| Age | Commit message (Collapse) | Author |
|---|
|
[authfile.c cipher.c cipher.h kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c]
[key.c key.h mac.c mac.h packet.c ssh.1 ssh.c]
add the ability to query supported ciphers, MACs, key type and KEX
algorithms to ssh. Includes some refactoring of KEX and key type handling
to be table-driven; ok markus@
|
|
[PROTOCOL authfile.c cipher.c cipher.h kex.c kex.h monitor_wrap.c]
[myproposal.h packet.c ssh_config.5 sshd_config.5]
support AES-GCM as defined in RFC 5647 (but with simpler KEX handling)
ok and feedback djm@
|
|
[PROTOCOL authfile.c cipher.c cipher.h kex.h mac.c myproposal.h]
[packet.c ssh_config.5 sshd_config.5]
add encrypt-then-mac (EtM) modes to openssh by defining new mac algorithms
that change the packet format and compute the MAC over the encrypted
message (including the packet size) instead of the plaintext data;
these EtM modes are considered more secure and used by default.
feedback and ok djm@
|
|
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h]
[servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5]
add a KexAlgorithms knob to the client and server configuration to allow
selection of which key exchange methods are used by ssh(1) and sshd(8)
and their order of preference.
ok markus@
|
|
for missing headers and compiler warnings.
|
|
[kexecdhc.c kexecdhs.c key.c key.h myproposal.h packet.c readconf.c]
[ssh-agent.c ssh-ecdsa.c ssh-keygen.c ssh.c] Disable ECDH and ECDSA on
platforms that don't have the requisite OpenSSL support. ok dtucker@
|
|
[kex.c kex.h kexecdh.c key.c key.h monitor.c ssh-ecdsa.c]
ECDH/ECDSA compliance fix: these methods vary the hash function they use
(SHA256/384/512) depending on the length of the curve in use. The previous
code incorrectly used SHA256 in all cases.
This fix will cause authentication failure when using 384 or 521-bit curve
keys if one peer hasn't been upgraded and the other has. (256-bit curve
keys work ok). In particular you may need to specify HostkeyAlgorithms
when connecting to a server that has not been upgraded from an upgraded
client.
ok naddy@
|
|
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
|
|
- djm@cvs.openbsd.org 2010/02/26 20:29:54
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c]
[auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c]
[hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c]
[myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c]
[sshconnect2.c sshd.8 sshd.c sshd_config.5]
Add support for certificate key types for users and hosts.
OpenSSH certificate key types are not X.509 certificates, but a much
simpler format that encodes a public key, identity information and
some validity constraints and signs it with a CA key. CA keys are
regular SSH keys. This certificate style avoids the attack surface
of X.509 certificates and is very easy to deploy.
Certified host keys allow automatic acceptance of new host keys
when a CA certificate is marked as sh/known_hosts.
see VERIFYING HOST KEYS in ssh(1) for details.
Certified user keys allow authentication of users when the signing
CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS
FILE FORMAT" in sshd(8) for details.
Certificates are minted using ssh-keygen(1), documentation is in
the "CERTIFICATES" section of that manpage.
Documentation on the format of certificates is in the file
PROTOCOL.certkeys
feedback and ok markus@
|
|
[sshconnect2.c kex.h kex.c]
Let the client detect if the server supports roaming by looking
for the resume@appgate.com kex algorithm.
ok markus@
|
|
[packet.h packet.c]
Add packet_put_int64() and packet_get_int64(), part of a larger change
from Martin Forssen.
|
|
[kex.h mac.c mac.h monitor_wrap.c myproposal.h packet.c ssh.1]
[ssh_config.5 sshd.8 sshd_config.5]
Add a new MAC algorithm for data integrity, UMAC-64 (not default yet,
must specify umac-64@openssh.com). Provides about 20% end-to-end speedup
compared to hmac-md5. Represents a different approach to message
authentication to that of HMAC that may be beneficial if HMAC based on
one of its underlying hash algorithms is found to be vulnerable to a
new attack. http://www.ietf.org/rfc/rfc4418.txt
in conjunction with and OK djm@
|
|
[kex.c monitor_wrap.c packet.c mac.h kex.h mac.c]
Preserve MAC ctx between packets, saving 2xhash calls per-packet.
Yields around a 12-16% end-to-end speedup for arcfour256/hmac-md5
patch from markus@ tested dtucker@ and myself, ok markus@ and me (I'm
committing at his request)
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[auth.h dispatch.c kex.h sftp-client.c]
#include <signal.h> for sig_atomic_t; need this prior to <sys/param.h>
move
|
|
sig_atomic_t
|
|
[auth.h clientloop.c dispatch.c dispatch.h kex.h]
replace the last non-sig_atomic_t flag used in a signal handler with a
sig_atomic_t, unfortunately with some knock-on effects in other (non-
signal) contexts in which it is used; ok markus@
|
|
[atomicio.h auth-options.h auth.h auth2-gss.c authfd.h authfile.h]
[bufaux.h buffer.h canohost.h channels.h cipher.h clientloop.h]
[compat.h compress.h crc32.c crc32.h deattack.h dh.h dispatch.h]
[dns.c dns.h getput.h groupaccess.h gss-genr.c gss-serv-krb5.c]
[gss-serv.c hostfile.h includes.h kex.h key.h log.h mac.h match.h]
[misc.h monitor.h monitor_fdpass.h monitor_mm.h monitor_wrap.h msg.h]
[myproposal.h packet.h pathnames.h progressmeter.h readconf.h rsa.h]
[scard.h servconf.h serverloop.h session.h sftp-common.h sftp.h]
[ssh-gss.h ssh.h ssh1.h ssh2.h sshconnect.h sshlogin.h sshpty.h]
[ttymodes.h uidswap.h uuencode.h xmalloc.h]
standardise spacing in $OpenBSD$ tags; requested by deraadt@
|
|
[kex.h myproposal.h]
spacing
|
|
[kex.c kex.h monitor.c myproposal.h ssh-keyscan.c sshconnect2.c sshd.c]
Implement the diffie-hellman-group-exchange-sha256 key exchange method
using the SHA256 code in libc (and wrapper to make it into an OpenSSL
EVP), interop tested against CVS PuTTY
NB. no portability bits committed yet
|
|
[kex.c kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c]
remove hardcoded hash lengths in key exchange code, allowing
implementation of KEX methods with different hashes (e.g. SHA-256);
ok markus@ dtucker@ stevesk@
|
|
[kex.c kex.h myproposal.h packet.c packet.h servconf.c session.c]
[sshconnect2.c sshd.c sshd_config sshd_config.5]
add a new compression method that delays compression until the user
has been authenticated successfully and set compression to 'delayed'
for sshd.
this breaks older openssh clients (< 3.5) if they insist on
compression, so you have to re-enable compression in sshd_config.
ok djm@
|
|
[auth-rsa.c auth.c auth1.c auth2-chall.c auth2-gss.c authfd.c authfile.c]
[bufaux.c canohost.c channels.c cipher.c clientloop.c dns.c gss-serv.c]
[kex.c kex.h key.c mac.c match.c misc.c packet.c packet.h scp.c]
[servconf.c session.c session.h sftp-client.c sftp-server.c sftp.c]
[ssh-keyscan.c ssh-rsa.c sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
make this -Wsign-compare clean; ok avsm@ markus@
NB. auth1.c changes not committed yet (conflicts with uncommitted sync)
NB2. more work may be needed to make portable Wsign-compare clean
|
|
[dh.c dh.h kex.c kex.h kexdhc.c kexdhs.c monitor.c myproposal.h]
[ssh-keyscan.c sshconnect2.c sshd.c]
implement diffie-hellman-group14-sha1 kex method (trivial extension to
existing diffie-hellman-group1-sha1); ok markus@
|
|
[kex.h moduli.c tildexpand.c]
add prototypes for -Wall; ok djm
|
|
[kex.c kexdh.c kexgex.c kex.h sshconnect2.c sshd.c ssh-keyscan.c]
split kex into client and server code, no need to link
server code into the client; ok provos@
|
|
[channels.c kex.h key.c monitor.c monitor_wrap.c radix.c uuencode.c]
signed vs unsigned from -pedantic; ok henning@
|
|
[cipher.c kex.h mac.c]
fix warnings (openssl 0.9.7 requires const)
|
|
[auth-bsdauth.c auth-options.c auth-rh-rsa.c auth-rsa.c auth-skey.c auth.h
auth1.c auth2-chall.c auth2.c kex.c kex.h kexdh.c kexgex.c servconf.c
session.h servconf.h serverloop.c session.c sshd.c]
integrate privilege separated openssh; its turned off by default for now.
work done by me and markus@
applied, but outside of ensure that smaller code bits migrated with
their owners.. no work was tried to 'fix' it to work. =) Later project!
|
|
revert
|
|
PAM, Cygwin and OSF SIA will not work for sure
|
|
[authfile.c cipher.c cipher.h kex.c kex.h packet.c]
hide some more implementation details of cipher.[ch] and prepares for move
to EVP, ok deraadt@
|
|
[auth2.c auth2-chall.c channels.c channels.h clientloop.c dispatch.c dispatch.h kex.c kex.h serverloop.c ssh.c sshconnect2.c]
remove plen from the dispatch fn. it's no longer used.
|
|
[auth2.c auth2-chall.c channels.c channels.h clientloop.c dispatch.c]
[dispatch.h kex.c kex.h packet.c packet.h serverloop.c ssh.c]
[sshconnect2.c]
Conformance fix: we should send failing packet sequence number when
responding with a SSH_MSG_UNIMPLEMENTED message. Spotted by
yakk@yakk.dot.net; ok markus@
|
|
[authfd.h authfile.h auth.h auth-options.h bufaux.h buffer.h
canohost.h channels.h cipher.h clientloop.h compat.h compress.h
crc32.h deattack.h dh.h dispatch.h groupaccess.c groupaccess.h
hostfile.h kex.h key.h log.c log.h mac.h misc.c misc.h mpaux.h
packet.h radix.h readconf.h readpass.h rsa.h servconf.h serverloop.h
session.h sftp-common.c sftp-common.h sftp-glob.h sftp-int.h
sshconnect.h ssh-dss.h sshlogin.h sshpty.h ssh-rsa.h sshtty.h
tildexpand.h uidswap.h uuencode.h xmalloc.h]
remove comments from .h, since they are cut&paste from the .c files
and out of sync
|
|
[atomicio.h authfd.h authfile.h auth.h auth-options.h bufaux.h
buffer.h canohost.h channels.h cipher.h clientloop.h compat.h
compress.h crc32.h deattack.h dh.h dispatch.h groupaccess.h
hostfile.h kex.h key.h log.h mac.h match.h misc.h mpaux.h packet.h
radix.h readconf.h readpass.h rsa.h]
prototype pedant. not very creative...
- () -> (void)
- no variable names
|
|
[channels.c channels.h cipher.c clientloop.c compat.c compat.h
hostfile.c kex.c kex.h key.c key.h nchan.c packet.c serverloop.c
session.c session.h sftp-server.c ssh-add.c ssh-agent.c uuencode.h]
update copyright for 2001
|
|
[kexdh.c kexgex.c kex.h pathnames.h readconf.c servconf.h ssh.1
sshconnect1.c sshconnect2.c sshconnect.c sshconnect.h sshd.8]
get rid of known_hosts2, use it for hostkey lookup, but do not
modify.
|
|
[channels.c channels.h clientloop.c kex.c kex.h serverloop.c
sshconnect2.c sshd.c]
more robust rekeying
don't send channel data after rekeying is started.
|
|
[clientloop.c kex.c kex.h serverloop.c sshconnect2.c sshd.c]
enable server side rekeying + some rekey related clientup.
todo: we should not send any non-KEX messages after we send KEXINIT
|
|
[kex.c kex.h kexdh.c kexgex.c packet.c sshconnect2.c sshd.c]
don't sent multiple kexinit-requests.
send newkeys, block while waiting for newkeys.
fix comments.
|
|
[kex.c kex.h packet.c sshconnect2.c sshd.c]
undo parts of recent my changes: main part of keyexchange does not
need dispatch-callbacks, since application data is delayed until
the keyexchange completes (if i understand the drafts correctly).
add some infrastructure for re-keying.
|
|
[dh.c dh.h kex.c kex.h sshconnect2.c sshd.c]
move kex to kex*.c, used dispatch_set() callbacks for kex. should
make rekeying easier.
|
|
- markus@cvs.openbsd.org 2001/03/29 21:17:40
[dh.c dh.h kex.c kex.h]
prepare for rekeying: move DH code to dh.c
|
|
- provos@cvs.openbsd.org 2001/03/28 21:59:41
[kex.c kex.h sshconnect2.c sshd.c]
forgot to include min and max params in hash, okay markus@
|
|
[kex.c kex.h sshconnect2.c sshd.c]
generate a 2*need size (~300 instead of 1024/2048) random private
exponent during the DH key agreement. according to Niels (the great
german advisor) this is safe since /etc/primes contains strong
primes only.
References:
P. C. van Oorschot and M. J. Wiener, On Diffie-Hellman key
agreement with short exponents, In Advances in Cryptology
- EUROCRYPT'96, LNCS 1070, Springer-Verlag, 1996, pp.332-343.
|
|
[Makefile.in sshd.8 sshconnect2.c readconf.h readconf.c packet.c
sshd.c ssh.c ssh.1 servconf.h servconf.c myproposal.h kex.h kex.c]
1) clean up the MAC support for SSH-2
2) allow you to specify the MAC with 'ssh -m'
3) or the 'MACs' keyword in ssh(d)_config
4) add hmac-{md5,sha1}-96
ok stevesk@, provos@
|
|
|
|
[many files; did this manually to our top-level source dir]
unexpand and remove end-of-line whitespace; ok markus@
|
|
[atomicio.h canohost.h clientloop.h deattack.h dh.h dispatch.h
groupaccess.c groupaccess.h hmac.h hostfile.h includes.h kex.h
key.h log.h login.h match.h misc.h myproposal.h nchan.ms pathnames.h
radix.h readpass.h rijndael.h serverloop.h session.h sftp.h ssh-add.1
ssh-dss.h ssh-keygen.1 ssh-keyscan.1 ssh-rsa.h ssh1.h ssh_config
sshconnect.h sshd_config tildexpand.h uidswap.h uuencode.h]
$OpenBSD$
|
