summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-25upstream: Switch keys-command test from rsa to ed25519 since it'sdtucker@openbsd.org
supported for both OpenSSL and non-OpenSSL builds. OpenBSD-Regress-ID: 174be4be876edd493e4a5c851e5bc579885e7a0a
2019-07-25upstream: Make certificate tests work with the supported keydtucker@openbsd.org
algorithms. Allows tests to pass when built without OpenSSL. OpenBSD-Regress-ID: 617169a6dd9d06db3697a449d9a26c284eca20fc
2019-07-24upstream: Construct list of key types to test based on the typesdtucker@openbsd.org
supported by the binaries. OpenBSD-Regress-ID: fcbd115efacec8ab0ecbdb3faef79ac696cb1d62
2019-07-24upstream: Only use DSA key type in tests if binaries support it.dtucker@openbsd.org
OpenBSD-Regress-ID: 770e31fe61dc33ed8eea9c04ce839b33ddb4dc96
2019-07-24Split test targets further.Darren Tucker
Splits test into file-tests, t-exec, unit and interop-tests and their respective dependencies. Should allow running any set individually without having to build the other dependencies that are not needed for that specific test.
2019-07-24Add lib dependencies for regress binary targets.Darren Tucker
2019-07-24Make "unit" a dependency of "test".Darren Tucker
2019-07-23upstream rev 1.28: fix comment typo.Darren Tucker
2019-07-23Split regress-binaries into two targets.Darren Tucker
Split the binaries for the unit tests out into a regress-unit-binaries target, and add a dependency on it for only the unit tests. This allows us to run the integration tests only ("make t-exec") without building the unit tests, which allows us to run a subset of the tests when building --without-openssl without trying (and failing) to build the unit tests. This means there are two targets for "unit" which I *think* is valid (it works in testing, and makedepend will generate Makefiles of this form)a but I could be wrong.
2019-07-23upstream: Skip DH group generation test if binaries don't supportdtucker@openbsd.org
DH-GEX. OpenBSD-Regress-ID: 7c918230d969ecf7656babd6191a74526bffbffd
2019-07-23upstream: Only test conversion of key types supported by thedtucker@openbsd.org
binaries. OpenBSD-Regress-ID: e3f0938a0a7407e2dfbb90abc3ec979ab6e8eeea
2019-07-23upstream: Only add ssh-dss to allowed key types if it's supporteddtucker@openbsd.org
by the binary. OpenBSD-Regress-ID: 395a54cab16e9e4ece9aec047ab257954eebd413
2019-07-23Remove sys/cdefs.h include.Darren Tucker
It's not needed on -portable (that's handled by includes.h) and not all platforms have it.
2019-07-23Add headers to prevent warnings w/out OpenSSL.Darren Tucker
2019-07-23Include stdlib.h for free() and calloc().Darren Tucker
2019-07-23Re-apply portability changes to current sha2.{c,h}.Darren Tucker
Rather than attempt to apply 14 years' worth of changes to OpenBSD's sha2 I imported the current versions directly then re-applied the portability changes. This also allowed re-syncing digest-libc.c against upstream.
2019-07-23Import current sha2.c and sha2.h from OpenBSD.Darren Tucker
These are not changed from their original state, the next commit will re-apply the portable changes.
2019-07-23Rename valgrind "errors" to "failures".Darren Tucker
When valgrind is enabled, test-exec.sh counts the number of invocations that valgrind detects failures in, not the total number of errors detected. This makes the name to be more accurate.
2019-07-20Skip running sftp-chroot under Valgrind.Darren Tucker
2019-07-20upstream: Remove the sleeps and thus races from the forwardingdtucker@openbsd.org
test. They were originally required to work with Protocol 1, but now we can use ssh -N and the control socket without the sleeps. While there, suppress output fro the control exit commands. OpenBSD-Regress-ID: 4c51a1d651242f12c90074c18c61008a74c1c790
2019-07-20upstream: Allow SLEEPTIME to be overridden.dtucker@openbsd.org
OpenBSD-Regress-ID: 1596ab168729954be3d219933b2d01cc93687e76
2019-07-20upstream: Move sleep time into a variable so that we can increasedtucker@openbsd.org
it for platforms or configurations that are much slower then usual. OpenBSD-Regress-ID: 88586cabc800062c260d0b876bdcd4ca3f58a872
2019-07-19upstream: add regression tests for scp for out-of-destination path filedjm@openbsd.org
creation by Harry Sintonen via Jakub Jelen in bz3007 OpenBSD-Regress-ID: 01ae5fbc6ce400b2df5a84dc3152a9e31f354c07
2019-07-19upstream: Accept the verbose flag when searching for host keys in knowndjm@openbsd.org
hosts (i.e. "ssh-keygen -vF host") to print the matching host's random- art signature too. bz#3003 "amusing, pretty" deraadt@ OpenBSD-Commit-ID: 686221a5447d6507f40a2ffba5393984d889891f
2019-07-19Revert one dependency per line change.Darren Tucker
It turns out that having such a large number of lines in the .depend file will cause the memory usage of awk during AC_SUBST to blow up on at least NetBSD's awk, causing configure to fail.
2019-07-19fix SIGWINCH delivery of Solaris for mux sessionsDamien Miller
Remove PRIV_PROC_SESSION which was limiting ability to send SIGWINCH signals to other sessions. bz#3030; report and fix from Darren Moffat
2019-07-19Force dependencies one per line.Darren Tucker
Force makedepend to output one dependency per line, which will make reading diffs against it much easier. ok djm@
2019-07-19make depend.Darren Tucker
2019-07-19Show when skipping valgrind for a test.Darren Tucker
2019-07-19Enable connect-privsep test with valgrind.Darren Tucker
connect-privsep seems to work OK with valgrind now so don't skip valgrind on it.
2019-07-19Show valgrind results and error counts.Darren Tucker
2019-07-19Fix format string integer type in error message.Darren Tucker
2019-07-18upstream: fix off-by-one in sshbuf_dtob64() base64 wrapping that coulddjm@openbsd.org
cause extra newlines to be appended at the end of the base64 text (ugly, but harmless). Found and fixed by Sebastian Kinne OpenBSD-Commit-ID: 9fe290bd68f706ed8f986a7704ca5a2bd32d7b68
2019-07-18Fail tests if Valgrind enabled and reports errors.Darren Tucker
Also dump the failing valgrind report to stdout (not the cleanest solution, but better than nothing).
2019-07-18Allow low-priv tests to write to pipe dir.Darren Tucker
When running regression tests with Valgrind and SUDO, the low-priv agent tests need to be able to create pipes in the appropriate directory.
2019-07-17Put valgrind vgdb files to a specific directory.Darren Tucker
Valgrind by default puts vgdb files and pipes under /tmp, however it is not always able to clean them up, which can cause test failures when there's a pid/file collision. Using a specific directory ensures that we can clean up and start clean.
2019-07-17upstream: adapt to sshbuf_dtob64() changedjm@openbsd.org
OpenBSD-Regress-ID: 82374a83edf0955fd1477169eee3f5d6467405a6
2019-07-17upstream: Remove ssh1 files from CLEANFILES since ssh1 no longerdtucker@openbsd.org
supported. OpenBSD-Regress-ID: 5b9ae869dc669bac05939b4a2fdf44ee067acfa0
2019-07-17upstream: Update names of host key files in CLEANFILES to matchdtucker@openbsd.org
recent changes to the tests. OpenBSD-Regress-ID: 28743052de3acf70b06f18333561497cd47c4ecf
2019-07-16dependDamien Miller
2019-07-16upstream: remove mostly vestigal uuencode.[ch]; moving the only uniquedjm@openbsd.org
functionality there (wrapping of base64-encoded data) to sshbuf functions; feedback and ok markus@ OpenBSD-Commit-ID: 4dba6735d88c57232f6fccec8a08bdcfea44ac4c
2019-07-16Hook memmem compat code into build.Darren Tucker
This fixes builds on platforms that don't have it (at least old DragonFly, probably others).
2019-07-16Import memmem.c from OpenBSD.Darren Tucker
2019-07-15upstream: unit tests for sshbuf_cmp() and sshbuf_find(); ok markusdjm@openbsd.org
OpenBSD-Regress-ID: b52d36bc3ab6dc158c1e59a9a4735f821cf9e1fd
2019-07-15upstream: support PKCS8 as an optional format for storage ofdjm@openbsd.org
private keys, enabled via "ssh-keygen -m PKCS8" on operations that save private keys to disk. The OpenSSH native key format remains the default, but PKCS8 is a superior format to PEM if interoperability with non-OpenSSH software is required, as it may use a less terrible KDF (IIRC PEM uses a single round of MD5 as a KDF). adapted from patch by Jakub Jelen via bz3013; ok markus OpenBSD-Commit-ID: 027824e3bc0b1c243dc5188504526d73a55accb1
2019-07-15upstream: two more bounds-checking sshbuf counterparts to commondjm@openbsd.org
string operations: sshbuf_cmp() (bcmp-like) and sshbuf_find() (memmem like) feedback and ok markus@ OpenBSD-Commit-ID: fd071ec2485c7198074a168ff363a0d6052a706a
2019-07-15Clear valgrind-out dir to prevent collisions.Darren Tucker
2019-07-15Allow agent tests to write to valgrind dir.Darren Tucker
2019-07-15upstream: unit tests for sshbuf_peek/poke bounds-checked random accessdjm@openbsd.org
functions. ok markus@ OpenBSD-Regress-ID: 034c4284b1da6b12e25c762a6b958efacdafbaef
2019-07-15upstream: add some functions to perform random-access read/writedjm@openbsd.org
operations inside buffers with bounds checking. Intended to replace manual pointer arithmetic wherever possible. feedback and ok markus@ OpenBSD-Commit-ID: 91771fde7732738f1ffed078aa5d3bee6d198409
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-30 08:51:54 +0000