| Age | Commit message (Collapse) | Author |
|---|
|
[canohost.c canohost.h channels.c channels.h clientloop.c readconf.c]
[readconf.h serverloop.c ssh.c]
support remote port forwarding with a zero listen port (-R0:...) to
dyamically allocate a listen port at runtime (this is actually
specified in rfc4254); bz#1003 ok markus@
|
|
[channels.c channels.h session.c]
make Channel->path an allocated string, saving a few bytes here and
there and fixing bz#1380 in the process; ok markus@
|
|
[channels.c channels.h session.c]
don't call isatty() on a pty master, instead pass a flag down to
channel_set_fds() indicating that te fds refer to a tty. Fixes a
hang on exit on Solaris (bz#1463) in portable but is actually
a generic bug; ok dtucker deraadt markus
|
|
[clientloop.h channels.h clientloop.c channels.c mux.c]
The multiplexing escape char handler commit last night introduced a
small memory leak per session; plug it.
|
|
[clientloop.h mux.c channels.c clientloop.c channels.h]
Enable ~ escapes for multiplex slave sessions; give each channel
its own escape state and hook the escape filters up to muxed
channels. bz #1331
Mux slaves do not currently support the ~^Z and ~& escapes.
NB. this change cranks the mux protocol version, so a new ssh
mux client will not be able to connect to a running old ssh
mux master.
ok dtucker@
|
|
[sshd.c channels.h channels.c log.c servconf.c log.h servconf.h sshd.8]
Add extended test mode (-T) and connection parameters for test mode (-C).
-T causes sshd to write its effective configuration to stdout and exit.
-C causes any relevant Match rules to be applied before output. The
combination allows tesing of the parser and config files. ok deraadt djm
|
|
[channels.h clientloop.c nchan.c serverloop.c]
unbreak
ssh -2 localhost od /bin/ls | true
ignoring SIGPIPE by adding a new channel message (EOW) that signals
the peer that we're not interested in any data it might send.
fixes bz #85; discussion, debugging and ok djm@
|
|
[channels.c channels.h clientloop.c serverloop.c]
Try additional addresses when connecting to a port forward destination
whose DNS name resolves to more than one address. The previous behaviour
was to try the first address and give up.
Reported by stig AT venaas.com in bz#343
great feedback and ok markus@
|
|
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c]
[monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c]
[ssh.c sshd.c]
Implement a channel success/failure status confirmation callback
mechanism. Each channel maintains a queue of callbacks, which will
be drained in order (RFC4253 guarantees confirm messages are not
reordered within an channel).
Also includes a abandonment callback to clean up if a channel is
closed without sending confirmation messages. This probably
shouldn't happen in compliant implementations, but it could be
abused to leak memory.
ok markus@ (as part of a larger diff)
|
|
[channels.h]
increase default channel windows; ok djm
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[channels.c channels.h servconf.c servconf.h sshd_config.5]
Make PermitOpen take a list of permitted ports and act more like most
other keywords (ie the first match is the effective setting). This
also makes it easier to override a previously set PermitOpen. ok djm@
|
|
[channels.c channels.h servconf.c sshd_config.5]
Add PermitOpen directive to sshd_config which is equivalent to the
"permitopen" key option. Allows server admin to allow TCP port
forwarding only two specific host/port pairs. Useful when combined
with Match.
If permitopen is used in both sshd_config and a key option, both
must allow a given connection before it will be permitted.
Note that users can still use external forwarders such as netcat,
so to be those must be controlled too for the limits to be effective.
Feedback & ok djm@, man page corrections & ok jmc@.
|
|
[clientloop.c ssh.1 ssh.c channels.c ssh_config.5 readconf.h session.c
channels.h readconf.c]
add ExitOnForwardFailure: terminate the connection if ssh(1)
cannot set up all requested dynamic, local, and remote port
forwardings. ok djm, dtucker, stevesk, jmc
|
|
[atomicio.h auth-options.h auth.h auth2-gss.c authfd.h authfile.h]
[bufaux.h buffer.h canohost.h channels.h cipher.h clientloop.h]
[compat.h compress.h crc32.c crc32.h deattack.h dh.h dispatch.h]
[dns.c dns.h getput.h groupaccess.h gss-genr.c gss-serv-krb5.c]
[gss-serv.c hostfile.h includes.h kex.h key.h log.h mac.h match.h]
[misc.h monitor.h monitor_fdpass.h monitor_mm.h monitor_wrap.h msg.h]
[myproposal.h packet.h pathnames.h progressmeter.h readconf.h rsa.h]
[scard.h servconf.h serverloop.h session.h sftp-common.h sftp.h]
[ssh-gss.h ssh.h ssh1.h ssh2.h sshconnect.h sshlogin.h sshpty.h]
[ttymodes.h uidswap.h uuencode.h xmalloc.h]
standardise spacing in $OpenBSD$ tags; requested by deraadt@
|
|
[channels.c channels.h clientloop.c]
add channel output filter interface.
ok djm@, suggested by markus@
|
|
[channels.c channels.h session.c]
make sure protocol messages for internal channels are ignored.
allow adjust messages for non-open channels; with and ok djm@
|
|
[auth-options.c auth-options.h channels.c channels.h clientloop.c]
[misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h]
[serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c]
[sshconnect.h sshd.8 sshd_config sshd_config.5]
Add support for tun(4) forwarding over OpenSSH, based on an idea and
initial channel code bits by markus@. This is a simple and easy way to
use OpenSSH for ad hoc virtual private network connections, e.g.
administrative tunnels or secure wireless access. It's based on a new
ssh channel and works similar to the existing TCP forwarding support,
except that it depends on the tun(4) network interface on both ends of
the connection for layer 2 or layer 3 tunneling. This diff also adds
support for LocalCommand in the ssh(1) client.
ok djm@, markus@, jmc@ (manpages), tested and discussed with others
|
|
[channels.c channels.h clientloop.c serverloop.c session.c]
fix regression I introduced in 4.2: X11 forwardings initiated after
a session has exited (e.g. "(sleep 5; xterm) &") would not start.
bz #1086 reported by t8m AT centrum.cz; ok markus@ dtucker@
|
|
- djm@cvs.openbsd.org 2005/07/17 06:49:04
[channels.c channels.h session.c session.h]
Fix a number of X11 forwarding channel leaks:
1. Refuse multiple X11 forwarding requests on the same session
2. Clean up all listeners after a single_connection X11 forward, not just
the one that made the single connection
3. Destroy X11 listeners when the session owning them goes away
testing and ok dtucker@
|
|
[channels.h]
race when efd gets closed while there is still buffered data:
change CHANNEL_EFD_OUTPUT_ACTIVE()
1) c->efd must always be valid AND
2a) no EOF has been seen OR
2b) there is buffered data
report, initial fix and testing Chuck Cranor
|
|
- djm@cvs.openbsd.org 2005/06/16 03:38:36
[channels.c channels.h clientloop.c clientloop.h ssh.c]
move x11_get_proto from ssh.c to clientloop.c, to make muliplexed xfwd
easier later; ok deraadt@
|
|
[auth-options.c channels.c channels.h clientloop.c compat.c compat.h]
[misc.c misc.h readconf.c readconf.h servconf.c ssh.1 ssh.c ssh_config.5]
[sshd_config.5]
bz#413: allow optional specification of bind address for port forwardings.
Patch originally by Dan Astorian, but worked on by several people
Adds GatewayPorts=clientspecified option on server to allow remote
forwards to bind to client-specified ports.
|
|
[channels.c channels.h clientloop.c]
fix some window size change bugs for multiplexed connections: windows sizes
were not being updated if they had changed after ~^Z suspends and SIGWINCH
was not being processed unless the first connection had requested a tty;
ok markus
|
|
[channels.c channels.h clientloop.c misc.c misc.h serverloop.c ssh-agent.c]
some signed/unsigned int comparison cleanups; markus@ ok
|
|
[channels.c channels.h clientloop.c clientloop.h includes.h readconf.c]
[readconf.h scp.1 sftp.1 ssh.1 ssh.c ssh_config.5]
implement session multiplexing in the client (the server has supported
this since 2.0); ok markus@
|
|
[channels.c channels.h clientloop.c serverloop.c ssh.1]
bz #756: add support for the cancel-tcpip-forward request for the server and
the client (through the ~C commandline). reported by z3p AT twistedmatrix.com;
ok markus@
|
|
[channels.c channels.h clientloop.c]
move client only agent code to clientloop.c
|
|
|
|
[channels.c channels.h clientloop.c serverloop.c]
move channel counter to u_int
|
|
[channels.c channels.h session.c session.h]
display, screen, row, col, xpixel, ypixel are u_int; markus ok
- (bal) Also fixed IPADDR_IN_DISPLAY case where display, screen, row, col,
xpixel are u_int.
|
|
[channels.c channels.h session.c]
move creation of agent socket to session.c; no need for uidswapping
in channel.c.
|
|
[channels.h]
CHANNEL_EFD_OUTPUT_ACTIVE is false for CHAN_CLOSE_RCVD, too
|
|
[channels.c channels.h compat.c compat.h nchan.c]
don't send stderr data after EOF, accept this from older known (broken)
sshd servers only, fixes http://bugzilla.mindrot.org/show_bug.cgi?id=179
|
|
[auth-krb5.c auth-options.h auth.h authfd.h authfile.h bufaux.h buffer.h
channels.h cipher.h compat.h compress.h crc32.h deattack.c getput.h
groupaccess.c misc.c mpaux.h packet.h readconf.h rsa.h scard.h
servconf.h ssh-agent.c ssh.h ssh2.h sshpty.h sshtty.c ttymodes.h
uuencode.c xmalloc.h]
$OpenBSD$ and RCSID() cleanup: don't use RCSID() in .h files; add
missing RCSID() to .c files and remove dup /*$OpenBSD$*/ from .c
files. ok markus@
|
|
[channels.h session.c ssh.c]
increase the SSH v2 window size to 4 packets. comsumes a little
bit more memory for slow receivers but increases througput.
|
|
[channels.c channels.h ssh.c]
merge channel_request() into channel_request_start()
|
|
[channels.c channels.h ssh.c]
generic callbacks are not really used, remove and
add a callback for msg of type SSH2_MSG_CHANNEL_OPEN_CONFIRMATION
ok djm@
|
|
[channels.c channels.h]
remove unused channel_input_channel_request
|
|
[channels.c channels.h serverloop.c ssh.c]
wrapper for channel_setup_fwd_listener
|
|
[channels.h nchan.c]
(c) 2002
|
|
[channels.c channels.h nchan.c]
remove function pointers for events, remove chan_init*; ok provos@
|
|
[channels.h nchan.c]
add chan_set_[io]state(), order states, state is now an u_int,
simplifies debugging messages; ok provos@
|
|
[auth2.c auth2-chall.c channels.c channels.h clientloop.c dispatch.c dispatch.h kex.c kex.h serverloop.c ssh.c sshconnect2.c]
remove plen from the dispatch fn. it's no longer used.
|
|
[auth2.c auth2-chall.c channels.c channels.h clientloop.c dispatch.c]
[dispatch.h kex.c kex.h packet.c packet.h serverloop.c ssh.c]
[sshconnect2.c]
Conformance fix: we should send failing packet sequence number when
responding with a SSH_MSG_UNIMPLEMENTED message. Spotted by
yakk@yakk.dot.net; ok markus@
|
|
[channels.c channels.h session.c]
setup x11 listen socket for just one connect if the client requests so.
(v2 only, but the openssh client does not support this feature).
|
|
- stevesk@cvs.openbsd.org 2001/11/29 14:10:51
[channels.h channels.c session.c]
sshd X11 fake server will now listen on localhost by default:
$ echo $DISPLAY
localhost:12.0
$ netstat -an|grep 6012
tcp 0 0 127.0.0.1.6012 *.* LISTEN
tcp6 0 0 ::1.6012 *.* LISTEN
sshd_config gatewayports=yes can be used to revert back to the old
behavior. will control this with another option later. ok markus@
- stevesk@cvs.openbsd.org 2001/12/19 08:43:11
[includes.h session.c]
handle utsname.nodename case for FamilyLocal X authorization; ok markus@
|
|
[channels.h]
remove dead function prototype; ok markus@
|
|
[channels.h]
crank c->path to 256 so they can hold a full hostname; dwd@bell-labs.com
|
|
- markus@cvs.openbsd.org 2001/10/10 22:18:47
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c session.h]
try to keep channels open until an exit-status message is sent.
don't kill the login shells if the shells stdin/out/err is closed.
this should now work:
ssh -2n localhost 'exec > /dev/null 2>&1; sleep 10; exit 5'; echo ?
|
