1 files changed, 162 insertions, 0 deletions
diff --git a/scp.0 b/scp.0
new file mode 100644
index 000000000..11516924b
--- /dev/null
+++ b/scp.0
@@ -0,0 +1,162 @@
+SCP(1)                      General Commands Manual                     SCP(1)
+NAME
+     scp M-bM-^@M-^S secure copy (remote file copy program)
+SYNOPSIS
+     scp [-346BCpqrv] [-c cipher] [-F ssh_config] [-i identity_file]
+         [-l limit] [-o ssh_option] [-P port] [-S program] source ... target
+DESCRIPTION
+     scp copies files between hosts on a network.  It uses ssh(1) for data
+     transfer, and uses the same authentication and provides the same security
+     as ssh(1).  scp will ask for passwords or passphrases if they are needed
+     for authentication.
+     The source and target may be specified as a local pathname, a remote host
+     with optional path in the form [user@]host:[path], or a URI in the form
+     scp://[user@]host[:port][/path].  Local file names can be made explicit
+     using absolute or relative pathnames to avoid scp treating file names
+     containing M-bM-^@M-^X:M-bM-^@M-^Y as host specifiers.
+     When copying between two remote hosts, if the URI format is used, a port
+     may only be specified on the target if the -3 option is used.
+     The options are as follows:
+     -3      Copies between two remote hosts are transferred through the local
+             host.  Without this option the data is copied directly between
+             the two remote hosts.  Note that this option disables the
+             progress meter.
+     -4      Forces scp to use IPv4 addresses only.
+     -6      Forces scp to use IPv6 addresses only.
+     -B      Selects batch mode (prevents asking for passwords or
+             passphrases).
+     -C      Compression enable.  Passes the -C flag to ssh(1) to enable
+             compression.
+     -c cipher
+             Selects the cipher to use for encrypting the data transfer.  This
+             option is directly passed to ssh(1).
+     -F ssh_config
+             Specifies an alternative per-user configuration file for ssh.
+             This option is directly passed to ssh(1).
+     -i identity_file
+             Selects the file from which the identity (private key) for public
+             key authentication is read.  This option is directly passed to
+             ssh(1).
+     -l limit
+             Limits the used bandwidth, specified in Kbit/s.
+     -o ssh_option
+             Can be used to pass options to ssh in the format used in
+             ssh_config(5).  This is useful for specifying options for which
+             there is no separate scp command-line flag.  For full details of
+             the options listed below, and their possible values, see
+             ssh_config(5).
+                   AddressFamily
+                   BatchMode
+                   BindAddress
+                   BindInterface
+                   CanonicalDomains
+                   CanonicalizeFallbackLocal
+                   CanonicalizeHostname
+                   CanonicalizeMaxDots
+                   CanonicalizePermittedCNAMEs
+                   CertificateFile
+                   ChallengeResponseAuthentication
+                   CheckHostIP
+                   Ciphers
+                   Compression
+                   ConnectionAttempts
+                   ConnectTimeout
+                   ControlMaster
+                   ControlPath
+                   ControlPersist
+                   GlobalKnownHostsFile
+                   GSSAPIAuthentication
+                   GSSAPIDelegateCredentials
+                   HashKnownHosts
+                   Host
+                   HostbasedAuthentication
+                   HostbasedKeyTypes
+                   HostKeyAlgorithms
+                   HostKeyAlias
+                   HostName
+                   IdentitiesOnly
+                   IdentityAgent
+                   IdentityFile
+                   IPQoS
+                   KbdInteractiveAuthentication
+                   KbdInteractiveDevices
+                   KexAlgorithms
+                   LogLevel
+                   MACs
+                   NoHostAuthenticationForLocalhost
+                   NumberOfPasswordPrompts
+                   PasswordAuthentication
+                   PKCS11Provider
+                   Port
+                   PreferredAuthentications
+                   ProxyCommand
+                   ProxyJump
+                   PubkeyAcceptedKeyTypes
+                   PubkeyAuthentication
+                   RekeyLimit
+                   SendEnv
+                   ServerAliveInterval
+                   ServerAliveCountMax
+                   SetEnv
+                   StrictHostKeyChecking
+                   TCPKeepAlive
+                   UpdateHostKeys
+                   User
+                   UserKnownHostsFile
+                   VerifyHostKeyDNS
+     -P port
+             Specifies the port to connect to on the remote host.  Note that
+             this option is written with a capital M-bM-^@M-^XPM-bM-^@M-^Y, because -p is already
+             reserved for preserving the times and modes of the file.
+     -p      Preserves modification times, access times, and modes from the
+             original file.
+     -q      Quiet mode: disables the progress meter as well as warning and
+             diagnostic messages from ssh(1).
+     -r      Recursively copy entire directories.  Note that scp follows
+             symbolic links encountered in the tree traversal.
+     -S program
+             Name of program to use for the encrypted connection.  The program
+             must understand ssh(1) options.
+     -v      Verbose mode.  Causes scp and ssh(1) to print debugging messages
+             about their progress.  This is helpful in debugging connection,
+             authentication, and configuration problems.
+EXIT STATUS
+     The scp utility exitsM-BM- 0 on success, andM-BM- >0 if an error occurs.
+SEE ALSO
+     sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), ssh_config(5),
+     sshd(8)
+HISTORY
+     scp is based on the rcp program in BSD source code from the Regents of
+     the University of California.
+AUTHORS
+     Timo Rinne <tri@iki.fi>
+     Tatu Ylonen <ylo@cs.hut.fi>
+OpenBSD 6.4                      July 19, 2018                     OpenBSD 6.4

diff --git a/scp.0 b/scp.0 new file mode 100644 index 000000000..11516924b --- /dev/null +++ b/scp.0
@@ -0,0 +1,162 @@
	1	SCP(1) General Commands Manual SCP(1)
	2
	3	NAME
	4	scp M-bM-^@M-^S secure copy (remote file copy program)
	5
	6	SYNOPSIS
	7	scp [-346BCpqrv] [-c cipher] [-F ssh_config] [-i identity_file]
	8	[-l limit] [-o ssh_option] [-P port] [-S program] source ... target
	9
	10	DESCRIPTION
	11	scp copies files between hosts on a network. It uses ssh(1) for data
	12	transfer, and uses the same authentication and provides the same security
	13	as ssh(1). scp will ask for passwords or passphrases if they are needed
	14	for authentication.
	15
	16	The source and target may be specified as a local pathname, a remote host
	17	with optional path in the form [user@]host:[path], or a URI in the form
	18	scp://[user@]host[:port][/path]. Local file names can be made explicit
	19	using absolute or relative pathnames to avoid scp treating file names
	20	containing M-bM-^@M-^X:M-bM-^@M-^Y as host specifiers.
	21
	22	When copying between two remote hosts, if the URI format is used, a port
	23	may only be specified on the target if the -3 option is used.
	24
	25	The options are as follows:
	26
	27	-3 Copies between two remote hosts are transferred through the local
	28	host. Without this option the data is copied directly between
	29	the two remote hosts. Note that this option disables the
	30	progress meter.
	31
	32	-4 Forces scp to use IPv4 addresses only.
	33
	34	-6 Forces scp to use IPv6 addresses only.
	35
	36	-B Selects batch mode (prevents asking for passwords or
	37	passphrases).
	38
	39	-C Compression enable. Passes the -C flag to ssh(1) to enable
	40	compression.
	41
	42	-c cipher
	43	Selects the cipher to use for encrypting the data transfer. This
	44	option is directly passed to ssh(1).
	45
	46	-F ssh_config
	47	Specifies an alternative per-user configuration file for ssh.
	48	This option is directly passed to ssh(1).
	49
	50	-i identity_file
	51	Selects the file from which the identity (private key) for public
	52	key authentication is read. This option is directly passed to
	53	ssh(1).
	54
	55	-l limit
	56	Limits the used bandwidth, specified in Kbit/s.
	57
	58	-o ssh_option
	59	Can be used to pass options to ssh in the format used in
	60	ssh_config(5). This is useful for specifying options for which
	61	there is no separate scp command-line flag. For full details of
	62	the options listed below, and their possible values, see
	63	ssh_config(5).
	64
	65	AddressFamily
	66	BatchMode
	67	BindAddress
	68	BindInterface
	69	CanonicalDomains
	70	CanonicalizeFallbackLocal
	71	CanonicalizeHostname
	72	CanonicalizeMaxDots
	73	CanonicalizePermittedCNAMEs
	74	CertificateFile
	75	ChallengeResponseAuthentication
	76	CheckHostIP
	77	Ciphers
	78	Compression
	79	ConnectionAttempts
	80	ConnectTimeout
	81	ControlMaster
	82	ControlPath
	83	ControlPersist
	84	GlobalKnownHostsFile
	85	GSSAPIAuthentication
	86	GSSAPIDelegateCredentials
	87	HashKnownHosts
	88	Host
	89	HostbasedAuthentication
	90	HostbasedKeyTypes
	91	HostKeyAlgorithms
	92	HostKeyAlias
	93	HostName
	94	IdentitiesOnly
	95	IdentityAgent
	96	IdentityFile
	97	IPQoS
	98	KbdInteractiveAuthentication
	99	KbdInteractiveDevices
	100	KexAlgorithms
	101	LogLevel
	102	MACs
	103	NoHostAuthenticationForLocalhost
	104	NumberOfPasswordPrompts
	105	PasswordAuthentication
	106	PKCS11Provider
	107	Port
	108	PreferredAuthentications
	109	ProxyCommand
	110	ProxyJump
	111	PubkeyAcceptedKeyTypes
	112	PubkeyAuthentication
	113	RekeyLimit
	114	SendEnv
	115	ServerAliveInterval
	116	ServerAliveCountMax
	117	SetEnv
	118	StrictHostKeyChecking
	119	TCPKeepAlive
	120	UpdateHostKeys
	121	User
	122	UserKnownHostsFile
	123	VerifyHostKeyDNS
	124
	125	-P port
	126	Specifies the port to connect to on the remote host. Note that
	127	this option is written with a capital M-bM-^@M-^XPM-bM-^@M-^Y, because -p is already
	128	reserved for preserving the times and modes of the file.
	129
	130	-p Preserves modification times, access times, and modes from the
	131	original file.
	132
	133	-q Quiet mode: disables the progress meter as well as warning and
	134	diagnostic messages from ssh(1).
	135
	136	-r Recursively copy entire directories. Note that scp follows
	137	symbolic links encountered in the tree traversal.
	138
	139	-S program
	140	Name of program to use for the encrypted connection. The program
	141	must understand ssh(1) options.
	142
	143	-v Verbose mode. Causes scp and ssh(1) to print debugging messages
	144	about their progress. This is helpful in debugging connection,
	145	authentication, and configuration problems.
	146
	147	EXIT STATUS
	148	The scp utility exitsM-BM- 0 on success, andM-BM- >0 if an error occurs.
	149
	150	SEE ALSO
	151	sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), ssh_config(5),
	152	sshd(8)
	153
	154	HISTORY
	155	scp is based on the rcp program in BSD source code from the Regents of
	156	the University of California.
	157
	158	AUTHORS
	159	Timo Rinne <tri@iki.fi>
	160	Tatu Ylonen <ylo@cs.hut.fi>
	161
	162	OpenBSD 6.4 July 19, 2018 OpenBSD 6.4