| Age | Commit message (Collapse) | Author |
|---|
|
[auth-options.c includes.h misc.c misc.h readconf.c servconf.c]
[serverloop.c ssh.c ssh_config.5 sshd_config.5 configure.ac]
two changes to the new ssh tunnel support. this breaks compatibility
with the initial commit but is required for a portable approach.
- make the tunnel id u_int and platform friendly, use predefined types.
- support configuration of layer 2 (ethernet) or layer 3
(point-to-point, default) modes. configuration is done using the
Tunnel (yes|point-to-point|ethernet|no) option is ssh_config(5) and
restricted by the PermitTunnel (yes|point-to-point|ethernet|no) option
in sshd_config(5).
ok djm@, man page bits by jmc@
|
|
[auth-options.c auth-options.h channels.c channels.h clientloop.c]
[misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h]
[serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c]
[sshconnect.h sshd.8 sshd_config sshd_config.5]
Add support for tun(4) forwarding over OpenSSH, based on an idea and
initial channel code bits by markus@. This is a simple and easy way to
use OpenSSH for ad hoc virtual private network connections, e.g.
administrative tunnels or secure wireless access. It's based on a new
ssh channel and works similar to the existing TCP forwarding support,
except that it depends on the tun(4) network interface on both ends of
the connection for layer 2 or layer 3 tunneling. This diff also adds
support for LocalCommand in the ssh(1) client.
ok djm@, markus@, jmc@ (manpages), tested and discussed with others
|
|
[sshd.c ssh.c misc.h sftp.c ssh-keygen.c ssh-keysign.c sftp-server.c
scp.c misc.c ssh-keyscan.c ssh-add.c ssh-agent.c]
ensure that stdio fds are attached; ok deraadt@
|
|
[misc.h]
use __sentinel__ attribute; ok deraadt@ djm@ markus@
|
|
[channels.c clientloop.c clientloop.h misc.c misc.h ssh.c ssh_config.5]
implement support for X11 and agent forwarding over multiplex slave
connections. Because of protocol limitations, the slave connections inherit
the master's DISPLAY and SSH_AUTH_SOCK rather than distinctly forwarding
their own.
ok dtucker@ "put it in" deraadt@
|
|
[auth.c auth.h misc.c misc.h ssh.c ssh_config.5 sshconnect.c]
introduce a generic %foo expansion function. replace existing % expansion
and add expansion to ControlPath; ok markus@
|
|
[misc.c misc.h tildexpand.c Makefile.in]
replace tilde_expand_filename with a simpler implementation, ahead of
more whacking; ok deraadt@
|
|
[auth-options.c channels.c channels.h clientloop.c compat.c compat.h]
[misc.c misc.h readconf.c readconf.h servconf.c ssh.1 ssh.c ssh_config.5]
[sshd_config.5]
bz#413: allow optional specification of bind address for port forwardings.
Patch originally by Dan Astorian, but worked on by several people
Adds GatewayPorts=clientspecified option on server to allow remote
forwards to bind to client-specified ports.
|
|
[auth-rsa.c auth2-pubkey.c authfile.c misc.c misc.h]
Fix debug call in error path of authorized_keys processing and fix related
warnings; ok djm@
|
|
[auth-rsa.c auth2-pubkey.c authfile.c misc.c misc.h ssh.h sshd.8]
Discard over-length authorized_keys entries rather than complaining when
they don't decode. bz #884, with & ok djm@
|
|
[clientloop.c misc.h readpass.c ssh-agent.c]
factor out common permission-asking code to separate function; ok markus@
|
|
[channels.c channels.h clientloop.c misc.c misc.h serverloop.c ssh-agent.c]
some signed/unsigned int comparison cleanups; markus@ ok
|
|
[clientloop.c misc.h readconf.c readpass.c ssh.c ssh_config.5]
Add option for confirmation (ControlMaster=ask) via ssh-askpass before
opening shared connections; ok markus@
|
|
[channels.c clientloop.c misc.c misc.h packet.c ssh-agent.c ssh-keyscan.c]
[sshd.c]
set_nonblock() instead of fnctl(...,O_NONBLOCK); "looks sane" deraadt@
|
|
[clientloop.c misc.h readpass.c scard.c ssh-add.c ssh-agent.c ssh-keygen.c
sshconnect.c sshconnect1.c sshconnect2.c] removed: readpass.h
kill a tiny header; ok deraadt@
|
|
[auth.c clientloop.c misc.h servconf.c ssh.c sshpty.h sshtty.c
tildexpand.c], removed: sshtty.h tildexpand.h
make two tiny header files go away; djm ok
|
|
openbsd-compat/bsd-misc.c, s/mysignal/signal/ and #define signal to
be our 'mysignal' by default. OK djm@
|
|
[auth-krb5.c auth-rh-rsa.c auth.c cipher.c key.c misc.h packet.c session.c
sftp-client.c sftp-glob.h sftp.c ssh-add.c ssh.c sshconnect2.c sshd.c
ttymodes.c]
KNF whitespace
|
|
- stevesk@cvs.openbsd.org 2002/01/24 21:09:25
[channels.c misc.c misc.h packet.c]
add set_nodelay() to set TCP_NODELAY on a socket (prep for nagle tuning).
no nagle changes just yet; ok djm@ markus@
|
|
|
|
[authfd.h authfile.h auth.h auth-options.h bufaux.h buffer.h
canohost.h channels.h cipher.h clientloop.h compat.h compress.h
crc32.h deattack.h dh.h dispatch.h groupaccess.c groupaccess.h
hostfile.h kex.h key.h log.c log.h mac.h misc.c misc.h mpaux.h
packet.h radix.h readconf.h readpass.h rsa.h servconf.h serverloop.h
session.h sftp-common.c sftp-common.h sftp-glob.h sftp-int.h
sshconnect.h ssh-dss.h sshlogin.h sshpty.h ssh-rsa.h sshtty.h
tildexpand.h uidswap.h uuencode.h xmalloc.h]
remove comments from .h, since they are cut&paste from the .c files
and out of sync
|
|
[atomicio.h authfd.h authfile.h auth.h auth-options.h bufaux.h
buffer.h canohost.h channels.h cipher.h clientloop.h compat.h
compress.h crc32.h deattack.h dh.h dispatch.h groupaccess.h
hostfile.h kex.h key.h log.h mac.h match.h misc.h mpaux.h packet.h
radix.h readconf.h readpass.h rsa.h]
prototype pedant. not very creative...
- () -> (void)
- no variable names
|
|
[misc.c misc.h servconf.c sshd.8 sshd.c]
sshd command-line arguments and configuration file options that
specify time may be expressed using a sequence of the form:
time[qualifier], where time is a positive integer value and qualifier
is one of the following:
<none>,s,m,h,d,w
Examples:
600 600 seconds (10 minutes)
10m 10 minutes
1h30m 1 hour 30 minutes (90 minutes)
ok markus@
|
|
[clientloop.c misc.c misc.h]
add unset_nonblock for stdout/err flushing in client_loop().
|
|
[misc.c misc.h scp.c sftp.c]
Use addargs() in sftp plus some clean up of addargs(). OK Markus
|
|
[misc.c misc.h scp.c sftp.c]
Move colon() and cleanhost() to misc.c where I should I have put it in
the first place
|
|
[misc.c misc.h readconf.c servconf.c ssh.c sshd.c]
robust port validation; ok markus@ jakob@
|
|
[auth.c auth.h auth1.c auth2.c misc.c misc.h ssh.c]
use pwcopy in ssh.c, too
|
|
SIGCHLD handler.
|
|
[atomicio.h canohost.h clientloop.h deattack.h dh.h dispatch.h
groupaccess.c groupaccess.h hmac.h hostfile.h includes.h kex.h
key.h log.h login.h match.h misc.h myproposal.h nchan.ms pathnames.h
radix.h readpass.h rijndael.h serverloop.h session.h sftp.h ssh-add.1
ssh-dss.h ssh-keygen.1 ssh-keyscan.1 ssh-rsa.h ssh1.h ssh_config
sshconnect.h sshd_config tildexpand.h uidswap.h uuencode.h]
$OpenBSD$
|
|
Linux and works. So that is at least a good sign. =)
20010122
- (bal) OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/19 12:45:26 GMT 2001 by markus
[servconf.c ssh.h sshd.c]
only auth-chall.c needs #ifdef SKEY
- markus@cvs.openbsd.org 2001/01/19 15:55:10 GMT 2001 by markus
[auth-krb4.c auth-options.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c
auth1.c auth2.c channels.c clientloop.c dh.c dispatch.c nchan.c
packet.c pathname.h readconf.c scp.c servconf.c serverloop.c
session.c ssh-add.c ssh-keygen.c ssh-keyscan.c ssh.c ssh.h
ssh1.h sshconnect1.c sshd.c ttymodes.c]
move ssh1 definitions to ssh1.h, pathnames to pathnames.h
- markus@cvs.openbsd.org 2001/01/19 16:48:14
[sshd.8]
fix typo; from stevesk@
- markus@cvs.openbsd.org 2001/01/19 16:50:58
[ssh-dss.c]
clear and free digest, make consistent with other code (use dlen); from
stevesk@
- markus@cvs.openbsd.org 2001/01/20 15:55:20 GMT 2001 by markus
[auth-options.c auth-options.h auth-rsa.c auth2.c]
pass the filename to auth_parse_options()
- markus@cvs.openbsd.org 2001/01/20 17:59:40 GMT 2001
[readconf.c]
fix SIGSEGV from -o ""; problem noted by jehsom@togetherweb.com
- stevesk@cvs.openbsd.org 2001/01/20 18:20:29
[sshconnect2.c]
dh_new_group() does not return NULL. ok markus@
- markus@cvs.openbsd.org 2001/01/20 21:33:42
[ssh-add.c]
do not loop forever if askpass does not exist; from
andrew@pimlott.ne.mediaone.net
- djm@cvs.openbsd.org 2001/01/20 23:00:56
[servconf.c]
Check for NULL return from strdelim; ok markus
- djm@cvs.openbsd.org 2001/01/20 23:02:07
[readconf.c]
KNF; ok markus
- jakob@cvs.openbsd.org 2001/01/21 9:00:33
[ssh-keygen.1]
remove -R flag; ok markus@
- markus@cvs.openbsd.org 2001/01/21 19:05:40
[atomicio.c automicio.h auth-chall.c auth-krb4.c auth-options.c
auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c
auth.c auth.h auth1.c auth2-chall.c auth2.c authfd.c authfile.c
bufaux.c bufaux.h buffer.c canahost.c canahost.h channels.c
cipher.c cli.c clientloop.c clientloop.h compat.c compress.c
deattack.c dh.c dispatch.c groupaccess.c hmac.c hostfile.c kex.c
key.c key.h log-client.c log-server.c log.c log.h login.c login.h
match.c misc.c misc.h nchan.c packet.c pty.c radix.h readconf.c
readpass.c readpass.h rsa.c scp.c servconf.c serverloop.c serverloop.h
session.c sftp-server.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c
ssh-keyscan.c ssh-rsa.c ssh.c ssh.h sshconnect.c sshconnect.h
sshconnect1.c sshconnect2.c sshd.c tildexpand.c tildexpand.h
ttysmodes.c uidswap.c xmalloc.c]
split ssh.h and try to cleanup the #include mess. remove unnecessary
#includes. rename util.[ch] -> misc.[ch]
- (bal) renamed 'PIDDIR' to '_PATH_SSH_PIDDIR' to match OpenBSD tree
- (bal) Moved #ifdef KRB4 in auth-krb4.c above the #include to resolve
conflict when compiling for non-kerb install
- (bal) removed the #ifdef SKEY in auth1.c to match Markus' changes
on 1/19.
|
