summaryrefslogtreecommitdiff
path: root/log.h
AgeCommit message (Collapse)Author
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-06-13 - dtucker@cvs.openbsd.org 2008/06/13 00:12:02Darren Tucker
[sftp.h log.h] replace __dead with __attribute__((noreturn)), makes things a little easier to port. Also, add it to sigdie(). ok djm@
2008-06-10 - dtucker@cvs.openbsd.org 2008/06/10 04:50:25Darren Tucker
[sshd.c channels.h channels.c log.c servconf.c log.h servconf.h sshd.8] Add extended test mode (-T) and connection parameters for test mode (-C). -T causes sshd to write its effective configuration to stdout and exit. -C causes any relevant Match rules to be applied before output. The combination allows tesing of the parser and config files. ok deraadt djm
2007-06-13* Fix ordering of SYSLOG_LEVEL_QUIET and SYSLOG_LEVEL_FATAL.Colin Watson
2007-06-12* New upstream release (closes: #395507, #397961, #420035). ImportantColin Watson
changes not previously backported to 4.3p2: - 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4): + On portable OpenSSH, fix a GSSAPI authentication abort that could be used to determine the validity of usernames on some platforms. + Implemented conditional configuration in sshd_config(5) using the "Match" directive. This allows some configuration options to be selectively overridden if specific criteria (based on user, group, hostname and/or address) are met. So far a useful subset of post-authentication options are supported and more are expected to be added in future releases. + Add support for Diffie-Hellman group exchange key agreement with a final hash of SHA256. + Added a "ForceCommand" directive to sshd_config(5). Similar to the command="..." option accepted in ~/.ssh/authorized_keys, this forces the execution of the specified command regardless of what the user requested. This is very useful in conjunction with the new "Match" option. + Add a "PermitOpen" directive to sshd_config(5). This mirrors the permitopen="..." authorized_keys option, allowing fine-grained control over the port-forwardings that a user is allowed to establish. + Add optional logging of transactions to sftp-server(8). + ssh(1) will now record port numbers for hosts stored in ~/.ssh/known_hosts when a non-standard port has been requested (closes: #50612). + Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a non-zero exit code) when requested port forwardings could not be established. + Extend sshd_config(5) "SubSystem" declarations to allow the specification of command-line arguments. + Replacement of all integer overflow susceptible invocations of malloc(3) and realloc(3) with overflow-checking equivalents. + Many manpage fixes and improvements. + Add optional support for OpenSSL hardware accelerators (engines), enabled using the --with-ssl-engine configure option. + Tokens in configuration files may be double-quoted in order to contain spaces (closes: #319639). + Move a debug() call out of a SIGCHLD handler, fixing a hang when the session exits very quickly (closes: #307890). + Fix some incorrect buffer allocation calculations (closes: #410599). + ssh-add doesn't ask for a passphrase if key file permissions are too liberal (closes: #103677). + Likewise, ssh doesn't ask either (closes: #99675). - 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6): + sshd now allows the enabling and disabling of authentication methods on a per user, group, host and network basis via the Match directive in sshd_config. + Fixed an inconsistent check for a terminal when displaying scp progress meter (closes: #257524). + Fix "hang on exit" when background processes are running at the time of exit on a ttyful/login session (closes: #88337). * Update to current GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch; install ChangeLog.gssapi.
2006-09-29 - CVE-2006-5051: Fix an unsafe signal hander reported by Mark Dowd. TheColin Watson
signal handler was vulnerable to a race condition that could be exploited to perform a pre-authentication denial of service. On portable OpenSSH, this vulnerability could theoretically lead to pre-authentication remote code execution if GSSAPI authentication is enabled, but the likelihood of successful exploitation appears remote.
2006-08-19 - deraadt@cvs.openbsd.org 2006/08/18 09:13:26Damien Miller
[log.c log.h sshd.c] make signal handler termination path shorter; risky code pointed out by mark dowd; ok djm markus
2006-08-05 - deraadt@cvs.openbsd.org 2006/08/03 03:34:42Damien Miller
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c] [auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ] [auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c] [buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c] [groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c] [key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c] [monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c] [readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h] [serverloop.c session.c session.h sftp-client.c sftp-common.c] [sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c] [ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c] [uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h] [loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h] almost entirely get rid of the culture of ".h files that include .h files" ok djm, sort of ok stevesk makes the pain stop in one easy step NB. portable commit contains everything *except* removing includes.h, as that will take a fair bit more work as we move headers that are required for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-07-24 - (djm) [acss.c auth-krb5.c auth-options.c auth-pam.c auth-shadow.c]Damien Miller
[canohost.c channels.c cipher-acss.c defines.h dns.c gss-genr.c] [gss-serv-krb5.c gss-serv.c log.h loginrec.c logintest.c readconf.c] [servconf.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rand-helper.c] [ssh.c sshconnect.c sshd.c openbsd-compat/bindresvport.c] [openbsd-compat/bsd-arc4random.c openbsd-compat/bsd-misc.c] [openbsd-compat/getrrsetbyname.c openbsd-compat/glob.c] [openbsd-compat/mktemp.c openbsd-compat/port-linux.c] [openbsd-compat/port-tun.c openbsd-compat/readpassphrase.c] [openbsd-compat/setproctitle.c openbsd-compat/xmmap.c] make the portable tree compile again - sprinkle unistd.h and string.h back in. Don't redefine __unused, as it turned out to be used in headers on Linux, and replace its use in auth-pam.c with ARGSUSED
2006-07-12 - stevesk@cvs.openbsd.org 2006/07/10 16:37:36Darren Tucker
[readpass.c log.h scp.c fatal.c xmalloc.c includes.h ssh-keyscan.c misc.c auth.c packet.c log.c] move #include <stdarg.h> out of includes.h; ok markus@
2006-03-26 - djm@cvs.openbsd.org 2006/03/25 22:22:43Damien Miller
[atomicio.h auth-options.h auth.h auth2-gss.c authfd.h authfile.h] [bufaux.h buffer.h canohost.h channels.h cipher.h clientloop.h] [compat.h compress.h crc32.c crc32.h deattack.h dh.h dispatch.h] [dns.c dns.h getput.h groupaccess.h gss-genr.c gss-serv-krb5.c] [gss-serv.c hostfile.h includes.h kex.h key.h log.h mac.h match.h] [misc.h monitor.h monitor_fdpass.h monitor_mm.h monitor_wrap.h msg.h] [myproposal.h packet.h pathnames.h progressmeter.h readconf.h rsa.h] [scard.h servconf.h serverloop.h session.h sftp-common.h sftp.h] [ssh-gss.h ssh.h ssh1.h ssh2.h sshconnect.h sshlogin.h sshpty.h] [ttymodes.h uidswap.h uuencode.h xmalloc.h] standardise spacing in $OpenBSD$ tags; requested by deraadt@
2005-01-04Merge 3.9p1 to the trunk.Colin Watson
2004-06-22 - djm@cvs.openbsd.org 2004/06/21 22:02:58Darren Tucker
[log.h] mark fatal and cleanup exit as __dead; ok markus@
2004-03-01Merge 3.8p1 to the trunk. This builds and runs, but I haven't tested itColin Watson
extensively yet. ProtocolKeepAlives is now just a compatibility alias for ServerAliveInterval.
2003-10-02 - markus@cvs.openbsd.org 2003/09/23 20:17:11Darren Tucker
[Makefile.in auth1.c auth2.c auth.c auth.h auth-krb5.c canohost.c cleanup.c clientloop.c fatal.c gss-serv.c log.c log.h monitor.c monitor.h monitor_wrap.c monitor_wrap.h packet.c serverloop.c session.c session.h ssh-agent.c sshd.c] replace fatal_cleanup() and linked list of fatal callbacks with static cleanup_exit() function. re-refine cleanup_exit() where appropriate, allocate sshd's authctxt eary to allow simpler cleanup in sshd. tested by many, ok deraadt@
2003-09-23Merge 3.7.1p2 to the trunk. I have absolutely no idea yet whether this willColin Watson
work.
2003-09-01Debian release 3.5p1-1.Colin Watson
2003-09-01Debian release 3.4p1-1.Colin Watson
2003-05-14 - (djm) RCSID sync w/ OpenBSDDamien Miller
2003-04-09*** empty log message ***Damien Miller
2002-07-23 - markus@cvs.openbsd.org 2002/07/19 15:43:33Ben Lindstrom
[log.c log.h session.c sshd.c] remove fatal cleanups after fork; based on discussions with and code from solar.
2002-06-06 - deraadt@cvs.openbsd.org 2002/05/19 20:54:52Ben Lindstrom
[log.h] extra commas in enum not 100% portable
2002-02-26 - markus@cvs.openbsd.org 2002/02/22 12:20:34Ben Lindstrom
[log.c log.h ssh-keyscan.c] overwrite fatal() in ssh-keyscan.c; fixes pr 2354; ok provos@
2002-02-05 - markus@cvs.openbsd.org 2002/02/04 12:15:25Damien Miller
[log.c log.h readconf.c servconf.c] add SYSLOG_FACILITY_NOT_SET = -1, SYSLOG_LEVEL_NOT_SET = -1, fixes arm/netbsd; based on patch from bjh21@netbsd.org; ok djm@
2001-07-04 - markus@cvs.openbsd.org 2001/06/26 17:27:25Ben Lindstrom
[authfd.h authfile.h auth.h auth-options.h bufaux.h buffer.h canohost.h channels.h cipher.h clientloop.h compat.h compress.h crc32.h deattack.h dh.h dispatch.h groupaccess.c groupaccess.h hostfile.h kex.h key.h log.c log.h mac.h misc.c misc.h mpaux.h packet.h radix.h readconf.h readpass.h rsa.h servconf.h serverloop.h session.h sftp-common.c sftp-common.h sftp-glob.h sftp-int.h sshconnect.h ssh-dss.h sshlogin.h sshpty.h ssh-rsa.h sshtty.h tildexpand.h uidswap.h uuencode.h xmalloc.h] remove comments from .h, since they are cut&paste from the .c files and out of sync
2001-07-04 - itojun@cvs.openbsd.org 2001/06/26 06:32:58Ben Lindstrom
[atomicio.h authfd.h authfile.h auth.h auth-options.h bufaux.h buffer.h canohost.h channels.h cipher.h clientloop.h compat.h compress.h crc32.h deattack.h dh.h dispatch.h groupaccess.h hostfile.h kex.h key.h log.h mac.h match.h misc.h mpaux.h packet.h radix.h readconf.h readpass.h rsa.h] prototype pedant. not very creative... - () -> (void) - no variable names
2001-03-05 - (djm) Fix up LOG_AUTHPRIV for systems that have itDamien Miller
2001-02-05 - stevesk@cvs.openbsd.org 2001/02/04 08:32:27Kevin Steves
[many files; did this manually to our top-level source dir] unexpand and remove end-of-line whitespace; ok markus@
2001-01-29 - niklas@cvs.openbsd.org 2001/01/2001Ben Lindstrom
[atomicio.h canohost.h clientloop.h deattack.h dh.h dispatch.h groupaccess.c groupaccess.h hmac.h hostfile.h includes.h kex.h key.h log.h login.h match.h misc.h myproposal.h nchan.ms pathnames.h radix.h readpass.h rijndael.h serverloop.h session.h sftp.h ssh-add.1 ssh-dss.h ssh-keygen.1 ssh-keyscan.1 ssh-rsa.h ssh1.h ssh_config sshconnect.h sshd_config tildexpand.h uidswap.h uuencode.h] $OpenBSD$
2001-01-22Hopefully things did not get mixed around too much. It compiles underBen Lindstrom
Linux and works. So that is at least a good sign. =) 20010122 - (bal) OpenBSD Resync - markus@cvs.openbsd.org 2001/01/19 12:45:26 GMT 2001 by markus [servconf.c ssh.h sshd.c] only auth-chall.c needs #ifdef SKEY - markus@cvs.openbsd.org 2001/01/19 15:55:10 GMT 2001 by markus [auth-krb4.c auth-options.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth1.c auth2.c channels.c clientloop.c dh.c dispatch.c nchan.c packet.c pathname.h readconf.c scp.c servconf.c serverloop.c session.c ssh-add.c ssh-keygen.c ssh-keyscan.c ssh.c ssh.h ssh1.h sshconnect1.c sshd.c ttymodes.c] move ssh1 definitions to ssh1.h, pathnames to pathnames.h - markus@cvs.openbsd.org 2001/01/19 16:48:14 [sshd.8] fix typo; from stevesk@ - markus@cvs.openbsd.org 2001/01/19 16:50:58 [ssh-dss.c] clear and free digest, make consistent with other code (use dlen); from stevesk@ - markus@cvs.openbsd.org 2001/01/20 15:55:20 GMT 2001 by markus [auth-options.c auth-options.h auth-rsa.c auth2.c] pass the filename to auth_parse_options() - markus@cvs.openbsd.org 2001/01/20 17:59:40 GMT 2001 [readconf.c] fix SIGSEGV from -o ""; problem noted by jehsom@togetherweb.com - stevesk@cvs.openbsd.org 2001/01/20 18:20:29 [sshconnect2.c] dh_new_group() does not return NULL. ok markus@ - markus@cvs.openbsd.org 2001/01/20 21:33:42 [ssh-add.c] do not loop forever if askpass does not exist; from andrew@pimlott.ne.mediaone.net - djm@cvs.openbsd.org 2001/01/20 23:00:56 [servconf.c] Check for NULL return from strdelim; ok markus - djm@cvs.openbsd.org 2001/01/20 23:02:07 [readconf.c] KNF; ok markus - jakob@cvs.openbsd.org 2001/01/21 9:00:33 [ssh-keygen.1] remove -R flag; ok markus@ - markus@cvs.openbsd.org 2001/01/21 19:05:40 [atomicio.c automicio.h auth-chall.c auth-krb4.c auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c auth2-chall.c auth2.c authfd.c authfile.c bufaux.c bufaux.h buffer.c canahost.c canahost.h channels.c cipher.c cli.c clientloop.c clientloop.h compat.c compress.c deattack.c dh.c dispatch.c groupaccess.c hmac.c hostfile.c kex.c key.c key.h log-client.c log-server.c log.c log.h login.c login.h match.c misc.c misc.h nchan.c packet.c pty.c radix.h readconf.c readpass.c readpass.h rsa.c scp.c servconf.c serverloop.c serverloop.h session.c sftp-server.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-rsa.c ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c sshd.c tildexpand.c tildexpand.h ttysmodes.c uidswap.c xmalloc.c] split ssh.h and try to cleanup the #include mess. remove unnecessary #includes. rename util.[ch] -> misc.[ch] - (bal) renamed 'PIDDIR' to '_PATH_SSH_PIDDIR' to match OpenBSD tree - (bal) Moved #ifdef KRB4 in auth-krb4.c above the #include to resolve conflict when compiling for non-kerb install - (bal) removed the #ifdef SKEY in auth1.c to match Markus' changes on 1/19.