| Age | Commit message (Collapse) | Author |
|---|
|
openbsd-compat/openbsd-compat.h openbsd-compat/strptime.c] Add strptime to
the compat library which helps on platforms like old IRIX. Based on work
by djm, tested by Tom Christensen.
|
|
|
|
regress/test-exec.sh] Under certain conditions when testing with sudo
tests would fail because the pidfile could not be read by a regular user.
"cat: cannot open ...../regress/pidfile: Permission denied (error 13)"
Make sure cat is run by $SUDO. no objection from me. djm@
|
|
based in part on a patch from Colin Watson, ok djm@
|
|
already set. Makes FreeBSD user openable tunnels useful; patch from
richard.burakowski+ossh AT mrburak.net, ok dtucker@
|
|
[contrib/suse/openssh.spec] Crank version numbers
|
|
- djm@cvs.openbsd.org 2010/08/08 16:26:42
[version.h]
crank to 5.6
|
|
|
|
[channels.c]
Fix a trio of bugs in the local/remote window calculation for datagram
data channels (i.e. TunnelForward):
Calculate local_consumed correctly in channel_handle_wfd() by measuring
the delta to buffer_len(c->output) from when we start to when we finish.
The proximal problem here is that the output_filter we use in portable
modified the length of the dequeued datagram (to futz with the headers
for !OpenBSD).
In channel_output_poll(), don't enqueue datagrams that won't fit in the
peer's advertised packet size (highly unlikely to ever occur) or which
won't fit in the peer's remaining window (more likely).
In channel_input_data(), account for the 4-byte string header in
datagram packets that we accept from the peer and enqueue in c->output.
report, analysis and testing 2/3 cases from wierbows AT us.ibm.com;
"looks good" markus@
|
|
[ssh-keysign.c]
clean for -Wuninitialized (Id sync only; portable had this change)
|
|
[ssh-keygen.1 ssh-keygen.c]
Support CA keys in PKCS#11 tokens; feedback and ok markus@
|
|
[authfile.c]
commited the wrong version of the hostbased certificate diff; this
version replaces some strlc{py,at} verbosity with xasprintf() at
the request of markus@
|
|
[auth.c auth2-hostbased.c authfile.c authfile.h ssh-keysign.8]
[ssh-keysign.c ssh.c]
enable certificates for hostbased authentication, from Iain Morgan;
"looks ok" markus@
|
|
[PROTOCOL.certkeys ssh-keygen.c]
tighten the rules for certificate encoding by requiring that options
appear in lexical order and make our ssh-keygen comply. ok markus@
|
|
[ssh.1 ssh_config.5 sshd.8]
Remove mentions of weird "addr/port" alternate address format for IPv6
addresses combinations. It hasn't worked for ages and we have supported
the more commen "[addr]:port" format for a long time. ok jmc@ markus@
|
|
[ssh.1]
Ciphers is documented in ssh_config(5) these days
|
|
[misc.c]
sync timingsafe_bcmp() with the one dempsky@ committed to sys/lib/libkern
|
|
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5]
add a "ControlPersist" option that automatically starts a background
ssh(1) multiplex master when connecting. This connection can stay alive
indefinitely, or can be set to automatically close after a user-specified
duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but
further hacked on by wmertens AT cisco.com, apb AT cequrux.com,
martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
|
|
[sftp-client.c]
bz#1797: fix swapped args in upload_dir_internal(), breaking recursive
upload depth checks and causing verbose printing of transfers to always
be turned on; patch from imorgan AT nas.nasa.gov
|
|
[ssh-rsa.c]
more timing paranoia - compare all parts of the expected decrypted
data before returning. AFAIK not exploitable in the SSH protocol.
"groovy" deraadt@
|
|
- djm@cvs.openbsd.org 2010/07/16 04:45:30
[ssh-keygen.c]
avoid bogus compiler warning
|
|
PAM to sane values in case the PAM method doesn't write to them. Spotted by
Bitman Zhou, ok djm@.
|
|
details about its behaviour WRT existing directories. Patch from
asguthrie at gmail com, ok djm.
|
|
[ssh-keygen.1]
repair incorrect block nesting, which screwed up indentation;
problem reported and fix OK by jmc@
|
|
[ssh.1]
finally ssh synopsis looks nice again! this commit just removes a ton of
hacks we had in place to make it work with old groff;
|
|
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c packet.c]
[ssh-rsa.c]
s/timing_safe_cmp/timingsafe_bcmp/g
|
|
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c]
[packet.c ssh-rsa.c]
implement a timing_safe_cmp() function to compare memory without leaking
timing information by short-circuiting like memcmp() and use it for
some of the more sensitive comparisons (though nothing high-value was
readily attackable anyway); "looks ok" markus@
|
|
[ssh.c ssh_config.5]
expand %h to the hostname in ssh_config Hostname options. While this
sounds useless, it is actually handy for working with unqualified
hostnames:
Host *.*
Hostname %h
Host *
Hostname %h.example.org
"I like it" markus@
|
|
[ssh.c]
Make ExitOnForwardFailure work with fork-after-authentication ("ssh -f")
for protocol 2. ok markus@
|
|
[misc.c]
unbreak strdelim() skipping past quoted strings, e.g.
AllowUsers "blah blah" blah
was broken; report and fix in bz#1757 from bitman.zhou AT centrify.com
ok dtucker;
|
|
(line 77) should have been for no_x11_askpass.
|
|
[cert-userkey.sh]
regress tests for key options in AuthorizedPrincipals
|
|
[Makefile]
fix how we run the tests so we can successfully use SUDO='sudo -E'
in our env
|
|
[scp.c]
Fix a longstanding problem where if you suspend scp at the
password/passphrase prompt the terminal mode is not restored.
OK djm@
|
|
[sshd_config.5]
tweak previous;
|
|
[ssh-keygen.c]
sort usage();
|
|
[ssh-keygen.1]
tweak previous;
|
|
[auth2-pubkey.c sshd_config.5]
allow key options (command="..." and friends) in AuthorizedPrincipals;
ok markus@
|
|
[ssh-keygen.1 ssh-keygen.c]
allow import (-i) and export (-e) of PEM and PKCS#8 encoded keys;
bz#1749; ok markus@
|
|
[ssh.c]
oops, forgot to #include <canohost.h>; spotted and patch from chl@
|
|
[ssh_config.5]
tweak previous;
|
|
key.h.
|
|
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
|
|
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
|
|
[auth1.c auth2-none.c]
skip the initial check for access with an empty password when
PermitEmptyPasswords=no; bz#1638; ok markus@
|
|
[channels.c session.c]
bz#1750: fix requirement for /dev/null inside ChrootDirectory for
internal-sftp accidentally introduced in r1.253 by removing the code
that opens and dup /dev/null to stderr and modifying the channels code
to read stderr but discard it instead; ok markus@
|
|
[channels.c mux.c readconf.c readconf.h ssh.h]
bz#1327: remove hardcoded limit of 100 permitopen clauses and port
forwards per direction; ok markus@ stevesk@
|
|
[ssh-keygen.c]
fix printing of extensions in v01 certificates that I broke in r1.190
|
|
[session.c]
include the user name on "subsystem request for ..." log messages;
bz#1571; ok dtucker@
|
|
[ssh-keyscan.c]
replace verbose and overflow-prone Linebuf code with read_keyfile_line()
based on patch from joachim AT joachimschipper.nl; bz#1565; ok dtucker@
|
