg <zack@wolery.cumb.org>'s patch to fix keyboard
+    grab vulnerability in ssh-askpass-gnome (closes: #64795) *RC*
+  * stop redirection of sshd's file descriptors (introduced in 1:1.2.3-3)
+    and use db_stop in the postinst to solve that problem instead
+    (closes: #65104)
+  * add Provides: rsh-server to ssh (closes: #63948)
+  * provide config option not to run sshd
+
+ -- Philip Hands <phil@hands.com>  Mon, 12 Jun 2000 23:05:11 +0100
+
+openssh (1:1.2.3-4) frozen unstable; urgency=low
+
+  * fixes #63436 which is *RC*
+  * add 10 second pause in init.d restart (closes: #63844)
+  * get rid of noenv in PAM mail line (closes: #63856)
+  * fix host key path in make-ssh-known-hosts (closes: #63713)
+  * change wording of SUID template (closes: #62788, #63436)
+
+ -- Philip Hands <phil@hands.com>  Sat, 27 May 2000 11:18:06 +0100
+
+openssh (1:1.2.3-3) frozen unstable; urgency=low
+
+  * redirect sshd's file descriptors to /dev/null in init to
+    prevent debconf from locking up during installation 
+    ** grave bug just submited by me **
+
+ -- Philip Hands <phil@hands.com>  Thu, 20 Apr 2000 17:10:59 +0100
+
+openssh (1:1.2.3-2) frozen  unstable; urgency=low
+
+  * allow user to select SUID status of /usr/bin/ssh (closes: 62462) ** RC **
+  * suggest debconf
+  * conflict with debconf{,-tiny} (<<0.2.17) so I can clean up the preinst
+
+ -- Philip Hands <phil@hands.com>  Wed, 19 Apr 2000 17:49:15 +0100
+
+openssh (1:1.2.3-1) frozen unstable; urgency=low
+
+  * New upstream release
+  * patch sshd to create extra xauth key required for localhost
+    (closes: #49944)  *** RC ***
+  * FallbacktoRsh now defaults to ``no'' to match impression
+    given in sshd_config
+  * stop setting suid bit on ssh (closes: #58711, #58558)
+    This breaks Rhosts authentication (which nobody uses) and allows
+    the LD_PRELOAD trick to get socks working, so seems like a net benefit.
+
+ -- Philip Hands <phil@hands.com>  Thu, 13 Apr 2000 20:01:54 +0100
+
+openssh (1:1.2.2-1.4) frozen unstable; urgency=low
+
+  * Recompile for frozen, contains fix for RC bug.
+
+ -- Tommi Virtanen <tv@debian.org>  Tue, 29 Feb 2000 22:14:58 +0200
+
+openssh (1:1.2.2-1.3) unstable; urgency=low
+
+  * Integrated man page addition for PrintLastLog.
+    This bug was filed on "openssh", and I ended up
+    creating my own patch for this (closes: #59054)
+  * Improved error message when ssh_exchange_identification
+    gets EOF (closes: #58904)
+  * Fixed typo (your -> you're) in debian/preinst.
+  * Added else-clauses to config to make this upgradepath possible:
+    oldssh -> openssh preinst fails due to upgrade_to_openssh=false
+    -> ssh-nonfree -> openssh. Without these, debconf remembered
+    the old answer, config didn't force asking it, and preinst always
+    aborted (closes: #56596, #57782)
+  * Moved setting upgrade_to_openssh isdefault flag to the place
+    where preinst would abort. This means no double question to most
+    users, people who currently suffer from "can't upgrade" may need
+    to run apt-get install ssh twice. Did not do the same for 
+    use_old_init_script, as the situation is a bit different, and
+    less common (closes: #54010, #56224)
+  * Check for existance of ssh-keygen before attempting to use it in
+    preinst, added warning for non-existant ssh-keygen in config. This
+    happens when the old ssh is removed (say, due to ssh-nonfree getting
+    installed).
+
+ -- Tommi Virtanen <tv@debian.org>  Sun, 27 Feb 2000 21:36:43 +0200
+
+openssh (1:1.2.2-1.2) frozen unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Added configuration option PrintLastLog, default off due to PAM
+    (closes: #54007, #55042)
+  * ssh-askpass-{gnome,ptk} now provide ssh-askpass, making ssh's
+    Suggests: line more accurate. Also closing related bugs fixed
+    earlier, when default ssh-askpass moved to /usr/bin.
+    (closes: #52403, #54741, #50607, #52298, #50967, #51661)
+  * Patched to call vhangup, with autoconf detection and all
+    (closes: #55379)
+  * Added --with-ipv4-default workaround to a glibc bug causing
+    slow DNS lookups, as per UPGRADING. Use -6 to really use
+    IPv6 addresses. (closes: #57891, #58744, #58713, #57970)
+  * Added noenv to PAM pam_mail line. Thanks to Ben Collins.
+    (closes: #58429)
+  * Added the UPGRADING file to the package.
+  * Added frozen to the changelog line and recompiled before
+    package was installed into the archive.
+
+ -- Tommi Virtanen <tv@debian.org>  Fri, 25 Feb 2000 22:08:57 +0200
+
+openssh (1:1.2.2-1.1) frozen unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Integrated scp pipe buffer patch from Ben Collins
+    <benc@debian.org>, should now work even if reading
+    a pipe gives less than fstat st_blksize bytes. 
+    Should now work on Alpha and Sparc Linux (closes: #53697, #52071)
+  * Made ssh depend on libssl09 (>= 0.9.4-3) (closes: #51393)
+  * Integrated patch from Ben Collins <benc@debian.org>
+    to do full shadow account locking and expiration
+    checking (closes: #58165, #51747)
+
+ -- Tommi Virtanen <tv@debian.org>  Tue, 22 Feb 2000 20:46:12 +0200
+
+openssh (1:1.2.2-1) frozen unstable; urgency=medium
+
+  * New upstream release (closes: #56870, #56346)
+  * built against new libesd (closes: #56805)
+  * add  Colin Watson <cjw44@cam.ac.uk> =NULL patch
+    (closes: #49902, #54894)
+  * use socketpairs as suggested by Andrew Tridgell to eliminate rsync
+    (and other) lockups
+  * patch SSHD_PAM_SERVICE back into auth-pam.c, again :-/
+    (closes: #49902, #55872, #56959)
+  * uncoment the * line in ssh_config (closes: #56444)
+  
+  * #54894 & #49902 are release critical, so this should go in frozen
+
+ -- Philip Hands <phil@hands.com>  Wed,  9 Feb 2000 04:52:04 +0000
+
+openssh (1:1.2.1pre24-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Philip Hands <phil@hands.com>  Fri, 31 Dec 1999 02:47:24 +0000
+
+openssh (1:1.2.1pre23-1) unstable; urgency=low
+
+  * New upstream release
+  * excape ? in /etc/init.d/ssh (closes: #53269)
+
+ -- Philip Hands <phil@hands.com>  Wed, 29 Dec 1999 16:50:46 +0000
+
+openssh (1:1.2pre17-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Philip Hands <phil@hands.com>  Thu,  9 Dec 1999 16:50:40 +0000
+
+openssh (1:1.2pre16-1) unstable; urgency=low
+
+  * New upstream release
+  * upstream release (1.2pre14) (closes: #50299)
+  * make ssh depend on libwrap0 (>= 7.6-1.1) (closes: #50973, #50776)
+  * dispose of grep -q broken pipe message in config script (closes: #50855)
+  * add make-ssh-known-hosts (closes: #50660)
+  * add -i option to ssh-copy-id (closes: #50657)
+  * add check for *LK* in password, indicating a locked account
+
+ -- Philip Hands <phil@hands.com>  Wed,  8 Dec 1999 22:59:38 +0000
+
+openssh (1:1.2pre13-1) unstable; urgency=low
+
+  * New upstream release
+  * make sshd.c use SSHD_PAM_SERVICE and define it as "ssh" in debian/rules
+  * remove duplicate line in /etc/pam.d/ssh (closes: #50310)
+  * mention ssh -A option in ssh.1 & ssh_config
+  * enable forwarding to localhost in default ssh_config (closes: #50373)
+  * tweak preinst to deal with debconf being `unpacked'
+  * use --with-tcp-wrappers (closes: #49545)
+
+ -- Philip Hands <phil@hands.com>  Sat, 20 Nov 1999 14:20:04 +0000
+
+openssh (1:1.2pre11-2) unstable; urgency=low
+
+  * oops, just realised that I forgot to strip out the unpleasant
+    fiddling mentioned below (which turned not to be a fix anyway)
+
+ -- Philip Hands <phil@hands.com>  Mon, 15 Nov 1999 01:35:23 +0000
+
+openssh (1:1.2pre11-1) unstable; urgency=low
+
+  * New upstream release (closes: #49722)
+  * add 2>/dev/null to dispose of spurious message casused by grep -q
+    (closes: #49876, #49604)
+  * fix typo in debian/control (closes: #49841)
+  * Do some unpleasant fiddling with upgraded keys in the preinst, which
+    should make the keylength problem go away.   (closes: #49676)
+  * make pam_start in sshd use ``ssh'' as the service name (closes: #49956)
+  * If /etc/ssh/NOSERVER exist, stop sshd from starting (closes: #47107)
+  * apply Ben Collins <bcollins@debian.org>'s shadow patch
+  * disable lastlogin and motd printing if using pam (closes: #49957)
+  * add ssh-copy-id script and manpage
+
+ -- Philip Hands <phil@hands.com>  Fri, 12 Nov 1999 01:03:38 +0000
+
+openssh (1:1.2pre9-1) unstable; urgency=low
+
+  * New upstream release
+  * apply Chip Salzenberg <chip@valinux.com>'s SO_REUSEADDR patch
+    to channels.c, to make forwarded ports instantly reusable
+  * replace Pre-Depend: debconf with some check code in preinst
+  * make the ssh-add ssh-askpass failure message more helpful
+  * fix the ssh-agent getopts bug (closes: #49426)
+  * fixed typo on Suggests: line (closes: #49704, #49571)
+  * tidy up ssh package description (closes: #49642)
+  * make ssh suid (closes: #49635)
+  * in preinst upgrade code, ensure ssh_host_keys is mode 600 (closes: #49606)
+  * disable agent forwarding by default, for the similar reasons as
+    X forwarding (closes: #49586)
+
+ -- Philip Hands <phil@hands.com>  Tue,  9 Nov 1999 09:57:47 +0000
+
+openssh (1:1.2pre7-4) unstable; urgency=low
+
+  * predepend on debconf (>= 0.2.17) should now allow preinst questions
+
+ -- Philip Hands <phil@hands.com>  Sat,  6 Nov 1999 10:31:06 +0000
+
+openssh (1:1.2pre7-3) unstable; urgency=low
+
+  * add ssh-askpass package using Tommi Virtanen's perl-tk script
+  * add ssh-preconfig package cludge
+  * add usage hints to ssh-agent.1
+
+ -- Philip Hands <phil@hands.com>  Fri,  5 Nov 1999 00:38:33 +0000
+
+openssh (1:1.2pre7-2) unstable; urgency=low
+
+  * use pam patch from Ben Collins <bcollins@debian.org>
+  * add slogin symlink to Makefile.in
+  * change /usr/bin/login to LOGIN_PROGRAM define of /bin/login 
+  * sort out debconf usage
+  * patch from Tommi Virtanen <tv@debian.org>'s makes ssh-add use ssh-askpass
+
+ -- Philip Hands <phil@hands.com>  Thu,  4 Nov 1999 11:08:54 +0000
+
+openssh (1:1.2pre7-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Philip Hands <phil@hands.com>  Tue,  2 Nov 1999 21:02:37 +0000
+
+openssh (1:1.2.0.pre6db1-2) unstable; urgency=low
+
+  * change the binary package name to ssh (the non-free branch of ssh has
+    been renamed to ssh-nonfree)
+  * make pam file comply with Debian standards
+  * use an epoch to make sure openssh supercedes ssh-nonfree
+
+ -- Philip Hands <phil@hands.com>  Sat, 30 Oct 1999 16:26:05 +0100
+
+openssh (1.2pre6db1-1) unstable; urgency=low
+
+  * New upstream source
+  * sshd accepts logins now!
+
+ -- Dan Brosemer <odin@linuxfreak.com>  Fri, 29 Oct 1999 11:13:38 -0500
+
+openssh (1.2.0.19991028-1) unstable; urgency=low
+
+  * New upstream source
+  * Added test for -lnsl to configure script
+
+ -- Dan Brosemer <odin@linuxfreak.com>  Thu, 28 Oct 1999 18:52:09 -0500
+
+openssh (1.2.0.19991027-3) unstable; urgency=low
+
+  * Initial release
+
+ -- Dan Brosemer <odin@linuxfreak.com>  Wed, 27 Oct 1999 19:39:46 -0500
diff --git a/debian/compat b/debian/compat
new file mode 100644
index 000000000..b8626c4cf
--- /dev/null
+++ b/debian/compat
@@ -0,0 +1 @@
+4
diff --git a/debian/control b/debian/control
new file mode 100644
index 000000000..73ef2afac
--- /dev/null
+++ b/debian/control
@@ -0,0 +1,116 @@
+Source: openssh
+Section: net
+Priority: standard
+Maintainer: Matthew Vernon <matthew@debian.org>
+Build-Depends: libwrap0-dev | libwrap-dev, zlib1g-dev | libz-dev, libssl-dev (>= 0.9.8-1), libpam0g-dev | libpam-dev, libgnomeui-dev (>= 2.0.0) | libgnome-dev, libedit-dev, groff, debhelper (>= 5.0.22), sharutils, libselinux1-dev [alpha amd64 arm armeb hppa i386 ia64 m68k mips mipsel powerpc ppc64 s390 sparc], libkrb5-dev
+Standards-Version: 3.6.2
+Uploaders: Colin Watson <cjwatson@debian.org>
+
+Package: openssh-client
+Architecture: any
+Depends: ${shlibs:Depends}, ${debconf-depends}, adduser (>= 3.10), dpkg (>= 1.7.0)
+Conflicts: ssh (<< 1:3.8.1p1-9), sftp, rsh-client (<<0.16.1-1), ssh-krb5
+Replaces: ssh (<< 1:3.8.1p1-9), ssh-krb5
+Suggests: ssh-askpass, xbase-clients
+Provides: rsh-client, ssh-client
+Description: Secure shell client, an rlogin/rsh/rcp replacement
+ This is the portable version of OpenSSH, a free implementation of
+ the Secure Shell protocol as specified by the IETF secsh working
+ group.
+ .
+ Ssh (Secure Shell) is a program for logging into a remote machine
+ and for executing commands on a remote machine.
+ It provides secure encrypted communications between two untrusted
+ hosts over an insecure network.  X11 connections and arbitrary TCP/IP
+ ports can also be forwarded over the secure channel.
+ It is intended as a replacement for rlogin, rsh and rcp, and can be
+ used to provide applications with a secure communication channel.
+ .
+ This package provides the ssh, scp and sftp clients, the ssh-agent
+ and ssh-add programs to make public key authentication more convenient,
+ and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
+ .
+ --------------------------------------------------------------------
+ .
+ In some countries it may be illegal to use any encryption at all
+ without a special permit.
+
+Package: openssh-server
+Priority: optional
+Architecture: any
+Depends: ${shlibs:Depends}, ${debconf-depends}, ${pam-depends}, libpam-modules (>= 0.72-9), adduser (>= 3.9), dpkg (>= 1.9.0), openssh-client (= ${Source-Version})
+Conflicts: ssh (<< 1:3.8.1p1-9), ssh-nonfree (<<2), ssh-socks, ssh2, sftp, rsh-client (<<0.16.1-1), ssh-krb5
+Replaces: ssh (<< 1:3.8.1p1-9), openssh-client (<< 1:3.8.1p1-11), ssh-krb5
+Suggests: ssh-askpass, xbase-clients, rssh
+Provides: ssh-server
+Description: Secure shell server, an rshd replacement
+ This is the portable version of OpenSSH, a free implementation of
+ the Secure Shell protocol as specified by the IETF secsh working
+ group.
+ .
+ Ssh (Secure Shell) is a program for logging into a remote machine
+ and for executing commands on a remote machine.
+ It provides secure encrypted communications between two untrusted
+ hosts over an insecure network.  X11 connections and arbitrary TCP/IP
+ ports can also be forwarded over the secure channel.
+ It is intended as a replacement for rlogin, rsh and rcp, and can be
+ used to provide applications with a secure communication channel.
+ .
+ This package provides the sshd server.
+ .
+ --------------------------------------------------------------------
+ .
+ In some countries it may be illegal to use any encryption at all
+ without a special permit.
+
+Package: ssh
+Priority: extra
+Architecture: all
+Depends: openssh-client, openssh-server
+Description: Secure shell client and server (transitional package)
+ This is a transitional package depending on both the OpenSSH client and
+ the OpenSSH server, which are now in separate packages. You may remove
+ it once the upgrade is complete and nothing depends on it.
+
+Package: ssh-askpass-gnome
+Section: gnome
+Priority: optional
+Architecture: any
+Depends: ${shlibs:Depends}, openssh-client | ssh (>= 1:1.2pre7-4) | ssh-krb5
+Replaces: ssh (<< 1:3.5p1-3)
+Provides: ssh-askpass
+Description: under X, asks user for a passphrase for ssh-add
+ This has been split out of the main ssh package, so that the ssh will
+ not need to depend upon the Gnome libraries.
+ .
+ You probably want the ssh-askpass package instead, but this is
+ provided to add to your choice and/or confusion.
+
+Package: openssh-client-udeb
+XC-Package-Type: udeb
+Section: debian-installer
+Priority: optional
+Architecture: any
+Depends: ${shlibs:Depends}, libnss-files-udeb
+XB-Installer-Menu-Item: 999
+Description: Secure shell client for the Debian installer
+ This is the portable version of OpenSSH, a free implementation of
+ the Secure Shell protocol as specified by the IETF secsh working
+ group.
+ .
+ This package provides the ssh client for use in debian-installer.
+
+Package: openssh-server-udeb
+XC-Package-Type: udeb
+Section: debian-installer
+Priority: optional
+Architecture: any
+Depends: ${shlibs:Depends}, libnss-files-udeb
+Description: Secure shell server for the Debian installer
+ This is the portable version of OpenSSH, a free implementation of
+ the Secure Shell protocol as specified by the IETF secsh working
+ group.
+ .
+ This package provides the sshd server for use in debian-installer.
+ Since it is expected to be used in specialized situations (e.g. S/390
+ installs with no console), it does not provide any configuration.
diff --git a/debian/copyright.head b/debian/copyright.head
new file mode 100644
index 000000000..751f6eb26
--- /dev/null
+++ b/debian/copyright.head
@@ -0,0 +1,52 @@
+This package was debianized by Philip Hands <phil@hands.com> on 31 Oct 1999
+(with help from  Dan Brosemer <odin@linuxfreak.com>)
+
+It was downloaded from here:
+  ftp://ftp.fu-berlin.de/unix/security/openssh/openssh-2.3.0p1.tar.gz
+
+worldwide mirrors are listed here:
+  http://www.openssh.com/ftp.html
+
+The Debian specific parts of the package are mostly taken from the
+original ssh package, which has since been renamed as ssh-nonfree.
+
+The Debian patch is distributed under the terms of the GPL, which you
+can find in /usr/share/common-licenses/GPL.
+
+In addition, as a special exception, Matthew Vernon gives permission
+to link the code of the Debian patch with any version of the OpenSSH
+code which is distributed under a license identical to that listed in
+the included Copyright file, and distribute linked combinations
+including the two.  You must obey the GNU General Public License in
+all respects for all of the code used other than OpenSSH.  If you
+modify this file, you may extend this exception to your version of the
+file, but you are not obligated to do so.  If you do not wish to do
+so, delete this exception statement from your version.
+
+The upstream source for this package is a combination of the ssh
+branch that is being maintained by the OpenBSD team (starting from
+the last version of SSH that was distributed under a free license),
+and porting work by Damien Miller <damien@ibs.com.au> to get it
+working on Linux.  Other people also contributed to this, and are
+credited in /usr/share/doc/ssh/README.
+
+This package contains Kerberos version 5 patches from
+http://www.sxw.org.uk/computing/patches/openssh.html; this is Copyright
+(c) 2001-2004 Simon Wilkinson and provided under the standard 2-term BSD
+licence used elsewhere in OpenSSH.
+
+Copyright:
+
+Code in helper.[ch] is Copyright Internet Business Solutions and is
+released under a X11-style license (see source file for details).
+
+(A)RC4 code in rc4.[ch] is Copyright Damien Miller. It too is under a
+X11-style license (see source file for details).
+
+make-ssh-known-hosts is Copyright Tero Kivinen <Tero.Kivinen@hut.fi>,
+and is distributed under the GPL (see source file for details).
+
+The copyright for the original SSH version follows.  It has been
+modified with [comments] to reflect the changes that the OpenBSD folks
+have made:
+
diff --git a/debian/gnome-ssh-askpass.1 b/debian/gnome-ssh-askpass.1
new file mode 100644
index 000000000..b74c410a8
--- /dev/null
+++ b/debian/gnome-ssh-askpass.1
@@ -0,0 +1,51 @@
+.TH GNOME-SSH-ASKPASS 1
+.SH NAME
+gnome\-ssh\-askpass \- prompts a user for a passphrase using GNOME
+.SH SYNOPSIS
+.B gnome\-ssh\-askpass
+.SH DESCRIPTION
+.B gnome\-ssh\-askpass
+is a GNOME-based passphrase dialog for use with OpenSSH.
+It is intended to be called by the
+.BR ssh\-add (1)
+program and not invoked directly.
+It allows
+.BR ssh\-add (1)
+to obtain a passphrase from a user, even if not connected to a terminal
+(assuming that an X display is available).
+This happens automatically in the case where
+.B ssh\-add
+is invoked from one's
+.B ~/.xsession
+or as one of the GNOME startup programs, for example.
+.PP
+In order to be called automatically by
+.BR ssh\-add ,
+.B gnome\-ssh\-askpass
+should be installed as
+.IR /usr/bin/ssh\-askpass .
+.SH "ENVIRONMENT VARIABLES"
+The following environment variables are recognized:
+.TP
+.I GNOME_SSH_ASKPASS_GRAB_SERVER
+Causes
+.B gnome\-ssh\-askpass
+to grab the X server before asking for a passphrase.
+.TP
+.I GNOME_SSH_ASKPASS_GRAB_POINTER
+Causes
+.B gnome\-ssh\-askpass
+to grab the mouse pointer using
+.IR gdk_pointer_grab ()
+before asking for a passphrase.
+.PP
+Regardless of whether either of these environment variables is set,
+.B gnome\-ssh\-askpass
+will grab the keyboard using
+.IR gdk_keyboard_grab ().
+.SH AUTHOR
+This manual page was written by Colin Watson <cjwatson@debian.org>
+for the Debian system (but may be used by others).
+It was based on that for
+.B x11\-ssh\-askpass
+by Philip Hands.
diff --git a/debian/moduli.5 b/debian/moduli.5
new file mode 100644
index 000000000..b3997658b
--- /dev/null
+++ b/debian/moduli.5
@@ -0,0 +1,152 @@
+.\" $OpenBSD: moduli.5,v 1.7 2003/03/06 20:48:35 jmc Exp $
+.\"
+.\" Copyright 1997, 2000 William Allen Simpson <wsimpson@greendragon.com>
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\"    must display the following acknowledgement:
+.\"      This product includes software designed by William Allen Simpson.
+.\" 4. The name of the author may not be used to endorse or promote products
+.\"    derived from this software without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+.\"
+.\" Manual page, using -mandoc macros
+.\"
+.Dd July 28, 1997
+.Dt MODULI 5
+.Os
+.Sh NAME
+.Nm moduli
+.Nd system moduli file
+.Sh DESCRIPTION
+The
+.Pa /etc/ssh/moduli
+file contains the system-wide Diffie-Hellman prime moduli for
+.Xr sshd 8 .
+.Pp
+Each line in this file contains the following fields:
+Time, Type, Tests, Tries, Size, Generator, Modulus.
+The fields are separated by white space (tab or blank).
+.Pp
+.Fa Time : yyyymmddhhmmss .
+Specifies the system time that the line was appended to the file.
+The value 00000000000000 means unknown (historic).
+.\"The file is sorted in ascending order.
+.Pp
+.Fa Type : decimal .
+Specifies the internal structure of the prime modulus.
+.Pp
+.Bl -tag -width indent -offset indent -compact
+.It 0 :
+unknown;
+often learned from peer during protocol operation,
+and saved for later analysis.
+.It 1 :
+unstructured;
+a common large number.
+.It 2 :
+safe (p = 2q + 1);
+meets basic structural requirements.
+.It 3 :
+Schnorr.
+.It 4 :
+Sophie-Germaine (q = (p-1)/2);
+usually generated in the process of testing safe or strong primes.
+.It 5 :
+strong;
+useful for RSA public key generation.
+.El
+.Pp
+.Fa Tests : decimal (bit field) .
+Specifies the methods used in checking for primality.
+Usually, more than one test is used.
+.Pp
+.Bl -tag -width indent -offset indent -compact
+.It 0 :
+not tested;
+often learned from peer during protocol operation,
+and saved for later analysis.
+.It 1 :
+composite;
+failed one or more tests.
+In this case, the highest bit specifies the test that failed.
+.It 2 :
+sieve;
+checked for division by a range of smaller primes.
+.It 4 :
+Miller-Rabin.
+.It 8 :
+Jacobi.
+.It 16 :
+Elliptic Curve.
+.El
+.Pp
+.Fa Tries : decimal .
+Depends on the value of the highest valid Test bit,
+where the method specified is:
+.Pp
+.Bl -tag -width indent -offset indent -compact
+.It 0 :
+not tested
+(always zero).
+.It 1 :
+composite
+(irrelevant).
+.It 2 :
+sieve;
+number of primes sieved.
+Commonly on the order of 32,000,000.
+.It 4 :
+Miller-Rabin;
+number of M-R iterations.
+Commonly on the order of 32 to 64.
+.It 8 :
+Jacobi;
+unknown
+(always zero).
+.It 16 :
+Elliptic Curve;
+unused
+(always zero).
+.El
+.Pp
+.Fa Size : decimal .
+Specifies the number of significant bits.
+.Pp
+.Fa Generator : hex string .
+Specifies the best generator for a Diffie-Hellman exchange.
+0 = unknown or variable,
+2, 3, 5, etc.
+.Pp
+.Fa Modulus : hex string .
+The prime modulus.
+.Pp
+The file is searched for moduli that meet the appropriate
+Time, Size and Generator criteria.
+When more than one meet the criteria,
+the selection should be weighted toward newer moduli,
+without completely disqualifying older moduli.
+.Sh FILES
+.Bl -tag -width /etc/ssh/moduli -compact
+.It Pa /etc/ssh/moduli
+.El
+.Sh SEE ALSO
+.Xr sshd 8
diff --git a/debian/openssh-client-udeb.dirs b/debian/openssh-client-udeb.dirs
new file mode 100644
index 000000000..e77248175
--- /dev/null
+++ b/debian/openssh-client-udeb.dirs
@@ -0,0 +1 @@
+usr/bin
diff --git a/debian/openssh-client-udeb.isinstallable b/debian/openssh-client-udeb.isinstallable
new file mode 100644
index 000000000..7591b6245
--- /dev/null
+++ b/debian/openssh-client-udeb.isinstallable
@@ -0,0 +1,10 @@
+#! /bin/sh
+
+# This is a hack to arrange for openssh-client-udeb to show up as a
+# retrievable debian-installer component in expert mode (due to the
+# Installer-Menu-Item: control field) while not actually appearing on the
+# d-i main menu. See:
+#
+#   http://lists.debian.org/debian-boot/2004/07/msg01207.html
+
+exit 1
diff --git a/debian/openssh-client.config b/debian/openssh-client.config
new file mode 100644
index 000000000..736e464ed
--- /dev/null
+++ b/debian/openssh-client.config
@@ -0,0 +1,26 @@
+#!/bin/sh
+
+action=$1
+version=$2
+
+# Source debconf library.
+. /usr/share/debconf/confmodule
+db_version 2.0
+
+if [ -d /etc/ssh-nonfree ] && [ ! -d /etc/ssh ]; then
+  version=1.2.27
+  cp -a /etc/ssh-nonfree /etc/ssh
+fi
+
+# Was ssh-keysign's setuid bit turned off using the obsolete debconf
+# question? If so, turn this into a statoverride. (Ugh.)
+if dpkg --compare-versions "$2" lt 1:4.1p1-2 && \
+    db_get ssh/SUID_client && [ "$RET" = false ] &&
+    [ -x /usr/sbin/dpkg-statoverride ] && \
+    ! dpkg-statoverride --list /usr/lib/ssh-keysign && \
+    ! dpkg-statoverride --list /usr/lib/openssh/ssh-keysign; then
+        dpkg-statoverride --update --add root root 0755 \
+                /usr/lib/openssh/ssh-keysign
+fi
+
+exit 0
diff --git a/debian/openssh-client.dirs b/debian/openssh-client.dirs
new file mode 100644
index 000000000..1da8fba83
--- /dev/null
+++ b/debian/openssh-client.dirs
@@ -0,0 +1 @@
+usr/share/lintian/overrides
diff --git a/debian/openssh-client.lintian b/debian/openssh-client.lintian
new file mode 100644
index 000000000..8c4bd1751
--- /dev/null
+++ b/debian/openssh-client.lintian
@@ -0,0 +1,2 @@
+openssh-client: setuid-binary usr/lib/openssh/ssh-keysign 4755 root/root
+openssh-client: no-debconf-templates
diff --git a/debian/openssh-client.postinst b/debian/openssh-client.postinst
new file mode 100644
index 000000000..466801057
--- /dev/null
+++ b/debian/openssh-client.postinst
@@ -0,0 +1,106 @@
+#!/bin/sh -e
+
+action="$1"
+oldversion="$2"
+
+. /usr/share/debconf/confmodule
+db_version 2.0
+
+umask 022
+
+if [ "$action" != configure ]
+  then
+  exit 0
+fi
+
+
+fix_rsh_diversion() {
+# get rid of mistaken rsh diversion (circa 1.2.27-1)
+
+        if [ -L /usr/bin/rsh ] &&
+                dpkg-divert --list '/usr/bin/rsh.real/rsh' | grep -q ' ssh$' ; then
+                for cmd in rlogin  rsh rcp ; do
+                        [ -L /usr/bin/$cmd ] && rm /usr/bin/$cmd
+                        dpkg-divert --package ssh --remove --rename \
+                                --divert /usr/bin/rsh.real/$cmd /usr/bin/$cmd
+
+                        [ -L /usr/man/man1/$cmd.1.gz ] && rm /usr/man/man1/$$cmd.1.gz
+                        dpkg-divert --package ssh --remove --rename \
+                                --divert /usr/man/man1/$cmd.real.1.gz /usr/man/man1/$cmd.1.gz
+                done
+
+                rmdir /usr/bin/rsh.real
+        fi
+}
+
+create_alternatives() {
+# Create alternatives for the various r* tools.
+# Make sure we don't change existing alternatives that a user might have
+# changed, but clean up after some old alternatives that mistakenly pointed
+# rlogin and rcp to ssh.
+        update-alternatives --quiet --remove rlogin /usr/bin/ssh
+        update-alternatives --quiet --remove rcp /usr/bin/ssh
+        for cmd in rsh rlogin rcp; do
+                scmd="s${cmd#r}"
+                if ! update-alternatives --display "$cmd" | \
+                                grep -q "$scmd"; then
+                        update-alternatives --quiet --install "/usr/bin/$cmd" "$cmd" "/usr/bin/$scmd" 20 \
+                                --slave "/usr/share/man/man1/$cmd.1.gz" "$cmd.1.gz" "/usr/share/man/man1/$scmd.1.gz"
+                fi
+        done
+}
+
+set_ssh_permissions() {
+        if dpkg --compare-versions "$oldversion" lt-nl 1:3.4p1-1 ; then
+            if [ -x /usr/sbin/dpkg-statoverride ] ; then
+                if dpkg-statoverride --list /usr/bin/ssh >/dev/null; then
+                    dpkg-statoverride --remove /usr/bin/ssh >/dev/null
+                fi 
+            fi
+        fi
+
+        # libexecdir changed, so migrate old statoverrides.
+        if [ -x /usr/sbin/dpkg-statoverride ] &&
+            override="$(dpkg-statoverride --list /usr/lib/ssh-keysign)"; then
+                override_user="${override%% *}"
+                override="${override#* }"
+                override_group="${override%% *}"
+                override="${override#* }"
+                override_mode="${override%% *}"
+                if dpkg-statoverride --update --add \
+                    "$override_user" "$override_group" "$override_mode" \
+                    /usr/lib/openssh/ssh-keysign; then
+                        dpkg-statoverride --remove /usr/lib/ssh-keysign || true
+                fi
+        fi
+}
+
+fix_ssh_group() {
+        # Try to remove non-system group mistakenly created by 1:3.5p1-1.
+        # set_ssh_agent_permissions() below will re-create it properly.
+        if getent group ssh >/dev/null; then
+                delgroup --quiet ssh || true
+        fi
+}
+
+set_ssh_agent_permissions() {
+        if ! getent group ssh >/dev/null; then
+                addgroup --system --quiet ssh
+        fi
+        if ! [ -x /usr/sbin/dpkg-statoverride ] || \
+            ! dpkg-statoverride --list /usr/bin/ssh-agent >/dev/null ; then
+                chgrp ssh /usr/bin/ssh-agent
+                chmod 2755 /usr/bin/ssh-agent
+        fi
+}
+
+
+fix_rsh_diversion
+create_alternatives
+set_ssh_permissions
+if [ "$2" = "1:3.5p1-1" ]; then
+    fix_ssh_group
+fi
+set_ssh_agent_permissions
+
+exit 0
diff --git a/debian/openssh-client.postrm b/debian/openssh-client.postrm
new file mode 100644
index 000000000..139fb4d12
--- /dev/null
+++ b/debian/openssh-client.postrm
@@ -0,0 +1,20 @@
+#!/bin/sh -e
+
+#DEBHELPER#
+
+if [ "$1" = "purge" ]
+then
+    # Remove all non-conffiles that ssh might create, so that we can
+    # smoothly remove /etc/ssh if and only if the user hasn't dropped some
+    # other files in there. Conffiles have already been removed at this
+    # point.
+    rm -f /etc/ssh/moduli /etc/ssh/primes
+    rm -f /etc/ssh/ssh_known_hosts /etc/ssh/ssh_known_hosts2
+    rmdir --ignore-fail-on-non-empty /etc/ssh
+fi
+
+if [ "$1" = "purge" ] ; then
+        delgroup --quiet ssh > /dev/null || true
+fi
+
+exit 0
diff --git a/debian/openssh-client.prerm b/debian/openssh-client.prerm
new file mode 100644
index 000000000..2d631cb9c
--- /dev/null
+++ b/debian/openssh-client.prerm
@@ -0,0 +1,39 @@
+#! /bin/sh
+# prerm script for ssh
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <prerm> `remove'
+#        * <old-prerm> `upgrade' <new-version>
+#        * <new-prerm> `failed-upgrade' <old-version>
+#        * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
+#        * <deconfigured's-prerm> `deconfigure' `in-favour'
+#          <package-being-installed> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see /usr/share/doc/packaging-manual/
+
+case "$1" in
+    remove|deconfigure)
+        update-alternatives --quiet --remove rsh /usr/bin/ssh
+        update-alternatives --quiet --remove rlogin /usr/bin/slogin
+        update-alternatives --quiet --remove rcp /usr/bin/scp
+        ;;
+    upgrade)
+        ;;
+    failed-upgrade)
+        ;;
+    *)
+        echo "prerm called with unknown argument \`$1'" >&2
+        exit 0
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
diff --git a/debian/openssh-server-udeb.dirs b/debian/openssh-server-udeb.dirs
new file mode 100644
index 000000000..f2b0bd9da
--- /dev/null
+++ b/debian/openssh-server-udeb.dirs
@@ -0,0 +1,3 @@
+usr/bin
+usr/sbin
+var/run/sshd
diff --git a/debian/openssh-server.config b/debian/openssh-server.config
new file mode 100644
index 000000000..8bc23020d
--- /dev/null
+++ b/debian/openssh-server.config
@@ -0,0 +1,84 @@
+#!/bin/sh 
+
+action=$1
+version=$2
+
+# Source debconf library.
+. /usr/share/debconf/confmodule
+db_version 2.0
+
+
+get_config_option() {
+        option="$1"
+
+        [ -f /etc/ssh/sshd_config ] || return
+
+        # TODO: actually only one '=' allowed after option
+        perl -ne 'print if s/^[[:space:]]*'"$option"'[[:space:]=]+//i' \
+           /etc/ssh/sshd_config 2>/dev/null
+}
+
+
+if [ -e /etc/init.d/ssh ] && ! grep -q pidfile /etc/init.d/ssh
+then
+  db_fset ssh/use_old_init_script seen false
+  db_input medium ssh/use_old_init_script || true
+  db_go
+
+  db_get ssh/use_old_init_script
+  [ "$RET" = "false" ] && exit 0
+else
+  db_set ssh/use_old_init_script true
+  db_fset ssh/use_old_init_script seen true
+fi
+
+if [ -e /etc/ssh/sshd_config ]
+then
+    if dpkg --compare-versions "$version" lt-nl 1:1.3 ; 
+    then db_input medium ssh/new_config || true
+        db_go
+    fi
+
+    # An empty version means we're upgrading from before the package split,
+    # so check.
+    if dpkg --compare-versions "$version" lt 1:3.8.1p1-11
+    then
+        passwordauth="$(get_config_option PasswordAuthentication)"
+        crauth="$(get_config_option ChallengeResponseAuthentication)"
+        if [ "$passwordauth" = no ] && \
+           ([ -z "$crauth" ] || [ "$crauth" = yes ])
+        then
+            db_input critical ssh/disable_cr_auth || true
+        fi
+    fi
+fi 
+
+if [ -x /usr/sbin/in.telnetd ] && grep -q "^telnet\b" /etc/inetd.conf
+then
+  if ! /usr/sbin/in.telnetd -? 2>&1 | grep -q ssl 2>/dev/null
+  then 
+    db_input low ssh/insecure_telnetd || true
+  fi
+fi
+
+key=/etc/ssh/ssh_host_key
+export key
+if [ -n "$version" ] && [ -f $key ] && [ ! -x /usr/bin/ssh-keygen ] &&
+     dpkg --compare-versions "$version" lt 1.2.28
+then
+  # make sure that keys get updated to get rid of IDEA; preinst
+  # actually does the work, but if the old ssh-keygen is not found,
+  # it can't do that -- thus, we tell the user that he must create
+  # a new host key.
+  echo -en '\0\0' | 3<&0 sh -c \
+      'dd if=$key bs=1 skip=32 count=2 2>/dev/null | cmp -s - /dev/fd/3' || {
+    # this means that bytes 32&33 of the key were not both zero, in which
+    # case the key is encrypted, which we need to fix
+    db_input high ssh/encrypted_host_key_but_no_keygen || true
+  }
+fi
+
+
+db_go
+
+exit 0
diff --git a/debian/openssh-server.default b/debian/openssh-server.default
new file mode 100644
index 000000000..304042224
--- /dev/null
+++ b/debian/openssh-server.default
@@ -0,0 +1,5 @@
+# Default settings for openssh-server. This file is sourced by /bin/sh from
+# /etc/init.d/ssh.
+
+# Options to pass to sshd
+SSHD_OPTS=
diff --git a/debian/openssh-server.dirs b/debian/openssh-server.dirs
new file mode 100644
index 000000000..b28faf929
--- /dev/null
+++ b/debian/openssh-server.dirs
@@ -0,0 +1,7 @@
+etc/init.d
+etc/default
+usr/lib/openssh
+usr/sbin
+usr/share/man/man5
+usr/share/man/man8
+var/run/sshd
diff --git a/debian/openssh-server.init b/debian/openssh-server.init
new file mode 100644
index 000000000..552330422
--- /dev/null
+++ b/debian/openssh-server.init
@@ -0,0 +1,74 @@
+#! /bin/sh
+set -e
+
+# /etc/init.d/ssh: start and stop the OpenBSD "secure shell(tm)" daemon
+
+test -x /usr/sbin/sshd || exit 0
+( /usr/sbin/sshd -\? 2>&1 | grep -q OpenSSH ) 2>/dev/null || exit 0
+
+if test -f /etc/default/ssh; then
+    . /etc/default/ssh
+fi
+
+check_for_no_start() {
+    # forget it if we're trying to start, and /etc/ssh/sshd_not_to_be_run exists
+    if [ -e /etc/ssh/sshd_not_to_be_run ]; then 
+        echo "OpenBSD Secure Shell server not in use (/etc/ssh/sshd_not_to_be_run)"
+        exit 0
+    fi
+}
+
+check_privsep_dir() {
+    # Create the PrivSep empty dir if necessary
+    if [ ! -d /var/run/sshd ]; then
+        mkdir /var/run/sshd
+        chmod 0755 /var/run/sshd
+    fi
+}
+
+check_config() {
+    if [ ! -e /etc/ssh/sshd_not_to_be_run ]; then
+        /usr/sbin/sshd -t || exit 1
+    fi
+}
+
+export PATH="${PATH:+$PATH:}/usr/sbin:/sbin"
+
+case "$1" in
+  start)
+        check_for_no_start
+        check_privsep_dir
+        echo -n "Starting OpenBSD Secure Shell server: sshd"
+        start-stop-daemon --start --quiet --pidfile /var/run/sshd.pid --exec /usr/sbin/sshd -- $SSHD_OPTS
+        echo "."
+        ;;
+  stop)
+        echo -n "Stopping OpenBSD Secure Shell server: sshd"
+        start-stop-daemon --stop --quiet --oknodo --pidfile /var/run/sshd.pid
+        echo "."
+        ;;
+
+  reload|force-reload)
+        check_for_no_start
+        check_config
+        echo -n "Reloading OpenBSD Secure Shell server's configuration"
+        start-stop-daemon --stop --signal 1 --quiet --oknodo --pidfile /var/run/sshd.pid --exec /usr/sbin/sshd
+        echo "."
+        ;;
+
+  restart)
+        check_config
+        echo -n "Restarting OpenBSD Secure Shell server: sshd"
+        start-stop-daemon --stop --quiet --oknodo --retry 30 --pidfile /var/run/sshd.pid
+        check_for_no_start
+        check_privsep_dir
+        start-stop-daemon --start --quiet --pidfile /var/run/sshd.pid --exec /usr/sbin/sshd -- $SSHD_OPTS
+        echo "."
+        ;;
+
+  *)
+        echo "Usage: /etc/init.d/ssh {start|stop|reload|force-reload|restart}"
+        exit 1
+esac
+
+exit 0
diff --git a/debian/openssh-server.links b/debian/openssh-server.links
new file mode 100644
index 000000000..d9bb08420
--- /dev/null
+++ b/debian/openssh-server.links
@@ -0,0 +1,2 @@
+usr/lib/openssh/sftp-server usr/lib/sftp-server
+usr/share/doc/openssh-client usr/share/doc/openssh-server
diff --git a/debian/openssh-server.postinst b/debian/openssh-server.postinst
new file mode 100644
index 000000000..ccacb411a
--- /dev/null
+++ b/debian/openssh-server.postinst
@@ -0,0 +1,330 @@
+#!/bin/sh -e
+
+action="$1"
+oldversion="$2"
+
+. /usr/share/debconf/confmodule
+db_version 2.0
+
+umask 022
+
+if [ "$action" != configure ]
+  then
+  exit 0
+fi
+
+
+fix_doc_symlink() {
+        if [ ! -L /usr/share/doc/openssh-server ] && \
+           dpkg --compare-versions "$oldversion" lt-nl 1:4.1p1-5; then
+                rm -rf /usr/share/doc/openssh-server
+                ln -s openssh-client /usr/share/doc/openssh-server
+        fi
+}
+
+check_idea_key() {
+        # check for old host_key files using IDEA, which openssh does not
+        # support
+        if [ -f /etc/ssh/ssh_host_key ] ; then
+                cp -a /etc/ssh/ssh_host_key /etc/ssh/ssh_host_key.check_idea
+                if ssh-keygen -p -N '' -f /etc/ssh/ssh_host_key.check_idea 2>&1 | \
+                                grep -q 'unknown cipher' 2>/dev/null; then
+                        mv /etc/ssh/ssh_host_key /etc/ssh/ssh_host_key.old
+                        mv /etc/ssh/ssh_host_key.pub /etc/ssh/ssh_host_key.pub.old
+                fi
+                rm -f /etc/ssh/ssh_host_key.check_idea
+        fi
+}
+
+
+get_config_option() {
+        option="$1"
+
+        [ -f /etc/ssh/sshd_config ] || return
+
+        # TODO: actually only one '=' allowed after option
+        perl -lne 's/\s+/ /g; print if s/^\s*'"$option"'[[:space:]=]+//i' \
+           /etc/ssh/sshd_config
+}
+
+
+set_config_option() {
+        option="$1"
+        value="$2"
+
+        perl -le '
+                $option = $ARGV[0]; $value = $ARGV[1]; $done = 0;
+                while (<STDIN>) {
+                        chomp;
+                        (my $match = $_) =~ s/\s+/ /g;
+                        if ($match =~ s/^\s*\Q$option\E\s+.*/$option $value/) {
+                                $_ = $match;
+                                $done = 1;
+                        }
+                        print;
+                }
+                print "$option $value" unless $done;' \
+                "$option" "$value" \
+                < /etc/ssh/sshd_config > /etc/ssh/sshd_config.dpkg-new
+        chown --reference /etc/ssh/sshd_config /etc/ssh/sshd_config.dpkg-new
+        chmod --reference /etc/ssh/sshd_config /etc/ssh/sshd_config.dpkg-new
+        mv /etc/ssh/sshd_config.dpkg-new /etc/ssh/sshd_config
+}
+
+
+host_keys_required() {
+        hostkeys="$(get_config_option HostKey)"
+        if [ "$hostkeys" ]; then
+                echo "$hostkeys"
+        else
+                # No HostKey directives at all, so the server picks some
+                # defaults depending on the setting of Protocol.
+                protocol="$(get_config_option Protocol)"
+                [ "$protocol" ] || protocol=1,2
+                if echo "$protocol" | grep 1 >/dev/null; then
+                        echo /etc/ssh/ssh_host_key
+                fi
+                if echo "$protocol" | grep 2 >/dev/null; then
+                        echo /etc/ssh/ssh_host_rsa_key
+                        echo /etc/ssh/ssh_host_dsa_key
+                fi
+        fi
+}
+
+
+create_key() {
+        msg="$1"
+        shift
+        hostkeys="$1"
+        shift
+        file="$1"
+        shift
+
+        if echo "$hostkeys" | grep -x "$file" >/dev/null && \
+           [ ! -f "$file" ] ; then
+                echo -n $msg
+                ssh-keygen -q -f "$file" -N '' "$@"
+                echo
+                if type restorecon >/dev/null 2>&1; then
+                        restorecon "$file.pub"
+                fi
+        fi
+}
+
+
+create_keys() {
+        hostkeys="$(host_keys_required)"
+
+        create_key "Creating SSH1 key; this may take some time ..." \
+                "$hostkeys" /etc/ssh/ssh_host_key -t rsa1
+
+        create_key "Creating SSH2 RSA key; this may take some time ..." \
+                "$hostkeys" /etc/ssh/ssh_host_rsa_key -t rsa
+        create_key "Creating SSH2 DSA key; this may take some time ..." \
+                "$hostkeys" /etc/ssh/ssh_host_dsa_key -t dsa
+}
+
+
+check_password_auth() {
+        passwordauth="$(get_config_option PasswordAuthentication)"
+        crauth="$(get_config_option ChallengeResponseAuthentication)"
+        if [ "$passwordauth" = no ] && \
+           ([ -z "$crauth" ] || [ "$crauth" = yes ]); then
+                db_get ssh/disable_cr_auth
+                if [ "$RET" = true ]; then
+                        set_config_option ChallengeResponseAuthentication no
+                fi
+        fi
+}
+
+
+move_subsystem_sftp() {
+        subsystem_sftp="$(get_config_option 'Subsystem sftp')"
+        if [ "$subsystem_sftp" = /usr/lib/sftp-server ] || \
+           [ "$subsystem_sftp" = /usr/libexec/sftp-server ]; then
+                set_config_option 'Subsystem sftp' /usr/lib/openssh/sftp-server
+        fi
+}
+
+
+create_sshdconfig() {
+        if [ -e /etc/ssh/sshd_config ] ; then
+            if dpkg --compare-versions "$oldversion" lt-nl 1:1.3 ; then
+                db_get ssh/new_config
+                if [ "$RET" = "false" ] ; then return 0; fi
+            else
+                # Upgrade sshd configuration from a sane version.
+
+                if (dpkg --compare-versions "$oldversion" lt-nl 1:3.8p1-1 && \
+                    ! grep -iq ^UsePAM /etc/ssh/sshd_config) || \
+                   grep -Eiq '^(PAMAuthenticationViaKbdInt|RhostsAuthentication)' \
+                     /etc/ssh/sshd_config ; then
+                    # Upgrade from pre-3.7: UsePAM needed to maintain standard
+                    # Debian configuration.
+                    # Note that --compare-versions is sadly not reliable enough
+                    # here due to the package split of ssh into openssh-client
+                    # and openssh-server. The extra grep for some deprecated
+                    # options should with any luck be a good enough heuristic.
+                    echo -n 'Upgrading sshd_config (old version in .dpkg-old) ...'
+                    cp -a /etc/ssh/sshd_config /etc/ssh/sshd_config.dpkg-old
+                    perl -pe 's/^(PAMAuthenticationViaKbdInt|RhostsAuthentication)\b/#$1/i' \
+                        /etc/ssh/sshd_config > /etc/ssh/sshd_config.dpkg-new
+                    echo >> /etc/ssh/sshd_config.dpkg-new
+                    echo 'UsePAM yes' >> /etc/ssh/sshd_config.dpkg-new
+                    chown --reference /etc/ssh/sshd_config \
+                                      /etc/ssh/sshd_config.dpkg-new
+                    chmod --reference /etc/ssh/sshd_config \
+                                      /etc/ssh/sshd_config.dpkg-new
+                    mv /etc/ssh/sshd_config.dpkg-new /etc/ssh/sshd_config
+                    echo
+                fi
+
+                # An empty version means we're upgrading from before the
+                # package split, so check.
+                if dpkg --compare-versions "$oldversion" lt 1:3.8.1p1-11; then
+                    check_password_auth
+                fi
+
+                # libexecdir changed, so fix up 'Subsystem sftp'.
+                if dpkg --compare-versions "$oldversion" lt 1:4.1p1-1; then
+                    move_subsystem_sftp
+                fi
+
+                return 0
+            fi
+        fi
+
+        #Preserve old sshd_config before generating a new one
+        if [ -e /etc/ssh/sshd_config ] ; then 
+            mv /etc/ssh/sshd_config /etc/ssh/sshd_config.dpkg-old
+        fi
+
+        cat <<EOF > /etc/ssh/sshd_config
+# Package generated configuration file
+# See the sshd(8) manpage for details
+
+# What ports, IPs and protocols we listen for
+Port 22
+# Use these options to restrict which interfaces/protocols sshd will bind to
+#ListenAddress ::
+#ListenAddress 0.0.0.0
+Protocol 2
+# HostKeys for protocol version 2
+HostKey /etc/ssh/ssh_host_rsa_key
+HostKey /etc/ssh/ssh_host_dsa_key
+#Privilege Separation is turned on for security
+UsePrivilegeSeparation yes
+
+# Lifetime and size of ephemeral version 1 server key
+KeyRegenerationInterval 3600
+ServerKeyBits 768
+
+# Logging
+SyslogFacility AUTH
+LogLevel INFO
+
+# Authentication:
+LoginGraceTime 120
+PermitRootLogin yes
+StrictModes yes
+
+RSAAuthentication yes
+PubkeyAuthentication yes
+#AuthorizedKeysFile     %h/.ssh/authorized_keys
+
+# Don't read the user's ~/.rhosts and ~/.shosts files
+IgnoreRhosts yes
+# For this to work you will also need host keys in /etc/ssh_known_hosts
+RhostsRSAAuthentication no
+# similar for protocol version 2
+HostbasedAuthentication no
+# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
+#IgnoreUserKnownHosts yes
+
+# To enable empty passwords, change to yes (NOT RECOMMENDED)
+PermitEmptyPasswords no
+
+# Change to yes to enable challenge-response passwords (beware issues with
+# some PAM modules and threads)
+ChallengeResponseAuthentication no
+
+# Change to no to disable tunnelled clear text passwords
+#PasswordAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosGetAFSToken no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+X11Forwarding yes
+X11DisplayOffset 10
+PrintMotd no
+PrintLastLog yes
+TCPKeepAlive yes
+#UseLogin no
+
+#MaxStartups 10:30:60
+#Banner /etc/issue.net
+
+# Allow client to pass locale environment variables
+AcceptEnv LANG LC_*
+
+Subsystem sftp /usr/lib/openssh/sftp-server
+
+UsePAM yes
+EOF
+}
+
+fix_statoverride() {
+# Remove an erronous override for sshd (we should have overridden ssh)
+        if [ -x /usr/sbin/dpkg-statoverride ]; then
+                if dpkg-statoverride --list /usr/sbin/sshd >/dev/null ; then
+                        dpkg-statoverride --remove /usr/sbin/sshd
+                fi
+        fi
+}
+
+setup_sshd_user() {
+        if ! getent passwd sshd >/dev/null; then
+                adduser --quiet --system --no-create-home --home /var/run/sshd sshd
+        fi
+}
+
+fix_conffile_permissions() {
+        # Clean up after executable /etc/default/ssh in 1:3.5p1-5. dpkg
+        # doesn't do this for us; see bug #192981.
+        chmod 644 /etc/default/ssh
+}
+
+setup_init() {
+        if [ -x /etc/init.d/ssh ]; then
+                update-rc.d ssh defaults >/dev/null
+                if [ -x /usr/sbin/invoke-rc.d ]; then
+                        invoke-rc.d ssh restart
+                else
+                        /etc/init.d/ssh restart
+                fi
+        fi
+}
+
+
+fix_doc_symlink
+create_sshdconfig
+check_idea_key
+create_keys
+fix_statoverride
+setup_sshd_user
+if dpkg --compare-versions "$2" lt 1:3.6.1p2-2; then
+    fix_conffile_permissions
+fi
+setup_init
+
+
+db_stop
+
+exit 0
diff --git a/debian/openssh-server.postrm b/debian/openssh-server.postrm
new file mode 100644
index 000000000..e7a437260
--- /dev/null
+++ b/debian/openssh-server.postrm
@@ -0,0 +1,27 @@
+#!/bin/sh -e
+
+#DEBHELPER#
+
+if [ "$1" = "purge" ]
+then
+    # Remove all non-conffiles that ssh might create, so that we can
+    # smoothly remove /etc/ssh if and only if the user hasn't dropped some
+    # other files in there. Conffiles have already been removed at this
+    # point.
+    rm -f /etc/ssh/ssh_host_key /etc/ssh/ssh_host_key.pub
+    rm -f /etc/ssh/ssh_host_rsa_key /etc/ssh/ssh_host_rsa_key.pub
+    rm -f /etc/ssh/ssh_host_dsa_key /etc/ssh/ssh_host_dsa_key.pub
+    rm -f /etc/ssh/sshd_config
+    rm -f /etc/ssh/sshd_not_to_be_run
+    rmdir --ignore-fail-on-non-empty /etc/ssh
+fi
+
+if [ "$1" = "purge" ] ; then
+    update-rc.d ssh remove >/dev/null
+fi
+
+if [ "$1" = "purge" ] ; then
+        deluser --quiet sshd > /dev/null || true
+fi
+
+exit 0
diff --git a/debian/openssh-server.preinst b/debian/openssh-server.preinst
new file mode 100644
index 000000000..412e51564
--- /dev/null
+++ b/debian/openssh-server.preinst
@@ -0,0 +1,82 @@
+#!/bin/sh -e
+
+action=$1
+version=$2
+
+if [ -d /etc/ssh-nonfree ] && [ ! -d /etc/ssh ]; then
+  version=1.2.27
+fi
+
+if [ "$action" = upgrade ] || [ "$action" = install ]
+then
+  # check if debconf is missing
+  if ! test -f /usr/share/debconf/confmodule
+  then
+    cat <<EOF
+
+WARNING: ssh's pre-configuration script relies on debconf to tell you
+about some problems that might prevent you from logging in if you are
+upgrading from the old, Non-free version of ssh.
+
+If this is a new installation, you don't need to worry about this.
+Just go ahead and install ssh (make sure to read .../ssh/README.Debian).
+
+If you are upgrading, but you have alternative ways of logging into
+the machine (i.e. you're sitting in front of it, or you have telnetd
+running), then you also don't need to worry too much, because you can
+fix it up afterwards if there's a problem.
+
+If you're upgrading from an older (non-free) version of ssh, and ssh
+is the only way you have to access this machine, then you should
+probably abort the installation of ssh, install debconf, and then
+retry the installation of ssh.
+
+EOF
+    echo -n "Do you want to install SSH anyway [yN]: "
+    read input
+    expr "$input" : '[Yy]' >/dev/null || exit 1
+
+    # work around for missing debconf
+    db_get() { : ; }
+    RET=true
+    if [ -d /etc/ssh-nonfree ] && [ ! -d /etc/ssh ]; then
+      cp -a /etc/ssh-nonfree /etc/ssh
+    fi
+  else
+    # Source debconf library.
+    . /usr/share/debconf/confmodule
+    db_version 2.0
+  fi
+
+  db_get ssh/use_old_init_script
+  if [ "$RET" = "false" ]; then
+    echo "ssh config: Aborting because ssh/use_old_init_script = false" >&2
+    exit 1
+  fi
+
+  # deal with upgrading from pre-OpenSSH versions
+  key=/etc/ssh/ssh_host_key
+  export key
+  if [ -n "$version" ] && [ -x /usr/bin/ssh-keygen ] && [ -f $key ] &&
+     dpkg --compare-versions "$version" lt 1.2.28
+  then
+    # make sure that keys get updated to get rid of IDEA
+    #
+    # N.B. this only works because we've still got the old
+    # nonfree ssh-keygen at this point
+    #
+    # First, check if we need to bother
+    echo -en '\0\0' | 3<&0 sh -c \
+        'dd if=$key bs=1 skip=32 count=2 2>/dev/null | cmp -s - /dev/fd/3' || {
+      # this means that bytes 32&33 of the key were not both zero, in which
+      # case the key is encrypted, which we need to fix
+      chmod 600 $key
+      ssh-keygen -u -f $key >/dev/null
+      if type restorecon >/dev/null 2>&1; then
+        restorecon "$key.pub"
+      fi
+    }
+  fi
+fi
+
+#DEBHELPER#
diff --git a/debian/openssh-server.prerm b/debian/openssh-server.prerm
new file mode 100644
index 000000000..9c3313aac
--- /dev/null
+++ b/debian/openssh-server.prerm
@@ -0,0 +1,48 @@
+#! /bin/sh
+# prerm script for ssh
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <prerm> `remove'
+#        * <old-prerm> `upgrade' <new-version>
+#        * <new-prerm> `failed-upgrade' <old-version>
+#        * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
+#        * <deconfigured's-prerm> `deconfigure' `in-favour'
+#          <package-being-installed> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see /usr/share/doc/packaging-manual/
+
+case "$1" in
+    remove|deconfigure)
+        if [ -x /etc/init.d/ssh ]; then
+                if [ -x /usr/sbin/invoke-rc.d ]; then
+                        invoke-rc.d ssh stop
+                else
+                        /etc/init.d/ssh stop
+                fi
+        fi
+        ;;
+    upgrade)
+        # remove symlink on downgrade to when it was a directory
+        if [ -L /usr/share/doc/openssh-server ] && \
+           dpkg --compare-versions "$2" lt-nl 1:4.1p1-5; then
+                rm -f /usr/share/doc/openssh-server
+        fi
+        ;;
+    failed-upgrade)
+        ;;
+    *)
+        echo "prerm called with unknown argument \`$1'" >&2
+        exit 0
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
diff --git a/debian/openssh-server.ssh.pam b/debian/openssh-server.ssh.pam
new file mode 100644
index 000000000..ce33b9347
--- /dev/null
+++ b/debian/openssh-server.ssh.pam
@@ -0,0 +1,29 @@
+# PAM configuration for the Secure Shell service
+
+# Read environment variables from /etc/environment and
+# /etc/security/pam_env.conf.
+auth       required     pam_env.so # [1]
+
+# Standard Un*x authentication.
+@include common-auth
+
+# Standard Un*x authorization.
+@include common-account
+
+# Standard Un*x session setup and teardown.
+@include common-session
+
+# Print the message of the day upon successful login.
+session    optional     pam_motd.so # [1]
+
+# Print the status of the user's mailbox upon successful login.
+session    optional     pam_mail.so standard noenv # [1]
+
+# Set up user limits from /etc/security/limits.conf.
+session    required     pam_limits.so
+
+# Set up SELinux capabilities (need modified pam)
+# session  required     pam_selinux.so multiple
+
+# Standard Un*x password updating.
+@include common-password
diff --git a/debian/openssh-server.templates.master b/debian/openssh-server.templates.master
new file mode 100644
index 000000000..3f7f017fd
--- /dev/null
+++ b/debian/openssh-server.templates.master
@@ -0,0 +1,69 @@
+Template: ssh/new_config
+Type: boolean
+Default: true
+_Description: Generate new configuration file
+ This version of OpenSSH has a considerably changed configuration file from
+ the version shipped in Debian 'Potato', which you appear to be upgrading
+ from. I can now generate you a new configuration file
+ (/etc/ssh/sshd.config), which will work with the new server version, but
+ will not contain any customisations you made with the old version.
+ .
+ Please note that this new configuration file will set the value of
+ 'PermitRootLogin' to yes (meaning that anyone knowing the root password
+ can ssh directly in as root). It is the opinion of the maintainer that
+ this is the correct default (see README.Debian for more details), but you
+ can always edit sshd_config and set it to no if you wish.
+ .
+ It is strongly recommended that you let me generate a new configuration
+ file for you.
+
+Template: ssh/use_old_init_script
+Type: boolean
+Default: false
+_Description: Do you want to continue (and risk killing active ssh sessions)?
+ The version of /etc/init.d/ssh that you have installed, is likely to kill
+ all running sshd instances.  If you are doing this upgrade via an ssh
+ session, that would be a Bad Thing(tm).
+ .
+ You can fix this by adding "--pidfile /var/run/sshd.pid" to the
+ start-stop-daemon line in the stop section of the file.
+
+Template: ssh/insecure_rshd
+Type: note
+_Description: Warning: rsh-server is installed --- probably not a good idea
+ having rsh-server installed undermines the security that you were probably
+ wanting to obtain by installing ssh.  I'd advise you to remove that
+ package.
+
+Template: ssh/insecure_telnetd
+Type: note
+_Description: Warning: telnetd is installed --- probably not a good idea
+ I'd advise you to either remove the telnetd package (if you don't actually
+ need to offer telnet access) or install telnetd-ssl so that there is at
+ least some chance that telnet sessions will not be sending unencrypted
+ login/password and session information over the network.
+
+Template: ssh/encrypted_host_key_but_no_keygen
+Type: note
+_Description: Warning: you must create a new host key
+ There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH
+ can not handle this host key file, and I can't find the ssh-keygen utility
+ from the old (non-free) SSH installation.
+ .
+ You will need to generate a new host key.
+
+Template: ssh/disable_cr_auth
+Type: boolean
+Default: false
+_Description: Disable challenge-response authentication?
+ Password authentication appears to be disabled in your current OpenSSH
+ server configuration. In order to prevent users from logging in using
+ passwords (perhaps using only public key authentication instead) with
+ recent versions of OpenSSH, you must disable challenge-response
+ authentication, or else ensure that your PAM configuration does not allow
+ Unix password file authentication.
+ .
+ If you disable challenge-response authentication, then users will not be
+ able to log in using passwords. If you leave it enabled (the default
+ answer), then the 'PasswordAuthentication no' option will have no useful
+ effect unless you also adjust your PAM configuration in /etc/pam.d/ssh.
diff --git a/debian/po/POTFILES.in b/debian/po/POTFILES.in
new file mode 100644
index 000000000..a45424a6b
--- /dev/null
+++ b/debian/po/POTFILES.in
@@ -0,0 +1 @@
+[type: gettext/rfc822deb] openssh-server.templates.master
diff --git a/debian/po/ca.po b/debian/po/ca.po
new file mode 100644
index 000000000..f102c856f
--- /dev/null
+++ b/debian/po/ca.po
@@ -0,0 +1,318 @@
+# openssh (debconf) translation to Catalan.
+# Copyright (C) 2004 Free Software Foundation, Inc.
+# Aleix Badia i Bosch <abadia@ica.es>, 2004
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh_1:3.8p1-3_templates\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2004-03-05 19:46GMT\n"
+"Last-Translator: Aleix Badia i Bosch <abadia@ica.es>\n"
+"Language-Team: Catalan <debian-l10n-catalan@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Genera un fitxer de configuració nou"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Els fitxers de configuració de l'Openssh s'han modificat considerablement "
+"respecte als de Debian 'Potato', de la qual sembla que esteu actualitzant. "
+"Podeu generar un fitxer de configuració nou (/etc/sshd/sshd.config), que "
+"funcionarà amb la nova versió del servidor però no tindrà els paràmetres de "
+"configuració personalitzats de la versió antiga."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Recordeu que el valor de 'PermitRootLogin' del nou fitxer configuració serà "
+"yes (qualsevol persona que conegui la contrasenya del superadministrador "
+"podrà utilitzar l'ssh com a superadministrador). El valor predeterminat "
+"d'aquesta opció és una opinió personal del mantenidor (per a més informació "
+"vegeu el fitxer README.Debian), tot i això el podeu modificar editant el "
+"fitxer sshd_config i modificar definint com a no."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Es molt recomanable que deixeu que se us creï el nou fitxer de configuració."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+"Esteu segur de voler continuar (tot i la possibilitat d'aturar les sessions "
+"d'ssh actives)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"La versió de l'/etc/init.d/ssh que heu instal·lat probablement aturarà les "
+"instàncies de l'sshd que s'estan executant. Si esteu realitzant "
+"l'actualització de de d'una sessió d'ssh us podria penjar la connexió."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Ho podeu arreglar afegint la línia \"--pidfile /var/run/sshd.pid\" a la "
+"línia start-stop-daemon de la secció stop del fitxer."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"Avís: el servidor rsh-server està instal·lat --- probablement no sigui una "
+"bona idea"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"si teniu instal·lat l'rsh-server perdreu la seguretat que esperaveu obtenir "
+"instal·lant l'ssh. És aconsellable suprimir el paquet."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr ""
+"Avís: el telnetd està instal·lat --- probablement no sigui una bona idea"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Es aconsellable suprimir el paquet telnetd (si no heu d'oferir accés a "
+"telnet) o torneu a instal·lar el paquet telnetd-ssl si més no per assegurar "
+"que les sessions de telnet no enviaran les informació del nom d'usuari i "
+"contrasenya sense xifrar a través de la xarxa."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Avís: heu de crear una nova clau del servidor central"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Hi ha un fitxer antic /etc/ssh/ssh_host_key antic xifrat amb IDEA. L'OpenSSH "
+"no pot gestionar aquest fitxer de clau de l'ordinador central i no es pot "
+"trobar l'eina ssh-keygen de la instal·lació d'SSH anterior (non-free)."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Haureu de generar una nova clau de l'ordinador central."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "Voleu que el fitxer ssh-keysign s'instal·li SUID root?"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr "Podeu instal·lar l'ajudant del ssh-keysign amb el bit SUID definit."
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "Si definiu l'ssh-keysign SUID podreu utilitzat l'autenticació basada en "
+#~ "l'ordinador central del Protocol 2 de l'SSH."
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "Si dubteu instal·leu-lo amb el SUID. Si us causa algun problema ho podeu "
+#~ "modificar posteriorment executant l'ordre:  dpkg-reconfigure ssh"
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "Permet únicament la versió 2 del protocol d'SSH"
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "Aquesta versió de l'OpenSSH suporta la versió 2 del protocol d'ssh, "
+#~ "aquesta versió és molt més segura. És recomanable inhabilitar la versió 1 "
+#~ "del protocol, tot i això relantitzà el funcionament dels ordinadors més "
+#~ "antics i no permetrà les connexions als clients antics (afectarà al "
+#~ "client proporcionat per la \"potato\")."
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "Recordeu que les claus que utilitza la versió 1 del protocol són "
+#~ "diferents i no les podreu utilitzar si habiliteu únicament les connexions "
+#~ "de la versió 2 del protocol."
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "Si posteriorment canvieu d'opinió respecte a la configuració, podeu "
+#~ "trobar les instruccions per modificar el fitxer sshd_config a README."
+#~ "Debian."
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr ""
+#~ "Nota: les opcions de reenviament de les X11 i autorització estan "
+#~ "inhabilitades per defecte."
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "Per raons de seguretat  i de forma predeterminada la versió d'ssh de "
+#~ "Debian té les opcions ForwardX11 i ForwardAgent definides a \"off\"."
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "Ho podeu habilitar pels servidors de confiança, ja sigui en un dels "
+#~ "fitxers de configuració o a través de l'opció de la línia d'ordre -X."
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr ""
+#~ "Podeu trobar més informació al fitxer /usr/share/doc/ssh/README.Debian"
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "S'han combinat les claus de l'ssh2 als fitxers de configuració"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "Des de la versió 3 de l'OpenSSH ja no s'utilitzaran fitxers separats per "
+#~ "les claus de l'ssh1 i ssg2. Ja no caldran els fitxer authorized_keys2 i "
+#~ "known_hosts2. Es continuaran llegint per mantenir la compatibilitat amb "
+#~ "les versions anteriors."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Voleu executar el servidor d'sshd?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "El paquet conté el client i el servidor d'ssh."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "L'sshd (servidor de l'intèrpret d'ordres segur) s'executarà, normalment, "
+#~ "per permetre l'entrada remota a través de l'ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Podeu inhabilitar l'sshd si voleu utilitzar el client d'ssh únicament per "
+#~ "connexions a l'exterior i no per acceptar connexions remotes."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "S'ha prohibit les opcions d'entorn a les claus."
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "L'OpenSSH inhabilita, per defecte i per evitar diversos atacs (per "
+#~ "exemple LD_PRELOAD), les opcions d'entorn per les claus públiques. Si "
+#~ "utilitzeu aquesta opció al fitxer authorized_keys recordeu que les claus "
+#~ "de la qüestió no funcionaran fins que no se suprimeixi l'opció."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Per tornar a habilitar l'opció definiu \"PermitUserEnvironment yes\" al "
+#~ "fitxer /etc/ssh/sshd_config al finalitzar l'actualització (recordeu la "
+#~ "nota d'avís de la pàgina del manual sshd_config(5)). "
diff --git a/debian/po/cs.po b/debian/po/cs.po
new file mode 100644
index 000000000..858185ea2
--- /dev/null
+++ b/debian/po/cs.po
@@ -0,0 +1,323 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2005-03-09 18:29+0100\n"
+"Last-Translator: Miroslav Kure <kurem@debian.cz>\n"
+"Language-Team: Czech <provoz@debian.cz>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-2\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Generovat nový konfiguraèní soubor"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Tato verze OpenSSH má oproti verzi dodávané s Debianem 2.2, kterou nyní "
+"pravdìpodobnì aktualizujete, znaènì odli¹ný konfiguraèní soubor. Nyní mohu "
+"vytvoøit nový konfiguraèní soubor (/etc/ssh/sshd.config), který bude "
+"pracovat s novou verzí, ale nebude obsahovat ¾ádné úpravy, které jste "
+"provedli ve staré verzi."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"V novém konfiguraèním souboru bude parametr PermitRootLogin nastaven na "
+"hodnotu 'yes'. To znamená, ¾e se kdokoliv se znalostí rootova hesla mù¾e "
+"pøihlásit rovnou jako root. Pokud se chcete vrátit ke starému chování, staèí "
+"v sshd_config nastavit tento parametr na hodnotu 'no'. Více v README.Debian."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr "Je vøele doporuèeno nechat mì vyrobit konfiguraèní soubor."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "Chcete pokraèovat (a riskovat ukonèení aktivních ssh spojení)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Stávající verze /etc/init.d/ssh pravdìpadobnì pozabíjí v¹echny bì¾ící "
+"instance sshd. Pokud tuto aktualizaci provádíte pøes ssh, byla by to ©patná "
+"Vìc(tm)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Mù¾ete to spravit pøidáním \"--pidfile /var/run/sshd.pid\" do sekce stop na "
+"øádek se start-stop-daemon."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Varování: je nainstalován rsh-server --- to není dobrý nápad"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"nainstalováním rsh-server si bouráte bezpeènost, kterou jste pravdìpodobnì "
+"chtìli dosáhnout instalací ssh. Doporuèujeme tento balík odstranit."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Varování: je nainstalován telnetd --- to není dobrý nápad"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Doporuèujeme buï odstranit balík telnetd (pokud telnet pøístup "
+"nepotøebujete), nebo nainstalovat telnetd-ssl, kde je alespoò nìjaká ¹ance, "
+"¾e spojení nebudou po síti zasílat neza¹ifrovaná jména/hesla/informace."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Varování: musíte vytvoøit nový serverový klíè"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"V /etc/ssh/ssh_host_key se nachází starý klíè ¹ifrovaný algoritmem IDEA. "
+"OpenSSH neumí tento soubor zpracovat a nemohu najít utilitu ssh-keygen ze "
+"staré (nesvobodné) instalace SSH."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Musíte vygenerovat nový serverový klíè"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr "Zakázat autentizaci challenge-response?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"Zdá se, ¾e autentizace pomocí hesel je ve va¹í stávající konfiguraci OpenSSH "
+"serveru zakázána. Abyste zabránili u¾ivatelùm v pøihlá¹ení pouze pomocí "
+"hesla, musíte v posledních verzích OpenSSH zakázat autentizaci challenge-"
+"response, nebo jinak zajistit, aby PAM nepovolilo autentizaci vùèi unixovému "
+"souboru hesel."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Zaká¾ete-li autentizaci challenge-response, u¾ivatelé se nebudou moci "
+"pøihlásit pomocí hesel. Necháte-li ji povolenu (pøednastavená odpovìï), pak "
+"nebude mít volba 'PasswordAuthentication no' ¾ádný efekt, pokud ov¹em "
+"neupravíte nastavení PAM v /etc/pam.d/ssh."
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "Chcete ssh-keysign nainstalovat jako SUID root?"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr ""
+#~ "Mù¾ete si vybrat, zda chcete nainstalovat ssh-keysign s nastaveným SUID "
+#~ "bitem."
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "Pokud nastavíte ssh-keysign SUID, mù¾ete pou¾ívat 'host-based' "
+#~ "autentizaci protokolu verze 2."
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "Pokud jste na pochybách, doporuèujeme SUID bit povolit. Pokud zaznamenáte "
+#~ "problémy, mù¾ete nastavení zmìnit spu¹tìním:   dpkg-reconfigure ssh"
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "Povolit pouze SSH protokol verze 2"
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "Tato verze OpenSSH podporuje ssh protokol ve verzi 2, který je mnohem "
+#~ "bezpeènìj¹í. Je dobré ssh verze 1 zakázat, nicménì na slab¹ích poèítaèích "
+#~ "se projeví zpomalení a také tím znemo¾níte pøihlá¹ení star¹ích klientù "
+#~ "(napøíklad tìch z Debianu 2.2)."
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "Také si v¹imnìte, ¾e klíèe protokolu verze 1 jsou odli¹né a pokud "
+#~ "povolíte pouze protokol verze 2, nebudete je moci pou¾ít. "
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "Pokud se pozdìji rozhodnete jinak, v README.Debian se nachází pøesný "
+#~ "návod, jak upravit soubor sshd_config."
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "Klíèe ssh2 v konfiguraèních souborech byly spojeny"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "OpenSSH verze 3 ji¾ nepou¾ívá oddìlené soubory pro klíèe verze ssh1 a "
+#~ "ssh2. To znamená, ¾e soubory authorized_keys2 a known_hosts2 ji¾ nejsou "
+#~ "potøeba, ov¹em z dùvodù zachování zpìtné kompatibility jsou stále "
+#~ "naèítány."
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr "POZNÁMKA: Autorizace a pøesmìrování X11 je standardnì vypnuto."
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "Z bezpeènostních dùvodù má verze ssh v Debianu standardnì nastavené "
+#~ "ForwardX11 a ForwardAgent na hodnotu \"off\"."
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "Pro servery, kterým dùvìøujete, mù¾ete tyto parametry povolit v jednom z "
+#~ "konfiguraèních souborù, nebo z pøíkazové øádky parametrem -X."
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr "Více naleznete v /usr/share/doc/ssh/README.Debian"
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Chcete spustit sshd server?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Tento balík obsahuje jak klienta ssh, tak server sshd."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Obvykle se sshd (Secure Shell Server) spou¹tí, aby se vzdálení u¾ivatelé "
+#~ "mohli pøihla¹ovat pøes ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Pokud na tomto poèítaèi chcete vyu¾ívat pouze ssh klienta pro odchozí "
+#~ "spojení, mù¾ete zde sshd zakázat."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Volby prostøedí spojené s klíèi jsou zakázány"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "Pro zamezení urèitých typù útokù (napø. LD_PRELOAD), tato verze OpenSSH "
+#~ "standardnì zabraòuje pou¾ívat volbu prostøedí u veøejných klíèù. Pokud "
+#~ "tuto volbu pou¾íváte v souboru authorized_keys, tak posti¾ené klíèe "
+#~ "nebudou fungovat, dokud jim tuto volbu nesma¾ete."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Pro znovupovolení této volby si po aktualizaci pøeètìte varování v "
+#~ "manuálové stránce sshd_config(5) a v souboru /etc/ssh/sshd_config zadejte "
+#~ "\"PermitUserEnvironment yes\"."
diff --git a/debian/po/da.po b/debian/po/da.po
new file mode 100644
index 000000000..6163a1e9d
--- /dev/null
+++ b/debian/po/da.po
@@ -0,0 +1,272 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh 3.8.1p1\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2004-10-10 21:04+0200\n"
+"Last-Translator: Morten Brix Pedersen <morten@wtf.dk>\n"
+"Language-Team: Danish <dansk@klid.dk>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Opret ny opsætningsfil"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Denne version af OpenSSH har en betydeligt ændret opsætningsfil fra den "
+"version der kom med Debian 'Potato', som du ser ud til at opgradere fra. Jeg "
+"kan oprette en ny opsætningsfil (/etc/ssh/sshd.config), som vil virke med "
+"den nye server version, men det vil ikke beholde eventuelle ændringer du "
+"lavede med den gamle version."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Bemærk at den nye opsætningsfil vil sætte værdien af 'PermitRootLogin' til "
+"ja (som betyder at alle der kender roots adgangskode, kan tilgå maskinen via "
+"ssh direkte). Det er vedligeholderens mening, at det er den korrekte "
+"standard-værdi (se README.Debian for flere detaljer), men du kan altid "
+"redigere sshd_config og slå det fra, hvis du ønsker."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr "Du rådes stærkt til at lade mig oprette en ny opsætningsfil for dig."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "Vil du fortsætte (og risikere at afbryde aktive ssh-forbindelser)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Den udgave af /etc/init.d/ssh, du har installeret, vil sandsynligvis afbryde "
+"alle sshd-dæmoner. Det vil være en rigtigt dårlig idé, hvis du er ved at "
+"opgradere via en ssh-forbindelse."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Du kan afhjælpe dette ved at tilføje \"--pidfile /var/run/sshd.pid\" til "
+"'start-stop-daemon'-linjen i stop-afsnittet af filen."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Advarsel: rsh-serveren er installeret --- sikkert ikke en god idé"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Den sikkerhed, du nok ønskede at opnå ved at installere ssh undermineres "
+"ved, at du har rsh-server installeret. Jeg vil råde dig til at fjerne pakken "
+"rsh-server."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Advarsel: telnetd er installeret --- sikkert ikke en god idé"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Jeg vil råde dig til enten at fjerne pakken telnetd (hvis du i virkeligheden "
+"ikke har brug for at tilbyde telnet-adgang) eller installere telnetd-ssl, så "
+"der i det mindste er en mulighed for, at telnet-sessioner ikke sender "
+"adgangskoder og sessions-oplysninger ukrypteret over netværket."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Advarsel: du skal oprette en ny værtsnøgle"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Der ligger en gammel, IDEA-krypteret /etc/ssh/ssh_host_key. OpenSSH kan ikke "
+"håndtere en sådan værtsnøglefil, og jeg kan ikke finde værktøjet ssh-keygen "
+"fra den gamle (ikke-frie, 'non-free') SSH-installation."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Du skal oprette en ny værtsnøgle."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr "Slå udfordrings-svar godkendelse fra?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"Adgangskodegodkendelse ser ud til at være deaktiveret i din nuværende "
+"OpenSSH server opsætning. For at forhindre brugere i at logge ind med "
+"adgangskoder (f.eks. kun offentlig nøgle godkendelse) med nyere versioner af "
+"OpenSSH, skal du deaktivere udfordrings-svar godkendelse, eller sikre at din "
+"PAM opsætning ikke itllader Unix adgangskodefil godkendelse."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Hvis du deaktiverer udfordrings-svar godkendelse, vil brugere ikke være i "
+"stand til at logge ind med adgangskoder. Hvis du lader det slået til "
+"(standard svaret), så vil 'PasswordAuthentication no' indstillingen ikke "
+"have nogen effekt, medmindre du også redigerer din PAM opsætning i /etc/pam."
+"d/ssh."
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "Vil du have, at ssh-keysign bliver installeret 'SUID root'?"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr ""
+#~ "Du har mulighed for at installere ssh-keysign hjælperen med SUID-flaget "
+#~ "sat."
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "Hvis du gør ssh-keysign SUID, vil du blive i stand til at benytte SSH "
+#~ "protokol 2's værtsnavn-baserede autentifikation."
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "Hvis du er i tvivl, vil jeg råde dig til at installere den med SUID. Hvis "
+#~ "det skaber problemer, kan du ændre det tilbage igen ved at køre: dpkg-"
+#~ "reconfigure ssh"
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "Tillad kun SSH protokol 2"
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "Denne udgave af OpenSSH understøtter version 2 af ssh-protokollen, som er "
+#~ "betydeligt mere sikker. Det anbefales at deaktivere version 1. Dog kan "
+#~ "det sløve langsomme maskiner ned, og forhindre ældre klienter i at opnå "
+#~ "forbindelse (ssh klienten der kommer med \"potato\" er en af dem)."
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "Du skal også bemærke at de nøgler som bliver anvendt til protokol 1 er "
+#~ "forskellige, så du vil ikke være i stand til at bruge dem, hvis du kun "
+#~ "tillader protokol 2 forbindelser."
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "Hvis du senere ændrer din mening om denne indstilling, har README.Debian "
+#~ "instruktioner på hvad du skal gøre ved din sshd_config fil."
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr ""
+#~ "BEMÆRK: Videregivelse af X11 og adgangkontrol er som standard deaktiveret."
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "Af sikkerhedsgrunde har Debianudgaven af ssh sat ForwardX11 og "
+#~ "ForwardAgent til 'off' som standard."
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "Du kan aktivere dem for servere du stoler på, enten i en af "
+#~ "opsætningsfilerne eller med kommandolinjetilvalget '-X'."
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr "Flere detaljer kan findes i /usr/share/doc/ssh/README.Debian"
diff --git a/debian/po/de.po b/debian/po/de.po
new file mode 100644
index 000000000..b46aebf23
--- /dev/null
+++ b/debian/po/de.po
@@ -0,0 +1,330 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2004-05-30 09:49-0200\n"
+"Last-Translator: Helge Kreutzmann <kreutzm@itp.uni-hannover.de>\n"
+"Language-Team: de <debian-l10n-german@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Erzeuge eine neue Konfigurationsdatei"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Diese Version von OpenSSH hat eine deutlich geänderte Konfigurationsdatei "
+"von der in 'Potato' ausgelieferten Version, von der Sie anscheinend "
+"aktualisieren. Ich kann nun eine neue Konfigurationsdatei (/etc/ssh/sshd."
+"config) erzeugen, die mit der neuen Server-Version zusammenarbeitet, aber "
+"keine Anpassung aus der alten Version enthält."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Bitte beachten Sie, daß die neue Konfigurationsdatei 'PermitRootLogin' "
+"aufyes setzt (was bedeutet, daß jeder, der das Root-Paßwort kennt, sich "
+"direkt per ssh als root anmelden kann). Es ist die Meinung des Betreuers, "
+"daß dies die richtige Standardeinstellung ist (bitte lesen Sie README.Debian "
+"für weitergehende Informationen), aber Sie können jederzeit sshd_config "
+"editieren und dies auf no setzen, falls Sie dies wünschen."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Es wird stark empfohlen, daß Sie mich eine neue Konfigurationsdatei erzeugen "
+"lassen."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+"Wollen Sie weitermachen (und das Beenden der aktiven Sitzung riskieren)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Die Version von /etc/init.d/ssh, die Sie installiert haben, wird vermutlich "
+"Ihre aktiven ssh-Instanzen beenden. Wenn Sie die Aktualisierung über ssh "
+"erledigen, dann wäre das keine Gute Idee(tm)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Sie können das Problem beheben, indem sie \"--pidfile /var/run/sshd.pid\" an "
+"die start-stop-daemon Zeile in dem Abschnitt stop der Datei /etc/init.d/ssh "
+"hinzufügen."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Warnung: rsh-server ist installiert --- wahrscheinlich keine gute Idee"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"ist es eine schlechte Idee, den rsh-server installiert zu haben, da er die "
+"Sicherheit untergräbt. Wir empfehlen, das Paket zu entfernen."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Warnung: telnetd ist installiert --- wahrscheinlich keine gute Idee"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Wir empfehlen das telnetd Paket zu entfernen (falls Sie keinen telnet Zugang "
+"anbieten) oder telnetd-ssl zu installieren, so daß Sie verhindern können, "
+"daß Login und Passwort unverschlüsselt durch das Netz gesendet werden."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Warnung: Sie müssen einen neuen Host-Schlüssel erzeugen"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Es existiert eine alte Variante von /etc/ssh/ssh_host_key welche per IDEA "
+"verschlüsselt ist. OpenSSH kann eine solche Host-Schlüssel-Datei nicht "
+"verarbeiten und ssh-keygen von der alten (nicht-freien) ssh Installation "
+"kann nicht gefunden werden."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Sie müssen einen neuen Host-Schlüssel erzeugen."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "Möchten Sie ssh-keysign SUID-Root installieren?"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr ""
+#~ "Sie haben die Möglichkeit, den ssh-keysign-Helfer mit gesetzten SUID-Bit "
+#~ "zu installieren."
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "Falls Sie ssh-keysign SUID installieren, können Sie die Host-basierende "
+#~ "Authentisierung von SSH-Protokoll Version 2 verwenden."
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "Falls Sie unsicher sind, empfehle ich, mit SUID zu installieren. Falls es "
+#~ "Probleme gibt, können Sie später Ihre Meinung ändern, indem Sie dpkg-"
+#~ "reconfigure ssh aufrufen."
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "Nur SSH-Protokoll Version 2 erlauben"
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "Diese Version von OpenSSH unterstützt Version 2 des SSH-Protokolls, die "
+#~ "sicherer ist. Es wird empfohlen, Version 1 zu deaktivieren, allerdings "
+#~ "kann dies Vorgänge auf langsamen Maschinen verzögern und alte Clients an "
+#~ "der Verbindungsaufnahme hindern (der ssh-Client von \"potato\" ist davon "
+#~ "betroffen)."
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "Bitte beachten Sie auch, daß sich die für Protokoll 1 verwendeten "
+#~ "Schlüssel unterscheiden und Sie diese daher nicht verwenden können, wenn "
+#~ "Sie nur Protokoll Version 2-Verbindungen erlauben."
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "Falls Sie später Ihre Meinung über diese Einstellung ändern, finden Sie "
+#~ "in README.Debian eine Anleitung was Sie mit der sshd_config-Datei machen "
+#~ "müssen."
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr "HINWEIS: Weiterleiten von X11 und Berechtigungen ist abgeschaltet."
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "Aus Sicherheitsgründen ist bei der Debian-Version von ssh ForwardX11 und "
+#~ "ForwardAgent auf \"off\" gesetzt."
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "Sie können dies für Server, denen Sie trauen, entweder per Eintrag in die "
+#~ "Konfigurations-Dateien oder per Kommando-Zeilen Option -X ändern."
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr ""
+#~ "Weitere Details können Sie in /usr/share/doc/ssh/README.Debian finden."
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "ssh2-Schlüssel in die Konfigurationsdateien eingefügt"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "Mit Version 3 verwendet OpenSSH nicht mehr separate Dateien für ssh1 und "
+#~ "ssh2 Schlüssel. Dies bedeutet, daß authorized_keys2 und known_hosts2 "
+#~ "nicht mehr benötigt werden. Sie werden noch eingelesen, um "
+#~ "Abwärtskompatibilität zu gewähren."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Möchten Sie den sshd Server starten?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Das Paket enthält sowohl den Client als auch den sshd Server."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Normalerweise wird der sshd Secure Shell Server für Remote Logins per "
+#~ "sshgestartet."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Wenn Sie nur den ssh client nutzen wollen, um sich mit anderen Rechnern "
+#~ "zu verbinden, und sich nicht per ssh in diesen Computer einloggen wollen, "
+#~ "dann können Sie hier den sshd abschalten."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Umgebungs-Optionen für Schlüssel wurden missbilligt"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "Diese Version von OpenSSH deaktiviert standardmäßig die Umgebungsoption "
+#~ "füröffentliche Schlüssel um bestimmte Angriffe (zum Beispiel über "
+#~ "LD_PRELOAD) zu vermeiden. Falls Sie diese Option in einer authorized_keys-"
+#~ "Datei verwenden, beachten Sie, daß die in Frage kommenden Schlüssel nicht "
+#~ "funktionieren werden bis diese Option entfernt wurde."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Um diese Option wieder zu reaktivieren, setzen Sie, unter "
+#~ "Berücksichtigung der Warnung in der sshd_config(5)-Handbuchseite, "
+#~ "\"PermitUserEnvironment yes\" in /etc/ssh/sshd_config nachdem die "
+#~ "Aktualisierung erfolgt ist."
diff --git a/debian/po/el.po b/debian/po/el.po
new file mode 100644
index 000000000..9cf252b93
--- /dev/null
+++ b/debian/po/el.po
@@ -0,0 +1,396 @@
+# translation of el.po to Greek
+# translation of templates.po to Greek
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
+#    Developers do not need to manually edit POT or PO files.
+# Konstantinos Margaritis <markos@debian.org>, 2004.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: el\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2004-10-14 21:34+0300\n"
+"Last-Translator: Konstantinos Margaritis <markos@debian.org>\n"
+"Language-Team: Greek <debian-l10n-greek@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.0.2\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Δημιου�γία νέου α�χείου �υθμίσεων"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Αυτή η έκδοση του OpenSSH έχει σημαντικά διαφο�οποιημένο α�χείο �υθμίσεων "
+"από την έκδοση που πε�ιλαμβάνεται στη διανομή 'Potato' του Debian, από την "
+"οποία φαίνεται ότι π�αγματοποιείτε την αναβάθμιση. Στο σημείο αυτό, σας "
+"δίνεται η δυνατότητα να δημιου�γήσετε ένα νέο α�χείο �υθμίσεων (/etc/ssh/"
+"sshd_config), το οποίο χ�ησιμοποιείται από τη νέα έκδοση του δαίμονα, αλλά "
+"δεν θα πε�ιέχει οποιαδήποτε πα�αμετ�οποίηση έχετε ήδη κάνει στην παλιά "
+"έκδοση."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Σημειώστε ότι το νέο α�χείο �υθμίσεων θα καθο�ίσει την τιμή της επιλογής "
+"'PermitRootLogin' σε yes (εννοώντας ότι οποιοσδήποτε γνω�ίζει τον κωδικό "
+"π�όσβασης του root μπο�εί να συνδεθεί ως χ�ήστης root). Κατά τον συντη�ητή "
+"αυτή είναι και η σωστή π�οκαθο�ισμένη ��θμιση (δείτε το README.Debian για "
+"πε�ισσότε�ες λεπτομέ�ειες), αλλά μπο�είτε οποιαδήποτε στιγμή να αλλάξετε την "
+"τιμή σε no στο α�χείο sshd_config."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr "Συνιστάται να επιλέξετε την δημιου�γία του νέου α�χείου �υθμίσεων."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+"Θέλετε να συνεχίσετε (με κίνδυνο τε�ματισμο� των ενε�γών συνεδ�ιών ssh);"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Η τ�έχουσα έκδοση του /etc/init.d/ssh που είναι εγκατεστημένη, πιθανότατα θα "
+"τε�ματίσει όλες τις συνεδ�ίες του sshd.  Αν κάνετε αυτήν την αναβάθμιση μέσω "
+"μιας συνεδ�ίας ssh, αυτό είναι μάλλον κακή ιδέα..."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Μπο�είτε να το διο�θώσετε αυτό π�οσθέτοντας \"--pidfile /var/run/sshd.pid\" "
+"στη γ�αμμή start-stop-daemon στο τμήμα \"stop\" του α�χείου."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"Π�οσοχή: είναι ήδη εγκατεστημένος ο rsh-server --- όχι και τοσο καλή ιδέα"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Η πα�ουσία του rsh-server υπονομε�ει την ασφάλεια του συστήματος, την οποία "
+"θέλετε να εξασφαλίσετε με την εγκατάσταση του ssh. Συνιστάται η αφαί�εση "
+"αυτο� του πακέτου."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Π�οσοχή: είναι ήδη εγκατεστημένος ο telnetd --- όχι και τοσο καλή ιδέα"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Συνιστάται είτε να αφαι�έσετε το πακέτο telnetd (αν δεν είναι π�αγματικά "
+"απα�αίτητη η π�όσβαση μέσω telnet) ή να εγκαταστήσετε το πακέτο telnetd-ssl, "
+"ώστε να υπά�χει τουλάχιστον μια πιθανότητα οι συνδέσεις telnet να μην "
+"αποστέλλουν μη κ�υπτογ�αφημένες πλη�οφο�ίες κωδικών π�όσβασης και συνεδ�ιών "
+"μέσω δικτ�ου."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr ""
+"Π�οσοχή: π�έπει να δημιου�γήσετε ένα νέο κλειδί για τον υπολογιστή (host key)"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Υπά�χει ένα παλαιότε�ο κλειδί /etc/ssh/ssh_host_key, που είναι "
+"κ�υπτογ�αφημένο με τον αλγό�ιθμο IDEA. Το OpenSSH δε μπο�εί να χει�ιστεί "
+"αυτό το κλειδί και δεν έχει β�εθεί το ε�γαλείο ssh-keygen από την παλιά (μη "
+"ελε�θε�η) εγκατάσταση του SSH."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Π�έπει να δημιου�γήσετε ένα νέο κλειδί για τον υπολογιστή (host key)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr "�α απενε�γοποιηθεί η πιστοποίηση challenge-response;"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"Η πιστοποίηση με κωδικό είναι απενε�γοποιημένη στο τω�ινό OpenSSH "
+"εξυπη�ετητή. Για να αποτ�έψετε την είσοδο τον χ�ηστών με χ�ήση κωδικο� (για "
+"πα�άδειγμα να γίνεται χ�ήση μόνο του δημοσίου κλειδιο�) με την π�όσφατες "
+"εκδόσεις του OpenSSH, θα π�έπει να απενε�γοποιήσετε την πιστοποίηση "
+"challenge-response ή να επιβεβαιώσετε ότι η διαμό�φωση του PAM δεν επιτ�έπει "
+"την πιστοποίηση με α�χείο κωδικών."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Εάν απενε�γοποιήσετε την πιστοποίηση challenge-response, οι χ�ήστες δεν θα "
+"μπο�ο�ν να εισέλθουν χ�ησιμοποιώντας τον κωδικό τους. Εάν το αφήσετε "
+"ενε�γοποιημένο (π�οεπιλογή), τότε η επιλογή 'PasswordAuthetication no' δεν "
+"θα επιδ�ά εκτός και εάν �υθμίσετε και το PAM στο α�χείο /etc/pam.d/ssh."
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "Θέλετε να εγκαταστήσετε το ssh-keysign ως SUID;"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr ""
+#~ "Έχετε την επιλογή της εγκατάστασης του ε�γαλείου ssh-keysign με το bit "
+#~ "SUID ενε�γοποιημένο."
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "Αν εγκαταστήσετε το ssh-keysign SUID, θα μπο�είτε να χ�ησιμοποιήσετε την "
+#~ "πιστοποίηση υπολογιστή (host-based authentication) του π�ωτοκόλου SSH 2."
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "Αν έχετε αμφιβολίες, συνιστάται να το εγκαταστήσετε SUID.  Αν "
+#~ "διαπιστώσετε π�οβλήματα μπο�είτε να αλλάξετε τη ��θμιση αυτή εκτελώντας:  "
+#~ "dpkg-reconfigure ssh"
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "�α επιτ�έπεται μόνο η χ�ήση του π�ωτοκόλλου SSH 2"
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "Αυτή η έκδοση του OpenSSH υποστη�ίζει την έκδοση 2 του π�ωτοκόλλου ssh, "
+#~ "που είναι πολ� πιο ασφαλής.  Συνιστάται η απενε�γοποίηση της έκδοσης 1, "
+#~ "ωστόσο αυτό θα γίνει εις βά�ος της ταχ�τητας σε χαμηλότε�ων επιδόσεων "
+#~ "συστήματα και θα απαγο�έψει τη σ�νδεση σε παλαιότε�α π�ογ�άμματα-πελάτες "
+#~ "(π.χ. ο πελάτης ssh που διανέμεται με την έκδοση \"potato\")."
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "Επίσης, σημειώστε ότι τα κλειδιά που χ�ησιμοποιο�νταν στο π�ωτόκολλο 1 "
+#~ "είναι διαφο�ετικά και δε θα είναι δυνατή η χ�ήση τους αν επιτ�έψετε μόνο "
+#~ "τις συνδέσεις με το π�ωτόκολλο 2."
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "Αν αποφασίσετε διαφο�ετικά α�γότε�α για αυτή τη ��θμιση, το α�χείο README."
+#~ "Debian έχει οδηγίες για την κατάλληλη τ�οποποίηση του α�χείου sshd_config."
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr ""
+#~ "ΣΗΜΕΙΩΣΗ: Η π�οώθηση των πακέτων X11 και πιστοποίησης είναι "
+#~ "απενε�γοποιημένηεξ ο�ισμο�."
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "Για λόγους ασφαλείας, η έκδοση του ssh στο Debian έχει τις επιλογές "
+#~ "ForwardX11 και ForwardAgent ο�ισμένες σε ``off'' εξ ο�ισμο�."
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "Μπο�είτε να τα ενε�γοποιήσετε για διακομιστές που εμπιστε�εστε, είτε σε "
+#~ "ένα από τα α�χεία �υθμίσεων, είτε μέσω της επιλογής -X στη γ�αμμή εντολών."
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr ""
+#~ "Πε�ισσότε�ες λεπτομέ�ειες μπο�είτε να β�είτε στο α�χείο /usr/share/doc/"
+#~ "ssh/README.Debian"
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "Τα κλειδιά ssh2 συγχωνε�τηκαν στα α�χεία �υθμίσεων"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "Από την έκδοση 3 και έπειτα, το OpenSSH δεν χ�ησιμοποιεί πλέον ξεχω�ιστά "
+#~ "α�χεία για τα κλειδιά των ssh1 και ssh2. Αυτό σημαίνει ότι τα α�χεία "
+#~ "authorized_keys2 και known_hosts2 δεν είναι πλέον απα�αίτητα. Θα "
+#~ "χ�ησιμοποιο�νται μόνο για λόγους συμβατότητας."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Θέλετε να εκτελέσετε τον δαίμονα sshd;"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Το πακέτο αυτό πε�ιέχει το πελάτη ssh και το δαίμονα sshd."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Κανονικά ο δαίμονας sshd (Δαίμονας Ασφαλο�ς Κελ�φους) θα εκτελείται για "
+#~ "απομακ�υσμένες συνδέσεις μέσω ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Αν ενδιαφέ�εστε μόνο για τη χ�ήση του πελάτη ssh για εξε�χόμενες "
+#~ "συνδέσεις από αυτόν τον υπολογιστή και δεν επιθυμείτε να συνδέεστε σε "
+#~ "αυτόν μέσω ssh, τότε μπο�είτε να απενε�γοποιήσετε τον sshd στο σημείο "
+#~ "αυτό."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr ""
+#~ "Οι επιλογές πε�ιβάλλοντος κελ�φους για τα κλειδιά είναι πλέον πα�ωχημένες."
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "Αυτή η έκδοση του OpenSSH απενε�γοποιεί τις επιλογές πε�ιβάλλοντος "
+#~ "κελ�φους για δημόσια κλειδιά εξ ο�ισμο�, ώστε να αποφευχθο�ν ο�ισμένου "
+#~ "τ�που επιθέσεις (για πα�άδειγμα, LD_PRELOAD). Αν χ�ησιμοποιείτε αυτήν την "
+#~ "επιλογή σε ένα α�χείο authorized_keys, έχετε υπόψιν σας ότι τα "
+#~ "συγκεκ�ιμένα κλειδιά δεν θα χ�ησιμοποιο�νται έως ότου αφαι�εθεί η επιλογή "
+#~ "αυτή."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Για να επανενε�γοποιήσετε αυτήν την επιλογή, ο�ίστε "
+#~ "\"PermitUserEnvironment yes\" στο α�χείο /etc/ssh/sshd_config μετά το "
+#~ "τέλος της αναβάθμισης, έχοντας υπόψιν την π�οειδοποίηση στη σελίδα "
+#~ "οδηγιών του sshd_config(5)."
+
+#~ msgid "Privilege separation"
+#~ msgstr "Διαχω�ισμός Π�ονομίων"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "Ο διαχω�ισμός π�ονομίων είναι ενε�γοποιημένος εξ ο�ισμο�, οπότε αν "
+#~ "αποφασίσετε ότι θέλετε να τον απενε�γοποιήσετε, π�έπει να π�οσθέσετε την "
+#~ "��θμιση \"UsePrivilegeSeparation no\" στο α�χείο sshd_config."
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "Ενε�γοποίηση Διαχω�ισμο� Π�ονομίων"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "Αυτή η έκδοση του OpenSSH πε�ιλαμβάνει τη νέα επιλογή διαχω�ισμο� "
+#~ "π�ονομίων. Αυτό μειώνει δ�αστικά το ποσοστό των π�ογ�αμμάτων που "
+#~ "εκτελο�νται ως root, και κατά συνέπεια και τις τ��πες ασφαλείας του sshd."
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "Δυστυχώς, ο διαχω�ισμός π�ονομίων δεν συνε�γάζεται σωστά με το PAM. "
+#~ "Οποιεσδήποτε μονάδες συνεδ�ίας (session modules) του PAM που π�έπει να "
+#~ "εκτελεστο�ν ως root (pam_mkhomedir, για πα�άδειγμα) θα αποτ�χουν, και η "
+#~ "πιστοποίηση μέσω πληκτ�ολογίου στο PAM δεν θα λειτου�γεί."
+
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "Εφόσον έχετε επιλέξει να δημιου�γήθεί αυτόματα το α�χείο sshd_config, "
+#~ "μπο�είτε να επιλέξετε επίσης αν θέλετε να ενε�γοποιήσετε το διαχω�ισμό "
+#~ "π�ονομίων ή όχι. Εκτός αν γνω�ίζετε ότι χ�ειάζεστε να χ�ησιμοποιήσετε "
+#~ "χα�ακτη�ιστικά του PAM που δε συνε�γάζονται με αυτή την επιλογή, "
+#~ "συνιστάται να την ενε�γοποιήσετε."
diff --git a/debian/po/es.po b/debian/po/es.po
new file mode 100644
index 000000000..9d5d6fb7a
--- /dev/null
+++ b/debian/po/es.po
@@ -0,0 +1,407 @@
+#
+# openssh debconf translation to spanish
+# Copyright (C) 2003 Software in the Public Interest
+# This file is distributed under the same license as the XXXX package.
+#
+# Changes:
+# - Initial translation
+#    Carlos Valdivia Yagüe <valyag@dat,etsit.upm.es>, 2003
+# - Revision
+#    Javier Fernandez-Sanguino Peña <jfs@computer.org>, 2004
+#
+#
+#  Traductores, si no conoce el formato PO, merece la pena leer la 
+#  documentación de gettext, especialmente las secciones dedicadas a este
+#  formato, por ejemplo ejecutando:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+# Equipo de traducción al español, por favor lean antes de traducir
+# los siguientes documentos:
+# 
+# - El proyecto de traducción de Debian al español
+#   http://www.debian.org/intl/spanish/coordinacion
+#   especialmente las notas de traducción en
+#   http://www.debian.org/intl/spanish/notas
+#
+# - La guía de traducción de po's de debconf:
+#   /usr/share/doc/po-debconf/README-trans
+#   o http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh 3.6.1p2-11\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2004-10-12 00:00-0500\n"
+"Last-Translator: Javier Fernandez-Sanguino Peña <jfs@computer.org>\n"
+"Language-Team: Debian L10n Spanish <debian-l10n-spanish@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Generar un nuevo fichero de configuración"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Esta versión de OpenSSH tiene un fichero de configuración considerablemente "
+"diferente del incluido en Debian 'Potato', que es la versión desde la que "
+"parece estar actualizando. Puede crear automáticamente un nuevo fichero de "
+"configuración (/etc/ssh/sshd_config), que funcionará con la nueva versión "
+"del servidor, pero no incuirá las modificaciones que hiciera en la versión "
+"antigua."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Además, recuerde que este nuevo fichero de configuración dirá sí en la "
+"opción «PermitRootLogin», por lo que cualquiera que conozca la contraseña de "
+"root podrá entrar mediante ssh directamente como root. En opinión del "
+"mantenedor ésta es la opción predeterminada más adecuada (puede leer README."
+"Debian si quiere conocer más detalles), pero siempre puede editar "
+"sshd_config y poner no si lo desea."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Es muy recomendable que permita que se genere un nuevo fichero de "
+"configuración ahora."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "¿Desea continuar, aún a riesgo de matar las sesiones ssh activas?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"La versión de /etc/init.d/ssh que tiene instalada es muy probable que mate "
+"el demonio ssh. Si está actualizando a través de una sesión ssh, puede que "
+"no sea muy buena idea."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Puede arreglarlo añadiendo «--pidfile /var/run/sshd.pid» a la línea 'start-"
+"stop-daemon', en la sección 'stop' del fichero."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"Aviso: tiene rsh-server instalado (seguramente, esto no es una buena idea)"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Tener rsh-server instalado representa un menoscabo de la seguridad que "
+"probablemente desea obtener instalando ssh. Es muy aconsejable que borre ese "
+"paquete."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Aviso: tiene telnetd instalado (posiblemente no es una buena idea)"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Es muy aconsejable que borre el paquete telnetd si no necesita realmente "
+"ofrecer acceso mediante telnet o instalar telnetd-ssl para que las "
+"contraseñas, nombres de usuario y demás información de las sesiones telnet "
+"no viajen sin cifrar por la red."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Aviso: debe crear una nueva clave para su servidor"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Su sistema tiene un /etc/ssh/ssh_host_key antiguo, que usa cifrado IDEA. "
+"OpenSSH no puede manejar este fichero de claves y tampoco se encuentra la "
+"utilidad ssh-keygen incluida en el paquete ssh no libre."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Necesitará generar una nueva clave para su servidor."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr "¿Desea deshabilitar la autenticación basada en desafío-respuesta?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"Parece que la configuración actual de su servidor de OpenSSH tiene "
+"deshabilitada la autenticación mediante contraseñas. En las versiones "
+"recientes de OpenSSH para impedir que los usuarios se puedan conectar con "
+"contraseñas (y obligar la utilización de sistemas de autenticación con clave "
+"pública) debe deshabilitar la autenticación basada en desafío-respuesta o "
+"asegurarse de que su configuración PAM no permite autenticación basada en el "
+"fichero de contraseñas Unix."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Si deshabilita la autenticación mediante desafío-respuesta los usuarios no "
+"podrán acceder con contraseñas. Si la deja habilitada (respuesta por "
+"omisión) entonces la opción «PasswordAuthentication no» no tendrá ninguna "
+"utilidad a menos que ajuste su configuración de PAM en «/etc/pam.d/ssh»."
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "¿Quiere instalar ssh-keysign SUID root?"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr ""
+#~ "Puede instalar ssh-keysign con el bit SUID (se ejecutará con privilegios "
+#~ "de root)."
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "Si hace ssh-keysign SUID, podrá usar la autenticación basada en servidor "
+#~ "de la versión 2 del protocolo SSH."
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "Si duda, se recomienda que lo instale SUID. Si le causa problemas puede "
+#~ "cambiar de opinión posteriormente ejecutando «dpkg-reconfigure ssh»."
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "Permitir sólo la versión 2 del protocolo SSH"
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "Esta versión de OpenSSH soporta la versión 2 del protocolo ssh, que es "
+#~ "mucho más segura que la anterior. Se recomienda desactivar la versión 1, "
+#~ "aunque funcionará más lento en máquinas modestas y puede impedir que se "
+#~ "conecten clientes antiguos, como, por ejemplo, el incluido en «potato»."
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "También tenga en cuenta que las claves utilizadas para el protocolo 1 son "
+#~ "diferentes, por lo que no podrá usarlas si únicamente permite conexiones "
+#~ "mediante la versión 2 del protocolo."
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "Si más tarde cambia de opinión, el fichero README.Debian contiene "
+#~ "instrucciones sobre cómo modificar en el fichero sshd_config."
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr "NOTA: Reenvío de X11 y Autorización desactivadas por defecto."
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "Por razones de seguridad, la versión de ssh de Debian tiene por defecto "
+#~ "ForwardX11 y ForwardAgent desactivadas."
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "Puede activar estas opciones para los servidores en los que confíe, en "
+#~ "los ficheros de configuración o con la opción -X en línea de comandos."
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr "Puede encontrar más detalles en /usr/share/doc/ssh/README.Debian."
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "Las claves ssh2 ya se incluyen en los ficheros de configuración"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "A partir de la versión 3, OpenSSH ya no utiliza ficheros diferentes para "
+#~ "las claves ssh1 y ssh2. Esto quiere decir que ya no son necesarios los "
+#~ "ficheros authorized_keys2 y known_hosts2, aunque aún se seguirán leyendo "
+#~ "para mantener compatibilidad hacia atrás."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "¿Quiere ejecutar el servidor sshd?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Este paquete contiene el cliente ssh y el servidor sshd."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Generalmente, el servidor de ssh (Secure Shell Server) se ejecuta para "
+#~ "permitir el acceso remoto mediante ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Si sólo está interesado en usar el cliente ssh en conexiones salientes "
+#~ "del sistema y no quiere acceder a él mediante ssh, entonces puede "
+#~ "desactivar sshd."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Las opciones de entorno para las claves, en desuso"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "Esta versión de OpenSSH tiene desactivada por defecto la opción de "
+#~ "entorno para las claves públicas, para evitar ciertos ataques (por "
+#~ "ejemplo, basados en LD_PRELOAD). Si utiliza esta opción en un fichero "
+#~ "authorized_keys, las claves implicadas no funcionarán hasta que borre la "
+#~ "opción."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Para volver a activar esta opción, escriba «PermitUserEnvironment yes» "
+#~ "en /etc/ssh/sshd_config al terminar la actualización, teniendo en cuenta "
+#~ "el aviso de la página de manual de sshd_config(5)."
+
+#~ msgid "Privilege separation"
+#~ msgstr "Separación de privilegios"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "La separación de privilegios está activa por defecto, por lo que si "
+#~ "decide desactivarla, tiene que añadir «UsePrivilegeSeparation no» al "
+#~ "fichero /etc/ssh/sshd_config."
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "Activar separación de privilegios"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "Esta versión de OpenSSH incluye una nueva opción de separación de "
+#~ "privilegios que reduce significativamente la cantidad de código que se "
+#~ "ejecuta como root, por lo que reduce el impacto de posibles agujeros de "
+#~ "seguridad en sshd."
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "Desafortunadamente, la separación de privilegios no funciona "
+#~ "correctamente con PAM. Cualquier módulo PAM que necesite ejecutarse como "
+#~ "root (como, por ejemplo, pam_mkhomedir) y la autenticación interactiva "
+#~ "PAM con teclado no funcionarán."
+
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "Puesto que ha elegido crear automáticamente el fichero sshd_config, puede "
+#~ "decidir ahora si quiere activar la opción de separación de privilegios. A "
+#~ "menos que necesite usar ciertas características de PAM que no funcionan "
+#~ "con esta opción, debería responder sí a esta pregunta."
+
+#~ msgid ""
+#~ "NB! If you are running a 2.0 series Linux kernel, then privilege "
+#~ "separation will not work at all, and your sshd will fail to start unless "
+#~ "you explicitly turn privilege separation off."
+#~ msgstr ""
+#~ "Nota: Si utiliza un núcleo Linux 2.0, la separación de privilegios "
+#~ "fallará estrepitosamente y sshd no funcionará a no ser que la desactive."
diff --git a/debian/po/fi.po b/debian/po/fi.po
new file mode 100644
index 000000000..9ccc90e0f
--- /dev/null
+++ b/debian/po/fi.po
@@ -0,0 +1,348 @@
+# translation of fi.po to Finnish
+# openssh translation
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+# Matti Pöllä <mpo@iki.fi>, 2004-2005.
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2005-04-08 22:15+0300\n"
+"Last-Translator: Matti Pöllä <mpo@iki.fi>\n"
+"Language-Team: Finnish <debian-l10n-finnish@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Luo uusi asetustiedosto"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Tämän OpenSSH-version käyttämän asetustiedoston muoto poikkeaa \n"
+"huomattavasti Debian \"Potato\":n mukana toimitetusta versiosta, jota olet \n"
+"päivittämässä. Uusi asetustiedosto (/etc/ssh/sshd.config) voidaan \n"
+"luoda nyt. Uudet asetukset toimivat uuden palvelinversion kanssa, mutta \n"
+"vanhaan versioon itse tehdyt mukautukset menetetään."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Huomaa, että uudessa asetustiedostossa muuttujalla \"PermitRootLogin\" \n"
+"on arvo \"yes\" (tarkoittaen, että kuka tahansa pääkäyttäjän salasanan "
+"tietävä \n"
+"voi kirjautua suoraan ssh:n avulla pääkäyttäjänä). Paketin ylläpitäjän "
+"mielestä \n"
+"tämä on sopiva oletusarvo (lisätietoa tiedostossa README.Debian), mutta "
+"tämän \n"
+"voi halutessaan muuttaa arvoon \"no\" muokkaamalla tiedostoa sshd_config."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr "Uuden asetustiedoston luominen on erittäin suositeltavaa."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "Haluatko jatkaa (ja mahdollisesti lopettaa aktiiviset ssh-istunnot)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Asennettu versio tiedostosta /etc/init.d/ssh lopettaa todennäköisesti "
+"kaikki \n"
+"käynnissä olevat sshd-prosessit. Jos teet tätä päivitystä ssh-yhteyden "
+"yli, \n"
+"tämä on Huono Juttu(tm)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Voit korjata tämän lisäämällä \"--pidfile /var/run/sshd.pid\" tiedoston \n"
+"stop-osion start-stop-daemon -riville."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Varoitus: rsh-palvelin on asennettu --- tämä ei liene hyvä idea"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Rsh-palvelimen pitäminen vie pohjan turvallisuudelta, jota todennäköisesti \n"
+"halusit asentamalla ssh:n. Paketin poistaminen on suositeltavaa."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Varoitus: telnetd on asennettu --- tämä ei liene hyvä idea"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"On suositeltavaa joko poistaa telnetd-paketti (jos telnet-yhteyksien "
+"tarjoaminen \n"
+"ei ole tarpeellista) tai asentaa paketti telnetd-ssl, jotta salaamattomia \n"
+"käyttäjätunnuksia/salasanoja ja istunnon tietoja ei lähetettäisi verkon yli."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Varoitus: sinun tulee luoda uusi konekohtainen avain (host key)"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Olemassa oleva tiedosto /etc/ssh/ssh_host_key on salattu \n"
+"IDEA-algoritmilla. OpenSSH ei voi käsitellä tätä konekohtaista "
+"avaintiedostoa, \n"
+"eikä vanhan (ei-vapaan) SSH-asennuksen ssh-keygen-ohjelmaa löydy."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Uuden konekohtaisen avaimen (host key) luominen on tarpeen."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr "Poista käytöstä haaste-vaste -autentikointi"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"Käytössä olevassa OpenSSH-konfiguraatiossa salasana-autentikointi\n"
+"näyttää olevan poissa käytöstä. Estääksesi kirjautumiset salasanaa\n"
+"käyttäen (esim. salliaksesi kirjautumisen vain julkista avainta\n"
+"käyttäen), uusissa OpenSSH-versioissa haaste-vaste -autentikointi\n"
+"tulee poistaa käytöstä, tai muutoin varmistaa, että PAM-konfiguraatio\n"
+"ei salli Unix-salasanatiedostoon perustuvaa autentikointia."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Jos poistat käytöstä haaste-vaste -pohjaisen autentikoinnin, käyttäjät\n"
+"eivät voi kirjautua salasanaa käyttäen. Jos jätät sen päälle (oletus),\n"
+"asetuksella \"PasswordAuthentication no\" ei ole vaikutusta, ellet muuta\n"
+"myös PAM-asetuksia tiedostossa /etc/pam.d/ssh."
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "Haluatko, että ssh-keysign asennetaan SUID root -oikeuksin?"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr "Voit valinnaisesti asentaa ssh-keysign-apuohjelman SUID-bitillä."
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "Jos SUID on päällä, voit käyttää SSH-protokollan version 2 "
+#~ "konekohtaista \n"
+#~ "todennusta."
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "Jos olet epävarma, SUID-bitin käyttämistä suositellaan. Jos se "
+#~ "aiheuttaa \n"
+#~ "ongelmia, voit myöhemmin muuttaa mielesi komennolla \"dpkg-reconfigure ssh"
+#~ "\"."
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "Salli ainoastaan SSH-protokollan versio 2"
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "Tämä OpenSSH:n versio tukee ssh-protokollan versiota 2, joka on "
+#~ "huomattavasti \n"
+#~ "turvallisempi. Protokollan ykkösversion käytöstä poistamista "
+#~ "suositellaan, mutta \n"
+#~ "se voi aiheuttaa toiminnan hitautta pienitehoisissa koneissa ja estää "
+#~ "yhteyden \n"
+#~ "ottamisen vanhemmilla asiakasohjelmilla. (Tämä koskee mm. Debian \"potaton"
+#~ "\":n \n"
+#~ "mukana toimitettua ssh-asiakasohjelmaa.)"
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "Huomaa myös, että version 1 kanssa käytetyt avaimet ovat erilaisia, "
+#~ "joten \n"
+#~ "et voi käyttää niitä, jos sallit yhteydet vain versiolla 2."
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "Jos muutat myöhemmin mielesi tämän asetuksen suhteen, tiedostossa \n"
+#~ "README.Debian on ohjeet tiedoston sshd_config muokkaamiseen."
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "ssh2-avaimet yhdistetty asetustiedostoissa"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "OpenSSH:n versio 3 ei enää käytä erillisiä tiedostoja ssh1- ja ssh2-"
+#~ "avaimille. \n"
+#~ "Tästä johtuen tiedostoja authorized_keys2 ja known_hosts2 ei enää "
+#~ "tarvita. \n"
+#~ "Tiedostot silti luetaan, jotta yhteensopivuus vanhempiin versioihin "
+#~ "säilyy."
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr ""
+#~ "HUOMAA: X11:n ja valtuuksien (Authorization) edelleenlähettäminen on \n"
+#~ "oletusarvoisesti pois käytöstä."
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "Turvallisuussyistä Debianin ssh:ssa muuttujilla ForwardX11 ja \n"
+#~ "ForwardAgent on oletuksena arvo \"off\"."
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "Voit sallia sen luotetuille palvelimille joko asetustiedostossa tai\n"
+#~ "komentorivillä käyttämällä -X -valitsinta."
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr "Lisätietoja tiedostossa /usr/share/doc/ssh/README.Debian"
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Haluatko ajaa sshd-palvelinta?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Tämä paketti sisältää ssh-asiakasohjelman ja sshd-palvelimen."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Normaalisti sshd-palvelinta käytetään ssh-etäyhteyksien tarjoamiseen."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Jos haluat ottaa ssh-yhteyksiä vain ulos tältä koneelta etkä halua "
+#~ "ottaa \n"
+#~ "tähän koneeseen ssh-yhteyksiä muualta, voit poistaa sshd:n käytöstä."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Avaimien ympäristövalitsimia ei enää käytetä"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "Tässä OpenSSH-versiossa julkisten avaimien ympäristövalitsin on poissa \n"
+#~ "käytöstä, jotta tietynlaisilta hyökkäyksiltä vältyttäisiin (esim. "
+#~ "LD_PRELOAD). \n"
+#~ "Jos käytät tätä valitsinta authorized_keys-tiedostossa, huomioi, että \n"
+#~ "nämä avaimet eivät toimi niin kauan kuin valitsinta ei poisteta."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Ottaaksesi tämän toiminnon uudelleen käyttöön, lisää tiedostoon \n"
+#~ "/etc/ssh/sshd_config rivi \"PermitUserEnvironment yes\" kun päivitys on "
+#~ "valmis. \n"
+#~ "Huomioi varoitus man-ohjesivuilla sshd_config(5)."
diff --git a/debian/po/fr.po b/debian/po/fr.po
new file mode 100644
index 000000000..63b52d8a8
--- /dev/null
+++ b/debian/po/fr.po
@@ -0,0 +1,283 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh 3.8.1p1-8.sarge.1\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2004-10-13 22:39+0200\n"
+"Last-Translator: Denis Barbier <barbier@linuxfr.org>\n"
+"Language-Team: French <Debian-l10n-french@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Faut-il créer un nouveau fichier de configuration ?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Cette version d'OpenSSH utilise un fichier de configuration qui a fortement "
+"changé depuis la version contenue dans la distribution Debian « Potato », "
+"depuis laquelle vous semblez faire une mise à jour. Un nouveau fichier de "
+"configuration (/etc/ssh/sshd.config) qui fonctionnera avec la nouvelle "
+"version du serveur peut être créé, mais ne contiendra aucun des réglages que "
+"vous aviez faits avec la version précédente."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Veuillez noter que ce nouveau fichier de configuration positionnera la "
+"valeur de « PermitRootLogin » à « yes » (ce qui signifie que quiconque "
+"connaissant le mot de passe du superutilisateur peut se connecter en tant "
+"que tel sur la machine). Le responsable du paquet pense que c'est là un "
+"comportement par défaut normal (lisez README.Debian pour plus "
+"d'informations), mais vous pouvez toujours modifier le fichier sshd_config "
+"et changer cela."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Il est fortement recommandé de créer un nouveau fichier de configuration."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+"Voulez-vous continuer (et risquer de rompre les sessions SSH actives) ?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"La version de /etc/init.d/ssh que vous venez d'installer va "
+"vraisemblablement interrompre toutes les instances de sshd en cours. Si vous "
+"êtes en train de faire cette mise à niveau à l'aide de SSH, ce serait "
+"regrettable."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Vous pouvez corriger cela en ajoutant dans /etc/init.d/ssh « --pidfile /var/"
+"run/sshd.pid » à la ligne « start-stop-daemon » dans la section « stop » du "
+"fichier."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Rsh-server installé : paquet déconseillé"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Avoir un serveur rsh installé affaiblit la sécurité que vous vouliez "
+"probablement obtenir en installant SSH. Il est conseillé de supprimer ce "
+"paquet."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Telnetd installé : paquet déconseillé"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Vous devriez soit enlever le paquet telnetd (si ce service n'est pas "
+"nécessaire), soit le remplacer par le paquet telnetd-ssl pour qu'il y ait au "
+"moins une chance que les sessions telnet soient chiffrées et que les mots de "
+"passe et noms d'utilisateurs ne passent pas en clair sur le réseau."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Nouvelle clé d'hôte nécessaire"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Un ancien fichier /etc/ssh/ssh_host_key, chiffré avec IDEA, est actuellement "
+"utilisé. OpenSSH ne peut utiliser ce fichier de clé, et l'utilitaire ssh-"
+"keygen de l'installation précédente (non libre) de SSH n'a pas été trouvé."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Vous devez générer une nouvelle clé d'hôte."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr "Faut-il désactiver l'authentification par défi-réponse ?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"L'authentification par mots de passe semble être désactivée dans la "
+"configuration actuelle de votre serveur OpenSSH. Afin de vraiment empêcher "
+"les utilisateurs de se connecter avec un mot de passe (par exemple en "
+"n'autorisant que l'authentification par clé publique), vous devez aussi "
+"désactiver l'authentification par défi-réponse dans les versions récentes "
+"d'OpenSSH, ou alors vous assurer que votre configuration de PAM n'autorise "
+"pas l'authentification avec le fichier de mots de passe."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Si vous désactivez l'authentification par défi-réponse, alors les "
+"utilisateurs ne pourront pas se connecter en entrant un mot de passe. Si "
+"vous la laissez active (ce qui est le défaut), alors l'option "
+"« PasswordAuthentication no » n'aura d'effet que si vous ajustez aussi la "
+"configuration de PAM dans /etc/pam.d/ssh."
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "Faut-il installer ssh-keysign avec le bit SETUID activé ?"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr "Vous pouvez installer ssh-keysign avec le bit SETUID activé."
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "Si vous choisissez cette option, vous permettrez l'authentification basée "
+#~ "sur les hôtes, disponible dans la version 2 du protocole SSH."
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "Dans le doute, vous devriez l'installer avec le bit SETUID activé. Si "
+#~ "cela vous pose des problèmes, vous pourrez revenir sur votre décision "
+#~ "avec « dpkg-reconfigure ssh »."
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "Faut-il autoriser uniquement la version 2 du protocole SSH ?"
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "Cette version d'OpenSSH gère la version 2 du protocole SSH, qui est bien "
+#~ "plus sûre. Désactiver la version 1 est recommandé, cependant cela peut "
+#~ "ralentir les machines peu puissantes et pourrait empêcher ceux qui "
+#~ "utilisent de vieilles versions de la partie cliente de se connecter (le "
+#~ "client ssh de la distribution Debian « Potato » en fait partie)."
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "De plus, les clés utilisées par la version 1 du protocole sont "
+#~ "différentes et vous ne pourrez pas les utiliser si vous n'autorisez que "
+#~ "les connexions utilisant la version 2 du protocole."
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "Si vous changez d'avis ultérieurement et décidez de modifier ce réglage, "
+#~ "les instructions fournies dans le fichier README.Debian vous indiquent "
+#~ "comment modifier le fichier sshd_config."
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr ""
+#~ "Suivi de session X11 et d'agent d'autorisation désactivés par défaut."
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "Pour des raisons de sécurité, la version Debian de ssh positionne les "
+#~ "options ForwardX11 et ForwardAgent à « Off » par défaut."
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "Vous pouvez activer ces options pour les serveurs en qui vous avez "
+#~ "confiance, soit dans un des fichiers de configuration, soit avec l'option "
+#~ "-X de la ligne de commande."
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr ""
+#~ "Vous trouverez plus d'informations dans /usr/share/doc/ssh/README.Debian."
diff --git a/debian/po/gl.po b/debian/po/gl.po
new file mode 100644
index 000000000..6bcd11ac7
--- /dev/null
+++ b/debian/po/gl.po
@@ -0,0 +1,200 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2006-04-07 11:00+0200\n"
+"Last-Translator: Jacobo Tarrio <jtarrio@debian.org>\n"
+"Language-Team: Galician <trasno@ceu.fi.udc.es>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Xerar un novo ficheiro de configuración"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Esta versión de OpenSSH ten un ficheiro de configuración que cambiou moito "
+"con respecto á versión que se subministrou con Debian \"Potato\", desde a "
+"que semella que se está a actualizar. Pódeselle xerar agora un novo ficheiro "
+"de configuración (/etc/ssh/sshd.config) que ha funcionar coa nova versión do "
+"servidor, pero que non ha conter ningunha personalización que teña feito na "
+"versión antiga."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Teña en conta que este ficheiro de configuración novo ha estabrecer o valor "
+"de \"PermitRootLogin\" a \"yes\", o que significa que calquera que coñeza o "
+"contrasinal do administrador ha poder conectarse directamente coma \"root\". "
+"Na opinión do mantedor este é o valor por defecto correcto (consulte README."
+"Debian para ver máis detalles), pero sempre se pode editar sshd_config e "
+"poñelo a \"no\" se quere."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr "Recoméndse que permita xerar un novo ficheiro de configuración."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "¿Quere continuar (e arriscarse a que as sesións ssh activas morran)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"É posible que a versión de /etc/init.d/ssh que instalou vaia matar as "
+"instancias de sshd en execución. Se está a facer esta actualización por unha "
+"sesión ssh isto podería ser Algo Malo."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Pode arranxalo engadindo \"--pidfile /var/run/sshd.pid\" á liña start-stop-"
+"daemon da sección stop do ficheiro."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"Aviso: rsh-server está instalado --- seguramente non sexa unha boa idea"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"ao ter rsh-server instalado pérdese a seguridade que probablemente pretendía "
+"obter ao instalar ssh. Recoméndase que se desinstale ese paquete."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Aviso: telnetd está instalado --- seguramente non sexa unha boa idea"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Recoméndase que elimine o paquete telnetd (se non precisa de fornecer acceso "
+"por telnet) ou instale telnetd-ssl para que exista alomenos algunha "
+"posibilidade de que as sesións telnet non envíen información de usuario/"
+"contrasinal e das sesións sen cifrar pola rede."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Aviso: ten que crear unha nove chave de servidor"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Hai un ficheiro /etc/ssh/ssh_host_key antigo cifrado con IDEA. OpenSSH non "
+"pode xestionar este ficheiro de chave do servidor e non se pode atopar a "
+"utilidade ssh-keygen da instalación de SSH antiga (non libre)."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Ha ter que xerar unha nova chave de servidor."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr "¿Desactivar a autenticación por desafío-resposta?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"Semella que a autenticación por contrasinal está desactivada na "
+"configuración actual do servidor de OpenSSH. Para evitar que os usuarios se "
+"conecten empregando contrasinais (probablemente empregando no seu canto "
+"autenticación por clave pública) coas versións recentes de OpenSSH ten que "
+"desactivar a autenticación por desafío-resposta ou asegurarse de que a súa "
+"configuración de PAM non permite a autenticación por ficheiro de "
+"contrasinais de Unix."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Se desactiva a autenticación por desafío-resposta, os usuarios non han poder "
+"conectarse empregando contrasinais. Se a deixa activada (a resposta por "
+"defecto) a opción \"PasswordAuthentication no\" non ha ter ningún efecto "
+"útil a menos que tamén axuste a súa configuración de PAM en /etc/pam.d/ssh."
diff --git a/debian/po/it.po b/debian/po/it.po
new file mode 100644
index 000000000..e57499f1b
--- /dev/null
+++ b/debian/po/it.po
@@ -0,0 +1,201 @@
+# openssh po-debconf translation to italian
+# Copyright (C) 2006 Software in the Public Interest
+# This file is distributed under the same license as the openssh package.
+# Luca Monducci <luca.mo@tiscali.it>, 2006.
+# Renato Gini <rgini@openlabs.it>, 2003 - 2005
+# 
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh italian debconf templates\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2006-04-01 11:53+0200\n"
+"Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n"
+"Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Generare un nuovo file di configurazione"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Questa versione di OpenSSH contiene un file di configurazione "
+"significativamente modificato rispetto a quello distribuito in Debian "
+"\"Potato\", che sembra essere quello che si sta aggiornando. È ora possibile "
+"generare automaticamente un nuovo file di configurazione (/etc/ssh/sshd."
+"config) che funzionerà con la nuova versione del server, ma non conterrà "
+"nessuna delle personalizzazioni apportate nella precedente versione."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"N.B.: questo nuovo file di configurazione imposterà il valore di "
+"\"PermitRootLogin\" a \"yes\" (che significa che chiunque conosca la "
+"password dell'account root potrà collegarsi tramite ssh direttamente come "
+"root). È opinione del manutentore del pacchetto che questo sia il corretto "
+"valore predefinito (vedere README.Debian per ulteriori dettagli) ma, se si "
+"desidera, è sempre possibile modificare il file sshd_config e impostare il "
+"valore a \"no\"."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"È fortemente raccomandata la generazione automatica di un nuovo file di "
+"configurazione."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+"Si desidera continuare (e rischiare di terminare le sessioni ssh attive)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"La versione di /etc/init.d/ssh attualmente installata probabilmente "
+"terminerà tutte le istanze di sshd attive. Se si sta effettuando questo "
+"aggiornamento tramite una sessione ssh, questo potrebbe causare un "
+"comportamento imprevedibile."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"È possibile correggere ciò aggiungendo «--pidfile /var/run/sshd.pid» alla "
+"riga \"start-stop-daemon\" nella sezione \"stop\" del file."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"Attenzione: rsh-server è installato --- probabilmente non è una buona idea"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"avere rsh-server installato mina la sicurezza che probabilmente si voleva "
+"ottenere installando ssh. È consigliabile rimuovere il pacchetto."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr ""
+"Attenzione: telnetd è installato --- probabilmente non è una buona idea"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"È consigliabile rimuovere il pacchetto telnetd (se non è proprio necessario "
+"offrire l'accesso via telnet) o installare telnetd-ssl per evitare che ci "
+"sia qualche possibilità che la sessione telnet invii sulla rete login/"
+"password e informazioni di sessione non criptate."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Attenzione: è necessario creare una nuova chiave host"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"C'è una vecchio file /etc/ssh/ssh_host_key, che è criptato con IDEA. "
+"OpenSSH non è in grado di gestire questo file di chiave host e non è "
+"presente il programma (non-free) di utilità ssh-keygen dalla precedente "
+"installazione di SSH ."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Sarà necessario generare una nuova chiave host."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr "Disabilitare l'autenticazione interattiva?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"Dalla configurazione attuale del server OpenSSH sembra che l'autenticazione "
+"tramite password sia disabilitata. Con le versioni più recenti di OpenSSH "
+"per impedire l'accesso degli utenti al sistema con la password (per esempio "
+"l'accesso deve essere possibile solo tramite chiavi pubbliche) si deve "
+"disabilitare l'autenticazione interattiva oppure si deve verificare che "
+"PAM sia la configurato in modo da a non consentire l'autenticazione tramite "
+"password."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Se l'autenticazione interattiva è disabilitata gli utenti non possono "
+"effettuare l'accesso al sistema con la password. Invece se, come previsto "
+"dalla configurazione predefinita, è abilitata allora l'opzione "
+"«PasswordAuthentication no» non ha effetto fino a quando non si interviene "
+"anche sulla configurazione di PAM in /etc/pam.d/ssh."
diff --git a/debian/po/ja.po b/debian/po/ja.po
new file mode 100644
index 000000000..c8a93918e
--- /dev/null
+++ b/debian/po/ja.po
@@ -0,0 +1,370 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2004-10-20 08:53+0900\n"
+"Last-Translator: Kenshi Muto <kmuto@debian.org>\n"
+"Language-Team: Japanese <debian-japanese@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=EUC-JP\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "¿·¤·¤¤ÀßÄê¥Õ¥¡¥¤¥ë¤òºî¤ê¤Þ¤¹"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"OpenSSH ¤Î¤³¤Î¥Ð¡¼¥¸¥ç¥ó¤Ï¡¢Debian 'Potato' ¤Ë´Þ¤Þ¤ì¤Æ¤¤¤ë¥Ð¡¼¥¸¥ç¥ó (¤¤¤Þ¡¢"
+"¤½¤Î¥Ð¡¼¥¸¥ç¥ó¤«¤é¤Î¥Ð¡¼¥¸¥ç¥ó¥¢¥Ã¥×¤ò»î¤ß¤Æ¤¤¤ë¤È¤³¤í) ¤«¤é¡¢ÀßÄê¥Õ¥¡¥¤¥ë¤¬"
+"ÂçÉý¤ËÊѲ½¤·¤Æ¤¤¤Þ¤¹¡£¤¤¤Þ¡¢¿·¤·¤¤¥Ð¡¼¥¸¥ç¥ó¤Î¥µ¡¼¥Ð¤Ç»È¤¦¤³¤È¤¬¤Ç¤­¤ë¿·¤·¤¤"
+"ÀßÄê¥Õ¥¡¥¤¥ë (/etc/ssh/sshd/config) ¤ò¼«Æ°À¸À®¤¹¤ë¤³¤È¤¬¤Ç¤­¤Þ¤¹¤¬¡¢¤½¤Î¥Õ¥¡"
+"¥¤¥ë¤Ï¡¢¸Å¤¤¥Ð¡¼¥¸¥ç¥ó¤ÎÀßÄê¥Õ¥¡¥¤¥ë¤Ë´Þ¤Þ¤ì¤ë¤¢¤Ê¤¿¤ÎÀßÄ꤬¤Þ¤Ã¤¿¤¯´Þ¤Þ¤ì¤Þ"
+"¤»¤ó¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"¤³¤Î¿·¤·¤¤ÀßÄê¥Õ¥¡¥¤¥ë¤Ï¡¢¡ÖPermitRootLogin¡×¤ò¡Öyes¡×¤ËÀßÄꤷ¤Þ¤¹ (¤Ä¤Þ¤ê¡¢"
+"root ¤Î¥Ñ¥¹¥ï¡¼¥É¤òÃΤäƤ¤¤ë¿Í¤Ê¤éï¤Ç¤âľÀÜ¥í¥°¥¤¥ó¤Ç¤­¤Þ¤¹)¡£¤³¤ì¤Ç¤è¤¤¡¢"
+"¤È¤¤¤¦¤Î¤¬¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤Î¥á¥ó¥Æ¥Ê¤Î°Õ¸«¤Ç¤¹¤¬ (¾Ü¤·¤¯¤Ï README.Debian ¤òÆɤó"
+"¤Ç¤¯¤À¤µ¤¤)¡¢sshd_config ¤òÊÔ½¸¤·¤Æ¡Öno¡×¤ËÀßÄꤹ¤ë¤³¤È¤â¤Ç¤­¤Þ¤¹¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr "¿·¤·¤¤ÀßÄê¥Õ¥¡¥¤¥ë¤ò¼«Æ°À¸À®¤¹¤ë¤³¤È¤ò¶¯¤¯¤ª´«¤á¤·¤Þ¤¹¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "³¤±¤Æ¤è¤¤¤Ç¤¹¤« (ÀܳÃæ¤Î ssh ¥»¥Ã¥·¥ç¥ó¤¬ÀÚ¤ì¤ë¤«¤â¤·¤ì¤Þ¤»¤ó)"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"¤¤¤Þ¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿ /etc/init.d/ssh ¤Ï¡¢¤ª¤½¤é¤¯¼Â¹ÔÃæ¤Î sshd ¤ò¤¹¤Ù¤ÆÄä»ß¤µ"
+"¤»¤Þ¤¹¡£¤³¤Î¥Ð¡¼¥¸¥ç¥ó¥¢¥Ã¥×¤ò ssh ¥»¥Ã¥·¥ç¥ó¤òÍѤ¤¤Æ¹Ô¤¦¤Î¤Ï´Ö°ã¤Ã¤¿¤ä¤ê¤«¤¿"
+"¤Ç¤¹¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"¤³¤Î¾õ¶·¤ò½¤Àµ¤¹¤ë¤Ë¤Ï¡¢/etc/init.d/ssh ¤Î stop ¥»¥¯¥·¥ç¥ó¤Î start-stop-"
+"daemon ¤Î¹Ô¤Ë¡Ö--pidfile /var/run/sshd.pid¡×¤ÈÄɲä·¤Þ¤¹¡£"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"·Ù¹ð: rsh-server ¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¤¤¤Þ¤¹¡£¤¿¤Ö¤óÎɤ¤¹Í¤¨¤Ç¤Ï¤¢¤ê¤Þ¤»¤ó"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"rsh-server ¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¤¤¤ë¤È¡¢¤¢¤Ê¤¿¤¬ ssh ¤Ë¤è¤Ã¤ÆÆÀ¤¿¤¤¤È»×¤Ã¤Æ¤¤"
+"¤ë¤Ç¤¢¤í¤¦¥»¥­¥å¥ê¥Æ¥£¤¬Â»¤Ê¤ï¤ì¤Þ¤¹¡£¤½¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¥¢¥ó¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤³"
+"¤È¤ò¤ª´«¤á¤·¤Þ¤¹¡£"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "·Ù¹ð: telnetd ¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¤¤¤Þ¤¹¡£¤¿¤Ö¤óÎɤ¤¹Í¤¨¤Ç¤Ï¤¢¤ê¤Þ¤»¤ó"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"(¤â¤· telnet ¥¢¥¯¥»¥¹¤òÄ󶡤·¤¿¤¤¤È»×¤Ã¤Æ¤¤¤Ê¤¤¤Î¤Ç¤·¤¿¤é) telnetd ¥Ñ¥Ã¥±¡¼¥¸"
+"¤ò¥¢¥ó¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤«¡¢¤Þ¤¿¤Ï¡¢telnetd-ssh ¥Ñ¥Ã¥±¡¼¥¸¤ò ¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¾¯"
+"¤Ê¤¯¤È¤â¥Í¥Ã¥È¥ï¡¼¥¯¾å¤ò°Å¹æ²½¤µ¤ì¤Æ¤¤¤Ê¤¤¥æ¡¼¥¶Ì¾¤ä¥Ñ¥¹¥ï¡¼¥É¤ä¥»¥Ã¥·¥ç¥ó¾ð"
+"Êó¤¬Î®¤ì¤Ê¤¤¤è¤¦¤Ë¤¹¤ë¤³¤È¤ò¤ª´«¤á¤·¤Þ¤¹¡£"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "·Ù¹ð: ¿·¤·¤¤¥Û¥¹¥È¥­¡¼¤òºî¤é¤Ê¤¤¤È¤¤¤±¤Þ¤»¤ó"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"IDEA ¤Ç°Å¹æ²½¤µ¤ì¤¿¸Å¤¤¥­¡¼¤¬ /etc/ssh/ssh_host_key ¤Ë¤¢¤ê¤Þ¤¹¡£ OpenSSH ¤Ï¤³"
+"¤Î¥Û¥¹¥È¥­¡¼¥Õ¥¡¥¤¥ë¤ò°·¤¨¤Þ¤»¤ó¡£¤Þ¤¿¡¢º£¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¤¤¤ë¸Å¤¤ (¥Õ¥ê¡¼"
+"¤Ç¤Ï¤Ê¤¤) SSH ¤Ë¤Ï ssh-keygen ¥æ¡¼¥Æ¥£¥ê¥Æ¥£¤¬´Þ¤Þ¤ì¤Æ¤¤¤Þ¤»¤ó¡£"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "¿·¤·¤¤¥Û¥¹¥È¥­¡¼¤òºî¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr "¥Á¥ã¥ì¥ó¥¸-¥ì¥¹¥Ý¥ó¥¹Ç§¾Ú¤ò̵¸ú¤Ë¤·¤Þ¤¹¤«?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"¸½ºß¤Î OpenSSH ¥µ¡¼¥Ð¤ÎÀßÄê¤Ç¤Ï¥Ñ¥¹¥ï¡¼¥Éǧ¾Ú¤¬Ìµ¸ú¤Ë¤Ê¤Ã¤Æ¤¤¤ë¤è¤¦¤Ç¤¹¡£"
+"OpenSSH ¤ÎºÇ¶á¤Î¥Ð¡¼¥¸¥ç¥ó¤Ç¥Ñ¥¹¥ï¡¼¥É¤ò»È¤Ã¤Æ¥æ¡¼¥¶¤¬¥í¥°¥¤¥ó¤¹¤ë¤Î¤òËɤ° "
+"(¿ʬ¸ø³«¸°Ç§¾Ú¤À¤±¤òÂå¤ï¤ê¤Ë»È¤¦) ¤¿¤á¤Ë¤Ï¡¢¥Á¥ã¥ì¥ó¥¸-¥ì¥¹¥Ý¥ó¥¹Ç§¾Ú¤ò̵¸ú"
+"¤Ë¤¹¤ë¤«¡¢PAM ÀßÄê¤Ç Unix ¥Ñ¥¹¥ï¡¼¥É¥Õ¥¡¥¤¥ëǧ¾Ú¤òÀäÂФ˵ö²Ä¤·¤Ê¤¤¤è¤¦¤Ë¤¹¤ë"
+"ɬÍפ¬¤¢¤ê¤Þ¤¹¡£"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"¥Á¥ã¥ì¥ó¥¸-¥ì¥¹¥Ý¥ó¥¹Ç§¾Ú¤ò̵¸ú¤Ë¤¹¤ë¾ì¹ç¡¢¥æ¡¼¥¶¤Ï¥Ñ¥¹¥ï¡¼¥É¤ò»È¤Ã¤Æ¥í¥°¥¤¥ó"
+"¤Ç¤­¤Ê¤¯¤Ê¤ê¤Þ¤¹¡£Í­¸ú (¥Ç¥Õ¥©¥ë¥È) ¤Î¤Þ¤Þ¤Ë¤·¤Æ¤ª¤¯¤È¡¢/etc/pam.d/ssh ¤Ë¤¢"
+"¤ë PAM ÀßÄê¤òÄ´Àᤷ¤Ê¤¤¸Â¤ê¡¢'PasswordAuthentication no' ¥ª¥×¥·¥ç¥ó¤Ï¸ú²Ì¤ò»ý"
+"¤¿¤Ê¤¯¤Ê¤ê¤Þ¤¹¡£"
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "ssh-keysign ¤ò SUID root ¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¤«?"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr ""
+#~ "ssh-keysign ¥Ø¥ë¥Ñ¡¼¤ò¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ëºÝ¡¢SUID ¥Ó¥Ã¥È¤òÀßÄꤹ¤ë¤«¤·¤Ê¤¤¤«"
+#~ "¤òÁª¤Ö¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£"
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "ssh-keysign ¤ò SUID ¤ËÀßÄꤷ¤¿¾ì¹ç¡¢SSH ¥×¥í¥È¥³¥ë 2 ¤Î¥Û¥¹¥È¤Ë´ð¤Å¤¯Ç§¾Ú"
+#~ "¤ò»È¤¦¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£"
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "¤è¤¯Ê¬¤«¤é¤Ê¤¤¾ì¹ç¤Ï¡¢SUID ¤òÍ­¸ú¤Ë¤¹¤ë¤³¤È¤ò¤ª´«¤á¤·¤Þ¤¹¡£¤â¤· ÌäÂ꤬µ¯¤³"
+#~ "¤ì¤Ð¡¢dpkg-reconfigure ssh ¤ò¼Â¹Ô¤¹¤ë¤³¤È¤ÇÀßÄê¤òÊѹ¹¤¹¤ë¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£"
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "SSH ¥×¥í¥È¥³¥ë 2 ¤Î¤ß¤òµö²Ä¤·¤Þ¤¹"
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "OpenSSH ¤Î¤³¤Î¥Ð¡¼¥¸¥ç¥ó¤Ï¡¢¤º¤Ã¤È°ÂÁ´¤Ê¡¢ssh ¥×¥í¥È¥³¥ë¤Î¥Ð¡¼¥¸¥ç¥ó 2 ¤ò"
+#~ "¥µ¥Ý¡¼¥È¤·¤Æ¤¤¤Þ¤¹¡£ssh 1 ¤ò¶Ø»ß¤¹¤ë¤³¤È¤ò¤ª´«¤á¤·¤Þ¤¹¤¬¡¢ÃÙ¤¤¥Þ¥·¥ó¤Ç¤ÏÆ°"
+#~ "ºî¤¬ÃÙ¤¯¤Ê¤Ã¤¿¤ê¡¢¸Å¤¤¥¯¥é¥¤¥¢¥ó¥È¤«¤éÀܳ¤Ç¤­¤Ê¤¯¤Ê¤Ã¤¿¤ê¤·¤Þ¤¹ (\"potato"
+#~ "\" ¤Î ssh ¥¯¥é¥¤¥¢¥ó¥È¤âÀܳ¤Ç¤­¤Ê¤¯¤Ê¤ê¤Þ¤¹)¡£"
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "¤Þ¤¿¡¢¥×¥í¥È¥³¥ë 1 ¤Ç»È¤¦¥­¡¼¤Ï°Û¤Ê¤ë¤¿¤á¡¢¥×¥í¥È¥³¥ë 2 ¤òÍ­¸ú¤Ë¤·¤¿¤À¤±¤Ç"
+#~ "¤Ï¤½¤Î¥­¡¼¤ò»È¤¦¤³¤È¤¬¤Ç¤­¤Þ¤»¤ó¡£"
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "¤â¤·º£¸å¤¢¤Ê¤¿¤¬¹Í¤¨¤òÊѤ¨¤¿¤é¡¢README.Debian ¤òÆɤà¤È sshd_config ¤ò¤É¤Î"
+#~ "¤è¤¦¤ËÊѹ¹¤·¤¿¤é¤è¤¤¤«¤¬Ê¬¤«¤ê¤Þ¤¹¡£"
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr "Ãí°Õ: X11 ¤Èǧ¾Ú¤Î¥Õ¥©¥ï¡¼¥Ç¥£¥ó¥°¤Ï¥Ç¥Õ¥©¥ë¥È¤Ç¤Ï¶Ø»ß¤µ¤ì¤Þ¤¹"
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "¥»¥­¥å¥ê¥Æ¥£¾å¤ÎÍýͳ¤«¤é¡¢Debian ¤Î ssh ¤Ç¤Ï ForwardX11 ¤È ForwardAgent ¤Ï"
+#~ "¥Ç¥Õ¥©¥ë¥È¤Ç¤Ï¡Öoff¡×¤ËÀßÄꤵ¤ì¤Þ¤¹¡£"
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "ÀßÄê¥Õ¥¡¥¤¥ë¤ò»È¤Ã¤¿¤ê¡¢-X ¥³¥Þ¥ó¥É¥é¥¤¥ó¥ª¥×¥·¥ç¥ó¤ò»È¤Ã¤¿¤ê¤¹¤ë¤³¤È¤Ç¡¢"
+#~ "¿®ÍѤǤ­¤ë¥µ¡¼¥Ð¤ËÂФ·¤Æµö²Ä¤¹¤ë¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£"
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr "¾ÜºÙ¤Ï /usr/share/doc/ssh/README.Debian ¤òÆɤó¤Ç¤¯¤À¤µ¤¤¡£"
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "ssh2 ¥­¡¼¤ÏÀßÄê¥Õ¥¡¥¤¥ë¤ËÅý¹ç¤µ¤ì¤Þ¤¹"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "OpenSSH ¤Î¥Ð¡¼¥¸¥ç¥ó 3 ¤Ï¡¢ssh1 ¤È ssh2 ¤Î¥­¡¼¤Ë¸ÄÊ̤Υե¡¥¤¥ë¤ò»È¤¤¤Þ¤»"
+#~ "¤ó¡£¤Ä¤Þ¤ê¡¢authorized_keys2 ¥Õ¥¡¥¤¥ë¤È known_hosts2 ¥Õ¥¡¥¤¥ë¤Ï¤â¤Ï¤äÉÔÍ×"
+#~ "¤È¤Ê¤ê¤Þ¤·¤¿¡£¸åÊý¸ß´¹À­¤òÊݤĤ¿¤á¤Ë¤Ï¤³¤ì¤é¤Î¥Õ¥¡¥¤¥ë¤¬É¬ÍפǤ¹¡£"
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "sshd ¥µ¡¼¥Ð¤ò¼Â¹Ô¤·¤Þ¤¹¤«?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr ""
+#~ "¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤Ï¡¢ssh ¥¯¥é¥¤¥¢¥ó¥È¤È sshd ¥µ¡¼¥Ð¤ÎξÊý¤ò´Þ¤ó¤Ç¤¤¤Þ¤¹¡£"
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Ä̾sshd ¥»¥­¥å¥¢¥·¥§¥ë¥µ¡¼¥Ð¤Ï¡¢ssh ¤òÍѤ¤¤¿¥ê¥â¡¼¥È¤«¤é¤Î¥í¥°¥¤¥ó¤ò²Ä"
+#~ "ǽ¤Ë¤¹¤ë¤¿¤á¤Ë¼Â¹Ô¤·¤Þ¤¹¡£"
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "¤â¤· ssh ¥¯¥é¥¤¥¢¥ó¥È¤ò»È¤Ã¤Æ¤³¤Î¥Þ¥·¥ó¤«¤é¾¥Þ¥·¥ó¤Ø¤ÈÀܳ¤¹¤ë¤À¤±¤Ç¡¢¤³"
+#~ "¤Î¥Þ¥·¥ó¤Ø¤È ssh ¤ò»È¤Ã¤Æ¥í¥°¥¤¥ó¤·¤Ê¤¤¤Î¤Ç¤·¤¿¤é¡¢¤³¤³¤Ç sshd ¤ò¼Â¹Ô¤·¤Ê"
+#~ "¤¤¤Ç¤ª¤­¤Þ¤¹¡£"
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "¸°¤Î´Ä¶­¥ª¥×¥·¥ç¥ó¤Ï̵¸ú¤ËÀßÄꤵ¤ì¤Þ¤·¤¿"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "ËܥС¼¥¸¥ç¥ó¤Î OpenSSH ¤Ï¡¢¸ø³«¸°¤Î´Ä¶­¥ª¥×¥·¥ç¥ó¤ò¥Ç¥Õ¥©¥ë¥È¤Ç̵¸ú¤ËÀßÄê"
+#~ "¤·¤Æ¤¤¤Þ¤¹¡£LD_PRELOAD ¤Ê¤É¤Î¹¶·â¤òÈò¤±¤ë¤¿¤á¤Ç¤¹¡£¤â¤· authorized_keys "
+#~ "¥Õ¥¡¥¤¥ë¤Ç¤³¤Î¥ª¥×¥·¥ç¥ó¤ò»ÈÍѤ·¤Æ¤¤¤ë¾ì¹ç¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤ò½üµî¤·¤Ê¤¤¸Â¤ê"
+#~ "¤Ï¤½¤Î¸°¤ÏÍøÍѤǤ­¤Ê¤¤¤³¤È¤ËÃí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£"
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "¤³¤Î¥ª¥×¥·¥ç¥ó¤òºÆ¤ÓÍ­¸ú¤Ë¤¹¤ë¤Ë¤Ï¡¢¥¢¥Ã¥×¥°¥ì¡¼¥É½ªÎ»¸å¤Ë¡¢sshd_config"
+#~ "(5) ¥Þ¥Ë¥å¥¢¥ë¥Ú¡¼¥¸¤Î·Ù¹ð»ö¹à¤òÆɤó¤Ç¡¢ /etc/ssh/sshd_config ¥Õ¥¡¥¤¥ë¤Ë"
+#~ "¡ÖPermitUserEnvironment yes¡×¤ÈÀßÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
+
+#~ msgid "Privilege separation"
+#~ msgstr "Æø¢¤ÎʬΥ"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "Æø¢Ê¬Î¥¤Ï¥Ç¥Õ¥©¥ë¥È¤ÇÍ­¸ú¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£Ìµ¸ú¤Ë¤·¤¿¤¤¾ì¹ç¤Ï¡¢/etc/ssh/"
+#~ "sshd_conf ¤Ë¡ÖUsePrivilegeSeparation no¡×¤È¤¤¤¦¹Ô¤òÄɲ䷤Ƥ¯¤À¤µ¤¤¡£"
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "Æø¢Ê¬Î¥¤òÍ­¸ú¤Ë¤¹¤ë"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "ËܥС¼¥¸¥ç¥ó¤Î OpenSSH ¤Ï¡¢¿·¤·¤¤Æø¢Ê¬Î¥¥ª¥×¥·¥ç¥ó¤ò»ý¤Ã¤Æ¤¤¤Þ¤¹¡£ ¤³¤ì¤Ë"
+#~ "¤è¤Ã¤Æ¡¢root ¸¢¸Â¤Ç¼Â¹Ô¤µ¤ì¤ë¥³¡¼¥É¤ÎÎ̤òÂçÉý¤Ë¸º¤é¤¹¤³¤È¤¬¤Ç¤­¡¢sshd ¤Î¥»"
+#~ "¥­¥å¥ê¥Æ¥£¥Û¡¼¥ë¤Î±Æ¶Á¤ò¸º¤é¤¹¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£"
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "»ÄÇ°¤Ê¤³¤È¤Ë¡¢Æø¢Ê¬Î¥¤Ï PAM ¤Ë°­±Æ¶Á¤òÍ¿¤¨¤Þ¤¹¡£root ¤Ç¼Â¹Ô¤µ¤ì¤ë¤¹¤Ù¤Æ"
+#~ "¤Î PAM ¥»¥Ã¥·¥ç¥ó¥â¥¸¥å¡¼¥ë (¤¿¤È¤¨¤Ð pam_mkhomedir) ¤ÏÆ°¤«¤Ê¤¯¤Ê¤ê¤Þ¤¹¡£"
+#~ "¤Þ¤¿¡¢PAM ¥­¡¼¥Ü¡¼¥ÉÂÐÏÃŪǧ¾Ú¤âÆ°ºî¤·¤Ê¤¯¤Ê¤ê¤Þ¤¹¡£"
+
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "sshd_config ¥Õ¥¡¥¤¥ë¤òÀ¸À®¤¹¤ë¤³¤È¤òÁªÂò¤·¤¿¤Î¤Ç¡¢¤³¤³¤ÇÆø¢Ê¬Î¥¤òÍ­¸ú¤Ë¤¹"
+#~ "¤ë¤«¤·¤Ê¤¤¤«¤òÁªÂò¤Ç¤­¤Þ¤¹¡£¤³¤ÎÁªÂò¤ÇÆ°ºî¤·¤Ê¤¤ PAM µ¡Ç½¤ò»È¤¤¤¿¤¤¾ì¹ç°Ê"
+#~ "³°¤Ï¡¢¡Ö¤Ï¤¤¡×¤òÁª¤Ö¤Ù¤­¤Ç¤¹¡£"
diff --git a/debian/po/nl.po b/debian/po/nl.po
new file mode 100644
index 000000000..0c467e061
--- /dev/null
+++ b/debian/po/nl.po
@@ -0,0 +1,282 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh 3.6.1p2-9\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2004-10-28 23:21+0100\n"
+"Last-Translator: Bart Cornelis <cobaco@linux.be>\n"
+"Language-Team: debian-l10n-dutch <debian-l10n-dutch@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=iso-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Genereer het nieuwe configuratiebestand"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Deze versie van OpenSSH gebruikt een configuratiebestand dat sterk veranderd "
+"is ten opzichte van dat in Debian 'Potato' (waarvan u lijkt op te "
+"waardereren). Ik kan nu een nieuw, met de nieuwe serverversie werkend, "
+"configuratiebestand (/etc/ssh/sshd.config) voor u genereren. Dit "
+"gegenereerde bestand zal echter de aanpassingen die u wellicht gemaakt had "
+"niet overnemen."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Merk op dat dit nieuwe configuratiebestand de waarde van 'PermitRootLogin' "
+"op 'yes' zet (wat betekent dat iedereen die het root-wachtwoord kent via ssh "
+"rechstreeks als root kan aanmelden). Het is de mening van de pakketbeheerder "
+"dat dit de juiste defaultwaarde is (zie README.Debian.gz voor meer details). "
+"Indien u dit niet wenst kunt u sshd_config handmatig aanpassen en de waarde "
+"op 'no' zetten."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Het wordt ten zeerste aangeraden om mij het nieuwe configuratiebestand voor "
+"u te laten genereren."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "Wilt u verder gaan (waarbij u mogelijk actieve ssh sessies afschiet)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"De /etc/init.d/ssh versie die u geïnstalleerd hebt schiet waarschijnlijk "
+"alle lopende sshd-instanties af. Dit is Niet Goed wanneer u deze "
+"opwaardering via een ssh-sessie doet."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"U kunt dit repareren door \"--pidfile /var/run/sshd.pid\" toe te voegen aan "
+"de start-stop-daemon regel in de stop-sectie van het bestand."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"Waarschuwing: rsh-server is geïnstalleerd -- dit is waarschijnlijk geen goed "
+"idee"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"rsh-server geïnstalleerd hebben ondermijnt de beveiliging die u, "
+"waarschijnlijk, net probeerde te verkrijgen door ssh te installeren. We "
+"raden u aan om dat pakket te verwijderen."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr ""
+"Waarschuwing: telnetd is geïnstalleerd -- dit is waarschijnlijk geen goed "
+"idee"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Ik raad u aan om of het telnetd-pakket te verwijderen (indien u geen "
+"telnettoegang hoeft aan te bieden), of telnetd-ssl te installeren zodat er "
+"enige kans is dat telnetsessies geen onversleutelde gebruikersnaam/"
+"wachtwoord en sessie informatie over het netwerk versturen."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Waarschuwing: u dient een nieuwe computersleutel aan te maken"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Er is een oude IDEA-versleutelde /etc/ssh/ssh_host_key aanwezig. OpenSSH kan "
+"dit computersleutelbestand niet aan, en ik kan het ssh-keygen programma van "
+"de oude (niet-vrije) SSH installatie niet vinden."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Het zal nodig zijn om een nieuwe computersleutel te genereren"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr "Challenge-response-authenticatie deactiveren?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"Zo te zien is wachtwoord-authenticatie momenteel gedeactiveert in uw OpenSSH-"
+"serverconfiguratie. Om te voorkomen dat gebruikers met recente versies van "
+"OpenSSH inloggen met behulp van wachtwoorden (mogelijk door in plaats "
+"daarvan enkel publieke-sleutel authenticatie te gebruiken) dient challenge-"
+"response-authenticatie gedeactiveerd te woren. Zoniet dient u ervoor te "
+"zorgen dat uw PAM-configuratie geen Unix 'password'-bestand-authenticatie "
+"toe laat."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Wanneer u challenge-response-authenticatie deactiveerd kunnen gebruikers "
+"niet meer inloggen met behulp van wachtwoorden. Als u het geactiveerd laat "
+"(de standaarwaarde) zal de 'PasswordAuthentication no' optie geen (nuttig) "
+"effect hebben tenzij u ook de PAM-configuratie aanpast in /etc/pam.d/ssh."
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "Wilt u ssh-keysign met SUID root installeren?"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr ""
+#~ "U heeft de mogelijkheid om het ssh-keysign hulpprogramma te installeren "
+#~ "met de SUID-bit aan."
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "Wanneer u de SUID-bit voor ssh-keysign aanzet, krijgt u de mogelijkheid "
+#~ "om de computer-gebaseerde authenticatie van het versie 2 SSH-protocol te "
+#~ "gebruiken."
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "Bij twijfel kunt u best met SUID installeren. Indien dit problemen "
+#~ "veroorzaakt kunt u dit altijd later nog veranderen door \"dpkg-"
+#~ "reconfigure ssh\" uit te voeren"
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "Laat enkel versie 2 van het SSH-protocol toe."
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "Deze versie van OpenSSH ondersteunt de veiligere versie 2 van het ssh-"
+#~ "protocol. Uitschakelen van ssh versie 1 wordt aangemoedigd, hoewel dit "
+#~ "dingen op zwakkere machines zal vertragen, en mogelijk verbindingen van "
+#~ "oudere clients (b.v. de ssh-client uit \"potato\") onmogelijk maakt."
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "Houd er ook rekening mee dat de sleutels gebruikt voor protocolversie 1 "
+#~ "verschillend zijn, waardoor u deze niet kunt gebruiken indien u enkel "
+#~ "protocolversie 2 verbindingen toelaat."
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "Instructies over wat te veranderen in sshd_config om deze instelling "
+#~ "later nog te veranderen, vindt u in /usr/share/doc/ssh/README.Debian.gz."
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr ""
+#~ "OPMERKING: Doorsturen van X11 en Authorisatie is standaard uitgeschakeld."
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "Om beveiligingsredenen zijn, in de Debian versie van ssh, ForwardX11 en "
+#~ "ForwardAgent standaard uitgeschakeld."
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "U kunt dit, voor vertrouwde servers, inschakelen in de "
+#~ "configuratiebestanden, of met de -X commandoregeloptie."
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr "Meer details vindt u in /usr/share/doc/ssh/README.Debian.gz"
diff --git a/debian/po/pl.po b/debian/po/pl.po
new file mode 100644
index 000000000..a422e51a2
--- /dev/null
+++ b/debian/po/pl.po
@@ -0,0 +1,385 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2004-04-08 18:28+0200\n"
+"Last-Translator: Emil Nowak <emil5@go2.pl>\n"
+"Language-Team: Polish <translation-team-pl@lists.sourceforge.net>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-2\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Wygeneruj nowy plik konfiguracyjny"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"W tej wersji OpenSSH zmieni³ siê plik konfiguracyjny w stosunku do wersji "
+"dostarczanej z Debianem 'Potato', któr± zdajesz siê aktualizowaæ. Mogê teraz "
+"wygenerowaæ nowy plik konfiguracyjny (/etc/ssh/sshd.config), który bêdzie "
+"dzia³a³ z now± wersj± serwera, ale nie bêdzie zawiera³ ¿adnych dokonanych "
+"przez ciebie w starej wersji zmian."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Zauwa¿ proszê, ¿e nowy plik konfiguracyjny bêdzie ustawia³ warto¶æ opcji "
+"'PermitRootLogin' na 'tak' (co oznacza, ¿e ka¿dy kto zna has³o root'a mo¿e "
+"zdalnie zalogowaæ siê przez ssh jako root). W opinii opiekuna pakietu to "
+"jest poprawna warto¶æ domy¶lna (szczegó³y w README.Debian), ale mo¿esz sobie "
+"wyedytowaæ sshd_config i ustawiæ tê opcjê na 'nie' je¶li siê z t± opini± nie "
+"zgadzasz."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Jest bardzo wskazane aby¶ pozwoli³ mi wygenerowaæ nowy plik konfiguracyjny."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "Czy chcesz kontynuowaæ (i ryzykowaæ przerwaniem aktywnych sesji ssh) ?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Zainstalowana w³a¶nie wersja /etc/init.d/ssh mo¿e zabiæ wszystkie dzia³aj±ce "
+"obecnie kopie sshd. Je¶li wykonujesz t± aktualizacjê przez ssh, to by³aby "
+"Z³a Rzecz(tm)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Mo¿esz to naprawiæ dodaj±c \"--pidfile /var/run/sshd.pid\" do linijki start-"
+"stop-daemon w sekcji stop tego pliku."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"Uwaga: serwer rsh jest zainstalowany --- prawdopodobnie nienajlepszy pomys³"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Posiadanie zainstalowanego serwera rsh podminowuje zabezpieczenia, które "
+"prawdopodobnie starasz siê uzyskaæ instaluj±c ssh. Radzi³bym usun±æ ten "
+"pakiet."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr ""
+"Uwaga: telnetd jest zainstalowany --- prawdopodobnie nienajlepszy pomys³"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Radzi³bym albo usun±æ pakiet telnetd (je¶li nie potrzebujesz koniecznie "
+"udostêpniaæ telnet'a) albo zainstalowaæ telnetd-ssl aby by³a choæ szansza, "
+"¿e sesje telnet nie bêd± przesy³aæ niezaszyfrowanego loginu/has³a oraz "
+"danych sesji przez sieæ."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Uwaga: musisz utworzyæ nowy klucz hosta"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Istnieje stary /etc/ssh/ssh_host_key, który jest zaszyfrowany przez IDEA. "
+"OpenSSH nie umie korzystaæ z tak zaszyfrowanego klucza, a nie mo¿e znale¼æ "
+"polecenia ssh-keygen ze starego SSH (non-free)."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Bêdziesz musia³ wygenerowaæ nowy klucz hosta."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "Czy chcesz aby ssh-keysign by³ zainstalowany jako SUID root?"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr ""
+#~ "Masz mo¿liwo¶æ zainstalowania pomocniczego programu ssh-keysign z "
+#~ "w³±czonym bitem SETUID."
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "Je¶li uczynisz ssh-keysign SUIDowym, bêdziesz móg³ u¿ywaæ opartej na "
+#~ "hostach autoryzacji drugiej wersji protoko³u SSH."
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "Je¶li masz w±tpliwo¶ci, radzê zainstalowaæ go z SUIDem. Je¶li to sprawia "
+#~ "problemy, mo¿esz zmieniæ swoje zdanie uruchamiaj±c pó¼niej polecenie: "
+#~ "dpkg-reconfigure ssh"
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "Zezwalaj wy³±cznie na wersjê 2 protoko³u SSH"
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "Ta wersja OpenSSH wspiera drug± wersjê protoko³u ssh, która jest znacznie "
+#~ "bardziej bezpieczna. Wy³±czenie ssh 1 jest zalecane, choæ spowalnia to "
+#~ "dzia³anie na starych maszynach i mo¿e uniemo¿liwiæ po³±czenie starszym "
+#~ "wersjom klientów (dotyczy to np. klienta ssh do³±czanego do \"potato\")."
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "Ponadto, zauwa¿ proszê, ¿e klucze u¿ywane przez protokó³ 1 s± inne, wiêc "
+#~ "nie bêdziesz móg³ ich u¿ywaæ je¶li zezwolisz na korzystanie wy³±cznie z "
+#~ "wersji 2 protoko³u."
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "Je¶li pó¼niej zmienisz zdanie co do tego ustawienia, to instrukcje co "
+#~ "zmieniæ w sshd_config znajduj± siê w README.Debian."
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr ""
+#~ "UWAGA: Przekazywanie (forwarding) X11 i Autoryzacji jest domy¶lnie "
+#~ "wy³±czone."
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "Ze wzglêdów bezpieczeñstwa Debianowa wersja ssh ma ForwardX11 i "
+#~ "ForwardAgent ustawione  domy¶lnie na 'off'."
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "Dla zaufanych serwerów mo¿esz w³±czyæ te opcje w pliku konfiguracyjnym "
+#~ "lub przy pomocy opcji -X z linii komend."
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr "Wiêcej szczegó³ów znajdziesz w /usr/share/doc/ssh/README.Debian."
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "klucze ssh2 w³±czone do plików konfiguracyjnych"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "Pocz±wszy od wersji 3 OpenSSH nie u¿ywa ju¿ osobnych plików dla kluczy "
+#~ "ssh1 i ssh2. Oznacza to, ¿e pliki authorized_keys2 i known_hosts2 nie s± "
+#~ "ju¿ potrzebne. Bêd± one jednak odczytywane aby zachowaæ wsteczn± "
+#~ "kompatybilno¶æ."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Czy chcesz uruchamiaæ serwer sshd ?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Ten pakiet zawiera zarówno klienta ssh, jak i serwer sshd."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Normalnie serwer sshd (Secure Shell Server) bêdzie uruchomiony aby "
+#~ "umo¿liwiæ zdalny dostêp przez ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Je¶li jeste¶ zainteresowany u¿ywaniem wy³±cznie klienta ssh dla po³±czeñ "
+#~ "wychodz±cych z tej maszyny, i nie chcesz siê na ni± logowaæ przy pomocy "
+#~ "ssh, to mo¿esz teraz wy³±czyæ serwer sshd."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Odradzamy stosowanie ustawieñ ¶rodowiskowych dla kluczy."
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "Ta wersja OpenSSH ma wy³±czon± opcjê wykorzystywania ustawieñ "
+#~ "¶rodowiskowych dla kluczy publicznych. Mo¿na dziêki temu unikn±æ pewnych "
+#~ "ataków (jak np.: LD_PRELOAD). Je¿eli u¿ywasz tej opcji w pliku "
+#~ "authorized_keys, to zawarte w nim klucze nie bêd± dzia³aæ dopóki ta opcja "
+#~ "nie zostanie usuniêta."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Aby ponownie w³±czyæ tê opcjê, nale¿y dodaæ wpis \"PermitUserEnvironment "
+#~ "yes\" do pliku /etc/ssh/sshd_config po ukoñczeniu aktualizacji. Przy "
+#~ "zmianie konfiguracji nale¿y zapoznaæ siê z informacjami zawartymi na "
+#~ "stronie podrêcznika systemowego sshd_config(5)."
+
+#~ msgid "Privilege separation"
+#~ msgstr "Separacja uprawnieñ"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "Separacja uprawnieñ jest domy¶lnie w³±czona, wiêc je¶li zdecydujesz siê "
+#~ "j± wy³±czyæ, musisz dodaæ \"UsePrivilegeSeparation no\" do pliku /etc/ssh/"
+#~ "sshd_config."
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "W³±czenie separacji uprawnieñ"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "Ta wersja OpenSSH zawiera now± opcjê separacji uprawnieñ. Znacz±co "
+#~ "zmniejsza ona ilo¶æ kodu, który jest uruchamiany jako root i co za tym "
+#~ "idzie redukuje efekty luk bezpieczeñstwa w sshd."
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "Niestety separacja uprawnieñ ¼le reaguje z PAMem. Jakikolwiek modu³ sesji "
+#~ "PAM, który musi byæ uruchamiany jako root (pam_mkhomedir, na przyk³ad) "
+#~ "zawiedzie. Nie bêdzie dzia³aæ równie¿ interaktywna autentykacja z "
+#~ "klawiatury (keyboard-interactive authentication)."
+
+#, fuzzy
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "Zdecydowa³e¶ siê na to abym wygenerowa³ dla ciebie plik sshd_config, i "
+#~ "mo¿esz wybraæ czy chcesz w³±czyæ Separacjê Uprawnieñ, czy te¿ nie. Je¶li "
+#~ "nie u¿ywasz j±dra z serii 2.0 (w którym to przypadku *musisz* "
+#~ "odpowiedzieæ tutaj 'nie' albo sshd w ogóle nie ruszy) i je¶li nie musisz "
+#~ "korzystaæ z mo¿liwo¶ci PAMa, które nie bêd± dzia³a³y z t± opcj±, "
+#~ "powiniene¶ odpowiedzieæ tutaj 'tak'."
+
+#~ msgid ""
+#~ "NB! If you are running a 2.0 series Linux kernel, then privilege "
+#~ "separation will not work at all, and your sshd will fail to start unless "
+#~ "you explicitly turn privilege separation off."
+#~ msgstr ""
+#~ "UWAGA! Je¿eli u¿ywasz j±dra Linux'a z serii 2.0, to separacja uprawnieñ w "
+#~ "ogóle nie bêdzie dzia³aæ i sshd nie wystartuje dopóki w³asnorêcznie nie "
+#~ "wy³±czysz separacji uprawnieñ w /etc/ssh/sshd_config."
diff --git a/debian/po/pt_BR.po b/debian/po/pt_BR.po
new file mode 100644
index 000000000..7c0a39fe8
--- /dev/null
+++ b/debian/po/pt_BR.po
@@ -0,0 +1,401 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2005-06-22 19:32-0300\n"
+"Last-Translator: André Luís Lopes <andrelop@debian.org>\n"
+"Language-Team: Debian-BR Project <debian-l10n-portuguese@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Gerar novo arquivo de configuração"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Esta versão do OpenSSH possui um arquivo de configuração consideravelmente "
+"diferente da versão fornecida com o Debian 'Potato' (Debian versão 2.2), a "
+"versão do Debian da qual você parece estar atualizando. Esse assistente de "
+"confgiuração inicial pode agora gerar um novo arquivo de configuração (/etc/"
+"ssh/sshd_config) que irá funcionar com o nova versão do servidor sshd mas "
+"não irá conter nenhuma personalização que você possa ter feito na versão "
+"anterior."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Por favor note que este novo arquivo de configuração irá definir o valor da "
+"opção 'PermitRootLogin' para \"yes\" (o que significa que qualquer pessoa "
+"que conheça a senha de root poderá conectar via ssh diretamente como root no "
+"servidor onde este pacote esta sendo instalado). A opinião do mantenedor do "
+"pacote é que esse é o comportamente padrão correto (consulte o arquivo "
+"README.Debian deste pacote para maiores detalhes), mas você poderá sempre "
+"editar o arquivo sshd_config e definir esta opção para \"no\" caso você não "
+"concorde com o mantenedor do OpenSSH."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"É fortemente recomendado que você permita que o novo arquivo de configuração "
+"será gerado automaticamente para você."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "Deseja continuar (e arriscar acabar com sessões ssh ativas) ?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"A versão de /etc/init.d/ssh que você possui instalada está prestes a matar "
+"todas as instâncias sshd sendo executadas. Se você está fazendo esta "
+"atualização através de uma sessão ssh, isto seria uma Coisa Ruim(tm)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Você pode corrigir isto adicionando \"--pidfile /var/run/sshd.pid\" na linha "
+"start-stop-daemon na seção stop deste arquivo."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Aviso: rsh-server está instalado --- provavelmente não é uma boa idéia"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Possuir o rsh-server instalado minará a segurança que você estava "
+"provavelmente querendo obter instalando o ssh. Eu recomendaria a você "
+"remover este pacote."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Aviso: telnetd está instalado --- provavelmente não é uma boa idéia"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Eu recomendaria a você ou remover o pacote telnetd (se você atualmente não "
+"precisa oferecer acesso telnet) ou instalar telnetd-ssl. Assim existe pelo "
+"menos uma chance das sessões telnet não enviarem login/senha não "
+"criptografadas e informações de sessão através da rede."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Aviso: você deve criar uma nova host key"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Existe uma antiga /etc/ssh/ssh_host_key, a qual é criptografada usando IDEA. "
+"O OpenSSH não pode gerenciar este arquivo host key e eu não consigo "
+"encontrar o utilitário ssh-keygen da antiga (non-free) instalação SSH."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Você precisará gerar uma nova host key."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr "Desabilitar autenticação desafio-resposta ?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"A autenticação através de senha parece estar desabilitada em sua "
+"configuração atual do servidor OpenSSH. Para que seja possível evitar que "
+"usuários se autentiquem usando senhas (talvez usando somente autenticação "
+"através de chaves públicas) em versões recentes do OpenSSH você deve "
+"desabilitar a autenticação desafio-resposta ou então se certificar que sua "
+"configuração PAM não permita autenticação através de arquivos de senhas Unix."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Caso você desabilite a autenticação desafio-resposta, os usuários não "
+"poderão se autenticar usando suas senhas. Caso você mantenha esse tipo de "
+"autenticação habilitada (a resposta padrão), a opção 'PasswordAuthentication "
+"no' não terá efeito útil a menos que você também ajuste sua configuração PAM "
+"em /etc/pam.d/ssh."
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "Deseja que que ssh-keysign seja instalado SUID root ?"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr ""
+#~ "Existe a opção de instalar o cliente auxiliar ssh-keysign com o bit SUID "
+#~ "definido."
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "Caso você instale o ssh-keysign com o bit SUID ativado, você será capaz "
+#~ "de usar a autenticação baseada em host do protocolo SSH 2."
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "Caso esteja em dúvida, é sugerido que você instale com o bit SUID "
+#~ "ativado. Caso isso cause problemas e você mude de idéia posteriormente "
+#~ "execute o comando : dpkg-reconfigure ssh"
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "Permitir somente protocolo SSH versão 2"
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "Esta versão do OpenSSH suporta a versão 2 do protocolo ssh, a qual é "
+#~ "muito mais segura que a versão anterior. É recomendado desabilitar o "
+#~ "suporte ao protocolo ssh versão 1, porém isto fará com que conexões "
+#~ "fiquem mais lentas em máquinas mais antigas e pode impedir que clientes "
+#~ "antigos consigam se conectar (o cliente ssh fornecido com a versão do "
+#~ "Debian 2.2 \"potato\" é afetada.)"
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "Por favor note também que as chaves usadas para o protocolo 1 são "
+#~ "diferentes portanto você não poderá usá-las caso você somente permita "
+#~ "conexões usando o protocolo 2."
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "Caso você posteriormente mude de idéia sobre esta configuração, o arquivo "
+#~ "README.Debian deste pacote possui instruções sobre o que mudar em seu "
+#~ "arquivo de configuração sshd_config."
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr "NOTA: Encaminhamento de X11 e Autorização desabilitados por padrão."
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "Por razôes de segurança, a versão Debian do ssh tem as opções ForwardX11 "
+#~ "e ForwardAgent definidas como ``off'' por padrão."
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "Você pode habilitar isso para servidores que você confia, ou em um dos "
+#~ "arquivos de configuração, ou com a opção de linha de comando -X."
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr ""
+#~ "Maiores detalhes podem ser encontrados em /usr/share/doc/ssh/README."
+#~ "Debian."
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "Chaves ssh2 incluídas nos arquivos de configuração"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "A partir do versão 3 o OpenSSH não usa mais arquivos separados para as "
+#~ "chaves ssh1 e ssh2. Isto significa que os arquivos \"authorized_keys2\" e "
+#~ "\"know_hosts2\" não são mais necessários. Os mesmos continuarão a ser "
+#~ "lidos para manter a compatibilidade com versões anteriores."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Você deseja executar o servidor sshd ?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Este pacote contém ambos o cliente ssh e o servidor sshd."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Normalmente o sshd Secure Shell Server será executado para permitir "
+#~ "logins remotos via ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Se você está interessado somente em usar o cliente ssh para conexões para "
+#~ "fora desta máquina, e não quer logar na mesma usando ssh, então você pode "
+#~ "desabilitar o sshd aqui."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Opções ed ambiente sobre chaves estão obsoletas"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "Esta versão do OpenSSH desabilita a opção de ambiente para chaves "
+#~ "públicas por padrão par evitar certos ataques (por exemplo, LD_PRELOAD). "
+#~ "Caso você esteja usando esta opção em um arquivo authorized_keys, tenha "
+#~ "cuidado pois as chaves em questão não irão mais funcionar até que esta "
+#~ "opção seja removida."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Para reabilitar esta opção, defina a opção \"PermitUserEnvironment yes\" "
+#~ "no arquivo /et/ssh/sshd_config depois da a atualização terminar, "
+#~ "atentando para o aviso na página de manual do sshd_config(5)."
+
+#~ msgid "Privilege separation"
+#~ msgstr "Separação de Previlégios"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "A separação de previlégios está habilitado por padrão, portanto caso você "
+#~ "decida que deseja desabilitá-la você precisará adicionar a linha "
+#~ "\"UsePrivilegeSeparation no\" ao arquivo /etc/ssh/sshd_config."
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "Habilitar Separação de Privilégios"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "Esta versão do OpenSSH contém a nova opção de separação de privilégios. "
+#~ "Esta opção reduz significativamente a quantidade de código que é "
+#~ "executada como root e portanto reduz o impacto de falhas de segurança no "
+#~ "sshd."
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "Infelizmente, a separação de privilégios interage de maneira ruim com o "
+#~ "PAM. Quaisquer módulos de sessão PAM que precisem ser executados como "
+#~ "root (pam_mkhomedir, por exemplo) irão falhar e autenticação interativa "
+#~ "com teclado do PAM não funcionará."
+
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "Uma vez que você optou por permitir que o debconf gere um arquivo "
+#~ "sshd_config para você, é possível escolher se você deseja ter ou não o "
+#~ "recurso de separação de privilégios habilitado. A menos que você saiba "
+#~ "que utiliza recursos PAM que não funcionarão com esta opção habilitada, "
+#~ "você deverá habilitar esse recurso."
+
+#~ msgid ""
+#~ "NB! If you are running a 2.0 series Linux kernel, then privilege "
+#~ "separation will not work at all, and your sshd will fail to start unless "
+#~ "you explicitly turn privilege separation off."
+#~ msgstr ""
+#~ "NB ! Caso você esteja executando um kernel Linux da séria 2.0 o recurso "
+#~ "de separação de privilégios não funcionará e seu daemon sshd irá falhar "
+#~ "ao iniciar a menos que você explicitamente desabilite o recurso de "
+#~ "separação de privilégios."
diff --git a/debian/po/ru.po b/debian/po/ru.po
new file mode 100644
index 000000000..b5117f4b1
--- /dev/null
+++ b/debian/po/ru.po
@@ -0,0 +1,368 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2003-10-02 17:20+0500\n"
+"Last-Translator: Ilgiz Kalmetev <translator@ilgiz.pp.ru>\n"
+"Language-Team: russian <ru@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=KOI8-R\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "óÇÅÎÅÒÉÒÏ×ÁÔØ ÎÏ×ÙÊ ËÏÎÆÉÇÕÒÁÃÉÏÎÎÙÊ ÆÁÊÌ"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"÷ ÜÔÏÊ ×ÅÒÓÉÉ OpenSSH ÚÎÁÞÉÔÅÌØÎÏ ÐÅÒÅÒÁÂÏÔÁÎ ÆÁÊÌ ÎÁÓÔÒÏÅË, × ÏÔÌÉÞÉÉ ÏÔ  "
+"×ÅÒÓÉÉ, ËÏÔÏÒÁÑ ÐÏÓÔÁ×ÌÑÌÁÓØ Ó Debian 'Potato', É ËÏÔÏÒÕÀ ÷Ù, ËÁÖÅÔÓÑ, "
+"ÏÂÎÏ×ÌÑÅÔÅ. ñ ÍÏÇÕ ÓÇÅÎÅÒÉÒÏ×ÁÔØ ÄÌÑ ÷ÁÓ ÎÏ×ÙÊ ÆÁÊÌ ÎÁÓÔÒÏÅË (/etc/ssh/sshd."
+"config), ËÏÔÏÒÙÊ ÂÕÄÅÔ ÒÁÂÏÔÁÔØ Ó ÎÏ×ÏÊ ×ÅÒÓÉÅÊ ÓÅÒ×ÅÒÁ, ÎÏ ÎÅ ÂÕÄÅÔ "
+"ÓÏÄÅÒÖÁÔØ ÎÁÓÔÒÏÅË, ËÏÔÏÒÙÅ ÷Ù ÓÄÅÌÁÌÉ × ÓÔÁÒÏÊ ×ÅÒÓÉÉ."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"ïÂÒÁÔÉÔÅ ×ÎÉÍÁÎÉÅ ÎÁ ÔÏ, ÞÔÏ ÜÔÏÔ ÎÏ×ÙÊ ÆÁÊÌ ÎÁÓÔÒÏÅË ÕÓÔÁÎÏ×ÉÔ ÚÎÁÞÅÎÉÅ "
+"ÐÁÒÁÍÅÔÒÁ 'PermitRootLogin' × yes (ÏÚÎÁÞÁÀÝÅÇÏ, ÞÔÏ ÌÀÂÏÊ ÞÅÌÏ×ÅË, ÚÎÁÀÝÉÊ "
+"ÐÁÒÏÌØ ÓÕÐÅÒÐÏÌØÚÏ×ÁÔÅÌÑ ÍÏÖÅÔ ×ÏÊÔÉ × ÓÉÓÔÅÍÕ ÞÅÒÅÚ ssh). ðÏ ÍÎÅÎÉÀ "
+"ÓÏÐÒÏ×ÏÖÄÁÀÝÅÇÏ ÜÔÏÇÏ ÐÁËÅÔÁ - ÜÔÏ ÒÁÚÕÍÎÏ, ÎÏ ÷Ù ×ÓÅÇÄÁ ÍÏÖÅÔÅ ÕÓÔÁÎÏ×ÉÔØ "
+"ÚÎÁÞÅÎÉÅ ÜÔÏÇÏ ÐÁÒÁÍÅÔÒÁ × ÆÁÊÌÅ sshd_config ÔÁË, ËÁË ÷ÁÍ ËÁÖÅÔÓÑ ÐÒÁ×ÉÌØÎÙÍ."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"îÁÓÔÏÑÔÅÌØÎÏ ÒÅËÏÍÅÎÄÕÅÔÓÑ, ÒÁÚÒÅÛÉÔØ ÓÇÅÎÅÒÉÒÏ×ÁÔØ ÄÌÑ ÷ÁÓ ÎÏ×ÙÊ ÆÁÊÌ "
+"ÎÁÓÔÒÏÅË."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "÷Ù ÈÏÔÉÔÅ ÐÒÏÄÏÌÖÉÔØ (ÒÉÓËÕÑ ÐÏÔÅÒÑÔØ ÁËÔÉ×ÎÙÅ ssh-ÓÏÅÄÉÎÅÎÉÑ)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"÷ÅÒÓÉÑ  /etc/init.d/ssh,  ËÏÔÏÒÕÀ  ×Ù  ÕÓÔÁÎÁ×ÌÉ×ÁÅÔÅ, ÍÏÖÅÔ ÕÂÉÔØ ×ÓÅ "
+"ÚÁÐÕÝÅÎÎÙÅ  ÐÒÏÃÅÓÓÙ  ssh.  åÓÌÉ ×Ù ÏÓÕÝÅÓÔ×ÌÑÅÔÅ ÜÔÏ ÏÂÎÏ×ÌÅÎÉÅ ÞÅÒÅÚ ssh "
+"ÓÅÓÓÉÀ, ÔÏ ÜÔÏ ðÌÏÈÁÑ ÷ÅÝØ (tm)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"üÔÏ ÍÏÖÎÏ ÉÓÐÒÁ×ÉÔØ ÄÏÂÁ×ÌÅÎÉÅÍ \"--pidfile /var/run/sshd.pid\" × ÓÔÒÏËÅ "
+"start-stop-daemon × ÒÁÚÄÅÌÅ stop ÜÔÏÇÏ ÆÁÊÌÁ."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "ðÒÅÄÕÐÒÅÖÄÅÎÉÅ: ÕÓÔÁÎÏ×ÌÅÎ rsh-server --- ÐÏÖÁÌÕÊ, ÜÔÏ ÎÅ ÏÞÅÎØ ÈÏÒÏÛÏ"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"õÓÔÁÎÏ×ÌÅÎÎÙÊ rsh-ÓÅÒ×ÅÒ ÓÎÉÖÁÅÔ ÂÅÚÏÐÁÓÎÏÓÔØ, ËÏÔÏÒÕÀ ÷Ù ×ÅÒÏÑÔÎÏ ÈÏÔÉÔÅ "
+"ÐÏ×ÙÓÉÔØ ÕÓÔÁÎÁ×ÌÉ×ÁÑ ssh. òÅËÏÍÅÎÄÕÅÔÓÑ ÕÄÁÌÉÔØ ÜÔÏÔ ÐÁËÅÔ."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "ðÒÅÄÕÐÒÅÖÄÅÎÉÅ: ÕÓÔÁÎÏ×ÌÅÎ telnetd --- ÐÏÖÁÌÕÊ, ÜÔÏ ÎÅ ÏÞÅÎØ ÈÏÒÏÛÏ"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"ñ ÒÅËÏÍÅÎÄÏ×ÁÌ ÂÙ ÷ÁÍ ÕÄÁÌÉÔØ ÐÁËÅÔ telnetd (ÅÓÌÉ ÷ÁÍ ÄÅÊÓÔ×ÉÔÅÌØÎÏ ÎÅ ÎÕÖÅÎ "
+"ÄÏÓÔÕÐ telnet) ÉÌÉ ÕÓÔÁÎÏ×ÉÔØ telnet-ssl, ÞÔÏÂÙ ÉÍÅÔØ ÈÏÔÑ ÂÙ ×ÏÚÍÏÖÎÏÓÔØ ÎÅ "
+"ÐÅÒÅÄÁ×ÁÔØ ÐÏ ÓÅÔÉ ÎÅÚÁÛÉÆÒÏ×ÁÎÎÙÅ ÉÍÅÎÁ É ÐÁÒÏÌÉ ÐÏÌØÚÏ×ÁÔÅÌÅÊ É ÐÒÏÞÕÀ "
+"ÉÎÆÏÒÍÁÃÉÀ × telnet-ÓÅÓÓÉÑÈ."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "ðÒÅÄÕÐÒÅÖÄÅÎÉÅ: ÷Ù ÄÏÌÖÎÙ ÓÏÚÄÁÔØ ÎÏ×ÙÊ ÈÏÓÔÏ×ÙÊ ËÌÀÞ."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"îÁÊÄÅÎ ÓÔÁÒÙÊ /etc/ssh/ssh_host_key, ËÏÔÏÒÙÊ ÚÁÛÉÆÒÏ×ÁÎ IDEA. OpenSSH ÎÅ "
+"ÍÏÖÅÔ ÒÁÂÏÔÁÔØ Ó ÜÔÉÍ ÈÏÓÔÏ×ÙÍ ËÌÀÞÏÍ, É Ñ ÎÅ ÍÏÇÕ ÎÁÊÔÉ ÕÔÉÌÉÔÕ ssh-keygen "
+"ÏÔ ÓÔÁÒÏÊ (ÎÅÓ×ÏÂÏÄÎÏÊ) ÉÎÓÔÁÌÌÑÃÉÉ SSH."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "÷ÁÍ ÎÁÄÏ ÂÕÄÅÔ ÓÇÅÎÅÒÉÒÏ×ÁÔØ ÎÏ×ÙÊ ËÌÀÞ ÈÏÓÔÁ."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "èÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ ssh-keysign ËÁË SUID root?"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr "÷Ù ÉÍÅÅÔÅ ×ÏÚÍÏÖÎÏÓÔØ ÕÓÔÁÎÏ×ÉÔØ ÂÉÔ SUID ÄÌÑ ÕÔÉÌÉÔÙ ssh-keysign."
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "åÓÌÉ ×Ù ÕÓÔÁÎÏ×ÉÔÅ ÂÉÔ SUID ÄÌÑ ssh, ÔÏ ×Ù ÓÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÈÏÓÔÏ×ÕÀ "
+#~ "ÁÕÔÅÎÔÉÆÉËÁÃÉÀ ÄÌÑ SSH-ÐÒÏÔÏËÏÌÁ ×ÅÒÓÉÉ 2."
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "åÓÌÉ ÷Ù ÎÅ ÚÎÁÅÔÅ, ÞÔÏ ×ÙÂÒÁÔØ, ÔÏ ÒÅËÏÍÅÎÄÕÀ ÕÓÔÁÎÏ×ÉÔØ SUID ÄÌÑ ssh. ÷ "
+#~ "ÄÁÌØÎÅÊÛÅÍ, ÷Ù ÍÏÖÅÔÅ ÉÚÍÅÎÉÔØ Ó×ÏÊ ×ÙÂÏÒ ËÏÍÁÎÄÏÊ: dpkg-reconfigure ssh"
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "òÁÚÒÅÛÉÔØ ÉÓÐÏÌØÚÏ×ÁÎÉÅ ÔÏÌØËÏ SSH-ÐÒÏÔÏËÏÌÁ ×ÅÒÓÉÉ 2."
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "üÔÁ ×ÅÒÓÉÑ OpenSSH ÐÏÄÄÅÒÖÉ×ÁÅÔ ÐÒÏÔÏËÏÌ ssh ×ÅÒÓÉÉ 2, ËÏÔÏÒÙÊ "
+#~ "ÏÂÅÓÐÅÞÉ×ÁÅÔ ÂÏÌØÛÕÀ ÓÔÅÐÅÎØ ÚÁÝÉÔÙ. ìÕÞÛÅ ÚÁÐÒÅÔÉÔØ ÐÒÏÔÏËÏÌ ×ÅÒÓÉÉ 1, "
+#~ "ÎÏ ÜÔÏ ÍÏÖÅÔ ÐÒÉ×ÅÓÔÉ Ë ÚÁÍÅÄÌÅÎÉÀ ÒÁÂÏÔÙ ÍÁÌÏÐÒÏÉÚ×ÏÄÉÔÅÌØÎÙÈ ÍÁÛÉÎ É "
+#~ "ÍÏÖÅÔ ÓÄÅÌÁÔØ ÎÅ×ÏÚÍÏÖÎÙÍ ÐÏÄËÌÀÞÅÎÉÅ Ó ÐÏÍÏÝØÀ ÓÔÁÒÙÈ ËÌÉÅÎÔÓËÉÈ "
+#~ "ÐÒÏÇÒÁÍÍ (× ÞÁÓÔÎÏÓÔÉ, ÜÔÏ ÏÔÎÏÓÉÔÓÑ Ë ËÌÉÅÎÔÕ ssh, ÐÏÓÔÁ×ÌÑÅÍÏÇÏ Ó "
+#~ "\"potato\"."
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "ïÂÒÁÔÉÔÅ ×ÎÉÍÁÎÉÅ ÎÁ ÔÏ, ÞÔÏ ËÌÀÞÉ ÄÌÑ ÐÒÏÔÏËÏÌÁ ×ÅÒÓÉÉ 1 ÉÍÅÀÔ ÄÒÕÇÏÊ "
+#~ "ÆÏÒÍÁÔ, É ÐÏÜÔÏÍÕ ÷Ù ÎÅ ÓÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÉÈ, ÅÓÌÉ ÒÁÚÒÅÛÉÔÅ ÔÏÌØËÏ "
+#~ "ÓÏÅÄÉÎÅÎÉÑ ÐÏ ÐÒÏÔÏËÏÌÕ ×ÅÒÓÉÉ 2."
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "åÓÌÉ ÐÏÚÖÅ ÷Ù ÉÚÍÅÎÉÔÅ Ó×ÏÅ ÍÎÅÎÉÅ, ÔÏ × ÆÁÊÌÅ README.Debian ÓÏÄÅÒÖÁÔÓÑ "
+#~ "ÉÎÓÔÒÕËÃÉÉ Ï ÔÏÍ, ÞÔÏ ÎÕÖÎÏ ÓÄÅÌÁÔØ × ÆÁÊÌÅ sshd_config."
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr "ðòéíåþáîéå: æÏÒ×ÁÒÄÉÎÇ X11 É Authorization ÚÁÐÒÅÝÅÎ ÐÏ ÕÍÏÌÞÁÎÉÀ."
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "ðÏ ÐÒÉÞÉÎÁÍ ÂÅÚÏÐÁÓÎÏÓÔÉ, × ×ÅÒÓÉÉ ÄÌÑ Debian ssh ÉÍÅÅÔ ForwardX11 É "
+#~ "ForwardAgent ÕÓÔÁÎÏ×ÌÅÎÎÙÍÉ × ``off'' ÐÏ ÕÍÏÌÞÁÎÉÀ."
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "÷Ù ÍÏÖÅÔÅ ÒÁÚÒÅÛÉÔØ ÉÈ ÄÌÑ ÓÅÒ×ÅÒÏ×, ËÏÔÏÒÙÍ ÄÏ×ÅÒÑÅÔÅ ÌÉÂÏ × ÏÄÎÏÍ ÉÚ "
+#~ "ÎÁÓÔÒÏÅÞÎÙÈ ÆÁÊÌÏ×, ÉÌÉ ÐÁÒÁÍÅÔÒÏÍ ËÏÍÁÎÄÎÏÊ ÓÔÒÏËÉ -X."
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr ""
+#~ "äÏÐÏÌÎÉÔÅÌØÕÀ ÉÎÆÏÒÍÁÃÉÀ ÍÏÖÎÏ ÎÁÊÔÉ × /usr/share/doc/ssh/README.Debian"
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "ëÌÀÞÉ ssh2 ÄÏÂÁ×ÌÅÎÙ × ÆÁÊÌÙ ÎÁÓÔÒÏÅË"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "îÁÞÉÎÁÑ Ó ×ÅÒÓÉÉ 3 OpenSSH ÎÅ ÐÏÄÄÅÒÖÉ×ÁÅÔ ÒÁÚÄÅÌØÎÙÅ ÆÁÊÌÙ ÄÌÑ ËÌÀÞÅÊ "
+#~ "ssh1 É ssh2. üÔÏ ÏÚÎÁÞÁÅÔ, ÞÔÏ ÆÁÊÌÙ authorized_keys2 É known_hosts2 "
+#~ "ÂÏÌØÛÅ ÎÅ ÎÕÖÎÙ. ðÒÏÇÒÁÍÍÁ ÐÏ-ÐÒÅÖÎÅÍÕ ÂÕÄÅÔ ÉÈ ÓÞÉÔÙ×ÁÔØ ÄÌÑ ÏÂÅÓÐÅÞÅÎÉÑ "
+#~ "ÏÂÒÁÔÎÏÊ ÓÏ×ÍÅÓÔÉÍÏÓÔÉ."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "èÏÔÉÔÅ ÚÁÐÕÓÔÉÔØ ÓÅÒ×ÅÒ sshd?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "üÔÏÔ ÐÁËÅÔ ÓÏÄÅÒÖÉÔ É ssh-ËÌÉÅÎÔ, É ssh-ÓÅÒ×ÅÒ."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "ïÂÙÞÎÏ sshd Secure Shell Server ÚÁÐÕÓËÁÅÔÓÑ ÄÌÑ ÕÄÁÌÅÎÎÏÇÏ ×ÈÏÄÁ × "
+#~ "ÓÉÓÔÅÍÕ ÞÅÒÅÚ ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "åÓÌÉ ×ÁÓ ÉÎÔÅÒÅÓÕÅÔ ÔÏÌØËÏ ÉÓÐÏÌØÚÏ×ÁÎÉÅ ssh-ËÌÉÅÎÔÁ ÄÌÑ ÉÓÈÏÄÑÝÉÈ "
+#~ "ÓÏÅÄÉÎÅÎÉÊ Ó ÜÔÏÊ ÍÁÛÉÎÙ, É ×Ù ÎÅ ÈÏÔÉÔÅ ×ÈÏÄÉÔØ × ÅÅ ÓÉÓÔÅÍÕ ÞÅÒÅÚ ssh, "
+#~ "ÔÏ ÓÅÊÞÁÓ ÷Ù ÍÏÖÅÔÅ ÚÁÐÒÅÔÉÔØ sshd."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "ïÐÃÉÉ ÏËÒÕÖÅÎÉÑ ÄÌÑ ËÌÀÞÅÊ ÂÙÌÉ ÚÁÐÒÅÝÅÎÙ"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "üÔÁ ×ÅÒÓÉÑ OpenSSH ÐÏ ÕÍÏÌÞÁÎÉÀ ÚÁÐÒÅÝÁÅÔ ÏÐÃÉÀ ÏËÒÕÖÅÎÉÑ ÄÌÑ ÐÕÂÌÉÞÎÙÈ "
+#~ "ËÌÀÞÅÊ, ÞÔÏÂÙ ÉÚÂÅÖÁÔØ ÁÔÁË (ÎÁÐÒÉÍÅÒ, LD_PRELOAD). åÓÌÉ ÷Ù ÉÓÐÏÌØÚÕÅÔÅ "
+#~ "ÜÔÕ ÏÐÃÉÀ × ÆÁÊÌÅ authorized_keys, ÔÏ ÂÕÄØÔÅ ×ÎÉÍÁÔÅÌØÎÙ, ÄÁÎÎÙÅ ËÌÀÞÉ "
+#~ "ÂÏÌØÛÅ ÎÅ ÂÕÄÕÔ ÒÁÂÏÔÁÔØ, ÐÏËÁ ÏÐÃÉÑ ÎÅ ÕÄÁÌÅÎÁ."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "þÔÏÂÙ ×ÎÏ×Ø  ÒÁÚÒÅÛÉÔØ ÜÔÕ ÏÐÃÉÀ, ÕÓÔÁÎÏ×ÉÔÅ ÐÁÒÁÍÅÔÒ "
+#~ "\"PermitUserEnvironment yes\" × ÆÁÊÌÅ sshd_config ÐÏÓÌÅ ÚÁ×ÅÒÛÅÎÉÑ "
+#~ "ÏÂÎÏ×ÌÅÎÉÑ,É ÏÂÒÁÔÉÔÅ ×ÎÉÍÁÎÉÅ ÎÁ ÐÒÅÄÕÐÒÅÖÄÅÎÉÅ × ÓÔÒÁÎÉÃÅ ÒÕËÏ×ÏÄÓÔ×Á "
+#~ "sshd_config(5)."
+
+#~ msgid "Privilege separation"
+#~ msgstr "òÁÚÄÅÌÅÎÉÅ ÐÒÉ×ÉÌÅÇÉÊ"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "òÁÚÄÅÌÅÎÉÅ ÐÒÉ×ÉÌÅÇÉÊ ÐÏ ÕÍÏÌÞÁÎÉÀ ×ËÌÀÞÅÎÏ, ÐÏÜÔÏÍÕ ÅÓÌÉ ÷Ù ÚÁÈÏÔÉÔÅ ÅÇÏ "
+#~ "ÏÔËÌÀÞÉÔØ, ÔÏ ÎÅÏÂÈÏÄÉÍÏ ÄÏÂÁ×ÉÔØ × ÆÁÊÌ /etc/ssh/sshd_config ÓÔÒÏËÕ "
+#~ "\"UsePrivilegeSeparation no\"."
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "òÁÚÒÅÛÉÔØ ÒÁÚÄÅÌÅÎÉÅ ÐÒÉ×ÉÌÅÇÉÊ"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "üÔÁ ×ÅÒÓÉÑ OpenSSH ÓÏÄÅÒÖÉÔ ÎÏ×ÕÀ ÏÐÃÉÀ - ×ÏÚÍÏÖÎÏÓÔØ ÒÁÚÄÅÌÅÎÉÑ "
+#~ "ÐÒÉ×ÅÌÅÇÉÊ. üÔÏ ÚÎÁÞÉÔÅÌØÎÏ ÓÏËÒÁÝÁÅÔ ÒÁÚÍÅÒ ËÏÄÁ, ÒÁÂÏÔÁÀÝÅÇÏ Ó ÐÒÁ×ÁÍÉ "
+#~ "root, É × ÃÅÌÏÍ ÓÎÉÖÁÅÔ ÐÏÔÅÎÃÉÁÌØÎÕÀ ÕÑÚ×ÉÍÏÓÔØ sshd."
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "ë ÓÏÖÁÌÅÎÉÀ, ÒÁÚÄÅÌÅÎÉÅ ÐÒÉ×ÉÌÅÇÉÊ ÐÌÏÈÏ ÒÁÂÏÔÁÅÔ Ó PAM. üÔÏ ÏÔÎÏÓÉÔÓÑ Ë "
+#~ "ÌÀÂÙÍ ÓÏÄÑÌÍ ÓÅÓÓÉÊ PAM, ËÏÔÏÒÙÍ ÎÕÖÎÏ ÒÁÂÏÔÁÔØ Ó ÐÒÁ×ÁÍÉ root (ÎÁÐÒÉÍÅÒ, "
+#~ "pam_mkhomedir), É PAM-ÁÕÔÅÎÔÉÆÉËÁÃÉÑ × ÉÎÔÅÒÁËÔÉ×ÎÏÍ ÒÅÖÉÍÅ Ó ËÌÁ×ÉÁÔÕÒÙ "
+#~ "ÒÁÂÏÔÁÔØ ÎÅ ÂÕÄÅÔ."
+
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "ôÁË ËÁË ÷Ù ÒÁÚÒÅÛÉÌÉ ÍÎÅ ÓÇÅÎÅÒÉÒÏ×ÁÔØ ÄÌÑ ÷ÁÓ ÆÁÊÌ sshd_config, ÔÏ ×Ù "
+#~ "ÍÏÖÅÔÅ ×ÙÂÒÁÔØ, ÎÕÖÎÏ ÌÉ ×ËÌÀÞÉÔØ ÉÌÉ ×ÙËÌÀÞÉÔØ ÏÐÃÉÀ ÒÁÚÄÅÌÅÎÉÑ "
+#~ "ÐÒÉ×ÉÌÅÇÉÊ.åÓÌÉ ÷Ù ÎÅ ÚÎÁÅÔÅ, ÎÕÖÎÏ ÌÉ ÷ÁÍ ÉÓÐÏÌØÚÏ×ÁÔØ ÆÕÎËÃÉÉ PAM, "
+#~ "ËÏÔÏÒÙÅ ÎÅ ÒÁÂÏÔÁÀÔ Ó ÜÔÏÊ ÏÐÃÉÅÊ, ÔÏ ÌÕÞÛÅ ÒÁÚÒÅÛÉÔØ ÅÅ."
diff --git a/debian/po/sv.po b/debian/po/sv.po
new file mode 100644
index 000000000..70f67c57f
--- /dev/null
+++ b/debian/po/sv.po
@@ -0,0 +1,196 @@
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+# Developers do not need to manually edit POT or PO files.
+# , fuzzy
+# 
+# 
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh 1:4.2p1-4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2005-10-11 18:02+0200\n"
+"Last-Translator: Daniel Nylander <po@danielnylander.se>\n"
+"Language-Team: Swedish <sv@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=iso-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Generera ny konfigurationsfil"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Denna version av OpenSSH har ansenligt ändrat konfigurationsfilen från den "
+"version som skickades med i Debian's 'Potato'-utgåva som du verkar ha "
+"uppgraderat från. Jag kan nu generera en ny konfigurationsfil (/etc/ssh/sshd."
+"config) som kommer att fungera med den nya serverversionen men kommer inte "
+"att innehålla några ändringar du har gjort med den gamla versionen."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Notera att den nya konfigurationsfilen kommer att sätta värdet av "
+"'PermitRootLogin' till 'yes' (betyder att vem som helst som kan root-"
+"lösenordet kan logga in direkt som root). Det är paketansvariges åsikt att "
+"detta är det satt som standard (se README.Debian för mer detaljer) men du "
+"kan alltid ändra sshd_config och sätta detta till 'no' om du vill."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Det är mycket rekommenderat att du låter mig generera en ny "
+"konfigurationsfil till dig."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "Vill du fortsätta (och riska att döda aktiva ssh sessioner)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Versionen av /etc/init.d/ssh som du har installerad kommer antagligen att "
+"döda alla instanser av ssh som körs.  Om du gör denna uppgradering via en "
+"ssh-session är detta en Dålig Idé(tm)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Du kan lösa detta genom att lägga till \"--pidfile /var/run/sshd.pid\" till "
+"raden med start-stop-daemon i sektionen \"stop\" i filen."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Varning: rsh-server är installerad --- kanske inte en bra ide"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"att ha rsh-server installerad förvärrar säkerheten som du säkerligen ville "
+"ha genom att installera ssh.  Jag föreslår att du tar bort det paketet."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Varning: telnetd är installerad --- detta är inte en bra ide"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Jag föreslår att du antingen tar bort paketet telnetd (om du inte faktiskt "
+"behöver erbjuda telnet-tjänsten) eller installera telnetd-ssl så att det i "
+"alla fall finns en liten chans att telnet-sessioner inte kommer att sända "
+"okrypterade login/lösenord och sessionsinformation över nätverket."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Varning: du måste skapa en ny hostnyckel"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Det finns en gammal /etc/ssh/ssh_host_key som är IDEA-krypterad. OpenSSh kan "
+"inte hantera dessa värdnyckelfiler och jag kan inte hitta verktyget ssh-"
+"keygen från den gamla (non-free) installationen av SSH."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Du behöver generera en ny hostnyckel"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr "Stäng av challenge-response autentisering?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"Lösenordsautentisering verkar vara avstängt i din nuvarande OpenSSH-server "
+"konfiguration. För att motverka att användare loggar in med lösenord (kanske "
+"med bara publik nyckelautentisering istället) med senare versioner av "
+"OpenSSH, måste du stänga av challenge-response autentisering eller se till "
+"att din PAM-konfiguration inte tillåter Unix lösenordsfil-autentisering."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Om du stänger av challenge-response autentisering så kan användarna inte "
+"logga in med lösenord. Om du lämnar det aktiverat (som är standard) så "
+"kommer 'PasswordAuthentication no' inte ha någon effekt om du inte justerar "
+"din PAM-konfiguration i /etc/pam.d/ssh."
diff --git a/debian/po/templates.pot b/debian/po/templates.pot
new file mode 100644
index 000000000..77b943641
--- /dev/null
+++ b/debian/po/templates.pot
@@ -0,0 +1,163 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
diff --git a/debian/po/tr.po b/debian/po/tr.po
new file mode 100644
index 000000000..70f899ceb
--- /dev/null
+++ b/debian/po/tr.po
@@ -0,0 +1,322 @@
+# Turkish translation of ssh.
+# This file is distributed under the same license as the ssh package.
+# Recai OktaÅŸ <roktas@omu.edu.tr>, 2004.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: ssh\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2004-04-27 06:50+0300\n"
+"Last-Translator: Recai OktaÅŸ <roktas@omu.edu.tr>\n"
+"Language-Team: Turkish <debian-l10n-turkish@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms:  nplurals=1; plural=0;\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Yeni yapılandırma dosyası oluştur"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Debian 'Potato' dağıtımından yükseltme yaptığınız görünüyor. OpenSSH'ın bu "
+"sürümü Debian 'Potato' ile birlikte gelen sürümden çok farklı bir "
+"yapılandırma dosyası kullanmaktadır. Şimdi sizin için yeni bir yapılandırma "
+"dosyası (/etc/ssh/sshd.config) üretebilirim.  Bu dosya yeni sunucu sürümüyle "
+"çalışacak, fakat eski sürümde yaptığınız özelleştirmeleri içermeyecektir."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Yeni yapılandırma dosyasının 'PermitRootLogin' seçeneğini 'yes' olarak "
+"ayarlayacağını (yani root parolasını bilen herhangi birisinin ssh ile "
+"doğrudan sisteme girebileceğini) unutmayın. Öntanımlı ayarın böyle olması "
+"gerektiği paket geliştiricisinin kanaatidir (ayrıntılar için README.Debian "
+"dosyasını okuyun). Aksi kanaate sahipseniz sshd_config dosyasını "
+"düzenleyerek bu seçeneği 'no' olarak ayarlama imkânınız her zaman vardır."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Yeni bir yapılandırma dosyası üretmeme izin vermeniz kuvvetle tavsiye edilir."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+"Devam etmek istiyor musunuz? (Etkin ssh oturumlarının öldürülmesi riski var.)"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Kurmuş olduğunuz /etc/init.d/ssh sürümü büyük olasılıkla, çalışıyor olan tüm "
+"sshd süreçlerini öldürür. Bu yükseltmeyi bir ssh oturumu üzerinden "
+"yapıyorsanız bu gerçekten Berbat bir Şey olacaktır."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Bu sorunu dosyanın stop bölümündeki start-stop-daemon satırına \"--pidfile /"
+"var/run/sshd.pid\" ekleyerek düzeltebilirsiniz."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Uyarı: rsh-server kurulmuş --- bu muhtemelen iyi bir fikir değil"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"rsh-server'ın kurulu durumda olması muhtemelen ssh'ı kurmakla elde "
+"edilmesini istediğiniz güvenliği gölgeliyor. Bu paketi kaldırmanızı öneririm."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Uyarı: telnetd kurulmuş --- bu muhtemelen iyi bir fikir değil"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Telnetd paketini (eğer gerçekten telnet erişimi sunmak gibi bir "
+"zorunluluğunuz yoksa) kaldırmanızı veya en azından, telnet oturumlarında "
+"şifrelenmemiş giriş/parola ve oturum bilgilerinin ağ üzerinden "
+"gönderilmemesi olanağını sunan telnetd-ssl paketini kurmanızı öneririm."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Uyarı: yeni bir makine anahtarı oluşturmalısınız"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"IDEA ile şifrelenmiş eski bir /ect/ssh/ssh_host_key dosyanız var. OpenSSH bu "
+"anahtar dosyasını yönetemez. Eski (özgür olmayan) SSH kurulumuna ait ssh-"
+"keygen aracını da bulamıyorum."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Yeni bir makine anahtarı oluşturmanız gerekiyor."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr ""
+#~ "ssh-keysign'ın root haklarıyla kurulmasını (SUID root) ister misiniz?"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr ""
+#~ "ssh-keysign yardımcı aracının SUID bit'i etkinleştirilerek kurulması "
+#~ "seçeneğine sahipsiniz."
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "Eğer ssh-keysign'ı SUID yaparsanız, SSH'ın makine tabanlı Protokol 2 "
+#~ "yetkilendirmesini kullanabileceksiniz."
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "Bu konuda şüpheliyseniz, size SUID'li kurulumu öneririm. Eğer bu "
+#~ "sorunlara yol açarsa ileride fikrinizi değiştirmek için şu komutu "
+#~ "çalıştırabilirsiniz: dpkg-reconfigure ssh"
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "Sadece SSH protokol 2'ye izin ver"
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "OpenSSH'ın bu sürümü ssh'ın çok daha güvenli olan sürüm 2 protokolünü "
+#~ "destekler. Sürüm 1 protokolünün etkisizleştirilmesini teşvik ediyoruz, "
+#~ "bununla beraber böyle yapılması halinde düşük düzeyli makinelerde "
+#~ "işlemler yavaşlayacak ve eski sürüm ssh istemcilerinden (\"potato\" ile "
+#~ "birlikte gelen ssh istemcisi gibi) bağlantı kurulamayacaktır."
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "Protokol 1 anahtarları çok farklı olduğundan, sadece protokol 2 "
+#~ "bağlantılarına izin vermeniz halinde bu anahtarları kullanamayacağınızı "
+#~ "da lütfen not edin."
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "Bu ayar hakkındaki fikriniz ileride değişirse, sshd_config dosyasında "
+#~ "yapacağınız işlemlerle ilgili talimatları README.Debian dosyasında "
+#~ "bulabilirsiniz."
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr ""
+#~ "NOT: X11 yönlendirme ve yetkilendirmesi öntanımlı olarak "
+#~ "etkisizleÅŸtirilmiÅŸtir."
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "Güvenlik gerekçeleriyle ssh'ın Debian sürümünde ForwardX11 ve "
+#~ "ForwardAgent seçenekleri öntanımlı ``off'' değerine ayarlıdır."
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "Güvendiğiniz sunucular için bu seçeneği yapılandırma dosyalarından "
+#~ "birinde veya -X komut satırı seçeneğiyle etkinleştirebilirsiniz."
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr ""
+#~ "Daha ayrıntılı bilgi /usr/share/doc/ssh/README.Debian dosyasında "
+#~ "bulunabilir."
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "yapılandırma dosyalarındaki ssh2 anahtarları birleştirildi"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "Sürüm 3 itibarıyla OpenSSH artık, ssh1 ve ssh2 için ayrı yapılandırma "
+#~ "dosyaları kullanmamaktadır. Bu, authorized_keys2 ve known_hosts2 "
+#~ "dosyalarının artık gerekmediği anlamına gelir. Geriye doğru uyumluluğu "
+#~ "korumak için bu dosyalar yine de okunacaktır."
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "SSH sunucusu sshd'yi çalıştırmak istiyor musunuz?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Bu paket hem ssh istemcisini hem de sshd sunucusunu içeriyor."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Güvenli Kabuk Sunucusu sshd, normalde ssh ile uzaktan girişlere izin "
+#~ "vermek için çalıştırılacaktır."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Eğer amacınız sadece bu makinedeki dış bağlantılar için ssh istemcisini "
+#~ "kullanmak ise ve bu makineye ssh'la girmek gibi bir ÅŸeyi de "
+#~ "istemiyorsanız, sshd sunucusunu bu adımda etkisizleştirebilirsiniz."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Anahtarlara ilişkin ortam seçenekleri geçerliliğini kaybetmiştir"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "OpenSSH'ın bu sürümü belirli atakları önlemek için (ör. LD_PRELOAD) ortak "
+#~ "anahtarlara ait ortam seçeneklerini öntanımlı olarak etkisizleştirir. "
+#~ "Eğer bu seçeneği bir authorized_keys dosyasında kullanıyorsanız, ilgili "
+#~ "seçenek silininceye kadar bu anahtarın artık çalışmayacağını unutmayın."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Bu seçeneği tekrar etkinleştirmek için, sshd_config(5) kılavuz "
+#~ "sayfasındaki uyarı notunu dikkate alarak, sshd yükseltmesi "
+#~ "tamamlandığında /etc/ssh/ssh_config dosyasında \"PermitUserEnvironment yes"
+#~ "\" satırını kullanın."
diff --git a/debian/po/uk.po b/debian/po/uk.po
new file mode 100644
index 000000000..9a5f552c4
--- /dev/null
+++ b/debian/po/uk.po
@@ -0,0 +1,333 @@
+# translation of openssh to Ukrainian
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
+#    Developers do not need to manually edit POT or PO files.
+# Eugeniy Meshcheryakov <eugen@univ.kiev.ua>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh-uk\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2005-03-28 22:28+0300\n"
+"Last-Translator: Eugeniy Meshcheryakov <eugen@univ.kiev.ua>\n"
+"Language-Team: Ukrainian\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.9.1\n"
+"Plural-Forms:  nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
+"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Створити новий файл налаштувань"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"В цій вер�ії OpenSSH значно змінений файл налаштувань, в порівн�нні з "
+"вер�ією, що входила в Debian 'Potato', і �ку ви, �хоже, оновлюєте. Зараз "
+"можна �творити новий файл налаштувань (/etc/ssh/sshd.config), що буде "
+"працювати з новою вер�ією �ервера, але не буде мі�тити будь-�кі зміни, �кі "
+"ви вне�ли у �тару вер�ію."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Зауважте, що в новій вер�ії файла налаштувань змінна 'PermitRootLogin' буде "
+"мати значенн� yes (що означає, що будь-�ка людина, котра знає пароль "
+"кори�тувача root, зможе увійти в �и�тему через ssh). �а думку "
+"�упроводжуючого пакунку - це вірне значенн� за замовчанн�м (дивіть�� також "
+"README.Debian), але ви завжди можете змінити значенн� цього параметра у "
+"файлі sshd_config."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr "Рекомендуєть�� дозволити �творити новий файл налаштувань."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+"Чи бажаєте ви продовжувати (та ризикувати втратити активні �еан�и ssh)?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Вер�і� /etc/init.d/ssh, �ку ви в�тановили, імовірно зупинить в�і запущені "
+"проце�и sshd. Якщо ви оновлюєте�� через ssh, це буде Погана річ (tm)."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Ви можете виправити це, додавши \"--pidfile /var/run/sshd.pid\" до р�дка з "
+"викликом start-stop-daemon в ча�тині зупинки цього файла."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "Попередженн�: rsh-server в�тановлений - це погана іде�"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"В�тановлений rsh-server знижує рівень безпеки, �кий ви, можливо, хотіли "
+"отримати в�тановивши ssh. Рекомендуєть�� видалити цей пакунок."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Попередженн�: telnetd в�тановлений - це погана іде�"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Рекомендуєть�� або видалити пакунок telnetd (�кщо вам не потрібно надавати "
+"до�туп через telnet), або в�тановити telnetd-ssl, щоб мати можливі�ть не "
+"передавати незашифровані логін/пароль та іншу інформацію через мережу."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Попередженн�: ви повинні �творити новий ключ вузла"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Старий ключ в /etc/ssh/ssh_host_key зашифрований за допомогою IDEA. OpenSSH "
+"не може обробл�ти такий файл ключа вузла, також неможливо знайти програму "
+"ssh-keygen зі �тарої (невільної) вер�ії SSH."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Вам потрібно �творити новий ключ вузла."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr "Заборонити автентифікацію запит-відповідь?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"Схоже, що автентифікаці� з викори�танн�м паролів заборонена у поточній "
+"конфігурації �ервера OpenSSH. Щоб перешкодити кори�тувачам реє�трувати�� з "
+"викори�танн�м паролів (можливо, дл� автентифікації тільки за допомогою "
+"відкритих ключів) з о�танніми вер�і�ми OpenSSH, необхідно заборонити "
+"автентифікацію виклик-відгук або впевнити��, що налаштуванн� PAM не "
+"дозвол�ють автентифікацію за допомогою файла паролів Unix."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Якщо ви забороните автентифікацію виклик-відгук, то ваші кори�тувачі не "
+"зможуть реє�трувати�� викори�товуючи паролі. Якщо ви залишите її дозволеною "
+"(відповідь за замовчанн�м), то опці� 'PasswordAuthentication no' не буде "
+"мати кори�ного ефекту доки ви не при�то�уєте також налаштуванн� PAM в /etc/"
+"pam.d/ssh."
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "Чи бажаєте ви, щоб ssh-keysign мав в�тановлений біт SUID?"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr "Ви маєте можливі�ть в�тановити біт SUID дл� програми ssh-keysign."
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "Якщо ви в�тановите біт SUID дл� ssh-keysign, ви зможете викори�товувати "
+#~ "вузлову автентифікацію протоколу SSH вер�ії 2."
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "Якщо �умніваєте�ь, то рекомендуєть�� дозволити в�тановити біт SUID. Якщо "
+#~ "це викликатиме проблеми, ви зможете в�е змінити запу�тивши dpkg-"
+#~ "reconfigure ssh"
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "Дозволити тільки SSH-протокол вер�ії 2"
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "Ц� вер�і� OpenSSH підтримує вер�ію 2 протоколу SSH, �ка є більш "
+#~ "безпечною. Рекомендуєть�� заборонити вер�ію 1, однак це може уповільнити "
+#~ "роботу на �лабких �и�темах та зробити неможливим з'єднанн� з "
+#~ "викори�танн�м �тарих клієнтів (включно з клієнтом ssh з \"potato\")."
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "Також зверніть увагу, що ключі дл� вер�ії 1 відрізн�ють�� від ключів дл� "
+#~ "вер�ії 2, тому ви не зможете викори�товувати їх, �кщо дозволите з'єднанн� "
+#~ "тільки по протоколу вер�ії 2."
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "Якщо ви пізніше передумаєте щодо цього параметра, файл README.Debian "
+#~ "мі�тить ін�трукції щодо вне�енн� змін до файла sshd_config."
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "ssh2-ключі злиті у файлах налаштувань"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "У вер�ії 3 OpenSSH більше не викори�товує окремі файли дл� ключів ssh1 та "
+#~ "ssh2. Це означає, що файли authorized_keys2 та known_hosts2 більше "
+#~ "непотрібні. Вони будуть читати�� з метою забезпеченн� зворотної "
+#~ "�умі�но�ті."
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr ""
+#~ "З�УВ�ЖЕ��Я: Форвардинг X11 та Authorization заборонені за замовчанн�м."
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "З міркувань безпеки в Debian-вер�ії ssh параметри ForwardX11 та "
+#~ "ForwardAgent за замовчанн�м мають значенн� \"off\"."
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "Ви можете дозволити їх дл� �ерверів, �ким довір�єте, або у одному з "
+#~ "файлів налаштувань, або за допомогою параметра командного р�дка -X."
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr "Подробиці можна прочитати у файлі /usr/share/doc/ssh/README.Debian"
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "Чи бажаєте ви запу�тити �ервер sshd?"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "Цей пакунок мі�тить �к клієнт ssh, так і �ервер sshd."
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr ""
+#~ "Звичайно sshd (Secure Shell Server) запу�каєть�� щоб зробити можливим "
+#~ "віддалену реє�трацію в �и�темі за допомогою ssh."
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "Якщо ва� цікавить викори�танн� тільки клієнта ssh на цій машині і ви не "
+#~ "бажаєте реє�трувати�� на ній викори�товуючи ssh, тоді ви можете "
+#~ "заборонити sshd."
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "Опції оточенн� дл� ключів не повинні викори�товувати��"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "В цій вер�ії OpenSSH, з метою уникненн� де�ких атак (наприклад "
+#~ "LD_PRELOAD), за замовчанн�м заборонені опції оточенн� дл� відкритих "
+#~ "ключів. Якщо ви викори�товуєте цю опцію у файлі authorized_keys, майте на "
+#~ "увазі, що ключі з такими опці�ми не будуть працювати, доки опці� не буде "
+#~ "видалена."
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "Щоб дозволити цю опцію, в�тановіть \"PermitUserEnvironment yes\" в /etc/"
+#~ "ssh/sshd_config пі�л� завершенн� оновленн�; зверніть увагу на "
+#~ "попередженн� на �торінці підручника sshd_config(5)."
diff --git a/debian/po/vi.po b/debian/po/vi.po
new file mode 100644
index 000000000..0b60ce6ba
--- /dev/null
+++ b/debian/po/vi.po
@@ -0,0 +1,197 @@
+# Vietnamese translation for openssh.
+# Copyright © 2005 Free Software Foundation, Inc.
+# Clytie Siddall <clytie@riverland.net.au>, 2005.
+# 
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh 1/4.1p1-4\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2005-07-02 22:30+0930\n"
+"Last-Translator: Clytie Siddall <clytie@riverland.net.au>\n"
+"Language-Team: Vietnamese <gnomevi-list@lists.sourceforge.net>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=utf-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0\n"
+"X-Generator: LocFactoryEditor 1.2.2\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "Tao ra tập tin cấu hình mới"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"Phiên bản OpenSSH này có một tập tin cấu hình đã thay đổi nhi�u từ phiên bản "
+"được phát hành trong mức độ phát hành «Potato» của Debian, mà hình như phiên "
+"bản mà bạn đang cập nhật từ nó. Lúc này trình này có thể tạo ra cho bạn một "
+"tập tin cấu hình mới («/etc/ssh/sshd.config»), mà sẽ hoạt động với phiên bản "
+"trình phục vụ mới, nhưng mà sẽ không chứa cách tùy chỉnh nào mà bạn đã tạo "
+"trong phiên bản cũ."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"Hãy ghi chú rằng tập tin cấu hình mới này sẽ lập giá trị của "
+"«PermitRootLogin» (cho phép đăng nhập ngư�i chủ) là «yes» (có), mà có nghĩa "
+"là bất cứ ngư�i nào có biết mật khẩu ngư�i chủ thì có thê «ssh» trực tiếp "
+"với tư cách ngư�i chủ. Ngư�i bảo quản đệ nghị thiết lập này là mặc định đúng "
+"(hãy xem tập tin «README.Debian» để tìm chi tiết), nhưng mà bạn vẫn còn có "
+"thể tự sửa đổi tập tin «sshd_config» và lập giá trị ấy là «no» (không) nếu "
+"bạn muốn."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr ""
+"Khuyến khích nặng là bạn cho phép trình này tạo ra một tập tin cấu hình mới "
+"cho bạn."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr ""
+"Bạn có muốn tiếp tục (thì rủi ro buộc kết thức của phiên làm việc ssh hoặt "
+"động nào) không?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"Bạn đã cài đặt một phiên bản «/etc/init.d/ssh» mà rất có thể buộc kết thức "
+"của m�i lần chạy sshd hiện th�i. Nếu bạn có nâng cấp thông qua một phiên làm "
+"việc ssh, làm như thế là một �i�u Xấu™."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"Bạn có thể sửa trư�ng hợp này bằng cách thêm «--pidfile /var/run/sshd.pid» "
+"vào dòng «start-stop-daemon» trong phần «stop» của tập tin ấy."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr ""
+"Cảnh báo: «rsh-server» được cài đặt — rất không có thể là một ý kiến tốt."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"Khi «rsh-server» được cài đặt thì làm hao mòn mức độ bảo mật mà bạn muốn "
+"được bằng cách sử dụng ssh. Khuyên bạn loại b� gói tin ấy."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "Cảnh báo: «telnetd» đã được cài đặt — rất không thể là một ý kiến tốt."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"Khuyên bạn hoặc loại b� gói tin «telnetd» (nếu bạn không thật sự cần cung "
+"cấp cách truy cập telnet) hoặc cài đặt gói tin «telnetd-ssl» để cố tránh "
+"chạy phiên telnet có gởi thông tin đăng nhập/mật khẩu và thông tin phiên làm "
+"việc không mật mã qua mạng."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "Cảnh báo: bạn phải tạo một khóa máy mới"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"Có một khóa máy «/etc/ssh/ssh_host_key» cũ được mặt mã cách IDEA. Trình "
+"OpenSSH không thể quản lý tập tin khóa máy này, và trình này không thể tìm "
+"tiện ích «ssh-keygen» từ bản cài đặt SSH cũ (không phải tự do)."
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "Bạn sẽ cần phải tạo một khóa máy mới."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr "Vô hiệu hóa xác thực cách yêu cầu/đáp ứng không?"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+"Hình như xác thực cách mật khẩu bị tắt trong cấu hình trình phục vụ OpenSSH "
+"của bạn. �ể cản trở ngư�i dùng đăng nhập dùng mặt khẩu (có thể dùng chỉ xác "
+"thực cách khóa công thay vào đó) với phiên bản gần đây của OpenSSH, bạn phải "
+"vô hiệu hóa xác thực cách yêu cầu/đáp ứng, hoặc đảm bảo cấu hình PAM của bạn "
+"không cho phép xác thực cách tập tin mật khẩu Unix."
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+"Nếu bạn vô hiệu hóa xác thực cách yêu cầu/đáp ứng thì ngư�i dùng sẽ không "
+"thể đăng nhập dùng mật khẩu. Nếu bạn cho phép nó bật (tùy ch�n mặc định) thì "
+"tùy ch�n «'PasswordAuthentication no» (xác thực mật khẩu không) sẽ không có "
+"tác dụng có ích nào, nếu bạn không cũng tùy chỉnh cấu hình bạn trong «/etc/"
+"pam.d/ssh»."
diff --git a/debian/po/zh_CN.po b/debian/po/zh_CN.po
new file mode 100644
index 000000000..8cd519837
--- /dev/null
+++ b/debian/po/zh_CN.po
@@ -0,0 +1,343 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: openssh 3.6.1p2-11\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-05-31 03:26+0100\n"
+"PO-Revision-Date: 2004-02-02 18:48+1300\n"
+"Last-Translator: Hiei Xu <nicky@mail.edu.cn>\n"
+"Language-Team: Chinese/Simplified <i18n-translation@lists.linux.net.cn>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid "Generate new configuration file"
+msgstr "生�新的�置文件"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"This version of OpenSSH has a considerably changed configuration file from "
+"the version shipped in Debian 'Potato', which you appear to be upgrading "
+"from. I can now generate you a new configuration file (/etc/ssh/sshd."
+"config), which will work with the new server version, but will not contain "
+"any customisations you made with the old version."
+msgstr ""
+"看�您正在从 Debian “Potato��级，当�版本和 Debian “Potato�所带的 OpenSSH 版"
+"本的�置文件对比有了相当多的改�。我现在�以生�适用于新�务器版本的新�置文"
+"件 (/etc/ssh/sshd_config)，但是它�会�留您为旧版本定制的任何�置。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"Please note that this new configuration file will set the value of "
+"'PermitRootLogin' to yes (meaning that anyone knowing the root password can "
+"ssh directly in as root). It is the opinion of the maintainer that this is "
+"the correct default (see README.Debian for more details), but you can always "
+"edit sshd_config and set it to no if you wish."
+msgstr ""
+"请注�新的�置文件将会把“PermitRootLogin�的值设置为 yes，(这�味�任何一个知"
+"� root 密�的人都�以直接以 root 登录)。维护者认为这是一个正确的默认值 (详情"
+"请阅读 README.Debian)，但如果您希望，也�以编辑 sshd_config 文件将其设置为 "
+"no。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:4
+msgid ""
+"It is strongly recommended that you let me generate a new configuration file "
+"for you."
+msgstr "强烈建议让我为您生�一份新的�置文件。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid "Do you want to continue (and risk killing active ssh sessions)?"
+msgstr "您�继续�(会有�死活动的 ssh 会�的�险)？"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"The version of /etc/init.d/ssh that you have installed, is likely to kill "
+"all running sshd instances.  If you are doing this upgrade via an ssh "
+"session, that would be a Bad Thing(tm)."
+msgstr ""
+"您安装的 /etc/init.d/ssh 版本很�能会�死所有�行中的 sshd 例程。如果您是在通"
+"过 ssh 会�进行这项�级，那�真是件糟糕的事情(tm)。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:23
+msgid ""
+"You can fix this by adding \"--pidfile /var/run/sshd.pid\" to the start-stop-"
+"daemon line in the stop section of the file."
+msgstr ""
+"您�以通过添加“--pidfile /var/run/sshd.pid�到这个文件的 stop 部分的 start-"
+"stop-daemon 行�修正这个问题。"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid "Warning: rsh-server is installed --- probably not a good idea"
+msgstr "警告：已�安装了 rsh �务器 --- �能�是个好主�"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:33
+msgid ""
+"having rsh-server installed undermines the security that you were probably "
+"wanting to obtain by installing ssh.  I'd advise you to remove that package."
+msgstr ""
+"安装 rsh �务器很�能会�低您想�通过安装 ssh 得到的安全性。我建议您删除这个"
+"包。"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid "Warning: telnetd is installed --- probably not a good idea"
+msgstr "警告：已�安装了 telnetd �务器 --- �能�是个好主�"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:40
+msgid ""
+"I'd advise you to either remove the telnetd package (if you don't actually "
+"need to offer telnet access) or install telnetd-ssl so that there is at "
+"least some chance that telnet sessions will not be sending unencrypted login/"
+"password and session information over the network."
+msgstr ""
+"我建议您删除 telnetd 包(如果您�是真的需��供 telnet 访问)，或者安装 "
+"telnetd-ssl，这样至少有时候 telnet 会��会将未加密的 登录�/密� 和会�信�"
+"通过网络��。"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "Warning: you must create a new host key"
+msgstr "警告：您必须创建一个新的主机密钥"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid ""
+"There is an old /etc/ssh/ssh_host_key, which is IDEA encrypted. OpenSSH can "
+"not handle this host key file, and I can't find the ssh-keygen utility from "
+"the old (non-free) SSH installation."
+msgstr ""
+"/etc/ssh/ssh_host_key 是由 IDEA 加密的旧密钥文件。OpenSSH �能处�这�密钥文"
+"件，我也无法找到旧的(�自由的) SSH 安装所带的 ssh-keygen 密钥生�工具。"
+
+#. Type: note
+#. Description
+#: ../openssh-server.templates.master:48
+msgid "You will need to generate a new host key."
+msgstr "您需�创建一个新的主机密钥。"
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid "Disable challenge-response authentication?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"Password authentication appears to be disabled in your current OpenSSH "
+"server configuration. In order to prevent users from logging in using "
+"passwords (perhaps using only public key authentication instead) with recent "
+"versions of OpenSSH, you must disable challenge-response authentication, or "
+"else ensure that your PAM configuration does not allow Unix password file "
+"authentication."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../openssh-server.templates.master:58
+msgid ""
+"If you disable challenge-response authentication, then users will not be "
+"able to log in using passwords. If you leave it enabled (the default "
+"answer), then the 'PasswordAuthentication no' option will have no useful "
+"effect unless you also adjust your PAM configuration in /etc/pam.d/ssh."
+msgstr ""
+
+#~ msgid "Do you want ssh-keysign to be installed SUID root?"
+#~ msgstr "您�将 ssh-keysign 安装为 SUID root 程��？"
+
+#~ msgid ""
+#~ "You have the option of installing the ssh-keysign helper with the SUID "
+#~ "bit set."
+#~ msgstr "您使用为 ssh-keysign 帮助者程�设置 SUID �的选项。"
+
+#~ msgid ""
+#~ "If you make ssh-keysign SUID, you will be able to use SSH's Protocol 2 "
+#~ "host-based authentication."
+#~ msgstr ""
+#~ "如果您为 ssh-keysign 设置了 SUID，您将�以使用 SSH �议 2 的基于主机的认�"
+#~ "方�。"
+
+#~ msgid ""
+#~ "If in doubt, I suggest you install it with SUID.  If it causes problems "
+#~ "you can change your mind later by running:   dpkg-reconfigure ssh"
+#~ msgstr ""
+#~ "如果有疑问，我建议您将它安装为 SUID。如果它带�麻烦，您�以通过�行：dpkg-"
+#~ "reconfigure ssh �改�主�"
+
+#~ msgid "Allow SSH protocol 2 only"
+#~ msgstr "��许 SSH �议 2 (ssh2)。"
+
+#~ msgid ""
+#~ "This version of OpenSSH supports version 2 of the ssh protocol, which is "
+#~ "much more secure.  Disabling ssh 1 is encouraged, however this will slow "
+#~ "things down on low end machines and might prevent older clients from "
+#~ "connecting (the ssh client shipped with \"potato\" is affected)."
+#~ msgstr ""
+#~ "这个版本的 OpenSSH 支�更加安全的第二版本 ssh �议。我们鼓励您�用 ssh 1，"
+#~ "然而这会�低低端机器速度，并且会阻止�版客户端的连接(“potato�所带的 ssh 客"
+#~ "户端会�到影�)。"
+
+#~ msgid ""
+#~ "Also please note that keys used for protocol 1 are different so you will "
+#~ "not be able to use them if you only allow protocol 2 connections."
+#~ msgstr ""
+#~ "也请注��议 1 所用的密钥是��的，因此如果您��许�议 2 连接将会导致�能"
+#~ "使用它们。"
+
+#~ msgid ""
+#~ "If you later change your mind about this setting, README.Debian has "
+#~ "instructions on what to do to your sshd_config file."
+#~ msgstr ""
+#~ "如果您��想改�这个设置，README.Debian 上有说明告诉您如何修改 "
+#~ "sshd_Config 文件。"
+
+#~ msgid "NOTE: Forwarding of X11 and Authorization disabled by default."
+#~ msgstr "注�：X11 转�和认�默认被�止。"
+
+#~ msgid ""
+#~ "For security reasons, the Debian version of ssh has ForwardX11 and "
+#~ "ForwardAgent set to ``off'' by default."
+#~ msgstr ""
+#~ "因为安全性原因，默认情况下 Debian 版本的 ssh 将 ForwardX11 和 "
+#~ "ForwardAgent 设置为 off。"
+
+#~ msgid ""
+#~ "You can enable it for servers you trust, either in one of the "
+#~ "configuration files, or with the -X command line option."
+#~ msgstr ""
+#~ "您�以为信赖的�务器�用这个选项，�以通过其中之一的�置文件或者使用 -X 命"
+#~ "令行选项�实现。"
+
+#~ msgid "More details can be found in /usr/share/doc/ssh/README.Debian"
+#~ msgstr "更多细节�以在 /usr/share/doc/ssh/README.Debian 找到"
+
+#~ msgid "ssh2 keys merged in configuration files"
+#~ msgstr "ssh2 密钥被�并到�置文件"
+
+#~ msgid ""
+#~ "As of version 3 OpenSSH no longer uses separate files for ssh1 and ssh2 "
+#~ "keys. This means the authorized_keys2 and known_hosts2 files are no "
+#~ "longer needed. They will still be read in order to maintain backwards "
+#~ "compatibility"
+#~ msgstr ""
+#~ "在 OpenSSH 第 3 版��为 ssh1 和 ssh2 的密钥使用��的文件。这�味� "
+#~ "authorized_keys2 和 known_hosts2 文件将��需�。但为了����兼容性，它"
+#~ "们�会被读�。"
+
+#~ msgid "Do you want to run the sshd server?"
+#~ msgstr "您��行 sshd �务器�？"
+
+#~ msgid "This package contains both the ssh client, and the sshd server."
+#~ msgstr "这个软件包内� ssh 客户端和 sshd �务器。"
+
+#~ msgid ""
+#~ "Normally the sshd Secure Shell Server will be run to allow remote logins "
+#~ "via ssh."
+#~ msgstr "通常 sshd 安全 Shell �务器都会�行以便�许通过 ssh 进行远程登录。"
+
+#~ msgid ""
+#~ "If you are only interested in using the ssh client for outbound "
+#~ "connections on this machine, and don't want to log into it at all using "
+#~ "ssh, then you can disable sshd here."
+#~ msgstr ""
+#~ "如果您��在这�机器上使用 ssh 客户端对外连接，完全�想通过 ssh 登录到本"
+#~ "机，那么您�以在这里�用 sshd �务器。"
+
+#~ msgid "Environment options on keys have been deprecated"
+#~ msgstr "密钥的环境选项已被废弃"
+
+#~ msgid ""
+#~ "This version of OpenSSH disables the environment option for public keys "
+#~ "by default, in order to avoid certain attacks (for example, LD_PRELOAD). "
+#~ "If you are using this option in an authorized_keys file, beware that the "
+#~ "keys in question will no longer work until the option is removed."
+#~ msgstr ""
+#~ "为了��一些攻击(如 LD_PRELOAD)，这个版本的 OpenSSH 默认�用了公钥上的环境"
+#~ "选项。如果您在�个授�密钥(authorized_keys)文件中用了这个�数，请注�除�"
+#~ "删除了此选项，�则这个�疑的密钥将��起作用。"
+
+#~ msgid ""
+#~ "To re-enable this option, set \"PermitUserEnvironment yes\" in /etc/ssh/"
+#~ "sshd_config after the upgrade is complete, taking note of the warning in "
+#~ "the sshd_config(5) manual page."
+#~ msgstr ""
+#~ "��新�用这个选项，�级完��请在 /etc/ssh/sshd_config 中加入一"
+#~ "行：“PermitUserEnvironment yes�。请注� sshd_config(5) 手册页中�到的警"
+#~ "告。"
+
+#~ msgid "Privilege separation"
+#~ msgstr "��分离"
+
+#~ msgid ""
+#~ "Privilege separation is turned on by default, so if you decide you want "
+#~ "it turned off, you need to add \"UsePrivilegeSeparation no\" to /etc/ssh/"
+#~ "sshd_config."
+#~ msgstr ""
+#~ "��分离选项是默认打开的。如果想�关闭此选项，您需�在 /etc/ssh/"
+#~ "sshd_config 文件中添加一行“UsePrivilegeSeparation no�。"
+
+#~ msgid "Enable Privilege separation"
+#~ msgstr "�用��分离"
+
+#~ msgid ""
+#~ "This version of OpenSSH contains the new privilege separation option. "
+#~ "This significantly reduces the quantity of code that runs as root, and "
+#~ "therefore reduces the impact of security holes in sshd."
+#~ msgstr ""
+#~ "这个版本的 OpenSSH 包�了一个新的��分离的选项，目的是为了�少以 root �"
+#~ "行的代�数目，进而�少了 sshd 被安全�洞影�的机会。"
+
+#~ msgid ""
+#~ "Unfortunately, privilege separation interacts badly with PAM. Any PAM "
+#~ "session modules that need to run as root (pam_mkhomedir, for example) "
+#~ "will fail, and PAM keyboard-interactive authentication won't work."
+#~ msgstr ""
+#~ "�幸的是，��分离和 PAM �时使用会很糟糕。任何需�以 root �行的 PAM 会�"
+#~ "模� (如 pam_mkhomedir) 都会失败，而且 PAM 键盘交互�认�都�起作用。"
+
+#~ msgid ""
+#~ "Since you've opted to have me generate an sshd_config file for you, you "
+#~ "can choose whether or not to have privilege separation turned on or not. "
+#~ "Unless you know you need to use PAM features that won't work with this "
+#~ "option, you should enable it."
+#~ msgstr ""
+#~ "因为您选择了让我为您生� sshd_config 文件，您�以选择是�打开��分离选"
+#~ "项。除�您知�需�使用 PAM 这个�能和��分离�时工作的功能，�则就应该�"
+#~ "用它。"
diff --git a/debian/rules b/debian/rules
new file mode 100755
index 000000000..422fafaf9
--- /dev/null
+++ b/debian/rules
@@ -0,0 +1,296 @@
+#!/usr/bin/make -f
+
+# Uncomment this to turn on verbose mode.
+# export DH_VERBOSE=1
+
+# This has to be exported to make some magic below work.
+export DH_OPTIONS
+
+ifeq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+OPTFLAGS := -O2
+else
+OPTFLAGS := -O0
+endif
+
+DEB_HOST_ARCH_OS := $(shell dpkg-architecture -qDEB_HOST_ARCH_OS 2>/dev/null)
+
+# Take account of old dpkg-architecture output.
+ifeq ($(DEB_HOST_ARCH_OS),)
+  DEB_HOST_ARCH_OS := $(subst -gnu,,$(shell dpkg-architecture -qDEB_HOST_GNU_SYSTEM))
+  ifeq ($(DEB_HOST_ARCH_OS),gnu)
+    DEB_HOST_ARCH_OS := hurd
+  endif
+endif
+
+ifeq (,$(wildcard /usr/bin/po2debconf))
+PO2DEBCONF := no
+MINDEBCONFVER := 0.5
+else
+PO2DEBCONF := yes
+MINDEBCONFVER := 1.2.0
+endif
+
+# We need a new libpam-runtime for sane PAM handling
+# (http://lists.debian.org/debian-devel-announce-0308/msg00012.html).
+# Unfortunately it's hard to detect during the build whether this is
+# appropriate, so woody-compatibility is a pain. I've had to punt and go for
+# a DEB_BUILD_SSH_WOODY environment variable. We can remove this hack once
+# we no longer care about woody.
+ifeq ($(DEB_BUILD_SSH_WOODY),)
+PAMSUBST := no
+PAMDEP := libpam-runtime (>= 0.76-14)
+else
+PAMSUBST := yes
+PAMDEP := libpam-runtime
+endif
+
+# The Hurd needs libcrypt for res_query et al.
+ifeq ($(DEB_HOST_ARCH_OS),hurd)
+FORCE_LIBS := LIBS=-lcrypt
+endif
+
+# SELinux support?
+ifeq ($(DEB_HOST_ARCH_OS),linux)
+SELINUX := --with-selinux
+endif
+
+# Change the version string to include the Debian version
+SSH_EXTRAVERSION := Debian-$(shell dpkg-parsechangelog | sed -n -e '/^Version:/s/Version: //p' | sed -e 's/[^-]*-//')
+
+build: build-deb build-udeb
+
+build-deb: build-deb-stamp
+build-deb-stamp:
+        dh_testdir
+        mkdir -p build-deb
+        cd build-deb && $(FORCE_LIBS) ../configure --prefix=/usr --sysconfdir=/etc/ssh --libexecdir=/usr/lib/openssh --mandir=/usr/share/man --with-tcp-wrappers --with-xauth=/usr/bin/X11/xauth --with-default-path=/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games --with-superuser-path=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11 --with-pam --with-4in6 --with-privsep-path=/var/run/sshd --without-rand-helper --with-libedit --with-kerberos5=/usr $(SELINUX)
+
+ifeq ($(DEB_HOST_ARCH_OS),linux)
+        # Some 2.2 kernels have trouble with setres[ug]id() (bug #239999).
+        perl -pi -e 's/.*#undef (BROKEN_SETRES[UG]ID).*/#define $$1 1/' build-deb/config.h
+endif
+        # Debian's /var/log/btmp has inappropriate permissions.
+        perl -pi -e 's,.*#define USE_BTMP .*,/* #undef USE_BTMP */,' build-deb/config.h
+
+        $(MAKE) -C build-deb -j 2 ASKPASS_PROGRAM='/usr/bin/ssh-askpass' CFLAGS='$(OPTFLAGS) -g -Wall -Wpointer-arith -Wuninitialized -Wsign-compare -std=gnu99 -DLOGIN_PROGRAM=\"/bin/login\" -DLOGIN_NO_ENDOPT -DSSHD_PAM_SERVICE=\"ssh\" -DSSH_EXTRAVERSION="\" $(SSH_EXTRAVERSION)\""'
+        # Support building on Debian 3.0 (with GNOME 1.4) and later.
+        if [ -f /usr/include/libgnomeui-2.0/gnome.h ]; then \
+                $(MAKE) -C contrib gnome-ssh-askpass2 CC='gcc $(OPTFLAGS) -g -Wall'; \
+        elif [ -f /usr/include/gnome-1.0/gnome.h ]; then \
+                $(MAKE) -C contrib gnome-ssh-askpass1 CC='gcc $(OPTFLAGS) -g -Wall'; \
+        fi
+
+        touch build-deb-stamp
+
+build-udeb: build-udeb-stamp
+build-udeb-stamp:
+        dh_testdir
+        mkdir -p build-udeb
+        cd build-udeb && $(FORCE_LIBS) ../configure --prefix=/usr --sysconfdir=/etc/ssh --libexecdir=/usr/lib/openssh --without-xauth --with-default-path=/usr/local/bin:/usr/bin:/bin --with-superuser-path=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin --with-4in6 --with-privsep-path=/var/run/sshd --without-rand-helper
+        # Debian's /var/log/btmp has inappropriate permissions.
+        perl -pi -e 's,.*#define USE_BTMP .*,/* #undef USE_BTMP */,' build-udeb/config.h
+        # Avoid libnsl linkage. Ugh.
+        perl -pi -e 's/ +-lnsl//' build-udeb/config.status
+        cd build-udeb && ./config.status
+        $(MAKE) -C build-udeb -j 2 ASKPASS_PROGRAM='/usr/bin/ssh-askpass' CFLAGS='-Os -g -Wall -Wpointer-arith -Wuninitialized -Wsign-compare -std=gnu99 -DSSH_EXTRAVERSION="\" $(SSH_EXTRAVERSION)\""' ssh scp sftp sshd ssh-keygen
+        touch build-udeb-stamp
+
+clean:
+        dh_testdir
+        rm -f build-deb-stamp build-udeb-stamp
+        rm -rf build-deb build-udeb
+        -$(MAKE) -C contrib clean
+        rm -f config.log
+ifeq ($(PO2DEBCONF),yes)
+        # Hack for woody compatibility. This makes sure that the
+        # debian/templates file shipped in the source package doesn't
+        # specify encodings, which woody's debconf can't handle. If building
+        # on a system with po-debconf installed (conveniently debhelper (>=
+        # 4.1.16) depends on it), the binary-arch target will generate a
+        # better version for sarge.
+        echo '1 popular' > debian/po/output
+        po2debconf debian/openssh-server.templates.master > debian/openssh-server.templates
+        rm -f debian/po/output
+endif
+ifeq ($(PAMSUBST),yes)
+        if [ -f debian/ssh.pam.new-style ]; then \
+                mv debian/ssh.pam.new-style debian/ssh.pam; \
+        fi
+endif
+        rm -f debian/ssh-askpass-gnome.png
+        dh_clean
+
+install: DH_OPTIONS=-a
+install: build
+        dh_testdir
+        dh_testroot
+        dh_clean -k
+        dh_installdirs
+
+        $(MAKE) -C build-deb DESTDIR=`pwd`/debian/openssh-client install-nokeys
+
+        rm -f debian/openssh-client/etc/ssh/sshd_config
+        #Temporary hack: remove /usr/share/Ssh.bin, since we have no smartcard support anyway.
+        rm -f debian/openssh-client/usr/share/Ssh.bin
+
+        # Split off the server.
+        mv debian/openssh-client/usr/sbin/sshd debian/openssh-server/usr/sbin/
+        mv debian/openssh-client/usr/lib/openssh/sftp-server debian/openssh-server/usr/lib/openssh/
+        mv debian/openssh-client/usr/share/man/man5/sshd_config.5 debian/openssh-server/usr/share/man/man5/
+        mv debian/openssh-client/usr/share/man/man8/sshd.8 debian/openssh-server/usr/share/man/man8/
+        mv debian/openssh-client/usr/share/man/man8/sftp-server.8 debian/openssh-server/usr/share/man/man8/
+        rmdir debian/openssh-client/usr/sbin debian/openssh-client/var/run/sshd
+
+        install -m 755 contrib/ssh-copy-id debian/openssh-client/usr/bin/ssh-copy-id
+        install -m 644 -c contrib/ssh-copy-id.1 debian/openssh-client/usr/share/man/man1/ssh-copy-id.1
+        install -m 644 debian/moduli.5 debian/openssh-client/usr/share/man/man5/moduli.5
+
+        if [ -f contrib/gnome-ssh-askpass2 ]; then \
+                install -s -o root -g root -m 755 contrib/gnome-ssh-askpass2 debian/ssh-askpass-gnome/usr/lib/openssh/gnome-ssh-askpass; \
+        elif [ -f contrib/gnome-ssh-askpass1 ]; then \
+                install -s -o root -g root -m 755 contrib/gnome-ssh-askpass1 debian/ssh-askpass-gnome/usr/lib/openssh/gnome-ssh-askpass; \
+        fi
+        install -m 644 debian/gnome-ssh-askpass.1 debian/ssh-askpass-gnome/usr/share/man/man1/gnome-ssh-askpass.1
+        uudecode -o debian/ssh-askpass-gnome/usr/share/pixmaps/ssh-askpass-gnome.png debian/ssh-askpass-gnome.png.uue
+
+        install -m 755 debian/ssh-argv0 debian/openssh-client/usr/bin/ssh-argv0
+        install -m 644 debian/ssh-argv0.1 debian/openssh-client/usr/share/man/man1/ssh-argv0.1
+
+        install -o root -g root debian/openssh-server.init debian/openssh-server/etc/init.d/ssh
+        install -o root -g root -m 644 debian/openssh-server.default debian/openssh-server/etc/default/ssh
+
+        install -m 755 build-udeb/ssh debian/openssh-client-udeb/usr/bin/ssh
+        install -m 755 build-udeb/scp debian/openssh-client-udeb/usr/bin/scp
+        install -m 755 build-udeb/sftp debian/openssh-client-udeb/usr/bin/sftp
+        install -m 755 build-udeb/sshd debian/openssh-server-udeb/usr/sbin/sshd
+        install -m 755 build-udeb/ssh-keygen debian/openssh-server-udeb/usr/bin/ssh-keygen
+
+# Build architecture-independent files here.
+binary-indep: binary-ssh
+
+# Build architecture-dependent files here.
+binary-arch: binary-openssh-client binary-openssh-server
+binary-arch: binary-ssh-askpass-gnome
+binary-arch: binary-openssh-client-udeb binary-openssh-server-udeb
+
+binary-openssh-client: DH_OPTIONS=-popenssh-client
+binary-openssh-client: build install
+        dh_testdir
+        dh_testroot
+        dh_installdebconf
+        dh_installdocs OVERVIEW README README.dns
+        cat debian/copyright.head LICENCE > debian/openssh-client/usr/share/doc/openssh-client/copyright
+        dh_installchangelogs ChangeLog
+        install -m644 debian/openssh-client.lintian debian/openssh-client/usr/share/lintian/overrides/openssh-client
+        dh_strip
+        dh_compress
+        dh_fixperms
+        chmod u+s debian/openssh-client/usr/lib/openssh/ssh-keysign
+        dh_installdeb
+        test ! -e debian/ssh/etc/ssh/ssh_prng_cmds \
+          || echo "/etc/ssh/ssh_prng_cmds" >> debian/openssh-client/DEBIAN/conffiles
+        dh_shlibdeps
+        dh_gencontrol -- -V'debconf-depends=debconf (>= $(MINDEBCONFVER)) | debconf-2.0'
+        dh_md5sums
+        dh_builddeb
+
+binary-openssh-server: DH_OPTIONS=-popenssh-server
+binary-openssh-server: build install
+        dh_testdir
+        dh_testroot
+ifeq ($(PO2DEBCONF),yes)
+        po2debconf -e utf8 debian/openssh-server.templates.master > debian/openssh-server.templates
+endif
+        dh_installdebconf
+        dh_installdocs
+        mv debian/openssh-server/usr/share/doc/openssh-server debian/openssh-server/usr/share/doc/openssh-client
+        rm -f debian/openssh-server/usr/share/doc/openssh-client/copyright
+ifeq ($(PAMSUBST),yes)
+        # Clean up if we've done this already, to ensure idempotency.
+        if [ -f debian/openssh-server.ssh.pam.new-style ]; then \
+                mv debian/openssh-server.ssh.pam.new-style debian/openssh-server.ssh.pam; \
+        fi
+        cp -a debian/openssh-server.ssh.pam debian/openssh-server.ssh.pam.new-style
+        sed -e "s/@include common-auth/auth       required     pam_unix.so/" \
+            -e "s/@include common-account/account    required     pam_unix.so/" \
+            -e "s/@include common-session/session    required     pam_unix.so/" \
+            -e "s/@include common-password/password   required     pam_unix.so/" \
+            debian/openssh-server.ssh.pam.new-style > debian/openssh-server.ssh.pam
+endif
+        dh_installpam --name ssh # TODO: breaks woody backports
+        dh_link
+        dh_strip
+        dh_compress
+        dh_fixperms
+        dh_installdeb
+        dh_shlibdeps
+        dh_gencontrol -- -V'debconf-depends=debconf (>= $(MINDEBCONFVER)) | debconf-2.0' \
+                         -V'pam-depends=$(PAMDEP)'
+        dh_md5sums
+        dh_builddeb
+
+binary-ssh: DH_OPTIONS=-pssh
+binary-ssh: build install
+        dh_testdir
+        dh_testroot
+        dh_installdocs
+        mv debian/ssh/usr/share/doc/ssh debian/ssh/usr/share/doc/openssh-client
+        rm -f debian/ssh/usr/share/doc/openssh-client/copyright
+        dh_link
+        dh_compress
+        dh_fixperms
+        dh_installdeb
+        dh_gencontrol
+        dh_md5sums
+        dh_builddeb
+
+binary-ssh-askpass-gnome: DH_OPTIONS=-pssh-askpass-gnome
+binary-ssh-askpass-gnome: build install
+        dh_testdir
+        dh_testroot
+        dh_installdocs
+        dh_installexamples debian/ssh-askpass-gnome.desktop
+        dh_installchangelogs ChangeLog
+        dh_strip
+        dh_compress
+        dh_fixperms
+        dh_installdeb
+        dh_shlibdeps
+        dh_gencontrol
+        dh_md5sums
+        dh_builddeb
+
+binary-openssh-client-udeb: DH_OPTIONS=-popenssh-client-udeb
+binary-openssh-client-udeb: build install
+        dh_testdir
+        dh_testroot
+        dh_strip
+        dh_compress
+        dh_fixperms
+        dh_installdeb
+        install -p -o root -g root -m 755 debian/openssh-client-udeb.isinstallable debian/openssh-client-udeb/DEBIAN/isinstallable
+        dh_shlibdeps
+        dh_gencontrol
+        dh_md5sums
+        dh_builddeb
+
+binary-openssh-server-udeb: DH_OPTIONS=-popenssh-server-udeb
+binary-openssh-server-udeb: build install
+        dh_testdir
+        dh_testroot
+        dh_strip
+        dh_compress
+        dh_fixperms
+        dh_installdeb
+        dh_shlibdeps
+        dh_gencontrol
+        dh_md5sums
+        dh_builddeb
+
+binary: binary-indep binary-arch
+
+.PHONY: build clean binary-indep binary-arch binary install
+.PHONY: build-deb build-udeb
+.PHONY: binary-openssh-client binary-openssh-server binary-ssh
+.PHONY: binary-ssh-askpass-gnome
+.PHONY: binary-openssh-client-udeb binary-openssh-server-udeb
diff --git a/debian/ssh-argv0 b/debian/ssh-argv0
new file mode 100644
index 000000000..67599aec2
--- /dev/null
+++ b/debian/ssh-argv0
@@ -0,0 +1,30 @@
+#! /bin/sh -e
+
+# Copyright (c) 2001 Jonathan Amery.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+if [ "${0##*/}" = "ssh-argv0" ]
+then
+  echo 'ssh-argv0: This script should not be run like this, see ssh-argv0(1) for details' 1>&2
+  exit 1
+fi
+exec ssh "${0##*/}" "$@"
diff --git a/debian/ssh-argv0.1 b/debian/ssh-argv0.1
new file mode 100644
index 000000000..a36a63d40
--- /dev/null
+++ b/debian/ssh-argv0.1
@@ -0,0 +1,64 @@
+.Dd September 7, 2001 
+.Dt SSH-ARGV0 1
+.Os Debian Project
+.Sh NAME
+.Nm ssh-argv0
+.Nd replaces the old ssh command-name as hostname handling
+.Sh SYNOPSIS
+.Ar hostname | user@hostname
+.Op Fl l Ar login_name
+.Op Ar command
+.Pp
+.Ar hostname | user@hostname
+.Op Fl afgknqstvxACNTX1246
+.Op Fl b Ar bind_address
+.Op Fl c Ar cipher_spec
+.Op Fl e Ar escape_char
+.Op Fl i Ar identity_file
+.Op Fl l Ar login_name
+.Op Fl m Ar mac_spec
+.Op Fl o Ar option
+.Op Fl p Ar port
+.Op Fl F Ar configfile
+.Oo Fl L Xo
+.Sm off
+.Ar port :
+.Ar host :
+.Ar hostport
+.Sm on
+.Xc
+.Oc
+.Oo Fl R Xo
+.Sm off
+.Ar port :
+.Ar host :
+.Ar hostport
+.Sm on
+.Xc
+.Oc
+.Op Fl D Ar port
+.Op Ar command
+.Sh DESCRIPTION
+.Nm
+replaces the old ssh command-name as hostname handling.
+If you link to this script with a hostname then executing the link is
+equivalent to having executed ssh with that hostname as an argument.
+All other arguments are passed to ssh and will be processed normally.
+.Sh OPTIONS
+See
+.Xr ssh 1 .
+.Sh FILES
+See
+.Xr ssh 1 .
+.Sh AUTHORS
+OpenSSH is a derivative of the original and free
+ssh 1.2.12 release by Tatu Ylonen.
+Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos,
+Theo de Raadt and Dug Song
+removed many bugs, re-added newer features and
+created OpenSSH.
+Markus Friedl contributed the support for SSH
+protocol versions 1.5 and 2.0.
+Jonathan Amery wrote this ssh-argv0 script and the associated documentation.
+.Sh SEE ALSO
+.Xr ssh 1
diff --git a/debian/ssh-askpass-gnome.copyright b/debian/ssh-askpass-gnome.copyright
new file mode 100644
index 000000000..4a71dda00
--- /dev/null
+++ b/debian/ssh-askpass-gnome.copyright
@@ -0,0 +1,44 @@
+This package contains a Gnome based implementation of ssh-askpass
+written by Damien Miller.
+
+It is split out from the main package to isolate the dependency on the
+Gnome and X11 libraries.
+
+It was packaged for Debian by Philip Hands <phil@hands.com>.
+
+Copyright:
+
+/*
+**
+** GNOME ssh passphrase requestor
+**
+** Damien Miller <djm@ibs.com.au>
+** 
+** Copyright 1999 Internet Business Solutions
+**
+** Permission is hereby granted, free of charge, to any person
+** obtaining a copy of this software and associated documentation
+** files (the "Software"), to deal in the Software without
+** restriction, including without limitation the rights to use, copy,
+** modify, merge, publish, distribute, sublicense, and/or sell copies
+** of the Software, and to permit persons to whom the Software is
+** furnished to do so, subject to the following conditions:
+**
+** The above copyright notice and this permission notice shall be
+** included in all copies or substantial portions of the Software.
+**
+** THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
+** KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
+** WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+** AND NONINFRINGEMENT.  IN NO EVENT SHALL DAMIEN MILLER OR INTERNET
+** BUSINESS SOLUTIONS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+** LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+** ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
+** OR OTHER DEALINGS IN THE SOFTWARE.
+**
+** Except as contained in this notice, the name of Internet Business
+** Solutions shall not be used in advertising or otherwise to promote
+** the sale, use or other dealings in this Software without prior
+** written authorization from Internet Business Solutions.
+**
+*/
diff --git a/debian/ssh-askpass-gnome.desktop b/debian/ssh-askpass-gnome.desktop
new file mode 100644
index 000000000..ecbb920d7
--- /dev/null
+++ b/debian/ssh-askpass-gnome.desktop
@@ -0,0 +1,12 @@
+[Desktop Entry]
+Version=1.0
+Encoding=UTF-8
+Name=SSH AskPass
+GenericName=ssh-add
+Comment=Enter passphrase to authenticate to the ssh agent
+Exec=/usr/bin/ssh-add
+TryExec=ssh-add
+Terminal=false
+Type=Application
+Icon=ssh-askpass-gnome.png
+Categories=Application;Network;
diff --git a/debian/ssh-askpass-gnome.dirs b/debian/ssh-askpass-gnome.dirs
new file mode 100644
index 000000000..8fdeef7ea
--- /dev/null
+++ b/debian/ssh-askpass-gnome.dirs
@@ -0,0 +1,4 @@
+usr/lib/openssh
+usr/share/man/man1
+usr/share/applications
+usr/share/pixmaps
diff --git a/debian/ssh-askpass-gnome.png.uue b/debian/ssh-askpass-gnome.png.uue
new file mode 100644
index 000000000..2c6895530
--- /dev/null
+++ b/debian/ssh-askpass-gnome.png.uue
@@ -0,0 +1,158 @@
+begin 644 ssh-askpass-gnome.png
+MB5!.1PT*&@H````-24A$4@```(0```!S"`,```!N#5HT```#`%!,5$7_____
+M__\("`@0$!`8&!@A(2$Y.3E"0D)*2DI24E):6EIC8V-K:VMS<W-[>WN$A(2,
+MC(R4E)2<G)REI:6MK:VUM;6]O;W6UM;GY^?O[^]:4E(0"`!*0CE*.2%C6DI[
+M:TK_WI0Q*1@I(1!2.0#6O7N$<TK.M7/_WHSWWI3>QH3OUHSGSH2,>TI".2&M
+MC#%*.0A",0!:0@!:4CE22C&<C%JMG&/WWHQ*0BG>QGNEE%HQ*1",<R%*.0!K
+M4@",:P"UI6O&M7/_YY1C6CE".1C.K3G6M3ES6@"4<P#&G`"4C&N]K6O.O7.U
+MI6-:4C%22BDY,1`I(0!20@![8P"$:P"EA`"MC`"UE`#.I0#6K0#>M0#GO0#W
+MQ@#_S@#_[YQ[<TKWYY3>SH36QGMS:T+GUH1K8SE:4BES8QAK6@@Q*0!:2@!C
+M4@!K6@",<P"4>P"]G`#&I0#OQ@#WS@#_U@",A%)*0A!S8P@Y,0!S8P#GQ@#O
+MS@#_YTI:4AA22A#_W@#.QH3W[YS6SH3_YP"4E(P8&!#__Z4I*1@A(1`0$``8
+M&``A(0`I*0!SA!!SA`![C"%[C#%SC!![E#E[E$I[G%(Q.2F$G&N$I7.$I7M*
+M4DHI,2F$K92,K9R$K9R,M:6$C(SO__]C:VM26EI:8V-"2DJ$E)0Q0D(0&!@`
+M"`B<SM:,M;V,O<9*:W.$M<8Y4EHQ2E)CC)Q:A)2MY_]SG*V<UN]KE*64SN>,
+MQM[6Y^^]SM:4I:TY2E)KC)QCA)2EWO>4QMXQ0DI"8W/&UMZ<SN>,O=9:>XQ2
+M<X0A,3G.WN=*6F-[I;V<UO<I.4*,M<Y2:WN<SN]*8W-SG+5KE*UCC*5*<XRE
+MUO=CA)R,O=Y"6FLY4F-KC*52<XQ*:X1:A*4Q4FN4O=Z4QN]*<Y2<I:W>[_\Y
+M0DH8(2D8*3FMM;VEK;6,E)QK<WO.WN\A*3%"4F,I.4HA,4(A.5(($!@0*4*U
+MO<:4G*4Q.4+>Y_<0(4((&#D`"!@($"$0&#&,C)1S<WL0$!@("!````@````T
+M<3]9`````7123E,`0.;89@````%B2T=$`(@%'4@````)<$A9<P``"Q(```L2
+M`=+=?OP````'=$E-10?4`A,0`RQXQ,/8```7GDE$051XG-U;;6P<QWD^T_)'
+MTM1!6Q2UN_F@[<;Q1UVO$L>MW3W6K)&[BUO#N[??L\,6"-)D;^]V;V9<+^TF
+M6X"5K-OU7_^H_K1VV]`_#"F&8""`)(`N(,D1!(%R#$.R4P-M0K=%:3E.X"22
+M4/&F[\SN'6F)LDA:18H.0-[R;F_WF7?>]WF?]YUEK?;_;;SSRP8@!G]C<^?_
+MVL>O_\25!W%\4Z=__.IMSRUON\(8#O'%39T_<>UW_^LWEW]EJW=;^\>)\=%Q
+M_OZF+C/\NQ]^]Y7KG]DBB.4C:_[@RZ.CO>JQ35UFXM]^]K-7]E^]11`O\H-K
+M0$R,CMZ=?;<Z.G%T(Y?A'_OG5WYZ[9:=@J^L'D_D\&N/6*&A/83?BWMJM??Y
+M1JZRQ`=[=F_HS'7'L4%)">+6R^T?`PCX^\`0"1![($3F^5JW.?G2)2ZSN,RW
+MA.&P],,#Q5_*UZ5]M=J/&N?!)Y<%,ER\6=MWS8NUUZ_.U_(6OQ2(+8Z#?+Z\
+M;BR7_]C)6NU[L_>\#%YR\O!P*I@]5UL$(YP,]9/BY/([^R<N=;4MCA//\!?$
+MZVXS@D6HG0377NQ8OZ@=YL-AB@)O<.X,D,5/&GP_?%K%T/.;BYD-C+VW/BI>
+M3H:H^/G!V@)__Z5CMWK#I3,\G/*"@+8:X>#,VT-G(``LR6^\JQS\L`MN9;SV
+MN'887@XIR.VLG!UR?J8P2*[V^QZE`0DH\=PDXGX.2W!P`CRF]G*:7FD,M1.[
+MK1!>#BH^)I[5;-JNJ;&NRG!0#4I9+R0Y/[>X<A[RV?&A?<V'7.[HX2TY[<^;
+M[6_7:MMR`O<+"`GPK)'9H4?%[4L8F1'A@5'G?`)<=-BTG[OTQ5[BG+^WP1N/
+M^.\8V'>O[BG'CW"3C:8>33%/LUA`W1:L1T"P']IS2H-Z!A].\#:.@;QJAQ;6
+MO?">9__^I\\<6?>C"\>^^2KJCP/%OG'&C3GO`08B;AG0-,%!PP@H-KO2%#AN
+MH$R9I0%#/</&+/J>R*^'UKWRGO_\X0__8V)CCKO(3Y8'RS"A<Q$N;,!`$T?>
+MM,`![G<2S`Q-@B(-!S-U5K@'9I@DV[\-3'&P=GA=$-?]])5_FECWHXO'.Q6*
+MDWSOX6T%<G("$S5#GT)0ML$G<;N'LS"7H&RP3*:UY3$)F*7S%?CVWJOWK7?A
+MT_-'SN_9&`;P!BY7Y`3GBC5HL8:!`^9PN!..D?!)#SPSYPB._#X&@%H$`(C`
+MPXBI#P\<DNSU4<<\W_TB9(YAV)I3XP!K,<->F/>IC`F($8J=0G$$58!A"-.>
+MQ@%U4@?^H)G?N69;_OH5`'%8,?5SI]_37,9Z;4+]R,%D.Z^348S`ZAB:6!D1
+M(0&;[=``I6$9M!@IG=T?Y>9\VUOEP3G+:W2:/GAA`K?&R/*SV8(G5(8(_,K2
+M;EMGI$1!?2^@==[-Q)^8I`WS%Q#H^U_8*@@S*N72BP.,"8.I84\3MZ&(346Z
+M-C(%I?E4GQ,:E&]@2BV>`WN`:Z*TYX<[3N_=MF7]<B1U>T?^1<)Q2X>G7DCD
+MG;"M-15+SAQ,X_(^'L3"!RKCY+GN@=V8I<:TE;=T7@H8OA4=LQ`B]]%30DG`
+M)2F&'^*7D\>^YG8&(Y?H:0B;83;B,*8J5@'G]XV>%Y">-F<I7"(8=+9BD+VA
+M3[HKQYZ/(!+\6:OR/;GP1I\,5&%R"@G#@3=UGQ(S9L)->;\)D(B/Q!(930;O
+MP%!ZR6`+&&HGSJ4^LW-%\$'0YA:M(@"2A)%@3XDQ]6SJ6_)SR"`IK`FS>1Q$
+MMV:5F5#J@@6M-(H)FMA"X;?G2.W$V=3#I*VT/4)=G<>DQ"`LT0+_]('`X2:T
+MC!)L*3;#KN%BU.FRRF:^,B=9'&.:7[\50^SGBR\,4X\RTL@;"8;DU?:K\/=Z
+M,H,'%.;-2O-07\W[,&L((PE"#H)2>40)[FU*;R[S/179+XJU-("16>:Z`8XX
+M5UL$BUCTW<HH;24JB1-<,$^;Y;T)@"#5RC4D1NHFQ<<V`^+5)3YQ\E5Q=/2\
+M0-$@,OHA)-(HS+NV0_W8967,NF%DM*2T(K%B]3J!9`M4CQBM5BD1H0O?+_@G
+M-P,"8I,7W]KS@]??W+/"%87SN%P#DMFJUU/5;N:"N"QOT<L];19+0YCQ7)Q6
+MA-*R&'+*<,9`F\*6,;_N8]?MOFX3*/:&5G-[6N0=R[)ZFN)5;)B%X'F(8G\[
+MG\+"%F3*@#LG$A"#O&;YY=*P#$>:+[]%6?5NSOGNS87'6R$089(0QEA&TJB*
+M3:!`00P!B5*MW1>P?`A`QZT(&SBRM!EEJ*'$<I5PT`ME<F-UONE.P.F0B+"2
+M[N#'H[S`<D_<(XC:7K?HP^PI%KF<CEFLHK)&P5-?)';LJ0HWQ%G4Y9L/T6/&
+M*,J"2DHS1EEJ4YFN(X82<`EK)/=+C%1F%MH'.W7J(BI8HOSQ7S_\U';A033?
+M7"?@^,(+^]Z8:-'QQ44@!%T#LB>2R]]6"87[HX$S(J5RM0SI/<1#7D.D4=;B
+MC]T^/?/@-E/HP&CBADVA.+'`)[B(<*"Z$13LZH57L@.VFE@FU4+-@BIY`M)F
+M8?1+TV!'!6>$]'KO[=.3D],/[A`&M/G5F^3M$]<(;4]]34U(97#6XXI-1JLO
+MWC5[,=``]5QIBEA%,LD)K["-+*!(^=KT].<GIR=G'M/!1/[P$7[M)E&(_`T6
+M'O!!MT\(+`<-5,Z[R:JLHZHO[,2B@0]W1B#]31M7R45\M[/KOLG)/Y_\_/3T
+MS.XVV%"Y_X_XQ,:\\V!9D!Q7,BD9/0U(,S<L+VFQ?FXWE#0;V8)*WV5.74V"
+MLA1$:.Q'A,)-)83;)\$4.>`,[]UY[\9TS7'.;Q$]F2,&*\4T[BKA=GV@#-ID
+M+M)8YH^#(9!I@<6)[X[-(^5?J7BGBCNF)Z?EF+EMV"1!>._,?8]L",1+\[>V
+MM0<67AZV"5"5"*W,Y':&?*!(["M^@-<&I80R<MY1G"9]$<>9\6>3,]-WWG''
+M']QQQYTSNT()8F:#IJB]&\:)J>E:IV.:T@-`&3E,,E(&]449(./;TG%GH'P/
+M2@(=DBFA5+_WP?N_^A</W`+CTX_MX#X)[Y^9N6W7QHK@VLOO:1YS+;,>1;:\
+M(>OFK/0WR\6ER*.LI&CJ.X15@*@`RLPH$GF5HN+F;?S\?\OQ[/N@[L`2.V<F
+M'SJU,1"0S'.3R5')2E0XY82SS$MD[==NS"+9#4@,(R82#VHWP"]Q$I1R#T4%
+MY]MNNDJ.F]Y7G4"_^:N_>]<C9S<(`E('CRJV)M+M(>ZE@G/4^JPPRI-APZ[$
+M?R=NE7;HZTW!IY@BZ9F$V,KR",15-^@DT/GYO_E"?@F?V'?HT*'Q=D79%C[X
+M/%>K=9?$C$#$@7"C*.P@Z8QVY)<N@;SJ/%@8NNJM\($5\U\=8;CJ-X:$*/S:
+MJSXQ7'<[8/_*,'\@'YZMRM8#2Q-']B\(295B&1L@7V%ZF#&_Z0%!%Z5,"/KC
+MG#F.3C(.&F$U9#7TX?7_7H'XY!`1_1]NO.J3ZQIB@O<\@A"RBA]7[QQ<EJ)N
+M5NEDP%4JCT#&V+-JJDB%Y7ATG%WQ"`A9&[)D#(JXCP_._[H$<;U8CD\`&#YQ
+M85EZ<`6T:Q5C.-XQ:F:\-,\C$GB%!:)L`&[G0O74J*J+\4Q!(6AL=>K!*IX/
+M@#*5:V\$QSQK!>2>YZZZ\3-AOKI!(<?Q:Q:/+_$>0428DK7T$<@#9V+XOF_Y
+MZ4"-H;KPIXK<&EU^='UJ"_&$^U+]@[A_<H00C6TEYN:EU]YTTW,A`F6^=-,-
+MFF@KK-0N'(O#CMES^A!FF!15&_B%H1M('F(T4>'[%+-6WJ!T#*-B=!DPL=08
+M?B[R)H0M-0NV=HTP4I]]E@M%UAJ^'P+/L)YR<7]SD?N99%X(`KV,XB/<HY(-
+M`1DK79!YW4KOBA]$QK.MODJ`H7"O34!$M/&:-2*BN<1MH4?,G'==L&L6\[T7
+MH5@H;,_W?4^$8OH\1,GA%8F<(D=8%E<=@*J4DA_T2ME%1UPBDS<$\&R0:8-@
+M5+..<&C;X4Q/_]3G'OO,W=^`C,O4X<41\BYO>_U^7X;]K<^?.C74P!(4>YVP
+MDO`CER1RUI0V(U0B0FL^)=C.(<<H;;S6.X6S=4-0O>$7=NZ<V3GSE8>@BG77
+MVSQ<4DG5HL;$#-/VDX7'@C@MRN(*'+/DP("Y/3EO,W5`+U"WX^+2#C)<6*]P
+ML<_[:^-4KF0O];+9':!P(*OO_`SH&YPO70RB]EY];#WL(9PUG)[*E9AELG_O
+M12489J>)7&]D)7+M'&$%UG2J)%Y/$3C`JO(M^S8"!&KQ/P($=SVX<^?#WP+?
+MBBX.$.&<4%M5:D3$G6\6J:H6H2S#LZ@B!!;GAM3\E,D\&:I]P)3I[3)BB*$1
+M%NL?8$XQLD;DY%\%?777%W???=N=#X&_===Q"E'L.&ZR^G7JN^"ICB'4+DRN
+MDHZ4N#9X)*V$)/$<47O2_BB-:`:`&*S&1?F;TD[!OW;G],R?[BKL>Q[YRJ-@
+M"7/XG75`[#NK.8Y#5_&+7BE%+H+0&J35U4IU3UI)Y7I5<(QT)6OK/FYQ%'P0
+M!O72W[]M<N>??/KCW$')-U9$-6`-UVV[GQSTG`2-OSVF:%!(.BH#TR]#PE-M
+MO.8VX\@!XL\31J"(_P!-@,+(AW=_\9;?_JT;5$9<C5M@2H>OOP&Q9*"Q1T&"
+MAADC&85ABBHGU[J5M*N<1Y[I)8A6KDA]O0V5>TK70H"W&\///3:X_L:;%`=C
+M1TE]DLPJG*^[1_?ZT!E/@%D-(.(."`@_#)$/BJUK85OKXU6?HTBJ&FQ)RL!&
+M#S(QZH`Y&SS&JRE&5,(Z!W%Y_^`9G4#YT#9RR-$6B=9'\;;Z1#`B.P)E0AN<
+M,BG@6UP9Y)KI:_%HRT?&72<N^4'F$=P><%!S2E&H^8`G=(US!3W.OW;[Y,R=
+MO*/U?+7#>D9@Z0$Q^'JMYN\,03Z6N9!2C?@JQF[!\T+K]7&6T4[JM-S5'$T*
+MV[;&7$DS['F^AUB6L?ZM8/=@W.ASP[IV]UU0"^Z`1)Q8AC\7/XTU"V)N>1T0
+MM;=3UW/+]@H*O:B/L:VV$Y9),K4&>@':3E9>6#17HU2+1U'2;[9$]8'+OD@V
+MR_V17U#2T>;BIWYG>OIV'F=!7[6@G,G=GL5<?66]1V`.\&Z_FMN<EFH4JITL
+MJXB;M&R?H%:YSBTX#8/R9M5L62_/FP$>6PGEG9'<H5;A9];@X9G)VSC!"&C/
+M;GF:#<H!;5^7*VKGM3E7IBSJIWJ[TQ/+'7N5WD66CW%5WK3'&X(E5Q"WH40$
+MCU.6F2-:+481,]Q7[I^9?I##.ZVNV;)\T7Z'DF"X[F[,.]ST9'#8(6_[<:?'
+MV*@A!V$`@J342F[:8JO=*6EYB+VG(0F.2,/+I[+2:'H=[(GTS]XW>2=DA@`W
+M>:0:'4%[?KCN<M2.<A6F^&20W7KZG8)AY#*O,,L$2HFJD:KV:W3FO*Y;6JQG
+M6M()*4#3$):<#F_40]ESI6I=IKC.KKNF9YXJO`R3GE9TA%C!-E\OD\*8US,A
+MFDCX_=H0TCAD.U`"I888]X]I*_1G\X9D-MKB)E2=H`(!1J*8CH,"!R>,M@:B
+MN4L]1RHP%@^_-#E]&R]Z),.^*XHCA@I^B0?$]G,?M6`UGJG53H5BUR^WF>A3
+MP91SM9)Q)-7U=)2\^P"2(&Q)<NTIL^V>9;@=!UD]44./"9B&.^Z<GGR8\[QC
+MH4S4E[9^*4/4#O(H@7NI0O?`S'W-Q*8AI`.)"L1\7URTR0LG&#6JY/*$#M1'
+M(B@,7;?"ONKFJ.Y%W!C7"-C)^;:'04Y\]NX!YX6JJ4#;\Y?``$X!E29K<M'9
+M7BA@:FINRB1I<:>E*J))&Q2:7.;8'\EI-E6E..JK/-4=/6D8G0XSN8:J:,GJ
+M/$KYW5^Z;_)+MVP7G1_.)S[DX3`.^<)63HO#?;RN<,42P4@3(.0\)M+`IF0.
+M9CBF5^V,H8%5S1A0*#R''P7.+X3O^APXS(]<QARQ%3:PYV;YX=JZ6\;CL:21
+M'E^1Y^P56T8EAC[/M61$6Z5[9IK21H$LF@"0U*"R<FF&A6Z8">U/Q8'8-.MS
+MBV%;"!7"?-O"U+SLAO%1KJ=\:5]Y"*,M=Y%8J#J5#J9618HL]L`NKNF+O([+
+M$L6'J4/RR`3/0P$-Z@QAHJ4,.Z(FJ4,%Q=S.\/1E,.R#4OA<%3CS?/GTKEAT
+MZ@AVF-<J=0Q3O$H]2%0)I&V0.L`.KD5H5QOM?%7TIG5LJ,Q<AL1>0XJQ9^9G
+M+O>@X(F]RWM&SQ+L7X%$>QCH1UXN,*TR3S"AJA@;JY\>!*34F8Y:1^W9T4Y4
+MJ<2($^F=?A/RB$AN;2?6^?R)#T4@EV!\M+@LNIE'Y]ME'Y%T1B5=#NHHCD<E
+M%NT7FBH;,QBEVFRY^P1RJ.IA,-9*BZ[FL[Z#F:_S]U8N&9?KC1<DXJ-GN27;
+M@T3/RJ28<8=V#3L896I?%SUVZ2UN(1[PD/FL9XTR*D;;>6%F;K-C9\;PI3<6
+MEB]OB@O&J[J62TGGB,)#;&P@C@P-,>DI,@NEJXK2$?6!;.EV&VQ$9`%JB*V/
+M)SNY6A<%S^*1#P_/B\?QZ`FC@+3+5.$263_!MF+H3V"YX#*#$3MFHQT9XKB8
+M=45Y$'<JPU$'4]+F4Y"-^=)3,EELVA*[FW/]//>AVH<)LCA,Q(9SV;ZF01X+
+M12J5>-G1Q;)B''1P8.M9E31,09IFC+,F!^;9E$=4X_L%:>E+"[RO%>#@5N'@
+M3!550TD43076I"U:BTPT?JDOB0VCL(.]`:MJC[XIO0-[ROK/&%U^[-_N++TA
+MVC:\C:F5BW[JP)1[3M+UE23P):7B1'&#P)9]"8+]P2R2TDF:0I?((#*V^F!-
+M;OY(OAX`W6IQD'24@+Y&U18T,]K4?%JVFS-P3U(7:T"D6ND9-B-2$P<1N`X(
+MHD>_/-BL0Y9CD8^>0"J8S77)6T(;JG)?FN(X)7HI=,!I$A+5LXI+((N;6=*P
+MA?=8!JQ,G?_>7WW]_)9`3(Q*I+>FW)RG3Y8,14A7[CQ[@<L=7E4YF18&4:]T
+M!$+P@'<RAF;;8`6_`&OP]XH__+*ZP?;^!\8[8^CSKO[6.RN:6TFK>LP(:[71
+M$UR/L%L&AL==U99-/>J;@<6!/7#65A-,&HWV\)V#>\_=_/5+R;D/!?%J=?#B
+M/9T?@.@ZEUM4N"12>Z"!C3YE.>_[#2E`$=,[H=<7U3IMZ9B$N?#,.2V'&H?/
+M?U]<Y?53RUM!,1H+>IGYWE8B#W(G4KJ,M=NP]F&.D>DP4$[;?7.0^WY'B'I7
+MHT&BB$?TL,,ARVJC=O714Q_AV;.5JK5SB',]=C.+-S)/@WC%YA0+K(X(&N[Y
+M//=9K'J4Q758H+8D;@:*,G97!>WQS?W7P=JQ4'WUS6\U"Z6H#WACKBT>E(#B
+M`"8K>K1)@7`.*T`[4Q14A/A(1.:<RZ\^J9B/O[7E6U\\7FL0I$S,<SY+(IDZ
+MJ<R=4QDS5108"E0HKIJP?BJ?N(+<'8D8/YC7GWGU\A??,(AO!&WE1.WXCC@I
+M'%8*#>KI&LHZ71+88I,TTTS:4@4XYAK*M@/B:XOA]HN;R%L>;YE)+N;TM\V&
+MJ&(2H2ZIEPZ2N:))RBT7%NN>T-<@M%;[00OI/2]>.1!3LBBJ/14_\&+MA16N
+M1%!XN2$42;D;5&3I@+CF<0<T?T,=.>313RG+&_I7AXV,?]3+[?9=4S\1+]N$
+M'$\UA7<]W07MCPA"Q%(,G`]7GE?B.7/<M#UZ?-,BXI)CN6IJ\(XTR`+4-YR?
+MG9]08]V(F@W#2`L^G%>0!A^??@@Y6WK([3+CQ-65?U55Y`_"S..0#UX.9V\^
+M=>H,+_2<GSY1.^O4!3&^]I`;7HDG4B\8AR:J)\Z7RSW>-VX)K"%H\E>?TIZ#
+MWQ"A20$$_58GEA[YK]_<?B6>S;U@'+B0[E:H(?:)CAZ1_S9PC94E\I^/)EJE
+MI=Y\8->5!W'1.$,462J=EO])<BC,FM)$9ZUJZ_/X)O\W;$OC)W'Y+/[^\M]9
+M<N_QU\3K2:VH3CBYWJ;&%1X+ZLOEO:Z1++"__DV9LVO;E-$9&WXV_".`J,Q^
+MH(S<`^,GRJX<*UQ^G+Y@=_/\NFWB_^5Q[(+',?;_,D!<.%[_OP"BMI6(_!_$
+3<O>]/$B.A0````!)14Y$KD)@@@``
+`
+end
diff --git a/debian/ssh-askpass-gnome.postinst b/debian/ssh-askpass-gnome.postinst
new file mode 100644
index 000000000..b6c56d4e7
--- /dev/null
+++ b/debian/ssh-askpass-gnome.postinst
@@ -0,0 +1,65 @@
+#! /bin/sh
+# postinst script for ssh-askpass-gnome
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see /usr/share/doc/packaging-manual/
+#
+# quoting from the policy:
+#     Any necessary prompting should almost always be confined to the
+#     post-installation script, and should be protected with a conditional
+#     so that unnecessary prompting doesn't happen if a package's
+#     installation fails and the `postinst' is called with `abort-upgrade',
+#     `abort-remove' or `abort-deconfigure'.
+
+case "$1" in
+    configure)
+        if dpkg --compare-versions "$2" lt-nl 1:4.1p1-1; then
+            # libexecdir changed, so remove the obsolete alternative.
+            update-alternatives --quiet --remove ssh-askpass \
+                /usr/lib/ssh/gnome-ssh-askpass
+        fi
+        if dpkg --compare-versions "$2" lt-nl 1:4.1p1-7 && \
+                [ -h /etc/alternatives/ssh-askpass ] && \
+                [ "$(readlink /etc/alternatives/ssh-askpass)" = /usr/lib/ssh/gnome-ssh-askpass ]; then
+            # Work around the ssh-askpass alternative somehow ending up in
+            # manual mode.
+            update-alternatives --auto ssh-askpass
+        fi
+        update-alternatives --quiet \
+            --install /usr/bin/ssh-askpass ssh-askpass \
+                      /usr/lib/openssh/gnome-ssh-askpass 30 \
+            --slave /usr/share/man/man1/ssh-askpass.1.gz \
+                    ssh-askpass.1.gz /usr/share/man/man1/gnome-ssh-askpass.1.gz
+
+
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 0
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
diff --git a/debian/ssh-askpass-gnome.prerm b/debian/ssh-askpass-gnome.prerm
new file mode 100644
index 000000000..e85f2d4a7
--- /dev/null
+++ b/debian/ssh-askpass-gnome.prerm
@@ -0,0 +1,41 @@
+#! /bin/sh
+# prerm script for ssh-askpass-gnome
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <prerm> `remove'
+#        * <old-prerm> `upgrade' <new-version>
+#        * <new-prerm> `failed-upgrade' <old-version>
+#        * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
+#        * <deconfigured's-prerm> `deconfigure' `in-favour'
+#          <package-being-installed> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see /usr/share/doc/packaging-manual/
+
+case "$1" in
+    remove|deconfigure)
+        update-alternatives --quiet --remove ssh-askpass /usr/lib/openssh/gnome-ssh-askpass
+#       install-info --quiet --remove /usr/info/ssh-askpass.info.gz
+        ;;
+    upgrade)
+#       install-info --quiet --remove /usr/info/ssh-askpass.info.gz
+        ;;
+    failed-upgrade)
+        ;;
+    *)
+        echo "prerm called with unknown argument \`$1'" >&2
+        exit 0
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
diff --git a/debian/ssh.links b/debian/ssh.links
new file mode 100644
index 000000000..bc454b326
--- /dev/null
+++ b/debian/ssh.links
@@ -0,0 +1 @@
+usr/share/doc/openssh-client usr/share/doc/ssh
diff --git a/debian/ssh.postinst b/debian/ssh.postinst
new file mode 100644
index 000000000..cb1278033
--- /dev/null
+++ b/debian/ssh.postinst
@@ -0,0 +1,18 @@
+#!/bin/sh -e
+
+action="$1"
+oldversion="$2"
+
+if [ "$action" != configure ]; then
+        exit 0
+fi
+
+if [ ! -L /usr/share/doc/ssh ] && \
+   dpkg --compare-versions "$oldversion" lt-nl 1:4.1p1-5; then
+        rm -rf /usr/share/doc/ssh
+        ln -s openssh-client /usr/share/doc/ssh
+fi
+
+#DEBHELPER#
+
+exit 0
diff --git a/debian/ssh.prerm b/debian/ssh.prerm
new file mode 100644
index 000000000..400c92bed
--- /dev/null
+++ b/debian/ssh.prerm
@@ -0,0 +1,14 @@
+#!/bin/sh -e
+
+case $1 in
+        upgrade)
+                if [ -L /usr/share/doc/ssh ] && \
+                   dpkg --compare-versions "$2" lt-nl 1:4.1p1-5; then
+                        rm -f /usr/share/doc/ssh
+                fi
+                ;;
+esac
+
+#DEBHELPER#
+
+exit 0
diff --git a/debian/watch b/debian/watch
new file mode 100644
index 000000000..6ffdc3708
--- /dev/null
+++ b/debian/watch
@@ -0,0 +1,3 @@
+version=2
+ftp://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-(.*)\.tar\.gz \
+  debian uupdate