summaryrefslogtreecommitdiff
path: root/auth-rsa.c
AgeCommit message (Collapse)Author
2013-05-07* New upstream release (http://www.openssh.com/txt/release-6.2).Colin Watson
- Add support for multiple required authentication in SSH protocol 2 via an AuthenticationMethods option (closes: #195716). - Fix Sophie Germain formula in moduli(5) (closes: #698612). - Update ssh-copy-id to Phil Hands' greatly revised version (closes: #99785, #322228, #620428; LP: #518883, #835901, #1074798).
2012-10-31 - djm@cvs.openbsd.org 2012/10/30 21:29:55Damien Miller
[auth-rsa.c auth.c auth.h auth2-pubkey.c servconf.c servconf.h] [sshd.c sshd_config sshd_config.5] new sshd_config option AuthorizedKeysCommand to support fetching authorized_keys from a command in addition to (or instead of) from the filesystem. The command is run as the target server user unless another specified via a new AuthorizedKeysCommandUser option. patch originally by jchadima AT redhat.com, reworked by me; feedback and ok markus@
2011-09-06* New upstream release (http://www.openssh.org/txt/release-5.9).Colin Watson
- Introduce sandboxing of the pre-auth privsep child using an optional sshd_config(5) "UsePrivilegeSeparation=sandbox" mode that enables mandatory restrictions on the syscalls the privsep child can perform. - Add new SHA256-based HMAC transport integrity modes from http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt. - The pre-authentication sshd(8) privilege separation slave process now logs via a socket shared with the master process, avoiding the need to maintain /dev/log inside the chroot (closes: #75043, #429243, #599240). - ssh(1) now warns when a server refuses X11 forwarding (closes: #504757). - sshd_config(5)'s AuthorizedKeysFile now accepts multiple paths, separated by whitespace (closes: #76312). The authorized_keys2 fallback is deprecated but documented (closes: #560156). - ssh(1) and sshd(8): set IPv6 traffic class from IPQoS, as well as IPv4 ToS/DSCP (closes: #498297). - ssh-add(1) now accepts keys piped from standard input. E.g. "ssh-add - < /path/to/key" (closes: #229124). - Clean up lost-passphrase text in ssh-keygen(1) (closes: #444691). - Say "required" rather than "recommended" in unprotected-private-key warning (LP: #663455).
2011-07-28Quieten logs when multiple from= restrictions are used in differentColin Watson
authorized_keys lines for the same key; it's still not ideal, but at least you'll only get one log entry per key (closes: #630606).
2011-05-29OpenBSD CVS SyncDamien Miller
- djm@cvs.openbsd.org 2011/05/23 03:30:07 [auth-rsa.c auth.c auth.h auth2-pubkey.c monitor.c monitor_wrap.c pathnames.h servconf.c servconf.h sshd.8 sshd_config sshd_config.5] allow AuthorizedKeysFile to specify multiple files, separated by spaces. Bring back authorized_keys2 as a default search path (to avoid breaking existing users of this file), but override this in sshd_config so it will be no longer used on fresh installs. Maybe in 2015 we can remove it entierly :) feedback and ok markus@ dtucker@
2011-01-24* New upstream release (http://www.openssh.org/txt/release-5.7):Colin Watson
- Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer better performance than plain DH and DSA at the same equivalent symmetric key length, as well as much shorter keys. - sftp(1)/sftp-server(8): add a protocol extension to support a hard link operation. It is available through the "ln" command in the client. The old "ln" behaviour of creating a symlink is available using its "-s" option or through the preexisting "symlink" command. - scp(1): Add a new -3 option to scp: Copies between two remote hosts are transferred through the local host (closes: #508613). - ssh(1): "atomically" create the listening mux socket by binding it on a temporary name and then linking it into position after listen() has succeeded. This allows the mux clients to determine that the server socket is either ready or stale without races (closes: #454784). Stale server sockets are now automatically removed (closes: #523250). - ssh(1): install a SIGCHLD handler to reap expired child process (closes: #594687). - ssh(1)/ssh-agent(1): honour $TMPDIR for client xauth and ssh-agent temporary directories (closes: #357469, although only if you arrange for ssh-agent to actually see $TMPDIR since the setgid bit will cause it to be stripped off).
2010-12-05 - djm@cvs.openbsd.org 2010/12/03 23:55:27Darren Tucker
[auth-rsa.c] move check for revoked keys to run earlier (in auth_rsa_key_allowed) bz#1829; patch from ldv AT altlinux.org; ok markus@
2010-08-23* New upstream release (http://www.openssh.com/txt/release-5.6):Colin Watson
- Added a ControlPersist option to ssh_config(5) that automatically starts a background ssh(1) multiplex master when connecting. This connection can stay alive indefinitely, or can be set to automatically close after a user-specified duration of inactivity (closes: #335697, #350898, #454787, #500573, #550262). - Support AuthorizedKeysFile, AuthorizedPrincipalsFile, HostbasedUsesNameFromPacketOnly, and PermitTunnel in sshd_config(5) Match blocks (closes: #549858). - sftp(1): fix ls in working directories that contain globbing characters in their pathnames (LP: #530714).
2010-07-16 - djm@cvs.openbsd.org 2010/07/13 23:13:16Damien Miller
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c packet.c] [ssh-rsa.c] s/timing_safe_cmp/timingsafe_bcmp/g
2010-07-16 - djm@cvs.openbsd.org 2010/07/13 11:52:06Damien Miller
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c] [packet.c ssh-rsa.c] implement a timing_safe_cmp() function to compare memory without leaking timing information by short-circuiting like memcmp() and use it for some of the more sensitive comparisons (though nothing high-value was readily attackable anyway); "looks ok" markus@
2010-05-21 - djm@cvs.openbsd.org 2010/05/11 02:58:04Damien Miller
[auth-rsa.c] don't accept certificates marked as "cert-authority" here; ok markus@
2010-04-16 - djm@cvs.openbsd.org 2010/04/16 01:47:26Damien Miller
[PROTOCOL.certkeys auth-options.c auth-options.h auth-rsa.c] [auth2-pubkey.c authfd.c key.c key.h myproposal.h ssh-add.c] [ssh-agent.c ssh-dss.c ssh-keygen.1 ssh-keygen.c ssh-rsa.c] [sshconnect.c sshconnect2.c sshd.c] revised certificate format ssh-{dss,rsa}-cert-v01@openssh.com with the following changes: move the nonce field to the beginning of the certificate where it can better protect against chosen-prefix attacks on the signature hash Rename "constraints" field to "critical options" Add a new non-critical "extensions" field Add a serial number The older format is still support for authentication and cert generation (use "ssh-keygen -t v00 -s ca_key ..." to generate a v00 certificate) ok markus@
2010-03-31* New upstream release (LP: #535029).Colin Watson
- After a transition period of about 10 years, this release disables SSH protocol 1 by default. Clients and servers that need to use the legacy protocol must explicitly enable it in ssh_config / sshd_config or on the command-line. - Remove the libsectok/OpenSC-based smartcard code and add support for PKCS#11 tokens. This support is enabled by default in the Debian packaging, since it now doesn't involve additional library dependencies (closes: #231472, LP: #16918). - Add support for certificate authentication of users and hosts using a new, minimal OpenSSH certificate format (closes: #482806). - Added a 'netcat mode' to ssh(1): "ssh -W host:port ...". - Add the ability to revoke keys in sshd(8) and ssh(1). (For the Debian package, this overlaps with the key blacklisting facility added in openssh 1:4.7p1-9, but with different file formats and slightly different scopes; for the moment, I've roughly merged the two.) - Various multiplexing improvements, including support for requesting port-forwardings via the multiplex protocol (closes: #360151). - Allow setting an explicit umask on the sftp-server(8) commandline to override whatever default the user has (closes: #496843). - Many sftp client improvements, including tab-completion, more options, and recursive transfer support for get/put (LP: #33378). The old mget/mput commands never worked properly and have been removed (closes: #270399, #428082). - Do not prompt for a passphrase if we fail to open a keyfile, and log the reason why the open failed to debug (closes: #431538). - Prevent sftp from crashing when given a "-" without a command. Also, allow whitespace to follow a "-" (closes: #531561).
2010-03-04 - djm@cvs.openbsd.org 2010/03/04 10:36:03Damien Miller
[auth-rh-rsa.c auth-rsa.c auth.c auth.h auth2-hostbased.c auth2-pubkey.c] [authfile.c authfile.h hostfile.c hostfile.h servconf.c servconf.h] [ssh-keygen.c ssh.1 sshconnect.c sshd_config.5] Add a TrustedUserCAKeys option to sshd_config to specify CA keys that are trusted to authenticate users (in addition than doing it per-user in authorized_keys). Add a RevokedKeys option to sshd_config and a @revoked marker to known_hosts to allow keys to me revoked and banned for user or host authentication. feedback and ok markus@
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-07-02 - dtucker@cvs.openbsd.org 2008/07/02 12:03:51Darren Tucker
[auth-rsa.c auth.c auth2-pubkey.c auth.h] Merge duplicate host key file checks, based in part on a patch from Rob Holland via bz #1348 . Also checks for non-regular files during protocol 1 RSA auth. ok djm@
2008-05-26Refactor rejection of blacklisted user keys into a singleColin Watson
reject_blacklisted_key function in auth.c (thanks, Dmitry V. Levin).
2008-05-25Log IP addresses of hosts attempting to use blacklisted keys (closes:Colin Watson
#481721).
2008-05-25update for new blacklisted_key interfaceColin Watson
2008-05-12* Mitigate OpenSSL security vulnerability:Colin Watson
- Add key blacklisting support. Keys listed in /etc/ssh/blacklist.TYPE-LENGTH will be rejected for authentication by sshd, unless "PermitBlacklistedKeys yes" is set in /etc/ssh/sshd_config. - Add a new program, ssh-vulnkey, which can be used to check keys against these blacklists. - Depend on openssh-blacklist. - Force dependencies on libssl0.9.8 / libcrypto0.9.8-udeb to at least 0.9.8g-9. - Automatically regenerate known-compromised host keys, with a critical-priority debconf note. (I regret that there was no time to gather translations.)
2006-11-07 - markus@cvs.openbsd.org 2006/11/06 21:25:28Darren Tucker
[auth-rsa.c kexgexc.c kexdhs.c key.c ssh-dss.c sshd.c kexgexs.c ssh-keygen.c bufbn.c moduli.c scard.c kexdhc.c sshconnect1.c dh.c rsa.c] add missing checks for openssl return codes; with & ok djm@
2006-09-01 - (djm) [audit-bsm.c audit.c auth-bsdauth.c auth-chall.c auth-pam.c]Damien Miller
[auth-rsa.c auth-shadow.c auth-sia.c auth1.c auth2-chall.c] [auth2-gss.c auth2-kbdint.c auth2-none.c authfd.c authfile.c] [cipher-3des1.c cipher-aes.c cipher-bf1.c cipher-ctr.c clientloop.c] [dh.c dns.c entropy.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c loginrec.c mac.c] [md5crypt.c monitor.c monitor_wrap.c readconf.c rsa.c] [scard-opensc.c scard.c session.c ssh-add.c ssh-agent.c ssh-dss.c] [ssh-keygen.c ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c rc4.diff] [openbsd-compat/bsd-cray.c openbsd-compat/port-aix.c] [openbsd-compat/port-linux.c openbsd-compat/port-solaris.c] [openbsd-compat/port-uw.c] Lots of headers for SCO OSR6, mainly adding stdarg.h for log.h; compile problems reported by rac AT tenzing.org
2006-08-05 - deraadt@cvs.openbsd.org 2006/08/03 03:34:42Damien Miller
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c] [auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ] [auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c] [buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c] [groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c] [key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c] [monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c] [readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h] [serverloop.c session.c session.h sftp-client.c sftp-common.c] [sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c] [ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c] [uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h] [loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h] almost entirely get rid of the culture of ".h files that include .h files" ok djm, sort of ok stevesk makes the pain stop in one easy step NB. portable commit contains everything *except* removing includes.h, as that will take a fair bit more work as we move headers that are required for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-08-05 - stevesk@cvs.openbsd.org 2006/08/01 23:22:48Damien Miller
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c] [auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c] [channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c] [kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c] [monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c] [servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c] [uuencode.h xmalloc.c] move #include <stdio.h> out of includes.h
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/22 20:48:23Damien Miller
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c] [auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c] [authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c] [cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c] [compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c] [includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c] [progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c] move #include <string.h> out of includes.h
2006-07-10 - stevesk@cvs.openbsd.org 2006/07/06 16:03:53Damien Miller
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c] [auth-rhosts.c auth-rsa.c auth.c auth.h auth2-hostbased.c] [auth2-pubkey.c auth2.c includes.h misc.c misc.h monitor.c] [monitor_wrap.c monitor_wrap.h scp.c serverloop.c session.c] [session.h sftp-common.c ssh-add.c ssh-keygen.c ssh-keysign.c] [ssh.c sshconnect.c sshconnect.h sshd.c sshpty.c sshpty.h uidswap.c] [uidswap.h] move #include <pwd.h> out of includes.h; ok markus@
2006-03-26 - deraadt@cvs.openbsd.org 2006/03/25 18:29:35Damien Miller
[auth-rsa.c authfd.c packet.c] needed casts (always will be needed)
2006-03-26 - djm@cvs.openbsd.org 2006/03/25 13:17:03Damien Miller
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c] [auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c] [auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c] [auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c] [buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c] [cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c] [deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c] [kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c] [readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c] [sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c] [sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c] [uidswap.c uuencode.c xmalloc.c] Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that Theo nuked - our scripts to sync -portable need them in the files
2006-03-26 - deraadt@cvs.openbsd.org 2006/03/19 18:51:18Damien Miller
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c] [auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c] [auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c] [auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c] [canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c] [groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c] [kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c] [loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c] [nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c] [scard.c scp.c servconf.c serverloop.c session.c sftp-client.c] [sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c] [ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c] [ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c] [sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c] [uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c] [openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c] [openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c] [openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c] [openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c] RCSID() can die
2006-03-15 - stevesk@cvs.openbsd.org 2006/02/20 17:02:44Damien Miller
[clientloop.c includes.h monitor.c progressmeter.c scp.c] [serverloop.c session.c sftp.c ssh-agent.c ssh.c sshd.c] move #include <signal.h> out of includes.h; ok markus@
2005-06-17 - djm@cvs.openbsd.org 2005/06/17 02:44:33Damien Miller
[auth-rsa.c auth.c auth1.c auth2-chall.c auth2-gss.c authfd.c authfile.c] [bufaux.c canohost.c channels.c cipher.c clientloop.c dns.c gss-serv.c] [kex.c kex.h key.c mac.c match.c misc.c packet.c packet.h scp.c] [servconf.c session.c session.h sftp-client.c sftp-server.c sftp.c] [ssh-keyscan.c ssh-rsa.c sshconnect.c sshconnect1.c sshconnect2.c sshd.c] make this -Wsign-compare clean; ok avsm@ markus@ NB. auth1.c changes not committed yet (conflicts with uncommitted sync) NB2. more work may be needed to make portable Wsign-compare clean
2004-12-11 - dtucker@cvs.openbsd.org 2004/12/11 01:48:56Darren Tucker
[auth-rsa.c auth2-pubkey.c authfile.c misc.c misc.h] Fix debug call in error path of authorized_keys processing and fix related warnings; ok djm@
2004-12-06 - dtucker@cvs.openbsd.org 2004/12/06 11:41:03Darren Tucker
[auth-rsa.c auth2-pubkey.c authfile.c misc.c misc.h ssh.h sshd.8] Discard over-length authorized_keys entries rather than complaining when they don't decode. bz #884, with & ok djm@
2004-06-22 - avsm@cvs.openbsd.org 2004/06/21 17:36:31Darren Tucker
[auth-rsa.c auth2-gss.c auth2-pubkey.c authfile.c canohost.c channels.c cipher.c dns.c kex.c monitor.c monitor_fdpass.c monitor_wrap.c monitor_wrap.h nchan.c packet.c progressmeter.c scp.c sftp-server.c sftp.c ssh-gss.h ssh-keygen.c ssh.c sshconnect.c sshconnect1.c sshlogin.c sshpty.c] make ssh -Wshadow clean, no functional changes markus@ ok There are also some portable-specific -Wshadow warnings to be fixed in monitor.c and montior_wrap.c.
2004-05-13 - djm@cvs.openbsd.org 2004/05/09 01:19:28Darren Tucker
[OVERVIEW auth-rsa.c auth1.c kex.c monitor.c session.c sshconnect1.c sshd.c] removed: mpaux.c mpaux.h kill some more tiny files; ok deraadt@
2003-11-17 - djm@cvs.openbsd.org 2003/11/04 08:54:09Damien Miller
[auth1.c auth2.c auth2-pubkey.c auth.h auth-krb5.c auth-passwd.c] [auth-rhosts.c auth-rh-rsa.c auth-rsa.c monitor.c serverloop.c] [session.c] standardise arguments to auth methods - they should all take authctxt. check authctxt->valid rather then pw != NULL; ok markus@
2003-05-14 - (djm) RCSID sync w/ OpenBSDDamien Miller
2003-04-09*** empty log message ***Damien Miller
2002-06-11 - stevesk@cvs.openbsd.org 2002/06/10 16:53:06Ben Lindstrom
[auth-rsa.c ssh-rsa.c] display minimum RSA modulus in error(); ok markus@
2002-04-02 - stevesk@cvs.openbsd.org 2002/03/29 19:18:33Ben Lindstrom
[auth-rsa.c ssh-rsa.c ssh.h] make RSA modulus minimum #define; ok markus@
2002-03-27 - markus@cvs.openbsd.org 2002/03/26 23:13:03Ben Lindstrom
[auth-rsa.c] disallow RSA keys < 768 for protocol 1, too (rhosts-rsa and rsa auth)
2002-03-26 - markus@cvs.openbsd.org 2002/03/25 09:21:13Ben Lindstrom
[auth-rsa.c] return 0 (not NULL); tomh@po.crl.go.jp
2002-03-22 - provos@cvs.openbsd.org 2002/03/18 17:50:31Ben Lindstrom
[auth-bsdauth.c auth-options.c auth-rh-rsa.c auth-rsa.c auth-skey.c auth.h auth1.c auth2-chall.c auth2.c kex.c kex.h kexdh.c kexgex.c servconf.c session.h servconf.h serverloop.c session.c sshd.c] integrate privilege separated openssh; its turned off by default for now. work done by me and markus@ applied, but outside of ensure that smaller code bits migrated with their owners.. no work was tried to 'fix' it to work. =) Later project!
2002-03-22 - markus@cvs.openbsd.org 2002/03/14 16:56:33Ben Lindstrom
[auth-rh-rsa.c auth-rsa.c auth.h] split auth_rsa() for better readability and privsep; ok provos@
2002-01-22 - markus@cvs.openbsd.org 2001/12/28 14:50:54Damien Miller
[auth1.c auth-rsa.c channels.c dispatch.c kex.c kexdh.c kexgex.c packet.c packet.h serverloop.c session.c ssh.c sshconnect1.c sshconnect2.c sshd.c] packet_read* no longer return the packet length, since it's not used.
2002-01-22 - markus@cvs.openbsd.org 2001/12/27 20:39:58Damien Miller
[auth1.c auth-rsa.c channels.c clientloop.c packet.c packet.h serverloop.c session.c ssh.c sshconnect1.c sshd.c ttymodes.c] get rid of packet_integrity_check, use packet_done() instead.
2002-01-22 - markus@cvs.openbsd.org 2001/12/27 20:39:58Damien Miller
[auth1.c auth-rsa.c channels.c clientloop.c packet.c packet.h serverloop.c session.c ssh.c sshconnect1.c sshd.c ttymodes.c] get rid of packet_integrity_check, use packet_done() instead.
2002-01-22 - markus@cvs.openbsd.org 2001/12/27 18:22:16Damien Miller
[auth1.c authfile.c auth-rsa.c dh.c kexdh.c kexgex.c key.c rsa.c scard.c ssh-agent.c sshconnect1.c sshd.c ssh-dss.c] call fatal() for openssl allocation failures
2001-12-21 - jakob@cvs.openbsd.org 2001/12/18 10:06:24Damien Miller
[auth-rsa.c] log fingerprint on successful public key authentication, simplify usage of key structs; ok markus@
2001-12-06 - markus@cvs.openbsd.org 2001/11/29 22:08:48Ben Lindstrom
[auth-rsa.c] fix protocol error: send 'failed' message instead of a 2nd challenge (happens if the same key is in authorized_keys twice). reported Ralf_Meister@genua.de; ok djm@