summaryrefslogtreecommitdiff
path: root/log.c
AgeCommit message (Collapse)Author
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-06-10 - dtucker@cvs.openbsd.org 2008/06/10 04:50:25Darren Tucker
[sshd.c channels.h channels.c log.c servconf.c log.h servconf.h sshd.8] Add extended test mode (-T) and connection parameters for test mode (-C). -T causes sshd to write its effective configuration to stdout and exit. -C causes any relevant Match rules to be applied before output. The combination allows tesing of the parser and config files. ok deraadt djm
2007-12-24* New upstream release (closes: #453367).Colin Watson
- CVE-2007-4752: Prevent ssh(1) from using a trusted X11 cookie if creation of an untrusted cookie fails; found and fixed by Jan Pechanec (closes: #444738). - sshd(8) in new installations defaults to SSH Protocol 2 only. Existing installations are unchanged. - The SSH channel window size has been increased, and both ssh(1) sshd(8) now send window updates more aggressively. These improves performance on high-BDP (Bandwidth Delay Product) networks. - ssh(1) and sshd(8) now preserve MAC contexts between packets, which saves 2 hash calls per packet and results in 12-16% speedup for arcfour256/hmac-md5. - A new MAC algorithm has been added, UMAC-64 (RFC4418) as "umac-64@openssh.com". UMAC-64 has been measured to be approximately 20% faster than HMAC-MD5. - Failure to establish a ssh(1) TunnelForward is now treated as a fatal error when the ExitOnForwardFailure option is set. - ssh(1) returns a sensible exit status if the control master goes away without passing the full exit status. - When using a ProxyCommand in ssh(1), set the outgoing hostname with gethostname(2), allowing hostbased authentication to work. - Make scp(1) skip FIFOs rather than hanging (closes: #246774). - Encode non-printing characters in scp(1) filenames. These could cause copies to be aborted with a "protocol error". - Handle SIGINT in sshd(8) privilege separation child process to ensure that wtmp and lastlog records are correctly updated. - Report GSSAPI mechanism in errors, for libraries that support multiple mechanisms. - Improve documentation for ssh-add(1)'s -d option. - Rearrange and tidy GSSAPI code, removing server-only code being linked into the client. - Delay execution of ssh(1)'s LocalCommand until after all forwardings have been established. - In scp(1), do not truncate non-regular files. - Improve exit message from ControlMaster clients. - Prevent sftp-server(8) from reading until it runs out of buffer space, whereupon it would exit with a fatal error (closes: #365541). - pam_end() was not being called if authentication failed (closes: #405041). - Manual page datestamps updated (closes: #433181).
2007-06-13* Fix ordering of SYSLOG_LEVEL_QUIET and SYSLOG_LEVEL_FATAL.Colin Watson
2007-06-12* New upstream release (closes: #395507, #397961, #420035). ImportantColin Watson
changes not previously backported to 4.3p2: - 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4): + On portable OpenSSH, fix a GSSAPI authentication abort that could be used to determine the validity of usernames on some platforms. + Implemented conditional configuration in sshd_config(5) using the "Match" directive. This allows some configuration options to be selectively overridden if specific criteria (based on user, group, hostname and/or address) are met. So far a useful subset of post-authentication options are supported and more are expected to be added in future releases. + Add support for Diffie-Hellman group exchange key agreement with a final hash of SHA256. + Added a "ForceCommand" directive to sshd_config(5). Similar to the command="..." option accepted in ~/.ssh/authorized_keys, this forces the execution of the specified command regardless of what the user requested. This is very useful in conjunction with the new "Match" option. + Add a "PermitOpen" directive to sshd_config(5). This mirrors the permitopen="..." authorized_keys option, allowing fine-grained control over the port-forwardings that a user is allowed to establish. + Add optional logging of transactions to sftp-server(8). + ssh(1) will now record port numbers for hosts stored in ~/.ssh/known_hosts when a non-standard port has been requested (closes: #50612). + Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a non-zero exit code) when requested port forwardings could not be established. + Extend sshd_config(5) "SubSystem" declarations to allow the specification of command-line arguments. + Replacement of all integer overflow susceptible invocations of malloc(3) and realloc(3) with overflow-checking equivalents. + Many manpage fixes and improvements. + Add optional support for OpenSSL hardware accelerators (engines), enabled using the --with-ssl-engine configure option. + Tokens in configuration files may be double-quoted in order to contain spaces (closes: #319639). + Move a debug() call out of a SIGCHLD handler, fixing a hang when the session exits very quickly (closes: #307890). + Fix some incorrect buffer allocation calculations (closes: #410599). + ssh-add doesn't ask for a passphrase if key file permissions are too liberal (closes: #103677). + Likewise, ssh doesn't ask either (closes: #99675). - 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6): + sshd now allows the enabling and disabling of authentication methods on a per user, group, host and network basis via the Match directive in sshd_config. + Fixed an inconsistent check for a terminal when displaying scp progress meter (closes: #257524). + Fix "hang on exit" when background processes are running at the time of exit on a ttyful/login session (closes: #88337). * Update to current GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch; install ChangeLog.gssapi.
2007-05-20 - djm@cvs.openbsd.org 2007/05/17 07:50:31Darren Tucker
[log.c] save and restore errno when logging; ok deraadt@
2006-09-29 - CVE-2006-5051: Fix an unsafe signal hander reported by Mark Dowd. TheColin Watson
signal handler was vulnerable to a race condition that could be exploited to perform a pre-authentication denial of service. On portable OpenSSH, this vulnerability could theoretically lead to pre-authentication remote code execution if GSSAPI authentication is enabled, but the likelihood of successful exploitation appears remote.
2006-08-20 - (dtucker) [log.c] Move ifdef to prevent unused variable warning.Darren Tucker
2006-08-19 - (djm) Disable sigdie() for platforms that cannot safely syslog insideDamien Miller
a signal handler (basically all of them, excepting OpenBSD); ok dtucker@
2006-08-19 - deraadt@cvs.openbsd.org 2006/08/18 09:13:26Damien Miller
[log.c log.h sshd.c] make signal handler termination path shorter; risky code pointed out by mark dowd; ok djm markus
2006-08-05 - deraadt@cvs.openbsd.org 2006/08/03 03:34:42Damien Miller
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c] [auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ] [auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c] [buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c] [groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c] [key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c] [monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c] [readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h] [serverloop.c session.c session.h sftp-client.c sftp-common.c] [sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c] [ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c] [uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h] [loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h] almost entirely get rid of the culture of ".h files that include .h files" ok djm, sort of ok stevesk makes the pain stop in one easy step NB. portable commit contains everything *except* removing includes.h, as that will take a fair bit more work as we move headers that are required for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-08-05 - stevesk@cvs.openbsd.org 2006/08/01 23:22:48Damien Miller
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c] [auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c] [channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c] [kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c] [monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c] [servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c] [uuencode.h xmalloc.c] move #include <stdio.h> out of includes.h
2006-08-05 - stevesk@cvs.openbsd.org 2006/07/26 13:57:17Damien Miller
[authfd.c authfile.c dh.c canohost.c channels.c clientloop.c compat.c] [hostfile.c kex.c log.c misc.c moduli.c monitor.c packet.c readpass.c] [scp.c servconf.c session.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c sshconnect.c] [sshconnect1.c sshd.c xmalloc.c] move #include <stdlib.h> out of includes.h
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/22 20:48:23Damien Miller
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c] [auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c] [authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c] [cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c] [compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c] [includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c] [progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c] move #include <string.h> out of includes.h
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/17 01:31:10Damien Miller
[authfd.c authfile.c channels.c cleanup.c clientloop.c groupaccess.c] [includes.h log.c misc.c msg.c packet.c progressmeter.c readconf.c] [readpass.c scp.c servconf.c sftp-client.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c] [sshconnect.c sshlogin.c sshpty.c uidswap.c] move #include <unistd.h> out of includes.h
2006-07-12 - stevesk@cvs.openbsd.org 2006/07/10 16:37:36Darren Tucker
[readpass.c log.h scp.c fatal.c xmalloc.c includes.h ssh-keyscan.c misc.c auth.c packet.c log.c] move #include <stdarg.h> out of includes.h; ok markus@
2006-07-10 - stevesk@cvs.openbsd.org 2006/07/08 23:30:06Damien Miller
[log.c] move user includes after /usr/include files
2006-03-26 - djm@cvs.openbsd.org 2006/03/25 13:17:03Damien Miller
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c] [auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c] [auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c] [auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c] [buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c] [cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c] [deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c] [kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c] [readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c] [sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c] [sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c] [uidswap.c uuencode.c xmalloc.c] Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that Theo nuked - our scripts to sync -portable need them in the files
2006-03-26 - deraadt@cvs.openbsd.org 2006/03/19 18:51:18Damien Miller
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c] [auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c] [auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c] [auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c] [canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c] [groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c] [kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c] [loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c] [nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c] [scard.c scp.c servconf.c serverloop.c session.c sftp-client.c] [sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c] [ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c] [ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c] [sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c] [uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c] [openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c] [openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c] [openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c] [openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c] RCSID() can die
2005-05-30Merge 4.1p1 to the trunk.Colin Watson
2005-05-25Merge 4.0p1 to the trunk.Colin Watson
2005-03-09 - (djm) [log.c] Fix dumb syntax error; ok dtucker@Darren Tucker
(pulled from 4.0 branch).
2005-03-09 - (djm) [log.c] Fix dumb syntax error; ok dtucker@Damien Miller
2005-02-01 - (dtucker) [log.c] Bug #973: force log_init() to open syslog, since on someDarren Tucker
platforms syslog will revert to its default values. This may result in messages from external libraries (eg libwrap) being sent to a different facility.
2005-01-04Merge 3.9p1 to the trunk.Colin Watson
2004-07-21 - (djm) [log.c] bz #111: Escape more control characters when sending dataDamien Miller
to syslog; from peak AT argo.troja.mff.cuni.cz
2004-03-01Merge 3.8p1 to the trunk. This builds and runs, but I haven't tested itColin Watson
extensively yet. ProtocolKeepAlives is now just a compatibility alias for ServerAliveInterval.
2004-02-18 - (djm) [log.c] Tighten openlog_r testsDamien Miller
2004-02-18 - (djm) [log.c] Correct use of HAVE_OPENLOG_RDamien Miller
2003-10-02 - markus@cvs.openbsd.org 2003/09/23 20:17:11Darren Tucker
[Makefile.in auth1.c auth2.c auth.c auth.h auth-krb5.c canohost.c cleanup.c clientloop.c fatal.c gss-serv.c log.c log.h monitor.c monitor.h monitor_wrap.c monitor_wrap.h packet.c serverloop.c session.c session.h ssh-agent.c sshd.c] replace fatal_cleanup() and linked list of fatal callbacks with static cleanup_exit() function. re-refine cleanup_exit() where appropriate, allocate sshd's authctxt eary to allow simpler cleanup in sshd. tested by many, ok deraadt@
2003-09-23Merge 3.7.1p2 to the trunk. I have absolutely no idea yet whether this willColin Watson
work.
2003-09-23 - (djm) Sync with V_3_7 branch:Damien Miller
- (djm) Fix SSH1 challenge kludge - (djm) Bug #671: Fix builds on OpenBSD - (djm) Bug #676: Fix PAM stack corruption - (djm) Fix bad free() in PAM code - (djm) Don't call pam_end before pam_init - (djm) Enable build with old OpenSSL again - (djm) Trim deprecated options from INSTALL. Mention UsePAM - (djm) Fix quote handling in sftp; Patch from admorten AT umich.edu
2003-09-23 - (djm) Fix SSH1 challenge kludgeDamien Miller
- (djm) Bug #671: Fix builds on OpenBSD - (djm) Bug #676: Fix PAM stack corruption - (djm) Fix bad free() in PAM code - (djm) Don't call pam_end before pam_init - (djm) Enable build with old OpenSSL again - (djm) Trim deprecated options from INSTALL. Mention UsePAM - (djm) Fix quote handling in sftp; Patch from admorten AT umich.edu
2003-09-01Debian release 3.6p1-1.Colin Watson
2003-09-01Debian release 3.5p1-1.Colin Watson
2003-09-01Debian release 3.4p1-1.Colin Watson
2003-05-25remove #include we don't needDamien Miller
2003-05-25- (djm) OpenBSD CVS SyncDamien Miller
- djm@cvs.openbsd.org 2003/05/24 09:02:22 [log.c] pass logged data through strnvis; ok markus
2003-05-23 - (djm) Use VIS_SAFE on logged strings rather than default strnvisDamien Miller
encoding (which encodes many more characters)
2003-05-20 - deraadt@cvs.openbsd.org 2003/05/18 23:22:01Damien Miller
[log.c] use syslog_r() in a signal handler called place; markus ok
2003-05-14 - (djm) RCSID sync w/ OpenBSDDamien Miller
2003-04-09*** empty log message ***Damien Miller
2003-01-14 - markus@cvs.openbsd.org 2003/01/11 18:29:43Damien Miller
[log.c] set fatal_cleanups to NULL in fatal_remove_all_cleanups(); dtucker@zip.com.au
2003-01-07 - (djm) Bug #111: Run syslog and stderr logging through strnvis to eliminateDamien Miller
nasties. Report from peak@argo.troja.mff.cuni.cz
2002-07-23 - markus@cvs.openbsd.org 2002/07/19 15:43:33Ben Lindstrom
[log.c log.h session.c sshd.c] remove fatal cleanups after fork; based on discussions with and code from solar.
2002-07-07 - deraadt@cvs.openbsd.org 2002/07/06 01:00:49Ben Lindstrom
[log.c] KNF
2002-02-26 - markus@cvs.openbsd.org 2002/02/22 12:20:34Ben Lindstrom
[log.c log.h ssh-keyscan.c] overwrite fatal() in ssh-keyscan.c; fixes pr 2354; ok provos@
2002-02-05 - markus@cvs.openbsd.org 2002/02/04 12:15:25Damien Miller
[log.c log.h readconf.c servconf.c] add SYSLOG_FACILITY_NOT_SET = -1, SYSLOG_LEVEL_NOT_SET = -1, fixes arm/netbsd; based on patch from bjh21@netbsd.org; ok djm@
2002-01-22 - stevesk@cvs.openbsd.org 2002/01/17 04:27:37Damien Miller
[log.c] casts to silence enum type warnings for bugzilla bug 37; ok markus@
2001-12-21 - deraadt@cvs.openbsd.org 2001/12/19 07:18:56Damien Miller
[auth1.c auth2.c auth2-chall.c auth-bsdauth.c auth.c authfile.c auth.h] [auth-krb4.c auth-rhosts.c auth-skey.c bufaux.c canohost.c channels.c] [cipher.c clientloop.c compat.c compress.c deattack.c key.c log.c mac.c] [match.c misc.c nchan.c packet.c readconf.c rijndael.c rijndael.h scard.c] [servconf.c servconf.h serverloop.c session.c sftp.c sftp-client.c] [sftp-glob.c sftp-int.c sftp-server.c ssh-add.c ssh-agent.c ssh.c] [sshconnect1.c sshconnect2.c sshconnect.c sshd.8 sshd.c sshd_config] [ssh-keygen.c sshlogin.c sshpty.c sshtty.c ttymodes.c uidswap.c] basic KNF done while i was looking for something else