| Age | Commit message (Collapse) | Author |
|---|
|
[auth.c]
need unistd.h for close() prototype
(ID sync only)
|
|
|
|
passwords disabled. bz#1083 report & patch from senthilkumar_sen AT
hotpop.com, w/ dtucker@
|
|
[auth-rsa.c auth.c auth2-pubkey.c auth.h]
Merge duplicate host key file checks, based in part on a patch from Rob
Holland via bz #1348 . Also checks for non-regular files during protocol
1 RSA auth. ok djm@
|
|
[auth-bsdauth.c auth-passwd.c auth.c auth.h auth1.c auth2-chall.c]
[monitor.c monitor_wrap.c]
unifdef -DBSD_AUTH
unifdef -USKEY
These options have been in use for some years;
ok markus@ "no objection" millert@
(NB. RCD ID sync only for portable)
|
|
[auth-passwd.c auth.c session.c]
missed include bits from last commit
NB. RCS ID sync only for portable
|
|
[auth-passwd.c auth.c session.c]
unifdef HAVE_LOGIN_CAP; ok deraadt@ millert@
NB. RCS ID sync only for portable
|
|
- (tim) [auth.c configure.ac defines.h session.c openbsd-compat/port-uw.c
openbsd-compat/port-uw.h openbsd-compat/xcrypt.c] Rework libiaf test/defines
to account for IRIX having libiaf but not set_id(). Patch with & ok dtucker@
|
|
occur if the server did not have the privsep user and an invalid user
tried to login and both privsep and krb5 auth are disabled.
|
|
|
|
be used to drop privilege to; fixes Solaris GSSAPI crash reported by
Magnus Abrante; suggestion and feedback dtucker@
NB. this change will require that the privilege separation user must
exist on all the time, not just when UsePrivilegeSeparation=yes
|
|
loginsuccess on AIX immediately after authentication to clear the failed
login count. Previously this would only happen when an interactive
session starts (ie when a pty is allocated) but this means that accounts
that have primarily non-interactive sessions (eg scp's) may gradually
accumulate enough failures to lock out an account. This change may have
a side effect of creating two audit records, one with a tty of "ssh"
corresponding to the authentication and one with the allocated pty per
interactive session.
|
|
|
|
remove last traces of bufaux.h - it was merged into buffer.h in the big
includes.h commit
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c]
[auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c]
[channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c]
[kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c]
[monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c]
[servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c]
[sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c]
[uuencode.h xmalloc.c]
move #include <stdio.h> out of includes.h
|
|
[atomicio.c auth.c dh.c authfile.c buffer.c clientloop.c kex.c]
[groupaccess.c gss-genr.c kexgexs.c misc.c monitor.c monitor_mm.c]
[packet.c scp.c serverloop.c session.c sftp-client.c sftp-common.c]
[sftp-server.c sftp.c ssh-add.c ssh-agent.c ssh-keygen.c sshlogin.c]
[uidswap.c xmalloc.c]
move #include <sys/param.h> out of includes.h
|
|
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c]
[auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c]
[authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c]
[cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c]
[compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c]
[includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c]
[progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c]
move #include <string.h> out of includes.h
|
|
[sshd.c servconf.h servconf.c sshd_config.5 auth.c]
Add support for conditional directives to sshd_config via a "Match"
keyword, which works similarly to the "Host" directive in ssh_config.
Lines after a Match line override the default set in the main section
if the condition on the Match line is true, eg
AllowTcpForwarding yes
Match User anoncvs
AllowTcpForwarding no
will allow port forwarding by all users except "anoncvs".
Currently only a very small subset of directives are supported.
ok djm@
|
|
[scp.c auth.c monitor.c serverloop.c sftp-server.c sshpty.c readpass.c
sshd.c monitor_wrap.c monitor_fdpass.c ssh-agent.c ttymodes.c atomicio.c
includes.h session.c sshlogin.c monitor_mm.c packet.c sshconnect2.c
sftp-client.c nchan.c clientloop.c sftp.c misc.c canohost.c channels.c
ssh-keygen.c progressmeter.c uidswap.c msg.c readconf.c sshconnect.c]
move #include <errno.h> out of includes.h; ok markus@
|
|
[readpass.c log.h scp.c fatal.c xmalloc.c includes.h ssh-keyscan.c misc.c
auth.c packet.c log.c]
move #include <stdarg.h> out of includes.h; ok markus@
|
|
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c]
[auth-rhosts.c auth-rsa.c auth.c auth.h auth2-hostbased.c]
[auth2-pubkey.c auth2.c includes.h misc.c misc.h monitor.c]
[monitor_wrap.c monitor_wrap.h scp.c serverloop.c session.c]
[session.h sftp-common.c ssh-add.c ssh-keygen.c ssh-keysign.c]
[ssh.c sshconnect.c sshconnect.h sshd.c sshpty.c sshpty.h uidswap.c]
[uidswap.h]
move #include <pwd.h> out of includes.h; ok markus@
|
|
and slave, we can remove the special-case handling in the audit hook in
auth_log.
|
|
[auth.c monitor.c]
Prevent duplicate log messages when privsep=yes; ok djm@
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c]
[auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c]
[auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c]
[buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c]
[cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c]
[deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c]
[kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c]
[readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c]
[sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c]
Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that
Theo nuked - our scripts to sync -portable need them in the files
|
|
[auth-bsdauth.c auth-skey.c auth.c auth2-chall.c channels.c]
[clientloop.c deattack.c gss-genr.c kex.c key.c misc.c moduli.c]
[monitor.c monitor_wrap.c packet.c scard.c sftp-server.c ssh-agent.c]
[ssh-keyscan.c ssh.c sshconnect.c sshconnect2.c sshd.c uuencode.c]
[xmalloc.c xmalloc.h]
introduce xcalloc() and xasprintf() failure-checked allocations
functions and use them throughout openssh
xcalloc is particularly important because malloc(nmemb * size) is a
dangerous idiom (subject to integer overflow) and it is time for it
to die
feedback and ok deraadt@
|
|
[auth.c key.c misc.c packet.c ssh-add.c]
in a switch (), break after return or goto is stupid
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c]
[auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c]
[auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c]
[auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c]
[canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c]
[groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c]
[kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c]
[loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c]
[nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c]
[scard.c scp.c servconf.c serverloop.c session.c sftp-client.c]
[sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c]
[ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c]
[ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c]
[openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c]
[openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c]
[openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c]
[openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c]
RCSID() can die
|
|
[clientloop.c includes.h monitor.c progressmeter.c scp.c]
[serverloop.c session.c sftp.c ssh-agent.c ssh.c sshd.c]
move #include <signal.h> out of includes.h; ok markus@
|
|
|
|
[auth.c clientloop.c includes.h misc.c monitor.c readpass.c]
[session.c sftp.c ssh-agent.c ssh-keysign.c ssh.c sshconnect.c]
[sshd.c sshpty.c]
move #include <paths.h> out of includes.h; ok markus@
|
|
openbsd-compat/port-uw.h openbsd-compat/xcrypt.c] libiaf cleanup. Disable
libiaf bits for OpenServer6. Free memory allocated by ia_get_logpwd().
Feedback and OK dtucker@
|
|
openbsd-compat/Makefile.in openbsd-compat/openbsd-compat.h
openbsd-compat/xcrypt.c] New files [openssh/openbsd-compat/port-uw.c
openssh/openbsd-compat/port-uw.h] Support long passwords (> 8-char)
on UnixWare 7 from Dhiraj Gulati and Ahsan Rashid. Cleanup and testing
by tim@. Feedback and OK dtucker@
|
|
[auth-rsa.c auth.c auth1.c auth2-chall.c auth2-gss.c authfd.c authfile.c]
[bufaux.c canohost.c channels.c cipher.c clientloop.c dns.c gss-serv.c]
[kex.c kex.h key.c mac.c match.c misc.c packet.c packet.h scp.c]
[servconf.c session.c session.h sftp-client.c sftp-server.c sftp.c]
[ssh-keyscan.c ssh-rsa.c sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
make this -Wsign-compare clean; ok avsm@ markus@
NB. auth1.c changes not committed yet (conflicts with uncommitted sync)
NB2. more work may be needed to make portable Wsign-compare clean
|
|
[auth.c auth.h misc.c misc.h ssh.c ssh_config.5 sshconnect.c]
introduce a generic %foo expansion function. replace existing % expansion
and add expansion to ControlPath; ok markus@
|
|
[auth.c]
Populate host for log message for logins denied by AllowUsers and
DenyUsers (bz #999); ok markus@
|
|
openbsd-compat/port-aix.c openbsd-compat/port-aix.h] Bug #835: enable IPv6
on AIX where possible (see README.platform for details) and work around
a misfeature of AIX's getnameinfo. ok djm@
|
|
monitor_wrap.c monitor_wrap.h session.c sshd.c]: Prepend all of the audit
defines and enums with SSH_ to prevent namespace collisions on some
platforms (eg AIX).
|
|
|
|
monitor.h monitor_wrap.c monitor_wrap.h session.c sshd.c] Bug #125:
(first stage) Add audit instrumentation to sshd, currently disabled by
default. with suggestions from and djm@
|
|
Bug #974: Teach sshd to write failed login records to btmp for failed auth
attempts (currently only for password, kbdint and C/R, only on Linux and
HP-UX), based on code from login.c from util-linux. With ashok_kovai at
hotmail.com, ok djm@
|
|
Make record_failed_login() call provide hostname rather than having the
implementations having to do lookups themselves. Only affects AIX and
UNICOS (the latter only uses the "user" parameter anyway). ok djm@
|
|
[auth.c]
Log source of connections denied by AllowUsers, DenyUsers, AllowGroups and
DenyGroups. bz #909, ok djm@
|
|
[auth.c auth1.c auth2.c cipher.c cipher.h key.c session.c ssh.c
sshconnect1.c]
more s/illegal/invalid/
|
|
- markus@cvs.openbsd.org 2004/07/21 08:56:12
[auth.c]
s/Illegal user/Invalid user/; many requests; ok djm, millert, niklas,
miod, ...
|
|
Move loginrestrictions test to port-aix.c, replace with a generic hook.
|
|
[auth.c auth.h auth1.c auth2.c servconf.c servconf.h sshd_config sshd_config.5]
Add MaxAuthTries sshd config option; ok markus@
|
|
[auth.c auth2-none.c authfile.c channels.c monitor.c monitor_mm.c
packet.c packet.h progressmeter.c session.c openbsd-compat/xmmap.c]
improve some code lint did not like; djm millert ok
|
|
[auth.c clientloop.c misc.h servconf.c ssh.c sshpty.h sshtty.c
tildexpand.c], removed: sshtty.h tildexpand.h
make two tiny header files go away; djm ok
|
|
to auth-shadow.c, no functional change. ok djm@
|
