| Age | Commit message (Collapse) | Author |
|---|
|
Replace atoi and strtol conversions for integer arguments
to config keywords with a checking wrapper around strtonum. This will
prevent and flag invalid and negative arguments to these keywords. ok djm@
OpenBSD-Commit-ID: 99ae3981f3d608a219ccb8d2fff635ae52c17998
|
|
Add monotime_ts and monotime_tv that return monotonic
timespec and timeval respectively. Replace calls to gettimeofday() in packet
timing with monotime_tv so that the callers will work over a clock step.
Should prevent integer overflow during clock steps reported by wangle6 at
huawei.com. "I like" markus@
OpenBSD-Commit-ID: 74d684264814ff806f197948b87aa732cb1b0b8a
|
|
|
|
add sshd_config RDomain keyword to place sshd and the
subsequent user session (including the shell and any TCP/IP forwardings) into
the specified rdomain(4)
ok markus@
Upstream-ID: be2358e86346b5cacf20d90f59f980b87d1af0f5
|
|
Add optional rdomain qualifier to sshd_config's
ListenAddress option to allow listening on a different rdomain(4), e.g.
ListenAddress 0.0.0.0 rdomain 4
Upstream-ID: 24b6622c376feeed9e9be8b9605e593695ac9091
|
|
Kill dead store and some spaces vs. tabs indent in
parse_user_host_path(). Noticed by markus@
Upstream-ID: 114fec91dadf9af46c7c94fd40fc630ea2de8200
|
|
Expose devices allocated for tun/tap forwarding.
At the client, the device may be obtained from a new %T expansion
for LocalCommand.
At the server, the allocated devices will be listed in a
SSH_TUNNEL variable exposed to the environment of any user sessions
started after the tunnel forwarding was established.
ok markus
Upstream-ID: e61e53f8ae80566e9ddc0d67a5df5bdf2f3c9f9e
|
|
Add URI support to ssh, sftp and scp. For example
ssh://user@host or sftp://user@host/path. The connection parameters
described in draft-ietf-secsh-scp-sftp-ssh-uri-04 are not implemented since
the ssh fingerprint format in the draft uses md5 with no way to specify the
hash function type. OK djm@
Upstream-ID: 4ba3768b662d6722de59e6ecb00abf2d4bf9cacc
|
|
|
|
add a "quiet" flag to exited_cleanly() that supresses
errors about exit status (failure due to signal is still reported)
Upstream-ID: db85c39c3aa08e6ff67fc1fb4ffa89f807a9d2f0
|
|
Move several subprocess-related functions from various
locations to misc.c. Extend subprocess() to offer a little more control over
stdio disposition.
feedback & ok dtucker@
Upstream-ID: 3573dd7109d13ef9bd3bed93a3deb170fbfce049
|
|
Allow IPQoS=none in ssh/sshd to not set an explicit
ToS/DSCP value and just use the operating system default; ok dtucker@
Upstream-ID: 77906ff8c7b660b02ba7cb1e47b17d66f54f1f7e
|
|
Switch to recallocarray() for a few operations. Both
growth and shrinkage are handled safely, and there also is no need for
preallocation dances. Future changes in this area will be less error prone.
Review and one bug found by markus
Upstream-ID: 822d664d6a5a1d10eccb23acdd53578a679d5065
|
|
Fix convtime() overflow test on boundary condition,
spotted by & ok djm.
Upstream-ID: 51f14c507ea87a3022e63f574100613ab2ba5708
|
|
Check for integer overflow when parsing times in
convtime(). Reported by nicolas.iooss at m4x.org, ok djm@
Upstream-ID: 35e6a4e98f6fa24df50bfb8ba1307cf70e966f13
|
|
On startup, check to see if sshd is already daemonized
and if so, skip the call to daemon() and do not rewrite the PidFile. This
means that when sshd re-execs itself on SIGHUP the process ID will no longer
change. Should address bz#2641. ok djm@ markus@.
Upstream-ID: 5ea0355580056fb3b25c1fd6364307d9638a37b9
|
|
Factor out "can bind to low ports" check into its own function. This will
make it easier for Portable to support platforms with permissions models
other than uid==0 (eg bz#2625). ok djm@, "doesn't offend me too much"
deraadt@.
Upstream-ID: 86213df4183e92b8f189a6d2dac858c994bfface
|
|
Add a ProxyJump ssh_config(5) option and corresponding -J
ssh(1) command-line flag to allow simplified indirection through a SSH
bastion or "jump host".
These options construct a proxy command that connects to the
specified jump host(s) (more than one may be specified) and uses
port-forwarding to establish a connection to the next destination.
This codifies the safest way of indirecting connections through SSH
servers and makes it easy to use.
ok markus@
Upstream-ID: fa899cb8b26d889da8f142eb9774c1ea36b04397
|
|
don't record duplicate LocalForward and RemoteForward
entries; fixes failure with ExitOnForwardFailure+hostname canonicalisation
where the same forwards are added on the second pass through the
configuration file. bz#2562; ok dtucker@
Upstream-ID: 40a51d68b6300f1cc61deecdb7d4847b8b7b0de1
|
|
Another use for fcntl() and thus of the superfluous 3rd
parameter is when sanitising standard fd's before calling daemon().
Use a tweaked version of the ssh(1) function in all three places
found using fcntl() this way.
ok jca@ beck@
Upstream-ID: f16811ffa19a1c5f4ef383c5f0fecb843c84e218
|
|
Apply all of the portability changes in monotime() to monotime() double.
Fixes build on at least older FreeBSD systems.
|
|
Improve precision of progressmeter for sftp and scp by
storing sub-second timestamps. Pointed out by mmcc@, ok deraadt@ markus@
Upstream-ID: 38fd83a3d83dbf81c8ff7b5d1302382fe54970ab
|
|
Include sys/time.h for gettimeofday. From sortie at
maxsi.org.
Upstream-ID: 6ed0c33b836d9de0a664cd091e86523ecaa2fb3b
|
|
It isn't necessary and runs afoul of pledge(2) restrictions.
|
|
Properly handle invalid %-format by calling fatal.
ok deraadt, djm
Upstream-ID: 5692bce7d9f6eaa9c488cb93d3b55e758bef1eac
|
|
Handle the split of tun(4) "link0" into tap(4) in ssh
tun-forwarding. Adapted from portable (using separate devices for this is the
normal case in most OS). ok djm@
Upstream-ID: 90facf4c59ce73d6741db1bc926e578ef465cd39
|
|
don't try to change tun device flags if they are already
what we need; makes it possible to use tun/tap networking as non- root user
if device permissions and interface flags are pre-established; based on patch
by Ossi Herrala
Upstream-ID: 89099ac4634cd477b066865acf54cb230780fd21
|
|
rename xrealloc() to xreallocarray() since it follows
that form. ok djm
|
|
Replace <sys/param.h> with <limits.h> and other less
dirty headers where possible. Annotate <sys/param.h> lines with their
current reasons. Switch to PATH_MAX, NGROUPS_MAX, HOST_NAME_MAX+1,
LOGIN_NAME_MAX, etc. Change MIN() and MAX() to local definitions of
MINIMUM() and MAXIMUM() where sensible to avoid pulling in the pollution.
These are the files confirmed through binary verification. ok guenther,
millert, doug (helped with the verification protocol)
|
|
Remove unnecessary include: netinet/in_systm.h is not needed
by these programs.
NB. skipped for portable
ok deraadt@ millert@
|
|
|
|
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
|
|
when it is available. It takes into account time spent suspended,
thereby ensuring timeouts (e.g. for expiring agent keys) fire
correctly. bz#2228 reported by John Haxby
|
|
[misc.c misc.h umac.c]
use get/put_u32 to load values rather than *((UINT32 *)p) that breaks on
strict-alignment architectures; reported by and ok stsp@
|
|
[canohost.c misc.c misc.h readconf.c sftp-server.c ssh.c]
refactor client config code a little:
add multistate option partsing to readconf.c, similar to servconf.c's
existing code.
move checking of options that accept "none" as an argument to readconf.c
add a lowercase() function and use it instead of explicit tolower() in
loops
part of a larger diff that was ok markus@
|
|
mistakenly included in the previous commit.
|
|
CLOCK_MONOTONIC...) fails. Some older versions of RHEL have the
CLOCK_MONOTONIC define but don't actually support it. Found and tested
by Kevin Brott, ok djm.
|
|
[misc.c]
in ssh_gai_strerror() don't fallback to strerror for EAI_SYSTEM when
errno == 0. Avoids confusing error message in some broken resolver
cases. bz#2122 patch from plautrba AT redhat.com; ok dtucker
|
|
back to time(NULL) if we can't find it anywhere.
|
|
[ssh-agent.c clientloop.c misc.h packet.c progressmeter.c misc.c
channels.c sandbox-systrace.c]
Use clock_gettime(CLOCK_MONOTONIC ...) for ssh timers so that things like
keepalives and rekeying will work properly over clock steps. Suggested by
markus@, "looks good" djm@.
|
|
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c
ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c
gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c
auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c
servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c
auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c
sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c
kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c
kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c
monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c
ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c
sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c
ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c
dns.c packet.c readpass.c authfd.c moduli.c]
bye, bye xfree(); ok markus@
|
|
[misc.c]
remove extra parens noticed by nicm
|
|
[misc.c]
use xasprintf instead of a series of strlcats and strdup. ok djm
|
|
platforms, such as Android, that lack struct passwd.pw_gecos. Report
and initial patch from Nathan Osman bz#2086; feedback tim@ ok dtucker@
|
|
[misc.c]
fix typo in IPQoS parsing: there is no "AF14" class, but there is
an "AF21" class. Spotted by giesen AT snickers.org; ok markus stevesk
|
|
[misc.c misc.h servconf.c]
print ipqos friendly string for sshd -T; ok markus
# sshd -Tf sshd_config|grep ipqos
ipqos lowdelay throughput
|
|
|
|
[clientloop.c misc.c misc.h ssh-agent.1 ssh-agent.c]
honour $TMPDIR for client xauth and ssh-agent temporary directories;
feedback and ok markus@
|
|
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
|
|
[misc.c misc.h configure.ac openbsd-compat/openbsd-compat.h]
[openbsd-compat/timingsafe_bcmp.c]
Add timingsafe_bcmp(3) to libc, mention that it's already in the
kernel in kern(9), and remove it from OpenSSH.
ok deraadt@, djm@
NB. re-added under openbsd-compat/ for portable OpenSSH
|
