| Age | Commit message (Collapse) | Author |
|---|
|
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
|
|
[authfile.c]
commited the wrong version of the hostbased certificate diff; this
version replaces some strlc{py,at} verbosity with xasprintf() at
the request of markus@
|
|
[auth.c auth2-hostbased.c authfile.c authfile.h ssh-keysign.8]
[ssh-keysign.c ssh.c]
enable certificates for hostbased authentication, from Iain Morgan;
"looks ok" markus@
|
|
[auth-rh-rsa.c auth-rsa.c auth.c auth.h auth2-hostbased.c auth2-pubkey.c]
[authfile.c authfile.h hostfile.c hostfile.h servconf.c servconf.h]
[ssh-keygen.c ssh.1 sshconnect.c sshd_config.5]
Add a TrustedUserCAKeys option to sshd_config to specify CA keys that
are trusted to authenticate users (in addition than doing it per-user
in authorized_keys).
Add a RevokedKeys option to sshd_config and a @revoked marker to
known_hosts to allow keys to me revoked and banned for user or host
authentication.
feedback and ok markus@
|
|
[authfile.c]
Fix bug introduced in r1.78 (incorrect brace location) that broke key auth.
Patch from joachim joachimschipper nl.
|
|
[authfile.c sshconnect2.c]
Do not prompt for a passphrase if we fail to open a keyfile, and log the
reason the open failed to debug.
bz #1693, found by tj AT castaglia org, ok djm@
|
|
keys when built with OpenSSL versions that don't do AES.
|
|
older versions of OpenSSL.
|
|
[authfile.c]
switch from 3DES to AES-128 for encryption of passphrase-protected
SSH protocol 2 private keys; ok several
|
|
[auth-rsa.c auth-shadow.c auth-sia.c auth1.c auth2-chall.c]
[auth2-gss.c auth2-kbdint.c auth2-none.c authfd.c authfile.c]
[cipher-3des1.c cipher-aes.c cipher-bf1.c cipher-ctr.c clientloop.c]
[dh.c dns.c entropy.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c loginrec.c mac.c]
[md5crypt.c monitor.c monitor_wrap.c readconf.c rsa.c]
[scard-opensc.c scard.c session.c ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.c ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c]
[sshconnect1.c sshconnect2.c sshd.c rc4.diff]
[openbsd-compat/bsd-cray.c openbsd-compat/port-aix.c]
[openbsd-compat/port-linux.c openbsd-compat/port-solaris.c]
[openbsd-compat/port-uw.c]
Lots of headers for SCO OSR6, mainly adding stdarg.h for log.h;
compile problems reported by rac AT tenzing.org
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[authfile.c channels.c progressmeter.c scard.c servconf.c ssh.c]
clean extra spaces
|
|
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c]
[auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c]
[channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c]
[kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c]
[monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c]
[servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c]
[sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c]
[uuencode.h xmalloc.c]
move #include <stdio.h> out of includes.h
|
|
[authfd.c authfile.c dh.c canohost.c channels.c clientloop.c compat.c]
[hostfile.c kex.c log.c misc.c moduli.c monitor.c packet.c readpass.c]
[scp.c servconf.c session.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c sshconnect.c]
[sshconnect1.c sshd.c xmalloc.c]
move #include <stdlib.h> out of includes.h
|
|
[atomicio.c auth.c dh.c authfile.c buffer.c clientloop.c kex.c]
[groupaccess.c gss-genr.c kexgexs.c misc.c monitor.c monitor_mm.c]
[packet.c scp.c serverloop.c session.c sftp-client.c sftp-common.c]
[sftp-server.c sftp.c ssh-add.c ssh-agent.c ssh-keygen.c sshlogin.c]
[uidswap.c xmalloc.c]
move #include <sys/param.h> out of includes.h
|
|
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c]
[auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c]
[authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c]
[cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c]
[compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c]
[includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c]
[progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c]
move #include <string.h> out of includes.h
|
|
[authfd.c authfile.c channels.c cleanup.c clientloop.c groupaccess.c]
[includes.h log.c misc.c msg.c packet.c progressmeter.c readconf.c]
[readpass.c scp.c servconf.c sftp-client.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c]
[sshconnect.c sshlogin.c sshpty.c uidswap.c]
move #include <unistd.h> out of includes.h
|
|
[authfile.c ssh.c]
need <errno.h> here also (it's also included in <openssl/err.h>)
|
|
[auth2-none.c authfd.c authfile.c includes.h misc.c monitor.c]
[readpass.c scp.c serverloop.c sftp-client.c sftp-server.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
[sshlogin.c sshpty.c]
move #include <fcntl.h> out of includes.h
|
|
[authfile.c authfile.h sshconnect2.c ssh.c sshconnect1.c]
Prevent ssh from trying to open private keys with bad permissions more than
once or prompting for their passphrases (which it subsequently ignores
anyway), similar to a previous change in ssh-add. bz #1186, ok djm@
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c]
[auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c]
[auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c]
[buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c]
[cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c]
[deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c]
[kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c]
[readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c]
[sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c]
Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that
Theo nuked - our scripts to sync -portable need them in the files
|
|
[authfile.c]
whoever thought that break after return was a good idea needs to
get their head examimed
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c]
[auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c]
[auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c]
[auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c]
[canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c]
[groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c]
[kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c]
[loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c]
[nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c]
[scard.c scp.c servconf.c serverloop.c session.c sftp-client.c]
[sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c]
[ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c]
[ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c]
[openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c]
[openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c]
[openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c]
[openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c]
RCSID() can die
|
|
[authfile.c authfile.h ssh-add.c]
Make ssh-add check file permissions before attempting to load private
key files multiple times; it will fail anyway and this prevents confusing
multiple prompts and warnings. mindrot #1138, ok djm@
|
|
[clientloop.c includes.h monitor.c progressmeter.c scp.c]
[serverloop.c session.c sftp.c ssh-agent.c ssh.c sshd.c]
move #include <signal.h> out of includes.h; ok markus@
|
|
[auth-rsa.c auth.c auth1.c auth2-chall.c auth2-gss.c authfd.c authfile.c]
[bufaux.c canohost.c channels.c cipher.c clientloop.c dns.c gss-serv.c]
[kex.c kex.h key.c mac.c match.c misc.c packet.c packet.h scp.c]
[servconf.c session.c session.h sftp-client.c sftp-server.c sftp.c]
[ssh-keyscan.c ssh-rsa.c sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
make this -Wsign-compare clean; ok avsm@ markus@
NB. auth1.c changes not committed yet (conflicts with uncommitted sync)
NB2. more work may be needed to make portable Wsign-compare clean
|
|
[auth-rsa.c auth2-pubkey.c authfile.c misc.c misc.h]
Fix debug call in error path of authorized_keys processing and fix related
warnings; ok djm@
|
|
[auth-rsa.c auth2-pubkey.c authfile.c misc.c misc.h ssh.h sshd.8]
Discard over-length authorized_keys entries rather than complaining when
they don't decode. bz #884, with & ok djm@
|
|
[authfile.c]
fix error path, spotted by Martin.Kraemer AT Fujitsu-Siemens.com; ok markus
|
|
[auth-rsa.c auth2-gss.c auth2-pubkey.c authfile.c canohost.c channels.c
cipher.c dns.c kex.c monitor.c monitor_fdpass.c monitor_wrap.c
monitor_wrap.h nchan.c packet.c progressmeter.c scp.c sftp-server.c sftp.c
ssh-gss.h ssh-keygen.c ssh.c sshconnect.c sshconnect1.c sshlogin.c
sshpty.c]
make ssh -Wshadow clean, no functional changes
markus@ ok
There are also some portable-specific -Wshadow warnings to be fixed in
monitor.c and montior_wrap.c.
|
|
[auth.c auth2-none.c authfile.c channels.c monitor.c monitor_mm.c
packet.c packet.h progressmeter.c session.c openbsd-compat/xmmap.c]
improve some code lint did not like; djm millert ok
|
|
[authfile.c]
missing buffer_free(&encrypted); #662; zardoz at users.sf.net
|
|
[authfile.c monitor.c sftp-common.c sshpty.c]
cast some types for printing; ok markus@
|
|
[authfile.c ssh-keygen.c]
change key_load_public to try to read a public from:
rsa1 private or rsa1 public and ssh2 keys.
this makes ssh-keygen -e fail for ssh1 keys more gracefully
for example; report from itojun (netbsd pr 20550).
|
|
- markus@cvs.openbsd.org 2003/03/13 11:42:19
[authfile.c ssh-keysign.c]
move RSA_blinding_on to generic key load method
|
|
[authfile.c]
lseek(2) may return -1 when getting the public/private key lenght.
Simplify the code and check for errors using fstat(2).
Problem reported by Mauricio Sanchez, markus@ ok.
|
|
[authfile.c kex.c ssh-agent.c]
cat to (void) when output from buffer_get_X is ignored
|
|
[authfile.c authfile.h pathnames.h ssh.c sshconnect.c sshconnect.h
sshconnect1.c sshconnect2.c ssh-keysign.8 ssh-keysign.c Makefile.in]
add /usr/libexec/ssh-keysign: a setuid helper program for hostbased
authentication in protocol v2 (needs to access the hostkeys).
Note: Makefile.in untested. Will test after merge is finished.
|
|
[authfile.c kex.c kexdh.c kexgex.c key.c ssh-dss.c]
add some const EVP_MD for openssl-0.9.7
|
|
[auth2.c authfd.c authfd.h authfile.c kexdh.c kexgex.c key.c key.h
ssh-dss.c ssh-dss.h ssh-keygen.c ssh-rsa.c ssh-rsa.h sshconnect2.c]
signed vs. unsigned: make size arguments u_int, ok stevesk@
|
|
[authfile.c cipher.c cipher.h kex.c kex.h packet.c]
hide some more implementation details of cipher.[ch] and prepares for move
to EVP, ok deraadt@
|
|
[authfile.c channels.c compress.c packet.c sftp-server.c ssh-agent.c ssh-keygen.c]
remove unneeded casts and some char->u_char cleanup; ok markus@
|
|
[authfile.c]
missing include
|
|
[auth1.c authfile.c auth-rsa.c dh.c kexdh.c kexgex.c key.c rsa.c scard.c ssh-agent.c sshconnect1.c sshd.c ssh-dss.c]
call fatal() for openssl allocation failures
|
|
[authfile.c bufaux.c bufaux.h buffer.c buffer.h packet.c packet.h ssh.c]
change the buffer/packet interface to use void* vs. char*; ok markus@
|
|
[auth1.c auth2.c auth2-chall.c auth-bsdauth.c auth.c authfile.c auth.h]
[auth-krb4.c auth-rhosts.c auth-skey.c bufaux.c canohost.c channels.c]
[cipher.c clientloop.c compat.c compress.c deattack.c key.c log.c mac.c]
[match.c misc.c nchan.c packet.c readconf.c rijndael.c rijndael.h scard.c]
[servconf.c servconf.h serverloop.c session.c sftp.c sftp-client.c]
[sftp-glob.c sftp-int.c sftp-server.c ssh-add.c ssh-agent.c ssh.c]
[sshconnect1.c sshconnect2.c sshconnect.c sshd.8 sshd.c sshd_config]
[ssh-keygen.c sshlogin.c sshpty.c sshtty.c ttymodes.c uidswap.c]
basic KNF done while i was looking for something else
|
|
[authfd.c authfile.c bufaux.c channels.c compat.c kex.c kexgex.c
key.c misc.c packet.c servconf.c ssh-agent.c sshconnect2.c
sshconnect.c sshd.c ssh-dss.c ssh-keygen.c ssh-rsa.c]
minor KNF
|
|
[authfile.c]
grammer; Matthew_Clarke@mindlink.bc.ca
|
|
[authfile.c]
relax permission check for private key files.
|
|
[auth1.c auth2.c auth2-chall.c authfd.c authfile.c auth-rhosts.c
canohost.c channels.c cipher.c clientloop.c deattack.c dh.c
hostfile.c kex.c kexdh.c kexgex.c key.c nchan.c packet.c radix.c
readpass.c scp.c servconf.c serverloop.c session.c sftp.c
sftp-client.c sftp-glob.c sftp-int.c sftp-server.c ssh-add.c
ssh-agent.c ssh.c sshconnect1.c sshconnect2.c sshconnect.c sshd.c
ssh-keygen.c ssh-keyscan.c]
more strict prototypes. raise warning level in Makefile.inc.
markus ok'ed
TODO; cleanup headers
|
