summaryrefslogtreecommitdiff
path: root/auth2.c
AgeCommit message (Collapse)Author
2013-09-14* New upstream release (http://www.openssh.com/txt/release-6.3).Colin Watson
- sftp(1): add support for resuming partial downloads using the "reget" command and on the sftp commandline or on the "get" commandline using the "-a" (append) option (closes: #158590). - ssh(1): add an "IgnoreUnknown" configuration option to selectively suppress errors arising from unknown configuration directives (closes: #436052). - sftp(1): update progressmeter when data is acknowledged, not when it's sent (partially addresses #708372). - ssh(1): do not fatally exit when attempting to cleanup multiplexing- created channels that are incompletely opened (closes: #651357).
2013-09-14merge 6.3p1Colin Watson
2013-06-02 - djm@cvs.openbsd.org 2013/05/19 02:42:42Darren Tucker
[auth.h auth.c key.c monitor.c auth-rsa.c auth2.c auth1.c key.h] Standardise logging of supplemental information during userauth. Keys and ruser is now logged in the auth success/failure message alongside the local username, remote host/port and protocol in use. Certificates contents and CA are logged too. Pushing all logging onto a single line simplifies log analysis as it is no longer necessary to relate information scattered across multiple log entries. "I like it" markus@
2013-06-02 - djm@cvs.openbsd.org 2013/05/17 00:13:13Darren Tucker
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c dns.c packet.c readpass.c authfd.c moduli.c] bye, bye xfree(); ok markus@
2013-05-07* New upstream release (http://www.openssh.com/txt/release-6.2).Colin Watson
- Add support for multiple required authentication in SSH protocol 2 via an AuthenticationMethods option (closes: #195716). - Fix Sophie Germain formula in moduli(5) (closes: #698612). - Update ssh-copy-id to Phil Hands' greatly revised version (closes: #99785, #322228, #620428; LP: #518883, #835901, #1074798).
2013-05-07merge 6.2p1; reorder additions to monitor.h for easier merging in futureColin Watson
2013-04-23 - markus@cvs.openbsd.org 2013/03/07 19:27:25Damien Miller
[auth.h auth2-chall.c auth2.c monitor.c sshd_config.5] add submethod support to AuthenticationMethods; ok and freedback djm@
2012-12-03 - djm@cvs.openbsd.org 2012/12/02 20:34:10Damien Miller
[auth.c auth.h auth1.c auth2-chall.c auth2-gss.c auth2-jpake.c auth2.c] [monitor.c monitor.h] Fixes logging of partial authentication when privsep is enabled Previously, we recorded "Failed xxx" since we reset authenticated before calling auth_log() in auth2.c. This adds an explcit "Partial" state. Add a "submethod" to auth_log() to report which submethod is used for keyboard-interactive. Fix multiple authentication when one of the methods is keyboard-interactive. ok markus@
2012-11-04 - djm@cvs.openbsd.org 2012/11/04 11:09:15Damien Miller
[auth.h auth1.c auth2.c monitor.c servconf.c servconf.h sshd.c] [sshd_config.5] Support multiple required authentication via an AuthenticationMethods option. This option lists one or more comma-separated lists of authentication method names. Successful completion of all the methods in any list is required for authentication to complete; feedback and ok markus@
2012-05-18* New upstream release (http://www.openssh.org/txt/release-6.0).Colin Watson
- Fix IPQoS not being set on non-mapped v4-in-v6 addressed connections (closes: #643312, #650512). - Add a new privilege separation sandbox implementation for Linux's new seccomp sandbox, automatically enabled on platforms that support it. (Note: privilege separation sandboxing is still experimental.)
2012-05-17merge 6.0p1Colin Watson
2011-12-19 - djm@cvs.openbsd.org 2011/12/07 05:44:38Damien Miller
[auth2.c dh.c packet.c roaming.h roaming_client.c roaming_common.c] fix some harmless and/or unreachable int overflows; reported Xi Wang, ok markus@
2011-09-06* New upstream release (http://www.openssh.org/txt/release-5.9).Colin Watson
- Introduce sandboxing of the pre-auth privsep child using an optional sshd_config(5) "UsePrivilegeSeparation=sandbox" mode that enables mandatory restrictions on the syscalls the privsep child can perform. - Add new SHA256-based HMAC transport integrity modes from http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt. - The pre-authentication sshd(8) privilege separation slave process now logs via a socket shared with the master process, avoiding the need to maintain /dev/log inside the chroot (closes: #75043, #429243, #599240). - ssh(1) now warns when a server refuses X11 forwarding (closes: #504757). - sshd_config(5)'s AuthorizedKeysFile now accepts multiple paths, separated by whitespace (closes: #76312). The authorized_keys2 fallback is deprecated but documented (closes: #560156). - ssh(1) and sshd(8): set IPv6 traffic class from IPQoS, as well as IPv4 ToS/DSCP (closes: #498297). - ssh-add(1) now accepts keys piped from standard input. E.g. "ssh-add - < /path/to/key" (closes: #229124). - Clean up lost-passphrase text in ssh-keygen(1) (closes: #444691). - Say "required" rather than "recommended" in unprotected-private-key warning (LP: #663455).
2011-09-06merge 5.9p1Colin Watson
2011-05-05 - OpenBSD CVS SyncDamien Miller
- djm@cvs.openbsd.org 2011/03/10 02:52:57 [auth2-gss.c auth2.c] allow GSSAPI authentication to detect when a server-side failure causes authentication failure and don't count such failures against MaxAuthTries; bz#1244 from simon AT sxw.org.uk; ok markus@ before lock
2011-01-24* New upstream release (http://www.openssh.org/txt/release-5.7):Colin Watson
- Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer better performance than plain DH and DSA at the same equivalent symmetric key length, as well as much shorter keys. - sftp(1)/sftp-server(8): add a protocol extension to support a hard link operation. It is available through the "ln" command in the client. The old "ln" behaviour of creating a symlink is available using its "-s" option or through the preexisting "symlink" command. - scp(1): Add a new -3 option to scp: Copies between two remote hosts are transferred through the local host (closes: #508613). - ssh(1): "atomically" create the listening mux socket by binding it on a temporary name and then linking it into position after listen() has succeeded. This allows the mux clients to determine that the server socket is either ready or stale without races (closes: #454784). Stale server sockets are now automatically removed (closes: #523250). - ssh(1): install a SIGCHLD handler to reap expired child process (closes: #594687). - ssh(1)/ssh-agent(1): honour $TMPDIR for client xauth and ssh-agent temporary directories (closes: #357469, although only if you arrange for ssh-agent to actually see $TMPDIR since the setgid bit will cause it to be stripped off).
2011-01-24merge 5.7p1Colin Watson
2010-08-31 - djm@cvs.openbsd.org 2010/08/31 09:58:37Damien Miller
[auth-options.c auth1.c auth2.c bufaux.c buffer.h kex.c key.c packet.c] [packet.h ssh-dss.c ssh-rsa.c] Add buffer_get_cstring() and related functions that verify that the string extracted from the buffer contains no embedded \0 characters* This prevents random (possibly malicious) crap from being appended to strings where it would not be noticed if the string is used with a string(3) function. Use the new API in a few sensitive places. * actually, we allow a single one at the end of the string for now because we don't know how many deployed implementations get this wrong, but don't count on this to remain indefinitely.
2010-01-24* New upstream release.Colin Watson
* Update to GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-5.3p1-gsskex-all-20100124.patch.
2010-01-24import openssh-5.3p1-gsskex-all-20100124.patchColin Watson
2010-01-01* New upstream release (closes: #536182). Yes, I know 5.3p1 has been outColin Watson
for a while, but there's no GSSAPI patch available for it yet. - Change the default cipher order to prefer the AES CTR modes and the revised "arcfour256" mode to CBC mode ciphers that are susceptible to CPNI-957037 "Plaintext Recovery Attack Against SSH". - Add countermeasures to mitigate CPNI-957037-style attacks against the SSH protocol's use of CBC-mode ciphers. Upon detection of an invalid packet length or Message Authentication Code, ssh/sshd will continue reading up to the maximum supported packet length rather than immediately terminating the connection. This eliminates most of the known differences in behaviour that leaked information about the plaintext of injected data which formed the basis of this attack (closes: #506115, LP: #379329). - ForceCommand directive now accepts commandline arguments for the internal-sftp server (closes: #524423, LP: #362511). - Add AllowAgentForwarding to available Match keywords list (closes: #540623). - Make ssh(1) send the correct channel number for SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE messages to avoid triggering 'Non-public channel' error messages on sshd(8) in openssh-5.1. - Avoid printing 'Non-public channel' warnings in sshd(8), since the ssh(1) has sent incorrect channel numbers since ~2004 (this reverts a behaviour introduced in openssh-5.1; closes: #496017). * Update to GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-5.2p1-gsskex-all-20090726.patch, including cascading credentials support (LP: #416958).
2010-01-01import openssh-5.2p1-gsskex-all-20090726.patchColin Watson
2009-12-29import openssh-5.1p1-gsskex-cjwatson-20080722.patchColin Watson
2009-12-29import openssh-4.7p1-gsskex-20070927.patchColin Watson
2009-12-29import openssh-4.6p1-gsskex-20070312.patchColin Watson
2009-12-29import openssh-4.3p2-gsskex-20060223.patchColin Watson
2009-12-29import openssh-4.2p1-gsskex-20050926-2.patchColin Watson
2009-12-29import openssh-4.0p1-gssapikex.patchColin Watson
2009-06-22 - dtucker@cvs.openbsd.org 2009/06/22 05:39:28Darren Tucker
[monitor_wrap.c monitor_mm.c ssh-keygen.c auth2.c gss-genr.c sftp-client.c] alphabetize includes; reduces diff vs portable and style(9). ok stevesk djm (Id sync only; these were already in order in -portable)
2009-06-21 - (dtucker) [auth2-jpake.c auth2.c canohost.h session.c] Whitespace andDarren Tucker
header-order changes to reduce diff vs OpenBSD.
2008-11-05 - djm@cvs.openbsd.org 2008/11/04 08:22:13Damien Miller
[auth.h auth2.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h] [readconf.c readconf.h servconf.c servconf.h ssh2.h ssh_config.5] [sshconnect2.c sshd_config.5 jpake.c jpake.h schnorr.c auth2-jpake.c] [Makefile.in] Add support for an experimental zero-knowledge password authentication method using the J-PAKE protocol described in F. Hao, P. Ryan, "Password Authenticated Key Exchange by Juggling", 16th Workshop on Security Protocols, Cambridge, April 2008. This method allows password-based authentication without exposing the password to the server. Instead, the client and server exchange cryptographic proofs to demonstrate of knowledge of the password while revealing nothing useful to an attacker or compromised endpoint. This is experimental, work-in-progress code and is presently compiled-time disabled (turn on -DJPAKE in Makefile.inc). "just commit it. It isn't too intrusive." deraadt@
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-07-05 - djm@cvs.openbsd.org 2008/07/04 23:30:16Damien Miller
[auth1.c auth2.c] Make protocol 1 MaxAuthTries logic match protocol 2's. Do not treat the first protocol 2 authentication attempt as a failure IFF it is for method "none". Makes MaxAuthTries' user-visible behaviour identical for protocol 1 vs 2. ok dtucker@
2008-07-04 - djm@cvs.openbsd.org 2008/07/02 13:30:34Darren Tucker
[auth2.c] really really remove the freebie "none" auth try for protocol 2
2008-07-02 - djm@cvs.openbsd.org 2008/07/02 12:36:39Darren Tucker
[auth2-none.c auth2.c] Make protocol 2 MaxAuthTries behaviour a little more sensible: Check whether client has exceeded MaxAuthTries before running an authentication method and skip it if they have, previously it would always allow one try (for "none" auth). Preincrement failure count before post-auth test - previously this checked and postincremented, also to allow one "none" try. Together, these two changes always count the "none" auth method which could be skipped by a malicious client (e.g. an SSH worm) to get an extra attempt at a real auth method. They also make MaxAuthTries=0 a useful way to block users entirely (esp. in a sshd_config Match block). Also, move sending of any preauth banner from "none" auth method to the first call to input_userauth_request(), so worms that skip the "none" method get to see it too.
2007-12-24* New upstream release (closes: #453367).Colin Watson
- CVE-2007-4752: Prevent ssh(1) from using a trusted X11 cookie if creation of an untrusted cookie fails; found and fixed by Jan Pechanec (closes: #444738). - sshd(8) in new installations defaults to SSH Protocol 2 only. Existing installations are unchanged. - The SSH channel window size has been increased, and both ssh(1) sshd(8) now send window updates more aggressively. These improves performance on high-BDP (Bandwidth Delay Product) networks. - ssh(1) and sshd(8) now preserve MAC contexts between packets, which saves 2 hash calls per packet and results in 12-16% speedup for arcfour256/hmac-md5. - A new MAC algorithm has been added, UMAC-64 (RFC4418) as "umac-64@openssh.com". UMAC-64 has been measured to be approximately 20% faster than HMAC-MD5. - Failure to establish a ssh(1) TunnelForward is now treated as a fatal error when the ExitOnForwardFailure option is set. - ssh(1) returns a sensible exit status if the control master goes away without passing the full exit status. - When using a ProxyCommand in ssh(1), set the outgoing hostname with gethostname(2), allowing hostbased authentication to work. - Make scp(1) skip FIFOs rather than hanging (closes: #246774). - Encode non-printing characters in scp(1) filenames. These could cause copies to be aborted with a "protocol error". - Handle SIGINT in sshd(8) privilege separation child process to ensure that wtmp and lastlog records are correctly updated. - Report GSSAPI mechanism in errors, for libraries that support multiple mechanisms. - Improve documentation for ssh-add(1)'s -d option. - Rearrange and tidy GSSAPI code, removing server-only code being linked into the client. - Delay execution of ssh(1)'s LocalCommand until after all forwardings have been established. - In scp(1), do not truncate non-regular files. - Improve exit message from ControlMaster clients. - Prevent sftp-server(8) from reading until it runs out of buffer space, whereupon it would exit with a fatal error (closes: #365541). - pam_end() was not being called if authentication failed (closes: #405041). - Manual page datestamps updated (closes: #433181).
2007-10-26 - dtucker@cvs.openbsd.org 2007/09/29 00:25:51Damien Miller
[auth2.c] Remove unused prototype. ok djm@
2007-06-12* New upstream release (closes: #395507, #397961, #420035). ImportantColin Watson
changes not previously backported to 4.3p2: - 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4): + On portable OpenSSH, fix a GSSAPI authentication abort that could be used to determine the validity of usernames on some platforms. + Implemented conditional configuration in sshd_config(5) using the "Match" directive. This allows some configuration options to be selectively overridden if specific criteria (based on user, group, hostname and/or address) are met. So far a useful subset of post-authentication options are supported and more are expected to be added in future releases. + Add support for Diffie-Hellman group exchange key agreement with a final hash of SHA256. + Added a "ForceCommand" directive to sshd_config(5). Similar to the command="..." option accepted in ~/.ssh/authorized_keys, this forces the execution of the specified command regardless of what the user requested. This is very useful in conjunction with the new "Match" option. + Add a "PermitOpen" directive to sshd_config(5). This mirrors the permitopen="..." authorized_keys option, allowing fine-grained control over the port-forwardings that a user is allowed to establish. + Add optional logging of transactions to sftp-server(8). + ssh(1) will now record port numbers for hosts stored in ~/.ssh/known_hosts when a non-standard port has been requested (closes: #50612). + Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a non-zero exit code) when requested port forwardings could not be established. + Extend sshd_config(5) "SubSystem" declarations to allow the specification of command-line arguments. + Replacement of all integer overflow susceptible invocations of malloc(3) and realloc(3) with overflow-checking equivalents. + Many manpage fixes and improvements. + Add optional support for OpenSSL hardware accelerators (engines), enabled using the --with-ssl-engine configure option. + Tokens in configuration files may be double-quoted in order to contain spaces (closes: #319639). + Move a debug() call out of a SIGCHLD handler, fixing a hang when the session exits very quickly (closes: #307890). + Fix some incorrect buffer allocation calculations (closes: #410599). + ssh-add doesn't ask for a passphrase if key file permissions are too liberal (closes: #103677). + Likewise, ssh doesn't ask either (closes: #99675). - 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6): + sshd now allows the enabling and disabling of authentication methods on a per user, group, host and network basis via the Match directive in sshd_config. + Fixed an inconsistent check for a terminal when displaying scp progress meter (closes: #257524). + Fix "hang on exit" when background processes are running at the time of exit on a ttyful/login session (closes: #88337). * Update to current GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch; install ChangeLog.gssapi.
2007-05-20 - stevesk@cvs.openbsd.org 2007/04/14 22:01:58Darren Tucker
[auth2.c] remove unused macro; from Dmitry V. Levin <ldv@altlinux.org>
2007-03-01 - dtucker@cvs.openbsd.org 2007/03/01 10:28:02Darren Tucker
[auth2.c sshd_config.5 servconf.c] Remove ChallengeResponseAuthentication support inside a Match block as its interaction with KbdInteractive makes it difficult to support. Also, relocate the CR/kbdint option special-case code into servconf. "please commit" djm@, ok markus@ for the relocation.
2006-08-05 - deraadt@cvs.openbsd.org 2006/08/03 03:34:42Damien Miller
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c] [auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ] [auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c] [buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c] [groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c] [key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c] [monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c] [readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h] [serverloop.c session.c session.h sftp-client.c sftp-common.c] [sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c] [ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c] [uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h] [loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h] almost entirely get rid of the culture of ".h files that include .h files" ok djm, sort of ok stevesk makes the pain stop in one easy step NB. portable commit contains everything *except* removing includes.h, as that will take a fair bit more work as we move headers that are required for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/22 20:48:23Damien Miller
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c] [auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c] [authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c] [cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c] [compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c] [includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c] [progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c] move #include <string.h> out of includes.h
2006-07-10 - stevesk@cvs.openbsd.org 2006/07/06 16:03:53Damien Miller
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c] [auth-rhosts.c auth-rsa.c auth.c auth.h auth2-hostbased.c] [auth2-pubkey.c auth2.c includes.h misc.c misc.h monitor.c] [monitor_wrap.c monitor_wrap.h scp.c serverloop.c session.c] [session.h sftp-common.c ssh-add.c ssh-keygen.c ssh-keysign.c] [ssh.c sshconnect.c sshconnect.h sshd.c sshpty.c sshpty.h uidswap.c] [uidswap.h] move #include <pwd.h> out of includes.h; ok markus@
2006-05-12* Update to current GSSAPI patch fromColin Watson
http://www.sxw.org.uk/computing/patches/openssh-4.3p2-gsskex-20060223.patch (closes: #352042).
2006-05-12Merge 4.3p2 to the trunk.Colin Watson
2006-03-26 - djm@cvs.openbsd.org 2006/03/25 13:17:03Damien Miller
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c] [auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c] [auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c] [auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c] [buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c] [cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c] [deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c] [kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c] [readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c] [sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c] [sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c] [uidswap.c uuencode.c xmalloc.c] Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that Theo nuked - our scripts to sync -portable need them in the files
2006-03-26 - deraadt@cvs.openbsd.org 2006/03/20 18:17:20Damien Miller
[auth1.c auth2.c sshd.c] sprinkle some ARGSUSED for table driven functions (which sometimes must ignore their args)
2006-03-26 - deraadt@cvs.openbsd.org 2006/03/19 18:51:18Damien Miller
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c] [auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c] [auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c] [auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c] [canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c] [groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c] [kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c] [loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c] [nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c] [scard.c scp.c servconf.c serverloop.c session.c sftp-client.c] [sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c] [ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c] [ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c] [sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c] [uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c] [openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c] [openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c] [openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c] [openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c] RCSID() can die
2005-09-24 - (dtucker) [auth2.c] Move start_pam() calls out of if-else block to removeDarren Tucker
duplicate call. ok djm@
2005-09-14* Add remaining pieces of Kerberos support (closes: #275472):Colin Watson
- Add GSSAPI key exchange support from http://www.sxw.org.uk/computing/patches/openssh.html (thanks, Stephen Frost).