1 files changed, 168 insertions, 0 deletions
diff --git a/scp.0 b/scp.0
new file mode 100644
index 000000000..46a084698
--- /dev/null
+++ b/scp.0
@@ -0,0 +1,168 @@
+SCP(1)                      General Commands Manual                     SCP(1)
+NAME
+     scp M-bM-^@M-^S secure copy (remote file copy program)
+SYNOPSIS
+     scp [-12346BCpqrv] [-c cipher] [-F ssh_config] [-i identity_file]
+         [-l limit] [-o ssh_option] [-P port] [-S program]
+         [[user@]host1:]file1 ... [[user@]host2:]file2
+DESCRIPTION
+     scp copies files between hosts on a network.  It uses ssh(1) for data
+     transfer, and uses the same authentication and provides the same security
+     as ssh(1).  scp will ask for passwords or passphrases if they are needed
+     for authentication.
+     File names may contain a user and host specification to indicate that the
+     file is to be copied to/from that host.  Local file names can be made
+     explicit using absolute or relative pathnames to avoid scp treating file
+     names containing M-bM-^@M-^X:M-bM-^@M-^Y as host specifiers.  Copies between two remote hosts
+     are also permitted.
+     The options are as follows:
+     -1      Forces scp to use protocol 1.
+     -2      Forces scp to use protocol 2.
+     -3      Copies between two remote hosts are transferred through the local
+             host.  Without this option the data is copied directly between
+             the two remote hosts.  Note that this option disables the
+             progress meter.
+     -4      Forces scp to use IPv4 addresses only.
+     -6      Forces scp to use IPv6 addresses only.
+     -B      Selects batch mode (prevents asking for passwords or
+             passphrases).
+     -C      Compression enable.  Passes the -C flag to ssh(1) to enable
+             compression.
+     -c cipher
+             Selects the cipher to use for encrypting the data transfer.  This
+             option is directly passed to ssh(1).
+     -F ssh_config
+             Specifies an alternative per-user configuration file for ssh.
+             This option is directly passed to ssh(1).
+     -i identity_file
+             Selects the file from which the identity (private key) for public
+             key authentication is read.  This option is directly passed to
+             ssh(1).
+     -l limit
+             Limits the used bandwidth, specified in Kbit/s.
+     -o ssh_option
+             Can be used to pass options to ssh in the format used in
+             ssh_config(5).  This is useful for specifying options for which
+             there is no separate scp command-line flag.  For full details of
+             the options listed below, and their possible values, see
+             ssh_config(5).
+                   AddressFamily
+                   BatchMode
+                   BindAddress
+                   CanonicalDomains
+                   CanonicalizeFallbackLocal
+                   CanonicalizeHostname
+                   CanonicalizeMaxDots
+                   CanonicalizePermittedCNAMEs
+                   CertificateFile
+                   ChallengeResponseAuthentication
+                   CheckHostIP
+                   Cipher
+                   Ciphers
+                   Compression
+                   CompressionLevel
+                   ConnectionAttempts
+                   ConnectTimeout
+                   ControlMaster
+                   ControlPath
+                   ControlPersist
+                   GlobalKnownHostsFile
+                   GSSAPIAuthentication
+                   GSSAPIDelegateCredentials
+                   HashKnownHosts
+                   Host
+                   HostbasedAuthentication
+                   HostbasedKeyTypes
+                   HostKeyAlgorithms
+                   HostKeyAlias
+                   HostName
+                   IdentitiesOnly
+                   IdentityAgent
+                   IdentityFile
+                   IPQoS
+                   KbdInteractiveAuthentication
+                   KbdInteractiveDevices
+                   KexAlgorithms
+                   LogLevel
+                   MACs
+                   NoHostAuthenticationForLocalhost
+                   NumberOfPasswordPrompts
+                   PasswordAuthentication
+                   PKCS11Provider
+                   Port
+                   PreferredAuthentications
+                   Protocol
+                   ProxyCommand
+                   ProxyJump
+                   PubkeyAcceptedKeyTypes
+                   PubkeyAuthentication
+                   RekeyLimit
+                   RhostsRSAAuthentication
+                   RSAAuthentication
+                   SendEnv
+                   ServerAliveInterval
+                   ServerAliveCountMax
+                   StrictHostKeyChecking
+                   TCPKeepAlive
+                   UpdateHostKeys
+                   UsePrivilegedPort
+                   User
+                   UserKnownHostsFile
+                   VerifyHostKeyDNS
+     -P port
+             Specifies the port to connect to on the remote host.  Note that
+             this option is written with a capital M-bM-^@M-^XPM-bM-^@M-^Y, because -p is already
+             reserved for preserving the times and modes of the file.
+     -p      Preserves modification times, access times, and modes from the
+             original file.
+     -q      Quiet mode: disables the progress meter as well as warning and
+             diagnostic messages from ssh(1).
+     -r      Recursively copy entire directories.  Note that scp follows
+             symbolic links encountered in the tree traversal.
+     -S program
+             Name of program to use for the encrypted connection.  The program
+             must understand ssh(1) options.
+     -v      Verbose mode.  Causes scp and ssh(1) to print debugging messages
+             about their progress.  This is helpful in debugging connection,
+             authentication, and configuration problems.
+EXIT STATUS
+     The scp utility exitsM-BM- 0 on success, andM-BM- >0 if an error occurs.
+SEE ALSO
+     sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), ssh_config(5),
+     sshd(8)
+HISTORY
+     scp is based on the rcp program in BSD source code from the Regents of
+     the University of California.
+AUTHORS
+     Timo Rinne <tri@iki.fi>
+     Tatu Ylonen <ylo@cs.hut.fi>
+OpenBSD 6.0                      July 16, 2016                     OpenBSD 6.0

diff --git a/scp.0 b/scp.0 new file mode 100644 index 000000000..46a084698 --- /dev/null +++ b/scp.0
@@ -0,0 +1,168 @@
	1	SCP(1) General Commands Manual SCP(1)
	2
	3	NAME
	4	scp M-bM-^@M-^S secure copy (remote file copy program)
	5
	6	SYNOPSIS
	7	scp [-12346BCpqrv] [-c cipher] [-F ssh_config] [-i identity_file]
	8	[-l limit] [-o ssh_option] [-P port] [-S program]
	9	[[user@]host1:]file1 ... [[user@]host2:]file2
	10
	11	DESCRIPTION
	12	scp copies files between hosts on a network. It uses ssh(1) for data
	13	transfer, and uses the same authentication and provides the same security
	14	as ssh(1). scp will ask for passwords or passphrases if they are needed
	15	for authentication.
	16
	17	File names may contain a user and host specification to indicate that the
	18	file is to be copied to/from that host. Local file names can be made
	19	explicit using absolute or relative pathnames to avoid scp treating file
	20	names containing M-bM-^@M-^X:M-bM-^@M-^Y as host specifiers. Copies between two remote hosts
	21	are also permitted.
	22
	23	The options are as follows:
	24
	25	-1 Forces scp to use protocol 1.
	26
	27	-2 Forces scp to use protocol 2.
	28
	29	-3 Copies between two remote hosts are transferred through the local
	30	host. Without this option the data is copied directly between
	31	the two remote hosts. Note that this option disables the
	32	progress meter.
	33
	34	-4 Forces scp to use IPv4 addresses only.
	35
	36	-6 Forces scp to use IPv6 addresses only.
	37
	38	-B Selects batch mode (prevents asking for passwords or
	39	passphrases).
	40
	41	-C Compression enable. Passes the -C flag to ssh(1) to enable
	42	compression.
	43
	44	-c cipher
	45	Selects the cipher to use for encrypting the data transfer. This
	46	option is directly passed to ssh(1).
	47
	48	-F ssh_config
	49	Specifies an alternative per-user configuration file for ssh.
	50	This option is directly passed to ssh(1).
	51
	52	-i identity_file
	53	Selects the file from which the identity (private key) for public
	54	key authentication is read. This option is directly passed to
	55	ssh(1).
	56
	57	-l limit
	58	Limits the used bandwidth, specified in Kbit/s.
	59
	60	-o ssh_option
	61	Can be used to pass options to ssh in the format used in
	62	ssh_config(5). This is useful for specifying options for which
	63	there is no separate scp command-line flag. For full details of
	64	the options listed below, and their possible values, see
	65	ssh_config(5).
	66
	67	AddressFamily
	68	BatchMode
	69	BindAddress
	70	CanonicalDomains
	71	CanonicalizeFallbackLocal
	72	CanonicalizeHostname
	73	CanonicalizeMaxDots
	74	CanonicalizePermittedCNAMEs
	75	CertificateFile
	76	ChallengeResponseAuthentication
	77	CheckHostIP
	78	Cipher
	79	Ciphers
	80	Compression
	81	CompressionLevel
	82	ConnectionAttempts
	83	ConnectTimeout
	84	ControlMaster
	85	ControlPath
	86	ControlPersist
	87	GlobalKnownHostsFile
	88	GSSAPIAuthentication
	89	GSSAPIDelegateCredentials
	90	HashKnownHosts
	91	Host
	92	HostbasedAuthentication
	93	HostbasedKeyTypes
	94	HostKeyAlgorithms
	95	HostKeyAlias
	96	HostName
	97	IdentitiesOnly
	98	IdentityAgent
	99	IdentityFile
	100	IPQoS
	101	KbdInteractiveAuthentication
	102	KbdInteractiveDevices
	103	KexAlgorithms
	104	LogLevel
	105	MACs
	106	NoHostAuthenticationForLocalhost
	107	NumberOfPasswordPrompts
	108	PasswordAuthentication
	109	PKCS11Provider
	110	Port
	111	PreferredAuthentications
	112	Protocol
	113	ProxyCommand
	114	ProxyJump
	115	PubkeyAcceptedKeyTypes
	116	PubkeyAuthentication
	117	RekeyLimit
	118	RhostsRSAAuthentication
	119	RSAAuthentication
	120	SendEnv
	121	ServerAliveInterval
	122	ServerAliveCountMax
	123	StrictHostKeyChecking
	124	TCPKeepAlive
	125	UpdateHostKeys
	126	UsePrivilegedPort
	127	User
	128	UserKnownHostsFile
	129	VerifyHostKeyDNS
	130
	131	-P port
	132	Specifies the port to connect to on the remote host. Note that
	133	this option is written with a capital M-bM-^@M-^XPM-bM-^@M-^Y, because -p is already
	134	reserved for preserving the times and modes of the file.
	135
	136	-p Preserves modification times, access times, and modes from the
	137	original file.
	138
	139	-q Quiet mode: disables the progress meter as well as warning and
	140	diagnostic messages from ssh(1).
	141
	142	-r Recursively copy entire directories. Note that scp follows
	143	symbolic links encountered in the tree traversal.
	144
	145	-S program
	146	Name of program to use for the encrypted connection. The program
	147	must understand ssh(1) options.
	148
	149	-v Verbose mode. Causes scp and ssh(1) to print debugging messages
	150	about their progress. This is helpful in debugging connection,
	151	authentication, and configuration problems.
	152
	153	EXIT STATUS
	154	The scp utility exitsM-BM- 0 on success, andM-BM- >0 if an error occurs.
	155
	156	SEE ALSO
	157	sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), ssh_config(5),
	158	sshd(8)
	159
	160	HISTORY
	161	scp is based on the rcp program in BSD source code from the Regents of
	162	the University of California.
	163
	164	AUTHORS
	165	Timo Rinne <tri@iki.fi>
	166	Tatu Ylonen <ylo@cs.hut.fi>
	167
	168	OpenBSD 6.0 July 16, 2016 OpenBSD 6.0