| Age | Commit message (Collapse) | Author |
|---|
|
Move several subprocess-related functions from various
locations to misc.c. Extend subprocess() to offer a little more control over
stdio disposition.
feedback & ok dtucker@
Upstream-ID: 3573dd7109d13ef9bd3bed93a3deb170fbfce049
|
|
refactor authentication logging
optionally record successful auth methods and public credentials
used in a file accessible to user sessions
feedback and ok markus@
Upstream-ID: 090b93036967015717b9a54fd0467875ae9d32fb
|
|
switch from Key typedef with struct sshkey; ok djm@
Upstream-ID: 3067d33e04efbe5131ce8f70668c47a58e5b7a1f
|
|
allow LogLevel in sshd_config Match blocks; ok dtucker
bz#2717
Upstream-ID: 662e303be63148f47db1aa78ab81c5c2e732baa8
|
|
Add missing braces in DenyUsers code. Patch from zev at
bewilderbeest.net, ok deraadt@
Upstream-ID: d747ace338dcf943b077925f90f85f789714b54e
|
|
unbreak DenyUsers; reported by henning@
Upstream-ID: 1c67d4148f5e953c35acdb62e7c08ae8e33f7cb2
|
|
Validate address ranges for AllowUser/DenyUsers at
configuration load time and refuse to accept bad ones. It was previously
possible to specify invalid CIDR address ranges (e.g. djm@127.1.2.3/55) and
these would always match.
Thanks to Laurence Parry for a detailed bug report. ok markus (for
a previous diff version)
Upstream-ID: 9dfcdd9672b06e65233ea4434c38226680d40bfb
|
|
remove ssh1 server code; ok djm@
Upstream-ID: c24c0c32c49b91740d5a94ae914fb1898ea5f534
|
|
Remove "POSSIBLE BREAK-IN ATTEMPT!" from log message
about forward and reverse DNS not matching. We haven't supported IP-based
auth methods for a very long time so it's now misleading. part of bz#2585,
ok markus@
Upstream-ID: 5565ef0ee0599b27f0bd1d3bb1f8a323d8274e29
|
|
"refactor canohost.c" replaced get_canonical_hostname, this makes the
same change to some portable-specific code.
|
|
refactor canohost.c: move functions that cache results closer
to the places that use them (authn and session code). After this, no state is
cached in canohost.c
feedback and ok markus@
Upstream-ID: 5f2e4df88d4803fc8ec59ec53629105e23ce625e
|
|
fix inverted logic that broke PermitRootLogin; reported
by Mantas Mikulenas; ok markus@
Upstream-ID: 260dd6a904c1bb7e43267e394b1c9cf70bdd5ea5
|
|
add prohibit-password as a synonymn for without-password,
since the without-password is causing too many questions. Harden it to ban
all but pubkey, hostbased, and GSSAPI auth (when the latter is enabled) from
djm, ok markus
Upstream-ID: d53317d7b28942153e6236d3fd6e12ceb482db7a
|
|
make handling of AuthorizedPrincipalsFile=none more
consistent with other =none options; bz#2288 from Jakub Jelen; ok dtucker@
|
|
don't leak validity of user in "too many authentication
failures" disconnect message; reported by Sebastian Reitenbach
|
|
Reduce use of <sys/param.h> and transition to <limits.h>
throughout. ok djm markus
|
|
Add FingerprintHash option to control algorithm used for
key fingerprints. Default changes from MD5 to SHA256 and format from hex to
base64.
Feedback and ok naddy@ markus@
|
|
add RevokedHostKeys option for the client
Allow textfile or KRL-based revocation of hostkeys.
|
|
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
|
|
[auth.c auth.h auth1.c auth2.c]
make the "Too many authentication failures" message include the
user, source address, port and protocol in a format similar to the
authentication success / failure messages; bz#2199, ok dtucker
|
|
[auth.c authfd.c authfile.c bufaux.c cipher.c cipher.h hostfile.c]
[kex.c key.c mac.c monitor.c monitor_wrap.c myproposal.h packet.c]
[roaming_client.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c]
[ssh-pkcs11.h ssh.c sshconnect.c sshconnect2.c sshd.c]
make compiling against OpenSSL optional (make OPENSSL=no);
reduces algorithms to curve25519, aes-ctr, chacha, ed25519;
allows us to explore further options; with and ok djm
|
|
[auth.h auth.c key.c monitor.c auth-rsa.c auth2.c auth1.c key.h]
Standardise logging of supplemental information during userauth. Keys
and ruser is now logged in the auth success/failure message alongside
the local username, remote host/port and protocol in use. Certificates
contents and CA are logged too.
Pushing all logging onto a single line simplifies log analysis as it is
no longer necessary to relate information scattered across multiple log
entries. "I like it" markus@
|
|
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c
ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c
gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c
auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c
servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c
auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c
sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c
kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c
kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c
monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c
ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c
sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c
ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c
dns.c packet.c readpass.c authfd.c moduli.c]
bye, bye xfree(); ok markus@
|
|
platforms, such as Android, that lack struct passwd.pw_gecos. Report
and initial patch from Nathan Osman bz#2086; feedback tim@ ok dtucker@
|
|
in addition to root as an owner of system directories on AIX and HP-UX.
ok djm@
|
|
[auth.c]
Fix comment, from jfree.e1 at gmail
|
|
[auth.c key.c key.h ssh-keygen.1 ssh-keygen.c sshd_config.5]
[krl.c krl.h PROTOCOL.krl]
add support for Key Revocation Lists (KRLs). These are a compact way to
represent lists of revoked keys and certificates, taking as little as
a single bit of incremental cost to revoke a certificate by serial number.
KRLs are loaded via the existing RevokedKeys sshd_config option.
feedback and ok markus@
|
|
[auth.c]
use correct string in error message; from rustybsd at gmx.fr
|
|
[auth.c auth.h auth1.c auth2-chall.c auth2-gss.c auth2-jpake.c auth2.c]
[monitor.c monitor.h]
Fixes logging of partial authentication when privsep is enabled
Previously, we recorded "Failed xxx" since we reset authenticated before
calling auth_log() in auth2.c. This adds an explcit "Partial" state.
Add a "submethod" to auth_log() to report which submethod is used
for keyboard-interactive.
Fix multiple authentication when one of the methods is
keyboard-interactive.
ok markus@
|
|
[auth-rsa.c auth.c auth.h auth2-pubkey.c servconf.c servconf.h]
[sshd.c sshd_config sshd_config.5]
new sshd_config option AuthorizedKeysCommand to support fetching
authorized_keys from a command in addition to (or instead of) from
the filesystem. The command is run as the target server user unless
another specified via a new AuthorizedKeysCommandUser option.
patch originally by jchadima AT redhat.com, reworked by me; feedback
and ok markus@
|
|
- dtucker@cvs.openbsd.org 2012/05/13 01:42:32
[servconf.h servconf.c sshd.8 sshd.c auth.c sshd_config.5]
Add "Match LocalAddress" and "Match LocalPort" to sshd and adjust tests
to match. Feedback and ok djm@ markus@.
|
|
[auth.c]
Support "none" as an argument for AuthorizedPrincipalsFile to indicate
no file should be read.
|
|
[auth.c]
make secure_filename() spam debug logs less
|
|
- djm@cvs.openbsd.org 2011/05/23 03:30:07
[auth-rsa.c auth.c auth.h auth2-pubkey.c monitor.c monitor_wrap.c pathnames.h servconf.c servconf.h sshd.8 sshd_config sshd_config.5]
allow AuthorizedKeysFile to specify multiple files, separated by spaces.
Bring back authorized_keys2 as a default search path (to avoid breaking
existing users of this file), but override this in sshd_config so it will
be no longer used on fresh installs. Maybe in 2015 we can remove it
entierly :)
feedback and ok markus@ dtucker@
|
|
[auth.c auth.h auth2-pubkey.c pathnames.h servconf.c servconf.h]
remove support for authorized_keys2; it is a relic from the early days
of protocol v.2 support and has been undocumented for many years;
ok markus@
|
|
[auth.c hostfile.c hostfile.h ssh.c ssh_config.5 sshconnect.c]
[sshconnect.h sshconnect2.c]
automatically order the hostkeys requested by the client based on
which hostkeys are already recorded in known_hosts. This avoids
hostkey warnings when connecting to servers with new ECDSA keys
that are preferred by default; with markus@
|
|
[auth.c]
use strict_modes already passed as function argument over referencing
global options.strict_modes
|
|
|
|
[auth.c auth2-hostbased.c authfile.c authfile.h ssh-keysign.8]
[ssh-keysign.c ssh.c]
enable certificates for hostbased authentication, from Iain Morgan;
"looks ok" markus@
|
|
[auth.c]
queue auth debug messages for bad ownership or permissions on the user's
keyfiles. These messages will be sent after the user has successfully
authenticated (where our client will display them with LogLevel=debug).
|
|
[auth-options.c auth-options.h auth.c auth.h auth2-pubkey.c]
[key.c servconf.c servconf.h sshd.8 sshd_config.5]
add some optional indirection to matching of principal names listed
in certificates. Currently, a certificate must include the a user's name
to be accepted for authentication. This change adds the ability to
specify a list of certificate principal names that are acceptable.
When authenticating using a CA trusted through ~/.ssh/authorized_keys,
this adds a new principals="name1[,name2,...]" key option.
For CAs listed through sshd_config's TrustedCAKeys option, a new config
option "AuthorizedPrincipalsFile" specifies a per-user file containing
the list of acceptable names.
If either option is absent, the current behaviour of requiring the
username to appear in principals continues to apply.
These options are useful for role accounts, disjoint account namespaces
and "user@realm"-style naming policies in certificates.
feedback and ok markus@
|
|
it gets the passwd struct from the LAM that knows about the user which is
not necessarily the default. Patch from Alexandre Letourneau.
|
|
[auth.c]
make the warning for a revoked key louder and more noticable
|
|
[auth-rh-rsa.c auth-rsa.c auth.c auth.h auth2-hostbased.c auth2-pubkey.c]
[authfile.c authfile.h hostfile.c hostfile.h servconf.c servconf.h]
[ssh-keygen.c ssh.1 sshconnect.c sshd_config.5]
Add a TrustedUserCAKeys option to sshd_config to specify CA keys that
are trusted to authenticate users (in addition than doing it per-user
in authorized_keys).
Add a RevokedKeys option to sshd_config and a @revoked marker to
known_hosts to allow keys to me revoked and banned for user or host
authentication.
feedback and ok markus@
|
|
case from that matched in the system password database. On this
platform, passwords are stored case-insensitively, but sshd requires
exact case matching for Match blocks in sshd_config(5). Based on
a patch from vinschen AT redhat.com.
|
|
[auth.c]
unbreak ChrootDirectory+internal-sftp by skipping check for executable
shell when chrooting; reported by danh AT wzrd.com; ok dtucker@
|
|
[auth.c]
when using ChrootDirectory, make sure we test for the existence of the
user's shell inside the chroot; bz #1679, patch from alex AT rtfs.hu;
ok dtucker
|
|
- dtucker@cvs.openbsd.org 2010/01/13 00:19:04
[sshconnect.c auth.c]
Fix a couple of typos/mispellings in comments
|
|
[auth.c]
Output a debug if we can't open an existing keyfile. bz#1694, ok djm@
|
|
[auth.c]
need unistd.h for close() prototype
(ID sync only)
|
