1 files changed, 574 insertions, 0 deletions

diff --git a/sshd.0 b/sshd.0
new file mode 100644
index 000000000..6e37c9fc1
--- /dev/null
+++ b/sshd.0
@@ -0,0 +1,574 @@
+SSHD(8)                 OpenBSD System Manager's Manual                SSHD(8)
+
+NAME
+     sshd - OpenSSH SSH daemon
+
+SYNOPSIS
+     sshd [-46DdeiqTt] [-b bits] [-C connection_spec] [-f config_file]
+          [-g login_grace_time] [-h host_key_file] [-k key_gen_time]
+          [-o option] [-p port] [-u len]
+
+DESCRIPTION
+     sshd (OpenSSH Daemon) is the daemon program for ssh(1).  Together these
+     programs replace rlogin(1) and rsh(1), and provide secure encrypted com-
+     munications between two untrusted hosts over an insecure network.
+
+     sshd listens for connections from clients.  It is normally started at
+     boot from /etc/rc.  It forks a new daemon for each incoming connection.
+     The forked daemons handle key exchange, encryption, authentication, com-
+     mand execution, and data exchange.
+
+     sshd can be configured using command-line options or a configuration file
+     (by default sshd_config(5)); command-line options override values speci-
+     fied in the configuration file.  sshd rereads its configuration file when
+     it receives a hangup signal, SIGHUP, by executing itself with the name
+     and options it was started with, e.g. /usr/sbin/sshd.
+
+     The options are as follows:
+
+     -4      Forces sshd to use IPv4 addresses only.
+
+     -6      Forces sshd to use IPv6 addresses only.
+
+     -b bits
+             Specifies the number of bits in the ephemeral protocol version 1
+             server key (default 1024).
+
+     -C connection_spec
+             Specify the connection parameters to use for the -T extended test
+             mode.  If provided, any Match directives in the configuration
+             file that would apply to the specified user, host, and address
+             will be set before the configuration is written to standard out-
+             put.  The connection parameters are supplied as keyword=value
+             pairs.  The keywords are ``user'', ``host'', and ``addr''.  All
+             are required and may be supplied in any order, either with multi-
+             ple -C options or as a comma-separated list.
+
+     -D      When this option is specified, sshd will not detach and does not
+             become a daemon.  This allows easy monitoring of sshd.
+
+     -d      Debug mode.  The server sends verbose debug output to the system
+             log, and does not put itself in the background.  The server also
+             will not fork and will only process one connection.  This option
+             is only intended for debugging for the server.  Multiple -d op-
+             tions increase the debugging level.  Maximum is 3.
+
+     -e      When this option is specified, sshd will send the output to the
+             standard error instead of the system log.
+
+     -f config_file
+             Specifies the name of the configuration file.  The default is
+             /etc/ssh/sshd_config.  sshd refuses to start if there is no con-
+             figuration file.
+
+     -g login_grace_time
+             Gives the grace time for clients to authenticate themselves (de-
+             fault 120 seconds).  If the client fails to authenticate the user
+             within this many seconds, the server disconnects and exits.  A
+             value of zero indicates no limit.
+
+     -h host_key_file
+             Specifies a file from which a host key is read.  This option must
+             be given if sshd is not run as root (as the normal host key files
+             are normally not readable by anyone but root).  The default is
+             /etc/ssh/ssh_host_key for protocol version 1, and
+             /etc/ssh/ssh_host_rsa_key and /etc/ssh/ssh_host_dsa_key for pro-
+             tocol version 2.  It is possible to have multiple host key files
+             for the different protocol versions and host key algorithms.
+
+     -i      Specifies that sshd is being run from inetd(8).  sshd is normally
+             not run from inetd because it needs to generate the server key
+             before it can respond to the client, and this may take tens of
+             seconds.  Clients would have to wait too long if the key was re-
+             generated every time.  However, with small key sizes (e.g. 512)
+             using sshd from inetd may be feasible.
+
+     -k key_gen_time
+             Specifies how often the ephemeral protocol version 1 server key
+             is regenerated (default 3600 seconds, or one hour).  The motiva-
+             tion for regenerating the key fairly often is that the key is not
+             stored anywhere, and after about an hour it becomes impossible to
+             recover the key for decrypting intercepted communications even if
+             the machine is cracked into or physically seized.  A value of ze-
+             ro indicates that the key will never be regenerated.
+
+     -o option
+             Can be used to give options in the format used in the configura-
+             tion file.  This is useful for specifying options for which there
+             is no separate command-line flag.  For full details of the op-
+             tions, and their values, see sshd_config(5).
+
+     -p port
+             Specifies the port on which the server listens for connections
+             (default 22).  Multiple port options are permitted.  Ports speci-
+             fied in the configuration file with the Port option are ignored
+             when a command-line port is specified.  Ports specified using the
+             ListenAddress option override command-line ports.
+
+     -q      Quiet mode.  Nothing is sent to the system log.  Normally the be-
+             ginning, authentication, and termination of each connection is
+             logged.
+
+     -T      Extended test mode.  Check the validity of the configuration
+             file, output the effective configuration to stdout and then exit.
+             Optionally, Match rules may be applied by specifying the connec-
+             tion parameters using one or more -C options.
+
+     -t      Test mode.  Only check the validity of the configuration file and
+             sanity of the keys.  This is useful for updating sshd reliably as
+             configuration options may change.
+
+     -u len  This option is used to specify the size of the field in the utmp
+             structure that holds the remote host name.  If the resolved host
+             name is longer than len, the dotted decimal value will be used
+             instead.  This allows hosts with very long host names that over-
+             flow this field to still be uniquely identified.  Specifying -u0
+             indicates that only dotted decimal addresses should be put into
+             the utmp file.  -u0 may also be used to prevent sshd from making
+             DNS requests unless the authentication mechanism or configuration
+             requires it.  Authentication mechanisms that may require DNS in-
+             clude RhostsRSAAuthentication, HostbasedAuthentication, and using
+             a from="pattern-list" option in a key file.  Configuration op-
+             tions that require DNS include using a USER@HOST pattern in
+             AllowUsers or DenyUsers.
+
+AUTHENTICATION
+     The OpenSSH SSH daemon supports SSH protocols 1 and 2.  Both protocols
+     are supported by default, though this can be changed via the Protocol op-
+     tion in sshd_config(5).  Protocol 2 supports both RSA and DSA keys; pro-
+     tocol 1 only supports RSA keys.  For both protocols, each host has a
+     host-specific key, normally 2048 bits, used to identify the host.
+
+     Forward security for protocol 1 is provided through an additional server
+     key, normally 768 bits, generated when the server starts.  This key is
+     normally regenerated every hour if it has been used, and is never stored
+     on disk.  Whenever a client connects, the daemon responds with its public
+     host and server keys.  The client compares the RSA host key against its
+     own database to verify that it has not changed.  The client then gener-
+     ates a 256-bit random number.  It encrypts this random number using both
+     the host key and the server key, and sends the encrypted number to the
+     server.  Both sides then use this random number as a session key which is
+     used to encrypt all further communications in the session.  The rest of
+     the session is encrypted using a conventional cipher, currently Blowfish
+     or 3DES, with 3DES being used by default.  The client selects the encryp-
+     tion algorithm to use from those offered by the server.
+
+     For protocol 2, forward security is provided through a Diffie-Hellman key
+     agreement.  This key agreement results in a shared session key.  The rest
+     of the session is encrypted using a symmetric cipher, currently 128-bit
+     AES, Blowfish, 3DES, CAST128, Arcfour, 192-bit AES, or 256-bit AES.  The
+     client selects the encryption algorithm to use from those offered by the
+     server.  Additionally, session integrity is provided through a crypto-
+     graphic message authentication code (hmac-md5, hmac-sha1, umac-64 or
+     hmac-ripemd160).
+
+     Finally, the server and the client enter an authentication dialog.  The
+     client tries to authenticate itself using host-based authentication, pub-
+     lic key authentication, challenge-response authentication, or password
+     authentication.
+
+     Regardless of the authentication type, the account is checked to ensure
+     that it is accessible.  An account is not accessible if it is locked,
+     listed in DenyUsers or its group is listed in DenyGroups .  The defini-
+     tion of a locked account is system dependant. Some platforms have their
+     own account database (eg AIX) and some modify the passwd field ( `*LK*'
+     on Solaris and UnixWare, `*' on HP-UX, containing `Nologin' on Tru64, a
+     leading `*LOCKED*' on FreeBSD and a leading `!' on most Linuxes).  If
+     there is a requirement to disable password authentication for the account
+     while allowing still public-key, then the passwd field should be set to
+     something other than these values (eg `NP' or `*NP*' ).
+
+     If the client successfully authenticates itself, a dialog for preparing
+     the session is entered.  At this time the client may request things like
+     allocating a pseudo-tty, forwarding X11 connections, forwarding TCP con-
+     nections, or forwarding the authentication agent connection over the se-
+     cure channel.
+
+     After this, the client either requests a shell or execution of a command.
+     The sides then enter session mode.  In this mode, either side may send
+     data at any time, and such data is forwarded to/from the shell or command
+     on the server side, and the user terminal in the client side.
+
+     When the user program terminates and all forwarded X11 and other connec-
+     tions have been closed, the server sends command exit status to the
+     client, and both sides exit.
+
+LOGIN PROCESS
+     When a user successfully logs in, sshd does the following:
+
+           1.   If the login is on a tty, and no command has been specified,
+                prints last login time and /etc/motd (unless prevented in the
+                configuration file or by ~/.hushlogin; see the FILES section).
+
+           2.   If the login is on a tty, records login time.
+
+           3.   Checks /etc/nologin; if it exists, prints contents and quits
+                (unless root).
+
+           4.   Changes to run with normal user privileges.
+
+           5.   Sets up basic environment.
+
+           6.   Reads the file ~/.ssh/environment, if it exists, and users are
+                allowed to change their environment.  See the
+                PermitUserEnvironment option in sshd_config(5).
+
+           7.   Changes to user's home directory.
+
+           8.   If ~/.ssh/rc exists, runs it; else if /etc/ssh/sshrc exists,
+                runs it; otherwise runs xauth.  The ``rc'' files are given the
+                X11 authentication protocol and cookie in standard input.  See
+                SSHRC, below.
+
+           9.   Runs user's shell or command.
+
+SSHRC
+     If the file ~/.ssh/rc exists, sh(1) runs it after reading the environment
+     files but before starting the user's shell or command.  It must not pro-
+     duce any output on stdout; stderr must be used instead.  If X11 forward-
+     ing is in use, it will receive the "proto cookie" pair in its standard
+     input (and DISPLAY in its environment).  The script must call xauth(1)
+     because sshd will not run xauth automatically to add X11 cookies.
+
+     The primary purpose of this file is to run any initialization routines
+     which may be needed before the user's home directory becomes accessible;
+     AFS is a particular example of such an environment.
+
+     This file will probably contain some initialization code followed by
+     something similar to:
+
+        if read proto cookie && [ -n "$DISPLAY" ]; then
+                if [ `echo $DISPLAY | cut -c1-10` = 'localhost:' ]; then
+                        # X11UseLocalhost=yes
+                        echo add unix:`echo $DISPLAY |
+                            cut -c11-` $proto $cookie
+                else
+                        # X11UseLocalhost=no
+                        echo add $DISPLAY $proto $cookie
+                fi | xauth -q -
+        fi
+
+     If this file does not exist, /etc/ssh/sshrc is run, and if that does not
+     exist either, xauth is used to add the cookie.
+
+AUTHORIZED_KEYS FILE FORMAT
+     AuthorizedKeysFile specifies the file containing public keys for public
+     key authentication; if none is specified, the default is
+     ~/.ssh/authorized_keys.  Each line of the file contains one key (empty
+     lines and lines starting with a `#' are ignored as comments).  Protocol 1
+     public keys consist of the following space-separated fields: options,
+     bits, exponent, modulus, comment.  Protocol 2 public key consist of: op-
+     tions, keytype, base64-encoded key, comment.  The options field is op-
+     tional; its presence is determined by whether the line starts with a num-
+     ber or not (the options field never starts with a number).  The bits, ex-
+     ponent, modulus, and comment fields give the RSA key for protocol version
+     1; the comment field is not used for anything (but may be convenient for
+     the user to identify the key).  For protocol version 2 the keytype is
+     ``ssh-dss'' or ``ssh-rsa''.
+
+     Note that lines in this file are usually several hundred bytes long (be-
+     cause of the size of the public key encoding) up to a limit of 8 kilo-
+     bytes, which permits DSA keys up to 8 kilobits and RSA keys up to 16
+     kilobits.  You don't want to type them in; instead, copy the
+     identity.pub, id_dsa.pub, or the id_rsa.pub file and edit it.
+
+     sshd enforces a minimum RSA key modulus size for protocol 1 and protocol
+     2 keys of 768 bits.
+
+     The options (if present) consist of comma-separated option specifica-
+     tions.  No spaces are permitted, except within double quotes.  The fol-
+     lowing option specifications are supported (note that option keywords are
+     case-insensitive):
+
+     command="command"
+             Specifies that the command is executed whenever this key is used
+             for authentication.  The command supplied by the user (if any) is
+             ignored.  The command is run on a pty if the client requests a
+             pty; otherwise it is run without a tty.  If an 8-bit clean chan-
+             nel is required, one must not request a pty or should specify no-
+             pty.  A quote may be included in the command by quoting it with a
+             backslash.  This option might be useful to restrict certain pub-
+             lic keys to perform just a specific operation.  An example might
+             be a key that permits remote backups but nothing else.  Note that
+             the client may specify TCP and/or X11 forwarding unless they are
+             explicitly prohibited.  The command originally supplied by the
+             client is available in the SSH_ORIGINAL_COMMAND environment vari-
+             able.  Note that this option applies to shell, command or subsys-
+             tem execution.
+
+     environment="NAME=value"
+             Specifies that the string is to be added to the environment when
+             logging in using this key.  Environment variables set this way
+             override other default environment values.  Multiple options of
+             this type are permitted.  Environment processing is disabled by
+             default and is controlled via the PermitUserEnvironment option.
+             This option is automatically disabled if UseLogin is enabled.
+
+     from="pattern-list"
+             Specifies that in addition to public key authentication, either
+             the canonical name of the remote host or its IP address must be
+             present in the comma-separated list of patterns.  See PATTERNS in
+             ssh_config(5) for more information on patterns.
+
+             In addition to the wildcard matching that may be applied to host-
+             names or addresses, a from stanza may match IP addresses using
+             CIDR address/masklen notation.
+
+             The purpose of this option is to optionally increase security:
+             public key authentication by itself does not trust the network or
+             name servers or anything (but the key); however, if somebody
+             somehow steals the key, the key permits an intruder to log in
+             from anywhere in the world.  This additional option makes using a
+             stolen key more difficult (name servers and/or routers would have
+             to be compromised in addition to just the key).
+
+     no-agent-forwarding
+             Forbids authentication agent forwarding when this key is used for
+             authentication.
+
+     no-port-forwarding
+             Forbids TCP forwarding when this key is used for authentication.
+             Any port forward requests by the client will return an error.
+             This might be used, e.g. in connection with the command option.
+
+     no-pty  Prevents tty allocation (a request to allocate a pty will fail).
+
+     no-user-rc
+             Disables execution of ~/.ssh/rc.
+
+     no-X11-forwarding
+             Forbids X11 forwarding when this key is used for authentication.
+             Any X11 forward requests by the client will return an error.
+
+     permitopen="host:port"
+             Limit local ``ssh -L'' port forwarding such that it may only con-
+             nect to the specified host and port.  IPv6 addresses can be spec-
+             ified with an alternative syntax: host/port.  Multiple permitopen
+             options may be applied separated by commas.  No pattern matching
+             is performed on the specified hostnames, they must be literal do-
+             mains or addresses.
+
+     tunnel="n"
+             Force a tun(4) device on the server.  Without this option, the
+             next available device will be used if the client requests a tun-
+             nel.
+
+     An example authorized_keys file:
+
+        # Comments allowed at start of line
+        ssh-rsa AAAAB3Nza...LiPk== user@example.net
+        from="*.sales.example.net,!pc.sales.example.net" ssh-rsa
+        AAAAB2...19Q== john@example.net
+        command="dump /home",no-pty,no-port-forwarding ssh-dss
+        AAAAC3...51R== example.net
+        permitopen="192.0.2.1:80",permitopen="192.0.2.2:25" ssh-dss
+        AAAAB5...21S==
+        tunnel="0",command="sh /etc/netstart tun0" ssh-rsa AAAA...==
+        jane@example.net
+
+SSH_KNOWN_HOSTS FILE FORMAT
+     The /etc/ssh/ssh_known_hosts and ~/.ssh/known_hosts files contain host
+     public keys for all known hosts.  The global file should be prepared by
+     the administrator (optional), and the per-user file is maintained auto-
+     matically: whenever the user connects from an unknown host, its key is
+     added to the per-user file.
+
+     Each line in these files contains the following fields: hostnames, bits,
+     exponent, modulus, comment.  The fields are separated by spaces.
+
+     Hostnames is a comma-separated list of patterns (`*' and `?' act as wild-
+     cards); each pattern in turn is matched against the canonical host name
+     (when authenticating a client) or against the user-supplied name (when
+     authenticating a server).  A pattern may also be preceded by `!' to indi-
+     cate negation: if the host name matches a negated pattern, it is not ac-
+     cepted (by that line) even if it matched another pattern on the line.  A
+     hostname or address may optionally be enclosed within `[' and `]' brack-
+     ets then followed by `:' and a non-standard port number.
+
+     Alternately, hostnames may be stored in a hashed form which hides host
+     names and addresses should the file's contents be disclosed.  Hashed
+     hostnames start with a `|' character.  Only one hashed hostname may ap-
+     pear on a single line and none of the above negation or wildcard opera-
+     tors may be applied.
+
+     Bits, exponent, and modulus are taken directly from the RSA host key;
+     they can be obtained, for example, from /etc/ssh/ssh_host_key.pub.  The
+     optional comment field continues to the end of the line, and is not used.
+
+     Lines starting with `#' and empty lines are ignored as comments.
+
+     When performing host authentication, authentication is accepted if any
+     matching line has the proper key.  It is thus permissible (but not recom-
+     mended) to have several lines or different host keys for the same names.
+     This will inevitably happen when short forms of host names from different
+     domains are put in the file.  It is possible that the files contain con-
+     flicting information; authentication is accepted if valid information can
+     be found from either file.
+
+     Note that the lines in these files are typically hundreds of characters
+     long, and you definitely don't want to type in the host keys by hand.
+     Rather, generate them by a script or by taking /etc/ssh/ssh_host_key.pub
+     and adding the host names at the front.
+
+     An example ssh_known_hosts file:
+
+        # Comments allowed at start of line
+        closenet,...,192.0.2.53 1024 37 159...93 closenet.example.net
+        cvs.example.net,192.0.2.10 ssh-rsa AAAA1234.....=
+        # A hashed hostname
+        |1|JfKTdBh7rNbXkVAQCRp4OQoPfmI=|USECr3SWf1JUPsms5AqfD5QfxkM= ssh-rsa
+        AAAA1234.....=
+
+FILES
+     ~/.hushlogin
+             This file is used to suppress printing the last login time and
+             /etc/motd, if PrintLastLog and PrintMotd, respectively, are en-
+             abled.  It does not suppress printing of the banner specified by
+             Banner.
+
+     ~/.rhosts
+             This file is used for host-based authentication (see ssh(1) for
+             more information).  On some machines this file may need to be
+             world-readable if the user's home directory is on an NFS parti-
+             tion, because sshd reads it as root.  Additionally, this file
+             must be owned by the user, and must not have write permissions
+             for anyone else.  The recommended permission for most machines is
+             read/write for the user, and not accessible by others.
+
+     ~/.shosts
+             This file is used in exactly the same way as .rhosts, but allows
+             host-based authentication without permitting login with
+             rlogin/rsh.
+
+     ~/.ssh/
+             This directory is the default location for all user-specific con-
+             figuration and authentication information.  There is no general
+             requirement to keep the entire contents of this directory secret,
+             but the recommended permissions are read/write/execute for the
+             user, and not accessible by others.
+
+     ~/.ssh/authorized_keys
+             Lists the public keys (RSA/DSA) that can be used for logging in
+             as this user.  The format of this file is described above.  The
+             content of the file is not highly sensitive, but the recommended
+             permissions are read/write for the user, and not accessible by
+             others.
+
+             If this file, the ~/.ssh directory, or the user's home directory
+             are writable by other users, then the file could be modified or
+             replaced by unauthorized users.  In this case, sshd will not al-
+             low it to be used unless the StrictModes option has been set to
+             ``no''.
+
+     ~/.ssh/environment
+             This file is read into the environment at login (if it exists).
+             It can only contain empty lines, comment lines (that start with
+             `#'), and assignment lines of the form name=value.  The file
+             should be writable only by the user; it need not be readable by
+             anyone else.  Environment processing is disabled by default and
+             is controlled via the PermitUserEnvironment option.
+
+     ~/.ssh/known_hosts
+             Contains a list of host keys for all hosts the user has logged
+             into that are not already in the systemwide list of known host
+             keys.  The format of this file is described above.  This file
+             should be writable only by root/the owner and can, but need not
+             be, world-readable.
+
+     ~/.ssh/rc
+             Contains initialization routines to be run before the user's home
+             directory becomes accessible.  This file should be writable only
+             by the user, and need not be readable by anyone else.
+
+     /etc/hosts.allow
+     /etc/hosts.deny
+             Access controls that should be enforced by tcp-wrappers are de-
+             fined here.  Further details are described in hosts_access(5).
+
+     /etc/hosts.equiv
+             This file is for host-based authentication (see ssh(1)).  It
+             should only be writable by root.
+
+     /etc/moduli
+             Contains Diffie-Hellman groups used for the "Diffie-Hellman Group
+             Exchange".  The file format is described in moduli(5).
+
+     /etc/motd
+             See motd(5).
+
+     /etc/nologin
+             If this file exists, sshd refuses to let anyone except root log
+             in.  The contents of the file are displayed to anyone trying to
+             log in, and non-root connections are refused.  The file should be
+             world-readable.
+
+     /etc/shosts.equiv
+             This file is used in exactly the same way as hosts.equiv, but al-
+             lows host-based authentication without permitting login with
+             rlogin/rsh.
+
+     /etc/ssh/ssh_host_key
+     /etc/ssh/ssh_host_dsa_key
+     /etc/ssh/ssh_host_rsa_key
+             These three files contain the private parts of the host keys.
+             These files should only be owned by root, readable only by root,
+             and not accessible to others.  Note that sshd does not start if
+             these files are group/world-accessible.
+
+     /etc/ssh/ssh_host_key.pub
+     /etc/ssh/ssh_host_dsa_key.pub
+     /etc/ssh/ssh_host_rsa_key.pub
+             These three files contain the public parts of the host keys.
+             These files should be world-readable but writable only by root.
+             Their contents should match the respective private parts.  These
+             files are not really used for anything; they are provided for the
+             convenience of the user so their contents can be copied to known
+             hosts files.  These files are created using ssh-keygen(1).
+
+     /etc/ssh/ssh_known_hosts
+             Systemwide list of known host keys.  This file should be prepared
+             by the system administrator to contain the public host keys of
+             all machines in the organization.  The format of this file is de-
+             scribed above.  This file should be writable only by root/the
+             owner and should be world-readable.
+
+     /etc/ssh/sshd_config
+             Contains configuration data for sshd.  The file format and con-
+             figuration options are described in sshd_config(5).
+
+     /etc/ssh/sshrc
+             Similar to ~/.ssh/rc, it can be used to specify machine-specific
+             login-time initializations globally.  This file should be
+             writable only by root, and should be world-readable.
+
+     /var/empty
+             chroot(2) directory used by sshd during privilege separation in
+             the pre-authentication phase.  The directory should not contain
+             any files and must be owned by root and not group or world-
+             writable.
+
+     /var/run/sshd.pid
+             Contains the process ID of the sshd listening for connections (if
+             there are several daemons running concurrently for different
+             ports, this contains the process ID of the one started last).
+             The content of this file is not sensitive; it can be world-read-
+             able.
+
+SEE ALSO
+     scp(1), sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1),
+     ssh-keyscan(1), chroot(2), hosts_access(5), login.conf(5), moduli(5),
+     sshd_config(5), inetd(8), sftp-server(8)
+
+AUTHORS
+     OpenSSH is a derivative of the original and free ssh 1.2.12 release by
+     Tatu Ylonen.  Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo
+     de Raadt and Dug Song removed many bugs, re-added newer features and cre-
+     ated OpenSSH.  Markus Friedl contributed the support for SSH protocol
+     versions 1.5 and 2.0.  Niels Provos and Markus Friedl contributed support
+     for privilege separation.
+
+CAVEATS
+     System security is not improved unless rshd, rlogind, and rexecd are dis-
+     abled (thus completely disabling rlogin and rsh into the machine).
+
+OpenBSD 4.6                     March 26, 2009                               9