| Age | Commit message (Collapse) | Author |
|---|
|
- sftp(1): add support for resuming partial downloads using the "reget"
command and on the sftp commandline or on the "get" commandline using
the "-a" (append) option (closes: #158590).
- ssh(1): add an "IgnoreUnknown" configuration option to selectively
suppress errors arising from unknown configuration directives (closes:
#436052).
- sftp(1): update progressmeter when data is acknowledged, not when it's
sent (partially addresses #708372).
- ssh(1): do not fatally exit when attempting to cleanup multiplexing-
created channels that are incompletely opened (closes: #651357).
|
|
mistakenly included in the previous commit.
|
|
CLOCK_MONOTONIC...) fails. Some older versions of RHEL have the
CLOCK_MONOTONIC define but don't actually support it. Found and tested
by Kevin Brott, ok djm.
|
|
[misc.c]
in ssh_gai_strerror() don't fallback to strerror for EAI_SYSTEM when
errno == 0. Avoids confusing error message in some broken resolver
cases. bz#2122 patch from plautrba AT redhat.com; ok dtucker
|
|
back to time(NULL) if we can't find it anywhere.
|
|
[ssh-agent.c clientloop.c misc.h packet.c progressmeter.c misc.c
channels.c sandbox-systrace.c]
Use clock_gettime(CLOCK_MONOTONIC ...) for ssh timers so that things like
keepalives and rekeying will work properly over clock steps. Suggested by
markus@, "looks good" djm@.
|
|
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c
ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c
gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c
auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c
servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c
auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c
sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c
kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c
kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c
monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c
ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c
sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c
ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c
dns.c packet.c readpass.c authfd.c moduli.c]
bye, bye xfree(); ok markus@
|
|
[misc.c]
remove extra parens noticed by nicm
|
|
[misc.c]
use xasprintf instead of a series of strlcats and strdup. ok djm
|
|
user-group-modes.patch.
|
|
- Add support for multiple required authentication in SSH protocol 2 via
an AuthenticationMethods option (closes: #195716).
- Fix Sophie Germain formula in moduli(5) (closes: #698612).
- Update ssh-copy-id to Phil Hands' greatly revised version (closes:
#99785, #322228, #620428; LP: #518883, #835901, #1074798).
|
|
platforms, such as Android, that lack struct passwd.pw_gecos. Report
and initial patch from Nathan Osman bz#2086; feedback tim@ ok dtucker@
|
|
- Fix IPQoS not being set on non-mapped v4-in-v6 addressed connections
(closes: #643312, #650512).
- Add a new privilege separation sandbox implementation for Linux's new
seccomp sandbox, automatically enabled on platforms that support it.
(Note: privilege separation sandboxing is still experimental.)
|
|
[misc.c]
fix typo in IPQoS parsing: there is no "AF14" class, but there is
an "AF21" class. Spotted by giesen AT snickers.org; ok markus stevesk
|
|
- Introduce sandboxing of the pre-auth privsep child using an optional
sshd_config(5) "UsePrivilegeSeparation=sandbox" mode that enables
mandatory restrictions on the syscalls the privsep child can perform.
- Add new SHA256-based HMAC transport integrity modes from
http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt.
- The pre-authentication sshd(8) privilege separation slave process now
logs via a socket shared with the master process, avoiding the need to
maintain /dev/log inside the chroot (closes: #75043, #429243,
#599240).
- ssh(1) now warns when a server refuses X11 forwarding (closes:
#504757).
- sshd_config(5)'s AuthorizedKeysFile now accepts multiple paths,
separated by whitespace (closes: #76312). The authorized_keys2
fallback is deprecated but documented (closes: #560156).
- ssh(1) and sshd(8): set IPv6 traffic class from IPQoS, as well as IPv4
ToS/DSCP (closes: #498297).
- ssh-add(1) now accepts keys piped from standard input. E.g. "ssh-add
- < /path/to/key" (closes: #229124).
- Clean up lost-passphrase text in ssh-keygen(1) (closes: #444691).
- Say "required" rather than "recommended" in unprotected-private-key
warning (LP: #663455).
|
|
[misc.c misc.h servconf.c]
print ipqos friendly string for sshd -T; ok markus
# sshd -Tf sshd_config|grep ipqos
ipqos lowdelay throughput
|
|
- Implement Elliptic Curve Cryptography modes for key exchange (ECDH)
and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA
offer better performance than plain DH and DSA at the same equivalent
symmetric key length, as well as much shorter keys.
- sftp(1)/sftp-server(8): add a protocol extension to support a hard
link operation. It is available through the "ln" command in the
client. The old "ln" behaviour of creating a symlink is available
using its "-s" option or through the preexisting "symlink" command.
- scp(1): Add a new -3 option to scp: Copies between two remote hosts
are transferred through the local host (closes: #508613).
- ssh(1): "atomically" create the listening mux socket by binding it on
a temporary name and then linking it into position after listen() has
succeeded. This allows the mux clients to determine that the server
socket is either ready or stale without races (closes: #454784).
Stale server sockets are now automatically removed (closes: #523250).
- ssh(1): install a SIGCHLD handler to reap expired child process
(closes: #594687).
- ssh(1)/ssh-agent(1): honour $TMPDIR for client xauth and ssh-agent
temporary directories (closes: #357469, although only if you arrange
for ssh-agent to actually see $TMPDIR since the setgid bit will cause
it to be stripped off).
|
|
|
|
[clientloop.c misc.c misc.h ssh-agent.1 ssh-agent.c]
honour $TMPDIR for client xauth and ssh-agent temporary directories;
feedback and ok markus@
|
|
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
|
|
[misc.c misc.h configure.ac openbsd-compat/openbsd-compat.h]
[openbsd-compat/timingsafe_bcmp.c]
Add timingsafe_bcmp(3) to libc, mention that it's already in the
kernel in kern(9), and remove it from OpenSSH.
ok deraadt@, djm@
NB. re-added under openbsd-compat/ for portable OpenSSH
|
|
[atomicio.c atomicio.h misc.c misc.h scp.c sftp-client.c]
[sftp-client.h sftp.1 sftp.c]
add an option per-read/write callback to atomicio
factor out bandwidth limiting code from scp(1) into a generic bandwidth
limiter that can be attached using the atomicio callback mechanism
add a bandwidth limit option to sftp(1) using the above
"very nice" markus@
|
|
- Added a ControlPersist option to ssh_config(5) that automatically
starts a background ssh(1) multiplex master when connecting. This
connection can stay alive indefinitely, or can be set to automatically
close after a user-specified duration of inactivity (closes: #335697,
#350898, #454787, #500573, #550262).
- Support AuthorizedKeysFile, AuthorizedPrincipalsFile,
HostbasedUsesNameFromPacketOnly, and PermitTunnel in sshd_config(5)
Match blocks (closes: #549858).
- sftp(1): fix ls in working directories that contain globbing
characters in their pathnames (LP: #530714).
|
|
[misc.c]
sync timingsafe_bcmp() with the one dempsky@ committed to sys/lib/libkern
|
|
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c packet.c]
[ssh-rsa.c]
s/timing_safe_cmp/timingsafe_bcmp/g
|
|
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c]
[packet.c ssh-rsa.c]
implement a timing_safe_cmp() function to compare memory without leaking
timing information by short-circuiting like memcmp() and use it for
some of the more sensitive comparisons (though nothing high-value was
readily attackable anyway); "looks ok" markus@
|
|
[misc.c]
unbreak strdelim() skipping past quoted strings, e.g.
AllowUsers "blah blah" blah
was broken; report and fix in bz#1757 from bitman.zhou AT centrify.com
ok dtucker;
|
|
- djm@cvs.openbsd.org 2010/05/21 05:00:36
[misc.c]
colon() returns char*, so s/return (0)/return NULL/
|
|
memberships, and only allow group-writability by groups with exactly one
member, as zero-member groups are typically used by setgid binaries
rather than being user-private groups (closes: #581697).
|
|
group-writable, provided that the group in question contains only the
file's owner; this extends a patch previously applied to ~/.ssh/config
(closes: #581919).
|
|
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
|
|
Remove hacks add for RoutingDomain in preparation for its removal.
|
|
have it.
|
|
to eliminate an unused variable warning.
|
|
be created.
|
|
RoutingDomain an unsupported option on platforms that don't have it.
|
|
[readconf.c servconf.c misc.h ssh-keyscan.c misc.c]
validate routing domain is in range 0-RT_TABLEID_MAX.
'Looks right' deraadt@
|
|
[misc.c]
correct off-by-one in percent_expand(): we would fatal() when trying
to expand EXPAND_MAX_KEYS, allowing only EXPAND_MAX_KEYS-1 to actually
work. Note that nothing in OpenSSH actually uses close to this limit at
present. bz#1607 from Jan.Pechanec AT Sun.COM
|
|
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
|
|
set IPV6_V6ONLY for local forwarding with GatwayPorts=yes. Unify
setting IPV6_V6ONLY behind a new function misc.c:sock_set_v6only()
report and fix from jan.kratochvil AT redhat.com
|
|
- tobias@cvs.openbsd.org 2009/02/21 19:32:04
[misc.c sftp-server-main.c ssh-keygen.c]
Added missing newlines in error messages.
ok dtucker
|
|
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h]
[serverloop.c ssh-keyscan.c ssh.c sshd.c]
make a2port() return -1 when it encounters an invalid port number
rather than 0, which it will now treat as valid (needed for future work)
adjust current consumers of a2port() to check its return value is <= 0,
which in turn required some things to be converted from u_short => int
make use of int vs. u_short consistent in some other places too
feedback & ok markus@
|
|
[misc.c]
upcast uid to long with matching %ld, prevents warnings in portable
|
|
[sshd.c sshconnect.c packet.h misc.c misc.h packet.c]
Make keepalive timeouts apply while waiting for a packet, particularly
during key renegotiation (bz #1363). With djm and Matt Day, ok djm@
|
|
[misc.c]
spaces -> tabs from my previous commit
|
|
[servconf.c canohost.c misc.c channels.c sshconnect.c misc.h ssh-keyscan.c
sshd.c]
Add a small helper function to consistently handle the EAI_SYSTEM error
code of getaddrinfo. Prompted by vgiffin at apple com via bz #1417.
ok markus@ stevesk@
|
|
[misc.c sftp.c]
Don't access buf[strlen(buf) - 1] for zero-length strings.
``ok by me'' djm@.
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c]
[auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c]
[channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c]
[kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c]
[monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c]
[servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c]
[sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c]
[uuencode.h xmalloc.c]
move #include <stdio.h> out of includes.h
|
|
[authfd.c authfile.c dh.c canohost.c channels.c clientloop.c compat.c]
[hostfile.c kex.c log.c misc.c moduli.c monitor.c packet.c readpass.c]
[scp.c servconf.c session.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c sshconnect.c]
[sshconnect1.c sshd.c xmalloc.c]
move #include <stdlib.h> out of includes.h
|
