| Age | Commit message (Collapse) | Author |
|---|
|
[channels.c channels.h clientloop.c serverloop.c]
Try additional addresses when connecting to a port forward destination
whose DNS name resolves to more than one address. The previous behaviour
was to try the first address and give up.
Reported by stig AT venaas.com in bz#343
great feedback and ok markus@
|
|
[clientloop.c clientloop.h ssh.c]
Use new channel status confirmation callback system to properly deal
with "important" channel requests that fail, in particular command exec,
shell and subsystem requests. Previously we would optimistically assume
that the requests would always succeed, which could cause hangs if they
did not (e.g. when the server runs out of fds) or were unimplemented by
the server (bz #1384)
Also, properly report failing multiplex channel requests via the mux
client stderr (subject to LogLevel in the mux master) - better than
silently failing.
most bits ok markus@ (as part of a larger diff)
|
|
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c]
[monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c]
[ssh.c sshd.c]
Implement a channel success/failure status confirmation callback
mechanism. Each channel maintains a queue of callbacks, which will
be drained in order (RFC4253 guarantees confirm messages are not
reordered within an channel).
Also includes a abandonment callback to clean up if a channel is
closed without sending confirmation messages. This probably
shouldn't happen in compliant implementations, but it could be
abused to leak memory.
ok markus@ (as part of a larger diff)
|
|
[clientloop.c packet.c packet.h serverloop.c]
Allow all SSH2 packet types, including UNIMPLEMENTED to reset the
keepalive timer (bz #1307). ok markus@
|
|
[clientloop.c packet.c serverloop.c]
Revert the change for bz #1307 as it causes connection aborts if an IGNORE
packet arrives while we're waiting in packet_read_expect (and possibly
elsewhere).
|
|
[clientloop.c]
fd leak on session multiplexing error path. Report and patch from
gregory_shively AT fanniemae.com
|
|
[clientloop.c]
Use the correct packet maximum sizes for remote port and agent forwarding.
Prevents the server from killing the connection if too much data is queued
and an excessively large packet gets sent. bz #1360, ok djm@.
|
|
[clientloop.c serverloop.c packet.c]
Make SSH2_MSG_UNIMPLEMENTED and SSH2_MSG_IGNORE messages reset the
ServerAlive and ClientAlive timers. Prevents dropping a connection
when these are enabled but the peer does not support our keepalives.
bz #1307, ok djm@.
|
|
[clientloop.c]
fix memory leak in process_cmdline(), patch from Jan.Pechanec AT Sun.COM;
ok dtucker@
|
|
[clientloop.c monitor.c monitor_fdpass.c monitor_fdpass.h]
[monitor_wrap.c ssh.c]
make file descriptor passing code return an error rather than call fatal()
when it encounters problems, and use this to make session multiplexing
masters survive slaves failing to pass all stdio FDs; ok markus@
|
|
[clientloop.c]
do NOT fall back to the trused x11 cookie if generation of an untrusted
cookie fails; from security-alert at sun.com; ok dtucker
|
|
[clientloop.c clientloop.h ssh.c]
bz#1232: ensure that any specified LocalCommand is executed after the
tunnel device is opened. Also, make failures to open a tunnel device
fatal when ExitOnForwardFailure is active.
Reported by h.goebel AT goebel-consult.de; ok dtucker markus reyk deraadt
|
|
[readconf.c clientloop.c]
remove some bogus *p tests from charles longeau
ok deraadt millert
|
|
[clientloop.c]
set maximum packet and window sizes the same for multiplexed clients
as normal connections; ok markus@
|
|
[auth-skey.c kex.c ssh-keygen.c session.c clientloop.c]
spaces
|
|
[clientloop.c serverloop.c]
exit instead of doing a blocking tcp send if we detect a client/server
timeout, since the tcp sendqueue might be already full (of alive
requests); ok dtucker, report mpf
|
|
[auth-rsa.c auth-shadow.c auth-sia.c auth1.c auth2-chall.c]
[auth2-gss.c auth2-kbdint.c auth2-none.c authfd.c authfile.c]
[cipher-3des1.c cipher-aes.c cipher-bf1.c cipher-ctr.c clientloop.c]
[dh.c dns.c entropy.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c loginrec.c mac.c]
[md5crypt.c monitor.c monitor_wrap.c readconf.c rsa.c]
[scard-opensc.c scard.c session.c ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.c ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c]
[sshconnect1.c sshconnect2.c sshd.c rc4.diff]
[openbsd-compat/bsd-cray.c openbsd-compat/port-aix.c]
[openbsd-compat/port-linux.c openbsd-compat/port-solaris.c]
[openbsd-compat/port-uw.c]
Lots of headers for SCO OSR6, mainly adding stdarg.h for log.h;
compile problems reported by rac AT tenzing.org
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c]
[auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c]
[channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c]
[kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c]
[monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c]
[servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c]
[sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c]
[uuencode.h xmalloc.c]
move #include <stdio.h> out of includes.h
|
|
[authfd.c authfile.c dh.c canohost.c channels.c clientloop.c compat.c]
[hostfile.c kex.c log.c misc.c moduli.c monitor.c packet.c readpass.c]
[scp.c servconf.c session.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c sshconnect.c]
[sshconnect1.c sshd.c xmalloc.c]
move #include <stdlib.h> out of includes.h
|
|
[atomicio.c auth.c dh.c authfile.c buffer.c clientloop.c kex.c]
[groupaccess.c gss-genr.c kexgexs.c misc.c monitor.c monitor_mm.c]
[packet.c scp.c serverloop.c session.c sftp-client.c sftp-common.c]
[sftp-server.c sftp.c ssh-add.c ssh-agent.c ssh-keygen.c sshlogin.c]
[uidswap.c xmalloc.c]
move #include <sys/param.h> out of includes.h
|
|
[channels.c clientloop.c packet.c scp.c serverloop.c sftp-client.c]
[sftp-server.c ssh-agent.c ssh-keyscan.c sshconnect.c sshd.c]
move #include <sys/time.h> out of includes.h
|
|
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c]
[auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c]
[authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c]
[cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c]
[compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c]
[includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c]
[progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c]
move #include <string.h> out of includes.h
|
|
[authfd.c authfile.c channels.c cleanup.c clientloop.c groupaccess.c]
[includes.h log.c misc.c msg.c packet.c progressmeter.c readconf.c]
[readpass.c scp.c servconf.c sftp-client.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c]
[sshconnect.c sshlogin.c sshpty.c uidswap.c]
move #include <unistd.h> out of includes.h
|
|
[scp.c auth.c monitor.c serverloop.c sftp-server.c sshpty.c readpass.c
sshd.c monitor_wrap.c monitor_fdpass.c ssh-agent.c ttymodes.c atomicio.c
includes.h session.c sshlogin.c monitor_mm.c packet.c sshconnect2.c
sftp-client.c nchan.c clientloop.c sftp.c misc.c canohost.c channels.c
ssh-keygen.c progressmeter.c uidswap.c msg.c readconf.c sshconnect.c]
move #include <errno.h> out of includes.h; ok markus@
|
|
[clientloop.c ssh.1 ssh.c channels.c ssh_config.5 readconf.h session.c
channels.h readconf.c]
add ExitOnForwardFailure: terminate the connection if ssh(1)
cannot set up all requested dynamic, local, and remote port
forwardings. ok djm, dtucker, stevesk, jmc
|
|
[authfd.c canohost.c clientloop.c dns.c dns.h includes.h]
[monitor_fdpass.c nchan.c packet.c servconf.c sftp.c ssh-agent.c]
[ssh-keyscan.c ssh.c sshconnect.h sshd.c sshlogin.h]
move #include <sys/socket.h> out of includes.h
|
|
[clientloop.c ssh.1]
use -KR[bind_address:]port here; ok djm@
|
|
[clientloop.c]
mention optional bind_address in runtime port forwarding setup
command-line help. patch from santhi.amirta AT gmail.com
|
|
[clientloop.c]
missing free; from Kylene Hall
|
|
[auth.h clientloop.c dispatch.c dispatch.h kex.h]
replace the last non-sig_atomic_t flag used in a signal handler with a
sig_atomic_t, unfortunately with some knock-on effects in other (non-
signal) contexts in which it is used; ok markus@
|
|
[clientloop.c serverloop.c]
spacing
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c]
[auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c]
[auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c]
[buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c]
[cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c]
[deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c]
[kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c]
[readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c]
[sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c]
Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that
Theo nuked - our scripts to sync -portable need them in the files
|
|
[auth-bsdauth.c auth-skey.c auth.c auth2-chall.c channels.c]
[clientloop.c deattack.c gss-genr.c kex.c key.c misc.c moduli.c]
[monitor.c monitor_wrap.c packet.c scard.c sftp-server.c ssh-agent.c]
[ssh-keyscan.c ssh.c sshconnect.c sshconnect2.c sshd.c uuencode.c]
[xmalloc.c xmalloc.h]
introduce xcalloc() and xasprintf() failure-checked allocations
functions and use them throughout openssh
xcalloc is particularly important because malloc(nmemb * size) is a
dangerous idiom (subject to integer overflow) and it is time for it
to die
feedback and ok deraadt@
|
|
[channels.c clientloop.c monitor_wrap.c monitor_wrap.h serverloop.c]
[ssh.c sshpty.c sshpty.h]
sprinkle u_int throughout pty subsystem, ok markus
|
|
[clientloop.c progressmeter.c serverloop.c sshd.c]
ARGSUSED for signal handlers
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c]
[auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c]
[auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c]
[auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c]
[canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c]
[groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c]
[kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c]
[loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c]
[nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c]
[scard.c scp.c servconf.c serverloop.c session.c sftp-client.c]
[sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c]
[ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c]
[ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c]
[openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c]
[openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c]
[openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c]
[openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c]
RCSID() can die
|
|
[sftp-client.c ssh-keysign.c ssh.c sshconnect.c sshconnect2.c]
[sshd.c openbsd-compat/bsd-misc.c openbsd-compat/bsd-openpty.c]
[openbsd-compat/glob.c openbsd-compat/mktemp.c]
[openbsd-compat/readpassphrase.c] Lots of include fixes for
OpenSolaris
|
|
[canohost.c clientloop.c includes.h match.c readconf.c scp.c ssh.c]
[sshconnect.c]
move #include <ctype.h> out of includes.h; ok djm@
|
|
- stevesk@cvs.openbsd.org 2006/02/20 17:02:44
[clientloop.c includes.h monitor.c progressmeter.c scp.c]
[serverloop.c session.c sftp.c ssh-agent.c ssh.c sshd.c]
move #include <signal.h> out of includes.h; ok markus@
the previous was:
- stevesk@cvs.openbsd.org 2006/02/20 17:19:54
[auth-rhosts.c auth-rsa.c auth.c auth2-none.c auth2-pubkey.c]
[authfile.c clientloop.c includes.h readconf.c scp.c session.c]
[sftp-client.c sftp-common.c sftp-common.h sftp-glob.c]
[sftp-server.c sftp.c ssh-add.c ssh-keygen.c ssh.c sshconnect.c]
[sshconnect2.c sshd.c sshpty.c]
move #include <sys/stat.h> out of includes.h; ok markus@
|
|
[clientloop.c includes.h monitor.c progressmeter.c scp.c]
[serverloop.c session.c sftp.c ssh-agent.c ssh.c sshd.c]
move #include <signal.h> out of includes.h; ok markus@
|
|
[channels.c clientloop.c includes.h misc.c progressmeter.c sftp.c]
[ssh.c sshd.c sshpty.c]
move #include <sys/ioctl.h> out of includes.h; ok markus@
|
|
[auth.c clientloop.c includes.h misc.c monitor.c readpass.c]
[session.c sftp.c ssh-agent.c ssh-keysign.c ssh.c sshconnect.c]
[sshd.c sshpty.c]
move #include <paths.h> out of includes.h; ok markus@
|
|
[channels.c clientloop.c clientloop.h includes.h packet.h]
[serverloop.c sshpty.c sshpty.h sshtty.c ttymodes.c]
move #include <termios.h> out of includes.h; ok markus@
|
|
[channels.c channels.h clientloop.c]
add channel output filter interface.
ok djm@, suggested by markus@
|
|
- stevesk@cvs.openbsd.org 2005/12/28 22:46:06
[canohost.c channels.c clientloop.c]
use 'break-in' for consistency; ok deraadt@ ok and input jmc@
|
|
[clientloop.c]
reyk forgot to compile with -Werror (missing header)
|
|
[auth-options.c auth-options.h channels.c channels.h clientloop.c]
[misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h]
[serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c]
[sshconnect.h sshd.8 sshd_config sshd_config.5]
Add support for tun(4) forwarding over OpenSSH, based on an idea and
initial channel code bits by markus@. This is a simple and easy way to
use OpenSSH for ad hoc virtual private network connections, e.g.
administrative tunnels or secure wireless access. It's based on a new
ssh channel and works similar to the existing TCP forwarding support,
except that it depends on the tun(4) network interface on both ends of
the connection for layer 2 or layer 3 tunneling. This diff also adds
support for LocalCommand in the ssh(1) client.
ok djm@, markus@, jmc@ (manpages), tested and discussed with others
|
|
[clientloop.c packet.c serverloop.c session.c ssh-agent.c ssh-keygen.c]
[ssh.c sshconnect.c sshconnect1.c sshd.c]
no need to escape single quotes in comments, no binary change
|
|
[channels.c clientloop.c]
free()->xfree(); ok djm@
|
