| Age | Commit message (Collapse) | Author |
|---|
|
backported to 4.7p1:
- 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9):
+ Added chroot(2) support for sshd(8), controlled by a new option
"ChrootDirectory" (closes: #139047, LP: #24777).
+ Linked sftp-server(8) into sshd(8). The internal sftp server is used
when the command "internal-sftp" is specified in a Subsystem or
ForceCommand declaration. When used with ChrootDirectory, the
internal sftp server requires no special configuration of files
inside the chroot environment.
+ Added a protocol extension method "posix-rename@openssh.com" for
sftp-server(8) to perform POSIX atomic rename() operations; sftp(1)
prefers this if available (closes: #308561).
+ Removed the fixed limit of 100 file handles in sftp-server(8).
+ ssh(8) will now skip generation of SSH protocol 1 ephemeral server
keys when in inetd mode and protocol 2 connections are negotiated.
This speeds up protocol 2 connections to inetd-mode servers that
also allow Protocol 1.
+ Accept the PermitRootLogin directive in a sshd_config(5) Match
block. Allows for, e.g. permitting root only from the local network.
+ Reworked sftp(1) argument splitting and escaping to be more
internally consistent (i.e. between sftp commands) and more
consistent with sh(1). Please note that this will change the
interpretation of some quoted strings, especially those with
embedded backslash escape sequences.
+ Support "Banner=none" in sshd_config(5) to disable sending of a
pre-login banner (e.g. in a Match block).
+ ssh(1) ProxyCommands are now executed with $SHELL rather than
/bin/sh.
+ ssh(1)'s ConnectTimeout option is now applied to both the TCP
connection and the SSH banner exchange (previously it just covered
the TCP connection). This allows callers of ssh(1) to better detect
and deal with stuck servers that accept a TCP connection but don't
progress the protocol, and also makes ConnectTimeout useful for
connections via a ProxyCommand.
+ scp(1) incorrectly reported "stalled" on slow copies (closes:
#140828).
+ scp(1) date underflow for timestamps before epoch.
+ ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS,
instead of the current standard RRSIG.
+ Correctly drain ACKs when a sftp(1) upload write fails midway,
avoids a fatal() exit from what should be a recoverable condition.
+ Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF
hostname") to not include any IP address in the data to be hashed.
+ Make ssh(1) skip listening on the IPv6 wildcard address when a
binding address of 0.0.0.0 is used against an old SSH server that
does not support the RFC4254 syntax for wildcard bind addresses.
+ Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is
already done for X11/TCP forwarding sockets (closes: #439661).
+ Fix FD leak that could hang a ssh(1) connection multiplexing master.
+ Make ssh(1) -q option documentation consistent with reality.
+ Fixed sshd(8) PAM support not calling pam_session_close(), or
failing to call it with root privileges (closes: #372680).
+ Fix activation of OpenSSL engine support when requested in configure
(LP: #119295).
- 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1):
+ Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1)
and ssh-keygen(1). Visual fingerprint display is controlled by a new
ssh_config(5) option "VisualHostKey". The intent is to render SSH
host keys in a visual form that is amenable to easy recall and
rejection of changed host keys.
+ sshd_config(5) now supports CIDR address/masklen matching in "Match
address" blocks, with a fallback to classic wildcard matching.
+ sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys
from="..." restrictions, also with a fallback to classic wildcard
matching.
+ Added an extended test mode (-T) to sshd(8) to request that it write
its effective configuration to stdout and exit. Extended test mode
also supports the specification of connection parameters (username,
source address and hostname) to test the application of
sshd_config(5) Match rules.
+ ssh(1) now prints the number of bytes transferred and the overall
connection throughput for SSH protocol 2 sessions when in verbose
mode (previously these statistics were displayed for protocol 1
connections only).
+ sftp-server(8) now supports extension methods statvfs@openssh.com
and fstatvfs@openssh.com that implement statvfs(2)-like operations.
+ sftp(1) now has a "df" command to the sftp client that uses the
statvfs@openssh.com to produce a df(1)-like display of filesystem
space and inode utilisation (requires statvfs@openssh.com support on
the server).
+ Added a MaxSessions option to sshd_config(5) to allow control of the
number of multiplexed sessions supported over a single TCP
connection. This allows increasing the number of allowed sessions
above the previous default of 10, disabling connection multiplexing
(MaxSessions=1) or disallowing login/shell/subsystem sessions
entirely (MaxSessions=0).
+ Added a no-more-sessions@openssh.com global request extension that
is sent from ssh(1) to sshd(8) when the client knows that it will
never request another session (i.e. when session multiplexing is
disabled). This allows a server to disallow further session requests
and terminate the session in cases where the client has been
hijacked.
+ ssh-keygen(1) now supports the use of the -l option in combination
with -F to search for a host in ~/.ssh/known_hosts and display its
fingerprint.
+ ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of
"rsa1".
+ Added an AllowAgentForwarding option to sshd_config(8) to control
whether authentication agent forwarding is permitted. Note that this
is a loose control, as a client may install their own unofficial
forwarder.
+ ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when
receiving network data, resulting in a ~10% speedup.
+ ssh(1) and sshd(8) will now try additional addresses when connecting
to a port forward destination whose DNS name resolves to more than
one address. The previous behaviour was to try the only first
address and give up if that failed.
+ ssh(1) and sshd(8) now support signalling that channels are
half-closed for writing, through a channel protocol extension
notification "eow@openssh.com". This allows propagation of closed
file descriptors, so that commands such as "ssh -2 localhost od
/bin/ls | true" do not send unnecessary data over the wire.
+ sshd(8): increased the default size of ssh protocol 1 ephemeral keys
from 768 to 1024 bits.
+ When ssh(1) has been requested to fork after authentication ("ssh
-f") with ExitOnForwardFailure enabled, delay the fork until after
replies for any -R forwards have been seen. Allows for robust
detection of -R forward failure when using -f.
+ "Match group" blocks in sshd_config(5) now support negation of
groups. E.g. "Match group staff,!guests".
+ sftp(1) and sftp-server(8) now allow chmod-like operations to set
set[ug]id/sticky bits.
+ The MaxAuthTries option is now permitted in sshd_config(5) match
blocks.
+ Multiplexed ssh(1) sessions now support a subset of the ~ escapes
that are available to a primary connection.
+ ssh(1) connection multiplexing will now fall back to creating a new
connection in most error cases (closes: #352830).
+ Make ssh(1) deal more gracefully with channel requests that fail.
Previously it would optimistically assume that requests would always
succeed, which could cause hangs if they did not (e.g. when the
server runs out of file descriptors).
+ ssh(1) now reports multiplexing errors via the multiplex slave's
stderr where possible (subject to LogLevel in the mux master).
+ Prevent sshd(8) from erroneously applying public key restrictions
leaned from ~/.ssh/authorized_keys to other authentication methods
when public key authentication subsequently fails (LP: #161047).
+ Fixed an UMAC alignment problem that manifested on Itanium
platforms.
|
|
|
|
|
|
(bz#1372)
|
|
|
|
as environment.
|
|
specific tests on platforms that don't do IPv6.
|
|
- djm@cvs.openbsd.org 2008/06/10 03:57:27
[servconf.c match.h sshd_config.5]
support CIDR address matching in sshd_config "Match address" blocks, with
full support for negation and fall-back to classic wildcard matching.
For example:
Match address 192.0.2.0/24,3ffe:ffff::/32,!10.*
PasswordAuthentication yes
addrmatch.c code mostly lifted from flowd's addr.c
feedback and ok dtucker@
|
|
#481283).
|
|
[clientloop.c clientloop.h ssh.c mux.c]
tidy up session multiplexing code, moving it into its own file and
making the function names more consistent - making ssh.c and
clientloop.c a fair bit more readable.
ok markus@
|
|
- Add key blacklisting support. Keys listed in
/etc/ssh/blacklist.TYPE-LENGTH will be rejected for authentication by
sshd, unless "PermitBlacklistedKeys yes" is set in
/etc/ssh/sshd_config.
- Add a new program, ssh-vulnkey, which can be used to check keys
against these blacklists.
- Depend on openssh-blacklist.
- Force dependencies on libssl0.9.8 / libcrypto0.9.8-udeb to at least
0.9.8g-9.
- Automatically regenerate known-compromised host keys, with a
critical-priority debconf note. (I regret that there was no time to
gather translations.)
|
|
puttygen(1) by $PATH
|
|
self: make changes to Makefile.in next time, not the generated Makefile).
|
|
[servconf.c servconf.h session.c sftp-server.c sftp.h sshd_config]
[sshd_config.5]
add sshd_config ChrootDirectory option to chroot(2) users to a directory
and tweak internal sftp server to work with it (no special files in chroot
required). ok markus@
|
|
[servconf.c servconf.h session.c sftp-server.c sftp.h sshd_config]
[sshd_config.5]
add sshd_config ChrootDirectory option to chroot(2) users to a directory
and tweak internal sftp server to work with it (no special files in
chroot required). ok markus@
|
|
- CVE-2007-4752: Prevent ssh(1) from using a trusted X11 cookie if
creation of an untrusted cookie fails; found and fixed by Jan Pechanec
(closes: #444738).
- sshd(8) in new installations defaults to SSH Protocol 2 only. Existing
installations are unchanged.
- The SSH channel window size has been increased, and both ssh(1)
sshd(8) now send window updates more aggressively. These improves
performance on high-BDP (Bandwidth Delay Product) networks.
- ssh(1) and sshd(8) now preserve MAC contexts between packets, which
saves 2 hash calls per packet and results in 12-16% speedup for
arcfour256/hmac-md5.
- A new MAC algorithm has been added, UMAC-64 (RFC4418) as
"umac-64@openssh.com". UMAC-64 has been measured to be approximately
20% faster than HMAC-MD5.
- Failure to establish a ssh(1) TunnelForward is now treated as a fatal
error when the ExitOnForwardFailure option is set.
- ssh(1) returns a sensible exit status if the control master goes away
without passing the full exit status.
- When using a ProxyCommand in ssh(1), set the outgoing hostname with
gethostname(2), allowing hostbased authentication to work.
- Make scp(1) skip FIFOs rather than hanging (closes: #246774).
- Encode non-printing characters in scp(1) filenames. These could cause
copies to be aborted with a "protocol error".
- Handle SIGINT in sshd(8) privilege separation child process to ensure
that wtmp and lastlog records are correctly updated.
- Report GSSAPI mechanism in errors, for libraries that support multiple
mechanisms.
- Improve documentation for ssh-add(1)'s -d option.
- Rearrange and tidy GSSAPI code, removing server-only code being linked
into the client.
- Delay execution of ssh(1)'s LocalCommand until after all forwardings
have been established.
- In scp(1), do not truncate non-regular files.
- Improve exit message from ControlMaster clients.
- Prevent sftp-server(8) from reading until it runs out of buffer space,
whereupon it would exit with a fatal error (closes: #365541).
- pam_end() was not being called if authentication failed
(closes: #405041).
- Manual page datestamps updated (closes: #433181).
|
|
Pospisek; closes: #441817).
|
|
changes not previously backported to 4.3p2:
- 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4):
+ On portable OpenSSH, fix a GSSAPI authentication abort that could be
used to determine the validity of usernames on some platforms.
+ Implemented conditional configuration in sshd_config(5) using the
"Match" directive. This allows some configuration options to be
selectively overridden if specific criteria (based on user, group,
hostname and/or address) are met. So far a useful subset of
post-authentication options are supported and more are expected to
be added in future releases.
+ Add support for Diffie-Hellman group exchange key agreement with a
final hash of SHA256.
+ Added a "ForceCommand" directive to sshd_config(5). Similar to the
command="..." option accepted in ~/.ssh/authorized_keys, this forces
the execution of the specified command regardless of what the user
requested. This is very useful in conjunction with the new "Match"
option.
+ Add a "PermitOpen" directive to sshd_config(5). This mirrors the
permitopen="..." authorized_keys option, allowing fine-grained
control over the port-forwardings that a user is allowed to
establish.
+ Add optional logging of transactions to sftp-server(8).
+ ssh(1) will now record port numbers for hosts stored in
~/.ssh/known_hosts when a non-standard port has been requested
(closes: #50612).
+ Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a
non-zero exit code) when requested port forwardings could not be
established.
+ Extend sshd_config(5) "SubSystem" declarations to allow the
specification of command-line arguments.
+ Replacement of all integer overflow susceptible invocations of
malloc(3) and realloc(3) with overflow-checking equivalents.
+ Many manpage fixes and improvements.
+ Add optional support for OpenSSL hardware accelerators (engines),
enabled using the --with-ssl-engine configure option.
+ Tokens in configuration files may be double-quoted in order to
contain spaces (closes: #319639).
+ Move a debug() call out of a SIGCHLD handler, fixing a hang when the
session exits very quickly (closes: #307890).
+ Fix some incorrect buffer allocation calculations (closes: #410599).
+ ssh-add doesn't ask for a passphrase if key file permissions are too
liberal (closes: #103677).
+ Likewise, ssh doesn't ask either (closes: #99675).
- 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6):
+ sshd now allows the enabling and disabling of authentication methods
on a per user, group, host and network basis via the Match directive
in sshd_config.
+ Fixed an inconsistent check for a terminal when displaying scp
progress meter (closes: #257524).
+ Fix "hang on exit" when background processes are running at the time
of exit on a ttyful/login session (closes: #88337).
* Update to current GSSAPI patch from
http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch;
install ChangeLog.gssapi.
|
|
[kex.h mac.c mac.h monitor_wrap.c myproposal.h packet.c ssh.1]
[ssh_config.5 sshd.8 sshd_config.5]
Add a new MAC algorithm for data integrity, UMAC-64 (not default yet,
must specify umac-64@openssh.com). Provides about 20% end-to-end speedup
compared to hmac-md5. Represents a different approach to message
authentication to that of HMAC that may be beneficial if HMAC based on
one of its underlying hash algorithms is found to be vulnerable to a
new attack. http://www.ietf.org/rfc/rfc4418.txt
in conjunction with and OK djm@
|
|
LIBWRAP and LIBPAM variables in Makefile with the general-purpose
SSHDLIBS. "I like" djm@
|
|
* NMU to update SELinux patch, bringing it in line with current selinux
releases. The patch for this NMU is simply the Bug#394795 patch,
and no other changes. (closes: #394795)
|
|
autoconf 2.60 from complaining.
|
|
Support SMF in Solaris Packages if enabled by configure. Patch from
Chad Mynhier, tested by dtucker@
|
|
[platform.c platform.h sshd.c openbsd-compat/Makefile.in]
[openbsd-compat/openbsd-compat.h openbsd-compat/port-solaris.c]
[openbsd-compat/port-solaris.h] Add support for Solaris process
contracts, enabled with --use-solaris-contracts. Patch from Chad
Mynhier, tweaked by dtucker@ and myself; ok dtucker@
|
|
Makefile. Patch from santhi.amirta at gmail, ok djm.
|
|
Remove generated openbsd-compat/regress/Makefile in distclean target
|
|
|
|
[bufaux.c bufbn.c Makefile.in]
Move Buffer bignum functions into their own file, bufbn.c. This means
that sftp and sftp-server (which use the Buffer functions in bufaux.c
but not the bignum ones) no longer need to be linked with libcrypto.
ok markus@
|
|
[contrib/redhat/sshd.init openbsd-compat/Makefile.in]
[openbsd-compat/openbsd-compat.h openbsd-compat/port-linux.c]
[openbsd-compat/port-linux.h] Add support for SELinux, setting
the execution and TTY contexts. based on patch from Daniel Walsh,
bz #880; ok dtucker@
|
|
|
|
Add first attempt at regress tests for compat library. ok djm@
|
|
[openbsd-compat/port-tun.c openbsd-compat/port-tun.h] Add support
for tunnel forwarding for FreeBSD and NetBSD. NetBSD's support is
limited to IPv4 tunnels only, and most versions don't support the
tap(4) device at all.
|
|
- Add GSSAPI key exchange support from
http://www.sxw.org.uk/computing/patches/openssh.html (thanks, Stephen
Frost).
|
|
|
|
- Added SELinux capability, and turned it on be default. Added
restorecon calls in preinst and postinst (should not matter if the
machine is not SELinux aware). By and large, the changes made should
have no effect unless the rules file calls --with-selinux; and even
then there should be no performance hit for machines not actively
running SELinux.
- Modified the preinst and postinst to call restorecon to set the
security context for the generated public key files.
- Added a comment to /etc/pam.d/ssh to indicate that an SELinux system
may want to also include pam_selinux.so.
|
|
|
|
|
|
[misc.c misc.h tildexpand.c Makefile.in]
replace tilde_expand_filename with a simpler implementation, ahead of
more whacking; ok deraadt@
|
|
been used for a while
|
|
binaries without the config files. Primarily useful for packaging.
Patch from phil at usc.edu. ok djm@
|
|
defines.h] Bug #125: Add *EXPERIMENTAL* BSM audit support. Configure
--with-audit=bsm to enable. Patch originally from Sun Microsystems,
parts by John R. Jackson. ok djm@
|
|
monitor.h monitor_wrap.c monitor_wrap.h session.c sshd.c] Bug #125:
(first stage) Add audit instrumentation to sshd, currently disabled by
default. with suggestions from and djm@
|
|
"make survey" and "make send-survey". This will provide data on the
configure parameters, platform and platform features to the development
team, which will allow (among other things) better targetting of testing.
It's entirely voluntary and is off be default. ok djm@
|
|
option and supporting makefile bits and documentation.
|
|
of shell constructs. Patch from cjwatson at debian.org.
|
|
builds too, from vinschen at redhat.com.
|
|
|
|
it does the right thing on all platforms. ok djm@
|
|
|
|
OK dtucker@
|
