1 files changed, 164 insertions, 0 deletions
diff --git a/scp.0 b/scp.0
new file mode 100644
index 000000000..3f309fe03
--- /dev/null
+++ b/scp.0
@@ -0,0 +1,164 @@
+SCP(1)                      General Commands Manual                     SCP(1)
+NAME
+     scp M-bM-^@M-^S secure copy (remote file copy program)
+SYNOPSIS
+     scp [-12346BCpqrv] [-c cipher] [-F ssh_config] [-i identity_file]
+         [-l limit] [-o ssh_option] [-P port] [-S program]
+         [[user@]host1:]file1 ... [[user@]host2:]file2
+DESCRIPTION
+     scp copies files between hosts on a network.  It uses ssh(1) for data
+     transfer, and uses the same authentication and provides the same security
+     as ssh(1).  scp will ask for passwords or passphrases if they are needed
+     for authentication.
+     File names may contain a user and host specification to indicate that the
+     file is to be copied to/from that host.  Local file names can be made
+     explicit using absolute or relative pathnames to avoid scp treating file
+     names containing M-bM-^@M-^X:M-bM-^@M-^Y as host specifiers.  Copies between two remote hosts
+     are also permitted.
+     The options are as follows:
+     -1      Forces scp to use protocol 1.
+     -2      Forces scp to use protocol 2.
+     -3      Copies between two remote hosts are transferred through the local
+             host.  Without this option the data is copied directly between
+             the two remote hosts.  Note that this option disables the
+             progress meter.
+     -4      Forces scp to use IPv4 addresses only.
+     -6      Forces scp to use IPv6 addresses only.
+     -B      Selects batch mode (prevents asking for passwords or
+             passphrases).
+     -C      Compression enable.  Passes the -C flag to ssh(1) to enable
+             compression.
+     -c cipher
+             Selects the cipher to use for encrypting the data transfer.  This
+             option is directly passed to ssh(1).
+     -F ssh_config
+             Specifies an alternative per-user configuration file for ssh.
+             This option is directly passed to ssh(1).
+     -i identity_file
+             Selects the file from which the identity (private key) for public
+             key authentication is read.  This option is directly passed to
+             ssh(1).
+     -l limit
+             Limits the used bandwidth, specified in Kbit/s.
+     -o ssh_option
+             Can be used to pass options to ssh in the format used in
+             ssh_config(5).  This is useful for specifying options for which
+             there is no separate scp command-line flag.  For full details of
+             the options listed below, and their possible values, see
+             ssh_config(5).
+                   AddressFamily
+                   BatchMode
+                   BindAddress
+                   CanonicalDomains
+                   CanonicalizeFallbackLocal
+                   CanonicalizeHostname
+                   CanonicalizeMaxDots
+                   CanonicalizePermittedCNAMEs
+                   ChallengeResponseAuthentication
+                   CheckHostIP
+                   Cipher
+                   Ciphers
+                   Compression
+                   CompressionLevel
+                   ConnectionAttempts
+                   ConnectTimeout
+                   ControlMaster
+                   ControlPath
+                   ControlPersist
+                   GlobalKnownHostsFile
+                   GSSAPIAuthentication
+                   GSSAPIDelegateCredentials
+                   HashKnownHosts
+                   Host
+                   HostbasedAuthentication
+                   HostbasedKeyTypes
+                   HostKeyAlgorithms
+                   HostKeyAlias
+                   HostName
+                   IdentityFile
+                   IdentitiesOnly
+                   IPQoS
+                   KbdInteractiveAuthentication
+                   KbdInteractiveDevices
+                   KexAlgorithms
+                   LogLevel
+                   MACs
+                   NoHostAuthenticationForLocalhost
+                   NumberOfPasswordPrompts
+                   PasswordAuthentication
+                   PKCS11Provider
+                   Port
+                   PreferredAuthentications
+                   Protocol
+                   ProxyCommand
+                   PubkeyAuthentication
+                   RekeyLimit
+                   RhostsRSAAuthentication
+                   RSAAuthentication
+                   SendEnv
+                   ServerAliveInterval
+                   ServerAliveCountMax
+                   StrictHostKeyChecking
+                   TCPKeepAlive
+                   UpdateHostKeys
+                   UsePrivilegedPort
+                   User
+                   UserKnownHostsFile
+                   VerifyHostKeyDNS
+     -P port
+             Specifies the port to connect to on the remote host.  Note that
+             this option is written with a capital M-bM-^@M-^XPM-bM-^@M-^Y, because -p is already
+             reserved for preserving the times and modes of the file.
+     -p      Preserves modification times, access times, and modes from the
+             original file.
+     -q      Quiet mode: disables the progress meter as well as warning and
+             diagnostic messages from ssh(1).
+     -r      Recursively copy entire directories.  Note that scp follows
+             symbolic links encountered in the tree traversal.
+     -S program
+             Name of program to use for the encrypted connection.  The program
+             must understand ssh(1) options.
+     -v      Verbose mode.  Causes scp and ssh(1) to print debugging messages
+             about their progress.  This is helpful in debugging connection,
+             authentication, and configuration problems.
+EXIT STATUS
+     The scp utility exitsM-BM- 0 on success, andM-BM- >0 if an error occurs.
+SEE ALSO
+     sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), ssh_config(5),
+     sshd(8)
+HISTORY
+     scp is based on the rcp program in BSD source code from the Regents of
+     the University of California.
+AUTHORS
+     Timo Rinne <tri@iki.fi>
+     Tatu Ylonen <ylo@cs.hut.fi>
+OpenBSD 5.7                    January 30, 2015                    OpenBSD 5.7

diff --git a/scp.0 b/scp.0 new file mode 100644 index 000000000..3f309fe03 --- /dev/null +++ b/scp.0
@@ -0,0 +1,164 @@
	1	SCP(1) General Commands Manual SCP(1)
	2
	3	NAME
	4	scp M-bM-^@M-^S secure copy (remote file copy program)
	5
	6	SYNOPSIS
	7	scp [-12346BCpqrv] [-c cipher] [-F ssh_config] [-i identity_file]
	8	[-l limit] [-o ssh_option] [-P port] [-S program]
	9	[[user@]host1:]file1 ... [[user@]host2:]file2
	10
	11	DESCRIPTION
	12	scp copies files between hosts on a network. It uses ssh(1) for data
	13	transfer, and uses the same authentication and provides the same security
	14	as ssh(1). scp will ask for passwords or passphrases if they are needed
	15	for authentication.
	16
	17	File names may contain a user and host specification to indicate that the
	18	file is to be copied to/from that host. Local file names can be made
	19	explicit using absolute or relative pathnames to avoid scp treating file
	20	names containing M-bM-^@M-^X:M-bM-^@M-^Y as host specifiers. Copies between two remote hosts
	21	are also permitted.
	22
	23	The options are as follows:
	24
	25	-1 Forces scp to use protocol 1.
	26
	27	-2 Forces scp to use protocol 2.
	28
	29	-3 Copies between two remote hosts are transferred through the local
	30	host. Without this option the data is copied directly between
	31	the two remote hosts. Note that this option disables the
	32	progress meter.
	33
	34	-4 Forces scp to use IPv4 addresses only.
	35
	36	-6 Forces scp to use IPv6 addresses only.
	37
	38	-B Selects batch mode (prevents asking for passwords or
	39	passphrases).
	40
	41	-C Compression enable. Passes the -C flag to ssh(1) to enable
	42	compression.
	43
	44	-c cipher
	45	Selects the cipher to use for encrypting the data transfer. This
	46	option is directly passed to ssh(1).
	47
	48	-F ssh_config
	49	Specifies an alternative per-user configuration file for ssh.
	50	This option is directly passed to ssh(1).
	51
	52	-i identity_file
	53	Selects the file from which the identity (private key) for public
	54	key authentication is read. This option is directly passed to
	55	ssh(1).
	56
	57	-l limit
	58	Limits the used bandwidth, specified in Kbit/s.
	59
	60	-o ssh_option
	61	Can be used to pass options to ssh in the format used in
	62	ssh_config(5). This is useful for specifying options for which
	63	there is no separate scp command-line flag. For full details of
	64	the options listed below, and their possible values, see
	65	ssh_config(5).
	66
	67	AddressFamily
	68	BatchMode
	69	BindAddress
	70	CanonicalDomains
	71	CanonicalizeFallbackLocal
	72	CanonicalizeHostname
	73	CanonicalizeMaxDots
	74	CanonicalizePermittedCNAMEs
	75	ChallengeResponseAuthentication
	76	CheckHostIP
	77	Cipher
	78	Ciphers
	79	Compression
	80	CompressionLevel
	81	ConnectionAttempts
	82	ConnectTimeout
	83	ControlMaster
	84	ControlPath
	85	ControlPersist
	86	GlobalKnownHostsFile
	87	GSSAPIAuthentication
	88	GSSAPIDelegateCredentials
	89	HashKnownHosts
	90	Host
	91	HostbasedAuthentication
	92	HostbasedKeyTypes
	93	HostKeyAlgorithms
	94	HostKeyAlias
	95	HostName
	96	IdentityFile
	97	IdentitiesOnly
	98	IPQoS
	99	KbdInteractiveAuthentication
	100	KbdInteractiveDevices
	101	KexAlgorithms
	102	LogLevel
	103	MACs
	104	NoHostAuthenticationForLocalhost
	105	NumberOfPasswordPrompts
	106	PasswordAuthentication
	107	PKCS11Provider
	108	Port
	109	PreferredAuthentications
	110	Protocol
	111	ProxyCommand
	112	PubkeyAuthentication
	113	RekeyLimit
	114	RhostsRSAAuthentication
	115	RSAAuthentication
	116	SendEnv
	117	ServerAliveInterval
	118	ServerAliveCountMax
	119	StrictHostKeyChecking
	120	TCPKeepAlive
	121	UpdateHostKeys
	122	UsePrivilegedPort
	123	User
	124	UserKnownHostsFile
	125	VerifyHostKeyDNS
	126
	127	-P port
	128	Specifies the port to connect to on the remote host. Note that
	129	this option is written with a capital M-bM-^@M-^XPM-bM-^@M-^Y, because -p is already
	130	reserved for preserving the times and modes of the file.
	131
	132	-p Preserves modification times, access times, and modes from the
	133	original file.
	134
	135	-q Quiet mode: disables the progress meter as well as warning and
	136	diagnostic messages from ssh(1).
	137
	138	-r Recursively copy entire directories. Note that scp follows
	139	symbolic links encountered in the tree traversal.
	140
	141	-S program
	142	Name of program to use for the encrypted connection. The program
	143	must understand ssh(1) options.
	144
	145	-v Verbose mode. Causes scp and ssh(1) to print debugging messages
	146	about their progress. This is helpful in debugging connection,
	147	authentication, and configuration problems.
	148
	149	EXIT STATUS
	150	The scp utility exitsM-BM- 0 on success, andM-BM- >0 if an error occurs.
	151
	152	SEE ALSO
	153	sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), ssh_config(5),
	154	sshd(8)
	155
	156	HISTORY
	157	scp is based on the rcp program in BSD source code from the Regents of
	158	the University of California.
	159
	160	AUTHORS
	161	Timo Rinne <tri@iki.fi>
	162	Tatu Ylonen <ylo@cs.hut.fi>
	163
	164	OpenBSD 5.7 January 30, 2015 OpenBSD 5.7