| Age | Commit message (Collapse) | Author |
|---|
|
Add 'reverse' dynamic forwarding which combines dynamic
forwarding (-D) with remote forwarding (-R) where the remote-forwarded port
expects SOCKS-requests.
The SSH server code is unchanged and the parsing happens at the SSH
clients side. Thus the full SOCKS-request is sent over the forwarded
channel and the client parses c->output. Parsing happens in
channel_before_prepare_select(), _before_ the select bitmask is
computed in the pre[] handlers, but after network input processing
in the post[] handlers.
help and ok djm@
Upstream-ID: aa25a6a3851064f34fe719e0bf15656ad5a64b89
|
|
Make remote channel ID a u_int
Previously we tracked the remote channel IDs in an int, but this is
strictly incorrect: the wire protocol uses uint32 and there is nothing
in-principle stopping a SSH implementation from sending, say, 0xffff0000.
In practice everyone numbers their channels sequentially, so this has
never been a problem.
ok markus@
Upstream-ID: b9f4cd3dc53155b4a5c995c0adba7da760d03e73
|
|
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
|
|
pass packet state down to some of the channels function
(more to come...); ok markus@
Upstream-ID: d8ce7a94f4059d7ac1e01fb0eb01de0c4b36c81b
|
|
protocol handlers all get struct ssh passed; ok djm@
Upstream-ID: 0ca9ea2a5d01a6d2ded94c5024456a930c5bfb5d
|
|
remove SSH_CHANNEL_XXX_DRAINING (ssh1 only); ok djm@
Upstream-ID: e2e225b6ac67b84dd024f38819afff2554fafe42
|
|
remove channel_input_close_confirmation (ssh1 only); ok
djm@
Upstream-ID: 8e7c8c38f322d255bb0294a5c0ebef53fdf576f1
|
|
obliterate ssh1.h and some dead code that used it
ok markus@
Upstream-ID: 1ca9159a9fb95618f9d51e069ac8e1131a087343
|
|
remove compat20/compat13/compat15 variables
ok markus@
Upstream-ID: 43802c035ceb3fef6c50c400e4ecabf12354691c
|
|
Return true reason for port forwarding failures where
feasible rather than always "administratively prohibited". bz#2674, ok djm@
Upstream-ID: d901d9887951774e604ca970e1827afaaef9e419
|
|
Remove channel_input_port_forward_request(); the only caller
was the recently-removed SSH1 server code so it's now dead code. ok markus@
Upstream-ID: 05453983230a1f439562535fec2818f63f297af9
|
|
ssh proxy mux mode (-O proxy; idea from Simon Tatham): - mux
client speaks the ssh-packet protocol directly over unix-domain socket. - mux
server acts as a proxy, translates channel IDs and relays to the server. - no
filedescriptor passing necessary. - combined with unix-domain forwarding it's
even possible to run mux client and server on different machines. feedback
& ok djm@
Upstream-ID: 666a2fb79f58e5c50e246265fb2b9251e505c25b
|
|
better refuse ForwardX11Trusted=no connections attempted
after ForwardX11Timeout expires; reported by Jann Horn
Upstream-ID: bf0fddadc1b46a0334e26c080038313b4b6dea21
|
|
moar whitespace at eol
Upstream-ID: 64eaf872a3ba52ed41e494287e80d40aaba4b515
|
|
move dispatch to struct ssh; ok djm@
|
|
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
|
|
[channels.c channels.h clientloop.c ssh.c]
fix remote fwding with same listen port but different listen address
with gerhard@, ok djm@
|
|
blocking connecting socket will clear any stored errno that might
otherwise have been retrievable via getsockopt(). A hack to limit writes
to TTYs on AIX was triggering this. Since only AIX needs the hack, wrap
it in an #ifdef. Diagnosis and patch from Ivo Raisr.
|
|
[channels.c channels.h clientloop.c]
Add an "ABANDONED" channel state and use for mux sessions that are
disconnected via the ~. escape sequence. Channels in this state will
be able to close if the server responds, but do not count as active channels.
This means that if you ~. all of the mux clients when using ControlPersist
on a broken network, the backgrounded mux master will exit when the
Control Persist time expires rather than hanging around indefinitely.
bz#1917, also reported and tested by tedu@. ok djm@ markus@.
|
|
[channels.h]
typo in comment
|
|
[channels.c channels.h clientloop.c serverloop.c]
don't spin in accept() when out of fds (ENFILE/ENFILE) - back off for a
while; ok deraadt@ markus@
|
|
[channels.c channels.h servconf.c]
Add PermitOpen none option based on patch from Loganaden Velvindron
(bz #1949). ok djm@
|
|
[mux.c readconf.h channels.h compat.h compat.c ssh.c readconf.c channels.c version.h]
unbreak remote portforwarding with dynamic allocated listen ports:
1) send the actual listen port in the open message (instead of 0).
this allows multiple forwardings with a dynamic listen port
2) update the matching permit-open entry, so we can identify where
to connect to
report: den at skbkontur.ru and P. Szczygielski
feedback and ok djm@
|
|
[channels.c auth-options.c servconf.c channels.h sshd.8]
Add wildcard support to PermitOpen, allowing things like "PermitOpen
localhost:*". bz #1857, ok djm markus.
|
|
[channels.c channels.h clientloop.c ssh.1]
support cancellation of local/dynamic forwardings from ~C commandline;
ok & feedback djm@
|
|
[channels.c channels.h clientloop.h mux.c ssh.c]
support for cancelling local and remote port forwards via the multiplex
socket. Use ssh -O cancel -L xx:xx:xx -R yy:yy:yy user@host" to request
the cancellation of the specified forwardings; ok markus@
|
|
[channels.c channels.h clientloop.c clientloop.h mux.c ssh.c]
hook up a channel confirm callback to warn the user then requested X11
forwarding was refused by the server; ok markus@
|
|
[channels.c channels.h mux.c ssh.c]
Pause the mux channel while waiting for reply from aynch callbacks.
Prevents misordering of replies if new requests arrive while waiting.
Extend channel open confirm callback to allow signalling failure
conditions as well as success. Use this to 1) fix a memory leak, 2)
start using the above pause mechanism and 3) delay sending a success/
failure message on mux slave session open until we receive a reply from
the server.
motivated by and with feedback from markus@
|
|
[channels.c channels.h clientloop.c clientloop.h mux.c nchan.c ssh.c]
rewrite ssh(1) multiplexing code to a more sensible protocol.
The new multiplexing code uses channels for the listener and
accepted control sockets to make the mux master non-blocking, so
no stalls when processing messages from a slave.
avoid use of fatal() in mux master protocol parsing so an errant slave
process cannot take down a running master.
implement requesting of port-forwards over multiplexed sessions. Any
port forwards requested by the slave are added to those the master has
established.
add support for stdio forwarding ("ssh -W host:port ...") in mux slaves.
document master/slave mux protocol so that other tools can use it to
control a running ssh(1). Note: there are no guarantees that this
protocol won't be incompatibly changed (though it is versioned).
feedback Salvador Fandino, dtucker@
channel changes ok markus@
|
|
[ssh_config channels.c ssh.1 channels.h ssh.c]
Add a 'netcat mode' (ssh -W). This connects stdio on the client to a
single port forward on the server. This allows, for example, using ssh as
a ProxyCommand to route connections via intermediate servers.
bz #1618, man page help from jmc@, ok markus@
|
|
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
|
|
[channels.c channels.h]
fix race condition in x11/agent channel allocation: don't read after
the end of the select read/write fdset and make sure a reused FD
is not touched before the pre-handlers are called.
with and ok djm@
|
|
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
|
|
[canohost.c canohost.h channels.c channels.h clientloop.c readconf.c]
[readconf.h serverloop.c ssh.c]
support remote port forwarding with a zero listen port (-R0:...) to
dyamically allocate a listen port at runtime (this is actually
specified in rfc4254); bz#1003 ok markus@
|
|
[channels.c channels.h session.c]
make Channel->path an allocated string, saving a few bytes here and
there and fixing bz#1380 in the process; ok markus@
|
|
[channels.c channels.h session.c]
don't call isatty() on a pty master, instead pass a flag down to
channel_set_fds() indicating that te fds refer to a tty. Fixes a
hang on exit on Solaris (bz#1463) in portable but is actually
a generic bug; ok dtucker deraadt markus
|
|
[clientloop.h channels.h clientloop.c channels.c mux.c]
The multiplexing escape char handler commit last night introduced a
small memory leak per session; plug it.
|
|
[clientloop.h mux.c channels.c clientloop.c channels.h]
Enable ~ escapes for multiplex slave sessions; give each channel
its own escape state and hook the escape filters up to muxed
channels. bz #1331
Mux slaves do not currently support the ~^Z and ~& escapes.
NB. this change cranks the mux protocol version, so a new ssh
mux client will not be able to connect to a running old ssh
mux master.
ok dtucker@
|
|
[sshd.c channels.h channels.c log.c servconf.c log.h servconf.h sshd.8]
Add extended test mode (-T) and connection parameters for test mode (-C).
-T causes sshd to write its effective configuration to stdout and exit.
-C causes any relevant Match rules to be applied before output. The
combination allows tesing of the parser and config files. ok deraadt djm
|
|
[channels.h clientloop.c nchan.c serverloop.c]
unbreak
ssh -2 localhost od /bin/ls | true
ignoring SIGPIPE by adding a new channel message (EOW) that signals
the peer that we're not interested in any data it might send.
fixes bz #85; discussion, debugging and ok djm@
|
|
[channels.c channels.h clientloop.c serverloop.c]
Try additional addresses when connecting to a port forward destination
whose DNS name resolves to more than one address. The previous behaviour
was to try the first address and give up.
Reported by stig AT venaas.com in bz#343
great feedback and ok markus@
|
|
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c]
[monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c]
[ssh.c sshd.c]
Implement a channel success/failure status confirmation callback
mechanism. Each channel maintains a queue of callbacks, which will
be drained in order (RFC4253 guarantees confirm messages are not
reordered within an channel).
Also includes a abandonment callback to clean up if a channel is
closed without sending confirmation messages. This probably
shouldn't happen in compliant implementations, but it could be
abused to leak memory.
ok markus@ (as part of a larger diff)
|
|
[channels.h]
increase default channel windows; ok djm
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[channels.c channels.h servconf.c servconf.h sshd_config.5]
Make PermitOpen take a list of permitted ports and act more like most
other keywords (ie the first match is the effective setting). This
also makes it easier to override a previously set PermitOpen. ok djm@
|
|
[channels.c channels.h servconf.c sshd_config.5]
Add PermitOpen directive to sshd_config which is equivalent to the
"permitopen" key option. Allows server admin to allow TCP port
forwarding only two specific host/port pairs. Useful when combined
with Match.
If permitopen is used in both sshd_config and a key option, both
must allow a given connection before it will be permitted.
Note that users can still use external forwarders such as netcat,
so to be those must be controlled too for the limits to be effective.
Feedback & ok djm@, man page corrections & ok jmc@.
|
|
[clientloop.c ssh.1 ssh.c channels.c ssh_config.5 readconf.h session.c
channels.h readconf.c]
add ExitOnForwardFailure: terminate the connection if ssh(1)
cannot set up all requested dynamic, local, and remote port
forwardings. ok djm, dtucker, stevesk, jmc
|
|
[atomicio.h auth-options.h auth.h auth2-gss.c authfd.h authfile.h]
[bufaux.h buffer.h canohost.h channels.h cipher.h clientloop.h]
[compat.h compress.h crc32.c crc32.h deattack.h dh.h dispatch.h]
[dns.c dns.h getput.h groupaccess.h gss-genr.c gss-serv-krb5.c]
[gss-serv.c hostfile.h includes.h kex.h key.h log.h mac.h match.h]
[misc.h monitor.h monitor_fdpass.h monitor_mm.h monitor_wrap.h msg.h]
[myproposal.h packet.h pathnames.h progressmeter.h readconf.h rsa.h]
[scard.h servconf.h serverloop.h session.h sftp-common.h sftp.h]
[ssh-gss.h ssh.h ssh1.h ssh2.h sshconnect.h sshlogin.h sshpty.h]
[ttymodes.h uidswap.h uuencode.h xmalloc.h]
standardise spacing in $OpenBSD$ tags; requested by deraadt@
|
|
[channels.c channels.h clientloop.c]
add channel output filter interface.
ok djm@, suggested by markus@
|
|
[channels.c channels.h session.c]
make sure protocol messages for internal channels are ignored.
allow adjust messages for non-open channels; with and ok djm@
|
