| Age | Commit message (Collapse) | Author |
|---|
|
- Add support for multiple required authentication in SSH protocol 2 via
an AuthenticationMethods option (closes: #195716).
- Fix Sophie Germain formula in moduli(5) (closes: #698612).
- Update ssh-copy-id to Phil Hands' greatly revised version (closes:
#99785, #322228, #620428; LP: #518883, #835901, #1074798).
|
|
|
|
[auth.c auth.h auth1.c auth2-chall.c auth2-gss.c auth2-jpake.c auth2.c]
[monitor.c monitor.h]
Fixes logging of partial authentication when privsep is enabled
Previously, we recorded "Failed xxx" since we reset authenticated before
calling auth_log() in auth2.c. This adds an explcit "Partial" state.
Add a "submethod" to auth_log() to report which submethod is used
for keyboard-interactive.
Fix multiple authentication when one of the methods is
keyboard-interactive.
ok markus@
|
|
[auth.h auth1.c auth2.c monitor.c servconf.c servconf.h sshd.c]
[sshd_config.5]
Support multiple required authentication via an AuthenticationMethods
option. This option lists one or more comma-separated lists of
authentication method names. Successful completion of all the methods in
any list is required for authentication to complete;
feedback and ok markus@
|
|
- Fix IPQoS not being set on non-mapped v4-in-v6 addressed connections
(closes: #643312, #650512).
- Add a new privilege separation sandbox implementation for Linux's new
seccomp sandbox, automatically enabled on platforms that support it.
(Note: privilege separation sandboxing is still experimental.)
|
|
|
|
[auth2.c dh.c packet.c roaming.h roaming_client.c roaming_common.c]
fix some harmless and/or unreachable int overflows;
reported Xi Wang, ok markus@
|
|
- Introduce sandboxing of the pre-auth privsep child using an optional
sshd_config(5) "UsePrivilegeSeparation=sandbox" mode that enables
mandatory restrictions on the syscalls the privsep child can perform.
- Add new SHA256-based HMAC transport integrity modes from
http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt.
- The pre-authentication sshd(8) privilege separation slave process now
logs via a socket shared with the master process, avoiding the need to
maintain /dev/log inside the chroot (closes: #75043, #429243,
#599240).
- ssh(1) now warns when a server refuses X11 forwarding (closes:
#504757).
- sshd_config(5)'s AuthorizedKeysFile now accepts multiple paths,
separated by whitespace (closes: #76312). The authorized_keys2
fallback is deprecated but documented (closes: #560156).
- ssh(1) and sshd(8): set IPv6 traffic class from IPQoS, as well as IPv4
ToS/DSCP (closes: #498297).
- ssh-add(1) now accepts keys piped from standard input. E.g. "ssh-add
- < /path/to/key" (closes: #229124).
- Clean up lost-passphrase text in ssh-keygen(1) (closes: #444691).
- Say "required" rather than "recommended" in unprotected-private-key
warning (LP: #663455).
|
|
|
|
- djm@cvs.openbsd.org 2011/03/10 02:52:57
[auth2-gss.c auth2.c]
allow GSSAPI authentication to detect when a server-side failure causes
authentication failure and don't count such failures against MaxAuthTries;
bz#1244 from simon AT sxw.org.uk; ok markus@ before lock
|
|
- Implement Elliptic Curve Cryptography modes for key exchange (ECDH)
and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA
offer better performance than plain DH and DSA at the same equivalent
symmetric key length, as well as much shorter keys.
- sftp(1)/sftp-server(8): add a protocol extension to support a hard
link operation. It is available through the "ln" command in the
client. The old "ln" behaviour of creating a symlink is available
using its "-s" option or through the preexisting "symlink" command.
- scp(1): Add a new -3 option to scp: Copies between two remote hosts
are transferred through the local host (closes: #508613).
- ssh(1): "atomically" create the listening mux socket by binding it on
a temporary name and then linking it into position after listen() has
succeeded. This allows the mux clients to determine that the server
socket is either ready or stale without races (closes: #454784).
Stale server sockets are now automatically removed (closes: #523250).
- ssh(1): install a SIGCHLD handler to reap expired child process
(closes: #594687).
- ssh(1)/ssh-agent(1): honour $TMPDIR for client xauth and ssh-agent
temporary directories (closes: #357469, although only if you arrange
for ssh-agent to actually see $TMPDIR since the setgid bit will cause
it to be stripped off).
|
|
|
|
[auth-options.c auth1.c auth2.c bufaux.c buffer.h kex.c key.c packet.c]
[packet.h ssh-dss.c ssh-rsa.c]
Add buffer_get_cstring() and related functions that verify that the
string extracted from the buffer contains no embedded \0 characters*
This prevents random (possibly malicious) crap from being appended to
strings where it would not be noticed if the string is used with
a string(3) function.
Use the new API in a few sensitive places.
* actually, we allow a single one at the end of the string for now because
we don't know how many deployed implementations get this wrong, but don't
count on this to remain indefinitely.
|
|
* Update to GSSAPI patch from
http://www.sxw.org.uk/computing/patches/openssh-5.3p1-gsskex-all-20100124.patch.
|
|
|
|
for a while, but there's no GSSAPI patch available for it yet.
- Change the default cipher order to prefer the AES CTR modes and the
revised "arcfour256" mode to CBC mode ciphers that are susceptible to
CPNI-957037 "Plaintext Recovery Attack Against SSH".
- Add countermeasures to mitigate CPNI-957037-style attacks against the
SSH protocol's use of CBC-mode ciphers. Upon detection of an invalid
packet length or Message Authentication Code, ssh/sshd will continue
reading up to the maximum supported packet length rather than
immediately terminating the connection. This eliminates most of the
known differences in behaviour that leaked information about the
plaintext of injected data which formed the basis of this attack
(closes: #506115, LP: #379329).
- ForceCommand directive now accepts commandline arguments for the
internal-sftp server (closes: #524423, LP: #362511).
- Add AllowAgentForwarding to available Match keywords list (closes:
#540623).
- Make ssh(1) send the correct channel number for
SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE messages to
avoid triggering 'Non-public channel' error messages on sshd(8) in
openssh-5.1.
- Avoid printing 'Non-public channel' warnings in sshd(8), since the
ssh(1) has sent incorrect channel numbers since ~2004 (this reverts a
behaviour introduced in openssh-5.1; closes: #496017).
* Update to GSSAPI patch from
http://www.sxw.org.uk/computing/patches/openssh-5.2p1-gsskex-all-20090726.patch,
including cascading credentials support (LP: #416958).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[monitor_wrap.c monitor_mm.c ssh-keygen.c auth2.c gss-genr.c sftp-client.c]
alphabetize includes; reduces diff vs portable and style(9).
ok stevesk djm
(Id sync only; these were already in order in -portable)
|
|
header-order changes to reduce diff vs OpenBSD.
|
|
[auth.h auth2.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h]
[readconf.c readconf.h servconf.c servconf.h ssh2.h ssh_config.5]
[sshconnect2.c sshd_config.5 jpake.c jpake.h schnorr.c auth2-jpake.c]
[Makefile.in]
Add support for an experimental zero-knowledge password authentication
method using the J-PAKE protocol described in F. Hao, P. Ryan,
"Password Authenticated Key Exchange by Juggling", 16th Workshop on
Security Protocols, Cambridge, April 2008.
This method allows password-based authentication without exposing
the password to the server. Instead, the client and server exchange
cryptographic proofs to demonstrate of knowledge of the password while
revealing nothing useful to an attacker or compromised endpoint.
This is experimental, work-in-progress code and is presently
compiled-time disabled (turn on -DJPAKE in Makefile.inc).
"just commit it. It isn't too intrusive." deraadt@
|
|
backported to 4.7p1:
- 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9):
+ Added chroot(2) support for sshd(8), controlled by a new option
"ChrootDirectory" (closes: #139047, LP: #24777).
+ Linked sftp-server(8) into sshd(8). The internal sftp server is used
when the command "internal-sftp" is specified in a Subsystem or
ForceCommand declaration. When used with ChrootDirectory, the
internal sftp server requires no special configuration of files
inside the chroot environment.
+ Added a protocol extension method "posix-rename@openssh.com" for
sftp-server(8) to perform POSIX atomic rename() operations; sftp(1)
prefers this if available (closes: #308561).
+ Removed the fixed limit of 100 file handles in sftp-server(8).
+ ssh(8) will now skip generation of SSH protocol 1 ephemeral server
keys when in inetd mode and protocol 2 connections are negotiated.
This speeds up protocol 2 connections to inetd-mode servers that
also allow Protocol 1.
+ Accept the PermitRootLogin directive in a sshd_config(5) Match
block. Allows for, e.g. permitting root only from the local network.
+ Reworked sftp(1) argument splitting and escaping to be more
internally consistent (i.e. between sftp commands) and more
consistent with sh(1). Please note that this will change the
interpretation of some quoted strings, especially those with
embedded backslash escape sequences.
+ Support "Banner=none" in sshd_config(5) to disable sending of a
pre-login banner (e.g. in a Match block).
+ ssh(1) ProxyCommands are now executed with $SHELL rather than
/bin/sh.
+ ssh(1)'s ConnectTimeout option is now applied to both the TCP
connection and the SSH banner exchange (previously it just covered
the TCP connection). This allows callers of ssh(1) to better detect
and deal with stuck servers that accept a TCP connection but don't
progress the protocol, and also makes ConnectTimeout useful for
connections via a ProxyCommand.
+ scp(1) incorrectly reported "stalled" on slow copies (closes:
#140828).
+ scp(1) date underflow for timestamps before epoch.
+ ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS,
instead of the current standard RRSIG.
+ Correctly drain ACKs when a sftp(1) upload write fails midway,
avoids a fatal() exit from what should be a recoverable condition.
+ Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF
hostname") to not include any IP address in the data to be hashed.
+ Make ssh(1) skip listening on the IPv6 wildcard address when a
binding address of 0.0.0.0 is used against an old SSH server that
does not support the RFC4254 syntax for wildcard bind addresses.
+ Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is
already done for X11/TCP forwarding sockets (closes: #439661).
+ Fix FD leak that could hang a ssh(1) connection multiplexing master.
+ Make ssh(1) -q option documentation consistent with reality.
+ Fixed sshd(8) PAM support not calling pam_session_close(), or
failing to call it with root privileges (closes: #372680).
+ Fix activation of OpenSSL engine support when requested in configure
(LP: #119295).
- 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1):
+ Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1)
and ssh-keygen(1). Visual fingerprint display is controlled by a new
ssh_config(5) option "VisualHostKey". The intent is to render SSH
host keys in a visual form that is amenable to easy recall and
rejection of changed host keys.
+ sshd_config(5) now supports CIDR address/masklen matching in "Match
address" blocks, with a fallback to classic wildcard matching.
+ sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys
from="..." restrictions, also with a fallback to classic wildcard
matching.
+ Added an extended test mode (-T) to sshd(8) to request that it write
its effective configuration to stdout and exit. Extended test mode
also supports the specification of connection parameters (username,
source address and hostname) to test the application of
sshd_config(5) Match rules.
+ ssh(1) now prints the number of bytes transferred and the overall
connection throughput for SSH protocol 2 sessions when in verbose
mode (previously these statistics were displayed for protocol 1
connections only).
+ sftp-server(8) now supports extension methods statvfs@openssh.com
and fstatvfs@openssh.com that implement statvfs(2)-like operations.
+ sftp(1) now has a "df" command to the sftp client that uses the
statvfs@openssh.com to produce a df(1)-like display of filesystem
space and inode utilisation (requires statvfs@openssh.com support on
the server).
+ Added a MaxSessions option to sshd_config(5) to allow control of the
number of multiplexed sessions supported over a single TCP
connection. This allows increasing the number of allowed sessions
above the previous default of 10, disabling connection multiplexing
(MaxSessions=1) or disallowing login/shell/subsystem sessions
entirely (MaxSessions=0).
+ Added a no-more-sessions@openssh.com global request extension that
is sent from ssh(1) to sshd(8) when the client knows that it will
never request another session (i.e. when session multiplexing is
disabled). This allows a server to disallow further session requests
and terminate the session in cases where the client has been
hijacked.
+ ssh-keygen(1) now supports the use of the -l option in combination
with -F to search for a host in ~/.ssh/known_hosts and display its
fingerprint.
+ ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of
"rsa1".
+ Added an AllowAgentForwarding option to sshd_config(8) to control
whether authentication agent forwarding is permitted. Note that this
is a loose control, as a client may install their own unofficial
forwarder.
+ ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when
receiving network data, resulting in a ~10% speedup.
+ ssh(1) and sshd(8) will now try additional addresses when connecting
to a port forward destination whose DNS name resolves to more than
one address. The previous behaviour was to try the only first
address and give up if that failed.
+ ssh(1) and sshd(8) now support signalling that channels are
half-closed for writing, through a channel protocol extension
notification "eow@openssh.com". This allows propagation of closed
file descriptors, so that commands such as "ssh -2 localhost od
/bin/ls | true" do not send unnecessary data over the wire.
+ sshd(8): increased the default size of ssh protocol 1 ephemeral keys
from 768 to 1024 bits.
+ When ssh(1) has been requested to fork after authentication ("ssh
-f") with ExitOnForwardFailure enabled, delay the fork until after
replies for any -R forwards have been seen. Allows for robust
detection of -R forward failure when using -f.
+ "Match group" blocks in sshd_config(5) now support negation of
groups. E.g. "Match group staff,!guests".
+ sftp(1) and sftp-server(8) now allow chmod-like operations to set
set[ug]id/sticky bits.
+ The MaxAuthTries option is now permitted in sshd_config(5) match
blocks.
+ Multiplexed ssh(1) sessions now support a subset of the ~ escapes
that are available to a primary connection.
+ ssh(1) connection multiplexing will now fall back to creating a new
connection in most error cases (closes: #352830).
+ Make ssh(1) deal more gracefully with channel requests that fail.
Previously it would optimistically assume that requests would always
succeed, which could cause hangs if they did not (e.g. when the
server runs out of file descriptors).
+ ssh(1) now reports multiplexing errors via the multiplex slave's
stderr where possible (subject to LogLevel in the mux master).
+ Prevent sshd(8) from erroneously applying public key restrictions
leaned from ~/.ssh/authorized_keys to other authentication methods
when public key authentication subsequently fails (LP: #161047).
+ Fixed an UMAC alignment problem that manifested on Itanium
platforms.
|
|
[auth1.c auth2.c]
Make protocol 1 MaxAuthTries logic match protocol 2's.
Do not treat the first protocol 2 authentication attempt as
a failure IFF it is for method "none".
Makes MaxAuthTries' user-visible behaviour identical for
protocol 1 vs 2.
ok dtucker@
|
|
[auth2.c]
really really remove the freebie "none" auth try for protocol 2
|
|
[auth2-none.c auth2.c]
Make protocol 2 MaxAuthTries behaviour a little more sensible:
Check whether client has exceeded MaxAuthTries before running
an authentication method and skip it if they have, previously it
would always allow one try (for "none" auth).
Preincrement failure count before post-auth test - previously this
checked and postincremented, also to allow one "none" try.
Together, these two changes always count the "none" auth method
which could be skipped by a malicious client (e.g. an SSH worm)
to get an extra attempt at a real auth method. They also make
MaxAuthTries=0 a useful way to block users entirely (esp. in a
sshd_config Match block).
Also, move sending of any preauth banner from "none" auth method
to the first call to input_userauth_request(), so worms that skip
the "none" method get to see it too.
|
|
- CVE-2007-4752: Prevent ssh(1) from using a trusted X11 cookie if
creation of an untrusted cookie fails; found and fixed by Jan Pechanec
(closes: #444738).
- sshd(8) in new installations defaults to SSH Protocol 2 only. Existing
installations are unchanged.
- The SSH channel window size has been increased, and both ssh(1)
sshd(8) now send window updates more aggressively. These improves
performance on high-BDP (Bandwidth Delay Product) networks.
- ssh(1) and sshd(8) now preserve MAC contexts between packets, which
saves 2 hash calls per packet and results in 12-16% speedup for
arcfour256/hmac-md5.
- A new MAC algorithm has been added, UMAC-64 (RFC4418) as
"umac-64@openssh.com". UMAC-64 has been measured to be approximately
20% faster than HMAC-MD5.
- Failure to establish a ssh(1) TunnelForward is now treated as a fatal
error when the ExitOnForwardFailure option is set.
- ssh(1) returns a sensible exit status if the control master goes away
without passing the full exit status.
- When using a ProxyCommand in ssh(1), set the outgoing hostname with
gethostname(2), allowing hostbased authentication to work.
- Make scp(1) skip FIFOs rather than hanging (closes: #246774).
- Encode non-printing characters in scp(1) filenames. These could cause
copies to be aborted with a "protocol error".
- Handle SIGINT in sshd(8) privilege separation child process to ensure
that wtmp and lastlog records are correctly updated.
- Report GSSAPI mechanism in errors, for libraries that support multiple
mechanisms.
- Improve documentation for ssh-add(1)'s -d option.
- Rearrange and tidy GSSAPI code, removing server-only code being linked
into the client.
- Delay execution of ssh(1)'s LocalCommand until after all forwardings
have been established.
- In scp(1), do not truncate non-regular files.
- Improve exit message from ControlMaster clients.
- Prevent sftp-server(8) from reading until it runs out of buffer space,
whereupon it would exit with a fatal error (closes: #365541).
- pam_end() was not being called if authentication failed
(closes: #405041).
- Manual page datestamps updated (closes: #433181).
|
|
[auth2.c]
Remove unused prototype. ok djm@
|
|
changes not previously backported to 4.3p2:
- 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4):
+ On portable OpenSSH, fix a GSSAPI authentication abort that could be
used to determine the validity of usernames on some platforms.
+ Implemented conditional configuration in sshd_config(5) using the
"Match" directive. This allows some configuration options to be
selectively overridden if specific criteria (based on user, group,
hostname and/or address) are met. So far a useful subset of
post-authentication options are supported and more are expected to
be added in future releases.
+ Add support for Diffie-Hellman group exchange key agreement with a
final hash of SHA256.
+ Added a "ForceCommand" directive to sshd_config(5). Similar to the
command="..." option accepted in ~/.ssh/authorized_keys, this forces
the execution of the specified command regardless of what the user
requested. This is very useful in conjunction with the new "Match"
option.
+ Add a "PermitOpen" directive to sshd_config(5). This mirrors the
permitopen="..." authorized_keys option, allowing fine-grained
control over the port-forwardings that a user is allowed to
establish.
+ Add optional logging of transactions to sftp-server(8).
+ ssh(1) will now record port numbers for hosts stored in
~/.ssh/known_hosts when a non-standard port has been requested
(closes: #50612).
+ Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a
non-zero exit code) when requested port forwardings could not be
established.
+ Extend sshd_config(5) "SubSystem" declarations to allow the
specification of command-line arguments.
+ Replacement of all integer overflow susceptible invocations of
malloc(3) and realloc(3) with overflow-checking equivalents.
+ Many manpage fixes and improvements.
+ Add optional support for OpenSSL hardware accelerators (engines),
enabled using the --with-ssl-engine configure option.
+ Tokens in configuration files may be double-quoted in order to
contain spaces (closes: #319639).
+ Move a debug() call out of a SIGCHLD handler, fixing a hang when the
session exits very quickly (closes: #307890).
+ Fix some incorrect buffer allocation calculations (closes: #410599).
+ ssh-add doesn't ask for a passphrase if key file permissions are too
liberal (closes: #103677).
+ Likewise, ssh doesn't ask either (closes: #99675).
- 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6):
+ sshd now allows the enabling and disabling of authentication methods
on a per user, group, host and network basis via the Match directive
in sshd_config.
+ Fixed an inconsistent check for a terminal when displaying scp
progress meter (closes: #257524).
+ Fix "hang on exit" when background processes are running at the time
of exit on a ttyful/login session (closes: #88337).
* Update to current GSSAPI patch from
http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch;
install ChangeLog.gssapi.
|
|
[auth2.c]
remove unused macro; from Dmitry V. Levin <ldv@altlinux.org>
|
|
[auth2.c sshd_config.5 servconf.c]
Remove ChallengeResponseAuthentication support inside a Match
block as its interaction with KbdInteractive makes it difficult to
support. Also, relocate the CR/kbdint option special-case code into
servconf. "please commit" djm@, ok markus@ for the relocation.
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c]
[auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c]
[authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c]
[cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c]
[compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c]
[includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c]
[progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c]
move #include <string.h> out of includes.h
|
|
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c]
[auth-rhosts.c auth-rsa.c auth.c auth.h auth2-hostbased.c]
[auth2-pubkey.c auth2.c includes.h misc.c misc.h monitor.c]
[monitor_wrap.c monitor_wrap.h scp.c serverloop.c session.c]
[session.h sftp-common.c ssh-add.c ssh-keygen.c ssh-keysign.c]
[ssh.c sshconnect.c sshconnect.h sshd.c sshpty.c sshpty.h uidswap.c]
[uidswap.h]
move #include <pwd.h> out of includes.h; ok markus@
|
|
http://www.sxw.org.uk/computing/patches/openssh-4.3p2-gsskex-20060223.patch
(closes: #352042).
|
|
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c]
[auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c]
[auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c]
[buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c]
[cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c]
[deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c]
[kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c]
[readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c]
[sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c]
Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that
Theo nuked - our scripts to sync -portable need them in the files
|
|
[auth1.c auth2.c sshd.c]
sprinkle some ARGSUSED for table driven functions (which sometimes
must ignore their args)
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c]
[auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c]
[auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c]
[auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c]
[canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c]
[groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c]
[kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c]
[loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c]
[nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c]
[scard.c scp.c servconf.c serverloop.c session.c sftp-client.c]
[sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c]
[ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c]
[ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c]
[openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c]
[openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c]
[openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c]
[openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c]
RCSID() can die
|
|
duplicate call. ok djm@
|
|
- Add GSSAPI key exchange support from
http://www.sxw.org.uk/computing/patches/openssh.html (thanks, Stephen
Frost).
|
|
|
|
[ssh-rand-helper.c] fix portable 2nd level indents at 4 spaces too
|
|
- Added SELinux capability, and turned it on be default. Added
restorecon calls in preinst and postinst (should not matter if the
machine is not SELinux aware). By and large, the changes made should
have no effect unless the rules file calls --with-selinux; and even
then there should be no performance hit for machines not actively
running SELinux.
- Modified the preinst and postinst to call restorecon to set the
security context for the generated public key files.
- Added a comment to /etc/pam.d/ssh to indicate that an SELinux system
may want to also include pam_selinux.so.
|
|
monitor_wrap.c monitor_wrap.h session.c sshd.c]: Prepend all of the audit
defines and enums with SSH_ to prevent namespace collisions on some
platforms (eg AIX).
|
|
monitor.h monitor_wrap.c monitor_wrap.h session.c sshd.c] Bug #125:
(first stage) Add audit instrumentation to sshd, currently disabled by
default. with suggestions from and djm@
|
