summaryrefslogtreecommitdiff
path: root/misc.h
AgeCommit message (Collapse)Author
2017-08-23upstream commitdjm@openbsd.org
add a "quiet" flag to exited_cleanly() that supresses errors about exit status (failure due to signal is still reported) Upstream-ID: db85c39c3aa08e6ff67fc1fb4ffa89f807a9d2f0
2017-08-23upstream commitdjm@openbsd.org
Move several subprocess-related functions from various locations to misc.c. Extend subprocess() to offer a little more control over stdio disposition. feedback & ok dtucker@ Upstream-ID: 3573dd7109d13ef9bd3bed93a3deb170fbfce049
2016-11-30upstream commitdtucker@openbsd.org
On startup, check to see if sshd is already daemonized and if so, skip the call to daemon() and do not rewrite the PidFile. This means that when sshd re-execs itself on SIGHUP the process ID will no longer change. Should address bz#2641. ok djm@ markus@. Upstream-ID: 5ea0355580056fb3b25c1fd6364307d9638a37b9
2016-10-24upstream commitdtucker@openbsd.org
Factor out "can bind to low ports" check into its own function. This will make it easier for Portable to support platforms with permissions models other than uid==0 (eg bz#2625). ok djm@, "doesn't offend me too much" deraadt@. Upstream-ID: 86213df4183e92b8f189a6d2dac858c994bfface
2016-09-12upstream commitderaadt@openbsd.org
Add MAXIMUM(), MINIMUM(), and ROUNDUP() to misc.h, then use those definitions rather than pulling <sys/param.h> and unknown namespace pollution. ok djm markus dtucker Upstream-ID: 712cafa816c9f012a61628b66b9fbd5687223fb8
2016-08-29upstream commitguenther@openbsd.org
Pull in <sys/time.h> for struct timeval ok deraadt@ Upstream-ID: ae34525485a173bccd61ac8eefeb91c57e3b7df6
2016-07-15upstream commitdjm@openbsd.org
Add a ProxyJump ssh_config(5) option and corresponding -J ssh(1) command-line flag to allow simplified indirection through a SSH bastion or "jump host". These options construct a proxy command that connects to the specified jump host(s) (more than one may be specified) and uses port-forwarding to establish a connection to the next destination. This codifies the safest way of indirecting connections through SSH servers and makes it easy to use. ok markus@ Upstream-ID: fa899cb8b26d889da8f142eb9774c1ea36b04397
2016-04-08upstream commitdjm@openbsd.org
don't record duplicate LocalForward and RemoteForward entries; fixes failure with ExitOnForwardFailure+hostname canonicalisation where the same forwards are added on the second pass through the configuration file. bz#2562; ok dtucker@ Upstream-ID: 40a51d68b6300f1cc61deecdb7d4847b8b7b0de1
2016-03-04upstream commitdtucker@openbsd.org
Improve precision of progressmeter for sftp and scp by storing sub-second timestamps. Pointed out by mmcc@, ok deraadt@ markus@ Upstream-ID: 38fd83a3d83dbf81c8ff7b5d1302382fe54970ab
2014-07-18 - millert@cvs.openbsd.org 2014/07/15 15:54:14Damien Miller
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c] [auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h] [clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c] [readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c] [ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c] [sshd_config.5 sshlogin.c] Add support for Unix domain socket forwarding. A remote TCP port may be forwarded to a local Unix domain socket and vice versa or both ends may be a Unix domain socket. This is a reimplementation of the streamlocal patches by William Ahern from: http://www.25thandclement.com/~william/projects/streamlocal.html OK djm@ markus@
2014-05-15 - djm@cvs.openbsd.org 2014/05/02 03:27:54Damien Miller
[chacha.h cipher-chachapoly.h digest.h hmac.h kex.h kexc25519.c] [misc.h poly1305.h ssh-pkcs11.c defines.h] revert __bounded change; it causes way more problems for portable than it solves; pointed out by dtucker@
2014-04-20 - djm@cvs.openbsd.org 2014/04/20 02:30:25Damien Miller
[misc.c misc.h umac.c] use get/put_u32 to load values rather than *((UINT32 *)p) that breaks on strict-alignment architectures; reported by and ok stsp@
2014-04-20 - djm@cvs.openbsd.org 2014/03/26 04:55:35Damien Miller
[chacha.h cipher-chachapoly.h digest.h hmac.h kex.h kexc25519.c [misc.h poly1305.h ssh-pkcs11.c] use __bounded(...) attribute recently added to sys/cdefs.h instead of longform __attribute__(__bounded(...)); for brevity and a warning free compilation with llvm/clang
2013-10-15 - djm@cvs.openbsd.org 2013/10/14 23:28:23Damien Miller
[canohost.c misc.c misc.h readconf.c sftp-server.c ssh.c] refactor client config code a little: add multistate option partsing to readconf.c, similar to servconf.c's existing code. move checking of options that accept "none" as an argument to readconf.c add a lowercase() function and use it instead of explicit tolower() in loops part of a larger diff that was ok markus@
2013-06-02 - dtucker@cvs.openbsd.org 2013/06/01 13:15:52Darren Tucker
[ssh-agent.c clientloop.c misc.h packet.c progressmeter.c misc.c channels.c sandbox-systrace.c] Use clock_gettime(CLOCK_MONOTONIC ...) for ssh timers so that things like keepalives and rekeying will work properly over clock steps. Suggested by markus@, "looks good" djm@.
2011-05-05 - stevesk@cvs.openbsd.org 2011/03/29 18:54:17Damien Miller
[misc.c misc.h servconf.c] print ipqos friendly string for sshd -T; ok markus # sshd -Tf sshd_config|grep ipqos ipqos lowdelay throughput
2010-12-01 - djm@cvs.openbsd.org 2010/11/21 01:01:13Damien Miller
[clientloop.c misc.c misc.h ssh-agent.1 ssh-agent.c] honour $TMPDIR for client xauth and ssh-agent temporary directories; feedback and ok markus@
2010-11-20 - djm@cvs.openbsd.org 2010/11/13 23:27:51Damien Miller
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h] [servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5] allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of hardcoding lowdelay/throughput. bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
2010-10-07 - matthew@cvs.openbsd.org 2010/09/24 13:33:00Damien Miller
[misc.c misc.h configure.ac openbsd-compat/openbsd-compat.h] [openbsd-compat/timingsafe_bcmp.c] Add timingsafe_bcmp(3) to libc, mention that it's already in the kernel in kern(9), and remove it from OpenSSH. ok deraadt@, djm@ NB. re-added under openbsd-compat/ for portable OpenSSH
2010-09-24 - djm@cvs.openbsd.org 2010/09/22 22:58:51Damien Miller
[atomicio.c atomicio.h misc.c misc.h scp.c sftp-client.c] [sftp-client.h sftp.1 sftp.c] add an option per-read/write callback to atomicio factor out bandwidth limiting code from scp(1) into a generic bandwidth limiter that can be attached using the atomicio callback mechanism add a bandwidth limit option to sftp(1) using the above "very nice" markus@
2010-07-16 - djm@cvs.openbsd.org 2010/07/13 23:13:16Damien Miller
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c packet.c] [ssh-rsa.c] s/timing_safe_cmp/timingsafe_bcmp/g
2010-07-16 - djm@cvs.openbsd.org 2010/07/13 11:52:06Damien Miller
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c] [packet.c ssh-rsa.c] implement a timing_safe_cmp() function to compare memory without leaking timing information by short-circuiting like memcmp() and use it for some of the more sensitive comparisons (though nothing high-value was readily attackable anyway); "looks ok" markus@
2010-01-10 - dtucker@cvs.openbsd.org 2010/01/09 23:04:13Darren Tucker
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c readconf.h scp.1 sftp.1 ssh_config.5 misc.h] Remove RoutingDomain from ssh since it's now not needed. It can be replaced with "route exec" or "nc -V" as a proxycommand. "route exec" also ensures that trafic such as DNS lookups stays withing the specified routingdomain. For example (from reyk): # route -T 2 exec /usr/sbin/sshd or inherited from the parent process $ route -T 2 exec sh $ ssh 10.1.2.3 ok deraadt@ markus@ stevesk@ reyk@
2010-01-08 - stevesk@cvs.openbsd.org 2009/12/25 19:40:21Darren Tucker
[readconf.c servconf.c misc.h ssh-keyscan.c misc.c] validate routing domain is in range 0-RT_TABLEID_MAX. 'Looks right' deraadt@
2010-01-08 - reyk@cvs.openbsd.org 2009/10/28 16:38:18Darren Tucker
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1 sftp.1 sshd_config.5 readconf.c ssh.c misc.c] Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan. ok markus@
2009-11-18 - (djm) [channels.c misc.c misc.h sshd.c] add missing setsockopt() toDamien Miller
set IPV6_V6ONLY for local forwarding with GatwayPorts=yes. Unify setting IPV6_V6ONLY behind a new function misc.c:sock_set_v6only() report and fix from jan.kratochvil AT redhat.com
2008-06-13 - dtucker@cvs.openbsd.org 2008/06/12 20:38:28Darren Tucker
[sshd.c sshconnect.c packet.h misc.c misc.h packet.c] Make keepalive timeouts apply while waiting for a packet, particularly during key renegotiation (bz #1363). With djm and Matt Day, ok djm@
2007-12-29 - dtucker@cvs.openbsd.org 2007/12/27 14:22:08Darren Tucker
[servconf.c canohost.c misc.c channels.c sshconnect.c misc.h ssh-keyscan.c sshd.c] Add a small helper function to consistently handle the EAI_SYSTEM error code of getaddrinfo. Prompted by vgiffin at apple com via bz #1417. ok markus@ stevesk@
2006-08-19 - djm@cvs.openbsd.org 2006/08/18 10:27:16Damien Miller
[misc.h] reorder so prototypes are sorted by the files they refer to; no binary change
2006-08-05 - deraadt@cvs.openbsd.org 2006/08/03 03:34:42Damien Miller
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c] [auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ] [auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c] [buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c] [groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c] [key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c] [monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c] [readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h] [serverloop.c session.c session.h sftp-client.c sftp-common.c] [sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c] [ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c] [uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h] [loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h] almost entirely get rid of the culture of ".h files that include .h files" ok djm, sort of ok stevesk makes the pain stop in one easy step NB. portable commit contains everything *except* removing includes.h, as that will take a fair bit more work as we move headers that are required for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-08-05 - stevesk@cvs.openbsd.org 2006/08/01 23:22:48Damien Miller
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c] [auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c] [channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c] [kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c] [monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c] [servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c] [uuencode.h xmalloc.c] move #include <stdio.h> out of includes.h
2006-07-10 - dtucker@cvs.openbsd.org 2006/07/10 12:46:51Darren Tucker
[misc.c misc.h sshd.8 sshconnect.c] Add port identifier to known_hosts for non-default ports, based originally on a patch from Devin Nate in bz#910. For any connection using the default port or using a HostKeyAlias the format is unchanged, otherwise the host name or address is enclosed within square brackets in the same format as sshd's ListenAddress. Tested by many, ok markus@.
2006-07-10 - stevesk@cvs.openbsd.org 2006/07/06 16:03:53Damien Miller
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c] [auth-rhosts.c auth-rsa.c auth.c auth.h auth2-hostbased.c] [auth2-pubkey.c auth2.c includes.h misc.c misc.h monitor.c] [monitor_wrap.c monitor_wrap.h scp.c serverloop.c session.c] [session.h sftp-common.c ssh-add.c ssh-keygen.c ssh-keysign.c] [ssh.c sshconnect.c sshconnect.h sshd.c sshpty.c sshpty.h uidswap.c] [uidswap.h] move #include <pwd.h> out of includes.h; ok markus@
2006-03-31 - djm@cvs.openbsd.org 2006/03/30 09:58:16Damien Miller
[authfd.c bufaux.c deattack.c gss-serv.c mac.c misc.c misc.h] [monitor_wrap.c msg.c packet.c sftp-client.c sftp-server.c ssh-agent.c] replace {GET,PUT}_XXBIT macros with functionally similar functions, silencing a heap of lint warnings. also allows them to use __bounded__ checking which can't be applied to macros; requested by and feedback from deraadt@
2006-03-26 - djm@cvs.openbsd.org 2006/03/25 22:22:43Damien Miller
[atomicio.h auth-options.h auth.h auth2-gss.c authfd.h authfile.h] [bufaux.h buffer.h canohost.h channels.h cipher.h clientloop.h] [compat.h compress.h crc32.c crc32.h deattack.h dh.h dispatch.h] [dns.c dns.h getput.h groupaccess.h gss-genr.c gss-serv-krb5.c] [gss-serv.c hostfile.h includes.h kex.h key.h log.h mac.h match.h] [misc.h monitor.h monitor_fdpass.h monitor_mm.h monitor_wrap.h msg.h] [myproposal.h packet.h pathnames.h progressmeter.h readconf.h rsa.h] [scard.h servconf.h serverloop.h session.h sftp-common.h sftp.h] [ssh-gss.h ssh.h ssh1.h ssh2.h sshconnect.h sshlogin.h sshpty.h] [ttymodes.h uidswap.h uuencode.h xmalloc.h] standardise spacing in $OpenBSD$ tags; requested by deraadt@
2006-01-31 - djm@cvs.openbsd.org 2006/01/31 10:19:02Damien Miller
[misc.c misc.h scp.c sftp.c] fix local arbitrary command execution vulnerability on local/local and remote/remote copies (CVE-2006-0225, bz #1094), patch by t8m AT centrum.cz, polished by dtucker@ and myself; ok markus@
2005-12-13 - reyk@cvs.openbsd.org 2005/12/08 18:34:11Damien Miller
[auth-options.c includes.h misc.c misc.h readconf.c servconf.c] [serverloop.c ssh.c ssh_config.5 sshd_config.5 configure.ac] two changes to the new ssh tunnel support. this breaks compatibility with the initial commit but is required for a portable approach. - make the tunnel id u_int and platform friendly, use predefined types. - support configuration of layer 2 (ethernet) or layer 3 (point-to-point, default) modes. configuration is done using the Tunnel (yes|point-to-point|ethernet|no) option is ssh_config(5) and restricted by the PermitTunnel (yes|point-to-point|ethernet|no) option in sshd_config(5). ok djm@, man page bits by jmc@
2005-12-13 - reyk@cvs.openbsd.org 2005/12/06 22:38:28Damien Miller
[auth-options.c auth-options.h channels.c channels.h clientloop.c] [misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h] [serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c] [sshconnect.h sshd.8 sshd_config sshd_config.5] Add support for tun(4) forwarding over OpenSSH, based on an idea and initial channel code bits by markus@. This is a simple and easy way to use OpenSSH for ad hoc virtual private network connections, e.g. administrative tunnels or secure wireless access. It's based on a new ssh channel and works similar to the existing TCP forwarding support, except that it depends on the tun(4) network interface on both ends of the connection for layer 2 or layer 3 tunneling. This diff also adds support for LocalCommand in the ssh(1) client. ok djm@, markus@, jmc@ (manpages), tested and discussed with others
2005-10-03 - djm@cvs.openbsd.org 2005/09/13 23:40:07Darren Tucker
[sshd.c ssh.c misc.h sftp.c ssh-keygen.c ssh-keysign.c sftp-server.c scp.c misc.c ssh-keyscan.c ssh-add.c ssh-agent.c] ensure that stdio fds are attached; ok deraadt@
2005-07-14 - dtucker@cvs.openbsd.org 2005/07/14 04:00:43Darren Tucker
[misc.h] use __sentinel__ attribute; ok deraadt@ djm@ markus@
2005-07-06 - djm@cvs.openbsd.org 2005/07/04 00:58:43Damien Miller
[channels.c clientloop.c clientloop.h misc.c misc.h ssh.c ssh_config.5] implement support for X11 and agent forwarding over multiplex slave connections. Because of protocol limitations, the slave connections inherit the master's DISPLAY and SSH_AUTH_SOCK rather than distinctly forwarding their own. ok dtucker@ "put it in" deraadt@
2005-06-16 - djm@cvs.openbsd.org 2005/06/06 11:20:36Damien Miller
[auth.c auth.h misc.c misc.h ssh.c ssh_config.5 sshconnect.c] introduce a generic %foo expansion function. replace existing % expansion and add expansion to ControlPath; ok markus@
2005-05-26 - djm@cvs.openbsd.org 2005/04/09 04:32:54Damien Miller
[misc.c misc.h tildexpand.c Makefile.in] replace tilde_expand_filename with a simpler implementation, ahead of more whacking; ok deraadt@
2005-03-01 - djm@cvs.openbsd.org 2005/03/01 10:09:52Damien Miller
[auth-options.c channels.c channels.h clientloop.c compat.c compat.h] [misc.c misc.h readconf.c readconf.h servconf.c ssh.1 ssh.c ssh_config.5] [sshd_config.5] bz#413: allow optional specification of bind address for port forwardings. Patch originally by Dan Astorian, but worked on by several people Adds GatewayPorts=clientspecified option on server to allow remote forwards to bind to client-specified ports.
2004-12-11 - dtucker@cvs.openbsd.org 2004/12/11 01:48:56Darren Tucker
[auth-rsa.c auth2-pubkey.c authfile.c misc.c misc.h] Fix debug call in error path of authorized_keys processing and fix related warnings; ok djm@
2004-12-06 - dtucker@cvs.openbsd.org 2004/12/06 11:41:03Darren Tucker
[auth-rsa.c auth2-pubkey.c authfile.c misc.c misc.h ssh.h sshd.8] Discard over-length authorized_keys entries rather than complaining when they don't decode. bz #884, with & ok djm@
2004-11-05 - djm@cvs.openbsd.org 2004/10/29 22:53:56Darren Tucker
[clientloop.c misc.h readpass.c ssh-agent.c] factor out common permission-asking code to separate function; ok markus@
2004-08-13 - avsm@cvs.openbsd.org 2004/08/11 21:43:05Darren Tucker
[channels.c channels.h clientloop.c misc.c misc.h serverloop.c ssh-agent.c] some signed/unsigned int comparison cleanups; markus@ ok
2004-06-18 - djm@cvs.openbsd.org 2004/06/17 15:10:14Damien Miller
[clientloop.c misc.h readconf.c readpass.c ssh.c ssh_config.5] Add option for confirmation (ControlMaster=ask) via ssh-askpass before opening shared connections; ok markus@
2004-06-15 - djm@cvs.openbsd.org 2004/06/14 01:44:39Damien Miller
[channels.c clientloop.c misc.c misc.h packet.c ssh-agent.c ssh-keyscan.c] [sshd.c] set_nonblock() instead of fnctl(...,O_NONBLOCK); "looks sane" deraadt@