summaryrefslogtreecommitdiff
path: root/auth.h
AgeCommit message (Collapse)Author
2013-09-14* New upstream release (http://www.openssh.com/txt/release-6.3).Colin Watson
- sftp(1): add support for resuming partial downloads using the "reget" command and on the sftp commandline or on the "get" commandline using the "-a" (append) option (closes: #158590). - ssh(1): add an "IgnoreUnknown" configuration option to selectively suppress errors arising from unknown configuration directives (closes: #436052). - sftp(1): update progressmeter when data is acknowledged, not when it's sent (partially addresses #708372). - ssh(1): do not fatally exit when attempting to cleanup multiplexing- created channels that are incompletely opened (closes: #651357).
2013-07-20 - markus@cvs.openbsd.org 2013/07/19 07:37:48Damien Miller
[auth.h kex.h kexdhs.c kexecdhs.c kexgexs.c monitor.c servconf.c] [servconf.h session.c sshd.c sshd_config.5] add ssh-agent(1) support to sshd(8); allows encrypted hostkeys, or hostkeys on smartcards; most of the work by Zev Weiss; bz #1974 ok djm@
2013-07-18 - djm@cvs.openbsd.org 2013/06/21 00:34:49Damien Miller
[auth-rsa.c auth.h auth2-hostbased.c auth2-pubkey.c monitor.c] for hostbased authentication, print the client host and user on the auth success/failure line; bz#2064, ok dtucker@
2013-06-02 - djm@cvs.openbsd.org 2013/05/19 02:42:42Darren Tucker
[auth.h auth.c key.c monitor.c auth-rsa.c auth2.c auth1.c key.h] Standardise logging of supplemental information during userauth. Keys and ruser is now logged in the auth success/failure message alongside the local username, remote host/port and protocol in use. Certificates contents and CA are logged too. Pushing all logging onto a single line simplifies log analysis as it is no longer necessary to relate information scattered across multiple log entries. "I like it" markus@
2013-05-07* New upstream release (http://www.openssh.com/txt/release-6.2).Colin Watson
- Add support for multiple required authentication in SSH protocol 2 via an AuthenticationMethods option (closes: #195716). - Fix Sophie Germain formula in moduli(5) (closes: #698612). - Update ssh-copy-id to Phil Hands' greatly revised version (closes: #99785, #322228, #620428; LP: #518883, #835901, #1074798).
2013-04-23 - markus@cvs.openbsd.org 2013/03/07 19:27:25Damien Miller
[auth.h auth2-chall.c auth2.c monitor.c sshd_config.5] add submethod support to AuthenticationMethods; ok and freedback djm@
2012-12-03 - djm@cvs.openbsd.org 2012/12/02 20:34:10Damien Miller
[auth.c auth.h auth1.c auth2-chall.c auth2-gss.c auth2-jpake.c auth2.c] [monitor.c monitor.h] Fixes logging of partial authentication when privsep is enabled Previously, we recorded "Failed xxx" since we reset authenticated before calling auth_log() in auth2.c. This adds an explcit "Partial" state. Add a "submethod" to auth_log() to report which submethod is used for keyboard-interactive. Fix multiple authentication when one of the methods is keyboard-interactive. ok markus@
2012-11-04 - djm@cvs.openbsd.org 2012/11/04 11:09:15Damien Miller
[auth.h auth1.c auth2.c monitor.c servconf.c servconf.h sshd.c] [sshd_config.5] Support multiple required authentication via an AuthenticationMethods option. This option lists one or more comma-separated lists of authentication method names. Successful completion of all the methods in any list is required for authentication to complete; feedback and ok markus@
2012-10-31 - djm@cvs.openbsd.org 2012/10/30 21:29:55Damien Miller
[auth-rsa.c auth.c auth.h auth2-pubkey.c servconf.c servconf.h] [sshd.c sshd_config sshd_config.5] new sshd_config option AuthorizedKeysCommand to support fetching authorized_keys from a command in addition to (or instead of) from the filesystem. The command is run as the target server user unless another specified via a new AuthorizedKeysCommandUser option. patch originally by jchadima AT redhat.com, reworked by me; feedback and ok markus@
2011-09-06* New upstream release (http://www.openssh.org/txt/release-5.9).Colin Watson
- Introduce sandboxing of the pre-auth privsep child using an optional sshd_config(5) "UsePrivilegeSeparation=sandbox" mode that enables mandatory restrictions on the syscalls the privsep child can perform. - Add new SHA256-based HMAC transport integrity modes from http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt. - The pre-authentication sshd(8) privilege separation slave process now logs via a socket shared with the master process, avoiding the need to maintain /dev/log inside the chroot (closes: #75043, #429243, #599240). - ssh(1) now warns when a server refuses X11 forwarding (closes: #504757). - sshd_config(5)'s AuthorizedKeysFile now accepts multiple paths, separated by whitespace (closes: #76312). The authorized_keys2 fallback is deprecated but documented (closes: #560156). - ssh(1) and sshd(8): set IPv6 traffic class from IPQoS, as well as IPv4 ToS/DSCP (closes: #498297). - ssh-add(1) now accepts keys piped from standard input. E.g. "ssh-add - < /path/to/key" (closes: #229124). - Clean up lost-passphrase text in ssh-keygen(1) (closes: #444691). - Say "required" rather than "recommended" in unprotected-private-key warning (LP: #663455).
2011-05-29OpenBSD CVS SyncDamien Miller
- djm@cvs.openbsd.org 2011/05/23 03:30:07 [auth-rsa.c auth.c auth.h auth2-pubkey.c monitor.c monitor_wrap.c pathnames.h servconf.c servconf.h sshd.8 sshd_config sshd_config.5] allow AuthorizedKeysFile to specify multiple files, separated by spaces. Bring back authorized_keys2 as a default search path (to avoid breaking existing users of this file), but override this in sshd_config so it will be no longer used on fresh installs. Maybe in 2015 we can remove it entierly :) feedback and ok markus@ dtucker@
2011-05-15 - djm@cvs.openbsd.org 2011/05/11 04:47:06Damien Miller
[auth.c auth.h auth2-pubkey.c pathnames.h servconf.c servconf.h] remove support for authorized_keys2; it is a relic from the early days of protocol v.2 support and has been undocumented for many years; ok markus@
2011-05-05 - djm@cvs.openbsd.org 2011/03/10 11:34:25Damien Miller
[auth.h] allow GSSAPI authentication to detect when a server-side failure causes authentication failure and don't count such failures against MaxAuthTries; bz#1244 from simon AT sxw.org.uk; ok markus@ before lock
2010-08-23* New upstream release (http://www.openssh.com/txt/release-5.6):Colin Watson
- Added a ControlPersist option to ssh_config(5) that automatically starts a background ssh(1) multiplex master when connecting. This connection can stay alive indefinitely, or can be set to automatically close after a user-specified duration of inactivity (closes: #335697, #350898, #454787, #500573, #550262). - Support AuthorizedKeysFile, AuthorizedPrincipalsFile, HostbasedUsesNameFromPacketOnly, and PermitTunnel in sshd_config(5) Match blocks (closes: #549858). - sftp(1): fix ls in working directories that contain globbing characters in their pathnames (LP: #530714).
2010-08-23merge 5.6p1Colin Watson
2010-05-10 - djm@cvs.openbsd.org 2010/05/07 11:30:30Damien Miller
[auth-options.c auth-options.h auth.c auth.h auth2-pubkey.c] [key.c servconf.c servconf.h sshd.8 sshd_config.5] add some optional indirection to matching of principal names listed in certificates. Currently, a certificate must include the a user's name to be accepted for authentication. This change adds the ability to specify a list of certificate principal names that are acceptable. When authenticating using a CA trusted through ~/.ssh/authorized_keys, this adds a new principals="name1[,name2,...]" key option. For CAs listed through sshd_config's TrustedCAKeys option, a new config option "AuthorizedPrincipalsFile" specifies a per-user file containing the list of acceptable names. If either option is absent, the current behaviour of requiring the username to appear in principals continues to apply. These options are useful for role accounts, disjoint account namespaces and "user@realm"-style naming policies in certificates. feedback and ok markus@
2010-03-31* New upstream release (LP: #535029).Colin Watson
- After a transition period of about 10 years, this release disables SSH protocol 1 by default. Clients and servers that need to use the legacy protocol must explicitly enable it in ssh_config / sshd_config or on the command-line. - Remove the libsectok/OpenSC-based smartcard code and add support for PKCS#11 tokens. This support is enabled by default in the Debian packaging, since it now doesn't involve additional library dependencies (closes: #231472, LP: #16918). - Add support for certificate authentication of users and hosts using a new, minimal OpenSSH certificate format (closes: #482806). - Added a 'netcat mode' to ssh(1): "ssh -W host:port ...". - Add the ability to revoke keys in sshd(8) and ssh(1). (For the Debian package, this overlaps with the key blacklisting facility added in openssh 1:4.7p1-9, but with different file formats and slightly different scopes; for the moment, I've roughly merged the two.) - Various multiplexing improvements, including support for requesting port-forwardings via the multiplex protocol (closes: #360151). - Allow setting an explicit umask on the sftp-server(8) commandline to override whatever default the user has (closes: #496843). - Many sftp client improvements, including tab-completion, more options, and recursive transfer support for get/put (LP: #33378). The old mget/mput commands never worked properly and have been removed (closes: #270399, #428082). - Do not prompt for a passphrase if we fail to open a keyfile, and log the reason why the open failed to debug (closes: #431538). - Prevent sftp from crashing when given a "-" without a command. Also, allow whitespace to follow a "-" (closes: #531561).
2010-03-31merge 5.4p1Colin Watson
2010-03-04 - djm@cvs.openbsd.org 2010/03/04 10:36:03Damien Miller
[auth-rh-rsa.c auth-rsa.c auth.c auth.h auth2-hostbased.c auth2-pubkey.c] [authfile.c authfile.h hostfile.c hostfile.h servconf.c servconf.h] [ssh-keygen.c ssh.1 sshconnect.c sshd_config.5] Add a TrustedUserCAKeys option to sshd_config to specify CA keys that are trusted to authenticate users (in addition than doing it per-user in authorized_keys). Add a RevokedKeys option to sshd_config and a @revoked marker to known_hosts to allow keys to me revoked and banned for user or host authentication. feedback and ok markus@
2010-02-27 - OpenBSD CVS SyncDamien Miller
- djm@cvs.openbsd.org 2010/02/26 20:29:54 [PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c] [auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c] [hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c] [myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c] [ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c] [sshconnect2.c sshd.8 sshd.c sshd_config.5] Add support for certificate key types for users and hosts. OpenSSH certificate key types are not X.509 certificates, but a much simpler format that encodes a public key, identity information and some validity constraints and signs it with a CA key. CA keys are regular SSH keys. This certificate style avoids the attack surface of X.509 certificates and is very easy to deploy. Certified host keys allow automatic acceptance of new host keys when a CA certificate is marked as sh/known_hosts. see VERIFYING HOST KEYS in ssh(1) for details. Certified user keys allow authentication of users when the signing CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS FILE FORMAT" in sshd(8) for details. Certificates are minted using ssh-keygen(1), documentation is in the "CERTIFICATES" section of that manpage. Documentation on the format of certificates is in the file PROTOCOL.certkeys feedback and ok markus@
2010-01-01* New upstream release (closes: #536182). Yes, I know 5.3p1 has been outColin Watson
for a while, but there's no GSSAPI patch available for it yet. - Change the default cipher order to prefer the AES CTR modes and the revised "arcfour256" mode to CBC mode ciphers that are susceptible to CPNI-957037 "Plaintext Recovery Attack Against SSH". - Add countermeasures to mitigate CPNI-957037-style attacks against the SSH protocol's use of CBC-mode ciphers. Upon detection of an invalid packet length or Message Authentication Code, ssh/sshd will continue reading up to the maximum supported packet length rather than immediately terminating the connection. This eliminates most of the known differences in behaviour that leaked information about the plaintext of injected data which formed the basis of this attack (closes: #506115, LP: #379329). - ForceCommand directive now accepts commandline arguments for the internal-sftp server (closes: #524423, LP: #362511). - Add AllowAgentForwarding to available Match keywords list (closes: #540623). - Make ssh(1) send the correct channel number for SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE messages to avoid triggering 'Non-public channel' error messages on sshd(8) in openssh-5.1. - Avoid printing 'Non-public channel' warnings in sshd(8), since the ssh(1) has sent incorrect channel numbers since ~2004 (this reverts a behaviour introduced in openssh-5.1; closes: #496017). * Update to GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-5.2p1-gsskex-all-20090726.patch, including cascading credentials support (LP: #416958).
2010-01-01import openssh-5.2p1-gsskex-all-20090726.patchColin Watson
2009-12-29import openssh-5.1p1-gsskex-cjwatson-20080722.patchColin Watson
2009-12-29import openssh-4.6p1-gsskex-20070312.patchColin Watson
2009-12-29import openssh-4.2p1-gsskex-20050926-2.patchColin Watson
2009-10-07 - fgsch@cvs.openbsd.org 2009/08/15 18:56:34Darren Tucker
[auth.h] remove unused define. markus@ ok. (Id sync only, Portable still uses this.)
2008-11-05 - djm@cvs.openbsd.org 2008/11/04 08:22:13Damien Miller
[auth.h auth2.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h] [readconf.c readconf.h servconf.c servconf.h ssh2.h ssh_config.5] [sshconnect2.c sshd_config.5 jpake.c jpake.h schnorr.c auth2-jpake.c] [Makefile.in] Add support for an experimental zero-knowledge password authentication method using the J-PAKE protocol described in F. Hao, P. Ryan, "Password Authenticated Key Exchange by Juggling", 16th Workshop on Security Protocols, Cambridge, April 2008. This method allows password-based authentication without exposing the password to the server. Instead, the client and server exchange cryptographic proofs to demonstrate of knowledge of the password while revealing nothing useful to an attacker or compromised endpoint. This is experimental, work-in-progress code and is presently compiled-time disabled (turn on -DJPAKE in Makefile.inc). "just commit it. It isn't too intrusive." deraadt@
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-07-02 - dtucker@cvs.openbsd.org 2008/07/02 12:03:51Darren Tucker
[auth-rsa.c auth.c auth2-pubkey.c auth.h] Merge duplicate host key file checks, based in part on a patch from Rob Holland via bz #1348 . Also checks for non-regular files during protocol 1 RSA auth. ok djm@
2008-05-26Refactor rejection of blacklisted user keys into a singleColin Watson
reject_blacklisted_key function in auth.c (thanks, Dmitry V. Levin).
2007-10-26 - djm@cvs.openbsd.org 2007/09/21 08:15:29Damien Miller
[auth-bsdauth.c auth-passwd.c auth.c auth.h auth1.c auth2-chall.c] [monitor.c monitor_wrap.c] unifdef -DBSD_AUTH unifdef -USKEY These options have been in use for some years; ok markus@ "no objection" millert@ (NB. RCD ID sync only for portable)
2007-09-17 - djm@cvs.openbsd.org 2007/08/23 03:06:10Damien Miller
[auth.h] login_cap.h doesn't belong here NB. RCS ID sync only for portable
2007-06-12* New upstream release (closes: #395507, #397961, #420035). ImportantColin Watson
changes not previously backported to 4.3p2: - 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4): + On portable OpenSSH, fix a GSSAPI authentication abort that could be used to determine the validity of usernames on some platforms. + Implemented conditional configuration in sshd_config(5) using the "Match" directive. This allows some configuration options to be selectively overridden if specific criteria (based on user, group, hostname and/or address) are met. So far a useful subset of post-authentication options are supported and more are expected to be added in future releases. + Add support for Diffie-Hellman group exchange key agreement with a final hash of SHA256. + Added a "ForceCommand" directive to sshd_config(5). Similar to the command="..." option accepted in ~/.ssh/authorized_keys, this forces the execution of the specified command regardless of what the user requested. This is very useful in conjunction with the new "Match" option. + Add a "PermitOpen" directive to sshd_config(5). This mirrors the permitopen="..." authorized_keys option, allowing fine-grained control over the port-forwardings that a user is allowed to establish. + Add optional logging of transactions to sftp-server(8). + ssh(1) will now record port numbers for hosts stored in ~/.ssh/known_hosts when a non-standard port has been requested (closes: #50612). + Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a non-zero exit code) when requested port forwardings could not be established. + Extend sshd_config(5) "SubSystem" declarations to allow the specification of command-line arguments. + Replacement of all integer overflow susceptible invocations of malloc(3) and realloc(3) with overflow-checking equivalents. + Many manpage fixes and improvements. + Add optional support for OpenSSL hardware accelerators (engines), enabled using the --with-ssl-engine configure option. + Tokens in configuration files may be double-quoted in order to contain spaces (closes: #319639). + Move a debug() call out of a SIGCHLD handler, fixing a hang when the session exits very quickly (closes: #307890). + Fix some incorrect buffer allocation calculations (closes: #410599). + ssh-add doesn't ask for a passphrase if key file permissions are too liberal (closes: #103677). + Likewise, ssh doesn't ask either (closes: #99675). - 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6): + sshd now allows the enabling and disabling of authentication methods on a per user, group, host and network basis via the Match directive in sshd_config. + Fixed an inconsistent check for a terminal when displaying scp progress meter (closes: #257524). + Fix "hang on exit" when background processes are running at the time of exit on a ttyful/login session (closes: #88337). * Update to current GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch; install ChangeLog.gssapi.
2006-09-29 - CVE-2006-5051: Fix an unsafe signal hander reported by Mark Dowd. TheColin Watson
signal handler was vulnerable to a race condition that could be exploited to perform a pre-authentication denial of service. On portable OpenSSH, this vulnerability could theoretically lead to pre-authentication remote code execution if GSSAPI authentication is enabled, but the likelihood of successful exploitation appears remote.
2006-08-19 - markus@cvs.openbsd.org 2006/08/18 09:15:20Damien Miller
[auth.h session.c sshd.c] delay authentication related cleanups until we're authenticated and all alarms have been cancelled; ok deraadt
2006-08-05 - deraadt@cvs.openbsd.org 2006/08/03 03:34:42Damien Miller
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c] [auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ] [auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c] [buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c] [groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c] [key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c] [monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c] [readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h] [serverloop.c session.c session.h sftp-client.c sftp-common.c] [sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c] [ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c] [uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h] [loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h] almost entirely get rid of the culture of ".h files that include .h files" ok djm, sort of ok stevesk makes the pain stop in one easy step NB. portable commit contains everything *except* removing includes.h, as that will take a fair bit more work as we move headers that are required for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-08-05 - stevesk@cvs.openbsd.org 2006/08/01 23:22:48Damien Miller
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c] [auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c] [channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c] [kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c] [monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c] [servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c] [uuencode.h xmalloc.c] move #include <stdio.h> out of includes.h
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/23 01:11:05Damien Miller
[auth.h dispatch.c kex.h sftp-client.c] #include <signal.h> for sig_atomic_t; need this prior to <sys/param.h> move
2006-07-10 - stevesk@cvs.openbsd.org 2006/07/06 16:03:53Damien Miller
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c] [auth-rhosts.c auth-rsa.c auth.c auth.h auth2-hostbased.c] [auth2-pubkey.c auth2.c includes.h misc.c misc.h monitor.c] [monitor_wrap.c monitor_wrap.h scp.c serverloop.c session.c] [session.h sftp-common.c ssh-add.c ssh-keygen.c ssh-keysign.c] [ssh.c sshconnect.c sshconnect.h sshd.c sshpty.c sshpty.h uidswap.c] [uidswap.h] move #include <pwd.h> out of includes.h; ok markus@
2006-05-12* Update to current GSSAPI patch fromColin Watson
http://www.sxw.org.uk/computing/patches/openssh-4.3p2-gsskex-20060223.patch (closes: #352042).
2006-04-23 - (djm) [auth.h dispatch.h kex.h] sprinkle in signal.h to getDamien Miller
sig_atomic_t
2006-04-23 - djm@cvs.openbsd.org 2006/04/20 09:27:09Damien Miller
[auth.h clientloop.c dispatch.c dispatch.h kex.h] replace the last non-sig_atomic_t flag used in a signal handler with a sig_atomic_t, unfortunately with some knock-on effects in other (non- signal) contexts in which it is used; ok markus@
2006-03-26 - djm@cvs.openbsd.org 2006/03/25 22:22:43Damien Miller
[atomicio.h auth-options.h auth.h auth2-gss.c authfd.h authfile.h] [bufaux.h buffer.h canohost.h channels.h cipher.h clientloop.h] [compat.h compress.h crc32.c crc32.h deattack.h dh.h dispatch.h] [dns.c dns.h getput.h groupaccess.h gss-genr.c gss-serv-krb5.c] [gss-serv.c hostfile.h includes.h kex.h key.h log.h mac.h match.h] [misc.h monitor.h monitor_fdpass.h monitor_mm.h monitor_wrap.h msg.h] [myproposal.h packet.h pathnames.h progressmeter.h readconf.h rsa.h] [scard.h servconf.h serverloop.h session.h sftp-common.h sftp.h] [ssh-gss.h ssh.h ssh1.h ssh2.h sshconnect.h sshlogin.h sshpty.h] [ttymodes.h uidswap.h uuencode.h xmalloc.h] standardise spacing in $OpenBSD$ tags; requested by deraadt@
2005-09-14Merge 4.2p1 to the trunk.Colin Watson
2005-07-07 - [auth-krb5.c auth.h gss-serv-krb5.c] Move KRB5CCNAME generation for the MITDarren Tucker
Kerberos code path into a common function and expand mkstemp template to be consistent with the rest of OpenSSH. From sxw at inf.ed.ac.uk, ok djm@
2005-06-17Manoj Srivastava:Colin Watson
- Added SELinux capability, and turned it on be default. Added restorecon calls in preinst and postinst (should not matter if the machine is not SELinux aware). By and large, the changes made should have no effect unless the rules file calls --with-selinux; and even then there should be no performance hit for machines not actively running SELinux. - Modified the preinst and postinst to call restorecon to set the security context for the generated public key files. - Added a comment to /etc/pam.d/ssh to indicate that an SELinux system may want to also include pam_selinux.so.
2005-06-16 - djm@cvs.openbsd.org 2005/06/06 11:20:36Damien Miller
[auth.c auth.h misc.c misc.h ssh.c ssh_config.5 sshconnect.c] introduce a generic %foo expansion function. replace existing % expansion and add expansion to ControlPath; ok markus@
2005-03-31 - (dtucker) [auth.h sshd.c openbsd-compat/port-aix.c] Bug #1006: fix bug inDarren Tucker
handling of password expiry messages returned by AIX's authentication routines, originally reported by robvdwal at sara.nl.
2005-02-03 - (dtucker) [Makefile.in auth.c auth.h auth1.c auth2.c loginrec.c monitor.cDarren Tucker
monitor.h monitor_wrap.c monitor_wrap.h session.c sshd.c] Bug #125: (first stage) Add audit instrumentation to sshd, currently disabled by default. with suggestions from and djm@
2005-01-20 - (dtucker) [auth-chall.c auth.h auth2-chall.c] Bug #936: Remove pam fromDarren Tucker
the list of available kbdint devices if UsePAM=no. ok djm@