| Age | Commit message (Collapse) | Author |
|---|
|
[openbsd-compat/sha2.h openbsd-compat/openbsd-compat.h]
[openbsd-compat/sha2.c] First stab at portability glue for SHA256
KEX support, should work with libc SHA256 support or OpenSSL
EVP_sha256 if present
|
|
[kex.c kex.h monitor.c myproposal.h ssh-keyscan.c sshconnect2.c sshd.c]
Implement the diffie-hellman-group-exchange-sha256 key exchange method
using the SHA256 code in libc (and wrapper to make it into an OpenSSL
EVP), interop tested against CVS PuTTY
NB. no portability bits committed yet
|
|
[kex.c kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c]
remove hardcoded hash lengths in key exchange code, allowing
implementation of KEX methods with different hashes (e.g. SHA-256);
ok markus@ dtucker@ stevesk@
|
|
[kex.c kex.h myproposal.h packet.c packet.h servconf.c session.c]
[sshconnect2.c sshd.c sshd_config sshd_config.5]
add a new compression method that delays compression until the user
has been authenticated successfully and set compression to 'delayed'
for sshd.
this breaks older openssh clients (< 3.5) if they insist on
compression, so you have to re-enable compression in sshd_config.
ok djm@
|
|
[auth-rh-rsa.c auth-rhosts.c auth2-chall.c auth2-gss.c channels.c]
[cipher-ctr.c gss-genr.c gss-serv.c kex.c moduli.c readconf.c]
[serverloop.c session.c sftp-client.c sftp.c ssh-add.c ssh-keygen.c]
[sshconnect.c sshconnect2.c]
knf says that a 2nd level indent is four (not three or five) spaces
|
|
[auth1.c channels.c cipher.c clientloop.c kex.c session.c ssh.c]
[sshconnect.c]
spacing
|
|
[auth-rsa.c auth.c auth1.c auth2-chall.c auth2-gss.c authfd.c authfile.c]
[bufaux.c canohost.c channels.c cipher.c clientloop.c dns.c gss-serv.c]
[kex.c kex.h key.c mac.c match.c misc.c packet.c packet.h scp.c]
[servconf.c session.c session.h sftp-client.c sftp-server.c sftp.c]
[ssh-keyscan.c ssh-rsa.c sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
make this -Wsign-compare clean; ok avsm@ markus@
NB. auth1.c changes not committed yet (conflicts with uncommitted sync)
NB2. more work may be needed to make portable Wsign-compare clean
|
|
[auth-rsa.c auth2-gss.c auth2-pubkey.c authfile.c canohost.c channels.c
cipher.c dns.c kex.c monitor.c monitor_fdpass.c monitor_wrap.c
monitor_wrap.h nchan.c packet.c progressmeter.c scp.c sftp-server.c sftp.c
ssh-gss.h ssh-keygen.c ssh.c sshconnect.c sshconnect1.c sshlogin.c
sshpty.c]
make ssh -Wshadow clean, no functional changes
markus@ ok
There are also some portable-specific -Wshadow warnings to be fixed in
monitor.c and montior_wrap.c.
|
|
[dh.c dh.h kex.c kex.h kexdhc.c kexdhs.c monitor.c myproposal.h]
[ssh-keyscan.c sshconnect2.c sshd.c]
implement diffie-hellman-group14-sha1 kex method (trivial extension to
existing diffie-hellman-group1-sha1); ok markus@
|
|
[kex.c]
don't overwrite what we are trying to compute
|
|
[OVERVIEW auth-rsa.c auth1.c kex.c monitor.c session.c sshconnect1.c
sshd.c] removed: mpaux.c mpaux.h
kill some more tiny files; ok deraadt@
|
|
[everything]
unexpand and delete whitespace at EOL; ok markus@
(done locally and RCS IDs synced)
|
|
[compat.c compat.h kex.c]
bugfix causes stalled connections for ssh.com < 3.0; noticed by ho@;
tested by ho@ and myself
|
|
[kex.c kexdh.c kexgex.c kex.h sshconnect2.c sshd.c ssh-keyscan.c]
split kex into client and server code, no need to link
server code into the client; ok provos@
|
|
[kex.c]
add support for key exchange guesses; based on work by
avraham.fraenkel@commatch.com; fixes bug #148; ok deraadt@
|
|
[cipher.c kex.c packet.c sshconnect.c sshconnect2.c]
debug->debug2, unify debug messages
|
|
[authfile.c kex.c ssh-agent.c]
cat to (void) when output from buffer_get_X is ignored
|
|
[kex.c monitor.c monitor_wrap.c sshd.c]
'monitor' variable clashes with at least one lame platform (NeXT). i
Renamed to 'pmonitor'. provos@
- (bal) Fixed up PAM case. I think.
|
|
[kex.c]
generate a new cookie for each SSH2_MSG_KEXINIT message we send out
|
|
[auth-bsdauth.c auth-options.c auth-rh-rsa.c auth-rsa.c auth-skey.c auth.h
auth1.c auth2-chall.c auth2.c kex.c kex.h kexdh.c kexgex.c servconf.c
session.h servconf.h serverloop.c session.c sshd.c]
integrate privilege separated openssh; its turned off by default for now.
work done by me and markus@
applied, but outside of ensure that smaller code bits migrated with
their owners.. no work was tried to 'fix' it to work. =) Later project!
|
|
revert
|
|
PAM, Cygwin and OSF SIA will not work for sure
|
|
[authfile.c kex.c kexdh.c kexgex.c key.c ssh-dss.c]
add some const EVP_MD for openssl-0.9.7
|
|
[kex.c kexdh.c kexgex.c]
don't allow garbage after payload.
|
|
[authfile.c cipher.c cipher.h kex.c kex.h packet.c]
hide some more implementation details of cipher.[ch] and prepares for move
to EVP, ok deraadt@
|
|
[kex.c]
restore kexinit handler if we reset the dispatcher, this unbreaks rekeying
s/kex_clear_dispatch/kex_reset_dispatch/
|
|
[kex.c kexdh.c kexgex.c key.c mac.c]
use EVP_MD_size(evp_md) and not evp_md->md_size; ok steveks@
|
|
[auth2.c dispatch.c dispatch.h kex.c]
a single dispatch_protocol_error() that sends a message of type 'UNIMPLEMENTED'
dispatch_range(): set handler for a ranges message types
use dispatch_protocol_ignore() for authentication requests after
successful authentication (the drafts requirement).
serverloop/clientloop now send a 'UNIMPLEMENTED' message instead of exiting.
|
|
[auth2.c auth2-chall.c channels.c channels.h clientloop.c dispatch.c dispatch.h kex.c kex.h serverloop.c ssh.c sshconnect2.c]
remove plen from the dispatch fn. it's no longer used.
|
|
[auth1.c auth-rsa.c channels.c dispatch.c kex.c kexdh.c kexgex.c packet.c packet.h serverloop.c session.c ssh.c sshconnect1.c sshconnect2.c sshd.c]
packet_read* no longer return the packet length, since it's not used.
|
|
[auth1.c auth-rsa.c channels.c clientloop.c packet.c packet.h serverloop.c session.c ssh.c sshconnect1.c sshd.c ttymodes.c]
get rid of packet_integrity_check, use packet_done() instead.
|
|
[auth2.c auth2-chall.c channels.c channels.h clientloop.c dispatch.c]
[dispatch.h kex.c kex.h packet.c packet.h serverloop.c ssh.c]
[sshconnect2.c]
Conformance fix: we should send failing packet sequence number when
responding with a SSH_MSG_UNIMPLEMENTED message. Spotted by
yakk@yakk.dot.net; ok markus@
|
|
[authfd.c authfile.c bufaux.c channels.c compat.c kex.c kexgex.c
key.c misc.c packet.c servconf.c ssh-agent.c sshconnect2.c
sshconnect.c sshd.c ssh-dss.c ssh-keygen.c ssh-rsa.c]
minor KNF
|
|
[channels.c channels.h cipher.c clientloop.c compat.c compat.h
hostfile.c kex.c kex.h key.c key.h nchan.c packet.c serverloop.c
session.c session.h sftp-server.c ssh-add.c ssh-agent.c uuencode.h]
update copyright for 2001
|
|
[auth1.c auth2.c auth2-chall.c authfd.c authfile.c auth-rhosts.c
canohost.c channels.c cipher.c clientloop.c deattack.c dh.c
hostfile.c kex.c kexdh.c kexgex.c key.c nchan.c packet.c radix.c
readpass.c scp.c servconf.c serverloop.c session.c sftp.c
sftp-client.c sftp-glob.c sftp-int.c sftp-server.c ssh-add.c
ssh-agent.c ssh.c sshconnect1.c sshconnect2.c sshconnect.c sshd.c
ssh-keygen.c ssh-keyscan.c]
more strict prototypes. raise warning level in Makefile.inc.
markus ok'ed
TODO; cleanup headers
|
|
[compat.c compat.h kex.c]
allow interop with weaker key generation used by ssh-2.0.x, x < 10
|
|
[auth-chall.c authfd.c channels.c clientloop.c kex.c kexgex.c key.c
mac.c packet.c serverloop.c sftp-client.c sftp-client.h sftp-glob.c
sftp-glob.h sftp-int.c sftp-server.c sftp.c ssh-keygen.c sshconnect.c
sshconnect2.c sshd.c]
fix whitespace: unexpand + trailing spaces.
|
|
[dh.c kex.c packet.c]
clear+free keys,iv for rekeying.
+ fix DH mem leaks. ok niels@
|
|
[kex.c kexgex.c serverloop.c]
parse full kexinit packet.
make server-side more robust, too.
|
|
[channels.c channels.h clientloop.c kex.c kex.h serverloop.c
sshconnect2.c sshd.c]
more robust rekeying
don't send channel data after rekeying is started.
|
|
[clientloop.c kex.c kex.h serverloop.c sshconnect2.c sshd.c]
enable server side rekeying + some rekey related clientup.
todo: we should not send any non-KEX messages after we send KEXINIT
|
|
[kex.c kex.h kexdh.c kexgex.c packet.c sshconnect2.c sshd.c]
don't sent multiple kexinit-requests.
send newkeys, block while waiting for newkeys.
fix comments.
|
|
[kex.c kex.h packet.c sshconnect2.c sshd.c]
undo parts of recent my changes: main part of keyexchange does not
need dispatch-callbacks, since application data is delayed until
the keyexchange completes (if i understand the drafts correctly).
add some infrastructure for re-keying.
|
|
[dh.c dh.h kex.c kex.h sshconnect2.c sshd.c]
move kex to kex*.c, used dispatch_set() callbacks for kex. should
make rekeying easier.
|
|
- markus@cvs.openbsd.org 2001/03/29 21:17:40
[dh.c dh.h kex.c kex.h]
prepare for rekeying: move DH code to dh.c
|
|
- provos@cvs.openbsd.org 2001/03/28 21:59:41
[kex.c kex.h sshconnect2.c sshd.c]
forgot to include min and max params in hash, okay markus@
|
|
[kex.c match.c match.h readconf.c readconf.h sshconnect2.c]
add PreferredAuthentications
|
|
[kex.c kex.h sshconnect2.c sshd.c]
generate a 2*need size (~300 instead of 1024/2048) random private
exponent during the DH key agreement. according to Niels (the great
german advisor) this is safe since /etc/primes contains strong
primes only.
References:
P. C. van Oorschot and M. J. Wiener, On Diffie-Hellman key
agreement with short exponents, In Advances in Cryptology
- EUROCRYPT'96, LNCS 1070, Springer-Verlag, 1996, pp.332-343.
|
|
[Makefile.in sshd.8 sshconnect2.c readconf.h readconf.c packet.c
sshd.c ssh.c ssh.1 servconf.h servconf.c myproposal.h kex.h kex.c]
1) clean up the MAC support for SSH-2
2) allow you to specify the MAC with 'ssh -m'
3) or the 'MACs' keyword in ssh(d)_config
4) add hmac-{md5,sha1}-96
ok stevesk@, provos@
|
|
sync with netbsd tree changes.
- more strict prototypes, include necessary headers
- use paths.h/pathnames.h decls
- size_t typecase to int -> u_long
|
