1 files changed, 163 insertions, 0 deletions
diff --git a/scp.0 b/scp.0
new file mode 100644
index 000000000..03157e8b7
--- /dev/null
+++ b/scp.0
@@ -0,0 +1,163 @@
+SCP(1)                      General Commands Manual                     SCP(1)
+NAME
+     scp M-bM-^@M-^S secure copy (remote file copy program)
+SYNOPSIS
+     scp [-346BCpqrv] [-c cipher] [-F ssh_config] [-i identity_file]
+         [-l limit] [-o ssh_option] [-P port] [-S program] source ... target
+DESCRIPTION
+     scp copies files between hosts on a network.  It uses ssh(1) for data
+     transfer, and uses the same authentication and provides the same security
+     as ssh(1).  scp will ask for passwords or passphrases if they are needed
+     for authentication.
+     The source and target may be specified as a local pathname, a remote host
+     with optional path in the form [user@]host:[path], or a URI in the form
+     scp://[user@]host[:port][/path].  Local file names can be made explicit
+     using absolute or relative pathnames to avoid scp treating file names
+     containing M-bM-^@M-^X:M-bM-^@M-^Y as host specifiers.
+     When copying between two remote hosts, if the URI format is used, a port
+     may only be specified on the target if the -3 option is used.
+     The options are as follows:
+     -3      Copies between two remote hosts are transferred through the local
+             host.  Without this option the data is copied directly between
+             the two remote hosts.  Note that this option disables the
+             progress meter.
+     -4      Forces scp to use IPv4 addresses only.
+     -6      Forces scp to use IPv6 addresses only.
+     -B      Selects batch mode (prevents asking for passwords or
+             passphrases).
+     -C      Compression enable.  Passes the -C flag to ssh(1) to enable
+             compression.
+     -c cipher
+             Selects the cipher to use for encrypting the data transfer.  This
+             option is directly passed to ssh(1).
+     -F ssh_config
+             Specifies an alternative per-user configuration file for ssh.
+             This option is directly passed to ssh(1).
+     -i identity_file
+             Selects the file from which the identity (private key) for public
+             key authentication is read.  This option is directly passed to
+             ssh(1).
+     -l limit
+             Limits the used bandwidth, specified in Kbit/s.
+     -o ssh_option
+             Can be used to pass options to ssh in the format used in
+             ssh_config(5).  This is useful for specifying options for which
+             there is no separate scp command-line flag.  For full details of
+             the options listed below, and their possible values, see
+             ssh_config(5).
+                   AddressFamily
+                   BatchMode
+                   BindAddress
+                   BindInterface
+                   CanonicalDomains
+                   CanonicalizeFallbackLocal
+                   CanonicalizeHostname
+                   CanonicalizeMaxDots
+                   CanonicalizePermittedCNAMEs
+                   CASignatureAlgorithms
+                   CertificateFile
+                   ChallengeResponseAuthentication
+                   CheckHostIP
+                   Ciphers
+                   Compression
+                   ConnectionAttempts
+                   ConnectTimeout
+                   ControlMaster
+                   ControlPath
+                   ControlPersist
+                   GlobalKnownHostsFile
+                   GSSAPIAuthentication
+                   GSSAPIDelegateCredentials
+                   HashKnownHosts
+                   Host
+                   HostbasedAuthentication
+                   HostbasedKeyTypes
+                   HostKeyAlgorithms
+                   HostKeyAlias
+                   HostName
+                   IdentitiesOnly
+                   IdentityAgent
+                   IdentityFile
+                   IPQoS
+                   KbdInteractiveAuthentication
+                   KbdInteractiveDevices
+                   KexAlgorithms
+                   LogLevel
+                   MACs
+                   NoHostAuthenticationForLocalhost
+                   NumberOfPasswordPrompts
+                   PasswordAuthentication
+                   PKCS11Provider
+                   Port
+                   PreferredAuthentications
+                   ProxyCommand
+                   ProxyJump
+                   PubkeyAcceptedKeyTypes
+                   PubkeyAuthentication
+                   RekeyLimit
+                   SendEnv
+                   ServerAliveInterval
+                   ServerAliveCountMax
+                   SetEnv
+                   StrictHostKeyChecking
+                   TCPKeepAlive
+                   UpdateHostKeys
+                   User
+                   UserKnownHostsFile
+                   VerifyHostKeyDNS
+     -P port
+             Specifies the port to connect to on the remote host.  Note that
+             this option is written with a capital M-bM-^@M-^XPM-bM-^@M-^Y, because -p is already
+             reserved for preserving the times and modes of the file.
+     -p      Preserves modification times, access times, and modes from the
+             original file.
+     -q      Quiet mode: disables the progress meter as well as warning and
+             diagnostic messages from ssh(1).
+     -r      Recursively copy entire directories.  Note that scp follows
+             symbolic links encountered in the tree traversal.
+     -S program
+             Name of program to use for the encrypted connection.  The program
+             must understand ssh(1) options.
+     -v      Verbose mode.  Causes scp and ssh(1) to print debugging messages
+             about their progress.  This is helpful in debugging connection,
+             authentication, and configuration problems.
+EXIT STATUS
+     The scp utility exitsM-BM- 0 on success, andM-BM- >0 if an error occurs.
+SEE ALSO
+     sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), ssh_config(5),
+     sshd(8)
+HISTORY
+     scp is based on the rcp program in BSD source code from the Regents of
+     the University of California.
+AUTHORS
+     Timo Rinne <tri@iki.fi>
+     Tatu Ylonen <ylo@cs.hut.fi>
+OpenBSD 6.4                   September 20, 2018                   OpenBSD 6.4

diff --git a/scp.0 b/scp.0 new file mode 100644 index 000000000..03157e8b7 --- /dev/null +++ b/scp.0
@@ -0,0 +1,163 @@
	1	SCP(1) General Commands Manual SCP(1)
	2
	3	NAME
	4	scp M-bM-^@M-^S secure copy (remote file copy program)
	5
	6	SYNOPSIS
	7	scp [-346BCpqrv] [-c cipher] [-F ssh_config] [-i identity_file]
	8	[-l limit] [-o ssh_option] [-P port] [-S program] source ... target
	9
	10	DESCRIPTION
	11	scp copies files between hosts on a network. It uses ssh(1) for data
	12	transfer, and uses the same authentication and provides the same security
	13	as ssh(1). scp will ask for passwords or passphrases if they are needed
	14	for authentication.
	15
	16	The source and target may be specified as a local pathname, a remote host
	17	with optional path in the form [user@]host:[path], or a URI in the form
	18	scp://[user@]host[:port][/path]. Local file names can be made explicit
	19	using absolute or relative pathnames to avoid scp treating file names
	20	containing M-bM-^@M-^X:M-bM-^@M-^Y as host specifiers.
	21
	22	When copying between two remote hosts, if the URI format is used, a port
	23	may only be specified on the target if the -3 option is used.
	24
	25	The options are as follows:
	26
	27	-3 Copies between two remote hosts are transferred through the local
	28	host. Without this option the data is copied directly between
	29	the two remote hosts. Note that this option disables the
	30	progress meter.
	31
	32	-4 Forces scp to use IPv4 addresses only.
	33
	34	-6 Forces scp to use IPv6 addresses only.
	35
	36	-B Selects batch mode (prevents asking for passwords or
	37	passphrases).
	38
	39	-C Compression enable. Passes the -C flag to ssh(1) to enable
	40	compression.
	41
	42	-c cipher
	43	Selects the cipher to use for encrypting the data transfer. This
	44	option is directly passed to ssh(1).
	45
	46	-F ssh_config
	47	Specifies an alternative per-user configuration file for ssh.
	48	This option is directly passed to ssh(1).
	49
	50	-i identity_file
	51	Selects the file from which the identity (private key) for public
	52	key authentication is read. This option is directly passed to
	53	ssh(1).
	54
	55	-l limit
	56	Limits the used bandwidth, specified in Kbit/s.
	57
	58	-o ssh_option
	59	Can be used to pass options to ssh in the format used in
	60	ssh_config(5). This is useful for specifying options for which
	61	there is no separate scp command-line flag. For full details of
	62	the options listed below, and their possible values, see
	63	ssh_config(5).
	64
	65	AddressFamily
	66	BatchMode
	67	BindAddress
	68	BindInterface
	69	CanonicalDomains
	70	CanonicalizeFallbackLocal
	71	CanonicalizeHostname
	72	CanonicalizeMaxDots
	73	CanonicalizePermittedCNAMEs
	74	CASignatureAlgorithms
	75	CertificateFile
	76	ChallengeResponseAuthentication
	77	CheckHostIP
	78	Ciphers
	79	Compression
	80	ConnectionAttempts
	81	ConnectTimeout
	82	ControlMaster
	83	ControlPath
	84	ControlPersist
	85	GlobalKnownHostsFile
	86	GSSAPIAuthentication
	87	GSSAPIDelegateCredentials
	88	HashKnownHosts
	89	Host
	90	HostbasedAuthentication
	91	HostbasedKeyTypes
	92	HostKeyAlgorithms
	93	HostKeyAlias
	94	HostName
	95	IdentitiesOnly
	96	IdentityAgent
	97	IdentityFile
	98	IPQoS
	99	KbdInteractiveAuthentication
	100	KbdInteractiveDevices
	101	KexAlgorithms
	102	LogLevel
	103	MACs
	104	NoHostAuthenticationForLocalhost
	105	NumberOfPasswordPrompts
	106	PasswordAuthentication
	107	PKCS11Provider
	108	Port
	109	PreferredAuthentications
	110	ProxyCommand
	111	ProxyJump
	112	PubkeyAcceptedKeyTypes
	113	PubkeyAuthentication
	114	RekeyLimit
	115	SendEnv
	116	ServerAliveInterval
	117	ServerAliveCountMax
	118	SetEnv
	119	StrictHostKeyChecking
	120	TCPKeepAlive
	121	UpdateHostKeys
	122	User
	123	UserKnownHostsFile
	124	VerifyHostKeyDNS
	125
	126	-P port
	127	Specifies the port to connect to on the remote host. Note that
	128	this option is written with a capital M-bM-^@M-^XPM-bM-^@M-^Y, because -p is already
	129	reserved for preserving the times and modes of the file.
	130
	131	-p Preserves modification times, access times, and modes from the
	132	original file.
	133
	134	-q Quiet mode: disables the progress meter as well as warning and
	135	diagnostic messages from ssh(1).
	136
	137	-r Recursively copy entire directories. Note that scp follows
	138	symbolic links encountered in the tree traversal.
	139
	140	-S program
	141	Name of program to use for the encrypted connection. The program
	142	must understand ssh(1) options.
	143
	144	-v Verbose mode. Causes scp and ssh(1) to print debugging messages
	145	about their progress. This is helpful in debugging connection,
	146	authentication, and configuration problems.
	147
	148	EXIT STATUS
	149	The scp utility exitsM-BM- 0 on success, andM-BM- >0 if an error occurs.
	150
	151	SEE ALSO
	152	sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), ssh_config(5),
	153	sshd(8)
	154
	155	HISTORY
	156	scp is based on the rcp program in BSD source code from the Regents of
	157	the University of California.
	158
	159	AUTHORS
	160	Timo Rinne <tri@iki.fi>
	161	Tatu Ylonen <ylo@cs.hut.fi>
	162
	163	OpenBSD 6.4 September 20, 2018 OpenBSD 6.4