summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-01Make integrity tests more robust against timeouts in the case where the ↵Colin Watson
first test in a series for a given MAC happens to modify the low bytes of a packet length.
2017-01-01Make integrity tests more robust against timeoutsColin Watson
If the first test in a series for a given MAC happens to modify the low bytes of a packet length, then ssh will time out and this will be interpreted as a test failure. Handle this failure mode. Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=2658 Patch-Name: regress-integrity-robust.patch Last-Update: 2017-01-01
2017-01-01Run regression tests inside annotate-output to try to diagnose timeout issues.Colin Watson
2016-12-31releasing package openssh version 1:7.4p1-3Colin Watson
2016-12-31Tweak regression test setup to cope with the case where some of the source ↵Colin Watson
directory is unreadable by the openssh-tests user.
2016-12-31Dump some useful log files if regression tests fail.Colin Watson
2016-12-31Run regression tests using 'sh -x' to try to get more information about ↵Colin Watson
failures.
2016-12-31Revert attempted hack around regress/forwarding.sh test failure, since it ↵Colin Watson
doesn't seem to help.
2016-12-29releasing package openssh version 1:7.4p1-2Colin Watson
2016-12-28Avoid calling into Kerberos libraries from ssh_gssapi_server_mechanisms in ↵Colin Watson
the privsep monitor.
2016-12-28Various Debian-specific configuration changesColin Watson
ssh: Enable ForwardX11Trusted, returning to earlier semantics which cause fewer problems with existing setups (http://bugs.debian.org/237021). ssh: Set 'SendEnv LANG LC_*' by default (http://bugs.debian.org/264024). ssh: Enable HashKnownHosts by default to try to limit the spread of ssh worms. ssh: Enable GSSAPIAuthentication by default. sshd: Enable PAM, disable ChallengeResponseAuthentication, and disable PrintMotd. sshd: Enable X11Forwarding. sshd: Set 'AcceptEnv LANG LC_*' by default. sshd: Change sftp subsystem path to /usr/lib/openssh/sftp-server. Document all of this. Author: Russ Allbery <rra@debian.org> Forwarded: not-needed Last-Update: 2016-12-26 Patch-Name: debian-config.patch
2016-12-28Add systemd readiness notification supportMichael Biebl
Bug-Debian: https://bugs.debian.org/778913 Forwarded: no Last-Update: 2016-01-04 Patch-Name: systemd-readiness.patch
2016-12-28Support synchronisation with service supervisor using SIGSTOPColin Watson
Author: Robie Basak <robie.basak@ubuntu.com> Forwarded: no Last-Update: 2014-04-14 Patch-Name: sigstop.patch
2016-12-28Give the ssh-askpass-gnome window a default iconVincent Untz
Bug-Ubuntu: https://bugs.launchpad.net/bugs/27152 Last-Update: 2010-02-28 Patch-Name: gnome-ssh-askpass2-icon.patch
2016-12-28Don't check the status field of the OpenSSL versionKurt Roeckx
There is no reason to check the version of OpenSSL (in Debian). If it's not compatible the soname will change. OpenSSH seems to want to do a check for the soname based on the version number, but wants to keep the status of the release the same. Remove that check on the status since it doesn't tell you anything about how compatible that version is. Author: Colin Watson <cjwatson@debian.org> Bug-Debian: https://bugs.debian.org/93581 Bug-Debian: https://bugs.debian.org/664383 Bug-Debian: https://bugs.debian.org/732940 Forwarded: not-needed Last-Update: 2014-10-07 Patch-Name: no-openssl-version-status.patch
2016-12-28Document consequences of ssh-agent being setgid in ssh-agent(1)Colin Watson
Bug-Debian: http://bugs.debian.org/711623 Forwarded: no Last-Update: 2013-06-08 Patch-Name: ssh-agent-setgid.patch
2016-12-28Refer to ssh's Upstart job as well as its init scriptColin Watson
Forwarded: not-needed Last-Update: 2013-09-14 Patch-Name: doc-upstart.patch
2016-12-28Document that HashKnownHosts may break tab-completionColin Watson
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1727 Bug-Debian: http://bugs.debian.org/430154 Last-Update: 2013-09-14 Patch-Name: doc-hash-tab-completion.patch
2016-12-28ssh(1): Refer to ssh-argv0(1)Colin Watson
Old versions of OpenSSH (up to 2.5 or thereabouts) allowed creating symlinks to ssh with the name of the host you want to connect to. Debian ships an ssh-argv0 script restoring this feature; this patch refers to its manual page from ssh(1). Bug-Debian: http://bugs.debian.org/111341 Forwarded: not-needed Last-Update: 2013-09-14 Patch-Name: ssh-argv0.patch
2016-12-28Adjust various OpenBSD-specific references in manual pagesColin Watson
No single bug reference for this patch, but history includes: http://bugs.debian.org/154434 (login.conf(5)) http://bugs.debian.org/513417 (/etc/rc) http://bugs.debian.org/530692 (ssl(8)) https://bugs.launchpad.net/bugs/456660 (ssl(8)) Forwarded: not-needed Last-Update: 2014-10-07 Patch-Name: openbsd-docs.patch
2016-12-28Install authorized_keys(5) as a symlink to sshd(8)Tomas Pospisek
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1720 Bug-Debian: http://bugs.debian.org/441817 Last-Update: 2013-09-14 Patch-Name: authorized-keys-man-symlink.patch
2016-12-28Add DebianBanner server configuration optionKees Cook
Setting this to "no" causes sshd to omit the Debian revision from its initial protocol handshake, for those scared by package-versioning.patch. Bug-Debian: http://bugs.debian.org/562048 Forwarded: not-needed Last-Update: 2015-11-29 Patch-Name: debian-banner.patch
2016-12-28Include the Debian version in our identificationMatthew Vernon
This makes it easier to audit networks for versions patched against security vulnerabilities. It has little detrimental effect, as attackers will generally just try attacks rather than bothering to scan for vulnerable-looking version strings. (However, see debian-banner.patch.) Forwarded: not-needed Last-Update: 2013-09-14 Patch-Name: package-versioning.patch
2016-12-28Mention ssh-keygen in ssh fingerprint changed warningScott Moser
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1843 Bug-Ubuntu: https://bugs.launchpad.net/bugs/686607 Last-Update: 2015-09-08 Patch-Name: mention-ssh-keygen-on-keychange.patch
2016-12-28Quieten logs when multiple from= restrictions are usedColin Watson
Bug-Debian: http://bugs.debian.org/630606 Forwarded: no Last-Update: 2013-09-14 Patch-Name: auth-log-verbosity.patch
2016-12-28Force use of DNSSEC even if "options edns0" isn't in resolv.confColin Watson
This allows SSHFP DNS records to be verified if glibc 2.11 is installed. Origin: vendor, https://cvs.fedoraproject.org/viewvc/F-12/openssh/openssh-5.2p1-edns.patch?revision=1.1&view=markup Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=572049 Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=572049 Last-Update: 2010-04-06 Patch-Name: dnssec-sshfp.patch
2016-12-28Look for $SHELL on the path for ProxyCommand/LocalCommandColin Watson
There's some debate on the upstream bug about whether POSIX requires this. I (Colin Watson) agree with Vincent and think it does. Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1494 Bug-Debian: http://bugs.debian.org/492728 Last-Update: 2013-09-14 Patch-Name: shell-path.patch
2016-12-28Adjust scp quoting in verbose modeNicolas Valcárcel
Tweak scp's reporting of filenames in verbose mode to be a bit less confusing with spaces. This should be revised to mimic real shell quoting. Bug-Ubuntu: https://bugs.launchpad.net/bugs/89945 Last-Update: 2010-02-27 Patch-Name: scp-quoting.patch
2016-12-28Allow harmless group-writabilityColin Watson
Allow secure files (~/.ssh/config, ~/.ssh/authorized_keys, etc.) to be group-writable, provided that the group in question contains only the file's owner. Rejected upstream for IMO incorrect reasons (e.g. a misunderstanding about the contents of gr->gr_mem). Given that per-user groups and umask 002 are the default setup in Debian (for good reasons - this makes operating in setgid directories with other groups much easier), we need to permit this by default. Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1060 Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=314347 Last-Update: 2013-09-14 Patch-Name: user-group-modes.patch
2016-12-28Reduce severity of "Killed by signal %d"Peter Samuelson
This produces irritating messages when using ProxyCommand or other programs that use ssh under the covers (e.g. Subversion). These messages are more normally printed by the calling program, such as the shell. According to the upstream bug, the right way to avoid this is to use the -q option, so we may drop this patch after further investigation into whether any software in Debian is still relying on it. Author: Colin Watson <cjwatson@debian.org> Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1118 Bug-Debian: http://bugs.debian.org/313371 Last-Update: 2013-09-14 Patch-Name: quieter-signals.patch
2016-12-28"LogLevel SILENT" compatibilityJonathan David Amery
"LogLevel SILENT" (-qq) was introduced in Debian openssh 1:3.0.1p1-1 to match the behaviour of non-free SSH, in which -q does not suppress fatal errors. However, this was unintentionally broken in 1:4.6p1-2 and nobody complained, so we've dropped most of it. The parts that remain are basic configuration file compatibility, and an adjustment to "Pseudo-terminal will not be allocated ..." which should be split out into a separate patch. Author: Matthew Vernon <matthew@debian.org> Author: Colin Watson <cjwatson@debian.org> Last-Update: 2013-09-14 Patch-Name: syslog-level-silent.patch
2016-12-28Various keepalive extensionsRichard Kettlewell
Add compatibility aliases for ProtocolKeepAlives and SetupTimeOut, supported in previous versions of Debian's OpenSSH package but since superseded by ServerAliveInterval. (We're probably stuck with this bit for compatibility.) In batch mode, default ServerAliveInterval to five minutes. Adjust documentation to match and to give some more advice on use of keepalives. Author: Ian Jackson <ian@chiark.greenend.org.uk> Author: Matthew Vernon <matthew@debian.org> Author: Colin Watson <cjwatson@debian.org> Last-Update: 2016-12-26 Patch-Name: keepalive-extensions.patch
2016-12-28Accept obsolete ssh-vulnkey configuration optionsColin Watson
These options were used as part of Debian's response to CVE-2008-0166. Nearly six years later, we no longer need to continue carrying the bulk of that patch, but we do need to avoid failing when the associated configuration options are still present. Last-Update: 2014-02-09 Patch-Name: ssh-vulnkey-compat.patch
2016-12-28Handle SELinux authorisation rolesManoj Srivastava
Rejected upstream due to discomfort with magic usernames; a better approach will need an SSH protocol change. In the meantime, this came from Debian's SELinux maintainer, so we'll keep it until we have something better. Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1641 Bug-Debian: http://bugs.debian.org/394795 Last-Update: 2015-08-19 Patch-Name: selinux-role.patch
2016-12-28Restore TCP wrappers supportColin Watson
Support for TCP wrappers was dropped in OpenSSH 6.7. See this message and thread: https://lists.mindrot.org/pipermail/openssh-unix-dev/2014-April/032497.html It is true that this reduces preauth attack surface in sshd. On the other hand, this support seems to be quite widely used, and abruptly dropping it (from the perspective of users who don't read openssh-unix-dev) could easily cause more serious problems in practice. It's not entirely clear what the right long-term answer for Debian is, but it at least probably doesn't involve dropping this feature shortly before a freeze. Forwarded: not-needed Last-Update: 2014-10-07 Patch-Name: restore-tcp-wrappers.patch
2016-12-28GSSAPI key exchange supportSimon Wilkinson
This patch has been rejected upstream: "None of the OpenSSH developers are in favour of adding this, and this situation has not changed for several years. This is not a slight on Simon's patch, which is of fine quality, but just that a) we don't trust GSSAPI implementations that much and b) we don't like adding new KEX since they are pre-auth attack surface. This one is particularly scary, since it requires hooks out to typically root-owned system resources." However, quite a lot of people rely on this in Debian, and it's better to have it merged into the main openssh package rather than having separate -krb5 packages (as we used to have). It seems to have a generally good security history. Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1242 Last-Updated: 2016-12-28 Patch-Name: gssapi.patch
2016-12-28Attempt to hack around regress/forwarding.sh test failure in some environments.Colin Watson
2016-12-27releasing package openssh version 1:7.4p1-1Colin Watson
2016-12-27When running regression tests under autopkgtest, use a non-root user with ↵Colin Watson
passwordless sudo.
2016-12-26Make debian/tests/regress executable.Colin Watson
2016-12-26Stop openssh-server.config exiting non-zero on fresh installations.Colin Watson
2016-12-26Build gnome-ssh-askpass with GTK+ 3 (LP: #801187).Colin Watson
2016-12-26Remove redundant "GSSAPIDelegateCredentials no" from ssh_config (already the ↵Colin Watson
upstream default), and document that setting ServerAliveInterval to 300 by default if BatchMode is set is Debian-specific (closes: #765630).
2016-12-26Various Debian-specific configuration changesColin Watson
ssh: Enable ForwardX11Trusted, returning to earlier semantics which cause fewer problems with existing setups (http://bugs.debian.org/237021). ssh: Set 'SendEnv LANG LC_*' by default (http://bugs.debian.org/264024). ssh: Enable HashKnownHosts by default to try to limit the spread of ssh worms. ssh: Enable GSSAPIAuthentication by default. sshd: Enable PAM, disable ChallengeResponseAuthentication, and disable PrintMotd. sshd: Enable X11Forwarding. sshd: Set 'AcceptEnv LANG LC_*' by default. sshd: Change sftp subsystem path to /usr/lib/openssh/sftp-server. Document all of this. Author: Russ Allbery <rra@debian.org> Forwarded: not-needed Last-Update: 2016-12-26 Patch-Name: debian-config.patch
2016-12-26Add systemd readiness notification supportMichael Biebl
Bug-Debian: https://bugs.debian.org/778913 Forwarded: no Last-Update: 2016-01-04 Patch-Name: systemd-readiness.patch
2016-12-26Support synchronisation with service supervisor using SIGSTOPColin Watson
Author: Robie Basak <robie.basak@ubuntu.com> Forwarded: no Last-Update: 2014-04-14 Patch-Name: sigstop.patch
2016-12-26Give the ssh-askpass-gnome window a default iconVincent Untz
Bug-Ubuntu: https://bugs.launchpad.net/bugs/27152 Last-Update: 2010-02-28 Patch-Name: gnome-ssh-askpass2-icon.patch
2016-12-26Don't check the status field of the OpenSSL versionKurt Roeckx
There is no reason to check the version of OpenSSL (in Debian). If it's not compatible the soname will change. OpenSSH seems to want to do a check for the soname based on the version number, but wants to keep the status of the release the same. Remove that check on the status since it doesn't tell you anything about how compatible that version is. Author: Colin Watson <cjwatson@debian.org> Bug-Debian: https://bugs.debian.org/93581 Bug-Debian: https://bugs.debian.org/664383 Bug-Debian: https://bugs.debian.org/732940 Forwarded: not-needed Last-Update: 2014-10-07 Patch-Name: no-openssl-version-status.patch
2016-12-26Document consequences of ssh-agent being setgid in ssh-agent(1)Colin Watson
Bug-Debian: http://bugs.debian.org/711623 Forwarded: no Last-Update: 2013-06-08 Patch-Name: ssh-agent-setgid.patch
2016-12-26Refer to ssh's Upstart job as well as its init scriptColin Watson
Forwarded: not-needed Last-Update: 2013-09-14 Patch-Name: doc-upstart.patch