| Age | Commit message (Collapse) | Author |
|---|
|
with & ok markus@
OpenBSD-Commit-ID: 78619a50ea7e4ca2f3b54d4658b3227277490ba2
|
|
ssh->kex and factor out the banner exchange. This eliminates some common code
from the client and server.
Also be more strict about handling \r characters - these should only
be accepted immediately before \n (pointed out by Jann Horn).
Inspired by a patch from Markus Schmidt.
(lots of) feedback and ok markus@
OpenBSD-Commit-ID: 1cc7885487a6754f63641d7d3279b0941890275b
|
|
report from coolbugcheckers AT gmail.com
OpenBSD-Commit-ID: a90f146c5b5f5b1408700395e394f70b440856cb
|
|
Polyfill missing API with replacement functions extracted from LibreSSL
|
|
OpenSSH; feedback and ok tb@ jsing@ markus@
OpenBSD-Commit-ID: cacbcac87ce5da0d3ca7ef1b38a6f7fb349e4417
|
|
after checking with codespell tool
(https://github.com/lucasdemarchi/codespell)
OpenBSD-Commit-ID: 373222f12d7ab606598a2d36840c60be93568528
|
|
Remove all guards for calls to OpenSSL free functions -
all of these functions handle NULL, from at least OpenSSL 1.0.1g onwards.
Prompted by dtucker@ asking about guards for RSA_free(), when looking at
openssh-portable pr#84 on github.
ok deraadt@ dtucker@
OpenBSD-Commit-ID: 954f1c51b94297d0ae1f749271e184141e0cadae
|
|
protocol handlers all get struct ssh passed; ok djm@
Upstream-ID: 0ca9ea2a5d01a6d2ded94c5024456a930c5bfb5d
|
|
Add MAXIMUM(), MINIMUM(), and ROUNDUP() to misc.h, then
use those definitions rather than pulling <sys/param.h> and unknown namespace
pollution. ok djm markus dtucker
Upstream-ID: 712cafa816c9f012a61628b66b9fbd5687223fb8
|
|
Back out rev 1.28 "Check min and max sizes sent by the
client" change. It caused "key_verify failed for server_host_key" in clients
that send a DH-GEX min value less that DH_GRP_MIN, eg old OpenSSH and PuTTY.
ok djm@
Upstream-ID: 452979d3ca5c1e9dff063287ea0a5314dd091f65
|
|
Check min and max sizes sent by the client against what
we support before passing them to the monitor. ok djm@
Upstream-ID: 750627e8117084215412bff00a25b1586ab17ece
|
|
Ensure that the client's proposed DH-GEX max value is at
least as big as the minimum the server will accept. ok djm@
Upstream-ID: b4b84fa04aab2de7e79a6fee4a6e1c189c0fe775
|
|
implement SHA2-{256,512} for RSASSA-PKCS1-v1_5 signatures
(user and host auth) based on draft-rsa-dsa-sha2-256-03.txt and
draft-ssh-ext-info-04.txt; with & ok djm@
Upstream-ID: cf82ce532b2733e5c4b34bb7b7c94835632db309
|
|
deprecate ancient, pre-RFC4419 and undocumented
SSH2_MSG_KEX_DH_GEX_REQUEST_OLD message; ok markus@ deraadt@ "seems
reasonable" dtucker@
|
|
correctly match ECDSA subtype (== curve) for
offered/recevied host keys. Fixes connection-killing host key mismatches when
a server offers multiple ECDSA keys with different curve type (an extremely
unlikely configuration).
ok markus, "looks mechanical" deraadt@
|
|
Reduce use of <sys/param.h> and transition to <limits.h>
throughout. ok djm markus
|
|
fix hostkeys in agent; ok markus@
|
|
adapt kex to sshbuf and struct ssh; ok djm@
|
|
update packet.c & isolate, introduce struct ssh a) switch
packet.c to buffer api and isolate per-connection info into struct ssh b)
(de)serialization of the state is moved from monitor to packet.c c) the old
packet.c API is implemented in opacket.[ch] d) compress.c/h is removed and
integrated into packet.c with and ok djm@
|
|
Disables and removes dependency on OpenSSL. Many features don't
work and the set of crypto options is greatly restricted. This
will only work on system with native arc4random or /dev/urandom.
Considered highly experimental for now.
|
|
[auth1.c auth2-chall.c auth2-passwd.c authfile.c bufaux.c bufbn.c]
[buffer.c cipher-3des1.c cipher.c clientloop.c gss-serv.c kex.c]
[kexdhc.c kexdhs.c kexecdhc.c kexgexc.c kexecdhs.c kexgexs.c key.c]
[monitor.c monitor_wrap.c packet.c readpass.c rsa.c serverloop.c]
[ssh-add.c ssh-agent.c ssh-dss.c ssh-ecdsa.c ssh-ed25519.c]
[ssh-keygen.c ssh-rsa.c sshconnect.c sshconnect1.c sshconnect2.c]
[sshd.c]
convert memset of potentially-private data to explicit_bzero()
|
|
[bufaux.c buffer.h kex.c kex.h kexc25519.c kexc25519c.c kexc25519s.c]
[kexdhc.c kexdhs.c kexecdhc.c kexecdhs.c kexgexc.c kexgexs.c]
avoid use of OpenSSL BIGNUM type and functions for KEX with
Curve25519 by adding a buffer_put_bignum2_from_string() that stores
a string using the bignum encoding rules. Will make it easier to
build a reduced-feature OpenSSH without OpenSSL in the future;
ok markus@
|
|
[digest.c digest.h hostfile.c kex.c kex.h kexc25519.c kexc25519c.c]
[kexc25519s.c kexdh.c kexecdh.c kexecdhc.c kexecdhs.c kexgex.c kexgexc.c]
[kexgexs.c key.c key.h roaming_client.c roaming_common.c schnorr.c]
[schnorr.h ssh-dss.c ssh-ecdsa.c ssh-rsa.c sshconnect2.c]
Introduce digest API and use it to perform all hashing operations
rather than calling OpenSSL EVP_Digest* directly. Will make it easier
to build a reduced-feature OpenSSH without OpenSSL in future;
feedback, ok markus@
|
|
[auth.h kex.h kexdhs.c kexecdhs.c kexgexs.c monitor.c servconf.c]
[servconf.h session.c sshd.c sshd_config.5]
add ssh-agent(1) support to sshd(8); allows encrypted hostkeys,
or hostkeys on smartcards; most of the work by Zev Weiss; bz #1974
ok djm@
|
|
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c
ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c
gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c
auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c
servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c
auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c
sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c
kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c
kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c
monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c
ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c
sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c
ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c
dns.c packet.c readpass.c authfd.c moduli.c]
bye, bye xfree(); ok markus@
|
|
[kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c moduli.c]
use only libcrypto APIs that are retained with OPENSSL_NO_DEPRECATED.
these have been around for years by this time. ok markus
|
|
- djm@cvs.openbsd.org 2010/02/26 20:29:54
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c]
[auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c]
[hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c]
[myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c]
[sshconnect2.c sshd.8 sshd.c sshd_config.5]
Add support for certificate key types for users and hosts.
OpenSSH certificate key types are not X.509 certificates, but a much
simpler format that encodes a public key, identity information and
some validity constraints and signs it with a CA key. CA keys are
regular SSH keys. This certificate style avoids the attack surface
of X.509 certificates and is very easy to deploy.
Certified host keys allow automatic acceptance of new host keys
when a CA certificate is marked as sh/known_hosts.
see VERIFYING HOST KEYS in ssh(1) for details.
Certified user keys allow authentication of users when the signing
CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS
FILE FORMAT" in sshd(8) for details.
Certificates are minted using ssh-keygen(1), documentation is in
the "CERTIFICATES" section of that manpage.
Documentation on the format of certificates is in the file
PROTOCOL.certkeys
feedback and ok markus@
|
|
[kexdhs.c kexgexs.c]
abort if key_sign fails, preventing possible null deref. Based on report
from Paolo Ganci, ok markus@ djm@
|
|
[kexgexs.c]
fix hash calculation for KEXGEX: hash over the original client-supplied
values and not the sanity checked versions that we acutally use;
bz#1540 reported by john.smith AT arrows.demon.co.uk
ok markus@
|
|
[auth-rsa.c kexgexc.c kexdhs.c key.c ssh-dss.c sshd.c kexgexs.c
ssh-keygen.c bufbn.c moduli.c scard.c kexdhc.c sshconnect1.c dh.c rsa.c]
add missing checks for openssl return codes; with & ok djm@
|
|
[kexdhc.c kexdhs.c kexgexc.c kexgexs.c]
check DH_compute_key() for -1 even if it should not happen because of
earlier calls to dh_pub_is_valid(); report krahmer at suse.de; ok djm
|
|
[auth-rsa.c auth-shadow.c auth-sia.c auth1.c auth2-chall.c]
[auth2-gss.c auth2-kbdint.c auth2-none.c authfd.c authfile.c]
[cipher-3des1.c cipher-aes.c cipher-bf1.c cipher-ctr.c clientloop.c]
[dh.c dns.c entropy.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c loginrec.c mac.c]
[md5crypt.c monitor.c monitor_wrap.c readconf.c rsa.c]
[scard-opensc.c scard.c session.c ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.c ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c]
[sshconnect1.c sshconnect2.c sshd.c rc4.diff]
[openbsd-compat/bsd-cray.c openbsd-compat/port-aix.c]
[openbsd-compat/port-linux.c openbsd-compat/port-solaris.c]
[openbsd-compat/port-uw.c]
Lots of headers for SCO OSR6, mainly adding stdarg.h for log.h;
compile problems reported by rac AT tenzing.org
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c]
[auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c]
[channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c]
[kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c]
[monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c]
[servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c]
[sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c]
[uuencode.h xmalloc.c]
move #include <stdio.h> out of includes.h
|
|
[atomicio.c auth.c dh.c authfile.c buffer.c clientloop.c kex.c]
[groupaccess.c gss-genr.c kexgexs.c misc.c monitor.c monitor_mm.c]
[packet.c scp.c serverloop.c session.c sftp-client.c sftp-common.c]
[sftp-server.c sftp.c ssh-add.c ssh-agent.c ssh-keygen.c sshlogin.c]
[uidswap.c xmalloc.c]
move #include <sys/param.h> out of includes.h
|
|
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c]
[auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c]
[authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c]
[cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c]
[compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c]
[includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c]
[progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c]
move #include <string.h> out of includes.h
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c]
[auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c]
[auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c]
[buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c]
[cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c]
[deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c]
[kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c]
[readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c]
[sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c]
Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that
Theo nuked - our scripts to sync -portable need them in the files
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c]
[auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c]
[auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c]
[auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c]
[canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c]
[groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c]
[kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c]
[loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c]
[nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c]
[scard.c scp.c servconf.c serverloop.c session.c sftp-client.c]
[sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c]
[ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c]
[ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c]
[openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c]
[openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c]
[openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c]
[openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c]
RCSID() can die
|
|
[kex.c kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c]
remove hardcoded hash lengths in key exchange code, allowing
implementation of KEX methods with different hashes (e.g. SHA-256);
ok markus@ dtucker@ stevesk@
|
|
[kex.c kexdh.c kexgex.c kex.h sshconnect2.c sshd.c ssh-keyscan.c]
split kex into client and server code, no need to link
server code into the client; ok provos@
|
