summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-08-30releasing package openssh version 1:7.8p1-1Colin Watson
2018-08-30Work around conch interoperability failureColin Watson
Twisted Conch fails to read private keys in the new format (https://twistedmatrix.com/trac/ticket/9515). Work around this until it can be fixed in Twisted.
2018-08-30Work around conch interoperability failureColin Watson
Twisted Conch fails to read private keys in the new format (https://twistedmatrix.com/trac/ticket/9515). Work around this until it can be fixed in Twisted. Forwarded: not-needed Last-Update: 2018-08-30 Patch-Name: conch-old-privkey-format.patch
2018-08-30New upstream release (7.8p1)Colin Watson
Closes: #907534
2018-08-24Enable specific ioctl call for EP11 crypto card (s390)Eduardo Barretto
The EP11 crypto card needs to make an ioctl call, which receives an specific argument. This crypto card is for s390 only. Signed-off-by: Eduardo Barretto <ebarretto@linux.vnet.ibm.com> Origin: other, https://bugzilla.mindrot.org/show_bug.cgi?id=2752 Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=2752 Bug-Ubuntu: https://bugs.launchpad.net/bugs/1686618 Last-Update: 2017-08-28 Patch-Name: seccomp-s390-ioctl-ep11-crypto.patch
2018-08-24Allow flock and ipc syscall for s390 architectureEduardo Barretto
In order to use the OpenSSL-ibmpkcs11 engine it is needed to allow flock and ipc calls, because this engine calls OpenCryptoki (a PKCS#11 implementation) which calls the libraries that will communicate with the crypto cards. OpenCryptoki makes use of flock and ipc and, as of now, this is only need on s390 architecture. Signed-off-by: Eduardo Barretto <ebarretto@linux.vnet.ibm.com> Origin: other, https://bugzilla.mindrot.org/show_bug.cgi?id=2752 Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=2752 Bug-Ubuntu: https://bugs.launchpad.net/bugs/1686618 Last-Update: 2018-08-24 Patch-Name: seccomp-s390-flock-ipc.patch
2018-08-24Restore reading authorized_keys2 by defaultColin Watson
Upstream seems to intend to gradually phase this out, so don't assume that this will remain the default forever. However, we were late in adopting the upstream sshd_config changes, so it makes sense to extend the grace period. Bug-Debian: https://bugs.debian.org/852320 Forwarded: not-needed Last-Update: 2017-03-05 Patch-Name: restore-authorized_keys2.patch
2018-08-24Various Debian-specific configuration changesColin Watson
ssh: Enable ForwardX11Trusted, returning to earlier semantics which cause fewer problems with existing setups (http://bugs.debian.org/237021). ssh: Set 'SendEnv LANG LC_*' by default (http://bugs.debian.org/264024). ssh: Enable HashKnownHosts by default to try to limit the spread of ssh worms. ssh: Enable GSSAPIAuthentication by default. sshd: Enable PAM, disable ChallengeResponseAuthentication, and disable PrintMotd. sshd: Enable X11Forwarding. sshd: Set 'AcceptEnv LANG LC_*' by default. sshd: Change sftp subsystem path to /usr/lib/openssh/sftp-server. Document all of this. Author: Russ Allbery <rra@debian.org> Forwarded: not-needed Last-Update: 2017-10-04 Patch-Name: debian-config.patch
2018-08-24Add systemd readiness notification supportMichael Biebl
Bug-Debian: https://bugs.debian.org/778913 Forwarded: no Last-Update: 2017-08-22 Patch-Name: systemd-readiness.patch
2018-08-24Give the ssh-askpass-gnome window a default iconVincent Untz
Bug-Ubuntu: https://bugs.launchpad.net/bugs/27152 Last-Update: 2010-02-28 Patch-Name: gnome-ssh-askpass2-icon.patch
2018-08-24Don't check the status field of the OpenSSL versionKurt Roeckx
There is no reason to check the version of OpenSSL (in Debian). If it's not compatible the soname will change. OpenSSH seems to want to do a check for the soname based on the version number, but wants to keep the status of the release the same. Remove that check on the status since it doesn't tell you anything about how compatible that version is. Author: Colin Watson <cjwatson@debian.org> Bug-Debian: https://bugs.debian.org/93581 Bug-Debian: https://bugs.debian.org/664383 Bug-Debian: https://bugs.debian.org/732940 Forwarded: not-needed Last-Update: 2014-10-07 Patch-Name: no-openssl-version-status.patch
2018-08-24Document consequences of ssh-agent being setgid in ssh-agent(1)Colin Watson
Bug-Debian: http://bugs.debian.org/711623 Forwarded: no Last-Update: 2013-06-08 Patch-Name: ssh-agent-setgid.patch
2018-08-24Document that HashKnownHosts may break tab-completionColin Watson
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1727 Bug-Debian: http://bugs.debian.org/430154 Last-Update: 2013-09-14 Patch-Name: doc-hash-tab-completion.patch
2018-08-24ssh(1): Refer to ssh-argv0(1)Colin Watson
Old versions of OpenSSH (up to 2.5 or thereabouts) allowed creating symlinks to ssh with the name of the host you want to connect to. Debian ships an ssh-argv0 script restoring this feature; this patch refers to its manual page from ssh(1). Bug-Debian: http://bugs.debian.org/111341 Forwarded: not-needed Last-Update: 2013-09-14 Patch-Name: ssh-argv0.patch
2018-08-24Adjust various OpenBSD-specific references in manual pagesColin Watson
No single bug reference for this patch, but history includes: http://bugs.debian.org/154434 (login.conf(5)) http://bugs.debian.org/513417 (/etc/rc) http://bugs.debian.org/530692 (ssl(8)) https://bugs.launchpad.net/bugs/456660 (ssl(8)) Forwarded: not-needed Last-Update: 2017-10-04 Patch-Name: openbsd-docs.patch
2018-08-24Install authorized_keys(5) as a symlink to sshd(8)Tomas Pospisek
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1720 Bug-Debian: http://bugs.debian.org/441817 Last-Update: 2013-09-14 Patch-Name: authorized-keys-man-symlink.patch
2018-08-24Add DebianBanner server configuration optionKees Cook
Setting this to "no" causes sshd to omit the Debian revision from its initial protocol handshake, for those scared by package-versioning.patch. Bug-Debian: http://bugs.debian.org/562048 Forwarded: not-needed Last-Update: 2018-08-24 Patch-Name: debian-banner.patch
2018-08-24Include the Debian version in our identificationMatthew Vernon
This makes it easier to audit networks for versions patched against security vulnerabilities. It has little detrimental effect, as attackers will generally just try attacks rather than bothering to scan for vulnerable-looking version strings. (However, see debian-banner.patch.) Forwarded: not-needed Last-Update: 2017-10-04 Patch-Name: package-versioning.patch
2018-08-24Mention ssh-keygen in ssh fingerprint changed warningScott Moser
Author: Chris Lamb <lamby@debian.org> Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1843 Bug-Ubuntu: https://bugs.launchpad.net/bugs/686607 Last-Update: 2017-08-22 Patch-Name: mention-ssh-keygen-on-keychange.patch
2018-08-24Force use of DNSSEC even if "options edns0" isn't in resolv.confColin Watson
This allows SSHFP DNS records to be verified if glibc 2.11 is installed. Origin: vendor, https://cvs.fedoraproject.org/viewvc/F-12/openssh/openssh-5.2p1-edns.patch?revision=1.1&view=markup Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=572049 Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=572049 Last-Update: 2010-04-06 Patch-Name: dnssec-sshfp.patch
2018-08-24Look for $SHELL on the path for ProxyCommand/LocalCommandColin Watson
There's some debate on the upstream bug about whether POSIX requires this. I (Colin Watson) agree with Vincent and think it does. Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1494 Bug-Debian: http://bugs.debian.org/492728 Last-Update: 2013-09-14 Patch-Name: shell-path.patch
2018-08-24Adjust scp quoting in verbose modeNicolas Valcárcel
Tweak scp's reporting of filenames in verbose mode to be a bit less confusing with spaces. This should be revised to mimic real shell quoting. Bug-Ubuntu: https://bugs.launchpad.net/bugs/89945 Last-Update: 2010-02-27 Patch-Name: scp-quoting.patch
2018-08-24Allow harmless group-writabilityColin Watson
Allow secure files (~/.ssh/config, ~/.ssh/authorized_keys, etc.) to be group-writable, provided that the group in question contains only the file's owner. Rejected upstream for IMO incorrect reasons (e.g. a misunderstanding about the contents of gr->gr_mem). Given that per-user groups and umask 002 are the default setup in Debian (for good reasons - this makes operating in setgid directories with other groups much easier), we need to permit this by default. Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1060 Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=314347 Last-Update: 2017-10-04 Patch-Name: user-group-modes.patch
2018-08-24"LogLevel SILENT" compatibilityJonathan David Amery
"LogLevel SILENT" (-qq) was introduced in Debian openssh 1:3.0.1p1-1 to match the behaviour of non-free SSH, in which -q does not suppress fatal errors. However, this was unintentionally broken in 1:4.6p1-2 and nobody complained, so we've dropped most of it. The parts that remain are basic configuration file compatibility, and an adjustment to "Pseudo-terminal will not be allocated ..." which should be split out into a separate patch. Author: Matthew Vernon <matthew@debian.org> Author: Colin Watson <cjwatson@debian.org> Last-Update: 2013-09-14 Patch-Name: syslog-level-silent.patch
2018-08-24Various keepalive extensionsRichard Kettlewell
Add compatibility aliases for ProtocolKeepAlives and SetupTimeOut, supported in previous versions of Debian's OpenSSH package but since superseded by ServerAliveInterval. (We're probably stuck with this bit for compatibility.) In batch mode, default ServerAliveInterval to five minutes. Adjust documentation to match and to give some more advice on use of keepalives. Author: Ian Jackson <ian@chiark.greenend.org.uk> Author: Matthew Vernon <matthew@debian.org> Author: Colin Watson <cjwatson@debian.org> Last-Update: 2018-08-24 Patch-Name: keepalive-extensions.patch
2018-08-24Accept obsolete ssh-vulnkey configuration optionsColin Watson
These options were used as part of Debian's response to CVE-2008-0166. Nearly six years later, we no longer need to continue carrying the bulk of that patch, but we do need to avoid failing when the associated configuration options are still present. Last-Update: 2014-02-09 Patch-Name: ssh-vulnkey-compat.patch
2018-08-24Handle SELinux authorisation rolesManoj Srivastava
Rejected upstream due to discomfort with magic usernames; a better approach will need an SSH protocol change. In the meantime, this came from Debian's SELinux maintainer, so we'll keep it until we have something better. Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1641 Bug-Debian: http://bugs.debian.org/394795 Last-Update: 2018-08-24 Patch-Name: selinux-role.patch
2018-08-24Restore TCP wrappers supportColin Watson
Support for TCP wrappers was dropped in OpenSSH 6.7. See this message and thread: https://lists.mindrot.org/pipermail/openssh-unix-dev/2014-April/032497.html It is true that this reduces preauth attack surface in sshd. On the other hand, this support seems to be quite widely used, and abruptly dropping it (from the perspective of users who don't read openssh-unix-dev) could easily cause more serious problems in practice. It's not entirely clear what the right long-term answer for Debian is, but it at least probably doesn't involve dropping this feature shortly before a freeze. Forwarded: not-needed Last-Update: 2018-08-24 Patch-Name: restore-tcp-wrappers.patch
2018-08-24GSSAPI key exchange supportSimon Wilkinson
This patch has been rejected upstream: "None of the OpenSSH developers are in favour of adding this, and this situation has not changed for several years. This is not a slight on Simon's patch, which is of fine quality, but just that a) we don't trust GSSAPI implementations that much and b) we don't like adding new KEX since they are pre-auth attack surface. This one is particularly scary, since it requires hooks out to typically root-owned system resources." However, quite a lot of people rely on this in Debian, and it's better to have it merged into the main openssh package rather than having separate -krb5 packages (as we used to have). It seems to have a generally good security history. Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1242 Last-Updated: 2018-08-24 Patch-Name: gssapi.patch
2018-08-24Import openssh_7.8p1.orig.tar.gzColin Watson
2018-08-24Switch debian/watch to HTTPS.Colin Watson
2018-08-23shorten temporary SSH_REGRESS_TMP pathDamien Miller
Previous path was exceeding max socket length on at least one platform (OSX)
2018-08-23rebuild dependenciesDamien Miller
2018-08-23fix path in distclean targetDamien Miller
Patch from Jakub Jelen
2018-08-23upstream: memleak introduced in r1.83; from Colin Watsondjm@openbsd.org
OpenBSD-Commit-ID: 5c019104c280cbd549a264a7217b67665e5732dc
2018-08-22upstream: AIX reports the CODESET as "ISO8859-1" in the POSIX locale.schwarze@openbsd.org
Treating that as a safe encoding is OK because even when other systems return that string for real ISO8859-1, it is still safe in the sense that it is ASCII-compatible and stateless. Issue reported by Val dot Baranov at duke dot edu. Additional information provided by Michael dot Felt at felt dot demon dot nl. Tested by Michael Felt on AIX 6.1 and by Val Baranov on AIX 7.1. Tweak and OK djm@. OpenBSD-Commit-ID: 36f1210e0b229817d10eb490d6038f507b8256a7
2018-08-21 modified: openbsd-compat/port-uw.cTim Rice
remove obsolete and un-needed include
2018-08-20Missing unistd.h for regress/mkdtemp.cDamien Miller
2018-08-18Retroactively mention CVE-2018-15473 in changelogColin Watson
2018-08-17releasing package openssh version 1:7.7p1-4Colin Watson
2018-08-17Fix user enumeration vulnerabilityColin Watson
Apply upstream patch to delay bailout for invalid authenticating user until after the packet containing the request has been fully parsed. Closes: #906236
2018-08-17upstream: delay bailout for invalid authenticating userdjm@openbsd.org
... until after the packet containing the request has been fully parsed. Reported by Dariusz Tytko and Michał Sajdak; ok deraadt OpenBSD-Commit-ID: b4891882fbe413f230fe8ac8a37349b03bd0b70d Origin: backport, http://anongit.mindrot.org/openssh.git/commit/?id=74287f5df9966a0648b4a68417451dd18f079ab8 Bug-Debian: https://bugs.debian.org/906236 Last-Update: 2018-08-17 Patch-Name: upstream-delay-bailout-for-invalid-authenticating-user.patch
2018-08-17update version numbers in anticipation of releaseDamien Miller
2018-08-13configure: work around GCC shortcoming on CygwinCorinna Vinschen
Cygwin's latest 7.x GCC allows to specify -mfunction-return=thunk as well as -mindirect-branch=thunk on the command line, albeit producing invalid code, leading to an error at link stage. The check in configure.ac only checks if the option is present, but not if it produces valid code. This patch fixes it by special-casing Cygwin. Another solution may be to change these to linker checks. Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
2018-08-13cygwin: add missing stdarg.h includeCorinna Vinschen
Further header file standarization in Cygwin uncovered a lazy indirect include in bsd-cygwin_util.c Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
2018-08-13upstream: revert compat.[ch] section of the following change. Itdjm@openbsd.org
causes double-free under some circumstances. -- date: 2018/07/31 03:07:24; author: djm; state: Exp; lines: +33 -18; commitid: f7g4UI8eeOXReTPh; fix some memory leaks spotted by Coverity via Jakub Jelen in bz#2366 feedback and ok dtucker@ OpenBSD-Commit-ID: 1e77547f60fdb5e2ffe23e2e4733c54d8d2d1137
2018-08-13upstream: better diagnosics on alg list assembly errors; okdjm@openbsd.org
deraadt@ markus@ OpenBSD-Commit-ID: 5a557e74b839daf13cc105924d2af06a1560faee
2018-08-11Some AIX fixes; report from Michael FeltDamien Miller
2018-08-10upstream: The script that cooks up PuTTY format host keys does notdtucker@openbsd.org
understand the new key format so convert back to old format to create the PuTTY key and remove it once done. OpenBSD-Regress-ID: 2a449a18846c3a144bc645135b551ba6177e38d3
2018-08-10upstream: improvedjm@openbsd.org
OpenBSD-Commit-ID: 40d839db0977b4e7ac8b647b16d5411d4faf2f60
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-05 11:46:08 +0000