1 files changed, 291 insertions, 257 deletions

diff --git a/ssh_config.0 b/ssh_config.0
index 1a2c64ce1..6c19de765 100644
--- a/ssh_config.0
+++ b/ssh_config.0
@@ -8,21 +8,21 @@ SYNOPSIS
      /etc/ssh/ssh_config
 
 DESCRIPTION
-     ssh(1) obtains configuration data from the following sources in the fol-
-     lowing order:
+     ssh(1) obtains configuration data from the following sources in the
+     following order:
 
            1.   command-line options
            2.   user's configuration file (~/.ssh/config)
            3.   system-wide configuration file (/etc/ssh/ssh_config)
 
-     For each parameter, the first obtained value will be used.  The configu-
-     ration files contain sections separated by ``Host'' specifications, and
-     that section is only applied for hosts that match one of the patterns
-     given in the specification.  The matched host name is the one given on
-     the command line.
+     For each parameter, the first obtained value will be used.  The
+     configuration files contain sections separated by ``Host''
+     specifications, and that section is only applied for hosts that match one
+     of the patterns given in the specification.  The matched host name is the
+     one given on the command line.
 
-     Since the first obtained value for each parameter is used, more host-spe-
-     cific declarations should be given near the beginning of the file, and
+     Since the first obtained value for each parameter is used, more host-
+     specific declarations should be given near the beginning of the file, and
      general defaults at the end.
 
      The configuration file has the following format:
@@ -30,29 +30,29 @@ DESCRIPTION
      Empty lines and lines starting with `#' are comments.  Otherwise a line
      is of the format ``keyword arguments''.  Configuration options may be
      separated by whitespace or optional whitespace and exactly one `='; the
-     latter format is useful to avoid the need to quote whitespace when speci-
-     fying configuration options using the ssh, scp, and sftp -o option.  Ar-
-     guments may optionally be enclosed in double quotes (") in order to rep-
-     resent arguments containing spaces.
-
-     The possible keywords and their meanings are as follows (note that key-
-     words are case-insensitive and arguments are case-sensitive):
-
-     Host    Restricts the following declarations (up to the next Host key-
-             word) to be only for those hosts that match one of the patterns
-             given after the keyword.  If more than one pattern is provided,
-             they should be separated by whitespace.  A single `*' as a pat-
-             tern can be used to provide global defaults for all hosts.  The
-             host is the hostname argument given on the command line (i.e. the
-             name is not converted to a canonicalized host name before match-
-             ing).
+     latter format is useful to avoid the need to quote whitespace when
+     specifying configuration options using the ssh, scp, and sftp -o option.
+     Arguments may optionally be enclosed in double quotes (") in order to
+     represent arguments containing spaces.
+
+     The possible keywords and their meanings are as follows (note that
+     keywords are case-insensitive and arguments are case-sensitive):
+
+     Host    Restricts the following declarations (up to the next Host
+             keyword) to be only for those hosts that match one of the
+             patterns given after the keyword.  If more than one pattern is
+             provided, they should be separated by whitespace.  A single `*'
+             as a pattern can be used to provide global defaults for all
+             hosts.  The host is the hostname argument given on the command
+             line (i.e. the name is not converted to a canonicalized host name
+             before matching).
 
              See PATTERNS for more information on patterns.
 
      AddressFamily
-             Specifies which address family to use when connecting.  Valid ar-
-             guments are ``any'', ``inet'' (use IPv4 only), or ``inet6'' (use
-             IPv6 only).
+             Specifies which address family to use when connecting.  Valid
+             arguments are ``any'', ``inet'' (use IPv4 only), or ``inet6''
+             (use IPv6 only).
 
      BatchMode
              If set to ``yes'', passphrase/password querying will be disabled.
@@ -61,8 +61,8 @@ DESCRIPTION
              ``yes'' or ``no''.  The default is ``no''.
 
      BindAddress
-             Use the specified address on the local machine as the source ad-
-             dress of the connection.  Only useful on systems with more than
+             Use the specified address on the local machine as the source
+             address of the connection.  Only useful on systems with more than
              one address.  Note that this option does not work if
              UsePrivilegedPort is set to ``yes''.
 
@@ -78,20 +78,21 @@ DESCRIPTION
              is set to ``no'', the check will not be executed.  The default is
              ``yes''.
 
-     Cipher  Specifies the cipher to use for encrypting the session in proto-
-             col version 1.  Currently, ``blowfish'', ``3des'', and ``des''
-             are supported.  des is only supported in the ssh(1) client for
-             interoperability with legacy protocol 1 implementations that do
-             not support the 3des cipher.  Its use is strongly discouraged due
-             to cryptographic weaknesses.  The default is ``3des''.
+     Cipher  Specifies the cipher to use for encrypting the session in
+             protocol version 1.  Currently, ``blowfish'', ``3des'', and
+             ``des'' are supported.  des is only supported in the ssh(1)
+             client for interoperability with legacy protocol 1
+             implementations that do not support the 3des cipher.  Its use is
+             strongly discouraged due to cryptographic weaknesses.  The
+             default is ``3des''.
 
      Ciphers
              Specifies the ciphers allowed for protocol version 2 in order of
-             preference.  Multiple ciphers must be comma-separated.  The sup-
-             ported ciphers are ``3des-cbc'', ``aes128-cbc'', ``aes192-cbc'',
-             ``aes256-cbc'', ``aes128-ctr'', ``aes192-ctr'', ``aes256-ctr'',
-             ``arcfour128'', ``arcfour256'', ``arcfour'', ``blowfish-cbc'',
-             and ``cast128-cbc''.  The default is:
+             preference.  Multiple ciphers must be comma-separated.  The
+             supported ciphers are ``3des-cbc'', ``aes128-cbc'',
+             ``aes192-cbc'', ``aes256-cbc'', ``aes128-ctr'', ``aes192-ctr'',
+             ``aes256-ctr'', ``arcfour128'', ``arcfour256'', ``arcfour'',
+             ``blowfish-cbc'', and ``cast128-cbc''.  The default is:
 
                 aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,
                 aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,
@@ -101,9 +102,10 @@ DESCRIPTION
              Specifies that all local, remote, and dynamic port forwardings
              specified in the configuration files or on the command line be
              cleared.  This option is primarily useful when used from the
-             ssh(1) command line to clear port forwardings set in configura-
-             tion files, and is automatically set by scp(1) and sftp(1).  The
-             argument must be ``yes'' or ``no''.  The default is ``no''.
+             ssh(1) command line to clear port forwardings set in
+             configuration files, and is automatically set by scp(1) and
+             sftp(1).  The argument must be ``yes'' or ``no''.  The default is
+             ``no''.
 
      Compression
              Specifies whether to use compression.  The argument must be
@@ -117,37 +119,37 @@ DESCRIPTION
              option applies to protocol version 1 only.
 
      ConnectionAttempts
-             Specifies the number of tries (one per second) to make before ex-
-             iting.  The argument must be an integer.  This may be useful in
+             Specifies the number of tries (one per second) to make before
+             exiting.  The argument must be an integer.  This may be useful in
              scripts if the connection sometimes fails.  The default is 1.
 
      ConnectTimeout
              Specifies the timeout (in seconds) used when connecting to the
              SSH server, instead of using the default system TCP timeout.
-             This value is used only when the target is down or really un-
-             reachable, not when it refuses the connection.
+             This value is used only when the target is down or really
+             unreachable, not when it refuses the connection.
 
      ControlMaster
              Enables the sharing of multiple sessions over a single network
-             connection.  When set to ``yes'', ssh(1) will listen for connec-
-             tions on a control socket specified using the ControlPath argu-
-             ment.  Additional sessions can connect to this socket using the
-             same ControlPath with ControlMaster set to ``no'' (the default).
-             These sessions will try to reuse the master instance's network
-             connection rather than initiating new ones, but will fall back to
-             connecting normally if the control socket does not exist, or is
-             not listening.
-
-             Setting this to ``ask'' will cause ssh to listen for control con-
-             nections, but require confirmation using the SSH_ASKPASS program
-             before they are accepted (see ssh-add(1) for details).  If the
-             ControlPath cannot be opened, ssh will continue without connect-
-             ing to a master instance.
-
-             X11 and ssh-agent(1) forwarding is supported over these multi-
-             plexed connections, however the display and agent forwarded will
-             be the one belonging to the master connection i.e. it is not pos-
-             sible to forward multiple displays or agents.
+             connection.  When set to ``yes'', ssh(1) will listen for
+             connections on a control socket specified using the ControlPath
+             argument.  Additional sessions can connect to this socket using
+             the same ControlPath with ControlMaster set to ``no'' (the
+             default).  These sessions will try to reuse the master instance's
+             network connection rather than initiating new ones, but will fall
+             back to connecting normally if the control socket does not exist,
+             or is not listening.
+
+             Setting this to ``ask'' will cause ssh to listen for control
+             connections, but require confirmation using the SSH_ASKPASS
+             program before they are accepted (see ssh-add(1) for details).
+             If the ControlPath cannot be opened, ssh will continue without
+             connecting to a master instance.
+
+             X11 and ssh-agent(1) forwarding is supported over these
+             multiplexed connections, however the display and agent forwarded
+             will be the one belonging to the master connection i.e. it is not
+             possible to forward multiple displays or agents.
 
              Two additional options allow for opportunistic multiplexing: try
              to use a master connection but fall back to creating a new one if
@@ -156,14 +158,30 @@ DESCRIPTION
              option.
 
      ControlPath
-             Specify the path to the control socket used for connection shar-
-             ing as described in the ControlMaster section above or the string
-             ``none'' to disable connection sharing.  In the path, `%l' will
-             be substituted by the local host name, `%h' will be substituted
-             by the target host name, `%p' the port, and `%r' by the remote
-             login username.  It is recommended that any ControlPath used for
-             opportunistic connection sharing include at least %h, %p, and %r.
-             This ensures that shared connections are uniquely identified.
+             Specify the path to the control socket used for connection
+             sharing as described in the ControlMaster section above or the
+             string ``none'' to disable connection sharing.  In the path, `%l'
+             will be substituted by the local host name, `%h' will be
+             substituted by the target host name, `%p' the port, and `%r' by
+             the remote login username.  It is recommended that any
+             ControlPath used for opportunistic connection sharing include at
+             least %h, %p, and %r.  This ensures that shared connections are
+             uniquely identified.
+
+     ControlPersist
+             When used in conjunction with ControlMaster, specifies that the
+             master connection should remain open in the background (waiting
+             for future client connections) after the initial client
+             connection has been closed.  If set to ``no'', then the master
+             connection will not be placed into the background, and will close
+             as soon as the initial client connection is closed.  If set to
+             ``yes'', then the master connection will remain in the background
+             indefinitely (until killed or closed via a mechanism such as the
+             ssh(1) ``-O exit'' option).  If set to a time in seconds, or a
+             time in any of the formats documented in sshd_config(5), then the
+             backgrounded master connection will automatically terminate after
+             it has remained idle (with no client connections) for the
+             specified time.
 
      DynamicForward
              Specifies that a TCP port on the local machine be forwarded over
@@ -171,14 +189,13 @@ DESCRIPTION
              determine where to connect to from the remote machine.
 
              The argument must be [bind_address:]port.  IPv6 addresses can be
-             specified by enclosing addresses in square brackets or by using
-             an alternative syntax: [bind_address/]port.  By default, the lo-
-             cal port is bound in accordance with the GatewayPorts setting.
-             However, an explicit bind_address may be used to bind the connec-
-             tion to a specific address.  The bind_address of ``localhost''
-             indicates that the listening port be bound for local use only,
-             while an empty address or `*' indicates that the port should be
-             available from all interfaces.
+             specified by enclosing addresses in square brackets.  By default,
+             the local port is bound in accordance with the GatewayPorts
+             setting.  However, an explicit bind_address may be used to bind
+             the connection to a specific address.  The bind_address of
+             ``localhost'' indicates that the listening port be bound for
+             local use only, while an empty address or `*' indicates that the
+             port should be available from all interfaces.
 
              Currently the SOCKS4 and SOCKS5 protocols are supported, and
              ssh(1) will act as a SOCKS server.  Multiple forwardings may be
@@ -196,9 +213,9 @@ DESCRIPTION
      EscapeChar
              Sets the escape character (default: `~').  The escape character
              can also be set on the command line.  The argument should be a
-             single character, `^' followed by a letter, or ``none'' to dis-
-             able the escape character entirely (making the connection trans-
-             parent for binary data).
+             single character, `^' followed by a letter, or ``none'' to
+             disable the escape character entirely (making the connection
+             transparent for binary data).
 
      ExitOnForwardFailure
              Specifies whether ssh(1) should terminate the connection if it
@@ -220,26 +237,34 @@ DESCRIPTION
              the agent.
 
      ForwardX11
-             Specifies whether X11 connections will be automatically redirect-
-             ed over the secure channel and DISPLAY set.  The argument must be
-             ``yes'' or ``no''.  The default is ``no''.
+             Specifies whether X11 connections will be automatically
+             redirected over the secure channel and DISPLAY set.  The argument
+             must be ``yes'' or ``no''.  The default is ``no''.
 
              X11 forwarding should be enabled with caution.  Users with the
              ability to bypass file permissions on the remote host (for the
-             user's X11 authorization database) can access the local X11 dis-
-             play through the forwarded connection.  An attacker may then be
-             able to perform activities such as keystroke monitoring if the
+             user's X11 authorization database) can access the local X11
+             display through the forwarded connection.  An attacker may then
+             be able to perform activities such as keystroke monitoring if the
              ForwardX11Trusted option is also enabled.
 
+     ForwardX11Timeout
+             Specify a timeout for untrusted X11 forwarding using the format
+             described in the TIME FORMATS section of sshd_config(5).  X11
+             connections received by ssh(1) after this time will be refused.
+             The default is to disable untrusted X11 forwarding after twenty
+             minutes has elapsed.
+
      ForwardX11Trusted
              If this option is set to ``yes'', remote X11 clients will have
              full access to the original X11 display.
 
-             If this option is set to ``no'', remote X11 clients will be con-
-             sidered untrusted and prevented from stealing or tampering with
-             data belonging to trusted X11 clients.  Furthermore, the xauth(1)
-             token used for the session will be set to expire after 20 min-
-             utes.  Remote clients will be refused access after this time.
+             If this option is set to ``no'', remote X11 clients will be
+             considered untrusted and prevented from stealing or tampering
+             with data belonging to trusted X11 clients.  Furthermore, the
+             xauth(1) token used for the session will be set to expire after
+             20 minutes.  Remote clients will be refused access after this
+             time.
 
              The default is ``no''.
 
@@ -250,11 +275,11 @@ DESCRIPTION
              Specifies whether remote hosts are allowed to connect to local
              forwarded ports.  By default, ssh(1) binds local port forwardings
              to the loopback address.  This prevents other remote hosts from
-             connecting to forwarded ports.  GatewayPorts can be used to spec-
-             ify that ssh should bind local port forwardings to the wildcard
-             address, thus allowing remote hosts to connect to forwarded
-             ports.  The argument must be ``yes'' or ``no''.  The default is
-             ``no''.
+             connecting to forwarded ports.  GatewayPorts can be used to
+             specify that ssh should bind local port forwardings to the
+             wildcard address, thus allowing remote hosts to connect to
+             forwarded ports.  The argument must be ``yes'' or ``no''.  The
+             default is ``no''.
 
      GlobalKnownHostsFile
              Specifies a file to use for the global host key database instead
@@ -267,23 +292,23 @@ DESCRIPTION
 
      GSSAPIDelegateCredentials
              Forward (delegate) credentials to the server.  The default is
-             ``no''.  Note that this option applies to protocol version 2 on-
-             ly.
+             ``no''.  Note that this option applies to protocol version 2
+             only.
 
      HashKnownHosts
              Indicates that ssh(1) should hash host names and addresses when
              they are added to ~/.ssh/known_hosts.  These hashed names may be
-             used normally by ssh(1) and sshd(8), but they do not reveal iden-
-             tifying information should the file's contents be disclosed.  The
-             default is ``no''.  Note that existing names and addresses in
+             used normally by ssh(1) and sshd(8), but they do not reveal
+             identifying information should the file's contents be disclosed.
+             The default is ``no''.  Note that existing names and addresses in
              known hosts files will not be converted automatically, but may be
              manually hashed using ssh-keygen(1).
 
      HostbasedAuthentication
              Specifies whether to try rhosts based authentication with public
              key authentication.  The argument must be ``yes'' or ``no''.  The
-             default is ``no''.  This option applies to protocol version 2 on-
-             ly and is similar to RhostsRSAAuthentication.
+             default is ``no''.  This option applies to protocol version 2
+             only and is similar to RhostsRSAAuthentication.
 
      HostKeyAlgorithms
              Specifies the protocol version 2 host key algorithms that the
@@ -293,15 +318,18 @@ DESCRIPTION
      HostKeyAlias
              Specifies an alias that should be used instead of the real host
              name when looking up or saving the host key in the host key
-             database files.  This option is useful for tunneling SSH connec-
-             tions or for multiple servers running on a single host.
+             database files.  This option is useful for tunneling SSH
+             connections or for multiple servers running on a single host.
 
      HostName
              Specifies the real host name to log into.  This can be used to
-             specify nicknames or abbreviations for hosts.  The default is the
-             name given on the command line.  Numeric IP addresses are also
-             permitted (both on the command line and in HostName specifica-
-             tions).
+             specify nicknames or abbreviations for hosts.  If the hostname
+             contains the character sequence `%h', then this will be replaced
+             with the host name specified on the commandline (this is useful
+             for manipulating unqualified names).  The default is the name
+             given on the command line.  Numeric IP addresses are also
+             permitted (both on the command line and in HostName
+             specifications).
 
      IdentitiesOnly
              Specifies that ssh(1) should only use the authentication identity
@@ -314,90 +342,91 @@ DESCRIPTION
      IdentityFile
              Specifies a file from which the user's RSA or DSA authentication
              identity is read.  The default is ~/.ssh/identity for protocol
-             version 1, and ~/.ssh/id_rsa and ~/.ssh/id_dsa for protocol ver-
-             sion 2.  Additionally, any identities represented by the authen-
-             tication agent will be used for authentication.  ssh(1) will try
-             to load certificate information from the filename obtained by ap-
-             pending -cert.pub to the path of a specified IdentityFile.
+             version 1, and ~/.ssh/id_rsa and ~/.ssh/id_dsa for protocol
+             version 2.  Additionally, any identities represented by the
+             authentication agent will be used for authentication.  ssh(1)
+             will try to load certificate information from the filename
+             obtained by appending -cert.pub to the path of a specified
+             IdentityFile.
 
              The file name may use the tilde syntax to refer to a user's home
              directory or one of the following escape characters: `%d' (local
              user's home directory), `%u' (local user name), `%l' (local host
              name), `%h' (remote host name) or `%r' (remote user name).
 
-             It is possible to have multiple identity files specified in con-
-             figuration files; all these identities will be tried in sequence.
+             It is possible to have multiple identity files specified in
+             configuration files; all these identities will be tried in
+             sequence.
 
      KbdInteractiveAuthentication
              Specifies whether to use keyboard-interactive authentication.
-             The argument to this keyword must be ``yes'' or ``no''.  The de-
-             fault is ``yes''.
+             The argument to this keyword must be ``yes'' or ``no''.  The
+             default is ``yes''.
 
      KbdInteractiveDevices
-             Specifies the list of methods to use in keyboard-interactive au-
-             thentication.  Multiple method names must be comma-separated.
+             Specifies the list of methods to use in keyboard-interactive
+             authentication.  Multiple method names must be comma-separated.
              The default is to use the server specified list.  The methods
              available vary depending on what the server supports.  For an
              OpenSSH server, it may be zero or more of: ``bsdauth'', ``pam'',
              and ``skey''.
 
      LocalCommand
-             Specifies a command to execute on the local machine after suc-
-             cessfully connecting to the server.  The command string extends
-             to the end of the line, and is executed with the user's shell.
-             The following escape character substitutions will be performed:
-             `%d' (local user's home directory), `%h' (remote host name), `%l'
-             (local host name), `%n' (host name as provided on the command
-             line), `%p' (remote port), `%r' (remote user name) or `%u' (local
-             user name).
+             Specifies a command to execute on the local machine after
+             successfully connecting to the server.  The command string
+             extends to the end of the line, and is executed with the user's
+             shell.  The following escape character substitutions will be
+             performed: `%d' (local user's home directory), `%h' (remote host
+             name), `%l' (local host name), `%n' (host name as provided on the
+             command line), `%p' (remote port), `%r' (remote user name) or
+             `%u' (local user name).
 
              The command is run synchronously and does not have access to the
              session of the ssh(1) that spawned it.  It should not be used for
              interactive commands.
 
-             This directive is ignored unless PermitLocalCommand has been en-
-             abled.
+             This directive is ignored unless PermitLocalCommand has been
+             enabled.
 
      LocalForward
              Specifies that a TCP port on the local machine be forwarded over
              the secure channel to the specified host and port from the remote
              machine.  The first argument must be [bind_address:]port and the
              second argument must be host:hostport.  IPv6 addresses can be
-             specified by enclosing addresses in square brackets or by using
-             an alternative syntax: [bind_address/]port and host/hostport.
-             Multiple forwardings may be specified, and additional forwardings
-             can be given on the command line.  Only the superuser can forward
-             privileged ports.  By default, the local port is bound in accor-
-             dance with the GatewayPorts setting.  However, an explicit
-             bind_address may be used to bind the connection to a specific ad-
-             dress.  The bind_address of ``localhost'' indicates that the lis-
-             tening port be bound for local use only, while an empty address
-             or `*' indicates that the port should be available from all in-
-             terfaces.
+             specified by enclosing addresses in square brackets.  Multiple
+             forwardings may be specified, and additional forwardings can be
+             given on the command line.  Only the superuser can forward
+             privileged ports.  By default, the local port is bound in
+             accordance with the GatewayPorts setting.  However, an explicit
+             bind_address may be used to bind the connection to a specific
+             address.  The bind_address of ``localhost'' indicates that the
+             listening port be bound for local use only, while an empty
+             address or `*' indicates that the port should be available from
+             all interfaces.
 
      LogLevel
              Gives the verbosity level that is used when logging messages from
-             ssh(1).  The possible values are: QUIET, FATAL, ERROR, INFO, VER-
-             BOSE, DEBUG, DEBUG1, DEBUG2, and DEBUG3.  The default is INFO.
+             ssh(1).  The possible values are: QUIET, FATAL, ERROR, INFO,
+             VERBOSE, DEBUG, DEBUG1, DEBUG2, and DEBUG3.  The default is INFO.
              DEBUG and DEBUG1 are equivalent.  DEBUG2 and DEBUG3 each specify
              higher levels of verbose output.
 
-     MACs    Specifies the MAC (message authentication code) algorithms in or-
-             der of preference.  The MAC algorithm is used in protocol version
-             2 for data integrity protection.  Multiple algorithms must be
-             comma-separated.  The default is:
+     MACs    Specifies the MAC (message authentication code) algorithms in
+             order of preference.  The MAC algorithm is used in protocol
+             version 2 for data integrity protection.  Multiple algorithms
+             must be comma-separated.  The default is:
 
                    hmac-md5,hmac-sha1,umac-64@openssh.com,
                    hmac-ripemd160,hmac-sha1-96,hmac-md5-96
 
      NoHostAuthenticationForLocalhost
              This option can be used if the home directory is shared across
-             machines.  In this case localhost will refer to a different ma-
-             chine on each of the machines and the user will get many warnings
-             about changed host keys.  However, this option disables host au-
-             thentication for localhost.  The argument to this keyword must be
-             ``yes'' or ``no''.  The default is to check the host key for lo-
-             calhost.
+             machines.  In this case localhost will refer to a different
+             machine on each of the machines and the user will get many
+             warnings about changed host keys.  However, this option disables
+             host authentication for localhost.  The argument to this keyword
+             must be ``yes'' or ``no''.  The default is to check the host key
+             for localhost.
 
      NumberOfPasswordPrompts
              Specifies the number of password prompts before giving up.  The
@@ -409,43 +438,47 @@ DESCRIPTION
              ``yes''.
 
      PermitLocalCommand
-             Allow local command execution via the LocalCommand option or us-
-             ing the !command escape sequence in ssh(1).  The argument must be
-             ``yes'' or ``no''.  The default is ``no''.
+             Allow local command execution via the LocalCommand option or
+             using the !command escape sequence in ssh(1).  The argument must
+             be ``yes'' or ``no''.  The default is ``no''.
 
      PKCS11Provider
              Specifies which PKCS#11 provider to use.  The argument to this
-             keyword is the PKCS#11 shared libary ssh(1) should use to commu-
-             nicate with a PKCS#11 token providing the user's private RSA key.
+             keyword is the PKCS#11 shared libary ssh(1) should use to
+             communicate with a PKCS#11 token providing the user's private RSA
+             key.
 
-     Port    Specifies the port number to connect on the remote host.  The de-
-             fault is 22.
+     Port    Specifies the port number to connect on the remote host.  The
+             default is 22.
 
      PreferredAuthentications
-             Specifies the order in which the client should try protocol 2 au-
-             thentication methods.  This allows a client to prefer one method
-             (e.g. keyboard-interactive) over another method (e.g. password)
-             The default for this option is: ``gssapi-with-
-             mic,hostbased,publickey,keyboard-interactive,password''.
+             Specifies the order in which the client should try protocol 2
+             authentication methods.  This allows a client to prefer one
+             method (e.g. keyboard-interactive) over another method (e.g.
+             password).  The default is:
+
+                   gssapi-with-mic,hostbased,publickey,
+                   keyboard-interactive,password
 
      Protocol
              Specifies the protocol versions ssh(1) should support in order of
-             preference.  The possible values are `1' and `2'.  Multiple ver-
-             sions must be comma-separated.  When this option is set to
-             ``2,1'' ssh will try version 2 and fall back to version 1 if ver-
-             sion 2 is not available.  The default is `2'.
+             preference.  The possible values are `1' and `2'.  Multiple
+             versions must be comma-separated.  When this option is set to
+             ``2,1'' ssh will try version 2 and fall back to version 1 if
+             version 2 is not available.  The default is `2'.
 
      ProxyCommand
-             Specifies the command to use to connect to the server.  The com-
-             mand string extends to the end of the line, and is executed with
-             the user's shell.  In the command string, `%h' will be substitut-
-             ed by the host name to connect and `%p' by the port.  The command
-             can be basically anything, and should read from its standard in-
-             put and write to its standard output.  It should eventually con-
-             nect an sshd(8) server running on some machine, or execute sshd
-             -i somewhere.  Host key management will be done using the Host-
-             Name of the host being connected (defaulting to the name typed by
-             the user).  Setting the command to ``none'' disables this option
+             Specifies the command to use to connect to the server.  The
+             command string extends to the end of the line, and is executed
+             with the user's shell.  In the command string, any occurrence of
+             `%h' will be substituted by the host name to connect, `%p' by the
+             port, and `%r' by the remote user name.  The command can be
+             basically anything, and should read from its standard input and
+             write to its standard output.  It should eventually connect an
+             sshd(8) server running on some machine, or execute sshd -i
+             somewhere.  Host key management will be done using the HostName
+             of the host being connected (defaulting to the name typed by the
+             user).  Setting the command to ``none'' disables this option
              entirely.  Note that CheckHostIP is not available for connects
              with a proxy command.
 
@@ -461,32 +494,32 @@ DESCRIPTION
              ``yes''.  This option applies to protocol version 2 only.
 
      RekeyLimit
-             Specifies the maximum amount of data that may be transmitted be-
-             fore the session key is renegotiated.  The argument is the number
-             of bytes, with an optional suffix of `K', `M', or `G' to indicate
-             Kilobytes, Megabytes, or Gigabytes, respectively.  The default is
-             between `1G' and `4G', depending on the cipher.  This option ap-
-             plies to protocol version 2 only.
+             Specifies the maximum amount of data that may be transmitted
+             before the session key is renegotiated.  The argument is the
+             number of bytes, with an optional suffix of `K', `M', or `G' to
+             indicate Kilobytes, Megabytes, or Gigabytes, respectively.  The
+             default is between `1G' and `4G', depending on the cipher.  This
+             option applies to protocol version 2 only.
 
      RemoteForward
              Specifies that a TCP port on the remote machine be forwarded over
              the secure channel to the specified host and port from the local
              machine.  The first argument must be [bind_address:]port and the
              second argument must be host:hostport.  IPv6 addresses can be
-             specified by enclosing addresses in square brackets or by using
-             an alternative syntax: [bind_address/]port and host/hostport.
-             Multiple forwardings may be specified, and additional forwardings
-             can be given on the command line.  Privileged ports can be for-
-             warded only when logging in as root on the remote machine.
+             specified by enclosing addresses in square brackets.  Multiple
+             forwardings may be specified, and additional forwardings can be
+             given on the command line.  Privileged ports can be forwarded
+             only when logging in as root on the remote machine.
 
              If the port argument is `0', the listen port will be dynamically
              allocated on the server and reported to the client at run time.
 
              If the bind_address is not specified, the default is to only bind
              to loopback addresses.  If the bind_address is `*' or an empty
-             string, then the forwarding is requested to listen on all inter-
-             faces.  Specifying a remote bind_address will only succeed if the
-             server's GatewayPorts option is enabled (see sshd_config(5)).
+             string, then the forwarding is requested to listen on all
+             interfaces.  Specifying a remote bind_address will only succeed
+             if the server's GatewayPorts option is enabled (see
+             sshd_config(5)).
 
      RhostsRSAAuthentication
              Specifies whether to try rhosts based authentication with RSA
@@ -497,9 +530,9 @@ DESCRIPTION
      RSAAuthentication
              Specifies whether to try RSA authentication.  The argument to
              this keyword must be ``yes'' or ``no''.  RSA authentication will
-             only be attempted if the identity file exists, or an authentica-
-             tion agent is running.  The default is ``yes''.  Note that this
-             option applies to protocol version 1 only.
+             only be attempted if the identity file exists, or an
+             authentication agent is running.  The default is ``yes''.  Note
+             that this option applies to protocol version 1 only.
 
      SendEnv
              Specifies what variables from the local environ(7) should be sent
@@ -507,25 +540,25 @@ DESCRIPTION
              for protocol 2.  The server must also support it, and the server
              must be configured to accept these environment variables.  Refer
              to AcceptEnv in sshd_config(5) for how to configure the server.
-             Variables are specified by name, which may contain wildcard char-
-             acters.  Multiple environment variables may be separated by
-             whitespace or spread across multiple SendEnv directives.  The de-
-             fault is not to send any environment variables.
+             Variables are specified by name, which may contain wildcard
+             characters.  Multiple environment variables may be separated by
+             whitespace or spread across multiple SendEnv directives.  The
+             default is not to send any environment variables.
 
              See PATTERNS for more information on patterns.
 
      ServerAliveCountMax
              Sets the number of server alive messages (see below) which may be
              sent without ssh(1) receiving any messages back from the server.
-             If this threshold is reached while server alive messages are be-
-             ing sent, ssh will disconnect from the server, terminating the
+             If this threshold is reached while server alive messages are
+             being sent, ssh will disconnect from the server, terminating the
              session.  It is important to note that the use of server alive
              messages is very different from TCPKeepAlive (below).  The server
-             alive messages are sent through the encrypted channel and there-
-             fore will not be spoofable.  The TCP keepalive option enabled by
-             TCPKeepAlive is spoofable.  The server alive mechanism is valu-
-             able when the client or server depend on knowing when a connec-
-             tion has become inactive.
+             alive messages are sent through the encrypted channel and
+             therefore will not be spoofable.  The TCP keepalive option
+             enabled by TCPKeepAlive is spoofable.  The server alive mechanism
+             is valuable when the client or server depend on knowing when a
+             connection has become inactive.
 
              The default value is 3.  If, for example, ServerAliveInterval
              (see below) is set to 15 and ServerAliveCountMax is left at the
@@ -542,27 +575,27 @@ DESCRIPTION
 
      StrictHostKeyChecking
              If this flag is set to ``yes'', ssh(1) will never automatically
-             add host keys to the ~/.ssh/known_hosts file, and refuses to con-
-             nect to hosts whose host key has changed.  This provides maximum
-             protection against trojan horse attacks, though it can be annoy-
-             ing when the /etc/ssh/ssh_known_hosts file is poorly maintained
-             or when connections to new hosts are frequently made.  This op-
-             tion forces the user to manually add all new hosts.  If this flag
-             is set to ``no'', ssh will automatically add new host keys to the
-             user known hosts files.  If this flag is set to ``ask'', new host
-             keys will be added to the user known host files only after the
-             user has confirmed that is what they really want to do, and ssh
-             will refuse to connect to hosts whose host key has changed.  The
-             host keys of known hosts will be verified automatically in all
-             cases.  The argument must be ``yes'', ``no'', or ``ask''.  The
-             default is ``ask''.
+             add host keys to the ~/.ssh/known_hosts file, and refuses to
+             connect to hosts whose host key has changed.  This provides
+             maximum protection against trojan horse attacks, though it can be
+             annoying when the /etc/ssh/ssh_known_hosts file is poorly
+             maintained or when connections to new hosts are frequently made.
+             This option forces the user to manually add all new hosts.  If
+             this flag is set to ``no'', ssh will automatically add new host
+             keys to the user known hosts files.  If this flag is set to
+             ``ask'', new host keys will be added to the user known host files
+             only after the user has confirmed that is what they really want
+             to do, and ssh will refuse to connect to hosts whose host key has
+             changed.  The host keys of known hosts will be verified
+             automatically in all cases.  The argument must be ``yes'',
+             ``no'', or ``ask''.  The default is ``ask''.
 
      TCPKeepAlive
              Specifies whether the system should send TCP keepalive messages
              to the other side.  If they are sent, death of the connection or
              crash of one of the machines will be properly noticed.  However,
-             this means that connections will die if the route is down tem-
-             porarily, and some people find it annoying.
+             this means that connections will die if the route is down
+             temporarily, and some people find it annoying.
 
              The default is ``yes'' (to send TCP keepalive messages), and the
              client will notice if the network goes down or the remote host
@@ -571,32 +604,32 @@ DESCRIPTION
              To disable TCP keepalive messages, the value should be set to
              ``no''.
 
-     Tunnel  Request tun(4) device forwarding between the client and the serv-
-             er.  The argument must be ``yes'', ``point-to-point'' (layer 3),
-             ``ethernet'' (layer 2), or ``no''.  Specifying ``yes'' requests
-             the default tunnel mode, which is ``point-to-point''.  The de-
-             fault is ``no''.
+     Tunnel  Request tun(4) device forwarding between the client and the
+             server.  The argument must be ``yes'', ``point-to-point'' (layer
+             3), ``ethernet'' (layer 2), or ``no''.  Specifying ``yes''
+             requests the default tunnel mode, which is ``point-to-point''.
+             The default is ``no''.
 
      TunnelDevice
              Specifies the tun(4) devices to open on the client (local_tun)
              and the server (remote_tun).
 
-             The argument must be local_tun[:remote_tun].  The devices may be
+             The argument must be local_tun [:remote_tun].  The devices may be
              specified by numerical ID or the keyword ``any'', which uses the
              next available tunnel device.  If remote_tun is not specified, it
              defaults to ``any''.  The default is ``any:any''.
 
      UsePrivilegedPort
-             Specifies whether to use a privileged port for outgoing connec-
-             tions.  The argument must be ``yes'' or ``no''.  The default is
-             ``no''.  If set to ``yes'', ssh(1) must be setuid root.  Note
-             that this option must be set to ``yes'' for
+             Specifies whether to use a privileged port for outgoing
+             connections.  The argument must be ``yes'' or ``no''.  The
+             default is ``no''.  If set to ``yes'', ssh(1) must be setuid
+             root.  Note that this option must be set to ``yes'' for
              RhostsRSAAuthentication with older servers.
 
-     User    Specifies the user to log in as.  This can be useful when a dif-
-             ferent user name is used on different machines.  This saves the
-             trouble of having to remember to give the user name on the com-
-             mand line.
+     User    Specifies the user to log in as.  This can be useful when a
+             different user name is used on different machines.  This saves
+             the trouble of having to remember to give the user name on the
+             command line.
 
      UserKnownHostsFile
              Specifies a file to use for the user host key database instead of
@@ -620,9 +653,9 @@ DESCRIPTION
              If this flag is set to ``yes'', an ASCII art representation of
              the remote host key fingerprint is printed in addition to the hex
              fingerprint string at login and for unknown host keys.  If this
-             flag is set to ``no'', no fingerprint strings are printed at lo-
-             gin and only the hex fingerprint string will be printed for un-
-             known host keys.  The default is ``no''.
+             flag is set to ``no'', no fingerprint strings are printed at
+             login and only the hex fingerprint string will be printed for
+             unknown host keys.  The default is ``no''.
 
      XAuthLocation
              Specifies the full pathname of the xauth(1) program.  The default
@@ -631,9 +664,9 @@ DESCRIPTION
 PATTERNS
      A pattern consists of zero or more non-whitespace characters, `*' (a
      wildcard that matches zero or more characters), or `?' (a wildcard that
-     matches exactly one character).  For example, to specify a set of decla-
-     rations for any host in the ``.co.uk'' set of domains, the following pat-
-     tern could be used:
+     matches exactly one character).  For example, to specify a set of
+     declarations for any host in the ``.co.uk'' set of domains, the following
+     pattern could be used:
 
            Host *.co.uk
 
@@ -645,17 +678,18 @@ PATTERNS
      A pattern-list is a comma-separated list of patterns.  Patterns within
      pattern-lists may be negated by preceding them with an exclamation mark
      (`!').  For example, to allow a key to be used from anywhere within an
-     organisation except from the ``dialup'' pool, the following entry (in au-
-     thorized_keys) could be used:
+     organisation except from the ``dialup'' pool, the following entry (in
+     authorized_keys) could be used:
 
            from="!*.dialup.example.com,*.example.com"
 
 FILES
      ~/.ssh/config
              This is the per-user configuration file.  The format of this file
-             is described above.  This file is used by the SSH client.  Be-
-             cause of the potential for abuse, this file must have strict per-
-             missions: read/write for the user, and not accessible by others.
+             is described above.  This file is used by the SSH client.
+             Because of the potential for abuse, this file must have strict
+             permissions: read/write for the user, and not accessible by
+             others.
 
      /etc/ssh/ssh_config
              Systemwide configuration file.  This file provides defaults for
@@ -669,8 +703,8 @@ SEE ALSO
 AUTHORS
      OpenSSH is a derivative of the original and free ssh 1.2.12 release by
      Tatu Ylonen.  Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo
-     de Raadt and Dug Song removed many bugs, re-added newer features and cre-
-     ated OpenSSH.  Markus Friedl contributed the support for SSH protocol
+     de Raadt and Dug Song removed many bugs, re-added newer features and
+     created OpenSSH.  Markus Friedl contributed the support for SSH protocol
      versions 1.5 and 2.0.
 
-OpenBSD 4.7                     March 26, 2010                              11
+OpenBSD 4.8                     August 4, 2010                     OpenBSD 4.8