Age | Commit message (Collapse) | Author |
|
Add optional rdomain qualifier to sshd_config's
ListenAddress option to allow listening on a different rdomain(4), e.g.
ListenAddress 0.0.0.0 rdomain 4
Upstream-ID: 24b6622c376feeed9e9be8b9605e593695ac9091
|
|
fix inverted test on channel open failure path that
"upgraded" a transient failure into a fatal error; reported by sthen and also
seen by benno@; ok sthen@
Upstream-ID: b58b3fbb79ba224599c6cd6b60c934fc46c68472
|
|
write the correct buffer when tunnel forwarding; doesn't
matter on OpenBSD (they are the same) but does matter on portable where we
use an output filter to translate os-specific tun/tap headers
Upstream-ID: f1ca94eff48404827b12e1d12f6139ee99a72284
|
|
fix tunnel forwarding problem introduced in refactor;
reported by stsp@ ok markus@
Upstream-ID: 81a731cdae1122c8522134095d1a8b60fa9dcd04
|
|
Add 'reverse' dynamic forwarding which combines dynamic
forwarding (-D) with remote forwarding (-R) where the remote-forwarded port
expects SOCKS-requests.
The SSH server code is unchanged and the parsing happens at the SSH
clients side. Thus the full SOCKS-request is sent over the forwarded
channel and the client parses c->output. Parsing happens in
channel_before_prepare_select(), _before_ the select bitmask is
computed in the pre[] handlers, but after network input processing
in the post[] handlers.
help and ok djm@
Upstream-ID: aa25a6a3851064f34fe719e0bf15656ad5a64b89
|
|
Use explicit_bzero() instead of bzero() before free() to
prevent the compiler from optimizing away the bzero() call. OK djm@
Upstream-ID: cdc6197e64c9684c7250e23d60863ee1b53cef1d
|
|
unused variable
Upstream-ID: 2f9ba09f2708993d35eac5aa71df910dcc52bac1
|
|
fix tun/tap forwarding case in previous
Upstream-ID: 43ebe37a930320e24bca6900dccc39857840bc53
|
|
Make remote channel ID a u_int
Previously we tracked the remote channel IDs in an int, but this is
strictly incorrect: the wire protocol uses uint32 and there is nothing
in-principle stopping a SSH implementation from sending, say, 0xffff0000.
In practice everyone numbers their channels sequentially, so this has
never been a problem.
ok markus@
Upstream-ID: b9f4cd3dc53155b4a5c995c0adba7da760d03e73
|
|
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
|
|
pass packet state down to some of the channels function
(more to come...); ok markus@
Upstream-ID: d8ce7a94f4059d7ac1e01fb0eb01de0c4b36c81b
|
|
These shutdown() SHUT_RDWR are not needed before close()
ok djm markus claudio
Upstream-ID: 36f13ae4ba10f5618cb9347933101eb4a98dbcb5
|
|
fix possible OOB strlen() in SOCKS4A hostname parsing;
ok markus@
Upstream-ID: c67297cbeb0e5a19d81752aa18ec44d31270cd11
|
|
protocol handlers all get struct ssh passed; ok djm@
Upstream-ID: 0ca9ea2a5d01a6d2ded94c5024456a930c5bfb5d
|
|
remove ssh1 references; ok djm@
Upstream-ID: fc23b7578e7b0a8daaec72946d7f5e58ffff5a3d
|
|
remove SSH_CHANNEL_XXX_DRAINING (ssh1 only); ok djm@
Upstream-ID: e2e225b6ac67b84dd024f38819afff2554fafe42
|
|
remove channel_input_close_confirmation (ssh1 only); ok
djm@
Upstream-ID: 8e7c8c38f322d255bb0294a5c0ebef53fdf576f1
|
|
obliterate ssh1.h and some dead code that used it
ok markus@
Upstream-ID: 1ca9159a9fb95618f9d51e069ac8e1131a087343
|
|
remove compat20/compat13/compat15 variables
ok markus@
Upstream-ID: 43802c035ceb3fef6c50c400e4ecabf12354691c
|
|
Check for socket with and without screen number. From Apple and Jakob
Schlyter via bz#2341, with contributions from Ron Frederick, ok djm@
|
|
Return true reason for port forwarding failures where
feasible rather than always "administratively prohibited". bz#2674, ok djm@
Upstream-ID: d901d9887951774e604ca970e1827afaaef9e419
|
|
Remove channel_input_port_forward_request(); the only caller
was the recently-removed SSH1 server code so it's now dead code. ok markus@
Upstream-ID: 05453983230a1f439562535fec2818f63f297af9
|
|
fix some -Wpointer-sign warnings in the new mux proxy; ok
markus@
Upstream-ID: b1ba7b3769fbc6b7f526792a215b0197f5e55dfd
|
|
ssh proxy mux mode (-O proxy; idea from Simon Tatham): - mux
client speaks the ssh-packet protocol directly over unix-domain socket. - mux
server acts as a proxy, translates channel IDs and relays to the server. - no
filedescriptor passing necessary. - combined with unix-domain forwarding it's
even possible to run mux client and server on different machines. feedback
& ok djm@
Upstream-ID: 666a2fb79f58e5c50e246265fb2b9251e505c25b
|
|
Replace two more arc4random() loops with
arc4random_buf().
tweaks and ok dtucker
ok deraadt
Upstream-ID: 738d3229130ccc7eac975c190276ca6fcf0208e4
|
|
Add MAXIMUM(), MINIMUM(), and ROUNDUP() to misc.h, then
use those definitions rather than pulling <sys/param.h> and unknown namespace
pollution. ok djm markus dtucker
Upstream-ID: 712cafa816c9f012a61628b66b9fbd5687223fb8
|
|
Allow wildcard for PermitOpen hosts as well as ports.
bz#2582, patch from openssh at mzpqnxow.com and jjelen at redhat.com. ok
markus@
Upstream-ID: af0294e9b9394c4e16e991424ca0a47a7cc605f2
|
|
refactor canohost.c: move functions that cache results closer
to the places that use them (authn and session code). After this, no state is
cached in canohost.c
feedback and ok markus@
Upstream-ID: 5f2e4df88d4803fc8ec59ec53629105e23ce625e
|
|
Only check errno if read() has returned an error. EOF is
not an error. This fixes a problem where the mux master would sporadically
fail to notice that the client had exited. ok mikeb@ djm@
Upstream-ID: 3c2dadc21fac6ef64665688aac8a75fffd57ae53
|
|
fix some signed/unsigned integer type mismatches in
format strings; reported by Nicholas Lemonias
Upstream-ID: 78cd55420a0eef68c4095bdfddd1af84afe5f95c
|
|
better refuse ForwardX11Trusted=no connections attempted
after ForwardX11Timeout expires; reported by Jann Horn
Upstream-ID: bf0fddadc1b46a0334e26c080038313b4b6dea21
|
|
fatal() when a remote window update causes the window
value to overflow. Reported by Georg Wicherski, ok markus@
Upstream-ID: ead397a9aceb3bf74ebfa5fcaf259d72e569f351
|
|
Fix math error in remote window calculations that causes
eventual stalls for datagram channels. Reported by Georg Wicherski, ok
markus@
Upstream-ID: be54059d11bf64e0d85061f7257f53067842e2ab
|
|
For "ssh -L 12345:/tmp/sock" don't fail with "No forward host
name." (we have a path, not a host name). Based on a diff from Jared
Yanovich. OK djm@
Upstream-ID: 2846b0a8c7de037e33657f95afbd282837fc213f
|
|
Use xcalloc for permitted_adm_opens instead of xmalloc to
ensure it's zeroed. Fixes post-auth crash with permitopen=none. bz#2355, ok
djm@
|
|
rename xrealloc() to xreallocarray() since it follows
that form. ok djm
|
|
|
|
SIZE_MAX is standard, we should be using it in preference to
the obsolete SIZE_T_MAX. OK miod@ beck@
|
|
Reduce use of <sys/param.h> and transition to <limits.h>
throughout. ok djm markus
|
|
move dispatch to struct ssh; ok djm@
|
|
explicitly include sys/param.h in files that use the
howmany() macro; from portable
|
|
fix a few -Wpointer-sign warnings from clang
|
|
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
|
|
[channels.c]
fix remote-forward cancel regression; ok markus@
|
|
[channels.c]
allow explicit ::1 and 127.0.0.1 forwarding bind addresses when
GatewayPorts=no; allows client to choose address family;
bz#2222 ok markus@
|
|
[channels.c channels.h clientloop.c ssh.c]
fix remote fwding with same listen port but different listen address
with gerhard@, ok djm@
|
|
|
|
when it is available. It takes into account time spent suspended,
thereby ensuring timeouts (e.g. for expiring agent keys) fire
correctly. bz#2228 reported by John Haxby
|
|
[authfile.c bufaux.c buffer.h channels.c krl.c mux.c packet.c packet.h]
[ssh-keygen.c]
buffer_get_string_ptr's return should be const to remind
callers that futzing with it will futz with the actual buffer
contents
|
|
[channels.c]
don't assume that the socks4 username is \0 terminated;
spotted by Ben Hawkes; ok markus@
|