| Age | Commit message (Collapse) | Author |
|---|
|
- Allow using a cross-architecture pkg-config.
- Pass default LDFLAGS to contrib/Makefile.
- Allow dh_strip to strip gnome-ssh-askpass, rather than calling
'install -s'.
|
|
nowadays (closes: #664383).
|
|
|
|
- Introduce sandboxing of the pre-auth privsep child using an optional
sshd_config(5) "UsePrivilegeSeparation=sandbox" mode that enables
mandatory restrictions on the syscalls the privsep child can perform.
- Add new SHA256-based HMAC transport integrity modes from
http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt.
- The pre-authentication sshd(8) privilege separation slave process now
logs via a socket shared with the master process, avoiding the need to
maintain /dev/log inside the chroot (closes: #75043, #429243,
#599240).
- ssh(1) now warns when a server refuses X11 forwarding (closes:
#504757).
- sshd_config(5)'s AuthorizedKeysFile now accepts multiple paths,
separated by whitespace (closes: #76312). The authorized_keys2
fallback is deprecated but documented (closes: #560156).
- ssh(1) and sshd(8): set IPv6 traffic class from IPQoS, as well as IPv4
ToS/DSCP (closes: #498297).
- ssh-add(1) now accepts keys piped from standard input. E.g. "ssh-add
- < /path/to/key" (closes: #229124).
- Clean up lost-passphrase text in ssh-keygen(1) (closes: #444691).
- Say "required" rather than "recommended" in unprotected-private-key
warning (LP: #663455).
|
|
authorized_keys lines for the same key; it's still not ideal, but at
least you'll only get one log entry per key (closes: #630606).
|
|
- Make hostbased auth with ECDSA keys work correctly (closes: #633368).
|
|
#614897).
|
|
- Fix stack information leak in legacy certificate signing
(http://www.openssh.com/txt/legacy-cert.adv).
|
|
(LP: #708571).
|
|
|
|
SELinux build fix.
|
|
|
|
- Implement Elliptic Curve Cryptography modes for key exchange (ECDH)
and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA
offer better performance than plain DH and DSA at the same equivalent
symmetric key length, as well as much shorter keys.
- sftp(1)/sftp-server(8): add a protocol extension to support a hard
link operation. It is available through the "ln" command in the
client. The old "ln" behaviour of creating a symlink is available
using its "-s" option or through the preexisting "symlink" command.
- scp(1): Add a new -3 option to scp: Copies between two remote hosts
are transferred through the local host (closes: #508613).
- ssh(1): "atomically" create the listening mux socket by binding it on
a temporary name and then linking it into position after listen() has
succeeded. This allows the mux clients to determine that the server
socket is either ready or stale without races (closes: #454784).
Stale server sockets are now automatically removed (closes: #523250).
- ssh(1): install a SIGCHLD handler to reap expired child process
(closes: #594687).
- ssh(1)/ssh-agent(1): honour $TMPDIR for client xauth and ssh-agent
temporary directories (closes: #357469, although only if you arrange
for ssh-agent to actually see $TMPDIR since the setgid bit will cause
it to be stripped off).
|
|
child processes, preventing lots of zombies when using ControlPersist
(closes: #594687).
|
|
|
|
|
|
|
|
- Added a ControlPersist option to ssh_config(5) that automatically
starts a background ssh(1) multiplex master when connecting. This
connection can stay alive indefinitely, or can be set to automatically
close after a user-specified duration of inactivity (closes: #335697,
#350898, #454787, #500573, #550262).
- Support AuthorizedKeysFile, AuthorizedPrincipalsFile,
HostbasedUsesNameFromPacketOnly, and PermitTunnel in sshd_config(5)
Match blocks (closes: #549858).
- sftp(1): fix ls in working directories that contain globbing
characters in their pathnames (LP: #530714).
|
|
memberships, and only allow group-writability by groups with exactly one
member, as zero-member groups are typically used by setgid binaries
rather than being user-private groups (closes: #581697).
|
|
group-writable, provided that the group in question contains only the
file's owner; this extends a patch previously applied to ~/.ssh/config
(closes: #581919).
|
|
- Unbreak sshd_config's AuthorizedKeysFile option for $HOME-relative
paths.
- Include a language tag when sending a protocol 2 disconnection
message.
- Make logging of certificates used for user authentication more clear
and consistent between CAs specified using TrustedUserCAKeys and
authorized_keys.
|
|
|
|
installed, the host key is published in an SSHFP RR secured with DNSSEC,
and VerifyHostKeyDNS=yes, then ssh will no longer prompt for host key
verification (closes: #572049).
|
|
|
|
introduced to match the behaviour of non-free SSH, in which -q does not
suppress fatal errors, but matching the behaviour of OpenSSH upstream is
much more important nowadays. We no longer document that -q does not
suppress fatal errors (closes: #280609). Migrate "LogLevel SILENT" to
"LogLevel QUIET" in sshd_config on upgrade.
|
|
the two patchlevel nybbles now, which is sufficient to address the
original reason this change was introduced, and it appears that any
change in the major/minor/fix nybbles would involve a new libssl package
name. (We'd still lose if the status nybble were ever changed, but that
would mean somebody had packaged a development/beta version rather than
a proper release, which doesn't appear to be normal practice.)
|
|
|
|
- After a transition period of about 10 years, this release disables SSH
protocol 1 by default. Clients and servers that need to use the
legacy protocol must explicitly enable it in ssh_config / sshd_config
or on the command-line.
- Remove the libsectok/OpenSC-based smartcard code and add support for
PKCS#11 tokens. This support is enabled by default in the Debian
packaging, since it now doesn't involve additional library
dependencies (closes: #231472, LP: #16918).
- Add support for certificate authentication of users and hosts using a
new, minimal OpenSSH certificate format (closes: #482806).
- Added a 'netcat mode' to ssh(1): "ssh -W host:port ...".
- Add the ability to revoke keys in sshd(8) and ssh(1). (For the Debian
package, this overlaps with the key blacklisting facility added in
openssh 1:4.7p1-9, but with different file formats and slightly
different scopes; for the moment, I've roughly merged the two.)
- Various multiplexing improvements, including support for requesting
port-forwardings via the multiplex protocol (closes: #360151).
- Allow setting an explicit umask on the sftp-server(8) commandline to
override whatever default the user has (closes: #496843).
- Many sftp client improvements, including tab-completion, more options,
and recursive transfer support for get/put (LP: #33378). The old
mget/mput commands never worked properly and have been removed
(closes: #270399, #428082).
- Do not prompt for a passphrase if we fail to open a keyfile, and log
the reason why the open failed to debug (closes: #431538).
- Prevent sftp from crashing when given a "-" without a command. Also,
allow whitespace to follow a "-" (closes: #531561).
|
|
3.8.1p1-1. Simon Wilkinson refused this patch since the old gssapi
mechanism was removed due to a serious security hole, and since these
versions of ssh-krb5 are no longer security-supported by Debian I don't
think there's any point keeping client compatibility for them.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
