| Age | Commit message (Collapse) | Author |
|---|
|
[includes.h misc.c]
move #include <netinet/tcp.h> out of includes.h; ok markus@
|
|
|
|
[auth.c clientloop.c includes.h misc.c monitor.c readpass.c]
[session.c sftp.c ssh-agent.c ssh-keysign.c ssh.c sshconnect.c]
[sshd.c sshpty.c]
move #include <paths.h> out of includes.h; ok markus@
|
|
[misc.c misc.h scp.c sftp.c]
fix local arbitrary command execution vulnerability on local/local and
remote/remote copies (CVE-2006-0225, bz #1094), patch by
t8m AT centrum.cz, polished by dtucker@ and myself; ok markus@
|
|
[misc.c]
check that stdio file descriptors are actually closed before clobbering
them in sanitise_stdfd(). problems occurred when a lower numbered fd was
closed, but higher ones weren't. spotted by, and patch tested by
Frédéric Olivié
|
|
[misc.c]
clarify tun(4) opening - set the mode and bring the interface up. also
(re)sets the tun(4) layer 2 LINK0 flag for existing tunnel interfaces.
suggested and ok by djm@
|
|
[misc.c]
no trailing "\n" for debug()
|
|
[includes.h misc.c]
move <net/if.h>; ok djm@
|
|
[openbsd-compat/port-tun.c openbsd-compat/port-tun.h] Add support
for tunnel forwarding for FreeBSD and NetBSD. NetBSD's support is
limited to IPv4 tunnels only, and most versions don't support the
tap(4) device at all.
|
|
again by providing a sys_tun_open() function for your platform and
setting the CUSTOM_SYS_TUN_OPEN define. More work is required to match
OpenBSD's tunnel protocol, which prepends the address family to the
packet
|
|
[auth-options.c includes.h misc.c misc.h readconf.c servconf.c]
[serverloop.c ssh.c ssh_config.5 sshd_config.5 configure.ac]
two changes to the new ssh tunnel support. this breaks compatibility
with the initial commit but is required for a portable approach.
- make the tunnel id u_int and platform friendly, use predefined types.
- support configuration of layer 2 (ethernet) or layer 3
(point-to-point, default) modes. configuration is done using the
Tunnel (yes|point-to-point|ethernet|no) option is ssh_config(5) and
restricted by the PermitTunnel (yes|point-to-point|ethernet|no) option
in sshd_config(5).
ok djm@, man page bits by jmc@
|
|
[auth-options.c auth-options.h channels.c channels.h clientloop.c]
[misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h]
[serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c]
[sshconnect.h sshd.8 sshd_config sshd_config.5]
Add support for tun(4) forwarding over OpenSSH, based on an idea and
initial channel code bits by markus@. This is a simple and easy way to
use OpenSSH for ad hoc virtual private network connections, e.g.
administrative tunnels or secure wireless access. It's based on a new
ssh channel and works similar to the existing TCP forwarding support,
except that it depends on the tun(4) network interface on both ends of
the connection for layer 2 or layer 3 tunneling. This diff also adds
support for LocalCommand in the ssh(1) client.
ok djm@, markus@, jmc@ (manpages), tested and discussed with others
|
|
[sshd.c ssh.c misc.h sftp.c ssh-keygen.c ssh-keysign.c sftp-server.c
scp.c misc.c ssh-keyscan.c ssh-add.c ssh-agent.c]
ensure that stdio fds are attached; ok deraadt@
|
|
[misc.c]
Make comment match code; ok djm@
|
|
[channels.c clientloop.c clientloop.h misc.c misc.h ssh.c ssh_config.5]
implement support for X11 and agent forwarding over multiplex slave
connections. Because of protocol limitations, the slave connections inherit
the master's DISPLAY and SSH_AUTH_SOCK rather than distinctly forwarding
their own.
ok dtucker@ "put it in" deraadt@
|
|
[auth-rsa.c auth.c auth1.c auth2-chall.c auth2-gss.c authfd.c authfile.c]
[bufaux.c canohost.c channels.c cipher.c clientloop.c dns.c gss-serv.c]
[kex.c kex.h key.c mac.c match.c misc.c packet.c packet.h scp.c]
[servconf.c session.c session.h sftp-client.c sftp-server.c sftp.c]
[ssh-keyscan.c ssh-rsa.c sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
make this -Wsign-compare clean; ok avsm@ markus@
NB. auth1.c changes not committed yet (conflicts with uncommitted sync)
NB2. more work may be needed to make portable Wsign-compare clean
|
|
[auth.c auth.h misc.c misc.h ssh.c ssh_config.5 sshconnect.c]
introduce a generic %foo expansion function. replace existing % expansion
and add expansion to ControlPath; ok markus@
|
|
[misc.c misc.h tildexpand.c Makefile.in]
replace tilde_expand_filename with a simpler implementation, ahead of
more whacking; ok deraadt@
|
|
[misc.c ssh-keygen.c servconf.c clientloop.c auth-options.c ssh-add.c
monitor.c sftp-client.c bufaux.h hostfile.c ssh.c sshconnect.c channels.c
readconf.c bufaux.c sftp.c]
spacing
|
|
[auth-options.c channels.c channels.h clientloop.c compat.c compat.h]
[misc.c misc.h readconf.c readconf.h servconf.c ssh.1 ssh.c ssh_config.5]
[sshd_config.5]
bz#413: allow optional specification of bind address for port forwardings.
Patch originally by Dan Astorian, but worked on by several people
Adds GatewayPorts=clientspecified option on server to allow remote
forwards to bind to client-specified ports.
|
|
[auth-rsa.c auth2-pubkey.c authfile.c misc.c misc.h]
Fix debug call in error path of authorized_keys processing and fix related
warnings; ok djm@
|
|
[auth-rsa.c auth2-pubkey.c authfile.c misc.c misc.h ssh.h sshd.8]
Discard over-length authorized_keys entries rather than complaining when
they don't decode. bz #884, with & ok djm@
|
|
[channels.c channels.h clientloop.c misc.c misc.h serverloop.c ssh-agent.c]
some signed/unsigned int comparison cleanups; markus@ ok
|
|
[channels.c clientloop.c misc.c misc.h packet.c ssh-agent.c ssh-keyscan.c]
[sshd.c]
set_nonblock() instead of fnctl(...,O_NONBLOCK); "looks sane" deraadt@
|
|
[misc.c]
error->debug for getsockopt+TCP_NODELAY; several requests
|
|
[deattack.c misc.c session.c ssh-agent.c]
more buffer allocation fixes; from Solar Designer; CAN-2003-0682;
ok millert@
|
|
openbsd-compat/bsd-misc.c, s/mysignal/signal/ and #define signal to
be our 'mysignal' by default. OK djm@
|
|
[misc.c]
debug->debug2
|
|
[channels.c misc.c sshconnect2.c]
cleanup debug messages, more useful information for the client user.
|
|
[auth-krb5.c auth-options.h auth.h authfd.h authfile.h bufaux.h buffer.h
channels.h cipher.h compat.h compress.h crc32.h deattack.c getput.h
groupaccess.c misc.c mpaux.h packet.h readconf.h rsa.h scard.h
servconf.h ssh-agent.c ssh.h ssh2.h sshpty.h sshtty.c ttymodes.h
uuencode.c xmalloc.h]
$OpenBSD$ and RCSID() cleanup: don't use RCSID() in .h files; add
missing RCSID() to .c files and remove dup /*$OpenBSD$*/ from .c
files. ok markus@
|
|
[misc.c]
error-> debug, because O_NONBLOCK for /dev/null causes too many different
errnos; ok stevesk@, deraadt@
unused include
|
|
[misc.c]
use socklen_t
|
|
[channels.c misc.c]
disable Nagle in connect_to() and channel_post_port_listener() (port
forwarding endpoints). the intention is to preserve the on-the-wire
appearance to applications at either end; the applications can then
enable TCP_NODELAY according to their requirements. ok markus@
|
|
- stevesk@cvs.openbsd.org 2002/01/24 21:09:25
[channels.c misc.c misc.h packet.c]
add set_nodelay() to set TCP_NODELAY on a socket (prep for nagle tuning).
no nagle changes just yet; ok djm@ markus@
|
|
[auth1.c auth2.c auth2-chall.c auth-bsdauth.c auth.c authfile.c auth.h]
[auth-krb4.c auth-rhosts.c auth-skey.c bufaux.c canohost.c channels.c]
[cipher.c clientloop.c compat.c compress.c deattack.c key.c log.c mac.c]
[match.c misc.c nchan.c packet.c readconf.c rijndael.c rijndael.h scard.c]
[servconf.c servconf.h serverloop.c session.c sftp.c sftp-client.c]
[sftp-glob.c sftp-int.c sftp-server.c ssh-add.c ssh-agent.c ssh.c]
[sshconnect1.c sshconnect2.c sshconnect.c sshd.8 sshd.c sshd_config]
[ssh-keygen.c sshlogin.c sshpty.c sshtty.c ttymodes.c uidswap.c]
basic KNF done while i was looking for something else
|
|
[authfd.c authfile.c bufaux.c channels.c compat.c kex.c kexgex.c
key.c misc.c packet.c servconf.c ssh-agent.c sshconnect2.c
sshconnect.c sshd.c ssh-dss.c ssh-keygen.c ssh-rsa.c]
minor KNF
|
|
[authfd.h authfile.h auth.h auth-options.h bufaux.h buffer.h
canohost.h channels.h cipher.h clientloop.h compat.h compress.h
crc32.h deattack.h dh.h dispatch.h groupaccess.c groupaccess.h
hostfile.h kex.h key.h log.c log.h mac.h misc.c misc.h mpaux.h
packet.h radix.h readconf.h readpass.h rsa.h servconf.h serverloop.h
session.h sftp-common.c sftp-common.h sftp-glob.h sftp-int.h
sshconnect.h ssh-dss.h sshlogin.h sshpty.h ssh-rsa.h sshtty.h
tildexpand.h uidswap.h uuencode.h xmalloc.h]
remove comments from .h, since they are cut&paste from the .c files
and out of sync
|
|
|
|
[misc.c]
copy pw_expire and pw_change, too.
|
|
[misc.c]
typo; dunlap@apl.washington.edu
|
|
around grantpt().
|
|
[misc.c misc.h servconf.c sshd.8 sshd.c]
sshd command-line arguments and configuration file options that
specify time may be expressed using a sequence of the form:
time[qualifier], where time is a positive integer value and qualifier
is one of the following:
<none>,s,m,h,d,w
Examples:
600 600 seconds (10 minutes)
10m 10 minutes
1h30m 1 hour 30 minutes (90 minutes)
ok markus@
|
|
[clientloop.c misc.c misc.h]
add unset_nonblock for stdout/err flushing in client_loop().
|
|
[misc.c misc.h scp.c sftp.c]
Use addargs() in sftp plus some clean up of addargs(). OK Markus
|
|
[misc.c misc.h scp.c sftp.c]
Move colon() and cleanhost() to misc.c where I should I have put it in
the first place
|
|
[misc.c misc.h readconf.c servconf.c ssh.c sshd.c]
robust port validation; ok markus@ jakob@
|
|
|
|
[misc.c]
for completeness, copy pw_gecos too
|
|
[misc.c]
pull in protos
|
|
[auth.c auth.h auth1.c auth2.c misc.c misc.h ssh.c]
use pwcopy in ssh.c, too
|
