Age | Commit message (Collapse) | Author |
|
Allow secure files (~/.ssh/config, ~/.ssh/authorized_keys, etc.) to be
group-writable, provided that the group in question contains only the file's
owner. Rejected upstream for IMO incorrect reasons (e.g. a misunderstanding
about the contents of gr->gr_mem). Given that per-user groups and umask 002
are the default setup in Debian (for good reasons - this makes operating in
setgid directories with other groups much easier), we need to permit this by
default.
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1060
Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=314347
Last-Update: 2013-09-14
Patch-Name: user-group-modes.patch
|
|
In 2008, Debian (and derived distributions such as Ubuntu) shipped an
OpenSSL package with a flawed random number generator, causing OpenSSH to
generate only a very limited set of keys which were subject to private half
precomputation. To mitigate this, this patch checks key authentications
against a blacklist of known-vulnerable keys, and adds a new ssh-vulnkey
program which can be used to explicitly check keys against that blacklist.
See CVE-2008-0166.
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1469
Last-Update: 2013-09-14
Patch-Name: ssh-vulnkey.patch
|
|
[auth.h auth.c key.c monitor.c auth-rsa.c auth2.c auth1.c key.h]
Standardise logging of supplemental information during userauth. Keys
and ruser is now logged in the auth success/failure message alongside
the local username, remote host/port and protocol in use. Certificates
contents and CA are logged too.
Pushing all logging onto a single line simplifies log analysis as it is
no longer necessary to relate information scattered across multiple log
entries. "I like it" markus@
|
|
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c
ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c
gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c
auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c
servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c
auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c
sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c
kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c
kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c
monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c
ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c
sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c
ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c
dns.c packet.c readpass.c authfd.c moduli.c]
bye, bye xfree(); ok markus@
|
|
platforms, such as Android, that lack struct passwd.pw_gecos. Report
and initial patch from Nathan Osman bz#2086; feedback tim@ ok dtucker@
|
|
in addition to root as an owner of system directories on AIX and HP-UX.
ok djm@
|
|
[auth.c]
Fix comment, from jfree.e1 at gmail
|
|
[auth.c key.c key.h ssh-keygen.1 ssh-keygen.c sshd_config.5]
[krl.c krl.h PROTOCOL.krl]
add support for Key Revocation Lists (KRLs). These are a compact way to
represent lists of revoked keys and certificates, taking as little as
a single bit of incremental cost to revoke a certificate by serial number.
KRLs are loaded via the existing RevokedKeys sshd_config option.
feedback and ok markus@
|
|
[auth.c]
use correct string in error message; from rustybsd at gmx.fr
|
|
[auth.c auth.h auth1.c auth2-chall.c auth2-gss.c auth2-jpake.c auth2.c]
[monitor.c monitor.h]
Fixes logging of partial authentication when privsep is enabled
Previously, we recorded "Failed xxx" since we reset authenticated before
calling auth_log() in auth2.c. This adds an explcit "Partial" state.
Add a "submethod" to auth_log() to report which submethod is used
for keyboard-interactive.
Fix multiple authentication when one of the methods is
keyboard-interactive.
ok markus@
|
|
[auth-rsa.c auth.c auth.h auth2-pubkey.c servconf.c servconf.h]
[sshd.c sshd_config sshd_config.5]
new sshd_config option AuthorizedKeysCommand to support fetching
authorized_keys from a command in addition to (or instead of) from
the filesystem. The command is run as the target server user unless
another specified via a new AuthorizedKeysCommandUser option.
patch originally by jchadima AT redhat.com, reworked by me; feedback
and ok markus@
|
|
- dtucker@cvs.openbsd.org 2012/05/13 01:42:32
[servconf.h servconf.c sshd.8 sshd.c auth.c sshd_config.5]
Add "Match LocalAddress" and "Match LocalPort" to sshd and adjust tests
to match. Feedback and ok djm@ markus@.
|
|
[auth.c]
Support "none" as an argument for AuthorizedPrincipalsFile to indicate
no file should be read.
|
|
[auth.c]
make secure_filename() spam debug logs less
|
|
- djm@cvs.openbsd.org 2011/05/23 03:30:07
[auth-rsa.c auth.c auth.h auth2-pubkey.c monitor.c monitor_wrap.c pathnames.h servconf.c servconf.h sshd.8 sshd_config sshd_config.5]
allow AuthorizedKeysFile to specify multiple files, separated by spaces.
Bring back authorized_keys2 as a default search path (to avoid breaking
existing users of this file), but override this in sshd_config so it will
be no longer used on fresh installs. Maybe in 2015 we can remove it
entierly :)
feedback and ok markus@ dtucker@
|
|
[auth.c auth.h auth2-pubkey.c pathnames.h servconf.c servconf.h]
remove support for authorized_keys2; it is a relic from the early days
of protocol v.2 support and has been undocumented for many years;
ok markus@
|
|
[auth.c hostfile.c hostfile.h ssh.c ssh_config.5 sshconnect.c]
[sshconnect.h sshconnect2.c]
automatically order the hostkeys requested by the client based on
which hostkeys are already recorded in known_hosts. This avoids
hostkey warnings when connecting to servers with new ECDSA keys
that are preferred by default; with markus@
|
|
[auth.c]
use strict_modes already passed as function argument over referencing
global options.strict_modes
|
|
|
|
[auth.c auth2-hostbased.c authfile.c authfile.h ssh-keysign.8]
[ssh-keysign.c ssh.c]
enable certificates for hostbased authentication, from Iain Morgan;
"looks ok" markus@
|
|
[auth.c]
queue auth debug messages for bad ownership or permissions on the user's
keyfiles. These messages will be sent after the user has successfully
authenticated (where our client will display them with LogLevel=debug).
|
|
[auth-options.c auth-options.h auth.c auth.h auth2-pubkey.c]
[key.c servconf.c servconf.h sshd.8 sshd_config.5]
add some optional indirection to matching of principal names listed
in certificates. Currently, a certificate must include the a user's name
to be accepted for authentication. This change adds the ability to
specify a list of certificate principal names that are acceptable.
When authenticating using a CA trusted through ~/.ssh/authorized_keys,
this adds a new principals="name1[,name2,...]" key option.
For CAs listed through sshd_config's TrustedCAKeys option, a new config
option "AuthorizedPrincipalsFile" specifies a per-user file containing
the list of acceptable names.
If either option is absent, the current behaviour of requiring the
username to appear in principals continues to apply.
These options are useful for role accounts, disjoint account namespaces
and "user@realm"-style naming policies in certificates.
feedback and ok markus@
|
|
it gets the passwd struct from the LAM that knows about the user which is
not necessarily the default. Patch from Alexandre Letourneau.
|
|
[auth.c]
make the warning for a revoked key louder and more noticable
|
|
[auth-rh-rsa.c auth-rsa.c auth.c auth.h auth2-hostbased.c auth2-pubkey.c]
[authfile.c authfile.h hostfile.c hostfile.h servconf.c servconf.h]
[ssh-keygen.c ssh.1 sshconnect.c sshd_config.5]
Add a TrustedUserCAKeys option to sshd_config to specify CA keys that
are trusted to authenticate users (in addition than doing it per-user
in authorized_keys).
Add a RevokedKeys option to sshd_config and a @revoked marker to
known_hosts to allow keys to me revoked and banned for user or host
authentication.
feedback and ok markus@
|
|
case from that matched in the system password database. On this
platform, passwords are stored case-insensitively, but sshd requires
exact case matching for Match blocks in sshd_config(5). Based on
a patch from vinschen AT redhat.com.
|
|
[auth.c]
unbreak ChrootDirectory+internal-sftp by skipping check for executable
shell when chrooting; reported by danh AT wzrd.com; ok dtucker@
|
|
[auth.c]
when using ChrootDirectory, make sure we test for the existence of the
user's shell inside the chroot; bz #1679, patch from alex AT rtfs.hu;
ok dtucker
|
|
- dtucker@cvs.openbsd.org 2010/01/13 00:19:04
[sshconnect.c auth.c]
Fix a couple of typos/mispellings in comments
|
|
[auth.c]
Output a debug if we can't open an existing keyfile. bz#1694, ok djm@
|
|
[auth.c]
need unistd.h for close() prototype
(ID sync only)
|
|
|
|
passwords disabled. bz#1083 report & patch from senthilkumar_sen AT
hotpop.com, w/ dtucker@
|
|
[auth-rsa.c auth.c auth2-pubkey.c auth.h]
Merge duplicate host key file checks, based in part on a patch from Rob
Holland via bz #1348 . Also checks for non-regular files during protocol
1 RSA auth. ok djm@
|
|
[auth-bsdauth.c auth-passwd.c auth.c auth.h auth1.c auth2-chall.c]
[monitor.c monitor_wrap.c]
unifdef -DBSD_AUTH
unifdef -USKEY
These options have been in use for some years;
ok markus@ "no objection" millert@
(NB. RCD ID sync only for portable)
|
|
[auth-passwd.c auth.c session.c]
missed include bits from last commit
NB. RCS ID sync only for portable
|
|
[auth-passwd.c auth.c session.c]
unifdef HAVE_LOGIN_CAP; ok deraadt@ millert@
NB. RCS ID sync only for portable
|
|
- (tim) [auth.c configure.ac defines.h session.c openbsd-compat/port-uw.c
openbsd-compat/port-uw.h openbsd-compat/xcrypt.c] Rework libiaf test/defines
to account for IRIX having libiaf but not set_id(). Patch with & ok dtucker@
|
|
occur if the server did not have the privsep user and an invalid user
tried to login and both privsep and krb5 auth are disabled.
|
|
|
|
be used to drop privilege to; fixes Solaris GSSAPI crash reported by
Magnus Abrante; suggestion and feedback dtucker@
NB. this change will require that the privilege separation user must
exist on all the time, not just when UsePrivilegeSeparation=yes
|
|
loginsuccess on AIX immediately after authentication to clear the failed
login count. Previously this would only happen when an interactive
session starts (ie when a pty is allocated) but this means that accounts
that have primarily non-interactive sessions (eg scp's) may gradually
accumulate enough failures to lock out an account. This change may have
a side effect of creating two audit records, one with a tty of "ssh"
corresponding to the authentication and one with the allocated pty per
interactive session.
|
|
|
|
remove last traces of bufaux.h - it was merged into buffer.h in the big
includes.h commit
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c]
[auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c]
[channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c]
[kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c]
[monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c]
[servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c]
[sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c]
[uuencode.h xmalloc.c]
move #include <stdio.h> out of includes.h
|
|
[atomicio.c auth.c dh.c authfile.c buffer.c clientloop.c kex.c]
[groupaccess.c gss-genr.c kexgexs.c misc.c monitor.c monitor_mm.c]
[packet.c scp.c serverloop.c session.c sftp-client.c sftp-common.c]
[sftp-server.c sftp.c ssh-add.c ssh-agent.c ssh-keygen.c sshlogin.c]
[uidswap.c xmalloc.c]
move #include <sys/param.h> out of includes.h
|
|
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c]
[auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c]
[authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c]
[cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c]
[compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c]
[includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c]
[progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c]
move #include <string.h> out of includes.h
|
|
[sshd.c servconf.h servconf.c sshd_config.5 auth.c]
Add support for conditional directives to sshd_config via a "Match"
keyword, which works similarly to the "Host" directive in ssh_config.
Lines after a Match line override the default set in the main section
if the condition on the Match line is true, eg
AllowTcpForwarding yes
Match User anoncvs
AllowTcpForwarding no
will allow port forwarding by all users except "anoncvs".
Currently only a very small subset of directives are supported.
ok djm@
|
|
[scp.c auth.c monitor.c serverloop.c sftp-server.c sshpty.c readpass.c
sshd.c monitor_wrap.c monitor_fdpass.c ssh-agent.c ttymodes.c atomicio.c
includes.h session.c sshlogin.c monitor_mm.c packet.c sshconnect2.c
sftp-client.c nchan.c clientloop.c sftp.c misc.c canohost.c channels.c
ssh-keygen.c progressmeter.c uidswap.c msg.c readconf.c sshconnect.c]
move #include <errno.h> out of includes.h; ok markus@
|