diff options
Diffstat (limited to 'sshd_config.0')
-rw-r--r-- | sshd_config.0 | 468 |
1 files changed, 468 insertions, 0 deletions
diff --git a/sshd_config.0 b/sshd_config.0 new file mode 100644 index 000000000..7800de312 --- /dev/null +++ b/sshd_config.0 | |||
@@ -0,0 +1,468 @@ | |||
1 | SSHD_CONFIG(5) BSD File Formats Manual SSHD_CONFIG(5) | ||
2 | |||
3 | NAME | ||
4 | sshd_config - OpenSSH SSH daemon configuration file | ||
5 | |||
6 | SYNOPSIS | ||
7 | /etc/ssh/sshd_config | ||
8 | |||
9 | DESCRIPTION | ||
10 | sshd reads configuration data from /etc/ssh/sshd_config (or the file | ||
11 | specified with -f on the command line). The file contains keyword-argu- | ||
12 | ment pairs, one per line. Lines starting with M-bM-^@M-^X#M-bM-^@M-^Y and empty lines are | ||
13 | interpreted as comments. | ||
14 | |||
15 | The possible keywords and their meanings are as follows (note that key- | ||
16 | words are case-insensitive and arguments are case-sensitive): | ||
17 | |||
18 | AFSTokenPassing | ||
19 | Specifies whether an AFS token may be forwarded to the server. | ||
20 | Default is M-bM-^@M-^\noM-bM-^@M-^]. | ||
21 | |||
22 | AllowGroups | ||
23 | This keyword can be followed by a list of group name patterns, | ||
24 | separated by spaces. If specified, login is allowed only for | ||
25 | users whose primary group or supplementary group list matches one | ||
26 | of the patterns. M-bM-^@M-^X*M-bM-^@M-^Y and M-bM-^@M-^XM-bM-^@M-^Y? can be used as wildcards in the | ||
27 | patterns. Only group names are valid; a numerical group ID is | ||
28 | not recognized. By default, login is allowed for all groups. | ||
29 | |||
30 | AllowTcpForwarding | ||
31 | Specifies whether TCP forwarding is permitted. The default is | ||
32 | M-bM-^@M-^\yesM-bM-^@M-^]. Note that disabling TCP forwarding does not improve secu- | ||
33 | rity unless users are also denied shell access, as they can | ||
34 | always install their own forwarders. | ||
35 | |||
36 | AllowUsers | ||
37 | This keyword can be followed by a list of user name patterns, | ||
38 | separated by spaces. If specified, login is allowed only for | ||
39 | user names that match one of the patterns. M-bM-^@M-^X*M-bM-^@M-^Y and M-bM-^@M-^XM-bM-^@M-^Y? can be | ||
40 | used as wildcards in the patterns. Only user names are valid; a | ||
41 | numerical user ID is not recognized. By default, login is | ||
42 | allowed for all users. If the pattern takes the form USER@HOST | ||
43 | then USER and HOST are separately checked, restricting logins to | ||
44 | particular users from particular hosts. | ||
45 | |||
46 | AuthorizedKeysFile | ||
47 | Specifies the file that contains the public keys that can be used | ||
48 | for user authentication. AuthorizedKeysFile may contain tokens | ||
49 | of the form %T which are substituted during connection set-up. | ||
50 | The following tokens are defined: %% is replaced by a literal | ||
51 | M-bM-^@M-^Y%M-bM-^@M-^Y, %h is replaced by the home directory of the user being | ||
52 | authenticated and %u is replaced by the username of that user. | ||
53 | After expansion, AuthorizedKeysFile is taken to be an absolute | ||
54 | path or one relative to the userM-bM-^@M-^Ys home directory. The default | ||
55 | is M-bM-^@M-^\.ssh/authorized_keysM-bM-^@M-^]. | ||
56 | |||
57 | Banner In some jurisdictions, sending a warning message before authenti- | ||
58 | cation may be relevant for getting legal protection. The con- | ||
59 | tents of the specified file are sent to the remote user before | ||
60 | authentication is allowed. This option is only available for | ||
61 | protocol version 2. By default, no banner is displayed. | ||
62 | |||
63 | ChallengeResponseAuthentication | ||
64 | Specifies whether challenge response authentication is allowed. | ||
65 | All authentication styles from login.conf(5) are supported. The | ||
66 | default is M-bM-^@M-^\yesM-bM-^@M-^]. | ||
67 | |||
68 | Ciphers | ||
69 | Specifies the ciphers allowed for protocol version 2. Multiple | ||
70 | ciphers must be comma-separated. The default is | ||
71 | |||
72 | M-bM-^@M-^XM-bM-^@M-^Xaes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour, | ||
73 | aes192-cbc,aes256-cbcM-bM-^@M-^YM-bM-^@M-^Y | ||
74 | |||
75 | ClientAliveInterval | ||
76 | Sets a timeout interval in seconds after which if no data has | ||
77 | been received from the client, sshd will send a message through | ||
78 | the encrypted channel to request a response from the client. The | ||
79 | default is 0, indicating that these messages will not be sent to | ||
80 | the client. This option applies to protocol version 2 only. | ||
81 | |||
82 | ClientAliveCountMax | ||
83 | Sets the number of client alive messages (see above) which may be | ||
84 | sent without sshd receiving any messages back from the client. If | ||
85 | this threshold is reached while client alive messages are being | ||
86 | sent, sshd will disconnect the client, terminating the session. | ||
87 | It is important to note that the use of client alive messages is | ||
88 | very different from KeepAlive (below). The client alive messages | ||
89 | are sent through the encrypted channel and therefore will not be | ||
90 | spoofable. The TCP keepalive option enabled by KeepAlive is | ||
91 | spoofable. The client alive mechanism is valuable when the client | ||
92 | or server depend on knowing when a connection has become inac- | ||
93 | tive. | ||
94 | |||
95 | The default value is 3. If ClientAliveInterval (above) is set to | ||
96 | 15, and ClientAliveCountMax is left at the default, unresponsive | ||
97 | ssh clients will be disconnected after approximately 45 seconds. | ||
98 | |||
99 | Compression | ||
100 | Specifies whether compression is allowed. The argument must be | ||
101 | M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^]. The default is M-bM-^@M-^\yesM-bM-^@M-^]. | ||
102 | |||
103 | DenyGroups | ||
104 | This keyword can be followed by a list of group name patterns, | ||
105 | separated by spaces. Login is disallowed for users whose primary | ||
106 | group or supplementary group list matches one of the patterns. | ||
107 | M-bM-^@M-^X*M-bM-^@M-^Y and M-bM-^@M-^XM-bM-^@M-^Y? can be used as wildcards in the patterns. Only | ||
108 | group names are valid; a numerical group ID is not recognized. | ||
109 | By default, login is allowed for all groups. | ||
110 | |||
111 | DenyUsers | ||
112 | This keyword can be followed by a list of user name patterns, | ||
113 | separated by spaces. Login is disallowed for user names that | ||
114 | match one of the patterns. M-bM-^@M-^X*M-bM-^@M-^Y and M-bM-^@M-^XM-bM-^@M-^Y? can be used as wildcards | ||
115 | in the patterns. Only user names are valid; a numerical user ID | ||
116 | is not recognized. By default, login is allowed for all users. | ||
117 | If the pattern takes the form USER@HOST then USER and HOST are | ||
118 | separately checked, restricting logins to particular users from | ||
119 | particular hosts. | ||
120 | |||
121 | GatewayPorts | ||
122 | Specifies whether remote hosts are allowed to connect to ports | ||
123 | forwarded for the client. By default, sshd binds remote port | ||
124 | forwardings to the loopback address. This prevents other remote | ||
125 | hosts from connecting to forwarded ports. GatewayPorts can be | ||
126 | used to specify that sshd should bind remote port forwardings to | ||
127 | the wildcard address, thus allowing remote hosts to connect to | ||
128 | forwarded ports. The argument must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^]. The | ||
129 | default is M-bM-^@M-^\noM-bM-^@M-^]. | ||
130 | |||
131 | HostbasedAuthentication | ||
132 | Specifies whether rhosts or /etc/hosts.equiv authentication | ||
133 | together with successful public key client host authentication is | ||
134 | allowed (hostbased authentication). This option is similar to | ||
135 | RhostsRSAAuthentication and applies to protocol version 2 only. | ||
136 | The default is M-bM-^@M-^\noM-bM-^@M-^]. | ||
137 | |||
138 | HostKey | ||
139 | Specifies a file containing a private host key used by SSH. The | ||
140 | default is /etc/ssh/ssh_host_key for protocol version 1, and | ||
141 | /etc/ssh/ssh_host_rsa_key and /etc/ssh/ssh_host_dsa_key for pro- | ||
142 | tocol version 2. Note that sshd will refuse to use a file if it | ||
143 | is group/world-accessible. It is possible to have multiple host | ||
144 | key files. M-bM-^@M-^\rsa1M-bM-^@M-^] keys are used for version 1 and M-bM-^@M-^\dsaM-bM-^@M-^] or M-bM-^@M-^\rsaM-bM-^@M-^] | ||
145 | are used for version 2 of the SSH protocol. | ||
146 | |||
147 | IgnoreRhosts | ||
148 | Specifies that .rhosts and .shosts files will not be used in | ||
149 | RhostsAuthentication, RhostsRSAAuthentication or | ||
150 | HostbasedAuthentication. | ||
151 | |||
152 | /etc/hosts.equiv and /etc/shosts.equiv are still used. The | ||
153 | default is M-bM-^@M-^\yesM-bM-^@M-^]. | ||
154 | |||
155 | IgnoreUserKnownHosts | ||
156 | Specifies whether sshd should ignore the userM-bM-^@M-^Ys | ||
157 | $HOME/.ssh/known_hosts during RhostsRSAAuthentication or | ||
158 | HostbasedAuthentication. The default is M-bM-^@M-^\noM-bM-^@M-^]. | ||
159 | |||
160 | KeepAlive | ||
161 | Specifies whether the system should send TCP keepalive messages | ||
162 | to the other side. If they are sent, death of the connection or | ||
163 | crash of one of the machines will be properly noticed. However, | ||
164 | this means that connections will die if the route is down tem- | ||
165 | porarily, and some people find it annoying. On the other hand, | ||
166 | if keepalives are not sent, sessions may hang indefinitely on the | ||
167 | server, leaving M-bM-^@M-^\ghostM-bM-^@M-^] users and consuming server resources. | ||
168 | |||
169 | The default is M-bM-^@M-^\yesM-bM-^@M-^] (to send keepalives), and the server will | ||
170 | notice if the network goes down or the client host crashes. This | ||
171 | avoids infinitely hanging sessions. | ||
172 | |||
173 | To disable keepalives, the value should be set to M-bM-^@M-^\noM-bM-^@M-^]. | ||
174 | |||
175 | KerberosAuthentication | ||
176 | Specifies whether Kerberos authentication is allowed. This can | ||
177 | be in the form of a Kerberos ticket, or if PasswordAuthentication | ||
178 | is yes, the password provided by the user will be validated | ||
179 | through the Kerberos KDC. To use this option, the server needs a | ||
180 | Kerberos servtab which allows the verification of the KDCM-bM-^@M-^Ys iden- | ||
181 | tity. Default is M-bM-^@M-^\noM-bM-^@M-^]. | ||
182 | |||
183 | KerberosOrLocalPasswd | ||
184 | If set then if password authentication through Kerberos fails | ||
185 | then the password will be validated via any additional local | ||
186 | mechanism such as /etc/passwd. Default is M-bM-^@M-^\yesM-bM-^@M-^]. | ||
187 | |||
188 | KerberosTgtPassing | ||
189 | Specifies whether a Kerberos TGT may be forwarded to the server. | ||
190 | Default is M-bM-^@M-^\noM-bM-^@M-^], as this only works when the Kerberos KDC is | ||
191 | actually an AFS kaserver. | ||
192 | |||
193 | KerberosTicketCleanup | ||
194 | Specifies whether to automatically destroy the userM-bM-^@M-^Ys ticket | ||
195 | cache file on logout. Default is M-bM-^@M-^\yesM-bM-^@M-^]. | ||
196 | |||
197 | KeyRegenerationInterval | ||
198 | In protocol version 1, the ephemeral server key is automatically | ||
199 | regenerated after this many seconds (if it has been used). The | ||
200 | purpose of regeneration is to prevent decrypting captured ses- | ||
201 | sions by later breaking into the machine and stealing the keys. | ||
202 | The key is never stored anywhere. If the value is 0, the key is | ||
203 | never regenerated. The default is 3600 (seconds). | ||
204 | |||
205 | ListenAddress | ||
206 | Specifies the local addresses sshd should listen on. The follow- | ||
207 | ing forms may be used: | ||
208 | |||
209 | ListenAddress host|IPv4_addr|IPv6_addr | ||
210 | ListenAddress host|IPv4_addr:port | ||
211 | ListenAddress [host|IPv6_addr]:port | ||
212 | |||
213 | If port is not specified, sshd will listen on the address and all | ||
214 | prior Port options specified. The default is to listen on all | ||
215 | local addresses. Multiple ListenAddress options are permitted. | ||
216 | Additionally, any Port options must precede this option for non | ||
217 | port qualified addresses. | ||
218 | |||
219 | LoginGraceTime | ||
220 | The server disconnects after this time if the user has not suc- | ||
221 | cessfully logged in. If the value is 0, there is no time limit. | ||
222 | The default is 120 seconds. | ||
223 | |||
224 | LogLevel | ||
225 | Gives the verbosity level that is used when logging messages from | ||
226 | sshd. The possible values are: QUIET, FATAL, ERROR, INFO, VER- | ||
227 | BOSE, DEBUG, DEBUG1, DEBUG2 and DEBUG3. The default is INFO. | ||
228 | DEBUG and DEBUG1 are equivalent. DEBUG2 and DEBUG3 each specify | ||
229 | higher levels of debugging output. Logging with a DEBUG level | ||
230 | violates the privacy of users and is not recommended. | ||
231 | |||
232 | MACs Specifies the available MAC (message authentication code) algo- | ||
233 | rithms. The MAC algorithm is used in protocol version 2 for data | ||
234 | integrity protection. Multiple algorithms must be comma-sepa- | ||
235 | rated. The default is | ||
236 | M-bM-^@M-^\hmac-md5,hmac-sha1,hmac-ripemd160,hmac-sha1-96,hmac-md5-96M-bM-^@M-^]. | ||
237 | |||
238 | MaxStartups | ||
239 | Specifies the maximum number of concurrent unauthenticated con- | ||
240 | nections to the sshd daemon. Additional connections will be | ||
241 | dropped until authentication succeeds or the LoginGraceTime | ||
242 | expires for a connection. The default is 10. | ||
243 | |||
244 | Alternatively, random early drop can be enabled by specifying the | ||
245 | three colon separated values M-bM-^@M-^\start:rate:fullM-bM-^@M-^] (e.g., | ||
246 | "10:30:60"). sshd will refuse connection attempts with a proba- | ||
247 | bility of M-bM-^@M-^\rate/100M-bM-^@M-^] (30%) if there are currently M-bM-^@M-^\startM-bM-^@M-^] (10) | ||
248 | unauthenticated connections. The probability increases linearly | ||
249 | and all connection attempts are refused if the number of unau- | ||
250 | thenticated connections reaches M-bM-^@M-^\fullM-bM-^@M-^] (60). | ||
251 | |||
252 | PAMAuthenticationViaKbdInt | ||
253 | Specifies whether PAM challenge response authentication is | ||
254 | allowed. This allows the use of most PAM challenge response | ||
255 | authentication modules, but it will allow password authentication | ||
256 | regardless of whether PasswordAuthentication is enabled. | ||
257 | |||
258 | PasswordAuthentication | ||
259 | Specifies whether password authentication is allowed. The | ||
260 | default is M-bM-^@M-^\yesM-bM-^@M-^]. | ||
261 | |||
262 | PermitEmptyPasswords | ||
263 | When password authentication is allowed, it specifies whether the | ||
264 | server allows login to accounts with empty password strings. The | ||
265 | default is M-bM-^@M-^\noM-bM-^@M-^]. | ||
266 | |||
267 | PermitRootLogin | ||
268 | Specifies whether root can login using ssh(1). The argument must | ||
269 | be M-bM-^@M-^\yesM-bM-^@M-^], M-bM-^@M-^\without-passwordM-bM-^@M-^], M-bM-^@M-^\forced-commands-onlyM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^]. | ||
270 | The default is M-bM-^@M-^\yesM-bM-^@M-^]. | ||
271 | |||
272 | If this option is set to M-bM-^@M-^\without-passwordM-bM-^@M-^] password authentica- | ||
273 | tion is disabled for root. | ||
274 | |||
275 | If this option is set to M-bM-^@M-^\forced-commands-onlyM-bM-^@M-^] root login with | ||
276 | public key authentication will be allowed, but only if the | ||
277 | command option has been specified (which may be useful for taking | ||
278 | remote backups even if root login is normally not allowed). All | ||
279 | other authentication methods are disabled for root. | ||
280 | |||
281 | If this option is set to M-bM-^@M-^\noM-bM-^@M-^] root is not allowed to login. | ||
282 | |||
283 | PermitUserEnvironment | ||
284 | Specifies whether ~/.ssh/environment and environment= options in | ||
285 | ~/.ssh/authorized_keys are processed by sshd. The default is | ||
286 | M-bM-^@M-^\noM-bM-^@M-^]. Enabling environment processing may enable users to bypass | ||
287 | access restrictions in some configurations using mechanisms such | ||
288 | as LD_PRELOAD. | ||
289 | |||
290 | PidFile | ||
291 | Specifies the file that contains the process ID of the sshd dae- | ||
292 | mon. The default is /var/run/sshd.pid. | ||
293 | |||
294 | Port Specifies the port number that sshd listens on. The default is | ||
295 | 22. Multiple options of this type are permitted. See also | ||
296 | ListenAddress. | ||
297 | |||
298 | PrintLastLog | ||
299 | Specifies whether sshd should print the date and time when the | ||
300 | user last logged in. The default is M-bM-^@M-^\yesM-bM-^@M-^]. | ||
301 | |||
302 | PrintMotd | ||
303 | Specifies whether sshd should print /etc/motd when a user logs in | ||
304 | interactively. (On some systems it is also printed by the shell, | ||
305 | /etc/profile, or equivalent.) The default is M-bM-^@M-^\yesM-bM-^@M-^]. | ||
306 | |||
307 | Protocol | ||
308 | Specifies the protocol versions sshd supports. The possible val- | ||
309 | ues are M-bM-^@M-^\1M-bM-^@M-^] and M-bM-^@M-^\2M-bM-^@M-^]. Multiple versions must be comma-separated. | ||
310 | The default is M-bM-^@M-^\2,1M-bM-^@M-^]. Note that the order of the protocol list | ||
311 | does not indicate preference, because the client selects among | ||
312 | multiple protocol versions offered by the server. Specifying | ||
313 | M-bM-^@M-^\2,1M-bM-^@M-^] is identical to M-bM-^@M-^\1,2M-bM-^@M-^]. | ||
314 | |||
315 | PubkeyAuthentication | ||
316 | Specifies whether public key authentication is allowed. The | ||
317 | default is M-bM-^@M-^\yesM-bM-^@M-^]. Note that this option applies to protocol ver- | ||
318 | sion 2 only. | ||
319 | |||
320 | RhostsAuthentication | ||
321 | Specifies whether authentication using rhosts or /etc/hosts.equiv | ||
322 | files is sufficient. Normally, this method should not be permit- | ||
323 | ted because it is insecure. RhostsRSAAuthentication should be | ||
324 | used instead, because it performs RSA-based host authentication | ||
325 | in addition to normal rhosts or /etc/hosts.equiv authentication. | ||
326 | The default is M-bM-^@M-^\noM-bM-^@M-^]. This option applies to protocol version 1 | ||
327 | only. | ||
328 | |||
329 | RhostsRSAAuthentication | ||
330 | Specifies whether rhosts or /etc/hosts.equiv authentication | ||
331 | together with successful RSA host authentication is allowed. The | ||
332 | default is M-bM-^@M-^\noM-bM-^@M-^]. This option applies to protocol version 1 only. | ||
333 | |||
334 | RSAAuthentication | ||
335 | Specifies whether pure RSA authentication is allowed. The | ||
336 | default is M-bM-^@M-^\yesM-bM-^@M-^]. This option applies to protocol version 1 | ||
337 | only. | ||
338 | |||
339 | ServerKeyBits | ||
340 | Defines the number of bits in the ephemeral protocol version 1 | ||
341 | server key. The minimum value is 512, and the default is 768. | ||
342 | |||
343 | StrictModes | ||
344 | Specifies whether sshd should check file modes and ownership of | ||
345 | the userM-bM-^@M-^Ys files and home directory before accepting login. This | ||
346 | is normally desirable because novices sometimes accidentally | ||
347 | leave their directory or files world-writable. The default is | ||
348 | M-bM-^@M-^\yesM-bM-^@M-^]. | ||
349 | |||
350 | Subsystem | ||
351 | Configures an external subsystem (e.g., file transfer daemon). | ||
352 | Arguments should be a subsystem name and a command to execute | ||
353 | upon subsystem request. The command sftp-server(8) implements | ||
354 | the M-bM-^@M-^\sftpM-bM-^@M-^] file transfer subsystem. By default no subsystems are | ||
355 | defined. Note that this option applies to protocol version 2 | ||
356 | only. | ||
357 | |||
358 | SyslogFacility | ||
359 | Gives the facility code that is used when logging messages from | ||
360 | sshd. The possible values are: DAEMON, USER, AUTH, LOCAL0, | ||
361 | LOCAL1, LOCAL2, LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7. The | ||
362 | default is AUTH. | ||
363 | |||
364 | UseLogin | ||
365 | Specifies whether login(1) is used for interactive login ses- | ||
366 | sions. The default is M-bM-^@M-^\noM-bM-^@M-^]. Note that login(1) is never used | ||
367 | for remote command execution. Note also, that if this is | ||
368 | enabled, X11Forwarding will be disabled because login(1) does not | ||
369 | know how to handle xauth(1) cookies. If UsePrivilegeSeparation | ||
370 | is specified, it will be disabled after authentication. | ||
371 | |||
372 | UsePrivilegeSeparation | ||
373 | Specifies whether sshd separates privileges by creating an | ||
374 | unprivileged child process to deal with incoming network traffic. | ||
375 | After successful authentication, another process will be created | ||
376 | that has the privilege of the authenticated user. The goal of | ||
377 | privilege separation is to prevent privilege escalation by con- | ||
378 | taining any corruption within the unprivileged processes. The | ||
379 | default is M-bM-^@M-^\yesM-bM-^@M-^]. | ||
380 | |||
381 | VerifyReverseMapping | ||
382 | Specifies whether sshd should try to verify the remote host name | ||
383 | and check that the resolved host name for the remote IP address | ||
384 | maps back to the very same IP address. The default is M-bM-^@M-^\noM-bM-^@M-^]. | ||
385 | |||
386 | X11DisplayOffset | ||
387 | Specifies the first display number available for sshdM-bM-^@M-^Ys X11 for- | ||
388 | warding. This prevents sshd from interfering with real X11 | ||
389 | servers. The default is 10. | ||
390 | |||
391 | X11Forwarding | ||
392 | Specifies whether X11 forwarding is permitted. The argument must | ||
393 | be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^]. The default is M-bM-^@M-^\noM-bM-^@M-^]. | ||
394 | |||
395 | When X11 forwarding is enabled, there may be additional exposure | ||
396 | to the server and to client displays if the sshd proxy display is | ||
397 | configured to listen on the wildcard address (see X11UseLocalhost | ||
398 | below), however this is not the default. Additionally, the | ||
399 | authentication spoofing and authentication data verification and | ||
400 | substitution occur on the client side. The security risk of | ||
401 | using X11 forwarding is that the clientM-bM-^@M-^Ys X11 display server may | ||
402 | be exposed to attack when the ssh client requests forwarding (see | ||
403 | the warnings for ForwardX11 in ssh_config(5) ). A system adminis- | ||
404 | trator may have a stance in which they want to protect clients | ||
405 | that may expose themselves to attack by unwittingly requesting | ||
406 | X11 forwarding, which can warrant a M-bM-^@M-^\noM-bM-^@M-^] setting. | ||
407 | |||
408 | Note that disabling X11 forwarding does not prevent users from | ||
409 | forwarding X11 traffic, as users can always install their own | ||
410 | forwarders. X11 forwarding is automatically disabled if UseLogin | ||
411 | is enabled. | ||
412 | |||
413 | X11UseLocalhost | ||
414 | Specifies whether sshd should bind the X11 forwarding server to | ||
415 | the loopback address or to the wildcard address. By default, | ||
416 | sshd binds the forwarding server to the loopback address and sets | ||
417 | the hostname part of the DISPLAY environment variable to | ||
418 | M-bM-^@M-^\localhostM-bM-^@M-^]. This prevents remote hosts from connecting to the | ||
419 | proxy display. However, some older X11 clients may not function | ||
420 | with this configuration. X11UseLocalhost may be set to M-bM-^@M-^\noM-bM-^@M-^] to | ||
421 | specify that the forwarding server should be bound to the wild- | ||
422 | card address. The argument must be M-bM-^@M-^\yesM-bM-^@M-^] or M-bM-^@M-^\noM-bM-^@M-^]. The default | ||
423 | is M-bM-^@M-^\yesM-bM-^@M-^]. | ||
424 | |||
425 | XAuthLocation | ||
426 | Specifies the full pathname of the xauth(1) program. The default | ||
427 | is /usr/X11R6/bin/xauth. | ||
428 | |||
429 | Time Formats | ||
430 | sshd command-line arguments and configuration file options that specify | ||
431 | time may be expressed using a sequence of the form: time[qualifier], | ||
432 | where time is a positive integer value and qualifier is one of the fol- | ||
433 | lowing: | ||
434 | |||
435 | <none> seconds | ||
436 | s | S seconds | ||
437 | m | M minutes | ||
438 | h | H hours | ||
439 | d | D days | ||
440 | w | W weeks | ||
441 | |||
442 | Each member of the sequence is added together to calculate the total time | ||
443 | value. | ||
444 | |||
445 | Time format examples: | ||
446 | |||
447 | 600 600 seconds (10 minutes) | ||
448 | 10m 10 minutes | ||
449 | 1h30m 1 hour 30 minutes (90 minutes) | ||
450 | |||
451 | FILES | ||
452 | /etc/ssh/sshd_config | ||
453 | Contains configuration data for sshd. This file should be | ||
454 | writable by root only, but it is recommended (though not neces- | ||
455 | sary) that it be world-readable. | ||
456 | |||
457 | AUTHORS | ||
458 | OpenSSH is a derivative of the original and free ssh 1.2.12 release by | ||
459 | Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo | ||
460 | de Raadt and Dug Song removed many bugs, re-added newer features and cre- | ||
461 | ated OpenSSH. Markus Friedl contributed the support for SSH protocol | ||
462 | versions 1.5 and 2.0. Niels Provos and Markus Friedl contributed support | ||
463 | for privilege separation. | ||
464 | |||
465 | SEE ALSO | ||
466 | sshd(8) | ||
467 | |||
468 | BSD September 25, 1999 BSD | ||