summaryrefslogtreecommitdiff
path: root/channels.c
AgeCommit message (Collapse)Author
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-07-16 - djm@cvs.openbsd.org 2008/07/16 11:52:19Damien Miller
[channels.c] this loop index should be automatic, not static
2008-07-14 - djm@cvs.openbsd.org 2008/07/13 22:13:07Damien Miller
[channels.c] use struct sockaddr_storage instead of struct sockaddr for accept(2) address argument. from visibilis AT yahoo.com in bz#1485; ok markus@
2008-07-12 - (djm) OpenBSD CVS SyncDamien Miller
- djm@cvs.openbsd.org 2008/07/12 04:52:50 [channels.c] unbreak; move clearing of cctx struct to before first use reported by dkrause@
2008-07-11 - markus@cvs.openbsd.org 2008/07/10 18:05:58Damien Miller
[channels.c] missing bzero; from mickey; ok djm@
2008-07-04 - (djm) [atomicio.c channels.c clientloop.c defines.h includes.h]Damien Miller
[packet.c scp.c serverloop.c sftp-client.c ssh-agent.c ssh-keyscan.c] [sshd.c] Explicitly handle EWOULDBLOCK wherever we handle EAGAIN, on some platforms (HP nonstop) it is a distinct errno; bz#1467 reported by sconeu AT yahoo.com; ok dtucker@
2008-06-16 - (dtucker) [channels.c] isatty -> is_tty here too.Darren Tucker
2008-06-16 - dtucker@cvs.openbsd.org 2008/06/16 13:22:53Darren Tucker
[session.c channels.c] Rename the isatty argument to is_tty so we don't shadow isatty(3). ok markus@
2008-06-16 - djm@cvs.openbsd.org 2008/06/15 20:06:26Damien Miller
[channels.c channels.h session.c] don't call isatty() on a pty master, instead pass a flag down to channel_set_fds() indicating that te fds refer to a tty. Fixes a hang on exit on Solaris (bz#1463) in portable but is actually a generic bug; ok dtucker deraadt markus
2008-06-13 - djm@cvs.openbsd.org 2008/06/12 15:19:17Darren Tucker
[clientloop.h channels.h clientloop.c channels.c mux.c] The multiplexing escape char handler commit last night introduced a small memory leak per session; plug it.
2008-06-13 - djm@cvs.openbsd.org 2008/06/12 03:40:52Darren Tucker
[clientloop.h mux.c channels.c clientloop.c channels.h] Enable ~ escapes for multiplex slave sessions; give each channel its own escape state and hook the escape filters up to muxed channels. bz #1331 Mux slaves do not currently support the ~^Z and ~& escapes. NB. this change cranks the mux protocol version, so a new ssh mux client will not be able to connect to a running old ssh mux master. ok dtucker@
2008-06-12 - (djm) [channels.c configure.ac]Damien Miller
Do not set SO_REUSEADDR on wildcard X11 listeners (X11UseLocalhost=no) bz#1464; ok dtucker
2008-06-10 - dtucker@cvs.openbsd.org 2008/06/10 04:50:25Darren Tucker
[sshd.c channels.h channels.c log.c servconf.c log.h servconf.h sshd.8] Add extended test mode (-T) and connection parameters for test mode (-C). -T causes sshd to write its effective configuration to stdout and exit. -C causes any relevant Match rules to be applied before output. The combination allows tesing of the parser and config files. ok deraadt djm
2008-05-19 - markus@cvs.openbsd.org 2008/05/09 16:17:51Damien Miller
[channels.c] error-fd race: don't enable the error fd in the select bitmask for channels with both in- and output closed, since the channel will go away before we call select(); report, lots of debugging help and ok djm@
2008-05-19 - djm@cvs.openbsd.org 2008/05/09 04:55:56Damien Miller
[channels.c channels.h clientloop.c serverloop.c] Try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the first address and give up. Reported by stig AT venaas.com in bz#343 great feedback and ok markus@
2008-05-19 - djm@cvs.openbsd.org 2008/05/08 12:02:23Damien Miller
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c] [monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c] [ssh.c sshd.c] Implement a channel success/failure status confirmation callback mechanism. Each channel maintains a queue of callbacks, which will be drained in order (RFC4253 guarantees confirm messages are not reordered within an channel). Also includes a abandonment callback to clean up if a channel is closed without sending confirmation messages. This probably shouldn't happen in compliant implementations, but it could be abused to leak memory. ok markus@ (as part of a larger diff)
2008-05-19 - markus@cvs.openbsd.org 2008/05/08 06:59:01Damien Miller
[bufaux.c buffer.h channels.c packet.c packet.h] avoid extra malloc/copy/free when receiving data over the net; ~10% speedup for localhost-scp; ok djm@
2008-04-03 - markus@cvs.openbsd.org 2008/04/02 15:36:51Damien Miller
[channels.c] avoid possible hijacking of x11-forwarded connections (back out 1.183) CVE-2008-1483; ok djm@
2008-03-22* Patch from Red Hat / Fedora:Colin Watson
- Don't use X11 forwarding port which can't be bound on all address families (closes: #463011).
2008-02-10 - djm@cvs.openbsd.org 2008/01/19 23:02:40Damien Miller
[channels.c] When we added support for specified bind addresses for port forwards, we added a quirk SSH_OLD_FORWARD_ADDR. There is a bug in our handling of this for -L port forwards that causes the client to listen on both v4 and v6 addresses when connected to a server with this quirk, despite having set 0.0.0.0 as a bind_address. report and patch from Jan.Pechanec AT Sun.COM; ok dtucker@
2007-12-29 - dtucker@cvs.openbsd.org 2007/12/27 14:22:08Darren Tucker
[servconf.c canohost.c misc.c channels.c sshconnect.c misc.h ssh-keyscan.c sshd.c] Add a small helper function to consistently handle the EAI_SYSTEM error code of getaddrinfo. Prompted by vgiffin at apple com via bz #1417. ok markus@ stevesk@
2007-12-24* New upstream release (closes: #453367).Colin Watson
- CVE-2007-4752: Prevent ssh(1) from using a trusted X11 cookie if creation of an untrusted cookie fails; found and fixed by Jan Pechanec (closes: #444738). - sshd(8) in new installations defaults to SSH Protocol 2 only. Existing installations are unchanged. - The SSH channel window size has been increased, and both ssh(1) sshd(8) now send window updates more aggressively. These improves performance on high-BDP (Bandwidth Delay Product) networks. - ssh(1) and sshd(8) now preserve MAC contexts between packets, which saves 2 hash calls per packet and results in 12-16% speedup for arcfour256/hmac-md5. - A new MAC algorithm has been added, UMAC-64 (RFC4418) as "umac-64@openssh.com". UMAC-64 has been measured to be approximately 20% faster than HMAC-MD5. - Failure to establish a ssh(1) TunnelForward is now treated as a fatal error when the ExitOnForwardFailure option is set. - ssh(1) returns a sensible exit status if the control master goes away without passing the full exit status. - When using a ProxyCommand in ssh(1), set the outgoing hostname with gethostname(2), allowing hostbased authentication to work. - Make scp(1) skip FIFOs rather than hanging (closes: #246774). - Encode non-printing characters in scp(1) filenames. These could cause copies to be aborted with a "protocol error". - Handle SIGINT in sshd(8) privilege separation child process to ensure that wtmp and lastlog records are correctly updated. - Report GSSAPI mechanism in errors, for libraries that support multiple mechanisms. - Improve documentation for ssh-add(1)'s -d option. - Rearrange and tidy GSSAPI code, removing server-only code being linked into the client. - Delay execution of ssh(1)'s LocalCommand until after all forwardings have been established. - In scp(1), do not truncate non-regular files. - Improve exit message from ControlMaster clients. - Prevent sftp-server(8) from reading until it runs out of buffer space, whereupon it would exit with a fatal error (closes: #365541). - pam_end() was not being called if authentication failed (closes: #405041). - Manual page datestamps updated (closes: #433181).
2007-06-25 - dtucker@cvs.openbsd.org 2007/06/25 08:20:03Darren Tucker
[channels.c] Correct test for window updates every three packets; prevents sending window updates for every single packet. ok markus@
2007-06-18* Backport from upstream:Colin Watson
- Silence spurious error messages from hang-on-exit fix (http://bugzilla.mindrot.org/show_bug.cgi?id=1306, closes: #429531).
2007-06-12* New upstream release (closes: #395507, #397961, #420035). ImportantColin Watson
changes not previously backported to 4.3p2: - 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4): + On portable OpenSSH, fix a GSSAPI authentication abort that could be used to determine the validity of usernames on some platforms. + Implemented conditional configuration in sshd_config(5) using the "Match" directive. This allows some configuration options to be selectively overridden if specific criteria (based on user, group, hostname and/or address) are met. So far a useful subset of post-authentication options are supported and more are expected to be added in future releases. + Add support for Diffie-Hellman group exchange key agreement with a final hash of SHA256. + Added a "ForceCommand" directive to sshd_config(5). Similar to the command="..." option accepted in ~/.ssh/authorized_keys, this forces the execution of the specified command regardless of what the user requested. This is very useful in conjunction with the new "Match" option. + Add a "PermitOpen" directive to sshd_config(5). This mirrors the permitopen="..." authorized_keys option, allowing fine-grained control over the port-forwardings that a user is allowed to establish. + Add optional logging of transactions to sftp-server(8). + ssh(1) will now record port numbers for hosts stored in ~/.ssh/known_hosts when a non-standard port has been requested (closes: #50612). + Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a non-zero exit code) when requested port forwardings could not be established. + Extend sshd_config(5) "SubSystem" declarations to allow the specification of command-line arguments. + Replacement of all integer overflow susceptible invocations of malloc(3) and realloc(3) with overflow-checking equivalents. + Many manpage fixes and improvements. + Add optional support for OpenSSL hardware accelerators (engines), enabled using the --with-ssl-engine configure option. + Tokens in configuration files may be double-quoted in order to contain spaces (closes: #319639). + Move a debug() call out of a SIGCHLD handler, fixing a hang when the session exits very quickly (closes: #307890). + Fix some incorrect buffer allocation calculations (closes: #410599). + ssh-add doesn't ask for a passphrase if key file permissions are too liberal (closes: #103677). + Likewise, ssh doesn't ask either (closes: #99675). - 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6): + sshd now allows the enabling and disabling of authentication methods on a per user, group, host and network basis via the Match directive in sshd_config. + Fixed an inconsistent check for a terminal when displaying scp progress meter (closes: #257524). + Fix "hang on exit" when background processes are running at the time of exit on a ttyful/login session (closes: #88337). * Update to current GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch; install ChangeLog.gssapi.
2007-06-11 - markus@cvs.openbsd.org 2007/06/11 08:04:44Damien Miller
[channels.c] send 'window adjust' messages every tree packets and do not wait until 50% of the window is consumed. ok djm dtucker
2007-06-11 - (djm) Bugzilla #1306: silence spurious error messages from hang-on-exitDamien Miller
fix; tested by dtucker@ and jochen.kirn AT gmail.com
2007-01-29 - (djm) [channels.c serverloop.c] Fix so-called "hang on exit" (bz #52)Damien Miller
when closing a tty session when a background process still holds tty fds open. Great detective work and patch by Marc Aurele La France, slightly tweaked by me; ok dtucker@
2007-01-05 - stevesk@cvs.openbsd.org 2007/01/03 03:01:40Damien Miller
[auth2-chall.c channels.c dns.c sftp.c ssh-keygen.c ssh.c] spaces
2007-01-05 - djm@cvs.openbsd.org 2006/12/12 03:58:42Damien Miller
[channels.c compat.c compat.h] bz #1019: some ssh.com versions apparently can't cope with the remote port forwarding bind_address being a hostname, so send them an address for cases where they are not explicitly specified (wildcard or localhost bind). reported by daveroth AT acm.org; ok dtucker@ deraadt@
2006-08-30 - djm@cvs.openbsd.org 2006/08/29 10:40:19Damien Miller
[channels.c session.c] normalise some inconsistent (but harmless) NULL pointer checks spotted by the Stanford SATURN tool, via Isil Dillig; ok markus@ deraadt@
2006-08-05 - deraadt@cvs.openbsd.org 2006/08/03 03:34:42Damien Miller
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c] [auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ] [auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c] [buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c] [groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c] [key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c] [monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c] [readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h] [serverloop.c session.c session.h sftp-client.c sftp-common.c] [sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c] [ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c] [uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h] [loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h] almost entirely get rid of the culture of ".h files that include .h files" ok djm, sort of ok stevesk makes the pain stop in one easy step NB. portable commit contains everything *except* removing includes.h, as that will take a fair bit more work as we move headers that are required for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-08-05 - stevesk@cvs.openbsd.org 2006/08/01 23:36:12Damien Miller
[authfile.c channels.c progressmeter.c scard.c servconf.c ssh.c] clean extra spaces
2006-08-05 - stevesk@cvs.openbsd.org 2006/08/01 23:22:48Damien Miller
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c] [auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c] [channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c] [kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c] [monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c] [servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c] [uuencode.h xmalloc.c] move #include <stdio.h> out of includes.h
2006-08-05 - stevesk@cvs.openbsd.org 2006/07/26 13:57:17Damien Miller
[authfd.c authfile.c dh.c canohost.c channels.c clientloop.c compat.c] [hostfile.c kex.c log.c misc.c moduli.c monitor.c packet.c readpass.c] [scp.c servconf.c session.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c sshconnect.c] [sshconnect1.c sshd.c xmalloc.c] move #include <stdlib.h> out of includes.h
2006-08-05 - stevesk@cvs.openbsd.org 2006/07/25 02:59:21Damien Miller
[channels.c clientloop.c packet.c scp.c serverloop.c sftp-client.c] [sftp-server.c ssh-agent.c ssh-keyscan.c sshconnect.c sshd.c] move #include <sys/time.h> out of includes.h
2006-07-24 - (djm) [acss.c auth-krb5.c auth-options.c auth-pam.c auth-shadow.c]Damien Miller
[canohost.c channels.c cipher-acss.c defines.h dns.c gss-genr.c] [gss-serv-krb5.c gss-serv.c log.h loginrec.c logintest.c readconf.c] [servconf.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rand-helper.c] [ssh.c sshconnect.c sshd.c openbsd-compat/bindresvport.c] [openbsd-compat/bsd-arc4random.c openbsd-compat/bsd-misc.c] [openbsd-compat/getrrsetbyname.c openbsd-compat/glob.c] [openbsd-compat/mktemp.c openbsd-compat/port-linux.c] [openbsd-compat/port-tun.c openbsd-compat/readpassphrase.c] [openbsd-compat/setproctitle.c openbsd-compat/xmmap.c] make the portable tree compile again - sprinkle unistd.h and string.h back in. Don't redefine __unused, as it turned out to be used in headers on Linux, and replace its use in auth-pam.c with ARGSUSED
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/22 20:48:23Damien Miller
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c] [auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c] [authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c] [cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c] [compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c] [includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c] [progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c] move #include <string.h> out of includes.h
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/21 21:13:30Damien Miller
[channels.c] more ARGSUSED (lint) for dispatch table-driven functions; ok djm@
2006-07-24 - dtucker@cvs.openbsd.org 2006/07/21 12:43:36Damien Miller
[channels.c channels.h servconf.c servconf.h sshd_config.5] Make PermitOpen take a list of permitted ports and act more like most other keywords (ie the first match is the effective setting). This also makes it easier to override a previously set PermitOpen. ok djm@
2006-07-24 - dtucker@cvs.openbsd.org 2006/07/17 12:06:00Damien Miller
[channels.c channels.h servconf.c sshd_config.5] Add PermitOpen directive to sshd_config which is equivalent to the "permitopen" key option. Allows server admin to allow TCP port forwarding only two specific host/port pairs. Useful when combined with Match. If permitopen is used in both sshd_config and a key option, both must allow a given connection before it will be permitted. Note that users can still use external forwarders such as netcat, so to be those must be controlled too for the limits to be effective. Feedback & ok djm@, man page corrections & ok jmc@.
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/17 01:31:10Damien Miller
[authfd.c authfile.c channels.c cleanup.c clientloop.c groupaccess.c] [includes.h log.c misc.c msg.c packet.c progressmeter.c readconf.c] [readpass.c scp.c servconf.c sftp-client.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c] [sshconnect.c sshlogin.c sshpty.c uidswap.c] move #include <unistd.h> out of includes.h
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/12 22:28:52Damien Miller
[auth-options.c canohost.c channels.c includes.h readconf.c servconf.c ssh-keyscan.c ssh.c sshconnect.c sshd.c] move #include <netdb.h> out of includes.h; ok djm@
2006-07-12 - stevesk@cvs.openbsd.org 2006/07/11 20:07:25Darren Tucker
[scp.c auth.c monitor.c serverloop.c sftp-server.c sshpty.c readpass.c sshd.c monitor_wrap.c monitor_fdpass.c ssh-agent.c ttymodes.c atomicio.c includes.h session.c sshlogin.c monitor_mm.c packet.c sshconnect2.c sftp-client.c nchan.c clientloop.c sftp.c misc.c canohost.c channels.c ssh-keygen.c progressmeter.c uidswap.c msg.c readconf.c sshconnect.c] move #include <errno.h> out of includes.h; ok markus@
2006-07-12 - markus@cvs.openbsd.org 2006/07/11 18:50:48Darren Tucker
[clientloop.c ssh.1 ssh.c channels.c ssh_config.5 readconf.h session.c channels.h readconf.c] add ExitOnForwardFailure: terminate the connection if ssh(1) cannot set up all requested dynamic, local, and remote port forwardings. ok djm, dtucker, stevesk, jmc
2006-07-10 - djm@cvs.openbsd.org 2006/07/10 12:08:08Damien Miller
[channels.c] fix misparsing of SOCKS 5 packets that could result in a crash; reported by mk@ ok markus@
2006-07-10 - stevesk@cvs.openbsd.org 2006/07/03 17:59:32Damien Miller
[channels.c includes.h] move #include <arpa/inet.h> out of includes.h; old ok djm@ (portable needed session.c too)
2006-06-25 - (dtucker) [channels.c serverloop.c] Apply the bug #1102 workaround to ptysDarren Tucker
only, otherwise sshd can hang exiting non-interactive sessions.
2006-06-23 - (dtucker) [channels.c configure.ac serverloop.c] Bug #1102: Around AIXDarren Tucker
4.3.3 ML3 or so, the AIX pty layer starting passing zero-length writes on the pty slave as zero-length reads on the pty master, which sshd interprets as the descriptor closing. Since most things don't do zero length writes this rarely matters, but occasionally it happens, and when it does the SSH pty session appears to hang, so we add a special case for this condition. ok djm@
2006-05-12Merge 4.3p2 to the trunk.Colin Watson