| Age | Commit message (Collapse) | Author |
|---|
|
[clientloop.c]
Clear exit code when ssh -N is terminated with a SIGTERM. ok markus@
|
|
[channels.c channels.h clientloop.c]
move client only agent code to clientloop.c
|
|
[Makefile.in auth1.c auth2.c auth.c auth.h auth-krb5.c canohost.c
cleanup.c clientloop.c fatal.c gss-serv.c log.c log.h monitor.c monitor.h
monitor_wrap.c monitor_wrap.h packet.c serverloop.c session.c session.h
ssh-agent.c sshd.c]
replace fatal_cleanup() and linked list of fatal callbacks with static
cleanup_exit() function. re-refine cleanup_exit() where appropriate,
allocate sshd's authctxt eary to allow simpler cleanup in sshd.
tested by many, ok deraadt@
|
|
[clientloop.c sshtty.c sshtty.h]
remove fatal callbacks from client code; ok deraadt
|
|
[atomicio.c atomicio.h authfd.c clientloop.c monitor_wrap.c msg.c
progressmeter.c scp.c sftp-client.c ssh-keyscan.c ssh.h sshconnect.c
sshd.c]
deal with typing of write vs read in atomicio
|
|
[clientloop.c session.c ssh.1]
allow to send a BREAK to the remote system; ok various
|
|
[channels.c clientloop.c serverloop.c session.c ssh.c]
make channel_new() strdup the 'remote_name' (not the caller); ok theo
|
|
|
|
|
|
- markus@cvs.openbsd.org 2003/04/02 09:48:07
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
reapply rekeying chage, tested by henning@, ok djm@
|
|
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
rekeying bugfixes and automatic rekeying:
* both client and server rekey _automatically_
(a) after 2^31 packets, because after 2^32 packets
the sequence number for packets wraps
(b) after 2^(blocksize_in_bits/4) blocks
(see: draft-ietf-secsh-newmodes-00.txt)
(a) and (b) are _enabled_ by default, and only disabled for known
openssh versions, that don't support rekeying properly.
* client option 'RekeyLimit'
* do not reply to requests during rekeying
- markus@cvs.openbsd.org 2003/04/01 10:22:21
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
backout rekeying changes (for 3.6.1)
|
|
[clientloop.c]
don't overwrite SIG{INT,QUIT,TERM} handler if set to SIG_IGN;
e.g. if ssh is used for backup; report Joerg Schilling; ok millert@
|
|
[clientloop.c]
format with current EscapeChar; bugzilla #388 from wknox@mitre.org.
ok markus@
|
|
[auth-bsdauth.c auth-skey.c auth2-chall.c clientloop.c key.c
monitor_wrap.c monitor_wrap.h scard.h session.h sftp-glob.c ssh.c
sshconnect2.c sshd.c]
minor KNF
|
|
[channels.c channels.h clientloop.c serverloop.c]
move channel counter to u_int
|
|
sftp-client.c, ssh-agenet.c, ssh-keygen.c and connect.h (we did unexpand
independant of them)
|
|
|
|
[channels.c clientloop.c clientloop.h ssh.c]
request reply (success/failure) for -R style fwd in protocol v2,
depends on ordered replies.
fixes http://bugzilla.mindrot.org/show_bug.cgi?id=215; ok provos@
|
|
[clientloop.c]
remove unused, sync w/ cmdline patch in my tree.
|
|
[clientloop.c]
remove unused
|
|
[clientloop.c ssh.1]
add built-in command line for adding new port forwardings on the fly.
based on a patch from brian wellington. ok markus@.
|
|
[channels.c clientloop.c serverloop.c ssh.c]
channel_new never returns NULL, mouring@; ok djm@
|
|
[clientloop.c]
handle SSH2_MSG_GLOBAL_REQUEST (just reply with failure); ok djm@
|
|
[auth2.c auth2-chall.c channels.c channels.h clientloop.c dispatch.c dispatch.h kex.c kex.h serverloop.c ssh.c sshconnect2.c]
remove plen from the dispatch fn. it's no longer used.
|
|
[auth1.c auth-rsa.c channels.c clientloop.c packet.c packet.h serverloop.c session.c ssh.c sshconnect1.c sshd.c ttymodes.c]
get rid of packet_integrity_check, use packet_done() instead.
|
|
[auth1.c auth-rsa.c channels.c clientloop.c packet.c packet.h serverloop.c session.c ssh.c sshconnect1.c sshd.c ttymodes.c]
get rid of packet_integrity_check, use packet_done() instead.
|
|
[auth2.c auth2-chall.c channels.c channels.h clientloop.c dispatch.c]
[dispatch.h kex.c kex.h packet.c packet.h serverloop.c ssh.c]
[sshconnect2.c]
Conformance fix: we should send failing packet sequence number when
responding with a SSH_MSG_UNIMPLEMENTED message. Spotted by
yakk@yakk.dot.net; ok markus@
|
|
[auth1.c auth2.c auth2-chall.c auth-bsdauth.c auth.c authfile.c auth.h]
[auth-krb4.c auth-rhosts.c auth-skey.c bufaux.c canohost.c channels.c]
[cipher.c clientloop.c compat.c compress.c deattack.c key.c log.c mac.c]
[match.c misc.c nchan.c packet.c readconf.c rijndael.c rijndael.h scard.c]
[servconf.c servconf.h serverloop.c session.c sftp.c sftp-client.c]
[sftp-glob.c sftp-int.c sftp-server.c ssh-add.c ssh-agent.c ssh.c]
[sshconnect1.c sshconnect2.c sshconnect.c sshd.8 sshd.c sshd_config]
[ssh-keygen.c sshlogin.c sshpty.c sshtty.c ttymodes.c uidswap.c]
basic KNF done while i was looking for something else
|
|
[clientloop.c serverloop.c sshd.c]
deal with LP64 printf issue with sig_atomic_t. from thorpej
|
|
[clientloop.c serverloop.c sshd.c]
volatile sig_atomic_t
|
|
[clientloop.c serverloop.c]
don't memset too much memory, ok millert@
original patch from jlk@kamens.brookline.ma.us via nalin@redhat.com
|
|
[clientloop.c]
make ~& (backgrounding) work again for proto v1; add support ~& for v2, too
|
|
[clientloop.c ssh.c]
ignore SIGPIPE early, makes ssh work if agent dies, netbsd-pr via itojun@
|
|
[clientloop.c]
clear select masks if we return before calling select().
|
|
- markus@cvs.openbsd.org 2001/10/10 22:18:47
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c session.h]
try to keep channels open until an exit-status message is sent.
don't kill the login shells if the shells stdin/out/err is closed.
this should now work:
ssh -2n localhost 'exec > /dev/null 2>&1; sleep 10; exit 5'; echo ?
|
|
[channels.c channels.h clientloop.c]
try to fix agent-forwarding-backconnection-bug, as seen on HPUX,
for example; with Lutz.Jaenicke@aet.TU-Cottbus.DE,
|
|
[channels.c channels.h clientloop.c nchan.c serverloop.c]
keep track of both maxfd and the size of the malloc'ed fdsets.
update maxfd if maxfd gets closed.
|
|
[channels.c channels.h clientloop.c]
adress -> address; ok markus@
|
|
[clientloop.c]
sync function definition with declaration; ok markus@
|
|
[channels.c channels.h cipher.c clientloop.c compat.c compat.h
hostfile.c kex.c kex.h key.c key.h nchan.c packet.c serverloop.c
session.c session.h sftp-server.c ssh-add.c ssh-agent.c uuencode.h]
update copyright for 2001
|
|
[auth1.c auth2.c auth2-chall.c authfd.c authfile.c auth-rhosts.c
canohost.c channels.c cipher.c clientloop.c deattack.c dh.c
hostfile.c kex.c kexdh.c kexgex.c key.c nchan.c packet.c radix.c
readpass.c scp.c servconf.c serverloop.c session.c sftp.c
sftp-client.c sftp-glob.c sftp-int.c sftp-server.c ssh-add.c
ssh-agent.c ssh.c sshconnect1.c sshconnect2.c sshconnect.c sshd.c
ssh-keygen.c ssh-keyscan.c]
more strict prototypes. raise warning level in Makefile.inc.
markus ok'ed
TODO; cleanup headers
|
|
[channels.c channels.h clientloop.c packet.c serverloop.c]
move from channel_stop_listening to channel_free_all,
call channel_free_all before calling waitpid() in serverloop.
fixes the utmp handling; report from Lutz.Jaenicke@aet.TU-Cottbus.DE
|
|
[clientloop.c serverloop.c sshd.c]
set flags in the signal handlers, do real work in the main loop,
ok provos@
|
|
pain will be over.]
- markus@cvs.openbsd.org 2001/05/31 10:30:17
[auth-options.c auth2.c channels.c channels.h clientloop.c nchan.c
packet.c serverloop.c session.c ssh.c]
undo the .c file split, just merge the header and keep the cvs
history
|
|
- markus@cvs.openbsd.org 2001/05/30 12:55:13
[auth-options.c auth2.c channels.c channels.h clientloop.c nchan.c
packet.c serverloop.c session.c ssh.c ssh1.h]
channel layer cleanup: merge header files and split .c files
|
|
[clientloop.c readconf.c ssh.c ssh.h]
don't perform escape processing when ``EscapeChar none''; ok markus@
|
|
[clientloop.c]
check for open sessions before we call select(); fixes the x11 client
bug reported by bowman@math.ualberta.ca
|
|
[clientloop.c misc.c misc.h]
add unset_nonblock for stdout/err flushing in client_loop().
|
|
- markus@cvs.openbsd.org 2001/05/08 19:17:31
[channels.c serverloop.c clientloop.c]
adds correct error reporting to async connect()s
fixes the server-discards-data-before-connected-bug found by
onoe@sm.sony.co.jp
|
|
[clientloop.c]
use atomicio for flushing stdout/stderr bufs. thanks to
jbw@izanami.cee.hw.ac.uk
|
