| Age | Commit message (Collapse) | Author |
|---|
|
[channels.c channels.h session.c]
make sure protocol messages for internal channels are ignored.
allow adjust messages for non-open channels; with and ok djm@
|
|
[auth-options.c auth-options.h channels.c channels.h clientloop.c]
[misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h]
[serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c]
[sshconnect.h sshd.8 sshd_config sshd_config.5]
Add support for tun(4) forwarding over OpenSSH, based on an idea and
initial channel code bits by markus@. This is a simple and easy way to
use OpenSSH for ad hoc virtual private network connections, e.g.
administrative tunnels or secure wireless access. It's based on a new
ssh channel and works similar to the existing TCP forwarding support,
except that it depends on the tun(4) network interface on both ends of
the connection for layer 2 or layer 3 tunneling. This diff also adds
support for LocalCommand in the ssh(1) client.
ok djm@, markus@, jmc@ (manpages), tested and discussed with others
|
|
[channels.c channels.h clientloop.c serverloop.c session.c]
fix regression I introduced in 4.2: X11 forwardings initiated after
a session has exited (e.g. "(sleep 5; xterm) &") would not start.
bz #1086 reported by t8m AT centrum.cz; ok markus@ dtucker@
|
|
- djm@cvs.openbsd.org 2005/07/17 06:49:04
[channels.c channels.h session.c session.h]
Fix a number of X11 forwarding channel leaks:
1. Refuse multiple X11 forwarding requests on the same session
2. Clean up all listeners after a single_connection X11 forward, not just
the one that made the single connection
3. Destroy X11 listeners when the session owning them goes away
testing and ok dtucker@
|
|
[channels.h]
race when efd gets closed while there is still buffered data:
change CHANNEL_EFD_OUTPUT_ACTIVE()
1) c->efd must always be valid AND
2a) no EOF has been seen OR
2b) there is buffered data
report, initial fix and testing Chuck Cranor
|
|
- djm@cvs.openbsd.org 2005/06/16 03:38:36
[channels.c channels.h clientloop.c clientloop.h ssh.c]
move x11_get_proto from ssh.c to clientloop.c, to make muliplexed xfwd
easier later; ok deraadt@
|
|
[auth-options.c channels.c channels.h clientloop.c compat.c compat.h]
[misc.c misc.h readconf.c readconf.h servconf.c ssh.1 ssh.c ssh_config.5]
[sshd_config.5]
bz#413: allow optional specification of bind address for port forwardings.
Patch originally by Dan Astorian, but worked on by several people
Adds GatewayPorts=clientspecified option on server to allow remote
forwards to bind to client-specified ports.
|
|
[channels.c channels.h clientloop.c]
fix some window size change bugs for multiplexed connections: windows sizes
were not being updated if they had changed after ~^Z suspends and SIGWINCH
was not being processed unless the first connection had requested a tty;
ok markus
|
|
[channels.c channels.h clientloop.c misc.c misc.h serverloop.c ssh-agent.c]
some signed/unsigned int comparison cleanups; markus@ ok
|
|
[channels.c channels.h clientloop.c clientloop.h includes.h readconf.c]
[readconf.h scp.1 sftp.1 ssh.1 ssh.c ssh_config.5]
implement session multiplexing in the client (the server has supported
this since 2.0); ok markus@
|
|
[channels.c channels.h clientloop.c serverloop.c ssh.1]
bz #756: add support for the cancel-tcpip-forward request for the server and
the client (through the ~C commandline). reported by z3p AT twistedmatrix.com;
ok markus@
|
|
[channels.c channels.h clientloop.c]
move client only agent code to clientloop.c
|
|
|
|
[channels.c channels.h clientloop.c serverloop.c]
move channel counter to u_int
|
|
[channels.c channels.h session.c session.h]
display, screen, row, col, xpixel, ypixel are u_int; markus ok
- (bal) Also fixed IPADDR_IN_DISPLAY case where display, screen, row, col,
xpixel are u_int.
|
|
[channels.c channels.h session.c]
move creation of agent socket to session.c; no need for uidswapping
in channel.c.
|
|
[channels.h]
CHANNEL_EFD_OUTPUT_ACTIVE is false for CHAN_CLOSE_RCVD, too
|
|
[channels.c channels.h compat.c compat.h nchan.c]
don't send stderr data after EOF, accept this from older known (broken)
sshd servers only, fixes http://bugzilla.mindrot.org/show_bug.cgi?id=179
|
|
[auth-krb5.c auth-options.h auth.h authfd.h authfile.h bufaux.h buffer.h
channels.h cipher.h compat.h compress.h crc32.h deattack.c getput.h
groupaccess.c misc.c mpaux.h packet.h readconf.h rsa.h scard.h
servconf.h ssh-agent.c ssh.h ssh2.h sshpty.h sshtty.c ttymodes.h
uuencode.c xmalloc.h]
$OpenBSD$ and RCSID() cleanup: don't use RCSID() in .h files; add
missing RCSID() to .c files and remove dup /*$OpenBSD$*/ from .c
files. ok markus@
|
|
[channels.h session.c ssh.c]
increase the SSH v2 window size to 4 packets. comsumes a little
bit more memory for slow receivers but increases througput.
|
|
[channels.c channels.h ssh.c]
merge channel_request() into channel_request_start()
|
|
[channels.c channels.h ssh.c]
generic callbacks are not really used, remove and
add a callback for msg of type SSH2_MSG_CHANNEL_OPEN_CONFIRMATION
ok djm@
|
|
[channels.c channels.h]
remove unused channel_input_channel_request
|
|
[channels.c channels.h serverloop.c ssh.c]
wrapper for channel_setup_fwd_listener
|
|
[channels.h nchan.c]
(c) 2002
|
|
[channels.c channels.h nchan.c]
remove function pointers for events, remove chan_init*; ok provos@
|
|
[channels.h nchan.c]
add chan_set_[io]state(), order states, state is now an u_int,
simplifies debugging messages; ok provos@
|
|
[auth2.c auth2-chall.c channels.c channels.h clientloop.c dispatch.c dispatch.h kex.c kex.h serverloop.c ssh.c sshconnect2.c]
remove plen from the dispatch fn. it's no longer used.
|
|
[auth2.c auth2-chall.c channels.c channels.h clientloop.c dispatch.c]
[dispatch.h kex.c kex.h packet.c packet.h serverloop.c ssh.c]
[sshconnect2.c]
Conformance fix: we should send failing packet sequence number when
responding with a SSH_MSG_UNIMPLEMENTED message. Spotted by
yakk@yakk.dot.net; ok markus@
|
|
[channels.c channels.h session.c]
setup x11 listen socket for just one connect if the client requests so.
(v2 only, but the openssh client does not support this feature).
|
|
- stevesk@cvs.openbsd.org 2001/11/29 14:10:51
[channels.h channels.c session.c]
sshd X11 fake server will now listen on localhost by default:
$ echo $DISPLAY
localhost:12.0
$ netstat -an|grep 6012
tcp 0 0 127.0.0.1.6012 *.* LISTEN
tcp6 0 0 ::1.6012 *.* LISTEN
sshd_config gatewayports=yes can be used to revert back to the old
behavior. will control this with another option later. ok markus@
- stevesk@cvs.openbsd.org 2001/12/19 08:43:11
[includes.h session.c]
handle utsname.nodename case for FamilyLocal X authorization; ok markus@
|
|
[channels.h]
remove dead function prototype; ok markus@
|
|
[channels.h]
crank c->path to 256 so they can hold a full hostname; dwd@bell-labs.com
|
|
- markus@cvs.openbsd.org 2001/10/10 22:18:47
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c session.h]
try to keep channels open until an exit-status message is sent.
don't kill the login shells if the shells stdin/out/err is closed.
this should now work:
ssh -2n localhost 'exec > /dev/null 2>&1; sleep 10; exit 5'; echo ?
|
|
[channels.c channels.h serverloop.c session.c session.h]
simplify session close: no more delayed session_close, no more blocking wait() calls.
|
|
[channels.c channels.h]
avoid possible FD_ISSET overflow for channels established
during channnel_after_select() (used for dynamic channels).
|
|
[channels.c channels.h ssh.c sshd.c]
remove ugliness; vp@drexel.edu via angelos
|
|
[channels.c channels.h clientloop.c]
try to fix agent-forwarding-backconnection-bug, as seen on HPUX,
for example; with Lutz.Jaenicke@aet.TU-Cottbus.DE,
|
|
[channels.c channels.h clientloop.c nchan.c serverloop.c]
keep track of both maxfd and the size of the malloc'ed fdsets.
update maxfd if maxfd gets closed.
|
|
[channels.c channels.h serverloop.c]
improve cleanup/exit logic in ssh2:
stop listening to channels, detach channel users (e.g. sessions).
wait for children (i.e. dying sessions), send exit messages,
cleanup all channels.
|
|
[channels.c channels.h clientloop.c]
adress -> address; ok markus@
|
|
[authfd.h authfile.h auth.h auth-options.h bufaux.h buffer.h
canohost.h channels.h cipher.h clientloop.h compat.h compress.h
crc32.h deattack.h dh.h dispatch.h groupaccess.c groupaccess.h
hostfile.h kex.h key.h log.c log.h mac.h misc.c misc.h mpaux.h
packet.h radix.h readconf.h readpass.h rsa.h servconf.h serverloop.h
session.h sftp-common.c sftp-common.h sftp-glob.h sftp-int.h
sshconnect.h ssh-dss.h sshlogin.h sshpty.h ssh-rsa.h sshtty.h
tildexpand.h uidswap.h uuencode.h xmalloc.h]
remove comments from .h, since they are cut&paste from the .c files
and out of sync
|
|
[atomicio.h authfd.h authfile.h auth.h auth-options.h bufaux.h
buffer.h canohost.h channels.h cipher.h clientloop.h compat.h
compress.h crc32.h deattack.h dh.h dispatch.h groupaccess.h
hostfile.h kex.h key.h log.h mac.h match.h misc.h mpaux.h packet.h
radix.h readconf.h readpass.h rsa.h]
prototype pedant. not very creative...
- () -> (void)
- no variable names
|
|
[channels.c channels.h cipher.c clientloop.c compat.c compat.h
hostfile.c kex.c kex.h key.c key.h nchan.c packet.c serverloop.c
session.c session.h sftp-server.c ssh-add.c ssh-agent.c uuencode.h]
update copyright for 2001
|
|
[channels.c channels.h clientloop.c packet.c serverloop.c]
move from channel_stop_listening to channel_free_all,
call channel_free_all before calling waitpid() in serverloop.
fixes the utmp handling; report from Lutz.Jaenicke@aet.TU-Cottbus.DE
|
|
[channels.h]
bad //-style comment; thx to stevev@darkwing.uoregon.edu
|
|
[channels.c channels.h session.c]
switch uid when cleaning up tmp files and sockets; reported by
zen-parse@gmx.net on bugtraq
|
|
[channels.c channels.h session.c]
use fatal_register_cleanup instead of atexit, sync with x11 authdir
handling
|
|
out of ssh Attic)
|
|
[channels.c channels.h nchan.c]
undo broken channel fix and try a different one. there
should be still some select errors...
|
