Age | Commit message (Collapse) | Author |
|
revision 1.24
date: 2013/11/24 23:51:29; author: deraadt; state: Exp; lines: +4 -4;
most obvious unsigned char casts for ctype
ok jca krw ingo
|
|
revision 1.23
date: 2010/05/14 13:30:34; author: millert; state: Exp; lines: +41 -39;
Defer installing signal handlers until echo is disabled so that we
get suspended normally when not the foreground process. Fix potential
infinite loop when restoring terminal settings if process is in the
background when restore occurs. OK miod@
|
|
This makes it a no-op when we use it below, which allows us to re-sync
those lines with the upstream and make future updates easier.
|
|
tidy up the formatting in this file. more specifically,
replace .Dq, which looks appalling, with .Cm, where appropriate;
Upstream-ID: ff8e90aa0343d9bb56f40a535e148607973cc738
|
|
add a comment about implicitly-expected checks to
sshkey_ec_validate_public()
Upstream-ID: 74a7f71c28f7c13a50f89fc78e7863b9cd61713f
|
|
fix some -Wpointer-sign warnings in the new mux proxy; ok
markus@
Upstream-ID: b1ba7b3769fbc6b7f526792a215b0197f5e55dfd
|
|
Add a makefile rule to create the ssh library when
regress needs it. This allows to run the ssh regression tests without doing
a "make build" before. Discussed with dtucker@ and djm@; OK djm@
Upstream-Regress-ID: ce489bd53afcd471225a125b4b94565d4717c025
|
|
Allow to run ssh regression tests as root. If the user
is already root, the test should not expect that SUDO is set. If ssh needs
another user, use sudo or doas to switch from root if necessary. OK dtucker@
Upstream-Regress-ID: b464e55185ac4303529e3e6927db41683aaeace2
|
|
ssh proxy mux mode (-O proxy; idea from Simon Tatham): - mux
client speaks the ssh-packet protocol directly over unix-domain socket. - mux
server acts as a proxy, translates channel IDs and relays to the server. - no
filedescriptor passing necessary. - combined with unix-domain forwarding it's
even possible to run mux client and server on different machines. feedback
& ok djm@
Upstream-ID: 666a2fb79f58e5c50e246265fb2b9251e505c25b
|
|
put back some pre-auth zlib bits that I shouldn't have
removed - they are still used by the client. Spotted by naddy@
Upstream-ID: 80919468056031037d56a1f5b261c164a6f90dc2
|
|
restore pre-auth compression support in the client -- the
previous commit was intended to remove it from the server only.
remove a few server-side pre-auth compression bits that escaped
adjust wording of Compression directive in sshd_config(5)
pointed out by naddy@ ok markus@
Upstream-ID: d23696ed72a228dacd4839dd9f2dec424ba2016b
|
|
use a separate TOKENS section, as we've done for
sshd_config(5); help/ok djm
Upstream-ID: 640e32b5e4838e4363738cdec955084b3579481d
|
|
We no longer need to wrap/replace mmap for portability now that
pre-auth compression has been removed from OpenSSH.
|
|
Remove support for pre-authentication compression. Doing
compression early in the protocol probably seemed reasonable in the 1990s,
but today it's clearly a bad idea in terms of both cryptography (cf. multiple
compression oracle attacks in TLS) and attack surface.
Moreover, to support it across privilege-separation zlib needed
the assistance of a complex shared-memory manager that made the
required attack surface considerably larger.
Prompted by Guido Vranken pointing out a compiler-elided security
check in the shared memory manager found by Stack
(http://css.csail.mit.edu/stack/); ok deraadt@ markus@
NB. pre-auth authentication has been disabled by default in sshd
for >10 years.
Upstream-ID: 32af9771788d45a0779693b41d06ec199d849caf
|
|
Avoid a theoretical signed integer overflow should
BN_num_bytes() ever violate its manpage and return a negative value. Improve
order of tests to avoid confusing increasingly pedantic compilers.
Reported by Guido Vranken from stack (css.csail.mit.edu/stack)
unstable optimisation analyser output. ok deraadt@
Upstream-ID: f8508c830c86d8f36c113985e52bf8eedae23505
|
|
Reported by Glenn Golden
Diagnosis and fix from Ingo Schwarze
|
|
missing bit from previous commit
Upstream-ID: 438d5ed6338b28b46e822eb13eee448aca31df37
|
|
organise the token stuff into a separate section; ok
markus for an earlier version of the diff ok/tweaks djm
Upstream-ID: 81a6daa506a4a5af985fce7cf9e59699156527c8
|
|
mention curve25519-sha256 KEX
Upstream-ID: 33ae1f433ce4795ffa6203761fbdf86e0d7ffbaf
|
|
support plain curve25519-sha256 KEX algorithm now that it
is approaching standardisation (same algorithm is currently supported as
curve25519-sha256@libssh.org)
Upstream-ID: 5e2b6db2e72667048cf426da43c0ee3fc777baa2
|
|
If ssh receives a PACKET_DISCONNECT during userauth it
will cause ssh_dispatch_run(DISPATCH_BLOCK, ...) to return without the
session being authenticated. Check for this and exit if necessary. ok djm@
Upstream-ID: b3afe126c0839d2eae6cddd41ff2ba317eda0903
|
|
correctly return errors from kex_send_ext_info(). Fix from
Sami Farin via https://github.com/openssh/openssh-portable/pull/50
Upstream-ID: c85999af28aaecbf92cfa2283381df81e839b42c
|
|
cast uint64_t for printf
Upstream-ID: 76d23e89419ccbd2320f92792a6d878211666ac1
|
|
disable tests for affirmative negated match after backout of
match change
Upstream-Regress-ID: acebb8e5042f03d66d86a50405c46c4de0badcfd
|
|
Revert two recent changes to negated address matching. The
new behaviour offers unintuitive surprises. We'll find a better way to deal
with single negated matches.
match.c 1.31:
> fix matching for pattern lists that contain a single negated match,
> e.g. "Host !example"
>
> report and patch from Robin Becker. bz#1918 ok dtucker@
addrmatch.c 1.11:
> fix negated address matching where the address list consists of a
> single negated match, e.g. "Match addr !192.20.0.1"
>
> Report and patch from Jakub Jelen. bz#2397 ok dtucker@
Upstream-ID: ec96c770f0f5b9a54e5e72fda25387545e9c80c6
|
|
test all the AuthorizedPrincipalsCommand % expansions
Upstream-Regress-ID: 0a79a84dfaa59f958e46b474c3db780b454d30e3
|
|
add a way for principals command to get see key ID and serial
too
Upstream-ID: 0d30978bdcf7e8eaeee4eea1b030eb2eb1823fcb
|
|
add a note on kexfuzz' limitations
Upstream-Regress-ID: 03804d4a0dbc5163e1a285a4c8cc0a76a4e864ec
|
|
fix for newer modp DH groups
(diffie-hellman-group14-sha256 etc)
Upstream-Regress-ID: fe942c669959462b507516ae1634fde0725f1c68
|
|
move inbound NEWKEYS handling to kex layer; otherwise
early NEWKEYS causes NULL deref; found by Robert Swiecki/honggfuzz; fixed
with & ok djm@
Upstream-ID: 9a68b882892e9f51dc7bfa9f5a423858af358b2f
|
|
Replace two more arc4random() loops with
arc4random_buf().
tweaks and ok dtucker
ok deraadt
Upstream-ID: 738d3229130ccc7eac975c190276ca6fcf0208e4
|
|
replace two arc4random loops with arc4random_buf ok
deraadt natano
Upstream-ID: e18ede972d1737df54b49f011fa4f3917a403f48
|
|
take fingerprint of correct key for
AuthorizedPrincipalsCommand
Upstream-ID: 553581a549cd6a3e73ce9f57559a325cc2cb1f38
|
|
add %-escapes to AuthorizedPrincipalsCommand to match those
supported for AuthorizedKeysCommand (key, key type, fingerprint, etc) and a
few more to provide access to the certificate's CA key; 'looks ok' dtucker@
Upstream-ID: 6b00fd446dbebe67f4e4e146d2e492d650ae04eb
|
|
Improve test coverage of ssh-keygen -T a bit.
Upstream-Regress-ID: 8851668c721bcc2b400600cfc5a87644cc024e72
|
|
Add testcase for ssh-keygen -j, -J and -K options for
moduli screening. Does not currently test generation as that is extremely
slow.
Upstream-Regress-ID: 9de6ce801377ed3ce0a63a1413f1cd5fd3c2d062
|
|
add tests for addr_match_list()
Upstream-Regress-ID: fae2d1fef84687ece584738a924c7bf969616c8e
|
|
handle certs in rsa_hash_alg_from_ident(), saving an
unnecessary special case elsewhere.
Upstream-ID: 901cb081c59d6d2698b57901c427f3f6dc7397d4
|
|
list all supported signature algorithms in the
server-sig-algs Reported by mb AT smartftp.com in bz#2547 and (independantly)
Ron Frederick; ok markus@
Upstream-ID: ddf702d721f54646b11ef2cee6d916666cb685cd
|
|
|
|
|
|
|
|
|
|
|
|
Spaces->tabs.
Upstream-ID: f4829dfc3f36318273f6082b379ac562eead70b7
|
|
Style whitespace fix. Also happens to remove a no-op
diff with portable.
Upstream-ID: 45d90f9a62ad56340913a433a9453eb30ceb8bf3
|
|
Add MAXIMUM(), MINIMUM(), and ROUNDUP() to misc.h, then
use those definitions rather than pulling <sys/param.h> and unknown namespace
pollution. ok djm markus dtucker
Upstream-ID: 712cafa816c9f012a61628b66b9fbd5687223fb8
|
|
sort; from matthew martin
Upstream-ID: 73cec7f7ecc82d37a4adffad7745e4684de67ce7
|
|
ssh_set_newkeys: print correct block counters on
rekeying; ok djm@
Upstream-ID: 32bb7a9cb9919ff5bab28d50ecef3a2b2045dd1e
|
|
update ext_info_c every time we receive a kexinit msg;
fixes sending of ext_info if privsep is disabled; report Aris Adamantiadis &
Mancha; ok djm@
Upstream-ID: 2ceaa1076e19dbd3542254b4fb8e42d608f28856
|